Insight into the structural, optoelectronic, and thermoelectric properties of Fe2HfSi Heusler by DFT investigation

At high pressure, the pressure dependencies of the structural, electronic, optical, and thermoelectric properties of Fe₂HfSi Heusler were calculated using the FP-LAPW method within the framework of the density functional theory. The calculations were carried out using the modified Becke-Johnson (mBJ) scheme. Our calculations showed that the Born mechanical stability criteria confirmed the mechanical stability in the cubic phase. Further, through Poisson and Pugh's ratios critical limits, the findings of the ductile strength were computed. At a pressure of 0 GPa, the indirect nature of the material may be deduced from the electronic band structures of Fe₂HfSi as well as the estimations for its density of states. Under pressure, the real and imaginary dielectric function responses, optical conductivity, absorption coefficient, energy loss function, refractive index, reflectivity, and extinction coefficient were computed in the 0-12 eV range. Using semi-classical Boltzmann theory, a thermal response is also studied. As the pressure rises, the Seebeck coefficient decreases, while the electrical conductivity rises. The figure of merit (ZT) and Seebeck coefficients were determined at temperatures of 300 K, 600 K, 900 K, and 1200 K in order to better understand the thermoelectric properties of a material at these different temperatures. Despite the fact that the ideal Seebeck coefficient for Fe₂HfSi was discovered at 300 K and was determined to be superior to that reported previously. Materials with a thermoelectric reaction has been shown to be suitable for reusing waste heat in systems. As a result, Fe₂HfSi functional material may aid in the development of new energy harvesting and optoelectronic technologies.

Controllable Wetting Transitions on Photoswitchable Physical Gels

Softness plays a key role in the deformation of soft elastic substrates at the three-phase contact line, and the acting forces lead to the formation of a wetting ridge due to elastocapillarity. The change in wetting ridge and surface profiles at different softness has a great impact on the droplet behavior in different phenomena. Commonly used materials to study soft wetting are swollen polymeric gels or polymer brushes. These materials offer no possibility to change the softness on demand. Therefore, adjustable surfaces with tunable softness are highly sought-after to achieve on-demand transition between wetting states on soft surfaces. Here, we present a photorheological physical soft gel with adjustable stiffness based on the spiropyran photoswitch that shows the formation of wetting ridges upon droplet deposition. The presented photoswitchable gels allow the creation of reversibly switchable softness patterns with microscale resolution using UV light-switching of the spiropyran molecule. Gels with varying softness are analyzed, showing a decrease in the wetting ridge height at higher gel stiffness. Furthermore, wetting ridges before and after photoswitching are visualized using confocal microscopy, showing the transition in the wetting properties from soft wetting to liquid/liquid wetting.

Vaccines against Tuberculosis: Where Are We Now?

Tuberculosis (TB) is among the top 10 leading causes of death in low-income countries. Statistically, TB kills more than 30,000 people each week and leads to more deaths than any other infectious disease, such as acquired immunodeficiency syndrome (AIDS) and malaria. TB treatment is largely dependent on BCG vaccination and impacted by the inefficacy of drugs, absence of advanced vaccines, misdiagnosis improper treatment, and social stigma. The BCG vaccine provides partial effectiveness in demographically distinct populations and the prevalence of multidrug-resistant (MDR) and extensively drug-resistant (XDR) TB incidences demands the design of novel TB vaccines. Various strategies have been employed to design vaccines against TB, such as: (a) The protein subunit vaccine; (b) The viral vector vaccine; (c) The inactivation of whole-cell vaccine, using related mycobacteria, (d) Recombinant BCG (rBCG) expressing Mycobacterium tuberculosis (M.tb) protein or some non-essential gene deleted BCG. There are, approximately, 19 vaccine candidates in different phases of clinical trials. In this article, we review the development of TB vaccines, their status and potential in the treatment of TB. Heterologous immune responses generated by advanced vaccines will contribute to long-lasting immunity and might protect us from both drug-sensitive and drug-resistant TB. Therefore, advanced vaccine candidates need to be identified and developed to boost the human immune system against TB.

Substituent Effects in Bioorthogonal Diels-Alder Reactions of 1,2,4,5-Tetrazines

1,2,4,5-Tetrazines are increasingly used as reactants in bioorthogonal chemistry due to their high reactivity in Diels-Alder reactions with various dienophiles. Substituents in the 3- and 6-positions of the tetrazine scaffold are known to have a significant impact on the rate of cycloadditions; this is commonly explained on the basis of frontier molecular orbital theory. In contrast, we show that reactivity differences between commonly used classes of tetrazines are not controlled by frontier molecular orbital interactions. In particular, we demonstrate that mono-substituted tetrazines show high reactivity due to decreased Pauli repulsion, which leads to a more asynchronous approach associated with reduced distortion energy. This follows the recent Vermeeren-Hamlin-Bickelhaupt model of reactivity increase in asymmetric Diels-Alder reactions. In addition, we reveal that ethylene is not a good model compound for other alkenes in Diels-Alder reactions.

High-resolution cryo-electron microscopy structure of block copolymer nanofibres with a crystalline core

Seeded growth of crystallizable block copolymers and π-stacking molecular amphiphiles in solution using living crystallization-driven self-assembly is an emerging route to fabricate uniform one-dimensional and two-dimensional core-shell micellar nanoparticles of controlled size with a range of potential applications. Although experimental evidence indicates that the crystalline core of these nanomaterials is highly ordered, a direct observation of their crystal lattice has not been successful. Here we report the high-resolution cryo-transmission electron microscopy studies of vitrified solutions of nanofibres made from a crystalline core of poly(ferrocenyldimethylsilane) (PFS) and a corona of polysiloxane grafted with 4-vinylpyridine groups. These studies show that poly(ferrocenyldimethylsilane) chains pack in an 8-nm-diameter core lattice with two-dimensional pseudo-hexagonal symmetry that is coated by a 27 nm 4-vinylpyridine corona with a 3.5 nm distance between each 4-vinylpyridine strand. We combine this structural information with a molecular modelling analysis to propose a detailed molecular model for solvated poly(ferrocenyldimethylsilane)-b-4-vinylpyridine nanofibres.

Ligand-enabled Ni-catalysed enantioconvergent intermolecular Alkyl-Alkyl cross-coupling between distinct Alkyl halides

α-Tertiary aliphatic amides are key elements in organic molecules, which are abundantly present in natural products, pharmaceuticals, agrochemicals, and functional organic materials. Enantioconvergent alkyl-alkyl bond-forming process is one of the most straightforward and efficient, yet highly challenging ways to build such stereogenic carbon centers. Herein, we report an enantioselective alkyl-alkyl cross-coupling between two different alkyl electrophiles to access α-tertiary aliphatic amides. With a newly-developed chiral tridentate ligand, two distinct alkyl halides were successfully cross-coupled together to forge an alkyl-alkyl bond enantioselectively under reductive conditions. Mechanistic investigations reveal that one alkyl halides exclusively undergo oxidative addition with nickel versus in-situ formation of alkyl zinc reagents from the other alkyl halides, rendering formal reductive alkyl-alkyl cross-coupling from easily available alkyl electrophiles without preformation of organometallic reagents.

Inhibitors of UHRF1 base flipping activity showing cytotoxicity against cancer cells

Ubiquitin-like containing PHD and RING finger domain 1 (UHRF1) is a nuclear multi-domain protein overexpressed in numerous human cancer types. We previously disclosed the anthraquinone derivative UM63 that inhibits UHRF1-SRA domain base-flipping activity, although having DNA intercalating properties. Herein, based on the UM63 structure, new UHRF1-SRA inhibitors were identified through a multidisciplinary approach, combining molecular modelling, biophysical assays, molecular and cell biology experiments. We identified AMSA2 and MPB7, that inhibit UHRF1-SRA mediated base flipping at low micromolar concentrations, but do not intercalate into DNA, which is a key advantage over UM63. These molecules prevent UHRF1/DNMT1 interaction at replication forks and decrease the overall DNA methylation in cells. Moreover, both compounds specifically induce cell death in numerous cancer cell lines, displaying marginal effect on non-cancer cells, as they preferentially affect cells with high level of UHRF1. Overall, these two compounds are promising leads for the development of anti-cancer drugs targeting UHRF1.

Dynamic electrostatic assembly of polyelectrolytes and perfluorosurfactants into environmentally Adaptable, freestanding membranes with ultralow surface energy and surface adhesion

HYPOTHESIS

Integration of ultralow surface energy and surface functionality on one surface coatings is highly desirable in chemical and biomedical applications. However, it is a fundamental challenge to reduce surface energy without cost of surface functionality and vice versa. To address this challenge, the present work made use of the rapid and reversible change of surface orientation conformations of weak polyelectrolyte multilayers to create ionic, perfluorinated surfaces.

EXPERIMENTS

Poly(allylamine hydrochloride) (PAH) chains and the micelles of sodium perfluorooctanoate (SPFO) were layer-by-layer (LbL) assembled into (SPFO/PAH)_n multilayer films, which readily exfoliated to freestanding membranes. The static and dynamic surface wetting behaviors of the resulting membranes were studied by sessile drop technique and their surface charge behaviors in water by electrokinetic analysis.

FINDINGS

As-prepared (SPFO/PAH)_n membranes exhibited ultralow surface energy in air; the lowest surface energy is 2.6 ± 0.5 mJ/m² for PAH-capped surfaces and 7.0 ± 0.9 mJ/m² for SPFO-capped surfaces. They readily became positively charged in water, which allowed not only effective adsorption of ionic species for further functionalization with subtle change in surface energy, but effective adhesion onto various solid substrates such as glass, stainless steel, and polytetrafluoroethylene to endorse the wide applicability of (SPFO/PAH)_n membranes.

Chemically Induced Extracellular Ice Nucleation Reduces Intracellular Ice Formation Enabling 2D and 3D Cellular Cryopreservation

3D cell assemblies such as spheroids reproduce the in vivo state more accurately than traditional 2D cell monolayers and are emerging as tools to reduce or replace animal testing. Current cryopreservation methods are not optimized for complex cell models, hence they are not easily banked and not as widely used as 2D models. Here we use soluble ice nucleating polysaccharides to nucleate extracellular ice and dramatically improve spheroid cryopreservation outcomes. This protects the cells beyond using DMSO alone, and with the major advantage that the nucleators function extracellularly and hence do not need to permeate the 3D cell models. Critical comparison of suspension, 2D and 3D cryopreservation outcomes demonstrated that warm-temperature ice nucleation reduces the formation of (fatal) intracellular ice, and in the case of 2/3D models this reduces propagation of ice between adjacent cells. This demonstrates that extracellular chemical nucleators could revolutionize the banking and deployment of advanced cell models.

Spiers Memorial Lecture: Catalytic activation of molecular nitrogen for green ammonia synthesis: introduction and current status

The efficient synthesis of ammonia using carbon-footprint-free hydrogen under mild conditions is a grand challenge in chemistry today. To achieve this objective, novel concepts are needed for the activation process and catalyst. This article briefly reviews catalytic activation of N₂ for ammonia synthesis under mild conditions. The features of the various activation methods reported so far are summarized, looking chronologically back at progress in heterogeneous catalysts since the use of iron oxide for the Haber-Bosch process, and finally the technical challenges to be overcome are described. Establishing low work functions for the support materials of the metal catalysts is one key to reducing the activation barrier to dissociate N₂. Surfaces of electride materials that preserve the character of the bulk are shown to be useful for this purpose. The requirements of desired catalysts are high efficiency at low temperatures, Ru-free compositions, and chemical robustness in the ambient atmosphere.

"Stereoelectronic Deprotection of Nitrogen": Recovering Nucleophilicity with a Conformational Change

Ureas are often thought of as "double amides" due to the obvious structural similarity of these functional groups. The main structural feature of an amide is its planarity, which is responsible for the conjugation between the nitrogen atom and carbonyl moiety and the decrease of amide nucleophilicity. Consequently, since amides are poor nucleophiles, ureas are often thought of as poor nucleophiles as well. Herein, we demonstrate that ureas can be distinctly different from amides. These differences can be amplified by rotation around one of the ureas' C-N bonds, which switches off the amide resonance and recovers the nucleophilicity of one of the nitrogen atoms. This conformational change can be further facilitated by the judicious introduction of steric bulk to disfavor the planar conformation. This change in reactivity is an example of "stereoelectronic deprotection," a concept when the desired reactivity of a functional group is produced by a conformational change rather than a chemical modification. This concept may be used complementarily to the traditional protecting groups. We also demonstrate both the viability and the utility of this concept by the synthesis of unusual 2-oxoimidazolium salts possessing quaternary nitrogen atoms at the urea moiety.

Cation-Driven Assembly of Bilayered Vanadium Oxide and Graphene Oxide Nanoflakes to Form Two-Dimensional Heterostructure Electrodes for Li-Ion Batteries

Lithium preintercalated bilayered vanadium oxide (LVO or δ-Li_xV₂O₅·nH₂O) and graphene oxide (GO) nanoflakes were assembled using a concentrated lithium chloride solution and annealed under vacuum at 200 °C to form two-dimensional (2D) δ-Li_xV₂O₅·nH₂O and reduced GO (rGO) heterostructures. We found that the Li⁺ ions from LiCl enhanced the oxide/carbon heterointerface formation and served as stabilizing ions to improve structural and electrochemical stability. The graphitic content of the heterostructure could be easily controlled by changing the initial GO concentration prior to assembly. We found that increasing the GO content in our heterostructure composition helped inhibit the electrochemical degradation of LVO during cycling and improved the rate capability of the heterostructure. A combination of scanning electron microscopy and X-ray diffraction was used to help confirm that a 2D heterointerface formed between LVO and GO, and the final phase composition was determined using energy-dispersive X-ray spectroscopy and thermogravimetric analysis. Scanning transmission electron microscopy and electron energy-loss spectroscopy were additionally used to examine the heterostructures at high resolution, mapping the orientations of rGO and LVO layers and locally imaging their interlayer spacings. Further, electrochemical cycling of the cation-assembled LVO/rGO heterostructures in Li-ion cells with a non-aqueous electrolyte revealed that increasing the rGO content led to improved cycling stability and rate performance, despite slightly decreased charge storage capacity. The heterostructures with 0, 10, 20, and 35 wt % rGO exhibited capacities of 237, 216, 174, and 150 mAh g^-1, respectively. Moreover, the LVO/rGO-35 wt % and LVO/rGO-20 wt % heterostructures retained 75% (110 mAh g^-1) and 67% (120 mAh g^-1) of their initial capacities after increasing the specific current from 20 to 200 mA g^-1, while the LVO/rGO-10 wt % sample retained only 48% (107 mAh g^-1) of its initial capacity under the same cycling conditions. In addition, the cation-assembled LVO/rGO electrodes exhibited enhanced electrochemical stability compared to electrodes prepared through physical mixing of LVO and GO nanoflakes in the same ratios as the heterostructure electrodes, further revealing the stabilizing effect of a 2D heterointerface. The cation-driven assembly approach, explored in this work using Li⁺ cations, was found to induce and stabilize the formation of stacked 2D layers of rGO and exfoliated LVO. The reported assembly methodology can be applied for a variety of systems utilizing 2D materials with complementary properties for applications as electrodes in energy storage devices.

Synthesis of a DNA-Encoded Macrocyclic Library Utilizing Intramolecular Benzimidazole Formation

Macrocycles occupy chemical space "beyond the rule of five". They bridge traditional bioactive small molecule drugs and macromolecules and have the potential to modulate challenging targets such as PPI or proteases. Here we report an on-DNA macrocyclization reaction utilizing intramolecular benzimidazole formation. A 129-million-member macrocyclic library composed of a privileged benzimidazole core, a dipeptide sequence (natural or non-natural), and linkers of varying length and flexibility was designed and synthesized.

Current Principles, Challenges, and New Metrics in pH-Responsive Drug Delivery Systems for Systemic Cancer Therapy

The paradigm of drug delivery via particulate formulations is one of the leading ideas that enable overcoming limitations of traditional chemotherapeutic agents. The trend toward more complex multifunctional drug carriers is well-traced in the literature. Nowadays, the prospectiveness of stimuli-responsive systems capable of controlled cargo release in the lesion nidus is widely accepted. Both endogenous and exogenous stimuli are employed for this purpose; however, endogenous pH is the most common trigger. Unfortunately, scientists encounter multiple challenges on the way to the implementation of this idea related to the vehicles' accumulation in off-target tissues, their immunogenicity, the complexity of drug delivery to intracellular targets, and finally, the difficulties in the fabrication of carriers matching all imposed requirements. Here, we discuss fundamental strategies for pH-responsive drug delivery, as well as limitations related to such carriers' application, and reveal the main problems, weaknesses, and reasons for poor clinical results. Moreover, we attempted to formulate the profiles of an "ideal" drug carrier in the frame of different strategies drawing on the example of metal-comprising materials and considered recently published studies through the lens of these profiles. We believe that this approach will facilitate the formulation of the main challenges facing researchers and the identification of the most promising trends in technology development.

Degradation of tartrazine by Oxone® in the presence of cobalt based catalyst supported on pillared montmorillonite - Efficient technology even in extreme conditions

The catalytic degradation of hazardous organic contaminants in industrial wastewater is a promising technology. Reactions of tartrazine, the synthetic yellow azo dye, with Oxone® in the presence of catalyst in strong acidic condition (pH 2), were detected by using UV-Vis spectroscopy. In order to extend the applicability profile of Co-supported Al-pillared montmorillonite catalyst an investigation of Oxone® induced reactions were performed in extreme acidic environment. The products of the reactions were identified by liquid chromatography-mass spectrometry (LC-MS). Along with the catalytic decomposition of tartrazine induced by radical attack (confirmed as unique reaction path under neutral and alkaline conditions), the formation of tartrazine derivatives by reaction of nucleophilic addition was also detected. The presence of derivatives under acidic conditions slowed down the hydrolysis of tartrazine diazo bond in comparison to the reactions in neutral environment. Nevertheless, the reaction in acidic conditions (pH 2) is faster than the one conducted in alkaline conditions (pH 11). Theoretical calculations were used to complete and clarify the mechanisms of tartrazine derivatization and degradation, as well as to predict the UV-Vis spectra of compounds which could serve as predictors of certain reaction phases. ECOSAR program, used to estimate toxicological profile of compounds to aquatic animals, indicated an increase in the harmfulness of the compounds identified by LC-MS as degradation products from the reaction conducted for 240min. It could be concluded that an intensification of the process parameters (higher concentration of Oxone®, higher catalyst loading, increased reaction time, etc.) is needed in order to obtain only biodegradable products.

Advances in Solution-Processed Blue Quantum Dot Light-Emitting Diodes

Quantum dot light-emitting diodes (QLEDs) have been identified as a next-generation display technology owing to their low-cost manufacturing, wide color gamut, and electrically driven self-emission properties. However, the efficiency and stability of blue QLEDs still pose a significant challenge, limiting their production and potential application. This review aims to analyse the factors leading to the failure of blue QLEDs and presents a roadmap to accelerate their development based on the progress made in the synthesis of II-VI (CdSe, ZnSe) quantum dots (QDs), III-V (InP) QDs, carbon dots, and perovskite QDs. The proposed analysis will include discussions on material synthesis, core-shell structures, ligand interactions, and device fabrication, providing a comprehensive overview of these materials and their development.

Anion-Induced Interfacial Liquid Layers on LiCoO2 in Salt-in-Water Lithium-Ion Batteries

The incompatibility of lithium intercalation electrodes with water has impeded the development of aqueous Li-ion batteries. The key challenge is protons which are generated by water dissociation and deform the electrode structures through intercalation. Distinct from previous approaches utilizing large amounts of electrolyte salts or artificial solid-protective films, we developed liquid-phase protective layers on LiCoO₂ (LCO) using a moderate concentration of 0.5∼3 mol kg^-1 lithium sulfate. Sulfate ion strengthened the hydrogen-bond network and easily formed ion pairs with Li⁺, showing strong kosmotropic and hard base characteristics. Our quantum mechanics/molecular mechanics (QM/MM) simulations revealed that sulfate ion paired with Li⁺ helped stabilize the LCO surface and reduced the density of free water in the interface region below the point of zero charge (PZC) potential. In addition, in situ electrochemical surface-enhanced infrared absorption spectroscopy (SEIRAS) proved the appearance of inner-sphere sulfate complexes above the PZC potential, serving as the protective layers of LCO. The role of anions in stabilizing LCO was correlated with kosmotropic strength (sulfate > nitrate > perchlorate > bistriflimide (TFSI^-)) and explained better galvanostatic cyclability in LCO cells.

Improvement of Cellulomonas fimi endoglucanase CenA by multienzymatic display on a decameric structural scaffold

The development of multifunctional particles using polymeric scaffolds is an emerging technology for many nanobiotechnological applications. Here we present a system for the production of multifunctional complexes, based on the high affinity non-covalent interaction of cohesin and dockerin modules complementary fused to decameric Brucella abortus lumazine synthase (BLS) subunits, and selected target proteins, respectively. The cohesin-BLS scaffold was solubly expressed in high yield in Escherichia coli, and revealed a high thermostability. The production of multienzymatic particles using this system was evaluated using the catalytic domain of Cellulomonas fimi endoglucanase CenA recombinantly fused to a dockerin module. Coupling of the enzyme to the scaffold was highly efficient and occurred with the expected stoichiometry. The decavalent enzymatic complexes obtained showed higher cellulolytic activity and association to the substrate compared to equivalent amounts of the free enzyme. This phenomenon was dependent on the multiplicity and proximity of the enzymes coupled to the scaffold, and was attributed to an avidity effect in the polyvalent enzyme interaction with the substrate. Our results highlight the usefulness of the scaffold presented in this work for the development of multifunctional particles, and the improvement of lignocellulose degradation among other applications. KEY POINTS: • New system for multifunctional particle production using the BLS scaffold • Higher cellulolytic activity of polyvalent endoglucanase compared to the free enzyme • Amount of enzyme associated to cellulose is higher for the polyvalent endoglucanase.

Enhanced performance of nanocomposite membrane developed on sulfonated poly (1, 4-phenylene ether-ether-sulfone) with zeolite imidazole frameworks for fuel cell application

Proton exchange membrane fuel cells (PEMFC) have received a lot of interest and use metal-organic frameworks (MOF)/polymer nanocomposite membranes. Zeolite imidazole framework-90 (ZIF-90) was employed as an addition in the sulfonated poly (1, 4-phenylene ether-ether-sulfone) (SPEES) matrix in order to investigate the proton conductivity in a novel nanocomposite membrane made of SPEES/ ZIF. The high porosity, free surface, and presence of the aldehyde group in the ZIF-90 nanostructure have a substantial impact on enhancing the mechanical, chemical, thermal, and proton conductivity capabilities of the SPEES/ZIF-90 nanocomposite membranes. The results indicate that the utilization of SPEES/ZIF-90 nanocomposite membranes with 3wt% ZIF-90 resulted in enhanced proton conductivity of up to 160 mS/cm at 90 °C and 98% relative humidity (RH). This is a significant improvement compared to the SPEES membrane which exhibited a proton conductivity of 55 mS/cm under the same conditions, indicating a 1.9-fold increase in performance. Furthermore, the SPEES/ZIF-90/3 membrane exhibited a remarkable 79% improvement in maximum power density, achieving a value of 0.52 W/cm² at 0.5 V and 98% RH, which is 79% higher than that of the pristine SPEES membrane.

Potential Binding Sites of Pharmacological Chaperone NCGC00241607 on Mutant β-Glucocerebrosidase and Its Efficacy on Patient-Derived Cell Cultures in Gaucher and Parkinson's Disease

Mutations in the GBA1 gene, encoding the lysosomal enzyme glucocerebrosidase (GCase), cause Gaucher disease (GD) and are the most common genetic risk factor for Parkinson's disease (PD). Pharmacological chaperones (PCs) are being developed as an alternative treatment approach for GD and PD. To date, NCGC00241607 (NCGC607) is one of the most promising PCs. Using molecular docking and molecular dynamics simulation we identified and characterized six allosteric binding sites on the GCase surface suitable for PCs. Two sites were energetically more preferable for NCGC607 and located nearby to the active site of the enzyme. We evaluated the effects of NCGC607 treatment on GCase activity and protein levels, glycolipids concentration in cultured macrophages from GD (n = 9) and GBA-PD (n = 5) patients as well as in induced human pluripotent stem cells (iPSC)-derived dopaminergic (DA) neurons from GBA-PD patient. The results showed that NCGC607 treatment increased GCase activity (by 1.3-fold) and protein levels (by 1.5-fold), decreased glycolipids concentration (by 4.0-fold) in cultured macrophages derived from GD patients and also enhanced GCase activity (by 1.5-fold) in cultured macrophages derived from GBA-PD patients with N370S mutation (p < 0.05). In iPSC-derived DA neurons from GBA-PD patients with N370S mutation NCGC607 treatment increased GCase activity and protein levels by 1.1-fold and 1.7-fold (p < 0.05). Thus, our results showed that NCGC607 could bind to allosteric sites on the GCase surface and confirmed its efficacy on cultured macrophages from GD and GBA-PD patients as well as on iPSC-derived DA neurons from GBA-PD patients.

Manganese-Based Antioxidase-Inspired Biocatalysts with Axial Mn-N5 Sites and 2D d-π-Conjugated Networks for Rescuing Stem Cell Fate

Constructing highly effective biocatalysts with controllable coordination geometry for eliminating reactive oxygen species (ROS) to address the current bottlenecks in stem-cell-based therapeutics remains challenging. Herein, inspired by the coordination structure of manganese-based antioxidase, we report a manganese-coordinated polyphthalocyanine-based biocatalyst (Mn-PcBC) with axial Mn-N5 sites and 2D d-π-conjugated networks that serves as an artificial antioxidase to rescue stem cell fate. Owing to the unique chemical and electronic structures, Mn-PcBC displays efficient, multifaceted, and robust ROS-scavenging activities, including elimination of H2 O2 and O2 ⋅- . Consequently, Mn-PcBC efficiently rescues the bioactivity and functionality of stem cells in high-ROS-level microenvironments by protecting the transcription of osteogenesis-related genes. This study offers essential insight into the crucial functions of axially coordinated Mn-N5 sites in ROS scavenging and suggests new strategies to create efficient artificial antioxidases for stem-cell therapies.

Near-Infrared Spectroscopy and Machine Learning for Accurate Dating of Historical Books

Non-destructive, fast, and accurate methods of dating are highly desirable for many heritage objects. Here, we present and critically evaluate the use of near-infrared (NIR) spectroscopic data combined with three supervised machine learning methods to predict the publication year of paper books dated between 1851 and 2000. These methods provide different accuracies; however, we demonstrate that the underlying processes refer to common spectral features. Regardless of the machine learning method used, the most informative wavelength ranges can be associated with C-H and O-H stretching first overtone, typical of the cellulose structure, and N-H stretching first overtone from amide/protein structures. We find that the expected influence of degradation on the accuracy of prediction is not meaningful. The variance-bias decomposition of the reducible error reveals some differences among the three machine learning methods. Our results show that two out of the three methods allow predictions of publication dates in the period 1851-2000 from NIR spectroscopic data with an unprecedented accuracy of up to 2 years, better than any other non-destructive method applied to a real heritage collection.

Ene Reductase Enabled Intramolecular β-C-H Functionalization of Substituted Cyclohexanones for Efficient Synthesis of Bridged Bicyclic Nitrogen Scaffolds

Herein we report that ene reductases (EREDs) can facilitate an unprecedented intramolecular β-C-H functionalization reaction for the synthesis of bridged bicyclic nitrogen heterocycles containing the 6-azabicyclo[3.2.1]octane scaffold. To streamline the synthesis of these privileged motifs, we developed a gram-scale one-pot chemoenzymatic cascade by combining iridium photocatalysis with EREDs, using readily available N-phenylglycines and cyclohexenones that can be obtained from biomass. Further derivatization using enzymatic or chemical methods can convert 6-azabicyclo[3.2.1]octan-3-one into 6-azabicyclo[3.2.1]octan-3α-ols, which can be potentially utilized for the synthesis of azaprophen and its analogues for drug discovery. Mechanistic studies revealed the reaction requires oxygen, presumably to produce oxidized flavin, which can selectively dehydrogenate the 3-substituted cyclohexanone derivatives to form the α,β-unsaturated ketone, which subsequently undergoes spontaneous intramolecular aza-Michael addition under basic conditions.

Locating, tracing and sequencing multiple expanded genetic letters in complex DNA context via a bridge-base approach

A panel of unnatural base pairs is developed to expand genetic alphabets. One or more unnatural base pairs (UBPs) can be inserted to enlarge the capacity, diversity, and functionality of canonical DNA, so monitoring the multiple-UBPs-containing DNA by simple and convenient approaches is essential. Herein, we report a bridge-base approach to repurpose the capability of determining TPT3-NaM UBPs. The success of this approach depends on the design of isoTAT that can simultaneously pair with NaM and G as a bridge base, as well as the discovering of the transformation of NaM to A in absence of its complementary base. TPT3-NaM can be transferred to C-G or A-T by simple PCR assays with high read-through ratios and low sequence-dependent properties, permitting for the first time to dually locate the multiple sites of TPT3-NaM pairs. Then we show the unprecedented capacity of this approach to trace accurate changes and retention ratios of multiple TPT3-NaM UPBs during in vivo replications. In addition, the method can also be applied to identify multiple-site DNA lesions, transferring TPT3-NaM makers to different natural bases. Taken together, our work presents the first general and convenient approach capable of locating, tracing, and sequencing site- and number-unlimited TPT3-NaM pairs.

Heterogeneity of the vanadia phase dispersed on titania. Co-existence of distinct mono-oxo VOx sites

The structural and configurational characteristics of the species comprising the (VO_x)_n phase dispersed on TiO₂(P25) are studied under oxidative dehydration conditions by in situ molecular vibrational spectroscopy (Raman, FTIR) complemented by in situ Raman/¹⁸O isotope exchange and Raman spectroscopy under static equilibrium at temperatures of 175-430 °C and coverages in the 0.40-5.5 V nm^-2 range. It is found that the dispersed (VO_x)_n phase consists of distinct species with different configurations. At low coverages of 0.40 and 0.74 V nm^-2, isolated (monomeric) species prevail. Two distinct mono-oxo species are found: (i) a majority Species-I, presumably of distorted tetrahedral OV(-O-)₃ configuration with VO mode at 1022-1024 cm^-1 and (ii) a minority Species-II, presumably of distorted octahedral-like OV(-O-)₄ configuration with VO mode at 1013-1014 cm^-1. Cycling the catalysts in the 430 → 250 → 175 → 430 °C sequence results in temperature-dependent structural transformations. With decreasing temperature, a Species-II → Species-I transformation with concomitant surface hydroxylation takes place by means of a hydrolysis mechanism mediated by water molecules retained by the surface. A third species (Species-III, presumably of di-oxo configuration with ν_s/ν_as at ∼995/985 cm^-1) occurs in minority and its presence is increased when further lowering the temperature according to a Species-I → Species-III hydrolysis step. Species-II (OV(-O-)₄) shows the highest reactivity to water. For coverages above 1 V nm^-2, an association of VO_x units takes place leading to gradually larger polymeric domains when the coverage is increased in the 1.1-5.5 V nm^-2 range. Polymeric (VO_x)_n domains comprise building units that maintain the structural characteristics (termination configuration and V coordination number) of Species-I, Species-II, and Species-III. The terminal VO stretching modes are blue-shifted with increasing (VO_x)_n domain size. A lower extent of hydroxylation is evidenced under static equilibrium forced dehydrated conditions, thereby limiting the temperature dependent structural transformations and excluding the possibility of incoming water vapors as the cause for the temperature dependent effects observed in the in situ Raman/FTIR spectra. The results address open issues and offer new insight in the structural studies of VO_x/TiO₂ catalysts.

Heating-free synthesis of red emissive carbon dots through separated processes of polymerization and carbonization

Polymerization and carbonization are believed as two basic processes for the bottom-up synthesis of carbon dots (CDs). Since these two processes usually occur simultaneously due to the high reaction temperature and fast reaction rate, it is still a challenge to separate and control these two processes. In the present work, we reported a new room temperature method, which achieved the separated and controlled polymerization and carbonization processes. The polymerization process is realized by dissolving o-phenylenediamine (OPD) in ethanol at room temperature, and finally obtained polymer dots (PDs) without any lattice with a sphere size of 29.6 nm. The carbonization process begins in a manual way by adding concentrated sulfuric acid. After carbonization, CDs (noted as CPDs in this work) with a size of 3.6 nm and a clear lattice can be obtained. Importantly, the separated polymerization and carbonization make us possible to adjust the composition or interactions of intermediate products during the synthesis process. As a prototype, we added acetic acid (AA) additives into OPD precursors during the polymerization stage. Due to the crosslink enhanced emission (CEE) effect via hydrogen bonds which are produced by the amide groups from AA reaction products with H in the -NH₃⁺ or aromatic ring, the resulted CPDs show improved PLQY from an initial 6.87% (without AA) to 16.47%. The current work realized the separated and controllable polymerization and carbonization processes, opening up the door for tuning the composition and interactions of intermediate products before carbonization.

Synthesis and Applications of Bicyclo[1.1.0]butyl and Azabicyclo[1.1.0]butyl Organometallics

The use of metalated (aza)bicyclo[1.1.0]butanes in synthesis is currently experiencing a renaissance, as evidenced by the numerous reports in the last 5 years that have relied on such intermediates to undergo unique transformations or generate novel fragments. Since their discovery, these species have been demonstrated to participate in a wide range of reactions with carbon and heteroatom electrophiles, as well as metal complexes, to facilitate the rapid diversification of (aza)bicyclo[1.1.0]butane-containing compounds. Key to this is the relative acidity of the bridgehead C-H bonds which promotes facile deprotonation and subsequent functionalization of an unsubstituted position on the carbon framework via the intermediacy of a metalated (aza)bicyclo[1.1.0]butane. Additionally, the late-stage incorporation of deuterium atoms in strained fragments has led to the elucidation of numerous reaction mechanisms that involve strained bicycles. The continued investigation into the inimitable reactivity of metalated bicycles will cement their importance within the field of organometallic chemistry.

The role of peptides in reversing chemoresistance of breast cancer: current facts and future prospects

Breast cancer is the first malignant tumor in women, and its incidence is also increasing year by year. Chemotherapy is one of the standard therapies for breast cancer, but the resistance of breast cancer cells to chemotherapy drugs is a huge challenge for the effective treatment of breast cancer. At present, in the study of reversing the drug resistance of solid tumors such as breast cancer, peptides have the advantages of high selectivity, high tissue penetration, and good biocompatibility. Some of the peptides that have been studied can overcome the resistance of tumor cells to chemotherapeutic drugs in the experiment, and effectively control the growth and metastasis of breast cancer cells. Here, we describe the mechanism of different peptides in reversing breast cancer resistance, including promoting cancer cell apoptosis; promoting non-apoptotic regulatory cell death of cancer cells; inhibiting the DNA repair mechanism of cancer cells; improving the tumor microenvironment; inhibiting drug efflux mechanism; and enhancing drug uptake. This review focuses on the different mechanisms of peptides in reversing breast cancer drug resistance, and these peptides are also expected to create clinical breakthroughs in promoting the therapeutic effect of chemotherapy drugs in breast cancer patients and improving the survival rate of patients.

Probing the atomically diffuse interfaces in Pd@Pt core-shell nanoparticles in three dimensions

Deciphering the three-dimensional atomic structure of solid-solid interfaces in core-shell nanomaterials is the key to understand their catalytical, optical and electronic properties. Here, we probe the three-dimensional atomic structures of palladium-platinum core-shell nanoparticles at the single-atom level using atomic resolution electron tomography. We quantify the rich structural variety of core-shell nanoparticles with heteroepitaxy in 3D at atomic resolution. Instead of forming an atomically-sharp boundary, the core-shell interface is found to be atomically diffuse with an average thickness of 4.2 Å, irrespective of the particle's morphology or crystallographic texture. The high concentration of Pd in the diffusive interface is highly related to the free Pd atoms dissolved from the Pd seeds, which is confirmed by atomic images of Pd and Pt single atoms and sub-nanometer clusters using cryogenic electron microscopy. These results advance our understanding of core-shell structures at the fundamental level, providing potential strategies into precise nanomaterial manipulation and chemical property regulation.

The Role of Receptor Uniformity in Multivalent Binding

Multivalency is prevalent in various biological systems and applications due to the superselectivity that arises from the cooperativity of multivalent binding. Traditionally, it was thought that weaker individual binding would improve the selectivity in multivalent targeting. Here, using analytical mean field theory and Monte Carlo simulations, we discover that, for receptors that are highly uniformly distributed, the highest selectivity occurs at an intermediate binding energy and can be significantly greater than the weak binding limit. This is caused by an exponential relationship between the bound fraction and receptor concentration, which is influenced by both the strength and combinatorial entropy of binding. Our findings not only provide new guidelines for the rational design of biosensors using multivalent nanoparticles but also introduce a new perspective in understanding biological processes involving multivalency.

Superhydrophobic cotton fabrics for effective removal of high-density polyethylene and polypropylene microplastics: Insights from surface and colloidal analysis

HYPOTHESIS

The use of superhydrophobic materials to remove particulate pollutants such as microplastics is still in its infancy. In a previous study, we investigated the effectiveness of three different types of superhydrophobic materials - coatings, powdered materials, and meshes - for removing microplastics. In this study, we will explain the removal process by considering microplastics as colloids and taking into account their wetting properties as well as those of a superhydrophobic surface. The process will be explained through the interactions of electrostatic forces, van der Waals forces, and the DLVO theory.

EXPERIMENTS

In order to replicate and verify the previous experimental findings on the removal of microplastics using superhydrophobic surfaces, we have modified non-woven cotton fabrics with polydimethylsiloxane. We then proceeded to remove high-density polyethylene and polypropylene microplastics from water by introducing oil at the microplastics-water interface, and we determined the removal efficiency of the modified cotton fabrics.

FINDINGS

After achieving a superhydrophobic non-woven cotton fabric (159 ± 1°), we confirmed its effectiveness in removing high-density polyethylene and polypropylene microplastics from water with a removal efficiency of 99%. Our findings suggest that the binding energy of microplastics increases and the Hamaker constant becomes positive when they are present in oil instead of water, leading to their aggregation. As a result, electrostatic interactions become negligible in the organic phase, and van der Waals interactions become more important. The use of the DLVO theory allowed us to confirm that solid pollutants can be easily removed from the oil using superhydrophobic materials.

Streptomyces telluris sp. nov., a promising terrestrial actinobacterium with antioxidative potentials

An actinomycete strain, AA8^T, which produced a long straight chain of spores (verticillati type), was isolated from the rhizosphere soil of Mangifera indica in Bangkok, Thailand. A polyphasic taxonomic study was carried out to establish the taxonomic position of the strain. Strain AA8^T formed a tight taxonomic position in the 16S rRNA gene tree with Streptomyces roseifaciens MBT76^T. In contrast, the genome-based taxonomic analysis showed that strain AA8^T shared low average nucleotide identity-BLAST (94.1%), the digital DNA-DNA hybridization (58.2%), and the average amino acid identity (93.6%) values with S. roseifaciens MBT76^T. Moreover, a combination of physiological and biochemical properties indicated that strain AA8^T was distinguished from all Streptomyces species with effectively published names. Strain AA8^T, therefore, represents a novel species of Streptomyces, and the name Streptomyces telluris is proposed for the strain. The type strain is AA8^T (= TBRC 8483^T = NBRC 113461^T). The chemical investigation led to the isolation of nine known compounds (compounds 1-9). Among these compounds, compound 7 (3,4-dihydroxybenzaldehyde) possesses strong antioxidant activity equal to ascorbic acid, a powerful antioxidative agent.

Globular Proteins and Where to Find Them within a Polymer Brush-A Case Study

Protein adsorption by polymerized surfaces is an interdisciplinary topic that has been approached in many ways, leading to a plethora of theoretical, numerical and experimental insight. There is a wide variety of models trying to accurately capture the essence of adsorption and its effect on the conformations of proteins and polymers. However, atomistic simulations are case-specific and computationally demanding. Here, we explore universal aspects of the dynamics of protein adsorption through a coarse-grained (CG) model, that allows us to explore the effects of various design parameters. To this end, we adopt the hydrophobic-polar (HP) model for proteins, place them uniformly at the upper bound of a CG polymer brush whose multibead-spring chains are tethered to a solid implicit wall. We find that the most crucial factor affecting the adsorption efficiency appears to be the polymer grafting density, while the size of the protein and its hydrophobicity ratio come also into play. We discuss the roles of ligands and attractive tethering surfaces to the primary adsorption as well as secondary and ternary adsorption in the presence of attractive (towards the hydrophilic part of the protein) beads along varying spots of the backbone of the polymer chains. The percentage and rate of adsorption, density profiles and the shapes of the proteins, alongside with the respective potential of mean force are recorded to compare the various scenarios during protein adsorption.

Urea-based magnetic porous organic frameworks as novel adsorbent for the enrichment of phenylurea herbicides in foods

A novel urea-based magnetic porous organic frameworks Fe₃O₄@UPOFs (ETTA-PPDI) was synthesized by a simple polymerization reaction under mild conditions. The adsorbent displayed desirable adsorption performance for phenylurea herbicides (PUHs) with optimized adsorption time of only 4 min. The adsorption capacities of the adsorbent for PUHs ranged from 47.30 to 111.93 mg g^-1. A magnetic solid-phase extraction based on Fe₃O₄@UPOFs combined with high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) was established for the efficient determination of six PUHs in food samples (wheat, edible oil and cucumber), with determination coefficient (R²) ≥ 0.9972. The LODs of the method were in the range of 0.003-0.07 μg kg^-1 and recoveries ranged from 82.00 to 112.53%. The relative standard deviations were lower than 6.7%. The newly prepared adsorbent displayed great application prospects for the efficient enrichment of trace phenylurea herbicides in complex food matrices.

Photochromic Single-Component Organic Fulgide Ferroelectric with Photo-Triggered Polarization Response

Organic photochromic compounds have been widely investigated for optical memory storage and switches. Very recently, we pioneeringly discovered optical control of ferroelectric polarization switching in organic photochromic salicylaldehyde Schiff base and diarylethene derivatives, differently from the traditional ferroelectrics. However, the study of such intriguing photo-triggered ferroelectrics is still in its infancy and relatively scarce. In this manuscript, we synthesized a pair of new organic single-component fulgide isomers, (E and Z)-3-(1-(4-(tert-butyl)phenyl)ethylidene)-4-(propan-2-ylidene)dihydrofuran-2,5-dione (1E and 1Z). They undergo prominent photochromism from yellow to red. Interestingly, only polar 1E has been proven to be ferroelectric, while the centrosymmetric 1Z does not meet the basic requirement for ferroelectricity. Besides, experimental evidence shows that the Z-form can be converted to the E-form by light irradiation. More importantly, the ferroelectric domains of 1E can be manipulated by light in the absence of an electric field, benefiting from the remarkable photoisomerization. 1E also adopts good fatigue resistance to the photocyclization reaction. As far as we know, this is the first example of organic fulgide ferroelectric reported with photo-triggered ferroelectric polarization response. This work has developed a new system for studying photo-triggered ferroelectrics and would also provide an expected perspective on developing ferroelectrics for optical applications in trap future.

Heterogeneously Catalyzed Selective Acceptorless Dehydrogenative Aromatization to Primary Anilines from Ammonia via Concerted Catalysis and Adsorption Control

Although catalytic dehydrogenative aromatization from cyclohexanones and NH₃ is an attractive synthetic method for primary anilines, using a hydrogen acceptor was indispensable to achieve satisfactory levels of selectivity in liquid-phase organic synthetic systems without photoirradiation. In this study, we developed a highly selective synthesis of primary anilines from cyclohexanones and NH₃ via efficient acceptorless dehydrogenative aromatization heterogeneously catalyzed by an Mg(OH)₂-supported Pd nanoparticle catalyst in which Mg(OH)₂ species are also deposited on the Pd surface. The basic sites of the Mg(OH)₂ support effectively accelerate the acceptorless dehydrogenative aromatization via concerted catalysis, suppressing the formation of secondary amine byproducts. In addition, the deposition of Mg(OH)₂ species inhibits the adsorption of cyclohexanones on the Pd nanoparticles to suppress phenol formation, achieving the desired primary anilines with high selectivity.

Exploring the Biologically Active Metabolites Produced by Bacillus cereus for Plant Growth Promotion, Heat Stress Tolerance, and Resistance to Bacterial Soft Rot in Arabidopsis

Eight gene clusters responsible for synthesizing bioactive metabolites associated with plant growth promotion were identified in the Bacillus cereus strain D1 (BcD1) genome using the de novo whole-genome assembly method. The two largest gene clusters were responsible for synthesizing volatile organic compounds (VOCs) and encoding extracellular serine proteases. The treatment with BcD1 resulted in an increase in leaf chlorophyll content, plant size, and fresh weight in Arabidopsis seedlings. The BcD1-treated seedlings also accumulated higher levels of lignin and secondary metabolites including glucosinolates, triterpenoids, flavonoids, and phenolic compounds. Antioxidant enzyme activity and DPPH radical scavenging activity were also found to be higher in the treated seedlings as compared with the control. Seedlings pretreated with BcD1 exhibited increased tolerance to heat stress and reduced disease incidence of bacterial soft rot. RNA-seq analysis showed that BcD1 treatment activated Arabidopsis genes for diverse metabolite synthesis, including lignin and glucosinolates, and pathogenesis-related proteins such as serine protease inhibitors and defensin/PDF family proteins. The genes responsible for synthesizing indole acetic acid (IAA), abscisic acid (ABA), and jasmonic acid (JA) were expressed at higher levels, along with WRKY transcription factors involved in stress regulation and MYB54 for secondary cell wall synthesis. This study found that BcD1, a rhizobacterium producing VOCs and serine proteases, is capable of triggering the synthesis of diverse secondary metabolites and antioxidant enzymes in plants as a defense strategy against heat stress and pathogen attack.

Densified graphene-like carbon nanosheets with enriched heteroatoms enabling superior gravimetric and volumetric potassium storage capacities

Constructing carbon electrodes with abundant heteroatoms and appropriate graphitic interlayer spacing remains a major challenge for achieving high gravimetric and volumetric potassium storage capacities with fast kinetics. Herein, we constructed 3D graphene-like N, F dual-doped carbon sheets induced by Ni template (N, F-CNS-Ni) with dense structure and rich active sites, providing a promising approach to address the facing obstacles. Highly reversible K-ion insertion/extraction is realized in the graphitic carbon structure, and K-adsorption capability is enhanced by introducing N/F heteroatoms. As a result, the N, F-CNS-Ni electrode exhibits ultrahigh gravimetric and volumetric capacities of 404.5 mA h g^-1 and 281.3 mA h cm^-3 at 0.05 A/g, respectively, and a superb capacity of 259.3 mA h g^-1 with a capacity retention ratio of 90 % even after 600 cycles at 5 A/g. This work presents a simple Ni-based template method to prepare graphene-like carbon nanosheets with high packing density and rich heteroatoms, and offers mechanism insight for achieving superior K-ion storage.

Nitrogen Fixation and Hydrogen Evolution by Sterically Encumbered Mo-Nitrogenase

The substrate-reducing proteins of all nitrogenases (MoFe, VFe, and FeFe) are organized as α₂ß₂(γ₂) multimers with two functional halves. While their dimeric organization could afford improved structural stability of nitrogenases in vivo, previous research has proposed both negative and positive cooperativity contributions with respect to enzymatic activity. Here, a 1.4 kDa peptide was covalently introduced in the proximity of the P cluster, corresponding to the Fe protein docking position. The Strep-tag carried by the added peptide simultaneously sterically inhibits electron delivery to the MoFe protein and allows the isolation of partially inhibited MoFe proteins (where the half-inhibited MoFe protein was targeted). We confirm that the partially functional MoFe protein retains its ability to reduce N₂ to NH₃, with no significant difference in selectivity over obligatory/parasitic H₂ formation. Our experiment concludes that wild-type nitrogenase exhibits negative cooperativity during the steady state regarding H₂ and NH₃ formation (under Ar or N₂), with one-half of the MoFe protein inhibiting turnover in the second half. This emphasizes the presence and importance of long-range (>95 Å) protein-protein communication in biological N₂ fixation in Azotobacter vinelandii.

Ligand impact on reactive oxygen species generation of Au10 and Au25 nanoclusters upon one- and two-photon excitation

In photodynamic therapy (PDT), light-sensitive photosensitizers produce reactive oxygen species (ROS) after irradiation in the presence of oxygen. Atomically-precise thiolate-protected gold nanoclusters are molecule-like nanostructures with discrete energy levels presenting long lifetimes, surface biofunctionality, and strong near-infrared excitation ideal for ROS generation in PDT. We directly compare thiolate-gold macromolecular complexes (Au₁₀) and atomically-precise gold nanoclusters (Au₂₅), and investigate the influence of ligands on their photoexcitation. With the ability of atomically-precise nanochemistry, we produce Au₁₀SG₁₀, Au₁₀AcCys₁₀, Au₂₅SG₁₈, and Au₂₅AcCys₁₈ (SG: glutathione; AcCys: N-acetyl-cysteine) fully characterized by high-resolution mass spectrometry. Our theoretical investigation reveals key factors (energetics of excited states and structural influence of surface ligands) and their relative importance in singlet oxygen formation upon one- and two-photon excitation. Finally, we explore ROS generation by gold nanoclusters in living cells with one- and two-photon excitation. Our study presents in-depth analyses of events within gold nanoclusters when photo-excited both in the linear and nonlinear optical regimes, and possible biological consequences in cells.

Aptamer-Based Point-of-Care Devices: Emerging Technologies and Integration of Computational Methods

Recent innovations in point-of-care (POC) diagnostic technologies have paved a critical road for the improved application of biomedicine through the deployment of accurate and affordable programs into resource-scarce settings. The utilization of antibodies as a bio-recognition element in POC devices is currently limited due to obstacles associated with cost and production, impeding its widespread adoption. One promising alternative, on the other hand, is aptamer integration, i.e., short sequences of single-stranded DNA and RNA structures. The advantageous properties of these molecules are as follows: small molecular size, amenability to chemical modification, low- or nonimmunogenic characteristics, and their reproducibility within a short generation time. The utilization of these aforementioned features is critical in developing sensitive and portable POC systems. Furthermore, the deficiencies related to past experimental efforts to improve biosensor schematics, including the design of biorecognition elements, can be tackled with the integration of computational tools. These complementary tools enable the prediction of the reliability and functionality of the molecular structure of aptamers. In this review, we have overviewed the usage of aptamers in the development of novel and portable POC devices, in addition to highlighting the insights that simulations and other computational methods can provide into the use of aptamer modeling for POC integration.

Direct conversion of lignin to functionalized diaryl ethers via oxidative cross-coupling

Efficient valorization of lignin, a sustainable source of functionalized aromatic products, would reduce dependence on fossil-derived feedstocks. Oxidative depolymerization is frequently applied to lignin to generate phenolic monomers. However, due to the instability of phenolic intermediates, repolymerization and dearylation reactions lead to low selectivity and product yields. Here, a highly efficient strategy to extract the aromatic monomers from lignin affording functionalized diaryl ethers using oxidative cross-coupling reactions is described, which overcomes the limitations of oxidative methods and affords high-value specialty chemicals. Reaction of phenylboronic acids with lignin converts the reactive phenolic intermediates into stable diaryl ether products in near-theoretical maximum yields (92% for beech lignin and 95% for poplar lignin based on the content of β-O-4 linkages). This strategy suppresses side reactions typically encountered in oxidative depolymerization reactions of lignin and provides a new approach for the direct transformation of lignin into valuable functionalized diaryl ethers, including key intermediates in pharmaceutical and natural product synthesis.

Frustrated Lewis Pairs: Bonding, Reactivity, and Applications

The outstanding capability of Frustrated Lewis Pair (FLP) catalysts to activate small molecules has gained significant attention in recent times. Reactivity of FLP is further extended toward the hydrogenation of various unsaturated species. Over the past decade, this unique catalysis concept has been successfully expanded to heterogeneous catalysis as well. The present review article gives a brief survey on several studies on this field. A thorough discussion on quantum chemical studies concerning the activation of H₂ is provided. The role of aromaticity and boron-ligand cooperation on the reactivity of FLP is discussed in the Review. How FLP can activate other small molecules by cooperative action of its Lewis centers is also discussed. Further, the discussion is shifted to the hydrogenation of various unsaturated species and the mechanism regarding this process. It also discusses the latest theoretical advancements in the application of FLP in heterogeneous catalysis across various domains, such as two-dimensional materials, functionalized surfaces, and metal oxides. A deeper understanding of the catalytic process may assist in devising new heterogeneous FLP catalysts through experimental design.

A plasma-assisted approach to enhance density of accessible FeN4 sites for proton exchange membrane fuel cells

Enhancing the density and utilization of FeN₄ sites can serve as a viable approach to enhance the catalytic efficacy of iron nitrogen carbon (FeNC) catalysts for oxygen reduction reaction (ORR). Herein, we present a plasma-assisted method for enhancing the porosity of nitrogen-doped carbon. Our findings indicate that the ideal ratio of mesopore to micropore area is 0.463. This ratio not only promotes the diffusion of Fe³⁺ but also creates additional active sites for Fe³⁺ loading, leading to an increase in the number of available FeN₄ sites in FeNC electrocatalysts during pyrolysis. The density (76.5 μmol g^-1) and utilization (21.08 %) of d-FeNC-30 are significantly higher than those of FeNC without plasma treatment, with a 2.8-fold and 2-fold increase, respectively. Remarkably, it displays outstanding performance, evidenced by a half-wave potential of 0.835 V (vs. RHE) in a 0.1 M HClO₄ solution and a power density of 0.860 W cm^-2 in proton exchange membrane fuel cells (PEMFCs). The developed plasma-assisted approach for improving the site density (SD) and utilization of FeN₄ provides a new perspective for high-performance ORR FeNC catalysts.

Licorice-saponin A3 is a broad-spectrum inhibitor for COVID-19 by targeting viral spike and anti-inflammation

Currently, human health due to corona virus disease 2019 (COVID-19) pandemic has been seriously threatened. The coronavirus severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spike (S) protein plays a crucial role in virus transmission and several S-based therapeutic approaches have been approved for the treatment of COVID-19. However, the efficacy is compromised by the SARS-CoV-2 evolvement and mutation. Here we report the SARS-CoV-2 S protein receptor-binding domain (RBD) inhibitor licorice-saponin A3 (A3) could widely inhibit RBD of SARS-CoV-2 variants, including Beta, Delta, and Omicron BA.1, XBB and BQ1.1. Furthermore, A3 could potently inhibit SARS-CoV-2 Omicron virus in Vero E6 cells, with EC₅₀ of 1.016 μM. The mechanism was related with binding with Y453 of RBD determined by hydrogen-deuterium exchange mass spectrometry (HDX-MS) analysis combined with quantum mechanics/molecular mechanics (QM/MM) simulations. Interestingly, phosphoproteomics analysis and multi fluorescent immunohistochemistry (mIHC) respectively indicated that A3 also inhibits host inflammation by directly modulating the JNK and p38 MAPK pathways and rebalancing the corresponding immune dysregulation. This work supports A3 as a promising broad-spectrum small molecule drug candidate for COVID-19.

Mycolactone A vs. B: Does localization or association explain isomer-specific toxicity?

Mycolactone is an exotoxin produced by Mycobacterium ulcerans that causes the neglected tropical skin disease Buruli ulcer. This toxin inhibits the Sec61 translocon in the endoplasmic reticulum (ER), preventing the host cell from producing many secretory and transmembrane proteins, resulting in cytotoxic and immunomodulatory effects. Interestingly, only one of the two dominant isoforms of mycolactone is cytotoxic. Here, we investigate the origin of this specificity by performing extensive molecular dynamics (MD) simulations with enhanced free energy sampling to query the association trends of the two isoforms with both the Sec61 translocon and the ER membrane, which serves as a toxin reservoir prior to association. Our results suggest that mycolactone B (the cytotoxic isoform) has a stronger association with the ER membrane than mycolactone A due to more favorable interactions with membrane lipids and water molecules. This could increase the reservoir of toxin proximal to the Sec61 translocon. Isomer B also interacts more closely with the lumenal and lateral gates of the translocon, the dynamics of which are essential for protein translocation. These interactions induce a more closed conformation, which has been suggested to block signal peptide insertion and subsequent protein translocation. Collectively, these findings suggest that isomer B's unique cytotoxicity is a consequence of both increased localization to the ER membrane and channel-locking association with the Sec61 translocon, facets that could be targeted in the development of Buruli Ulcer diagnostics and Sec61-targeted therapeutics.

A Facile Way to Fabricate GO-EDA/Al2O3 Tubular Nanofiltration Membranes with Enhanced Desalination Stability via Fine-Tuning the pH of the Membrane-Forming Suspensions

Pristine graphene oxide (GO)-based membranes have proven promising for molecular and ion separation owing to efficient molecular transport nanochannels, but their separation ability in an aqueous environment is limited by the natural swelling tendency of GO. To obtain a novel membrane with anti-swelling behavior and remarkable desalination capability, we used the Al₂O₃ tubular membrane with an average pore size of 20 nm as the substrate and fabricated several GO nanofiltration ceramic membranes with different interlayer structures and surface charges by fine-tuning the pH of the GO-EDA membrane-forming suspension (pH = 7, 9, 11). The resultant membranes could maintain desalination stability, whether immersed in water for 680 h or operated under a high-pressure environment. When the pH of the membrane-forming suspension was 11, the prepared GE-11 membrane showed a rejection of 91.5% (measured at 5 bar) towards 1 mM Na₂SO₄ after soaking in water for 680 h. An increase in the transmembrane pressure to 20 bar resulted in an increase in the rejection towards the 1 mM Na₂SO₄ solution to 96.3%, and an increase in the permeance to 3.7 L·m^-2·h^-1·bar^-1. The proposed strategy in varying charge repulsion is beneficial to the future development of GO-derived nanofiltration ceramic membranes.

Synthesis of bis-spiro piperidines using nano γ-alumina supported Sb(v) under ultrasonic irradiation at room temperature conditions

Group VA metalloid ion Lewis acids, Sb(v) was identified as a highly potent catalyst for the one-pot three-component synthesis of bis-spiro piperidine derivatives. The reaction was performed using amines, formaldehyde, and dimedone under ultrasonic irradiation at room temperature. The strong acidic property of the nano γ-alumina supported antimony(v) chloride plays a key role in accelerating the rate of the reaction and initiates the reaction smoothly. The heterogeneous nanocatalyst was fully characterized by FT-IR spectroscopy, XRD, EDS, TGA, FESEM, TEM, and BET techniques. Also, the structures of the prepared compounds were characterized by ¹H NMR and FT-IR spectroscopies.

Radical Decarboxylative Carbon-Nitrogen Bond Formation

The carbon-nitrogen bond is one of the most prevalent chemical bonds in natural and artificial molecules, as many naturally existing organic molecules, pharmaceuticals, agrochemicals, and functional materials contain at least one nitrogen atom. Radical decarboxylative carbon-nitrogen bond formation from readily available carboxylic acids and their derivatives has emerged as an attractive and valuable tool in modern synthetic chemistry. The promising achievements in this research topic have been demonstrated via utilizing this strategy in the synthesis of complex natural products. In this review, we will cover carbon-nitrogen bond formation via radical decarboxylation of carboxylic acids, Barton esters, MPDOC esters, N-hydroxyphthalimide esters (NHP esters), oxime esters, aryliodine(III) dicarboxylates, and others, respectively. This review aims to bring readers a comprehensive survey of the development in this rapidly expanding field. We hope that this review will emphasize the knowledge, highlight the proposed mechanisms, and further disclose the fascinating features in modern synthetic applications.