Minimizing buried interfacial defects for efficient inverted perovskite solar cells

Co-Self-Assembled Monolayers Modified NiOx for Stable Inverted Perovskite Solar Cells

[4-(3,6-dimethyl-9H-carbazol-9yl)butyl]phosphonic acid (Me-4PACz) self-assembled molecules (SAM) are an effective method to solve the problem of the buried interface of NiOx in inverted perovskite solar cells (PSCs). However, the Me-4PACz end group (carbazole core) cannot forcefully passivate defects at the bottom of the perovskite film. Here, a Co-SAM strategy is employed to modify the buried interface of PSCs. Me-4PACz is doped with phosphorylcholine chloride (PC) to form a Co-SAM to improve the monolayer coverage and reduce leakage current. The phosphate group and chloride ions (Cl-) in PC can inhibit NiOx surface defects. Meantime, the quaternary ammonium ions and Cl- in PC can fill organic cations and halogen vacancies in the perovskite film to enable defects passivation. Moreover, Co-SAM can promote the growth of perovskite crystals, collaboratively solve the problem of buried defects, suppress nonradiative recombination, accelerate carrier transmission, and relieve the residual stress of the perovskite film. Consequently, the Co-SAM modified devices show power conversion efficiencies as high as 25.09% as well as excellent device stability with 93% initial efficiency after 1000 h of operation under one-sun illumination. This work demonstrates the novel approach for enhancing the performance and stability of PSCs by modifying Co-SAM on NiOx.

Tailoring the Buried Interface by Dipolar Halogen-Substituted Arylamine for Efficient and Stable Perovskite Solar Cells

Improving the quality of the buried interface is decisive for achieving stable and high-efficiency perovskite solar cells. Herein, we report the interface engineering by using dipolar 2,4-difluoro-3,5-dichloroaniline (DDE) as the adhesive between titanium dioxide (TiO2) and MAPbI3. By manipulation of the anchoring groups of DDE, this molecule not only passivated defects of TiO2 but also optimized the energy level alignment. Furthermore, the perovskite film on the modified TiO2 surface showed improved crystallinity, released residual stress, and reduced trap states. Therefore, these benefits directly contribute to achieving a power conversion efficiency of up to 22.10%. The unencapsulated device retained 90% of initial power conversion efficiencies (PCE) after continuous light illumination for 1000 h and 93% of initial PCE after exposure to air with a relative humidity of 30-40% for over 3000 h. Moreover, the performance of PSCs based on FA0.15MA0.85PbI3 has also increased from 20.48 to 23.51%. Our results demonstrate the effectiveness and universality of dipolar halogen-substituted arylamine (DDE) for enhancing PSC performance.

Unraveling the Molecular Size Effect on Surface Engineering of Perovskite Solar Cells

Surface engineering in perovskite solar cells, especially for the upper surface of perovskite, is widely studied. However, most of these studies have primarily focused on the interaction between additive functional groups and perovskite point defects, neglecting the influence of other parts of additive molecules. Herein, additives with -NH3 + functional group are introduced at the perovskite surface to suppress surface defects. The chain lengths of these additives vary to conduct a detailed investigation into the impact of molecular size. The results indicate that the propane-1,3-diamine dihydroiodide (PDAI2 ), which possesses the most suitable size, exhibited obvious optimization effects. Whereas the molecules, methylenediamine dihydroiodide (MDAI2 ) and pentane-1,5-diamine dihydroiodide (PentDAI2 ) with unsuitable size, lead to a deterioration in device performance. The PDAI2 -treated devices achieved a certified power conversion efficiency (PCE) of 25.81% and the unencapsulated devices retained over 80% of their initial PCE after 600 h AM1.5 illumination.

Interfacial Layer Materials with a Truxene Core for Dopant-Free NiOx -Based Inverted Perovskite Solar Cells

Nickel oxide (NiOx ) is commonly used as a holetransporting material (HTM) in p-i-n perovskite solar cells. However, the weak chemical interaction between the NiOx and CH3 NH3 PbI3 (MAPbI3 ) interface results in poor crystallinity, ineffective hole extraction, and enhanced carrier recombination, which are the leading causes for the limited stability and power conversion efficiency (PCE). Herein, two HTMs, TRUX-D1 (N2 ,N7 ,N12 -tris(9,9-dimethyl-9H-fluoren-2-yl)-5,5,10,10,15,15-hexaheptyl-N2 ,N7 ,N12 -tris(4-methoxyphenyl)-10,15-dihydro-5H-diindeno[1,2-a:1',2'-c]fluorene-2,7,12-triamine) and TRUX-D2 (5,5,10,10,15,15-hexaheptyl-N2 ,N7 ,N12 -tris(4-methoxyphenyl)-N2 ,N7 ,N12 -tris(10-methyl-10H-phenothiazin-3-yl)-10,15-dihydro-5H-diindeno[1,2-a:1',2'-c]fluorene-2,7,12-triamine), are designed with a rigid planar C3 symmetry truxene core integrated with electron-donating amino groups at peripheral positions. The TRUX-D molecules are employed as effective interfacial layer (IFL) materials between the NiOx and MAPbI3 interface. The incorporation of truxene-based IFLs improves the quality of perovskite crystallinity, minimizes nonradiative recombination, and accelerates charge extraction which has been confirmed by various characterization techniques. As a result, the TRUX-D1 exhibits a maximum PCE of up to 20.8% with an impressive long-term stability. The unencapsulated device retains 98% of their initial performance following 210 days of aging in a glove box and 75.5% for the device after 80 days under ambient air condition with humidity over 40% at 25 °C.

Stability of organic solar cells: toward commercial applications

Organic solar cells (OSCs) have attracted a great deal of attention in the field of clean solar energy due to their advantages of transparency, flexibility, low cost and light weight. Introducing them to the market enables seamless integration into buildings and windows, while also supporting wearable, portable electronics and internet-of-things (IoT) devices. With the development of photovoltaic materials and the optimization of fabrication technology, the power conversion efficiencies (PCEs) of OSCs have rapidly improved and now exceed 20%. However, there is a significant lack of focus on material stability and device lifetime, causing a severe hindrance to commercial applications. In this review, we carefully review important strategies employed to improve the stability of OSCs over the past three years from the perspectives of material design and device engineering. Furthermore, we analyze and discuss the current important progress in terms of air, light, thermal and mechanical stability. Finally, we propose the future research directions to overcome the challenges in achieving highly stable OSCs. We expect that this review will contribute to solving the stability problem of OSCs, eventually paving the way for commercial applications in the near future.

Efficient all-small-molecule organic solar cells processed with non-halogen solvent

All-small-molecule organic solar cells with good batch-to-batch reproducibility combined with non-halogen solvent processing show great potential for commercialization. However, non-halogen solvent processing of all-small-molecule organic solar cells are rarely reported and its power conversion efficiencies are very difficult to improve. Herein, we designed and synthesized a small molecule donor BM-ClEH that can take advantage of strong aggregation property induced by intramolecular chlorine-sulfur non-covalent interaction to improve molecular pre-aggregation in tetrahydrofuran and corresponding micromorphology after film formation. Tetrahydrofuran-fabricated all-small-molecule organic solar cells based on BM-ClEH:BO-4Cl achieved high power conversion efficiencies of 15.0% in binary device and 16.1% in ternary device under thermal annealing treatment. In contrast, weakly aggregated BM-HEH without chlorine-sulfur non-covalent bond is almost inefficient under same processing conditions due to poor pre-aggregation induced disordered π-π stacking, indistinct phase separation and exciton dissociation. This work promotes the development of non-halogen solvent processing of all-small-molecule organic solar cells and provides further guidance.

Beyond Planar Structure: Curved π-Conjugated Molecules for High-Performing and Stable Perovskite Solar Cells

Perovskite solar cell (PSC) shows a great potential to become the next-generation photovoltaic technology, which has stimulated researchers to engineer materials and to innovate device architectures for promoting device performance and stability. As the power conversion efficiency (PCE) keeps advancing, the importance of exploring multifunctional materials for the PSCs has been increasingly recognized. Considerable attention has been directed to the design and synthesis of novel organic π-conjugated molecules, particularly the emerging curved ones, which can perform various unmatched functions for PSCs. In this review, the characteristics of three representative such curved π-conjugated molecules (fullerene, corannulene and helicene) and the recent progress concerning the application of these molecules in state-of-the-art PSCs are summarized and discussed holistically. With this discussion, we hope to provide a fresh perspective on the structure-property relation of these unique materials toward high-performance and high-stability PSCs.

Strain Engineering and Halogen Compensation of Buried Interface in Polycrystalline Halide Perovskites

Inverted perovskite solar cells based on weakly polarized hole-transporting layers suffer from the problem of polarity mismatch with the perovskite precursor solution, resulting in a nonideal wetting surface. In addition to the bottom-up growth of the polycrystalline halide perovskite, this will inevitably worse the effects of residual strain and heterogeneity at the buried interface on the interfacial carrier transport and localized compositional deficiency. Here, we propose a multifunctional hybrid pre-embedding strategy to improve substrate wettability and address unfavorable strain and heterogeneities. By exposing the buried interface, it was found that the residual strain of the perovskite films was markedly reduced because of the presence of organic polyelectrolyte and imidazolium salt, which not only realized the halogen compensation and the coordination of Pb2+ but also the buried interface morphology and defect recombination that were well regulated. Benefitting from the above advantages, the power conversion efficiency of the targeted inverted devices with a bandgap of 1.62 eV was 21.93% and outstanding intrinsic stability. In addition, this coembedding strategy can be extended to devices with a bandgap of 1.55 eV, and the champion device achieved a power conversion efficiency of 23.74%. In addition, the optimized perovskite solar cells retained 91% of their initial efficiency (960 h) when exposed to an ambient relative humidity of 20%, with a T80 of 680 h under heating aging at 65 °C, exhibiting elevated durability.

Rational molecular design of multifunctional self-assembled monolayers for efficient hole selection and buried interface passivation in inverted perovskite solar cells

Self-assembled monolayers (SAMs) have been widely employed as the bottom-contact hole-selective layer (HSL) in inverted perovskite solar cells (PSCs). Besides manipulating the electrical properties, molecularly engineering the SAM provides an opportunity to modulate the perovskite buried interface. Here, we successfully introduced Lewis-basic oxygen and sulfur heteroatoms through rational molecular design of asymmetric SAMs to obtain two novel multifunctional SAMs, CbzBF and CbzBT. Detailed characterization of single-crystal structures and device interfaces shows that enhanced packing, more effective ITO work function adjustment, and buried interface passivation were successfully achieved. Consequently, the champion PSC employing CbzBT showed an excellent power conversion efficiency (PCE) of 24.0% with a high fill factor of 84.41% and improved stability. This work demonstrates the feasibility of introducing defect-passivating heterocyclic groups into SAM molecules to help passivate the interfacial defects in PSCs. The insights gained from this molecular design strategy will accelerate the development of new multifunctional SAM HSLs for efficient PSCs.

Enhancing Stability and Efficiency of Inverted Inorganic Perovskite Solar Cells with In-Situ Interfacial Cross-Linked Modifier

Inverted inorganic perovskite solar cells (PSCs) is potential as the top cells in tandem configurations, owing to the ideal bandgap, good thermal and light stability of inorganic perovskites. However, challenges such as mismatch of energy levels between charge transport layer and perovskite, significant non-radiative recombination caused by surface defects, and poor water stability have led to the urgent need for further improvement in the performance of inverted inorganic PSCs. Herein, the fabrication of efficient and stable CsPbI3-x Brx PSCs through surface treatment of (3-mercaptopropyl) trimethoxysilane (MPTS), is reported. The silane groups in MPTS can in situ crosslink in the presence of moisture to build a 3-dimensional (3D) network by Si-O-Si bonds, which forms a hydrophobic layer on perovskite surface to inhibit water invasion. Additionally, -SH can strongly interact with the undercoordinated Pb2+ at the perovskite surface, effectively minimizing interfacial charge recombination. Consequently, the efficiency of the inverted inorganic PSCs improves dramatically from 19.0% to 21.0% under 100 mW cm-2 illumination with MPTS treatment. Remarkably, perovskite films with crosslinked MPTS exhibit superior stability when soaking in water. The optimized PSC maintains 91% of its initial efficiency after aging 1000 h in ambient atmosphere, and 86% in 800 h of operational stability testing.

Microstress for metal halide perovskite solar cells: from source to influence and management

The power conversion efficiency of metal halide perovskite solar cells (PSCs) has increased dramatically in recent years, but there are still major bottlenecks in the commercial application of such materials, including intrinsic instability caused by external stimuli such as water, oxygen, and radiation, as well as local stress generated inside the perovskite and external stress caused by poor interlayer contact. However, some crucial sources of instability cannot be overcome by conventional encapsulation engineering. Among them, the tensile strain can weaken the chemical bonds in the perovskite lattice, thereby reducing the defects formation energy and activation energy of ion migration and accelerating the degradation rate of the perovskite crystal. This review expounds the latest in-depth understanding of microstrain in perovskite film from the thermodynamic sources and influences on the perovskite physicochemical structure and photoelectric performance. Furthermore, it also summarizes the effective strategies for strain regulation and interlayer contact performance improvement, which are conducive to the improvement of photovoltaic performance and internal stability of PSCs. Finally, we present a prospective outlook on how to achieve more stable and higher efficiency PSCs through strain engineering.

Strengthened Interficial Adhesive Fracture Energy by Young's Modulus Matching Degree Strategy in Carbon-Based HTM Free MAPbI3 Perovskite Solar Cell with Enhanced Mechanical Compatibility

Carbon-based hole transport layer-free perovskite solar cells (PSCs) based on methylammonium lead triiodide (MAPbI3 ) have become one of the research focus due to low cost, easy preparation, and good optoelectronic properties. However, instability of perovskite under vacancy defects and stress-strain makes it difficult to achieve high-efficiency and stable power output. Here, a soft-structured long-chain 2D pentanamine iodide (abbreviated as "PI") is used to improve perovskite quality and interfacial mechanical compatibility. PI containing CH3 (CH2 )4 NH3 + and I- ions not only passivate defects at grain boundaries, but also effectively alleviate residual stress during high temperature annealing via decreasing Young's modulus of perovskite film. Most importantly, PI effectively increases matching degree of Young's modulus between MAPbI3 (47.1 GPa) and carbon (6.7 GPa), and strengthens adhesive fracture energy (Gc ) between perovskite and carbon, which is helpful for outward release of nascent interfacial stress generated under service conditions. Consequently, photoelectric conversion efficiency (PCE) of optimal device is enhanced from 10.85% to 13.76% and operational stability is also significantly improved. 83.1% output is maintained after aging for 720 h at room temperature and 25-60% relative humidity (RH). This strategy of regulation from chemistry and physics provides a strategy for efficient and stable carbon-based PSCs.

HOF-101-based dual-mode biosensor for photoelectrochemical/electrochemiluminescence detection and imaging of oxytetracycline

A unique hydrogen-bonded organic frameworks (HOF-101)-based photoelectrochemical (PEC) and electrochemiluminescence (ECL) dual-mode biosensor using polydopamine nanoparticles (PDAs) as quencher was constructed for ultrasensitive detection and imaging of oxytetracycline (OXY). In particular, HOF-101 was a superior ECL material and can be observed with the naked eye. Furthermore, it also had outstanding PEC signal, so HOF-101 was a new dual-signal material with excellent performance, thus it was explored to realize dual-mode detection. As the main component of natural melanin, PDAs not only had good biocompatibility, but also contained rich functional groups on the surface. Additionally, PDAs had excellent light absorption ability and poor conductivity, which made it the excellent photoquencher. In this work, PDAs were introduced on the surface of HOF-101 to quench its ECL and PEC signals by using the dual-aptamer sandwich method, achieving ultrasensitive detection of antibiotic OXY. Particularly for ECL detection, HOF-101 was firstly used to visually detect OXY. The detection range can reach 0.1 pM-100 nM, and the limit of detection (LOD) can reach 0.04 pM. This work showed a great contribution to the development of new ECL-PEC materials and ECL visualization analysis, which had outstanding application potential in the fields of food safety and biochemical analysis.

In Situ Dual-Interface Passivation Strategy Enables The Efficiency of Formamidinium Perovskite Solar Cells Over 25

Perovskite solar cells (PSCs) are promising candidates for next-generation photovoltaics owing to their unparalleled power conversion efficiencies (PCEs). Currently, approaches to further improve device efficiencies tend to focus on the passivation of interfacial defects. Although various strategies have been developed to mitigate these defects, many involve complex and time-consuming post-treatment processes, thereby hindering their widespread adoption in commercial applications. In this work, a concise but efficient in situ dual-interface passivation strategy is developed wherein 1-butyl-3-methylimidazolium methanesulfonate (MS) is employed as a precursor additive. During perovskite crystallization, MS can either be enriched downward through precipitation with SnO2 , or can be aggregated upward through lattice extrusion. These self-assembled MS species play a significant role in passivating the defect interfaces, thereby reducing nonradiative recombination losses, and promoting more efficient charge extraction. As a result, a PCE >25% (certified PCE of 24.84%) is achieved with substantially improved long-term storage and photothermal stabilities. This strategy provides valuable insights into interfacial passivation and holds promise for the industrialization of PSCs.

Novel Strategy for High Efficient and Stable Perovskite Solar Cells through Atomic Layer Deposition

The perovskite material has demonstrated conceivable potential as an absorbing material of solar cells. Although the power conversion efficiency of the device based on perovskite has rapidly come to 26%, there are still many factors that affect the further improvement of the photoelectric conversion efficiency. Interface defects are the dominating concern that influence carrier transportation and stability. Here, we report a novel strategy where B2O3 is deposited on the fresh perovskite film by atomic layer deposition technology. The organic atmosphere during atomic layer deposition can effectively regulate the crystallization kinetics of perovskites and promote crystal growth. The B2O3 adsorbed on the perovskite light-absorption layer can effectively reduce the electropositive defects on the surface of the perovskite, such as uncoordinated Pb2+ and I vacancies due to the electron-donating properties of the side O atoms in B2O3. Consequently, the power conversion efficiency of the perovskite solar cell after B2O3 treatment increases to 21.78% from 18.89%. Simultaneously, B2O3 can improve the stability of devices.

Self-assembled hole-transporting material constructed by chlorination and conjugation strategies toward efficient organic solar cells

The moderate charge-transporting capability together with higher-lying energetic levels of self-assembling hole-transporting materials (SAMs) constrain the productive carrier extraction dynamics. To alleviate this issue, a synergetic chlorination and extended conjugation strategy is applied to explore a novel HTL, named 2Cl-TPA-CN-COOH. Indeed, the chlorinated head backbone would deepen the energetic level and strengthen the intramolecular push-pull effect, whereas the elongated conjugation unit would boost the carrier-transporting potential. Consequently, a champion power conversion efficiency (PCE) of 18.6% with upgraded stability is obtained in a 2Cl-TPA-CN-COOH cell. These results demonstrate a new insight of the molecular configuration of SAMs, which would contribute to the enhancements of performance and reliability in the OSC field.

Self-Assembled Monolayer-Based Hole-Transporting Materials for Perovskite Solar Cells

Ever since self-assembled monolayers (SAMs) were adopted as hole-transporting layers (HTL) for perovskite solar cells (PSCs), numerous SAMs for HTL have been synthesized and reported. SAMs offer several unique advantages including relatively simple synthesis, straightforward molecular engineering, effective surface modification using small amounts of molecules, and suitability for large-area device fabrication. In this review, we discuss recent developments of SAM-based hole-transporting materials (HTMs) for PSCs. Notably, in this article, SAM-based HTMs have been categorized by similarity of synthesis to provide general information for building a SAM structure. SAMs are composed of head, linker, and anchoring groups, and the selection of anchoring groups is key to design the synthetic procedure of SAM-based HTMs. In addition, the working mechanism of SAM-based HTMs has been visualized and explained to provide inspiration for finding new head and anchoring groups that have not yet been explored. Furthermore, both photovoltaic properties and device stabilities have been discussed and summarized, expanding reader's understanding of the relationship between the structure and performance of SAMs-based PSCs.

Insight into Air Degradation of Inverted Perovskite Solar Cells with Different Cathode Interlayers

Air stability is a big challenge for inverted perovskite solar cells (IPVSCs). We focus on effect of a cathode interlayer (BCP or TOASiW12) on air degradation of IPVSCs with an Al or Ag cathode. Combined measurements have been carried out to check the changes of the device electrical performance with exposure to air. Our results demonstrated that the IPVSCs with BCP/Al suffered an overall deterioration in terms of dissociation of excitons, transport, and extraction of charge carriers, which was accompanied by improved trap density and serious trap-induced recombination when exposed to air. Instead, all the electrical characteristics of the IPVSCs with TOASiW12/Al, BCP/Ag and TOASiW12/Ag remained stable or slightly reduced after exposed to air over 2 days. This work provides new insight into the air aging of IPVSCs and facilitates the development of CIL materials for cost-effective IPVSCs.

Fully Aromatic Self-Assembled Hole-Selective Layer toward Efficient Inverted Wide-Bandgap Perovskite Solar Cells with Ultraviolet Resistance

Ultraviolet-induced degradation has emerged as a critical stability concern impeding the widespread adoption of perovskite solar cells (PSCs), particularly in the context of phase-unstable wide-band gap perovskite films. This study introduces a novel approach by employing a fully aromatic carbazole-based self-assembled monolayer, denoted as (4-(3,6-dimethoxy-9H-carbazol-9-yl)phenyl)phosphonic acid (MeO-PhPACz), as a hole-selective layer (HSL) in inverted wide-band gap PSCs. Incorporating a conjugated linker plays a pivotal role in promoting the formation of a dense and highly ordered HSL on substrates, facilitating subsequent perovskite interfacial interactions, and fostering the growth of uniform perovskite films. The high-quality film could effectively suppress interfacial non-radiative recombination, improving hole extraction/transport efficiency. Through these advancements, the optimized wide-band gap PSCs, featuring a band gap of 1.68 eV, attain an impressive power conversion efficiency (PCE) of 21.10 %. Remarkably, MeO-PhPACz demonstrates inherent UV resistance and heightened UV absorption capabilities, substantially improving UV resistance for the targeted PSCs. This characteristic holds significance for the feasibility of large-scale outdoor applications.

Multifunctional ytterbium oxide buffer for perovskite solar cells

Perovskite solar cells (PSCs) comprise a solid perovskite absorber sandwiched between several layers of different charge-selective materials, ensuring unidirectional current flow and high voltage output of the devices1,2. A 'buffer material' between the electron-selective layer and the metal electrode in p-type/intrinsic/n-type (p-i-n) PSCs (also known as inverted PSCs) enables electrons to flow from the electron-selective layer to the electrode3-5. Furthermore, it acts as a barrier inhibiting the inter-diffusion of harmful species into or degradation products out of the perovskite absorber6-8. Thus far, evaporable organic molecules9,10 and atomic-layer-deposited metal oxides11,12 have been successful, but each has specific imperfections. Here we report a chemically stable and multifunctional buffer material, ytterbium oxide (YbOx), for p-i-n PSCs by scalable thermal evaporation deposition. We used this YbOx buffer in the p-i-n PSCs with a narrow-bandgap perovskite absorber, yielding a certified power conversion efficiency of more than 25%. We also demonstrate the broad applicability of YbOx in enabling highly efficient PSCs from various types of perovskite absorber layer, delivering state-of-the-art efficiencies of 20.1% for the wide-bandgap perovskite absorber and 22.1% for the mid-bandgap perovskite absorber, respectively. Moreover, when subjected to ISOS-L-3 accelerated ageing, encapsulated devices with YbOx exhibit markedly enhanced device stability.

Thiol-Functionalized Conjugated Metal-Organic Frameworks for Stable and Efficient Perovskite Photovoltaics

Metal-organic frameworks (MOFs) have been investigated recently in perovskite photovoltaics owing to their potential to boost optoelectronic performance and device stability. However, the impact of variations in the MOF side chain on perovskite characteristics and the mechanism of MOF/perovskite film formation remains unclear. In this study, three nanoscale thiol-functionalized UiO-66-type Zr-based MOFs (UiO-66-(SH)2 , UiO-66-MSA, and UiO-66-DMSA) are systematically employed and examined in perovskite solar cells (PSCs). Among these MOFs, UiO-66-(SH)2 , with its rigid organic ligands, exhibited a strong interaction with perovskite materials with more efficient suppression of perovskite vacancy defects. More importantly, A detailed and in-depth discussion is provided on the formation mechanism of UiO-66-(SH)2 -assisted perovskite film upon in situ GIWAXS performed during the annealing process. The incorporation of UiO-66-(SH)2 additives substantially facilitates the conversion of PbI2 into the perovskite phase, prolongs the duration of stage I, and induces a delayed phase transformation pathway. Consequently, the UiO-66-(SH)2 -assisted device demonstrates reduced defect density and superior optoelectronic properties with optimized power conversion efficiency of 24.09% and enhanced long-term stability under ambient environment and continuous light illumination conditions. This study acts as a helpful design guide for desired MOF/perovskite structures, enabling further advancements in MOF/perovskite optoelectronic devices.

Hole Transport Layer-Free Low-Bandgap Perovskite Solar Cells for Efficient All-Perovskite Tandems

Low-bandgap (LBG, Eg  ≈1.25 eV) tin-lead (Sn-Pb) perovskite solar cells (PSCs) play critical roles in constructing efficient all-perovskite tandem solar cells (TSCs) that can surpass the efficiency limit of single-junction solar cells. However, the traditional poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) hole transport layer (HTL) in LBG PSCs usually restricts device efficiency and stability. Here, a strategy of employing 2-aminoethanesulfonic acid (i.e., taurine) as the interface bridge to fabricate efficient HTL-free LBG PSCs with improved optoelectronic properties of the perovskite absorbers at the buried contacts is reported. Taurine-modified ITO substrate has lower optical losses, better energy level alignment, and higher charge transfer capability than PEDOT:PSS HTL, leading to significantly improved open-circuit voltage (VOC ) and short-circuit current density of corresponding devices. The best-performing LBG PSC with a power conversion efficiency (PCE) of 22.50% and an impressive VOC of 0.911 V is realized, enabling all-perovskite TSCs with an efficiency of 26.03%. The taurine-based HTL-free TSCs have highly increased stability, retaining more than 90% and 80% of their initial PCEs after constant operation under 1-sun illumination for 600 h and under 55 °C thermal stress for 950 h, respectively. This work provides a facile strategy for fabricating efficient and stable perovskite devices with a simplified HTL-free architecture.

Competitive Formation Mechanism for Bidentate Passivation of Halogen Vacancies in Perovskite Based on 6-Chloropurine

For metal halide perovskite solar cells, bidentate passivation (BP) is highly effective, but currently, only passivation sites rather than molecular environments are being considered. Here, the authors report an effective approach for high-performance fully printable mesoscopic perovskite solar cells (FP-PSCs) through the BP strategy using the multidentate molecule 6-chloropurine (6-CP). By utilizing density functional theory (DFT) calculations, X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR) characterizations, the competition mechanism is identified of BP between the chlorine atom and neighboring nitrogen atom of the imidazole and pyrimidine rings. Through BP between the chlorine atom and adjacent nitrogen atom in imidazole, the power conversion efficiency (PCE) of the pristine samples is significantly enhanced from 16.25% to 17.63% with 6-CP. The formation of BP enhances interfacial hole selectivity and charge transfer, and suppresses nonradiative recombination, improving device stability under high humidity conditions. The competition mechanism of BP between two aromatic cycles provides a path for designing molecular passivants and selecting passivation pathways to approach theoretical limits.

Passivating Dipole Layer Bridged 3D/2D Perovskite Heterojunction for Highly Efficient and Stable p-i-n Solar Cells

Constructing 3D/2D perovskite heterojunction is a promising approach to integrate the benefits of high efficiency and superior stability in perovskite solar cells (PSCs). However, in contrast to n-i-p architectural PSCs, the p-i-n PSCs with 3D/2D heterojunction have serious limitations in achieving high-performance as they suffer from a large energetic mismatch and electron extraction energy barrier from a 3D perovskite layer to a 2D perovskite layer, and serious nonradiative recombination at the heterojunction. Here a strategy of incorporating a thin passivating dipole layer (PDL) onto 3D perovskite and then depositing 2D perovskite without dissolving the underlying layer to form an efficient 3D/PDL/2D heterojunction is developed. It is revealed that PDL regulates the energy level alignment with the appearance of interfacial dipole and strongly interacts with 3D perovskite through covalent bonds, which eliminate the energetic mismatch, reduce the surface defects, suppress the nonradiative recombination, and thus accelerate the charge extraction at such electron-selective contact. As a result, it is reported that the 3D/PDL/2D junction p-i-n PSCs present a power conversion efficiency of 24.85% with robust stability, which is comparable to the state-of-the-art efficiency of the 3D/2D junction n-i-p devices.

Homogenized NiOx nanoparticles for improved hole transport in inverted perovskite solar cells

The power conversion efficiency (PCE) of inverted perovskite solar cells (PSCs) is still lagging behind that of conventional PSCs, in part because of inefficient carrier transport and poor morphology of hole transport layers (HTLs). We optimized self-assembly of [4-(3,6-dimethyl-9H-carbazol-9-yl)butyl]phosphonic acid (Me-4PACz) onto nickel oxide (NiOx) nanoparticles as an HTL through treatment with hydrogen peroxide, which created a more uniform dispersion of nanoparticles with high conductivity attributed to the formation of Ni3+ as well as surface hydroxyl groups for bonding. A 25.2% certified PCE for a mask size of 0.074 square centimeters was obtained. This device maintained 85.4% of the initial PCE after 1000 hours of stabilized power output operation under 1 sun light irradiation at about 50°C and 85.1% of the initial PCE after 500 hours of accelerated aging at 85°C. We obtained a PCE of 21.0% for a minimodule with an aperture area of 14.65 square centimeters.

Crystallization Regulation by Self-Assembling Liquid Crystal Template Enables Efficient and Stable Perovskite Solar Cells

It is found that the disordered growth of bottom perovskite film deteriorates the buried interface of perovskite solar cells (PSCs), so developing a new material to modify the buried interface for regulating the crystal growth and defect passivation is an effective approach for improving the photovoltaic performance of PSCs. Here, we developed a new ionic liquid crystal (ILC, 1-Dodecyl-3-methylimidazolium tetrafluoroborate) as both crystal regulator and defect passivator to modify the buried interface of PSCs. The high lattice matching between this ILC and perovskite promotes preferential growth of perovskite film along [001] direction, while the oriented ILC with mesomorphic phase has a strong chemical interaction with perovskite to passivate the interface defect, as a result, the modified buried interface exhibits suppressed defects, improved band alignment, reduced nonradiative recombination losses, and enhanced charge extraction. The ILC-modified PSC delivers a power conversion efficiency of 24.92 % and maintains 94 % of the original value after storage in ambient for 3000 h.

Enhanced Quasi-Fermi Level Splitting of Perovskite Solar Cells by Universal Dual-Functional Polymer

Perovskite solar cells (PSCs) have attracted extensive attention due to their higher power conversion efficiency (PCE) and simple fabrication process. However, the open-circuit voltage (VOC ) loss remains a significant impediment to enhance device performance. Here, a facile strategy to boost the VOC to 95.5% of the Shockley-Queisser (S-Q) limit through the introduction of a universal multifunctional polymer additive is demonstrated. This additive effectively passivates the cation and anion defects simultaneously, thereby leading to the transformation from the strong n-type to weak n-type of perovskite films. Benefitting from the energy level alignment and the suppression of bulk non-radiative recombination, the quasi-Fermi level splitting (QFLS) is enhanced.  Consequently, the champion devices with 1.59 eV-based perovskite reach the highest VOC value of 1.24 V and a PCE of 23.86%. Furthermore, this strategy boosts the VOC by at least 0.07 V across five different perovskite systems, a PCE of 25.04% is achieved for 1.57 eV-based PSCs, and the corresponding module (14 cm2 ) also obtained a high PCE of 21.95%. This work provides an effective and universal strategy to promote the VOC approach to the detailed balance theoretical limit.

Enhancing perovskite solar cells efficiency through cesium fluoride mediated surface lead iodide modulation

The presence of an excessive amount of lead iodide on the surface of perovskite solar cells (PSCs) is a significant contributing factor that adversely affects the stability of these devices when exposed to continuous light. To address this issue, we developed an effective strategy involving polishing PbI2 on a perovskite surface using CsF. In this study, we investigated the effects of CsF post-treatment on perovskite films and their photovoltaic properties. The results of the time-resolved photoluminescence and ultraviolet photoelectron spectroscopy tests reveal the significant positive impact of our passivation method based on CsF, which reduces the valence band offset between the perovskite and hole transport layers while simultaneously enhancing the carrier interface transport. PSCs treated with CsF exhibited a photoelectric conversion efficiency (PCE) of 24.25% and an increased fill factor (FF) of 81.72%, which surpassed those of the original PSCs (PCE = 22.12% and FF = 77.40%). Furthermore, after aging for over 2500 h at room temperature and in 30 ± 10% humidity, the PCE of the unpacked PSCs reduced to only 42% of the initial value. Furthermore, the devices treated with CsF maintained their impressive performance, with the PCE maintaining optimal levels at 91% of the initial efficiency.

Low-loss contacts on textured substrates for inverted perovskite solar cells

Inverted perovskite solar cells (PSCs) promise enhanced operating stability compared to their normal-structure counterparts1-3. To improve efficiency further, it is crucial to combine effective light management with low interfacial losses4,5. Here we develop a conformal self-assembled monolayer (SAM) as the hole-selective contact on light-managing textured substrates. Molecular dynamics simulations indicate that cluster formation during phosphonic acid adsorption leads to incomplete SAM coverage. We devise a co-adsorbent strategy that disassembles high-order clusters, thus homogenizing the distribution of phosphonic acid molecules, and thereby minimizing interfacial recombination and improving electronic structures. We report a laboratory-measured power conversion efficiency (PCE) of 25.3% and a certified quasi-steady-state PCE of 24.8% for inverted PSCs, with a photocurrent approaching 95% of the Shockley-Queisser maximum. An encapsulated device having a PCE of 24.6% at room temperature retains 95% of its peak performance when stressed at 65 °C and 50% relative humidity following more than 1,000 h of maximum power point tracking under 1 sun illumination. This represents one of the most stable PSCs subjected to accelerated ageing: achieved with a PCE surpassing 24%. The engineering of phosphonic acid adsorption on textured substrates offers a promising avenue for efficient and stable PSCs. It is also anticipated to benefit other optoelectronic devices that require light management.

Rationally Tailoring Chiral Molecules to Minimize Interfacial Energy Loss Enables Efficient and Stable Perovskite Solar Cells Using Vacuum Flash Technology

Facing the defects and energy barrier at the interface of perovskite solar cells, we propose a chiral molecule engineering strategy to simultaneously heal interfacial defects and regulate interfacial energy band alignment. S-ibuprofen (S-IBU), R-ibuprofen (R-IBU), and racemic ibuprofen (rac-IBU) are used to post-treat perovskite films. rac-IBU molecules possess the strongest anchoring on the surface of perovskites among all chiral molecules, translating into the best defect passivation effect. The hydrophobic isobutyl group and benzene ring could increase the film moisture resistance ability. Due to reduced interfacial defects and interfacial energy barrier, rac-IBU enables efficient devices with a maximum efficiency exceeding 24% based on vacuum flash technology without antisolvents. The encapsulated rac-IBU-modified device could maintain 90% of its initial performance after 1040 h of continuous maximum power point tracking. This work provides a feasible route to minimize interfacial nonradiative recombination losses by controlling spatial conformation via rational chiral molecule engineering.

Air-processed MAPbI3 perovskite solar cells achieve 20.87% efficiency and excellent bending resistance enabled via a polymer dual-passivation strategy

In recent years, air-processed MAPbI3 perovskite solar cells (PSCs) have attracted widespread interest from researchers worldwide because of their simple and low-cost fabrication process. Nonetheless, the ambient conditions usually bring about many adverse effects, such as imperfect crystallization and numerous defects in perovskite films, which seriously impact both the photoelectric performance and stability of the device. Therefore, in this work, a polymer dual-passivation strategy was employed by introducing ammonium polyphosphate (APP) as an additive to the green anti-solvent to accurately modify the perovskite layer. APP, which has abundant phosphate and ammonium groups, could simultaneously fill the I/Pb vacancies by Lewis acid-base reactions to restrain defect formation and improve the power conversion efficiency (PCE) of the ultimate device. On the other hand, the long molecular chains of the polymer with a certain flexural ability were easily congregated at the grain boundaries of the perovskite grains, thus enhancing the bending resistance. Consequently, high-quality perovskite films with a dense morphology and large grain size were obtained. Because of the reduced defect density and suppressed non-radiative recombination, the optimal PSC attained a champion PCE of 20.87% with negligible hysteresis. Furthermore, the non-encapsulated APP-modified flexible device also exhibited excellent bending resistance. Only 20% of its normalized PCE was lost after 150 bending cycles at room temperature. This simple, green, low-cost, and reliable strategy for preparing high-efficiency PSCs with good stability can facilitate its commercialization.

Investigating the Photovoltaic Performance in ABO3 Structures via the Nonlinear Bond Model for an Arbitrary Incoming Light Polarization

ABO3 structures commonly known as perovskite are of high importance in advanced material science due to their interesting optical properties. Applications range from tunable band gaps, high absorption coefficients, and versatile electronic properties, making them ideal for solar cells to light-emitting diodes and even photodetectors. In this work, we present, for the first time, a nonlinear phenomenological bond model analysis of second harmonic generation (SHG) in tetragonal ABO3 with arbitrary input light polarization. We study the material symmetry and explore the strength of the nonlinear generalized third-rank tensorial elements, which can be exploited to produce a high SHG response if the incoming light polarization is correctly selected. We found that the calculated SHG intensity profile aligns well with existing experimental data. Additionally, as the incoming light polarization varies, we observed a smooth shift in the SHG intensity peak along with changes in the number of peaks. These observations confirm the results from existing rotational anisotropy SHG experiments. In addition, we show how spatial dispersion can contribute to the total SHG intensity. Our work highlights the possibility of studying relatively complex structures, such as ABO3, with minimal fitting parameters due to the power of the effective bond vector structure, enabling the introduction of an effective SHG hyperpolarizability rather than a full evaluation of the irreducible SHG tensor by group theoretical analysis. Such a simplification may well lead to a better understanding of the nonlinear properties in these classes of material and, in turn, can improve our understanding of the photovoltaic performance in ABO3 structures.

Compact Hole-Selective Self-Assembled Monolayers Enabled by Disassembling Micelles in Solution for Efficient Perovskite Solar Cells

Self-assembled monolayers (SAMs) are widely employed as effective hole-selective layers (HSLs) in inverted perovskite solar cells (PSCs). However, most SAM molecules are amphiphilic in nature and tend to form micelles in the commonly used alcoholic processing solvents. This introduces an extra energetic barrier to disassemble the micelles during the binding of SAM molecules on the substrate surface, limiting the formation of a compact SAM. To alleviate this problem for achieving optimal SAM growth, a co-solvent strategy to disassemble the micelles of carbazole-based SAM molecules in the processing solution is developed. This effectively increases the critical micelle concentration to be above the processing concentration and enhances the reactivity of the phosphonic acid anchoring group to allow densely packed SAMs to be formed on indium tin oxide. Consequently, the PSCs derived from using MeO-2PACz, 2PACz, and CbzNaph SAM HSLs show universally improved performance, with the CbzNaph SAM-derived device achieving a champion efficiency of 24.98% and improved stability.

Complete Peripheral Fluorination of the Small-Molecule Acceptor in Organic Solar Cells Yields Efficiency over 19

Due to the intrinsically flexible molecular skeletons and loose aggregations, organic semiconductors, like small molecular acceptors (SMAs) in organic solar cells (OSCs), greatly suffer from larger structural/packing disorders and weaker intermolecular interactions comparing to their inorganic counterparts, further leading to hindered exciton diffusion/dissociation and charge carrier migration in resulting OSCs. To overcome this challenge, complete peripheral fluorination was performed on basis of a two-dimensional (2D) conjugation extended molecular platform of CH-series SMAs, rendering an acceptor of CH8F with eight fluorine atoms surrounding the molecular backbone. Benefitting from the broad 2D backbone, more importantly, strengthened fluorine-induced secondary interactions, CH8F and its D18 blends afford much enhanced and more ordered molecular packings accompanying with enlarged dielectric constants, reduced exciton binding energies and more obvious fibrillary networks comparing to CH6F controls. Consequently, D18:CH8F-based OSCs reached an excellent efficiency of 18.80 %, much better than that of 17.91 % for CH6F-based ones. More excitingly, by employing D18-Cl that possesses a highly similar structure to D18 as a third component, the highest efficiency of 19.28 % for CH-series SMAs-based OSCs has been achieved so far. Our work demonstrates the dramatical structural multiformity of CH-series SMAs, meanwhile, their high potential for constructing record-breaking OSCs through peripheral fine-tuning.

Stabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells

P-i-n geometry perovskite solar cells (PSCs) offer simplified fabrication, greater amenability to charge extraction layers, and low-temperature processing over n-i-p counterparts. Self-assembled monolayers (SAMs) can enhance the performance of p-i-n PSCs but ultrathin SAMs can be thermally unstable. We report a thermally robust hole-selective layer comprised of nickel oxide (NiOx) nanoparticle film with a surface-anchored (4-(3,11-dimethoxy-7H-dibenzo[c,g]carbazol-7-yl)butyl)phosphonic acid (MeO-4PADBC) SAM that can improve and stabilize the NiOx/perovskite interface. The energetic alignment and favorable contact and binding between NiOx/MeO-4PADBC and perovskite reduced the voltage deficit of PSCs with various perovskite compositions and led to strong interface toughening effects under thermal stress. The resulting 1.53-electron-volt devices achieved 25.6% certified power conversion efficiency and maintained >90% of their initial efficiency after continuously operating at 65 degrees Celsius for 1200 hours under 1-sun illumination.

Dual-Ligand ZIF-8 Bearing the Cyano Group for Efficient and Selective Uranium Capture from Seawater

Uranium extraction from seawater is a potential technique that will change the world. Adsorption capacity, selectivity, and antibacterial ability for high-performance uranium adsorbents remain the major challenges. In this study, a dual-ligand zeolitic imidazolate framework 8 (ZIF-8) decorated with cyano groups (ZIF-8-CN) is prepared via a facile blend strategy at room temperature. Owing to the abundant mesopores and nitrogen functional groups, ZIF-8-CN shows an extremely high uranium uptake of 1000 mg/g at pH = 6, which is 2.42 times that of pristine ZIF-8. Noteworthily, ZIF-8-CN possesses a 16.2 mg/g uranium adsorption in natural seawater within 28 days, and the distribution coefficient (Kd = 3.25 × 106 mL/g) is far greater than that for other coexisting metal ions, demonstrating a marked preference for uranyl ions. Except for the coordination between uranium and nitrogen in imidazole, the cyano groups provide additional adsorption sites and preferentially bind to uranyl, thereby strengthening the affinity for uranyl. Notably, ZIF-8-CN displays ultrastrong antimicrobial ability against both Escherichia coli and Staphylococcus aureus, which is greatly desired for the scale-up marine tests. Our study demonstrates the high potential of ZIF-8-CN in uranium capture and provides a wide scope for the application of mixed-ligand MOFs.

Dual-Interface Engineering in Perovskite Solar Cells with 2D Carbides

Passivating the interfaces between the perovskite and charge transport layers is crucial for enhancing the power conversion efficiency (PCE) and stability in perovskite solar cells (PSCs). Here we report a dual-interface engineering approach to improving the performance of FA0.85 MA0.15 Pb(I0.95 Br0.05 )3 -based PSCs by incorporating Ti3 C2 Clx Nano-MXene and o-TB-GDY nanographdiyne (NanoGDY) into the electron transport layer (ETL)/perovskite and perovskite/ hole transport layer (HTL) interfaces, respectively. The dual-interface passivation simultaneously suppresses non-radiative recombination and promotes carrier extraction by forming the Pb-Cl chemical bond and strong coordination of π-electron conjugation with undercoordinated Pb defects. The resulting perovskite film has an ultralong carrier lifetime exceeding 10 μs and an enlarged crystal size exceeding 2.5 μm. A maximum PCE of 24.86 % is realized, with an open-circuit voltage of 1.20 V. Unencapsulated cells retain 92 % of their initial efficiency after 1464 hours in ambient air and 80 % after 1002 hours of thermal stability test at 85 °C.

Synergistic Surface Defect Passivation of Ionic Liquids for Efficient and Stable MAPbI3-Based Inverted Perovskite Solar Cells

Organic-inorganic hybrid perovskite solar cells are fabricated using polycrystalline perovskite thin films, which possess high densities of point and surface defects. The surface defects of perovskite thin films are the key factors that affect the device performance. Therefore, the reduction of harmful defects is the primary task for improving device performance. Therefore, in this study, high-quality perovskite thin films are prepared using an ionic liquid, dithiocarbamate diethylamine (DADA), to passivate the interface. The electron-rich sulfur atom in the DADA molecule chelates with the uncoordinated lead ion in the perovskite films, and the diethylammonium cation forms a hydrogen bond with the free iodine ion, which further improves the passivation. The synergistic passivation and improved morphology of the perovskite thin films substantially reduce the number of charged defects on the film surface and prolong the carrier lifetime. In addition, the DADA surface treatment increases the work function of the perovskite film, which is beneficial for carrier transport. Under standard solar-lighting conditions, the power conversion efficiency (PCE) of the device increases from 19.13 to 21.36%, and the fill factor is as high as 83.17%. Owing to both the hydrophobicity of DADA molecules and the passivation of ion defects, the PCE of the device remains above 80%, even for the device stored for 500 h in air at a relative humidity of 65%, and the device stability is substantially improved.

Unlocking The Role of Guanidinium Salts in Interface Engineering for Boosted Performance of Inverted Perovskite Solar Cells

NiOx-based inverted perovskite solar cells (PSCs) have attracted growing attention due to their low cost and large-scale application potential. However, the efficiency and stability of inverted planar heterojunction PSCs is still unsatisfactory owing to insufficient charge-extraction caused by undesirable interfacial contact between perovskite and NiOx hole transport layers (HTLs). Herein an interfacial passivation strategy with guanidinium salts (guanidinium thiocyanate (GuASCN), guanidine hydrobromide (GuABr), guanidine hydriodate (GuAI)) as passivator is employed to solve this problem. We systematically study the effect of various guanidinium salts on the crystallinity, morphology, and photophysical properties of perovskite films. Guanidine salt as interfacial passivator can decrease interface resistance, reduce carrier non-radiative recombination, and boost carrier extraction. Notably, the GuABr-treated unencapsulated devices can still maintain more than 90 % of their initial PCE after aging for 1600 h at 16-25 °C and 35 %-50 % relative humidity in ambient conditions. This work reveals the significance of counterions in improving the photovoltaic performance and stability of PSCs.

Unveiling Charge-Transfer Dynamics at Singlet Fission Layer/Hybrid Perovskite Interface

Singlet fission (SF) materials have been applied in various types of solar cells to pursue higher power conversion efficiency (PCE) beyond the Shockley-Queisser (SQ) limit. SF implementation in perovskite solar cells has not been successfully realized yet due to the insufficient understanding of the SF/perovskite heterojunctions. In this work, we attempt to elucidate the charge dynamics of an SF/perovskite system by incorporating a well-known SF molecule, TIPS-pentacene, and a triple-cation perovskite Cs0.05(FA0.85MA0.15)0.95PbI2.55Br0.45, owing to their well-matched energy structures. The transient absorption spectra and kinetic fitting plots suggest an electron-transfer process from the triplet state of TIPS-pentacene to perovskite in the picosecond regime, which increases the carrier density by 20% in the perovskite layer. This work confirms the existence of an electron-transfer process between the SF material and perovskite, providing a pathway to SF-enhanced perovskite solar cells.

Dopant-Free Hole-Transporting Material Based on Poly(2,7-(9,9-bis(N,N-di-p-methoxylphenylamine)-4-phenyl))-fluorene for High-Performance Air-Processed Inverted Perovskite Solar Cells

It is a great challenge to develop low-cost and dopant-free polymer hole-transporting materials (HTM) for PSCs, especially for efficient air-processed inverted (p-i-n) planar PSCs. A new homopolymer HTM, poly(2,7-(9,9-bis(N,N-di-p-methoxylphenyl amine)-4-phenyl))-fluorene (denoted as PFTPA), with appropriate photo-electrochemical, opto-electronic and thermal stability, was designed and synthesized in two steps to meet this challenge. By employing PFTPA as dopant-free hole-transport layer in air-processed inverted PSCs, a champion power conversion efficiency (PCE) of up to 16.82% (0.1 cm²) was achieved, much superior to that of commercial HTM PEDOT:PSS (13.8%) under the same conditions. Such a superiority is attributed to the well-aligned energy levels, improved morphology, and efficient hole-transporting, as well as hole-extraction characteristics at the perovskite/HTM interface. In particular, these PFTPA-based PSCs fabricated in the air atmosphere maintain a long-term stability of 91% under ambient air conditions for 1000 h. Finally, PFTPA as the dopant-free HTM was also fabricated the slot-die coated perovskite device through the same fabrication condition, and a maximum PCE of 13.84% was obtained. Our study demonstrated that the low-cost and facile homopolymer PFTPA as the dopant-free HTM are potential candidates for large-scale production perovskite solar cell.