Covid-19 face masks: A potential source of microplastic fibers in the environment

The impact of plastic during the COVID-19 pandemic: The point of view of the environmental science literature

COVID-19 is the official name of the disease provoked by a coronavirus called SARS-CoV-2. Since the advent of the first cases of the new coronavirus, our society has been completely changed. Due to the changes, new environmental challenges were imposed, principally due to the considerable growth in using plastic materials in packages and personal protective equipment such as face masks. The impact of plastic during the COVID-19 pandemic was discussed in the present work from the point of view of the environmental science area. Bibliometric analysis and mapping were performed based on Scopus database search results. Emphasis was placed on analyzing the authors' keywords of the publications. The main concern of the research area concerning the use of plastic during the COVID-19 pandemic is the pollution of water bodies by plastic.

COVID-19 face masks attracted Cellulomonas and Acinetobacter bacteria and provided breeding haven for red cotton bug (Dysdercus suturellus) and house cricket (Acheta domesticus)

This study investigated the possibility of COVID-19 medical face masks to affect bacterial and macrofaunal communities in open soil environment. An estimated 1.24 trillion of face masks have been used and discarded as a result of the COVID-19 pandemic, with a significant part of this ending up in the soil environment, where they degrade gradually over time. Because bacteria and macrofauna are sensitive indicators of changes in soil ecosystem, we investigated possible impacts of face masks on population, distribution, and diversity of these soil species. Effect on soil bacterial community was studied by both culture-based and advanced molecular (metagenomics) approach, while impact on macrofauna was investigated by examining monoliths around heap of masks for soil insects. In both cases, control soil experiments without face masks were also set up and monitored over a period of 48 weeks. The study found that the presence of face masks led to a more diverse bacterial community, although no influence on overall bacterial population was evidenced. More importantly, bacteria belonging to the genera Cellulomonas and Acinetobacter were found prominently around face masks and are believed to be involved in biodegradation of the masks. The bacterial community around the masks was dominated by Proteobacteria (29.7-38.7%), but the diversity of species increased gradually with time. Tiny black ants (Monomorium invidium) were attracted to the face masks to take advantage of water retained by the masks during the period of little rainfall. The heaps of face masks also provided shelter and breeding "haven" for soil insects, notably the red cotton bug (Dysdercus suturellus) and house cricket (Acheta domesticus), thereby impacting positively on the population of insect species in the environment. This study provides insights into the actual impacts of face masks on soil organisms under normal outdoor environmental conditions.

Effectiveness of Inexpensive Cloth Facemasks and Their Amendments to Reduce Ambient Particulate Exposures: A Case of Kathmandu, Nepal

Inexpensive cloth masks are widely used to reduce particulate exposures, but their use became ubiquitous after the outbreak of COVID-19. A custom experimental setup (semiactive at 5.1 m/s airflow rate) was fabricated to examine the efficiency of different types of commercial facemasks collected randomly from street vendors. The sample (N = 27) including (n = 16) cloth masks (CMs), (n = 7) surgical masks (SMs), and (n = 4) N95 filtering facepiece respirators (FFRs), of which SMs and N95 FFRs taken as a standard for efficiency comparison were all tested against ambient aerosols (PM_2.5 and PM₁₀ μg/m³). The prototype cloth masks (PTCMs) (N = 5) design was tailored, and their performance was assessed and compared with that of standard commercial masks. The filtering efficiency tested against ambient coarse particulates (PM₁₀) ranged from (5% to 34%) for CMs with an average of 16%, (37% to 46%) for SMs with an average of 42%, (59% to 72%) for PTCMs with an average of 65%, and (70% to 75%) for N95 FFRs with an average of 71%, whereas against fine particulates (PM_2.5), efficacy ranged from (4% to 29%) for CMs with an average of 13%, (34% to 44%) for SMs with an average of 39%, (53% to 68%) for PTCMs with an average of 60%, and (68% to 73%) for N95 FFRs with an average of 70%, respectively. The efficiency followed the order N95 FFRs > PTCMs > SMs > CMs showing poor exposure reduction potential in CMs and high exposure reduction potential in N95 FFRs and PTCMs. Amendment in existing CMs using eco-friendly cotton fabric with better facial adherence can protect human health from exposure to fine particulates <2.5 μm and can reduce the risk of micro-plastic pollution caused by polypropylene (PP) facemasks.

Exposure to Polypropylene Microplastics via Oral Ingestion Induces Colonic Apoptosis and Intestinal Barrier Damage through Oxidative Stress and Inflammation in Mice

Extensive environmental pollution by microplastics has increased the risk of human exposure to plastics. However, the biosafety of polypropylene microplastics (PP-MPs), especially of PP particles < 10 μm, in mammals has not been studied. Thus, here, we explored the mechanism of action and effect of exposure to small and large PP-MPs, via oral ingestion, on the mouse intestinal tract. Male C57BL/6 mice were administered PP suspensions (8 and 70 μm; 0.1, 1.0, and 10 mg/mL) for 28 days. PP-MP treatment resulted in inflammatory pathological damage, ultrastructural changes in intestinal epithelial cells, imbalance of the redox system, and inflammatory reactions in the colon. Additionally, we observed damage to the tight junctions of the colon and decreased intestinal mucus secretion and ion transporter expression. Further, the apoptotic rate of colonic cells significantly increased after PP-MP treatment. The expression of pro-inflammatory and pro-apoptosis proteins significantly increased in colon tissue, while the expression of anti-inflammatory and anti-apoptosis proteins significantly decreased. In summary, this study demonstrates that PP-MPs induce colonic apoptosis and intestinal barrier damage through oxidative stress and activation of the TLR4/NF-κB inflammatory signal pathway in mice, which provides new insights into the toxicity of MPs in mammals.

A Petrochemical-Free Route to Superelastic Hierarchical Cellulose Aerogel

Cellulose aerogels are plagued by intermolecular hydrogen bond-induced structural plasticity, otherwise rely on chemicals modification to extend service life. Here, we demonstrate a petrochemical-free strategy to fabricate superelastic cellulose aerogels by designing hierarchical structures at multi scales. Oriented channels consolidate the whole architecture. Porous walls of dehydrated cellulose derived from thermal etching not only exhibit decreased rigidity and stickiness, but also guide the microscopic deformation and mitigate localized large strain, preventing structural collapse. The aerogels show exceptional stability, including temperature-invariant elasticity, fatigue resistance (∼5 % plastic deformation after 10⁵  cycles), high angular recovery speed (1475.4° s^-1 ), outperforming most cellulose-based aerogels. This benign strategy retains the biosafety of biomass and provides an alternative filter material for health-related applications, such as face masks and air purification.

Face Mask: As a Source or Protector of Human Exposure to Microplastics and Phthalate Plasticizers?

Wearing masks has become the norm during the Coronavirus disease pandemic. Masks can reportedly interface with air pollutants and release microplastics and plastic additives such as phthalates. In this study, an experimental device was set up to simulate the impact of five kinds of masks (activated-carbon, N95, surgical, cotton, and fashion masks) on the risk of humans inhaling microplastics and phthalates during wearing. The residual concentrations of seven major phthalates ranged from 296 to 72,049 ng/g (median: 1242 ng/g), with the lowest and the highest concentrations detected in surgical (median: 367 ng/g) and fashion masks (median: 37,386 ng/g), respectively. During the whole inhalation simulation process, fragmented and 20-100 μm microplastics accounted for the largest, with a rapid release during the first six hours. After one day's wearing, that of 6 h, while wearing different masks, 25-135 and 65-298 microplastics were inhaled indoors and outdoors, respectively. The total estimated daily intake of phthalates with indoor and outdoor conditions by inhalation and skin exposure ranged from 1.2 to 13 and 0.43 to 14 ng/kg bw/d, respectively. Overall, surgical masks yield a protective effect, while cotton and fashion masks increase human exposure to microplastics and phthalates both indoors and outdoors compared to no mask wearing. This study observed possible risks from common facemasks and provided suggestions to consumers for selecting suitable masks to reduce exposure risks from microplastics and phthalate acid.

Environmental impacts of covid-19 pandemic: Release of microplastics, organic contaminants and trace metals from face masks under ambient environmental conditions

The covid-19 pandemic era was characterized by heavy usage and disposal of medical face masks, now estimated at over 1.24 trillion. Few studies had attempted to demonstrate the release of microplastics from face masks using simulated conditions and application of mechanical forces, far different from the effects experienced by face masks dumped in the open environment, in landfills and dumpsites. In the current study, we monitored the release of microplastics, organic contaminants and toxic metals from medical face masks degraded under normal outdoor environmental conditions, over a period of 60 weeks. We showed that face mask's decomposition proceeded via sunlight (UV) - initiated oxidative degradation, leading to the replacement of methylene (CH₂-) and alkyl (CH₃-) groups in face mask's polypropylene backbone with hydroxyl and ketonic functional groups. Organic compounds released from decaying face masks into the surrounding soil included alkanes, alkenes, carboxylic acids/diesters and phthalate esters. Mean maximum concentration of phthalates in the soil ranged from 3.14 mg/kg (diethyl phthalate) to 11.68 mg/kg di(2-ethylhexyl) phthalate. Heavy metals, including Cu, Pb, Cd, As, Sn and Fe, were released into the soil, leading to contamination factors of 3.11, 2.84, 2.42, 2.26, 1.80 and 0.99, respectively. Together, the metals gave a pollution load index (PLI) of 2.102, indicating that they constitute moderate pollution of the soil surrounding the heap of face masks. This study provides a realistic insight into the fate and impacts of the enormous amounts of face masks, disposed or abandoned in soil environments during the covid-19 pandemic.

Distribution, characteristics, and risk assessments analysis of microplastics in shore sediments and surface water of Moheshkhali channel of Bay of Bengal, Bangladesh

Microplastic pollution in various ecosystems has gained significant attention across the globe. Due to ubiquitous abundance, terrestrial and aquatic ecosystems at regional scales are polluted via uncontrolled anthropogenic actions. Therefore, this study investigates microplastic pollution and distribution in sediments and surface water of the Moheshkhali channel of Bangladesh, Bay of Bengal, along with their shape, size, color, and polymeric analysis. It has been observed that both sediments and surface water are significantly contaminated with microplastics at 14 sediments and 12 surface water sampling sites. 291 particles of microplastic were observed in two quadrants, separated 10-m away from each other, across 14 sediment sampling sites, with average concentrations registered in the range of 6.66 to 138.33 particles/m². At the same time, 163 particles were observed across 12 sampling sites in the surface water, ranging from 0 to ~0.1 particles/m³. Various shapes, like films, fragments, fiber/lines, foams, and pellets (resins), were observed extensively in the Moheshkhali channel. Besides, various risk assessments, like contamination factors, polymeric risk assessment, pollution risk index, and pollution load index, were analyzed for each sampling site across the channel. Pollution load index (PLI) of shore sediments and surface water were 2.51 and 1.67, respectively, indicating significant pollution in the Moheshkhali channel. This research investigation provides insight into anthropogenic activities and baseline microplastic pollution in the Moheshkhali channel of Bangladesh, which helps to prepare robust strategies for conservation and management to deal with such environmental issues.

A review on enhanced microplastics derived from biomedical waste during the COVID-19 pandemic with its toxicity, health risks, and biomarkers

The COVID-19 pandemic led to the explosion of biomedical waste, a global challenge to public health and the environment. Biomedical waste comprising plastic can convert into microplastics (MPs, < 5 mm) by sunlight, wave, oxidative and thermal processes, and biodegradation. MPs with additives and contaminants such as metals are also hazardous to many aquatic and terrestrial organisms, including humans. Bioaccumulation of MPs in organisms often transfers across the trophic level in the global food web. Thus, this article aims to provide a literature review on the source, quantity, and fate of biomedical waste, along with the recent surge of MPs and their adverse impact on aquatic and terrestrial organisms. MPs intake (ingestion, inhalation, and dermal contact) in humans causing various chronic diseases involving multiple organs in digestive, respiratory, and reproductive systems are surveyed, which have been reviewed barely. There is an urgent need to control and manage biomedical waste to shrink MPs pollution for reducing environmental and human health risks.

Personal protective equipment (PPE) pollution driven by COVID-19 pandemic in Marina Beach, the longest urban beach in Asia: Abundance, distribution, and analytical characterization

COVID-19 pandemic has enforced the use of personal protective equipment (PPE, masks and gloves). However, the mismanagement of litter are exacerbating the increasing plastic issue worldwide. In the present study, we sampled discarded PPE in 10 sites along Marina Beach, India. We characterized the litter types by chemical analysis techniques. A total of 1154 COVID-19-associated PPE items were found on Marina beach. The highest number of items were face masks (97.9 %) and the mean PPE density in the sites studied was 4 × 10^-3 PPE m^-2. The results demonstrate that poor solid waste management and lack of awareness are the main causes of pollution at Marina beach. FTIR spectroscopy revealed that face masks and gloves were principally made of polypropylene and latex, respectively. The FTIR spectra also showed signs of chemical degradation. Our results suggest that plastic pollution is increasing, possibly becoming more impactful to marine biota. Beach management measures were discussed.

Environmental challenges of COVID-19 pandemic: resilience and sustainability - A review

The emergence of novel respiratory disease (COVID-19) caused by SARS-CoV-2 has become a public health emergency worldwide and perturbed the global economy and ecosystem services. Many studies have reported the presence of SARS-CoV-2 in different environmental compartments, its transmission via environmental routes, and potential environmental challenges posed by the COVID-19 pandemic. None of these studies have comprehensively reviewed the bidirectional relationship between the COVID-19 pandemic and the environment. For the first time, we explored the relationship between the environment and the SARS-CoV-2 virus/COVID-19 and how they affect each other. Supporting evidence presented here clearly demonstrates the presence of SARS-CoV-2 in soil and water, denoting the role of the environment in the COVID-19 transmission process. However, most studies fail to determine if the viral genomes they have discovered are infectious, which could be affected by the environmental factors in which they are found.The potential environmental impact of the pandemic, including water pollution, chemical contamination, increased generation of non-biodegradable waste, and single-use plastics have received the most attention. For the most part, efficient measures have been used to address the current environmental challenges from COVID-19, including using environmentally friendly disinfection technologies and employing measures to reduce the production of plastic wastes, such as the reuse and recycling of plastics. Developing sustainable solutions to counter the environmental challenges posed by the COVID-19 pandemic should be included in national preparedness strategies. In conclusion, combating the pandemic and accomplishing public health goals should be balanced with environmentally sustainable measures, as the two are closely intertwined.

Microbial strategies for degradation of microplastics generated from COVID-19 healthcare waste

COVID-19 pandemic has led to the generation of massive plastic wastes, comprising of onetime useable gloves, masks, tissues, and other personal protective equipment (PPE). Recommendations for the employ of single-use disposable masks made up of various polymeric materials like polyethylene, polyurethane, polyacrylonitrile, and polypropylene, polystyrene, can have significant aftermath on environmental, human as well as animal health. Improper disposal and handling of healthcare wastes and lack of proper management practices are creating serious health hazards and an extra challenge for the local authorities designated for management of solid waste. Most of the COVID-19 medical wastes generated are now being treated by incineration which generates microplastic particles (MPs), dioxin, furans, and various toxic metals, such as cadmium and lead. Moreover, natural degradation and mechanical abrasion of these wastes can lead to the generation of MPs which cause a serious health risk to living beings. It is a major threat to aquatic lives and gets into foods subsequently jeopardizing global food safety. Moreover, the presence of plastic is also considered a threat owing to the increased carbon emission and poses a profound danger to the global food chain. Degradation of MPs by axenic and mixed culture microorganisms, such as bacteria, fungi, microalgae etc. can be considered an eco-sustainable technique for the mitigation of the microplastic menace. This review primarily deals with the increase in microplastic pollution due to increased use of PPE along with different disinfection methods using chemicals, steam, microwave, autoclave, and incineration which are presently being employed for the treatment of COVID-19 pandemic-related wastes. The biological treatment of the MPs by diverse groups of fungi and bacteria can be an alternative option for the mitigation of microplastic wastes generated from COVID-19 healthcare waste.

Micro- and nanoplastics: A new cardiovascular risk factor?

Exposure to micro- and nanoplastics (MNPs) is inevitable due to their omnipresence in the environment. A growing body of studies has advanced our understanding of the potential toxicity of MNPs but knowledge gaps still exist regarding the adverse effects of MNPs on the cardiovascular system and underlying mechanisms, particularly in humans. Here, we reviewed up-to-date data published in the past 10 years on MNP-driven cardiovascular toxicity and mechanisms. Forty-six articles concerning ADME (absorption, distribution, and aggregation behaviors) and toxicity of MNPs in the circulatory system of animals and human cells were analyzed and summarized. The results showed that MNPs affected cardiac functions and caused toxicity on (micro)vascular sites. Direct cardiac toxicity of MNPs included abnormal heart rate, cardiac function impairment, pericardial edema, and myocardial fibrosis. On (micro)vascular sites, MNPs induced hemolysis, thrombosis, blood coagulation, and vascular endothelial damage. The main mechanisms included oxidative stress, inflammation, apoptosis, pyroptosis, and interaction between MNPs and multiple cellular components. Cardiovascular toxicity was determined by the properties (type, size, surface, and structure) of MNPs, exposure dose and duration, protein presence, the life stage, sex, and species of the tested organisms, as well as the interaction with other environmental contamination. The limited quantitative information on MNPs' ADME and the lack of guidelines for MNP cardiotoxicity testing makes risk assessment on cardiac health impossible. Furthermore, the future directions of cardiovascular research on MNPs are recommended to enable more realistic health risk assessment.

Abundance and characterization of personal protective equipment (PPE) polluting Kish Island, Persian Gulf

Plastic pollution is one of the major environmental threats the world is facing nowadays, which was exacerbated during the COVID-19 pandemic. In particular, multiple reports of single-use plastics driven by the pandemic, namely personal protective equipment (PPE) (e.g., face masks and gloves), contaminating coastal areas have been published. However, most studies focused solely on counting and visually characterizing this type of litter. In the present study, we complement conventional reports by characterizing this type of litter through chemical-analytical techniques. Standardized sampling procedures were carried out in Kish Island, The Persian Gulf, resulting in an average density of 2.34 × 10-4 PPE/m2. Fourier transformed infrared spectroscopy confirmed the polymeric composition of weathered face masks and showed the occurrence of additional absorption bands associated with the photooxidation of the polymer backbone. On the other hand, the three layers of typical surgical face masks showed different non-woven structures, as well as signs of physical degradation (ruptures, cracks, rough surfaces), possibly leading to the release of microplastics. Furthermore, elemental mapping through energy-dispersive X-ray spectroscopy showed that the middle layer of the masks allocated more elements of external origin (e.g., Na, Cl, Ca, Mg) than the outer and inner layers. This is likely to the overall higher surface area of the middle layer. Furthermore, our evidence indicates that improperly disposed PPE is already having an impact on a number of organisms in the study area.

A review of disposable facemasks during the COVID-19 pandemic: A focus on microplastics release

The COVID-19 epidemic seriously threats the human society and provokes the panic of the public. Personal Protective Equipment (PPE) are widely utilized for frontline health workers to face the ongoing epidemic, especially disposable face masks (DFMs) to prevent airborne transmission of coronavirus. The overproduction and massive utilization of DFMs seriously challenge the management of plastic wastes. A huge amount of DFMs are discharged into environment, potentially induced the generation of microplastics (MPs) owing to physicochemical destruction. The MPs release will pose severe contamination burden on environment and human. In this review, environmental threats of DFMs regarding to DFMs fate in environment and DFMs threats to aquatic and terrestrial species were surveyed. A full summary of recent studies on MPs release from DFMs was provided. The knowledge of extraction and characterizations of MPs, the release behavior, and potential threats of MPs derived from DFMs was discussed. To confront the problem, feasible strategies for control DFMs pollution were analyzed from the perspective of source control and waste management. This review provides a better understanding the threats, fate, and management of DFMs linked to COVID-19 pandemic.

Microplastics in environment: global concern, challenges, and controlling measures

Plastic pollution in various forms has emerged as the most severe environmental threat. Small plastic chunks, such as microplastics and nanoplastics derived from primary and secondary sources, are a major concern worldwide due to their adverse effects on the environment and public health. Several years have been spent developing robust spectroscopic techniques that should be considered top-notch; however, researchers are still trying to find efficient and straightforward methods for the analysis of microplastics but have yet to develop a viable solution. Because of the small size of these degraded plastics, they have been found in various species, from human brains to blood and digestive systems. Several pollution-controlling methods have been tested in recent years, and these methods are prominent and need to be developed. Bacterial degradation, sunlight-driven photocatalyst, fuels, and biodegradable plastics could be game-changers in future research on plastic pollution control. However, recent fledgling steps in controlling methods appear insufficient due to widespread contamination. As a result, proper regulation of environmental microplastics is a significant challenge, and the most equitable way to manage plastic pollution. Therefore, this paper discusses the current state of microplastics, some novel and well-known identification techniques, strategies for overcoming microplastic effects, and needed solutions to mitigate this planetary pollution. This review article, we believe, will fill a void in the field of plastic identification and pollution mitigation research.

Microplastic contamination in seawater across global marine protected areas boundaries

Despite the relatively rich literature on the omnipresence of microplastics in marine environments, the current status and ecological impacts of microplastics on global Marine Protected Areas (MPAs) are still unknown. Their ubiquitous occurrence, increasing volume, and ecotoxicological effects have made microplastic an emerging marine pollutant. Given the critical conservation roles of MPAs that aim to protect vulnerable marine species, biodiversity, and resources, it is essential to have a comprehensive overview of the occurrence, abundance, distribution, and characteristics of microplastics in MPAs including their buffer zones. Here, extensive data were collected and screened based on 1565 peer-reviewed literature from 2017 to 2020, and a GIS-based approach was applied to improve the outcomes by considering boundary limits. Microplastics in seawater samples were verified within the boundaries of 52 MPAs; after including the buffer zones, 1/3 more (68 MPAs) were identified as contaminated by microplastics. A large range of microplastic levels in MPAs was summarized based on water volume (0-809,000 items/m³) or surface water area (21.3-1,650,000,000 items/km²), which was likely due to discrepancy in sampling and analytical methods. Fragment was the most frequently observed shape and fiber was the most abundant shape. PE and PP were the most common and also most abundant polymer types. Overall, 2/3 of available data reported that seawater microplastic levels in MPAs were higher than 12,429 items/km², indicating that global MPAs alone cannot protect against microplastic pollution. The current limitations and future directions were also discussed toward the post-2020 Global Biodiversity Framework goals.

Generation and consequence of nano/microplastics from medical waste and household plastic during the COVID-19 pandemic

Since the end of 2019, the world has faced a major crisis because of the outbreak of COVID-19 disease which has created a severe threat to humanity. To control this pandemic, the World Health Organization gave some guidelines like wearing PPE (personal protective equipment) (e.g., face masks, overshoes, gloves), social distancing, hand hygiene and shutting down all modes of public transport services. During this pandemic, plastic products (e.g., household plastics, PPE and sanitizer bottles) have substantially prevented the spread of this virus. Since the outbreak, approximately 1.6 million tons of plastic waste have been generated daily. However, single-use PPE like face masks (N95), surgical masks and hand gloves contain many non-biodegradable plastics materials. These abandoned products have created a huge number of plastic debris which ended up as microplastics (MPs) followed by nanoplastics (NPs) in nature that are hazardous to the eco-system. These MPs and NPs also act as vectors for the various pathogenic contaminants. The goal of this review is to offer an extensive discussion on the formation of NPs and MPs from all of these abandoned plastics and their long-term impact on the environment as well as human health. This review paper also attempts to assess the present global scenario and the main challenge of waste management to reduce the potential NP/MPs pollution to improve the eco-systems.

Single Use Personal Protective Equipment Reinforced Asphalt

Due to the COVID-19 pandemic, global personal protective equipment (PPE) volume production and demand increased by 300-400% between 2019 and 2021. In this scenario, the present study aims to propose and validate an innovative circular economy scenario for end of life (EoL) PPEs, reusing them to produce reinforced bituminous mixtures. Despite that several studies confirmed the possibility of reusing plastic in the asphalt mixtures, none of them investigated the potential of PPEs, highlighting the innovativeness in the scientific panorama. Five different alternatives of EoL PPE mixtures (different products, materials, dosages, etc.) were tested at laboratory scale to verify the technical feasibility of the proposed scenario. The most promising solution resulted to be the mix of gloves and face masks composed by polypropylene, polyethylene, nitrile and lattice at a dosage of 0,5% weight/weight that allowed to produce bituminous mixtures with acceptable performances in terms of relevant mechanical parameters while recycling waste PPEs. This leads to environmental benefits, since more than 3kg of EoL PPEs per square meter of road pavement can be reused instead of disposed (about 1,5 million tons/year considering the bituminous mixtures produced at European level), as well as economic benefits for public administrations and the collectivity, due to the reduced landfilling of solid wastes.

Polyethylene microplastics trigger cell apoptosis and inflammation via inducing oxidative stress and activation of the NLRP3 inflammasome in carp gills

Microplastics cause varying degrees of damage to aquatic organisms. Exposure to microplastics contaminated water, the gills are among the first tissues, after the skin, to be affected by microplastics. As an essential immune organ, prolonged stimulation by microplastics disrupts immune function not only in the gills but throughout the body, yet the underlying mechanisms remain elusive. A model of gill injury from exposure to polyethylene (PE) microplastics was developed in this study. H&E staining revealed that polyethylene microplastics caused gill inflammation, vascular remodeling, and mucous cell proliferation. An increase in collagen indicates severe tissue damage. Additional analysis showed that polyethylene microplastics profoundly exacerbated oxidative stress in the gills. TUNEL assay demonstrated cell apoptosis induced by polyethylene microplastic. The mRNA levels were subsequently quantified using RT-PCR. The results showed that polyethylene microplastics increased the expression of the nuclear factor-κB (NF-κB) pathway (NF-κB p65, IKKα, IKKβ) and apoptosis biomarkers (p53, caspase-3, caspase-9, and Bax). Nucleotide-binding oligomerization domain-like receptor protein 3 (NLRP3) inflammasomes, which is an influential component of innate immunity, were overactive. What's more, the pro-inflammatory factors (TNF-α, IFN-γ, IL-2, IL-6, IL-8, IL-1β) that induce immune disorder also increased significantly, while the anti-inflammatory factors (IL-4, IL-10) decreased significantly. These results suggested that oxidative stress acted as an activation signal of apoptosis triggered by the NF-κB pathway and activating the NLRP3 inflammasome to promote inflammatory immune responses. The present study provided a different target for the prevention of toxin-induced gill injury under polyethylene microplastics.

Novel strategy in biohydrogen energy production from COVID - 19 plastic waste: A critical review

Usage of plastics in the form of personal protective equipment, medical devices, and common packages has increased alarmingly during these pandemic times. Though they have served as an excellent protection source in minimizing the coronavirus disease (COVID-19) spreading, they have still emerged as major environmental pollutants nowadays. These non-degradable COVID-19 plastic wastes (CPW) were treated through incineration and landfilling process, which may lead to either the release of harmful gases or contaminating the surrounding environment. Further, they can cause numerous health hazards to the human and animal populations. These plastic wastes can be efficiently managed through thermochemical processes like pyrolysis or gasification, which assist in degrading the plastic waste and also effectively convert them into useful energy-yielding products. The pyrolysis process promotes the formation of liquid fuels and chemicals, whereas gasification leads to syngas and hydrogen fuel production. These energy-yielding products can help to compensate for the fossil fuels depletion in the near future. There are many insights explained in terms of the types of reactors and influential factors that can be adopted for the pyrolysis and gasification process, to produce high efficient energy products from the wastes. In addition, advanced technologies including co-gasification and two-stage gasification were also reviewed.

Environmental impact assessment of plastic waste during the outbreak of COVID-19 and integrated strategies for its control and mitigation

During the COVID-19 pandemic, many positive shifts have been observed in the ecosystem, with a significant decrease in the greenhouse gas emissions and air pollution. On the other hand, there were unavoidable negative shifts due to a surge in demand for plastic products such as food and groceries' delivery packaging, single-use plastics, medical and personal protective equipment to prevent transmission of COVID-19. Plastic pollution can be considered as a key environmental issue in world due to the huge footprints of plastics on natural ecosystems and public health. Herein, we presented an overview on the rise of plastic pollution during the COVID-19 pandemic. The potential sources of plastic waste during COVID-19 with its negative effects on the environment such as marine ecosystems and the global economics are highlighted. We also suggested some strategies and recommendations to tackle plastic leakages by applying feedstock recycling, sterilization, and with the use of biodegradable plastics that have become a sustainable alternative to fossil fuel plastics. Also, the importance of elevating public awareness and some recommendations to mitigate plastic generated during the pandemic has been addressed as well.

Upcycling face mask wastes generated during COVID-19 into value-added engineering materials: A review

Billions of disposable face masks (i.e., single-use masks) are used and discarded worldwide monthly due to the COVID-19 outbreak. The immethodical disposal of these polymer-based wastes containing non-biodegradable constituents (e.g., polypropylene) has provoked marked and severe damage to the ecosystem. Meanwhile, their ever-growing usage significantly strains the present-day waste management measures such as landfilling and incineration, resulting in large quantities of used face-covering masks landing in the environment as importunate contaminants. Hence, alternative waste management strategies are crucially demanded to decrease the negative impacts of face mask contamination. In this venue, developing high-yield, effective, and green routes toward recycling or upcycling face mask wastes (FMWs) into value-added materials is of great importance. While existing recycling processes assist the traditional waste management, they typically end up in materials with downgraded physicochemical, structural, mechanical, and thermal characteristics with reduced values. Therefore, pursuing potential economic upcycling processes would be more beneficial than waste disposal and/or recycling processes. This paper reviews recent advances in the FMWs upcycling methods. In particular, we focus on producing value-added materials via various waste conversion methods, including carbonization (i.e., extreme pyrolysis), pyrolysis (i.e., rapid carbonization), catalytic conversion, chemical treatment, and mechanical reprocessing. Generally, the upcycling methods are promising, firming the vital role of managing FMWs' fate and shedding light on the road of state-of-the-art materials design and synthesis.

Improving the compaction properties and shear resistance of a sand reinforced with COVID-19 waste mask fibers

Due to the COVID-19 pandemic, disposable face-masks were excessively used around the world, which led to severe environmental problems. The main purpose of this research is to test the possibility of reinforcing a sandy soil with mask fibers to reuse pandemic-generated waste materials. When testing the compaction properties, the sand was reinforced with a fiber content that increased from 0% to 0.5%, with successive small increments of 0.1%. An optimum content of 0.1% remarkably increased the maximum dry density of the soil and dropped its optimum moisture content. Add to that, it was noticed that 15 mm and rectangular chips were respectively the optimum fiber length and shape to maximize the improvement of the sand compaction properties. Regarding the shear strength, fiber contents of 0.1%, 0.25%, and 0.5% were adopted. The direct shear tests have shown that the highest enhancement was observed for an optimum fiber content of 0.25%. Similarly to compaction tests, 15 mm and rectangular chips were respectively the optimum fiber length and shape to extremely enhance the shear resistance of the tested sand.

Synthesis of Sulfonated Carbon from Discarded Masks for Effective Production of 5-Hydroxymethylfurfural

5-hydroxymethylfurfural (HMF), as one of the top ten important platform chemicals, can be used to produce 2,5-furandicarboxylic acid (FDCA), 2,5-dimethyl furan (DMF), levulinic acid, and other chemicals. An environmentally friendly system for the synthesis of sulfonated carbon materials from discarded masks has been proposed. A series of mask-based solid acid catalysts (bMC-SO3H) were prepared by a simple two-step process. Mechanochemical pretreatment (ball milling) of waste mask and sulfonated group precursor, followed by thermal carbonization under nitrogen gas, were used to synthesize sulfonated porous carbon. The total acid amount of the prepared bMC-SO3H was measured by the Boehm method, which exhibited 1.2–5.3 mmol/g. The addition of the sulfonated group precursor in the mechanochemical treatment (ball milling) process caused intense structure fragmentation of the discarded masks. These sulfonated porous carbons (bMC(600)-SO3H) as solid acid catalysts achieved fructose conversion of 100% and HMF yield of 82.1% after 120 min at 95 °C in 1-butyl-3-methylimidazolium chloride. The bMC-SO3H could be reused five times, during which both the HMF yield and fructose conversion were stable. This work provides a strategy for the synthesis of sulfonated carbon from discarded masks and efficient catalyzed fructose upgrading to HMF.

Covid-19 waste facemask conundrum: A facile way of utilization through fabricating composite material with unsaturated polyester resin and evaluation of its mechanical properties

Since the outbreak of novel coronavirus (COVID-19), the use of personal protective equipment (PPE) has increased profusely. Among all the PPEs, face masks are the most picked ones by the mass people for protective purpose. This spawned extensive daily use of face masks and production of masks had to augment to keep up this booming demand. Such extensive use of face masks has resulted in a huge waste generation. Lack of proper disposal, waste management and waste recycling have already led this waste to pervade in the environment. In quest of finding a solution, here in this research, a composite material was fabricated utilizing waste face mask (WFM) with unsaturated polyester resin (UPR) and the mechanical properties were evaluated. The composites were fabricated by incorporating 1%, 2%, 3%, 4% and 5% WFM (by weight) within the UPR matrix in the shredded form following hand lay-up technique. Tensile properties, i.e., tensile strength (TS), tensile modulus (TM) and percentage elongation at break (% EB) as well as flexural properties, i.e., bending strength (BS) and bending modulus (BM) were evaluated for the fabricated composites. According to the results obtained, the 2% WFM loaded composites showed highest values of TS, TM, BS and BM which are 31.61 N/mm², 1551.41 N/mm², 66.53 N/mm² and 4632.71 N/mm² respectively. These values of 2% WFM loaded composite are 69.58%, 107.78%, 129.49% and 152% higher than the values of the control sample (UPR). Such results depict the successfulness of WFM's incorporation as a reinforcing material in the composite materials. Attenuated Total Reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), water uptake and thickness swelling tests were also carried out for the fabricated composites. FTIR of the collected WFM revealed the fiber to be of polypropylene and the existing functional groups were also identified. The SEM images confirmed the proper adhesion of WFM and UPR in terms of mechanical bonding rather than chemical bonding. Water absorption and dimension change was investigated by water uptake and thickness swelling test. To sum up, the way we have utilized WFM as a reinforcing agent in a composite material, this could be a possible solution for the face mask's waste conundrum.

Unraveling the potential human health risks from used disposable face mask-derived micro/nanoplastics during the COVID-19 pandemic scenario: A critical review

With the global spread of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2), disposable face masks (DFMs) have caused negative environmental impacts. DFMs will release microplastics (MPs) and nanoplastics (NPs) during environmental degradation. However, few studies reveal the release process of MPs/NPs from masks in the natural environment. This review presents the current knowledge on the abiotic and biotic degradation of DFMs. Though MPs and NPs have raised serious concerns about their potentially detrimental effects on human health, little attention was paid to their impacts on human health from DFM-derived MPs and NPs. The potential toxicity of mask-derived MPs/NPs, such as gastrointestinal toxicity, pneumotoxicity, neurotoxicity, hepatotoxicity, reproductive and transgenerational toxicity, and the underlying mechanism will be discussed in the present study. MPs/NPs serve as carriers of toxic chemicals and pathogens, leading to their bioaccumulation and adverse effects of biomagnification by food chains. Given human experiments are facing ethical issues and animal studies cannot completely reveal human characteristics, advanced human organoids will provide promising models for MP/NP risk assessment. Moreover, in-depth investigations are required to identify the release of MPs/NPs from discarded face masks and characterize their transportation through the food chains. More importantly, innovative approaches and eco-friendly strategies are urgently demanded to reduce DFM-derived MP/NP pollution.

Release of phthalate esters (PAEs) and microplastics (MPs) from face masks and gloves during the COVID-19 pandemic

Marine pollution with personal protective equipment (PPE) has recently gained major attention. Multiple studies reported the release of microplastics (MPs) and chemical contaminants from face masks, the most used PPE type. However, not much is known concerning the release of phthalate esters (PAEs) in aquatic media, as well as the hazard posed by other types of PPE. In the present study, we investigated the release of MPs and PAEs from face masks and gloves recovered from the environment. The results indicated that both PPEs release MPs comparable to the literature, but higher concentrations were presented by face masks. In turn, the total concentration of six PAEs was higher in gloves than in face masks. The release of these contaminants is exacerbated over time. The present study allows researchers to understand the contribution of PPE to marine pollution while accounting for gloves, a generally overlooked source of contaminants.

COVID-19 disposable face masks: a precursor for synthesis of valuable bioproducts

Disposable face mask has become a mandatory personal protective equipment in order to prevent contracting COVID-19. With the significant surge in its usage, its adverse environmental impact is becoming a source of concern. Disposable face masks are made from thermoplastic polymers, and therefore they can be safely converted into valuable bioproducts. This paper discussed the possibility of converting waste/contaminated face masks into valuable bioproducts, which will essentially eliminate secondary transmission of the coronavirus and the concerns of environmental pollution.

COVID-19-related litter pollution on Greek beaches and nearshore shallow water environments

COVID-19 pandemic has led to an increase in certain types of litter, many of which are expected to end up in the marine environment. The present study aimed to monitor the pandemic-related litter pollution along the Greek coastal environment. Overall, 59 beach and 83 underwater clean-ups were conducted. Litter was categorized as: PPE (face masks and gloves), COVID-19-related, single-use plastic (SUP) and takeaway items. PPE, dominated by face masks (86.21 %), accounted for 0.29 % of all litter. The average PPE density was 3.1 × 10^-3 items m^-2 and 2.59 items/ 100 m. COVID-19-related items represented 1.04 % of the total. Wet wipes showed higher densities (0.67 % of all litter) than in the pre-COVID era, while no increase in SUP and takeaway items was observed. Benthic PPE, dominated by gloves (83.95 %), represented 0.26 % of the total. The mean PPE density was 2.5 × 10^-3 items m^-2.

Factors Controlling Degradation of Biologically Relevant Synthetic Polymers in Solution and Solid State

The field of biodegradable synthetic polymers, which is central for regenerative engineering and drug delivery applications, encompasses a multitude of hydrolytically sensitive macromolecular structures and diverse processing approaches. The ideal degradation behavior for a specific life science application must comply with a set of requirements, which include a clinically relevant kinetic profile, adequate biocompatibility, benign degradation products, and controlled structural evolution. Although significant advances have been made in tailoring materials characteristics to satisfy these requirements, the impacts of autocatalytic reactions and microenvironments are often overlooked resulting in uncontrollable and unpredictable outcomes. Therefore, roles of surface versus bulk erosion, in situ microenvironment, and autocatalytic mechanisms should be understood to enable rational design of degradable systems. In an attempt to individually evaluate the physical state and form factors influencing autocatalytic hydrolysis of degradable polymers, this Review follows a hierarchical analysis that starts with hydrolytic degradation of water-soluble polymers before building up to 2D-like materials, such as ultrathin coatings and capsules, and then to solid-state degradation. We argue that chemical reactivity largely governs solution degradation while diffusivity and geometry control the degradation of bulk materials, with thin "2D" materials remaining largely unexplored. Following this classification, this Review explores techniques to analyze degradation in vitro and in vivo and summarizes recent advances toward understanding degradation behavior for traditional and innovative polymer systems. Finally, we highlight challenges encountered in analytical methodology and standardization of results and provide perspective on the future trends in the development of biodegradable polymers.

Tracking the impacts of COVID-19 pandemic-related debris on wildlife using digital platforms

Since the start of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2; COVID-19) pandemic in December 2019, there have been global surges of single-use plastic use. Due to the importance of personal protective equipment (PPE) and sanitation items in protecting against virus transmission and from testing, facemasks, respirators, disposable gloves and disposable wet wipes have become global staples in households and institutions. Widespread use and insufficient infrastructure, combined with improper waste management have resulted in an emerging category of litter. With widespread presence in the environment, such items pose a direct threat to wildlife as animals can interact with them in a series of ways. We examined the scope of COVID-19 pandemic-related debris, including PPE and sanitation items, on wildlife from April 2020 to December 2021. We document the geographic occurrence of incidents, debris types, and consequences of incidents that were obtained from social media searches, unpublished reports from colleagues, and reports available from the citizen science database "Birds and Debris". There were 114 unique sightings of wildlife interactions with pandemic-related debris (38 from 2020 and 76 from 2021). Within the context of this dataset, most incidents involved birds (83.3 %), while fewer affected mammals (10.5 %), invertebrates (3.5 %), fish (1.8 %), and sea turtles (0.9 %). Sightings originated in 23 countries, and consisted mostly of entanglements (42.1 %) and nest incorporations (40.4 %). We verified sightings by contacting the original observers and were able to identify replicated sightings and increase the resolution of the data collected compared with previously published results. Due to the complexities associated with global use and accessibility of digital platforms, we likely underestimate the number of animals harmed by debris. Overall, the global scope of this study demonstrates that online and social media platforms are a valuable way to collect biologically relevant citizen science data and track rapidly emerging environmental challenges.

Prospects of TiO2-based photocatalytic degradation of microplastic leachates related disposable facemask, a major COVID-19 waste

COVID-19 is one of the serious catastrophes that have a substantial influence on human health and the environment. Diverse preventive actions were implemented globally to limit its spread and transmission. Personnel protective equipment (PPE) was an important part of these control approaches. But unfortunately, these types of PPE mainly comprise plastics, which sparked challenges in the management of plastic waste. Disposable face masks (DFM) are one of the efficient strategies used across the world to ward off disease transmission. DFMs can contribute to micro and nano plastic pollution as the plastic present in the mask may degrade when exposed to certain environmental conditions. Microplastics (MPs) can enter the food chain and devastate human health. Recognizing the possible environmental risks associated with the inappropriate disposal of masks, it is crucial to avert it from becoming the next plastic crisis. To address this environmental threat, titanium dioxide (TiO2)-based photocatalytic degradation (PCD) of MPs is one of the promising approaches. TiO2-based photocatalysts exhibit excellent plastic degradation potential due to their outstanding photocatalytic ability, cost efficiency, chemical, and thermal stability. In this review, we have discussed the reports on COVID-19 waste generation, the limitation of current waste management techniques, and the environmental impact of MPs leachates from DFMs. Mainly, the prominence of TiO2 in the PCD and the applications of TiO2-based photocatalysts in MPs degradation are the prime highlights of this review. Additionally, various synthesis methods to enhance the photocatalytic performance of TiO2 and the mechanism of PCD are also discussed. Furthermore, current challenges and the future research perspective on the improvement of this approach have been proposed.

The plastic pandemic: COVID-19 has accelerated plastic pollution, but there is a cure

Plastic pollution is now present in all areas of our planet, including its last wilderness, Antarctica, and the plastic crisis has further escalated because of COVID-19. The pandemic has caused a significant increase in the global consumption of single-use protective items such as masks and gloves. These and other plastic items add to the suite of plastic pollution issues, from entanglement of wildlife to microplastic bioaccumulation. Given plastics are a major threat facing humans and wildlife, swift action to reduce plastic pollution is urgently needed. Solutions to plastic pollution are within reach. With collective, impactful action we will ensure a better future for our planet and ourselves. Here, we propose several measures for decision-makers to implement to achieve a solution and tackle plastic pollution as a united, global community.

Face masks invading protected areas: Risks and recommendations

Among the indirect environmental impacts generated by the global COVID-19 pandemic, contamination with personal protective equipment (PPE), like face masks, may be one of the most relevant ones. PPE has been found in multiple aquatic, marine, and terrestrial environments, including places of absolute relevancy to biodiversity conservation, such as protected areas (PAs). Here, a brief report of the presence of PPE in six PAs of Peru is presented. PPE pollution in PAs consisted mainly of single-use and reusable face masks, as well as plastics associated with PAs, such as KN95 respirator wrappings. The mean PPE density was estimated as 1.32 × 10^-3 PPE/m². FTIR spectroscopy confirmed that face masks and wrappers mainly consisted of polypropylene and polyethylene, two of the most commonly available synthetic polymers. The material was poorly degraded according to their FTIR spectra, possibly suggesting that they were discarded recently. The recent ban on single-use plastic in Peruvian PAs is regarded as a great step forward toward the efforts made to preserve these invaluable places. However, these measures seemed insufficient to prevent PPE and other types of litter from contaminating areas of ecological importance. Considering the current scenario, several recommendations were proposed to be implemented in PAs in order to prevent PPE from becoming a new plastic issue to tackle. These recommendations are expected to also serve for future events where the use of single-use plastics becomes inevitable, like global pandemics.

SARS-CoV-2 at the Human-Animal Interface: Implication for Global Public Health from an African Perspective

The coronavirus disease 2019 (COVID-19) pandemic has become the most far-reaching public health crisis of modern times. Several efforts are underway to unravel its root cause as well as to proffer adequate preventive or inhibitive measures. Zoonotic spillover of the causative virus from an animal reservoir to the human population is being studied as the most likely event leading to the pandemic. Consequently, it is important to consider viral evolution and the process of spread within zoonotic anthropogenic transmission cycles as a global public health impact. The diverse routes of interspecies transmission of SARS-CoV-2 offer great potential for a future reservoir of pandemic viruses evolving from the current SARS-CoV-2 pandemic circulation. To mitigate possible future infectious disease outbreaks in Africa and elsewhere, there is an urgent need for adequate global surveillance, prevention, and control measures that must include a focus on known and novel emerging zoonotic pathogens through a one health approach. Human immunization efforts should be approached equally through the transfer of cutting-edge technology for vaccine manufacturing throughout the world to ensure global public health and one health.

Bacterial Cellulose: Nano-biomaterial for Biodegradable Face Masks- A Greener Approach Towards Environment

The use of face masks aids to stop the transmission of various deadly communicable ailments, and therefore widespread mask wearing habit is advocated by nearly all health organisations including the WHO to curb the COVID-19 pandemic. Recent studies predicted a shocking requirement of masks globally, approximately billions of masks per week in a single country, and maximum of them are disposable masks, which are made up of nonbiodegradable material such as polypropylene. With expanding review on improper masks disposal, it is imperative to perceive this inherent environmental hazard and avert it from resulting in the subsequent problematic situation due to plastic. The shift towards biodegradable biopolymers alternatives such as bacterial cellulose and newly evolving sustainable scientific knowledge would be significant to dealt with upcoming environmental problem. Bacterial cellulose possesses various desirable properties to replace the conventional mask material. This review gives an overview of data about accumulation of waste masks and its potential harm on environment. It also focuses on diverse characteristics of bacterial cellulose which make it suitable material for making mask and the challenges in the way of bacterial cellulose production and their possible solution. The current review also discussed the report on global bacterial cellulose market growth.

Release of microplastics and nanoplastics in water from disposable surgical masks after disinfection

During the COVID-19 pandemic, disposable surgical masks were generally disinfected and reused due to mask shortages. Herein, the role of disinfected masks as a source of microplastics (MPs) and nanoplastics (NPs) was investigated. The amount of MPs and NPs released from masks disinfected by UV ranged from 1054 ± 106 to 2472 ± 70 and from 2.55 ± 0.22 × 10⁹ to 6.72 ± 0.27 × 10⁹ particles/piece, respectively, comparable to that of the undisinfected masks, and the MPs were changed to small-sized particles. The amount of MPs and NPs released after alcohol and steam treatment were respectively lower and higher than those from undisinfected masks, and MPs were shifted to small-sized particles. The amount of MPs and NPs released in water after autoclaving was lower than for undisinfected masks. In all, the amount of fibers released after disinfection decreased greatly, and certain disinfection processes were found to increase the amount of small-sized NPs released from masks into aqueous environments.

A review on the impacts of nanomaterials on neuromodulation and neurological dysfunction using a zebrafish animal model

Nanomaterials have been widely employed from industrial to medical fields due to their small sizes and versatile characteristics. However, nanomaterials can also induce unexpected adverse effects on health. In particular, exposure of the nervous system to nanomaterials can cause serious neurological dysfunctions and neurodegenerative diseases. A number of studies have adopted various animal models to evaluate the neurotoxic effects of nanomaterials. Among them, zebrafish has become an attractive animal model for neurotoxicological studies due to several advantages, including the well-characterized nervous system, efficient genome editing, convenient generation of transgenic lines, high-resolution in vivo imaging, and an array of behavioral assays. In this review, we summarize recent studies on the neurotoxicological effects of nanomaterials, particularly engineered nanomaterials and nanoplastics, using zebrafish and discuss key findings with advantages and limitations of the zebrafish model in neurotoxicological studies.

Mitigation of microfibers release from disposable masks - An analysis of structural properties

The use of disposable face masks increased rapidly among the general public to control the COVID-19 spread. Eventually, it increased the disposal of masks and their associated impacts on environmental pollution. Hence, this study aims to analyze the impact of nonwoven fabric structural parameters and weathering on the microfiber release characteristics. Spunbond polypropylene nonwoven with four different weights and meltblown nonwoven with two different weights were used in this study to analyze microfiber release at dry, and wet conditions to simulate improper disposal in the environment. Exposure to sunlight significantly increases the microfiber release from 35 to 50% for spunbond fabric and 56-89% for meltblown fabric. Weathering in sunlight structurally affected the tensile properties of the polypropylene fibers due to photodegradation. The study showed that each mask can produce 1.5 × 10² and 3.45 × 10¹ mg of microfiber/mask respectively in dry and wet states. In the case of structural parameters, a higher GSM (grams per square meter), abrasion resistance, bursting strength, and thickness showed a positive correlation with microfiber release in both fabrics. Significantly a higher microfiber release was reported with meltblown fabric than the spunbond for a given GSM. The presence of finer fibers and more fibers per unit area in meltblown fabric was noted as the main cause. Nonwoven fabric GSM and the number of fibers in a specific area showed a higher influence on microfiber release. Based on the mask consumption reported in the literature, India alone can produce around 4.27 × 10² tons of microfibers/week as an average of dry and wet conditions. The study suggests that the proper selection of physical parameters can significantly reduce the microfiber fiber release at all stages.

Biodegradable Smart Face Masks for Machine Learning-Assisted Chronic Respiratory Disease Diagnosis

Utilizing smart face masks to monitor and analyze respiratory signals is a convenient and effective method to give an early warning for chronic respiratory diseases. In this work, a smart face mask is proposed with an air-permeable and biodegradable self-powered breath sensor as the key component. This smart face mask is easily fabricated, comfortable to use, eco-friendly, and has sensitive and stable output performances in real wearable conditions. To verify the practicability, we use smart face masks to record respiratory signals of patients with chronic respiratory diseases when the patients do not have obvious symptoms. With the assistance of the machine learning algorithm of the bagged decision tree, the accuracy for distinguishing the healthy group and three groups of chronic respiratory diseases (asthma, bronchitis, and chronic obstructive pulmonary disease) is up to 95.5%. These results indicate that the strategy of this work is feasible and may promote the development of wearable health monitoring systems.

Multi-Scale Characterization of High-Temperature Properties and Thermal Storage Stability Performance of Discarded-Mask-Modified Asphalt

In the context of the global pandemic of COVID-19, the use and disposal of medical masks have created a series of ethical and environmental issues. The purpose of this paper is to study and evaluate the high temperature properties and thermal storage stability of discarded-mask (DM)-modified asphalt from a multi-scale perspective using molecular dynamics (MD) simulation and experimental methods. A series of tests was conducted to evaluate the physical, rheological, thermal storage stability and microscopic properties of the samples. These tests include softening point, rotational viscosity, dynamic shear rheology (DSR), Fourier transform infrared (FT-IR) spectroscopy and molecular dynamics simulation. The results showed that the DM modifier could improve the softening point, rotational viscosity and rutting factor of the asphalt. After thermal storage, the DM-modified asphalt produced segregation. The difference in the softening point between the top and bottom of the sample increased from 2.2 °C to 17.1 °C when the DM modifier admixture was increased from 1% to 4%. FT-IR test results showed that the main component of the DM modifier was polypropylene, and the DM-modified asphalt was mainly a physical co-blending process. MD simulation results show that the DM modifier can increase the cohesive energy density (CED) and reduce the fractional free volume (FFV) of asphalt and reduce the binding energy between base asphalt and DM modifier. Multi-scale characterization reveals that DM modifiers can improve the high temperature performance and reduce the thermal storage stability of asphalt. It is noteworthy that both macroscopic tests and microscopic simulations show that 1% is an acceptable dosage level.

Polypropylene Modified with Ag-Based Semiconductors as a Potential Material against SARS-CoV-2 and Other Pathogens

The worldwide outbreak of the coronavirus pandemic (COVID-19) and other emerging infections are difficult and sometimes impossible to treat, making them one of the major public health problems of our time. It is noteworthy that Ag-based semiconductors can help orchestrate several strategies to fight this serious societal issue. In this work, we present the synthesis of α-Ag₂WO₄, β-Ag₂MoO₄, and Ag₂CrO₄ and their immobilization in polypropylene in the amounts of 0.5, 1.0, and 3.0 wt %, respectively. The antimicrobial activity of the composites was investigated against the Gram-negative bacterium Escherichia coli, the Gram-positive bacterium Staphylococcus aureus, and the fungus Candida albicans. The best antimicrobial efficiency was achieved by the composite with α-Ag₂WO₄, which completely eliminated the microorganisms in up to 4 h of exposure. The composites were also tested for the inhibition of SARS-CoV-2 virus, showing antiviral efficiency higher than 98% in just 10 min. Additionally, we evaluated the stability of the antimicrobial activity, resulting in constant inhibition, even after material aging. The antimicrobial activity of the compounds was attributed to the production of reactive oxygen species by the semiconductors, which can induce high local oxidative stress, causing the death of these microorganisms.

Occurrence and Distribution of Microplastics from Nepal's Second Largest Lake

Due to its harmful impact on biota, microplastic pollution is the top priority research in many countries. However, there is hardly any research on microplastic pollution in Nepal's freshwater. Therefore, the present research was accomplished in Phewa Lake to evaluate the occurrence and distribution of microplastic contamination in shoreline sediments. The average abundance of microplastic varied from 55 to 122.5 items/kg dry weight (dw). The highest value appeared on densely populated eastern side of the lake and the western region reported the lowest concentration of microplastic. With regard to the shape, fibers dominated the sediments of Phewa Lake accounting for 62.03%. The dominant color was transparent (23.53%) followed by blue (21.39%). The size category 0.2-1 mm recorded the highest abundance of microplastic. Similarly, Fourier transform infrared spectroscopy (FTIR) reveal the dominant polymer type as polypropylene (PP) and polyethylene (PE). The outcome of this result adds a step toward filling the existing knowledge gap and providing a database on microplastic pollution in Nepal's freshwater.

Migration of Microplastics and Phthalates from Face Masks to Water

Since the outbreak of COVID-19, face masks have been introduced in the complex strategy of infection prevention and control. Face masks consist of plastic polymers and additives such as phthalates. The aim of this study was to evaluate the migration of microplastics (MP) and phthalates from face masks to water. Four types of masks including FFP2 masks and surgical were studied. Masks were first characterized to determine the different layers and the material used for their fabrication. Then, masks were cut into 20 pieces of 0.5 cm2, including all their layers, placed in water, and the migration of MP and phthalates was evaluated according to the conditions stated in EU Regulation No 10/2011 on plastic materials and articles intended to come into contact with food. For MP, the morphological analysis (shape, dimension, particle count) was performed using a stereomicroscope, while the identification of both masks and MP released was conducted using μ-Fourier-transform infrared spectroscopy (µ-FT-IR). Migration of phthalates was assessed by ultra-high-performance liquid chromatography coupled to triple quadrupole mass spectrometer (UPLC-MS/MS). Face masks analyzed in the present study were made of atactic polypropylene (PP) as stated by the manufacturer. The μ-FT-IR confirmed that PP and polyamide (PA) were released as fragments, while both PP and polyester (PES) were released as fibers. In addition, 4 phthalates were identified at concentrations between 2.34 and 21.0 µg/mask. This study shows that the migration study can be applied to evaluate the potential release of MP and phthalates from face masks to water and could give a hint for the potential impact of their incorrect disposal on the aquatic resources.

A Review of the Fabrication Methods, Testing, and Performance of Face Masks

Improvement in the performance and compatibility of face masks has remained the focus of researchers in recent years, especially after the emergence of the COVID pandemic. Although a lot of progress in the design, tolerability, and comfort of the mask has been reported, there are certain limitations, requiring further improvement. The present review aims to highlight the filtration efficacy, comfort, and associated characteristic of various types of face masks and respirators as a function of their design and structure. In addition, the air pollutants, their adverse effects on health, certified respirators, and face masks are also discussed. The present review also provides an insight into different types of commercially available face masks in terms of their materials, filtration efficiency, and limitations. The role of emerging trends (such as nanotechnology and high-performance polymers) in the improvement and development of face masks and respirators is also discussed.

Hydrothermal deconstruction of single-use personal protective equipment: process design and economic performance

Increased demand for single-use personal protective equipment (PPE) during the COVID-19 pandemic has resulted in a marked increase in the amount of PPE waste and associated environmental pollution. Developing efficient and environmentally safe technologies to manage and dispose of this PPE waste stream is imperative. We designed and evaluated a hydrothermal deconstruction technology to reduce PPE waste by up to 99% in weight. Hydrothermal deconstruction of single-use PPE waste was modelled using experimental data in Aspen Plus. Techno-economic and sensitivity analyses were conducted, and the results showed that plant scale, plant lifetime, discount rate, and labour costs were the key factors affecting overall processing costs. For a 200 kg/batch plant under optimal conditions, the cost of processing PPE waste was found to be 10 NZD/kg (6 USD/kg), which is comparable to the conventional practice of autoclaving followed by landfilling. The potential environmental impacts of this process were found to be negligible; meanwhile, this practice significantly reduced the use of limited landfill space.

Spatiotemporal variations in marine litter along the Gulf of Guinea coastline, Araromi seaside, Nigeria

This study assessed the seasonal variation in the magnitude of marine litter along the Gulf of Guinea coastline, Araromi seaside, Nigeria with a survey of twenty sampling sites. The total number of litter items collected was 29,029 comprising 7358 and 21,671 items in the dry and rainy season respectively. The average number of items per square meter was higher in the rainy season (1.80 ± 0.35) than in the dry season (0.61 ± 0.19). Plastic materials dominated the litter composition with 86 % and 91.8 % in the dry and rainy season respectively. The beach cleanliness assessed as clean coast index (CCI) depicted the beach as dirty (12.26 ± 3.74) during the dry season and extremely dirty (36.13 ± 6.91) in the rainy season. The hazardous item index (HII) also showed the coastline was littered with hazardous items. These results provide baseline data for marine litter management along the Gulf of Guinea coastlines and other coastlines in Africa.

Generalized Kubelka's theory for light transmission in multilayer materials and its application for UV light penetration in filtering facepiece respirators

The spread of SARS-CoV-2 has resulted in the shortage of filtering facepiece respirators (FFRs). As a result, the use of ultraviolet (UV) irradiation for disinfection and reuse of FFRs has been the topic of much investigation. In this article, a mathematical model is developed based on Kubelka's theory to determine light transmission in multilayer materials, such as N95 masks. Using this model, the predicted UV transmittance and absorbance of a N95 mask layers were found to be in close agreement with the experimental values. In addition, when the mask was exposed to UV equally from both surfaces, the estimated minimum UV irradiance inside the N95 mask was 14.5% of the incident irradiance, suggesting a significant degree of light penetration. The proposed model provides a simple and practical methodology for the design and use of UV decontamination equipment for FFRs and other multilayer materials.