Ultra-high open-circuit voltage of tin perovskite solar cells via an electron transporting layer design

Certified high-efficiency "large-area" perovskite solar module for Fresnel lens-based concentrated photovoltaics

The future of energy generation is well in tune with the critical needs of the global economy, leading to more green innovations and emissions-abatement technologies. Introducing concentrated photovoltaics (CPVs) is one of the most promising technologies owing to its high photo-conversion efficiency. Although most researchers use silicon and cadmium telluride for CPV, we investigate the potential in nascent technologies, such as perovskite solar cell (PSC). This work constitutes a preliminary investigation into a "large-area" PSC module under a Fresnel lens (FL) with a "refractive optical concentrator-silicon-on-glass" base to minimize the PV performance and scalability trade-off concerning the PSCs. The FL-PSC system measured the solar current-voltage characteristics in variable lens-to-cell distances and illuminations. The PSC module temperature was systematically studied using the COMSOL transient heat transfer mechanism. The FL-based technique for "large-area" PSC architectures is a promising technology that further facilitates the potential for commercialization.

A Review on the Progress, Challenges, and Performances of Tin-Based Perovskite Solar Cells

In this twenty-first century, energy shortages have become a global issue as energy demand is growing at an astounding rate while the energy supply from fossil fuels is depleting. Thus, the urge to develop sustainable renewable energy to replace fossil fuels is significant to prevent energy shortages. Solar energy is the most promising, accessible, renewable, clean, and sustainable substitute for fossil fuels. Third-generation (3G) emerging solar cell technologies have been popular in the research field as there are many possibilities to be explored. Among the 3G solar cell technologies, perovskite solar cells (PSCs) are the most rapidly developing technology, making them suitable for generating electricity efficiently with low production costs. However, the toxicity of Pb in organic-inorganic metal halide PSCs has inherent shortcomings, which will lead to environmental contamination and public health problems. Therefore, developing a lead-free perovskite solar cell is necessary to ensure human health and a pollution-free environment. This review paper summarized numerous types of Sn-based perovskites with important achievements in experimental-based studies to date.

Environmental and health risks of perovskite solar modules: Case for better test standards and risk mitigation solutions

Perovskite solar cells (PSCs) promise high efficiencies and low manufacturing costs. Most formulations, however, contain lead, which raises health and environmental concerns. In this review, we use a risk assessment approach to identify and evaluate the technology risks to the environment and human health. We analyze the risks by following the technology from production to transportation to installation to disposal and examine existing environmental and safety regulations in each context. We review published data from leaching and air emissions testing and highlight gaps in current knowledge and a need for more standardization. Methods to avoid lead release through introduction of absorbing materials or use of alternative PSC formulations are reviewed. We conclude with the recommendation to develop recycling programs for PSCs and further standardized testing to understand risks related to leaching and fires.

Remarkable Stability and Optoelectronic Properties of an All-Inorganic CsSn0.5Ge0.5I3 Perovskite Solar Cell

Sn-Ge mixed perovskites have been proposed as promising lead-free candidates in the photovoltaics (PV) field. In this work, we discovered a stable P1 phase Sn-Ge mixed structure (CsSn_0.5Ge_0.5I₃) with an appropriate band gap value of 1.19 eV, which manifests its unique structural stability and physics properties. The thermodynamic stability of this mixed structure under different growth conditions and all possible native defects are depicted in detail. The formation energies and dominant native point defects indicate that P1 phase CsSn_0.5Ge_0.5I₃ exhibits unipolar self-doping behavior (p-type conductivity) and good defect tolerance while the growth condition changes. In addition, the calculation of light absorption confirmed that the P1 phase has a higher light absorption coefficient than that of MAPbI₃ in the visible light range, showing excellent light absorption. Our work not only provides theoretical guidance for unraveling the unusual structural stability of Sn-Ge mixed perovskites, but also offers a useful scheme to modulate the stability and optoelectronic properties of Ge-based perovskites through alloy engineering.

A Universal Surface Treatment for p-i-n Perovskite Solar Cells

Perovskite interfaces critically influence the final performance of the photovoltaic devices. Optimizing them by reducing the defect densities or improving the contact with the charge transporting material is key to further enhance the efficiency and stability of perovskite solar cells. Inverted (p-i-n) devices can particularly benefit here, as evident from various successful attempts. However, every reported strategy is adapted to specific cell structures and compositions, affecting their robustness and applicability by other researchers. In this work, we present the universality of perovskite top surface post-treatment with ethylenediammonium diiodide (EDAI₂) for p-i-n devices. To prove it, we compare devices bearing perovskite films of different composition, i.e., Sn-, Pb-, and mixed Sn-Pb-based devices, achieving efficiencies of up to 11.4, 22.0, and 22.9%, respectively. A careful optimization of the EDAI₂ thickness indicates a different tolerance for Pb- and Sn-based devices. The main benefit of this treatment is evident in the open-circuit voltage, with enhancements of up to 200 mV for some compositions. In addition, we prove that this treatment can be successfully applied by both wet (spin-coating) and dry (thermal evaporation) methods, regardless of the composition. The versatility of this treatment makes it highly appealing for industrial application, as it can be easily adapted to specific processing requirements. We present a detailed experimental protocol, aiming to provide the community with an easy, universal perovskite post-treatment method for reliably improving the device efficiency, highlighting the potential of interfaces for the field.

Stirring-Time Control Approach to Manage Colloid Nucleation Size for the Fabrication of High-Performance Sn-Based Perovskite Solar Cells

Colloidal nucleation is first observed to exist in a Sn-based perovskite solution, and its components and size are discovered to alter in real time with stirring time. Then, a simple stirring-time control approach is developed to manage the size of the colloids, and with continuous stirring for 3 days an optimal colloid with size <10 nm is confirmed to successfully form a continuous, dense, high-quality perovskite film. Herein, the colloids exist in the form of [SnI₆]^4- complete coordination compounds, with which a compact FA_0.75MA_0.25SnI₃ perovskite film with reduced defects and enhanced crystallinity concentration is obtained as nucleation sites, and a planar inverted perovskite solar cell with a champion power conversion efficiency of 10.74% is eventually realized. This work provides a novel perspective to enhance perovskite film quality and thus device performance via controlling high-quality nucleation in precursor solution.

Engineering Stable Lead-Free Tin Halide Perovskite Solar Cells: Lessons from Materials Chemistry

Substituting toxic lead with tin (Sn) in perovskite solar cells (PSCs) is the most promising route toward the development of high-efficiency lead-free devices. Despite the encouraging efficiencies of Sn-PSCs, they are still yet to surpass 15% and suffer detrimental oxidation of Sn(II) to Sn(IV). Since their first application in 2014, investigations into the properties of Sn-PSCs have contributed to a growing understanding of the mechanisms, both detrimental and complementary to their stability. This review summarizes the evolution of Sn-PSCs, including early developments to the latest state-of-the-art approaches benefitting the stability of devices. The degradation pathways associated with Sn-PSCs are first outlined, followed by describing how composition engineering (A, B site modifications), additive engineering (oxidation prevention), and interface engineering (passivation strategies) can be employed as different avenues to improve the stability of devices. The knowledge about these properties is also not limited to PSCs and also applicable to other types of devices now employing Sn-based perovskite absorber layers. A detailed analysis of the properties and materials chemistry reveals a clear set of design rules for the development of stable Sn-PSCs. Applying the design strategies highlighted in this review will be essential to further improve both the efficiency and stability of Sn-PSCs.

Vapor-Deposited Amino Coupling of Hybrid Perovskite Single Crystals and Silicon Wafers toward Highly Efficient Multiwavelength Photodetection

The complementary integration of perovskite single crystals (PSCs) and silicon-based circuitry provides a feasible way to combine their superiority toward efficient multiwavelength photodetection and imaging readout; however, it suffers from distinct lattice mismatch as well as the ambiguous coupling interface effect. Herein, we develop a vacuum-assisted vapor deposition strategy to realize an ultrauniform aminosiloxane interface-modified silicon wafer, which enables the monolithic epitaxial growth of PSCs with the highest mechanical coupling strength up to 340,000 N m^-2 achieved so far. According to the molecular coupling engineering development with different aminosiloxanes, we achieve a highly efficient multiwavelength-responsive integrated photodetector, possessing specific photodetectivity values of 4.36 × 10¹² jones and 4.55 × 10¹¹ jones within the visible and NIR regions, respectively, as well as the lowest X-ray detection limit of 42.6 nGy_air s^-1. Moreover, a particularly wide -3dB cut-off frequency of 6350 Hz as well as a 120 dB linear dynamic range (LDR) also endows the integrated device with excellent dynamic photodetection capability. This work provides an efficacious approach in the integration technology for PSC-based optoelectronic applications.

Sn-Based Perovskite Halides for Electronic Devices

Because of its less toxicity and electronic structure analogous to that of lead, tin halide perovskite (THP) is currently one of the most favorable candidates as an active layer for optoelectronic and electric devices such as solar cells, photodiodes, and field-effect transistors (FETs). Promising photovoltaics and FETs performances have been recently demonstrated because of their desirable electrical and optical properties. Nevertheless, THP's easy oxidation from Sn2+ to Sn4+ , easy formation of tin vacancy, uncontrollable film morphology and crystallinity, and interface instability severely impede its widespread application. This review paper aims to provide a basic understanding of THP as a semiconductor by highlighting the physical structure, energy band structure, electrical properties, and doping mechanisms. Additionally, the key chemical instability issues of THPs are discussed, which are identified as the potential bottleneck for further device development. Based on the understanding of the THPs properties, the key recent progress of THP-based solar cells and FETs is briefly discussed. To conclude, current challenges and perspective opportunities are highlighted.

Dopamine Hydrochloride-Assisted Synergistic Modulation of Perovskite Crystallization and Sn2+ Oxidation for Efficient and Stable Lead-free Solar Cells

Tin perovskites have received great concern in solar cell research owing to their favorable optoelectronic performance and environmental friendliness. However, due to their poor crystallization and easy oxidation, the performance improvement for tin-based perovskite solar cells (TPSCs) is rather challenging. Herein, reductive 3-hydroxytyramine hydrochloride (DACl) with NH₂·HCl and phenol groups as co-additives with SnF₂ is added into the precursor to modulate perovskite crystallization and inhibit Sn²⁺ oxidation for high-performance TPSCs. The Lewis base group of NH₂ HCl in DACl could bind to perovskite lattices to modulate the crystallization with suppressed defects in the bulk and grain boundary, whereas reductive phenol groups effectively constrain the Sn²⁺ oxidation. Moreover, the undissociated DACl decreases the supersaturated concentration of tin perovskite solution and creates a pre-nucleation site for rapid nucleation to further regulate crystallization. Consequently, the DACl-derived TPSCs achieve a high power-conversion efficiency (PCE) that reaches up to 11%. More impressively, the device remains at 84% of the initial PCE after full-sun illumination in N₂ over 600 h without being encapsulated. This DACl-based synergistic modulation of a lead-free perovskite demonstrates a feasible approach using one molecule with different functional groups to manipulate crystallization, Sn²⁺ oxidation, and defect reparation of tin perovskite films, providing a critical guideline for constructing high-quality perovskites by multifunctional additives with high photovoltaic performance.

Multidentate Chelation Heals Structural Imperfections for Minimized Recombination Loss in Lead-Free Perovskite Solar Cells

Tin-based perovskite solar cells (Sn-PSCs) have emerged as promising environmentally viable photovoltaic technologies, but still suffer from severe non-radiative recombination loss due to the presence of abundant deep-level defects in the perovskite film and under-optimized carrier dynamics throughout the device. Herein, we healed the structural imperfections of Sn perovskites in an "inside-out" manner by incorporating a new class of biocompatible chelating agent with multidentate claws, namely, 2-Guanidinoacetic acid (GAA), which passivated a variety of deep-level Sn-related and I-related defects, cooperatively reinforced the passivation efficacy, released the lattice strain, improved the structural toughness, and promoted the carrier transport of Sn perovskites. Encouragingly, an efficiency of 13.7 % with a small voltage deficit of ≈0.47 V has been achieved for the GAA-modified Sn-PSCs. GAA modification also extended the lifespan of Sn-PSCs over 1200 hours.

Mitigating Voc Loss in Tin Perovskite Solar Cells via Simultaneous Suppression of Bulk and Interface Nonradiative Recombination

Tin-based perovskite solar cells (PSCs) have recently attracted extensive attention as a promising alternative to lead-based counterparts due to their low toxicity and narrow band gap. However, the severe open-circuit voltage (V_oc) loss remains one of the most significant obstacles to further improving photovoltaic performance. Herein, we report an effective approach to reducing the V_oc loss of tin-based PSCs. We find that introducing ethylammonium bromide (EABr) as an additive into the tin perovskite film can effectively reduce defect density both in the tin perovskite film and at the surface as well as optimize the energy level alignment between the perovskite layer and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) transport material, thereby suppressing nonradiative recombination both in the bulk film and at the interface. Furthermore, it is demonstrated that the V_oc loss is gradually mitigated along with increasing storage duration due to the slow passivation effect. As a result, a remarkable V_oc of 0.83 V is achieved in the devices optimized with the EABr additive, which shows a significantly improved power conversion efficiency (PCE) of 10.80% and good stability.

Coevaporation Stabilizes Tin-Based Perovskites in a Single Sn-Oxidation State

Chemically processed methylammonium tin-triiodide (CH₃NH₃SnI₃) films include Sn in different oxidation states, leading to poor stability and low power conversion efficiency of the resulting solar cells (PSCs). The development of absorbers with Sn [2+] only has been identified as one of the critical steps to develop all Sn-based devices. Here, we report on coevaporation of CH₃NH₃I and SnI₂ to obtain absorbers with Sn being only in the preferred oxidation state [+2] as confirmed by X-ray photoelectron spectroscopy. The Sn [4+]-free absorbers exhibit smooth highly crystalline surfaces and photoluminescence measurements corroborating their excellent optoelectronic properties. The films show very good stability under heat and light. Photoluminescence quantum yields up to 4 × 10^-3 translate in a quasi Fermi-level splittings exceeding 850 meV under one sun equivalent conditions showing high promise in developing lead-free, high efficiency, and stable PSCs.

Polishing the Lead-Poor Surface for Efficient Inverted CsPbI3 Perovskite Solar Cells

Triiodide cesium lead perovskite (CsPbI₃ ) has promising prospects in the development of efficient and stable photovoltaics in both single-junction and tandem structures. However, achieving inverted devices that provide good stability and are compatible to tandem devices remains a challenge, and the deep insights are still not understood. This study finds that the surface components of CsPbI₃ are intrinsically lead-poor and the relevant traps are of p-type with localized states. These deep-energy-level p traps induce inferior transfer or electrons and serious nonradiative recombination at the CsPbI₃ /PCBM interface, leading to the considerable open-circuit voltage (V_oc ) loss and reduction of fill factor (FF). Compared to molecular passivation, polishing treatment with 1,4-butanediamine can eliminate the nonstoichiometric components and root these intrinsically lead-poor traps for superior electron transfer. The polishing treatment significantly improves the FF and V_oc of the inverted CsPbI₃ photovoltaics, creating an efficiency promotion from 12.64% to 19.84%. Moreover, 95% of the initial efficiency of the optimized devices is maintained after the output operation for 1000 h.

Life on the Urbach Edge

The Urbach energy is an expression of the static and dynamic disorder in a semiconductor and is directly accessible via optical characterization techniques. The strength of this metric is that it elegantly captures the optoelectronic performance potential of a semiconductor in a single number. For solar cells, the Urbach energy is found to be predictive of a material's minimal open-circuit-voltage deficit. Performance calculations considering the Urbach energy give more realistic power conversion efficiency limits than from classical Shockley-Queisser considerations. The Urbach energy is often also found to correlate well with the Stokes shift and (inversely) with the carrier mobility of a semiconductor. Here, we discuss key features, underlying physics, measurement techniques, and implications for device fabrication, underlining the utility of this metric.

Physics of defects in metal halide perovskites

Metal halide perovskites are widely used in optoelectronic devices, including solar cells, photodetectors, and light-emitting diodes. Defects in this class of low-temperature solution-processed semiconductors play significant roles in the optoelectronic properties and performance of devices based on these semiconductors. Investigating the defect properties provides not only insight into the origin of the outstanding performance of perovskite optoelectronic devices but also guidance for further improvement of performance. Defects in perovskites have been intensely studied. Here, we review the progress in defect-related physics and techniques for perovskites. We survey the theoretical and computational results of the origin and properties of defects in perovskites. The underlying mechanisms, functions, advantages, and limitations of trap state characterization techniques are discussed. We introduce the effect of defects on the performance of perovskite optoelectronic devices, followed by a discussion of the mechanism of defect treatment. Finally, we summarize and present key challenges and opportunities of defects and their role in the further development of perovskite optoelectronic devices.

Indent-Free Vapor-Assisted Surface Passivation Strategy toward Tin Halide Perovskite Solar Cells

Sn halide perovskite solar cells (PKSCs) are the most promising competitors to conventional lead PKSCs. Nevertheless, defects at the surfaces and grain boundaries hinder the improvement of the PKSCs' performance. Liquid surface passivation on the perovskite layer is commonly used to decrease these defects. In the case of tin perovskite solar cells, the liquid passivation improved the open-circuit voltage (V_oc). However, this decreased the short-circuit current density (J_sc). We found that this J_sc loss is brought about by the thickness loss after the liquid passivation because tin perovskite layers are partially soluble in common solvents, and the calculated impact pressure was up to 155.4 kPa. Here, we introduce new vapor passivation including solvent and passivation molecules and report efficiency enhancement without decreasing J_sc. The vapor-passivated film showed longer time-resolved photoluminescence decay, smoother morphology, and lower defect densities. Most importantly, the vapor passivation method significantly enhanced the efficiency from 9.41 to 11.29% with J_sc increasing from 22.82 to 24.05 mA·cm^-2. On the contrary, the corresponding liquid passivation method gave an efficiency of 10.90% with a decreased J_sc from 22.82 to 22.38 mA·cm^-2. A commonly used and simple indent-free surface passivation strategy is proposed to enhance the efficiency and stability of PKSCs.

High-throughput screening of stable and efficient double inorganic halide perovskite materials by DFT

Perovskite solar cells have become the most promising third-generation solar cells because of their superior physical–chemical properties and high photoelectric conversion efficiency. However, the current obstacles to commercialization of perovskite solar cells are their poor stability and harmful elements. How to find high-efficiency, high-stability and non-toxic perovskite materials from thousands of possible perovskite crystals is the key to solve this problem. In this paper, the inorganic halide double perovskite A₂BX₆ and its crystal structure are considered, and the data mining algorithm in informatics is introduced into the high-throughput computing data to analyze various elements in nature to study the perovskite materials that can meet the requirements of high performance. The photoelectric conversion properties and stability of 42 inorganic double perovskite materials are studied based on density functional theory (DFT). The results show that the tolerance factors of 39 crystals are between 0.8 and 1.10, indicating that these crystals have stable perovskite structure. In addition, the dielectric function, PDOS, elastic modulus, shear modulus and poison’s ratio of these crystals are analyzed. According to the above theoretical simulation results, three candidate materials for ideal light absorption are presented. This can provide a theoretical basis for the industrial application of perovskite solar cells.

Wavelength-Tuneable Near-Infrared Luminescence in Mixed Tin-Lead Halide Perovskites

Near-infrared light-emitting diodes (NIR-LEDs) are widely used in various applications such as night-vision devices, optical communication, biological imaging and optical diagnosis. The current solution-processed high-efficiency perovskite NIR-LEDs are typically based on CsPbI₃ and FAPbI₃ with emission peaks being limited in the range of 700–800 nm. NIR-LEDs with longer emission wavelengths near to 900 nm can be prepared by replacing Pb with Sn. However, Sn-based perovskite LEDs usually exhibit a low efficiency owing to the high concentration of Sn-related defects and the rapid oxidation of Sn²⁺ to Sn⁴⁺, which further induces the device degradation. These problems can be solved by rationally adjusting the ratio between Pb content with Sn. Mixed Sn-Pb halide perovskites with a smaller bandgap and superior stability than pure Sn-based perovskites are promising candidates for manufacturing next-generation NIR emitters. In this study, we systematically investigated the optical properties of a family of hybrid Sn and Pb iodide compounds. The emission spectra of the mixed Sn-Pb halide perovskites were tuned by changing the Sn:Pb ratio. Consequently, the peak emission wavelength red-shifted from 710 nm to longer than 950 nm. The absorption and photoluminescence emission properties associated with different compositions were compared, and the results demonstrated the potential of MA- and FA-based mixed Sn-Pb halide perovskites for preparing low-cost and efficient NIR-LEDs. In addition, we clarified the influence of cations on the bandgap bowing effect and electronic properties of mixed Sn-Pb halide perovskites.

Tin-based halide perovskite materials: properties and applications

Organic-inorganic hybrid halide perovskite materials have attracted considerable research interest, especially for photovoltaics. In addition, their scope has been extended towards light-emitting devices, photodetectors, or detectors. However, the toxicity of lead (Pb) element in perovskite compositions limits their applications. Therefore, a tremendous research effort on replacing is underway. More specifically, tin-based perovskites have shown the highest potential for this purpose. However, many challenges remain before these materials reach the goals of stability, safety, and eventually commercial application. This perspective considers many aspects and the critical development possibilities of tin-based perovskites, including drawbacks and challenges based on their physical properties. Additionally, it provides insights for future device applications that go beyond solar cells. Finally, the existing challenges and opportunities in tin-based perovskites are discussed.

High Open Circuit Voltage Over 1 V Achieved in Tin-Based Perovskite Solar Cells with a 2D/3D Vertical Heterojunction

2D-3D mixed tin halide perovskites are outstanding candidate materials for lead-free perovskite solar cells (PSCs) due to their improved stability and decreased trap density in comparison with their pure 3D counterparts. However, the mixture of multiple phases may lead to poor charge transfer across the films and limit the device efficiency. Here, a stacked quasi-2D (down)-3D (top) double-layered structure in perovskite films prepared via vacuum treatment is demonstrated, which can result in a planar bilayer heterojunction. In addition, it is found that the introduction of guanidinium thiocyanate (GuaSCN) additive can improve the crystallinity and carrier mobility in the 2D perovskite layer and passivate defects in the whole film, leading to a long carrier lifetime (>140 ns) in photoluminescence measurements. As a result, the PSCs show a high open circuit voltage (VOC ) up to 1.01 V with a voltage loss of only 0.39 V, which represents the record values ever reported for tin-based PSCs. The champion device exhibits a power conversion efficiency (PCE) of 13.79% with decent stability, retaining 90% of the initial PCE for 1200 h storage in N2 -filled glovebox.

Quasi-2D Bilayer Surface Passivation for High Efficiency Narrow Bandgap Perovskite Solar Cells

The combination of comprehensive surface passivation and effective interface carriers transfer plays a critical role in high-performance perovskite solar cells. A 2D structure is an important approach for surface passivation of perovskite film, however, its large band gap could compromise carrier transfer. Herein, we synthesize a new molecule 2-thiopheneethylamine thiocyanate (TEASCN) for the construction of bilayer quasi-2D structure precisely on a tin-lead mixed perovskite surface. This bilayer structure can passivate the perovskite surface and ensure effective carriers transfer simultaneously. As a result, the open-circuit voltage (V_oc ) of the device is increased without sacrificing short-circuit current density (J_sc ), giving rise to a high certified efficiency from a credible third-party certification of narrow band gap perovskite solar cells. Furthermore, theoretical simulation indicates that the inclusion of TEASCN makes the bilayer structure thermodynamically more stable, which provides a strategy to tailor the number of layers of quasi-2D perovskite structures.

A Selective Targeting Anchor Strategy Affords Efficient and Stable Ideal-Bandgap Perovskite Solar Cells

Mixed lead-tin perovskite solar cells (LTPSCs) with an ideal bandgap are demonstrated as a promising candidate to reach higher power conversion efficiency (PCE) than their Pb-counterparts. Herein, a Br-free mixed lead-tin perovskite material, FA_0.8 MA_0.2 Pb_0.8 Sn_0.2 I₃ , with a bandgap of 1.33 eV, as a perovskite absorber, is selected. Through density functional theory calculations and optoelectronic techniques, it is demonstrated that both Pb- and Sn-related A-site vacancies are pushed into deeper energetic depth, causing severe nonradiative recombination. Hence, a selective targeting anchor strategy that employs phenethylammonium iodide and ethylenediamine diiodide as co-modifiers to selectively anchor with Pb- and Sn-related active sites and passivate bimetallic traps, respectively, is established. Furthermore, the selectivity of the molecular oriented anchor passivation is demonstrated through energetic depth specificity of Pb- and Sn-related traps. As a result, a substantially enhanced open-circuit voltage (V_OC ) from 0.79 to 0.90 V for the LTPSCs is achieved, yielding a champion PCE of 22.51%, which is the highest PCE among the reported ideal-bandgap PSCs. The V_OC loss is reduced to 0.43 V.

Marked Efficiency Improvement of FAPb0.7Sn0.3Br3 Perovskite Light-Emitting Diodes by Optimization of the Light-Emitting Layer and Hole-Transport Layer

Highly luminescent FAPb0.7Sn0.3Br3 nanocrystals with an average photoluminescence (PL) quantum yield of 92% were synthesized by the ligand-assisted reprecipitation method. The 41-nm-thick perovskite film with a smooth surface and strong PL intensity was proven to be a suitable luminescent layer for perovskite light-emitting diodes (PeLEDs). Electrical tests indicate that the double hole-transport layers (HTLs) played an important role in improving the electrical-to-optical conversion efficiency of PeLEDs due to their cascade-like level alignment. The PeLED based on poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(4,40-(N-(p-butylphenyl))-diphenylamine)] (TFB)/poly(9-vinylcarbazole) (PVK) double HTLs produced a high external quantum efficiency (EQE) of 9%, which was improved by approximately 10.9 and 5.14 times when compared with single HTL PVK or the TFB device, respectively. The enhancement of the hole transmission capacity by TFB/PVK double HTLs was confirmed by the hole-only device and was responsible for the dramatic EQE improvement.

Synergistic Engineering of the Conductivity and Surface Properties of PEDOT:PSS-Based HTLs for Inverted Tin Perovskite Solar Cells to Achieve Efficiency over 10

A new simple environmentally benign water-soluble zwitterion, sulfamic acid (SA), was used as a multifunctional additive to tune the properties of PEDOT:PSS-based hole transporting layer (HTL). A layer of PEDOT:PSS was inserted in-between the ITO electrode and SA-modified PEDOT:PSS to form a pseudo bi-layered PS/SA@PS HTL to protect the ITO electrode from damage by more acidic SA@PS. Inverted tin-based perovskite solar cells based on the pseudo bi-layered PS/SA@PS HTLs achieved the highest efficiency of 10.5% with very small current hysteresis. The cell lost only 5% of the initial efficiency by storing in a glovebox without packing for more than 2000 h. The functions of SA include increasing the conductivity and mobility of the HTL to extract and transport the hole facilely by changing the conformation of PEDOT chains via zwitterion-induced charge screening, elevating the work function of PEDOT:PSS to match the VB of TPsk via increasing the PSS^- chains on the HTL surface, creating a more hydrophilic surface for depositing better quality tin perovskite film (TPsk with the chemical formula of FA_0.98EDA_0.01SnI₃), and avoiding the oxidation Sn²⁺ to Sn⁴⁺ via interacting with Sn²⁺ ions (at the HTL/absorber interface) using the sulfite group on SA, which were revealed with various physicochemical data.

Stretchable, Breathable, and Stable Lead-Free Perovskite/Polymer Nanofiber Composite for Hybrid Triboelectric and Piezoelectric Energy Harvesting

Halide-perovskite-based mechanical energy harvesters display excellent electrical output due to their unique ferroelectricity and dielectricity. However, their high toxicity and moisture sensitivity impede their practical applications. Herein, a stretchable, breathable, and stable nanofiber composite (LPPS-NFC) is fabricated through electrospinning of lead-free perovskite/poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) and styrene-ethylene-butylene-styrene (SEBS). The Cs₃ Bi₂ Br₉ perovskites serve as efficient electron acceptors and local nucleating agents for the crystallization of polymer chains, thereby enhancing the electron-trapping capacity and polar crystalline phase in LPPS-NFC. The excellent energy level matching between Cs₃ Bi₂ Br₉ and PVDF-HFP boosts the electron transfer efficiency and reduces the charge loss, thereby promoting the electron-trapping process. Consequently, this LPPS-NFC-based energy harvester displays an excellent electrical output (400 V, 1.63 µA cm^-2 , and 2.34 W m^-2 ), setting a record of the output voltage among halide-perovskite-based nanogenerators. The LPPS-NFC also exhibits excellent stretchability, waterproofness, and breathability, enabling the fabrication of robust wearable devices that convert mechanical energy from different biomechanical motions into electrical power to drive common electronic devices. The LPPS-NFC-based energy harvesters also endure extreme mechanical deformations (washing, folding, and crumpling) without performance degradation, and maintain stable electrical output up to 5 months, demonstrating their promising potential for use as smart textiles and wearable power sources.

Ordered Element Distributed C3 N Quantum Dots Manipulated Crystallization Kinetics for 2D CsPbI3 Solar Cells with Ultra-High Performance

Two-dimensional (2D) CsPbI₃ is developed to conquer the phase-stability problem of CsPbI₃ by introducing bulky organic cations to produce a steric hindrance effect. However, organic cations also inevitably increase the formation energy and difficulty in crystallization kinetics regulation. Such poor crystallization process modulation of 2D CsPbI₃ leads to disordered phase-arrangement, which impedes the transport of photo-generated carriers and worsens device performance. Herein, a type of C₃ N quantum dots (QDs) with ordered carbon and nitrogen atoms to manipulate the crystallization process of 2D CsPbI₃ for improving the crystallization pathway, phase-arrangement and morphology, is introduced. Combination analyses of theoretical simulation, morphology regulation and femtosecond transient absorption (fs-TA) characterization, show that the C₃ N QDs induce the formation of electron-rich regions to adsorb bulky organic cations and provide nucleation sites to realize a bi-directional crystallization process. Meanwhile, the quality of 2D CsPbI₃ film is improved with lower trap density, higher surface potential, and compact morphology. As a result, the power conversion efficiency (PCE) of the optimized device (n = 5) boosts to an ultra-high value of 15.63% with strengthened environmental stability. Moreover, the simple C₃ N QDs insertion method shows good universality to other bulky organic cations of Ruddlesden-Popper and Dion-Jacobson, providing a good modulation strategy for other optoelectronic devices.

Using Ligand Engineering to Produce Efficient and Stable Pb-Sn Perovskite Solar Cells with Antioxidative 2D Capping Layers

Pb-Sn binary halide perovskites are a promising photovoltaic material due to their low toxicity and optical absorption spectrum well matched to the solar spectrum. However, the ready oxidation of Sn²⁺ to Sn⁴⁺ makes the material system currently too unstable to commercialize. Herein, ligand engineering based on antioxidative tyramine (hydrochloride, TACl) is presented for the first time to increase the stability of this material system. Using this strategy, we generate a two-dimensional (2D) capping layer on top of a standard three-dimensional Pb-Sn film. After capping, the surface defects can be passivated and the TACl-based 2D perovskite effectively protected Sn²⁺ from oxidation, which stabilized the Sn-Pb perovskite composition, avoiding the Pb-based perovskite formation. It is further found that the TACl treatment suppressed the halide segregation and improved the perovskite film photostability. Cell efficiency increases from 16.25 to 18.28% and device lifetime (T₈₀) increases from less than 100 to over 1000 h. Our finding suggests that tuning ligand form/function represents a potentially highly productive direction to explore when trying to produce stable tin-based perovskite devices.

Understanding the PEDOT:PSS, PTAA and P3CT-X Hole-Transport-Layer-Based Inverted Perovskite Solar Cells

The power conversion efficiencies (PCEs) of metal-oxide-based regular perovskite solar cells have been higher than 25% for more than 2 years. Up to now, the PCEs of polymer-based inverted perovskite solar cells are widely lower than 23%. PEDOT:PSS thin films, modified PTAA thin films and P3CT thin films are widely used as the hole transport layer or hole modification layer of the highlyefficient inverted perovskite solar cells. Compared with regular perovskite solar cells, polymer-based inverted perovskite solar cells can be fabricated under relatively low temperatures. However, the intrinsic characteristics of carrier transportation in the two types of solar cells are different, which limits the photovoltaic performance of inverted perovskite solar cells. Thanks to the low activation energies for the formation of high-quality perovskite crystalline thin films, it is possible to manipulate the optoelectronic properties by controlling the crystal orientation with the different polymer-modified ITO/glass substrates. To achieve the higher PCE, the effects of polymer-modified ITO/glass substrates on the optoelectronic properties and the formation of perovskite crystalline thin films have to be completely understood simultaneously.

Fullerene Derivative with Flexible Alkyl Chain for Efficient Tin-Based Perovskite Solar Cells

Fullerene derivatives are considered excellent materials for the extraction and transportation of electrons in the production of efficient tin-based perovskite solar cells (TPSCs). However, it is not clear how the molecular structure of fullerene derivatives affects the efficiency and stability of TPSCs. In this study, the effects of fullerene derivatives, (6,6)-phenyl-C61-butyric acid hexyl ester (PCBH) and (6,6)-phenyl-C61-butyric acid methyl ester (PCBM), with different functional groups, on photovoltaic performance were investigated. The flexible alkyl chain of PCBH effectively improved the film morphology and stability, the electron extraction and transport capabilities, and the interface contact of fullerene and perovskite. As a result, the PCBH-based TPSC yielded a higher efficiency, of 9.21%, than the PCBM-based devices (7.54%). More importantly, the PCBH-based films exhibited higher stability and effectively suppressed the oxidation of Sn2+ by inhibiting oxygen permeation. Therefore, the PCBH-based devices exhibited significantly enhanced stability. This result indicates that optimizing the functional group of fullerene derivatives is crucial for improving the efficiency and stability of TPSCs.

High-Performance Tin-Lead Mixed-Perovskite Solar Cells with Vertical Compositional Gradient

Sn-Pb mixed perovskites with bandgaps in the range of 1.1-1.4 eV are ideal candidates for single-junction solar cells to approach the Shockley-Queisser limit. However, the efficiency and stability of Sn-Pb mixed-perovskite solar cells (PSCs) still lag far behind those of Pb-based counterparts due to the easy oxidation of Sn²⁺ . Here, a reducing agent 4-hydrazinobenzoic acid is introduced as an additive along with SnF₂ to suppress the oxidation of Sn²⁺ . Meanwhile, a vertical Pb/Sn compositional gradient is formed spontaneously after an antisolvent treatment due to different solubility and crystallization kinetics of Sn- and Pb-based perovskites and it can be finely tuned by controlling the antisolvent temperature. Because the band structure of a perovskite is dependent on its composition, graded vertical heterojunctions are constructed in the perovskite films with a compositional gradient, which can enhance photocarrier separation and suppress carrier recombination in the resultant PSCs. Under optimal fabrication conditions, the Sn-Pb mixed PSCs show power conversion efficiency up to 22% along with excellent stability during light soaking.

Energy Saving and Energy Generation Smart Window with Active Control and Antifreezing Functions

Windows are the least energy efficient part of the buildings, as building accounts for 40% of global energy consumption. Traditional smart windows can only regulate solar transmission, while all the solar energy on the window is wasted. Here, for the first time, the authors demonstrate an energy saving and energy generation integrated smart window (ESEG smart window) in a simple way by combining louver structure solar cell, thermotropic hydrogel, and indium tin oxides (ITO) glass. The ESEG smart window can achieve excellent optical properties with ≈90% luminous transmission and ≈54% solar modulation, which endows excellent energy saving performance. The outstanding photoelectric conversion efficiency (18.24%) of silicon solar cells with louver structure gives the smart window excellent energy generation ability, which is more than 100% higher than previously reported energy generation smart window. In addition, the solar cell can provide electricity to for ITO glass to turn the transmittance of hydrogel actively, as well as the effect of antifreezing. This work offers an insight into the design and preparation together with a disruptive strategy of easy fabrication, good uniformity, and scalability, which opens a new avenue to realize energy storage, energy saving, active control, and antifreezing integration in one device.

Tin Halide Perovskites: From Fundamental Properties to Solar Cells

Metal halide perovskites have unique optical and electrical properties, which make them an excellent class of materials for a broad spectrum of optoelectronic applications. However, it is with photovoltaic devices that this class of materials has reached the apotheosis of popularity. High power conversion efficiencies are achieved with lead-based compounds, which are toxic to the environment. Tin-based perovskites are the most promising alternative because of their bandgap close to the optimal value for photovoltaic applications, the strong optical absorption, and good charge carrier mobilities. Nevertheless, the low defect tolerance, the fast crystallization, and the oxidative instability of tin halide perovskites currently limit their efficiency. The aim of this review is to give a detailed overview of the crystallographic, photophysical, and optoelectronic properties of tin-based perovskite compounds in their multiple forms from 3D to low-dimensional structures. At the end, recent progress in tin-based perovskite solar cells are reviewed, mainly focusing on the detail of the strategies adopted to improve the device performances. For each subtopic, the current challenges and the outlook are discussed, with the aim to stimulate the community to address the most important issues in a concerted manner.

Research progress of ABX3-type lead-free perovskites for optoelectronic applications: materials and devices

We summarize the development and application of ABX3-type lead-free halide perovskite materials, especially in optoelectronic devices.

Core-Shell Structured Upconversion/Lead-Free Perovskite Nanoparticles for Anticounterfeiting Applications

In view of their excellent luminescence properties, nanocrystalline metal halide perovskites have diverse optoelectronic applications, including those related to anticounterfeiting. However, high-quality optical anticounterfeiting typically requires multiple encryptions relying on several optical modes to ensure information security. Herein, an efficient anticounterfeiting strategy based on dual optical encryption is realized by combining up- and downconversion luminescence in a nanocomposite with NaYF₄  : Er³⁺ ,Yb³⁺ as core and a CsMnCl₃ as shell. The emission color of this nanocomposite depends on the penetration depth of incident radiation and can be changed by varying the excitation source (980 nm laser or UV light) to produce different luminescent patterns. This feature allows one to effectively improve the anticounterfeiting index and fabricate professional anticounterfeiting materials.

In Situ Interfacial Passivation of Sn-Based Perovskite Films with a Bi-functional Ionic Salt for Enhanced Photovoltaic Performance

Environment-friendly Tin (Sn)-based perovskite solar cells (PSCs) have lately made significant development, showing tremendous promise in addressing the hazardous problems associated with Pb-based PSCs. However, even in N₂ atmospheres, the thermodynamic stability of Sn-based perovskite films and long-term stability of Sn-based PSCs are demonstrated to be poor due to the presence of interfacial defect trap states. Here, we demonstrate the post-treatment of Sn-based perovskite films with ethylenediamine formate (EDAFa₂) ion salt, serving as a bi-functional interface layer to in situ passivate the interfacial defect and improve the stability of Sn²⁺ by creating a thermodynamic chemical environment pathway. Moreover, the presence of EDAFa₂ is shown to promote the interfacial energy level alignment, which is beneficial for the charge extraction at the interface. As a result, PSC devices with a bi-functional interface achieve a champion power conversion efficiency (PCE) as high as 9.40% and enhanced stability, retaining ∼95% of the original PCE stored in a N₂ environment after ∼1960 h without encapsulation. This work highlights the significant role of an interfacial design in efficient and stable Sn-based PSCs.

Low-Bandgap Organic Bulk-Heterojunction Enabled Efficient and Flexible Perovskite Solar Cells

Lead halide perovskite and organic solar cells (PSCs and OSCs) are considered as the prime candidates currently for clean energy applications due to their solution and low-temperature processibility. Nevertheless, the substantial photon loss in near-infrared (NIR) region and relatively large photovoltage deficit need to be improved to enable their uses in high-performance solar cells. To mitigate these disadvantages, low-bandgap organic bulk-heterojunction (BHJ) layer into inverted PSCs to construct facile hybrid solar cells (HSCs) is integrated. By optimizing the BHJ components, an excellent power conversion efficiency (PCE) of 23.80%, with a decent open-circuit voltage (V_oc ) of 1.146 V and extended photoresponse over 950 nm for rigid HSCs is achieved. The resultant devices also exhibit superior long-term (over 1000 h) ambient- and photostability compared to those from single-component PSCs and OSCs. More importantly, a champion PCE of 21.73% and excellent mechanical durability can also be achieved in flexible HSCs, which is the highest efficiency reported for flexible solar cells to date. Taking advantage of these impressive device performances, flexible HSCs into a power source for wearable sensors to demonstrate real-time temperature monitoring are successfully integrated.

Design and Modelling of Eco-Friendly CH3NH3SnI3-Based Perovskite Solar Cells with Suitable Transport Layers

An ideal n-i-p perovskite solar cell employing a Pb free CH3NH3SnI3 absorber layer was suggested and modelled. A comparative study for different electron transport materials has been performed for three devices keeping CuO hole transport material (HTL) constant. SCAPS-1D numerical simulator is used to quantify the effects of amphoteric defect based on CH3NH3SnI3 absorber layer and the interface characteristics of both the electron transport layer (ETL) and hole transport layer (HTL). The study demonstrates that amphoteric defects in the absorber layer impact device performance significantly more than interface defects (IDL). The cell performed best at room temperature. Due to a reduction in Voc, PCE decreases with temperature. Defect tolerance limit for IL1 is 1013 cm−3, 1016 cm−3 and 1012 cm−3 for structures 1, 2 and 3 respectively. The defect tolerance limit for IL2 is 1014 cm−3. With the proposed device structure FTO/PCBM/CH3NH3SnI3/CuO shows the maximum efficiency of 25.45% (Voc = 0.97 V, Jsc = 35.19 mA/cm2, FF = 74.38%), for the structure FTO/TiO2/CH3NH3SnI3/CuO the best PCE is obtained 26.92% (Voc = 0.99 V, Jsc = 36.81 mA/cm2, FF = 73.80%) and device structure of FTO/WO3/CH3NH3SnI3/CuO gives the maximum efficiency 24.57% (Voc = 0.90 V, Jsc = 36.73 mA/cm2, FF = 74.93%) under optimum conditions. Compared to others, the FTO/TiO2/CH3NH3SnI3/CuO system provides better performance and better defect tolerance capacity.

Lead-Free Perovskite Single Crystals: A Brief Review

Lead-free perovskites have received remarkable attention because of their nontoxicity, low-cost fabrication, and spectacular properties including controlled bandgap, long diffusion length of charge carrier, large absorption coefficient, and high photoluminescence quantum yield. Compared with the widely investigated polycrystals, single crystals have advantages of lower trap densities, longer diffusion length of carrier, and extended absorption spectrum due to the lack of grain boundaries, which facilitates their potential in different fields including photodetectors, solar cells, X-ray detectors, light-emitting diodes, and so on. Therefore, numerous research focusing on the novel properties, preparation methods, and remarkable progress in applications of lead-free perovskite single crystals (LFPSCs) has been extensively studied. In this review, the current advancements of LFPSCs are briefly summarized, including the synthesis approaches, compositional and interfacial engineering, and stability of several representative systems of LFPSCs as well as the reported practical applications. Finally, the critical challenges which limit the performance of LFPSCs, and their inspiring prospects for further developments are also discussed.

Controlling Quantum-Well Width Distribution and Crystal Orientation in Two-Dimensional Tin Halide Perovskites via a Strong Interlayer Electrostatic Interaction

Two-dimensional (2D) tin halide perovskites have recently emerged as very promising materials for eco-friendly lead-free photovoltaic devices. However, the fine control of the bulky organic cations orderly embedding into the perovskite structure with a narrow quantum-well width distribution and favorable orientation is rather complicated. In this study, we proposed to introduce the F-substituted phenylethlammonium (PEA) cation (i.e., 4-fluorophenethylammonium FPEA) in 2D tin halide perovskite, which may mitigate phase polydispersity and crystal orientation, thus potentially increasing attainable charge-carrier mobility. A strong interlayer electrostatic attraction between electron-deficient F atoms and its adjacent phenyl rings aligns the crystal structure, working together with the validated dipole interaction. Therefore, the fluorination of organic cation leads to orderly self-assembly of solvated intermediates and promotes vertical crystal orientation. Furthermore, the interlayer electrostatic interaction serves as a supramolecular anchor to stabilize the 2D tin halide perovskite structure. Our work uncovers the effect of interlayer molecular interaction on efficiency and stability, which contributes to the development of stable and efficient low-toxicity perovskite solar cells.

Slow Passivation and Inverted Hysteresis for Hybrid Tin Perovskite Solar Cells Attaining 13.5% via Sequential Deposition

Herein, we report a sequential deposition procedure to passivate the surface of a hybrid mixed cationic tin perovskite (E1G20) with phenylhydrazinium thiocyanate (PHSCN) dissolved in trifluoroethanol solvent. The photoluminescence lifetime of the PHSCN film was enhanced by a factor of 6, while the charge-extraction rate from perovskite to C₆₀ layer was enhanced by a factor of 2.5, in comparison to those of the E1G20 film. A slow surface passivation was observed; the performance of the PHSCN device improved upon increasing the storage period to attain an efficiency of 13.5% for a current-voltage scan in the forward bias direction. An inverted effect of hysteresis was observed in that the efficiency of the forward scan was greater than that of the reverse scan. An ion-migration model as a result of the effect of the phenylhydrazinium surface passivation is proposed to account for the observed phenomena. The device was stable upon shelf storage in a glovebox for 3000 h.