Effect of weathering on environmental behavior of microplastics: Properties, sorption and potential risks

Biofilm formation strongly influences the vector transport of triclosan-loaded polyethylene microplastics

This study aimed at evaluating the influence of biofilm in the role of microplastics (MPs) as vectors of pollutants and their impact on Daphnia magna. To do this, virgin polyethylene MPs, (PE-MPs, 40-48 μm) were exposed for four weeks to wastewater (WW) from influent and effluent to promote biofouling. Then, the exposed PE-MPs were put in contact with triclosan. Finally, the toxicity of TCS-loaded and non-TCS loaded PE-MPs were tested on the survival of D. magna adults for 21 days. Results from metabarcoding analyses indicated that exposure to TCS induced shifts in the bacterial community, selecting potential TCS-degrading bacteria. Results also showed that PE-MPs were ingested by daphnids. The most toxic virgin PE-MPs were those biofouled in the WW effluent. The toxicity of TCS-loaded PE-MPs biofouled in the WW effluent was even higher, reporting mortality in all tested concentrations. These results indicate that biofouling of MPs may modulate the adsorption and subsequent desorption of co-occurring pollutants, hence affecting their potential toxicity towards aquatic organisms. Future studies on realistic environmental plastic impact should include the characterization of biofilms growing on plastic. Since inevitably plastic biofouling occurs over time in nature, it should be taken into account as it may modulate the sorption of co-occurring pollutants.

Transgenerational impacts of micro(nano)plastics in the aquatic and terrestrial environment

Plastic particles of diameters ranging from 1 to 1000 nm and > 1 µm to 5 mm are respectively known as nanoplastics and microplastics, and are collectively termed micro(nano)plastics (MNPs). They are ubiquitously present in aquatic and terrestrial environments, posing adverse multifaceted ecological impacts. Recent transgenerational studies have demonstrated that MNPs negatively impact both the exposed parents and their unexposed generations. Therefore, this review summarizes the available research on the transgenerational impacts of MNPs in aquatic and terrestrial organisms, induced by exposure to MNPs alone or in combination with other organic and inorganic chemicals. The most commonly reported transgenerational effects of MNPs include tissue bioaccumulation and transfer, affecting organisms' survival, growth, reproduction, and energy metabolism; inducing oxidative stress; enzyme and genetic responses; and causing tissue damage. Similarly, co-exposure to MNPs and chemicals (organic and inorganic pollutants) significantly impacts survival, growth, and reproduction and induces oxidative stress, thyroid disruption, and genetic toxicity in organisms. The characteristics of MNPs (degree of aging, size, shape, polymer type, and concentration), exposure type and duration (parental exposure vs. multigenerational exposure and acute exposure vs. chronic exposure), and MNP-chemical interactions are the main factors affecting transgenerational impacts. Selecting MNP properties based on their realistic environmental behavior, employing more diverse animal models, and considering chronic exposure and MNP-chemical mixture exposure are salient research prospects for an in-depth understanding of the transgenerational impacts of MNPs.

Sorption of representative organic contaminants on microplastics: Effects of chemical physicochemical properties, particle size, and biofilm presence

Microplastic pollution has attracted mounting concerns worldwide. Microplastics may concentrate organic and metallic contaminants; thus, affecting their transport, fate and organismal exposure. To better understand organic contaminant-microplastic interactions, our study explored the sorption of selected polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), α-hexabromocyclododecane (α-HBCDD), and organophosphate flame retardants (OPFRs) on high-density polyethylene (HDPE) and polyvinylchloride (PVC) microplastics under saline conditions. Sorption isotherms determined varied between chemicals and between HDPE and PVC microplastics. Log Freundlich sorption coefficients (Log K_F) for the targeted chemicals ranged from 2.01 to 5.27 L kg^-1 for HDPE, but were significantly lower for PVC, i.e., ranging from Log K_F data (2.84 - 8.58 L kg^-1). Significant correlations between chemicals' Log K_F and Log K_ow (octanol-water partition coefficient) indicate that chemical-dependent sorption was largely influenced by their hydrophobicity. Sorption was evaluated using three size classes (< 53, 53 - 300, and 300 - 1000 µm) of lab-fragmented microplastics. Particle size did not significantly affect sorption isotherms, but influenced the time to reach equilibrium and the predicted maximum sorption, likely related to microplastic surface areas. The presence of biofilms on HDPE particles significantly enhanced contaminant sorption capacity, indicating more complex sorption dynamics in the chemical-biofilm-microplastic system. Our findings offer new insights into the chemical-microplastic interactions in marine environment.

Unveiling interactions of norfloxacin with microplastic in surface water by 2D FTIR correlation spectroscopy and X-ray photoelectron spectroscopy analyses

Microplastics (MPs) has shown adsorption of hydrophilic organic matters (HOMs) in aqueous environments. However, it is still difficult to predict the adsorption behaviors of HOMs by different MPs, especially in authentic water systems. In this study, the adsorption behaviors and mechanisms of norfloxacin (NOR) onto polyamide (PA) MPs were investigated in both simulated and real surface water. The results showed that the adsorption equilibrium of NOR by PA in simulated surface water could be achieved within 15 h, while the adsorption rate of NOR in real surface was slowed down, with the equilibrium time of 25 h. Pseudo-second-order model could well describe the adsorption kinetics data. The experimental maximum adsorption capacity of NOR on PA in real surface water (e. g. 132.54 ug/g) was dramatically reduced by 37.5 % compared with that in simulated surface water (e. g. 212.25 ug/g), and the adsorption isotherm would obey Freundlich model. Besides, the leaching of NOR from the surface of PA could occur obviously at acidic environment. Furthermore, the salinity and natural organic matter exhibited significantly adverse effects on the NOR adsorption. Finally, the results of 2D Fourier transform infrared correlation spectroscopy and X-ray photoelectron spectroscopy indicated that the electrostatic, H-bond and van der Waals interactions were involved in the adsorption. More importantly, the sequential functional groups in the adsorption process followed the orders: 1638 (CO) > 1542 amide II (-NH-CO) > 717 (CH₂) > 1445 (CO) > 973 amide IV (CONH). This study could provide an insight into the interactions between PA and NOR in different water environments.

Laboratory simulated aging methods, mechanisms and characteristic changes of microplastics: A review

Microplastics (MPs) aging occurs in all environmental medias and affects the environmental behaviour and toxicity of MPs. Due to the extremely slow process of aging, laboratory simulated aging methods have had to be used to research the properties, behaviour, toxicity and effects of aged MPs. However, multiple laboratory aging methods with different mechanisms have led to divergent viewpoints on the characteristics, behavior and toxicity of aged MPs. Therefore, this paper reviewed the main laboratory MPs aging methods and mechanism, including those that involve UV, advanced oxidation processes (AOPs), sunlight or simulated sunlight, chemical treatment, heat, plasma radiation, etc. As a technology with a low time cost, AOPs have potential and are recommended. Physical, chemical, and coupled aging significantly alter MPs surface topography and functional groups, which affect MPs adsorption, migration and toxicity. However, the effects of aging on environmental behaviour and toxicity are highly uncertain. The carbonyl index (CI) and O/C ratio are generally applied to evaluate the MPs aging degree. This review highlights the need to provide adequate information on coupled simulated aging methods to allow better elucidation of the underlying mechanisms of aging and its effect on MPs environmental behaviour and toxicity.

Extruded polystyrene microplastics as a source of brominated flame retardant additives in the marine environment: long-term field and laboratory experiments

Microplastics (MPs) in the environment have become a global concern, not only for the physical effects of the plastic particles themselves but also for being vectors of chemical additives. In this context, little is known about the ability of MPs, particularly extruded polystyrene microplastics (XPS-MPs), to release organic chemical additives in the marine environment. In this study, a series of field and laboratory experiments were carried out to determine the leaching behaviour of organic additives including brominated flame retardants from XPS-MPs into seawater. The conducted experiments confirmed a rapid release of bisphenol A (BPA), 2,4,6-tribromophenol (TBP), tetrabromobisphenol A (TBBPA) and hexabromocyclododecane diastereoisomers (α-, β-, and γ-HBCDD) from the studied MPs followed by a slower rate of release over time. The effects of environmental factors on the leaching rates of these additives were also examined. Increasing Dissolved Organic Matter (DOM) concentrations and the temperature of the seawater enhanced the release of additives by increasing their solubility and polymer flexibility. In contrast, pH tested at 7, 7.5 and 8 was found to have a minor effect on additives leaching; and salinity negatively affected the leaching rate likely due to their reduced solubility and reduced diffusion from the MPs. The present study provides empirical evidence of the behaviour of XPS-MPs as a source of organic additives in the marine environment that merit further investigation.

The Montreal Protocol and the fate of environmental plastic debris

Microplastics (MPs) are an emerging class of pollutants in air, soil and especially in all aquatic environments. Secondary MPs are generated in the environment during fragmentation of especially photo-oxidised plastic litter. Photo-oxidation is mediated primarily by solar UV radiation. The implementation of the Montreal Protocol and its Amendments, which have resulted in controlling the tropospheric UV-B (280-315 nm) radiation load, is therefore pertinent to the fate of environmental plastic debris. Due to the Montreal Protocol high amounts of solar UV-B radiation at the Earth's surface have been avoided, retarding the oxidative fragmentation of plastic debris, leading to a slower generation and accumulation of MPs in the environment. Quantifying the impact of the Montreal Protocol in reducing the abundance of MPs in the environment, however, is complicated as the role of potential mechanical fragmentation of plastics under environmental mechanical stresses is poorly understood.

Multi stress system: Microplastics in freshwater and their effects on host microbiota

Microplastics are persistent and complex contaminants that have recently been found in freshwater systems, raising concerns about their presence in aquatic organisms. Plastics tend to be seen as an inert material; however, it is not well known if exposure to plastics for a prolonged time, in combination with organic chemicals, causes organism mortality. Ingestion of microplastics in combination with another pollutant may affect a host organism's fitness by altering the host microbiome. In this study, we investigated how microplastics interact with other pollutants in this multi-stress system, and whether they have a synergistic impact on the mortality of an aquatic organism and its microbiome. We used wild water boatmen Hemiptera (Corixidae) found at lake Erken located in east-central Sweden in a fully factorial two-way microcosm experiment designed with polystyrene microspheres and a commonly used detergent. The microplastic-detergent interaction is manifested as a significant increase in mortality compared to the other treatments at 48 h of exposure. The diversity of the microbial communities in the water was significantly affected by the combined treatment of microplastics and the detergent while the microbial communities in the host were affected by the treatments with microplastics and the detergent alone. Changes in relative abundance in Gammaproteobacteria (family Enterobacteriaceae), were observed in the perturbed treatments mostly associated with the presence of the detergent. This confirms that microplastics can interact with detergents having toxic effects on wild water boatmen. Furthermore, microplastics may impact wild organisms via changes in their microbial communities.

Size-independent quantification of nanoplastics in various aqueous media using surfaced-enhanced Raman scattering

In this work, we successfully developed an intriguing preparation strategy to reduce the size-dependent effect of nanoplastics (NPLs), which is the limitation of NPLs quantification by surface-enhanced Raman scattering (SERS). This simple and low-cost technique enabled us to quantify different sizes (i.e., 100, 300, 600, and 800 nm) of polystyrene nanospheres (PS NSs) in various aqueous media. The SERS substrate was simply prepared by sputtering gold particles to cover on a glass cover slide. By dissolving PS NSs in toluene and preconcentrating by coffee-ring effect, SERS measurement can quantify NPLs at a very low concentration with a limit of detection (LOD) of approximately 0.10-0.26 μg/mL. The experiment was also conducted in the presence of interferences, including salts, sugars, amino acids, and detergents. The method was validated for quantitative analysis using a mixture of 100-, 300-, 600-, and 800-nm PS NSs in a ratio of 1:1:1:1 in real-world media (i.e., tap water, mineral water, and river water), which successfully approaches the evaluation of PS NSs in the range of 10-40 µg/mL with an LOD of approximately 0.32-0.52 µg/mL.

New insights into adsorption mechanism of pristine and weathered polyamide microplastics towards hydrophilic organic compounds

The widespread coexistence of hydrophilic organic compounds and microplastics (MPs) in the environment has greatly increased their associated environmental problems. To evaluate the potential carrier effect of oxygen-containing MPs on coexisting pollutants, adsorption behaviors of four hydrophilic organic compounds (benzoic acid, sulfamethoxazole, sulfamerazine and ciprofloxacin) on MPs (pristine and weathered polyamide (PA)) were studied in the aquatic environment. The results showed that the surface morphology, size, oxygen content, molecular structure, surface charge and crystallinity of PA were changed after weathering, and the weathering degree of PA treated with heat-activated potassium persulfate was the highest. The main adsorption mechanisms included hydrogen bonding, hydrophobic interaction, charge-assisted hydrogen bonding, and electrostatic interaction. Hydrogen bonding and hydrophobic interaction contributed to the adsorption, while electrostatic interaction weakened the adsorption under the specific pH conditions. The formation of charge-assisted hydrogen bonding (CAHB) was also verified through pH influence experiments, and this force can overcome the electrostatic repulsion. The high adsorption of KPA (PA weathered by K₂S₂O₈) under alkaline conditions was well explained by the formation of homonuclear CAHB due to the increase of oxygen-containing functional groups compared to the other three PA. Additionally, weathering did not always enhance the adsorption of hydrophilic organic compounds on PA, which was related to the changes in surface charge, crystallinity and hydrophilicity of PA. Overall, the physical and chemical properties (e.g., specific surface area, oxygen content, molecular structure) of PA after weathering and its trend of adsorption were different from other oxygen-free MPs in this study. This work can provide basic data for environmental risk of MPs and contribute to clarify and understand the processes of oxygenated MPs in the aquatic environment.

Microplastics (MPs) distribution in Surface Sediments of the Freidounkenar Paddy Wetland

There is an urgent need to increase knowledge on the distribution of microplastics (MPs) in wetlands because these are sites of special ecological value and the ever-growing use of plastic can threaten such fragile ecosystems. This research assesses, for the first time, the occurrence of MPs in surface sediment of the Freidounkenar International Wetland (Northern Iran), a valuable habitat for migratory birds. A total of 1368 MP/kg were identified in the surface sediments of the wetland. The distribution of MPs in sediments per area was Ezbaran (36.5%), Western Sorkhrood (32.0%), Freidounkenar (20.1%) and Eastern Sorkhrood Ab-bandans (11.4%). The most contaminated sites were located close to agricultural fields, Damgahs (agroecosystems for birds), fishing areas and roads. Fibers and white-transparent and black-grey MPs constituted the dominant MPs in the surface sediment. The most abundant MPs were < 250 μm and these were made of nylon, polypropylene-low density polyethylene copolymer, polystyrene, low density polyethylene and polypropylene. The identification of MPs was carried out visually and supported with Scanning Electron Microscopy (SEM)-Energy Dispersive X-Ray (EDX) and micro-Raman techniques. There were weathering signs in large proportion of the MPs, according to SEM analysis, which evidences their formation from the degradation of other plastics. This is a comprehensive study on MPs in surface sediment of this sensitive internationally recognized ecosystem with high ecological value.

Pro-Inflammatory and Cytotoxic Effects of Polystyrene Microplastics on Human and Murine Intestinal Cell Lines

Plastic is a polymer extremely resistant to degradation that can remain for up to hundreds or thousands of years, leading to the accumulation of massive amounts of plastic waste throughout the planet's ecosystems. Due to exposure to various environmental factors, plastic breaks down into smaller particles named microplastics (1-5000 μm) and nanoplastics (<1 μm). Microplastics (MPs) are ubiquitous pollutants but, still, little is known about their effects on human and animal health. Herein, our aim is to investigate cytotoxicity, oxidative stress, inflammation and correlated gene modulation following exposure to polystyrene microplastics (PS-MPs) in HRT-18 and CMT-93 epithelial cell lines. After 6, 24 and 48 h PS-MPs treatment, cell viability (MTT) and oxidative stress (SOD) assays were performed; subsequently, expression changes and cytokines release were investigated by Real-Time PCR and Magnetic-beads panel Multiplex Assay, respectively. For each exposure time, a significantly increased cytotoxicity was observed in both cell lines, whereas SOD activity increased only in CMT-93 cells. Furthermore, Magnetic-beads Multiplex Assay revealed an increased release of IL-8 in HRT-18 cells' medium, also confirmed by gene expression analysis. Results obtained suggest the presence of a pro-inflammatory pattern induced by PS-MPs treatment that could be related to the observed increase in cytotoxicity.

Methine initiated polypropylene-based disposable face masks aging validated by micromechanical properties loss of atomic force microscopy

The contagious coronavirus disease-2019 pandemic has led to an increasing number of disposable face masks (DFMs) abandoned in the environment, when they are exposed to the air condition, the broken of chemical bond induced aging is inevitably occurred which meantime would cause a drastic decrease of the mechanical flexibility. However, the understanding of between chemical bond change related to aging and its micromechanical loss is limited due to the lack of refined techniques. Herein, the atomic force microscopy (AFM) technique was firstly used to observe the aging process induced by methine of the polypropylene-based DFMs. By comparing the micromechanical properties loss, the influences of humidity and light density on the DFM aging were systematically studied in the early 72 h, and it revealed that the increasing scissions number of the easiest attacked methine (C^t-H) can gradually decrease the micromechanical properties of the polypropylene (PP)-based DFM. Furthermore, the results are also validated by the in- situ FTIR and XPS analysis. This work discloses that an aging process can be initially estimated with the micromechanical changes observed by AFM, which offers fundamental data to manage this important emerging plastic pollution during COVID-19 pandemic.

Elucidating the consequences of the co-exposure of microplastics jointly to other pollutants in bivalves: A review

The marine environment has numerous impacts related to anthropogenic activities including pollution. Abundances of microplastics (MPs) and other pollutants are continuously increasing in the marine environment, resulting in a complex mixture of contaminants affecting biota. In order to understand the consequences, a review of studies analyzing combined effects of MPs and other types of pollutants in bivalves has been conducted as species in this group have been considered as sentinel and bioindicators. Regarding studies reviewed, histological analyses give evidence that MPs can be located in the haemolymph, gills and gonads, as well as in digestive glands in the intestinal lumen, epithelium and tubules, demonstrating that the entire body of bivalves is affected by MPs. Moreover, DNA strand breaks represent the most relevant form of damage caused by the enhanced production of reactive oxygen species in response to MPs exposure. The role of MPs as vectors of pollutants and the ability of polymers to adsorb different compounds have also been considered in this review highlighting a high variability of results. In this sense, toxic impacts associated to MPs exposure were found to significantly increase with the co-presence of antibiotics or petroleum hydrocarbons amongst other pollutants. In addition, bioaccumulation processes of pollutants (PAHs, metals and others) have been affected by the co-presence with MPs. Histological, genetic and physiological alterations are the most reported damages, and the degree of harm seems to be correlated with the concentration and size of MP and with the type of pollutant.

Children's playgrounds contain more microplastics than other areas in urban parks

Children spend many hours in urban parks and playgrounds, where the tree canopy could filter microplastics released from the surrounding urban hotspots. However, the majority of children's playgrounds also contain plastic structures that could potentially release microplastics. To assess if the children's playgrounds pose a higher exposure risk than other places inside the park, we evaluate the extent of microplastic contamination in the sand, soil, and leaf samples from 19 playgrounds inside urban parks in Los Angeles, CA, USA. The average microplastic concentration in sand samples collected inside the playground was 72 p g-1, and >50 % of identified plastics were either polyethylene or polypropylene. Microplastic concentrations inside the playgrounds were on average >5 times greater than concentrations outside the playgrounds in the park, indicating that children playing within the playground may be exposed to more microplastics than children playing outside the playground in the same park. By comparing the microplastic composition found inside and outside the playgrounds with the plastic composition of the plastic structures in the playground, we show that plastic structures and other products used inside the playgrounds could contribute to elevated microplastic concentration. The population density was slightly correlated with a microplastic concentration in the park soil but did not correlate with microplastic concentration inside the playgrounds. Therefore, playgrounds in urban parks may have microplastic exposure risks via inhalation or ingestion via hand-to-mouth transfer.

Interactive adverse effects of low-density polyethylene microplastics on marine microalga Chaetoceros calcitrans

Low-density polyethylene (LDPE) is broadly utilized worldwide, increasing more dramatically during the COVID-19 pandemic, and the majority ends up in the aquatic environment as microplastics. The influence of polyethylene microplastics (LDPE-MPs) on aquatic ecosystems still needs further investigation, especially on microalgae as typical organisms represented in all aquatic systems and at the base of the trophic chain. Thereby, the biological and toxicity impacts of LDPE-MPs on Chaetoceros calcitrans were examined in this work. The results revealed that LDPE-MPs had a concentration-dependent adverse effect on the growth and performance of C. calcitrans. LDPE-MPs contributed the maximum inhibition rates of 85%, 51.3%, 21.49% and 16.13% on algal growth chlorophyll content, φPSII and Fv/Fm, respectively. The total protein content, superoxide dismutase (SOD), catalase (CAT) and peroxidase (POD) activities were significantly increased at 25 mg L-1 LDPE-MPs by 1.37, 3.52, 2.75 and 1.84 folds higher than those of the controls to sustain the adverse effects of LDPE-MPs. Extracellular polymeric substance (EPS) and monosaccharides contents of C. calcitrans were improved under low concentration of LDPE-MPs, which could facilitate the adsorption of MPs particles on the microalgae cell wall. This adsorption caused significant physical damage to the algal cell structure, as observed by SEM. These results suggest that the ecological footprint of MPs may require more attention, particularly due to the continuing breakdown of plastics in the ecosystem.

Removal of dyes, oils, alcohols, heavy metals and microplastics from water with superhydrophobic materials

A wide variety of pollutants can be currently found in water that are extremely difficult to remove due to their chemical composition and properties. A lot of effort has been made to tackle this issue that directly affects the environment. In this scenario, superhydrophobic surfaces, which have a water contact angle >150°, have emerged as an innovative technology that could be applied in different ways. Their environmental applications show promise in removing emerging pollutants from water. While the number of publications on superhydrophobic materials has remained largely unchanged since 2019, the number of articles on the environmental applications of superhydrophobic surfaces is still rising, corroborating the interest in this area. Herein, we briefly present the basis of superhydrophobicity and show the different materials that have been used to remove pollutants from water. We have identified five types of emerging pollutants that are efficiently removed by superhydrophobic materials: oils, microplastics, dyes, heavy metals, and ethanol. Finally, the future challenges of these applications are also discussed, considering the state of the art of the environmental applications of superhydrophobic materials.

Microplastic Textile Fibers Accumulate in Sand and Are Potential Sources of Micro(nano)plastic Pollution

Agricultural soils have been identified as sinks for microplastic fibers; however, little information is available on their long-term fate in these soils. In this study, polyester and nylon fibers were precisely cut to relevant environmental lengths, using novel methodology, and their behavior in sand columns was studied at environmental concentration. The longer fibers (>50 μm) accumulated in the upper layers of the sand, smaller fibers were slightly more mobile, and nylon showed marginally higher mobility than polyester. Previous studies have overlooked changes in microplastic morphology due to transport in soil. Our study is the first to show that fibers exhibited breakage, peeling, and thinning under flow conditions in soil, releasing smaller, more mobile fragments. Furthermore, the peelings exhibited different adsorption properties compared to the core fiber. This suggests that microplastic fibers can become a source of smaller micro(nano)plastics and potential vectors for certain molecules, risking continuous contamination of nearby soils, surfaces, and groundwater.

Biofilm enhances the copper (II) adsorption on microplastic surfaces in coastal seawater: Simultaneous evidence from visualization and quantification

Microplastics (MPs) exposed to the urban coastal seawater could form biofilms, which facilitate the adsorption and transportation of hazardous contaminants. However, influence of biofilms on the metal adsorption of MPs, especially the co-existence of biofilm and metals on MPs, is still less known. In this study, the adsorption of copper (Cu) on biofilm-coated MPs (BMPs) was visually analyzed and quantified. The results of scanning electron microscopy in combination with energy dispersive X-ray showed that biofilm and metals co-occurred on MPs in seawater. The nanoscale secondary ion mass spectrometry images further exhibited that the distribution of Cu, chlorine (Cl) and biofilm on MP surfaces was highly consistent. Moreover, the adsorption of Cu(II) on BMPs was enhanced as quantified by inductively coupled plasma-mass spectrometer. Furthermore, different species on BMPs with and without Cu were identified, and their potential functions of metal or Cl metabolism were predicted based on KEGG pathway database. Overall, for the first time, this study provides visual and quantified evidences for the enhancement of Cu(II) adsorption on BMPs based on co-localization, and it may shed a light on the development of methodologies for investigating the interaction among MPs, biofilms and pollutants in marine environment.

Insight into the Photodegradation of Microplastics Boosted by Iron (Hydr)oxides

Iron (hydr)oxides as a kind of natural mineral actively participate in the transformation of organic pollutants, but there is a large knowledge gap in their impacts on photochemical processes of microplastics (MPs). This study is the first to examine the degradation of two ordinary plastic materials, polyethylene (PE) and polypropylene (PP), mediated by iron (hydr)oxides (goethite and hematite) under simulated solar light irradiation. Both iron (hydr)oxides significantly promoted the degradation of MPs (particularly PP) with a greater effect by goethite than hematite, related to hydroxyl radical (^•OH) produced by iron (hydr)oxides. Under light irradiation, the surface Fe(II) phase catalyzed the production of H₂O₂ and promoted the release of Fe²⁺, leading to the subsequent light-driven Fenton reaction which produced a large amount of ^•OH. As the iron (hydr)oxides were modified with NaF at various concentrations, the activity of the surface Fe(II) as well as the release of Fe²⁺ were greatly reduced, and thus the ^•OH formation and MP degradation were depressed remarkably. It is worth noting that the surface hydroxyl groups (especially ≡FeOH) affected the reaction kinetics of ^•OH by regulating the activity of Fe species. These findings unveil the distinct impacts and intrinsic mechanisms of iron (hydr)oxides in influencing the photodegradation of MPs.

Interactions of microplastics and soil pollutants in soil-plant systems

In recent years, increasing studies have been reported on characterization and detection of microplastics (MPs), and their interactions with organic pollutants (OPs) and heavy metals (HMs) in soils. However, a comprehensive review on the characteristics and factors that influence MPs distribution in soils, the sorption characteristics and mechanisms of soil contaminants by MPs, especially the interactions of MPs and their complexes with pollutants in the soil-plant systems remains rarely available at present. This review focuses on the sorption features and mechanisms of pollutants by MPs in soil and discussed the effects of MPs and their complexing with pollutants on soil properties, microbe and plants. The polarity of MPs significantly influenced the sorption of OPs, and different sorption mechanisms are involved for the hydrophobic and hydrophilic OPs. The sorption of OPs on MPs in soils is different from that in water. Aging of MPs can promote the sorption and migration of contaminants. The enhanced effects of biofilm in microplastisphere on the sorption of pollutants by MPs are critical, and interactions of soil environment-MPs-microbe-HMs-antibiotics increase the potential pathogens and larger release of resistance genes. The coexistence of HMs and MPs affected the growth of plants and the uptake of HMs and MPs by the plants. Moreover, the type, dose, shape and particle size of MPs have important influences on their interactions with pollutants and subsequent effects on soil properties, microbial activities and plant growth. This review also pointed out some knowledge gaps and constructive countermeasures to promote future research in this field.

The weathering process of polyethylene microplastics in the paddy soil system: Does the coexistence of pyrochar or hydrochar matter?

This study is based on a particular test site to simulate the weathering process of microplastics (MPs) in paddy soil. A substantial amount of plastic waste, especially MPs, inevitably accumulates in agricultural soil due to the high consumption and short average use of plastics. Recently, MP pollution has become a global environmental concern. However, insight into the soil weathering process of MPs in paddy soil, particularly in the presence of biochar, is lacking. In this study, the physicochemical properties of polyethylene (PE) MPs were determined through a 24-week weathering system conducted in paddy soil, paddy soil with pyrochar, or hydrochar. Moreover, the sorption of original and weathered PE MPs toward three typical pollutants (cadmium/Cd, bisphenol A/BPA, and dimethyl phthalate/DMP) was investigated. The surface of PE MPs was fractured, 1.1-fold rougher, yellow-colored (11.7 units), and 1.8-fold more oxidized after paddy soil weathering. In addition, the crystallinity, negative charge, and stronger hydrophilicity of weathered PE MPs increased compared to original PE MPs. Weathering in a pyrochar or hydrochar system caused fissures, extensive destruction of amorphous areas, and accelerated chemical or bio-oxidation processes for PE MPs, resulting in a more noticeable change in roughness (1.4-2.2-fold), yellow color (12.7-13.7), crystallinity (1.2-1.5-fold), and oxygen content (2.5-3.6-fold). Weathered PE MPs facilitated the sorption with Cd and BPA, attributed to larger specific surface area, abundant polar functional groups, and increased negatively charged sites. However, sorption of DMP to PE MPs was highly influenced by their hydrophobicity, resulting in decreased hydrophobic partition sorption on weathered PE MPs. Overall, paddy soil weathering affected the properties of PE MPs and enhanced sorption of Cd and BPA but reduced sorption of DMP. The coexistence of biochar exacerbated the paddy soil weathering effect. The insight gained from this study assists in better understanding the weathering process of PE MPs in agricultural soils.

Microplastic Effects on Thrombin-Fibrinogen Clotting Dynamics Measured via Turbidity and Thromboelastography

Micro/nanoplastics, whether manufactured or resulting from environmental degradation, can enter the body through ingestion, inhalation, or dermal pathways. Previous research has found that nanoplastics with diameters of ≤100 nm can translocate into the circulatory system in a dose-dependent manner and potentially impact thrombosis and hemostasis. To investigate the direct effects of microplastics on fibrin clot formation, a simplified ex vivo human thrombin/fibrinogen clot model was utilized. The 100 nm polystyrene particles (non-functionalized [nPS] and aminated [aPS]) were preincubated (0-200 µg/mL) with either thrombin or fibrinogen, and fibrin clot formation was characterized via turbidity and thromboelastography (TEG). When the particles were preincubated with fibrinogen, little effect was observed for aPS or nPS on turbidity or TEG up through 100 µg/mL. TEG results demonstrated a significant impact on clot formation rate and strength, in the case of nPS preincubated with thrombin exhibiting a significant dose-dependent inhibitory effect. In conclusion, the presence of microplastics can have inhibitory effects on fibrin clot formation that are dependent upon both particle surface charge and concentration. Negatively charged nPS exhibited the most significant impacts to clot strength, turbidity, and rate of fibrin formation when first incubated with thrombin, with its impact being greatly diminished when preincubated with fibrinogen in this simplified fibrin clot model.

Experimental Evidence from the Field that Naturally Weathered Microplastics Accumulate Cyanobacterial Toxins in Eutrophic Lakes

Freshwater ecosystems with recurring harmful algal blooms can also be polluted with plastics. Thus the two environmental problems may interact. To test whether microplastics influence the partitioning of microcystins in freshwater lakes, we examined the sorption of four microcystin congeners to different polymers of commercially available plastics (low-density polyethylene, polyethylene terephthalate, polyvinyl chloride, and polypropylene). We conducted three experiments: a batch sorption experiment in the laboratory with pristine microplastics of four different polymers, a second batch sorption experiment in the laboratory to compare pristine and naturally weathered microplastics of a single polymer, and a 2-month sorption experiment in the field with three different polymers experiencing natural weathering in a eutrophic lake. This series of experiments led to a surprising result: microcystins sorbed poorly to all polymers tested under laboratory conditions (<0.01% of the initial amount added), irrespective of weathering, yet in the field experiment, all polymers accumulated microcystins under ambient conditions in a eutrophic lake (range: 0-84.1 ng/g). Furthermore, we found that the sorption capacity for microcystins differed among polymers in the laboratory experiment yet were largely the same in the field. We also found that the affinity for plastic varied among microcystin congeners, namely, more polar congeners demonstrated a greater affinity for plastic than less polar congeners. Our study improves our understanding of the role of polymer and congener type in microplastic-microcystin sorption and provides novel evidence from the field, showing that naturally weathered microplastics in freshwater lakes can accumulate microcystins. Consequently, we caution that microplastics may alter the persistence, transport, and bioavailability of microcystins in freshwaters, which could have implications for human and wildlife health. Environ Toxicol Chem 2022;41:3017-3028. © 2022 SETAC.

Can aged microplastics be transport vectors for organic micropollutants? - Sorption and phytotoxicity tests

Microplastics have been investigated over the last decade as potential transport vectors for other pollutants. However, the specific role of plastic aging, in which plastics change their characteristics over time when exposed to environmental agents, has been overlooked. Therefore, sorption experiments were herein conducted using virgin and aged (by ozone treatment or rooftop weathering) microplastic particles of LDPE - low-density polyethylene, PET - poly(ethylene terephthalate), or uPVC - unplasticized poly(vinyl chloride). The organic micropollutants (OMPs) selected as sorbates comprise a diversified group of priority substances and contaminants of emerging concern, including pharmaceutical substances (florfenicol, trimethoprim, diclofenac, tramadol, citalopram, venlafaxine) and pesticides (alachlor, clofibric acid, diuron, pentachlorophenol), analyzed at trace concentrations (each ≤100 μg L^-1). Sorption kinetics and equilibrium isotherms were obtained, as well as the confirmation that the aging degree of microplastics plays a major role in their sorption capacities. The results show an increased sorption of several OMPs on aged microplastics when compared to pristine samples, i.e. the sorption capacity increasing from one or two sorbed substances (maximum 3 μg g^-1 per sorbate) up to nine after aging (maximum 10 μg g^-1 per sorbate). The extent of sorption depends on the OMP, polymer and the effectiveness of the aging treatment. The modifications (e.g. in the chemical structure) between virgin and aged microplastics were linked to the increased sorption capacity of certain OMPs, allowing to better understand the different affinities observed. Additionally, phytotoxicity tests were performed to evaluate the mobility of the OMPs sorbed on the microplastics and the potential effects (on germination and early growth) of the combo on two species of plants (Lepidium sativum and Sinapis alba). These tests suggest low or no phytotoxicity effect under the conditions tested but indicate a need for further research on the behavior of microplastics on soil-plant systems.

Microplastics and nanoplastics in the atmosphere: the potential impacts on cloud formation processes

The presence of microplastics and nanoplastics (MnPs) in the atmosphere and their transport on a global scale has previously been demonstrated. However, little is known about their environmental impacts. MnPs could act as cloud condensation nuclei (CCN) or ice nucleating particles (INPs), affecting cloud formation processes. In sufficient quantities, they could change the cloud albedo, precipitation, and lifetime, collectively impacting the Earth's radiation balance and climate. In this perspective, we evaluate the potential impact of MnPs on cloud formation by assessing their ability to act as CCN or INPs. Based on an analysis of their physicochemical properties, we propose that MnPs can act as INPs and potentially as CCN, after environmental ageing processes, such as photochemical weathering, sorption of macromolecules or trace soluble species onto the particle surface. The actual climate impact(s) of MnPs depend on their abundance relative to other aerosols. The concentration of MnPs in the atmosphere is currently low, so they are unlikely to make a significant contribution to radiative forcing in regions exposed to other anthropogenic aerosol pollution. Nevertheless, MnPs will potentially cause non-negligible perturbations in unpolluted remote/marine clouds and generate local climate impacts, particularly in view of increased MnPs release to the environment in future. Further measurements coupled with better characterization of the physiochemical properties of MnPs will enable a more accurate assessment of climate impacts of MnPs to act as INP and CCN.

Developments in advanced oxidation processes for removal of microplastics from aqueous matrices

Continuous incorporation of microplastics (MPs) and their fragmented residues into the ecosystem has sparked significant scientific apprehensions about persistence, a multitude of sources, and toxicity impacts on human health and aquatic entities. Overcoming this multifaceted hazard necessitates the development of novel techniques with robust efficiencies to eliminate microplastics from the environmental compartments. Coagulation, flocculation, and membrane filtration are non-destructive techniques but necessitate extra steps for microplastic degradation, whereas biological means have been confirmed less efficient (less than 15% degradation). Recent reports have emphasized advanced oxidation processes (AOPs) as practical treatment alternatives, representing superior catalytic efficacy for microplastic degradation (≈30-95%). Nevertheless, additional investigations should be carried out to evaluate the performance of AOPs in degrading microplastics under real environmental matrices. Moreover, the detection of transformed metabolites, degradation mechanistic insights, and toxicity bioassays are required to substantiate AOP assumption as feasible remediation substitutes. This review focuses on the source, occurrence, discharge, transportation, and associated paramount health risks of microplastics. Advanced oxidation processes-assisted removal of microplastics from the aqueous matrices is thoroughly vetted with up-to-date findings. Factors affecting the degradation of MPs have been discussed in detail. In addition to the generalized mechanistic insights into photocatalytic degradation, the risk assessment of aging intermediates is also comprehended. Finally, the review was concluded by emphasizing current research gaps and incoming research tendencies to provide guidelines for efficiently addressing microplastic pollution.

Aged microplastics enhance their interaction with ciprofloxacin and joint toxicity on Escherichia coli

Microplastics (MPs) in natural environments undergo complex aging processes, changing their interactions with coexisting antibiotics, and posing unpredictable ecological risks. However, the joint toxicity of aged MPs (aMPs) and antibiotics to bacteria, especially at the molecular level, is unclear. In this study, non-thermal plasma technology was used to simultaneously simulate various radical oxidation and physical reactions that occur naturally in the environment, breaking the limitation of simple aging process in laboratory aging technologies. After aging, we investigated the altered properties of aMPs, their interactions with ciprofloxacin (CIP), and the molecular responses of E. coli exposed to pristine MPs (13.5 mg/L), aMPs (13.5 mg/L), and CIP (2 μg/L) individually or simultaneously. aMPs bound far more CIP to their surfaces than pristine MPs, especially in freshwater ecosystems. Notably, the growth of E. coli exposed to aMPs alone was inhibited, whereas pristine MPs exposure didn't affect the growth of E. coli. Moreover, the most differentially expressed genes in E. coli were induced by the coexposure of aMPs and CIP. Although E. coli depended on chemotaxis to improve its flagellar rotation and escaped the stress of pollutants, the coexposure of aMPs and CIP still caused cell membrane damage, oxidative stress, obstruction of DNA replication, and osmotic imbalance in E. coli. This study filled the knowledge gap between the toxicity of aMPs and pristine MPs coexisting with antibiotics at the transcription level, helping in the accurate assessment of the potential risks of MPs to the environment.

Effects of ionic strength and particle size on transport of microplastic and humic acid in porous media

As an emerging pollutant, the transport behavior of colloidal microplastic particles (CMPs) in saturated porous media may be affected by the simultaneous presence of other substances in the natural environment. In this study, colloidal polystyrene microplastic particles (PSMPs) were selected as the representative of CMPs to investigate the cotransport behaviors of CMPs in the presence of humic acid (HA) under varied environmental conditions (ionic strength: 1, 100 mM KCl; HA concentration: 0, 5, 10, 20 mg⋅L^-1) in porous media. The presence of HA with different concentrations was found to increase the mobility of 1.0-μm and 0.2-μm CMPs in porous media in a non-linear and non-monotonic manner. Furthermore, the HA-facilitated transport of CMPs occurred under both electrostatically unfavorable and favorable attachment conditions (limited to the conditions examined in this study, corresponding to 1 and 100 mM KCl, respectively). The transport behavior of the smaller-sized CMPs (0.2-μm CMPs) was more sensitive to the change of ionic strength and the presence of HA than that of the larger-sized CMPs (1.0-μm CMPs). The cotransport process of CMPs and HA was affected by many factors. Modeling results showed that a small amount of competitive blocking occurred during the cotransport process. Moreover, both the presence of HA and change in ionic strength could affect the surface properties of CMPs. Thus, the cotransport behavior of CMPs with HA was different from the transport of individual CMPs in porous media. Experimental results revealed that HA induced complexity in the transport behavior of CMPs in the aqueous environment. Therefore, undeniably, a lot more systematic explorations are further demanded to better comprehend the CMPs cotransport mechanism in the presence of other substances.

Magnetic Extraction of Weathered Tire Wear Particles and Polyethylene Microplastics

Magnetic extraction offers a rapid and low-cost solution to microplastic (MP) separation, in which we magnetize the hydrophobic surface of MPs to separate them from complex environmental matrices using magnets. We synthesized a hydrophobic Fe-silane based nanocomposite (Fe@SiO2/MDOS) to separate MPs from freshwater. Pristine and weathered, polyethylene (PE) and tire wear particles (TWP) of different sizes were used in the study. The weathering of MPs was performed in an accelerated weathering chamber according to ISO 4892-2:2013 standards that mimic natural weathering conditions. The chemical properties and morphology of the Fe@SiO2/MDOS, PE and TWP were confirmed by Fourier transform infrared spectroscopy and Scanning electron microscopy, respectively. The thermal properties of PE and TWP were evaluated by Thermogravimetric analysis. Using 1.00 mg of Fe@SiO2/MDOS nanocomposite, 2.00 mg of pristine and weathered PE were extracted from freshwater; whereas, using the same amount of the nanocomposite, 7.92 mg of pristine TWP and 6.87 mg of weathered TWP were extracted. The retrieval of weathered TWP was 13% less than that of pristine TWP, which can be attributed to the increasing hydrophilicity of weathered TWP. The results reveal that the effectiveness of the magnetic separation technique varies among different polymer types and their sizes; the weathering of MPs also influences the magnetic separation efficiency.

Effects of aging on environmental behavior of plastic additives: Migration, leaching, and ecotoxicity

Microplastics (MPs), an emerging pollutant, are of global concern due to their wide distribution and large quantities. In addition to MPs themselves, various additives within MPs (such as plasticizers, flame retardants, antioxidants and heavy metals) may also have harmful effects on the environment. Most of these additives are physically bound to plastics and can therefore be leached from the plastic and released into the environment. Aging of MPs in the actual environment can affect the migration and release of additives, further increasing the ecotoxicological risk of additives to organisms. This work reviews the functions of several commonly used additives in MPs, and summarizes the representative characterization methods. Furthermore, the migration and leaching of additives in the human environment and marine environment are outlined. As aging promotes the internal chain breaking of MPs and the increase of specific surface area, it in turn stimulates the release of additives. The hazards of additive exposure have been elucidated, and various studies from the laboratory have shown that more toxic additives such as phthalates and brominated flame retardants can disrupt a variety of biological processes in organisms, including metabolism, skeletal development and so on. Increase of MPs ecological risk caused by the leaching of toxic additives is discussed, especially under the effect of aging. This study presents a systematic summary of various functional and environmental behaviors of additives in plastics, using weathering forces as the main factor, which helps to better assess the environmental impact and potential risks of MPs.

Influence of sludge treatment methods on behaviors of microplastics adsorbed cadmium and its driving factors

The complicated contamination of microplastics (MPs) and heavy metals in sludge has garnered substantial attention in recent years; however, research on the behavior of MPs loading of heavy metals in sludge after sludge treatment methods is limited. Four representative sludge treatment methods were selected herein: anaerobic digestion, thermal drying, thermal hydrolysis (TH), and aerobic composting. Before and after sludge treatment, the chemical bonding of MPs, cadmium (Cd) adsorption properties, and metabolic changes in the microbial community succession was analyzed, and the factors influencing differences in Cd sorption by sludge MPs were explored. The results revealed that Cd adsorption by MPs occurs as multilayer physical adsorption that can be well fitted by Freundlich isotherms. Compared with the other three treatments, TH led to the most significant effect on the chemical bonding properties of the MPs, with a more than two-fold increase in C-O single bonds and CO double bonds, as well as adsorption of the highest amount of Cd at 767 μg/g. In addition, sludge conductivity and water content also affected Cd sorption capacity, with correlation coefficients of 0.405 and -0.384. Pedobacter, Flavobacterium, Lysobacter, and Sphingobacterium in the sludge presented a high degree of coupling with adsorption capacity, it was inferred that the above dominant species of bacteria may affect the adsorption of Cd by microplastics through the production of extracellular enzyme forms.

Sorption of selected pharmaceutical compounds on polyethylene microplastics: Roles of pH, aging, and competitive sorption

Microplastics (MPs) as the carrier of pharmaceuticals in aquatic environments have been concerned in recent years. However, the influences of environmental factors on the sorption of pharmaceuticals onto MPs, particularly the effect of the simultaneous sorption by MPs of different pharmaceuticals in multi-solute systems are still unclear. This study investigated the influences of pH, aging of MPs, and competition of pharmaceuticals on the sorptions of sulfamethoxazole (SMX), propranolol (PRP), and sertraline (SER) onto polyethylene MPs. In the 96 h pH-dependent experiments, the sorptions of the three pharmaceuticals were mainly driven by hydrophobic interaction. Besides, the ionization states of the three pharmaceuticals varied with the pH ranging from 2.00 to 12.00, and electrostatic interaction would affect the sorption affinities of the pharmaceuticals in different ionization states. In the aged MPs experiments, the MPs aged by UV irradiation showed a stronger sorption capacity than the pristine ones. Across the MPs under different UV irradiation durations, the 6 d aged MPs showed the highest sorption percentages of 23.0% and 17.6% for SER and PRP, respectively; for SMX, the highest sorption percentage of 5.4% was recorded with the 10 d aged MPs. In the multi-solute systems, the sorption kinetics of the three pharmaceuticals fit well with the pseudo-second-order model. The sorption quantities of the three pharmaceuticals onto MPs followed the order of SER cations (18.70 μg g^-1) > SMX anions (7.83 μg g^-1) > PRP cations (3.80 μg g^-1) at pH 7.00. The good fitting of the Freundlich model suggested a multilayer sorption of the three pharmaceuticals onto MPs. The SER with higher hydrophobicity would preferentially be adsorbed onto MPs and influenced the subsequently sorption processes of the other pharmaceuticals via electrostatic interactions. This may change the environmental fate of the contaminants, which should be carefully considered in future work.

One is not enough: Monitoring microplastic ingestion by fish needs a multispecies approach

The development of monitoring programs based on bioindicators is crucial for assessing the impact of microplastic ingestion on marine organisms. This study presents results from an Italian pilot action aimed at investigating the suitability of a monitoring strategy based on a multispecies approach. The benthic-feeder Mullus barbatus, the demersal species Merluccius merluccius, and the pelagic-feeder species of the genus Scomber were used to assess the environmental contamination by microplastics in three different marine areas, namely Ancona (Adriatic Sea), Anzio (Tyrrhenian Sea), and Oristano (Western Sardinia). Microplastic ingestion frequencies were higher in samples from Anzio (26.7 %) and Ancona (25.0 %) than Oristano (14.4 %), suggesting a relationship between microplastic bioavailability and the proximity to urban settlements and river flows. Furthermore, microplastic ingestion was affected by the feeding habits of the examined species. The detected differences reinforce the hypothesis that a multispecies approach is needed to evaluate microplastic ingestion by marine animals.

Micro(nano)plastics and plastic additives effects in marine annelids: A literature review

Plastic debris are dispersed in the marine environment and are consequently available to many organisms of different trophic levels, including sediment-dwelling organisms such as polychaetae. Plastic degradation generates micro (MPs) and nanoplastics (NPs) and as well as releases bounded plastic additives, increasing the ecotoxicological risk for marine organisms. Therefore, this review summarizes current knowledge on the accumulation and effects of MPs and NPs and plastic additives in polychaetes, derived from laboratory and field evidences. Thirty-six papers (from January 2011 to September 2021) were selected and analysed: about 80% of the selected works were published since 2016, confirming the emerging role of this topic in environmental sciences. The majority of the analysed manuscripts (68%) were carried out in the laboratory under controlled conditions. These studies showed that polychaetes accumulate and are responsive to this contaminant class, displaying behavioural, physiological, biochemical and immunological alterations. The polychaetes Hediste diversicolor and Arenicola marina were the most frequent used species to study MPs, NPs and plastic additive effects. The consideration of field studies revealed that MP accumulation was dependent on the plastic type present in the sediments and on the feeding strategy of the species. Polychaetes are known to play an important role in coastal and estuarine food webs and exposure to MPs, NPs and plastic additives may impair their behavioural, physiological, biochemical and immunological responses. Thus, the estimated global increase of these contaminants in the marine environment could affect the health of these benthic organisms, with consequences at population and ecosystem levels.

Adsorption of tetracycline and Cd(II) on polystyrene and polyethylene terephthalate microplastics with ultraviolet and hydrogen peroxide aging treatment

Microplastics (MPs) could serve as vectors of antibiotics and heavy metals through sorption and desorption. However, the combined adsorption process of antibiotics and heavy metals on aged MPs has rarely been studied. In this study, combined adsorption/desorption of tetracycline (TC) and Cd(II) on/from polystyrene (PS) and polyethylene terephthalate (PET) MPs, as well as ultraviolet (UV) and H₂O₂ aged MPs, was investigated. The specific surface areas of the MPs increased after UV and H₂O₂ aging. Adsorption experiments showed that the pseudo-second-order kinetic model and Freundlich model fitted adsorption of TC and Cd(II) on all of the MPs. The adsorption capacities of TC and Cd(II) were higher on aged MPs than on the pristine MPs, especially on H₂O₂ treated MPs. TC adsorption on the MPs was hardly affected by Cd(II), and Cd(II) adsorption was not significantly affected by TC when the solution pH value was below 8.0. Cd(II) slightly enhanced TC adsorption on the MPs at pH 8.0, especially on the aged MPs. The TC adsorption capacities increased with increasing pH, reaching a maximum at pH 5.0 or 6.0, and they then decreased, while the largest level of Cd(II) adsorption was at approximately pH 6.0. Adsorption of TC and Cd(II) on the pristine and aged MPs was thermodynamically favorable and spontaneous. The trend of the desorption rates of TC and Cd(II) from the MPs in different background solutions was ultrapure water < surface water < simulated gastric fluid. The desorption rates of TC and Cd(II) from the aged MPs were lower than those from the pristine MPs. The results revealed the mechanism of the TC and Cd(II) combined adsorption process on aged MPs, which will provide insight for understanding the aging process and its potential effects on sorption and desorption of antibiotics and heavy metals in the real environment.

Microplastic/nanoplastic toxicity in plants: an imminent concern

The toxic impact of microplastics/nanoplastics (MPs/NPs) in plants and the food chain has recently become a top priority. Several research articles highlighted the impact of MPs/NPs on the aquatic food chain; however, very little has been done in the terrestrial ecosystem. A number of studies revealed that MPs/NPs uptake and subsequent translocation in plants alter plant morphological, physiological, biochemical, and genetic properties to varying degrees. However, there is a research gap regarding MPs/NPs entry into plants, associated factors influencing phytotoxicity levels, and potential remediation plans in terms of food safety and security. To address these issues, all sources of MPs/NPs intrusion in agroecosystems should be revised to avoid these hazardous materials with special consideration as preventive measures. Furthermore, this review focuses on the routes of accumulation and transmission of MPs/NPs into plant tissues, related aspects influencing the intensity of plant stress, and potential solutions to improve food quality and quantity. This paper also concludes by providing an outlook approach of applying exogenous melatonin and introducing engineered plants that would enhance stress tolerance against MPs/NPs. In addition, an overview of inoculation of beneficial microorganisms and encapsulated enzymes in soil has been addressed, which would make the degradation of MPs/NPs faster.

Effects of Biofilms on Trace Metal Adsorption on Plastics in Freshwater Systems

The formation of plastisphere on plastics and their potential impact on freshwater ecosystems have drawn increasing attention. However, there is still limited information about the effects of plastisphere on the heavy metal adsorption capacity and the related mechanism of plastic debris in different freshwaters. Herein, the trace metal adsorption capacity, kinetics and adsorption mechanisms of virgin and biofilm-covered plastic debris were investigated. Polypropylene (PP) and polyethylene terephthalate (PET) plastic debris were placed in three freshwaters (Xuanwu Lake, Donghu Lake and the Qinhuai River) for 45 days to incubate biofilms. Batch adsorption experiments were performed to compare the adsorption processes of trace metal on virgin and biofilm-covered plastics. Results showed that biofilms increase the adsorption of metals on plastics, and the adsorption isotherms were well fitted by the Langmuir model. Furthermore, the adsorption capacities for lead (Pb(II)) were higher than that of cadmium (Cd(II)) and zinc (Zn(II)), with 256.21 and 277.38 μg/g (Pb(II)) adsorbed in biofilm-covered PP and PET, respectively, in Xuanwu Lake. The adsorption kinetics of metals on plastic debris were significantly affected by the biofilms, by switching the intraparticle diffusion for virgin plastic debris to film diffusion for the biofilm-covered plastic debris. Moreover, the complexation of functional groups within the biofilms might mainly contribute to the increases of metal adsorption, involving the participation of oxygen and nitrogen groups. Overall, these results suggested that biofilms reinforce the potential role of plastics as a carrier of trace metals in freshwaters.

Gender difference in hepatic AMPK pathway activated lipid metabolism induced by aged polystyrene microplastics exposure

Microplastics (MPs) pollution becomes an increasing concern and researchers keep exploring the health effects caused by MPs exposure. The ageing process in the environment significantly alters the physicochemical characteristics of MPs and subsequently affects their toxicities. The health effects of aged MPs exposure and the mechanism underlying are worthy of exploration. Polystyrene microplastics (PS-MPs) (with size less than 50 µm) were obtained by grinding and screening polystyrene materials. PS-MPs continued to be aged by ozone treatment (0.4 mg/min, 9 h). Both male and female C57BL/6 mice were orally exposed to 0 or 2 mg/kg/d aged PS-MPs for 28 days. Results showed that PS-MPs were found in liver, ovary and spleen of females and liver, testis and spleen of males in the aged PS-MPs group. Exposure to aged PS-MPs significantly decreased abdominal fat/body coefficient, the adipocyte size and the serum LDL-C level in females. Compared to the control, serum estradiol (E2) level, the mRNA expression levels of genes regulating E2 production (17β-hsd, 3β-hsd and Star) in ovary and the protein expression levels of E2 receptors (ERα, ERβ), AMPKα and p-AMPKα1 in liver increased significantly, and the mRNA expression levels of AMP-activated protein kinase (AMPK) downstream genes (Srebp-1c, Fas and Scd1) in liver decreased significantly in the female aged PS-MPs group. Liver metabolomic profiling showed that differential metabolites between female aged PS-MPs group and female control group were enriched in biotin metabolism and the level of biotin increased significantly in the female aged PS-MPs group. However, no significant changes were detected in males. These results indicated that aged PS-MPs exposure increased ovarian E2 production and activated the AMPK pathway in the liver which might inhibit liver lipid synthesis only in females. Our findings provide new insights into the potential sex-specific health effects of environmental MPs pollution.

Change in adsorption behavior of aquatic humic substances on microplastic through biotic and abiotic aging processes

Interactions between microplastics (MPs) and humic substances (HS) are inevitable in MP-contaminated aquatic environment because of the ubiquitous presence of HS. In this study, we explored the effects of abiotic and biotic aging processes on the adsorption behavior of aquatic HS on MPs. Aging experiments were conducted using polyethylene (PE) as a representative MP, in which UV irradiation and microbial incubation were applied for 15 to 18 days to mimic the natural abiotic and biotic aging processes. Surface modifications after the aging treatments were evidenced by the appearance of CO, CO, O-C=O, and -OH groups; the formation of grooves on UV-aged PE; and the formation of biofilms on the surface of bio-aged PE. The specific surface areas of both treated PE MPs increased with aging. Higher HS adsorption on PE surface was observed after the aging treatments, with a highest kinetic rate for UV-aged PE than that for bio-aged PE. The adsorption isotherm models revealed that the aging processes enhanced the HS adsorption tendency, as evidenced by the highest adsorption capacity for UV-aged PE (~187 μg C/m²), followed by bio-aged PE (~157 μg C/m²) and pristine PE (~87.5 μg C/m²) for a comparable extended aging period (15-18 days). The difference was more pronounced at a lower pH. The enhanced HS adsorption was mainly attributed to the formation of hydrogen bonds, whereas HS adsorption on pristine PE was dominated by hydrophobic interactions and weak van der Waals interactions. Among the two identified fluorescent components (terrestrial humic-like C1 and protein-like C2), C1 exhibited a higher affinity for adsorption onto PE irrespective of aging. Our findings provide insights into the substantial changes that occur in the interactions between MPs and aquatic organic matter with aging processes, which may alter the fate and environmental impacts of MPs in many aquatic systems.

Immobilized BiOCl0.75I0.25/g-C3N4 nanocomposites for photocatalytic degradation of bisphenol A in the presence of effluent organic matter

The BiOCl_0.75I_0.25/g-C₃N₄ nanosheet (BCI-CN) was successfully immobilized on polyolefin polyester fiber (PPF) through the hydrothermal method. The novel immobilized BiOCl_0.75I_0.25/g-C₃N₄ nanocomposites (BCI-CN-PPF) were characterized by scanning electron microscope (SEM), energy dispersive spectroscopy EDS, X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and UV-vis diffuse reflectance spectroscopy (UV-vis DRS) to confirm that BCI-CN was successfully immobilized on PPF with abundant oxygen vacancies reserved. Under simulated solar light irradiation, 100 % of bisphenol A (BPA) with an initial concentration of 10 mg·L^-1 was degraded by BCI-CN-PPF (0.2 g·L^-1 of BCI-CN immobilized) after 60 min. A similar photocatalytic efficiency of BPA was obtained in the presence of effluent organic matter (EfOM). The photocatalytic degradation of BPA was not affected by EfOM <5 mg-C/L. In comparison, the photocatalytic performance was considerably inhibited by EfOM with a concentration of 10 mg-C/L. Furthermore, photogenerated holes and superoxide radicals predominated in the photocatalytic degradation processes of BPA. The total organic carbon (TOC) removal efficiencies of BPA and EfOM were 75.2 % and 50 % in the BCI-CN-PPF catalytic system. The BPA removal efficiency of 94.9 % was still achieved in the eighth cycle of repeated use. This study provides a promising immobilized nanocomposite with high photocatalytic activity and excellent recyclability and reusability for practical application in wastewater treatment.

Ecotoxicological and health implications of microplastic-associated biofilms: a recent review and prospect for turning the hazards into benefits

Microplastics (MPs), over the years, have been regarded as a severe environmental nuisance with adverse effects on our ecosystem as well as human health globally. In recent times, microplastics have been reported to support biofouling by genetically diverse organisms resulting in the formation of biofilms. Biofilms, however, could result in changes in the physicochemical properties of microplastics, such as their buoyancy and roughness. Many scholars perceived the microplastic-biofilm association as having more severe consequences, providing evidence of its effects on the environment, aquatic life, and nutrient cycles. Furthermore, other researchers have shown that microplastic-associated biofilms have severe consequences on human health as they serve as vectors of heavy metals, toxic chemicals, and antibiotic resistance genes. Despite what is already known about their adverse effects, other interesting avenues are yet to be fully explored or developed to turn the perceived negative microplastic-biofilm association to our advantage. The major inclusion criteria for relevant literature were that it must focus on microplastic association biofilms, while we excluded papers solely on biofilms or microplastics. A total of 242 scientific records were obtained. More than 90% focused on explaining the environmental and health impacts of microplastic-biofilm association, whereas only very few studies have reported the possibilities and opportunities in turning the microplastic biofilms association into benefits. In summary, this paper concisely reviews the current knowledge of microplastic-associated biofilms and their adverse consequences and further proposes some approaches that can be developed to turn the negative association into positive.

Ecotoxic effects of microplastics and contaminated microplastics - Emerging evidence and perspective

The high prevalence and persistence of microplastics (MPs) in pristine habitats along with their accumulation across environmental compartments globally, has become a matter of grave concern. The resilience conferred to MPs using the material engineering approaches for outperforming other materials has become key to the challenge that they now represent. The characteristics that make MPs hazardous are their micro to nano scale dimensions, surface varied wettability and often hydrophobicity, leading to non-biodegradability. In addition, MPs exhibit a strong tendency to bind to other contaminants along with the ability to sustain extreme chemical conditions thus increasing their residence time in the environment. Adsorption of these co-contaminants leads to modification in toxicity varying from additive, synergistic, and sometimes antagonistic, having consequences on flora, fauna, and ultimately the end of the food chain, human health. The resulting environmental fate and associated risks of MPs, therefore greatly depend upon their complex interactions with the co-contaminants and the nature of the environment in which they reside. Net outcomes of such complex interactions vary with core characteristics of MPs, the properties of co-contaminants and the abiotic factors, and are required to be better understood to minimize the inherent risks. Toxicity assays addressing these concerns should be ecologically relevant, assessing the impacts at different levels of biological organization to develop an environmental perspective. This review analyzed and evaluated 171 studies to present research status on MP toxicity. This analysis supported the identification and development of research gaps and recommended priority areas of research, accounting for disproportionate risks faced by different countries. An ecological perspective is also developed on the environmental toxicity of contaminated MPs in the light of multi-variant stressors and directions are provided to conduct an ecologically relevant risk assessment. The presented analyses will also serve as a foundation for developing environmentally appropriate remediation methods and evaluation frameworks.

Heavy metal remediation from wastewater using microalgae: Recent advances and future trends

Microalgae-based wastewater treatment has previously been carried out in huge waste stabilization ponds. Microalgae, which can absorb carbon dioxide while reusing nutrients from sewage, has recently emerged as a new trend in the wastewater treatment business. Microalgae farming is thought to be a potential match for the modern world's energy strategy, which emphasizes low-cost and environmentally benign alternatives. Microalgae are being used to treat wastewater and make useful products. Microalgae, for example, is a promising renewable resource for producing biomass from wastewater nutrients because of its quick growth rate, short life span, and high carbon dioxide utilization efficacy. Microalgae-based bioremediation has grown in importance in the treatment of numerous types of wastewater in recent years. This solar-powered wastewater treatment technology has huge potential. However, there are still issues to be resolved in terms of land requirements, as well as the process's ecological feasibility and long-term viability, before these systems can be widely adopted. Due to cost and the need for a faultless downstream process, it is difficult to deploy this technology on a large scale. Other recent breakthroughs in wastewater microalgae farming have been investigated, such as how varied pressures affect microalgae growth and quality, as well as the number of high-value components produced. In this review, the future of this biotechnology has also been examined.

Sorption of pharmaceuticals over microplastics' surfaces: interaction mechanisms and governing factors

Microplastics are one of the emerging and ubiquitous environmental pollutants. Recent studies have proven their co-existence with pharmaceuticals in the environment wherein microplastics act as a potential vector for the transportation of pharmaceuticals. Both microplastics and pharmaceuticals are charged moieties enriched with diverse functional groups resulting in the possibility of multiple interactions. Major interactions could be electrostatic, hydrogen bonding, and hydrophobic, while minor interactions may occur through π-π interaction, cationic bridging mechanism, van der Waals interaction, partition, and pore-filling mechanism. These interactions have both short- and long-term effects over pharmaceutical sorption on microplastics and possibly, ensuing toxicity. This review analyses and summarises the currently reported interactions between microplastic particles and pharmaceuticals as well as establishes the link to various factors affecting the process, viz. pH, salinity, dissolved organic matter, and physiochemical properties of microplastics.

Alkaline aging significantly affects Mn(II) adsorption capacity of polypropylene microplastics in water environments: Critical roles of natural organic matter and colloidal particles

Most microplastic particles may undergo various aging in water environments. In this work, surface physicochemical properties were firstly compared among pristine polypropylene (PP-pris) microplastics, and two aged ones obtained after pretreated with HCl (PP-acid) and NaOH (PP-alka). When compared with PP-pris and PP-acid, PP-alka had a much stronger Mn(II) adsorption capacity. The results regarding the role of natural organic matter and colloidal particle concentrations on adsorption demonstrated that for water solutions either containing kaolin or not, humic acid (HA) had significantly negative influence on Mn(II) adsorption capacity of PP-alka due to their complexation and competition effects, and its negative influence became enhanced with increasing kaolin concentrations. Besides, established conceptual models of adsorption were applied to comprehensively explore adsorption mechanisms of PP-alka for Mn(II) in the coexistence of HA and kaolin. An important suggestion was that in complicated adsorption-reactor system, great numbers of microplastics-kaolin heteroaggregates might be formed via ion bridging of Mn(II) and/or polymer bridging of HA. So these formed aggregates were possible to re-organize themselves, under pre-set vibration-speed conditions, for achieving a more stable structure. As a consequence, Mn(II) adsorption behaviors would be affected by changes in steric-hindrance effects of HA molecules and surface charge distribution of resultant heteroaggregates.

Microbial enzymes will offer limited solutions to the global plastic pollution crisis

Global economies depend on the use of fossil-fuel-based polymers with 360-400 million metric tons of synthetic polymers being produced per year. Unfortunately, an estimated 60% of the global production is disposed into the environment. Within this framework, microbiologists have tried to identify plastic-active enzymes over the past decade. Until now, this research has largely failed to deliver functional biocatalysts acting on the commodity polymers such as polyethylene (PE), polypropylene (PP), polyvinylchloride (PVC), ether-based polyurethane (PUR), polyamide (PA), polystyrene (PS) and synthetic rubber (SR). However, few enzymes are known to act on low-density and low-crystalline (amorphous) polyethylene terephthalate (PET) and ester-based PUR. These above-mentioned polymers represent >95% of all synthetic plastics produced. Therefore, the main challenge microbiologists are currently facing is in finding polymer-active enzymes targeting the majority of fossil-fuel-based plastics. However, identifying plastic-active enzymes either to implement them in biotechnological processes or to understand their potential role in nature is an emerging research field. The application of these enzymes is still in its infancy. Here, we summarize the current knowledge on microbial plastic-active enzymes, their global distribution and potential impact on plastic degradation in industrial processes and nature. We further outline major challenges in finding novel plastic-active enzymes, optimizing known ones by synthetic approaches and problems arising through falsely annotated and unfiltered use of database entries. Finally, we highlight potential biotechnological applications and possible re- and upcycling concepts using microorganisms.

The effects of salinity, temperature, and UV irradiation on leaching and adsorption of phthalate esters from polyethylene in seawater

In this study, the leaching of six phthalic acid esters (PAEs) from three common consumer plastics was investigated: low and high density polyethylene (LDPE, HDPE) and recycled polyethylene (RP). The effects of salinity, temperature, and ultraviolet irradiation (UVR) on leaching were investigated. The study of leaching of phthalates in aqueous environments in batch experiments is challenging due to their readsorption by the high hydrophobicity of PAEs, and there are no standard methods to study release processes. Here with the experiments, leaching (A) and spiking (B) using six PAEs to study the readsorption in the leaching process. PAEs were identified and quantified using GC-MS. Dibutyl phthalate (DBP) and benzyl butyl phthalate (DEHP) showed considerable leaching during the 5-day incubation: 14 ± 1 to 128 ± 14 and 25 ± 2 to 79 ± 5 ng/cm², respectively, under UVR, corresponding approximately to (1.9-13%) and (12.4-22.4%) of the solvent extracted mass. The highest K_d values were measured for RP polymers (0.3-9.4), followed by LDPE (0.5-5.4) and HDPE (0.2-2.2) polymers. Thus, readsorption of PAEs at the surface removed 30-80% of the leached PAEs in the dissolved phase. For example in LDPE, the calculated total release of DBP was up to 54 ± 4 ng/cm², while the dissolved amount was 8.5 ± 1 ng/cm² during the 5-day incubation under freshwater conditions. Increasing salinity negatively affected the leaching rate, which decreased for DBP from 54 ± 4 ng/cm² in freshwater to 44 ± 3 and 38 ± 3 ng/cm² at salinity of 20 and 40 g/L, respectively, from LDPE during the 5-day incubation. Temperature and UVR had a positive effect on the leaching rate, with the release of DBP from LDPE increasing from 44 ± 3 ng/cm² at room temperature (25 °C) to 60 ± 6 and 128 ± 14 ng/cm² at high temperature (40 °C) and UVR, respectively. Overall, this study highlights the positive relationship between temperatures, UVR on the extent of leaching and surface adsorption on the leaching measurements.