Dissolution mechanism of calcium apatites in acids: A review of literature

Biodegradable calcium phosphate nanoparticles for cancer therapy

Calcium phosphate is the inorganic mineral of hard tissues such as bone and teeth. Due to their similarities to the natural bone, calcium phosphates are highly biocompatible and biodegradable materials that have found numerous applications in dental and orthopedic implants and bone tissue engineering. In the form of nanoparticles, calcium phosphate nanoparticles (CaP's) can also be used as effective delivery vehicles to transfer therapeutic agents such as nucleic acids, drugs, proteins and enzymes into tumor cells. In addition, facile preparation and functionalization of CaP's, together with their inherent properties such as pH-dependent solubility provide advantages in delivery and release of these bioactive agents using CaP's as nanocarriers. In this review, the challenges and achievements in the intracellular delivery of these agents to tumor cells are discussed. Also, the most important issues in the design and potential applications of CaP-based biominerals are addressed with more focus on their biodegradability in tumor microenvironment.

Chemical production of acidified activated carbon and its influences on soil fertility comparative to thermo-pyrolyzed biochar

Biochar (BC) is gaining attention day by day due to its potential benefits for the improvement in degraded soil health. During its production by pyrolysis, carbon sequestration is an important aspect that makes it environment-friendly amendment. However, 100% anaerobic combustion of waste at such a high temperature decreases its adaptability to produce BC at commercial scale. On the other hand, the alkaline nature of BC also causes adverse effects on soil health when used in alkaline soils. Keeping in mind the problem of BC production and its high pH, current experiment was conducted to introduce chemical production of acidified activated carbon (AAC) and its effects on soil nutrients status comparative to high temperature pyrolyzed BC. As compared to thermal pyrolysis, sulphuric acid produce acidified activated carbon in minimum time and large in quantity. Sulphuric acid produces acidified activated carbon, fix higher carbon as compared to thermal pyrolyzed BC. Results also showed that application of 2% AAC was far better for decreasing alkaline soil pHs (3.52 and 4.71%) and ECe (45.2 and 71.4%) as compared to control in clay and sandy clay loam. A significant maximum increase in available P (117.5 and 25.9%), extractable Zn (42.0 and 52.2%), B (111.4 and 46.2%) and Fe (59.5 and 34.4%) in clay and sandy clay texture soils also validated the efficacious functioning of AAC over BC and control. It is concluded that sulphuric acid use is an easier and adaptable method to produce activated carbon at commercial scale. As compared to thermal pyrolyzed BC, application of AAC could be more effective in the improvement of soil health and fertility status.

Leaching mechanism of bioapatite in carbonate-saturated water

Bioapatite, the main inorganic component of bone, is similar to hydroxyapatite (HAp, Ca₅[PO₄]₃(OH)) having some [CO₃]²⁻ content which plays an important role in leaching/precipitation processes in many biological lesions.

Characterisation of ashes from waste biomass power plants and phosphorus recovery

Biowastes, such as meat and bone meal (MBM), and poultry litter (PL), are used as energy sources for industrial combustion in the UK. However, the biomass ashes remaining after combustion, which contain nutrients such as phosphorus, are landfilled rather than utilised. To promote their utilisation, biomass ashes from industries were characterised in terms of their elemental and mineral compositions, phosphorus extractability, and pH-dependent leachability. These ashes were highly alkaline (pH as high as 13), and rich in calcium and phosphorus. The P bio-availabilities in the ash evaluated by Olsen's extraction were low. Hydroxyapatite and potassium sodium calcium phosphate were identified by X-ray powder diffraction (XRD) as the major phases in the MBM and PL ashes, respectively. The leaching of P, Ca, and many other elements was pH dependent, with considerable increase in leaching below about pH 6. P recovery by acid dissolution (e.g., with H₂SO₄) seems feasible and promising; the optimized acid consumption for ~90% P recovery could be as low as 3.2-5.3 mol H⁺/mol P.

Self-fluorescent antibiotic MoOx-hydroxyapatite: a nano-theranostic platform for bone infection therapies

Nowadays, the repair of large-size bone defects represents a huge medical challenge. A line of attack is the construction of advanced biomaterials having multifunctional properties. In this work, we show the creation of biocompatible MoOx-hydroxyapatite nanoparticles (nano-HA/MoOx) that simultaneously exhibit self-activated fluorescence and antibiotic skills. Along this text, we demonstrate that the insertion of molybdenum, an essential trace element, into the non-stoichiometric calcium deficient hydroxyapatite lattice generates intrinsic electronic point defects that exacerbate its epifluorescence blue emission and provokes new red emissions, preserving, always, its bioactivity. Furthermore, these point defects, acting as electron acceptors, stimulate the materials' biological redox status and promote the death of pathogen microorganisms after their direct contact. A putative mechanism, by which bacteria lose electrons from their metabolic circuit that alter the function of their cytoplasmic membrane and potentially die, agrees with our results. Our findings highlight the importance of tuning the electronic communications between biomaterial interfaces and biological units, and support the use of self-fluorescent MoOx-hydroxyapatite nanoparticles as fundamental building blocks for new real-time imaging platforms against bone infection.

In Vitro Activity Assays of Sputtered HAp Coatings with SiC Addition in Various Simulated Biological Fluids

Considering the requirements of medical implantable devices, it is pointed out that biomaterials should play a more sophisticated, longer-term role in the customization and optimization of the material–tissue interface in order to ensure the best long-term clinical outcomes. The aim of this contribution was to assess the performance of silicon carbide–hydroxyapatite in various simulated biological fluids (Dulbecco’s modified Eagle’s medium (DMEM), simulated body fluid (SBF), and phosphate buffer solution (PBS)) through immersion assays for 21 days at 37 ± 0.5 °C and to evaluate the electrochemical behavior. The coatings were prepared on Ti6Al4V alloy substrates by magnetron sputtering method using two cathodes made of hydroxyapatite and silicon carbide (SiC). After immersion assays the coating’s surface was analyzed in terms of morphology, chemical and phase composition, and chemical bonds. According to the electrochemical behavior in the media investigated at 37 ± 0.5 °C, SiC addition inhibits the dissolution of the hydroxyapatite in DMEM acellular media. Furthermore, after adding SiC, the slow degradation of hydroxyapatite in PBS and SBF media as well as biomineralization in DMEM were observed.

Structure degradation and strength changes of sintered calcium phosphate bone scaffolds with different phase structures during simulated biodegradation in vitro

The structure degradation and strength changes of calcium phosphate scaffolds after long-term exposure to an acidic environment simulating the osteoclastic activity were determined and compared. Sintered calcium phosphate scaffolds with different phase structures were prepared with a similar cellular pore structure and an open porosity of over 80%. Due to microstructural features the biphasic calcium phosphate (BCP) scaffolds had a higher compressive strength of 1.7 MPa compared with the hydroxyapatite (HA) and β-tricalcium phosphate (TCP) scaffolds, which exhibited a similar strength of 1.2 MPa. After exposure to an acidic buffer solution of pH = 5.5, the strength of the HA scaffolds did not change over 14 days. On the other hand, the strength of the TCP scaffolds decreased steeply in the first 2 days and reached a negligible value of 0.09 MPa after 14 days. The strength of the BCP scaffolds showed a steady decrease with a reasonable value of 0.5 MPa after 14 days. The mass loss, phase composition and microstructural changes of the scaffolds during degradation in the acidic environment were investigated and a mechanism of scaffold degradation was proposed. The BCP scaffold showed the best cell response in the in vitro tests. The BCP scaffold structure with the highly soluble phase (α-TCP) embedded in a less soluble matrix (β-TCP/HA) exhibited a controllable degradation with a suitable strength stability and with beneficial biological behavior it represented the preferred calcium phosphate structure for a resorbable bone scaffold.

Biomimetic mineralization on natural and synthetic polymers to prepare hybrid scaffolds for bone tissue engineering

To mimic the mineral component and the microstructure of natural bone, nanohydroxyapatite (nHAP)/polymer (natural and synthetic materials) composite scaffolds with micropore structures and good mechanical performance were prepared via the assistance of sonication and amidation. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) showed the biomimetic homogeneous formation of nHAP in the polymer matrix. Fourier transform infrared spectroscopy (FTIR) indicated that the polymer matrix regulated the crystallization of nHAP. The integration of synthetic/natural polymers benefited nHAP crystallization in the polymer matrix and thus improved the mechanical performance of the chitosan (CS)/collagen (Col)/ poly (lactic acid) (PLA)/nHAP scaffolds. The in vitro bioactivity ability was investigated by incubating in a simulated body fluid (SBF). The methyl thiazolyl tetrazolium (MTT) test, the acridine orange/ethidium bromide (AO/EB) and Giemsa staining showed that the scaffolds had good biocompatibility and could maintain the cell growth. Therefore, the CS/Col/PLA/nHAP scaffold is promising for bone tissue engineering applications.

Biomimetic transformation of polyphosphate microparticles during restoration of damaged teeth

OBJECTIVE

In the present study, we investigated the fusion process between amorphous microparticles of the calcium salt of the physiological polymer comprising orthophosphate units, of inorganic polyphosphate (polyP), and enamel.

METHODS

This polymer was incorporated as an ingredient into toothpaste and the fusion process was studied by electron microscopy and by synchrotron-based X-ray tomography microscopy (SRXTM) techniques.

RESULTS

The data showed that toothpaste, supplemented with the amorphous Ca-polyP microparticles (aCa-polyP-MP), not only reseals tooth defects on enamel, like carious lesions, and dentin, including exposed dentinal tubules, but also has the potential to induce re-mineralization in the enamel and dentin regions. The formation of a regeneration mineralic zone on the tooth surface induced by aCa-polyP-MP was enhanced upon exposure to artificial saliva, as demonstrated by SRXTM. Energy dispersive X-ray analysis revealed an increase in the calcium/phosphorus atomic ratio of the enamel deposits to values characteristic for the particles during the treatment with polyP applied in the toothpaste, indicating a fusion of the particles with the tooth mineral.

SIGNIFICANCE

Our results suggest that toothpaste enriched with aCa-polyP-MP is a promising biomimetic material for accelerating enamel and dentin restoration.

Enhanced Delivery of F-, Ca2+, K+, and Na+ Ions into Enamel by Electrokinetic Flows

As the outermost layer of the tooth crown, dental enamel is the most mineralized tissue in mammals, consisting of hydroxyapatite crystallites separated by long and narrow nanochannels. A major challenge in dentistry is how various molecules can be infiltrated into these nanopores in an efficient and controlled way. Here we show a robust method to transport various ions of interest, such as fluoride (F^-), potassium (K⁺), calcium (Ca⁺⁺), and sodium (Na⁺), into these nanopores by electrokinetic flows. It is verified by fluorescence microscopy, laser-scanning confocal microscopy, mass spectrometry, and ion selective electrode technique. Different ions are demonstrated to infiltrate through the entire depth of the enamel layer (~1 mm), which is significantly enhanced penetration compared with diffusion-based infiltration. Meanwhile, transport depth and speed can be controlled by infiltration time and applied voltage. This is the first demonstration of reliably delivering both anions and cations into the enamel nanopores. This technique opens opportunities in caries prevention, remineralization, tooth whitening, and nanomedicine delivery in clinical dentistry, as well as other delivery challenges into various biomaterials such as bones.

Characterization and influence of hydroxyapatite nanopowders on living cells

Nanomaterials, such as hydroxyapatite nanoparticles show a great promise for medical applications due to their unique properties at the nanoscale. However, there are concerns about the safety of using these materials in biological environments. Despite a great number of published studies of nanoobjects and their aggregates or agglomerates, the impact of their physicochemical properties (such as particle size, surface area, purity, details of structure and degree of agglomeration) on living cells is not yet fully understood. Significant differences in these properties, resulting from different manufacturing methods, are yet another problem to be taken into consideration. The aim of this work was to investigate the correlation between the properties of nanoscale hydroxyapatite from different synthesis methods and biological activity represented by the viability of four cell lines: A549, CHO, BEAS-2B and J774.1 to assess the influence of the nanoparticles on immune, reproductive and respiratory systems.

Dependence of the interaction mechanisms between L-serine and O-phospho-L-serine with calcium hydroxyapatite and copper modified hydroxyapatite in relation with the acidity of aqueous medium

Motivated by the role of copper ions in biological processes the aim of this study was to elucidate the impact of copper ions bound to hydroxyapatite on L-serine (L-Ser) and O-phospho-L-serine (O-Ph-L-Ser) adsorption at different acidity of aqueous solutions. The adsorption phenomenon was studied by FTIR, UV, and AA spectroscopy, XRD and thermal analysis methods together with the evolved gases analysis taking into consideration the ionic state of the amino acids as well as the apatite surface state, which are tightly correlated with the solution pH. In acidic solution, the main process involves apatite dissolution releasing calcium and copper ions. At pH > 5 the complexation of amino acids with Ca²⁺ or Cu²⁺ ions is more important leading also to the release of cations. The ability of copper ions to form water soluble complexes with L-Ser and O-Ph-L-Ser leads to an important loss of these ions, while calcium release is very low at this pH. Therefore, the use of copper ions substituting calcium in the apatite structure to enhance the ability of amino acids adsorption on the apatite surface seems problematic even at pH > 5.

Calcium and phosphate ions as simple signaling molecules with versatile osteoinductivity

Due to the continually increasing clinical need to heal large bone defects, synthetic bone graft substitutes have become ever more necessary with calcium phosphates (CaP) widely used due to their similarity to the mineral component of bone. In this research, different concentrations of calcium ions (Ca²⁺), phosphate ions (P_i), or their combination were provided to mesenchymal stem cells (MSCs) to evaluate their influence on proliferation and differentiation. The results suggest that 1-16 mM Ca²⁺ and 1-8 mM P_i is osteoinductive, but not cytotoxic. Furthermore, three distinct calcium phosphates (i.e. monobasic, dibasic, and hydroxyapatite) with different dissolution rates were investigated for their Ca²⁺ and P_i release. These biomaterials were then adjusted to release ion concentrations within the established therapeutics window for which MSC bioactivity was assessed. These findings suggest that CaP-based biomaterials can be leveraged to achieve Ca²⁺ and P_i dose-dependent osteoinduction for bone regenerative engineering applications.

Effect of Citric Acid Surface Modification on Solubility of Hydroxyapatite Nanoparticles

Worldwide, there is an amplified interest in nanotechnology-based approaches to develop efficient nitrogen, phosphorus, and potassium fertilizers to address major challenges pertaining to food security. However, there are significant challenges associated with fertilizer manufacture and supply as well as cost in both economic and environmental terms. The main issues relating to nitrogen fertilizer surround the use of fossil fuels in its production and the emission of greenhouse gases resulting from its use in agriculture; phosphorus being a mineral source makes it nonrenewable and casts a shadow on its sustainable use in agriculture. This study focuses on development of an efficient P nutrient system that could overcome the inherent problems arising from current P fertilizers. Attempts are made to synthesize citric acid surface-modified hydroxyapatite nanoparticles using wet chemical precipitation. The resulting nanohybrids were characterized using powder X-ray diffraction to extract the crystallographic data, while functional group analysis was done by Fourier transform infrared spectroscopy. Morphology and particle size were studied using scanning electron microscopy along with elemental analysis using energy-dispersive X-ray diffraction spectroscopy. Its effectiveness as a source of P was investigated using water release studies and bioavailability studies using Zea mays as the model crop. Both tests demonstrated the increased availability of P from nanohybrids in the presence of an organic acid compared with pure hydroxyapatite nanoparticles and rock phosphate.

A Novel Kinetic Method to Measure Apparent Solubility Product of Bulk Human Enamel

Introduction: Tooth enamel mineral loss is influenced by its solubility product value, which is fundamental to the understanding of de- and remineralization resulting from a carious or erosive challenge. Published pKsp values for human enamel and hydroxyapatite range from 110 to 126 suggesting a heterogeneous nature of enamel solubility. However, this range of values may also result from the variety of methods used, e.g., some authors reporting values for suspensions of enamel powder and others for bulk enamel. The aim of this study was to develop a method to measure the solubility of bulk human enamel under controlled in vitro conditions simulating demineralization behavior of enamel within the oral environment using scanning microradiography (SMR). SMR was used to monitor real-time changes in enamel demineralization rates at increasing calcium concentrations in a caries simulating demineralization solution until the concentration at which thermodynamic equilibrium between enamel and solution was achieved. Method: 2 mm thick caries free erupted human enamel slabs with the natural buccal surfaces exposed were placed in SMR cells exposed to circulating caries-simulating 2.0 L 0.1 M pH = 4.0 acetic acid, at 25°C. SMR was used to continuously measure in real-time the decrease in mineral mass during the demineralization at 5 different points from on each slab. Demineralization rates were calculated from a linear regression curve of projected mineral mass against demineralization time. Changes in the demineralization rates were monitored following a series of successive increases in calcium (and phosphate at hydroxyapatite stoichiometric ratios of Ca:P 1.67) were added to the demineralizing solution, until demineralization ceased. The pH was maintained constant throughout. Results: Demineralization halted when the calcium concentration was ~30 mM. At higher calcium concentrations, mineral deposition (remineralization) occurred. By comparison with results from speciation software calculations for the calcium phosphate ternary system, this result suggests that the bulk solubility product of enamel (pKsp_BEnamel) under the conditions used is 121. Discussion: The apparent pKsp_BEnamel under these conditions was higher than many previous reported values, and much closer to those previously reported for HAp. However, this is a bulk value, and does not reflect that enamel is a heterogeneous material, nor the influence of ionic inclusions.

Calcium orthophosphates (CaPO4): Occurrence and properties

The present overview is intended to point the readers' attention to the important subject of calcium orthophosphates (CaPO4). This type of materials is of the special significance for the human beings because they represent the inorganic part of major normal (bones, teeth and antlers) and pathological (those appearing due to various diseases) calcified tissues of mammals. For example, atherosclerosis results in blood vessel blockage caused by a solid composite of cholesterol with CaPO4, while dental caries (tooth decay) and osteoporosis (a low bone mass with microarchitectural changes) mean a partial decalcification of teeth and bones, respectively, that results in replacement of a less soluble and harder biological apatite by more soluble and softer calcium hydrogenorthophosphates. Due to the compositional similarities to the calcified tissues of mammals, CaPO4 are widely used as biomaterials for bone grafting purposes. In addition, CaPO4 have many other applications. Thus, there is a great significance of CaPO4 for the humankind and, in this paper, an overview on the current knowledge on this subject is provided.

Two types of bone necrosis in the Middle Triassic Pistosaurus longaevus bones: the results of integrated studies

Avascular necrosis, diagnosed on the basis of either a specific pathological modification of the articular surfaces of bone or its radiologic appearance in vertebral centra, has been recognized in many Mesozoic marine reptiles as well as in present-day marine mammals. Its presence in the zoological and paleontologic record is usually associated with decompression syndrome, a disease that affects secondarily aquatic vertebrates that could dive. Bone necrosis can also be caused by infectious processes, but it differs in appearance from decompression syndrome-associated aseptic necrosis. Herein, we report evidence of septic necrosis in the proximal articular surface of the femur of a marine reptile, Pistosaurus longaevus, from the Middle Triassic of Poland and Germany. This is the oldest recognition of septic necrosis associated with septic arthritis in the fossil record so far, and the mineralogical composition of pathologically altered bone is described herein in detail. The occurrence of septic necrosis is contrasted with decompression syndrome-associated avascular necrosis, also described in Pistosaurus longaevus bone from Middle Triassic of Germany.

Manipulation of Mg2+-Ca2+ Switch on the Development of Bone Mimetic Hydroxyapatite

Ionic substitution can affect essential physicochemical properties leading to a specific biological behavior upon implantation. Therefore, it has been proposed as a tool to increase the biological efficiency of calcium phosphate based materials. In the following study, we have evaluated the contribution of an important cation in nature, Mg²⁺, into the structure of previously studied biocompatible and biodegradable hydroxyapatite (HA) nanorods and its subsequent effect on its chemical, morphology, and bone mimetic articulation. Mg²⁺-substituted HA samples were synthesized by an aqueous wet-chemical precipitation method, followed by an hydrothermal treatment involving a Mg²⁺ precursor that partially replace Ca²⁺ ions into HA crystal lattice; Mg²⁺ concentrations were modulated to obtain a nominal composition similar to that exists in calcified tissues. Hydrothermally synthesized Mg²⁺-substituted HA nanoparticles were characterized by X-ray powder diffraction, FT-NIR and EDX spectroscopies, field emission scanning and high resolution transmission electron microscopies (FE-SEM, H-TEM). Molecular modeling combining ab initio methods and power diffraction data were also performed. Results showed that Mg²⁺-substitution promoted the formation of calcium deficient HA (cdHA) where Mg²⁺ replacement is energetically favored at Ca(1) position in a limited and specific amount directing the additional Mg²⁺ toward the surface of the crystal. The control of Mg²⁺ incorporation into HA nanorods gave rise to a tailored crystallinity degree, cell parameters, morphology, surface hydration, solubility, and degradation properties in a dose-replacement dependent manner. The obtained materials show qualities that conjugated together to drive an optimal in vitro cellular viability, spreading, and proliferation confirming their biocompatibility. In addition, an improved adhesion of osteoblast was evidenced after Mg²⁺-Ca²⁺ substitution.

In vivo distribution of zoledronic acid in a bisphosphonate-metal complex-based nanoparticle formulation synthesized by a reverse microemulsion method

Bisphosphonates are used to treat bone diseases such as osteoporosis and cancer-induced bone pain and fractures. It is thought that modifying the pharmacokinetics and biodistribution profiles of bisphosphonates (i.e. rapid renal clearance and extensive bone absorption) will not only reduce their side effects, but also expand their clinical applications to extraskeletal tissues. In the present work, using zoledronic acid (Zol) and calcium as model bisphosphonate and metal molecules, respectively, we prepared DOPA (an anionic lipid)-coated spherical Zol-Ca nanocomposites (Zol-Ca@DOPA) and developed Zol-nanoparticle formulations (i.e. Zol-Ca@bi-lipid NPs) based on the nanocomposites. The influence of the inputted weight ratio of Zol-Ca@DOPA to DSPE-PEG_2k on the properties (e.g. size, size distribution, loading efficiency, encapsulation efficiency, zeta potential, and polydispersity) of Zol-Ca@bi-lipid NPs was investigated, and a type of Zol-Ca@bi-lipid NPs with size around 25nm was selected for further studies. In a mouse model, the Zol-Ca@bi-lipid NPs significantly reduced the bone distribution of Zol, increased the blood circulating time of Zol, and altered the distribution of Zol in major organs, as compared to free Zol. It is expected that similar nanoparticles prepared with bisphosphonate-metal complexes can be explored to expand the applications to bisphosphonates in extraskeletal tissues.

Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical Applications

Calcium phosphate (CaP) bioceramics are widely used in the field of bone regeneration, both in orthopedics and in dentistry, due to their good biocompatibility, osseointegration and osteoconduction. The aim of this article is to review the history, structure, properties and clinical applications of these materials, whether they are in the form of bone cements, paste, scaffolds, or coatings. Major analytical techniques for characterization of CaPs, in vitro and in vivo tests, and the requirements of the US Food and Drug Administration (FDA) and international standards from CaP coatings on orthopedic and dental endosseous implants, are also summarized, along with the possible effect of sterilization on these materials. CaP coating technologies are summarized, with a focus on electrochemical processes. Theories on the formation of transient precursor phases in biomineralization, the dissolution and reprecipitation as bone of CaPs are discussed. A wide variety of CaPs are presented, from the individual phases to nano-CaP, biphasic and triphasic CaP formulations, composite CaP coatings and cements, functionally graded materials (FGMs), and antibacterial CaPs. We conclude by foreseeing the future of CaPs.

Tissue Microarray Analysis Applied to Bone Diagenesis

Taphonomic processes affecting bone post mortem are important in forensic, archaeological and palaeontological investigations. In this study, the application of tissue microarray (TMA) analysis to a sample of femoral bone specimens from 20 exhumed individuals of known period of burial and age at death is described. TMA allows multiplexing of subsamples, permitting standardized comparative analysis of adjacent sections in 3-D and of representative cross-sections of a large number of specimens. Standard hematoxylin and eosin, periodic acid-Schiff and silver methenamine, and picrosirius red staining, and CD31 and CD34 immunohistochemistry were applied to TMA sections. Osteocyte and osteocyte lacuna counts, percent bone matrix loss, and fungal spheroid element counts could be measured and collagen fibre bundles observed in all specimens. Decalcification with 7% nitric acid proceeded more rapidly than with 0.5 M EDTA and may offer better preservation of histological and cellular structure. No endothelial cells could be detected using CD31 and CD34 immunohistochemistry. Correlation between osteocytes per lacuna and age at death may reflect reported age-related responses to microdamage. Methodological limitations and caveats, and results of the TMA analysis of post mortem diagenesis in bone are discussed, and implications for DNA survival and recovery considered.

Increasing Soluble Phosphate Species by Treatment of Phosphate Rocks with Acidic Waste

The development of efficient fertilizers with a diminished environmental footprint will help meet the increasing demand for food and nutrients by a growing global population. Our objective was to evaluate whether an acidic mine waste (AMW) could be used beneficially by reacting it with sparingly soluble phosphate rocks (PRs) to produce more soluble P fertilizer materials. Three PRs from Brazil and Peru were reacted with different concentrations of AMW. Changes in mineralogy and P species were determined using a combination of X-ray diffraction and phosphorus K-edge XANES spectroscopy, in addition to extractable P concentrations. Increasing the AMW concentration typically increased extractable P. X-ray diffraction data showed transformation of apatite to other species when PRs were reacted with AMW at ≥50% (v/v) in water, with gypsum or anhydrite forming at AMW concentrations as low as 12.5%. Linear combination fitting analysis of X-ray absorption near edge structure spectra also indicated a progressive transformation of apatite to noncrystalline Fe(III)-phosphate and more soluble Ca-phosphates with increasing AMW concentration. Because this AMW is costly to dispose of, reacting it with PR to produce a higher-grade phosphate fertilizer material could decrease the environmental impacts of the AMW and diminish the consumption of pure acids in conventional P fertilizer production.

Effect of nanolayering of calcium salts of phosphoric acid ester monomers on the durability of resin-dentin bonds

To investigate the contribution of nanolayering on resin-dentin bond durability, two phosphoric acid ester resin monomers, 10-methacryloyloxy-decyl-dihydrogen-phosphate (10-MDP) or its analog, methacryloyloxy-penta-propyleneglycol-dihydrogen-phosphate (MDA), were examined for their affinity for mineralized dentin powder in a column chromatography setup. Hydroxyapatite (HA) powder was dispersed in experimental primers consisting of 10-MDP or MDA solvated in ethanol/water and examined with FTIR, (31)P MAS-NMR and XPS. Light-curable 10-MDP or MDA primers were used for bonding to dentin, and examined after 24h or one-year of water-aging by TEM for evidence of nanolayering, and for microtensile bond strength evaluation. Primer-bonded dentin was examined by thin-film XRD to identify short-range order peaks characteristic of nanolayering of resin monomer-Ca salts. Although 10-MDP had better affinity for mineralized dentin than MDA, both monomers completely eluted from the mineralized dentin powder column using ethanol-water as mobile phase, indicating that the adsorption processes were reversible. This finding was supported by chemoanalytic data. XRD of 10-MDP-bonded dentin showed three diffraction peaks hat were absent from MDA-bonded dentin. Nanolayering was identified by TEM in 10-MDP-bonded dentin, but not in MDA-bonded dentin. Significant drop in bond strength (in MPa) was observed for both groups after one-year of water-aging compared with 24-h: 10-MDP group from 48.3±6.3 to 37.4±4.6; MDA group from 50.7±5.0 to 35.7±3.8 (P<0.05), with no significant difference between the two groups at the same time-point. Because both functional monomer-primed, resin-bonded dentin exhibited similar bond strength decline after water-aging, presence of nanolayering is unlikely to contribute to the overall resin-dentin bond durability.

STATEMENT OF SIGNIFICANCE

The durability of resin-dentin bonds in 10-MDP containing self-etching adhesives has been anecdotally attributed to the presence of nanolayering of 10-MDP-calcium salts in the resin-dentin interface. Results of the present work indicate that such a claim cannot be justified. Complete elution of the phosphoric acid ester monomer from mineralized dentin powder in the column chromatography experiments using ethanol-water mobile phase to simulate the solvent mixture employed in most 10-MDP-containing dentin adhesives further challenges the previously proposed adhesion-decalcification concept that utilizes chemical bonding of phosphoric acid ester monomers to apatite as a bonding mechanism in 10-MDP containing dentin adhesives.

Soluble phosphate fertilizer production using acid effluent from metallurgical industry

Preventive and effective waste management requires cleaner production strategies and technologies for recycling and reuse. Metallurgical industries produce a great amount of acid effluent that must be discarded in a responsible manner, protecting the environment. The focus of this study was to examine the use of this effluent to increase reactivity of some phosphate rocks, thus enabling soluble phosphate fertilizer production. The effluent was diluted in deionized water with the following concentrations 0; 12.5; 25; 50; 75% (v v(-1)), which were added to four natural phosphate rocks: Araxá, Patos, Bayovar and Catalão and then left to react for 1 h and 24 h. There was an increase in water (PW), neutral ammonium citrate (PNAC) and citric acid (PCA) soluble phosphorus fractions. Such increases were dependent of rock type while the reaction time had no significant effect (p < 0.05) on the chemical and mineralogical phosphate characteristics. Phosphate fertilizers with low toxic metal concentrations and a high level of micronutrients were produced compared to the original natural rocks. The minimum amount of total P2O5, PNAC and PW, required for national legislation for phosphate partially acidulated fertilizer, were met when using Catalão and the effluent at the concentration of 55% (v v(-1)). Fertilizer similar to partially acidulated phosphate was obtained when Bayovar with effluent at 37.5% (v v(-1)) was used. Even though fertilizers obtained from Araxá and Patos did not contain the minimum levels of total P2O5 required by legislation, they can be used as a nutrient source and for acid effluent recycling and reuse.

Bone-repair properties of biodegradable hydroxyapatite nano-rod superstructures

Nano-hydroxyapatite (nano-HAp) materials show an analogous chemical composition to the biogenic mineral components of calcified tissues and depending on their topography they may mimic the specific arrangement of the crystals in bone. In this work, we have evaluated the potential of four synthesized nano-HAp superstructures for the in vitro conditions of bone-repair. Experiments are underway to investigate the effects of the material microstructure, surface roughness and hydrophilicity on their osseo-integration, osteo-conduction and osteo-induction abilities. Materials were tested in the presence of both, rat primary osteoblasts and rabbit mesenchymal stem cells. The following aspects are discussed: (i) cytotoxicity and material degradation; (ii) rat osteoblast spreading, proliferation and differentiation; and (iii) rabbit mesenchymal stem cell adhesion on nano-HAp and nano-HAp/collagen type I coatings. We effectively prepared a material based on biomimetic HAp nano-rods displaying the appropriate surface topography, hydrophilicity and degradation properties to induce the in vitro desired cellular responses for bone bonding and healing. Cells seeded on the selected material readily attached, proliferated and differentiated, as confirmed by cell viability, mitochondrial metabolic activity, alkaline phosphatase (ALP) activity and cytoskeletal integrity analysis by immunofluorescence localization of alpha-smooth muscle actin (α-SMA) protein. These results highlight the influence of material's surface characteristics to determine their tissue regeneration potential and their future use in engineering osteogenic scaffolds for orthopedic implants.

Calcium orthophosphates (CaPO4): occurrence and properties

The present overview is intended to point the readers' attention to the important subject of calcium orthophosphates (CaPO4). This type of materials is of the special significance for the human beings because they represent the inorganic part of major normal (bones, teeth and antlers) and pathological (i.e., those appearing due to various diseases) calcified tissues of mammals. For example, atherosclerosis results in blood vessel blockage caused by a solid composite of cholesterol with CaPO4, while dental caries and osteoporosis mean a partial decalcification of teeth and bones, respectively, that results in replacement of a less soluble and harder biological apatite by more soluble and softer calcium hydrogenorthophosphates. Therefore, the processes of both normal and pathological calcifications are just an in vivo crystallization of CaPO4. Similarly, dental caries and osteoporosis might be considered as in vivo dissolution of CaPO4. In addition, natural CaPO4 are the major source of phosphorus, which is used to produce agricultural fertilizers, detergents and various phosphorus-containing chemicals. Thus, there is a great significance of CaPO4 for the humankind and, in this paper, an overview on the current knowledge on this subject is provided.

Calcium Orthophosphate-Containing Biocomposites and Hybrid Biomaterials for Biomedical Applications

The state-of-the-art on calcium orthophosphate (CaPO4)-containing biocomposites and hybrid biomaterials suitable for biomedical applications is presented. Since these types of biomaterials offer many significant and exciting possibilities for hard tissue regeneration, this subject belongs to a rapidly expanding area of biomedical research. Through the successful combinations of the desired properties of matrix materials with those of fillers (in such systems, CaPO4 might play either role), innovative bone graft biomaterials can be designed. Various types of CaPO4-based biocomposites and hybrid biomaterials those are either already in use or being investigated for biomedical applications are extensively discussed. Many different formulations in terms of the material constituents, fabrication technologies, structural and bioactive properties, as well as both in vitro and in vivo characteristics have been already proposed. Among the others, the nano-structurally controlled biocomposites, those containing nanodimensional compounds, biomimetically fabricated formulations with collagen, chitin and/or gelatin, as well as various functionally graded structures seem to be the most promising candidates for clinical applications. The specific advantages of using CaPO4-based biocomposites and hybrid biomaterials in the selected applications are highlighted. As the way from a laboratory to a hospital is a long one and the prospective biomedical candidates have to meet many different necessities, the critical issues and scientific challenges that require further research and development are also examined.

Self-setting calcium orthophosphate formulations

In early 1980s, researchers discovered self-setting calcium orthophosphate cements, which are bioactive and biodegradable grafting bioceramics in the form of a powder and a liquid. After mixing, both phases form pastes, which set and harden forming either a non-stoichiometric calcium deficient hydroxyapatite or brushite. Since both of them are remarkably biocompartible, bioresorbable and osteoconductive, self-setting calcium orthophosphate formulations appear to be promising bioceramics for bone grafting. Furthermore, such formulations possess excellent molding capabilities, easy manipulation and nearly perfect adaptation to the complex shapes of bone defects, followed by gradual bioresorption and new bone formation. In addition, reinforced formulations have been introduced, which might be described as calcium orthophosphate concretes. The discovery of self-setting properties opened up a new era in the medical application of calcium orthophosphates and many commercial trademarks have been introduced as a result. Currently such formulations are widely used as synthetic bone grafts, with several advantages, such as pourability and injectability. Moreover, their low-temperature setting reactions and intrinsic porosity allow loading by drugs, biomolecules and even cells for tissue engineering purposes. In this review, an insight into the self-setting calcium orthophosphate formulations, as excellent bioceramics suitable for both dental and bone grafting applications, has been provided.

Calcium Orthophosphate-Based Bioceramics

Various types of grafts have been traditionally used to restore damaged bones. In the late 1960s, a strong interest was raised in studying ceramics as potential bone grafts due to their biomechanical properties. A bit later, such synthetic biomaterials were called bioceramics. In principle, bioceramics can be prepared from diverse materials but this review is limited to calcium orthophosphate-based formulations only, which possess the specific advantages due to the chemical similarity to mammalian bones and teeth. During the past 40 years, there have been a number of important achievements in this field. Namely, after the initial development of bioceramics that was just tolerated in the physiological environment, an emphasis was shifted towards the formulations able to form direct chemical bonds with the adjacent bones. Afterwards, by the structural and compositional controls, it became possible to choose whether the calcium orthophosphate-based implants remain biologically stable once incorporated into the skeletal structure or whether they were resorbed over time. At the turn of the millennium, a new concept of regenerative bioceramics was developed and such formulations became an integrated part of the tissue engineering approach. Now calcium orthophosphate scaffolds are designed to induce bone formation and vascularization. These scaffolds are often porous and harbor different biomolecules and/or cells. Therefore, current biomedical applications of calcium orthophosphate bioceramics include bone augmentations, artificial bone grafts, maxillofacial reconstruction, spinal fusion, periodontal disease repairs and bone fillers after tumor surgery. Perspective future applications comprise drug delivery and tissue engineering purposes because calcium orthophosphates appear to be promising carriers of growth factors, bioactive peptides and various types of cells.

Calcium orthophosphates in dentistry

Dental caries, also known as tooth decay or a cavity, remains a major public health problem in the most communities even though the prevalence of disease has decreased since the introduction of fluorides for dental care. Therefore, biomaterials to fill dental defects appear to be necessary to fulfill customers' needs regarding the properties and the processing of the products. Bioceramics and glass-ceramics are widely used for these purposes, as dental inlays, onlays, veneers, crowns or bridges. Calcium orthophosphates belong to bioceramics but they have some specific advantages over other types of bioceramics due to a chemical similarity to the inorganic part of both human and mammalian bones and teeth. Therefore, calcium orthophosphates (both alone and as components of various formulations) are used in dentistry as both dental fillers and implantable scaffolds. This review provides brief information on calcium orthophosphates and describes in details current state-of-the-art on their applications in dentistry and dentistry-related fields. Among the recognized dental specialties, calcium orthophosphates are most frequently used in periodontics; however, the majority of the publications on calcium orthophosphates in dentistry are devoted to unspecified "dental" fields.