Analysis of polar pesticides in water and wine samples by automated in-tube solid-phase microextraction coupled with high-performance liquid chromatography-mass spectrometry

A simple and rapid method for simultaneous determination of benzoic and sorbic acids in food using in-tube solid-phase microextraction coupled with high-performance liquid chromatography

A simple, rapid and sensitive on-line method for the simultaneous determination of benzoic and sorbic acids in food was developed by coupling in-tube solid-phase microextraction (SPME) to high-performance liquid chromatography (HPLC) with UV detection. The diethylamine-modified poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolithic capillary selected as the extraction medium exhibited a high extraction capability towards benzoic and sorbic acids. To obtain optimum extraction performance, several in-tube SPME parameters were investigated, including pH value, inorganic salt, and the organic solvent content of the sample matrix. After simple dilution with 0.02 mol/L phosphate solution (pH 4.0), carbonated drink, juice drink, sauce and jam samples could be directly injected for extraction. For succade samples, a small amount of acetonitrile was required to extract analytes prior to dilution and subsequent extraction. The linearity of the method was investigated over a concentration range of 5-20000 ng/mL for both analytes, and the correlation coefficients (R2 values) were higher than 0.999. The detection limits for benzoic and sorbic acids were 1.2 and 0.9 ng/mL, respectively. The method reproducibility was tested by evaluating the intra- and interday precisions; relative standard deviations of less than 4.4 and 9.9%, respectively, were obtained. Recoveries of compounds from spiked food samples ranged from 84.4 to 106%. The developed method was shown to be suitable for the routine monitoring of benzoic and sorbic acids in various types of food samples.

Measurement uncertainty arising from trueness of the analysis of two endocrine disruptors and their metabolites in environmental samples

In this work, a preconcentration method for the simultaneous determination of the endocrine disrupting chemicals (EDCs), diuron (1-(3,4-dichlorophenyl)-3,3-dimethylurea), and linuron (3-(3,4-dichlorophenyl)-1-methoxy-1-methylurea), as well as their metabolites DCPU (1-(3,4-dichlorophenyl) urea), DCPMU (1-(3,4-dichlorophenyl)-3-methylurea) and 3,4-DCA (3,4-dichloroaniline), present in natural waters was optimized and validated. Water was subjected to solid-phase extraction (SPE) and the influence of several experimental variables affecting the extraction efficiency of the target analytes was studied, including the sorbent material, elution solvents, pH and breakthrough volume, as well as some solution parameters that is, ionic strength and organic matter content. A high-performance liquid chromatography system coupled to UV-diode array detector (DAD) was used for the target analytes quantification at the optimum conditions described in Part I. The fully nested experimental design, adapted to the new experimental parameters, was used to study the measurement uncertainty arising from trueness by estimating proportional bias (in terms of recovery). The overall recoveries of the target analytes were in the range of 71.6-90.2%, except 3,4-DCA for which a low overall recovery of 51.4% was obtained. The analytical procedure was shown to be linear over the studied range of concentration (25-400 ng/l), exhibiting satisfactory repeatability and reaching limits of detection in the 1.3-11.2 ng/l range for all, quite different in nature, water types. The SPE method was further applied for the determination of the selected EDCs and their metabolites in water samples taken from selected study stations in the region of Epirus (N.W. Greece) corresponding to the sediment samples locations (Part I).

Current trends in solid-phase-based extraction techniques for the determination of pesticides in food and environment

Solid-phase extraction (SPE) procedures for pesticide residues in food and environment are reviewed and discussed. The use of these procedures, which include several approaches such as: matrix solid-phase dispersion (MSPD), solid-phase micro-extraction (SPME) and stir-bar sorptive extraction (SBSE), represents an opportunity to reduce analysis time, solvent consumption, and overall cost. SPE techniques differ from solvent extraction depending on the interactions between a sorbent and the pesticide. This interaction may be specific for a particular pesticide, as in the interaction with an immunosorbent, or non-specific, as in the way a number of different pesticides are adsorbed on apolar or polar materials. A variety of applications were classified according to the method applied: conventional SPE, SPME, hollow-fiber micro-extraction (HFME), MSPD and SBSE. Emphasis is placed on the multiresidue analysis of liquid and solid samples.

In-tube solid-phase microextraction-capillary liquid chromatography as a solution for the screening analysis of organophosphorus pesticides in untreated environmental water samples

This paper describes a method for the selective screening of organophosphorus pesticides in water. In-tube solid-phase microextraction (SPME) in an open capillary column coupled to capillary liquid chromatography (LC) with UV detection has been used to effect preconcentration, separation and detection of the analytes in the same assembly. For in-tube SPME two capillary columns of the same length and different internal diameters and coating thicknesses have been tested and compared, a 30 cm x 0.25 mm I.D., 0.25 micro m thickness coating column, and a 30 cm x 0.1 mm I.D., 0.1 micro m of coating thickness column. In both columns the coating was 95% dimethylpolysiloxane (PDMS)-5% diphenylpolysiloxane. The proposed methodology provided limits of detections (LODs) for the tested organophosphorus pesticides in the 0.1-10 micro g/L range, whereas the direct injection of the samples onto the capillary LC system provided LODs in the 50-1000 micro g/L range. The sensitivity of the proposed in-tube SPME-capillary LC method is adequate to monitorize the analyte levels in drinking water. Several triazines, polycyclic aromatic hydrocarbons (PAHs), nonylphenol, organochloride pesticides or polybrominated diphenyl ethers (PBDEs) have been evaluated as possible interferents. The reliability of the described method is demonstrated by analysing different real water samples.

Determination of tsumacide residues in vegetable samples using a flow-injection chemiluminescence method

A sensitive, simple and rapid flow-injection chemiluminescence (FI-CL) method is described to determine tsumacide pesticide residue based on the CL reaction of the alkaline degradation product of tsumacide with acidic KMnO(4) when rhodamine 6G was present. Under the optimum conditions, the relative CL intensity is linear with the concentration of tsumacide in the range of 2.0 x 10(-3)-0.20 mg/L. The detection limit is 6.6 x 10(-4) mg/L (3sigma) and the relative standard deviation for 2.0 x 10(-2) mg/L tsumacide solution was 2.28% (intra-day) and 4.85% (inter-day). The proposed method has been applied to determine the residue of tsumacide in vegetable samples and the recovery test is very satisfactory.

Evaluation of bio-compatible poly(ethylene glycol)-based solid-phase microextraction fiber for in vivo pharmacokinetic studies of diazepam in dogs

Solid-phase microextraction probes based on poly(ethylene glycol)/C18-bonded silica were used for in vivo monitoring of drugs from circulating blood of beagles, over a period of 8 h. After sampling, the extracted drugs were subsequently quantified by liquid chromatography coupled with tandem mass spectrometry. External calibrations in whole blood and phosphate-buffered saline were used to correlate the amount of analytes extracted in regard to the total and free concentrations in blood respectively. The probe provided sufficient sensitivity for the drugs in the blood matrix, while the need for drawing blood was eliminated. The limit of detections of the method from whole blood were 1.7, 1.4 and 2.8 ng mL(-1) for the analysis of diazepam, nordiazepam and oxazepam respectively, and the linear range was from 4 ng mL(-1) to 2 microg mL(-1). The method was applied for the monitoring of pharmacokinetic profiles of intravenous administration of diazepam and its two main metabolites in dogs, and the results were compared with profiles determined by conventional methods. This approach offered increased sensitivity and accuracy, short extraction time, and convenient calibration for in vivo sampling for dynamic monitoring.

Capillary microextraction for simultaneous analysis of multi-residual semivolatile organic compounds in water

Capillary microextractor (CME) in combination with a gas chromatograph-mass spectrometer (GC-MS) was employed for the determination of trace priority hazardous substances in water. Three groups of semivolatile organic compounds (SVOCs), i.e., chlorinated hydrocarbons, pesticides and polycyclic aromatic hydrocarbons (PAHs), were simultaneously determined. SVOCs were extracted from 7 mL of water samples on a 100 cm commercial gas chromatographic column (0.32 mm id x film thickness 0.25 microm, HP-5 capillary column) and eluted with only 3 microL of acetonitrile. The extractant was analyzed by GC-MS in the selected ion monitoring mode. The method showed good linearity over the concentration range 10 ng L(-1) to 3.0 mg L(-1) with correlation coefficients (r) greater than 0.99 and low limits of detection ranged from 10 ng L(-1) to 1.0 mg L(-1). High recovery (more than 80%) was obtained with relative standard deviation less than 10%. The method was successfully applied for trace level analyses of SVOCs in water samples.

Photo-induced Fluorescence of Fluometuron in a Continuous-flow Multicommutation Assembly

This paper deals with the photo-induced fluorimetric determination of the herbicide Fluometuron with the aid of a continuous-flow assembly of the emergent and new methodology known as Multicommutation which was provided with an on-line photoreactor. Maximum fluorescence intensity was observed at basic pH solutions, 1x 10(-4) mol l(-1) NaOH, after 1.4 min of irradiation and being the maximum at lambda(exc) 247.0 nm and lambda(em) 325.0 nm. The influence of different experimental parameters either chemical (pH, surfactants presence, solvent polarity and temperature) or hydrodynamic (time of photo-degradation, size and number of different segments and flow-rate) was tested. The linear dynamic range was from 0.01 to 4.0 mg l(-1) of Fluometuron; the inter-day reproducibility (as R.S.D.) of the slope was 0.001% and 1.7% from the peaks intra-day reproducibility. A large series of potential interferents was studied and finally the method was applied to human urine, soil, formulation and water samples.

Control of pesticide residues by liquid chromatography-mass spectrometry to ensure food safety

Liquid chromatography-mass spectrometry (LC-MS) has become an invaluable technique for the control of pesticide residues to ensure food safety. After an introduction about the regulations that highlights its importance to meet the official requirements on analytical performance, the different mass spectrometers used in this field of research, as well as the LC-MS interfaces and the difficulties associated with quantitative LC-MS determination, are discussed. The ability to use practical data for quantifying pesticides together with the option of obtaining structural information to identify target and non-target parent compounds and metabolites are discussed. Special attention is paid to the impact of sample preparation and chromatography on the ionization efficiency of pesticides from food. The last section is devoted to applications from a food safety point of view. (c) 2006 Wiley Periodicals, Inc.

Mass spectrometry in grape and wine chemistry. Part II: The consumer protection

Controls in food industry are fundamental to protect the consumer health. For products of high quality, warranty of origin and identity is required and analytical control is very important to prevent frauds. In this article, the "state of art" of mass spectrometry in enological chemistry as a consumer safety contribute is reported. Gas chromatography-mass spectrometry (GC/MS) and liquid-chromatography-mass spectrometry (LC/MS) methods have been developed to determine pesticides, ethyl carbamate, and compounds from the yeast and bacterial metabolism in wine. The presence of pesticides in wine is mainly linked to the use of dicarboxyimide fungicides on vineyard shortly before the harvest to prevent the Botrytis cinerea attack of grape. Pesticide residues are regulated at maximum residue limits in grape of low ppm levels, but significantly lower levels in wine have to be detected, and mass spectrometry offers effective and sensitive methods. Moreover, mass spectrometry represent an advantageous alternative to the radioactive-source-containing electron capture detector commonly used in GC analysis of pesticides. Analysis of ochratoxin A (OTA) in wine by LC/MS and multiple mass spectrometry (MS/MS) permits to confirm the toxin presence without the use of expensive immunoaffinity columns, or time and solvent consuming sample derivatization procedures. Inductively coupled plasma-mass spectrometry (ICP/MS) is used to control heavy metals contamination in wine, and to verify the wine origin and authenticity. Isotopic ratio-mass spectrometry (IRMS) is applied to reveal wine watering and sugar additions, and to determine the product origin and traceability.

Application of liquid-phase microextraction and on-column derivatization combined with gas chromatography–mass spectrometry to the determination of carbamate pesticides

A method has been established for the determination of five carbamate pesticides in water samples using liquid-phase microextraction (LPME) followed by on-column derivatization and gas chromatography-mass spectrometric (GC-MS) determination. Trimethylphenylammonium hydroxide (TMPAH) and trimethylsulfonium hydroxide (TMSH) were used as derivatization reagent for extracts prior to GC-MS analysis as carbamate pesticides are thermally labile compounds. Parameters that affect the extraction efficiency (selection of organic solvent and extraction time) and derivatization efficiency (choice of derivatization reagent and concentration of derivatization reagent) were investigated. The proposed method provided good enrichment factors up to 224, with reproducibility ranging from 4.86 to 7.81%, and good linearity from 1 to 400 microg/L. The limits of detection (LODs) ranged between 0.2 and 0.8 microg/L (S/N = 3) using GC-MS with selective ion monitoring. This method was applied to the determination of carbamate pesticides in tap water and waste water.

SPME in environmental analysis

Recent advances in the use of solid-phase microextraction (SPME) in environmental analysis, including fiber coatings, derivatization techniques, and in-tube SPME, are reviewed in this article. Several calibration methods for SPME, including traditional calibration methods, the equilibrium extraction method, the exhaustive extraction method, and several diffusion-based calibration methods, are presented. Recent developed SPME devices for on-site sampling and several applications of SPME in environmental analysis are also introduced.

Strategies for the microextraction of polar organic contaminants in water samples

In this paper the most recent developments in the microextraction of polar analytes from aqueous environmental samples are critically reviewed. The particularities of different microextraction approaches, mainly solid-phase microextraction (SPME), stir-bar-sorptive extraction (SBSE), and liquid-phase microextraction (LPME), and their suitability for use in combination with chromatographic or electrically driven separation techniques for determination of polar species are discussed. The compatibility of microextraction techniques, especially SPME, with different derivatisation strategies enabling GC determination of polar analytes and improving their extractability is revised. In addition to the use of derivatisation reactions, the possibility of enhancing the yield of solid-phase microextraction methods for polar analytes by using new coatings and/or larger amounts of sorbent is also considered. Finally, attention is also focussed on describing the versatility of LPME in its different possible formats and its ability to improve selectivity in the extraction of polar analytes with acid-base properties by using separation membranes and buffer solutions, instead of organic solvents, as the acceptor solution.

Poly(acrylamide-vinylpyridine-N,N′-methylene bisacrylamide) monolithic capillary for in-tube solid-phase microextraction coupled to high performance liquid chromatography

In-tube solid-phase microextraction (SPME) based on a poly(acrylamide-vinylpyridine-N,N'-methylene bisacrylamide) monolithic capillary was investigated and on-line coupled to HPLC for the determination of trace analytes in aqueous samples. The polymer monolith was conveniently synthesized in a fused silica capillary by in situ polymerization method. Several groups of analytes including non-steroidal anti-inflammatory drugs, phenols, non-peptide angiotensin II receptor antagonists and endocrine disrupting chemicals were extracted by the monolithic capillary. High extraction efficiency was achieved for the analytes investigated and great improvement of the limits of detection were obtained in comparison to that of direct chromatographic analysis and strong hydrophobic and ion-exchange interactions between the analytes and the polymer were confirmed. The newly developed monolithic capillary showed excellent reusability and high stability under extreme pH conditions during extraction. The possibility of applying the established method to water sample analysis was also demonstrated.

Electrochemical preparation of composite polyaniline coating and its application in the determination of bisphenol A, 4-n-nonylphenol, 4-tert-octylphenol using direct solid phase microextraction coupled with high performance liquid chromatography

For SPME-HPLC, metal wires with better mechanical strength are preferred over the fused silica fibers. In this article, a novel composite polyaniline (CPANI) doped with PEG and polydimethylsiloxane coating (CPANI fiber) was prepared on a stainless steel wire by a three-electrode system: the fiber was used as the work electrode, a calomel electrode and a platinum electrode were used as the reference and the counter electrodes, respectively. To evaluate the new CPANI coating, the coating was used to extract three kinds of phenols (bisphenol A, 4-n-nonylphenol, and 4-tert-octylphenol) in water samples by direct-SPME mode and then desorbed in commercial SPME-HPLC interface to separation. The extraction procedure was also optimized. Five real water samples were investigated. Good recoveries were gained when environmental samples were analyzed.

Determination of organophosphorus pesticides using membrane-assisted solvent extraction combined with large volume injection-gas chromatography-mass spectrometric detection

Eight organophosphorus pesticides (parathion-methyl, fenitrothion, malathion, fenthion, bromophos, bromophos-ethyl, fenamiphos and ethion) in aqueous samples were analysed by means of membrane-assisted solvent extraction. First a 20 ml extraction vial was filled with 15 ml of aqueous sample. Then the membrane bag consisting of nonporous polypropylene was put into the vial and filled with 800 microl of organic solvent. The analytes were separated from the aqueous layer by transporting them through the membrane material into the small amount of solvent. The technique was fully automated and successfully combinable with large volume extraction and GC-MS. To achieve an optimum performance several extraction conditions were investigated. Cyclohexane was chosen as acceptor phase. Then the impact of salt, methanol, pH value, as well as working parameters like stirring rate of the agitator and extraction time, were studied. Moreover, the influence of matrix effects was examined by adding different concentrations of humic acid sodium salt. Detection limits in the ng/l level were achieved using large volume injection with the injecting volume of 100 microl. The recovery values ranged from 47 to 100% and the relative standard deviation for three standard measurements was between 4 and 12% (except for bromophos-ethyl: 22%). The linear dynamic range was between 0.001 and 70 microg/l. The applicability of the method to real samples was tested by spiking the eight organophosphorus pesticides to red wine, white wine and apple juice samples.

Determination of pesticides in red wines with on-line coupled microporous membrane liquid–liquid extraction-gas chromatography

Microporous membrane liquid-liquid extraction (MMLLE) was coupled on-line with gas chromatography for the determination of pesticides in wine. The MMLLE-GC provided to be efficient and selective and the method was linear, repeatable and sensitive. The limits of detection ranged from 0.05 to 2.3 microg/l and the limits of quantification were 0.2-7.5 microg/l for all the analytes using FID as detector. With MS detection LODs in the range 0.03-0.4 and LOQs of 0.3-3.5 microg/l were achieved. The method was applied to the determination of pesticides in several red wines of different origin.

Application of solid-phase microextraction for determining phenylurea herbicides and their homologous anilines from vegetables

Residues of metobromuron, monolinuron and linuron herbicides and their aniline homologous were analyzed in carrots, onions and potatoes by solid-phase microextraction (SPME) performed with a polyacrylate fiber. A juice was obtained from food samples that were further diluted, and an aliquot was extracted after sodium chloride (14%) addition and pH control. At pH 4 only the phenylureas were extracted. A new extraction at pH 11 allowed the extraction of phenylureas plus homologous aniline metabolites. Determination was carried out by gas chromatography with nitrogen-phosporus detection (NPD) the identity of the determined compounds was studied by gas chromatography-mass spectrometry. Limits of quantification (LOQs) obtained with NPD and MS (selected-ion monitoring) were in the microg/kg order allowing determination of maximum residue levels (MRLs) established in the Spanish regulations. MRLs ranged from 0.02 to 0.1 mg/kg depending on the kind of food and herbicide. Under the proposed conditions matrix effects were low enough to permit calibration with samples proceeding from ecological (non-pesticide treated) crops. Twelve commercial samples of each carrots, onions and potatoes were analyzed and only three samples of potatoes contained residues of linuron at levels below MRLs.

Optimization of a solid-phase microextraction procedure for the determination of herbicides by micellar electrokinetic chromatography

The use of a different optimization procedure that involves Experimental Design (ED) and Artificial Neural Networks (ANN) for the off-line coupling solid-phase microextraction-micellar electokinetic chomatography (SPME-MEKC) is presented. This combination of ED and ANN, mathematical tools not previously used in SPME-MEKC optimization, allowed us to obtain good extraction efficiencies in the SPME procedure for the determination of a group of eleven triazine herbicides in groundwater samples. Both extraction and desorption steps were carried out by solution stirring at 900 rpm. Optimal conditions for the off-line SPME procedure were: extraction with a poly(dimethylsiloxane)/divinylbenzene SPME fiber for 120 min, 10% (w/v) NaCl, desorption time 40 min, and 70% (v/v) of methanol/buffer as desorption mixture. Detection limits lay between 0.80 microg L(-1) and 4.89 microg L(-1). Finally, the optimized method was applied to the determination of these compounds in spiked and non-spiked groundwater samples using a previously optimized MEKC separation.

Development and application of polymer-coated hollow fiber membrane microextraction to the determination of organochlorine pesticides in water

A novel extraction procedure coupled with gas chromatography-mass spectrometric detection for quantification of organochlorine pesticides (OCPs) in water is described. Amphiphilic polyhydroxylated polyparaphenylene (PH-PPP) was synthesized and coated on the surfaces of a porous polypropylene hollow fiber membrane (HFM). Due to the high porosity of the HFM, maximum active surface area to achieve high extraction efficiency is expected. The polymer-coated HFM was used for the extraction of 15 OCPs from water. The extraction efficiency was compared with emerging and established methods such as liquid-phase microextraction (LPME), solid-phase microextraction (SPME) and stir bar sorptive extraction (SBSE) techniques. We term the current procedure as polymer-coated hollow fiber microextraction (PC-HFME). PC-HFME showed good selectivity and sensitivity. Detection limits for OCPs were in the range of 0.001-0.008 microg l(-1). The sensitivity and selectivity of the coated HFM could be adjusted by changing the characteristics of the coated PH-PPP film.

Solid-phase microextraction coupled with high-performance liquid chromatography for the determination of phenylurea herbicides in aqueous samples

Solid-phase microextraction coupled with high-performance liquid chromatography was successfully applied to the analysis of nine phenylurea herbicides (metoxuron, monuron, chlorotoluron, isoproturon, monolinuron, metobromuron, buturon, linuron, and chlorbromuron). Polydimethylsiloxane-divinylbenzene (PDMS-DVB, 60 microm) and Carbowax-templated resin (CW-TPR, 50 microm) fibers were selected from four commercial fibers for further study because of their better extraction efficiencies. The parameters of the desorption procedure were studied and optimized. The effects of the properties of analytes and fiber coatings, carryover, duration and temperature of absorption, pH, organic solvent and ionic strength of samples were also investigated. External calibration with an aqueous standard can be used for the analysis of environmental samples (lake water) using either PDMS-DVB or CW-TPR fibers. Good precisions (1.0-5.9%) are achieved for this method, and the detection limits are at the level of 0.5-5.1 ng/ml.

Headspace solid-phase microextraction in combination with gas chromatography-mass spectrometry for the rapid screening of organophosphorus insecticide residues in strawberries and cherries

A headspace solid-phase microextraction (HS-SPME) method in combination with GC-MS was used for the extraction and quantification of diazinon, fenitrothion, fenthion, parathion ethyl, bromophos methyl, bromophos ethyl and ethion. The method was developed using a 100-microm poly(dimethylsiloxane) fiber. The obtained results showed higher responses of the insecticides after addition of aliquots of water and solvent to the fruit samples. Calibration curves that were constructed for the analytes spiked into strawberry and cherry samples followed linear relationships with good correlation coefficients (R2 > 0.986). Linearity range was between 50 and 500 microg/kg and the precision was found to be lower than 15% when applying the optimized HS-SPME procedure to fruit samples. Limits of detection in both strawberry and cherry samples using GC-MS (selected ion monitoring mode) were below 13 microg/kg. Moreover, the HS-SPME method was applied to the analysis of fruit samples and compared with liquid-liquid extraction. Results obtained in this study were in good agreement with those obtained using liquid-liquid extraction demonstrating that the recommended procedure was a fast, accurate and stable sample pretreatment method obtaining good efficiency for the extraction of organophosporus insecticides from strawberries and cherries.