Using carbon dioxide as a building block in organic synthesis

Activation and functionalisation of carbon dioxide by bis-tris(pyrazolyl)borate-supported divalent samarium and trivalent lanthanide silylamide complexes

Synthesis and reactivity with carbon dioxide (CO2) of divalent samarium in the bis-tris(pyrazolyl)borate ligand environment has been reported. In addition, CO2 activation and functionalisation by lanthanide silylamides in the bis-tris(pyrazolyl)borate ligand environment was demonstrated. Reduction of the Sm(III) precursor [Sm(Tp)2(OTf)] (Tp = hydrotris(1-pyrazolyl)borate; OTf = triflate) with KC8 yielded the insoluble Sm(II) multi-metallic coordination polymer [{Sm(Tp)2}n] 1-Sm. Addition of 1,2-dimethoxyethane (DME) to 1-Sm enabled isolation of the monomeric complex [Sm(Tp)2(DME)] 1-Sm(DME). Complex 1-Sm(DME) reduced CO2 to yield the oxalate-bridged dimeric Sm(III) complex [{Sm(Tp)2}2(μ-η2:η2-O2CCO2)] 2-Sm. The reactions of heteroleptic Ln(III) silylamide complexes [Ln(Tp)2(N'')] (Ln = Y, Sm; N'' = N(SiMe3)2) with CO2 yielded monomeric Ln(III) silyloxides [Ln(Tp)2(OSiMe3)] 3-Ln and trimethylsilyl isocyanate (OCNSiMe3). Complexes 3-Ln are the first crystallographically characterised examples of Ln(III)-OSiMe3 bonds accessed via CO2 activation and functionalisation. Full characterisation data are presented for all complexes, including solid-state molecular structure determination by single-crystal X-ray diffraction.

CO2-Based Polycarbonates through Ring-Opening Polymerization of Cyclic Carbonates Promoted by a NHC-Based Zinc Complex

A backbone-substituted N-heterocyclic carbene (NHC) zinc complex, in combination with alcohol initiators, has been shown to be an effective catalyst for the ring-opening polymerization (ROP) of trimethylene carbonate (TMC) to poly(trimethylene carbonate) (PTMC) devoid of oxetane linkages. The ROP of TMC proceeded in solution to give PTMC, possessing controlled molecular mass (2500 < Mn < 10000) and low dispersity (Đ ∼ 1.2). Changing the alcohol initiators, PTMCs with different end-groups were obtained, included a telechelic polymer. The results of MALDI-ToF and NMR analysis confirmed the controlled/living nature of the present ROP catalytic system, where side reactions, such as inter- and intramolecular transesterifications, were minimized during the polymerization. Solution studies in different solvents demonstrated the polymerization reaction to proceed via a mechanism first order in monomer and in catalyst. The zinc complex was also able to convert substituted cyclic carbonates, which were purposely synthesized from renewable feedstocks such as CO2 and 1,3-diols. For the asymmetric 2-Me TMC monomer, good regioselectivity was observed (Xreg up to 0.92). The excellent control of the polymerization process was finally brought to light through the preparation of polycarbonate/polyether triblock copolymers by using polyethylene glycol (PEG) as a macroinitiator and of well-defined di- and triblock polycarbonate/polylactide copolymers by sequential ROP of TMC and L-LA.

Copper-Based Bio-MOF/GO with Lewis Basic Sites for CO2 Fixation into Cyclic Carbonates and C-C Bond-Forming Reactions

Several measures, including crude oil recovery improvement and carbon dioxide (CO2) conversion into valuable chemicals, have been considered to decrease the greenhouse effect and ensure a sustainable low-carbon future. The Knoevenagel condensation and CO2 fixation have been introduced as two principal solutions to these challenges. In the present study for the first time, bio-metal-organic frameworks (MOF)(Cu)/graphene oxide (GO) nanocomposites have been used as catalytic agents for these two reactions. In view of the attendance of amine groups, biological MOFs with NH2 functional groups as Lewis base sites protruding on the channels' internal surface were used. The bio-MOF(Cu)/20%GO performs efficaciously in CO2 fixation, leading to more than 99.9% conversion with TON = 525 via a solvent-free reaction under a 1 bar CO2 atmosphere. It has been shown that these frameworks are highly catalytic due to the Lewis basic sites, i.e., NH2, pyrimidine, and C═O groups. Besides, the Lewis base active sites exert synergistic effects and render bio-MOF(Cu)/10%GO nanostructures as highly efficient catalysts, significantly accelerating Knoevenagel condensation reactions of aldehydes and malononitrile as substrates, thanks to the high TOF (1327 h-1) and acceptable reusability. Bio-MOFs can be stabilized in reactions using GO with oxygen-containing functional groups that contribute as efficient substitutes, leading to an expeditious reaction speed and facilitating substrate absorption.

Recent Progress on Multi-Component Reactions Involving Nucleophile, Arynes and CO2

Carbon dioxide (CO2) is a non-toxic, abundant and recoverable source of carbon monoxide. Despite its thermodynamically stable and kinetically inert nature, research on CO2 utilisation is ongoing. CO2-based aryne reactions, crucial for synthesising ortho-substituted benzoic acids and their cyclisation products, have garnered significant attention, and multi-component reactions (MCRs) involving CO2, aryne and nucleophilic reagents have been extensively studied. This review highlights recent advancements in CO2 capture reactions utilising phenylalkyne reactive intermediates. Mechanistic insights into these reactions are provided together with prospects for further development in this field.

Spontaneous α-C-H Carboxylation of Ketones by Gaseous CO2 at the Air-water Interface of Aqueous Microdroplets

We present a catalyst-free route for the reduction of carbon dioxide integrated with the formation of a carbon-carbon bond at the air/water interface of negatively charged aqueous microdroplets, at ambient temperature. The reactions proceed through carbanion generation at the α-carbon of a ketone followed by nucleophilic addition to CO2. Online mass spectrometry reveals that the product is an α-ketoacid. Several factors, such as the concentration of the reagents, pressure of CO2 gas, and distance traveled by the droplets, control the kinetics of the reaction. Theoretical calculations suggest that water in the microdroplets facilitates this unusual chemistry. Furthermore, such a microdroplet strategy has been extended to seven different ketones. This work demonstrates a green pathway for the reduction of CO2 to useful carboxylated organic products.

Efficient synthesis of L-malic acid by malic enzyme biocatalysis with CO2 fixation

The malic enzyme (ME) catalyzes the synthesis of L-malic acid (L-MA) from pyruvic acid and CO2 with NADH as the reverse reaction of L-MA decarboxylation. Carboxylation requires excess pyruvic acid, limiting its application. In this study, it was determined that CO2 was the carboxyl donor by parsing the effects of HCO3- and CO2, which provided a basis for improving the L-MA yield. Moreover, the concentration ratio of pyruvic acid to NADH was reduced from 70:1 to 5:1 using CO2 to inhibit decarboxylation and to introduce the ME mutant A464S with a 2-fold lower Km than that of the wild type. Finally, carboxylation was coupled with NADH regeneration, resulting in a maximum L-MA yield of 77 % based on the initial concentration of pyruvic acid. Strategic modifications, including optimal reactant ratios and efficient mutant ME, significantly enhanced L-MA synthesis from CO2, providing a promising approach to the biotransformation process.

Homogeneous and Heterogeneous Frustrated Lewis Pairs for the Activation and Transformation of CO2

Due to the serious ecological problems caused by the high CO2 content in the atmosphere, reducing atmospheric CO2 has attracted widespread attention from academia and governments. Among the many ways to mitigate CO2 concentration, the capture and comprehensive utilization of CO2 through chemical methods have obvious advantages, whose key is to develop suitable adsorbents and catalysts. Frustrated Lewis pairs (FLPs) are known to bind CO2 through the interaction between unquenched Lewis acid sites/Lewis base sites with the O/C of CO2, simultaneously achieving CO2 capture and activation, which render FLP better potential for CO2 utilization. However, how to construct efficient FLP targeted for CO2 utilization and the mechanism of CO2 activation have not been systematically reported. This review firstly provides a comprehensive summary of the recent advances in the field of CO2 capture, activation, and transformation with the help of FLP, including the construction of homogeneous and heterogeneous FLPs, their interaction with CO2, reaction activity, and mechanism study. We also illustrated the challenges and opportunities faced in this field to shed light on the prospective research.

Engineering Frustrated Lewis Pair Active Sites in Porous Organic Scaffolds for Catalytic CO2 Hydrogenation

Frustrated Lewis pairs (FLPs), featuring reactive combinations of Lewis acids and Lewis bases, have been utilized for myriad metal-free homogeneous catalytic processes. Immobilizing the active Lewis sites to a solid support, especially to porous scaffolds, has shown great potential to ameliorate FLP catalysis by circumventing some of its inherent drawbacks, such as poor product separation and catalyst recyclability. Nevertheless, designing immobilized Lewis pair active sites (LPASs) is challenging due to the requirement of placing the donor and acceptor centers in appropriate geometric arrangements while maintaining the necessary chemical environment to perform catalysis, and clear design rules have not yet been established. In this work, we formulate simple guidelines to build highly active LPASs for direct catalytic hydrogenation of CO2 through a large-scale screening of a diverse library of 25,000 immobilized FLPs. The library is built by introducing boron-containing acidic sites in the vicinity of the existing basic nitrogen sites of the organic linkers of metal-organic frameworks collected in a "top-down" fashion from the CoRE MOF 2019 database. The chemical and geometrical appropriateness of these LPASs for CO2 hydrogenation is determined by evaluating a series of simple descriptors representing the intrinsic strength (acidity and basicity) of the components and their spatial arrangement in the active sites. Analysis of the leading candidates enables the formulation of pragmatic and experimentally relevant design principles which constitute the starting point for further exploration of FLP-based catalysts for the reduction of CO2.

Potential of Molecular Catalysts with Electron-Rich Transition Metal Centers for Addressing Long-Standing Chemistry Enigmas

Molecular complexes with electron-rich metal centers are highlighted as potential catalysts for the following five important chemical transformations: selective conversion of methane to methanol, capture and utilization of carbon dioxide, fixation of molecular nitrogen, water splitting, and recycling of perfluorochemicals. Our initial focus lies on negatively charged metal centers and ligands that can stabilize anionic metal atoms. Catalysts with electron-rich metal atoms (CERMAs) can sustain catalytic cycles with a "ping-pong" mechanism, where one or more electrons are transferred from the metal center to the substrate and back. The donated electrons can activate the chemical bonds of the substrate by populating its antibonding orbitals. At the last step of the catalytic cycle, the electrons return to the metal and the product interacts only weakly with the formed anion, which enables the solvent molecules to remove the product fast from the catalytic cycle and prevent subsequent unfavorable reactions. This process resembles electrocatalysis, but the metal serves as both an anode and a cathode (molecular electrocatalysis). We also analyze the usage of CERMAs as the base of Frustrated Lewis pairs proposing a new type of bimetallic catalysts. This Featured Article aspires to initiate systematic experimental and theoretical studies on CERMAs and their reactivity, the potential of which has probably been underestimated in the literature.

Atropisomeric Carboxylic Acids Synthesis via Nickel-Catalyzed Enantioconvergent Carboxylation of Aza-Biaryl Triflates with CO2

Upgrading CO2 to value-added chiral molecules via catalytic asymmetric C-C bond formation is a highly important yet challenging task. Although great progress on the formation of centrally chiral carboxylic acids has been achieved, catalytic construction of axially chiral carboxylic acids with CO2 has never been reported to date. Herein, we report the first catalytic asymmetric synthesis of axially chiral carboxylic acids with CO2, which is enabled by nickel-catalyzed dynamic kinetic asymmetric reductive carboxylation of racemic aza-biaryl triflates. A variety of important axially chiral carboxylic acids, which are valuable but difficult to obtain via catalysis, are generated in an enantioconvergent version. This new methodology features good functional group tolerance, easy to scale-up, facile transformation and avoids cumbersome steps, handling organometallic reagents and using stoichiometric chiral materials. Mechanistic investigations indicate a dynamic kinetic asymmetric transformation process induced by chiral nickel catalysis.

Visible Light Photoredox-Catalyzed Formyl/Carboxylation of Activated Alkenes with Glyoxylic Acid Acetals and CO2

A photoredox-catalyzed sequential α-formyl/carboxylation of alkenes with glyoxylic acid acetals and CO2 has been developed to afford a range of masked γ-formyl esters in good yields, which could be readily transformed into diverse compounds, such as γ-formyl ester, hemiacetal, and 1,4-diol. This reaction features mild conditions, readily available starting materials, and operational simplicity.

Ruthenium Single Atomic Sites Surrounding the Support Pit with Exceptional Photocatalytic Activity

Single-metal atomic sites and vacancies can accelerate the transfer of photogenerated electrons and enhance photocatalytic performance in photocatalysis. In this study, a series of nickel hydroxide nanoboards (Ni(OH)x NBs) with different loadings of single-atomic Ru sites (w-SA-Ru/Ni(OH)x) were synthesized via a photoreduction strategy. In such catalysts, single-atomic Ru sites are anchored to the vacancies surrounding the pits. Notably, the SA-Ru/Ni(OH)x with 0.60 wt % Ru loading (0.60-SA-Ru/Ni(OH)x) exhibits the highest catalytic performance (27.6 mmol g-1 h-1) during the photocatalytic reduction of CO2 (CO2RR). Either superfluous (0.64 wt %, 18.9 mmol g-1 h-1; 3.35 wt %, 9.4 mmol-1 h-1) or scarce (0.06 wt %, 15.8 mmol g-1 h-1; 0.29 wt %, 21.95 mmol g-1 h-1; 0.58 wt %, 23.4 mmol g-1 h-1) of Ru sites have negative effect on its catalytic properties. Density functional theory (DFT) calculations combined with experimental results revealed that CO2 can be adsorbed in the pits; single-atomic Ru sites can help with the conversion of as-adsorbed CO2 and lower the energy of *COOH formation accelerating the reaction; the excessive single-atomic Ru sites occupy vacancies that retard the completion of CO2RR.

Co(II)-N4 Catalysts for the Coupling of CO2 with Epoxides into Cyclic Carbonates: Catalytic Activity, Computational and Kinetic Studies

In this study, we synthesized and characterized a series of cobalt(II) complexes bearing linear tetradentate N4 ligands. These Co(II)-N4 complexes proved to be efficient catalysts for the cycloaddition reaction between carbon dioxide and epoxides even at room temperature and 1 bar pressure of carbon dioxide without the need for solvents or cocatalysts. Furthermore, when combined with (triphenylphosphoranylidene)ammonium chloride (PPNCl) as a cocatalyst, the Co-N4 catalysts exhibited an impressive turnover frequency of up to 41,000 h-1 for coupling of epichlorohydrin/CO2. These Co(II)-N4 catalysts were found to have excellent stability and reusability, retaining their catalytic activity after they were recycled seven times. Density functional theory (DFT) calculations provided a comprehensive mechanism for the cycloaddition reaction, indicating that the rate-determining step is the epoxide ring opening, in both the presence and absence of PPNCl. Further kinetic studies allow us to determine the activation parameters (ΔH‡, ΔS‡, and ΔG‡ at 25 °C) of the coupling reaction using the Eyring equation. The Gibbs free activation energy obtained from the kinetic studies was in close agreement with that of the DFT calculations. The substituent effect on the cycloaddition reaction of CO2 with various substituted styrene oxides was also examined for the first time.

Density Functional Theory Study of the Mechanism of Ni-Catalyzed Carboxylation of Aryl C(sp2)-S Bonds with CO2: Computational Evidence for the Multifaceted Role of Additive Zn

The mechanism of Ni-catalyzed carboxylation of aryl C(sp2)-S bonds with CO2 was studied for the first time by density functional theory calculations. We first proposed another possible reaction pathway in which CO2 insertion occurs prior to reduction. Then, we performed calculations on all proposed reaction pathways, and our calculation results show that the pathway in which reduction occurs prior to CO2 insertion is the favored pathway for this reaction. Additionally, our calculations disclose that additive Zn0 acts in multifaceted roles. (1) Zn0 acts as a reductant to reduce the NiI and NiII intermediates. (2) The simultaneously formed ZnIIBr2 can undergo transmetalation with NiI or NiII intermediates to produce an aryl reservoir by forming arylzinc species. (3) ZnIIBr2 can also coordinate to the CO2 to lower the energy barrier of the CO2 insertion step. Moreover, the calculation results suggest that CO2 insertion is the rate-determining step of the reaction, and CO2 is easier to insert into the NiI-Ph bond rather than into the NiII-Ph bond. These calculation results can improve our understanding of the mechanism of the carboxylation process and the multifaceted roles of metal additive Zn0 and provide theoretical guidance for improving the carboxylation reaction.

Reactions of Heteroallenes with Salan-based Ti(IV) Complexes: A Joint Experimental and Computational Study

The reaction of Ti(NMe2)4 with the salan ligand precursor H2N2O2H2 led to the formation of [(L*)Ti(NHMe2)2] (L*=N2O2 4-) that forms [(H2N2O2)TiCl2] upon reaction with two equiv. of Me3SiCl. [(L*)Ti(py)2] was obtained from the reaction of [Ti(NtBu)Cl2(py)3] with the sodium salt H2N2O2Na2. Treatment of [(L*)Ti(NHMe2)2] with two equiv. of tBuNCO led to the insertion of the isocyanate molecules into the Ti-Nsalan bonds with the formation of [{L*(N(tBu)CO)2}Ti]. Conversely, the reaction of [(H2N2O2)Ti(OiPr)2] with two equiv. of tBuNCO led to the insertion of one isocyanate molecule into a Ti-Nsalan bond with the formation of [{(HN2O2)(N(tBu)CO)}Ti(OiPr)]. Computational studies were performed to gain insight into the reactivity of isocyanates with salan-based Ti(IV) complexes.

Recent trends in incorporation of CO2 into organosulfur compounds via C-S bond cleavage

Desulfurative functionalization of organosulfur compounds to form various carbon-carbon and carbon-heteroatom bonds has become established as a powerful tool in organic chemistry. In this context, desulfurative carboxylation of this class of compounds using carbon dioxide (CO2) as a sustainable and renewable source of carboxyl has recently been developed as an efficient option for the synthesis of carboxylic acid derivatives. The aim of this Focus Review is to summarize the major progress in this appealing research field with particular emphasis on the mechanistic features of the reactions. Literature has been surveyed until the end of February 2024, according to the data collected using SciFinder and Google Scholar engines.

Zinc-Catalyzed Hydroboration of Carbon Dioxide Amplified by Borane-Tethered Heteroscorpionate Bis(Pyrazolyl)methane Ligands

The borane-functionalized (BR2) bis(3,5-dimethylpyrazolyl)methane (LH) ligands 1a (BR2: 9-borabicyclo[3.3.1]nonane or 9-BBN), 1b (BR2: BCy2), and 1c (BR2: B(C6F5)2) were synthesized by the allylation-hydroboration of LH. Metalation of 1a,b with ZnCl2 yielded the heteroscorpionate dichloride complexes [(1a,b)ZnCl2] 3a,b. The reaction of 1a with ZnEt2 led to the formation of the zwitterionic complex [Et(1a)ZnEt(THF)] 5. The reaction of complex 3a with two equivalents of KHBEt3 under a carbon dioxide (CO2) atmosphere gave rise to the formation of the dimeric bis(formate) complex [(1a)Zn(OCHO)2]2 8, in which its borane moieties intermolecularly stabilize the formate ligands of opposite metal centers. The allylated precursor Lallyl and its zinc dichloride, diethyl and bis(formate) complexes [(Lallyl)ZnCl2] 2, [(Lallyl)ZnEt2] 4, and [(Lallyl)Zn(OCHO)2] 7 were also isolated. The catalyst systems composed of 1 mol % of 3a or 3b and two equivalents of KHBEt3 hydroborated CO2 at 1 bar with pinacolborane (HBPin) to the methanol-level product H3COBPin (and PinBOBPin) in yields of 42 or 86%, respectively. The catalyst systems using the unfunctionalized complex [(LH)ZnCl2] 6 and KHBEt3 or KHBEt3/nOctBR2 (BR2: 9-BBN or BCy2) hydroborated CO2 to H3COBPin but in 2.5- to 6-fold lower activities than those exhibited by 3a,b/KHBEt3. The hydroboration of CO2 using 8 as a catalyst led to yields of 39-43%, comparable to those obtained with 3a/KHBEt3. The results confirmed that the catalytic intermediates benefit from the incorporated boranes' intra- or intermolecular stabilizations.

DFT Study of Functional Reduction of CO2 with BH3NMe3: The Real Role of Organic Catalyst TBD

The detailed mechanism of transition metal-free-catalyzed monomethylation of 2-naphthyl acetonitrile (1a) with CO2 in the presence of triazabicyclodecene (TBD) and BH3NMe3 was investigated using density functional theory. The C-methylation process proved to generate formaldehyde followed by the formation of the product via an alcohol rather than a methoxyborane intermediate. During the reaction, CO2 is activated to form the TBD-CO2 adduct and BH3NMe3 is changed into TBD-BH2 (IM2) in the presence of TBD. IM2 plays a real reducing role within the system due to the unique coordination capability of the B atom. In addition to enhancing the nucleophilicity of 1a through deprotonation by tBuOK, our research also indicates that the generated tBuOH not only assists in proton transfer to generate an alcohol intermediate but also promotes the regeneration of TBD.

Novel high-pressure/high-temperature reactor cell for in situ and operando x-ray absorption spectroscopy studies of heterogeneous catalysts at synchrotron facilities

This paper presents the development of a novel high-pressure/high-temperature reactor cell dedicated to the characterization of catalysts using synchrotron x-ray absorption spectroscopy under operando conditions. The design of the vitreous carbon reactor allows its use as a plug-flow reactor, monitoring catalyst samples in a powder form with a continuous gas flow at high-temperature (up to 1000 °C) and under high pressure (up to 1000 bar) conditions, depending on the gas environment. The high-pressure/high-temperature reactor cell incorporates an automated gas distribution system and offers the capability to operate in both transmission and fluorescence detection modes. The operando x-ray absorption spectroscopy results obtained on a bimetallic InCo catalyst during CO2 hydrogenation reaction at 300 °C and 50 bar are presented, replicating the conditions of a conventional microreactor. The complete setup is available for users and permanently installed on the Collaborating Research Groups French Absorption spectroscopy beamline in Material and Environmental (CRG-FAME) sciences and French Absorption spectroscopy beamline in Material and Environmental sciences at ultra-high dilution (FAME-UHD) beamlines (BM30 and BM16) at the European Synchrotron Radiation Facility in Grenoble, France.

The untold story of starch as a catalyst for organic reactions

Starch is one of the members of the polysaccharide family. This biopolymer has shown many potential applications in different fields such as catalytic reactions, water treatment, packaging, and food industries. In recent years, using starch as a catalyst has attracted much attention. From a catalytic point of view, starch can be used in organic chemistry reactions as a catalyst or catalyst support. Reports show that as a catalyst, simple starch can promote many heterocyclic compound reactions. On the other hand, functionalized starch is not only capable of advancing the synthesis of heterocycles but also is a good candidate catalyst for other reactions including oxidation and coupling reactions. This review tries to provide a fair survey of published organic reactions which include using starch as a catalyst or a part of the main catalyst. Therefore, the other types of starch applications are not the subject of this review.

Borohydride Ionic Liquids as Reductants of CO2 in the Selective N-formylation of Amines

Borohydride imidazolium ionic liquids, [IL]BH4, used for the first time as reductants in the N-formylation of various amines with CO2, provided an excellent yield of formamides. Under the same conditions, 5 bar CO2 and 80 °C, NaBH4 produced a mixture of N-formylated and N-methylated products in a ratio of 1 : 2. An alternative approach, based on the addition of halide imidazolium salts ([IL]Cl or [IL]Br) to the reactions of amine with NaBH4 and CO2, resulted in a significant increase of selectivity to formamide. However, no effect was noted for [IL]BF4 and [IL]PF6. Monitoring the reaction course in time using 1H NMR brought about new insight into the role of BH3 in the reduction of CO2 and the functionalization of amines. The formation of N-methylaniline - borane intermediate was evidenced.

Sustainable Copolymer Synthesis from Carbon Dioxide and Butadiene

Carbon dioxide (CO2) has long been recognized as an ideal C1 feedstock comonomer for producing sustainable materials because it is renewable, abundant, and cost-effective. However, activating CO2 presents a significant challenge because it is highly oxidized and stable. A CO2/butadiene-derived δ-valerolactone (EVP), generated via palladium-catalyzed telomerization between CO2 and butadiene, has emerged as an attractive intermediate for producing sustainable copolymers from CO2 and butadiene. Owing to the presence of two active carbon-carbon double bonds and a lactone unit, EVP serves as a versatile intermediate for creating sustainable copolymers with a CO2 content of up to 29 wt % (33 mol %). In this Review, advances in the synthesis of copolymers from CO2 and butadiene with divergent structures through various polymerization protocols have been summarized. Achievements made in homo- and copolymerization of EVP or its derivatives are comprehensively reviewed, while the postmodification of the obtained copolymers to access new polymers are also discussed. Meanwhile, potential applications of the obtained copolymers are also discussed. The literature references were sorted into sections based on polymerization strategies and mechanisms, facilitating readers in gaining a comprehensive view of the present chemistry landscape and inspiring innovative approaches to synthesizing novel CO2-derived copolymers.

Functional and Degradable Polyester-co-polyethers from CO2, Butadiene, and Epoxides

Carbon dioxide (CO2), as a renewable and nontoxic C1 feedstock, has been recognized as an ideal comonomer to prepare sustainable materials. In this regard, substantial focus has been dedicated to the ring-opening copolymerization of CO2 and epoxides, which results in the creation of aliphatic polycarbonates in most cases. Here, we report an unprecedented strategy to synthesize functional and degradable polyester-co-polyethers from CO2, butadiene, and epoxides via a CO2/butadiene-derived δ-valerolactone intermediate (EVP). Utilizing a chromium salen complex as the catalyst, the copolymerization of EVP and epoxides was successfully achieved to produce CO2/butadiene/epoxide terpolymers. The obtained polyester-co-polyethers with varied 39-93 mol % EVP content (equal to 18-28 wt % CO2 incorporation) show high thermal stability, tunable glass-transition temperatures, on-demand functionality, and good chemical degradability. This method extends the potential to access functional CO2-based polymers.

Polyarene Oxides with Tunable Quinone Units for Photocatalytic CO2 Reduction: A Simple Strategy toward Effective and Selective Catalysts

The photocatalytic transformation of carbon dioxide (CO2) into valuable chemicals is a challenging process that requires effective and selective catalysts. However, most polymer-based photocatalysts with electron donor-acceptor (D-A) structures are synthesized with a fixed D-A ratio by using expensive monomers. Herein, we report a simple strategy to prepare polyarene oxides (PAOs) with quinone structural units via oxidation treatment of polyarene (PA). The resultant PAOs show tunable D-A structures and electronic band positions depending on the degree of oxidation, which can catalyze the photoreduction of CO2 with water under visible light irradiation, generating CO as the sole carbonaceous product without H2 generation. Especially, the PAO with an oxygen content of 17.6% afforded the highest CO production rate of 161.9 μmol g-1 h-1. It is verified that the redox transformation between quinone and phenolic hydroxyl in PAOs achieves CO2 photoreduction coupled with water oxidation. This study provides a facile way to access conjugated polymers with a tunable D-A structure and demonstrates that the resultant PAOs are promising photocatalysts for CO2 reduction.

Copper Single Atoms Chelated on Ligand-Modified Carbon for Ullmann-type C-O Coupling

Cross-coupling reactions are of great importance in chemistry due to their ability to facilitate the construction of complex organic molecules. Among these reactions, the Ullmann-type C-O coupling between phenols and aryl halides is particularly noteworthy and useful for preparing diarylethers. However, this reaction typically relies on homogeneous catalysts that rapidly deactivate under harsh reaction conditions. In this study, we introduce a novel heterogeneous catalyst for the Ullmann-type C-O coupling reaction, comprised of isolated Cu atoms chelated to a tetraethylenepentamine-pyrrole ligand that is immobilized on graphite nanoplatelets. The catalytic study reveals the recyclability of the material, and demonstrates the crucial role of the pyrrole linker in stabilizing the Cu sites. The work expands the potential of single-atom catalyst nanoarchitectures and underscores the significance of ligands in stabilizing metals in cationic forms, providing a novel, tailored catalyst for cross-coupling chemistries.

Photocatalytic Multicomponent Annulation of Amide-Anchored 1,7-Diynes Enabled by Deconstruction of Bromotrichloromethane

We present the first example of visible-light-mediated multicomponent annulation of 1,7-diynes by taking advantage of quadruple cleavage olf carbon-halogen bonds of BrCCl3 to generate a C1 synthon, which was adeptly applied to the preparation of skeletally diverse 3-benzoyl-quinolin-2(1H)-one acetates in moderate to good yields. Controlled experiments demonstrated that H2O acted as both oxygen and hydrogen sources, and gem-dichlorovinyl carbonyl compound exhibited as a critical intermediate in this process. The mechanistic pathway involves Kharasch-type addition/6-exo-dig cyclization/1,5-(SN")-substitution/elimination/binucleophilic 1,6-addition/proton transfer/tautomerization sequence.

Catalytic Regio- and Enantioselective Boracarboxylation of Arylalkenes with CO2 and Diboron

Catalytic asymmetric carboxylation of readily available alkenes with CO2, an abundant and sustainable one-carbon building block, that gives access to value-added α-stereogenic carboxylic acids in an atom- and step-economic manner is highly attractive. However, it has remained a formidable challenge for the synthetic community. Here, the first example of Cu-catalyzed highly regio- and enantioselective boracarboxylation reaction on various arylalkenes with diboron under an atmospheric pressure of CO2 is described, which afforded a variety of chiral β-boron-functionalized α-aryl carboxylic acids with up to 87% yield and 97% ee under mild conditions. Importantly, α-substituted arylalkenes could also be subject to this protocol with excellent enantiopurities, thereby rendering an efficient approach for the generation of enantioenriched carboxylic acids with an α-chiral all-carbon quaternary center. Moreover, high functional group tolerance, scalable synthesis, and facile access to bioactive compounds, like (-)-scopolamine, (-)-anisodamine, and (-)-tropicamide, further demonstrated the synthetic utility of this strategy.

Cu-Catalyzed Asymmetric Dicarboxylation of 1,3-Dienes with CO2

Dicarboxylic acids and derivatives are important building blocks in organic synthesis, biochemistry, and the polymer industry. Although catalytic dicarboxylation with CO2 represents a straightforward and sustainable route to dicarboxylic acids, it is still highly challenging and limited to generation of achiral or racemic dicarboxylic acids. To date, catalytic asymmetric dicarboxylation with CO2 to give chiral dicarboxylic acids has not been reported. Herein, we report the first asymmetric dicarboxylation of 1,3-dienes with CO2 via Cu catalysis. This strategy provides an efficient and environmentally benign route to chiral dicarboxylic acids with high regio-, chemo-, and enantioselectivities. The copper self-relay catalysis, that is, Cu-catalyzed boracarboxylation of 1,3-dienes to give carboxylated allyl boronic ester intermediates and subsequent carboxylation of C-B bonds to give dicarboxylates, is key to the success of this dicarboxylation. Moreover, this protocol exhibits broad substrate scope, good functional group tolerance, easy product derivatizations, and facile synthesis of chiral liquid crystalline polyester and drug-like scaffolds.

Reactivity of NHI-Stabilized Heavier Tetrylenes towards CO2 and N2 O

A heteroleptic amino(imino)stannylene (TMS2 N)(It BuN)Sn: (TMS=trimethylsilyl, It Bu=C[(N-t Bu)CH]2 ) as well as two homoleptic NHI-stabilized tetrylenes, (It BuN)2 E: (NHI=N-heterocyclic imine, E=Ge, Sn) are presented. VT-NMR investigations of (It BuN)2 Sn: (2) reveal an equilibrium between the monomeric stannylene at room temperature and the dimeric form at -80 °C as well as in the solid state. Upon reaction of the homoleptic tetrylenes with CO2 , both compounds insert two equivalents of CO2 , however differing bonding modes can be observed. (It BuN)2 Sn: (2) inserts one equivalent of CO2 into each Sn-N bond, giving carbamato groups coordinated κ2 O,O' to the metal center. With (It BuN)2 Ge: (3), the Ge-N bonds stay intact upon activation, being bridged by one molecule of CO2 respectively, forming 4-membered rings. Furthermore, the reactivity of 2 towards N2 O was investigated, resulting in partial oxidation to form stannylene dimer [((It BuN)3 SnO)(It BuN)Sn:]2 (6).

Salophen chromium(iii) complexes functionalized with pyridinium salts as catalysts for carbon dioxide cycloaddition to epoxides

The catalytic properties of a series of novel chromium(iii) salophen complexes having different pyridinium chloride units (pyridinium, 2,6-dimethylpyridinium or 4-(dimethylamino)pyridinium ones) have been studied in the reaction of carbon dioxide cycloaddition to phenyl glycidyl ether. The examined complexes were found to be capable of catalyzing cycloaddition under relatively mild reaction conditions without any additional nucleophilic co-catalyst. However, their catalytic activity depended strongly on the structure and number of pyridinium salt units in the ligand molecule. The complex with a single unit of 4-(dimethylamino)pyridinium chloride turned out to be the most active among the examined ones. A TOF of up to 1480 h-1 was obtained in the presence of this catalyst under the following conditions: 120 °C, 2 h, 6 bar, 0.05 mol% (74% epoxide conversion, and >99% selectivity). The most active complex has also been examined as a catalyst in the reactions of CO2 with a series of ten other terminal epoxides. High catalytic activity (TOF = 220-5045 h-1) was observed in most cases, except for the reaction of CO2 with allyl glycidyl ether.

Thermochemical Properties of Synthesized Urea from Recovered Ammonia and Carbon Dioxide in Well-Ordered Nanospaces of Hollow Silica Spheres

The present work investigated the thermochemical properties of urea synthesized in well-ordered nanospaces of porous hollow silica spheres' shells from recovered ammonia and carbon dioxide in aqueous solution. Thermochemical behaviors of the urea synthesized in well-ordered nanospaces of the hollow spheres' shells prepared with 1-dodeclyamine were analyzed from the results of thermogravimetric analysis (TGA) and differential thermal analysis (DTA), and endothermic peaks assigned as the phase transition and decomposition were observed at ca. 440 and 514 K, respectively, which were higher than those of pristine urea (405 and 408 K, respectively), probably because of the nanoconfinement effect. The decomposition behavior was also confirmed by the result of diffuse reflectance infrared Fourier transform (DRIFT) spectra of the samples treated at various temperatures up to 573 K, and the decomposition of urea synthesized in the well-ordered nanospaces of the hollow spheres' shells started at 468 K and completed up to 533 K.

Electroreductive Ring-Opening Carboxylation of 1,3-Oxazolidin-2-ones with CO2 for Accessing β-Amino Acids

Electrocarboxylation of the C(sp3)-O bond in 1,3-oxazolidin-2-ones with CO2 to achieve β-amino acids is developed. The C-O bond in substrates can be selectively cleaved via the single electron transfer on the surface of a cathode or through a CO2• - intermediate under additive-free conditions. A great diversity of β-amino acids can be obtained in a moderate to excellent yield and readily converted to various biologically active compounds.

Visible-Light Photoredox-Catalyzed Intermolecular α-Aminomethyl/Carboxylative Dearomatization of Indoles with CO2 and α-Aminoalkyl Radical Precursors

Disclosed here is a visible-light photoredox-catalyzed intermolecular sequential α-aminomethyl/carboxylative dearomatization of indoles with CO2 and α-aminoalkyl radical precursors, affording a series of functionalized indoline-3-carboxylic acids and lactams in good yields with high regioselectivity. This multicomponent reaction provides a green and facile method for the synthesis of diverse functionalized indolines by using CO2 as the carboxylic and carbonyl source.

A review on high-pressure heterogeneous catalytic processes for gas-phase CO2 valorization

This review discusses the importance of mitigating CO2 emissions by valorizing CO2 through high-pressure catalytic processes. It focuses on various key processes, including CO2 methanation, reverse water-gas shift, methane dry reforming, methanol, and dimethyl ether synthesis, emphasizing pros and cons of high-pressure operation. CO2 methanation, methanol synthesis, and dimethyl ether synthesis reactions are thermodynamically favored under high-pressure conditions. However, in the case of methane dry reforming and reverse water-gas shift, applying high pressure, results in decreased selectivity toward desired products and an increase in coke production, which can be detrimental to both the catalyst and the reaction system. Nevertheless, high-pressure utilization proves industrially advantageous for cost reduction when these processes are integrated with Fischer-Tropsch or methanol synthesis units. This review also compiles recent advances in heterogeneous catalysts design for high-pressure applications. By examining the impact of pressure on CO2 valorization and the state of the art, this work contributes to improving scientific understanding and optimizing these processes for sustainable CO2 management, as well as addressing challenges in high-pressure CO2 valorization that are crucial for industrial scaling-up. This includes the development of cost-effective and robust reactor materials and the development of low-cost catalysts that yield improved selectivity and long-term stability under realistic working environments.

Application of Fluorescent Carbon Dots as Catalysts for the Ring-Opening Reaction of Epoxides

Considering the increased anthropogenic emissions of CO2 into the atmosphere, it is important to develop economic incentives for the use of CO2 capture methodologies. The conversion of CO2 into heterocyclic carbonates shows significant potential. However, there is a need for suitable organocatalysts to reach the required efficiency for these reactions. Given this, there has been an increasing focus on the development of organocatalytic systems consisting of a nucleophile and a hydrogen bond donor (HBD) so that CO2 conversion can occur in ambient conditions. In this work, we evaluated the potential of fluorescent carbon dots (CDs) as catalytic HBDs in the ring-opening reaction of epoxides, which is typically the rate-limiting step of CO2 conversion reactions into heterocyclic carbonates. The obtained results demonstrated that the CDs had a relevant catalytic effect on the studied model reaction, with a rate constant of 0.2361 ± 0.008 h-1, a percentage of reactant conversion of 70.8%, and a rate constant enhancement of 32.2%. These results were better than the studied alternative molecular HBDs. Thus, this study demonstrated that CDs have the potential to be used as HBDs and employed in organocatalyzed CO2 conversion into value-added products.

C1 functionalization of imidazo heterocycles via carbon dioxide fixation

Utilizing CO2 as a one-carbon building block in the preparation of high-value chemical entities is a cornerstone of modern organic synthesis. Herein, we exemplify this strategy through a mild, one-pot methodology that gives rapid access to N-heteroaryl substituted 6-, 8- and 9-membered carbamates via CO2 fixation.

Carbon dioxide activation by discandium dioxide cations in the gas phase: a combined investigation of infrared photodissociation spectroscopy and DFT calculations

We present a combined computational and experimental study of CO2 activation at the Sc2O2+ metal oxide ion center in the gas phase. Density functional theory calculations on the structures of [Sc2O2(CO2)n]+ (n = 1-4) ion-molecule complexes reveal a typical end-on binding motif as well as bidentate and tridentate carbonate-containing configurations. As the number of attached CO2 molecules increases, activated forms tend to dominate the isomeric populations. Distortion energies are unveiled to account for the conversion barriers from molecularly bound isomers to carbonate structures, and show a monotonically decreasing trend with successive CO2 ligand addition. The infrared photodissociation spectra of target ion-molecule complexes were recorded in the 2100-2500 cm-1 frequency region and interpreted by comparison with simulated IR spectra of low-lying isomers representing distinct configurations, demonstrating a high possibility of carbonate structure formation in current experiments.

Advances in Group VI Metal-Catalyzed Homogeneous Hydrogenation and Dehydrogenation Reactions

Transition metal-catalyzed homogeneous hydrogenation and dehydrogenation reactions for attaining plethora of organic scaffolds have evolved as a key domain of research in academia and industry. These protocols are atom-economic, greener, in line with the goal of sustainability, eventually pave the way for numerous novel environmentally benign methodologies. Appealing progress has been achieved in the realm of homogeneous catalysis utilizing noble metals. Owing to their high cost, less abundance along with toxicity issues led the scientific community to search for sustainable alternatives. In this context, earth- abundant base metals have gained substantial attention culminating enormous progress in recent years, predominantly with pincer-type complexes of nickel, cobalt, iron, and manganese. In this regard, group VI chromium, molybdenum and tungsten complexes have been overlooked and remain underdeveloped despite their earth-abundance and bio-compatibility. This review delineates a comprehensive overview in the arena of homogeneously catalysed (de)hydrogenation reactions using group VI base metals chromium, molybdenum, and tungsten till date. Various reactions have been described; hydrogenation, transfer hydrogenation, dehydrogenation, acceptorless dehydrogenative coupling, hydrogen auto transfer, along with their scope and brief mechanistic insights.

Copper iodide nanoparticles supported on modified graphene-based nanocomposite catalyzed CO2 conversion into oxazolidinone derivatives

We report on the preparation of copper iodide nanoparticles (NPs) immobilized on vitamin B3-modified graphene (CuI/GO-VB) nanocomposite and its application for the synthesis of oxazolidinone compounds using a remarkable carboxylative cyclization method via the reaction of arylacetylene, aldehyde and benzylamine derivatives under an atmospheric pressure of CO2 gas. The CuI/GO-VB catalyst was prepared from graphene oxide (GO), vitamin B3 (VB) and CuI using a two-step procedure; firstly graphene-based composite (GO-VB) was synthesized by the reaction of GO and nicotinoyl chloride, followed by the immobilization of CuI NPs on GO-VB. The CuI/GO-VB nanocomposite was fully identified with X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), inductively coupled plasma optical emission spectroscopy (ICP-OES), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). The catalytic performance of the CuI/GO-VB heterogeneous catalyst was investigated in carboxylative cyclization for the synthesis of oxazolidinone compounds under an atmospheric pressure of CO2 gas at 100οC in solvent-, base-, and additive-free conditions; the corresponding oxazolidinone compounds were obtained in 79-94% yield. The hot filtration results indicated that CuI/GO-VB nanocomposite was a heterogeneous catalyst and showed a good reusability for 5 runs without a significant decrease in its catalytic performance.

Bis(N-Heterocyclic Carbene) Manganese(I) Complexes in Catalytic N-Formylation/N-Methylation of Amines Using Carbon Dioxide and Phenylsilane

A series of six Mn(I) complexes with general formula [MnBr(bisNHC)(CO)3 ], having a bidentate bis(N-heterocyclic carbene) ligand (bisNHC), has been developed by varying the bridging group between the NHC donors, the nitrogen wingtip substituents and the heterocyclic ring. The synthesis of the complexes has been accomplished by in situ transmetalation of the bisNHC from the corresponding silver(I) complexes. Removal of the bromide anion affords the corresponding solvento complexes [Mn(bisNHC)(CO)3 (CH3 CN)](BF4 ). The influence of the bisNHC structure on its electron donor ability has been evaluated by FTIR and 13 C NMR spectroscopy, both in the neutral and cationic complexes. Finally, the isolated Mn(I)-bisNHC complexes have been employed as homogeneous catalysts in the reductive N-formylation and N-methylation of amines with CO2 as C1 source and phenylsilane as reducing agent, showing a high selectivity for the N-methylated product. Preliminary mechanistic investigations suggest that, in the adopted reaction conditions, the formylated product can be formed via different reaction pathways, either metal-catalyzed or not, while the methylation reaction requires the use of the Mn(I) catalyst.

Hydroxy-Rich Covalent Organic Framework for the Efficient Catalysis of the Cycloaddition of CO2

The cycloaddition of CO2 with epoxides to cyclic carbonates is one of the most promising and green pathways for CO2 utilization, and the development of highly efficient catalysts remains a challenge. In this work, a novel hydroxy-rich covalent organic framework (TFPB-DHBD-COF) was synthesized, and it served as an efficient heterogeneous catalyst for the reaction of CO2 with 1,2-epoxybutane under mild conditions, providing the desired products in 90% conversion. The abundant hydroxy groups in the pore channels of TFPB-DHBD-COF could not only activate epoxides and CO2 via hydrogen bonding but also obviously enhance its stability through intramolecular five-membered ring hydrogen bonding. Thus, this COF also exhibited outstanding stability and tolerance for diverse substrates. Undoubtedly, this work has enriched the application of tailored COFs in the activation and utilization of CO2.

Direct access to carbamates via acylation of arylamines with dialkyl azodicarboxylates under metal-free conditions

A novel C-N coupling of various arylamines with dialkyl azodicarboxylates under metal-free conditions for the rapid assembly of carbamates has been achieved. This established protocol features mild reaction conditions, simple operation, broad substrate scope, moderate to excellent yields and good tolerance of functional groups. Moreover, the potential synthetic utility of products was exemplified by a series of intriguing chemical operations.

Straightforward synthesis of functionalized γ-Lactams using impure CO2 stream as the carbon source

Direct utilization of CO2 into organic synthesis finds enormous applications to synthesize pharmaceuticals and fine chemicals. However, pure CO2 gas is essential to achieve these transformations, and the purification of CO2 is highly cost and energy intensive. Considering this, we describe a straightforward synthetic route for the synthesis of γ-lactams, a pivotal core structure of bioactive molecules, by using commercially available starting materials (alkenes and amines) and impure CO2 stream (exhaust gas is collected from the car) as the carbon source. This blueprint features a broad scope, excellent functional group compatibility and application to the late-stage transformation of existing pharmaceuticals and natural products to synthesize functionalized γ-lactams. We believe that our strategy will provide direct access to γ-lactams in a very sustainable way and will also enhance the Carbon Capture and Utilization (CCU) strategy.

Nickel-Catalyzed Reductive Allylation of Aldehydes with Allylic Alcohols in the Presence of CO2

CO2-assisted and Ni-catalyzed direct reductive allylation of aldehydes utilizing allylic alcohols as allylic precursor has been reported. Various homoallyl alcohols could be synthesized in excellent yield with enhanced regioselectivity and stereoselectivity for alkyl- and aryl-substituted aldehydes under mild conditions. For different substrates, proper collocation of the catalytic precursor and ligand is crucial. Preliminary mechanistic studies supported the reaction pathway through a sequential allyl hydrocarbonate formation/allylnickelation/coordination insertion process by the Ni(I)/Ni(III) catalytic cycle, which has been proven by cyclic voltammetry analysis.

Catalysis Conversion of Carbon Dioxide and Epoxides by Tetrahydroxydiboron To Prepare Cyclic Carbonates

A binary catalytic system comprising tetrahydroxydiboron and tetrabutylammonium iodide (TBAI) was used to catalyze the cycloaddition of carbon dioxide (CO2) with epoxides. The tetrahydroxydiboron catalyst (9 mol %), in combination with the use of TBAI (13.5 mol %) as a nucleophile, is capable of catalyzing the cycloaddition of CO2 with various terminal epoxides under room temperature and a CO2 balloon. In addition, a range of internal epoxides, including sterically hindered bicyclic epoxides and vegetable oil-based epoxides, were suitable for the catalytic system, affording a series of cyclic carbonates in moderate to high yields. The tetrahydroxydiboron/TBAI cooperative catalytic mechanism was elucidated using Fourier transform infrared spectroscopy, nuclear magnetic resonance, and electrospray ionization-high-resolution mass spectrometry. Results reveal that the tetrahydroxydiboron catalyst exhibits dual effects, activating both CO2 and epoxides; initially, it underwent the insertion of CO2 to form a boron-CO2 adduct and subsequently activated the epoxides through interaction of the B-O bond.

Halogen Bonding in the Decoration of Secondary Coordination Sphere of Zinc(II) and Cadmium(II) Complexes: Catalytic Application in Cycloaddition Reaction of CO2 with Epoxides

Three new zinc(II) complexes [Zn(H2L3)2(H2O)3] (Zn2), [Zn(H3L2a)(H2O)3]n (Zn3) (H3L2a = 2,4-diiodo-5-(2-(2,4,6-trioxotetrahydropyrimidin-5(2H)-ylidene)hydrazineyl)isophthalate) and [Zn(HL4)(DMF)(H2O)]n (Zn4) were synthesized by the reaction of Zn(II) salts with 5-(2-(2,4-dioxopentan-3-ylidene)hydrazineyl) isophthalic acid (H3L3), 2,4,6-triiodo-5-(2-(2,4,6-trioxotetrahydropyrimidin-5(2H)-ylidene)hydrazineyl) isophthalic acid (H5L2) (in the presence of NH2OH·HCl) and 5-(2-(2,4-dioxopentan-3-ylidene)hydrazineyl)-2,4,6-triiodoisophthalic acid (H3L4), respectively. According to the X-ray structural analysis, the intramolecular resonance-assisted hydrogen bond ring remains intact, with N···O distances of 2.562(5) and 2.573(5) Å in Zn2, 2.603(6) Å in Zn3, and 2.563(8) Å in Zn4. In the crystal packing of Zn3, the cooperation of I···O and I···I types of halogen bonds between tectons leads to a one-dimensional supramolecular polymer, while I···O interactions aggregate 1D chains of coordination polymer Zn4. These new complexes (Zn2, Zn3, and Zn4) and known [Zn(H3L1)(H2O)2]n (Zn1) (H3L1 = 5-(2-(2,4,6-trioxotetrahydropyrimidin-5(2H)-ylidene) hydrazineyl)isophthalate), {[Zn(H3L1)(H2O)3]·3H2O}n (Zn5), [Cd(H3L1)(H2O)2]n (Cd1), {[Cd(HL3)(H2O)2(DMF)]·H2O}n (Cd2), [Cd(H3L3)]n (Cd-3), {[Cd2(μ-H2O)2(μ-H2L4)2(H2L4)2]·2H2O}n (Cd4), and {[Cd(H3L1)(H2O)3]·4H2O}n (Cd5) were tested as catalysts in the cycloaddition reaction of CO2 with epoxides in the presence of tetrabutylammonium halides as the cocatalyst. The halogen-bonded catalyst Zn4 is the most efficient one in the presence of tetrabutylammonium bromide by affording a high yield (85-99%) of cyclic carbonates under solvent-free conditions after 48 h at 40 bar and 80 °C.

Base-mediated carboxylation of C-nucleophiles with CO2

Carbon dioxide (CO2) is an available, abundant, and renewable C1 resource, which could be converted into value-added chemicals. Due to its inherent thermodynamic stability and kinetic inertness, it is difficult to realize its efficient utilization. Nevertheless, many elegant strategies for the utilization of CO2 have been developed using Lewis bases, frustrated Lewis pairs, hydroxyl-containing compounds, amino-group-containing compounds or transition metal catalysis. Among them, base-mediated carboxylation of C-nucleophiles is an environmentally friendly strategy for CO2 conversion, which is operationally simple, using low-toxicity bases and economical available promoters, without the use of complex ligands or cocatalysts. This review summarizes related work on the base-mediated carboxylation of C-nucleophiles with CO2, based on the effects of nucleophiles, promoters, additives, and solvents. The types of pronucleophile are categorized as follows: hydrocarbon with C(sp3)-H, C(sp2)-H or C(sp)-H bonds, organosilanes, organotin, organoboron, and N-tosylhydrazones. Typical mechanisms and applications of these carboxylation reactions are also depicted. Moreover, mechanistic comprehension of CO2 activation and conversion at a molecular level aims to further expand the repertoire of carboxylation transformations mediated by bases.

Donor-Acceptor Activation of Carbon Dioxide

The activation and functionalization of carbon dioxide entails great interest related to its abundance, low toxicity and associated environmental problems. However, the inertness of CO2 has posed a challenge towards its efficient conversion to added-value products. In this review we discuss one of the strategies that have been widely used to capture and activate carbon dioxide, namely the use of donor-acceptor interactions by partnering a Lewis acidic and a Lewis basic fragment. This type of CO2 activation resembles that found in metalloenzymes, whose outstanding performance in catalytically transforming carbon dioxide encourages further bioinspired research. We have divided this review into three general sections based on the nature of the active sites: metal-free examples (mainly formed by frustrated Lewis pairs), main group-transition metal combinations, and transition metal heterobimetallic complexes. Overall, we discuss one hundred compounds that cooperatively activate carbon dioxide by donor-acceptor interactions, revealing a wide range of structural motifs.

A supported pyridylimine-cobalt catalyst for N-formylation of amines using CO2

N-Formylation of amines with CO2 as a cheap and non-toxic C1-feedstock and hydrosilane reducing agent is a practical and environment friendly method to synthesize formamides. This study describes an efficient and chemoselective mono-N-formylation of amines using CO2 and phenylsilane under mild conditions using a porous metal-organic framework (MOF)-supported single-site cobalt catalyst (pyrim-UiO-Co). The pyrim-UiO-Co MOF has a UiO-topology, and its organic linkers bear a pyridylimine ligated Co catalytic moiety. A wide range of aliphatic and aromatic amines are transformed into desired N-formamides in moderate to excellent yields under 1-5 bar CO2. Pyrim-UiO-Co is tolerant to various functional groups and could be recycled and reused at least 10 times. Mechanistic investigation using kinetic, spectroscopic and density functional theory studies suggests that the formylation of benzylamine proceeds sequentially via oxidative addition of PhSiH3 and CO2 insertion, followed by a turn-over limiting reaction with an amine. Our work highlights the importance of MOF-based Earth-abundant metal catalysts for the practical and eco-friendly synthesis of fine chemicals using cheap feedstocks.

Recent progress in reductive carboxylation of C-O bonds with CO2

Transformation of carbon dioxide (CO2) into value-added organic compounds has attracted increasing interest of scientific community in the last few decades, not only because CO2 is the primary greenhouse gas that drives global climate change and ocean acidification, but also because it has been regarded as a plentiful, nontoxic, nonflammable and renewable one-carbon (C1) feedstock. Among the various CO2-conversion processes, carboxylation reactions represent one of the most beautiful and attractive research topics in the field, since it offers the possibility for the construction of synthetically and biologically important carboxylic acids from various easily accessible (pseudo)halides, organosilicon, and organoboron compounds. The purpose of this review is to summarize the available literature on deoxygenative carboxylation of alcohols and their derivatives utilizing CO2 as a carboxylative reagent. Depending on the C-O compounds employed, the paper is divided into five major sections. The direct dehydroxylative carboxylation of free alcohols is discussed first. This is followed by reductive carboxylation of carboxylates, triflates, and tosylates. In the final section, the only reported example on catalytic carboxylation of fluorosulfates will be covered. Notably, special attention has been paid on the mechanistic aspects of the reactions that may provide new insights into catalyst improvement and development, which currently mainly relies on the use of transition metal catalysts.