Carbamazepine and diclofenac: removal in wastewater treatment plants and occurrence in water bodies

A fundamental study on the degradation of paracetamol under single- and dual-frequency ultrasound

The degradation of paracetamol, a widely found emerging pharmaceutical contaminant, was investigated under a wide range of single-frequency and dual-frequency ultrasonic irradiations. For single-frequency ultrasonic irradiation, plate transducers of 22, 98, 200, 300, 400, 500, 760, 850, 1000, and 2000 kHz were employed and for dual-frequency ultrasonic irradiation, the plate transducers were coupled with a 20 kHz ultrasonic horn in opposing configuration. The sonochemical activity was quantified using two dosimetry methods to measure the yield of HO• and H2O2 separately, as well as sonochemiluminescence measurement. Moreover, the severity of the bubble collapses as well as the spatial and size distribution of the cavitation bubbles were evaluated via sonoluminescence measurement. The paracetamol degradation rate was maximised at 850 kHz, in both single and dual-frequency ultrasonic irradiation. A synergistic index higher than 1 was observed for all degrading frequencies (200 - 1000 kHz) under dual-frequency ultrasound irradiation, showing the capability of dual-frequency system for enhancing pollutant degradation. A comparison of the results of degradation, dosimetry, and sonoluminescence intensity measurement revealed the stronger dependency of the degradation on the yield of HO• for both single and dual-frequency systems, which confirms degradation by HO• as the main removal mechanism. However, an enhanced degradation for frequencies higher than 500 kHz was observed despite a lower HO• yield, which could be attributed to the improved mass transfer of hydrophilic compounds at higher frequencies. The sonoluminescence intensity measurements showed that applying dual-frequency ultrasonic irradiation for 200 and 400 kHz made the bubbles larger and less uniform in size, with a portion of which not contributing to the yield of reactive oxidant species, whereas for the rest of the frequencies, dual-frequency ultrasound irradiation made the cavitation bubbles smaller and more uniform, resulting in a linear correlation between the overall sonoluminescence intensity and the yield of reactive oxidant species.

Management of hazardous fly-ash energy waste in the adsorptive removal of diclofenac by the use of synthetic zeolitic materials

Zeolite-carbon composites (Na-P1(C), Na-X(C)) and pure zeolites (Na-P1, Na-X) were synthesized from hazardous high-carbon fly ash waste (HC FA) via hydrothermal reaction with sodium hydroxide (NaOH). These solids were applied in the removal of diclofenac (DCF) from aqueous solution, with and without poly(acrylic acid) (PAA). The experiments included adsorption-desorption measurements, as well as electrokinetic and stability analyses. The obtained results showed that HC FA and Na-P1(C) had the greatest adsorption capacity towards DCF, i.e., 26.51 and 21.19 mg/g, respectively. PAA caused considerable decrease in the DCF adsorption due to the competition of both adsorbates of anionic character for active sites. For example, the adsorbed amount of DCF on Na-P1 without PAA was 14.11 mg/g, whereas the one measured with PAA was 5.08 mg/g. Most of prepared solids were effectively regenerated by the use of NaOH. Desorption degree reached even 73.65% in the single systems (with one adsorbate) and 97.24% in the mixed ones (with two adsorbates). Zeolitic materials formed suspensions of rather low stability, which underwent further deterioration in the organic molecules presence. All the results obtained in this study indicated that HC FA can be successfully managed in the removal of organic substances.

Synthesis of novel PANI/PVA-NiCu composite material for efficient removal of organic dyes

The present work aims the synthesis of a novel, low cost, and environmentally friendly PANI/PVA-CuNi composite by chemical oxidative polymerization of aniline monomer and polyvinyl alcohol (PVA) as film matrix; several percentages of copper (Cu) and Nickel (Ni) were used. UV-Visible spectroscopy, FTIR, SEM-EDX, and TGA were used to characterize the nanocomposites. While PANI/PVA-CuNi nanocomposites were investigated in adsorption experiments of methylene blue (MB) under different controlled conditions (time reaction, adsorbent dosage, initial dye concentration, stirring speed, temperature, and pH of the medium) also various kinetic models were employed to evaluate the efficiency of the adsorption. The results revealed that the10 mg of PANI/PVA-Cu₅₀N_i50 and PANI/PVA-Ni composites Catalyst removed (94% and 93% of methylene blue in 180 min respectively at 10^-5 M initial concentration of dye, pH of 13, stirring speed of 150 rpm, the temperature of 301 k. the kinetics data were properly fitted with the pseudo second-order model with a correlation coefficient of 0.98262 and 0.95881 using PANI/PVA-Cu₅₀N_i50 and PANI/PVA-Ni, respectively.

Removal of emerging contaminants in conventional and advanced biological wastewater treatment plants in India-a comparison of treatment technologies

Emerging contaminants (ECs) are a growing concern for the environment and human health. The study investigates 20 commonly reported ECs in 10 wastewater treatment plants (WWTPs) in urban to semi-urban settlements of north India over two years in the summer and winter. The selected plants were based on waste stabilization pond (WSP), up-flow anaerobic sludge blanket (UASB), activated sludge process (ASP), anoxic-aerobic process (AO), anaerobic-anoxic-oxic process, biodenipho process, sequencing batch reactor, and densadeg-biofor process. Of the 20 ECs, all 20 were identified in the influent and effluent, and 13 were identified in the final sludge on at least one occasion. The concentration in the influent, effluent, and sludge varied in the range from 2.5 ng/L to 77.4 μg/L, below limit of detection (LOD) to 1.984 μg/L, and < LOD to 1.41 μg/g, respectively. Acetaminophen and caffeine were predominately detected in the influent, whereas naproxen, ciprofloxacin, and carbamazepine were predominant in the effluent. The total removal in the plants was found in the range of 40.3-68.6%, mainly attributed to biodegradation/biotransformation. Removal of ECs by WWTPs, ranked by a relative removal criterion, followed the order: Biological nutrient removal based plants > WSP > UASB > densadeg-biofor > AO > ASP > combitreat-SBR. The risk assessment showed the risk to algae from antibiotics and triclosan, daphnia from triclosan, and fish from triclosan and hormones.

Nonsteroidal anti-inflammatory drug monitoring in serum: a Tb-MOF-based luminescent mixed matrix membrane detector with high sensitivity and reliability

The identification of drugs or biomolecules for public health monitoring requires facile analytical technologies with excellent sensitivity, portability and reliability. In the past decades, different sensing materials have inspired the development of various bioanalytical strategies. However, sensing platforms based on powder materials are not suitable for medical diagnosis, which limits further exploration and application of biosensors. Herein, a point-of-care testing (POCT) membrane was designed from an energy competition mechanism and achieved the detection of the nonsteroidal antiphlogistic diclofenac, and exhibited remarkable testing efficacy at the ppb level. The mixed matrix membrane (MMM) sensor consists of electrospun polyacrylonitrile nanofibers and luminescent Tb-MOFs and possess the advantages of high stability, outstanding anti-interference ability, efficient detection (LOD = 98.5 ppb) and easy visual recognition. Furthermore, this MMM sensor exhibits excellent recyclability in serum, which is beneficial for developing a portable and convenient device to distinguish diclofenac in practical sensing applications. Meanwhile, the feasibility and mechanism of this recyclable sensor were verified by theory and experiments, indicating that it is a promising device for diclofenac detection in biological environments to evaluate the toxic effect caused by the accumulation of nonsteroidal drugs.

Effects of carbamazepine on gut microbiota, ARGs and intestinal health in zebrafish

Carbamazepine (CBZ) in the aquatic environment is recognized as a potential threat to aquatic organisms and public health. However, the response of organism intestinal health, resistome, microbiota, and their relationship after CBZ exposure has been rarely reported. This study aimed to explore the impacts of CBZ on gut microbiota, antibiotic resistance genes (ARGs) and the expression of intestinal health related genes as well as their interaction using the zebrafish model. 16 S ribosomal RNA sequencing indicated CBZ altered the composition of gut microbiota. Using high-throughput quantitative polymerase chain reaction (HT-qPCR), we found the number and abundance of ARGs were impacted by CBZ levels and exposure duration. We also observed the upregulated expression of the pro-inflammatory gene IL6 and downregulated expression of toll-like receptor gene TLR2 and intestinal barrier gene TJP2a at different exposure times. Correlation analyses revealed that Geobacillus, Rhodococcus, Ralstonia, Delftia, Luteolibacter and Escherichia-Shigella might be the main bacterial genera carrying ARGs. Meanwhile, Cetobacterium and Aeromonas could be the dominant bacteria affecting intestinal health related genes. Our results could contribute to understanding the health risks of CBZ to the intestinal microecology of aquatic animals.

Neuroactive pharmaceuticals in estuaries: Occurrence and tissue-specific bioaccumulation in multiple fish species

Contamination of surface waters by pharmaceuticals is an emerging problem globally. This is because the increased access and use of pharmaceuticals by a growing world population lead to environmental contamination, threatening non-target species in their natural environment. Of particular concern are neuroactive pharmaceuticals, which are known to bioaccumulate in fish and impact a variety of individual processes such as fish reproduction or behaviour, which can have ecological impacts and compromise fish populations. In this work, we investigate the occurrence and bioaccumulation of 33 neuroactive pharmaceuticals in brain, muscle and liver tissues of multiple fish species collected in four different estuaries (Douro, Tejo, Sado and Mira). In total, 28 neuroactive pharmaceuticals were detected in water and 13 in fish tissues, with individual pharmaceuticals reaching maximum concentrations of 1590 ng/L and 207 ng/g ww, respectively. The neuroactive pharmaceuticals with the highest levels and highest frequency of detection in the water samples were psychostimulants, antidepressants, opioids and anxiolytics, whereas in fish tissues, antiepileptics, psychostimulants, anxiolytics and antidepressants showed highest concentrations. Bioaccumulation was ubiquitous, occurring in all seven estuarine and marine fish species. Notably, neuroactive compounds were detected in every water and fish brain samples, and in 95% of fish liver and muscle tissues. Despite variations in pharmaceutical occurrence among estuaries, bioaccumulation patterns were consistent among estuarine systems, with generally higher bioaccumulation in fish brain followed by liver and muscle. Moreover, no link between bioaccumulation and compounds' lipophilicity, species habitat use patterns or trophic levels was observed. Overall, this work highlights the occurrence of a highly diverse suite of neuroactive pharmaceuticals and their pervasiveness in waters and fish from estuarine systems with contrasting hydromorphology and urban development and emphasizes the urgent need for toxicity assessment of these compounds in natural ecosystems, linked to internalized body concentration in non-target species.

Degradation of carbamazepine over MOFs derived FeMn@C bimetallic heterogeneous electro-Fenton catalyst

A highly efficient heterogeneous electro-Fenton (Hetero-EF) catalyst with core-shell structure was successfully prepared by calcination of Mn-doped Mil-53 (Fe) precursor at high temperature. FeMn@C-800/2 prepared at pyrolysis temperature of 800 °C and Fe:Mn molar doping ratio of 2:1 showed the best catalytic performance for the degradation of carbamazepine (CBZ). The characterization, properties and stability of FeMn@C-800/2 were systematically investigated, obtaining the apparent first-order reaction rate of Hetero-EF was 8.9 and 17.8 times higher than that on Fe@C-800 and Mn@C-800 at the optimized conditions of current density 10 mA cm^-2, catalyst dosage of 50 mg L^-1 and initial pH 4.0, respectively. The incorporation of Mn promoted the generation of more Fe⁰ and Fe₃C during the pyrolysis process, and enhanced the internal micro-electrolysis between Fe⁰ and carbon shell. At the same time, the presence of Mn⁰ also promoted the regeneration of Fe²⁺, and improved the activity of iron-carbon heterogeneous catalysis in the EF process, so as to degrade organic pollutants more effectively. This work would help to gain insight into the design of MOFs derived Fe-Mn bimetal catalyst and its mechanism for enhanced heterogeneous electro-Fenton.

Mechanism analysis of efficient degradation of carbamazepine by chalcopyrite-activated persulfate

In this study, natural chalcopyrite (NCP) was used to activate peroxymonosulfate (PMS) to degrade carbamazepine (CBZ) oxidatively. Before and after the NCP reaction, the physical and chemical properties were characterized by SEM-EDS, XRD, XPS, XRF, and VSM. The effects of the amount of NCP and PMS, the initial pH value, and the reaction temperature on the catalytic performance of NCP were systematically studied. The research results show that the degradation efficiency of the NCP/PMS system for CBZ can reach 82.34% under the optimal reaction conditions, and the degradation process follows a pseudo-second-order kinetic model. The results of the radical quenching experiment and EPR analysis show that the active species in the system are OH·, SO₄^-·, and ¹O², of which SO₄^-· is the main active species. In addition, this study shows that the NCP/PMS system can degrade CBZ with high efficiency of 90.73% only with the assistance of 0.15 g/L Fe⁰. This study determined the optimal reaction conditions for natural chalcopyrite to activate PMS to degrade CBZ and clarified the activation mechanism, which broadened the application of natural ores in the field of water treatment.

Adsorption of Diclofenac Sodium by Aged Degradable and Non-Degradable Microplastics: Environmental Effects, Adsorption Mechanisms

Microplastics (MPs) are novel pollutants, which can carry toxic contaminants and are released in biota and accumulate. The adsorption behavior of MPs and aged MPs has attracted extensive attention. In this paper, the aging process of polystyrene (PS) and poly (butyleneadipate-co-terephthalate) (PBAT) plastics under ultraviolet (UV) irradiation at a high temperature and their adsorption properties for the contaminant diclofenac sodium (DCF) before and after aging was investigated. There are many factors affecting the adsorption capacity of MPs. In this experiment, three aspects of MPs, organic pollutants, and environmental factors are explored. The Freundlich model as well as the pseudosecondary kinetic model is more applicable to the process of DCF adsorption by MPs. The main effects of adsorption of organic pollutants by MPs are electrostatic interactions, hydrogen-halogen bonds, and hydrophobic interactions. The adsorption capacity of the UV-aged MPs on DCF is significantly enhanced, and the order of adsorption capacity is Q(A-PBAT) (27.65 mg/g) > Q (A-PS) (23.91 mg/g) > Q (PBAT) (9.30 mg/g) > Q (PS) (9.21 mg/g). The results show that more active sites are generated on the surface of MPs after aging, which can enhance their adsorption capacity for organic pollutants. This adsorption mechanism will increase their role as contaminant carriers in the aquatic food chain.

Metabolism of the aquatic pollutant diclofenac in the Lymnaea stagnalis freshwater gastropod

The metabolism of organic contaminants in Lymnaea stagnalis freshwater gastropod remains unknown. Yet, pharmaceuticals-like the NSAID diclofenac-are continuously released in the aquatic environment, thereby representing a risk to aquatic organisms. In addition, lower invertebrates may be affected by this pollution since they are likely to bioaccumulate contaminants. The metabolism of pharmaceuticals in L. stagnalis requires further investigation to understand their detoxification mechanisms and characterized the risk posed by contaminant exposure in this species. In this study, a non-targeted strategy using liquid chromatography combined with high-resolution mass spectrometry was applied to highlight metabolites formed in L. stagnalis freshwater snails exposed to 300 µg/L diclofenac for 3 and 7 days. Nineteen metabolites were revealed by this approach, 12 of which were observed for the first time in an aquatic organism exposed to diclofenac. Phase I metabolism involved hydroxylation, with detection of 3'-, 4'-, and 5-hydroxydiclofenac and three dihydroxylated metabolites, as well as cyclization, oxidative decarboxylation, and dehydrogenation, while phase II metabolism consisted of glucose and sulfate conjugation. Among these reactions, the two main DCF detoxification pathways detected in L. stagnalis were hydroxylation (phase I) and glucosidation (phase II).

The development of disposable electrochemical sensor based on MoSe2-rGO nanocomposite modified screen printed carbon electrode for amitriptyline determination in the presence of carbamazepine, application in biological and water samples

The present attempt developed a simple sensing system based on the modification of screen-printed carbon electrode (SPCE) with MoSe₂/reduced graphene oxide (rGO) nanocomposite (MoSe₂-rGO/SPCE) to voltammetrically co-detect amitriptyline and carbamazepine. Different techniques such as field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray (EDX), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) were employed to characterize MoSe₂-rGO nanocomposite morphology and structure. Moreover, chronoamperometry, differential pulse voltammetry (DPV) and linear sweep voltammetry (LSV) were utilized to explore the electrochemical oxidation of amitriptyline. Data revealed a great current sensitivity for the MoSe₂-rGO/SPCE towards amitriptyline. The peak currents of amitriptyline oxidation on the MoSe₂-rGO/SPCE had linear dynamic range (0.02-380.0 μM) and a narrow limit of detection (0.007 μM). The MoSe₂-rGO/SPCE was successful in sensing carbamazepine and amitriptyline in real specimens, with appreciable recovery rates.

Removal of carbamazepine, venlafaxine and iohexol from wastewater effluent using coupled microalgal-bacterial biofilm

We evaluated the removal capacity of a coupled microalgal-bacterial biofilm (CMBB) to eliminate three recalcitrant pharmaceuticals. The CMBB's efficiency, operating at different biofilm concentrations, with or without light, was compared and analyzed to correlate these parameters to pharmaceutical removal and their effect on the microorganism community. Removal rates changed with changing pharmaceutical and biofilm concentrations: higher biofilm concentrations presented higher removal. Removal of 82-94% venlafaxine and 18-51% carbamazepine was obtained with 5 days of CMBB treatment. No iohexol removal was observed. Light, microorganism composition, and dissolved oxygen concentration are essential parameters governing the removal of pharmaceuticals and ammonia. Chlorophyll concentration increased with time, even in the dark. Three bacterial phyla were dominant: Proteobacteria, Bacteroidetes and Firmicutes. The dominant eukaryotic supergroups were Archaeplastida, Excavata and SAR. A study of the microorganisms' community indicated that not only do the species in the biofilm play an important role; environment, concentration and interactions among them are also important. CMBB has the potential to provide low-cost and sustainable treatment for wastewater and recalcitrant pharmaceutical removal. The microenvironments on the biofilm created by the microalgae and bacteria improved treatment efficiency.

Hydroxyl-modified zirconia/porous carbon nanocomposite used as a highly efficient and renewable adsorbent for removal of carbamazepine from water

Metal-organic frameworks (MOFs) derived metal oxides/porous carbon nanocomposites were used as adsorbents to remove pollutants from wastewater. The adsorption performance of the metal oxides/porous carbon nanocomposites could be improved by introducing functional groups. In this study, hydroxyl-modified zirconia/porous carbon nanocomposite (C-UiO-66-OH) was prepared and tested, choosing carbamazepine as a typical pollutant. The results showed that the adsorption capacity (186.21 mg g^-1) of C-UiO-66-OH was 6.96 times to that of normal UiO-66. The Langmuir isotherm model and pseudo-first-order kinetic model was well fit the adsorption process. The thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic. The adsorbent regeneration could be accomplished by washing C-UiO-66-OH with ethanol and DI water. The good adsorption/desorption performance comes from the synergistic effect of (EDA) interaction and hydrogen bond between C-UiO-66-OH and CBZ molecule. A membrane prepared by immobilizing C-UiO-66-OH into melamine foam (MF) with sodium alginate (SA) was also investigated for CBZ adsorption. The results indicated the excellent removal efficiency (86.0%) and good regeneration of the prepared membrane. Therefore, this paper provides an efficient and applicable way to remove CBZ from water.

Exploiting Virus Infection to Protect Plants from Abiotic Stresses: Tomato Protection by a Begomovirus

Tomato cultivation is threatened by environmental stresses (e.g., heat, drought) and by viral infection (mainly viruses belonging to the tomato yellow leaf curl virus family-TYLCVs). Unlike many RNA viruses, TYLCV infection does not induce a hypersensitive response and cell death in tomato plants. To ensure a successful infection, TYLCV preserves a suitable cellular environment where it can reproduce. Infected plants experience a mild stress, undergo adaptation and become partially "ready" to exposure to other environmental stresses. Plant wilting and cessation of growth caused by heat and drought is suppressed by TYLCV infection, mainly by down-regulating the heat shock transcription factors, HSFA1, HSFA2, HSFB1 and consequently, the expression of HSF-regulated stress genes. In particular, TYLCV captures HSFA2 by inducing protein complexes and aggregates, thus attenuating an acute stress response, which otherwise causes plant death. Viral infection mitigates the increase in stress-induced metabolites, such as carbohydrates and amino acids, and leads to their reallocation from shoots to roots. Under high temperatures and water deficit, TYLCV induces plant cellular homeostasis, promoting host survival. Thus, this virus-plant interaction is beneficial for both partners.

Ultrasensitive electrochemical sensor for the detection of carbamazepine based on gadolinium vanadate nanostructure decorated functionalized carbon nanofiber nanocomposite

The gadolinium vanadate nanostructure decorated functionalized carbon nanofiber (GdVO₄/f-CNF) nanocomposite was prepared by the hydrothermal method, which is fabricated on a glassy carbon electrode (GCE) for the determination of carbamazepine (CBZ). The structural morphology of the hydrothermally synthesized GdVO₄/f-CNF material was investigated by several spectroscopy methods such as FESEM, HRTEM, EDS-mapping, XRD, XPS, and Raman. Moreover, the electrical conductivity of our synthesized material was inspected by the electrochemical impedance spectroscopy (EIS) analysis, and the electrochemical performance towards CBZ was inspected by the cyclic voltammetry (CV) and amperometry (AMP) analysis under optimized conditions. The AMP determination of CBZ exhibits the lowest level LOD of 0.0018 μM and a good linear range of 0.01-157 μM. Additionally, our proposed sensor was used to determine the CBZ in the pharmaceutical and, human urine samples which have exposed the acceptable recoveries.

Enzyme immobilization on biomass-derived carbon materials as a sustainable approach towards environmental applications

Enzymes with their environment-friendly nature and versatility have become highly important 'green tools' with a wide range of applications. Enzyme immobilization has further increased the utility and efficiency of these enzymes by improving their stability, reusability, and recyclability. Biomass-derived matrices when used for enzyme immobilization offer a sustainable solution to environmental pollution and fuel depletion at low costs. Biochar and other biomass-derived carbon materials obtained are suitable for the immobilization of enzymes through different immobilization strategies. Environmental pollution has become an utmost topic of research interest due to an ever-increasing trend being observed in anthropogenic activities. This has widely contributed to the release of various toxic effluents into the environment in their native or metabolized forms. Therefore, more focus is being directed toward the utilization of immobilized enzymes in the bioremediation of water and soil, biofuel production, and other environmental applications. In this review, up-to-date literature concerning the immobilization and potential uses of enzymes immobilized on biomass-derived carbon materials has been presented.

A Comprehensive Review for Removal of Non-Steroidal Anti-Inflammatory Drugs Attained from Wastewater Observations Using Carbon-Based Anodic Oxidation Process

Non-steroidal anti-inflammatory drugs (NSAIDs) (concentration <µg/L) are globally acknowledged as hazardous emerging pollutants that pass via various routes in the environment and ultimately enter aquatic food chains. In this context, the article reviews the occurrence, transport, fate, and electrochemical removal of some selected NSAIDs (diclofenac (DIC), ketoprofen (KTP), ibuprofen (IBU), and naproxen (NPX)) using carbon-based anodes in the aquatic environment. However, no specific protocol has been developed to date, and various approaches have been adopted for the sampling and elimination processes of NSAIDs from wastewater samples. The mean concentration of selected NSAIDs from different countries varies considerably, ranging between 3992−27,061 µg/L (influent wastewater) and 1208−7943 µg/L (effluent wastewater). An assessment of NSAIDs removal efficiency across different treatment stages in various wastewater treatment plants (WWTPs) has been performed. Overall, NSAIDs removal efficiency in wastewater treatment plants has been reported to be around 4−89%, 8−100%, 16−100%, and 17−98% for DIC, KTP, NPX, and IBU, respectively. A microbiological reactor (MBR) has been proclaimed to be the most reliable treatment technique for NSAIDs removal (complete removal). Chlorination (81−95%) followed by conventional mechanical biological treatment (CMBT) (94−98%) treatment has been demonstrated to be the most efficient in removing NSAIDs. Further, the present review explains that the electrochemical oxidation process is an alternative process for the treatment of NSAIDs using a carbon-based anode. Different carbon-based carbon anodes have been searched for electrochemical removal of selected NSAIDs. However, boron-doped diamond and graphite have presented reliable applications for the complete removal of NSAIDs from wastewater samples or their aqueous solution.

Spatial monitoring and health risk assessment of polybrominated diphenyl ethers in environmental matrices from an industrialized impacted canal in South Africa

This study investigates the pollution of Markman stormwater runoff, which is a tributary to Swartkops River Estuary. Solid-phase and ultrasonic extraction methods were utilized in the extraction of water and sediment samples, respectively. The pH of the sampling sites was above the EU guideline. The ranges of concentration of [Formula: see text]PBDE obtained in water and sediment samples for all the seasons were 58.47-1357 ng/L and 175-408 ng/g, respectively. Results also showed that BDE-66 was the dominant congener, specifically in the industrial zone, where its concentrations ranged from 2 to 407 ng/g in sediment. Consequently, the high concentration of BDE- 66 in the sediment of stormwater calls for concern. Penta-BDE suggests potential moderate eco-toxicological risk, as evident in the calculated risk assessment. The result showed possible photodegradation along the contaminant's travel time, as only 7% of the PBDE was detected at the point of entry into the Swartkops River Estuary. Markman stormwater may be contributing heavily to the pollution load of Swartkops River, as evident in the alarming concentrations of PBDEs obtained. The industries at this zone should eliminate the contaminants before discharging their effluents into the canal.

Removal of Amoxicillin from Aqueous Media by Fenton-like Sonolysis/H2O2 Process Using Zero-Valent Iron Nanoparticles

High concentrations of antibiotics have been identified in aqueous media, which has diminished the quality of water resources. These compounds are usually highly toxic and have low biodegradability, and there have been reports about their mutagenic or carcinogenic effects. The aim of this study was to apply zero-valent iron-oxide nanoparticles in the presence of hydrogen peroxide and the sonolysis process for the removal of the amoxicillin antibiotic from aqueous media. In this study, zero-valent iron nanoparticles were prepared by an iron chloride reduction method in the presence of sodium borohydride (NaBH4), and the obtained nanoparticles were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and vibrating-sample magnetometry (VSM). Then, using a Fenton-like process, synthetic wastewater containing 100 to 500 mg/L amoxicillin antibiotic was investigated, and the effects of different parameters, such as the frequency (1 and 2 kHz), contact time (15 to 120 min), the concentration of hydrogen peroxide (0.3%, 0.5%, and 6%), the dose of zero-valent iron nanoparticles (0.05, 0.1, 0.5 g/L), and pH (3, 5, 10) were thoroughly studied. A pH of 3, hydrogen peroxide concentration of 3%, ultrasonic-wave frequency of 130 kHz, zero-valent iron nanoparticles of 0.5 g/L, and contaminant concentration of 100 mg/L were obtained as the optimal conditions of the combined US/H2O2/nZVI process. Under the optimal conditions of the combined process of zero-valent iron nanoparticles and hydrogen peroxide in the presence of ultrasonic waves, a 99.7% removal efficiency of amoxicillin was achieved in 120 min. The results show that the combined US/H2O2/nZVI process could be successfully used to remove environmental contaminants, including antibiotics such as amoxicillin, with a high removal percentage.

Theoretical study of the interaction of fullerenes with the emerging contaminant carbamazepine for detection in aqueous environments

The global increase in drug consumption exposes the growing need to develop new systems for the detection, capture, and treatment of bioactive molecules. Carbamazepine is one instance of such contaminants at the top of the ranking commonly found in sewage treatment systems. This work, therefore, presents a theoretical study of fullerene C₆₀ and its derivatives with substitutional doping with B, Al, Ga, Si, Ge, N and P, for the detection and capture of carbamazepine is aqueous medium. Solvation effects were included by means of the Polarizable Continuum Solvent method. The results indicate that doped fullerenes are sensitive for the detection of carbamazepine both in gaseous and aquatic environments. Investigation on the intermolecular interactions between the drug and the fullerene molecule were carried out, allowing the characterization of the interactions responsible for stabilizing the adsorption of carbamazepine to the fullerenes. The theoretical survey revealed that fullerenes doped with Al, Ga, Si and Ge chemically adsorb carbamazepine whereas for the case of fullerenes doped with other heteroatoms physisorption is responsible for the molecular recognition. Relying on DFT calculations, the fullerene derivatives C₅₉Al, C₅₉Si and C₅₉Ga are the most suitable to act both as a sensor and to uptake carbamazepine in aquatic environments.

Removal of Diclofenac-Na from aqueous solution onto H3PO4 modified composite clay

Under batch experiment conditions, this work seeks to successfully remove Diclofenac-Na (DCF-Na) from an aqueous solution utilizing a composite sorbent made of Bentonite, Kaolinite clay, and Worm casting (BKW). This study investigated the structural modification of the H3PO4 Modified Clay by X-ray fluorescence and the effect of selected adsorption factors – DCF-Na concentration and modified BKW composite dosage. The concentration equilibrium data was used to study six isotherm models. Freundlich isotherm model better explained the adsorption of DCF-Na onto modified BKW composite with a correlation coefficient close to 1. Kinetics models were examined, and the Elovich model gave a better fit than other kinetic models studied. Mass diffusion mechanisms and thermodynamics studies were successfully carried out. The enthalpy change values evaluated were negative, which revealed the spontaneity of DCF-Na remediation onto modified BKW, and that DCF-Na adsorption is exothermic and occurred through a physisorption process.

Impacts of microplastics and carbamazepine on the shell formation of thick-shell mussels and the underlying mechanisms of action

Forming calcareous exoskeletons is crucial for the health and survival of calcifiers such as bivalves. However, the impacts of waterborne emergent pollutants on this important process remain largely unknown. In this study, the effects of two types of emergent pollutants, microplastics (MPs) and carbamazepine (CBZ), which are ubiquitously present in ocean environments, on shell formation were assessed in the thick-shell mussel (Mytilus coruscus) with a shell regeneration experiment. In addition, their impacts on the in vivo contents of ATP, Ca²⁺, carbonic anhydrase (CA), and bone morphogenetic protein receptor type-2 (BMPR2), the activity of phosphofructokinase (PFK) and Ca²⁺-ATPase, and the expression of shell-formation related genes were analyzed. The data collected demonstrated that shell regeneration after mechanical injury was significantly arrested by CBZ and/or MPs. Besides, all the physiological and molecular parameters investigated were markedly suppressed by these two pollutants. Furthermore, synergistic impacts on most of the parameters examined were observed between CBZ and MPs. Our results indicate that these two pollutants may disrupt shell formation by constraining the availability of raw materials and energy, inhibiting the formation of the organic shell matrix, and interfering with the regulation of crystallization, which may have far-reaching impacts on the health of marine calcifiers.

Effect of Biogenic Silica Behavior in the Incorporation of Mesoporous Anatase TiO2 for Excellent Photocatalytic Mineralization of Sodium Diclofenac

TiO2/SiO2 composites were synthesized via a simple sol gel method by surface reduction of Ti4+ ions to Ti3+ using titanium isopropoxide as a TiO2 precursor and rice husks (RHA) as a SiO2 source. The silica content and calcination temperature of the materials were evaluated. Thermal, crystallographic and physicochemical aspects suggest that biogenic silica (SiO2) can improve the thermal stability of the anatase phase of TiO2, when the SiO2 content reaches 20%. The N2 adsorption-desorption isotherms showed that the SiO2-modified samples have uniform pore diameters and a large specific surface area. The XPS analysis showed the surface reduction of Ti4+ ions to Ti3+ within the TiO2 network via oxygen vacancies after SiO2 introduction, which is beneficial for the photocatalytic reaction. Photocatalytic degradation of sodium diclofenac (SDFC) shows that TiO2/SiO2 composites have better activity compared to commercial P25. Mesoporous TiO2 composite modified with 20 wt% SiO2 showed better photocatalytic mineralization than P25 (83.7% after 2 h instead of 57.3% for P25). The excellent photocatalytic mineralization of the photocatalysts can be attributed to the high anatase crystallinity exhibited by XRD analysis, high specific surface area, surface hydroxyl groups, and the creation of oxygen vacancy, as well as the presence of Ti3+ ions.

Visible Light-Driven Advanced Oxidation Processes to Remove Emerging Contaminants from Water and Wastewater: a Review

The scientific data review shows that advanced oxidation processes based on the hydroxyl or sulfate radicals are of great interest among the currently conventional water and wastewater treatment methods. Different advanced treatment processes such as photocatalysis, Fenton's reagent, ozonation, and persulfate-based processes were investigated to degrade contaminants of emerging concern (CECs) such as pesticides, personal care products, pharmaceuticals, disinfectants, dyes, and estrogenic substances. This article presents a general overview of visible light-driven advanced oxidation processes for the removal of chlorfenvinphos (organophosphorus insecticide), methylene blue (azo dye), and diclofenac (non-steroidal anti-inflammatory drug). The following visible light-driven treatment methods were reviewed: photocatalysis, sulfate radical oxidation, and photoelectrocatalysis. Visible light, among other sources of energy, is a renewable energy source and an excellent substitute for ultraviolet radiation used in advanced oxidation processes. It creates a high application potential for solar-assisted advanced oxidation processes in water and wastewater technology. Despite numerous publications of advanced oxidation processes (AOPs), more extensive research is needed to investigate the mechanisms of contaminant degradation in the presence of visible light. Therefore, this paper provides an important source of information on the degradation mechanism of emerging contaminants. An important aspect in the work is the analysis of process parameters affecting the degradation process. The initial concentration of CECs, pH, reaction time, and catalyst dosage are discussed and analyzed. Based on a comprehensive survey of previous studies, opportunities for applications of AOPs are presented, highlighting the need for further efforts to address dominant barriers to knowledge acquisition.

Facile Synthesis of NiO/ZnO nanocomposite as an effective platform for electrochemical determination of carbamazepine

The pharmaceutical science demand for sustainable and selective electrochemical sensors which exhibit ultrasensitive capabilities for the monitoring of different drugs. In an attempt to build a useful electrochemical sensor, we describe a most efficient method for the fabrication of NiO/ZnO nanocomposite through aqueous chemical growth method. The successfully synthesized NiO/ZnO nanocomposite is successfully employed to modify a glassy carbon electrode in order to build a sensitive and reliable electrochemical sensor for the detection of carbamazepine (CBZ), an anticonvulsant drug. The morphological texture, functionalities and crystalline structure of prepared nanocomposite were determined via FTIR, XRD, EDX, TEM, and SEM analysis. In order to examine the charge transfer kinetics, the cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to exploit the electrochemical properties of the synthesized nanocomposite. The NiO/ZnO nanocomposite exhibited excellent electron transfer kinetics and less resistive behavior than the individual NiO and ZnO nanoparticles. The differential pulse voltammetry and cyclic voltammetry tools were used for the fluent determination of CBZ. Certain parameters were optimized to develop an effective method including optimum scan rate 60 mV/s, potential range from 0.4 to 1.4 V and BRB as supporting electrolyte with pH 3. The developed sensor showed exceptional response for CBZ under the linear dynamic range from 5 to 100 μM. The limit of detection of proposed NiO/ZnO sensor for the CBZ was calculated to be 0.08 μM. The analytical approach of prepared electrochemical sensor was investigated in different pharmaceutical formulation with acceptable percent recoveries ranging from 96.7 to 98.6%.

Health effects and risks associated with the occurrence of pharmaceuticals and their metabolites in marine organisms and seafood

Pharmaceuticals and their metabolites are continuously invading the marine environment due to their input from the land such as their disposal into the drains and sewers which is mostly followed by their transfer into wastewater treatment plants (WWTPs). Their incomplete removal in WWTPs introduces pharmaceuticals into oceans and surface water. To date, various pharmaceuticals and their metabolites have been detected in marine environment. Their occurrence in marine organisms raises concerns regarding toxic effects and development of drug resistant genes. Therefore, it is crucial to review the health effects and risks associated with the presence of pharmaceuticals and their metabolites in marine organisms and seafood. This is an important study area which is related to the availability of seafood and its quality. Hence, this study provides a critical review of the information available in literature which relates to the occurrence and toxic effects of pharmaceuticals in marine organisms and seafood. This was initiated through conducting a literature search focussing on articles investigating the occurrence and effects of pharmaceuticals and their metabolites in marine organisms and seafood. In general, most studies on the monitoring of pharmaceuticals and their metabolites in marine environment are conducted in well developed countries such as Europe while research in developing countries is still limited. Pharmaceuticals present in freshwater are mostly found in seawater and marine organisms. Furthermore, the toxicity caused by different pharmaceutical mixtures was observed to be more severe than that of individual compounds.

Prioritizing Pharmaceutical Contaminants in Great Lakes Tributaries Using Risk-Based Screening Techniques

In a study of 44 diverse sampling sites across 16 Great Lakes tributaries, 110 pharmaceuticals were detected of 257 monitored. The present study evaluated the ecological relevance of detected chemicals and identified heavily impacted areas to help inform resource managers and guide future investigations. Ten pharmaceuticals (caffeine, nicotine, albuterol, sulfamethoxazole, venlafaxine, acetaminophen, carbamazepine, gemfibrozil, metoprolol, and thiabendazole) were distinguished as having the greatest potential for biological effects based on comparison to screening-level benchmarks derived using information from two biological effects databases, the ECOTOX Knowledgebase and the ToxCast database. Available evidence did not suggest substantial concern for 75% of the monitored pharmaceuticals, including 147 undetected pharmaceuticals and 49 pharmaceuticals with screening-level alternative benchmarks. However, because of a lack of biological effects information, screening values were not available for 51 detected pharmaceuticals. Samples containing the greatest pharmaceutical concentrations and having the highest detection frequencies were from Lake Erie, southern Lake Michigan, and Lake Huron tributaries. Samples collected during low-flow periods had higher pharmaceutical concentrations than those collected during increased-flow periods. The wastewater-treatment plant effluent content in streams correlated positively with pharmaceutical concentrations. However, deviation from this correlation demonstrated that secondary factors, such as multiple pharmaceutical sources, were likely present at some sites. Further research could investigate high-priority pharmaceuticals as well as those for which alternative benchmarks could not be developed. Environ Toxicol Chem 2022;41:2221-2239. Published 2022. This article is a U.S. Government work and is in the public domain in the USA. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Quantification of 10,11-dihydro-10-hydroxy carbamazepine and 10,11-epoxycarbamazepine as the main by-products in the electrochemical degradation of carbamazepine

Carbamazepine (CBZ) is one of the most widely used antiepileptic drugs in Malaysia. It was detected frequently in wastewater. The electrochemical treatment process has been applied for the degradation of CBZ using graphite-PVC as an anode under these conditions: 0.5 g sodium chloride (NaCl)) as supporting electrolyte, 5 V and 0-60 min electrolysis time in 100 mL of solution. However, 10,11-dihydro10-hydroxy carbamazepine (HDX-CBZ) and 10,11-epoxycarbamazepine (EPX-CBZ) as the main by-product have been analysed and quantified using liquid chromatography-time of flight/mass spectrometry (LC-TOF/MS). Both by-products were analysed in positive ionization mode, and they were separated on a chromatographic C18 column (5 μm, 2 mm × 150 mm) at a flow rate of 0.3 mL/min. Solid-phase extraction (SPE) was applied as a pre-concentration step for the enhancement of the sensitivity and detectability for both HDX-CBZ and EPX-CBZ by-products. Methanol (MeOH) has been selected as the best elution solvent for both by-products compared to methyl tertiary butyl ether (MTBE) and acetone (AC). However, the recovery was 85% and 92% for HDX-CBZ and EPX-CBZ by-products, respectively. The limit of quantification (LOQ) was 0.588 and 0.109 µg/L for HDX-CBZ and EPX-CBZ by-products, respectively. After 20 min of electrolysis time, both by-products HDX-CBZ and EPX-CBZ appeared at maximum concentrations of 343 and 144 μg/L then they were decreased to 17.2 and 9.8 μg/L, respectively, after 40 min. At the end of electrochemical treatment, both by-products were completely eliminated after 60 min.

A review toward contaminants of emerging concern in Brazil: Occurrence, impact and their degradation by advanced oxidation process in aquatic matrices

This work presents data regarding the occurrence and treatment of Contaminants of Emerging Concern (CECs) in Brazil in the past decade. The literature review (2011-2021) revealed the detection of 87 pharmaceutical drugs and personal care products, 58 pesticides, 8 hormones, 2 illicit drugs, caffeine and bisphenol A in distinct matrices (i.e.: wastewater, groundwater, sea water, rainwater, surface water, drinking water and hospital effluent). Concentrations of CECs varied from ng-μg L^-1 depending on the location, compound and matrix. The inefficiency of conventional wastewater treatment methods on the removal of CECs and lack of basic sanitation in some regions in the country aggravates contamination of Brazilian aquatic environments and poses potential environmental and health risks. Advanced oxidation processes (AOPs) are pointed out as viable and efficient alternatives to degrade CECs and prevent environmental contamination. A total of 375 studies involving the use of AOPs in Brazilian aqueous matrices were published in the last decade. Fenton and photo-Fenton processes, photo-peroxidation, ozonation, electrochemical advanced oxidation and heterogeneous photocatalysis are some of the AOPs applied by Brazilian research groups. Although many works discuss the importance of applying these technologies for CECs removal in real treatment plants, most of these studies assess the treatment of distilled water or simulated effluent. Therefore, the conduction of studies applying AOPs in real matrices are critical to drive the implementation of these processes coupled to conventional water and wastewater treatment in real plants in order to prevent the contamination of environmental matrices by CECs in Brazil.

A Comprehensive Study of the Microbiome, Resistome, and Physical and Chemical Characteristics of Chicken Waste from Intensive Farms

The application of chicken waste to farmland could be detrimental to public health. It may contribute to the dissemination of antibiotic-resistance genes (ARGs) and antibiotic-resistant bacteria (ARB) from feces and their subsequent entry into the food chain. The present study analyzes the metagenome and resistome of chicken manure and litter obtained from a commercial chicken farm in Poland. ARB were isolated, identified, and screened for antibiogram fingerprints using standard microbiological and molecular methods. The physicochemical properties of the chicken waste were also determined. ARGs, integrons, and mobile genetic elements (MGE) in chicken waste were analyzed using high-throughput SmartChip qPCR. The results confirm the presence of many ARGs, probably located in MGE, which can be transferred to other bacteria. Potentially pathogenic or opportunistic microorganisms and phytopathogens were isolated. More than 50% of the isolated strains were classified as being multi-drug resistant, and the remainder were resistant to at least one antibiotic class; these pose a real risk of entering the groundwater and contaminating the surrounding environment. Our results indicate that while chicken manure can be sufficient sources of the nutrients essential for plant growth, its microbiological aspects make this material highly dangerous to the environment.

Occurrence, hazard, and risk of psychopharmaceuticals and illicit drugs in European surface waters

This study aimed to provide insights into the risk posed by psychopharmaceuticals and illicit drugs in European surface waters, and to identify current knowledge gaps hampering this risk assessment. First, the availability and quality of data on the concentrations of psychopharmaceuticals and illicit drugs in surface waters (occurrence) and on the toxicity to aquatic organisms (hazard) were reviewed. If both occurrence and ecotoxicity data were available, risk quotients (risk) were calculated. Where abundant ecotoxicity data were available, a species sensitivity distribution (SSD) was constructed, from which the hazardous concentration for 5% of the species (HC₅) was derived, allowing to derive integrated multi-species risks. A total of 702 compounds were categorised as psychopharmaceuticals and illicit drugs based on a combination of all 502 anatomical therapeutic class (ATC) 'N' pharmaceuticals and a list of illicit drugs according to the Dutch Opium Act. Of these, 343 (49%) returned occurrence data, while only 105 (15%) returned ecotoxicity data. Moreover, many ecotoxicity tests used irrelevant endpoints for neurologically active compounds, such as mortality, which may underestimate the hazard of psychopharmaceuticals. Due to data limitations, risks could only be assessed for 87 (12%) compounds, with 23 (3.3%) compounds indicating a potential risk, and several highly prescribed drugs returned neither occurrence nor ecotoxicity data. Primary bottlenecks in risk calculation included the lack of ecotoxicity data, a lack of diversity of test species and ecotoxicological end points, and large disparities between well studied and understudied compounds for both occurrence and toxicity data. This study identified which compounds merit concern, as well as the many compounds that lack the data for any calculation of risk, driving research priorities. Despite the large knowledge gaps, we concluded that the presence of a substantial part (26%) of data-rich psychopharmaceuticals in surface waters present an ecological risk for aquatic non-target organisms.

Toxicity Assessment and Treatment Options of Diclofenac and Triclosan Dissolved in Water

The presence of pharmaceutical and personal care products in water is increasing tremendously nowadays. Typical representatives are diclofenac (DCF) and triclosan (TCS). Acute toxicity of these substances was experimentally assessed using the freshwater algae Raphidocelis subcapitata (living, immobilized). The IC50 achieved for R. subcapitata was 177.7–189.1 mg·L−1 for DCF and 5.4–17.2 µg·L−1 for TCS, whereas, regarding DCF, the results corresponded to the values observed by other authors. Concerning TCS, the results were lower than predicted and indicated TCSs’ higher toxicity. The immobilized R. subcapitata showed comparable results with its living culture for DCF only. Regarding K2Cr2O7 and TCS, the immobilized alga was more sensitive. The DCF and TCF removal from water was tested by sorption, photocatalytic and photolytic processes. TiO2 was used as a photocatalyst. Norit and SuperSorbon were used as sorbents based on activated charcoal. The DCF decomposition achieved by both photo-processes was very fast. The starting concentration fell below the detection limit in less than one minute, while bioluminescence on Aliivibrio fischeri showed no toxic intermediates formed only in the case of photocatalysis. DCF and TCS removals by sorption were significantly faster on Norit than SuperSorbon, while the bioluminescence inhibition remained insignificant.

Fate and impact of wastewater-borne micropollutants in lettuce and the root-associated bacteria

The reuse of water for agricultural practices becomes progressively more important due to increasing demands for a transition to a circular economy. Treated wastewater can be an alternative option of blue water used for the irrigation of crops but its risks need to be evaluated. This study assesses the uptake and metabolization of pharmaceuticals and personal care products (PPCPs) derived from treated wastewater into lettuce as well as the impact on root-associated bacteria under a realistic and worst-case scenario. Lettuce was grown in a controlled greenhouse and irrigated with water or treated wastewater spiked with and without a mixture of fourteen different PPCPs at 10 μg/L or 100 μg/L. After harvesting the plants, the same soil was reused for a consecutive cultivation campaign to test for the accumulation of PPCPs. Twelve out of fourteen spiked PPCPs were detected in lettuce roots, and thirteen in leaves. In roots, highest concentrations were measured for sucralose, sulfamethoxazole and citalopram, while sucralose, acesulfame and carbamazepine were the highest in leaves. Higher PPCP concentrations were found in lettuce roots irrigated with spiked treated wastewater than in those irrigated with spiked water. The absolute bacterial abundance remained stable over both cultivation campaigns and was not affected by any of the treatments (type of irrigation water (water vs. wastewater) nor concentration of PPCPs). However, the irrigation of lettuce with treated wastewater had a significant effect on the microbial α-diversity indices at the end of the second cultivation campaign, and modified the structure and community composition of root-associated bacteria at the end of both campaigns. Five and fourteen bacterial families were shown to be responsible for the observed changes at the end of the first and second cultivation campaign, respectively. Relative abundance of Haliangium and the clade Allorhizobium-Neorhizobium-Pararhizobium-Rhizobium was significantly affected in response to PCPPs exposure. Caulobacter, Cellvibrio, Hydrogenophaga and Rhizobacter were significantly affected in microcosms irrigated with wastewater.

Long-term stability of diclofenac and 4-hydroxydiclofenac in the seawater and sediment microenvironments: Evaluation of biotic and abiotic factors

Studies in recent years have shown that significant amounts of diclofenac (DCF) and its metabolites are present in marine coastal waters. Their continuous flow into the environment may be associated with numerous negative effects on both fauna and flora. Although more and more is known about the effects of pharmaceuticals on marine ecosystems, there are still many issues that have not received enough attention, but are essential for risk assessment, such as long term stability. Furthermore, interaction of pharmaceuticals with sediments, which are inhabited by rich microbial, meiofaunal and macrobenthic communities need investigation. Therefore, we undertook an analysis of the stability of DCF and its metabolite, 4-hydroxy diclofenac, in seawater and sediment collected from the brackish environment of Puck Bay. Our 29-day experiment was designed to gain a better understanding of the fate of these compounds under experimental conditions same as near the seafloor. Diclofenac concentration decreased by 31.5% and 20.4% in the tanks with sediment and autoclaved sediment, respectively during 29-day long experiment. In contrast, the concentration of 4-OH diclofenac decreased by 76.5% and 90.2% in sediment and autoclaved sediment, respectively. The concentration decrease of both compounds in the sediment tanks resulted from their sorption in the sediment and biodegradation. Obtained results show that marine sediments favour DCF and 4-OH DCF removal from the water column.

Impact of various aeration strategies on the removal of micropollutants and biological effects in aerated horizontal flow treatment wetlands

Two aerated horizontal subsurface flow treatment wetlands were studied over two years for the removal efficacy with respect of conventional wastewater parameters, micropollutants and effect-based methods. One wetland served as control and was aerated 24 h d^-1 across 100% of the fractional length of the system. The second aerated horizontal flow treatment wetland was investigated under several aeration modes: first year with a zone of 85% aeration, followed by five months with a zone of 50% aeration and six months with a zone of 35% aeration. With 85% aeration, no significant difference in the removal efficacy as compared to the fully aerated control could be observed, except for E. coli, which were removed four times better in the control. No significant difference in removal efficacy for Total Organic Carbon, 5-day Carbonaceous Biochemical Oxygen Demand, caffeine, and naproxen were observed. A 50% non-aerated zone reduced the overall removal efficacy of biological effects. The highest removal efficacy for the moderately biodegradable micropollutants benzotriazole and diclofenac was observed in the system with 50% aeration. This could be due to the sharp increase of dissolved oxygen (DO) and oxidation reduction potential at the passage from the non-aerated to the aerated zone (at 75% of the fractional length). The internal concentration profiles of caffeine, ibuprofen and naproxen varied from 12.5%, 25%, 50% to 75% fractional length due to redox shift, DO variations and other conditions. A reduction of the aerated zone to 35% of the fractional length results in reduced treatment efficacy for benzotriazole, diclofenac, acesulfame and biological effects but 50% aeration yielded as much degradation as the fully aerated control. These results indicate that less aeration could provide similar effluent water quality, depending on the pollutants of interest. E. coli and biological effects were removed best in the fully aerated system.

Sustainable Treatment Techniques for Emerging Pollutants—The Case of Personal Hygiene Products

Personal care products (PCPs) enter wastewater primarily through greywater. Treatment plants have not been able to remove this type of contaminant, although PCP abatement techniques have been developed in recent years. The objective of the current study has been to encounter the sustainable technique that keeps the optimal balance between the criteria considered in the comparison. Therefore, a bibliographic review was conducted in scientific databases of the last eight years, demonstrating that co-composting, anaerobic–aerobic sequencing bioreactors and contaminant absorption through the use of carbon nanotubes are the ones with the least environmental impact. Subsequently, the Saaty and Modified Saaty methods were applied, with a comparative criteria of construction costs, maintenance costs, efficiency and the stage of development. The results indicated that the co-composting technique is the best sustainable technique of those studied, with a score of 0.86/1, which means that the criteria analyzed maintain very close values between them. The co-composting technique yields a low environmental impact in eliminating personal care products. This research work constitutes a practical and easy-to-use tool for decision makers, since it allows finding an optimal elimination treatment for PCPs.

Source, fate, transport and modelling of selected emerging contaminants in the aquatic environment: Current status and future perspectives

The occurrence of emerging contaminants (ECs), such as pharmaceuticals and personal care products (PPCPs), perfluoroalkyl and polyfluoroalkyl substances (PFASs) and endocrine-disrupting chemicals (EDCs) in aquatic environments represent a major threat to water resources due to their potential risks to the ecosystem and humans even at trace levels. Mathematical modelling can be a useful tool as a comprehensive approach to study their fate and transport in natural waters. However, modelling studies of the occurrence, fate and transport of ECs in aquatic environments have generally received far less attention than the more widespread field and laboratory studies. In this study, we reviewed the current status of modelling ECs based on selected representative ECs, including their sources, fate and various mechanisms as well as their interactions with the surrounding environments in aquatic ecosystems, and explore future development and perspectives in this area. Most importantly, the principles, mathematical derivations, ongoing development and applications of various ECs models in different geographical regions are critically reviewed and discussed. The recommendations for improving data quality, monitoring planning, model development and applications were also suggested. The outcomes of this review can lay down a future framework in developing a comprehensive ECs modelling approach to help researchers and policymakers effectively manage water resources impacted by rising levels of ECs.

Emerging pharma residue contaminants: Occurrence, monitoring, risk and fate assessment - A challenge to water resource management

Water is one of the important gifts to mankind. In recent days the accessibility of pharmaceuticals in the environment is progressively a worldwide concern. The significant wellspring of these contaminations in water assets is drugs for human use or veterinary medications. Intermediates, active metabolites and raw materials present in water from pharmaceutical industry waste because of incomplete sewage treatment systems. Various pharmaceutical components such as analgesic/antipyretics such as Ibuprofen (57.9-104 ng/L), Diclofenac (17-129 ng/L), antibiotics such as Sulfamethoxazole (28.7-124.5 ng/L), Sulfamethazine (29.2-83.9 ng/L), Azithromycin (10-68 ng/L), psychiatric drug such as Carbamazepine (9.3-92.4 ng/L), stimulants such as caffeine greater than 55 ng/L, antidepressants, antihypertensive, contraceptives etc., are present in water resources and have been detected in mg/L to μg/L range. The synergic effects and ecotoxicological hazard assessment must be developed. Studies demonstrate that these drugs might cause morphological, metabolic and sex alterations on sea-going species, and interruption of biodegradation activities. Hazard analysis and assessments are in progress. However, the conventional effluent treatment methods are not sufficient to remove API (active pharmaceutical ingredients) from this water effectively. There is necessitate for continuous monitoring of the pharmaceutical compounds in aquatic ecosystem to save the environment and living form of lives from health hazards. This work highlights the hazards, environmental assessment and the mitigation measures of pharmaceutical pollutants.

Biochemical Marker Assessment of Chronic Carbamazepine Exposure at Environmentally Relevant Concentrations in Juvenile Common Carp (Cyprinus carpio)

Worldwide, the anticonvulsant drug carbamazepine (CBZ) is the most frequently identified pharmaceutical residue detected in rivers. Reported chronic effects of CBZ in non-target freshwater organisms, particularly fish, include oxidative stress and damage to liver tissues. Studies on CBZ effects in fish are mostly limited to zebrafish and rainbow trout studies. Furthermore, there are only a few chronic CBZ studies using near environmental concentrations. In this study, we provide data on subacute effects of CBZ exposure (28 days) to common carp (Cyprinus carpio), employing a set of biochemical markers of damage and exposure. CBZ was found to induce a significant change in the hepatic antioxidant status of fish subjected to 5 µg/L. Moreover, with increasing concentrations, enzymatic and non-enzymatic biomarkers of oxidative defence (catalase (CAT), superoxide dismutase (SOD), glutathione reductase (GR), DNA strand breaks)), toxicant biotransformation (ethoxyresorufin-o-demethylase (EROD), glutathione-S-transferase (GST)), and organ and tissue damage (lactate dehydrogenase (LDH), cetylcholinesterase (AChE)) were altered. The AChE, LDH, and lipid peroxidation (LPO) results indicate the occurrence of apoptotic process activation and tissue damage after 28 days of exposure to CBZ. These findings suggest significant adverse effects of CBZ exposure to common carp at concentrations often found in surface waters.

Role of Seasons in the Fate of Dissolved Organic Carbon and Nutrients in a Large-Scale Surface Flow Constructed Wetland

The role of seasons in the removal of dissolved organic carbon (DOC), nutrients and in changes in the spectral properties of dissolved organic matter (DOM) in a large-scale surface flow constructed wetland (SF-CW) receiving reclaimed water and composed of three basins with different vegetation patterns was studied. Dissolved nitrogen removal efficiencies within the three basins in summer (>50%) and winter (<30%) were significantly different. SF-CW water is enriched in DOC in spring and summer with average outlet concentrations above 8 mg·L−1. UV-visible indices, such as the specific absorbance at 254 nm or the spectral slope between 275 and 295 nm, did not vary over the seasons; thus, the basins did not change DOM aromaticity and average molecular weight. Synchronous fluorescence spectra showed variations in terms of protein-like and humic-like substances, the latter being more sensitive to photodegradation. A lab-scale photodegradation experiment confirmed that radiation from the sun was responsible for this decrease, showing this process could alter the composition of DOM at full-scale. DOM variations result from a seasonal competition between release by vegetation and photodegradation. These results validate the necessity for long-term monitoring of SF-CWs, and the utility of rapid optical methods to monitor DOC.