Behaviour and fate of perfluoroalkyl and polyfluoroalkyl substances (PFASs) in drinking water treatment: a review

Environmental pitfalls and associated human health risks and ecological impacts from landfill leachate contaminants: Current evidence, recommended interventions and future directions

The improper management of solid waste, particularly the dumping of untreated municipal solid waste, poses a growing global challenge in both developed and developing nations. The generation of leachate is one of the significant issues that arise from this practice, and it can have harmful impacts on both the environment and public health. This paper presents an overview of the primary waste types that generate landfill leachate and their characteristics. This includes examining the distribution of waste types in landfills globally and how they have changed over time, which can provide valuable insights into potential pollutants in a given area and their trends. With a lack of specific regulations and growing concerns regarding environmental and health impacts, the paper also focuses on emerging contaminants. Furthermore, the environmental and ecological impacts of leachate, along with associated health risks, are analyzed. The potential applications of landfill leachate, suggested interventions and future directions are also discussed in the manuscript. Finally, this work addresses future research directions in landfill leachate studies, with attention, for the first time to the potentialities that artificial intelligence can offer for landfill leachate management, studies, and applications.

Enhanced electrochemical degradation of perfluorooctanoic acid by ligand-bridged PtII at Pt anodes

A new mechanism for the electro-oxidation (EO) degradation of perfluorooctanoic acid (PFOA) by Pt anode was reported. Using bridge-based ligand anions (SCN-, Cl- and N3-) as electrolytes, the degradation effect of PFOA by Pt-EO system was significant. Characterization of the Pt anode, the detection and addition of dissolved platinum ions, and the comparison of Pt with DSA anodes determined that the Pt- ligand complexes resulting from the specific binding of anodically dissolved PtII with ligand ions and C7F15COO- ((C7F15-COO)PtII-L3, L = SCN-, Cl- and N3-) on the electrode surface played a decisive role in the degradation of PFOA. Density functional theory (DFT) calculations showed that inside (C7F15-COO)PtII-L3 complexes, the electron density of the perfluorocarbon chain (including the F atom) compensated toward the carboxyl group and electrons in the PFOA ion transferred to the PtII-Cl3. Moreover, the (C7F15-COO)PtII-Cl3, as a whole, was calculated to migrate electrons toward the Pt anode, leading to the formation of PFOA radical (C7F15-COO•). Finally, with the detection of a series of short chain homologues, the CF2-unzipping degradation pathway of PFOA was proposed. The newly developed Pt-EO system is not affected by water quality conditions and can directly degrade alcohol eluent of PFOA, which has great potential for treating industrial wastewater contaminated with PFOA.

Per- and poly-fluoroalkyl substances removal in multi-barrier advanced water purification system for indirect potable reuse

The study evaluated the removal efficacy of per- and poly-fluoroalkyl substances (PFAS) across various advanced water treatment (AWT) processes in a field-scale AWT train using secondary effluent samples from a full-scale water reclamation facility (WRF). Samples collected from April to October 2020 revealed PFCAs as the dominant PFAS compounds in the WRF secondary effluent, with PFPeA having the highest average concentration and PFSAs in notably lower amounts. Temporal fluctuations in total PFAS concentrations peaked in September 2020, which may reflect the seasonality in PFAS discharges related to applications like AFFFs and pesticides. In assessing AWT processes, coagulation-flocculation-clarification-filtration system showed no notable PFAS reduction, while ozonation resulted in elevated PFBS and PFBA concentrations. Biological activated carbon (BAC) filtration effectively removed long-chain PFAS like PFOS and PFHxS but saw increased concentrations of short-chain PFAS post-treatment. Granular activated carbon (GAC) filtration was the most effective treatment, reducing all PFSAs below the detection limits and significantly decreasing most PFCAs, though short-chain PFCAs persisted. UV treatment did not remove short-chain PFCAs such as PFBA, PFPeA, and PFHxA. The findings highlight the efficacy of AWT processes like GAC in PFAS reduction for potable reuse, but also underscore the challenge presented by short-chain PFAS, emphasizing the need for tailored treatment strategies. PRACTITIONER POINTS: Secondary effluents showed higher concentrations of PFCAs compared to PFSAs. Advanced water treatment effectively removes long-chain PFAS but not short-chain. Ozonation may contribute to formation of short-chain PFAS. BAC is less effective on short-chain PFAS, requiring further GAC treatment.

Pollution characteristics and health risk of sixty-five organics in one drinking water system: PAEs should be prioritized for control

Currently, a large number of emerging organic contaminants have been detected in domestic and international drinking water systems. However, there are differences among the research methods, which lead to system errors in directly comparing the hazards of different contaminants, so it is difficult to analyze the priority control pollutants and the risk control target in drinking water from previous studies. Therefore, we selected a drinking water treatment plant (DWTP) in the east of China, and detected trihalomethanes (THMs), antibiotics, phthalate esters (PAEs), organophosphate esters (OPEs), per and polyfluoroalkyl substances (PFASs), a total of sixty-five organic contaminants in one batch water sample of four seasons, and carried out the whole process monitoring of "Source water-DWTP-Network-Users", and calculated the health risks of contaminants in tap water. The results showed that DWTP could effectively remove antibiotics and PAEs; the removal rate of coagulation for antibiotics can be up to 47%; the release of PAEs in the plastic water supply pipe leads to a significant increase of the concentrations in the water transportation system, which can reach 2.92 times of that in finished water; compared with other contaminants, THMs and PAEs in tap water have higher health risks. This study reveals that THMs and PAEs are priority control organic pollutants, and the water supply network is the key risk control target in the drinking water system, providing a theoretical basis for how to ensure the safety of drinking water.

Industrial sources of per- and polyfluoroalkyl substances (PFAS) to a sewershed in Ontario, Canada

Per- and polyfluoroalkyl substances (PFAS) are ubiquitous in the environment despite global regulatory action to restrict their use in industrial processes and products. The objective of this reconnaissance sampling was to understand current industrial use and ongoing sources of PFAS in Ontario. Fourteen PFAS were analyzed in effluents from four sectors: electroplaters, laundry and carpet cleaners, landfills, and circuit board manufacturers that discharge to sewersheds connected to wastewater treatment plants. Maximum concentrations were detected in carpet cleaning wastewater: 79,000 ng/L for perfluorohexane sulfonate (PFHxS), 26,000 ng/L perfluorooctane sulfate (PFOS), and 9400 ng/L perfluorooctanoic acid (PFOA). Total summed PFAS (∑PFAS14) concentrations were highest in laundry and carpet cleaners > electroplaters > landfill leachate > circuit boarders. These results indicate that PFAS continue to be used in select manufacturing and processing facilities and that the elevated levels are associated with past and current uses in commercial products.

Evaluation of commercial nanofiltration and reverse osmosis membrane filtration to remove per-and polyfluoroalkyl substances (PFAS): Effects of transmembrane pressures and water matrices

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) are now widely found in aquatic ecosystems, including sources of drinking water and portable water, due to their increasing prevalence. Among different PFAS treatment or separation technologies, nanofiltration (NF) and reverse osmosis (RO) both yield high rejection efficiencies (>95%) of diverse PFAS in water; however, both technologies are affected by many intrinsic and extrinsic factors. This study evaluated the rejection of PFAS of different carbon chain length (e.g., PFOA and PFBA) by two commercial RO and NF membranes under different operational conditions (e.g., applied pressure and initial PFAS concentration) and feed solution matrixes, such as pH (4-10), salinity (0- to 1000-mM NaCl), and organic matters (0-10 mM). We further performed principal component analysis (PCA) to demonstrate the interrelationships of molecular weight (213-499 g·mol-1 ), membrane characteristics (RO or NF), feed water matrices, and operational conditions on PFAS rejection. Our results confirmed that size exclusion is a primary mechanism of PFAS rejection by RO and NF, as well as the fact that electrostatic interactions are important when PFAS molecules have sizes less than the NF membrane pores. PRACTITIONER POINTS: Two commercial RO and NF membranes were both evaluated to remove 10 different PFAS. High transmembrane pressures facilitated permeate recovery and PFAS rejection by RO. Electrostatic repulsion and pore size exclusion are dominant rejection mechanisms for PFAS removal. pH, ionic strength, and organic matters affected PFAS rejection. Mechanisms of PFAS rejection with RO/NF membranes were explained by PCA analysis.

Perfluorooctanoic acid suppresses sperm functions via abnormal Protein Kinase B activation during capacitation

Perfluorooctanoic acid (PFOA) is a perfluorinated compound, a synthesized chemical, and has been used in several industrial products for more than 70 years. Although PFOA is known to exert toxic effects in normal cells, there is no detailed information on its reproductive toxicity and its effects on sperm functions related to protein kinase B (AKT). Therefore, this study was conducted to explore the effects of PFOA on sperm functions via AKT. Boar spermatozoa were incubated with different concentrations of PFOA (0, 0.1, 1, 10, and 100 μM) to induce capacitation. Sperm functions (sperm motility, motion kinematic parameters, capacitation status, cell viability, and intracellular ATP levels) were evaluated. In addition, the expression levels of AKT, phospho-AKT, phospho-PKA, and tyrosine phosphorylated proteins were evaluated by western blotting. Results showed significant decreases in sperm motility and motion kinematic parameters. PFOA treatment significant suppressed spermatozoa capacitation and intracellular ATP levels. Furthermore, it significantly decreased the levels of phospho-PKA and tyrosine phosphorylated proteins. The levels of AKT phosphorylation at Thr308 and Ser473 also significantly decreased. These findings suggest that PFOA diminishes sperm functions during capacitation and induces unnatural phosphorylation in AKT, leading to reproductive toxicity. Therefore, people should be aware of reproductive toxicity when using PFOA.

Perfluorooctanoic acid exposure leads to defect in follicular development through disrupting the mitochondrial electron transport chain in granulosa cells

Perfluorooctanoic acid (PFOA) is a persistent environmental pollutant that can impair ovarian function, while the underlying mechanism is not fully understood, and effective treatments are lacking. In this study, we established a mouse model of PFOA exposure induced by drinking water and found that PFOA exposure impaired follicle development, increased apoptosis of granulosa cells (GCs), and hindered normal follicular development in a 3D culture system. RNA-seq analysis revealed that PFOA disrupted oxidative phosphorylation in ovaries by impairing the mitochondrial electron transport chain. This resulted in reduced mitochondrial membrane potential and increased mitochondrial reactive oxygen species (mtROS) in isolated GCs or KGN cells. Resveratrol, a mitochondrial nutrient supplement, could improve mitochondrial function and restore normal follicular development by activating FoxO1 through SIRT1/PI3K-AKT pathway. Our results indicate that PFOA exposure impairs mitochondrial function in GCs and affects follicle development. Resveratrol can be a potential therapeutic agent for PFOA-induced ovarian dysfunction.

Molecular Cu Electrocatalyst Escalates Ambient Perfluorooctanoic Acid Degradation

Groundwater reservoirs contaminated with perfluoroalkyl and polyfluoroalkyl substances (PFASs) need purifying remedies. Perfluorooctanoic acid (PFOA) is the most abundant PFAS in drinking water. Although different degradation strategies for PFOA have been explored, none of them disintegrates the PFOA backbone rapidly under mild conditions. Herein, we report a molecular copper electrocatalyst that assists in the degradation of PFOA up to 93% with a 99% defluorination rate within 4 h of cathodic controlled-current electrolysis. The current-normalized pseudo-first-order rate constant has been estimated to be quite high for PFOA decomposition (3.32 L h-1 A-1), indicating its fast degradation at room temperature. Furthermore, comparatively, rapid decarboxylation over the first 2 h of electrolysis has been suggested to be the rate-determining step in PFOA degradation. The related Gibbs free energy of activation has been calculated as 22.6 kcal/mol based on the experimental data. In addition, we did not observe the formation of short-alkyl-chain PFASs as byproducts that are typically found in chain-shortening PFAS degradation routes. Instead, free fluoride (F-), trifluoroacetate (CF3COO-), trifluoromethane (CF3H), and tetrafluoromethane (CF4) were detected as fragmented PFOA products along with the evolution of CO2 using gas chromatography (GC), ion chromatography (IC), and gas chromatography-mass spectrometry (GC-MS) techniques, suggesting comprehensive cleavage of C-C bonds in PFOA. Hence, this study presents an effective method for the rapid degradation of PFOA into small ions/molecules.

Physicochemical properties and interactions of perfluoroalkyl substances (PFAS) - Challenges and opportunities in sensing and remediation

Per- and polyfluoroalkyl substances (PFAS) is a class of persistent organic pollutants that presents health and environmental risks. PFAS are ubiquitously present in the environment, but current remediation technologies are ineffective in degrading them into innocuous chemicals, especially high energy degradation processes often generate toxic short chain intermediates. Therefore, the best remediation strategy is to first detect the source of pollution, followed by capturing and mineralising or recycling of the compounds. The main objective of this article is to summarise the unique physicochemical properties and to critically review the intermolecular and intramolecular physicochemical interactions of PFAS, and how these interactions can become obstacles; and at the same time, how they can be applied to the PFAS sensing, capturing, and recycling process. The physicochemical interactions of PFAS chemicals are being reviewed in this paper includes, (1) fluorophilic interactions, (2) hydrophobic interactions, (3) electrostatic interactions and cation bridging, (4) ionic exchange and (5) hydrogen bond. Moreover, all the different influential factors to these interactions have also been reported. Finally, properties of these interactions are compared against one another, and the recommendations for future designs of affinity materials for PFAS have been given.

Assessing the persistence, mobility and toxicity of emerging organic contaminants in Croatian karst springs used for drinking water supply

Emerging organic contaminants (EOCs) are a vast group of often (very)persistent, (very)mobile and toxic (PMT/vPvM) substances that are continuously released worldwide, posing environmental and human health risks. Research on occurrence and behavior of EOCs in karst is in its infancy, thus policy measures and legislative control of these compounds in groundwater are still lacking. The Dinaric karst aquifers are an essential source of drinking water for almost half of Croatia's territory. Intense karstification, complex heterogeneous characteristics, and high fracture-cavernous porosity result in rapid, far-reaching groundwater flow and large karst springs, but also high intrinsic vulnerability due to low contaminant attenuation. To prioritize future monitoring and establish appropriate thresholds for EOCs detected in Croatian karst drinking water resources, in silico tools based on quantitative structure-activity relationships were used in PBT (persistence, bioaccumulation, and toxicity) and PMT/vPvM analyzes, while toxicological assessment helped identify potential threats to human health. In 33 samples collected during two sampling campaigns in 2019 at 16 karst springs and one lake used for water supply, we detected 65 compounds (EOCs and some legacy chemicals), of which 7 were classified as potentially PBT or vPvB compounds (PFOS, PFHxS, PFHpA, PFOA, PFNA, boscalid, and azoxystrobin), while only 2 compounds were assessed as not PMT/vPvM. This finding underlines that most of detected EOCs potentially endanger karst (ground)water ecosystems and important drinking water sources in Croatia. Comparison of maximum concentrations with existing or derived drinking water guideline values revealed how 2 of 65 detected compounds represent a potential risk to human health at lifelong exposure (sulfadiazine and hydrochlorothiazide), while 5 chemicals warrant additional human health impacts studies and groundwater monitoring. Although most compounds do not individually pose a significant risk to human health at current environmental levels, their potential synergistic and long-term effects remain unknown.

Exploration of functionalizing graphene and the subsequent impact on PFAS adsorption capabilities via molecular dynamics

Per- and polyfluoroalkyl substances (PFAS) are extremely stable compounds due to their strong C-F bonds. They are used in water and stain proof coatings, aqueous film forming foams for fire suppression, cosmetics, paints, adhesives, etc. PFAS have been found in soils and waterways around the world due to their widespread usage and recalcitrance to degradation. Development of selective adsorbent materials is necessary to effectively capture a vast family of PFAS structures in order to remediate PFAS contamination in the environment. The work herein is focused on extracting design principles from molecular dynamics simulations of PFAS with functionalized graphene materials. Simulations examined how PFBA, PFOA, and PFOS interact with graphene, graphene oxide, nitrogen group-functionalized graphene oxide, partially fluorinated graphene flakes, and fully fluorinated flakes. Five flakes were used in each simulation to examine how interactions between flakes may lead to competitive interactions with respect to PFAS or formation of pores. Our study revealed that both the clustering mechanisms of the flakes and functional groups on the flake play a role in PFAS adsorption. The most effective functionalizations for PFAS adsorption are as follows: pristine graphene ≈ fully fluorinated > graphene oxide ≈ partially fluorinated > amine and amide functionalized graphene oxide flake. Long chain PFAS and sulfonate PFAS had higher propensity to adsorb to the materials compared to short chain PFAS and carboxylic head groups.

Toxicity of environmentally relevant concentration of PFAS chemicals in Lumbriculus variegatus (Oligochaeta, Lumbriculidae) - A multi-bioindicator study

PFAS, or per- and polyfluoroalkyl substances, are a family of man-made chemicals found in a variety of products from non-stick cookware and food wrappers to firefighting foams. PFAS are persistent and widely distributed in the environment, including aquatic environments. In this study we examined the impact of PFAS chemicals on the physiological and behavioral endpoints of Lumbriculus variegatus (i.e., blackworms). Lumbriculus variegatus is a species of freshwater annelid worm that plays key roles in shallow freshwater ecosystems. At an environmentally relevant concentration of 1 μg/L, 12-day aqueous exposure to long chain PFAS, including PFOA, PFOS and PFDA, each markedly slowed the pulse rate of the dorsal blood vessel in L. variegatus, indicating a suppressive effect on blood circulation. The mean pulse rate was reduced from 9.6 beats/minute to 6.2 and 7.0 beats/min in PFOA and PFOS, respectively (P < 0.0001). Further, PFOA, PFOS and PFDA reduced the escape responsiveness of L. variegatus to physical stimulation. The percentage of worms showing normal escape behavior was reduced from 99.0% in control to 90.6% in the PFOS exposed group (P < 0.01). In a chronic (4 week) growth study, exposure to overlying water and sediment spiked with PFOA, PFOS or PFDA reduced the total biomass and the number of worms, indicating a suppressive effect on worm population growth. For instance, PFOA and PFDA reduced the total dry biomass by 26.3% and 28.5%, respectively, compared to the control (P < 0.05). The impact of PFAS on blackworm physiology is accompanied by an increase in lipid peroxidation. The level of malondialdehyde (MDA), an indicator of lipid peroxidation, and catalase, a major antioxidant enzyme, were markedly increased in PFOA, PFOS and PFDA exposed groups. Interestingly, exposure to PFHxA, a short chain PFAS, had no detectable effect on any of the measured endpoints. Our results demonstrate that L. variegatus is highly sensitive to the toxic impact of long chain PFAS chemicals as measured by multiple endpoints including blood circulation, behavior, and population growth. Such toxicity may have a detrimental impact on L. variegatus and the freshwater ecosystems where it resides.

Screening for 26 per- and polyfluoroalkyl substances (PFAS) in German drinking waters with support of residents

The occurrence of per- and polyfluoroalkyl substances (PFAS) in water cycles poses a challenge to drinking water quality and safety. In order to counteract the large knowledge gap regarding PFAS in German drinking water, 89 drinking water samples from all over Germany were collected with the help of residents and were analyzed for 26 PFAS by high-performance liquid chromatography with tandem mass spectrometry (HPLC-MS/MS). The 20 PFAS recently regulated by sum concentration (PFAS∑20), as well as six other PFAS, were quantified by targeted analysis. In all drinking water samples, PFAS∑20 was below the limit of 0.1 μg/L, but the sum concentrations ranged widely from below the limit of quantification up to 80.2 ng/L. The sum concentrations (PFAS∑4) of perfluorohexanesulfonate (PFHxS), perfluorooctanesulfonate (PFOS), perfluorooctanoate (PFOA), and perfluorononanoate of 20 ng/L were exceeded in two samples. The most frequently detected individual substances were PFOS (in 52% of the samples), perfluorobutanesulfonate (52%), perfluorohexanoate (PFHxA) (44%), perfluoropentanoate (43%) and PFHxS (35%). The highest single concentrations were 23.5 ng/L for PFHxS, 15.3 ng/L for PFOS, and 10.1 ng/L for PFHxA. No regionally elevated concentrations were identified, but some highly urbanized areas showed elevated levels. Concentrations of substitution PFAS, including 2,3,3,3-tetrafluoro-2-(heptafluoropropoxy)propanoate and 2,2,3-trifluor-3-[1,1,2,2,3,3-hexafluor-3-(trifluormethoxy)propoxy]-propanoate (anion of ADONA), were very low compared to regulated PFAS. The most frequently detected PFAS were examined for co-occurrences, but no definite correlations could be found.

Comparison of the photocatalytic degradability of PFOA, PFOS and GenX using Fe-zeolite in water

Knowledge on the photocatalytic degradability of the emerging poly- and perfluorinated alkyl substances (PFAS) in water, specifically GenX, is limited. GenX has been detected globally in river water and is considered potentially more toxic than legacy PFAS. In this study, we compared the photocatalytic degradability of GenX with the legacy compounds perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) using Fe-zeolite photocatalysts. After 7 h of irradiation, GenX showed lower removal (79%) and defluorination (33%) as compared to PFOA (100% removal and 69% defluorination) and PFOS (100% removal and 51% defluorination). The quasi-first-order degradation rate of GenX (1.5 h1) was 12 and 1.2 times lower than PFOA (18.4 h-1) and PFOS (1.8 h-1), respectively. Additionally, PFOA's defluorination rate (0.9 h-1) was approximately 2.6 and 9 times higher than GenX (0.35 h-1) and PFOS (0.1 h-1), respectively. These outcomes correlate with GenX's lower hydrophobicity, leading to reduced adsorption (40%) compared to PFOA (99%) and PFOS (87%). Based on identified transformation products, we proposed a GenX degradation pathway, resulting in ultra-short-chain PFASs with a chain length of 2 and 3 carbon atoms, while PFOA and PFOS degraded stepwise, losing 1 carbon-fluorine bond at a time, leading to gradually shorter chain lengths (from 7 to 2 carbon atoms). In conclusion, GenX is more challenging to remove and degrade due to its lower adsorption on the photocatalyst, potential steric hindrance, and higher production of persistent ultra-short-chain transformation products through photocatalysis.

A review of innovative approaches for onsite management of PFAS-impacted investigation derived waste

The historic use of aqueous film-forming foam (AFFF) has led to widespread detection of per- and polyfluoroalkyl substance (PFAS) in groundwater, soils, sediments, drinking water, wastewater, and receiving aquatic systems throughout the United States (U.S.). Prior to any remediation activities, in order to identify the PFAS-impacted source zones and select the optimum management approach, extensive site investigations need to be conducted. These site investigations have resulted in the generation of considerable amount of investigation-derived waste (IDW) which predominantly consists of well purging water and drill fluid, equipment washing residue, soil, drill cuttings, and residues from the destruction of asphalt and concrete surfaces. IDW is often impacted by varying levels of PFAS which poses a substantial challenge concerning disposal to prevent potential mobilization of PFAS, logistical complexities, and increasing requirement for storage as a result of accumulation of the associated wastes. The distinct features of IDW involve the intermittent generation of waste, substantial volume of waste produced, and the critical demand for onsite management. This article critically focuses on innovative technologies and approaches employed for onsite treatment and management of PFAS-impacted IDW. The overall objective of this study centers on developing and deploying end-of-life treatment technology systems capable of facilitating unrestricted disposal, discharge, and/or IDW reuse on-site, thereby reducing spatial footprints and mobilization time.

Investigation of Sources of Fluorinated Compounds in Private Water Supplies in an Oil and Gas-Producing Region of Northern West Virginia

Per- and polyfluoroalkyl substances (PFASs) are a class of toxic organic compounds that have been widely used in consumer applications and industrial activities, including oil and gas production. We measured PFAS concentrations in 45 private wells and 8 surface water sources in the oil and gas-producing Doddridge, Marshall, Ritchie, Tyler, and Wetzel Counties of northern West Virginia and investigated relationships between potential PFAS sources and drinking water receptors. All surface water samples and 60% of the water wells sampled contained quantifiable levels of at least one targeted PFAS compound, and four wells (8%) had concentrations above the proposed maximum contaminant level (MCL) for perfluorooctanoic acid (PFOA). Individual concentrations of PFOA and perfluorobutanesulfonic acid exceeded those measured in finished public water supplies. Total targeted PFAS concentrations ranged from nondetect to 36.8 ng/L, with surface water concentrations averaging 4-fold greater than groundwater. Semiquantitative, nontargeted analysis showed concentrations of emergent PFAS that were potentially higher than targeted PFAS. Results from a multivariate latent variable hierarchical Bayesian model were combined with insights from analyses of groundwater chemistry, topographic characteristics, and proximity to potential PFAS point sources to elucidate predictors of PFAS concentrations in private wells. Model results reveal (i) an increased vulnerability to contamination in upland recharge zones, (ii) geochemical controls on PFAS transport likely driven by adsorption, and (iii) possible influence from nearby point sources.

Adsorption of PFAS by All-Silica Zeolite β: Insights into the Effect of the Water Matrix, Regeneration of the Material, and Continuous PFAS Adsorption

Per- and polyfluoroalkyl substances (PFAS) are man-made organic compounds ubiquitously present in the environment. Due to their persistency and bioaccumulative nature, and because of increasingly stringent regulations of PFAS, their removal from the environment is necessary. Our initial study identified all-silica zeolite β as an alternative adsorbent with a high selectivity, affinity, and capacity for perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) removal. Here, we study the influence of the PFAS chain length on the affinity and capacity of a novel material, all-silica zeolite β, showing that the *BEA zeolite is an ideal sorbent for the removal of PFAS with 8 carbons. The solution pH and the addition of cations or natural organic substances to the water matrix have minimal influence on PFOA/PFOS removal with the zeolite. Next, regeneration of a PFOS-loaded zeolite was assessed; besides thermal, solvent-driven regeneration of the zeolite is also possible, using well-selected combinations of non-noxious solvents. Lastly, continuous adsorption experiments show that zeolite can be used for larger-scale applications.

Important properties of anion exchange resins for efficient removal of PFOS and PFOA from groundwater

Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) present in various water sources have raised a serious concern on their health risk worldwide. Anion exchange is known to be one of the effective treatment methods but the resin properties suitable for theses contaminants have not been fully understood. We examined four commercially available anion exchange resins with different properties (DIAION™ PA312, HPA25M, UBA120, and WA30) and one polymer-based adsorbent (HP20), for their PFOA and PFOS removal in the batch experiment. All or a part of the selected resins were further characterized for their functional group, surface morphology and pore size distribution. The 72 h batch experiment with the 100 mg/L PFOA or PFOS in the laboratory pure water matrix showed a superior capacity of the strong base anion exchange resins, the porous-type HPA25M and PA312, and the gel-type UBA120, for PFOA removal (92.6-97.9%). Among those resins, the high porous HPA25M was suggested most effective due to its remarkably high reaction rate and effectiveness to PFOS (99.9%). In the groundwater matrix, however, the performance of the those anion exchange resins was generally suppressed, causing up to 71% decrease in their removal rates. The least matrix impact was observed for PFOS removal by HPA25M, which indicated the resin's high selectivity to the contaminant. The physiochemical analysis indicated that the presence of relatively large pores (1 nm-10 nm) over HPA25M played an important role in the PFAS removal.

Uncovering per- and polyfluoroalkyl substances (PFAS) with nontargeted ion mobility spectrometry-mass spectrometry analyses

Because of environmental and health concerns, legacy per- and polyfluoroalkyl substances (PFAS) have been voluntarily phased out, and thousands of emerging PFAS introduced as replacements. Traditional analytical methods target a limited number of mainly legacy PFAS; therefore, many species are not routinely assessed in the environment. Nontargeted approaches using high-resolution mass spectrometry methods have therefore been used to detect and characterize unknown PFAS. However, their ability to elucidate chemical structures relies on generation of informative fragments, and many low concentration species are not fragmented in typical data-dependent acquisition approaches. Here, a data-independent method leveraging ion mobility spectrometry (IMS) and size-dependent fragmentation was developed and applied to characterize aquatic passive samplers deployed near a North Carolina fluorochemical manufacturer. From the study, 11 PFAS structures for various per- and polyfluorinated ether sulfonic acids and multiheaded perfluorinated ether acids were elucidated in addition to 36 known PFAS. Eight of these species were previously unreported in environmental media, and three suspected species were validated.

Chemical Tailoring of β-Cyclodextrin-Graphene Oxide for Enhanced Per- and Polyfluoroalkyl Substances (PFAS) Adsorption from Drinking Water

We report on the synthesis of β-cyclodextrin (βCD) modified graphene oxide (GO) nanosheets, having different sized alkyl linkers (GO-Cn -βCD) and their exploitation as sorbent of per- and polyfluoroalkyl substances (PFAS) from drinking water. βCD were functionalized with a pending amino group, and the resulting precursors grafted to GO nanosheets by epoxide ring opening reaction. Loading of βCD units in the range 12 %-36 % was estimated by combined XPS and elemental analysis. Adsorption tests on perfluorobutanoic acid (PFBA), a particularly persistent PFAS selected as case study, revealed a strong influence of the alkyl linker length on the adsorption efficiency, with the hexyl linker derivative GO-C6 -βCD outperforming both pristine GO and granular activated carbon (GAC), the standard sorbent benchmark. Molecular dynamic simulations ascribed this evidence to the favorable orientation of the βCD unit on the surface of GO which enables a strong contaminant molecules retention.

Estimation of the Half-Lives of Recently Detected Per- and Polyfluorinated Alkyl Ethers in an Exposed Community

To estimate half-lives for novel fluoroethers, the GenX Exposure Study obtained two serum measurements for per- and polyfluoroalkyl substances (PFAS) for 44 participants of age 12-86 years from North Carolina, collected 5 and 11 months after fluoroether discharges into the drinking water source were controlled. The estimated half-lives for these compounds were 127 days (95% confidence interval (95% CI) = 86, 243 days) for perfluorotetraoxadecanoic acid (PFO4DA), 296 days for Nafion byproduct 2 (95% CI = 176, 924 days), and 379 days (95% CI = 199, 3870 days) for perfluoro-3,5,7,9,11-pentaoxadodecanoic acid (PFO5DoA). Using these estimates and the literature values, a model was built that predicted PFAS half-lives using structural properties. Three chemical properties predicted 55% of the variance of PFAS half-lives based on 15 PFAS. A model with only molecular weight predicted 69% of the variance. Some properties can predict the half-lives of PFAS, but a deeper understanding is needed. These fluoroethers had biological half-lives longer than published half-lives for PFHxA and PFHpA (30-60 days) but shorter than those for PFOA and PFOS (800-1200 days). These are the first and possibly only estimates of human elimination half-lives of these fluoroethers.

In situ self-sacrificial synthesis of polypyrrole/biochar composites for efficiently removing short- and long-chain perfluoroalkyl acid from contaminated water

Efficient removal of perfluoroalkyl acids (PFAAs), especially short-chain ones, from contaminated water is of great challenge and is urgently called for so as to safeguard the ecosystem and human health. Herein, polypyrrole (PPy) functionalized biochar (BC) composites were innovatively synthesized by an in situ self-sacrificial approach to allow efficient capture of PFAAs with different chain lengths. Compared with conventional PPy-based composites synthesized by direct polymerization using FeCl3 as an oxidizing agent, PPy/BC composites were fabricated utilizing freshly generated Fe3+ as an oxidizing agent from self-sacrificial Fe3O4 for pyrrole monomers in situ polymerizing on BC. As a result, with the support of BC and gradual release of Fe3+, PPy overcame its tendency to aggregate and became uniformly dispersed on BC, and meanwhile, PPy could well tailor the surface chemistry of BC to endow its positively charged surface. Consequently, the composites exhibited strong sorption capacities of 3.89 and 1.53 mmol/g for short-chain perfluorobutanoic acid (PFBA) and perfluorobutane sulfonic acid (PFBS), 2.55 and 1.22 mmol/g for long-chain perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS), respectively, which were superior to those of pristine BC, commercial activated carbon, and anion exchange resins reported. Additionally, they could effectively remove 17 different classes of per- and polyfluoroalkyl substances (PFAS) (removal >95%) from actual PFAS-contaminated water, and the spent sorbent could be well regenerated and reused at least 5 times. An integrated analysis indicated that such an outstanding PFAA sorption performance on PPy/BC composites could be mainly attributed to surface adsorption enhanced by electrostatic attractions (anion exchange interaction) with the traditional hydrophobic interaction and pore filling of less contribution, particularly for short-chain analogues. These results are expected to inform the design of BC with greater ability to remove PFAS from water and the new sorbent could help water facilities comply with PFAS regulations.

Long-term removal of perfluoroalkyl substances via activated carbon process for general advanced treatment purposes

Granular or powdered activated carbon (GAC/PAC) processes are installed in full-scale drinking water treatment plants (DWTPs) to reduce disinfection byproduct precursors, odor, ammonia, and pesticides. This study investigated the ability of GAC/PAC processes in 23 DWTPs to remove per- and polyfluoroalkyl substances (PFASs). In the GAC process, filter breakthrough of perfluoroalkyl carboxylic acids (PFCAs) occurred faster as the PFCA chain length is decreased. During periods of high water temperatures (20-29 °C), the effluent concentration of two short-chain PFCAs (C4 and C5) surpassed that of the influent after the throughput reached 5,000-7,500 bed volumes (equivalent to 2-3 months) due to desorption. However, such desorption was not observed during periods of low water temperatures (5-19 °C). Meanwhile, long-chain PFCAs were consistently removed, as the GAC was replaced before breakthrough became noticeable. PFAS removal deteriorated at a remarkably fast rate after a partial breakthrough of several tens of percent. Biological activated carbon was proved ineffective in removing PFASs due to its diminished adsorption capacity after long-term use. The PAC process, however, exhibited a slight decrease in PFCA residual (10%) at higher water temperatures (15-30 °C). The PAC dose required for a certain residual ratio was lower with an increase in the hydrophobicity of PFAS; C8-PFCA only required 20 mg/L of PAC for 50% removal, while C4-PFCA required a significantly higher dose of 100-700 mg/L. Consequently, the activated carbon process, which removes organic contaminants in surface water, was inadequate in removing PFASs, particularly those with short chains. Thus, it is recommended that GAC filters be replaced more frequently (within two months) for short-chain PFAS removal. Further, the adsorption performance of PAC must be enhanced.

Molecular detection of per- and polyfluoroalkyl substances in water using time-of-flight secondary ion mass spectrometry

Detection of per- and polyfluoroalkyl substances (PFASs) is crucial in environmental mitigation and remediation of these persistent pollutants. We demonstrate that time-of-flight secondary ion mass spectrometry (ToF-SIMS) is a viable technique to analyze and identify these substances at parts per trillion (ppt) level in real field samples without complicated sample preparation due to its superior surface sensitivity. Several representative PFAS compounds, such as perfluorooctanesulfonic acid (PFOS), perfluorobutanoic acid (PFBA), perfluoropentanoic acid (PFPeA), perfluoheptanoic acid (PFHpA), and perfluorononanoic acid (PFNA), and real-world groundwater samples collected from monitoring wells installed around at a municipal wastewater treatment plant located in Southern California were analyzed in this work. ToF-SIMS spectral comparison depicts sensitive identification of pseudo-molecular ions, characteristic of reference PFASs. Additionally, principal component analysis (PCA) shows clear discrimination among real samples and reference compounds. Our results show that characteristic molecular ion and fragments peaks can be used to identify PFASs. Furthermore, SIMS two-dimensional (2D) images directly exhibit the distribution of perfluorocarboxylic acid (PFCA) and PFOS in simulated mixtures and real wastewater samples. Such findings indicate that ToF-SIMS is useable to determine PFAS compounds in complex environmental water samples. In conclusion, ToF-SIMS provides simple sample preparation and high sensitivity in mass spectral imaging, offering an alternative solution for environmental forensic analysis of PFASs in wastewater in the future.

Investigation on removal of perfluorooctanoic acid (PFOA), perfluorooctane sulfonate (PFOS), perfluorohexane sulfonate (PFHxS) using water treatment sludge and biochar

This work assessed the adsorption performance of three common PFAS compounds (PFOA, PFOS and PFHxS) on two water treatment sludges (WTS) and two biochars (commercial biomass biochar and semi-pilot scale biosolids biochar). Of the two WTS samples included in this study, one was sourced from poly-aluminium chloride (PAC) and the other from alum (Al2(SO4)3). The results of experiments using a single PFAS for adsorption reinforced established trends in affinity - the shorter-chained PFHxS was less adsorbed than PFOS, and the sulphates (PFOS) were more readily adsorbed than the acid (PFOA). Interestingly, PAC WTS, showed an excellent adsorption affinity for the shorter chained PFHxS (58.8%), than the alum WTS and biosolids biochar at 22.6% and 41.74%, respectively. The results also showed that the alum WTS was less effective at adsorption than the PAC WTS despite having a larger surface area. Taken together, the results suggest that the hydrophobicity of the sorbent and the chemistry of the coagulant were critical factors for understanding PFAS adsorption on WTS, while other factors, such as the concentration of aluminium and iron in the WTS could not explain the trends seen. For the biochar samples, the surface area and hydrophobicity are believed to be the main drivers in the different performances. Adsorption from the solution containing multiple PFAS was also investigated with PAC WTS and biosolids biochar, demonstrating comparable performance on overall adsorption. However, the PAC WTS performed better with the short-chain PFHxS than the biosolids biochar. While both PAC WTS and biosolids biochar are promising candidates for adsorption, the study highlights the need to explore further the mechanisms behind PFAS adsorption, which could be a highly variable source to understand better the potential for WTS to be utilized as a PFAS adsorbent.

High-Level Quantum Chemical Prediction of C-F Bond Dissociation Energies of Perfluoroalkyl Substances

In this study, 550 C-F bond dissociation energies (BDEs) of a variety of per- and polyfluoroalkyl substances (PFASs) obtained from high-level DLPNO-CCSD(T)/CBS calculations were used to assess the accuracy of contemporary density functional theory (DFT) and semiempirical methods. DLPNO-CCSD(T)/CBS gas phase C-F BDEs fall between 404.9-550.7 kJ mol-1 and M06-2X and ωB97M-V in conjunction with the aug-cc-pVTZ basis set predicted BDEs closest to the benchmark level with a mean absolute deviation (MAD) of 7.3 and 8.3 kJ mol-1, respectively. It was observed that DFT prediction errors increase with the degree of fluorination and system size. As such, previous model chemistry recommendations based on smaller nonfluorinated systems may not be carried over to modeling the energetics of PFASs and related systems.

Thermal Phase Transition and Rapid Degradation of Forever Chemicals (PFAS) in Spent Media Using Induction Heating

In this study, we have developed an innovative thermal degradation strategy for treating per- and polyfluoroalkyl substance (PFAS)-containing solid materials. Our strategy satisfies three criteria: the ability to achieve near-complete degradation of PFASs within a short timescale, nonselectivity, and low energy cost. In our method, a metallic reactor containing a PFAS-laden sample was subjected to electromagnetic induction that prompted a rapid temperature rise of the reactor via the Joule heating effect. We demonstrated that subjecting PFASs (0.001-12 μmol) to induction heating for a brief duration (e.g., <40 s) resulted in substantial degradation (>90%) of these compounds, including recalcitrant short-chain PFASs and perfluoroalkyl sulfonic acids. This finding prompted us to conduct a detailed study of the thermal phase transitions of PFASs using thermogravimetric analysis and differential scanning calorimetry (DSC). We identified at least two endothermic DSC peaks for anionic, cationic, and zwitterionic PFASs, signifying the melting and evaporation of the melted PFASs. Melting and evaporation points of many PFASs were reported for the first time. Our data suggest that the rate-limiting step in PFAS thermal degradation is linked with phase transitions (e.g., evaporation) occurring on different time scales. When PFASs are rapidly heated to temperatures similar to those produced during induction heating, the evaporation of melted PFAS slows down, allowing for the degradation of the melted PFAS.

Avoiding artifacts in the determination of per- and polyfluoroalkyl substance sorbent-water distribution

Characterizing sorbent affinity for a target compound (described by sorbent-water distribution coefficient, Ksw) is a necessary step in the sorbent selection and performance-testing process in the process of capturing aquatic contaminants. However, no standardized procedure exists to measure Ksw, and studies display significant variations in set-up and performance. For per- and polyfluoroalkyl substances (PFAS), most Ksw determinations employ batch experiments with small-scale water-sorbent mixtures, methanol-based spike of target compound(s), and analysis after assumed equilibrium, but methodological details of the above procedure differ and might cause artifacts in the determination of Ksw. We conducted several batch experiments systematically varying a general procedure to characterize effects of sub-optimal experimental design. Using a selection of PFAS (6-carbon fluorinated chain length with differing functional groups) and two sorbents, we tested variations of solution:sorbent ratio, methanol content, and PFAS initial concentration, and compared derived Ksw values. Each methodological component affected log(Ksw), usually by suppressing the value (by 0-48%) when compared with a "best design" procedure. Thus, we suggest (1) a reference procedure for PFAS and sorbents used here, and (2) general guidelines for batch experiment design with different compounds and sorbents. Additionally, we report well-constrained Ksw values for 23 PFAS and two sorbents.

C57BL/6J mice exposed to perfluorooctanoic acid demonstrate altered immune responses and increased seizures after Theiler's murine encephalomyelitis virus infection

Introduction

Neurological diseases can stem from environmental influences such as antecedent viral infections or exposure to potential toxicants, some of which can trigger immune responses leading to neurological symptoms. Theiler's murine encephalomyelitis virus (TMEV) is used to model human neurological conditions associated with prior viral infections, with outcomes partly attributable to improper induction and regulation of the immune response. Perfluorooctanoic acid (PFOA) can alter pathologies known to influence neurological disease such as inflammatory responses, cytokine expression, and glial activation. Co-exposure to TMEV and PFOA was used to test the hypothesis that early life exposure to the potential immunotoxicant PFOA would affect immune responses so as to render TMEV-resistant C57BL/6J (B6) mice susceptible to viral-induced neurological disease.

Methods

Neonate B6 mice were exposed to different treatments: non-injected, sham-infected with PBS, and TMEV-infected, with the drinking water of each group including either 70 ppt PFOA or filtered water. The effects of PFOA were evaluated by comparing neurological symptoms and changes in immune-related cytokine and chemokine production induced by viral infection. Immune responses of 23 cytokines and chemokines were measured before and after infection to determine the effects of PFOA exposure on immune response.

Results

Prior to infection, an imbalance between Th1, Th2, and Treg cytokines was observed in PFOA-exposed mice, suppressing IL-4 and IL-13 production. However, the balance was restored and characterized by an increase in pro-inflammatory cytokines in the non-infected group, and a decrease in IL-10 in the PFOA + TMEV group. Furthermore, the PFOA + TMEV group experienced an increase in seizure frequency and severity.

Discussion

Overall, these findings provide insight into the complex roles of immune responses in the pathogenesis of virus-associated neurological diseases influenced by co-exposures to viruses and immunotoxic compounds.

Impact of effluent organic matter on perfluoroalkyl acid removal from wastewater effluent by granular activated carbon and alternative adsorbents

Occurrence of perfluoroalkyl acids (PFAAs) in wastewater effluent coupled with increasingly stringent regulations has increased the need for more effective sorption-based PFAA treatment approaches. This study investigated the impact of ozone (O3)- biologically active filtration (BAF) as integral components of non-reverse osmosis (RO)-based potable reuse treatment trains and as a potential pretreatment option to improve adsorptive PFAA removal from wastewater effluent by nonselective (e.g., granular activated carbon (GAC) and selective (e.g., anionic exchange resins (AER) and surface-modified clay (SMC)) adsorbents. For nonselective GAC, O3 and BAF resulted in similar PFAA removal improvements, while BAF alone performed better than O3 for AER and SMC. O3-BAF in tandem resulted in the highest PFAA removal performance improvement among pretreatments investigated for selective and nonselective adsorbents. Side by side evaluation of the dissolved organic carbon (DOC) breakthrough curves and size exclusion chromatography (SEC) for each pretreatment scenario suggested that despite the higher affinity of selective adsorbents towards PFAAs, the competition between PFAA and effluent organic matter (EfOM) (molecular weights (MWs): 100-1000 Da) negatively impacts the performance of these adsorbents. The SEC results also demonstrated that transformation of hydrophobic EfOM to more hydrophilic molecules during O3 and biotransformation of EfOM during BAF were the dominant mechanisms responsible for alleviating the competition between PFAA and EfOM, resulting in PFAA removal improvement.

Research Progress of Perfluoroalkyl Substances in Edible Oil-A Review

Perfluoroalkyl substances (PFASs) have been widely used in different types of consumer and industrial applications such as surfactants, household cleaning products, textiles, carpets, cosmetics, firefighting foams, and food packaging because of their good stability and special physicochemical properties of hydrophobicity, oleophobicity, high temperature resistance, etc. Meanwhile, PFASs are considered an emerging organic pollutant due to their persistence and potential toxicity to human health. PFASs occur in edible oil, an important component of the global diet, mainly in three ways: raw material contamination, process contamination, and migration from oil contact materials. Thus, the occurrence of PFAS in edible oils has drawn more and more attention in recent years. In this work, the pertinent literature of the last two decades from the Web of Science database was researched. This review systematically addressed the potential sources, the contamination levels, and the progress of the determination of PFASs in edible oil. It aims to provide a relatively whole profile of PFASs in edible oil, render assistance to minimise human exposure to PFASs, and standardise the detection methods of perfluoroalkyl substances in edible oil.

Polanyi adsorption potential theory for estimating PFAS treatment with granular activated carbon

Per- and polyfluoroalkyl substances (PFAS) are a group of chemicals that have gained interest because some PFAS have been shown to have negative health effects and prolonged environmental and biological persistence. Chemicals classified as PFAS have a wide range of chemical moieties that impart widely variable properties, leading to a range of water treatment process efficacies. The Polanyi Potential Adsorption Theory was used to estimate Freundlich isotherm parameters to predict the efficacy of granular activated carbon (GAC) treatment for 428 PFAS chemicals for which the vast majority had no previously published treatment data. This method accounts for the physical/chemical characteristics of the individual PFAS beyond molecular weight or chain length that have previously been employed. From a statistical analysis of available data and model results, many of the 428 PFAS were predicted to be effectively treatable by GAC. Although not directly applicable to full-scale design, the approach demonstrates a systematic method for predicting the effectiveness of GAC where isotherm or column data are not available. This then can be used to prioritize future research.

Occurrence of per- and polyfluoroalkyl substances in aquatic environments and their removal by advanced oxidation processes

Per- and polyfluoroalkyl substances (PFAS), one of the main categories of emerging contaminants, are a family of fluorinated organic compounds of anthropogenic origin. PFAS can endanger the environment and human health because of their wide application in industries, long-term persistence, unique properties, and bioaccumulation potential. This study sought to explain the accumulation of different PFAS in water bodies. In aquatic environments, PFAS concentrations range extensively from <0.03 (groundwater; Melbourne, Australia) to 51,000 ng/L (Groundwater, Sweden). Additionally, bioaccumulation of PFAS in fish and water biota has been stated to range from 0.2 (Burbot, Lake Vättern, Sweden) to 13,900 ng/g (Bluegill samples, U.S.). Recently, studies have focused on PFAS removal from aqueous solutions; one promising technique is advanced oxidation processes (AOPs), including microwaves, ultrasound, ozonation, photocatalysis, UV, electrochemical oxidation, the Fenton process, and hydrogen peroxide-based and sulfate radical-based systems. The removal efficiency of PFAS ranges from 3% (for MW) to 100% for UV/sulfate radical as a hybrid reactor. Therefore, a hybrid reactor can be used to efficiently degrade and remove PFAS. Developing novel, efficient, cost-effective, and sustainable AOPs for PFAS degradation in water treatment systems is a critical area of research.

Environmental and health impacts of PFAS: Sources, distribution and sustainable management in North Carolina (USA)

Poly- and perfluoroalkyl substances (PFAS) are a class of manufactured chemicals that have recently attracted a great deal of attention from environmental regulators and the general public because of their high prevalence, resistance to degradation, and potential toxicity. This review summarizes the current state of PFAS and its effects on the environment of North Carolina, USA. Specific emphasis has been placed to identify i) the sources of PFAS in North Carolina ii) distribution of PFAS in different environmental segments of North Carolina, including surface water, groundwater, air, and sediment iii) drinking water contamination iv) impact of PFAS on human health v) PFAS accumulation in fish and other biota vi) status of PFAS removal from drinking water and finally vi) socioeconomic impact of PFAS uncertainties. Continuous discharges of PFAS occur in the North Carolina environment from direct and indirect sources, including manufacturing sites, firefighting foam, waste disposal and treatment plants, landfill leachate, and industrial emissions. PFAS are widespread in many environmental segments of North Carolina. They are more likely to be detected in surface and groundwater sediments and can enter aquatic bodies through direct discharge and wet and dry deposition of emissions. Eventually, some adverse effects of PFAS have already been reported in North Carolina residents who could have been exposed to the chemicals through contaminated drinking water. Furthermore, PFAS were also found in blood samples from fish and alligators. PFAS were confirmed to be present in water, sediment, organic compounds, and aquatic species at all levels of the food web. However, there is still a substantial amount of work to be done to understand the actual contamination by PFAS in North Carolina comprehensively.

Identifying and sharing per-and polyfluoroalkyl substances hot-spot areas and exposures in drinking water

Exposure to per- and polyfluoroalkyl substances (PFAS) in drinking water is widely recognized as a public health concern. Decision-makers who are responsible for managing PFAS drinking water risks lack the tools to acquire the information they need. In response to this need, we provide a detailed description of a Kentucky dataset that allows decision-makers to visualize potential hot-spot areas and evaluate drinking water systems that may be susceptible to PFAS contamination. The dataset includes information extracted from publicly available sources to create five different maps in ArcGIS Online and highlights potential sources of PFAS contamination in the environment in relation to drinking water systems. As datasets of PFAS drinking water sampling continue to grow as part of evolving regulatory requirements, we used this Kentucky dataset as an example to promote the reuse of this dataset and others like it. We incorporated the FAIR (Findable, Accessible, Interoperable, and Reusable) principles by creating a Figshare item that includes all data and associated metadata with these five ArcGIS maps.

Mechanistic Investigations of Thermal Decomposition of Perfluoroalkyl Ether Carboxylic Acids and Short-Chain Perfluoroalkyl Carboxylic Acids

In this study, we investigated the thermal decomposition mechanisms of perfluoroalkyl ether carboxylic acids (PFECAs) and short-chain perfluoroalkyl carboxylic acids (PFCAs) that have been manufactured as replacements for phased-out per- and polyfluoroalkyl substances (PFAS). C-C, C-F, C-O, O-H, and C═C bond dissociation energies were calculated at the M06-2X/Def2-TZVP level of theory. The α-C and carboxyl-C bond dissociation energy of PFECAs declines with increasing chain length and the attachment of an electron-withdrawing trifluoromethyl (-CF3) group to the α-C. Experimental and computational results show that the thermal transformation of hexafluoropropylene oxide dimer acid to trifluoroacetic acid (TFA) occurs due to the preferential cleavage of the C-O ether bond close to the carboxyl group. This pathway produces precursors of perfluoropropionic acid (PFPeA) and TFA and is supplemented by a minor pathway (CF3CF2CF2OCFCF3COOH → CF3CF2CF2· + ·OCFCF3COOH) through which perfluorobutanoic acid (PFBA) is formed. The weakest C-C bond in PFPeA and PFBA is the one connecting the α-C and the β-C. The results support (1) the C-C scission in the perfluorinated backbone as an effective PFCA thermal decomposition mechanism and (2) the thermal recombination of radicals through which intermediates are formed. Additionally, we detected a few novel thermal decomposition products of studied PFAS.

Surface-modified biopolymers for removing mixtures of per- and polyfluoroalkyl substances from water: Screening and removal mechanisms

Green, renewable, and sustainable materials are needed for removing per- and polyfluoroalkyl substances (PFASs) in water. Herein, we synthesized and tested alginate (ALG) and chitosan (CTN) based and polyethyleneimine (PEI) functionalized fibers/aerogels for the adsorption of mixtures of 12 PFASs (9 short- and long-chain PFAAs, GenX, and 2 precursors) from water at an initial concentration of 10 μg/L each. Out of 11 biosorbents, ALGPEI-3 and GTH CTNPEI aerogels had the best sorption performance. Through detailed characterization of the sorbents before and after PFASs sorption, it was revealed that hydrophobic interaction was the dominant mechanism controlling PFASs sorption while electrostatic interactions played a minor role. As a result, both aerogels had fast and superior sorption of relatively hydrophobic PFASs from pH 2 to 10. Even at extreme pH conditions, the aerogels retained their shape perfectly. Based upon the isotherms, the maximum adsorption capacity of ALGPEI-3 and GTH-CTNPEI aerogels towards total PFASs removal was 3045 and 12,133 mg/g, respectively. Although the sorption performance of the GTH-CTNPEI aerogel toward short chain PFAS was less than satisfactory and varied between 70 and 90% in 24 h, it may find its use in removing relatively hydrophobic PFAS at high concentrations in complex and extreme environments.

Per/polyfluoroalkyl substances modulate plasmid transfer of antibiotic resistance genes: A balance between oxidative stress and energy support

Emerging contaminants can accelerate the transmission of antibiotic resistance genes (ARGs) from environmental bacteria to human pathogens via plasmid conjugation, posing a great challenge to the public health. Although the toxic effects of per/polyfluoroalkyl substances (PFAS) as persistent organic pollutants have been understood, it is still unclear whether and how PFAS modulate the transmission of ARGs. In this study, we for the first time reported that perfluorooctanoic acid (PFOA), perfluorododecanoic acid (PFDoA) and ammonium perfluoro (2-methyl-3-oxahexanoate) (GenX) at relatively low concentrations (0.01, 0.1 mg/L) promoted the conjugative transfer of plasmid RP4 within Escherichia coli, while the plasmid conjugation was inhibited by PFOA, PFDoA and GenX at relatively high concentrations (1, 10 mg/L). The non-unidirectional conjugation result was ascribed to the co-regulation of ROS overproduction, enhanced cell membrane permeability, shortage of energy support as well as l-arginine pool depletion. Taking the well-known PFOA as an example, it significantly enhanced the conjugation frequency by 1.4 and 3.4 times at relatively low concentrations (0.01, 0.1 mg/L), respectively. Exposure to PFOA resulted in enhanced cell membrane permeability and ROS overproduction in donor cells. At high concentrations of PFOA (1, 10 mg/L), although enhanced oxidative stress and cell membrane permeability still occurred, the ATP contents in E. coli decreased, which contributed to the inhibited conjugation. Transcriptome analysis further showed that the expression levels of genes related to arginine biosynthesis (argA, argC, argF, argG, argI) and transport (artJ, artM, artQ) pathways were significantly increased. Intracellular l-arginine concentration deficiency were observed at high concentrations of PFOA. With the supplementary exogenous arginine, it was demonstrated that arginine upregulated conjugation transfer- related genes (trfAp, trbBp) and restores the cell number of transconjugants in PFOA-treated group. Therefore, the inhibited conjugation at high concentrations PFOA were attributed to the shortage of ATP and the depletion of L-arginine pool. These findings provide important insights into the effect environmental concentrations of PFAS on the conjugative transfer of ARGs, and update the regulation mechanism of plasmid conjugation, which is critical for the management of antibiotic resistance in aquatic environments.

A Review: Per- and Polyfluoroalkyl Substances-Biological Degradation

Per- and polyfluoroalkyl substances (PFASs), highly stable synthetic organic compounds with multiple carbon-fluorine bonds, are emerging as environmental contaminants, toxic, bioaccumulative, and environmentally persistent. PFASs are strongly resistant to biological and chemical degradation, and therefore PFASs present a challenge to researchers and scientists for a better understanding and application of remediation methods and biodegradation of PFASs and have become subject to strict government regulations. The review summarizes the recent knowledge of bacterial and fungal degradation of PFASs, as well as the enzymes involved in the processes of transformation/degradation of PFASs.

A review of the occurrence, transformation, and removal technologies for the remediation of per- and polyfluoroalkyl substances (PFAS) from landfill leachate

Per- and polyfluoroalkyl substances (PFAS) are persistent organic pollutants (POPs) that pose significant environmental and human health risks. The presence of PFAS in landfill leachate is becoming an increasingly concerning issue. This article presents a comprehensive review of current knowledge and research gaps in monitoring and removing PFAS from landfill leachate. The focus is on evaluating the effectiveness and sustainability of existing removal technologies, and identifying areas where further research is needed. To achieve this goal, the paper examines the existing technologies for monitoring and treating PFAS in landfill leachate. The review emphasizes the importance of sample preparation techniques and quality assurance/quality control measures in ensuring accurate and reliable results. Then, this paper reviewed the existing technologies for removal and remediation of PFAS in landfill leachates, such as adsorption, membrane filtration, photocatalytic oxidation, electrocatalysis, biodegradation, and constructed wetlands. Additionally, the paper summarizes the factors that exhibit the performance of various treatment technologies: reaction time, experimental conditions, and removal rates. Furthermore, the paper evaluates the potential application of different remediation technologies (i.e., adsorption, membrane filtration, photocatalytic oxidation, electrocatalysis, biodegradation, and constructed wetlands, etc.) in treating landfill leachate containing PFAS and its precursors, such as fluorotelomeres like FTOH and FTSs. The review highlights the importance of considering economic, technical, and environmental factors when selecting control measures. Overall, this article aims to provide guidance for promoting environmental protection and sustainable development in the context of PFAS contamination in landfill leachate.

Irreversible fluorine covalent organic framework based probe nanoelectrospray ionization mass spectrometry for direct and rapid determination of perfluoroalkyl carboxylic acids

Probe nanoelectrospray ionization mass spectrometry (PESI-MS) is practically desirable for rapid and ultra-sensitive analysis of trace contaminants in environment, but limited with the stable and selective probe coating. Herein, we show the design and preparation of irreversible fluorine-based covalent organic framework (TFPPA-F₄) covalently bonded probe to couple with ESI-MS (TFPPA-F₄-PESI-MS) for direct and rapid determination of perfluoroalkyl carboxylic acids (PFCAs) in environmental water. Chemical bonding coating of irreversible crystalline TFPPA-F₄ not only improved stability of the probe, but also offered accessible multiple interactions including hydrophobic, hydrogen bonding and F-F interactions to promote the kinetics and selectivity for PFCAs. The proposed TFPPA-F₄-PESI-MS realized rapid determination of PFCAs (about 4 min) with low limits of detection of 0.06-0.88 ng L^-1 and wide linear range of 1-5000 ng L^-1 (R² of 0.9982-0.9998). Recoveries for the spiked lake and pond water were 85.9-111.1 %. TFPPA-F₄ based probe can maintain the extraction performance after 100 times of extraction. This work shows the great potential of the irreversible covalent organic framework based PESI-MS in rapid and ultra-sensitive determination of contaminants in environmental samples.

Enhanced adsorption of short-chain perfluorobutanoic acid by functionalized periodic mesoporous organosilica: Performance and mechanisms

Removal of short-chain per- and polyfluoroalkyl substances (PFAS) represents a unique challenge in comparison to the long-chain homologs. In this study, a series of functionalized periodic mesoporous organosilica (PMO) materials with tunable molar ratio of fluoroalkyl to amine functional groups were developed and used as platform adsorbents to investigate the adsorption behavior of short-chain PFAS, with a focus on perfluorobutanoic acid (PFBA). Modification with fluoroalkyl group substantially enhanced the adsorption affinity of PFBA with the functionalized PMO materials. Adsorption free energy analysis suggested that although electrostatic interactions were more predominant in PFBA adsorption, modification of PMOs with increased fluoroalkyl group loadings increased the non-electrostatic interactions with PFBA, resulting in more favorable PFBA adsorption. The optimal functionalized PMO showed fast PFBA adsorption kinetics, excellent PFBA removal efficiency in various water chemistry conditions, and can be regenerated and reused for numerous cycles with methanol/water mixture containing 500-mM NH₃·H₂O as regenerant. Furthermore, the optimal functionalized PMO showed robust performance for the removal of PFAS mixtures under complex natural water matrix. Results of this study suggested the important role of non-electrostatic interactions in enhancing the removal of short-chain PFAS and can provide mechanistic insights into guiding the design of improved adsorbents for PFAS removal.

Mechanisms of propeller jet-induced migration, release, and distribution of perfluoroalkyl acids in sediment-water systems

Perfluoroalkyl acids (PFAAs) are continuously accumulated in surface sediments due to extensive and long-term application. However, the mechanisms through which disturbances induced by ship propeller jets at the riverbed cause secondary release of PFAAs from sediments remain unclear. In this study, the effects of different propeller rotational speeds on PFAA migration, release, and distribution in multiphase media were investigated by performing indoor flume experiments combined with particle tracking velocimetry. Moreover, key factors influencing PFAA migration and distribution were identified, and partial least squares regression (PLS) method was applied to develop quantitative prediction models of relationships among hydrodynamics, physicochemical parameters, and PFAA distribution coefficients. The total PFAA concentrations (ΣPFAAs) in overlying water under propeller jet action exhibited transient characteristics and hysteresis with time after the disturbance. In contrast, the ΣPFAAs in suspended particulate matter (SPM) exhibited an upward trend throughout the process with consistent characteristics. The spatial distribution trends of PFAAs in overlying water and SPM at different propeller rotational speeds featured vertical variability and axial consistency. Furthermore, PFAA release from sediments was driven by axial flow velocity (V_x) and Reynolds normal stress R_yy, while PFAA release from porewater was inextricably linked to Reynolds stresses R_xx, R_xy, and R_zz (p < 0.05). PLS regression models showed that variations in Vorticity, dissolved organic carbon, and pH influenced the decreases in PFAA distribution coefficients between SPM and overlying water (K_D-SW) as propeller rotational speed increased, except for very long-chain PFAAs (C > 10). The increases in PFAA distribution coefficients between sediment and porewater (K_D-SP) were mainly determined by physicochemical parameters of sediments, and the direct effect of hydrodynamics was relatively weak. Our study provides valuable information regarding the migration and distribution of PFAAs in multiphase media under propeller jet disturbance (both during and after disturbance).

Biochar-compost as a new option for soil improvement: Application in various problem soils

Due to the synergistic effects of biochar and compost/composting, the combined application of biochar and compost (biochar-compost) has been recognized as a highly promising and efficient method of soil improvement. However, the willingness to apply biochar-compost for soil improvement is still low compared to the use of biochar or compost alone. This paper collects data on the application of biochar-compost in several problem soils that are well-known and extensively investigated by agronomists and scientists, and summarizes the effects of biochar-compost application in common problem soils. These typical problem soils are classified based on three different characteristics: climatic zones, abiotic stresses, and contaminants. The improvement effect of biochar-compost in different soils is assessed and directions for further research and suggestions for application are made. Generally, biochar-compost mitigates the high mineralization rate of soil organic matter, phosphorus deficiency and aluminum toxicity, and significantly improves crop yields in most tropical soils. Biochar-compost can help to achieve long-term sustainable management of temperate agricultural soils by sequestering carbon and improving soil physicochemical properties. Biochar-compost has shown positive performance in the remediation of both dry and saline soils by reducing the threat of soil water scarcity or high salinity and improving the consequent deterioration of soil conditions. By combining different mechanisms of biochar and compost to immobilize or remove contaminants, biochar-compost tends to perform better than biochar or compost alone in soils contaminated with heavy metals (HMs) or organic pollutants (OPs). This review aims to improve the practicality and acceptability of biochar-compost and to promote its application in soil. Additionally, the prospects, challenges and future directions for the application of biochar-compost in problem soil improvement were foreseen.

The Minus Approach Can Redefine the Standard of Practice of Drinking Water Treatment

Chlorine-based disinfection for drinking water treatment (DWT) was one of the 20th century's great public health achievements, as it substantially reduced the risk of acute microbial waterborne disease. However, today's chlorinated drinking water is not unambiguously safe; trace levels of regulated and unregulated disinfection byproducts (DBPs), and other known, unknown, and emerging contaminants (KUECs), present chronic risks that make them essential removal targets. Because conventional chemical-based DWT processes do little to remove DBPs or KUECs, alternative approaches are needed to minimize risks by removing DBP precursors and KUECs that are ubiquitous in water supplies. We present the "Minus Approach" as a toolbox of practices and technologies to mitigate KUECs and DBPs without compromising microbiological safety. The Minus Approach reduces problem-causing chemical addition treatment (i.e., the conventional "Plus Approach") by producing biologically stable water containing pathogens at levels having negligible human health risk and substantially lower concentrations of KUECs and DBPs. Aside from ozonation, the Minus Approach avoids primary chemical-based coagulants, disinfectants, and advanced oxidation processes. The Minus Approach focuses on bank filtration, biofiltration, adsorption, and membranes to biologically and physically remove DBP precursors, KUECs, and pathogens; consequently, water purveyors can use ultraviolet light at key locations in conjunction with smaller dosages of secondary chemical disinfectants to minimize microbial regrowth in distribution systems. We describe how the Minus Approach contrasts with the conventional Plus Approach, integrates with artificial intelligence, and can ultimately improve the sustainability performance of water treatment. Finally, we consider barriers to adoption of the Minus Approach.

Combination of adsorption/desorption and photocatalytic reduction processes for PFOA removal from water by using an aminated biosorbent and a UV/sulfite system

Per- and polyfluoroalkyl substances (PFAS) are stable organic chemicals, which have been used globally since the 1940s and have caused PFAS contamination around the world. This study explores perfluorooctanoic acid (PFOA) enrichment and destruction by a combined method of sorption/desorption and photocatalytic reduction. A novel biosorbent (PG-PB) was developed from raw pine bark by grafting amine groups and quaternary ammonium groups onto the surface of bark particles. The results of PFOA adsorption at low concentration suggest that PG-PB has excellent removal efficiency (94.8%-99.1%, PG-PB dosage: 0.4 g/L) to PFOA in the concentration range of 10 μg/L to 2 mg/L. The PG-PB exhibited high adsorption efficiency regarding PFOA, being 456.0 mg/g at pH 3.3 and 258.0 mg/g at pH 7 with an initial concentration of 200 mg/L. The groundwater treatment reduced the total concentration of 28 PFAS from 18 000 ng/L to 9900 ng/L with 0.8 g/L of PG-PB. Desorption experiments examined 18 types of desorption solutions, and the results showed that 0.05% NaOH and a mixture of 0.05% NaOH + 20% methanol were efficient for PFOA desorption from the spent PG-PB. More than 70% (>70 mg/L in 50 mL) and 85% (>85 mg/L in 50 mL) of PFOA were recovered from the first and second desorption processes, respectively. Since high pH promotes PFOA degradation, the desorption eluents with NaOH were directly treated with a UV/sulfite system without further adjustment. The final PFOA degradation and defluorination efficiency in the desorption eluents with 0.05% NaOH + 20% methanol reached 100% and 83.1% after 24 h reaction. This study proved that the combination of adsorption/desorption and a UV/sulfite system for PFAS removal is a feasible solution for environmental remediation.

Development of novel fluor mop materials for remediation of perfluoroalkyl substances (PFAS) from groundwater

In this study we synthesized a library of 12 novel adsorbent materials that utilize a chemically well-defined silica support for superior removal of PFAS from real groundwater from a contaminated United States Air Force base. The library of sorbents probed the importance of a fluorous, hydrophobic, and electrostatic components in the removal efficacy. The materials were assessed in batch studies with PFOA, PFOS, and PFBA and compared directly to GAC and Ion Exchange resin. Adsorption kinetics with PFOS were best fit to a pseudo-second order model and equilibrium data fit well to a Langmuir isotherm model. The results were also validated externally, and the best performing material removed greater than 90% of 8 PFAS tested and was able to be regenerated up to 5 cycles. The results provide a top performing material that with further testing can be used to clean up environmentally contaminated water and provide support for the theory that a fluorous component when combined with the electrostatic and hydrophobic components, imparts both enhanced PFAS selectivity and functional resilience to the material.

Perfluorooctanoic acid induces cell death in TM3 cells via the ER stress-mitochondrial apoptosis pathway

Perfluorooctanoic acid (PFOA) is an environmentally ubiquitous synthetic chemical highly persistent in organisms. PFOA exposure is pernicious to reproductive health as indicated by reports of male infertility. However, the PFOA toxicity mechanism to Leydig cells remains poorly understood. Therefore, this study aimed to investigate the toxicological events occurring in TM3 Leydig cells treated with PFOA (250, 500, 750µM) for 24h. PFOA was shown to significantly decrease cell viability resulting from inhibition of proliferation and elevation of apoptotic ratio in a dose dependent manner. Upregulation of pro-apoptotic gene expressions such as Bax, Bad, and p53, was observed in combination with an increase in the apoptosis-related protein levels of Bax, cleaved caspase-3, cleaved caspase-8, and phosphorylated p53. Furthermore, exposure of PFOA lead to mitochondrial damage involving mitochondrial membrane permeabilization. A release of cytochrome c and collapse of the mitochondrial membrane potential (∆Ψm) were observed compared to the untreated control. Additionally, PFOA stimulated unfolded protein response (UPR) upregulating ER stress marker, Bip/GRP78, and upregulated protein levels of UPR signal molecules IRE1, p-JNK, p-ERK1/2, p-p53, CHOP, and ERO1. Overall, the present study elucidated the ER stress-mitochondrial apoptosis pathway-related molecular mechanisms involved in PFOA-induced cell death in TM3 Leydig cells.

Effective PFAS degradation by electrochemical oxidation methods-recent progress and requirement

The presence of per- and poly-fluoroalkyl substances (PFASs) in water is of global concern due to their high stability and toxicity even at very low concentrations. There are several technologies for the remediation of PFASs, but most of them are inadequate either due to limited effectiveness, high cost, or production of a large amount of sludge. Electrochemical oxidation (EO) technology shows great potential for large-scale application in the degradation of PFASs due to its simple procedure, low loading of chemicals, and least amount of waste. Here, we have reviewed the recent progress in EO methods for PFAS degradation, focusing on the last 10 years, to explore an efficient, cost-effective, and environmentally benign remediation technology. The effects of important parameters (e.g., anode material, current density, solution pH, electrolyte, plate distance, and electrical connector type) are summarized and evaluated. Also, the energy consumption, the consequence of different PFASs functional groups, and water matrices are discussed to provide an insight that is pivotal for developing new EO materials and technologies. The proposed degradation pathways of shorter-chain PFAS by-products during EO of PFAS are also discussed.