Adsorption mechanisms of five bisphenol analogues on PVC microplastics

UV and chemical aging alter the adsorption behavior of microplastics for tetracycline

This study evaluates the "vector" effects of different microplastics (MPs) on coexisting pollutants. The adsorption of tetracycline was studied on biodegradable plastics poly(butylene adipate-co-terephthalate) (PBAT) and non-biodegradable plastics polystyrene (PS), polypropylene (PP), and polyethylene (PE) after UV aging and chemical aging. The physicochemical properties of PBAT changed more obviously after UV radiation and chemical aging comparing to PS, PP and PE. Pores and cracks appear on the surface of aged PBAT. The crystallinity increased from 29.2% to 52.62%. In adsorption experiments, pristine and aged PBAT had strong vector effects on the adsorption of tetracycline than PS, PP and PE. The adsorption capacity of tetracycline on PBAT was increased from 0.7980 mg g^-1 to 1.2669 mg g^-1 after chemical aging. The adsorption mechanism indicated that electrostatic interactions and hydrogen bonds contribute to the adsorption process. In addition, for the adsorption of tetracycline on PS, π-π interaction was the main cause, and the adsorption mechanism was not considerably changed by aging. In conclusion, this study demonstrates that biodegradable plastics have substantial vector effect on coexisting pollutants at the end of their life cycle, this contributes to assessment of the risk from microplastic pollution.

Potential toxicity of bisphenol A to α-chymotrypsin and the corresponding mechanisms of their binding

Bisphenol A (BPA) is an endocrine disruptor widely existing in plastics and resins, which can accumulate in animals and human bodies, posing a potential threat to the physiological and biochemical reactions of human beings or other organisms. α-Chymotrypsin is a kind of proteolytic enzyme existing in humans and animals, which can cause diseases when its activity is excessive. However, there is a lack of research on the mechanism of endocrine disruptors affecting α-chymotrypsin activity. In this study, the interaction between BPA and α-chymotrypsin was proved via multiple spectroscopic approaches, enzyme activity change, isothermal titration calorimetry and molecular docking. Results showed that α-chymotrypsin's polypeptide chains were unfolded, and protein skeletons were loosened with the exposure to BPA. α-Helix content increased and β-sheet content was decreased. The particle size of the BPA-α-chymotrypsin complex became smaller. Fluorescence sensitization may also be explained by a perturbation of the chromophore Trp 141. The thermodynamic parameters of the binding reaction were measured by isothermal titration calorimetry (ITC), which showed that there was hydrophobic interaction between BPA and α-chymotrypsin, which was consistent with the results of molecular docking. Moreover, BPA may stop near the active center of α-chymotrypsin and interact with the key residues His 57 and Ser 195. The above phenomenon explained the result that the activity of α-chymotrypsin increased to 139% when exposed to high dose BPA (40 μM). Taken together, the effects of BPA on the structure and function of α-chymotrypsin were clarified at the molecular level, which made up the gap in the mechanism of BPA on the proteolytic enzyme, and provided a reliable basis for disease avoidance and prevention.

Vertical distribution, accumulation, and characteristics of microplastics in mangrove sediment in China

Mangroves in tropical and subtropical regions worldwide are recognized as important sinks for microplastics (MPs). However, recent studies have focused on surface sediments, and in China, the vertical distribution and characteristics of MPs in mangrove sediments remain poorly understood. In this study, sediment cores of 100 cm depth were collected from six representative mangroves in China to investigate MPs via chronological analysis. Futian had the highest abundance of MPs (0-3123 n/kg), followed by Dongfang, Yunxiao, Zhanjiang, Dongzhaigang and Fangchenggang. The earliest MPs occurring in mangroves were dated back to 1955, and their abundance increased exponentially from bottom to surface sediments. MPs were mainly white in color, fiber-shaped, 1000-5000 μm in size, and of polypropylene/polyethylene polymer types. Furthermore, the MPs in the urban mangrove also showed a higher diversity in color. The results showed that the MP stocks in the urbanized Futian mangrove reached 1828 mg/m³, an order of magnitude higher than in other areas (251 ± 180 mg/m³), contributing to 0.0057 % of the carbon storage of the sediment. The abundance of MPs in mangrove sediments is expected to increase by 2.38-9.54 times by 2030, and therefore deserve further attention.

Large-flake graphene-modified biochar for the removal of bisphenol S from water: rapid oxygen escape mechanism for synthesis and improved adsorption performance

The combined effects of graphene and biochar for enhanced adsorption of organic pollutants have not been demonstrated yet. Therefore, the mechanisms of graphene-modified biochar synthesis and its application to adsorption of contaminants remain unclear. In this study, the effect of flake-size graphene on biochar modification and its bisphenol S (BPS) adsorption performance was explored for the first time. Three sizes of graphene oxide were used as the precursor to prepare graphene/biochar composites using pyrolysis. It was found that the graphene with a small flake size was interspersed in the macropores of biochar, while the biochar was completely or mostly wrapped by the large-sized graphene sheet, which effectively prevented the agglomeration and pore blockage of biochar. Large-flake graphene oxide modified biochar (LGB) showed the highest adsorption capacity towards BPS, exhibiting 2.8 times higher adsorption than pristine biochar. Density functional theory (DFT) calculation suggested that the maximum diffusion barrier of O atoms in graphene coated cellulose (most frequently used biochar representative) could be reduced significantly (∼46%) at pyrolysis temperature of 873 K. Taking the advantage of small amount of graphene and enhanced adsorption performance, LGB could be a promising adsorbent for the removal of certain organic pollutants from wastewater and is conducive for the development of high-valued biochar modification.

New insights into adsorption mechanism of pristine and weathered polyamide microplastics towards hydrophilic organic compounds

The widespread coexistence of hydrophilic organic compounds and microplastics (MPs) in the environment has greatly increased their associated environmental problems. To evaluate the potential carrier effect of oxygen-containing MPs on coexisting pollutants, adsorption behaviors of four hydrophilic organic compounds (benzoic acid, sulfamethoxazole, sulfamerazine and ciprofloxacin) on MPs (pristine and weathered polyamide (PA)) were studied in the aquatic environment. The results showed that the surface morphology, size, oxygen content, molecular structure, surface charge and crystallinity of PA were changed after weathering, and the weathering degree of PA treated with heat-activated potassium persulfate was the highest. The main adsorption mechanisms included hydrogen bonding, hydrophobic interaction, charge-assisted hydrogen bonding, and electrostatic interaction. Hydrogen bonding and hydrophobic interaction contributed to the adsorption, while electrostatic interaction weakened the adsorption under the specific pH conditions. The formation of charge-assisted hydrogen bonding (CAHB) was also verified through pH influence experiments, and this force can overcome the electrostatic repulsion. The high adsorption of KPA (PA weathered by K₂S₂O₈) under alkaline conditions was well explained by the formation of homonuclear CAHB due to the increase of oxygen-containing functional groups compared to the other three PA. Additionally, weathering did not always enhance the adsorption of hydrophilic organic compounds on PA, which was related to the changes in surface charge, crystallinity and hydrophilicity of PA. Overall, the physical and chemical properties (e.g., specific surface area, oxygen content, molecular structure) of PA after weathering and its trend of adsorption were different from other oxygen-free MPs in this study. This work can provide basic data for environmental risk of MPs and contribute to clarify and understand the processes of oxygenated MPs in the aquatic environment.

Removal efficiency and adsorption mechanisms of CeO2 nanoparticles onto granular activated carbon used in drinking water treatment plants

The presence of NPs in drinking water resources raises a global concern on their potential risk for human health, and whether or not drinking water treatment plants are able to effectively remove NPs to prevent their ingestion by humans. In this study, we investigate the efficiency of granular activated carbon (GAC), commonly used in conventional municipal water treatment processes, for the removal of CeO₂ NPs. In ultrapure water, NPs are found to have a good affinity for GAC and results indicate an increase in the adsorption capacity from 0.62 ± 0.10 to 5.05 ± 0.51 mg/g, and removal efficiency from 35 % ± 4 to 54 % ± 5 with increasing NPs concentration. Kinetic studies reveal that intraparticle diffusion is not the only rate controlling step indicating that mass transfer effect is also playing a role. Adsorption mechanisms are mainly controlled by the electrostatic attractions between the positively charged NPs and negatively charged GAC. Although electrostatic conditions in Lake Geneva water are less favorable for NPs adsorption, the adsorption capacity and removal efficiency are higher than in ultrapure water with values raising from 0.41 ± 0.17 to 7.13 ± 1.13 mg/g and 26 % ± 8 to 75 % ± 11, respectively. Furthermore, the external mass transfer process onto GAC surface is more important than for ultrapure water. NPs adsorption mechanism is explained by the presence of divalent cations and natural organic matter (NOM) which promote the formation of CeO₂ NPs-NOM-divalent cation heteroaggregates increasing both adsorption and removal efficiency by cation bridging.

Nanoplastics induce molecular toxicity in earthworm: Integrated multi-omics, morphological, and intestinal microorganism analyses

The toxicity of nanoplastics (NPs) at relatively low concentrations to soil fauna at different organismal levels is poorly understood. We investigated the responses of earthworm (Eisenia fetida) to polystyrene NPs (90-110 nm) contaminated soil at a relatively low concentration (0.02 % w:w) based on multi-omics, morphological, and intestinal microorganism analyses. Results showed that NPs accumulated in earthworms' intestinal tissues. The NPs damaged earthworms' digestive and immune systems based on injuries of the intestinal epithelium and chloragogenous tissues (tissue level) and increased the number of changed genes in the digestive and immune systems (transcriptome level). The NPs reduced gut microorganisms' diversity (Shannon index) and species richness (Chao 1 index). Proteomic, transcriptome, and histopathological analyses showed that earthworms suffered from oxidative and inflammatory stresses. Moreover, NPs influenced the osmoregulatory metabolism of earthworms as NPs damaged intestinal epithelium (tissue level), increased aldosterone-regulated sodium reabsorption (transcriptome level), inositol phosphate metabolism (proteomic level) and 2-hexyl-5-ethyl-furan-3-sulfonic acid, and decreased betaine and myo-inositol concentrations (metabolic level). Transcriptional-metabolic and transcriptional-proteomic analyses revealed that NPs disrupted earthworm carbohydrate and arachidonic acid metabolisms. Our multi-level investigation indicates that NPs at a relatively low concentration induced toxicity to earthworms and suggests that NPs pollution has significant environmental toxicity risks for soil fauna.

Eco-Corona Dictates Mobility of Nanoplastics in Saturated Porous Media: The Critical Role of Preferential Binding of Macromolecules

Nanoplastics are an increasing environmental concern. In aquatic environments, nanoplastics will acquire an eco-corona by interacting with macromolecules (e.g., humic substances and extracellular polymeric substances (EPS)). Here, we show that the properties of the eco-corona and, consequently, its ability to enhance the transport of nanoplastics vary significantly with the surface functionality of nanoplastics and sources of macromolecules. The eco-corona derived from the EPS of Gram-negative Escherichia coli MG1655 enhances the transport of polystyrene (PS) nanospheres in saturated porous media to a much greater extent than the eco-corona derived from soil humic acid and fulvic acid. In comparison, the eco-corona from all three sources significantly enhance the transport of carboxylated PS (HOOC-PS). We show that the eco-corona inhibits the deposition of the two types of nanoplastics to the porous media mainly via steric repulsion. Accordingly, an eco-corona consisting of a higher mass of larger-sized macromolecules is generally more effective in enhancing transport. Notably, HOOC-PS tends to acquire macromolecules of lower hydrophobicity than PS. The more disordered and flexible structures of such macromolecules may result in greater elastic repulsion between the nanoplastics and sand grains and, consequently, greater transport enhancement. The findings of this study highlight the critical role of eco-corona formation in regulating the mobility of nanoplastics, as well as the complexity of this process.

Sorption and desorption of bisphenols on commercial plastics and the effect of UV aging

Plastics gradually degrade in the natural environment from the effect of irradiation, which can change the surface properties of plastics and affect the migration behaviour of pollutants. Up to now, studies on the sorption/desorption behaviour of organic pollutants on aged plastics are still limited. In this study, several types of commercial plastics (polyurethane (PU), polyamide (PA), polyvinyl chloride (PVC), expanded polystyrene (EPS)) were selected to investigate the sorption and release behaviour for four kinds of bisphenols (bisphenol-F, A, B, AP). The results from Raman spectroscopy and scanning electron microscopy (SEM) analysis showed evidence of oxidization and surface cracks of plastics after irradiation. The sorption behaviour for both fresh and aged plastics were dominated by hydrophobicity. In addition, the electrostatic force, H-bonding interaction, and π-π interaction were also the important factors impacting the sorption process. The desorption kinetics behaviour indicates that desorption becomes faster after aging. Hydrophobicity is also an important factor that affects desorption behaviour. This study showed that sorption capacity for most fresh and aged plastics was enhanced by the impact of salinity and dissolved organic matter (DOM). Increased temperature could increase the desorption of bisphenols on both fresh and aged plastics, which illustrated that warm environments would promote more pollutants be released from plastics to water bodies.

Microplastics and co-pollutant with ciprofloxacin affect interactions between free-floating macrophytes

Microplastic and antibiotic contamination are considered an increasing environmental problem in aquatic systems, while little is known about the impact of microplastics and co-pollutant with antibiotics on freshwater vascular plants, particularly the effects of interactions between macrophytes. Here, we performed a mesocosm experiment to evaluate the impact of polyethylene-microplastics and their co-pollutants with ciprofloxacin on the growth and physiological characteristics of Spirodela polyrhiza and Lemna minor and the interactions between these two macrophytes. Our results showed that microplastics alone cannot significantly influence fresh weight and specific leaf area of the two test free-floating macrophytes, but the effects on photosynthetic pigments, malondialdehyde, catalase and soluble sugar contents were species-specific. Ciprofloxacin can significant adverse effects on the growth and physiological traits of the two test macrophytes and microplastic mitigated the toxicity of ciprofloxacin on the two free-floating plants to a certain extent. In addition, our studies showed that microplastics and co-pollutants can influence relative yield and competitiveness of S. polyrhiza and L. minor by directly or indirectly influencing their physiology and growth. Therefore our findings suggest that species-specific sensibility to microplastic and its co-pollutant among free-floating macrophytes may influence macrophyte population dynamics and thereby community structure and ecosystem functioning. And microplastics altered other contaminant behaviours and toxicity, and may directly or indirectly influence macrophytes interactions and community structure. The present study is the first experimental study exploring the effects of microplastics alone and with their co-pollutants on interactions between free-floating macrophytes, which can provide basic theoretical guidance for improving the stability of freshwater ecosystems.

Adsorption of nonylphenol on coastal saline soil: Will microplastics play a great role?

Microplastics widely exist in diverse matrices to become important hosts of pollutants. Little information regarding adsorption of emerging contaminants on coastal saline soils influenced by co-existing microplastics is available. Thus, the adsorption behaviors of nonylphenol (NP) on coastal saline soil influenced by microplastics were discussed. Polyvinyl chloride (PVC, 4.7 mm), polyethylene (4.85 mm), and polypropylene (4.51 mm) with addition dose of 10% were used to discuss the effect of microplastic type on adsorption of NP by coastal saline soil while PVC samples with size of 4.7 mm and 0.11 mm were used to explore the effect of microplastic size on NP adsorption. The NP adsorption capacity of the saline soil containing 10% of PVC (4.7 mm) was twice that of soil without PVC. Smaller-size PVC (0.11 mm) with addition amount of 10% enhanced the NP adsorption capacity of the coastal saline soil by 117% to reach 8.91 μg g^-1. The desorption capacity of NP on saline soil decreased from 40% to 30% of total adsorption capacity with co-existing PVC. Adsorption/desorption kinetics of NP on coastal saline soil with PVC microplastics could be well explained by pseudo second order model while Freundlich model could better fit the isotherm data of NP adsorption/desorption to show possible occurrence of the multiple-layer adsorption. This study will provide new information regarding the environmental behaviors of typical emerging contaminants on coastal saline soil containing microplastics.

Facilitated transport of microplastics and nonylphenol in porous media with variations in physicochemical heterogeneity

Nonylphenol (Noph) has garnered worldwide concern as a typical endocrine disruptor due to its toxicity, estrogenic properties, and widespread contamination. To better elucidate the interaction of Noph with ubiquitously existing microplastics (MPs) and the potential interdependence of their transport behaviors, batch adsorption and column experiments were conducted, paired with mathematical modeling. Compared with sand, MPs and soil colloids show stronger adsorption affinity for Noph due to the formation of hydrogen bonding and the larger numbers of interaction sites that are available on solid surfaces. Limited amount of soil-colloid coating on sand grains significantly influenced transport behaviors and the sensitivity to solution chemistry. These coatings led to a monotonic increase in Noph retention and a nonmonotonic MPs retention in single systems because of the altered physicochemical properties. The mobility of both MPs and Noph was enhanced when they coexisted, resulting from their association, increased electrostatic repulsion, and competition on retention sites. Limited release of MPs and Noph (under reduced ionic strength (IS) and increased pH) indicated strong interactions in irreversible retention. The retention and release of Noph were independent of IS and solution pH. A one-site model with a blocking term and a two-site kinetic model well described the transport of MPs and Noph, respectively. Our findings highlight the essential roles of coexisting MPs and Noph on their transport behaviors, depending on their concentrations, IS, and physicochemical properties of the porous media. The new knowledge from this study refreshes our understanding of the co-transport of MPs and organic contaminants such as Noph in the subsurface.

The weathering process of polyethylene microplastics in the paddy soil system: Does the coexistence of pyrochar or hydrochar matter?

This study is based on a particular test site to simulate the weathering process of microplastics (MPs) in paddy soil. A substantial amount of plastic waste, especially MPs, inevitably accumulates in agricultural soil due to the high consumption and short average use of plastics. Recently, MP pollution has become a global environmental concern. However, insight into the soil weathering process of MPs in paddy soil, particularly in the presence of biochar, is lacking. In this study, the physicochemical properties of polyethylene (PE) MPs were determined through a 24-week weathering system conducted in paddy soil, paddy soil with pyrochar, or hydrochar. Moreover, the sorption of original and weathered PE MPs toward three typical pollutants (cadmium/Cd, bisphenol A/BPA, and dimethyl phthalate/DMP) was investigated. The surface of PE MPs was fractured, 1.1-fold rougher, yellow-colored (11.7 units), and 1.8-fold more oxidized after paddy soil weathering. In addition, the crystallinity, negative charge, and stronger hydrophilicity of weathered PE MPs increased compared to original PE MPs. Weathering in a pyrochar or hydrochar system caused fissures, extensive destruction of amorphous areas, and accelerated chemical or bio-oxidation processes for PE MPs, resulting in a more noticeable change in roughness (1.4-2.2-fold), yellow color (12.7-13.7), crystallinity (1.2-1.5-fold), and oxygen content (2.5-3.6-fold). Weathered PE MPs facilitated the sorption with Cd and BPA, attributed to larger specific surface area, abundant polar functional groups, and increased negatively charged sites. However, sorption of DMP to PE MPs was highly influenced by their hydrophobicity, resulting in decreased hydrophobic partition sorption on weathered PE MPs. Overall, paddy soil weathering affected the properties of PE MPs and enhanced sorption of Cd and BPA but reduced sorption of DMP. The coexistence of biochar exacerbated the paddy soil weathering effect. The insight gained from this study assists in better understanding the weathering process of PE MPs in agricultural soils.

Vector effect of polystyrene film microplastic in enriching Sudan III from natural particles and its burst release into simulated digestive fluid containing fatty acid

Microplastics (MPs) have aroused tremendous attentions because of their ability in accumulating contaminants from adjacent environment. However, their capability of concentrating hydrophobic organic contaminants might be influenced by huge amounts of coexisting natural particles (NaPs). Yet, our knowledge about the relative concentrating capability of MPs versus NaPs is still rare. Herein, the distribution behavior of several hydrophobic pollutants was studied in simplified MPs/NaPs/pollutant/water quaternary systems. We found that 1-(4-(phenylzao)phenyl)azo-2-naphthol (Sudan III) had similar distribution behavior with many hydrophobic pollutants and thus was used as a model pollutant. Polyethylene (PE) film debris derived from disposable plastic wrap was the most efficient microplastic which concentrated tens of times Sudan III than coexisting NaPs including bentonite, kaolin, sawdust, and diatomite. An enrichment coefficient of over 1000 times was observed in the case of PE film debris versus quartz sand. The concentrating capability of PE film MPs was found approximately equal to biochar particles. MPs seem to have limited contribution on the long distance transportation of hydrophobic organic pollutants. However, notably, over 70% of the adsorbed Sudan III could be released back into water within 0.5 h in the presence of 0.5% sodium oleate, which is a common amphipathic matter forming micelles in digestive fluid. Microplastics might play an important vector-like role in increasing the biological accumulation of hydrophobic pollutants via intestine digestive absorption. Due to much bigger quantity of NaPs, the relative concentrating effect of MPs to hydrophobic organic pollutants over NaPs is possibly a more reasonable reference when considering their potential ecological risk.

Can aged microplastics be transport vectors for organic micropollutants? - Sorption and phytotoxicity tests

Microplastics have been investigated over the last decade as potential transport vectors for other pollutants. However, the specific role of plastic aging, in which plastics change their characteristics over time when exposed to environmental agents, has been overlooked. Therefore, sorption experiments were herein conducted using virgin and aged (by ozone treatment or rooftop weathering) microplastic particles of LDPE - low-density polyethylene, PET - poly(ethylene terephthalate), or uPVC - unplasticized poly(vinyl chloride). The organic micropollutants (OMPs) selected as sorbates comprise a diversified group of priority substances and contaminants of emerging concern, including pharmaceutical substances (florfenicol, trimethoprim, diclofenac, tramadol, citalopram, venlafaxine) and pesticides (alachlor, clofibric acid, diuron, pentachlorophenol), analyzed at trace concentrations (each ≤100 μg L^-1). Sorption kinetics and equilibrium isotherms were obtained, as well as the confirmation that the aging degree of microplastics plays a major role in their sorption capacities. The results show an increased sorption of several OMPs on aged microplastics when compared to pristine samples, i.e. the sorption capacity increasing from one or two sorbed substances (maximum 3 μg g^-1 per sorbate) up to nine after aging (maximum 10 μg g^-1 per sorbate). The extent of sorption depends on the OMP, polymer and the effectiveness of the aging treatment. The modifications (e.g. in the chemical structure) between virgin and aged microplastics were linked to the increased sorption capacity of certain OMPs, allowing to better understand the different affinities observed. Additionally, phytotoxicity tests were performed to evaluate the mobility of the OMPs sorbed on the microplastics and the potential effects (on germination and early growth) of the combo on two species of plants (Lepidium sativum and Sinapis alba). These tests suggest low or no phytotoxicity effect under the conditions tested but indicate a need for further research on the behavior of microplastics on soil-plant systems.

Adsorption kinetics of 20 glucocorticoids at environmentally relevant concentrations in wastewater by powdered activated carbons and development of surrogate models

Glucocorticoids (GCs) are widely used in the treatment of the coronavirus disease of 2019 (COVID-19), and the toxicity of GCs to aquatic organisms has aroused widespread concern. Powdered activated carbon (PAC) has proven effective in removing various trace organic pollutants. In this study, the adsorption behaviors of 20 typical GCs onto PACs were investigated at environmentally relevant concentrations (ng/L) in real wastewater, using four commercially available PACs (HDB, WPH, 20BF, PWA). The results showed that PAC adsorption was feasible for GC removal at ng/L concentrations. After adsorption for 60 min, the GC removal efficiencies obtained by HDB, WPH, 20BF, and PWA were 90-98 %, 89-97 %, 84-96 %, and 71-90 %, respectively. The adsorption processes of 20 GCs on PACs were well fitted by the pseudo-second-order kinetics model (with R ² >0.98). Among the four PACs, HDB achieved the highest rates because of the electrostatic attraction between HDB (positively charged) and the complex of GCs and natural organic matter (GC-NOM, negatively charged). Among the 20 GCs, compounds with substitutions of halogen atoms or five-membered rings at C-17 achieved higher adsorption rates because of the enhanced formation of hydrogen bonds and a resulting increase in electron density. In addition, surrogate models with total fluorescence (TF) and ultraviolet absorbance at 254 nm (UV₂₅₄) were developed to monitor the attenuation trend of GCs during adsorption processes. Compared with the UV₂₅₄ model, the TF model showed better sensitivity to GC monitoring, which could greatly simplify the water quality monitoring process and facilitate online monitoring of GCs in water.

Nano/microplastics: Fragmentation, interaction with co-existing pollutants and their removal from wastewater using membrane processes

NANO: and microplastic (NP/MP) is one of the most challenging types of micropollutants, coming from either direct release or degradation of plastic items into ecosystems. NP/MP can adsorb hazardous pollutants (such as heavy metals and pharmaceutical compounds) and pathogens onto their surface that are consumed by humans, animals, and aquatic living organisms. This paper presents the interaction of NP/MP with other pollutants in the water environment and mechanisms involved to enable the ultimate fate of NP/MP as well as the effectiveness of metal-organic frame (MOF)-based membrane over conventional membrane processes for NP/MP removal. It is found that conventional membranes could remove MPs when their size is usually more than 1000 nm, but they are ineffective in removing NPs. These NPs have potentially greater health impacts due to their greater surface area. MOF-based membrane could effectively remove both NP and MP due to its large porous structure, high adsorption capacity, and low density. This paper also discusses some challenges associated with MOF-based membranes for NP/MP removal. Finally, we conclude a specific MOF-based ultrafiltration membrane (ED-MIL-101 (Cr)) that can potentially remove both negative and positive charged NP/MP from wastewater by electrostatic attraction and repulsion force with efficient water permeability.

Identification of the aged microplastics film and its sorption of antibiotics and bactericides in aqueous and soil compartments

Here, thin-film microplastics (MPs) from black garbage bags were simulated aged by artificially ultraviolet radiation, and their sorption behavior toward antibiotics and bactericides in water and soil was explored. The chemical structure, surface functional groups, and the aged degree indicators of the identified polyethylene microplastics (PE-MPs) were studied by FT-IR spectra. The decreased crystallinity and hydrophobicity of PE-MPs-16 demonstrated by XRD and contact angle measurements and enhanced carbonyl index (0.0105) were highly related to the enhanced sorption capacities, especially for crystal violet (18.10 mg/g) in water. Moreover, PE-MPs-16 mitigated the adsorption rate and had little influence on the sorption capacity in soil. The sorption data fitted well to Henry (water) or Freundlich (soil) isotherm model, indicating the hydrophobic partition was involved in the sorption. Our research helps to clarify the interaction between MPs and organic pollutants and better understand the fate of virgin and aged PE-MPs in the varied compartments.

Recent advances on the effects of microplastics on elements cycling in the environment

Microplastics (<5 mm) are an emerging pollutant which have received increasing concern in recent years. Microplastics pose a serious hazard and potential risk to the environment due to their migration, transformation, adsorption and degradation properties. The effects of different types of microplastics on the elemental cycles (carbon, nitrogen and phosphorus cycles) in ecosystems were comprehensively summarized. The impacts of microplastics on the element cycle occur mainly in the soil environment and to less extent in other environments. Microplastics affect carbon sources, carbon dioxide (CO₂) emissions, and carbon conversion processes, mainly by affecting plant and animal activities, changing gene abundance, enzyme activity, and microbial community composition. Microplastics can affect nitrogen sources, nitrogen fixation, ammonification, nitrification and denitrification processes by changing gene abundance, enzyme activity and microbial community composition. Microplastics can also influence phosphorus content and phosphorus conversion processes by stimulating enzyme activity and changing the composition of microbial communities. Future research needs to analyze the coupling of multiple microplastics and influencing factors on elemental cycling processes. This work provides a better view of the impacts of microplastics on element cycles and the interaction between microplastics and organisms.

Bisphenol S degradation in soil and the dynamics of microbial community associated with degradation

Bisphenol S (BPS) has been widely applied as a replacement for BPA in industrial application, leading to the frequent detection in the environment. However, its impact on soil microbial communities has not been well reported. Here, effects of BPS exposure on soil microbial communities in the presence of polystyrene (PS) microplastics were revealed. Rapid degradation of BPS occurred with a degradation rate of up to 98.9 ± 0.001 % at 32 d. The presence of BPS reduced the diversity of soil microbial communities, and changed community structures. After BPS treatment, Proteobacteria, and its members Methylobacillus, Rhodobacteraceae and Mesorhizobium became dominant, and were considered as potential biomarkers indicating BPS contamination. Co-occurrence network analysis revealed the increased relationships of certain groups of microbes after BPS treatment. The resultant low stability and resilience towards environment disturbance of microbial community networks implied the biotoxicity of BPS towards soil ecosystems. The degradation and biotoxicity of BPS (p > 0.05) in soil was not affected by the presence of PS. Our findings showed that exposure to BPS could reshape soil microbial communities and impair the robustness of microbial co-occurrence networks.

Preliminary Study on the Distribution, Source, and Ecological Risk of Typical Microplastics in Karst Groundwater in Guizhou Province, China

Karst groundwater is one of the important drinking water sources in karst areas, and it has an important role in maintaining the regional ecosystem and human health. The study of microplastics (MPs) in karst groundwater has rarely been reported, and the occurrence and migration behavior of MPs under the unique environmental conditions of karst is unclear. This study selected cave groundwater and common MPs in karst areas to explore the occurrence characteristics of MPs in groundwater to clarify the factors affecting the distribution and migration of MPs. The results showed that the abundance of MPs in karst groundwater was between 2.33 and 9.50 items·L-1, with an average abundance of 4.50 items·L-1. The microplastic size, type, color, and chemical composition were primarily 1~5 mm, film and fiber, color and transparent, and PS and PE, respectively. The risk characterization ratio (RCR) index results indicated that 80% of the samples were at a low ecological risk level, whereas 60% of the sampling points after concentrated rainfall in June were a medium ecological risk. The study showed that rainfall events significantly changed the abundance and migration of MPs in karst groundwater. The Pearson analysis showed a positive correlation between microplastic distribution and suspended particles (SP), total organic carbon (TOC), and water velocity (WV) in water. The study indicated that strong soil erosion in karst areas may also be one of the main sources of MPs in karst groundwater, and that karst groundwater microplastic pollution is an environmental problem that should not be ignored.

Sorption of selected pharmaceutical compounds on polyethylene microplastics: Roles of pH, aging, and competitive sorption

Microplastics (MPs) as the carrier of pharmaceuticals in aquatic environments have been concerned in recent years. However, the influences of environmental factors on the sorption of pharmaceuticals onto MPs, particularly the effect of the simultaneous sorption by MPs of different pharmaceuticals in multi-solute systems are still unclear. This study investigated the influences of pH, aging of MPs, and competition of pharmaceuticals on the sorptions of sulfamethoxazole (SMX), propranolol (PRP), and sertraline (SER) onto polyethylene MPs. In the 96 h pH-dependent experiments, the sorptions of the three pharmaceuticals were mainly driven by hydrophobic interaction. Besides, the ionization states of the three pharmaceuticals varied with the pH ranging from 2.00 to 12.00, and electrostatic interaction would affect the sorption affinities of the pharmaceuticals in different ionization states. In the aged MPs experiments, the MPs aged by UV irradiation showed a stronger sorption capacity than the pristine ones. Across the MPs under different UV irradiation durations, the 6 d aged MPs showed the highest sorption percentages of 23.0% and 17.6% for SER and PRP, respectively; for SMX, the highest sorption percentage of 5.4% was recorded with the 10 d aged MPs. In the multi-solute systems, the sorption kinetics of the three pharmaceuticals fit well with the pseudo-second-order model. The sorption quantities of the three pharmaceuticals onto MPs followed the order of SER cations (18.70 μg g^-1) > SMX anions (7.83 μg g^-1) > PRP cations (3.80 μg g^-1) at pH 7.00. The good fitting of the Freundlich model suggested a multilayer sorption of the three pharmaceuticals onto MPs. The SER with higher hydrophobicity would preferentially be adsorbed onto MPs and influenced the subsequently sorption processes of the other pharmaceuticals via electrostatic interactions. This may change the environmental fate of the contaminants, which should be carefully considered in future work.

Phytotoxicity and accumulation of BPS to Pistia stratiotes under the influence of microplastics

Bisphenol S (BPS) is a contaminant of emerging concern, its exposure and phytotoxicity towards plants, however, is scarce. This study aimed at revealing the BPS translocation in plants and phytotoxicity in the presence of Polystyrene (PS) microplastics. Results found that BPS and PS showed no effect on plant growth, indicating the tolerance of plants towards BPS and PS co-contamination. In addition, plants enriched BPS from soil, and a major part of absorbed BPS was accumulated in roots, as supported by the higher BCF value in roots compared with leaves. Besides, the low TF (<1) suggested the capacity of plants to accumulate BPS in roots, and less translocation to leaves. PS negatively affected the translocation of BPS in plants. PS with large size (5 μm) also increased the distribution of BPS in organelles. Exposure risk assessment suggested low concern of BPS carried in plants to human health. This study underlines the bioaccumulation of BPS in plants, and the effects of PS in the translocation process.

Adsorption mechanism of trace heavy metals on microplastics and simulating their effect on microalgae in river

Microplastics (MPs) and heavy-metal contamination in freshwater is an increasing concern. Fe, Mn, Pb, Zn, Cr, and Cd are common heavy metals that can easily flow into rivers causing water pollution. Microplastics act as carriers for heavy metals and increase the transport of contaminants in freshwater systems. We investigated the adsorption mechanisms of three kinds of MPs having similar particle sizes, namely polypropylene (PP), polystyrene (PS), and polyvinyl chloride (PVC), with respect to trace heavy metals of Pb, Cu, Cr, and Cd under different temperature and salinity conditions. The reaction kinetics of the adsorption of different trace heavy metals on different MPs were consistent with both the quasi primary and quasi secondary kinetic models, indicating the complexity of heavy metal adsorption by MPs. The adsorption rate of heavy metal on MPs was mainly controlled by intra-particle diffusion, and the isotherm model indicated that the adsorption of Pb, Cu, Cr, and Cd by MPs occurred in the form of monolayer physical adsorption. Additionally, an increase in temperature and decrease in salinity were favourable to improve the affinity of MPs toward heavy metals (through adsorption). Zeta potential measurements and Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) analyses indicated that electrostatic force interaction was the main mechanism of the adsorption process; oxygen-containing functional groups, π-π interaction, and halogen bonds played important roles in the process of adsorption. Furthermore, the growth inhibition and oxidative stress of microalgae Chlorella vulgaris (GY-D27) due to PP, PS, and PVC were analysed; notably, MPs or Pb inhibited the growth of Chlorella vulgaris. However, the reduced toxicity to Chlorella vulgaris, with respect to a mixture of Pb and MPs, was confirmed using superoxide dismutase and catalase enzyme activities. Our results can be applied for the risk assessment of heavy metals and MPs in aquatic environments.

Microplastics mulch film affects the environmental behavior of adsorption and degradation of pesticide residues in soil

Plastic pollution in the soil ecosystem is currently receiving worldwide attention. However, little is known whether the presence of microplastics (MPs) in soil will affect the environmental behavior of pesticide residues in soil. Here, the effect of the addition of new mulch MPs (New-MPs), aged mulch MPs (Aged-MPs) and biodegradable mulch MPs (BioD-MPs) on the adsorption and degradation behaviors of two pesticides (imidacloprid and flumioxazin) in soil was investigated. Three MPs slowed down rapid adsorption stage of pesticides in soil and delayed the time to reach adsorption equilibrium. Adsorption rates: Soil > Soil + New-MPs > Soil + Aged-MPs > Soil + BioD-MPs. Three MPs enhanced the adsorption strength of the soil system for the two pesticides, and the aging treatment of the MPs enhanced this effect. Three MPs affected the degradation process of the two pesticides. New-MPs promoted the degradation of two pesticides imidacloprid and flumioxazin, and the degradation half-lives were shortened to 0.93 and 0.85 times, respectively; while Aged-Mps and BioD-MPs delayed the degradation process of two pesticides, and the degradation half-lives were extended to 1.64 times and 1.21 times, respectively. The effect was more significant with the increase of MPs and pesticides concentration. Pesticide polarity, surface structure and functional groups of MPs are potentially important reasons for the differences in adsorption and degradation of MPs-soil systems. Our findings provide a deep insight into understanding the mechanism of interaction between MPs and pesticide residues in soil environment.

Effects of plastic particles on aquatic invertebrates and fish - A review

This review summarises the current knowledge on the effects of microplastics and their additives on organisms living in the aquatic environment, particularly invertebrates and fish. To date, microplastics have been recognised to affect not only the behaviour of aquatic animals but also their proper development, causing variations in fertility, oxidative stress, inflammations and immunotoxicity, neurotoxicity, and changes in metabolic pathways and gene expression. The ability of microplastics to bind other xenobiotics and cause combined toxicity along side the effect of other agents is also discussed as well. Microplastics are highly recalcitrant materials in both freshwater and marine environments and should be considered extremely toxic to aquatic ecosystems. They are severely problematic from ecological, economic and toxicological standpoints.

Catalytic removal of attached tetrabromobisphenol A from microplastic surface by biochar activating oxidation and its impact on potential of disinfection by-products formation

There are numerous studies concerning the impacts of widespread microplastic pollution on the ecological environment, and it shows synergistic effect of microplastics and co-exposed pollutants in risk enhancement. However, the control methods for removing harmful pollutants from microplastic surface to reduce their ecological toxicity has rarely been explored. In this paper, magnetic graphitized biochar as a catalyst is shown to achieve 97% removal of tetrabromobisphenol A (TBBPA) from microplastics by biochar mediated electron transfer. The changes in the surface and structure of microplastics caused by various aging processes affected the pollutant attachment and subsequent removal efficiency. After chlorination, the highest disinfection by-product (DBP) generation potential was observed by the group of microplastics attached with TBBPA. The oxidation system of biochar activating peroxodisulfate (PDS) can not only reduce the kinds of DBPs, but also greatly reduce the total amount of detected DBPs by 76%, as well as reducing the overall toxicity. This paper highlights an overlooked contribution of pollutant attachment to the potential risks of DBP generated from natural microplastics during chlorination process, and provides the underlying insights to guide the design of a biochar-based catalyst from wastes to achieve the removal of TBBPA from microplastics and reduce the risks and hazards of co-contamination.

Stable magnetic CoZn/N-doped polyhedron with self-generating carbon nanotubes for highly efficient removal of bisphenols from complex wastewaters

Bisphenols have extensively been found in various environmental matrices and caused public concerns due to their endocrine-disrupting potential. Herein, we developed a ZIF-67@ZIF-8-derived CoZn/nitrogen-doped carbon (CoZn/NC) as a robust adsorbent for bisphenols in wastewaters. The self-generating carbon nanotubes and the open metal sites provided sufficient adsorption sites. The Co component endowed the derivative with strong magnetism facilitating its separation from water. CoZn/NC exhibited exceeding water stability in pH 3 - 12 solution and withstood water up to 15 days. The great applicability of CoZn/NC was validated with 16 real wastewaters from different sources (recoveries exceeding 97.9%). Fast adsorption kinetics were observed with removal efficiencies above 96.5% within 1 min. The adsorption isotherms were well fitted with the Langmuir model, with adsorption capacities of 222, 200, 193, and 321 mg g^-1 for bisphenol A, bisphenol F, bisphenol S, and bisphenol AF, respectively. Variations in external conditions, including pH 3 - 9, humic acid (50 mg L^-1), and NaCl (0.1 mol L^-1), had negligible impacts on the adsorption process. The characterizations and density functional theory computation demonstrated that electrostatic, hydrophobic, π - π, and cation- π interactions are the driving forces in this system. The as-prepared CoZn/NC exhibits great promise in real wastewater treatment.

The effect of adsorption on the fate of colloidal polystyrene microplastics in drinking water distribution system pipe scales

With microplastics (MPs) being continuously found in various environments, the pollution of water supply systems by MPs is receiving increasing attention. As the sediment in drinking water distribution systems (DWDSs), pipe scales act as the interface for complex reactions between bulk water and pipe surfaces. Consequently, the fate of MPs in pipe scales requires exploration, especially colloidal MPs. In this study, MPs were detected in different pipe scale layers, with concentrations of 0.32-3.10 items g^-1. Subsequently, the adsorption interaction mechanisms between pipe scales and colloidal polystyrene microplastics (PSMPs) were investigated through batch adsorption experiments. The findings indicated that pipe scales showed a potential adsorption capacity for PSMPs. The adsorption kinetics and isotherms results demonstrated that the PSMP adsorption process was physically dominant and complicated. van der Waals and electrostatic interactions, hydrogen bonding, and pore filling were the main adsorption mechanisms. These results verify that colloidal MPs can be adsorbed by pipe scales, demonstrating that pipe scales play an essential role in the fate of colloidal MPs in DWDSs and the quality and security of drinking water. The secondary release of MPs from pipe scales is also worthy of attention due to the environmental and health risks.

Trojan horse in the intestine: A review on the biotoxicity of microplastics combined environmental contaminants

With the reported ability of microplastics (MPs) to act as "Trojan horses" carrying other environmental contaminants, the focus of researches has shifted from their ubiquitous occurrence to interactive toxicity. In this review, we provided the latest knowledge on the processes and mechanisms of interaction between MPs and co-contaminants (heavy metals, persistent organic pollutants, pathogens, nanomaterials and other contaminants) and discussed the influencing factors (environmental conditions and characteristics of polymer and contaminants) that affect the adsorption/desorption process. In addition, the bio-toxicological outcomes of mixtures are elaborated based on the damaging effects on the intestinal barrier. Our review showed that the interaction processes and toxicological outcomes of mixture are complex and variable, and the intestinal barrier should receive more attention as the first line of defensing against MPs and environmental contaminants invasion. Moreover, we pointed out several knowledge gaps in this new research area and suggested directions for future studies in order to understand the multiple factors involved, such as epidemiological assessment, nanoplastics, mechanisms for toxic alteration and the fate of mixtures after desorption.

The adsorption mechanisms of oriental plane tree biochar toward bisphenol S: A combined thermodynamic evidence, spectroscopic analysis and theoretical calculations

Garden pruning waste is becoming a problem that intensifies the garbage siege. It is of great significance to purify polluted water using biochar prepared from garden pruning waste. Herein, the interaction mechanism between BPS and oriental plane tree biochar (TBC) with different surface functional groups was investigated by adsorption experiments, spectroscopic analysis and theoretical calculations. Adsorption kinetics and isotherm of BPS on TBC can be satisfactorily fitted into pseudo-second-order kinetic and Langmuir models, respectively. A rapid adsorption kinetic toward BPS was achieved by TBC in 15 min. As compared with TBC prepared at low temperature (300 °C) (LTBC), the maximum adsorption capacity of TBC prepared at high temperature (600 °C) (HTBC) can be significantly improved from 46.7 mg g^-1 to 72.9 mg g^-1. Besides, the microstructure and surface functional groups of HTBC were characterized using SEM, BET-N_2, and XPS analysis. According to density functional theory (DFT) theoretical calculations, the higher adsorption energy of HTBC for BPS was mainly attributed to π-π interaction rather than hydrogen bonding, which was further supported by the analysis of FTIR and Raman spectra as well as the adsorption thermodynamic parameters. These findings suggested that by improving π-π interaction through high pyrolysis temperature, BPS could be removed and adsorbed by biochar with high efficacy, cost-efficiency, easy availability, and carbon-negative in nature, contributing to global carbon neutrality.

Alkaline aging significantly affects Mn(II) adsorption capacity of polypropylene microplastics in water environments: Critical roles of natural organic matter and colloidal particles

Most microplastic particles may undergo various aging in water environments. In this work, surface physicochemical properties were firstly compared among pristine polypropylene (PP-pris) microplastics, and two aged ones obtained after pretreated with HCl (PP-acid) and NaOH (PP-alka). When compared with PP-pris and PP-acid, PP-alka had a much stronger Mn(II) adsorption capacity. The results regarding the role of natural organic matter and colloidal particle concentrations on adsorption demonstrated that for water solutions either containing kaolin or not, humic acid (HA) had significantly negative influence on Mn(II) adsorption capacity of PP-alka due to their complexation and competition effects, and its negative influence became enhanced with increasing kaolin concentrations. Besides, established conceptual models of adsorption were applied to comprehensively explore adsorption mechanisms of PP-alka for Mn(II) in the coexistence of HA and kaolin. An important suggestion was that in complicated adsorption-reactor system, great numbers of microplastics-kaolin heteroaggregates might be formed via ion bridging of Mn(II) and/or polymer bridging of HA. So these formed aggregates were possible to re-organize themselves, under pre-set vibration-speed conditions, for achieving a more stable structure. As a consequence, Mn(II) adsorption behaviors would be affected by changes in steric-hindrance effects of HA molecules and surface charge distribution of resultant heteroaggregates.

Interactions of microplastics with organic, inorganic and bio-pollutants and the ecotoxicological effects on terrestrial and aquatic organisms

As emerging contaminants, microplastics (MPs) have attracted global attention. They are a potential risk to organisms, ecosystems and human health. MPs are characterized by small particle sizes, weak photodegradability, and are good environmental carriers. They can physically adsorb or chemically react with organic, inorganic and bio-pollutants to generate complex binary pollutants or change the environmental behaviors of these pollutants. We systematically reviewed the following aspects of MPs: (i) Adsorption of heavy metals and organic pollutants by MPs and the key environmental factors affecting adsorption behaviors; (ii) Enrichment and release of antibiotic resistance genes (ARGs) on MPs and the effects of MPs on ARG migration in the environment; (iii) Formation of "plastisphere" and interactions between MPs and microorganisms; (iv) Ecotoxicological effects of MPs and their co-exposures with other pollutants. Finally, scientific knowledge gaps and future research areas on MPs are summarized, including standardization of study methodologies, ecological effects and human health risks of MPs and their combination with other pollutants.

Absorption, distribution, metabolism, excretion and toxicity of microplastics in the human body and health implications

Microplastics (MPs; <5 mm) in the biosphere draws public concern about their potential health impacts. Humans are potentially exposed to MPs via ingestion, inhalation, and dermal contact. Ingestion and inhalation are the two major exposure pathways. An adult may consume approximately 5.1 × 10³ items from table salts and up to 4.1 × 10⁴ items via drinking water annually. Meanwhile, MP inhalation intake ranges from 0.9 × 10⁴ to 7.9 × 10⁴ items per year. The intake of MPs would be further distributed in different tissues and organs of humans depending on their sizes. The excretion has been discussed with the possible clearance ways (e.g., urine and feces). The review summarized the absorption, distribution, metabolic toxicity and excretion of MPs together with the attached chemicals. Moreover, the potential implications on humans are also discussed from in vitro and in vivo studies, and connecting the relationship between the physicochemical properties and the potential risks. This review will contribute to a better understanding of MPs as culprits and/or vectors linking to potential human health hazards, which will help outline the promising areas for further revealing the possible toxicity pathways.

Competition adsorption of malachite green and rhodamine B on polyethylene and polyvinyl chloride microplastics in aqueous environment

Microplastics (MPs) will cause compound pollution by combining with organic pollutants in the aqueous environment. It is important for environmental protection to study the adsorption mechanism of different MPs for pollutants. In this study, the adsorption behaviors of malachite green (MG) and rhodamine B (RhB) on polyethylene (PE) and polyvinyl chloride (PVC) were studied in single systems and binary systems, separately. The results show that in single system, the adsorptions of between MPs for pollutants (MG and RhB) are more consistent with the pseudo-second-order kinetics and Freundlich isotherm model, the adsorption capacity of both MPs for MG is greater than that of RhB. The adsorption capacities of MG and RhB were 7.68 mg/g and 2.83 mg/g for PVC, 4.52 mg/g and 1.27 mg/g for PE. In the binary system, there exist competitive adsorption between MG and RhB on MPs. And the adsorption capacities of PVC for the two dyes are stronger than those of PE. This is attributed to the strong halogen-hydrogen bond between the two dyes and PVC, and the larger specific surface area of PVC. This study revealed the interaction and competitive adsorption mechanism between binary dyes and MPs, which is of great significance for understanding the interactions between dyes and MPs in the multi-component systems.

Competitive and cooperative sorption between triclosan and methyl triclosan on microplastics and soil

The sorption behavior of single contaminant on microplastics (MPs) has been extensively studied; however, little is known about that in the more actual scenario containing multiple contaminants. In this study, the interaction between triclosan (TCS) and its primary metabolite, methyl triclosan (MTCS) on polyethylene (PE), polystyrene (PS), and soil was investigated. Results indicate that the more hydrophobic MTCS had much higher sorption capacity and affinity than TCS. Competitive sorption between them occurred in most cases and appeared to be concentration-dependent (in the range of 0.1-5 mg TCS/L and 0.01-≤0.05 mg MTCS/L of primary solutes, respectively): more pronounced at low concentrations of primary solute, while progressively weaker with the increase of concentrations. Among the sorbents, MTCS exhibited strong antagonistic effect on TCS sorption for MPs, especially PS, while significant suppression of MTCS sorption by TCS took place for soil and PS rather than PE. Additionally, it is interesting to observe that the presence of TCS substantially facilitated the sorption of MTCS exclusively at high concentrations on both PS and soil, presumably attributed to the solute-multilayer formation. Furthermore, the magnitude of the two effects varied with solution pH: TCS sorption at alkaline pH was the most suppressed by MTCS because the less hydrophobic dissociated TCS tended to be displaced, and the highest cooperative sorption of MTCS with TCS occurred at acidic pH because neutral TCS preferentially adsorbed on sorbent surface could provide additional sorption sites for MTCS. Both competitive and cooperative effects between multiple contaminants may affect their fate and transport, thereby these findings are helpful for assessing the environmental risk of MPs and TCS in soil.

Effect of polytetrafluoroethylene nanoplastics on combined inhibition of ciprofloxacin and bivalent copper on nitrogen removal, sludge activity and microbial community in sequencing batch reactor

The work aimed to explore effects of polytetrafluoroethylene nanoplastics on joint inhibitions of ciprofloxacin and bivalent copper on the nitrogen removal in a sequencing batch reactor and its potential mechanisms. The addition of bivalent copper and/or ciprofloxacin reduced the ammonia nitrogen elimination rate with or without polytetrafluoroethylene nanoplastics. Adsorption kinetics and thermodynamics showed the binary bivalent copper and ciprofloxacin promoted their adsorptions by polytetrafluoroethylene nanoplastics. Polytetrafluoroethylene nanoplastics enhanced combined toxicities of ciprofloxacin and bivalent copper to sludge activities and microbial community involved into nitrification and denitrification due to the adsorption of ciprofloxacin and bivalent copper by polytetrafluoroethylene nanoplastics. With or without polytetrafluoroethylene nanoplastics, bivalent copper and/or ciprofloxacin caused more obvious level changes of protein than polysaccharide. This study provides novel insights for understanding the effect of combined heavy metals and antibiotics on the performance in a sequencing batch reactor with the nanoplastics stress.

Elimination of microplastics from the aquatic milieu: A dream to achieve

Microplastics (MPs) have become a significant source of concern as they have emerged as a widespread pollutant that harms the aquatic environment. It has become an enormous challenge, having the capacity to biomagnify and eventually affect human health, biodiversity, aquatic animals, and the environment. This review provides in-depth knowledge of how MPs interact with different toxic organic chemicals, antibiotics, and heavy metals in the aquatic environment and its consequences. Membrane technologies like ultrafiltration (UF), nanofiltration (NF), microfiltration (MF), and dynamic membranes can be highly effective techniques for the removal of MPs. Also, hybrid membrane techniques like advanced oxidation processes (AOPs), membrane fouling, electrochemical processes, and adsorption processes can be incorporated for superior efficiency. The review also focuses on the reactor design and performance of several membrane-based filters and bioreactors to develop practical, feasible, and sustainable membrane technologies. The main aim of this work is to throw light on the alarming scenario of microplastic pollution in the aquatic milieu and strategies that can be adopted to tackle it.

Is the presence of Cu(II) and p-benzoquinone a challenge for the removal of microplastics from landfill leachate?

A large number of plastic wastes generated eventually end up in landfills. The leachate from landfills has become a potential destination for microplastics (MPs). Many researchers have turned their attention to the distribution of MPs in landfill leachate. However, rare researchers mentioned that the efficient removal of MPs in landfill leachate was hard to realized. In this work, we analyzed MPs distribution and composition in leachate from a municipal landfill. Subsequently, to understand the causes of hydrophilization of MPs in leachate, we investigated the flotation percentage of polyvinyl chloride (PVC), polyethylene terephthalate (PET), and polystyrene (PS) MPs when exposure to p-benzoquinone and Cu²⁺. We conducted experiments on factors including the concentration of pollutants, pH, and interaction time. Meanwhile, the adsorption kinetics, adsorption isotherms, and synergistic effects of p-benzoquinone and Cu²⁺ were further investigated. The order of the strength of the hydrophilic effect of contaminants on MPs in leachate was p-benzoquinone + Cu²⁺ > p-benzoquinone > Cu²⁺. The physisorption and chemisorption of p-benzoquinone and Cu²⁺ on the MPs surface, respectively, resulted in the hydrophilization of the MPs surface. The order of hydrophilization and the adsorption capacity for pollutants of the three MPs were consistent: PVC > > PET ≈ PS. We proposed a feasible scheme with the oleic acid to restore the hydrophobicity of MPs, which could increase the removal rate of MPs by 87.37 %. This work revealed the hydrophilization effects of pollutants on MPs and proposed a novel insight into the MPs removal from landfill leachate.

Extensive investigation and beyond the removal of micro-polyvinyl chloride by microalgae to promote environmental health

Microplastics (MPs) remediation via algae could be a prospective strategy to address MPs pollution concerns. In this study, Chlorella sp. GEEL-08 was exposed to different gradient concentrations ranging from 0 to 200 mg L^-1 of polyvinyl chloride (PVC_0.2μm). Microalgal growth, total nitrogen (TN), total phosphorus (TP), and cations (Cu, Zn, Na, and K) removal were investigated. The oxidative stress enzymes such as superoxide dismutase (SOD) and malonaldehyde (MDA) were also assessed. The addition of 50 mg L^-1 mPVC resulted in the highest growth along with >99% removal of nutrients (TN and TP) and >80% removal of cations. However, the addition of 100-200 mg L^-1 mPVC inhibited microalgal growth by 8.8-12.3%. The stress-induced by mPVC was highly observed at 200 mg L^-1 mPVC on the 4th d with 70.8 U mg_prot^-1 and 62.3 nmol mg_prot^-1 of SOD and MDA, respectively. Fourier-transform infrared spectroscopy (FTIR) spectra confirmed that microalgal biomass retained mPVC. Thermogravimetric analysis/derivative thermogravimetric analysis (TGA/DTG) spectra showed that the organic matter of microalgal biomass attached with mPVC was decomposed faster than control, indicating the possibilities of using this biomass for pyrolysis and the formation of bio-products.

Microplastics in Flathead Lake, a large oligotrophic mountain lake in the USA

Microplastics are contaminants that are closely associated with human activity and are often abundant even in remote areas. As the largest natural freshwater lake in the western USA, Flathead Lake is a suitable site to study microplastics in lakes in less-populated areas of North America. Our assessment of microplastics in lake surface water samples showed that microplastic densities and concentrations in Flathead Lake were similar to those in other lakes located in less-populated areas around the world, with densities ranging from 8.00 × 10⁴ to 4.22 × 10⁵ particles/km² with a mean concentration of 1.89 × 10⁵ particles/km². Dry deposition rates for microplastics ranged from 4 to 140 particles/m²/day with an average of 69 particles/m²/day and were significantly higher in the fall. Microplastic concentrations in wet deposition ranged from 0.006 particles/mL to 0.050 particles/mL with highest concentrations in winter and lowest in summer. Fibrous microplastics were predominant in both lake water and atmospheric deposition. The high densities of microplastics in the sample sites located near the Flathead River inlet suggests that the river is an important source of microplastics to Flathead Lake. The high densities of microplastics and high proportions of non-fibrous microplastics near populated areas of the lake imply that local human activities also affect microplastics in Flathead Lake. Although the annual flux of microplastics in dry deposition was higher than that in wet deposition, the relatively modest difference suggests that precipitation might enhance the deposition of microplastics. The results of this study indicate that instituting increased control measures that target both reducing the microfibers generated by laundry and improving the overall level of plastic waste management in the watershed may help in controlling microplastic levels in Flathead Lake.

Induced aging, structural change, and adsorption behavior modifications of microplastics by microalgae

The effects of microalgal biofouling on microplastic (MP) may differ from bacterial biofouling. In this study, the influence of microalgae on MP surface alteration, structural change, and adsorption of organic micropollutants was evaluated. Virgin polyethylene (PE), polyvinyl chloride (PVC), and polyamide (PA) were each immersed in algal photobioreactor and river freshwater for 30 days to simulate algal and river microbe biofouling respectively. Consequently, their physicochemical changes and adsorption potential of a mixture of six bisphenol analogues (BPA, BPS, BPE, BPB, BPF, BPAF) and two parabens (propyl-paraben, benzyl-paraben) were investigated. Owing to the algal bioactive compounds, major microalgae-induced biofouling and more MP aging than the river microbe aging were observed through fractures, pits, cracks, and algal attachments. Intrusion of algal organic matter and scission of polymeric functional groups were revealed during microalgal immersion and the potential MP aging pathways were proposed. Algal biofouling considerably altered the intrinsic properties of the MPs, consequently the adsorption capacity of PE and PVC was enhanced by 3.04-6.72 and 2.14-8.72 times, respectively. Adsorption process onto algal-aged MPs was pH-dependent, endothermic, non-spontaneous, and favored by hydrogen bonds. Meanwhile, the amide group in PA structure was conducive to organic micropollutant adsorption, which was likely reduced by algal aging and the erosion of the N-H stretching. Moreover, higher adsorption capacities of organic micropollutants were shown by the algal-biofilm PE and PVC than virgin and river microbial biofilm MPs. This study discloses that, biofouling and aging of MPs by microalgae through their bioactive components would engender more incidences on MP properties, organic micropollutants adsorption with associated environmental and health hazards.

Adsorption of Tannic Acid and Macromolecular Humic/Fulvic Acid onto Polystyrene Microplastics: A Comparison Study

Dissolved organic matter (DOM) has been widely reported to influence the environmental behavior of microplastics (MPs), but little is known about the properties and mechanisms of interaction between specific DOM components and MPs. Here, we studied the adsorption of three representative DOM components (humic acid, HA; fulvic acid, FA; and tannic acid, TA) on polystyrene (PS) MPs in batch adsorption experiments. Results revealed that HA/FA adsorption was greater under acidic conditions, while higher TA adsorption on PS was found at pH 4 and 6. The divalent cation (Ca2+) exerted a more prominent role in enhancing HA, FA, and TA adsorption on PS than did monovalent ones (K+ and Na+). The adsorption process fitted well with the Freundlich isotherm model and the pseudo-second-order kinetics model. The adsorption site heterogeneity was evaluated using the site energy distribution analysis based on the Freundlich model. The greater binding ability of HA on the PS surface caused a more negatively charged surface than FA/TA, as reflected by Zeta potential values. The findings of this study not only provide valuable information about the adsorption behavior and interaction processes of various DOM components on PS MPs, but also aid our efforts to evaluate the environmental behaviors of MPs.

A Novel Analytical Approach to Assessing Sorption of Trace Organic Compounds into Micro- and Nanoplastic Particles

Assessing the sorption of trace organic compounds (TOrCs) into micro- and nanoplastic particles has traditionally been performed using an aqueous phase analysis or solvent extractions from the particle. Using thermal extraction/desorption–gas chromatography/mass spectrometry (TD-Pyr-GC/MS) offers a possibility to analyze the TOrCs directly from the particle without a long sample preparation. In this study, a combination of two analytical methods is demonstrated. First, the aqueous phase is quantified for TOrC concentrations using Gerstel Twister® and TD-GC/MS. Subsequently, the TOrCs on the particles are analyzed. Different polymer types and sizes (polymethyl methacrylate (PMMA), 48 µm; polyethylene (PE), 48 µm; polystyrene (PS), 41 µm; and PS, 78 nm) were analyzed for three selected TOrCs (phenanthrene, triclosan, and α-cypermethrin). The results revealed that, over a period of 48 h, the highest and fastest sorption occurred for PS 78 nm particles. This was confirmed with a theoretical calculation of the particle surface area. It was also shown for the first time that direct quantification of TOrCs from PS 78 nm nanoparticles is possible. Furthermore, in a mixed solute solution, the three selected TOrCs were sorbed onto the particles simultaneously.

A comprehensive review of the polyolefin composites and their properties

Polyolefins are formed by the polymerization of olefin monomer units such as ethylene, styrene, and vinyl chloride. Polyolefins composites are a mixture of polyolefins with different types of other polymers, reinforcements, or fillers. Blending neat polyolefins with composites widens its uses in various applications that require high efficiency in the areas of environmental degradation, impact resistance, fire and chemical resistance, or strength. In this review, the effects of blending neat polyolefin with other types of polymers or wood fibers on the properties of neat polymers have been represented. Moreover, this review reveals the importance of a coupling agent or compatibilizer in the improvement of the polyolefin’s compatibility with the other added components.