Removal of some cationic dyes from aqueous solutions using magnetic-modified multi-walled carbon nanotubes

Large-scale fabrication of N-doped porous carbon nanosheets for dye adsorption and supercapacitor applications

The development of novel large-scale synthesis protocols for heteroatom-doped porous carbon nanosheets is highly imperative for wastewater purification and high-performance electrode materials. In the present work, we propose a simple and feasible explosion-assisted activation strategy to fabricate a kind of N-doped porous carbon nanosheet (N-PCNS) at a large scale, in which only lactose and zinc nitrate were used as raw materials. The obtained N-PCNS possesses hierarchical micro- and mesopore nanostructures with a high specific surface area of 879 m2 g-1 while keeping a high nitrogen content of 3.73 at%. The adsorption properties of the N-PCNS were systematically evaluated through adsorption of neutral red (NR) dye. The adsorption capacity of the N-PCNS was as high as 439.6 mg g-1, meanwhile the adsorption process exhibited fine correlation with the Langmuir isotherm and pseudo-second-order kinetic models. As an electrode material for supercapacitors, the specific capacitance of the N-PCNS is up to 263 F g-1 at 1 A g-1 and 194 F g-1 at 20 A g-1, revealing superior rate performance. The capacitance retention after 10 000 cycles at 20 A g-1 is 96%, demonstrating excellent cycling stability. Our work provides an effective approach to achieve the large-scale preparation of high-performance doped carbon materials.

Construction of Ni-doped SnO2-SnS2 heterojunctions with synergistic effect for enhanced photodegradation activity

Construction of heterostructures with proper band alignment and effective transport and separation of photogenerated charges is highly expected for photocatalysis. In this work, Ni-doped SnO₂-SnS₂ heterostructures (NiSnSO) are simply prepared by thermal oxidation of Ni-doped hierarchical SnS₂ microspheres in the air. When applied for the photodegradation of organic contaminants, these NiSnSO exhibit excellent catalytic performance and stability due to the following advantages: (1) Ni doping leads to the enhancement of light harvesting of SnS₂ in the visible light regions; (2) the formed heterojunctions promote the transport and separation of photogenerated electrons from SnS₂ to SnO₂; (3) Ni-SnO₂ quantum dots facilitate the enrichment of reactants, provide more reactive centers and accelerate product diffusion in the reactive centers; (4) the SnS₂ hierarchical microspheres constituted by nanoplates provide abundant active sites, high structural void porosity and accessible inner surface to faciliate the catalytic reactions. As a result, the optimized NiSnSO can photodegrade 92.7% methyl orange within 80 min under the irradiation of simulated sunlight, greatly higher than those of pure SnS₂ (29.8%) and Ni-doped SnS₂ (52.1%). These results reveal that the combination of heteroatom doping and heterostructure fabrication is a very promising strategy to deliver nanomaterials for effectively photocatalytic applications.

Adsorption and desorption of crystal violet and basic red 9 by multi-walled carbon nanotubes

Batch adsorption and desorption of crystal violet (CV) and basic red 9 (BR9) on multi-walled carbon nanotubes (MWCNTs) were conducted. To investigate the possible mechanisms of adsorption/desorption hysteresis, oxidized MWCNTs (O-MWCNTs) with more oxygen-containing groups were obtained by oxidizing as-purchased MWCNTs (A-MWCNTs) using nitric acid. The adsorption kinetics could be described by the pseudo-second-order model, suggesting that chemical reactions are the rate-limiting steps. The adsorption isotherms were fitted well by the Langmuir model, which suggests that, in addition to π-π interactions, chemical reactions significantly affect the adsorption. The adsorption capacity decreased in the order of CV on A-MWCNTs, BR9 on A-MWCNTs, and BR9 on O-MWCNTs, possibly because the amidation between BR9 and the surface groups of MWCNTs results in steric hindrance, which limits the adsorption of BR9 to inner grooves between CNT bundles. Adsorption/desorption hysteresis was observed for BR9 but not for CV. It was found that the π-π interaction and molecular entrapment were not responsible for the adsorption/desorption hysteresis. The hysteresis might be caused by the irreversible amide bonds between BR9 and MWCNTs. The results indicate that the steric hindrance due to the three-dimensional structure of organic compounds plays an important role in both adsorption/desorption kinetics and equilibria.

Adsorption behaviors of methylene blue on sunflower stem pith

Adsorption behaviors of methylene blue (MB) from aqueous solution using sunflower stem pith (SSP) as adsorbent were investigated. The effects of adsorption conditions such as adsorption time, initial concentration of MB and dosage of SSP on the detoxification of MB were examined. The equilibrium adsorption data were analyzed using three well-known isotherms: Langmuir, Freundlich and Temkin. The results indicated that the Langmuir isotherm fitted well to the data as compared with another isotherm model. The maximum adsorption capacity calculated by the Langmuir isotherm model was 277 mg/g at 338 K. Kinetic analyses were conducted using pseudo first order, pseudo second order and the Elovich model. The regression results showed that the MB adsorption was described by the pseudo second order model. Different thermodynamic parameters such as Gibb's free energy (ΔG^o), standard enthalpy change (ΔH^o) and standard entropy change (ΔS^o) were also evaluated. The results showed that the detoxification of MB using SSP as adsorbent was feasible, non-spontaneous and exothermic under experimental conditions.

Removing Pb(II) Ions from Aqueous Solution by a Promising Absorbent of Tannin-Immobilized Cellulose Microspheres

Tannin/cellulose microspheres (T/C) were successfully prepared via a facile homogeneous reaction in a water/oil (W/O) emulsion for removing Pb(II) ions from aqueous solution. The structure of the microspheres was characterized by scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, and a zeta potential test. The effects of pH, adsorbent dosage, contact time, and temperature on adsorption ability were investigated. The results showed that T/C microspheres could combine Pb(II)ions via electrostatic attractions and physical adsorption. Adsorption kinetics could be better described by the pseudo-second-order kinetic model. The adsorption behaviors were in agreement with the Langmuir adsorption isotherm model with a fitting correlation coefficient of 0.9992. The maximum adsorption capacity was 23.75 mg/g from the Langmuir isotherm evaluation at 308K with an initial pH of 5. The results suggested that tannin/cellulose microspheres could be a low-cost and effective adsorbent for removing Pb(II) ions from aqueous solution.

Environmental Remediation Applications of Carbon Nanotubes and Graphene Oxide: Adsorption and Catalysis

Environmental issues such as the wastewater have influenced each aspect of our lives. Coupling the existing remediation solutions with exploring new functional carbon nanomaterials (e.g., carbon nanotubes, graphene oxide, graphene) by various perspectives shall open up a new venue to understand the environmental issues, phenomenon and find out the ways to get along with the nature. This review makes an attempt to provide an overview of potential environmental remediation solutions to the diverse challenges happening by using low-dimensional carbon nanomaterials and their composites as adsorbents, catalysts or catalysts support towards for the social sustainability.

Endotoxin removal from aqueous solutions with dimethylamine-functionalized graphene oxide: Modeling study and optimization of adsorption parameters

Novel graphene oxide (GO)-based adsorbent embedded with epichlorohydrin (ECH) as a coupling agent and dimethylamine (DMA) as a ligand (GO-ECH-DMA) were prepared and employed for endotoxin removal from aqueous solutions. The physicochemical properties of nanocomposite were fully characterized. The model attributed to batch adsorption process was optimized employing response surface methodology (RSM) via various parameters such as pH, GO-ECH-DMA dosage, and contact time and endotoxin concentration. The p-value with low probability (<0.00001), determination coefficient (R²=0.99) and the non-significant lack of fit (p > 0.05) showed a quadratic model with a good fit with experimental terms. The synergistic effects of the linear term of contact time and GO-ECH-DMA dosage on endotoxin removal were significant. The optimum condition for endotoxin removal was obtained at pH of 5.52, GO-ECH-DMA dosage of 21 mgL^-1, contact time of 56 min and endotoxin concentration of 51.3 endotoxin units per milliliter (EUmL^-1). The equilibrium was the better explained by Langmuir isotherm with the maximum monolayer adsorption capacity of 121.47 EUmg-1, while the kinetics of the endotoxin adsorption process was followed by the pseudo-second-order model. The adsorbent could be recycled with NaOH. The possible mechanisms of endotoxin adsorption were proposed by hydrogen-bonding, π-π stacking, and electrostatic interaction.

Polyaniline-derived porous carbons: Remarkable adsorbent for removal of various hazardous organics from both aqueous and non-aqueous media

Polyaniline (pANI) was pyrolyzed under a nitrogen atmosphere to get porous pANI-derived carbons (PDCs). To increase the porosity of the carbons further, the PDCs were activated at 600-800 °C in the presence of KOH. The obtained PDCs were firstly applied in liquid-phase adsorptions in order to remove hazardous organics from both water and fuel effectively via adsorption. PDC-700, activated at 700 °C, showed record high adsorption capacities from water for the removal of hazardous organics such as diethyl phthalate and Janus Green B, as representative organics for industrial chemicals (endocrine disturbing agent) and organic dyes, respectively. Moreover, PDC-700 had record high adsorption capacity for the removal of 4,6-dimethyldibenzothiophene from a model fuel. The plausible mechanisms were also suggested to explain the remarkable adsorptions both from water and fuel. The adsorbents could be regenerated in a facile way and reused in adsorption up to several cycles. Therefore, the PDCs could be suggested as a new class of adsorbents for the purification of both water contaminated with organics and fuel having a high concentration of thiophenics.

Theoretical and experimental adsorption studies of sulfamethoxazole and ketoprofen on synthesized ionic liquids modified CNTs

The adsorption of sulfamethoxazole (SMZ) and ketoprofen (KET) using carbon nanotubes (CNTs) and CNTs modified with ionic liquids (ILs) was investigated. Two ionic liquids (1-benzyl, 3-hexyl imidazolium, IL1 and 1-benzyl, 3-decahexyl imidazolium, IL2) were synthesized, and characterized by nuclear magnetic resonance (¹H and ¹³C NMR) and high resolution-mass spectrometry (HR-MS). CNTs and modified CNTs were characterized using FT-IR, X-ray diffraction (XRD), surface area and porosity analysis, thermal gravimetric analysis (TGA), Zeta potential, Raman and scanning electron microscopy (SEM). Kinetics, isotherm and computational studies were carried out to determine the efficiency and adsorption mechanism of SMZ and KET on modified CNTs. A density functional theory (DFT) method was applied to shed more light on the interactions between the pharmaceutical compounds and the adsorbents at the molecular level. The effects of adsorbent dosage, concentration, solution pH, energetics and contact time of SMZ and KET on the adsorption process were investigated. The adsorption of SMZ and KET on CNTs and modified CNTs were pH dependent, and adsorption was best described by pseudo-second-order kinetics and the Freundlich adsorption isotherm. Ionic liquid modified CNTs showed improved adsorption capacities compared to the unmodified ones for both SMZ and KET, which is in line with the computational results showing performance order; CNT+KET/SMZ < CNT-ILs+SMZ < CNT-ILs+KET.

Molybdenum Trioxide: Efficient Nanosorbent for Removal of Methylene Blue Dye from Aqueous Solutions

Nano Molybdenum trioxide (α-MoO₃) was synthesized in an easy and efficient approach. The removal of methylene blue (MB) in aqueous solutions was studied using this material. The effects of various experimental parameters, for example contact time, pH, temperature and initial MB concentration on removal capacity were explored. The removal of MB was significantly affected by pH and temperature and higher values resulted in increase of removal capacity of MB. The removal efficiency of Methylene blue was 100% at pH = 11 for initial dye concentrations lower than 150 ppm, with a maximum removal capacity of 152 mg/g of MB as gathered from Langmuir model. By comparing the kinetic models (pseudo first-order, pseudo second-order and intraparticle diffusion model) at various conditions, it has been found that the pseudo second-order kinetic model correlates with the experimental data well. The thermodynamic study indicated that the removal was endothermic, spontaneous and favorable. The thermal regeneration studies indicated that the removal efficiency (99%) was maintained after four cycles of use. Fourier Transform Infrared (FTIR) and Scanning Electron Microscopy (SEM) confirmed the presence of the MB dye on the α-MoO₃ nanoparticles after adsorption and regeneration. The α-MoO₃ nanosorbent showed excellent removal efficiency before and after regeneration, suggesting that it can be used as a promising adsorbent for removing Methylene blue dye from wastewater.

Synthesis of Co3O4/graphene nanocomposite using paraffin wax for adsorption of methyl violet in water

This study discusses the use of Co3O4 impregnated graphene (CoOIG) as an efficient adsorbent for the removal of methyl violet (MV) dye from wastewater. CoOIG nanocomposites have been prepared by pyrolyzing paraffin wax with cobalt acetate. The synthesised nanocomposite was characterised by X-ray diffraction, field emission scanning electron microscope, transmission electron microscope, Fourier transform infrared spectroscope, Raman spectroscopy, and Brunauer-Emmett-Teller isotherm studies. The above studies indicate that the composites have cobalt oxide nanoparticles of size 51-58 nm embedded in the graphene nanoparticles. The adsorption studies were conducted with various parameters, pH, temperature and initial dye concentration, adsorbent dosage and contact time by the batch method. The adsorption of MV dye by the adsorbent CoOIG was about 90% initially at 15 min and 98% dye removal at pH 5. The data were fitted in Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich and Sips isotherm models. Various thermodynamic parameters like Gibbs free energy, enthalpy, and entropy of the on-going adsorption process have also been calculated.

Kinetics, Isotherm, and Thermodynamic Studies of Methylene Blue Adsorption on Polyaniline and Polypyrrole Macro-Nanoparticles Synthesized by C-Dot-Initiated Polymerization

This work unraveled kinetics, isotherm, and thermodynamic properties of methylene blue (MB) adsorbed on polyaniline (PANI) and polypyrrole (PPY). The two polymers, PANI and PPY, synthesized by a facile C-dot (CD)-initiated polymerization method have been proven as the effective adsorbent materials to remove MB from wastewater. This dye model is also generally employed as a redox indicator in analytical chemistry and exhibits blue in an oxidizing environment, but it is colorless when exposed to a reducing agent. The effects of temperature, adsorbent amount contact time, and dye concentration were consistently examined. The adsorption capacity of the polymers at 28 °C could reach 19.2 mg/g. The adsorption equilibrium of the dye was attained after 90 and 120 min of contact time with PANI and PPY, respectively. The equilibrium details were well described by Freundlich and Langmuir isotherms. Results showed that PANI and PPY prepared using CD-initiated polymerization are better adsorbents compared to the commercial PANI powder for the removal of MB from water.

Bio-inspired functionalization of microcrystalline cellulose aerogel with high adsorption performance toward dyes

As one of the materials from natural resources, the functionalization and application of cellulose attract increasing concerns. In this work, we reported a facile method to prepare the bio-inspired functionalization of microcrystalline cellulose (MCC) aerogel through polydopamine (PDA) coating, which was realized via the self-polymerization of dopamine in the MCC/LiBr solution followed by the freeze-drying technology. The morphological characterization showed that the pore morphologies of the compounded aerogel were influenced by the content of PDA. Adsorption measurements toward methylene blue (MB) showed that the compounded aerogel had high adsorption ability. Moreover, the compounded MCC/PDA aerogel exhibited excellent adsorption selectivity and it exhibited high efficiency to remove MB from different solutions, such as the mixed solution with anionic dyestuffs, the mixed solution with cationic dyestuffs and the mixed solution with common salt (NaCl). The high adsorption ability and excellent adsorption selectivity endows the compounded MCC/PDA aerogel with great potential applications in wastewater treatment.

The formation of hybrid carbon nanomaterial by chemical vapor deposition: an efficient adsorbent for enhanced removal of methylene blue from aqueous solution

In this study, carbon species were grown on the surface of Ni-impregnated powder activated carbon to form a novel hybrid carbon nanomaterial by chemical vapor deposition. The carbon nanomaterial was obtained by the precipitation of the methane elemental carbon atoms on the surface of the Ni catalyst. The physiochemical properties of the hybrid material were characterized to illustrate the successful growth of carbon species on the carbon substrate. The response surface methodology was used for the evaluation of adsorption parameters effect such as pH, adsorbent dose and contact time on the percentage removal of MB dye from aqueous solution. The optimum conditions were found to be pH = 11, adsorbent dose = 15 mg and contact time of 120 min. The material we prepared showed excellent removal efficiency of 96% for initial MB concentration of 50 mg/L. The adsorption of MB was described accurately by the pseudo-second-order model with R² of 0.998 and q_e of 163.93 (mg/g). The adsorption system showed the best agreement with Langmuir model with R² of 0.989 and maximum adsorption capacity (Q_m) of 250 mg/g.

Preparation and characterization of γ-Fe2O3 nanoparticles and investigation of its adsorption performance for sulfide, sulfite and thiosulfate from aqueous solutions using ultrasonic assisted method: Modeling and optimization

Maghemite nanoparticles, as an adsorbent, was used for the removal of sulfur species including sulfide, sulfite and thiosulfate from waste water samples by ultrasonic-assisted adsorption method. The characterization of the prepared nanoparticles was carried out by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction and BET technique. The nanoparticles well dispersed in the water. The adsorbent was easily separated magnetically from the solution after loading with adsorbate. According to central composite design, the best experimental conditions including initial pH, the dosage of adsorbent and sonication time were obtained for sulfide, sulfite and thiosulfate. After optimization of the parameters, the removal of analytes in these conditions lead to the highest analytes removal efficiency (above 98%). The adsorption capacity was evaluated using different adsorption isotherm models. The maximum predicted adsorption capacities for sulfide, sulfite and thiosulfate were obtained as 148.5, 122.5 and 119.6mgg^-1, respectively. Then, desorption process of the adsorbed thiosulfate was also investigated using sodium hydroxide solution as the solvent and the other conditions affect to desorption were optimized.

Adsorption performance of polydopamine-modified attapulgite granular adsorbent for methylene blue

Polydopamine-modified granule organo-attapulgite adsorbent (PDA-GOAT) was facilely prepared via a dip-coating approach. The samples were characterized by scanning electron microscopy, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. Surface area and pore size were calculated from the Brunauer-Emmett-Teller method by N₂ adsorption-desorption isotherm. The adsorption behaviour of methylene blue (MB) onto PDA-GOAT was systematically investigated. The experimental data revealed that the adsorption process fitted well with the pseudo-second-order kinetics equation and the adsorption isotherm fitted better with the Langmuir model. Thermodynamic analyses illustrated that MB adsorption onto PDA-GOAT was a physisorption endothermic process. Importantly, PDA-GOAT can be regenerated by NaBH₄ aqueous solution. The obtained results prove that PDA-GOAT can be a superior reusable adsorbent for the removal of MB from effluent.

Preparation and catalytic performance of copper-containing magnetic catalysts for degradation of azo dye (direct violet)

A novel magnetically separable magnetic activated carbon supporting-copper (MCAC) catalyst for catalytic wet peroxide oxidation (CWPO) was prepared by chemical impregnation. The prepared samples were characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) method, and scanning electron microscopy (SEM) equipped with energy dispersive spectrometry (EDS). The catalytic performance of the catalysts was evaluated by direct violet (D-BL) degradation in CWPO experiments. The influence of preparative and operational parameters (dipping conditions, calcination temperature, catalyst loading H₂O₂ dosage, pH, reaction temperature, additive salt ions and initial D-BL concentration) on degradation performance of CWPO process was investigated. The resulting MCAC catalyst showed higher reusability in direct violet oxidation than the magnetic activated carbon (MAC). Besides, dynamic tests also showed the maximal degradation rate reached 90.16% and its general decoloring ability of MCAC was 34 mg g^-1 for aqueous D-BL.

Optimization of sulfate removal from wastewater using magnetic multi-walled carbon nanotubes by response surface methodology

This paper reports a facile method for removal of sulfate from wastewater by magnetic multi-walled carbon nanotubes (MMWCNTs). Multi-walled carbon nanotubes and MMWCNTs were characterized by X-ray diffraction, Raman, transmission electron microscopy, Fourier transform infrared spectroscopy, and vibrating sample magnetometry. The results of the analysis indicated that MMWCNTs were synthesized successfully. The MMWCNTs can be easily manipulated in a magnetic field for the desired separation, leading to the removal of sulfate from wastewater. Response surface methodology (RSM) coupled with central composite design was applied to evaluate the effects of D/C (adsorbent dosage per initial concentration of pollutant (mg_adsorbent/(mg/l)_initial)) and pH on sulfate removal (%). Using RSM methodology, a quadratic polynomial equation was obtained, for removal of sulfate, by multiple regression analysis. The optimum combination for maximum sulfate removal of 93.28% was pH = 5.96 and D/C = 24.35. The experimental data were evaluated by the Langmuir and Freundlich adsorption models. The adsorption capacity of sulfate in the studied concentration range was 56.94 (mg/g). It was found out that the MMWCNTs could be considered as a promising adsorbent for the removal of sulfate from wastewater.

Carboxylic acid functionalized sesame straw: A sustainable cost-effective bioadsorbent with superior dye adsorption capacity

This study prepared a carboxylic functionalized bioadsorbent that met the "4-E" criteria: Efficient, Economical, Environmentally friendly, and Easily-produced. Sesame straw (Sesamum indicum L.) was functionalized through treatment with citric acid (SSCA) and tartaric acid (SSTA). The products were examined for adsorption capacity and mechanisms. Langmuir model gave the best fit for the isotherm data, and the maximum monolayer adsorption capacity of SSCA was 650mgg^-1 for methylene blue (MB). The excellent dye adsorption capacity of SSCA can be attributed to the introduction of ester groups during citric-acid modification and the tube-like structures (i.e., sesame straw cell wall remnants). At last, the cost of carboxylic acid functionalized bioadsorbents was evaluated, which showed that SSCA would be the most cost-effective bioadsorbent. Additionally, this study presents a thermo-decomposition methodology for contaminant-loaded bioadsorbent. Results showed that SSCA is probably one of the few bioadsorbents that can be produced and applied in industrial scale.

An overview of nanomaterials applied for removing dyes from wastewater

Organic dyes are one of the most commonly discharged pollutants in wastewaters; however, many conventional treatment methods cannot treat them effectively. Over the past few decades, we have witnessed rapid development of nanotechnologies, which offered new opportunities for developing innovative methods to treat dye-contaminated wastewater with low price and high efficiency. The large surface area, modified surface properties, unique electron conduction properties, etc. offer nanomaterials with excellent performances in dye-contaminated wastewater treatment. For examples, the agar-modified monometallic/bimetallic nanoparticles have the maximum methylene blue adsorption capacity of 875.0 mg/g, which are several times higher than conventional adsorbents. Among various nanomaterials, the carbonaceous nanomaterials, nano-sized TiO₂, and graphitic carbon nitride (g-C₃N₄) are considered as the most promising nanomaterials for removing dyes from water phase. However, some challenges, such as high cost and poor separation performance, still limit their engineering application. This article reviewed the recent advances in the nanomaterials used for dye removal via adsorption, photocatalytic degradation, and biological treatment. The modification methods for improving the effectiveness of nanomaterials are highlighted. Finally, the current knowledge gaps of developing nanomaterials on the environmental application were discussed, and the possible further research direction is proposed.

Tannin-immobilized cellulose hydrogel fabricated by a homogeneous reaction as a potential adsorbent for removing cationic organic dye from aqueous solution

Tannin-immobilized cellulose (CT) hydrogels were successfully fabricated by homogeneous immobilization and crosslinking reaction via a simple method. The structures and properties of hydrogels were characterized by SEM and mechanical test. Methlyene Blue (MB) was selected as a cationic dye model, and the adsorption ability of CT hydrogel was evaluated. Tannins immobilized acted as adsorbent sites which combined MB by electrostatic attraction, resulting in the attractive adsorption ability of CT hydrogel. Adsorption kinetics could be better described by the pseudo-second-order model, and the absorption behaviors were in agreement with a Langmuir isotherm. The adsorption-desorption cycle of CT hydrogel was repeated six times without significant loss of adsorption capacity. In this work, both tannin immobilization and hydrogel formation were achieved simultaneously by a facile homogeneous reaction, providing a new pathway to fabricate tannin-immobilized materials for water treatment.

Cadmium and lead remediation using magnetic and non-magnetic sustainable biosorbents derived from Bauhinia purpurea pods

Bauhinia purpurea (Kaniar) pods were dried, powdered, and utilized for cadmium and lead removal.

Recent advances in nanomaterials for water protection and monitoring

Nanomaterials (NMs) for adsorption, catalysis, separation, and disinfection are scrutinized. NMs-based sensor technologies and environmental transformations of NMs are highlighted.

Adsorption behavior of methylene blue onto waste-derived adsorbent and exhaust gases recycling

A waste-derived adsorbent was prepared from waste carbon that was obtained from the monosodium glutamate production, by microwave heating under ultrasonic spray conditions for removing methylene blue (MB) from wastewater.

Porous BiOBr/Bi2MoO6 Heterostructures for Highly Selective Adsorption of Methylene Blue

Porous BiOBr/Bi2MoO6 (Br/Mo) heterostructures were designed and successfully fabricated, in which BiOBr nanoparticles were deposited on the surface of the secondary nanoplate of three-dimensional porous Bi2MoO6 architectures through a deposition-precipitation process. The as-prepared Br/Mo heterostructures were used as an adsorbent to remove methylene blue (MB) from aqueous solution. The batch adsorption results indicated that 50.0 wt % Br/Mo heterostructures show an enhanced adsorption capacity compared with pure Bi2MoO6 and BiOBr. The effects of initial solution, initial concentration, and contact time were systematically investigated. The optimum adsorbent amount and the pH value were determined to be 0.8 g L-1 and 2, respectively. Meanwhile, the experiments also revealed that porous Br/Mo heterostructures possess higher preferential adsorptivity for MB than that for methyl orange (MO-) and rhodamine B (RhB+). The dynamic experimental result indicated that the adsorption process conforms to the pseudo-second-order kinetic model. Weber's intraparticle diffusion model indicated that two steps took place during the adsorption process. Thermodynamic analysis results showed that the adsorption is a physisorption process, which conforms to the Langmuir isotherm model. Additionally, the possible adsorption mechanism was also investigated. The present study implied that Br/Mo heterostructures are promising candidates as adsorbents for MB removal. Therefore, fabrication of semiconductor-based heterostructures could be a strategy to design new efficient adsorbents for the removal of environmental pollutants.