Nanoparticle aggregation: challenges to understanding transport and reactivity in the environment

Controlled evaporation-induced phase separation of droplets containing nanogels and salt molecules

Droplets without protection from surfactants or surfactant-like objects normally experience merging or a coalescence process since it is thermodynamically favored. However, division or replication of droplets is thermodynamically unfavored and comparably more difficult to realize. Herein, we demonstrate that a population of droplets that are composed of nanogels and salt spontaneously undergo a separation process under a slow solvent evaporation condition. Each individual droplet underwent changes in size, shape and eventually developed into two domains, which was caused by the screening effect due to the increased salt concentration as a result of solvent evaporation. The two domains gradually separated into nanogel-rich and salt-rich parts. These two parts eventually evolved into nanogel aggregates and branched structures, respectively. This separation was mainly due to the salting out effect and dewetting. Comparison studies indicate that both the nanogels and salt are indispensable ingredients for the phase separation. These discoveries may have profound applications in the fields of biomimetics and offer new routes for self-replication systems.

An individual droplet containing nanogels and salts can evolve into gel-rich and salt-rich two separate parts upon evaporation.

Selective photocatalytic reduction of selenate over TiO2 in the presence of nitrate and sulfate in mine-impacted water

Selenium contamination is a critical global issue across numerous industries. Industrial waters such as mine-impacted water (MIW) can contain toxic levels of selenate, in addition to varying concentrations of many different dissolved species from the underlying strata, such as sulfate, carbonate, nitrate, organic matter, and many dissolved metals. The removal of selenate from MIW is desired, due to selenate's acute and chronic toxicity in aquatic ecosystems at elevated concentrations. However, due to the complexity of the water matrix and the presence of many other dissolved constituents, this is often very challenging. In this study, we present for the first time the reduction of selenate in a real industrial wastewater, namely MIW, and reveal a significant advantage of photocatalytic reduction; the ability to selectively reduce selenate from >500 μg L^-1 to <2 μg L^-1 in the presence of the more energetically favourable electron acceptor, nitrate (250× molar concentration of selenate) and high concentrations of sulfate (1,940× molar concentration of selenate). The presence and impacts of sulfate, chloride, carbonate, and nitrate on the competitive adsorption and reduction of selenate on TiO₂ are thoroughly investigated for the first time, using formic acid as an electron hole scavenger. The electron transfer mechanism proposed follows TiO₂ conduction band electrons are responsible for the reduction of selenate to elemental Se (Se⁰) and both carbon dioxide radicals (CO₂^·-) and Se conduction band electrons are responsible for the further reduction of Se⁰ to hydrogen selenide (H₂Se).

Soft Bioelectronics Based on Nanomaterials

Recent advances in nanostructured materials and unconventional device designs have transformed the bioelectronics from a rigid and bulky form into a soft and ultrathin form and brought enormous advantages to the bioelectronics. For example, mechanical deformability of the soft bioelectronics and thus its conformal contact onto soft curved organs such as brain, heart, and skin have allowed researchers to measure high-quality biosignals, deliver real-time feedback treatments, and lower long-term side-effects in vivo. Here, we review various materials, fabrication methods, and device strategies for flexible and stretchable electronics, especially focusing on soft biointegrated electronics using nanomaterials and their composites. First, we summarize top-down material processing and bottom-up synthesis methods of various nanomaterials. Next, we discuss state-of-the-art technologies for intrinsically stretchable nanocomposites composed of nanostructured materials incorporated in elastomers or hydrogels. We also briefly discuss unconventional device design strategies for soft bioelectronics. Then individual device components for soft bioelectronics, such as biosensing, data storage, display, therapeutic stimulation, and power supply devices, are introduced. Afterward, representative application examples of the soft bioelectronics are described. A brief summary with a discussion on remaining challenges concludes the review.

Synergistic Effect of Metal Cations and Visible Light on 2D MoS2 Nanosheet Aggregation

Aggregation significantly influences the transport, transformation, and bioavailability of engineered nanomaterials. Two-dimensional MoS₂ nanosheets are one of the most well-studied transition-metal dichalcogenide nanomaterials. Nonetheless, the aggregation behavior of this material under environmental conditions is not well understood. Here, we investigated the aggregation of single-layer MoS₂ (SL-MoS₂) nanosheets under a variety of conditions. Trends in the aggregation of SL-MoS₂ are consistent with classical Derjaguin-Landau-Verwey-Overbeek (DLVO) colloidal theory, and the critical coagulation concentrations of cations follow the order of trivalent (Cr³⁺) < divalent (Ca²⁺, Mg²⁺, Cd²⁺) < monovalent cations (Na⁺, K⁺). Notably, Pb²⁺ and Ag⁺ destabilize MoS₂ nanosheet suspensions much more strongly than do their divalent and monovalent counterparts. This effect is attributable to Lewis soft acid-base interactions of cations with MoS₂. Visible light irradiation synergistically promotes the aggregation of SL-MoS₂ nanosheets in the presence of cations, which was evident even in the presence of natural organic matter. The light-accelerated aggregation was ascribed to dipole-dipole interactions due to transient surface plasmon oscillation of electrons in the metallic 1T phase, which decrease the aggregation energy barrier. These results reveal the phase-dependent aggregation behaviors of engineered MoS₂ nanosheets with important implications for environmental fate and risk.

Peptide-Functionalized Dendrimer Nanocarriers for Targeted Microdystrophin Gene Delivery

Gene therapy is a good alternative for determined congenital disorders; however, there are numerous limitations for gene delivery in vivo including targeted cellular uptake, intracellular trafficking, and transport through the nuclear membrane. Here, a modified G5 polyamidoamine (G5 PAMAM) dendrimer-DNA complex was developed, which will allow cell-specific targeting to skeletal muscle cells and transport the DNA through the intracellular machinery and the nuclear membrane. The G5 PAMAM nanocarrier was modified with a skeletal muscle-targeting peptide (SMTP), a DLC8-binding peptide (DBP) for intracellular transport, and a nuclear localization signaling peptide (NLS) for nuclear uptake, and polyplexed with plasmid DNA containing the GFP-tagged microdystrophin (µDys) gene. The delivery of µDys has been considered as a therapeutic modality for patients suffering from a debilitating Duchenne muscular dystrophy (DMD) disorder. The nanocarrier-peptide-DNA polyplexes were prepared with different charge ratios and characterized for stability, size, surface charge, and cytotoxicity. Using the optimized nanocarrier polyplexes, the transfection efficiency in vitro was determined by demonstrating the expression of the GFP and the µDys protein using fluorescence and Western blotting studies, respectively. Protein expression in vivo was determined by injecting an optimal nanocarrier polyplex formulation to Duchenne model mice, mdx^4Cv. Ultimately, these nanocarrier polyplexes will allow targeted delivery of the microdystrophin gene to skeletal muscle cells and result in improved muscle function in Duchenne muscular dystrophy patients.

Core@shell structured ceria@mesoporous silica nanoantibiotics restrain bacterial growth in vitro and in vivo

Due to its modular and flexible design options, mesoporous silica provides ample opportunities when developing new strategies for combinatory antibacterial treatments. In this study, antibacterial ceria (CeO₂) nanoparticles (NP) were used as core material, and were further coated with a mesoporous silica shell (mSiO₂) to obtain a core@shell structured nanocomposite (CeO₂@mSiO₂). The porous silica shell was utilized as drug reservoir, whereby CeO₂@mSiO₂ was loaded with the antimicrobial agent capsaicin (CeO₂@mSiO₂/Cap). CeO₂@mSiO₂/Cap was further surface-coated with the natural antimicrobial polymer chitosan by employing physical adsorption. The obtained nanocomposite, CeO₂@mSiO₂/Cap@Chit, denoted NAB, which stands for "nanoantibiotic", provided a combinatory antibacterial mode of action. The antibacterial effect of NAB on the Gram-negative bacteria Escherichia coli (E.coli) was proven to be significant in vitro. In addition, in vivo evaluations revealed NAB to inhibit the bacterial growth in the intestine of bacteria-fed Drosophila melanogaster larvae, and decreased the required dose of capsaicin needed to eliminate bacteria. As our constructed CeO₂@mSiO₂ did not show toxicity to mammalian cells, it holds promise for the development of next-generation nanoantibiotics of non-toxic nature with flexible design options.

Exposure of humic acid-coated goethite colloids to groundwater does not affect their adsorption of metal(loid)s and their impact on Daphnid mobility

Engineered humic acid-coated goethite (HA-Goe) colloids find increasing application in in situ remediation of metal(loid)-polluted groundwater. Once introduced into the subsurface, the colloids interact with groundwater altering their physicochemical properties. In comparison to freshly synthesized, unreacted HA-Goe colloids, such alterations could reduce the adsorption affinity towards metal(loid)s and also result in altered ecotoxicological effects. In our study, HA-Goe colloids were exposed to two groundwaters (low vs. high concentrations of metal(loid)s) from two metal(loid)-contaminated sites for 87 days. We investigated (i) the course of HA-Goe ecotoxicity (Daphnia magna immobilization tests), (ii) HA-Goe adsorption properties (multi-element solutions containing As, Cu, Zn, Ni and Co), and (iii) changes in the chemical composition as well as in the mineral and aggregate properties of HA-Goe. The adsorption affinity of HA-Goe decreased in the order As ≈ Cu ≫ Zn > Ni ≈ Co. The metal(loid) adsorption occurred rapidly after mixing prior to the first sampling, while the duration of ongoing exposition to groundwater had no effect on the adsorption of these metal(loid)s. We neither observed a desorption of humic acids from the goethite surface nor alterations in the mineralogy, crystallinity, and surface properties of HA-Goe. Standardized Daphnia magna immobilization tests showed an increased number of mobile organisms with increasing exposure time of HA-Goe to both groundwaters. The decrease in HA-Goe-mediated immobilization of D. magna was strongest within the first 30 d. We attribute this to a shift to smaller sizes due to the breakdown of large HA-Goe aggregates, particularly within the first 30 d. The breakdown of these μm-sized aggregates may result mainly from the repeated shaking of the HA-Goe suspensions. Our study confirms within this particular setting that the tested HA-Goe colloids are suitable for the long-term immobilization of metal(loid)s, while lethal effects on D. magna were negligible.

Intra-Organ Delivery of Nanotherapeutics for Organ Transplantation

Targeted delivery of therapeutics through the use of nanoparticles (NPs) has emerged as a promising method that increases their efficacy and reduces their side effects. NPs can be tailored to localize to selective tissues through conjugation to ligands that bind cell-specific receptors. Although the vast majority of nanodelivery platforms have focused on cancer therapy, efforts have begun to introduce nanotherapeutics to the fields of immunology as well as transplantation. In this review, we provide an overview from a clinician's perspective of current nanotherapeutic strategies to treat solid organ transplants with NPs during the time interval between organ harvest from the donor and placement into the recipient, an innovative technology that can provide major benefits to transplant patients. The use of ex vivo normothermic machine perfusion (NMP), which is associated with preserving the function of the organ following transplantation, also provides an ideal opportunity for a localized, sustained, and controlled delivery of nanotherapeutics to the organ during this critical time period. Here, we summarize previous endeavors to improve transplantation outcomes by treating the organ with NPs prior to placement in the recipient. Investigations in this burgeoning field of research are promising, but more extensive studies are needed to overcome the physiological challenges to achieving effective nanotherapeutic delivery to transplanted organs discussed in this review.

The Physical Modeling Analysis of Fate and Transport of Silver Nanoparticles Dispersed by Water Flow

The release of silver nanoparticles (AgNPs) from consumer products into an environment has become a central issue for many countries. Despite that the fate and behaviors of AgNPs incorporated into a wastewater have been investigated by building a model of wastewater treatment process, the transport and retention behaviors of AgNPs influenced by the water flow in a river must be understood. The physical model of simulated river to mimic a natural flow of river was proposed to investigate the behaviors of AgNP transport in the river. The results showed that the large amount of AgNPs deposited on the riverbed as Ag sediment with only 1.26% of AgNPs remained in the water flow. The elemental content of Ag freely dispersed across the riverbed increases from the upstream to downstream area of the simulated river. Verification of the spatial distribution of Ag dispersed along the water flow may contribute to a better understanding of the fate and transport of AgNPs in the aquatic environment.

The emergence, trajectory, and impacts of emerging contaminants publications in the Journal of Environmental Quality

As analytical capabilities in the early 2000s began to enable the detection of chemicals in environmental media at increasingly small concentrations, chemicals with the potential to cause adverse human and ecosystem health effects began to be found nearly ubiquitously worldwide. The types of chemicals that were targeted for analysis included natural and synthetic hormones, human and veterinary pharmaceuticals, chemicals in personal care products, novel pesticides, nanoparticles, microplastics, and other chemicals of natural and synthetic origin. The impacts of these chemicals on environmental and human health in many cases remain unknown. Collectively, these chemicals became known as "emerging contaminants" or "contaminants of emerging concern." Much progress has been made toward understanding the sources of these contaminants in the environment, the processes that control their fate and transport once they are released into the environment, and the ability of technology and/or best management practices to mitigate their occurrence. As the Journal of Environmental Quality (JEQ) celebrates its 50th anniversary, we sought to understand how publications in the journal have made impactful contributions in the research area of emerging contaminants. Here, we present the trajectory of publications in JEQ that have shaped knowledge in this field, highlight the importance of these contributions, and conclude with opportunities for JEQ to continue attracting high-quality emerging contaminants research.

Enthralling the impact of engineered nanoparticles on soil microbiome: A concentric approach towards environmental risks and cogitation

Nanotechnology is an avant-garde field of scientific research that revolutionizes technological advancements in the present world. It is a cutting-edge scientific approach that has undoubtedly a plethora of functions in controlling environmental pollutants for the welfare of the ecosystem. However, their unprecedented utilization and hysterical release led to a huge threat to the soil microbiome. Nanoparticles(NPs) hamper physicochemical properties of soil along with microbial metabolic activities within rhizospheric soils.Here in this review shed light on concentric aspects of NP-biosynthesis, types, toxicity mechanisms, accumulation within the ecosystem. However, the accrual of tiny NPs into the soil system has dramatically influenced rhizospheric activities in terms of soil properties and biogeochemical cycles. We have focussed on mechanistic pathways engrossed by microbes to deal with NPs.Also, we have elaborated the fate and behavior of NPs within soils. Besides, a piece of very scarce information on NPs-toxicity towards environment and rhizosphere communities is available. Therefore, the present review highlights ecological perspectives of nanotechnology and solutions to such implications. We have comprehend certain strategies such as avant-garde engineering methods, sustainable procedures for NP synthesis along with vatious regulatory actions to manage NP within environment. Moreover, we have devised risk management sustainable and novel strategies to utilize it in a rationalized and integrated manner. With this background, we can develop a comprehensive plan about NPs with novel insights to understand the resistance and toxicity mechanisms of NPs towards microbes. Henceforth, the orientation towards these issues would enhance the understanding of researchers for proper recommendation and promotion of nanotechnology in an optimized and sustainable manner.

Behavior of Microplastics in Inland Waters: Aggregation, Settlement, and Transport

Inland waters are the main medium transporting microplastics to the ocean. Aggregation, vertical settlement, and horizontal transport will occur when microplastics enter the inland waterbodies. This paper reviews these behaviors of microplastics in inland waters and their influencing factors. The aggregation of microplastics were divided into homogeneous aggregation and heterogeneous aggregation, which are critical for the settlement of microplastics. The settlement of microplastics in inland water bodies is influenced by microplastic properties (size, density, and shapes) and environmental conditions (microorganisms, sedimental properties, hydraulic conditions, and so on). Horizontal transport of microplastics in water is influenced by hydrologic conditions, rainfall, river morphologies, dams, vegetation, etc. Future perspectives including laboratory simulations and numerical models involving multiple factors, the behaviors of degradable plastics, and the influence of hydrologic conditions have been proposed.

Effect of Physical Characteristics and Hydrodynamic Conditions on Transport and Deposition of Microplastics in Riverine Ecosystem

Microplastic disposal into riverine ecosystems is an emergent ecological hazard that mainly originated from land-based sources. This paper presents a comprehensive review on physical processes involved in microplastics transport in riverine ecosystems. Microplastic transport is governed by physical characteristics (e.g., plastic particle density, shape, and size) and hydrodynamics (e.g., laminar and turbulent flow conditions). High-density microplastics are likely to prevail near riverbeds, whereas low-density particles float over river surfaces. Microplastic transport occurs either due to gravity-driven (vertical transport) or settling (horizontal transport) in river ecosystems. Microplastics are subjected to various natural phenomena such as suspension, deposition, detachment, resuspension, and translocation during transport processes. Limited information is available on settling and rising velocities for various polymeric plastic particles. Therefore, this paper highlights how appropriately empirical transport models explain vertical and horizontal distribution of microplastic in riverine ecosystems. Microplastics interact, and thus feedback loops within the environment govern their fate, particularly as these ecosystems are under increasing biodiversity loss and climate change threat. This review provides outlines for fate and transport of microplastics in riverine ecosystems, which will help scientists, policymakers, and stakeholders in better monitoring and mitigating microplastics pollution.

Titanium and Iron Oxide Nanoparticles for Cancer Therapy: Surface Chemistry and Biological Implications

Currently, cancer is among the most challenging diseases due to its ability to continuously evolve into a more complex muldimentional system, in addition to its high capability to spread to other organs and tissues. In this context, the relevance of nanobiomaterials (NBMs) for the development of new more effective and less harmful treatments is increasing. NBMs provide the possibility of combining several functionalities on a single system, expectedly in a synergic way, to better perform the treatment and cure. However, the control of properties such as colloidal stability, circulation time, pharmacokinetics, and biodistribution, assuring the concentration in specific target tissues and organs, while keeping all desired properties, tends to be dependent on subtle changes in surface chemistry. Hence, the behavior of such materials in different media/environments is of uttermost relevance and concern since it can compromise their efficiency and safety on application. Given the bright perspectives, many efforts have been focused on the development of nanomaterials fulfilling the requirements for real application. These include robust and reproducible preparation methods to avoid aggregation while preserving the interaction properties. The possible impact of nanomaterials in different forms of diagnosis and therapy has been demonstrated in the past few years, given the perspectives on how revolutionary they can be in medicine and health. Considering the high biocompatibility and suitability, this review is focused on titanium dioxide– and iron oxide–based nanoagents highlighting the current trends and main advancements in the research for cancer therapies. The effects of phenomena, such as aggregation and agglomeration, the formation of the corona layer, and how they can compromise relevant properties of nanomaterials and their potential applicability, are also addressed. In short, this review summarizes the current understanding and perspectives on such smart nanobiomaterials for diagnostics, treatment, and theranostics of diseases.

Detecting and Monitoring Hydrogels with Medical Imaging

Hydrogels, water-swollen polymer networks, are being applied to numerous biomedical applications, such as drug delivery and tissue engineering, due to their potential tunable rheologic properties, injectability into tissues, and encapsulation and release of therapeutics. Despite their promise, it is challenging to assess their properties in vivo and crucial information such as hydrogel retention at the site of administration and in situ degradation kinetics are often lacking. To address this, technologies to evaluate and track hydrogels in vivo with various imaging techniques have been developed in recent years, including hydrogels functionalized with contrast generating material that can be imaged with methods such as X-ray computed tomography (CT), magnetic resonance imaging (MRI), optical imaging, and nuclear imaging systems. In this review, we will discuss emerging approaches to label hydrogels for imaging, review the advantages and limitations of these imaging techniques, and highlight examples where such techniques have been implemented in biomedical applications.

Eco-Interactions of Engineered Nanomaterials in the Marine Environment: Towards an Eco-Design Framework

Marine nano-ecotoxicology has emerged with the purpose to assess the environmental risks associated with engineered nanomaterials (ENMs) among contaminants of emerging concerns entering the marine environment. ENMs’ massive production and integration in everyday life applications, associated with their peculiar physical chemical features, including high biological reactivity, have imposed a pressing need to shed light on risk for humans and the environment. Environmental safety assessment, known as ecosafety, has thus become mandatory with the perspective to develop a more holistic exposure scenario and understand biological effects. Here, we review the current knowledge on behavior and impact of ENMs which end up in the marine environment. A focus on titanium dioxide (n-TiO₂) and silver nanoparticles (AgNPs), among metal-based ENMs massively used in commercial products, and polymeric NPs as polystyrene (PS), largely adopted as proxy for nanoplastics, is made. ENMs eco-interactions with chemical molecules including (bio)natural ones and anthropogenic pollutants, forming eco- and bio-coronas and link with their uptake and toxicity in marine organisms are discussed. An ecologically based design strategy (eco-design) is proposed to support the development of new ENMs, including those for environmental applications (e.g., nanoremediation), by balancing their effectiveness with no associated risk for marine organisms and humans.

Effect of Nanoplastic Type and Surface Chemistry on Particle Agglomeration over a Salinity Gradient

Agglomeration of nanoplastics in waters can alter their transport and fate in the environment. Agglomeration behavior of 4 nanoplastics differing in core composition (red- or blue-dyed polystyrene) and surface chemistry (plain or carboxylated poly[methyl methacrylate] [PMMA]) was investigated across a salinity gradient. No agglomeration was observed for carboxylated PMMA at any salinity, whereas the plain PMMA agglomerated at only 1 g/L. Both the red and the blue polystyrene agglomerated at 25 g/L. Results indicate that both composition and surface chemistry can impact how environmental salinity affects plastic nanoparticle agglomeration. Environ Toxicol Chem 2021;40:1822-1828. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Zinc oxide nanoparticles: potential effects on soil properties, crop production, food processing, and food quality

The use of zinc oxide nanoparticles (ZnO NPs) is expected to increase soil fertility, crop productivity, and food quality. However, the potential effects of ZnO NP utilization should be deeply understood. This review highlights the behavior of ZnO NPs in soil and their interactions with the soil components. The review discusses the potential effects of ZnO NPs on plants and their mechanisms of action on plants and how these mechanisms are related to their physicochemical properties. The impact of current applications of ZnO NPs in the food industry is also discussed. Based on the literature reviewed, soil properties play a vital role in dispersing, aggregation, stability, bioavailability, and transport of ZnO NPs and their release into the soil. The transfer of ZnO NPs into the soil can affect the soil components, and subsequently, the structure of plants. The toxic effects of ZnO NPs on plants and microbes are caused by various mechanisms, mainly through the generation of reactive oxygen species, lysosomal destabilization, DNA damage, and the reduction of oxidative stress through direct penetration/liberation of Zn2+ ions in plant/microbe cells. The integration of ZnO NPs in food processing improves the properties of the relative ZnO NP-based nano-sensing, active packing, and food/feed bioactive ingredients delivery systems, leading to better food quality and safety. The unregulated/unsafe discharge concentrations of ZnO NPs into the soil, edible plant tissues, and processed foods raise environmental/safety concerns and adverse effects. Therefore, the safety issues related to ZnO NP applications in the soil, plants, and food are also discussed.

Non-Ionic Surfactants for Stabilization of Polymeric Nanoparticles for Biomedical Uses

Surfactants are essential in the manufacture of polymeric nanoparticles by emulsion formation methods and to preserve the stability of carriers in liquid media. The deposition of non-ionic surfactants at the interface allows a considerable reduction of the globule of the emulsion with high biocompatibility and the possibility of oscillating the final sizes in a wide nanometric range. Therefore, this review presents an analysis of the three principal non-ionic surfactants utilized in the manufacture of polymeric nanoparticles; polysorbates, poly(vinyl alcohol), and poloxamers. We included a section on general properties and uses and a comprehensive compilation of formulations with each principal non-ionic surfactant. Then, we highlight a section on the interaction of non-ionic surfactants with biological barriers to emphasize that the function of surfactants is not limited to stabilizing the dispersion of nanoparticles and has a broad impact on pharmacokinetics. Finally, the last section corresponds to a recommendation in the experimental approach for choosing a surfactant applying the systematic methodology of Quality by Design.

Dissolution of copper oxide nanoparticles is controlled by soil solution pH, dissolved organic matter, and particle specific surface area

Dissolution is the primary process affecting the bioavailability and toxicity of nanoscale copper oxide (nano-CuO) to plants and soil organisms. In this study, particle morphology, organic acid, and soil properties were considered to understand the dissolution characteristics of nano-CuO in soil solutions. The results showed that the copper ions (Cu²⁺) released from spherical nano-CuO (CuO NPs), tubular nano-CuO (CuO NTs), and spherical microsized CuO (CuO MPs) in the ten soil solutions were 26.6-4194.0 μg/L, 4.90-217.1 μg/L, and 10.8-326.0 μg/L, respectively. The concentration of Cu²⁺ was negatively correlated with the pH of the soil solution and positively correlated with the contents of dissolved organic carbon (DOC), aluminum, and manganese. Multivariate stepwise regression analysis indicated that the dissolution of CuO NPs could be well predicted by pH and DOC contents of the soil solutions. In the GD soil solution (acidic), 4- and 8-fold of the DOC content amendments significantly promoted the dissolution of the three sizes of CuOs, resulting in an increase of Cu²⁺ 4.55-11.3 and 5.67-16.2 times, respectively. In the CQ soil solution (neutral), 8-fold DOC amendments increase the release of Cu²⁺ 2.13-16.6 times. While in the SD soil solution (alkaline), promoting effect on the dissolution was only observed for nano-CuOs, with Cu²⁺ elevated by factors of 1.56-4.64 and 1.38-4.48. The amendments of Al³⁺ and Mn²⁺ in soil solution increased the amounts of Cu²⁺ 1.13-4.80 and 1.02-1.46 times in the GD soil solution. In comparison, no significant promoting effects were observed in CQ and SD soil solutions due to their stronger buffering capacities. These findings offer insight into the dissolution behavior of nano-CuOs in soils and be helpful to evaluate their environmental risks.

Transport of surface-modified multi-walled carbon nanotubes in saturated porous media

Carbon nanotubes (CNTs) are widely used and may pose potential environmental risks to soil and groundwater systems. Therefore, it is important to improve current understanding of the fate and transport of CNTs in porous media. In this study, the transport behavior of multi-walled carbon nanotubes (MWCNTs) with different surface modifications were examined in water-saturated sand columns under different pH (5 and 7) and ionic strength (0.1, 1, and 5 mM) conditions. COOH-MWCNTs have the strongest mobility among the five types of MWCNTs, followed by pristine MWCNTs. NH₂-MWCNTs, Cu-MWCNTs, and Fe-MWCNTs have the weaker mobility. The transport of five types of MWCNTs decreased with the increase of ionic strength, while increased with the increase of pH value. The results suggested that the transport of MWCNTs can be affected by the electrostatic attraction between the functional groups on the surface of MWCNTs and quartz sand. Moreover, the pH and ionic strength of the solution also played an important role in enhancing the transport of MWCNTs, which have great significance for evaluating the transport and fate of MWCNTs in natural environment.

Biogenic Selenium Nanoparticles: A Fine Characterization to Unveil Their Thermodynamic Stability

Among the plethora of available metal(loid) nanomaterials (NMs), those containing selenium are interesting from an applicative perspective, due to their high biocompatibility. Microorganisms capable of coping with toxic Se-oxyanions generate mostly Se nanoparticles (SeNPs), representing an ideal and green alternative over the chemogenic synthesis to obtain thermodynamically stable NMs. However, their structural characterization, in terms of biomolecules and interactions stabilizing the biogenic colloidal solution, is still a black hole that impairs the exploitation of biogenic SeNP full potential. Here, spherical and thermodynamically stable SeNPs were produced by a metal(loid) tolerant Micrococcus sp. Structural characterization obtained by Scanning Electron Microscopy (SEM) revealed that these SeNPs were surrounded by an organic material that contributed the most to their electrosteric stabilization, as indicated by Zeta (ζ) potential measurements. Proteins were strongly adsorbed on the SeNP surface, while lipids, polysaccharides, and nucleic acids more loosely interacted with SeNMs as highlighted by Fourier Transform Infrared Spectroscopy (FTIR) and overall supported by multivariate statistical analysis. Nevertheless, all these contributors were fundamental to maintain SeNPs stable, as, upon washing, the NM-containing extract showed the arising of aggregated SeNPs alongside Se nanorods (SeNRs). Besides, Density Functional Theory (DFT) calculation unveiled how thiol-containing molecules appeared to play a role in SeO₃²⁻ bioreduction, stress oxidative response, and SeNP stabilization.

Ecotoxicological effect of TiO2 nano particles on different soil enzymes and microbial community

TiO₂ nano particles (NPs) are one of the most produced nanoparticles in the world which are increasingly being released in to the soil. Soils are exposed to various level of concentration of TiO₂ NPs, which has raised concern over the adverse influence on soil microbial community, in turn on ecosystem functions. Although, increasing number of studies on ecotoxicological effect of TiO₂ NPs are coming up recently, however, a common conscience has yet to be reached regarding the impact of TiO₂ NPs on soil microbial community and processes. Moreover, very few studies have targeted soil enzymes which are being considered as sensitive indicator of soil health. Therefore, the present study has been carried out to estimate the ecotoxicological effect of various doses of TiO₂ NPs (5, 10, 20, 40, 80, 100 mg kg^-1 soil) on different soil enzymes and microbial community structure. Results revealed that soil enzyme activities and microbial biomass had a uniform trend where the value increased up to the dose of 20 mg TiO₂ NPs kg^-1 soil and there onwards reduced drastically up to 100 mg TiO₂ NPs kg^-1 soil dose. On the contrary, soil respiration and metabolic quotient kept increasing up to 100 mg TiO₂ NPs kg^-1 soil dose indicating sub-lethal stress on microbial community. Nevertheless, the structure of microbial community had slightly different trend where the biomass of total phospho lipid fatty acid (PLFA), Gram positive, Gram negative bacteria, fungi, actinomyctetes and anaerobes were found to be increased up to dose of 80 mg TiO₂ NPs kg^-1 soil, but, significantly declined at 100 mg TiO₂ NPs kg^-1 soil dose. Furthermore, temperature effect on TiO₂ NPs toxicity had exhibited a less negative impact at 40 °C rather than at 25 °C. In addition alteration index (AI3), an integrated indicator of C, N, P cycling of soils as well as a well-documented indicator of soil pollution, has been found to be regulated by soil respiration, clay content, anaerobe and eukaryote for AI3-Acid Phos. and by fungi to bacteria ratio, soil respiration, microbial biomass and Gram positive bacteria for AI3-Alk. Phos. Overall, the study provided valuable information regarding ecotoxicological impact of environmentally relevant concentrations of TiO₂ NPs in clay loam soils as well as improved our perception regarding the impact of NPs on soil functioning.

Molecular Impacts of Dietary Exposure to Nanoplastics Combined or Not with Arsenic in the Caribbean Mangrove Oysters (Isognomon alatus)

Nanoplastics (NPs) are anthropogenic contaminants that raise concern, as they cross biological barriers. Metals' adsorption on NPs' surface also carries ecotoxicological risks to aquatic organisms. This study focuses on the impacts of three distinct NPs on the Caribbean oyster Isognomon alatus through dietary exposure. As such, marine microalgae Tisochrysis lutea were exposed to environmentally weathered mixed NPs from Guadeloupe (NPG), crushed pristine polystyrene nanoparticles (PSC), and carboxylated polystyrene nanoparticles of latex (PSL). Oysters were fed with NP-T. lutea at 10 and 100 µg L-1, concentrations considered environmentally relevant, combined or not with 1 mg L-1 pentoxide arsenic (As) in water. We investigated key gene expression in I. alatus' gills and visceral mass. NP treatments revealed significant induction of cat and sod1 in gills and gapdh and sod1 in visceral mass. As treatment significantly induced sod1 expression in gills, but once combined with any of the NPs at both concentrations, basal mRNA levels were observed. Similarly, PSL treatment at 100 µg L-1 that significantly induced cat expression in gills or sod1 in visceral mass showed repressed mRNA levels when combined with As (reduction of 2222% and 34%, respectively, compared to the control). This study suggested a protective effect of the interaction between NPs and As, possibly by decreasing both contaminants' surface reactivity.

Are Smaller Nanoparticles Always Better? Understanding the Biological Effect of Size-Dependent Silver Nanoparticle Aggregation Under Biorelevant Conditions

Purpose

Silver nanoparticles (AgNPs) are one of the most commonly investigated nanomaterials, especially due to their biomedical applications. However, their excellent cytotoxic and antimicrobial activity is often compromised in biological media due to nanoparticle aggregation. In this work, the aggregation behavior and the related biological activity of three different samples of citrate capped silver nanoparticles, with mean diameters of 10, 20, and 50 nm, respectively, were examined.

Methods

Following nanoparticle synthesis and characterization with transmission electron microscopy, their aggregation behavior under various pH values, NaCl, glucose, and glutamine concentrations, furthermore in cell culture medium components such as Dulbecco’s Modified Eagle’s Medium and fetal bovine serum, was assessed through dynamic light scattering and ultraviolet-visible spectroscopy.

Results

The results indicated that acidic pH and physiological electrolyte content universally induce micron-scale aggregation, which can be mediated by biomolecular corona formation. Remarkably, larger particles demonstrated higher resistance against external influences than smaller counterparts. In vitro cytotoxicity and antimicrobial assays were performed by treating cells with nanoparticulate aggregates in differing stages of aggregation.

Conclusion

Our results revealed a profound association between colloidal stability and toxicity of AgNPs, as extreme aggregation led to the complete loss of biological activity. The higher degree of aggregation resistance observed for larger particles had a significant impact on the in vitro toxicity, since such samples retained more of their activity against microbes and mammalian cells. These findings lead to the conclusion that aiming for the smallest possible nanoparticles might not be the best course of action, despite the general standpoint of the relevant literature.

The mechanisms of gravity-constrained aggregation in natural colloidal suspensions

Colloidal settlement in natural aqueous suspensions is effectively compensated by diffusive movement if particles resist aggregation - a state known as colloidal stability. However, if the settling velocity increases upon aggregation, complex structural features emerge from the directional movement induced by gravity. We present a comprehensive modeling study on the evolution of an aggregated three-dimensional structure due to diffusion, surface interactions, and gravity. The systematic investigation of particle geometry and size revealed three mechanisms: (I) aggregation due to spatial confinement of settled particles, (II) aggregation due to differential settling, whereby fast and slow particles collide, (III) inhibition of aggregation due to fractionation of particles with different settling velocity. A 3D visualization tool allowed us to follow the subtle interplay of these mechanisms and the highly dynamic hierarchical self-assembly of aggregates. It revealed how the balance of the different interactions determines the actual rate of aggregation.

Surfactant-free tantalum oxide nanoparticles: synthesis, colloidal properties, and application as a contrast agent for computed tomography

With the growing interest of the medical industry in biocompatible nanoparticles (NPs), the current synthetic methods should be adapted to appropriate demands (toxicity, scalability, etc.). Most applications require colloidal systems to be stable not only in water but also in vivo, which represents a major challenge. In this study, biocompatible Ta2O5 NPs were synthesized by a solvothermal method avoiding toxic reagents, and surfactant-free stable hydrosols were obtained and used for computed tomography (CT) imaging. The small hydrodynamic size (2 nm) and colloidal stability of primary NPs were studied by dynamic light scattering (DLS). The particles were characterized by X-ray diffraction, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and Brunauer-Emmett-Teller analysis to confirm their structure and purity. To develop a stable hydrosol preparation protocol, the influence of pH and ultrasonication duration on the stability of Ta2O5 sols was analyzed by DLS and microelectrophoresis. To enhance the understanding of NP behavior in vivo, sol stability in conditions close to physiological (NaCl solutions) was studied in a pH range of 3-9. Hydrosols prepared by the proposed protocol were stable for at least 6 months and exhibited negligible cytotoxicity. Ta2O5 NPs also showed high CT contrast both in theoretical calculations and in vivo (rat gastrointestinal tract).

Resistance of multidrug resistant Escherichia coli to environmental nanoscale TiO2 and ZnO

Excessive production and utilization of nanoparticles (NPs) at industrial and household levels releases substantial quantities of NPs into the environment. These can be harmful to different types of organisms and cause adverse effects on ecosystems. Purchased TiO₂ and ZnO NPs were characterized via XRD, XPS, FESEM, and Zeta potential. This study elucidates how multidrug resistant Escherichia coli LM13, which was recovered from livestock manure, counteracts the antibacterial activities of TiO₂ and ZnO NPs to survive in the environment. E. coli ATCC25922, which is susceptible to antibiotics, was used as control. A dose-response experiment showed that the antibacterial activity of TiO₂ was lower than that of ZnO NPs and, LM13 was more resistant to NPs than ATCC25922. An AcrAB-TolC efflux pump along with its regulation genes helped LM13 to minimize NP toxicity. Flow cytometry findings also indicated that the intensity of the side-scatter light parameter increased with TiO₂ and ZnO NPs in a dose dependent manner, suggesting NP uptake by the both strains. The generation of reactive oxygen species in LM13 was several-fold lower than in ATCC25922, suggesting that reactive oxygen species mainly contribute to the toxicity mechanism. These results illustrate the necessity to evaluate the impacts of NPs on the survival capacity of bacteria and on the resistance genes in bacteria with higher NP resistance than NP susceptible bacteria.

Environmental Fate Modeling of Nanoplastics in a Salinity Gradient Using a Lab-on-a-Chip: Where Does the Nanoscale Fraction of Plastic Debris Accumulate?

The aim of this study is to demonstrate how the flow and diffusion of nanoplastics through a salinity gradient (SG), as observed in mangrove swamps (MSPs), influence their aggregation pathways. These two parameters have never yet been used to evaluate the fate and behavior of colloids in the environment, since they cannot be incorporated into classical experimental setups. Land-sea continuums, such as estuaries and MSP systems, are known to be environmentally reactive interfaces that influence the colloidal distribution of pollutants. Using a microfluidic approach to reproduce the SG and its dynamics, the results show that nanoplastics arriving in a MSP are fractionated. First, a substantial fraction rapidly aggregates to reach the microscale, principally governed by an orthokinetic aggregation process and diffusiophoresis drift. These large nanoplastic aggregates eventually float near the water's surface or settle into the sediment at the bottom of the MSP, depending on their density. The second, smaller fraction remains stable and is transported toward the saline environment. This distribution results from the combined action of the spatial salt concentration gradient and orthokinetic aggregation, which is largely underestimated in the literature. Due to nanoplastics' reactive behavior, the present work demonstrates that mangrove and estuarine systems need to be better examined regarding plastic pollution.

Effects of F-, Cl-, Br-, NO3-, and SO42- on the colloidal stability of Fe3O4 nanoparticles in the aqueous phase

The effect of ions on the colloidal behavior of magnetic nanoparticles (MNPs) is an important factor for determining the dispersibility of MNPs. Compared with the effects of cations and organic matter, the effect of anions on MNPs has rarely been studied. Hence, in this study, the effect of anions on the aggregation of Fe₃O₄ MNPs in the aqueous phase was investigated using F^-, Cl^-, Br^-, NO₃^-, and SO₄^2-. The results indicated that the effect of anions on the colloidal behavior of the MNPs varied widely depending on their valence state, concentration, hydration ability, solution pH, and the magnetic force between the MNPs. Specifically, at pH 5.0, the anions were mainly adsorbed on the particle surface by electrostatic attraction, decreasing the electrostatic repulsion between the MNPs and causing an aggregation of the particles in the order of SO₄^2- > F^- > Br^- > Cl^- ≈ NO₃^-. At pH 9.0, anions strengthened the suspension of the MNPs at low ionic strength (IS) (≤5); however, with increasing IS, an aggregation of the MNPs in the following order was formed: NO₃^- > Cl^- > Br^- ≥ F^- > SO₄^2-. This was a result of the combined effects of the IS of solution, hydrability, and polarizability of the anions. Furthermore, the Derjaguin-Landau-Vervey-Overbeek (DLVO) theory can explain the colloidal behavior of MNPs in the presence of magnetic forces, but it fails to differentiate the MNP behaviors between monovalent anions because the effects of ionic hydrability and polarizability are not considered. Distinctively, the secondary minimum between the MNPs particles were induced via magnetic attraction and played a critical role in adjusting the colloidal stability of the MNPs. Overall, these results indicate that specific ionic effects and magnetic attraction are important for interpreting the colloidal stability of MNPs in aqueous conditions.

Fast and Accurate Nanoparticle Characterization Using Deep-Learning-Enhanced Off-Axis Holography

Characterization of suspended nanoparticles in their native environment plays a central role in a wide range of fields, from medical diagnostics and nanoparticle-enhanced drug delivery to nanosafety and environmental nanopollution assessment. Standard optical approaches for nanoparticle sizing assess the size via the diffusion constant and, as a consequence, require long trajectories and that the medium has a known and uniform viscosity. However, in most biological applications, only short trajectories are available, while simultaneously, the medium viscosity is unknown and tends to display spatiotemporal variations. In this work, we demonstrate a label-free method to quantify not only size but also refractive index of individual subwavelength particles using 2 orders of magnitude shorter trajectories than required by standard methods and without prior knowledge about the physicochemical properties of the medium. We achieved this by developing a weighted average convolutional neural network to analyze holographic images of single particles, which was successfully applied to distinguish and quantify both size and refractive index of subwavelength silica and polystyrene particles without prior knowledge of solute viscosity or refractive index. We further demonstrate how these features make it possible to temporally resolve aggregation dynamics of 31 nm polystyrene nanoparticles, revealing previously unobserved time-resolved dynamics of the monomer number and fractal dimension of individual subwavelength aggregates.

Colloid Interaction Energies for Surfaces with Steric Effects and Incompressible and/or Compressible Roughness

Colloid aggregation and retention in the presence of macromolecular coatings (e.g., adsorbed polymers, surfactants, proteins, biological exudates, and humic materials) have previously been correlated with electric double layer interactions or repulsive steric interactions, but the underlying causes are not fully resolved. An interaction energy model that accounts for double layer, van der Waals, Born, and steric interactions as well as nanoscale roughness and charge heterogeneity on both surfaces was extended, and theoretical calculations were conducted to address this gap in knowledge. Macromolecular coatings may produce steric interactions in the model, but non-uniform or incomplete surface coverage may also create compressible nanoscale roughness with a charge that is different from the underlying surface. Model results reveal that compressible nanoscale roughness reduces the energy barrier height and the magnitude of the primary minimum at separation distances exterior to the adsorbed organic layer. The depth of the primary minimum initially alters (e.g., increases or decreases) at separation distances smaller than the adsorbed organic coating because of a decrease in the compressible roughness height and an increase in the roughness fraction. However, further decreases in the separation distance create strong steric repulsion that dominates the interaction energy profile and limits the colloid approach distance. Consequently, adsorbed organic coatings on colloids can create shallow primary minimum interactions adjacent to organic coatings that can explain enhanced stability and limited amounts of aggregation and retention that have commonly been observed. The approach outlined in this manuscript provides an improved tool that can be used to design adsorbed organic coatings for specific colloid applications or interpret experimental observations.

Magnetic micro-macro biocatalysts applied to industrial bioprocesses

The use of magnetic biocatalysts is highly beneficial in bioprocesses technology, as it allows their easy recovering and enhances biocatalyst lifetime. Thus, it simplifies operational processing and increases efficiency, leading to more cost-effective processes. The use of small-size matrices as carriers for enzyme immobilization enables to maximize surface area and catalysts loading, also reducing diffusion limitations. As highly expensive nanoparticles (nm size) usually aggregate, their application at large scale is not recommended. In contrast, the use of magnetic micro-macro (µm-mm size) matrices leads to more homogeneous biocatalysts with null or very low aggregation, which facilitates an easy handling and recovery. The present review aims to highlight recent trends in the application of medium-to-high size magnetic biocatalysts in different areas (biodiesel production, food and pharma industries, protein purification or removal of environmental contaminants). The advantages and disadvantages of these above-mentioned magnetic biocatalysts in bioprocess technology will be also discussed.

Incidence of metal-based nanoparticles in the conventional wastewater treatment process

Metal-based nanoparticles (NPs) can be found in wastewater streams, which are significant pathways for the release of NPs to the environment. Determination of the NPs concentration in wastewater streams is important for performing appropriate ecotoxicological evaluations. The aim of this work was to determine the incidence of NPs from 13 different elements throughout the wastewater treatment process by using single particle inductively coupled plasma mass spectrometry (spICP-MS). The incidence was determined in samples of the influent, post-primary treatment and effluent of the activated sludge process, as well as in the reclaimed water of a full-scale wastewater treatment plant (WWTP). In addition, concentration of NPs was determined in the waste activated sludge and in the anaerobic digester. The concentration of metal-based NPs in the influent wastewater were between 1,600 and 10,700 ng/L for elements such as Ti, Fe, Ce, Mg, Zn and Cu, while that for Ni, Al, Ag, Au, Co and Cd was below 100 ng/L. Concentrations in reclaimed water ranged between 0.6 and 721 ng/L, ranked as Mg > Ti > Fe > Cu > Ni > Ce > Zn > Mn > Al  > Co > Ag > Cd  > Au. Results indicated that the activated sludge process and reclaimed water system removed 84-99% of natural and engineered metal-based NPs from influent to reclaimed water, except for Mg, Ni and Cd where the removal ranged from 70 to 78%. The highest concentrations of NPs were found in the waste activated sludge and anaerobic sludge, ranging from 0.5 to 39,900 ng/L. The size distribution of NPs differed in different wastewater streams within the WWTP, resulting in smaller particles in the effluent (20-180 nm) than in the influent (23-233 nm) for most elements. Conversely, NPs were notably larger in the waste activated sludge samples than in the anaerobic sludge or wastewater, since conditions in the secondary treatment lead to precipitation of several metal-based NPs. The incidence of metal-based NPs from 13 elements in wastewater decreased significatively after the conventional wastewater treatment train. However, anaerobic digesters store high NPs concentrations. Hence, the disposal of sludge needs to take this into account to evaluate the risk of the release of NPs to the environment.

Antibacterial coating of tooth surface with ion-releasing pre-reacted glass-ionomer (S-PRG) nanofillers

OBJECTIVES

Surface pre-reacted glass-ionomer (S-PRG) fillers release antibacterial borate and fluoride ions. We fabricated nanoscale S-PRG fillers (S-PRG nanofillers) for antibacterial coating of tooth surfaces and assessed the antibacterial effects of this coating in vitro. In addition, we creating a canine model of periodontitis to evaluate the effectiveness of S-PRG nanofiller application on tooth roots and improvement of periodontal parameters.

METHODS

Human dentin blocks were coated with S-PRG nanofiller (average particle size: 0.48 μm) and then characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometer (EDX), and ion-releasing test. Antibacterial effects of dentin blocks coated with S-PRG nanofiller were examined using bacterial strains, Streptococcus mutans and Actinomyces naeslundii. Next, we created an experimental model of periodontitis in furcation of premolars of beagle dogs. Then, S-PRG nanofiller coating was applied onto exposed tooth root surfaces. Periodontal parameters, gingival index (GI), bleeding on probing (BOP), probing pocket depth (PPD), and clinical attachment level (CAL), were measured from baseline until 4 weeks. In addition, bone healing was radiographically and histologically examined.

RESULTS

SEM and EDX revealed that S-PRG nanofillers uniformly covered the dentin surface after coating. Dentin blocks coated with S-PRG nanofiller showed ion-releasing property, bacterial growth inhibition, and sterilization effects. In the experimental periodontitis model, S-PRG nanofiller coating significantly reduced clinical inflammatory parameters, such as GI (P < 0.01) and BOP (P < 0.05), compared to uncoated samples. In addition, PPD and CAL significantly decreased by S-PRG nanofiller coating (2 weeks: P < 0.05; 3 and 4 weeks: P < 0.01), suggesting the improvement of periodontitis. Micro-CT and histology revealed that bone healing of furcation defects was enhanced by S-PRG nanofiller coating.

CONCLUSION

S-PRG nanofiller coating provides antibacterial effects to tooth surfaces and improves clinical parameters of periodontitis.

Biostimulation and toxicity: The magnitude of the impact of nanomaterials in microorganisms and plants

Background

Biostimulation and toxicity constitute the continuous response spectrum of a biological organism against physicochemical or biological factors. Among the environmental agents capable of inducing biostimulation or toxicity are nanomaterials. On the < 100 nm scale, nanomaterials impose both physical effects resulting from the core’s and corona’s surface properties, and chemical effects related to the core’s composition and the corona’s functional groups.

Aim of Review

The purpose of this review is to describe the impact of nanomaterials on microorganisms and plants, considering two of the most studied physical and chemical properties: size and concentration.

Key Scientific Concepts of Review

Using a graphical analysis, the presence of a continuous biostimulation-toxicity spectrum is shown considering different biological responses. In microorganisms, the results showed high susceptibility to nanomaterials. Simultaneously, in plants, a hormetic response was found related to nanomaterials concentration and, in a few cases, a positive response in the smaller nanomaterials when these were applied at a higher level. With the above, it is concluded that: (1) microorganisms are more susceptible to nanomaterials than plants, (2) practically all nanomaterials seem to induce responses from biostimulation to toxicity in plants, and (3) the kind of response observed will depend in a complex way on the nanomateriaĺs physical and chemical characteristics, of the biological species with which they interact, and of the form and route of application and on the nature of the medium -soil, soil pore water, and biological surfaces- where the interaction occurs.

Integrating biometallurgical recovery of metals with biogenic synthesis of nanoparticles

Industrial activities, such as mining, electroplating, cement production, and metallurgical operations, as well as manufacturing of plastics, fertilizers, pesticides, batteries, dyes or anticorrosive agents, can cause metal contamination in the surrounding environment. This is an acute problem due to the non-biodegradable nature of metal pollutants, their transformation into toxic and carcinogenic compounds, and bioaccumulation through the food chain. At the same time, platinum group metals and rare earth elements are of strong economic interest and their recovery is incentivized. Microbial interaction with metals or metals-bearing minerals can facilitate metals recovery in the form of nanoparticles. Metal nanoparticles are gaining increasing attention due to their unique characteristics and application as antimicrobial and antibiofilm agents, biocatalysts, in targeted drug delivery, for wastewater treatment, and in water electrolysis. Ideally, metal nanoparticles should be homogenous in shape and size, and not toxic to humans or the environment. Microbial synthesis of nanoparticles represents a safe, and environmentally friendly alternative to chemical and physical methods. In this review article, we mainly focus on metal and metal salts nanoparticles synthesized by various microorganisms, such as bacteria, fungi, microalgae, and yeasts, as well as their advantages in biomedical, health, and environmental applications.