Fluid shear stress threshold regulates angiogenic sprouting

m6A Modification Mediates Endothelial Cell Responses to Oxidative Stress in Vascular Aging Induced by Low Fluid Shear Stress

N6-methyladenosine (m6A) is one of the most prevalent, abundant, and internal transcriptional modification and plays essential roles in diverse cellular and physiological processes. Low fluid shear stress (FSS) is a key pathological factor for many cardiovascular diseases, which directly forces on the endothelial cells of vessel walls. So far, the alterations and functions of m6A modifications in vascular endothelial cells at the low FSS are still unknown. Herein, we performed the transcriptome-wide m6A modification profiling of HUVECs at different FSS. We found that the m6A modifications were altered earlier and more sensitive than mRNA expressions in response to FSS. The low FSS increased the m6A modifications at CDS region but decreased the m6A modifications at 3' UTR region and regulated both the mRNA expressions and m6A modifications of the m6A regulators, such as the RBM15 and EIF3A. Functional annotations enriched by the hypermethylated and hypomethylated genes at low FSS revealed that the m6A modifications were clustered in the aging-related signaling pathways of mTOR, PI3K-AKT, insulin, and ERRB and in the oxidative stress-related transcriptional factors, such as HIF1A, NFAT5, and NFE2L2. Our study provided a pilot view of m6A modifications in vascular endothelial cells at low FSS and revealed that the m6A modifications driven by low FSS mediated the cellular responses to oxidative stress and cell aging, which suggested that the m6A modifications could be the potential targets for inhibiting vascular aging at pathological low FSS.

Pericytes and shear stress each alter the shape of a self-assembled vascular network

Blood vessel morphology is dictated by mechanical and biochemical cues. Flow-induced shear stress and pericytes both play important roles, and they have previously been studied using on-chip vascular networks to uncover their connection to angiogenic sprouting and network stabilization. However, it is unknown which shear stress values promote angiogenesis, how pericytes are directed to sprouts, and how shear stress and pericytes affect the overall vessel morphology. Here, we employed a microfluidic device to study these phenomena in three-dimensional (3D) self-assembled vasculature. Computational fluid dynamics solver (COMSOL) simulations indicated that sprouts form most frequently at locations of relatively low shear stresses (0.5-1.5 dyn cm^-2). Experimental results show that pericytes limit vascular diameter. Interestingly, when treated with imatinib or crenolanib, which are chemotherapeutic drugs and inhibitors of platelet-derived growth factor receptor β (PDGFRβ), the pericyte coverage of vessels decreased significantly but vessel diameter remained unchanged. This furthers our understanding of the mechanisms underlying vascular development and demonstrates the value of this microfluidic device in future studies on drug development and vascular biology.

Vascularized Tissue Organoids

Tissue organoids hold enormous potential as tools for a variety of applications, including disease modeling and drug screening. To effectively mimic the native tissue environment, it is critical to integrate a microvasculature with the parenchyma and stroma. In addition to providing a means to physiologically perfuse the organoids, the microvasculature also contributes to the cellular dynamics of the tissue model via the cells of the perivascular niche, thereby further modulating tissue function. In this review, we discuss current and developing strategies for vascularizing organoids, consider tissue-specific vascularization approaches, discuss the importance of perfusion, and provide perspectives on the state of the field.

In silico analysis of a hierarchical microfluidic vascular network: Detecting the location of angiogenic sprouting

Lack of oxygen is one of the leading causes of failure in engineered tissue. Therefore, angiogenesis will be necessary for the survival of larger tissues in vivo. In addition, a proper lymphatic system that plays an essential role in relieving inflammation and maintaining tissue homeostasis is of great importance for tissue regeneration and repair. Many biomechanical parameters are involved in controlling angiogenesis and capillary network generation, which are challenging to study and control in experimental studies or in vitro. In the present study, using numerical modeling, the effect of various geometric and biomechanical parameters in creating suitable conditions for angiogenesis was investigated. Furthermore, sprouting points were predicted using flow dynamics. For this purpose, a porous scaffold, flow channels with parametric geometry that followed Murray's law, and a drainage channel were considered. Results suggested that the geometry of the microfluidic channels and the characteristics of the vessel wall and scaffold plays a complementary role in determining the transmural pressure. It was found that a twofold increase in the vascular hydraulic conductivity can reduce the minimum transmural pressure by up to 28% and increase the drainage flow rate by 44%. In addition, the minimum magnitude of transmural pressure tends to zero for scaffold's hydraulic conductivity values smaller than 10^-11  m³ s kg^-1 . The results of this study can be used in optimizing the design of the relevant microfluidic systems to induce angiogenesis and avoid leakage in the constructed implantable tissue.

Chemotherapeutics and CAR-T Cell-Based Immunotherapeutics Screening on a 3D Bioprinted Vascularized Breast Tumor Model

Despite substantial advancements in development of cancer treatments, lack of standardized and physiologically-relevant in vitro testing platforms limit the early screening of anticancer agents. A major barrier is the complex interplay between the tumor microenvironment and immune response. To tackle this, a dynamic-flow based 3D bioprinted multi-scale vascularized breast tumor model, responding to chemo and immunotherapeutics is developed. Heterotypic tumors are precisely bioprinted at pre-defined distances from a perfused vasculature, exhibit tumor angiogenesis and cancer cell invasion into the perfused vasculature. Bioprinted tumors treated with varying dosages of doxorubicin for 72 h portray a dose-dependent drug response behavior. More importantly, a cell based immune therapy approach is explored by perfusing HER2-targeting chimeric antigen receptor (CAR) modified CD8+ T cells for 24 or 72 h. Extensive CAR-T cell recruitment to the endothelium, substantial T cell activation and infiltration to the tumor site, resulted in up to ≈70% reduction in tumor volumes. The presented platform paves the way for a robust, precisely fabricated, and physiologically-relevant tumor model for future translation of anti-cancer therapies to personalized medicine.

Engineered Biomimetic Membranes for Organ-on-a-Chip

Organ-on-a-chip (OOC) systems are engineered nanobiosystems to mimic the physiochemical environment of a specific organ in the body. Among various components of OOC systems, biomimetic membranes have been regarded as one of the most important key components to develop controllable biomimetic bioanalysis systems. Here, we review the preparation and characterization of biomimetic membranes in comparison with the features of the extracellular matrix. After that, we review and discuss the latest applications of engineered biomimetic membranes to fabricate various organs on a chip, such as liver, kidney, intestine, lung, skin, heart, vasculature and blood vessels, brain, and multiorgans with perspectives for further biomedical applications.

Organ-on-a-chip: Its use in cardiovascular research

Organ-on-a-chip (OOAC) has attracted great attention during the last decade as a revolutionary alternative to conventional animal models. This cutting-edge technology has also brought constructive changes to the field of cardiovascular research. The cardiovascular system, especially the heart as a well-protected vital organ, is virtually impossible to replicate in vitro with conventional approaches. This made scientists assume that they needed to use animal models for cardiovascular research. However, the frequent failure of animal models to correctly reflect the native cardiovascular system necessitated a search for alternative platforms for preclinical studies. Hence, as a promising alternative to conventional animal models, OOAC technology is being actively developed and tested in a wide range of biomedical fields, including cardiovascular research. Therefore, in this review, the current literature on the use of OOACs for cardiovascular research is presented with a focus on the basis for using OOACs, and what has been specifically achieved by using OOACs is also discussed. By providing an overview of the current status of OOACs in cardiovascular research and its future perspectives, we hope that this review can help to develop better and optimized research strategies for cardiovascular diseases (CVDs) as well as identify novel applications of OOACs in the near future.

Exploring Endothelial Expansion on a Chip

Angiogenesis is the development of new blood vessels from the existing vasculature. Its malfunction leads to the development of cancers and cardiovascular diseases qualified by the WHO as a leading cause of death worldwide. A better understanding of mechanisms regulating physiological and pathological angiogenesis will potentially contribute to developing more effective treatments for those urgent issues. Therefore, the main goal of the following study was to design and manufacture an angiogenesis-on-a-chip microplatform, including cylindrical microvessels created by Viscous Finger Patterning (VFP) technique and seeded with HUVECs. While optimizing the VFP procedure, we have observed that lumen's diameter decreases with a diminution of the droplet's volume. The influence of Vascular Endothelial Growth Factor (VEGF) with a concentration of 5, 25, 50, and 100 ng/mL on the migration of HUVECs was assessed. VEGF's solution with concentrations varying from 5 to 50 ng/mL reveals high angiogenic potential. The spatial arrangement of cells and their morphology were visualized by fluorescence and confocal microscopy. Migration of HUVECs toward loaded angiogenic stimuli has been initiated after overnight incubation. This research is the basis for developing more complex vascularized multi-organ-on-a-chip microsystems that could potentially be used for drug screening.

Mechanical regulation of the early stages of angiogenesis

Favouring or thwarting the development of a vascular network is essential in fields as diverse as oncology, cardiovascular disease or tissue engineering. As a result, understanding and controlling angiogenesis has become a major scientific challenge. Mechanical factors play a fundamental role in angiogenesis and can potentially be exploited for optimizing the architecture of the resulting vascular network. Largely focusing on in vitro systems but also supported by some in vivo evidence, the aim of this Highlight Review is dual. First, we describe the current knowledge with particular focus on the effects of fluid and solid mechanical stimuli on the early stages of the angiogenic process, most notably the destabilization of existing vessels and the initiation and elongation of new vessels. Second, we explore inherent difficulties in the field and propose future perspectives on the use of in vitro and physics-based modelling to overcome these difficulties.

Recombinant human plasma gelsolin reverses increased permeability of the blood-brain barrier induced by the spike protein of the SARS-CoV-2 virus

BACKGROUND

Plasma gelsolin (pGSN) is an important part of the blood actin buffer that prevents negative consequences of possible F-actin deposition in the microcirculation and has various functions during host immune response. Recent reports reveal that severe COVID-19 correlates with reduced levels of pGSN. Therefore, using an in vitro system, we investigated whether pGSN could attenuate increased permeability of the blood-brain barrier (BBB) during its exposure to the portion of the SARS-CoV-2 spike protein containing the receptor binding domain (S1 subunit).

MATERIALS AND METHODS

Two- and three-dimensional models of the human BBB were constructed using the human cerebral microvascular endothelial cell line hCMEC/D3 and exposed to physiologically relevant shear stress to mimic perfusion in the central nervous system (CNS). Trans-endothelial electrical resistance (TEER) as well as immunostaining and Western blotting of tight junction (TJ) proteins assessed barrier integrity in the presence of the SARS-CoV-2 spike protein and pGSN. The IncuCyte Live Imaging system evaluated the motility of the endothelial cells. Magnetic bead-based ELISA was used to determine cytokine secretion. Additionally, quantitative real-time PCR (qRT-PCR) revealed gene expression of proteins from signaling pathways that are associated with the immune response.

RESULTS

pGSN reversed S1-induced BBB permeability in both 2D and 3D BBB models in the presence of shear stress. BBB models exposed to pGSN also exhibited attenuated pro-inflammatory signaling pathways (PI3K, AKT, MAPK, NF-κB), reduced cytokine secretion (IL-6, IL-8, TNF-α), and increased expression of proteins that form intercellular TJ (ZO-1, occludin, claudin-5).

CONCLUSION

Due to its anti-inflammatory and protective effects on the brain endothelium, pGSN has the potential to be an alternative therapeutic target for patients with severe SARS-CoV-2 infection, especially those suffering neurological complications of COVID-19.

On the role of mechanical signals on sprouting angiogenesis through computer modeling approaches

Sprouting angiogenesis, the formation of new vessels from preexisting vasculature, is an essential process in the regeneration of new tissues as well as in the development of some diseases like cancer. Although early studies identified chemical signaling as the main driver of this process, many recent studies have shown a strong role of mechanical signals in the formation of new capillaries. Different types of mechanical signals (e.g., external forces, cell traction forces, and blood flow-induced shear forces) have been shown to play distinct roles in the process; however, their interplay remains still largely unknown. During the last decades, mathematical and computational modeling approaches have been developed to investigate and better understand the mechanisms behind mechanically driven angiogenesis. In this manuscript, we review computational models of angiogenesis with a focus on models investigating the role of mechanics on the process. Our aim is not to provide a detailed review on model methodology but to describe what we have learnt from these models. We classify models according to the mechanical signals being investigated and describe how models have looked into their role on the angiogenic process. We show that a better understanding of the mechanobiology of the angiogenic process will require the development of computer models that incorporate the interactions between the multiple mechanical signals and their effect on cellular responses, since they all seem to play a key in sprout patterning. In the end, we describe some of the remaining challenges of computational modeling of angiogenesis and discuss potential avenues for future research.

A Transwell-Based Vascularized Model to Investigate the Effect of Interstitial Flow on Vasculogenesis

Interstitial flow plays a significant role in vascular system development, mainly including angiogenesis and vasculogenesis. However, compared to angiogenesis, the effect of interstitial flow on vasculogenesis is less explored. Current in vitro models for investigating the effect of interstitial flow on vasculogenesis heavily rely on microfluidic chips, which require microfluidic expertise and facilities, and may not be accessible to biological labs. Here, we proposed a facile approach to building perfusable vascular networks through the self-assembly of endothelial cells in a modified transwell format and investigated the effect of interstitial flow on vasculogenesis. We found that the effect of interstitial flow on vasculogenesis was closely related to the existence of VEGF and fibroblasts in the developed model: (1) In the presence of fibroblasts, interstitial flow (within the range of 0.1-0.6 μm/s) facilitated the perfusability of the engineered vasculatures. Additional VEGF in the culture medium further worked synergically with interstitial flow to develop longer, wider, denser, and more perfusable vasculatures than static counterparts; (2) In the absence of fibroblasts, vasculatures underwent severe regression within 7 days under static conditions. However, interstitial flow greatly inhibited vessel regression and enhanced vascular perfusability and morphogenesis without the need for additional VEGF. These results revealed that the effect of interstitial flow might vary depending on the existence of VEGF and fibroblasts, and would provide some guidelines for constructing in vitro self-assembled vasculatures. The established transwell-based vascularized model provides a simple method to build perfusable vasculatures and could also be utilized for creating functional tissues in regenerative medicine.

Recent advancements and future requirements in vascularization of cortical organoids

The fields of tissue engineering and disease modeling have become increasingly cognizant of the need to create complex and mature structures in vitro to adequately mimic the in vivo niche. Specifically for neural applications, human brain cortical organoids (COs) require highly stratified neurons and glial cells to generate synaptic functions, and to date, most efforts achieve only fetal functionality at best. Moreover, COs are usually avascular, inducing the development of necrotic cores, which can limit growth, development, and maturation. Recent efforts have attempted to vascularize cortical and other organoid types. In this review, we will outline the components of a fully vascularized CO as they relate to neocortical development in vivo. These components address challenges in recapitulating neurovascular tissue patterning, biomechanical properties, and functionality with the goal of mirroring the quality of organoid vascularization only achieved with an in vivo host. We will provide a comprehensive summary of the current progress made in each one of these categories, highlighting advances in vascularization technologies and areas still under investigation.

Peptide Lv augments intermediate-conductance calcium-dependent potassium channels (KCa3.1) in endothelial cells to promote angiogenesis

Peptide Lv is a small endogenous secretory peptide that is expressed in various tissues and conserved across different species. Patients with diabetic retinopathy, an ocular disease with pathological angiogenesis, have upregulated peptide Lv in their retinas. The pro-angiogenic activity of peptide Lv is in part through promoting vascular endothelial cell (EC) proliferation, migration, and sprouting, but its molecular mechanism is not completely understood. This study aimed to decipher how peptide Lv promotes EC-dependent angiogenesis by using patch-clamp electrophysiological recordings, Western immunoblotting, quantitative PCR, and cell proliferation assays in cultured ECs. Endothelial cells treated with peptide Lv became significantly hyperpolarized, an essential step for EC activation. Treatment with peptide Lv augmented the expression and current densities of the intermediate-conductance calcium-dependent potassium (KCa3.1) channels that contribute to EC hyperpolarization but did not augment other potassium channels. Blocking KCa3.1 attenuated peptide Lv-elicited EC proliferation. These results indicate that peptide Lv-stimulated increases of functional KCa3.1 in ECs contributes to EC activation and EC-dependent angiogenesis.

Interstitial flow promotes the formation of functional microvascular networks in vitro through upregulation of matrix metalloproteinase-2

Self-organized microvascular networks (MVNs) have become key to the development of many microphysiological models. However, the self-organizing nature of this process combined with variations between types or batches of endothelial cells (ECs) often lead to inconsistency or failure to form functional MVNs. Since interstitial flow (IF) has been reported to play a beneficial role in angiogenesis, vasculogenesis, and 3D capillary morphogenesis, we systematically investigated the role IF plays during neovessel formation in a customized single channel microfluidic chip for which IF has been fully characterized. Compared to static conditions, MVNs formed under IF have higher vessel density and diameters and greater network perfusability. Through a series of inhibitory experiments, we demonstrated that IF treatment improves vasculogenesis by ECs through upregulation of matrix metalloproteinase-2 (MMP-2). We then successfully implemented a novel strategy involving the interplay between IF and MMP-2 inhibitor to regulate morphological parameters of the self-organized MVNs, with vascular permeability and perfusability well maintained. The revealed mechanism and proposed methodology were further validated with a brain MVN model. Our findings and methods have the potential to be widely utilized to boost the development of various organotypic MVNs and could be incorporated into related bioengineering applications where perfusable vasculature is desired.

Microfluidics in vascular biology research: a critical review for engineers, biologists, and clinicians

Neovascularization, the formation of new blood vessels, has received much research attention due to its implications for physiological processes and diseases. Most studies using traditional in vitro and in vivo platforms find challenges in recapitulating key cellular and mechanical cues of the neovascularization processes. Microfluidic in vitro models have been presented as an alternative to these limitations due to their capacity to leverage microscale physics to control cell organization and integrate biochemical and mechanical cues, such as shear stress, cell-cell interactions, or nutrient gradients, making them an ideal option for recapitulating organ physiology. Much has been written about the use of microfluidics in vascular biology models from an engineering perspective. However, a review introducing the different models, components and progress for new potential adopters of these technologies was absent in the literature. Therefore, this paper aims to approach the use of microfluidic technologies in vascular biology from a perspective of biological hallmarks to be studied and written for a wide audience ranging from clinicians to engineers. Here we review applications of microfluidics in vascular biology research, starting with design considerations and fabrication techniques. After that, we review the state of the art in recapitulating angiogenesis and vasculogenesis, according to the hallmarks recapitulated and complexity of the models. Finally, we discuss emerging research areas in neovascularization, such as drug discovery, and potential future directions.

Pathological Roles of Oxidative Stress in Cardiac Microvascular Injury

Cardiac microvascular injury can be a fundamental pathological process that causes high incidence cardiovascular diseases such heart failure, diabetic cardiomyopathy, and hypertension. It is also an independent risk factor for cardiovascular disease. Oxidative stress is a significant pathological process in which the body interferes with the balance of the endogenous antioxidant defense system by producing reactive oxygen species, leading to property changes and dysfunction. It has been demonstrated that oxidative stress is one of the major causes of cardiac microvascular disease. Therefore, additional investigation into the relationship between oxidative stress and cardiac microvascular injury will direct clinical management in the future. In order to give suggestions and support for future in-depth studies, we give a basic overview of the cardiac microvasculature in relation to physiopathology in this review. We also summarize the role of oxidative stress of mitochondrial and non-mitochondrial origin in cardiac microvascular injury and related drug studies.

ARHGEF18 participates in Endothelial Cell Mechano-sensitivity in Response to Flow.. [DOI: 10.1101/2022.09.10.507283] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Hemodynamic forces play an important role in vascular network development and homeostasis. In physiological condition, shear stress generated by laminar flow promotes endothelial cells (EC) health and induces their alignment in the direction of flow. In contrast, altered hemodynamic forces induce endothelial dysfunction and lead to the development of vascular disorders such as atherosclerosis and aneurysms. Following mechano-sensor activation, Rho protein-mediated cytoskeletal rearrangement is one of the first steps in transforming flow-induced forces into intracellular signals in EC via guanine nucleotide exchange factors (RhoGEFs) that mediate the spatio-temporal activation of these Rho proteins. Here we identified ARHGEF18 as a flow-sensitive RhoGEF specifically activating RhoA. Both ARHGEF18 expression and activity were controlled by shear stress level. ARHGEF18 promotes EC adhesion, focal adhesion formation and migration. ARHGEF18 localized to the tight junction by interacting with ZO-1 and participated to shear stress-induced EC elongation and alignment via its nucleotide exchange activity and the activation of p38 MAPK. Our study therefore characterized ARHGEF18 as the first flow-sensitive RhoA GEF in ECs, whose activity is essential for the maintenance of intercellular junctions and a properly organized endothelial monolayer under physiological flow conditions.

Mechanical regulation of signal transduction in angiogenesis

Biophysical and biochemical cues work in concert to regulate angiogenesis. These cues guide angiogenesis during development and wound healing. Abnormal cues contribute to pathological angiogenesis during tumor progression. In this review, we summarize the known signaling pathways involved in mechanotransduction important to angiogenesis. We discuss how variation in the mechanical microenvironment, in terms of stiffness, ligand availability, and topography, can modulate the angiogenesis process. We also present an integrated view on how mechanical perturbations, such as stretching and fluid shearing, alter angiogenesis-related signal transduction acutely, leading to downstream gene expression. Tissue engineering-based approaches to study angiogenesis are reviewed too. Future directions to aid the efforts in unveiling the comprehensive picture of angiogenesis are proposed.

Upscaling human mesenchymal stromal cell production in a novel vertical-wheel bioreactor enhances extracellular vesicle secretion and cargo profile

Human mesenchymal stromal cells (hMSCs) are mechanically sensitive undergoing phenotypic alterations when subjected to shear stress, cell aggregation, and substrate changes encountered in 3D dynamic bioreactor cultures. However, little is known about how bioreactor microenvironment affects the secretion and cargo profiles of hMSC-derived extracellular vesicles (EVs) including the subset, "exosomes", which contain therapeutic proteins, nucleic acids, and lipids from the parent cells. In this study, bone marrow-derived hMSCs were expanded on 3D Synthemax II microcarriers in the PBS mini 0.1L Vertical-Wheel bioreactor system under variable shear stress levels at 25, 40, and 64 RPM (0.1-0.3 dyn/cm²). The bioreactor system promotes EV secretion from hMSCs by 2.5-fold and upregulates the expression of EV biogenesis markers and glycolysis genes compared to the static 2D culture. The microRNA cargo was also altered in the EVs from bioreactor culture including the upregulation of miR-10, 19a, 19b, 21, 132, and 377. EV protein cargo was characterized by proteomics analysis, showing upregulation of metabolic, autophagy and ROS-related proteins comparing with 2D cultured EVs. In addition, the scalability of the Vertical-Wheel bioreactor system was demonstrated in a 0.5L bioreactor, showing similar or better hMSC-EV secretion and cargo content compared to the 0.1L bioreactor. This study advances our understanding of bio-manufacturing of stem cell-derived EVs for applications in cell-free therapy towards treating neurological disorders such as ischemic stroke, Alzheimer's disease, and multiple sclerosis.

Recent advances in bioprinting using silk protein-based bioinks

3D printing has experienced swift growth for biological applications in the field of regenerative medicine and tissue engineering. Essential features of bioprinting include determining the appropriate bioink, printing speed mechanics, and print resolution while also maintaining cytocompatibility. However, the scarcity of bioinks that provide printing and print properties and cell support remains a limitation. Silk Fibroin (SF) displays exceptional features and versatility for inks and shows the potential to print complex structures with tunable mechanical properties, degradation rates, and cytocompatibility. Here we summarize recent advances and needs with the use of SF protein from Bombyx mori silkworm as a bioink, including crosslinking methods for extrusion bioprinting using SF and the maintenance of cell viability during and post bioprinting. Additionally, we discuss how encapsulated cells within these SF-based 3D bioprinted constructs are differentiated into various lineages such as skin, cartilage, and bone to expedite tissue regeneration. We then shift the focus towards SF-based 3D printing applications, including magnetically decorated hydrogels, in situ bioprinting, and a next-generation 4D bioprinting approach. Future perspectives on improvements in printing strategies and the use of multicomponent bioinks to improve print fidelity are also discussed.

Oxygen gradients dictate angiogenesis but not barriergenesis in a 3D brain microvascular model

A variety of biophysical properties are known to regulate angiogenic sprouting, and in vitro systems can parse the individual effects of these factors in a controlled setting. Here, a three-dimensional brain microvascular model interrogates how variables including extracellular matrix composition, fluid shear stress, and radius of curvature affect angiogenic sprouting of cerebral endothelial cells. Tracking endothelial migration over several days reveals that application of fluid shear stress and enlarged vessel radius of curvature both attenuate sprouting. Computational modeling informed by oxygen consumption assays suggests that sprouting correlates to reduced oxygen concentration: both fluid shear stress and vessel geometry alter the local oxygen levels dictated by both ambient conditions and cellular respiration. Moreover, increasing cell density and consequently lowering the local oxygen levels yields significantly more sprouting. Further analysis reveals that the magnitude of oxygen concentration is not as important as its spatial concentration gradient: decreasing ambient oxygen concentration causes significantly less sprouting than applying an external oxygen gradient to the vessels. In contrast, barriergenesis is dictated by shear stress independent of local oxygen concentrations, suggesting that different mechanisms mediate angiogenesis and barrier formation and that angiogenic sprouting can occur without compromising the barrier. Overall, these results improve our understanding of how specific biophysical variables regulate the function and activation of cerebral vasculature, and identify spatial oxygen gradients as the driving factor of angiogenesis in the brain.

Design of an Integrated Microvascularized Human Skin-on-a-Chip Tissue Equivalent Model

Tissue-engineered skin constructs have been under development since the 1980s as a replacement for human skin tissues and animal models for therapeutics and cosmetic testing. These have evolved from simple single-cell assays to increasingly complex models with integrated dermal equivalents and multiple cell types including a dermis, epidermis, and vasculature. The development of micro-engineered platforms and biomaterials has enabled scientists to better recreate and capture the tissue microenvironment in vitro, including the vascularization of tissue models and their integration into microfluidic chips. However, to date, microvascularized human skin equivalents in a microfluidic context have not been reported. Here, we present the design of a novel skin-on-a-chip model integrating human-derived primary and immortalized cells in a full-thickness skin equivalent. The model is housed in a microfluidic device, in which a microvasculature was previously established. We characterize the impact of our chip design on the quality of the microvascular networks formed and evidence that this enables the formation of more homogenous networks. We developed a methodology to harvest tissues from embedded chips, after 14 days of culture, and characterize the impact of culture conditions and vascularization (including with pericyte co-cultures) on the stratification of the epidermis in the resulting skin equivalents. Our results indicate that vascularization enhances stratification and differentiation (thickness, architecture, and expression of terminal differentiation markers such as involucrin and transglutaminase 1), allowing the formation of more mature skin equivalents in microfluidic chips. The skin-on-a-chip tissue equivalents developed, because of their realistic microvasculature, may find applications for testing efficacy and safety of therapeutics delivered systemically, in a human context.

A Review of Functional Analysis of Endothelial Cells in Flow Chambers

The vascular endothelial cells constitute the innermost layer. The cells are exposed to mechanical stress by the flow, causing them to express their functions. To elucidate the functions, methods involving seeding endothelial cells as a layer in a chamber were studied. The chambers are known as parallel plate, T-chamber, step, cone plate, and stretch. The stimulated functions or signals from endothelial cells by flows are extensively connected to other outer layers of arteries or organs. The coculture layer was developed in a chamber to investigate the interaction between smooth muscle cells in the middle layer of the blood vessel wall in vascular physiology and pathology. Additionally, the microfabrication technology used to create a chamber for a microfluidic device involves both mechanical and chemical stimulation of cells to show their dynamics in in vivo microenvironments. The purpose of this study is to summarize the blood flow (flow inducing) for the functions connecting to endothelial cells and blood vessels, and to find directions for future chamber and device developments for further understanding and application of vascular functions. The relationship between chamber design flow, cell layers, and microfluidics was studied.

A Challenge for Engineering Biomimetic Microvascular Models: How do we Incorporate the Physiology?

The gap between in vitro and in vivo assays has inspired biomimetic model development. Tissue engineered models that attempt to mimic the complexity of microvascular networks have emerged as tools for investigating cell-cell and cell-environment interactions that may be not easily viewed in vivo. A key challenge in model development, however, is determining how to recreate the multi-cell/system functional complexity of a real network environment that integrates endothelial cells, smooth muscle cells, vascular pericytes, lymphatics, nerves, fluid flow, extracellular matrix, and inflammatory cells. The objective of this mini-review is to overview the recent evolution of popular biomimetic modeling approaches for investigating microvascular dynamics. A specific focus will highlight the engineering design requirements needed to match physiological function and the potential for top-down tissue culture methods that maintain complexity. Overall, examples of physiological validation, basic science discoveries, and therapeutic evaluation studies will emphasize the value of tissue culture models and biomimetic model development approaches that fill the gap between in vitro and in vivo assays and guide how vascular biologists and physiologists might think about the microcirculation.

Engineering the multiscale complexity of vascular networks

The survival of vertebrate organisms depends on highly regulated delivery of oxygen and nutrients through vascular networks that pervade nearly all tissues in the body. Dysregulation of these vascular networks is implicated in many common human diseases such as hypertension, coronary artery disease, diabetes and cancer. Therefore, engineers have sought to create vascular networks within engineered tissues for applications such as regenerative therapies, human disease modelling and pharmacological testing. Yet engineering vascular networks has historically remained difficult, owing to both incomplete understanding of vascular structure and technical limitations for vascular fabrication. This Review highlights the materials advances that have enabled transformative progress in vascular engineering by ushering in new tools for both visualizing and building vasculature. New methods such as bioprinting, organoids and microfluidic systems are discussed, which have enabled the fabrication of 3D vascular topologies at a cellular scale with lumen perfusion. These approaches to vascular engineering are categorized into technology-driven and nature-driven approaches. Finally, the remaining knowledge gaps, emerging frontiers and opportunities for this field are highlighted, including the steps required to replicate the multiscale complexity of vascular networks found in nature.

[Effects of transient receptor potential vanilloid type 4-specific activator on human vascular endothelial cell functions and blood supply of rat perforator flap and its mechanism]

Objective: To analyze the effects of transient receptor potential vanilloid type 4 (TRPV4) activation on the function and endothelial-to-mesenchymal transition (EndMT) of human umbilical vein endothelial cells (HUVECs), as well as to explore the effects of TRPV4 activation on blood perfusion and survival of rat perforator flap and the mechanism. Methods: The experimental research methods were used. The 3rd to 6th passages of HUVECs were used for experiments and divided into 0.5 μmol/L 4α-phorbol 12, 13-didecanoate (4αPDD) group, 1.0 μmol/L 4αPDD group, 3.0 μmol/L 4αPDD group, 10.0 μmol/L 4αPDD group, and phosphate buffer solution (PBS) group, which were cultivated in corresponding final molarity of 4αPDD and PBS, respectively. The cell proliferation activity at 6 and 12 h of culture was detected using cell counting kit-8 (CCK-8). Another batch of cells was acquired and divided into PBS group, 1 μmol/L 4αPDD group, and 3 μmol/L 4αPDD group, which were treated similarly as described before and then detected for cell proliferation activity at 6, 12, 24, and 48 h of culture. The residual scratch area of cells at post scratch hour (PSH) 12, 24, and 48 was detected by scratch test, and the percentage of the residual scratch area was calculated. The number of migrated cells at 24 and 48 h of culture was detected by Transwell experiment. The tube-formation assay was used to measure the number of tubular structures at 4 and 8 h of culture. The protein expressions of E-cadherin, N-cadherin, Slug, and Snail at 24 h of culture were detected by Western blotting. All the sample numbers in each group at each time point in vitro experiments were 3. A total of 36 male Sprague-Dawley rats aged 8 to 10 weeks were divided into delayed flap group, 4αPDD group, and normal saline group according to the random number table, with 12 rats in each group, and iliolumbar artery perforator flap models on the back were constructed. The flap surgical delay procedure was only performed in the rats in delayed flap group one week before the flap transfer surgery. Neither rats in 4αPDD group nor normal saline group had flap surgical delay; instead, they were intraperitoneally injected with 4αPDD and an equivalent mass of normal saline, respectively, at 10 min before, 24 h after, and 48 h after the surgery. The general state of flap was observed on post surgery day (PSD) 0 (immediately), 1, 4, and 7. The flap survival rates were assessed on PSD 7. The flap blood perfusion was detected by laser speckle contrast imaging technique on PSD 1, 4, and 7. The microvascular density in the flap's choke vessel zone was detected by immunohistochemical staining. All the sample numbers in each group at each time point in vivo experiments were 12. Data were statistically analyzed with analysis of variance for factorial design, analysis of variance for repeated measurement, one-way analysis of variance, least significant difference t test, and Bonferroni correction. Results: At 6 and 12 h of culture, there were no statistically significant differences in cell proliferation activity in the overall comparison among PBS group, 0.5 μmol/L 4αPDD group, 1.0 μmol/L 4αPDD group, 3.0 μmol/L 4αPDD group, and 10.0 μmol/L 4αPDD group (P>0.05). At 6, 12, 24, and 48 h of culture, there were no statistically significant differences in cell proliferation activity in the overall comparison among PBS group, 1 μmol/L 4αPDD group, and 3 μmol/L 4αPDD group (P>0.05). At PSH 12, the percentages of the residual scratch area of cells in 1 μmol/L 4αPDD group and 3 μmol/L 4αPDD group were close to that in PBS group (P>0.05). At PSH 24 and 48, compared with those in PBS group, the percentages of the residual scratch area of cells in 3 μmol/L 4αPDD group were significantly decreased (with t values of 2.83 and 2.79, respectively, P<0.05), while the percentages of the residual scratch area of cells in 1 μmol/L 4αPDD group showed no significant differences (P>0.05). At 24 h of culture, the number of migrated cells in 1 μmol/L 4αPDD group and 3 μmol/L 4αPDD group were close to that in PBS group (P>0.05). At 48 h of culture, the number of migrated cells in 1 μmol/L 4αPDD group and 3 μmol/L 4αPDD groups were significantly greater than that in PBS group (with t values of 6.20 and 9.59, respectively, P<0.01). At 4 h of culture, the numbers of tubular structures of cells in 1 μmol/L 4αPDD group and 3 μmol/L 4αPDD group were significantly greater than that in PBS group (with t values of 4.68 and 4.95, respectively, P<0.05 or <0.01). At 8 h of culture, the numbers of tubular structures of cells in 1 μmol/L 4αPDD and 3 μmol/L 4αPDD groups were similar to that in PBS group (P>0.05). At 24 h of culture, compared with those in PBS group, the protein expression level of E-cadherin of cells in 3 μmol/L 4αPDD group was significantly decreased (t=5.13, P<0.01), whereas there was no statistically significant difference in the protein expression level of E-cadherin of cells in 1 μmol/L 4αPDD group (P>0.05); the protein expression level of N-cadherin of cells in 3 μmol/L 4αPDD group was significantly increased (t=4.93, P<0.01), whereas there was no statistically significant difference in the protein expression level of N-cadherin of cells in 1 μmol/L 4αPDD group (P>0.05); the protein expression levels of Slug of cells in 1 μmol/L 4αPDD group and 3 μmol/L 4αPDD group were significantly increased (with t values of 3.85 and 6.52, respectively, P<0.05 or P<0.01); and the protein expression level of Snail of cells in 3 μmol/L 4αPDD group was significantly increased (t=4.08, P<0.05), whereas there was no statistically significant difference in the protein expression level of Snail of cells in 1 μmol/L 4αPDD group (P>0.05). There were no statistically significant differences in the protein expression levels of E-cadherin, N-cadherin, Slug, or Snail of cells between 1 μmol/L 4αPDD group and 3 μmol/L 4αPDD group (P>0.05). The general condition of flaps of rats in the three groups was good on PSD 0. On PSD 1, the flaps of rats in the three groups were basically similar, with bruising and swelling at the distal end. On PSD 4, the swelling of flaps of rats in the three groups subsided, and the distal end turned dark brown and necrosis occurred, with the area of necrosis in flaps of rats in normal saline group being larger than the areas in 4αPDD group and delayed flap group. On PSD 7, the necrotic areas of flaps of rats in the 3 groups were fairly stable, with the area of necrosis at the distal end of flap of rats in delayed flap group being the smallest. On PSD 7, the flap survival rates of rats in 4αPDD group ((80±13)%) and delayed flap group ((87±9)%) were similar (P>0.05), and both were significantly higher than (70±11)% in normal saline group (with t values of 2.24 and 3.65, respectively, P<0.05 or P<0.01). On PSD 1, the overall blood perfusion signals of rats in the 3 groups were basically the same, and the blood perfusion signals in the choke vessel zone were relatively strong, with a certain degree of underperfusion at the distal end. On PSD 4, the boundary between the surviving and necrotic areas of flaps of rats in the 3 groups became evident, and the blood perfusion signals in the choke vessel zone were improved, with the normal saline group's distal hypoperfused area of flap being larger than the areas in delayed flap group and 4αPDD group. On PSD 7, the blood perfusion signals of overall flap of rats had generally stabilized in the 3 groups, with the intensity of blood perfusion signal in the choke vessel zone and overall flap of rats in delayed flap group and 4αPDD group being significantly greater than that in normal saline group. On PSD 7, the microvascular density in the choke vessel zone of flap of rats in 4αPDD group and delayed flap group were similar (P>0.05), and both were significantly higher than that in normal saline group (with t values of 4.11 and 5.38, respectively, P<0.01). Conclusions: After activation, TRPV4 may promote the migration and tubular formation of human vascular endothelial cells via the EndMT pathway, leading to the enhanced blood perfusion of perforator flap and microvascular density in the choke vessel zone, and therefore increase the flap survival rate.

Emerging tissue engineering strategies for the corneal regeneration

Cornea as the outermost layer of the eye is at risk of various genetic and environmental diseases that can damage the cornea and impair vision. Corneal transplantation is among the most applicable surgical procedures for repairing the defected tissue. However, the scarcity of healthy tissue donations as well as transplantation failure has remained as the biggest challenges in confront of corneal grafting. Therefore, alternative approaches based on stem-cell transplantation and classic regenerative medicine have been developed for corneal regeneration. In this review, the application and limitation of the recently-used advanced approaches for regeneration of cornea are discussed. Additionally, other emerging powerful techniques such as 5D printing as a new branch of scaffold-based technologies for construction of tissues other than the cornea are highlighted and suggested as alternatives for corneal reconstruction. The introduced novel techniques may have great potential for clinical applications in corneal repair including disease modeling, 3D pattern scheming, and personalized medicine.

Mechanical loading of intraluminal pressure mediates wound angiogenesis by regulating the TOCA family of F-BAR proteins

Angiogenesis is regulated in coordinated fashion by chemical and mechanical cues acting on endothelial cells (ECs). However, the mechanobiological mechanisms of angiogenesis remain unknown. Herein, we demonstrate a crucial role of blood flow-driven intraluminal pressure (IP) in regulating wound angiogenesis. During wound angiogenesis, blood flow-driven IP loading inhibits elongation of injured blood vessels located at sites upstream from blood flow, while downstream injured vessels actively elongate. In downstream injured vessels, F-BAR proteins, TOCA1 and CIP4, localize at leading edge of ECs to promote N-WASP-dependent Arp2/3 complex-mediated actin polymerization and front-rear polarization for vessel elongation. In contrast, IP loading expands upstream injured vessels and stretches ECs, preventing leading edge localization of TOCA1 and CIP4 to inhibit directed EC migration and vessel elongation. These data indicate that the TOCA family of F-BAR proteins are key actin regulatory proteins required for directed EC migration and sense mechanical cell stretching to regulate wound angiogenesis.

Chemical and mechanical cues coordinately regulate angiogenesis. Here, the authors show that blood flow-driven intraluminal pressure regulates wound angiogenesis. Findings indicate that TOCA family of F-BAR proteins act as actin regulators required for endothelial cell migration and sense mechanical cell stretching to regulate wound angiogenesis.

Human dermal microvascular endothelial cell morphological response to fluid shear stress

As the cells that line the vasculature, endothelial cells are continually exposed to fluid shear stress by blood flow. Recent studies suggest that the morphological response of endothelial cells to fluid shear stress depends on the endothelial cell type. Thus, the present study characterizes the morphological response of human dermal microvascular endothelial cells (HMEC-1) and nuclei to steady, laminar, and unidirectional fluid shear stress. Cultured HMEC-1 monolayers were exposed to shear stress of 0.3 dyn/cm², 16 dyn/cm², or 32 dyn/cm² for 72 h with hourly live-cell imaging capturing both the nuclear and cellular morphology. Despite changes in elongation and alignment occurring with increasing fluid shear stress, there was a lack of elongation and alignment over time under each fluid shear stress condition. Conversely, changes in cellular and nuclear area exhibited dependence on both time and fluid shear stress magnitude. The trends in cellular morphology differed at shear stress levels above and below 16 dyn/cm², whereas the nuclear orientation was independent of fluid shear stress magnitude. These findings show the complex morphological response of HMEC-1 to fluid shear stress.

Immunoengineering strategies to enhance vascularization and tissue regeneration

Immune cells have emerged as powerful regulators of regenerative as well as pathological processes. The vast majority of regenerative immunoengineering efforts have focused on macrophages; however, growing evidence suggests that other cells of both the innate and adaptive immune system are as important for successful revascularization and tissue repair. Moreover, spatiotemporal regulation of immune cells and their signaling have a significant impact on the regeneration speed and the extent of functional recovery. In this review, we summarize the contribution of different types of immune cells to the healing process and discuss ways to manipulate and control immune cells in favor of vascularization and tissue regeneration. In addition to cell delivery and cell-free therapies using extracellular vesicles, we discuss in situ strategies and engineering approaches to attract specific types of immune cells and modulate their phenotypes. This field is making advances to uncover the extraordinary potential of immune cells and their secretome in the regulation of vascularization and tissue remodeling. Understanding the principles of immunoregulation will help us design advanced immunoengineering platforms to harness their power for tissue regeneration.

Hydrostatic pressure stimulates the osteogenesis and angiogenesis of MSCs/HUVECs co-culture on porous PLGA scaffolds

In native bone tissue regeneration, blood vessels, providing oxygen and nutrition for tissues, can promote the regeneration of bone and accelerate the repair of a defected area. In this study, Poly(D, L-lactic-co-glycolic acid) (PLGA) inverse opal scaffolds with high pore interconnectivity were fabricated and further modified with vascular endothelial growth factor (VEGF). The rat bone marrow derived mesenchymal stem cells (rMSCs) and human umbilical vein endothelial cells (HUVECs) were co-cultured onto the scaffolds to enhance vascularization for bone tissue regeneration. Cell attachment, viability, proliferation, and morphology were detected by cell counting kit-8 (CCK-8) assay, live and dead staining and scanning electron microscopy (SEM). Hydrostatic pressure with 0-279 KPa and 1 Hz one hour per day for 7 days was applied to tissue engineered bone constructs to investigate whether the loading stimulation can promote osteogenesis and angiogenesis mutually evaluated in parallel by multiple in vitro assays and in an in vivo chicken chorioallantoic membrane (CAM) model. The results indicated that the immobilization of VEGF can improve biocompatibility of PLGA scaffolds and promote cell attachment and proliferation. The cell-scaffold constructs showed higher CD31 expression because of the angiogenic differentiation of rMSCs in hydrostatic loading culture condition in vitro. The in vivo CAM model experiment demonstrated that hydrostatic loading stimulated angiogenic differentiation of rMSCs can accelerate tubulogenesis. Furthermore, the new capillaries formed in cell-scaffold constructs were conducive to calcium deposition in vivo.

An encapsulated fibrin-based bioartificial tissue construct with integrated macrovessels, microchannels and capillary tubes

Facilitating sufficient nutrient and oxygen supply in large-scale bioartificial constructs is a critical step in organ bioengineering. Immediate perfusion not only depends on a dense capillary network, but also requires integrated large-diameter vessels that allow vascular anastomoses during implantation. These requirements set high demands for matrix generation as well as for in vitro cultivation techniques and remain mostly unsolved challenges up until today. Additionally, bioartificial constructs must have sufficient biomechanical stability to withstand mechanical stresses during and after implantation. We developed a bioartificial tissue construct with a fibrin matrix containing human umbilical vein endothelial cells and adipose tissue-derived stem cells facilitating capillary-like network formation. This core matrix was surrounded by a dense acellular fibrin capsule providing biomechanical stability. Two fibrin-based macrovessels were integrated on each side of the construct and interconnected via four 1.2 mm thick microchannels penetrating the cellularized core matrix. After four days of perfusion in a custom-built bioreactor, homogenous capillary-like network formation throughout the core matrix was observed. The fibrin capsule stabilized the core matrix and facilitated the generation of a self-supporting construct. Thus, the encapsulated fibrin tissue construct could provide a universal pre-vascularized matrix for seeding with different cell types in various tissue engineering approaches. This article is protected by copyright. All rights reserved.

Cardiovascular tissue engineering and regeneration: A plead for further knowledge convergence

Cardiovascular tissue engineering and regeneration strive to provide long-term, effective solutions for a growing group of patients in need of myocardial repair, vascular (access) grafts, heart valves, and regeneration of organ microcirculation. In the past two decades, ongoing convergence of disciplines and multidisciplinary collaborations between cardiothoracic surgeons, cardiologists, bioengineers, material scientists, and cell biologists have resulted in better understanding of the problems at hand and novel regenerative approaches. As a side effect, however, the field has become strongly organized and differentiated around topical areas at risk of reinvention of technologies and repetition of approaches and across the areas. A better integration of knowledge and technologies from the individual topical areas and regenerative approaches and technologies may pave the way towards faster and more effective treatments to cure the cardiovascular system. This review summarizes the evolution of research and regenerative approaches in the areas of myocardial regeneration, heart valve and vascular tissue engineering, and regeneration of microcirculations and discusses previous and potential future integration of these individual areas and developed technologies for improved clinical impact. Finally, it provides a perspective on the further integration of research organization, knowledge implementation, and valorization as a contributor to advancing cardiovascular tissue engineering and regenerative medicine.

Healthy versus Unhealthy Adipose Tissue Expansion: the Role of Exercise

Although the hallmark of obesity is the expansion of adipose tissue, not all adipose tissue expansion is the same. Expansion of healthy adipose tissue is accompanied by adequate capillary angiogenesis and mitochondria-centered metabolic integrity, whereas expansion of unhealthy adipose tissue is associated with capillary and mitochondrial derangement, resulting in deposition of immune cells (M1-stage macrophages) and excess production of pro-inflammatory cytokines. Accumulation of these dysfunctional adipose tissues has been linked to the development of obesity comorbidities, such as type 2 diabetes, hypertension, dyslipidemia, and cardiovascular disease, which are leading causes of human mortality and morbidity in modern society. Mechanistically, vascular rarefaction and mitochondrial incompetency (for example, low mitochondrial content, fragmented mitochondria, defective mitochondrial respiratory function, and excess production of mitochondrial reactive oxygen species) are frequently observed in adipose tissue of obese patients. Recent studies have demonstrated that exercise is a potent behavioral intervention for preventing and reducing obesity and other metabolic diseases. However, our understanding of potential cellular mechanisms of exercise, which promote healthy adipose tissue expansion, is at the beginning stage. In this review, we hypothesize that exercise can induce unique physiological stimuli that can alter angiogenesis and mitochondrial remodeling in adipose tissues and ultimately promote the development and progression of healthy adipogenesis. We summarize recent reports on how regular exercise can impose differential processes that lead to the formation of either healthy or unhealthy adipose tissue and discuss key knowledge gaps that warrant future research.

Advances in microfabrication technologies in tissue engineering and regenerative medicine

BACKGROUND

Tissue engineering provides various strategies to fabricate an appropriate microenvironment to support the repair and regeneration of lost or damaged tissues. In this matter, several technologies have been implemented to construct close-to-native three-dimensional structures at numerous physiological scales, which are essential to confer the functional characteristics of living tissues.

METHODS

In this article, we review a variety of microfabrication technologies that are currently utilized for several tissue engineering applications, such as soft lithography, microneedles, templated and self-assembly of microstructures, microfluidics, fiber spinning, and bioprinting.

RESULTS

These technologies have considerably helped us to precisely manipulate cells or cellular constructs for the fabrication of biomimetic tissues and organs. Although currently available tissues still lack some crucial functionalities, including vascular networks, innervation, and lymphatic system, microfabrication strategies are being proposed to overcome these issues. Moreover, the microfabrication techniques that have progressed to the preclinical stage are also discussed.

CONCLUSIONS

This article aims to highlight the advantages and drawbacks of each technique and areas of further research for a more comprehensive and evolving understanding of microfabrication techniques in terms of tissue engineering and regenerative medicine applications.

Methods for vascularization and perfusion of tissue organoids

Tissue organoids or "mini organs" can be invaluable tools for understanding health and disease biology, modeling tissue dynamics, or screening potential drug candidates. Effective vascularization of these models is critical for truly representing the in vivo tissue environment. Not only is the formation of a vascular network, and ultimately a microcirculation, essential for proper distribution and exchange of oxygen and nutrients throughout larger organoids, but vascular cells dynamically communicate with other cells to modulate overall tissue behavior. Additionally, interstitial fluid flow, mediated by a perfused microvasculature, can have profound influences on tissue biology. Thus, a truly functionally and biologically relevant organoid requires a vasculature. Here, we review existing strategies for fabricating and incorporating vascular elements and perfusion within tissue organoids.

Estimation of shear stress values along endothelial tip cells past the lumen of capillary sprouts

Shear stress is recognized as a regulator of angiogenesis. However, the shear stress experienced by the endothelial cells of capillary sprouts remains unknown. The objective of this study was to estimate shear stress due to local interstitial flow along endothelial tip cells at the end of the capillary sprout lumen. Computational fluid dynamics were used to model flow within a blind-ended vessel, transendothelial flow across the vessel wall, and flow within the surrounding perivascular/interstitial space. Shear stress along the wall of the tip cells was calculated while varying sprout length, perivascular space channel width, and vessel wall hydraulic conductivity. Increasing sprout length, increasing wall hydraulic conductivity, and decreasing perivascular space width increased shear stress magnitude. Wall shear stress magnitude within the lumen ranged from 0.015 to 0.55 dyne/cm² at the sprout entrance and linearly decreased to near zero at the base of the tip cells. Tip cell wall shear stress magnitude due to interstitial flow ranged from 0.009 to 4.65 dyne/cm². In 3 out of 8 cases, shear stress magnitude was above 1 dyne/cm² and considered physiologically relevant. The results provide a framework for discussing the role of local mechanical cues in regulating endothelial cell dynamics involved in angiogenesis. Mainly, interstitial flows may generate physiologically relevant shear stresses on tip cells in certain scenarios. This source of tip cell shear stress has not been previously considered or modeled.

Inverting angiogenesis with interstitial flow and chemokine matrix-binding affinity

The molecular signaling pathways that orchestrate angiogenesis have been widely studied, but the role of biophysical cues has received less attention. Interstitial flow is unavoidable in vivo, and has been shown to dramatically change the neovascular patterns, but the mechanisms by which flow regulates angiogenesis remain poorly understood. Here, we study the complex interactions between interstitial flow and the affinity for matrix binding of different chemokine isoforms. Using a computational model, we find that changing the matrix affinity of the chemokine isoform can invert the effect of interstitial flow on angiogenesis—from preferential growth in the direction of the flow when the chemokine is initially matrix-bound to preferential flow against the flow when it is unbound. Although fluid forces signal endothelial cells directly, our data suggests a mechanism for the inversion based on biotransport arguments only, and offers a potential explanation for experimental results in which interstitial flow produced preferential vessel growth with and against the flow. Our results point to a particularly intricate effect of interstitial flow on angiogenesis in the tumor microenvironment, where the vessel network geometry and the interstitial flow patterns are complex.

A Single Application of Cold Atmospheric Plasma (CAP) Improves Blood Flow Parameters in Chronic Wounds

OBJECTIVE

To find out if application of cold atmospheric plasma (CAP) affects microcirculation in chronic wounds.

METHODS

We treated 20 patients with chronic wounds on the lower extremity with CAP. Blood flow parameters of wounds were assessed with combined Laser-Doppler-Flowmetry and spectrophotometry in tissue depth of 2 and 6-8 millimeters. Parameters were assessed under standardized conditions before and over the course of 30 minutes after application of CAP.

RESULTS

Deep capillary blood flow increased significantly by up to 24.33% (percentage change) after treatment with CAP and remained significantly elevated until the end of measuring period at 30 minutes. Superficial oxygen tissue saturation was significantly elevated by 14.05% for the first 5 minutes after treatment. Postcapillary venous filling pressure was significantly elevated by 10.23% 19 minutes after CAP and stayed significantly elevated starting from minute 24 until the end of measuring.

CONCLUSION

CAP increases microcirculation parameters in chronic wounds significantly. Since CAP is known for its benefits in wound healing the effects observed may explain the improved healing of chronic wounds after its use. Whether CAP application can increase blood flow in chronic wounds for longer periods of time or boosts blood flow when applied more than once should be subject to further research.

Bioprinted microvasculature: progressing from structure to function

Three-dimensional (3D) bioprinting seeks to unlock the rapid generation of complex tissue constructs, but long-standing challenges with efficientin vitromicrovascularization must be solved before this can become a reality. Microvasculature is particularly challenging to biofabricate due to the presence of a hollow lumen, a hierarchically branched network topology, and a complex signaling milieu. All of these characteristics are required for proper microvascular-and, thus, tissue-function. While several techniques have been developed to address distinct portions of this microvascularization challenge, no single approach is capable of simultaneously recreating all three microvascular characteristics. In this review, we present a three-part framework that proposes integration of existing techniques to generate mature microvascular constructs. First, extrusion-based 3D bioprinting creates a mesoscale foundation of hollow, endothelialized channels. Second, biochemical and biophysical cues induce endothelial sprouting to create a capillary-mimetic network. Third, the construct is conditioned to enhance network maturity. Across all three of these stages, we highlight the potential for extrusion-based bioprinting to become a central technique for engineering hierarchical microvasculature. We envision that the successful biofabrication of functionally engineered microvasculature will address a critical need in tissue engineering, and propel further advances in regenerative medicine andex vivohuman tissue modeling.

Multilayer microfluidic platform for the study of luminal, transmural, and interstitial flow

Efficient delivery of oxygen and nutrients to tissues requires an intricate balance of blood, lymphatic, and interstitial fluid pressures (IFPs), and gradients in fluid pressure drive the flow of blood, lymph, and interstitial fluid through tissues. While specific fluid mechanical stimuli, such as wall shear stress, have been shown to modulate cellular signaling pathways along with gene and protein expression patterns, an understanding of the key signals imparted by flowing fluid and how these signals are integrated across multiple cells and cell types in native tissues is incomplete due to limitations with current assays. Here, we introduce a multi-layer microfluidic platform (MμLTI-Flow) that enables the culture of engineered blood and lymphatic microvessels and independent control of blood, lymphatic, and IFPs. Using optical microscopy methods to measure fluid velocity for applied input pressures, we demonstrate varying rates of interstitial fluid flow as a function of blood, lymphatic, and interstitial pressure, consistent with computational fluid dynamics (CFD) models. The resulting microfluidic and computational platforms will provide for analysis of key fluid mechanical parameters and cellular mechanisms that contribute to diseases in which fluid imbalances play a role in progression, including lymphedema and solid cancer.

An Overview of Organs-on-Chips Based on Deep Learning

Microfluidic-based organs-on-chips (OoCs) are a rapidly developing technology in biomedical and chemical research and have emerged as one of the most advanced and promising in vitro models. The miniaturization, stimulated tissue mechanical forces, and microenvironment of OoCs offer unique properties for biomedical applications. However, the large amount of data generated by the high parallelization of OoC systems has grown far beyond the scope of manual analysis by researchers with biomedical backgrounds. Deep learning, an emerging area of research in the field of machine learning, can automatically mine the inherent characteristics and laws of "big data" and has achieved remarkable applications in computer vision, speech recognition, and natural language processing. The integration of deep learning in OoCs is an emerging field that holds enormous potential for drug development, disease modeling, and personalized medicine. This review briefly describes the basic concepts and mechanisms of microfluidics and deep learning and summarizes their successful integration. We then analyze the combination of OoCs and deep learning for image digitization, data analysis, and automation. Finally, the problems faced in current applications are discussed, and future perspectives and suggestions are provided to further strengthen this integration.

The biophysics of cancer: emerging insights from micro- and nanoscale tools

Cancer is a complex and dynamic disease that is aberrant both biologically and physically. There is growing appreciation that physical abnormalities with both cancer cells and their microenvironment that span multiple length scales are important drivers for cancer growth and metastasis. The scope of this review is to highlight the key advancements in micro- and nano-scale tools for delineating the cause and consequences of the aberrant physical properties of tumors. We focus our review on three important physical aspects of cancer: 1) solid mechanical properties, 2) fluid mechanical properties, and 3) mechanical alterations to cancer cells. Beyond posing physical barriers to the delivery of cancer therapeutics, these properties are also known to influence numerous biological processes, including cancer cell invasion and migration leading to metastasis, and response and resistance to therapy. We comment on how micro- and nanoscale tools have transformed our fundamental understanding of the physical dynamics of cancer progression and their potential for bridging towards future applications at the interface of oncology and physical sciences.

Integrating engineered macro vessels with self-assembled capillaries in 3D implantable tissue for promoting vascular integration in-vivo

A functional multi-scale vascular network can promote 3D engineered tissue growth and improve transplantation outcome. In this work, by using a combination of living cells, biological hydrogel, and biodegradable synthetic polymer we fabricated a biocompatible, multi-scale vascular network (MSVT) within thick, implantable engineered tissues. Using a templating technique, macro-vessels were patterned in a 3D biodegradable polymeric scaffold seeded with endothelial and support cells within a collagen gel. The lumen of the macro-vessel was lined with endothelial cells, which further sprouted and anastomosed with the surrounding self-assembled capillaries. Anastomoses between the two-scaled vascular systems displayed tightly bonded cell junctions, as indicated by vascular endothelial cadherin expression. Moreover, MSVT functionality and patency were demonstrated by dextran passage through the interconnected multi-scale vasculature. Additionally, physiological flow conditions were applied with home-designed flow bioreactors, to achieve a MSVT with a natural endothelium structure. Finally, implantation of a multi-scale-vascularized graft in a mouse model resulted in extensive host vessel penetration into the graft and a significant increase in blood perfusion via the engineered vessels compared to control micro-scale-vascularized graft. Designing and fabricating such multi-scale vascular architectures within 3D engineered tissues may benefit both in vitro models and therapeutic translation research.

Recent advances on bioengineering approaches for fabrication of functional engineered cardiac pumps: A review

The field of cardiac tissue engineering has advanced over the past decades; however, most research progress has been limited to engineered cardiac tissues (ECTs) at the microscale with minimal geometrical complexities such as 3D strips and patches. Although microscale ECTs are advantageous for drug screening applications because of their high-throughput and standardization characteristics, they have limited translational applications in heart repair and the in vitro modeling of cardiac function and diseases. Recently, researchers have made various attempts to construct engineered cardiac pumps (ECPs) such as chambered ventricles, recapitulating the geometrical complexity of the native heart. The transition from microscale ECTs to ECPs at a translatable scale would greatly accelerate their translational applications; however, researchers are confronted with several major hurdles, including geometrical reconstruction, vascularization, and functional maturation. Therefore, the objective of this paper is to review the recent advances on bioengineering approaches for fabrication of functional engineered cardiac pumps. We first review the bioengineering approaches to fabricate ECPs, and then emphasize the unmatched potential of 3D bioprinting techniques. We highlight key advances in bioprinting strategies with high cell density as researchers have begun to realize the critical role that the cell density of non-proliferative cardiomyocytes plays in the cell-cell interaction and functional contracting performance. We summarize the current approaches to engineering vasculatures both at micro- and meso-scales, crucial for the survival of thick cardiac tissues and ECPs. We showcase a variety of strategies developed to enable the functional maturation of cardiac tissues, mimicking the in vivo environment during cardiac development. By highlighting state-of-the-art research, this review offers personal perspectives on future opportunities and trends that may bring us closer to the promise of functional ECPs.