1651
|
Dunehoo AL, Anderson M, Majumdar S, Kobayashi N, Berkland C, Siahaan TJ. Cell Adhesion Molecules for Targeted Drug Delivery. J Pharm Sci 2006; 95:1856-72. [PMID: 16850395 DOI: 10.1002/jps.20676] [Citation(s) in RCA: 92] [Impact Index Per Article: 5.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Abstract
Rapid advancement of the understanding of the structure and function of cell adhesion molecules (i.e., integrins, cadherins) has impacted the design and development of drugs (i.e., peptide, proteins) with the potential to treat cancer and heart and autoimmune diseases. For example, RGD peptides/peptidomimetics have been marketed as anti-thrombic agents and are being investigated for inhibiting tumor angiogenesis. Other cell adhesion peptides derived from ICAM-1 and LFA-1 sequences were found to block T-cell adhesion to vascular endothelial cells and epithelial cells; these peptides are being investigated for treating autoimmune diseases. Recent findings suggest that cell adhesion receptors such as integrins can internalize their peptide ligands into the intracellular space. Thus, many cell adhesion peptides (i.e., RGD peptide) were used to target drugs, particles, and diagnostic agents to a specific cell that has increased expression of cell adhesion receptors. This review is focused on the utilization of cell adhesion peptides and receptors in specific targeted drug delivery, diagnostics, and tissue engineering. In the future, more information on the mechanism of internalization and intracellular trafficking of cell adhesion molecules will be exploited for delivering drug molecules to a specific type of cell or for diagnosis of cancer and heart and autoimmune diseases.
Collapse
Affiliation(s)
- Alison L Dunehoo
- Department of Pharmaceutical Chemistry, The University of Kansas, Simons Research Laboratories, 2095 Constant Avenue, Lawrence, Kansas 66047, USA
| | | | | | | | | | | |
Collapse
|
1652
|
Wang TW, Wu HC, Huang YC, Sun JS, Lin FH. Biomimetic bilayered gelatin-chondroitin 6 sulfate-hyaluronic acid biopolymer as a scaffold for skin equivalent tissue engineering. Artif Organs 2006; 30:141-9. [PMID: 16480388 DOI: 10.1111/j.1525-1594.2006.00200.x] [Citation(s) in RCA: 58] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
In order to develop an adequate scaffold for skin tissue engineering, a bilayered gelatin-chondroitin 6 sulfate-hyaluronic acid membrane with a different pore size on either side was prepared. A rete ridges-like topographic microporous structure, which provided the paracrine crosstalk in the epithelial-mesenchymal interactions, was formed. Chondroitin-6-sulfate and hyaluronic acid were incorporated within the gelatin membrane to mimic skin composition and create an appropriate microenvironment for cell proliferation, differentiation, and migration. In the study, the lower layer of the membrane (pore size: 150 microm) was seeded with dermal fibroblasts and acted as the feeder layer for keratinocyte inoculation. Meanwhile, the upper layer (pore size: 20-50 microm) was seeded with keratinocytes for epidermalization. The dermal fibroblasts were dynamically seeded in a self-designed spinner flask for more even cell distribution. The keratinocytes were cultured in submerged conditions for 5 days and then in an air-liquid interface condition for further differentiation. After being cultured for 21 days, the upper layer, seeded with keratinocytes, developed into an epidermis-like structure while the lower part, which was seeded with dermal fibroblasts developed into a dermis-like structure. A histological examination and immunostain were used to prove that keratinocytes maintain their phenotype and stratified epidermis layers were formed within 21 days. In brief, the bilayered skin substitute with biological dermal analog and epidermal structure was successfully fabricated. From this study, we can suggest that the culture model is suitable for autologous skin equivalent preparation.
Collapse
Affiliation(s)
- Tzu-Wei Wang
- Institute of Biomedical Engineering, College of Medicine and College of Engineering, National Taiwan University, Taipei, Taiwan
| | | | | | | | | |
Collapse
|
1653
|
Li B, Chen J, Wang JHC. RGD peptide-conjugated poly(dimethylsiloxane) promotes adhesion, proliferation, and collagen secretion of human fibroblasts. J Biomed Mater Res A 2006; 79:989-98. [PMID: 16948145 DOI: 10.1002/jbm.a.30847] [Citation(s) in RCA: 84] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
Abstract
A novel technique for conjugating Arg-Gly-Asp (RGD) peptides to poly(dimethylsiloxane) (PDMS) surfaces as well as its application to cell culture is presented in this paper. This technique performs RGD conjugation to PDMS through photochemical immobilization of functional NHS groups to PDMS surface followed with linking RGD peptide to the surface via coupling reaction with NHS. A bifunctional photolinker, N-sulfosuccinimidyl-6-(4'-azido-2'-nitrophenylamino)hexanoate (sulfo-SANPAH), was used to conjugate RGD peptide to the surface. Compared to existing methods for peptide conjugation to PDMS, this technique is convenient, efficient, and free of organic contamination to PDMS surfaces. It can also be used to conjugate other peptides or proteins to most polymeric materials. In addition, cell culture studies showed that the RGD-conjugated PDMS surfaces promoted the adhesion, proliferation, and collagen production of human skin fibroblasts (HSFs). Finally, the RGD-conjugated PDMS surfaces are resistant to autoclaving and UV irradiation, which enables them to be repeatedly used in cell culture studies.
Collapse
Affiliation(s)
- Bin Li
- MechanoBiology Laboratory, Department of Orthopaedic Surgery, University of Pittsburgh, Pennsylvania 15213, USA
| | | | | |
Collapse
|
1654
|
Chada D, Mather T, Nollert MU. The synergy site of fibronectin is required for strong interaction with the platelet integrin alphaIIbbeta3. Ann Biomed Eng 2006; 34:1542-52. [PMID: 16933105 DOI: 10.1007/s10439-006-9161-1] [Citation(s) in RCA: 15] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/26/2005] [Accepted: 07/10/2006] [Indexed: 10/24/2022]
Abstract
Integrins are a class of cell adhesion molecules that bind to ligands containing the RGD peptide sequence. There is increasing evidence that peptide sites other than the RGD site are required for optimal binding of integrins with their ligands. We have examined the sites on the protein fibronectin that are needed for optimal binding to the platelet integrin alphaIIbbeta3 using a strategy of site directed mutagenesis. Single amino acids near the RGD site or near the synergy site of fibronectin were mutated and the resultant proteins were expressed in a bacterial expression system. The purified protein was coated onto glass cover slips. Platelets, expressing alphaIIbbeta3 were perfused over the surface at physiologically relevant shear rates and the extent of adhesion was quantified. We found that the single amino acid substitution of the aspartic acid in the RGD sequence, D1495A, completely abolished adhesion. Surprisingly, the mutants R1445A and R1448Q that are near the RGD site also abolished adhesion of platelets under flow. Additionally, the synergy site mutants R1371A, R1374Q, or R1379A displayed only minimal adhesion of platelets. These results show that the binding site for alphaIIbbeta3 on fibronectin extends over a considerable distance from the RGD site and that these distant sites are required for optimal attachment of cells in the presence of physiologically relevant shear stress.
Collapse
Affiliation(s)
- Diwakar Chada
- Department of Chemical, Biological, and Materials Engineering, University of Oklahoma, Norman, 73019-1004, USA
| | | | | |
Collapse
|
1655
|
Lutz JF, Börner HG, Weichenhan K. Combining ATRP and “Click” Chemistry: a Promising Platform toward Functional Biocompatible Polymers and Polymer Bioconjugates. Macromolecules 2006. [DOI: 10.1021/ma061557n] [Citation(s) in RCA: 246] [Impact Index Per Article: 13.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Affiliation(s)
- Jean-François Lutz
- Research Group Nanotechnology for Life Science, Fraunhofer Institute for Applied Polymer Research, Geiselbergstrasse 69, Golm 14476, Germany, and Colloid Department, Max Planck Institute of Colloids and Interfaces, 14424 Potsdam, Germany
| | - Hans G. Börner
- Research Group Nanotechnology for Life Science, Fraunhofer Institute for Applied Polymer Research, Geiselbergstrasse 69, Golm 14476, Germany, and Colloid Department, Max Planck Institute of Colloids and Interfaces, 14424 Potsdam, Germany
| | - Katja Weichenhan
- Research Group Nanotechnology for Life Science, Fraunhofer Institute for Applied Polymer Research, Geiselbergstrasse 69, Golm 14476, Germany, and Colloid Department, Max Planck Institute of Colloids and Interfaces, 14424 Potsdam, Germany
| |
Collapse
|
1656
|
Spatial Screening for the Identification of the Bioactive Conformation of Integrin Ligands. Top Curr Chem (Cham) 2006. [DOI: 10.1007/128_052] [Citation(s) in RCA: 46] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
|
1657
|
Li J, Yun H, Gong Y, Zhao N, Zhang X. Investigation of MC3T3-E1 cell behavior on the surface of GRGDS-coupled chitosan. Biomacromolecules 2006; 7:1112-23. [PMID: 16602728 DOI: 10.1021/bm050913r] [Citation(s) in RCA: 38] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
The GRGDS (Gly-Arg-Gly-Asp-Ser) peptide has intermediate affinity to alphaVbeta3 and alphaIIbbeta3, which are the integrins most reported to be involved in bone function. In this study, biomimetic chitosan films modified with GRGDS peptide were prepared and were used as a substrate for the in vitro culture of MC3T3-E1 cells in order to investigate the effect of GRGDS modification on MC3T3-E1 cell behavior. The results of electron spectroscopy for chemical analysis (ESCA), attenuated total reflection-Fourier transform infrared spectra (ATR-FTIR), and amino acid analysis (AAA) demonstrated that the chitosan films were successfully modified with GRGDS peptides and that the surface density of the immobilized GRGDS was on the order of 10(-9) mol/cm2. The immobilization of the GRGDS sequence on chitosan as well as the peptide concentration play a significant role in MC3T3-E1 cell behavior. MC3T3-E1 cell attachment, proliferation, migration, differentiation, and mineralization were remarkably greater on GRGDS-coupled chitosan than on unmodified chitosan. Besides, the degree of acceleration of these biological processes was found to be dependent on peptide density. Competitive inhibition of MC3T3-E1 cell attachment using soluble GRGDS peptides indicated that the interaction of MC3T3-E1 cells with the surface of the materials was ligand-specific. Cytoskeleton organization in the fully spread MC3T3-E1 cells was highly obvious on GRGDS-coupled chitosan when compared to the lack of actin fibers noted in the round MC3T3-E1 cells on unmodified chitosan. These results suggest that MC3T3-E1 cell function can be modulated, in a peptide density-dependent manner, by the immobilization of GRGDS peptide on chitosan used for scaffold-based bone tissue engineering.
Collapse
Affiliation(s)
- Jing Li
- Department of Biological Sciences and Biotechnology, State Key Laboratory of Biomembrane and Membrane Biotechnology, Tsinghua University, Beijing 100084, P. R. China
| | | | | | | | | |
Collapse
|
1658
|
Barber TA, Gamble LJ, Castner DG, Healy KE. In vitro characterization of peptide-modified p(AAm-co-EG/AAc) IPN-coated titanium implants. J Orthop Res 2006; 24:1366-76. [PMID: 16732610 DOI: 10.1002/jor.20165] [Citation(s) in RCA: 35] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Abstract
Interpenetrating polymer networks (IPNs) of poly(acrylamide-co-ethylene glycol/acrylic acid) [p(AAm-co-EG/AAc)] functionalized with an -Arg-Gly-Asp- containing peptide derived from rat bone sialoprotein [bsp-RGD(15)] were grafted to titanium implants in an effort to modulate osteoblast behavior in vitro. Surface characterization data were consistent with the presence of an IPN, and ligand density measurements established that the range of peptide density on the modified implants spanned three orders of magnitude (0.01-20 pmol/cm2). In vitro biological characterization of the modified implants employing the primary rat calvarial osteoblast (RCO) model resulted in the identification of a critical ligand density (0.01<Gammacrit<0.1 pmol/cm2) for maximal support of the osteoblast phenotype. After 14 and 21 days, mineralization was greater on the 0.1 and 10 pmol/cm2 bsp-RGD(15) modified implants compared to the base titanium and other control surfaces. The observed effects were attributed to specific interactions with bsp-RGD(15) and support the concept that peptide-modified implants can enhance the kinetics of differentiation of the cells they contact. These results suggest that in vivo biological performance evaluation of these biomimetic implant surfaces is merited.
Collapse
Affiliation(s)
- Thomas A Barber
- Department of Bioengineering, University of California at Berkeley, Berkeley, California 94720, USA
| | | | | | | |
Collapse
|
1659
|
Luo N, Zhang C, Hirt DE, Husson SM. Adsorption of fluorescently labeled protein residues on poly(ethylene-co-acrylic acid) films modified with affinity functionalities. Colloids Surf B Biointerfaces 2006; 50:89-96. [PMID: 16750613 DOI: 10.1016/j.colsurfb.2006.04.007] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/21/2006] [Revised: 03/30/2006] [Accepted: 04/19/2006] [Indexed: 11/25/2022]
Abstract
Poly(ethylene-co-acrylic acid) (EAA) films were reacted with glycine, 12-aminododecanoic acid, aspartic acid, 5-aminoisophthalic acid, ethanolamine, diethylamine, dimethylamine, N-isopropylamine, and dimethylaminoethyleneamine to prepare EAA films with negatively charged, non-charged, hydrophilic, and hydrophobic functionalities. Attenuated total reflectance Fourier transform infrared spectroscopy, differential scanning calorimetry, and contact angle measurements were used to characterize the modified EAA films. Analyses revealed that the films were modified on the surfaces and also in the bulk; therefore, bulk properties such as cohesive energy density were changed even though the surfaces remained hydrophobic. Adsorption studies were performed for two fluorescently labeled protein residues, dansyl-L-phenylalanine (dansyl-F) and dansyl-L-glutamine (dansyl-Q), from pH 7.4 buffer solutions. The adsorption results revealed that dimethylaminoethyleneamine functionality gave the highest uptake among the functionalities studied, and adsorption was more favorable for dansyl-F than dansyl-Q. Adsorption behavior is discussed in terms of hydrophobic-hydrophobic (dispersion) interactions and Coulombic interactions.
Collapse
Affiliation(s)
- Ning Luo
- Department of Chemical and Biomolecular Engineering and the Center for Advanced Engineering Fibers and Films, Clemson University, Clemson, SC 29634-0909, United States
| | | | | | | |
Collapse
|
1660
|
Li WJ, Jiang YJ, Tuan RS. Chondrocyte Phenotype in Engineered Fibrous Matrix Is Regulated by Fiber Size. ACTA ACUST UNITED AC 2006; 12:1775-85. [PMID: 16889508 DOI: 10.1089/ten.2006.12.1775] [Citation(s) in RCA: 169] [Impact Index Per Article: 9.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
Abstract
A biomaterial scaffold acting as a functional substitute for the native extracellular matrix provides space for cell accommodation. In this study, we seeded chondrocytes, isolated from 4- to 6-month-old calves, in 2 types of poly(L-lactide) scaffolds, composed of micro- and nanofibers, and compared the effects on cellular activities. Scanning electron microscopy revealed a well-spread morphology for chondrocytes grown on microfibers. In contrast, chondrocytes on the nanofibers were found to have a rounded morphology and displayed a disorganized actin cytoskeletal structure compared to the organized cytoskeleton seen in well-spread chondrocytes culture on the microfibrous scaffold. Both scaffolds supported chondrocyte proliferation, with a higher rate seen in cultures in nanofibrous scaffold. Quantitative reverse transcription-polymerase chain reaction analysis showed that both cultures supported expression of collagen types I and II and aggrecan. Biochemical analysis showed a higher level of sulfated glycosaminoglycan in the nanofiber culture, confirmed by more intense alcian blue histologic staining. The nanofiber cultures also showed higher immunostaining for collagen types II and IX, aggrecan, and cartilage proteoglycan link protein. Based on these results, we conclude that chondrocytes respond differently to fibrous scaffolds of varying diameters, and that the scaffolds made of nanofibrous biomaterial promote efficient cell-based cartilage tissue engineering.
Collapse
Affiliation(s)
- Wan-Ju Li
- Cartilage Biology and Orthopaedics Branch, National Institute of Arthritis and Musculoskeletal and Skin Diseases, National Institutes of Health, Department of Health and Human Services, Bethesda, MD 20892-8022, USA
| | | | | |
Collapse
|
1661
|
Lössner D, Kessler H, Thumshirn G, Dahmen C, Wiltschi B, Tanaka M, Knoll W, Sinner EK, Reuning U. Binding of Small Mono- and Oligomeric Integrin Ligands to Membrane-Embedded Integrins Monitored by Surface Plasmon-Enhanced Fluorescence Spectroscopy. Anal Chem 2006; 78:4524-33. [PMID: 16808462 DOI: 10.1021/ac052078+] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
We recently developed a binding assay format by incorporating native transmembrane receptors into artificial phospholipid bilayers on biosensor devices for surface plasmon resonance spectroscopy. By extending the method to surface plasmon-enhanced fluorescence spectroscopy (SPFS), sensitive recording of the association of even very small ligands is enabled. Herewith, we monitored binding of synthetic mono- and oligomeric RGD-based peptides and peptidomimetics to integrins alphavbeta3 and alphavbeta5, after having confirmed correct orientation and functionality of membrane-embedded integrins. We evaluated integrin binding of RGD multimers linked together via aminohexanoic acid (Ahx) spacers and showed that the dimer revealed higher binding activity than the tetramer, followed by the RGD monomers. The peptidomimetic was also found to be highly active with a slightly higher selectivity toward alphavbeta3. The different compounds were also evaluated in in vitro cell adhesion tests for their capacity to interfere with alphavbeta3-mediated cell attachment to vitronectin. We hereby demonstrated that the different RGD monomers were similarly effective; the RGD dimer and tetramer showed comparable IC50 values, which were, however, significantly higher than those of the monomers. Best cell detachment from vitronectin was achieved by the peptidomimetic. The novel SPFS-binding assay platform proves to be a suitable, reliable, and sensitive method to monitor the binding capacity of small ligands to native transmembrane receptors, here demonstrated for integrins.
Collapse
Affiliation(s)
- Daniela Lössner
- Klinische Forschergruppe der Frauenklinik der Technischen Universität München (TUM), 81675 München, Germany
| | | | | | | | | | | | | | | | | |
Collapse
|
1662
|
Bartold PM, Xiao Y, Lyngstaadas SP, Paine ML, Snead ML. Principles and applications of cell delivery systems for periodontal regeneration. Periodontol 2000 2006; 41:123-35. [PMID: 16686930 DOI: 10.1111/j.1600-0757.2006.00156.x] [Citation(s) in RCA: 77] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Affiliation(s)
- P Mark Bartold
- Colgate Australian Clinical Dental Research Centre, Dental School, University of Adelaide, Adelaide, South Australia, Australia
| | | | | | | | | |
Collapse
|
1663
|
Ghosh K, Ren XD, Shu XZ, Prestwich GD, Clark RAF. Fibronectin functional domains coupled to hyaluronan stimulate adult human dermal fibroblast responses critical for wound healing. ACTA ACUST UNITED AC 2006; 12:601-13. [PMID: 16579693 DOI: 10.1089/ten.2006.12.601] [Citation(s) in RCA: 150] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Abstract
Fibronectin (FN) facilitates dermal fibroblast migration during normal wound healing. Proteolytic degradation of FN in chronic wounds hampers healing. Previously, three FN functional domains (FNfd) have been shown to be sufficient for optimal adult human dermal fibroblast migration. Here we report the development of an acellular hydrogel matrix comprised of the FNfds coupled to a hyaluronan (HA) backbone to stimulate wound repair. Employing Michael-type addition, the cysteine- tagged FNfds were first coupled to a homobifunctional PEG derivative. Thereafter, these PEG derivative FNfd solutions, containing bifunctional PEG-derivative crosslinker were coupled to thiol-modified HA (HA-DTPH) to obtain a crosslinked hydrogel matrix. When evaluated in vitro, these acellular hydrogels were completely cytocompatible. While spreading and proliferation of adult human dermal fibroblasts plateaued at higher FNfd bulk densities, their rapid and robust migration followed a typical bell-shaped response. When implanted in porcine cutaneous wounds, these acellular matrices, besides being completely biocompatible, induced rapid and en masse recruitment of stromal fibroblasts that was not observed with RGD-tethered or unmodified hydrogels. Such constructs might be of great benefit in clinical settings where rapid formation of new tissue is needed.
Collapse
Affiliation(s)
- Kaustabh Ghosh
- Department of Biomedical Engineering, SUNY at Stony Brook, Stony Brook, New York 11794-8165, USA
| | | | | | | | | |
Collapse
|
1664
|
Lee Y, Sampson NS. Romping the cellular landscape: linear scaffolds for molecular recognition. Curr Opin Struct Biol 2006; 16:544-50. [PMID: 16781140 DOI: 10.1016/j.sbi.2006.05.015] [Citation(s) in RCA: 31] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/17/2006] [Revised: 05/03/2006] [Accepted: 05/30/2006] [Indexed: 11/25/2022]
Abstract
Multivalent molecules with a precise array of recognition elements that interact with specific cell types are important for characterizing the topology of molecules on a cell surface. Applications ranging from the control of cellular signaling to drug delivery and tissue imaging rely on these surface-mapping molecules. Linear polymers provide a molecular scaffold that is advantageous for these types of applications and their synthesis can be amenable to the introduction of different recognition elements. Recently, advances have been made in the development of synthetic approaches for preparing linear polymeric substrates with highly controlled lengths and recognition element spacing.
Collapse
Affiliation(s)
- Younjoo Lee
- Department of Chemistry, Stony Brook University, Stony Brook, NY 11794-3400, USA
| | | |
Collapse
|
1665
|
Larsen CC, Kligman F, Kottke-Marchant K, Marchant RE. The effect of RGD fluorosurfactant polymer modification of ePTFE on endothelial cell adhesion, growth, and function. Biomaterials 2006; 27:4846-55. [PMID: 16762410 PMCID: PMC2048534 DOI: 10.1016/j.biomaterials.2006.05.009] [Citation(s) in RCA: 87] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/14/2006] [Accepted: 05/10/2006] [Indexed: 11/28/2022]
Abstract
We have synthesized and characterized a novel peptide fluorosurfactant polymer (PFSP) modification that facilitates the adhesion and growth of endothelial cells on expanded polytetrafluoroetheylene (ePTFE) vascular graft material. This PFSP consists of a poly(vinyl amine) (PVAm) backbone with integrin binding Arg-Gly-Asp (RGD) peptides and perfluorocarbon pendant branches for adsorption and stable adhesion to underlying ePTFE. Aqueous PFSP solution was used to modify the surface of fluorocarbon substrates. Following subconfluent seeding, endothelial cell (EC) adhesion and growth on PFSP was assessed by determining cell population at different time points. Spectroscopic results indicated successful synthesis of PFSP. PFSP modification of ePTFE reduced the receding water contact angle measurement from 120 degrees to 6 degrees , indicating successful surface modification. Quantification of cell population demonstrated reduced EC attachment efficiency but increased growth rate on RGD PFSP compared with fibronectin (FN). Actin staining revealed a well-developed cytoskeleton for ECs on RGD PFSP indicative of stable adhesion. Uptake of acetylated low-density lipoprotein and positive staining for VE-Cadherin confirm EC phenotype for adherent cells. Production of prostacyclin, a potent antiplatelet agent, was equivalent between ECs on FN and RGD PFSP surfaces. Our results indicate successful synthesis and surface modification with PFSP; this is a simple, quantitative, and effective approach to modifying ePTFE to encourage endothelial cell attachment, growth, and function.
Collapse
Affiliation(s)
- Coby C. Larsen
- Department of Biomedical Engineering, Case Western Reserve University, 10900 Euclid Ave., Wickenden 319, Cleveland, OH 44106, USA
| | - Faina Kligman
- Department of Clinical Pathology, Cleveland Clinic Foundation, Cleveland, OH 44195, USA
| | - Kandice Kottke-Marchant
- Department of Biomedical Engineering, Case Western Reserve University, 10900 Euclid Ave., Wickenden 319, Cleveland, OH 44106, USA
- Department of Clinical Pathology, Cleveland Clinic Foundation, Cleveland, OH 44195, USA
| | - Roger E. Marchant
- Department of Biomedical Engineering, Case Western Reserve University, 10900 Euclid Ave., Wickenden 319, Cleveland, OH 44106, USA
- *Corresponding author. Tel.: +1-216-368-3005; fax: +1-216-368-4969 E-mail address: (R.E. Marchant)
| |
Collapse
|
1666
|
Harbers GM, Healy KE. The effect of ligand type and density on osteoblast adhesion, proliferation, and matrix mineralization. J Biomed Mater Res A 2006; 75:855-69. [PMID: 16121356 DOI: 10.1002/jbm.a.30482] [Citation(s) in RCA: 95] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Polystyrene surfaces grafted with a nonfouling interfacial interpenetrating polymer network (IPN) of poly(acrylamide-co-ethylene glycol/acrylic acid) [p(AAm-co-EG/AAc)] were modified with several peptide ligands adapted from bone sialoprotein (BSP). IPNs were modified with both single ligands and ligand blends to study the correlation between a simple metric, ligand-receptor adhesion strength, and the extent of matrix mineralization for osteoblast like cells (rat calvarial osteoblasts). The ligands studied included RGD cell-binding [CGGNGEPRGDTYRAY (l-RGD), CGGEPRGDTYRA (s2-RGD), CGPRGDTYG (lc-RGD), cyclic(CGPRGDTYG) (c-RGD), and CGGPRGDT (s-RGD)], heparin binding (CGGFHRRIKA), and collagen binding (CGGDGEAG) peptides, with the appropriate controls. Adhesion strength scaled with ligand density (1-20 pmol/cm(2)) and was dependent on ligand type with the following trend: l-RGD > s2-RGD approximately c-RGD >> s-RGD approximately lc-RGD >>> FHRRIKA approximately DGEA. Independent of ligand density, % matrix mineralization varied with ligand type resulting in the following trend: lc-RGD > s2-RGD > l-RGD approximately c-RGD >> s-RGD >>> FHRRIKA. The Tyr (Y) residue immediately following the RGD cell-binding domain proved to be critical for stable cell proliferation and mineralization, since removal of this residue resulted in erratic cell attachment and mineralization behavior. The minimum BSP sequence necessary for strong adhesion and extensive mineralization was CGGEPRGDTYRA; the minimal sequence suitable for extensive mineralization but lacking strong adhesion was CGPRGDTYG. The cyclic peptide (c-RGD) had much greater adhesion strength compared to its linear counterpart (lc-RGD). The calculated characteristic adhesion strength (F(70)) obtained using a centrifuge adhesion assay proved to be a poor metric for predicting % mineralized area; however, in general, surfaces possessing a F(70) > 100g promoted extensive matrix mineralization. Percent mineralization and number of mineralized nodules scaled with number of cells seeded suggesting a critical dependence on the initial number of osteoprogenitors in culture. This study demonstrates matrix mineralization dependence on ligand type, ligand density, and adhesion strength. The high-throughput character of these surfaces allowed efficient investigation of multiple ligands at multiple densities providing an excellent tool for studying ligand-receptor interactions under normal cell culture conditions with serum present.
Collapse
Affiliation(s)
- Gregory M Harbers
- Department of Biomedical Engineering, Northwestern University, 2145 Sheridan Road, Evanston, Illinois 60208-3107, USA
| | | |
Collapse
|
1667
|
Elloumi I, Kobayashi R, Funabashi H, Mie M, Kobatake E. Construction of epidermal growth factor fusion protein with cell adhesive activity. Biomaterials 2006; 27:3451-8. [PMID: 16497372 DOI: 10.1016/j.biomaterials.2006.02.003] [Citation(s) in RCA: 50] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/06/2005] [Accepted: 02/02/2006] [Indexed: 11/30/2022]
Abstract
A novel protein for controlling cellular functions was constructed by combining functional units of various proteins. The Arg-Gly-Asp (RGD) sequence functioning as a cell adhesive function, an epidermal growth factor (EGF) as a cell growth function, and a hydrophobic sequence (E12) as an efficient assembling function, were combined and incorporated into one molecule. The fusion protein, designated ERE-EGF, was produced in Escherichia coli and purified with affinity chromatography using a His-tag. The ERE-EGF coated on an unmodified hydrophobic surface of a cell-culture plate (through the hydrophobic E12 moiety) retained both cell adhesive activity (through the RGD sequence) and cell growth activity (through the EGF moiety).
Collapse
Affiliation(s)
- Imen Elloumi
- Department of Biological Information, Graduate School of Bioscience and Biotechnology, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku, Yokohama 226-8501, Japan
| | | | | | | | | |
Collapse
|
1668
|
Harris BP, Kutty JK, Fritz EW, Webb CK, Burg KJL, Metters AT. Photopatterned polymer brushes promoting cell adhesion gradients. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2006; 22:4467-71. [PMID: 16649749 DOI: 10.1021/la053417x] [Citation(s) in RCA: 56] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/08/2023]
Abstract
The ability to spatially control cellular adhesion in a continuous manner on a biocompatible substrate is an important factor in designing new biomaterials for use in wound healing and tissue engineering applications. In this work, a novel method of engineering cell-adhesive RGD-ligand density gradients to control specific cell adhesion across a substrate is presented. Polymer brushes exhibiting spatially defined gradients in chain density are created and subsequently functionalized with RGD to create ligand density gradients capable of inducing cell adhesion on an otherwise weakly adhesive substrate. Cell studies indicate that these ligand-functionalized surfaces are noncytotoxic, with cellular adhesion increasing with RGD-ligand density across the gradient brush surface.
Collapse
Affiliation(s)
- Bradley P Harris
- Department of Chemical and Biomolecular Engineering, Clemson University, Clemson, South Carolina 29634, USA
| | | | | | | | | | | |
Collapse
|
1669
|
Thompson MT, Berg MC, Tobias IS, Lichter JA, Rubner MF, Van Vliet KJ. Biochemical Functionalization of Polymeric Cell Substrata Can Alter Mechanical Compliance. Biomacromolecules 2006; 7:1990-5. [PMID: 16768424 DOI: 10.1021/bm060146b] [Citation(s) in RCA: 48] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Biochemical functionalization of surfaces is an increasingly utilized mechanism to promote or inhibit adhesion of cells. To promote mammalian cell adhesion, one common functionalization approach is surface conjugation of adhesion peptide sequences such as Arg-Gly-Asp (RGD), a ligand of transmembrane integrin molecules. It is generally assumed that such functionalization does not alter the local mechanical properties of the functionalized surface, as is important to interpretations of macromolecular mechanotransduction in cells. Here, we examine this assumption systematically, through nanomechanical measurement of the nominal elastic modulus of polymer multilayer films of nanoscale thickness, functionalized with RGD through different processing routes. We find that the method of biochemical functionalization can significantly alter mechanical compliance of polymeric substrata such as weak polyelectrolyte multilayers (PEMs), increasingly utilized materials for such studies. In particular, immersed adsorption of intermediate functionalization reagents significantly decreases compliance of the PEMs considered herein, whereas polymer-on-polymer stamping of these same reagents does not alter compliance of weak PEMs. This finding points to the potential unintended alteration of mechanical properties via surface functionalization and also suggests functionalization methods by which chemical and mechanical properties of cell substrata can be controlled independently.
Collapse
Affiliation(s)
- M Todd Thompson
- Department of Materials Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, USA
| | | | | | | | | | | |
Collapse
|
1670
|
Auernheimer J, Haubner R, Schottelius M, Wester HJ, Kessler H. Radio-Analytical Determination of the Coating Efficiency of Cyclic RGD Peptides. Helv Chim Acta 2006. [DOI: 10.1002/hlca.200690085] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
|
1671
|
Clements BA, Bai J, Kucharski C, Farrell LL, Lavasanifar A, Ritchie B, Ghahary A, Uludag H. RGD Conjugation to Polyethyleneimine Does Not Improve DNA Delivery to Bone Marrow Stromal Cells. Biomacromolecules 2006; 7:1481-8. [PMID: 16677029 DOI: 10.1021/bm060073w] [Citation(s) in RCA: 30] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Bone marrow stromal cells (BMSC) modified with therapeutic genes are being actively pursued for gene therapy protocols. To develop safe and effective nonviral methods for BMSC modification, the cationic polymer polyethyleneimine (PEI) has been utilized to condense plasmid DNA for intracellular delivery. This study was conducted to explore the feasibility of increasing the PEI's effectiveness by coupling integrin-binding arginine-glycine-aspartic acid (RGD) peptides to the polymer. BMSC from rats were isolated and expanded in culture for gene transfer studies. In contrast to our expectations, RGD-conjugated PEI did not exhibit an enhanced binding to BMSC. This was the case where the peptides were conjugated to PEI by short, disulfide linkages or long poly(ethylene glycol) linkages. Using a reporter gene for the enhanced green fluorescent protein, the transfection efficiency of RGD-conjugated PEI was also lower than the delivery by the native PEI, which exhibited equivalent transfection efficiency to that of an adenovirus. We conclude that native PEI was sufficient for the transformation of BMSC and that coupling of the integrin-binding RGD-peptides did not improve the effectiveness of this polymer for BMSC transfection.
Collapse
Affiliation(s)
- Basak Açan Clements
- Department of Chemical and Materials Engineering, Faculty of Engineering, University of Alberta, Edmonton, Alberta T6G 2G6, Canada
| | | | | | | | | | | | | | | |
Collapse
|
1672
|
Trimpert C, Boese G, Albrecht W, Richau K, Weigel T, Lendlein A, Groth T. Poly(ether imide) Membranes Modified with Poly(ethylene imine) as Potential Carriers for Epidermal Substitutes. Macromol Biosci 2006; 6:274-84. [PMID: 16565943 DOI: 10.1002/mabi.200500238] [Citation(s) in RCA: 40] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Abstract
Poly(ether imide) (PEI) membranes were modified with a linear low-molecular weight (PETIM_0.6) and a branched high-molecular weight poly(ethylene imine) (PETIM_60). The membrane surfaces became more hydrophilic and the zeta potentials were shifted from negative to positive zeta values after immobilisation of both PETIM. These measurements also indicated the presence of a swollen surface layer in the case of PETIM_60, while a regular structuring of the surface was observed with scanning force microscopy for PETIM_0.6. A human keratinocyte cell line HaCaT was cultured on the different membranes. It was found that HaCaT cell growth was stimulated by PETIM_0.6. Cells reached earlier confluence on this substratum, while their growth was inhibited on a PEI membrane modified with PETIM_60, which makes PEI membranes modified with PETIM_0.6 a promising material for in vitro culture of epidermal transplants.
Collapse
Affiliation(s)
- Christiane Trimpert
- GKSS Research Centre, Institute of Polymer Research, Kantstrasse 55, D-14513 Teltow, Germany
| | | | | | | | | | | | | |
Collapse
|
1673
|
Franchini J, Ranucci E, Ferruti P, Rossi M, Cavalli R. Synthesis, Physicochemical Properties, and Preliminary Biological Characterizations of a Novel Amphoteric Agmatine-Based Poly(amidoamine) with RGD-Like Repeating Units. Biomacromolecules 2006; 7:1215-22. [PMID: 16602741 DOI: 10.1021/bm060054m] [Citation(s) in RCA: 52] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
A linear, amphoteric poly(amidoamine) nicknamed AGMA1, based on 4-aminobutylguanidine, or agmatine, was successfully prepared by Michael-type polyaddition of monoprotonated agmatine and 2,2-bis(acrylamido)acetic acid (BAC). Copolymers between AGMA1 and the biocompatible poly(amidoamine) ISA23 (deriving from the polyaddition of 2-methylpiperazine with BAC) were also prepared. Acid-base titrations gave for AGMA1 three acid dissociation constants, with pKa values of 2.25, 7.45, and >or=12.1, corresponding to a strong acid, a medium-weak base, and a strong base, respectively. The charge distribution profiles show that this polymer is prevailingly cationic at all physiological pH values, the positive net average charge per unit varying from about 0.5 at pH 7.4 to about 1.0 at pH 5, with an isoelectric point at pH approximately 10. Zeta-potential measurements confirmed this. Despite that, AGMA1 is nontoxic and nonhemolytic in vitro within all pH ranges tested (4-7.5). This is in contrast with the previously observed behavior of amphoteric PAAs, for instance ISA23, that are weakly hemolytic at pH 7.4 but highly hemolytic at pH 5/5.5. The lack of hemolytic activity of AGMA1 even at acidic pH values seems typical of the agmatine-BAC sequences and may be ascribed to their RGD-like structure. In fact, AGMA1-ISA23 copolymers behave in a way increasingly similar to that of ISA23; that is, they become hemolytic at low pH values as their ISA23 content increases.
Collapse
Affiliation(s)
- Jacopo Franchini
- Dipartimento di Chimica Organica e Industriale, Università di Milano, via Venezian 21, 20133 Milano, Italy
| | | | | | | | | |
Collapse
|
1674
|
Paguirigan A, Beebe DJ. Gelatin based microfluidic devices for cell culture. LAB ON A CHIP 2006; 6:407-13. [PMID: 16511624 DOI: 10.1039/b517524k] [Citation(s) in RCA: 76] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/06/2023]
Abstract
We have developed a technique for fabricating microfluidic devices from gelatin using a natural crosslinking process. Gelatin, crosslinked with the naturally occurring enzyme transglutaminase is molded to produce microchannels suitable for adherent cell culture and analysis. The autofluorescence of the material was shown to be minimal and within the range of typical background, ensuring utility with analyses using fluorescent dyes and labels would not be affected. Also, normal murine mammary epithelial cells were successfully cultured in the microchannels. The morphology of these adherent epithelial cells was shown to be significantly different for cells grown on rigid tissue culture plastic in either macro- or microscale cultures (even in the presence of a surface coating of gelatin) than those grown on the flexible crosslinked gelatin microchannels. Using these devices, the effects of both the extracellular matrix and soluble factors on cellular behavior and differentiation can be studied in microenvironments that more closely mimic the in vivo environment.
Collapse
Affiliation(s)
- A Paguirigan
- Engineering Centers Bldg., 1550 Engineering Dr., Madison, WI 53704, USA
| | | |
Collapse
|
1675
|
Gambino GL, Grassi A, Marletta G. Molecular Modeling of Interactions between l-Lysine and Functionalized Quartz Surfaces. J Phys Chem B 2006; 110:4836-45. [PMID: 16526721 DOI: 10.1021/jp0508610] [Citation(s) in RCA: 23] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
Molecular modeling techniques have been used to investigate the interaction of L-lysine in aqueous medium with silanol and methyl sites onto quartz substrates. The substrate effect has been studied for partially hydrophilic surfaces formed by silanol and methyl groups with a ratio of 1:5 and hydrophobic fully methylated surfaces. Molecular dynamics and static calculations indicate that L-lysine does not show any significant interaction with fully methylated surfaces, while its interaction with hydroxylated/methylated surfaces is dominated by electrostatic and H-bond terms. Accordingly, on fully methylated surfaces there is no preferential orientation of L-lysine with respect to the surface, while for hydroxylated/methylated surfaces the L-lysine-surface interaction mainly depends on the molecular orientation, with a preferred geometry involving the ammonium group pointing toward the silanol site. The structure of water shells around L-lysine molecules was shown to be strongly affected by the relative hydrophilic/hydrophobic character of the surfaces. In particular, the order is almost completely lost for partially hydrophilic surfaces, while well-defined hydration shells around L-lysine are obtained for hydrophobic surfaces.
Collapse
Affiliation(s)
- G Laura Gambino
- Dipartimento di Scienze Chimiche, Viale Andrea Doria 6, University of Catania, I-95125 Catania, Italy
| | | | | |
Collapse
|
1676
|
Boland GM, Weigel RJ. Formation and prevention of postoperative abdominal adhesions. J Surg Res 2006; 132:3-12. [PMID: 16457846 DOI: 10.1016/j.jss.2005.12.002] [Citation(s) in RCA: 148] [Impact Index Per Article: 8.2] [Reference Citation Analysis] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/03/2005] [Revised: 11/15/2005] [Accepted: 12/06/2005] [Indexed: 01/17/2023]
Affiliation(s)
- Genevieve M Boland
- Department of Surgery, Thomas Jefferson University, Philadelphia, Pennsylvania, USA
| | | |
Collapse
|
1677
|
Kim TG, Park TG. Biomimicking Extracellular Matrix: Cell Adhesive RGD Peptide Modified Electrospun Poly(D,L-lactic-co-glycolic acid) Nanofiber Mesh. ACTA ACUST UNITED AC 2006; 12:221-33. [PMID: 16548681 DOI: 10.1089/ten.2006.12.221] [Citation(s) in RCA: 243] [Impact Index Per Article: 13.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022]
Abstract
A cell adhesive peptide, Arg-Gly-Asp (RGD), was immobilized onto the surface of electrospun poly(D,L-lactic-co-glycolic acid) PLGA nanofiber mesh in an attempt to mimic an extracellular matrix structure. A blend mixture of PLGA and PLGA-b-PEG-NH(2) di-block copolymer dissolved in a 1:1 volume mixture of dimethylformamide and tetrahydrofuran was electrospun to produce a nanofiber mesh with functional primary amino groups on the surface. Various electrospinning parameters, such as polymer concentration and the blend ratio, were optimized to produce a nanofiber mesh with desirable morphology, surface characteristics, and fiber diameter. A cell adhesive peptide, GRGDY, was covalently grafted onto the aminated surface of the electrospun mesh under a hydrating condition. The amounts of surface primary amino groups and grafted RGD peptides were quantitatively determined. Cell attachment, spreading, and proliferation were greatly enhanced in the RGD modified electrospun PLGA nanofiber mesh compared with that of the unmodified one.
Collapse
Affiliation(s)
- Taek Gyoung Kim
- Department of Biological Sciences, Korea Advanced Institute of Science and Technology, Daejeon, South Korea
| | | |
Collapse
|
1678
|
|
1679
|
Dirksen A, Meijer EW, Adriaens W, Hackeng TM. Strategy for the synthesis of multivalent peptide-based nonsymmetric dendrimers by native chemical ligation. Chem Commun (Camb) 2006:1667-9. [PMID: 16583014 DOI: 10.1039/b600286b] [Citation(s) in RCA: 41] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
A strategy for the synthesis of multivalent peptide-based nonsymmetric dendrimers by native chemical ligation using poly(lysine) dendritic wedges as scaffolds is presented.
Collapse
Affiliation(s)
- Anouk Dirksen
- Laboratory of Macromolecular and Organic Chemistry, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, The Netherlands
| | | | | | | |
Collapse
|
1680
|
Sun H, Önneby S. Facile polyester surface functionalization via hydrolysis and cell-recognizing peptide attachment. POLYM INT 2006. [DOI: 10.1002/pi.2090] [Citation(s) in RCA: 37] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|
1681
|
Sunderland CJ, Steiert M, Talmadge JE, Derfus AM, Barry SE. Targeted nanoparticles for detecting and treating cancer. Drug Dev Res 2006. [DOI: 10.1002/ddr.20069] [Citation(s) in RCA: 183] [Impact Index Per Article: 10.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
|
1682
|
Balasundaram G, Webster TJ. A perspective on nanophase materials for orthopedic implant applications. ACTA ACUST UNITED AC 2006. [DOI: 10.1039/b604966b] [Citation(s) in RCA: 109] [Impact Index Per Article: 6.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
1683
|
Chapter 1 Scope of Tissue Engineering. ACTA ACUST UNITED AC 2006. [DOI: 10.1016/s1573-4285(06)80003-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register]
|
1684
|
Ciardelli G, Rechichi A, Sartori S, D'Acunto M, Caporale A, Peggion E, Vozzi G, Giusti P. Bioactive polyurethanes in clinical applications. POLYM ADVAN TECHNOL 2006. [DOI: 10.1002/pat.781] [Citation(s) in RCA: 28] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
|
1685
|
Taniguchi I, Kuhlman WA, Mayes AM, Griffith LG. Functional modification of biodegradable polyesters through a chemoselective approach: application to biomaterial surfaces. POLYM INT 2006. [DOI: 10.1002/pi.2139] [Citation(s) in RCA: 36] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|
1686
|
Hatakeyama H, Kikuchi A, Yamato M, Okano T. Bio-functionalized surface designs necessary for applications in regenerative medicine. Inflamm Regen 2006. [DOI: 10.2492/inflammregen.26.437] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022] Open
|
1687
|
Pallu S, Bourget C, Bareille R, Labrugère C, Dard M, Sewing A, Jonczyk A, Vernizeau M, Christine Durrieu M, Amédée-Vilamitjana J. The effect of cyclo-DfKRG peptide immobilization on titanium on the adhesion and differentiation of human osteoprogenitor cells. Biomaterials 2005; 26:6932-40. [PMID: 15950276 DOI: 10.1016/j.biomaterials.2005.04.054] [Citation(s) in RCA: 28] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/22/2004] [Accepted: 04/20/2005] [Indexed: 11/30/2022]
Abstract
This study takes place in the field of development of a bioactive surface of titanium alloys. In this paper, titanium was functionalized with cyclo-DfKRG peptide by coating or grafting using different anchors (thiol or phosphonate) as spacers between the surface and the peptide. Cell adhesion, and differentiation of human osteoprogenitor (HOP) cells arising from human bone marrow were investigated. Our results seem to demonstrate that cyclo-DfKRG peptide coating with a phosphonate anchor and grafting procedure contributes to higher cell adhesion and a strong ALP and Cbfa1 mRNA expression, after 10 days of cell seeding. At the contrary, this peptide coated with a thiol anchor stimulates differentiation of HOP within 3 days of culture.
Collapse
Affiliation(s)
- Stéphane Pallu
- INSERM, U577, Université Victor Segalen, Bordeaux, France.
| | | | | | | | | | | | | | | | | | | |
Collapse
|
1688
|
Sawyer AA, Weeks DM, Kelpke SS, McCracken MS, Bellis SL. The effect of the addition of a polyglutamate motif to RGD on peptide tethering to hydroxyapatite and the promotion of mesenchymal stem cell adhesion. Biomaterials 2005; 26:7046-56. [PMID: 15964067 DOI: 10.1016/j.biomaterials.2005.05.006] [Citation(s) in RCA: 55] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/04/2005] [Accepted: 05/05/2005] [Indexed: 01/16/2023]
Abstract
Mimicking endogenous bone-binding proteins, RGD peptides have been synthesized with polyacidic amino acid domains in order to ionically tether the peptides to bone-like synthetic biomaterials, including hydroxyapatite (HA). However, a direct comparison of unmodified RGD with polyacidic-conjugated RGD has not been performed, and thus a benefit for the acidic domain has not been established. We evaluated the peptide/HA bond of RGD peptides with and without an attached polyglutamate sequence (E(7)), as well as examined mesenchymal stem cell (MSC) adhesion and morphology as they were affected by the conjugated peptide. We found that significantly more E(7)RGD was bound to HA than RGD at all coating concentrations tested, and moreover, more E(7)RGD was retained on the HA surface even after extended washing in serum-free media. Consistent with in vitro results, higher levels of E(7)RGD than RGD remained on HA that had been implanted in vivo for 24 h, indicating that the polyacidic domain improved peptide-binding efficiency. At several peptide concentrations, E(7)RGD increased cell adhesion compared to RGD surfaces, establishing a biological benefit for the E(7) modification. In addition, HA pre-coated sequentially with low-density E(7)RGD (1-10 microg/ml) and serum (FBS) stimulated cell adhesion and spreading, compared to either coating alone, suggesting that an ionic linkage allows for the potential adsorption of serum proteins to unoccupied sites, which may be important for bone formation in vivo. Collectively, these results suggest that tethering peptides to HA via a polyglutamate domain is an effective method for improving the peptide/HA bond, as well as for enhancing MSC adhesion.
Collapse
Affiliation(s)
- A A Sawyer
- Department of Biomedical Engineering, University of Alabama at Birmingham, 35294, USA
| | | | | | | | | |
Collapse
|
1689
|
Qu XH, Wu Q, Liang J, Qu X, Wang SG, Chen GQ. Enhanced vascular-related cellular affinity on surface modified copolyesters of 3-hydroxybutyrate and 3-hydroxyhexanoate (PHBHHx). Biomaterials 2005; 26:6991-7001. [PMID: 15998539 DOI: 10.1016/j.biomaterials.2005.05.034] [Citation(s) in RCA: 112] [Impact Index Per Article: 5.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/25/2005] [Accepted: 05/11/2005] [Indexed: 12/31/2022]
Abstract
Random copolyester of 3-hydroxybutyrate and 3-hydroxyhexanoate, short as PHBHHx, was surface modified by ammonia plasma treatment and/or fibronectin coating, respectively. The improved results were demonstrated by better growth of human umbilical vein endothelial cells (HUVECs) and rabbit aorta smooth muscle cells (SMCs) on the surface of ammonia plasma-treated PHBHHx coated with fibronectin (PFn-PHBHHx), compared with the fibronectin-coated (Fn-PHBHHx) or uncoated PHBHHx, respectively, although XPS analysis and ELISA demonstrated higher fibronectin adsorption on Fn-PHBHHx than on PFn-PHBHHx. Confocal microscopy observation showed that the specific co-localization of fibronectin with F-actin was impaired on PFn-PHBHHx, while it was almost lost on Fn-PHBHHx compared with pristine PHBHHx or plasma-treated PHBHHx (P-PHBHHx). These were attributed to the generation of new nitrogen- and oxygen-containing groups on the PHBHHx surface by the ammonia plasma treatment, which led to increased polar components that enhanced polymer surface energy and hydrophilic properties on P-PHBHHx. The most prominent effect of PFn-PHBHHx was its stimulation of HUVECs proliferation. HUVECs on PFn-PHBHHx formed a confluent monolayer after 3 days of incubation, while SMCs were unable to form a sub-confluent layer. The above evidences revealed that PFn-PHBHHx would benefit endotheliazation rather than SMCs proliferation. We therefore believed that PFn-PHBHHx would be a promising material as a luminal surface of vascular grafts.
Collapse
Affiliation(s)
- Xiang-Hua Qu
- Department of Biological Science and Biotechnology, Tsinghua University, Beijing, China
| | | | | | | | | | | |
Collapse
|
1690
|
Salvay DM, Shea LD. Inductive tissue engineering with protein and DNA-releasing scaffolds. MOLECULAR BIOSYSTEMS 2005; 2:36-48. [PMID: 16880921 PMCID: PMC2657198 DOI: 10.1039/b514174p] [Citation(s) in RCA: 45] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Abstract
Cellular differentiation, organization, proliferation and apoptosis are determined by a combination of an intrinsic genetic program, matrix/substrate interactions, and extracellular cues received from the local microenvironment. These molecular cues come in the form of soluble (e.g. cytokines) and insoluble (e.g. ECM proteins) factors, as well as signals from surrounding cells that can promote specific cellular processes leading to tissue formation or regeneration. Recent developments in the field of tissue engineering have employed biomaterials to present these cues, providing powerful tools to investigate the cellular processes involved in tissue development, or to devise therapeutic strategies based on cell replacement or tissue regeneration. These inductive scaffolds utilize natural and/or synthetic biomaterials fabricated into three-dimensional structures. This review summarizes the use of scaffolds in the dual role of structural support for cell growth and vehicle for controlled release of tissue inductive factors, or DNA encoding for these factors. The confluence of molecular and cell biology, materials science and engineering provides the tools to create controllable microenvironments that mimic natural developmental processes and direct tissue formation for experimental and therapeutic applications.
Collapse
Affiliation(s)
- David M. Salvay
- Department of Chemical and Biological Engineering, 2145 Sheridan Rd E156 Evanston, IL 60208-3120. E-mail: ; Fax: 847-491-3728; Tel: 847-491-7043
| | - Lonnie D. Shea
- Department of Chemical and Biological Engineering, 2145 Sheridan Rd E156 Evanston, IL 60208-3120. E-mail: ; Fax: 847-491-3728; Tel: 847-491-7043
- Department of Biomedical Engineering, Northwestern University, 2145 Sheridan Rd E156 Evanston, IL 60208-3120
| |
Collapse
|
1691
|
Yang J, Webb AR, Pickerill SJ, Hageman G, Ameer GA. Synthesis and evaluation of poly(diol citrate) biodegradable elastomers. Biomaterials 2005; 27:1889-98. [PMID: 16290904 DOI: 10.1016/j.biomaterials.2005.05.106] [Citation(s) in RCA: 232] [Impact Index Per Article: 12.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/16/2005] [Accepted: 05/27/2005] [Indexed: 02/06/2023]
Abstract
Herein, we report the synthesis and evaluation of a novel family of biodegradable and elastomeric polyesters, poly(diol citrates). Poly(diol citrates) were synthesized by reacting citric acid with various diols to form a covalent cross-linked network via a polycondensation reaction without using exogenous catalysts. The tensile strength of poly(diol citrates) were as high as 11.15+/-2.62 MPa and Young's modulus ranged from 1.60+/-0.05 to 13.98+/-3.05 MPa under the synthesis conditions that were investigated. Elongation was as high as 502+/-16%. No permanent deformation was found during mechanical tests. The equilibrium water-in-air contact angles of measured poly(diol citrates) films ranged from 15 degrees to 53 degrees . The mechanical properties, degradation and surface characteristics of poly(diol citrates) could be controlled by choosing different diols as well as by controlling the cross-link density of the polyester network. Various types of poly(diol citrate) scaffolds were fabricated to demonstrate their processing potential. These scaffolds were soft and could recover from deformation. In vitro and in vivo evaluation using cell culture and subcutaneous implantation, respectively, confirmed cell and tissue compatibility. The introduction of poly(diol citrates) will expand the repertoire of currently available biodegradable polymeric elastomers and should help meet the requirements of tissue engineering applications.
Collapse
Affiliation(s)
- Jian Yang
- Biomedical Engineering Department, Northwestern University, Evanston, IL 60208, USA
| | | | | | | | | |
Collapse
|
1692
|
De Bartolo L, Morelli S, Gallo MC, Campana C, Statti G, Rende M, Salerno S, Drioli E. Effect of isoliquiritigenin on viability and differentiated functions of human hepatocytes maintained on PEEK-WC–polyurethane membranes. Biomaterials 2005; 26:6625-34. [PMID: 15927248 DOI: 10.1016/j.biomaterials.2005.04.021] [Citation(s) in RCA: 32] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/19/2005] [Accepted: 04/07/2005] [Indexed: 11/27/2022]
Abstract
In this study, we tested the ability of microporous membranes synthesised from a polymeric blend of modified polyetheretherketone (PEEK-WC) and polyurethane (PU) to support long-term maintenance and differentiation of human liver cells. The effect of isoliquiritigenin (ISL), which is a component of liquorice extract, exhibiting growth stimulatory and antiproliferative dose-dependent effect was investigated by comparing cultures treated with ISL with those untreated. To this purpose, flat-sheet membranes were prepared by a blend of PEEK-WC and PU polymers by phase inverse technique. The morphological and physico-chemical properties were characterised, respectively, by scanning electron microscopy and water contact angle measurements. Human hepatocytes cultured on PEEK-WC-PU membranes were constant up to 1 month albumin production and urea synthesis as well as the synthesis of total proteins. The liver-specific functions were expressed at high levels when cells were cultured on membranes with respect to collagen. Also the biotransformation functions were maintained for all culture periods: the ISL elimination rate increased during the culture time and high values were measured up to 22 days. Thereafter, a decrease was observed. ISL stimulated the proliferation of hepatocytes cultured on both substrata but did not affect their liver-specific functions. Hepatocytes cultured on PEEK-WC-PU membranes responded very well to ISL and expressed high levels of P450 cytochrome. These results demonstrated that long-term maintenance of human liver differentiation can be achieved on PEEK-WC-PU membranes. The incubation with ISL at the investigated concentration could stimulate the proliferation of human hepatocytes in biohybrid systems.
Collapse
Affiliation(s)
- Loredana De Bartolo
- Institute on Membrane Technology, National Research Council of Italy, ITM-CNR, c/o University of Calabria, via P. Bucci cubo 17/C, 87030 Rende (CS), Italy.
| | | | | | | | | | | | | | | |
Collapse
|
1693
|
Ernsting MJ, Bonin GC, Yang M, Labow RS, Santerre JP. Generation of cell adhesive substrates using peptide fluoralkyl surface modifiers. Biomaterials 2005; 26:6536-46. [PMID: 15993486 DOI: 10.1016/j.biomaterials.2005.04.047] [Citation(s) in RCA: 31] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/11/2004] [Accepted: 04/13/2005] [Indexed: 11/23/2022]
Abstract
Previous studies reported on the delivery of vitamin E to the surface of a polycarbonate polyurethane (PCNU) to produce antioxidant surfaces, using a bioactive fluorinated surface modifer (BFSM). In the current report, a cell adhesive peptide sequence was coupled to the BFSM, and when blended into PCNU, generated a cell adhesive substrate. An NH2-GK*GRGD-CONH2 peptide sequence (referred to as RGD) with a dansyl label (*) on the lysine residue was coupled via the N-terminal to a BFSM precursor molecule. The resulting RGD BFSM was purified and the pmol peptide/mg BFSM value was assayed by amino acid quantification. The migration of the RGD BFSM in a PCNU blend was confirmed by X-ray photoelectron spectroscopy analysis. U937 macrophage-like cells and human monocytes were seeded onto the PCNU and blends of PCNU with non-bioactive fluorinated surface modifier or the RGD BFSM, in order to study the cell response. Both U937 cells and human monocytes adhered in greater numbers to the RGD BFSM substrate when compared to unmodified PCNU or the blend of PCNU with the non-bioactive fluorinated surface modifying macromolecule substrate. The study demonstrated a novel approach for the introduction of peptides onto the surface of polymers by modifying the surface from within the polymer as opposed to the use of cumbersome post-surface modification techniques. The generation of a peptide substrate points to the possibility of producing complex bioactive surfaces using various peptide BFSMs or pharmaceuticals simultaneously to manipulate cell functions.
Collapse
Affiliation(s)
- Mark J Ernsting
- Institute for Biomaterials and Biomedical Engineering, University of Toronto, Toronto, Ont., Canada
| | | | | | | | | |
Collapse
|
1694
|
Auernheimer J, Dahmen C, Hersel U, Bausch A, Kessler H. Photoswitched Cell Adhesion on Surfaces with RGD Peptides. J Am Chem Soc 2005; 127:16107-10. [PMID: 16287297 DOI: 10.1021/ja053648q] [Citation(s) in RCA: 196] [Impact Index Per Article: 10.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Coating of surfaces by RGD peptides is well-known. Herein we describe the possibility to switch cell adhesion properties by changing the distance and orientation of the RGD peptides to the surface. A set of RGD peptides of the type cyclo(-RGDfK-) was synthesized containing the photoswitchable 4-[(4-aminophenyl)azo]benzocarbonyl central unit as spacer between the acrylamide anchor and the RGD peptide. PMMA (poly methyl methacrylate) surfaces were coated with these peptides. Control of adhesion stimulation by irradiation with 366 or 450 nm light could be achieved.
Collapse
Affiliation(s)
- Jörg Auernheimer
- Department Chemie, Lehrstuhl II für Organische Chemie, Technische Universität München, Lichtenbergstr. 4, D-85747 Garching, Germany
| | | | | | | | | |
Collapse
|
1695
|
Kurihara H, Morita T, Shinkai M, Nagamune T. Recombinant extracellular matrix-like proteins with repetitive elastin or collagen-like functional motifs. Biotechnol Lett 2005; 27:665-70. [PMID: 15977075 DOI: 10.1007/s10529-005-4477-8] [Citation(s) in RCA: 16] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/06/2005] [Revised: 03/08/2005] [Accepted: 03/18/2005] [Indexed: 11/27/2022]
Abstract
Using overlap elongation PCR, we created repetitive DNA libraries encoding the elastin VPGVG and collagen-like GERGDRGDP sequences. From these libraries we isolated two repetitive DNA sequences, Col-5 encoding [(GERGDRGDP)(5)GER], and Ela-16 encoding [(VPGVG)(16)VPG]. Both proteins were expressed as thioredoxin fusion proteins. The resulting recombinant extracellular matrix-like proteins had the expected properties (cell adhesive ability and thermally responsive structural change) of the functional motif sequence unit used.
Collapse
Affiliation(s)
- Hiroyuki Kurihara
- School of Engineering, The University of Tokyo, Bunkyo-ku, 113-8656 Tokyo, Japan
| | | | | | | |
Collapse
|
1696
|
Auernheimer J, Zukowski D, Dahmen C, Kantlehner M, Enderle A, Goodman SL, Kessler H. Titanium Implant Materials with Improved Biocompatibility through Coating with Phosphonate-Anchored Cyclic RGD Peptides. Chembiochem 2005; 6:2034-40. [PMID: 16206226 DOI: 10.1002/cbic.200500031] [Citation(s) in RCA: 92] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Abstract
One key point for improving osseous integration of implants is to render them osteopromotive by specifically favoring the adhesion of osteoblasts. Mimicking the physiological adhesion process of osteoblasts to the extracellular matrix improves cell adhesion in vitro and results in improved and earlier osseous integration of implants in vivo. Our approach involves coating titanium implants with a tailor-made cyclic-RGD peptide, thus allowing them to bind to specific integrin receptors on the cell surface through multimeric phosphonates. The advantages of this very stable, new type of anchoring for practical application are presented.
Collapse
Affiliation(s)
- Jörg Auernheimer
- Department Chemie, Lehrstuhl II für Organische Chemie, Technische Universität München, Garching, Germany
| | | | | | | | | | | | | |
Collapse
|
1697
|
Jung HJ, Ahn KD, Han DK, Ahn DJ. Surface characteristics and fibroblast adhesion behavior of RGD-immobilized biodegradable PLLA films. Macromol Res 2005. [DOI: 10.1007/bf03218479] [Citation(s) in RCA: 29] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
1698
|
Abstract
Tissue engineering (TE) has existed for several years as an area spanning many disciplines, including medicine and engineering. The use of stem cells as a biological basis for TE coupled with advances in materials science has opened up an entirely new chapter in medicine and holds the promise of major contributions to the repair, replacement and regeneration of damaged tissues and organs. In this article, we review the spectrum of stem cells and scaffolds being investigated for their potential applications in medicine.
Collapse
Affiliation(s)
- J Polak
- Tissue Engineering and Regenerative Medicine Centre, Imperial College London, UK
| | | |
Collapse
|
1699
|
Curran SJ, Chen R, Curran JM, Hunt JA. Expansion of Human Chondrocytes in an Intermittent Stirred Flow Bioreactor, Using Modified Biodegradable Microspheres. ACTA ACUST UNITED AC 2005; 11:1312-22. [PMID: 16259587 DOI: 10.1089/ten.2005.11.1312] [Citation(s) in RCA: 26] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Affiliation(s)
- Stephen J Curran
- UK Centre for Tissue Engineering, UKBioTec Laboratories, University of Liverpool, Liverpool, United Kingdom.
| | | | | | | |
Collapse
|
1700
|
Harbers GM, Gamble LJ, Irwin EF, Castner DG, Healy KE. Development and characterization of a high-throughput system for assessing cell-surface receptor-ligand engagement. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2005; 21:8374-84. [PMID: 16114945 DOI: 10.1021/la050396y] [Citation(s) in RCA: 34] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2023]
Abstract
A nonfouling interfacial interpenetrating polymer network (IPN) of poly(acrylamide-co-ethylene glycol/acrylic acid) [p(AAm-co-EG/AAc)] was grafted to polystyrene for use as a novel platform for the development of high-throughput assays for screening of specific bimolecular interactions (i.e., receptor-ligand engagement). For the development of the IPN, a water-soluble hydrogen-abstracting photoinitiator was investigated: (4-benzoylbenzyl)trimethylammonium chloride. IPN-modified polystyrene surfaces were characterized using XPS, contact angle goniometry, and protein adsorption analysis. These IPN surfaces minimized fibrinogen adsorption compared to tissue culture polystyrene (>96% reduction), prevented mammalian cell adhesion, and served as nonfouling surfaces to graft biological ligands. For bimolecular interaction studies, a model peptide ligand from bone sialoprotein (Ac-CGGNGEPRGDTYRAY-NH(2)) was grafted to p(AAm-co-EG/AAc) via a 3400 M(w) linear pEG spacer. Ligand density measurements, cell culture, and a centrifugal adhesion assay were used to study cell adhesion to peptide-modified IPNs (i.e., receptor-ligand engagement). Ligand density (Gamma) was controllable from approximately 1 to 20 pmol/cm(2) by modulating the peptide input concentration (0.02-20 microM). Cell adhesion was directly dependent on the ligand density. This technology creates a powerful high-throughput system to simultaneously probe a myriad of cell-surface receptor-ligand interactions.
Collapse
Affiliation(s)
- G M Harbers
- Department of Biomedical Engineering, Northwestern University, Evanston, Illinois 60208, USA
| | | | | | | | | |
Collapse
|