Glucose-responsive insulin patch for the regulation of blood glucose in mice and minipigs

Baroreceptor-Inspired Microneedle Skin Patch for Pressure-Controlled Drug Release

Objective: We have developed a baroreceptor-inspired microneedle skin patch for pressure-controlled drug release. Impact Statement: This design is inspired by the skin baroreceptors, which are mechanosensitive elements of the peripheral nervous system. We adopt the finger touching to trigger the electric stimulation, ensuring a fast-response and user-friendly administration with potentially minimal off-target effects. Introduction: Chronic skin diseases bring about large, recurrent skin damage and often require convenient and timely transdermal treatment. Traditional methods lack spatiotemporal controllable dosage, leaving a risk of skin irritation or drug resistance issues. Methods: The patch consists of drug-containing microneedles and stretchable electrode array. The electrode array, integrated with the piezoconductive switch and flexible battery, provides a mild electric current only at the spot that is pressed. Drugs in microneedles will then flow along the current into the skin tissues. The stretchable feature also provides the mechanical robustness and electric stability of the device on large skin area. Results: This device delivers Cy3 dye in pig skin with spatiotemporally controlled dosage, showing ~8 times higher fluorescence intensity than the passive delivery. We also deliver insulin and observe the reduction of the blood glucose level in the mouse model upon pressing. Compared with passive delivery without pressing, the dosage of drugs released by the simulation is 2.83 times higher. Conclusion: This baroreceptor-inspired microneedle skin patch acts as a good example of the biomimicking microneedle device in the precise control of the drug release profile at the spatiotemporal resolution.

Advances in microneedles for transdermal diagnostics and sensing applications

Microneedles, the miniaturized needles, which can pierce the skin with minimal invasiveness open up new possibilities for constructing personalized Point-of-Care (POC) diagnostic platforms. Recent advances in microneedle-based POC diagnostic systems, especially their successful implementation with wearable technologies, enable biochemical detection and physiological recordings in a user-friendly manner. This review presents an overview of the current advances in microneedle-based sensor devices, with emphasis on the biological basis of transdermal sensing, fabrication, and application of different types of microneedles, and a summary of microneedle devices based on various sensing strategies. It concludes with the challenges and future prospects of this swiftly growing field. The aim is to present a critical and thorough analysis of the state-of-the-art development of transdermal diagnostics and sensing devices based on microneedles, and to bridge the gap between microneedle technology and pragmatic applications.

Dissolving microneedles for transdermal drug delivery in cancer immunotherapy

Immunotherapy is an important approach in cancer treatment. Transdermal administration is emerging as a promising method for delivering immunotherapeutics. Dissolving microneedles are made mainly of soluble or biodegradable polymers and have garnered widespread attention due to their painlessness, safety, convenience, excellent drug loading capacity, and easy availability of various materials, making them an ideal transdermal delivery system. This review comprehensively summarized the preparation methods, materials, and applications of dissolving microneedles in cancer vaccines, immune checkpoint inhibitors, and adoptive cell therapy. Additionally, the challenges and perspectives associated with their future clinical translation are discussed.

Dually crosslinked degradable polyionic micelles for sustained glucose-responsive insulin release

Glucose -sensitive delivery systems hold great promise as a therapeutic approach for high-incidence diabetes owing to their ability to release insulin whenever elevated glycemia is detected. However, they are unstable in a hyperglycemic environment, which leads to short-term sustained insulin release. Herein, we designed dually crosslinked insulin polyionic micelles (DCM@insulin) based on triblock polymers of o-glycol and phenylboronic acid-functionalized poly(ethylene glycol)-poly(dimethylamino carbonate)-poly(dimethylamino-trimethylene carbonate) (mPEG-P(AC-co-MPD)-PDMAC and mPEG-P(AC-co-MAPBA)-PDMATC, respectively) for sustained glucose-responsive insulin release. DCM@insulin with a phenylboronic acid ester structure (first crosslinking structure) enhanced glycemic responsiveness by regulating insulin release in a hyperglycemic environment. Additionally, the UV-crosslinking structure (second crosslinking structure) formed by the residual double bonds in AC units endowed DCM@insulin with the ability to effectively protect the loaded insulin against protease degradation and avoid burst release under multiple insulin release. The in vivo findings demonstrated that DCM@insulin effectively maintained glycemic levels (BGLs) within the normal range for 6 h in comparison to single-crosslinked micelles (SCM@insulin). Therefore, the glucose-responsive and dually crosslinked polyionic micelle system exhibits potential as a viable option for the treatment of diabetes.

Lab on the Microneedles: A Wearable Metal-organic Frameworks-Based Sensor for Visual Monitoring of Stress Hormone

Abnormal secretion and dysrhythmias of cortisol (CORT) are associated with various diseases such as sleep disorders, depression, and chronic fatigue. Wearable devices are a cutting-edge technology for point-of-care detection and dynamic monitoring of CORT with inspiring convenience. Herein, we developed a minimally invasive skin-worn device with the advanced integration of both interstitial fluid (ISF) sampling and target molecule sensing for simultaneous detection of CORT via a microneedle-based sensor with high sensitivity, excellent efficiency, and outstanding reproducibility. In the microneedle patch, swellable hydrogel was employed as the adsorption matrix for ISF extraction. Meanwhile, europium metal-organic frameworks (Eu-MOF) wrapped in the matrix played a vital role in CORT recognition and quantitative analysis. The wearable and label-free Eu-MOF-loaded microneedle patch exhibited high sensitivity in CORT detection with the detection limit reaching 10-9 M and excellent selectivity. Molecular dynamics simulation-driven mechanism exploration revealed that the strong interface interaction promoted fluorescence quenching of Eu-MOF. Moreover, in vitro and in vivo investigation confirmed the feasibility and reliability of the sensing method, and excellent biocompatibility was validated. Overall, a sensitive approach based on the wearable Eu-MOF microneedle (MN) patch was established for the simultaneous detection of CORT via visible fluorescence quenching with exciting clinical-translational ability.

Enhancing diabetic wound healing with a pH/glucose dual-responsive hydrogel for ROS clearance and antibacterial activity

Currently, the treatment of diabetic wounds in clinical practice is still unsatisfactory due to the risks of oxidative damage and bacterial infection during the healing process. An optimal wound dressing should exhibit robust capabilities in scavenging reactive oxygen species (ROS) and combatting bacterial growth. In this study, we utilized borax as a crosslinker and prepared a pH/glucose dual-responsive composite hydrogel based on poly(vinyl alcohol) (PVA), sodium alginate (SA), and tannic acid (TA). This hydrogel, loaded with cerium dioxide, serves as an effective ROS scavenger, promoting wound closure by reducing the level of ROS in the wound area. Additionally, the hydrogel can release the antibacterial drug ofloxacin in response to the low pH and high glucose microenvironment in infected wounds. Results from skin defect model in diabetic mice demonstrated this ROS-scavenging and antibacterial hydrogel can suppress inflammation and accelerate wound healing. In summary, our work provides a new perspective on a local and stimulus-responsive drug delivery strategy for treating diabetic wounds.

Inflammatory macrophage reprogramming strategy of fucoidan microneedles-mediated ROS-responsive polymers for rheumatoid arthritis

During the pathogenesis of rheumatoid arthritis, inflammatory cells usually infiltrate synovial tissues, notably, M1-type macrophages, whose redox imbalance leads to the degradation of joint structures and deterioration of function. Natural active products play a vital role in immune modulation and antioxidants. In this study, we constructed a ROS-responsive nanoparticle called FTL@SIN, which consists of fucoidan (Fuc) and luteolin (Lut) connected by a ROS-responsive bond, Thioketal (TK), and encapsulated with an anti-rheumatic drug, Sinomenine (SIN), for synergistic anti-inflammatory effects. The FTL@SIN is then dispersed in high molecular weight Fuc-fabricated dissolvable microneedles (FTL@SIN MNs) for local administration. Therapy of FTL@SIN MNs afforded a significant decrease in macrophage inflammation while decreasing key pro-inflammatory cytokines and repolarizing M1 type to M2 type, thereby ameliorating synovial inflammation, and promoting cartilage repair. Additionally, our investigations have revealed that Fucoidan (Fuc) demonstrates synergistic effects, exhibiting superior mechanical strength and enhanced physical stability when compared to microneedles formulated solely with hyaluronic acid. This study combines nanomedicine with traditional Chinese medicine, a novel drug delivery strategy that presents a promising avenue for therapeutic intervention in rheumatoid arthritis.

Diagnostic, Therapeutic, and Theranostic Multifunctional Microneedles

Microneedles (MNs) have maintained their popularity in therapeutic and diagnostic medical applications throughout the past decade. MNs are originally designed to gently puncture the stratum corneum layer of the skin and have lately evolved into intelligent devices with functions including bodily fluid extraction, biosensing, and drug administration. MNs offer limited invasiveness, ease of application, and minimal discomfort. Initially manufactured solely from metals, MNs are now available in polymer-based varieties. MNs can be used to create systems that deliver drugs and chemicals uniformly, collect bodily fluids, and are stimulus-sensitive. Although these advancements are favorable in terms of biocompatibility and production costs, they are insufficient for the therapeutic use of MNs. This is the first comprehensive review that discusses individual MN functions toward the evolution and development of smart and multifunctional MNs for a variety of novel and impactful future applications. The study examines fabrication techniques, application purposes, and experimental details of MN constructs that perform multiple functions concurrently, including sensing, drug-molecule release, sampling, and remote communication capabilities. It is highly likely that in the near future, MN-based smart devices will be a useful and important component of standard medical practice for different applications.

Advances in local drug delivery technologies for improved rheumatoid arthritis therapy

Rheumatoid arthritis (RA) is a chronic inflammatory autoimmune disease characterized by an inflammatory microenvironment and cartilage erosion within the joint cavity. Currently, antirheumatic agents yield significant outcomes in RA treatment. However, their systemic administration is limited by inadequate drug retention in lesion areas and non-specific tissue distribution, reducing efficacy and increasing risks such as infection due to systemic immunosuppression. Development in local drug delivery technologies, such as nanostructure-based and scaffold-assisted delivery platforms, facilitate enhanced drug accumulation at the target site, controlled drug release, extended duration of the drug action, reduced both dosage and administration frequency, and ultimately improve therapeutic outcomes with minimized damage to healthy tissues. In this review, we introduced pathogenesis and clinically used therapeutic agents for RA, comprehensively summarized locally administered nanostructure-based and scaffold-assisted drug delivery systems, aiming at improving the therapeutic efficiency of RA by alleviating the inflammatory response, preventing bone erosion and promoting cartilage regeneration. In addition, the challenges and future prospects of local delivery for clinical translation in RA are discussed.

Reactive Microneedle Patches with Antibacterial and Dead Bacteria-Trapping Abilities for Skin Infection Treatment

Bacterial skin infections are highly prevalent and pose a significant public health threat. Current strategies are primarily focused on the inhibition of bacterial activation while disregarding the excessive inflammation induced by dead bacteria remaining in the body and the effect of the acidic microenvironment during therapy. In this study, a novel dual-functional MgB2 microparticles integrated microneedle (MgB2 MN) patch is presented to kill bacteria and eliminate dead bacteria for skin infection management. The MgB2 microparticles not only can produce a local alkaline microenvironment to promote the proliferation and migration of fibroblasts and keratinocytes, but also achieve >5 log bacterial inactivation. Besides, the MgB2 microparticles effectively mitigate dead bacteria-induced inflammation through interaction with lipopolysaccharide (LPS). With the incorporation of these MgB2 microparticles, the resultant MgB2 MN patches effectively kill bacteria and capture dead bacteria, thereby mitigating these bacteria-induced inflammation. Therefore, the MgB2 MN patches show good therapeutic efficacy in managing animal bacterial skin infections, including abscesses and wounds. These results indicate that reactive metal borides-integrated microneedle patches hold great promise for the treatment of clinical skin infections.

Fabrication of Multiple-Channel Electrochemical Microneedle Electrode Array via Separated Functionalization and Assembly Method

Real-time monitoring of physiological indicators inside the body is pivotal for contemporary diagnostics and treatments. Implantable electrodes can not only track specific biomarkers but also facilitate therapeutic interventions. By modifying biometric components, implantable electrodes enable in situ metabolite detection in living tissues, notably beneficial in invasive glucose monitoring, which effectively alleviates the self-blood-glucose-managing burden for patients. However, the development of implantable electrochemical electrodes, especially multi-channel sensing devices, still faces challenges: (1) The complexity of direct preparation hinders functionalized or multi-parameter sensing on a small scale. (2) The fine structure of individual electrodes results in low spatial resolution for sensor functionalization. (3) There is limited conductivity due to simple device structures and weakly conductive electrode materials (such as silicon or polymers). To address these challenges, we developed multiple-channel electrochemical microneedle electrode arrays (MCEMEAs) via a separated functionalization and assembly process. Two-dimensional microneedle (2dMN)-based and one-dimensional microneedle (1dMN)-based electrodes were prepared by laser patterning, which were then modified as sensing electrodes by electrochemical deposition and glucose oxidase decoration to achieve separated functionalization and reduce mutual interference. The electrodes were then assembled into 2dMN- and 1dMN-based multi-channel electrochemical arrays (MCEAs), respectively, to avoid damaging functionalized coatings. In vitro and in vivo results demonstrated that the as-prepared MCEAs exhibit excellent transdermal capability, detection sensitivity, selectivity, and reproducibility, which was capable of real-time, in situ glucose concentration monitoring.

Rapid Correction of the Hypoglycemia State in Nonhuman Primates Using a Glucagon Long-Dissolving Microneedle Patch

The timely administration of glucagon is a standard clinical practice for the treatment of severe hypoglycemia. However, the process involves cumbersome steps, including the reconstitution of labile glucagon and filling of the syringe, which cause considerable delays in emergency situations. Moreover, multiple dosages are often required to prevent the recurrence of the hypoglycemic episode because of the short half-life of glucagon in plasma. Herein, we develop a glucagon-loaded long-dissolving microneedle (GLMN) patch that exhibits the properties of fast onset and sustained activity for the effective treatment of severe hypoglycemia. Three types of MN patches were fabricated with different dimensions (long, medium, and short). The longer MN patch packaged a higher dosage of glucagon and exhibited supreme mechanical strength compared to the shorter one. Additionally, the longer MN patch could insert more deeply into the skin, resulting in higher permeability of glucagon across the skin tissue and more rapid systemic absorption as compared with the shorter MN patch. The GLMN patch was observed to reverse the effects of hypoglycemia within 15 min of application in animal models (specifically, rat and rhesus monkey models) and maintained long-term glycemic control, owing to highly efficient drug permeation and the drug reservoir effect of the MN base. The current study presents a promising strategy for the rapid reversal of severe hypoglycemia that exhibits the desirable properties of easy use, high efficiency, and sustained action.

Targeting Diverse Wounds and Scars: Recent Innovative Bio-design of Microneedle Patch for Comprehensive Management

Wounds and the subsequent formation of scars constitute a unified and complex phased process. Effective treatment is crucial; however, the diverse therapeutic approaches for different wounds and scars, as well as varying treatment needs at different stages, present significant challenges in selecting appropriate interventions. Microneedle patch (MNP), as a novel minimally invasive transdermal drug delivery system, has the potential for integrated and programmed treatment of various diseases and has shown promising applications in different types of wounds and scars. In this comprehensive review, the latest applications and biotechnological innovations of MNPs in these fields are thoroughly explored, summarizing their powerful abilities to accelerate healing, inhibit scar formation, and manage related symptoms. Moreover, potential applications in various scenarios are discussed. Additionally, the side effects, manufacturing processes, and material selection to explore the clinical translational potential are investigated. This groundwork can provide a theoretical basis and serve as a catalyst for future innovations in the pursuit of favorable therapeutic options for skin tissue regeneration.

Intelligent Biomaterialomics: Molecular Design, Manufacturing, and Biomedical Applications

Materialomics integrates experiment, theory, and computation in a high-throughput manner, and has changed the paradigm for the research and development of new functional materials. Recently, with the rapid development of high-throughput characterization and machine-learning technologies, the establishment of biomaterialomics that tackles complex physiological behaviors has become accessible. Breakthroughs in the clinical translation of nanoparticle-based therapeutics and vaccines have been observed. Herein, recent advances in biomaterials, including polymers, lipid-like materials, and peptides/proteins, discovered through high-throughput screening or machine learning-assisted methods, are summarized. The molecular design of structure-diversified libraries; high-throughput characterization, screening, and preparation; and, their applications in drug delivery and clinical translation are discussed in detail. Furthermore, the prospects and main challenges in future biomaterialomics and high-throughput screening development are highlighted.

Application of hydrogel microneedles in the oral cavity

Microneedles are a transdermal drug delivery system in which the needle punctures the epithelium to deliver the drug directly to deep tissues, thus avoiding the influence of the first-pass effect of the gastrointestinal tract and minimizing the likelihood of pain induction. Hydrogel microneedles are microneedles prepared from hydrogels that have good biocompatibility, controllable mechanical properties, and controllable drug release and can be modified to achieve environmental control of drug release in vivo. The large epithelial tissue in the oral cavity is an ideal site for drug delivery via microneedles. Hydrogel microneedles can overcome mucosal hindrances to delivering drugs to deep tissues; this prevents humidity and a highly dynamic environment in the oral cavity from influencing the efficacy of the drugs and enables them to obtain better therapeutic effects. This article analyzes the materials and advantages of common hydrogel microneedles and reviews the application of hydrogel microneedles in the oral cavity.

Multifunctional hyaluronic acid/gelatin methacryloyl core-shell microneedle for comprehensively treating oral mucosal ulcers

Oral ulceration is the most common oral mucosal disease. Oral mucosal ulcers are extremely painful, may interfere with eating and speaking, and potentially complicate systemic symptoms in severe cases. The humid and highly dynamic environment of the oral cavity makes local drug administration for treating oral mucosal ulcers challenging. To overcome these challenges, we designed and prepared a novel dissolving microneedle (MN) patch containing multiple drugs in a core-shell to promote oral ulcer healing. The MNs contained a methacrylate gelatin shell layer of basic fibroblast growth factor (bFGF), a hyaluronic acid (HA) core loaded with dexamethasone (DXMS), and zeolite imidazoline framework-8 (ZIF-8) encapsulated in the HA-based backplane. Progressive degradation of gelatin methacryloyl (GelMA) from the tip of the MN patch in the oral mucosa resulted in sustained bFGF release at the lesion site, significantly promoting cell migration, proliferation, and angiogenesis. Moreover, the rapid release of HA and, subsequently, DXMS inhibited inflammation, and the remaining MN backing after the tip dissolved behaved as a dressing, releasing ZIF-8 for its antimicrobial effects. This novel, multifunctional, transmucosal core-shell MN patch exhibited excellent anti-inflammatory, antimicrobial, and pro-healing effects in vivo and in vitro, suggesting that it can promote oral ulcer healing.

Antidiabetic Close Loop Based on Wearable DNA-Hydrogel Glucometer and Implantable Optogenetic Cells

Diabetes mellitus and its associated secondary complications have become a pressing global healthcare issue. The current integrated theranostic plan involves a glucometer-tandem pump. However, external condition-responsive insulin delivery systems utilizing rigid glucose sensors pose challenges in on-demand, long-term insulin administration. To overcome these challenges, we present a novel model of antidiabetic management based on printable metallo-nucleotide hydrogels and optogenetic engineering. The conductive hydrogels were self-assembled by bioorthogonal chemistry using oligonucleotides, carbon nanotubes, and glucose oxidase, enabling continuous glucose monitoring in a broad range (0.5-40 mM). The optogenetically engineered cells were enabled glucose regulation in type I diabetic mice via a far-red light-induced transgenic expression of insulin with a month-long avidity. Combining with a microchip-integrated microneedle patch, a prototyped close-loop system was constructed. The glucose levels detected by the sensor were received and converted by a wireless controller to modulate far-infrared light, thereby achieving on-demand insulin expression for several weeks. This study sheds new light on developing next-generation diagnostic and therapy systems for personalized and digitalized precision medicine.

Multi-material 3D printed eutectogel microneedle patches integrated with fast customization and tunable drug delivery

Microneedle patches are emerging multifunctional platforms for transdermal diagnostics and drug delivery. However, it still remains challenging to develop smart microneedles integrated with customization, sensing, detection and drug delivery by 3D printing strategy. Here, we present an innovative but facile strategy to rationally design and fabricate multifunctional eutectogel microneedle (EMN) patches via multi-material 3D printing. Polymerizable deep eutectic solvents (PDES) were selected as printing inks for rapid one-step fabrication of 3D printing functional EMN patches due to fast photopolymerization rate and ultrahigh drug solubility. Moreover, stretchable EMN patches incorporating rigid needles and flexible backing layers were easily realized by changing PDES compositions of multi-material 3D printing. Meanwhile, we developed multifunctional smart multi-material EMN patches capable of performing wireless monitoring of body movements, painless colorimetric glucose detection, and controlled transdermal drug delivery. Thus, such multi-material EMN system could provide an effective platform for the painless diagnosis, detection, and therapy of a variety of diseases.

Glucose-responsive insulin microneedle patches for long-acting delivery and release visualization

Limited drug loading and incomplete drug release are two major obstacles that traditional polymeric microneedles (MNs) have to overcome. For smart controlled-release MNs, since drug release duration is uncertain, a clear indication of the finish of drug release is also important for patient guidance on the timing of the next dose. In this study, MN with a triple structure of a glucose-responsive shell, loaded insulin powders and a colored propelling inner core (inspired by the mechanism of osmotic pump) was innovatively constructed. The MN patch could release insulin according to blood glucose levels (BGLs) and had excellent drug loading, more complete drug release, and good drug stability, which significantly prolonged the normoglycemic time. An approximately 0.3 cm2 patch has a hypoglycemic effect on diabetic mice for up to 24 h. Moreover, the fading of the inner core could indicate the release process of the loaded drug and can help to facilitate uninterrupted closed loop therapy for patients. The designed triple MN structure is also suitable, and can be used in the design of other smart MN drug delivery systems to further improve their drug loading capacity and simultaneously achieve more complete, smart controlled and visualized drug release.

Self-Heating Multistage Microneedle Patch for Topical Therapy of Skin Cancer

Topical therapy is a favored route for treating skin cancers, but remain many challenges, such as low delivery efficiency, limited tumor tissue penetration, and unsatisfactory blood circulation. Here, a self-heating microneedle (MN) patch with multilevel structures, including a dissolvable base for rapid drug release, a degradable tip for sustained drug release, and a self-heating substrate is described. The thermally enhanced drug release performance is validated through both in vitro and in vivo experiments. High tumor therapeutic efficacy can be achieved due to the rapid release of 5-fluorouracil, while the sustained release of thymoquinone endows the MN patch with long-term tumor inhibition ability. It is further demonstrated the feasibility of such an MN patch for in vivo topical therapy of cutaneous squamous cell carcinoma with high efficacy, low side effects, and long-term inhibition of recurrence. This self-heating MN patch holds great promise for potential clinical applications, especially for the treatment of skin cancers.

Latest advances in glucose-responsive microneedle-based systems for transdermal insulin delivery

The development of a self-regulated minimally invasive system for insulin delivery can be considered as the holy grail in the field of diabetes mellitus. A delivery system capable of releasing insulin in response to blood glucose levels would significantly improve the quality of life of diabetic patients, eliminating the need for frequent finger-prick tests and providing better glycaemic control with lower risk of hypoglycaemia. In this context, the latest advances in glucose-responsive microneedle-based transdermal insulin delivery are here compiled with a thorough analysis of the delivery mechanisms and challenges lying ahead in their clinical translation. Two main groups of microneedle-based systems have been developed so far: glucose oxidase-containing and phenylboronic acid-containing systems. Both strategies in combination have also been tested and two other novel strategies are under development, namely electronic closed-loop and glucose transporter-based systems. Results from preclinical studies conducted using these different types of glucose-triggered release systems are comprehensively discussed. Altogether, this analysis from both a mechanistic and translational perspective will provide rationale and/or guidance for future trends in the research hotspot of glucose-responsive microneedle-based insulin delivery systems.

Technological Advances of Wearable Device for Continuous Monitoring of In Vivo Glucose

Managing diabetes is a chronic challenge today, requiring monitoring and timely insulin injections to maintain stable blood glucose levels. Traditional clinical testing relies on fingertip or venous blood collection, which has facilitated the emergence of continuous glucose monitoring (CGM) technology to address data limitations. Continuous glucose monitoring technology is recognized for tracking long-term blood glucose fluctuations, and its development, particularly in wearable devices, has given rise to compact and portable continuous glucose monitoring devices, which facilitates the measurement of blood glucose and adjustment of medication. This review introduces the development of wearable CGM-based technologies, including noninvasive methods using body fluids and invasive methods using implantable electrodes. The advantages and disadvantages of these approaches are discussed as well as the use of microneedle arrays in minimally invasive CGM. Microneedle arrays allow for painless transdermal puncture and are expected to facilitate the development of wearable CGM devices. Finally, we discuss the challenges and opportunities and look forward to the biomedical applications and future directions of wearable CGM-based technologies in biological research.

Endogenous stimuli-responsive separating microneedles to inhibit hypertrophic scar through remodeling the pathological microenvironment

Hypertrophic scar (HS) considerably affects the appearance and causes tissue dysfunction in patients. The low bioavailability of 5-fluorouracil poses a challenge for HS treatment. Here we show a separating microneedle (MN) consisting of photo-crosslinked GelMA and 5-FuA-Pep-MA prodrug in response to high reactive oxygen species (ROS) levels and overexpression of matrix metalloproteinases (MMPs) in the HS pathological microenvironment. In vivo experiments in female mice demonstrate that the retention of MN tips in the tissue provides a slowly sustained drug release manner. Importantly, drug-loaded MNs could remodel the pathological microenvironment of female rabbit ear HS tissues by ROS scavenging and MMPs consumption. Bulk and single cell RNA sequencing analyses confirm that drug-loaded MNs could reverse skin fibrosis through down-regulation of BCL-2-associated death promoter (BAD), insulin-like growth factor 1 receptor (IGF1R) pathways, simultaneously regulate inflammatory response and keratinocyte differentiation via up-regulation of toll-like receptors (TOLL), interleukin-1 receptor (IL1R) and keratinocyte pathways, and promote the interactions between fibroblasts and keratinocytes via ligand-receptor pair of proteoglycans 2 (HSPG2)-dystroglycan 1(DAG1). This study reveals the potential therapeutic mechanism of drug-loaded MNs in HS treatment and presents a broad prospect for clinical application.

Hydrogel-Based Biosensors for Bacterial Infections

Hydrogels are known to have the advantages such as good biodegradability, biocompatibility, and easy functionalization, making them ideal candidates for biosensors. Hydrogel-based biosensors that respond to bacteria-induced microenvironmental changes such as pH, enzymes, antigens, etc., or directly interact with bacterial surface receptors, can be applied for early diagnosis of bacterial infections, providing information for timely treatment while avoiding antibiotic abuse. Furthermore, hydrogel biosensors capable of both bacteria diagnosis and treatment will greatly facilitate the development of point-of-care monitoring of bacterial infections. In this review, the recent advancement of hydrogel-based biosensors for bacterial infection is summarized and discussed. First, the biosensors based on pH-sensitive hydrogels, bacterial-specific secretions-sensitive hydrogels, and hydrogels directly in contact with bacterial surfaces are presented. Next, hydrogel biosensors capable of detecting bacterial infection in the early stage followed by immediate on-demand treatment are discussed. Finally, the challenges and future development of hydrogel biosensors for bacterial infections are proposed.

Recent progress on the development of bioinspired surfaces with high aspect ratio microarray structures: From fabrication to applications

Surfaces with high aspect ratio microarray structures can implement sophisticated assignment in typical fields including microfluidics, sensor, biomedicine, et al. via regulating their deformation or the material properties. Inspired by natural materials and systems, for example sea cockroaches, water spiders, cacti, lotus leaves, rice leaves, and cedar leaves, many researchers have focused on microneedle functional surface studies. When the surface with high aspect ratio microarray structures is stimulated by the external fields, such as optical, electric, thermal, magnetic, the high aspect ratio microarray structures can undergo hydrophilic and hydrophobic switching or shape change, which may be gifted the surfaces with the ability to perform complex task, including directional liquid/air transport, targeted drug delivery, microfluidic chip sensing. In this review, the fabrication principles of various surfaces with high aspect ratio microarray structures are classified and summarized. Mechanisms of liquid manipulation on hydrophilic/hydrophobic surfaces with high aspect ratio microarray structures are clarified based on Wenzel model, Cassie model, Laplace pressure theories and so on. Then the intelligent control strategies have been demonstrated. The applications in microfluidic, drug delivery, patch sensors have been discussed. Finally, current challenges and new insights of future prospects for dynamic manipulation of liquid/air based on biomimetic surface with high aspect ratio microarray structures are also addressed.

Fully integrated wearable microneedle biosensing platform for wide-range and real-time continuous glucose monitoring

Wearable microneedle sensors for continuous glucose monitoring (CGM) have great potential for clinical impact by allowing access to large data sets to provide individualized treatment plans. To date, their development has been challenged by the accurate wide linear range tracking of interstitial fluid (ISF) glucose (Glu) levels. Here, we present a CGM platform consisting of a three-electrode microneedle electrochemical biosensor and a fully integrated radio-chemical analysis system. The long-term performance of the robust CGM on diabetic rats was achieved by electrodepositing Prussian blue (PB), and crosslinking glucose oxidase (GOx) and chitosan to form a 3D network using glutaraldehyde (GA). After redox by GOx, PB rapidly decomposes hydrogen peroxide and mediates charge transfer, while the 3D network and graphite powder provide enrichment and release sites for Glu and catalytic products, enabling a sensing range of 0.25-35 mM. Microneedle CGM has high sensitivity, good stability, and anti-interference ability. In diabetic rats, CGM can accurately monitor Glu levels in the ISF in real-time, which are highly consistent with levels measured by commercial Glu meters. These results indicate the feasibility and application prospects of the PB-based CGM for the clinical management of diabetes. STATEMENT OF SIGNIFICANCE: This study addresses the challenge of continuous glucose monitoring system design where the narrow linear range of sensing due to the miniaturization of sensors fails to meet the monitoring needs of clinical diabetic patients. This was achieved by utilizing a three-dimensional network of glutaraldehyde cross-linked glucose oxidase and chitosan. The unique topology of the 3D network provides a large number of sites for glucose enrichment and anchors the enzyme to the sensing medium and the conductive substrate through covalent bonding, successfully blocking the escape of the enzyme and the sensing medium and shortening the electron transfer and transmission path.

Engineering the next generation of theranostic biomaterials with synthetic biology

Biomaterials have evolved from inert materials to responsive entities, playing a crucial role in disease diagnosis, treatment, and modeling. However, their advancement is hindered by limitations in chemical and mechanical approaches. Synthetic biology enabling the genetically reprograming of biological systems offers a new paradigm. It has achieved remarkable progresses in cell reprogramming, engineering designer cells for diverse applications. Synthetic biology also encompasses cell-free systems and rational design of biological molecules. This review focuses on the application of synthetic biology in theranostics, which boost rapid development of advanced biomaterials. We introduce key fundamental concepts of synthetic biology and highlight frontier applications thereof, aiming to explore the intersection of synthetic biology and biomaterials. This integration holds tremendous promise for advancing biomaterial engineering with programable complex functions.

Microneedle-Mediated Cell Therapy

Microneedles have emerged as a promising platform for transdermal drug delivery with prominent advantages, such as enhanced permeability, mitigated pain, and improved patient adherence. While microneedles have primarily been employed for delivering small molecules, nucleic acids, peptides, and proteins, recent researches have demonstrated their prospect in combination with cell therapy. Cell therapy involving administration or transplantation of living cells (e.g. T cells, stem cells, and pancreatic cells) has gained significant attention in preclinical and clinical applications for various disease treatments. However, the effectiveness of systemic cell delivery may be restricted in localized conditions like solid tumors and skin disorders due to limited penetration and accumulation into the lesions. In this perspective, an overview of recent advances in microneedle-assisted cell delivery for immunotherapy, tissue regeneration, and hormone modulation, with respect to their mechanical property, cell loading capacity, as well as viability and bioactivity of the loaded cells is provided. Potential challenges and future perspectives with microneedle-mediated cell therapy are also discussed.

Electrostatic-Interaction-Aided Microneedle Patch for Enhanced Glucose-Responsive Insulin Delivery and Three-Meal-Per-Day Blood-Glucose Regulation

The phenylborate-ester-cross-linked hydrogel microneedle patch (MNP) was promising in the diabetic field for the glucose-responsive insulin-delivering property and simple fabrication process. However, the unfit design of the charging microneedle network limited the improvement of blood-glucose regulating performances. In this work, insulin-loaded phenylborate-ester-cross-linked MNPs, with the polyzwitterion property, were constructed based on the modified ε-polylysine and poly(vinyl alcohol). The relationship between the charging nature of the MNP network and insulin release was verified by regulating the content of postprotonated positively charged amino groups. The elaborately designed MNP possessed improved glucose-responsive insulin-delivering performance. The in vivo study revealed the satisfactory results on blood-glucose regulation by the optimized MNP under the mimic three-meal-per-day mode. Moreover, the insulin bioactivity in the MNP could be maintained for 2 weeks under 25 °C. In summary, this work developed an effective strategy to improve the glucose-responsive phenylborate-ester-cross-linked MNP and enhance its potential for clinical transformation.

Advances in biomedical systems based on microneedles: design, fabrication, and application

Wearable devices have become prevalent in biomedical studies due to their convenient portability and potential utility in biomarker monitoring for healthcare. Accessing interstitial fluid (ISF) across the skin barrier, microneedle (MN) is a promising minimally invasive wearable technology for transdermal sensing and drug delivery. MN has the potential to overcome the limitations of conventional transdermal drug administration, making it another prospective mode of drug delivery after oral and injectable. Subsequently, combining MN with multiple sensing approaches has led to its extensive application to detect biomarkers in ISF. In this context, employing MN platforms and control schemes to merge diagnostic and therapeutic capabilities into theranostic systems will facilitate on-demand therapy and point-of-care diagnostics, paving the way for future MN technologies. A comprehensive analysis of the growing advances of microneedles in biomedical systems is presented in this review to summarize the latest studies for academics in the field and to offer for reference the issues that need to be addressed in MN application for healthcare. Covering an array of novel studies, we discuss the following main topics: classification of microneedles in the biomedical field, considerations of MN design, current applications of microneedles in diagnosis and therapy, and the regulatory landscape and prospects of microneedles for biomedical applications. This review sheds light on the significance of microneedle-based innovations, presenting an analysis of their potential implications and contributions to the community of wearable healthcare technologies. The review provides a comprehensive understanding of the field's current state and potential, making it a valuable resource for academics and clinicians seeking to harness the full potential of MN applications.

Genome-wide screening of m6A profiling of cutaneous wound healing in diabetic mice

OBJECTIVE

Impaired wound healing in diabetes mellitus (DM) is a major health burden on patients, their families, and society. The present study aimed to systematically profile the m6A modification landscape in cutaneous wounds in a diabetic mouse model.

APPROACH

Diabetes was induced in mice through a single intraperitoneal injection of streptozotocin (STZ); a single intraperitoneal injection of PBS was made in control mice for comparisons. Both groups then received an 8-mm diameter, full-thickness dorsal body wound with a biopsy punch. Five days after wound surgery, western blot analysis of harvested wound tissues from both groups was used to assess the expression of m6A-related enzymes. Genome-wide profiling of m6A-tagged transcripts was performed through MeRIP-seq and RNA-seq.

RESULTS

ALKBH5, an m6A eraser, was significantly upregulated, while METTL3, METTL14, and WTAP, m6A writers, were markedly downregulated in the diabetic wounds. Additionally, a total of 1335 m6A peaks were differentially expressed in MeRIP-seq and RNA-seq analyses, with 558 upregulated and 777 downregulated peaks. Finally, there was hypomethylated and hypermethylated differentiation at the gene and transcript levels.

INNOVATION

The present study was the first to reveal the m6A landscape in diabetic wounds in an animal model.

CONCLUSION

This study, by deeply analyzing the role of m6A modifications in diabetic wound healing, provides new insights and understanding into the molecular mechanisms of diabetic wound healing. Future research could further explore how m6A modifications regulate the wound healing process, thereby offering new potential targets for the treatment of diabetic wounds.

PVA-based bulk microneedles capable of high insulin loading and pH-triggered degradation for multi-responsive and sustained hypoglycemic therapy

"Closed-loop" insulin-loaded microneedle patche shows great promise for improving therapeutic outcomes and life quality for diabetes patients. However, it is typically hampered by limited insulin loading capacity, random degradation, and intricate preparation procedures for the independence of the "closed-loop" bulk microneedles. In this study, we combined the solubility of microneedles and "closed-loop" systems and designed poly(vinyl alcohol)-based bulk microneedles (MNs@GI) through in situ photopolymerization for multi-responsive and sustained hypoglycemic therapy, which significantly simplified the preparation process and improved insulin loading. GOx/insulin co-encapsulated MNs@GI with a phenylboronic ester structure improved glycemic responsiveness to control the insulin release under high glucose conditions and reduced inflammation risk in the normal skin. MNs@GI could further degrade to increase insulin release due to the crosslinked acetal-linkage hydrolysis in the presence of gluconic acid, which was caused by GOx-mediated glucose-oxidation in a hyperglycemic environment. The in vivo results showed that MNs@GI effectively regulated glycemic levels within the normal range for approximately 10 h compared to that of only insulin-loaded microneedles (MNs@INS). Consequently, the highly insulin-loaded, multi-responsive, and pH-triggered MN system has tremendous potential for diabetes treatment.

Reverse iontophoresis generated by porous microneedles produces an electroosmotic flow for glucose determination

Blood glucose level is a key indicator of a patient's health, notably the symptoms associated with diabetes. Painless and continuously monitored interstitial glucose is highly preferable for diabetes management. Microneedle arrays can be used as an effective but minimally invasive technique to break the skin barrier. Simultaneous reverse iontophoresis enables non-invasive interstitial fluid extraction from the intercellular matrix ≤25 mm under the skin's surface. Here, we describe an ion-conductive porous microneedle (PMN)-based glucose sensing device combined with reverse ion electroosmosis, in which glucose extraction can be significantly enhanced. Four novel benefits of ionophoresis are concurrently brought about by the charged PMN: (1) decreased transdermal resistance with the low invasive penetration of highly resistant stratum corneum; (2) a reduction of transdermal resistance through interconnectivity; (3) the movement of larger molecules through linked micropores; and (4) the production of an electroosmotic flow (EOF). The EOF generated by PMN is effectively extracted from the skin interstitial fluid for glucose concentration measurement. And this will likely contribute to the long-term home management of chronic diseases.

Digital automation of transdermal drug delivery with high spatiotemporal resolution

Transdermal drug delivery is of vital importance for medical treatments. However, user adherence to long-term repetitive drug delivery poses a grand challenge. Furthermore, the dynamic and unpredictable disease progression demands a pharmaceutical treatment that can be actively controlled in real-time to ensure medical precision and personalization. Here, we report a spatiotemporal on-demand patch (SOP) that integrates drug-loaded microneedles with biocompatible metallic membranes to enable electrically triggered active control of drug release. Precise control of drug release to targeted locations (<1 mm2), rapid drug release response to electrical triggers (<30 s), and multi-modal operation involving both drug release and electrical stimulation highlight the novelty. Solution-based fabrication ensures high customizability and scalability to tailor the SOP for various pharmaceutical needs. The wireless-powered and digital-controlled SOP demonstrates great promise in achieving full automation of drug delivery, improving user adherence while ensuring medical precision. Based on these characteristics, we utilized SOPs in sleep studies. We revealed that programmed release of exogenous melatonin from SOPs improve sleep of mice, indicating potential values for basic research and clinical treatments.

Pain-free oral delivery of biologic drugs using intestinal peristalsis-actuated microneedle robots

Biologic drugs hold immense promise for medical treatments, but their oral delivery remains a daunting challenge due to the harsh digestive environment and restricted gastrointestinal absorption. Here, inspired by the porcupinefish's ability to inflate itself and deploy its spines for defense, we proposed an intestinal microneedle robot designed to absorb intestinal fluids for rapid inflation and inject drug-loaded microneedles into the insensate intestinal wall for drug delivery. Upon reaching the equilibrium volume, the microneedle robot leverages rhythmic peristaltic contraction for mucosa penetration. The robot's barbed microneedles can then detach from its body during peristaltic relaxation and retain in the mucosa for drug releasing. Extensive in vivo experiments involving 14 minipigs confirmed the effectiveness of the intestinal peristalsis for microrobot actuation and demonstrated comparable insulin delivery efficacy to subcutaneous injection. The ingestible peristalsis-actuated microneedle robots may transform the oral administration of biologic drugs that primary relies on parenteral injection currently.

Biocompatible and biodegradable Bletilla striata polysaccharides hydrogels crosslinked by BDDE for wound healing through the regulating of macrophage polarization

Bletilla striata polysaccharide (BSP) is a naturally occurring polysaccharide that demonstrates notable biocompatibility and biodegradability. Additionally, BSP possesses therapeutic attributes, including anti-inflammatory and reparative actions. Herein, we report a novel BSP hydrogel prepared using 1,4-butanediol diglycidyl ether (BDDE) as a cross-linking agent. The hydrogel was synthesized via condensation of the hydroxyl group in the BSP molecule with the epoxy group in BDDE. This technique of preparation preserves BSP's natural properties while avoiding any potentially hazardous or adverse effects that may occur during the chemical alteration. Compared with BSP before crosslinking, BSP hydrogel has distinct advantages, such as a three-dimensional network structure, improved water retention, enhanced swelling capacity, greater thermal stability, and superior mechanical properties. Experiments on in vitro cytotoxicity, hemolysis, and degradation revealed that BSP hydrogel had good biocompatibility and biodegradability. Finally, we evaluated the in vivo wound repair effect of BSP hydrogel, and the results showed that BSP hydrogel had a significant wound-healing effect. Furthermore, the BSP hydrogel promoted the polarization of M1-type macrophages towards the M2-type and reduced the inflammatory response during the wound healing phase. Because of its ease of production, safety, efficacy, and environmental friendliness, BSP hydrogel is considered a highly promising material for wound dressings.

A universal powder-laden crosslinked chitosan microneedle patch for high-dose controllable drug delivery

In this study, we constructed a novel powder-laden core-shell crosslinked chitosan microneedle patch for high-dose and controllable delivery of various drugs, including both macromolecular biological drugs and small-molecule chemical drugs. Direct loading of drug powders greatly improved drug loading capacity and minimized degradation. The results of the in vitro drug release study suggested that the release behaviors of the most tested drugs (both macromolecular drugs and small-molecule drugs) can be tuned by adjusting the crosslink density of the microneedle shell to achieve either rapid or sustained release of the loaded drug. The in vivo hypoglycemic efficacy test in streptozotocin-induced diabetic mice further proved that the onset and duration of the insulin-laden patch can be customized by adjusting the crosslink density. Furthermore, a combination of microneedle patches with different crosslink densities not only rapidly reduced blood glucose levels to normoglycemic levels (within 1 h) but also maintained normoglycemia for up to 36 h. The insulin loaded in the patch also showed good stability during storage at 40 °C for 6 months. Our results suggest that this powder-laden patch represents a strong candidate for addressing the multiple challenges in the preparation and application of polymeric microneedles and shows promise in clinical applications.

An Ultraswelling Microneedle Device for Facile and Efficient Drug Loading and Transdermal Delivery

The advancement and extensive demand for transdermal therapies can benefit from a safe, and efficient and user-friendly transdermal technology with broad applicability in delivering various hydrophilic drugs. Here the design and proof of concept applications of an ultraswelling microneedle device that enables the facile and efficient loading and transdermal delivery of hydrophilic drugs with different molecular weights is reported. The device consists of a super-hydrophilic hydrogel microneedle array and a resin base substrate. Using a special micromolding technique that involves hydrated crosslinking and cryogenic-demolding, the microneedle part displays a rapid swelling ratio of ≈3800%, enabling the loading of drugs up to 500 kDa in molecular weight. The drug loading process using the device just involves incubating the microneedle part in a drug solution for 1 min, followed by 15 min of drying. The microneedles can easily penetrate the skin under press and detach from the base substrate under shear, thereby releasing the payload. Administration of desired therapeutic agents using the device outperformed conventional administration methods in mitigating psoriasis and eliciting immunity. This biocompatible device, capable of withstanding ethylene oxide sterilization, can enhance the efficacy and accessibility of transdermal therapies in research institutes, hospitals, and even home settings.

Regulating Size and Charge of Liposomes in Microneedles to Enhance Intracellular Drug Delivery Efficiency in Skin for Psoriasis Therapy

The stratum corneum (SC) and cell membrane are two major barriers that hinder the therapeutic outcomes of transdermal drug delivery for the treatment of skin diseases. While microneedles (MNs) can efficiently penetrate the SC to deliver nanomedicines, the optimization of physicochemical properties of nanomedicines in MNs to enhance their in vivo cellular delivery efficiency remains unclear. Here, how the size and surface charge of drug-loaded liposomes in MNs influence the retention time and cellular delivery in psoriatic skin is systematically investigated. The results indicate that while 100 nm negatively-charged liposomes in MNs show higher cellular uptake in vitro, 250 and 450 nm liposomes could enhance skin retention and the long-term in vivo cellular delivery efficiency of drugs. Moreover, 250 nm cationic liposomes with a stronger positive charge show an extraordinarily long skin retention time of 132 h and significantly higher in vivo cellular internalization. In the treatment study, dexamethasone (dex)-loaded cationic liposomes-integrated MNs show better therapeutic outcomes than dex-loaded anionic liposomes-integrated MNs in a psoriasis-like animal model. The design principles of liposomes in MN drug delivery systems explored in the study hold the potential for enhancing the therapeutic outcomes of psoriasis and are instrumental for successful translation.

The Emergence of AI-Based Wearable Sensors for Digital Health Technology: A Review

Disease diagnosis and monitoring using conventional healthcare services is typically expensive and has limited accuracy. Wearable health technology based on flexible electronics has gained tremendous attention in recent years for monitoring patient health owing to attractive features, such as lower medical costs, quick access to patient health data, ability to operate and transmit data in harsh environments, storage at room temperature, non-invasive implementation, mass scaling, etc. This technology provides an opportunity for disease pre-diagnosis and immediate therapy. Wearable sensors have opened a new area of personalized health monitoring by accurately measuring physical states and biochemical signals. Despite the progress to date in the development of wearable sensors, there are still several limitations in the accuracy of the data collected, precise disease diagnosis, and early treatment. This necessitates advances in applied materials and structures and using artificial intelligence (AI)-enabled wearable sensors to extract target signals for accurate clinical decision-making and efficient medical care. In this paper, we review two significant aspects of smart wearable sensors. First, we offer an overview of the most recent progress in improving wearable sensor performance for physical, chemical, and biosensors, focusing on materials, structural configurations, and transduction mechanisms. Next, we review the use of AI technology in combination with wearable technology for big data processing, self-learning, power-efficiency, real-time data acquisition and processing, and personalized health for an intelligent sensing platform. Finally, we present the challenges and future opportunities associated with smart wearable sensors.

A transdermal drug delivery system based on dissolving microneedles for boron neutron capture therapy of melanoma

Boron neutron capture therapy (BNCT) is a promising therapy for malignant tumors that requires selective and high concentrations of 10B accumulation in tumor cells. Despite ongoing developments in novel boron agents and delivery carriers, the progress and clinical application of BNCT is still restricted by the low 10B accumulation and tumor-to-normal tissue (T/N) ratio. Herein, a dissolving microneedle-based transdermal drug delivery system was specifically designed for BNCT in a mouse model of melanoma. By incorporating fructose-BPA (F-BPA) into PVA microneedle tips, this system successfully delivered sufficient F-BPA into the melanoma site after the application of only two patches. Notably, the T/N ratio achieved through the treatment combining PVA/F-BPA MNs with BNCT (PVA/F-BPA MNs-BNCT) surpassed 93.16, signifying a great improvement. Furthermore, this treatment approach effectively inhibited tumor growth and significantly enhanced the survival rate of the mice. In brief, our study introduces a novel, simple, and efficient administration strategy for BNCT, opening new possibilities for the design of nanomedicine for BNCT.

Smart Responsive Microneedles for Controlled Drug Delivery

As an emerging technology, microneedles offer advantages such as painless administration, good biocompatibility, and ease of self-administration, so as to effectively treat various diseases, such as diabetes, wound repair, tumor treatment and so on. How to regulate the release behavior of loaded drugs in polymer microneedles is the core element of transdermal drug delivery. As an emerging on-demand drug-delivery technology, intelligent responsive microneedles can achieve local accurate release of drugs according to external stimuli or internal physiological environment changes. This review focuses on the research efforts in smart responsive polymer microneedles at home and abroad in recent years. It summarizes the response mechanisms based on various stimuli and their respective application scenarios. Utilizing innovative, responsive microneedle systems offers a convenient and precise targeted drug delivery method, holding significant research implications in transdermal drug administration. Safety and efficacy will remain the key areas of continuous efforts for research scholars in the future.

Ultrarapid-Acting Microneedles for Immediate Delivery of Biotherapeutics

Subcutaneous (SC) injection is a common administration route for rapid and efficient delivery of biotherapeutics. However, syringe-based injections usually require professional assistance and are associated with pain and potential risks of infections, thus leading to undesired patient compliance and poor life quality. Herein, this work presents an ultrarapid-acting microneedle (URA-MN) patch for immediate transdermal delivery of therapeutics in a minimally invasive manner. Effervescent agents are incorporated into the tip of URA-MN for rapid generation of CO2 bubbles upon insertion into the skin, immediately powering the biotherapeutics release within a few minutes. The release kinetics of diverse agents including liraglutide (LRT), insulin, and heparin from the URA-MN patches are evaluated in three different mouse models, and the rapid release of biotherapeutics and potent therapeutic effects are achieved with only 5 min administration. Noteworthily, attributed to the short application duration and negligible residuals of MN matrix remaining in the skin, the URA-MN patch shows desirable biocompatibility after six-week administration.

"Smart" Matrix Microneedle Patch Made of Self-Crosslinkable and Multifunctional Polymers for Delivering Insulin On-Demand

A transdermal patch that delivers insulin at high glucose concentrations can offer tremendous advantages to ease the concern of safety and improve the quality of life for people with diabetes. Herein, a novel self-crosslinkable and glucose-responsive polymer-based microneedle patch (MN) is designed to deliver insulin at hyperglycemia. The microneedle patch is made of hyaluronic acid polymers functionalized with dopamine and 4-amino-3-fluorophenylboronic acid (AFBA) that can be quickly crosslinked upon mixing of the polymer solutions in the absence of any chemicalcrosslinking agents or organic solvents. The catechol groups in the dopamine (DA) units form covalent crosslinkages among themselves by auto-oxidation and dynamic crosslink with phenylboronic acid (PBA) via complexation. The reversible crosslinkages between catechol and boronate decrease with increasing glucose concentration leading to higher swelling and faster insulin release at hyperglycemia as compared to euglycemia. Such superior glucose-responsive properties are demonstrated by in vitro analyses and in vivo efficacy studies. The hydrogel polymers also preserve native structure and bioactivity of insulin, attributable to the interaction of hyaluronic acid (HA) with insulin molecules, as revealed by experiments and molecular dynamics simulations. The simplicity in the design and fabrication process, and glucose-responsiveness in insulin delivery impart the matrix microneedle (mMN) patch great potential for clinical translation.

Microneedle-based cell delivery and cell sampling for biomedical applications

Cell-based therapeutics are novel therapeutic strategies that can potentially treat many presently incurable diseases through novel mechanisms of action. Cell therapies may benefit from the ease, safety, and efficacy of administering therapeutic cells. Despite considerable recent technological and biological advances, several barriers remain to the clinical translation and commercialization of cell-based therapies, including low patient compliance, personal handling inconvenience, poor biosafety, and limited biocompatibility. Microneedles (MNs) are emerging as a promising biomedical device option for improved cell delivery with little invasion, pain-free administration, and simplicity of disposal. MNs have shown considerable promise in treating a wide range of diseases and present the potential to improve cell-based therapies. In this review, we first summarized the latest advances in the various types of MNs developed for cell delivery and cell sampling. Emphasis was given to the design and fabrication of various types of MNs based on their structures and materials. Then we focus on the recent biomedical applications status of MNs-mediated cell delivery and sampling, including tissue repair (wound healing, heart repair, and endothelial repair), cancer treatment, diabetes therapy, cell sampling, and other applications. Finally, the current status of clinical application, potential perspectives, and the challenges for clinical translation are also highlighted.

Glucose-Responsive Fibrin Hydrogel-Based Multimodal Nucleic Acid Delivery System

Nucleic acid therapy has emerged as a potential alternative for promoting wound healing by gene expression modification. On the other hand, protecting the nucleic acid payload from degradation, efficient bioresponsive delivery and effective transfection into cells remain challenging. A glucose-responsive gene delivery system for treating diabetic wounds would be advantageous as it would be responsive to the underlying pathology giving a regulated payload delivery with fewer side effects. Herein a GOx-based glucose-responsive delivery system is designed based on fibrin-coated polymeric microcapsules (FCPMC) using the layer-by-layer (LbL) approach that simultaneously delivers two nucleic acids in diabetic wounds. The designed FCPMC displays an ability to effectively load many nucleic acids in polyplexes and release it over a prolonged period with no cytotoxic effects seen in in vitro studies. Furthermore, the developed system does not show any undesired effects in vivo. When applied to wounds in genetically diabetic db/db mice, the fabricated system on its own improves reepithelialization and angiogenesis while decreasing inflammation. Also, key proteins involved in the wound healing process, i.e., Actn2, MYBPC1, and desmin, are upregulated in the glucose-responsive fibrin hydrogel (GRFHG) treated group of animals. In conclusion, the fabricated hydrogel promotes wound healing. Furthermore, the system may be encapsulated with various therapeutic nucleic acids that aid wound healing.

Rational Design and Efficacy of Glucose-Responsive Insulin Therapeutics and Insulin Delivery Systems by Computation Using Connected Human and Rodent Models

Glucose-responsive insulins (GRIs) use plasma glucose levels in a diabetic patient to activate a specifically designed insulin analogue to a more potent state in real time. Alternatively, some GRI concepts use glucose-mediated release or injection of insulin into the bloodstream. GRIs hold promise to exhibit much improved pharmacological control of the plasma glucose concentration, particularly for the problem of therapeutically induced hypoglycemia. Several innovative GRI schemes are introduced into the literature, but there remains a dearth of quantitative analysis to aid the development and optimization of these constructs into effective therapeutics. This work evaluates several classes of GRIs that are proposed using a pharmacokinetic model as previously described, PAMERAH, simulating the glucoregulatory system of humans and rodents. GRI concepts are grouped into three mechanistic classes: 1) intrinsic GRIs, 2) glucose-responsive particles, and 3) glucose-responsive devices. Each class is analyzed for optimal designs that maintain glucose levels within the euglycemic range. These derived GRI parameter spaces are then compared between rodents and humans, providing the differences in clinical translation success for each candidate. This work demonstrates a computational framework to evaluate the potential clinical translatability of existing glucose-responsive systems, providing a useful approach for future GRI development.

Nanofiltration Membranes with Salt-Responsive Ion Valves for Enhanced Separation Performance in Brackish Water Treatment: A Battle against the Limitation of Salt Concentration

Utilizing brackish water resources has imposed a high requirement on the design and construction of nanofiltration membranes. To overcome the limitation of high salt concentration on the nanofiltration separation performance resulting from the weakened Donnan effect, a nanofiltration membrane with the effect of salt-responsive ion valves was developed by incorporating zwitterionic nanospheres into the polyamide layer (PA-ZNs). The interaction between the nanospheres and membranes at high salinity was revealed through a combination analysis from the perspectives of water transport model, positron annihilation spectroscopy, and solute rejection, contributing to the formation of the valve effect. The PA-ZNs membrane presented a breakthrough in overcoming the limitation of increased salt concentrations on nanofiltration separation performance, achieving a high selectivity of 105 for mono/multivalent anions. To reveal the role of the ion valve effect in ion transport through the membrane, the membrane conductance was determined at different salt concentrations, confirming channel-controlled transport at low salinity and ion valve-controlled transport at high salinity. Moreover, the main membrane separation mechanisms were systematically studied. The concept of salt-responsive ion valves may contribute to expanding the application of nanofiltration in brackish water treatment.

Communication Protocols Integrating Wearables, Ingestibles, and Implantables for Closed-Loop Therapies

Body-conformal sensors and tissue interfacing robotic therapeutics enable the real-time monitoring and treatment of diabetes, wound healing, and other critical conditions. By integrating sensors and drug delivery devices, scientists and engineers have developed closed-loop drug delivery systems with on-demand therapeutic capabilities to provide just-in-time treatments that correspond to chemical, electrical, and physical signals of a target morbidity. To enable closed-loop functionality in vivo, engineers utilize various low-power means of communication that reduce the size of implants by orders of magnitude, increase device lifetime from hours to months, and ensure the secure high-speed transfer of data. In this review, we highlight how communication protocols used to integrate sensors and drug delivery devices, such as radio frequency communication (e.g., Bluetooth, near-field communication), in-body communication, and ultrasound, enable improved treatment outcomes.

Dual-Conductive and Stiffness-Morphing Microneedle Patch Enables Continuous In Planta Monitoring of Electrophysiological Signal and Ion Fluctuation

The use of conductive microneedles presents a promising solution for achieving high-fidelity electrophysiological recordings with minimal impact on the interfaced tissue. However, a conventional metal-based microneedle suffers from high electrochemical impedance and mechanical mismatch. In this paper, we report a dual-conductive (i.e., both ionic and electronic conductive) and stiffness-morphing microneedle patch (DSMNP) for high-fidelity electrophysiological recordings with reduced tissue damage. The polymeric network of the DSMNP facilitates electrolyte absorption and therefore allows the transition of stiffness from 6.82 to 0.5139 N m-1. Furthermore, the nanoporous conductive polymer increases the specific electrochemical surface area after tissue penetration, resulting in an ultralow specific impedance of 893.13 Ω mm2 at 100 Hz. DSMNPs detect variation potential and action potential in real time and cation fluctuations in plants in response to environmental stimuli. After swelling, DSMNPs mechanically "lock" into biological tissues and prevent motion artifact by providing a stable interface. These results demonstrate the potential of DSMNPs for various applications in the field of plant physiology research and smart agriculture.