Zeolite-supported nanoscale zero-valent iron: New findings on simultaneous adsorption of Cd(II), Pb(II), and As(III) in aqueous solution and soil

Zeolite-supported nanoscale zero-valent iron for immobilization of cadmium, lead, and arsenic in farmland soils: Encapsulation mechanisms and indigenous microbial responses

Zeolite-supported nanoscale zero-valent iron (Z-NZVI) has great potential for metal(loid) removal, but its encapsulation mechanisms and ecological risks in real soil systems are not completely clear. We conducted long-term incubation experiments to gain new insights into the interactions between metal(loid)s (Cd, Pb, As) and Z-NZVI in naturally contaminated farmland soils, as well as the alteration of indigenous bacterial communities during soil remediation. With the pH-adjusting and adsorption capacities, 30 g kg^-1 Z-NZVI amendment significantly decreased the available metal(loid) concentrations by 10.2-96.8% and transformed them into strongly-bound fractions in acidic and alkaline soils after 180 d. An innovative magnetic separation of Z-NZVI from soils followed by XRD and XPS characterizations revealed that B-type ternary complexation, heterogeneous coprecipitation, and/or concurrent redox reactions of metal(loid)s, especially the formation of Cd₃(AsO₄)₂, PbFe₂(AsO₄)₂(OH)₂, and As⁰, occurred only under specific soil conditions. Sequencing of 16S rDNA using Illumina MiSeq platform indicated that temporary shifts in iron-resistant/sensitive, pH-sensitive, denitrifying, and metal-resistant bacteria after Z-NZVI addition were ultimately eliminated because soil characteristics drove the re-establishment of indigenous bacterial community. Meanwhile, Z-NZVI recovered the basic activities of bacterial DNA replication and denitrification functions in soils. These results confirm that Z-NZVI is promising for the long-term remediation of metal(loid)s contaminated farmland soil without significant ecotoxicity.

Evolution of heavy metals during thermal treatment of manure: A critical review and outlooks

Manure treatment has become a focal issue in relation to current national policies on environmental and renewable energy matters. Heavy metals can be excreted with the animal manure, contributing to pollution of soil and water. Therefore, animal manure needs proper treatment before application to agricultural soils. Here, we review the species transformation of HMs and fate during incineration, pyrolysis, gasification and hydrothermal processing of animal manures. During thermal processes, 75%-90% of thermally stable HMs such as Cr, Ni, and Mn were concentrated in the solid-phase. HMs with less thermal stability such as Cd, As, Hg, and Pb are inclined to concentrate in the aqueous phase and gas phase, accounting for less than 5% of their total concentrations. In general, thermal processes transform HMs in the exchangeable fraction with high biotoxicity to oxidizable fraction or residual fraction with less bioavailability. In addition, the operating conditions and co-processing with other materials may influence the species transformation of HMs. Finally, recommendations for future research on the proper disposal and utilization of animal manure are proposed. More large-scale experiments are required to elucidate the precise mechanism behind the immobilization of HMs. The influence of additives (catalysts and HM stabilizers) and the influence of the type of solvent on HM transformation needs further study.

A novel calcium-based magnetic biochar is effective in stabilization of arsenic and cadmium co-contamination in aerobic soils

This study developed a novel calcium-based magnetic biochar by pyrolysing rice straw mixed with calcium carbonate and iron oxide for stabilization of contamination of multiple metals. A 160-day incubation study was conducted to investigate its performance in stabilization of cadmium and arsenic co-contamination in soil. Both biochar and Ca-MBC treatments increased soil pH, decreased the bioavailability of cadmium. Ca-MBC decreased but biochar enhanced the bioavailability of arsenic. The BCR (European Community Bureau of Reference) sequential extraction confirmed Ca-MBC facilitated the transformation of the unstable fraction of arsenic to stable fractions. The stabilization mechanisms were explored through synchrotron-based micro X-ray fluorescence and X-ray absorption near edge structure. The results show that Ca-MBC remediated the dual contamination of arsenic and cadmium through (1) elevated pH and cation exchange capacity (for Cd); (2) the formation of bi-dentate chelate and ternary surface complexes on the surface of iron oxide; (3) enhanced adsorption ability of porous biochar. In addition, Ca-MBC increased the abundance and diversity of bacterial community, and modified the relative abundances of bacterial taxa, leading to a shift of the composition. These new insights provide valuable information for stabilization of co-contamination of arsenic and cadmium in soil using the potential material Ca-MBC.

From classic methodologies to application of nanomaterials for soil remediation: an integrated view of methods for decontamination of toxic metal(oid)s

Soil pollution with toxic elements is a recurrent issue due to environmental disasters, fossil fuel burning, urbanization, and industrialization, which have contributed to soil contamination over the years. Therefore, the remediation of toxic metals in soil is always an important topic since contaminated soil can affect the environment, agricultural safety, and human health. Many remediation methods have been developed; however, it is essential to ensure that they are safe, and also take into account the limitation of each methodology (including high energy input and generation of residues). This scenario has motivated this review, where we explore soil contamination with arsenic, lead, mercury, and chromium and summarize information about the methods employed to remediate each of these toxic elements such as phytoremediation, soil washing, electrokinetic remediation, and nanoparticles besides elucidating some mechanisms involved in the remediation. Considering all the discussed techniques, nowadays, different techniques can be combined together in order to improve the efficiency of remediation besides the new approach of the techniques and the use of one technique for remediating more than one contaminant.

Efficient removal of acid orange 7 using a porous adsorbent-supported zero-valent iron as a synergistic catalyst in advanced oxidation process

This study focuses on the synthesis of granular red mud reinforced by zero-valent iron (Fe@GRM) and its application for the removal acid orange 7 (AO7) from aqueous solution. Then ZVI is employed as a catalyst for the activation of persulfate (PS) to produce sulfate radicals (SO₄^•-) that are produced at 900 °C in an anoxic atmosphere using the direct reduction of iron oxide in the red mud with maize straw as the reductant. Furthermore, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) are used to illustrate the morphology and porous structure of the Fe@GRM. The X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) revealed that Fe@GRM was loaded with zero-valent iron. This characterization confirmed that the Fe@GRM was a porous structure material that contained zero-valent iron. The influence of conditions for AO7 elimination, including initial pH, Fe@GRM dosage, initial AO7 concentrations, and temperature, is also investigated. The removal efficiency of AO7 was 90.78% using Fe@GRM/PS, while only 18.15% was removed when Fe@GRM was used alone. The degradation kinetics were well fitted to a pseudo-first-order kinetic model, and the rate of removal increased with temperature, demonstrating an endothermic elimination process. The Arrhenius activation energy of the process was 20.77 kJ/mol, which indicated that the reduction of AO7 was a diffusion-mediated reaction. Fe@GRM is a low-cost material that demonstrated outstanding performance with great potential for wastewater treatment.

Effective removal of two fluoroquinolone antibiotics by PEG-4000 stabilized nanoscale zero-valent iron supported onto zeolite (PZ-NZVI)

In this work, nanoscale zero-valent iron (NZVI) was synthesized via liquid phase reduction method with surfactant polyethylene glycol (PEG-4000) modified and supported onto zeolite to prepare PZ-NZVI composite. SEM-EDS, XPS, BET.etc. characterizations indicated that the sphere NZVI particles were loaded on the zeolite successfully and the aggregation was restrained. The adsorption performance of PZ-NZVI for norfloxacin (NOR) or ofloxacin (OFL), two typical fluoroquinolones (FQs), from water was conducted. The equilibrium studies were demonstrated using Langmuir, Freundlich, Temkin and Elovich isotherms and better agreement was attained with the Temkin model. Compared with NZVI and zeolite, PZ-NZVI had higher FQs removal efficiency, and the Langmuir maximum adsorption capacity was 54.67 mg g^-1 (NOR) and 48.88 mg g^-1 (OFL). The kinetic parameters displayed that two FQs adsorption onto PZ-NZVI followed pseudo-second-order kinetic model. The thermodynamic analysis suggested the adsorption process was spontaneous and exothermic. In addition, the adsorption tests were executed at different influence factors and the adsorbent PZ-NZVI was suitable for a wide pH range (4-10) with the FQs (10 mg L^-1) removal efficiency above 90% in 1 h. Furthermore, it was found that PZ-NZVI can be effortlessly separated from mixed solutions using external magnetic field. Finally, the process of FQs adsorbed onto PZ-NZVI was attributed to the surface complexion (forming bidentate complexes), hydrophobic interaction, pore filling and electrostatic interaction.

Highly Efficient Removal of Methylene Blue Dye from an Aqueous Solution Using Cellulose Acetate Nanofibrous Membranes Modified by Polydopamine

A new type of deacetylated cellulose acetate (DA)@polydopamine (PDA) composite nanofiber membrane was fabricated by electrospinning and surface modification. The membrane was applied as a highly efficient adsorbent for removing methylene blue (MB) from an aqueous solution. The morphology, surface chemistry, surface wettability, and effects of operating conditions on MB adsorption ability, as well as the equilibrium, kinetics, thermodynamics, and mechanism of adsorption, were systematically studied. The results demonstrated that a uniform PDA coating layer was successfully developed on the surface of DA nanofibers. The adsorption capacity of the DA@PDA nanofiber membrane reached up to 88.2 mg/g at a temperature of 25 °C and a pH of 6.5 after adsorption for 30 h, which is about 8.6 times higher than that of DA nanofibers. The experimental results showed that the adsorption behavior of DA@PDA composite nanofibers followed the Weber's intraparticle diffusion model, pseudo-second-order model, and Langmuir isothermal model. A thermodynamic analysis indicated that endothermic, spontaneous, and physisorption processes occurred. Based on the experimental results, the adsorption mechanism of DA@PDA composite nanofibers was also demonstrated.

Zero-valent iron-manganese bimetallic nanocomposites catalyze hypochlorite for enhanced thallium(I) oxidation and removal from wastewater: Materials characterization, process optimization and removal mechanisms

Nano zero-valent metals adsorption coupled with advanced oxidation for environmental pollutants removal has been gaining attention recently. In this study, zero-valent iron-manganese (nZVIM) bimetallic nanocomposites were prepared via one-pot borohydride reduction and coupled with hypochlorite (ClO^-) oxidation for enhanced thallium (Tl) removal from wastewater. Amorphous nZVIM nanoparticles were successfully synthesized, with a specific surface area of 106.89 m²/g, and a saturation magnetization of 65.16 emu/g. In comparison with the nZVIM adsorption or ClO^- oxidation alone, the hybrid nZVIM/ClO^- process achieved much faster Tl(I) removal rate over a wide pH range from 6 to 10. Maximum Tl(I) removal capacity was as high as 990.0 mg/g. The oxidation-induced adsorption for Tl(I) removal well followed the pseudo-first kinetic order model. Stable and effective adsorbent regeneration was achieved during the cyclic adsorption-desorption tests. This process also had high resistance to the interference of external cations, can act as an effective pretreatment for Tl(I) removal from the actual saline industrial wastewater. The main mechanisms for Tl(I) removal were found to be oxidation, surface precipitation, pore retention, and surface complexation. The nZVIM coupled with ClO^- approach has great potential for Tl(I) removal from wastewater, and its application in other fields is highly anticipated.

Simultaneous adsorption of Cd(II)andAs(III)by a novel biochar-supported nanoscale zero-valent iron in aqueous systems

Biochar-supported nanoscale zero-valent iron (nZVI-BC) is a promising material for Cd(II) and As(III) removal from aqueous systems. In this study, simplified nZVI-BC composites were successfully synthesized and characterized via scanning electron microscopy (SEM), X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectrometry (XPS), and Fourier transform infrared spectroscopy (FTIR) to understand the underlying adsorption mechanism. SEM and FTIR confirmed that nZVI particles were distributed evenly on the biochar surface. XRD and XPS revealed that metal ions were separated from solutions via electrostatic adsorption, complexation, oxidation, precipitation/co-precipitation, and the formation of type B ternary surface complex. Batch experiments showed that nZVI-BC (1:1) had a high removal efficiency in a wide pH range of 5.0-8.0 for Cd(II) and 3.0-8.0 for As(III), the maximum Cd(II) and As(III) adsorption capacities were 33.81 and 148.5 mg/g within 2 and 1 h, respectively. Additionally, synergisticeffects considerably enhanced the adsorption capacity of nZVI-BC(1:1) in mixed adsorption systems, the adsorption capacities of Cd(II) and As(III) reached 179.9 and 158.5 mg/g, respectively. Hence, nZVI-BC(1:1) is an ideal candidate for Cd(II) and As(III) pollution treatment.

Amino-functionalized graphene oxide for Cr(VI), Cu(II), Pb(II) and Cd(II) removal from industrial wastewater

Amino-functionalized graphene oxide (GO-NH2) was synthesized by grafting (3-aminopropyl) triethoxysilane on the graphene oxide (GO) surface. The GO-NH2 with high surface area and numerous active sites can efficiently adsorb Cr(VI), Cu(II), Pb(II) and Cd(II) ions. The maximum adsorption capacities of GO-NH2 for Cr(VI), Cu(II), Pb(II) and Cd(II) were 280.11, 26.25, 71.89 and 10.04 mg g−1, respectively. The pseudo-first-order and pseudo-second-order kinetic models were employed to describe the kinetic processes. The experimental data agreed well with the pseudo-second-order kinetic equation, and the adsorption of heavy metals onto GO-NH2 occurs via chemical adsorption. The characteristics of Cr(VI), Cu(II), Pb(II) and Cd(II) in the GO-NH2 adsorption processes were analyzed using the Langmuir and Freundlich isotherm models. The adsorption processes of Pb(II) and Cd(II) on GO-NH2 were fit by the Langmuir model. The Freundlich isotherm model was well correlated to Cr(VI) and Cu(II). The GO-NH2 is a promising material for the removal of heavy metal ions from industrial wastewater. This study provides an effective pathway to process industrial wastewater, and the GO-NH2 has a good adsorption effect for the treatment of heavy metals in industrial wastewater.

Manganese-modified biochar for highly efficient sorption of cadmium

In this study, corn stalk was modified by manganese (Mn) before (MBC₁) and after (MBC₂) pyrolysis at different temperatures (400~600 °C) under anaerobic conditions for Cd sorption in both water and soil. Batch experiments in aqueous solution were conducted to evaluate the optimum sorption capability by biochar with and without manganese-modified. Both types of manganese modification can improve the sorption capacity of Cd(II) on biochar, which is superior to the corresponding pristine biochar without modification, especially, pyrolyzed at 500 °C with 5:1 modification ratio. Under the optimal preparation conditions, the sorption percentage on MBC₂ was 11.01% higher than that of MBC₁. The maximum sorption capacity of MBC₂ was 191.94 mg g^-1 calculated by isotherm model. The performance of MBC₂ was also verified in soil stabilization experiments in Cd-contaminated soil. We can conclude from the results of BCR extraction that all the application rates of MBC₂ (1%, 2%, and 3%) can reduce the mild acid-soluble fraction Cd. The reducible, oxidizable, and residual fraction Cd showed an upward trend, thus controlling the migration, transformation, and enrichment of Cd in soil. The characteristic analysis showed biochar has more irregular fold and more particle-aggregated surface after modification. The main components of these aggregated particles are manganese oxides (MnO_x) with high sorption capacity, such as the MnO_x crystal structure loaded on MBC₂ is a mixed structure of δ-MnO₂ and MnO. However, these particles may block the biochar pores, or some of the pores may collapse at high temperatures during the modification process. The specific surface area was reduced, even if the sorption effect of MBC was strongly enhanced. Meanwhile, under the action of the secondary pyrolysis of MBC₂ modification process, the MBC₂ has a higher degree of aromatization with more potential active sorption sites for Cd. The study concluded that the MBC₂ could be a promising amendment for Cd in both water and soil real field applications.

Effective stabilization of arsenic in contaminated soils with biogenic manganese oxide (BMO) materials

The role of biogenic manganese oxide (BMO) materials on the stabilization of arsenic (As) in contaminated soil was investigated. Experimental results indicated that the addition of BMO was proved to be highly effective to stabilize As in soils. Bioavailable As content was decreased from 4.56 mg kg^-1 in the control samples to 1.72-1.86 mg kg^-1 in BMO-treated soils. X-ray absorption near edge structure (XANES) results confirmed that BMO was mainly responsible for oxidizing As(III) to As(V). Sequential extraction results indicated that the transformation of As fractions was from non-specifically adsorbed fraction to poorly-crystalline hydrous oxides fraction and residual fraction, which can decrease the risk of As in contaminated soils. Moreover, BMO had a higher efficiency in stabilizing As than two types of abiotic Mn oxides. High throughput sequencing analysis indicated that the bacterial community and diversity were significantly changed after BMO treatment. The abundance of Proteobacteria phylum, including Massilia, Phenylobacterium and Sphingomonas genera significantly increased with the increasing amount of BMO. These findings suggested that BMO can be considered as a low cost, high effectiveness and environmental friendliness material for the remediation of As contaminated soils.

Enhanced passivation of lead with immobilized phosphate solubilizing bacteria beads loaded with biochar/ nanoscale zero valent iron composite

Phosphate solubilizing bacteria (PSBs) can effectively enhance the stability of lead via the formation of insoluble Pb-phosphate compounds. This research presents a bio-beads, which was implemented with the help of a self-designed porous spheres carrier, by immobilized PSBs strains Leclercia adecarboxylata (hereafter referred as L1-5). In addition, the passivation efficiency of lead via bio-beads under different conditions and its mechanism were also investigated in this study. The results indicated that phosphate solubilized by bio-beads could reach 30 mg/L in Ca₃(PO₄)₂ medium containing 1 mM Pb²⁺, and the highest removal rate of Pb²⁺ in beef peptone liquid medium could reach 93%, which is better than that of free bacteria. Furthermore, it was also concluded that the lead could be transformed into stable crystal texture, such as Pb₅(PO₄)₃Cl and Pb₅(PO₄)₃OH. Both hydrophobic and hydrophilic groups in the bio-beads could capture Pb²⁺, which indicated that electrostatic attraction and ion-exchange were also the mechanism of Pb²⁺ adsorption. All the experimental findings demonstrated that this bio-bead could be consider as an efficient way for the lead immobilization in contaminated soil in the future.

Nanoremediation of As and metals polluted soils by means of graphene oxide nanoparticles

The capacity of graphene oxide nanoparticles (nGOx) to reduce or increase As and metals availability in polluted soils was compared with that of zero valent iron nanoparticles (nZVI). The nanomaterials used in this study were characterized by X-ray techniques, CHNS-O analysis, dynamic light scattering, and microscopy procedures such as atomic force microscopy. To assess the capacity of these materials to immobilize pollutants, field samples of two soils were treated with nZVI and nGOx at a range of doses (0.2%, 1% and 5%). Availability tests were then performed. nGOx effectively immobilized Cu, Pb and Cd, but mobilized As and P (even at low doses), in the latter case irrespective of the simultaneous presence of high concentrations of metals. In turn, nZVI promoted notable immobilization results for As and Pb, a poorer result for Cd, and an increased availability for Cu. Soil pH and EC have been slightly affected by nGOx. On the whole, nGOx emerges as a promising option for mobilization/immobilization strategies for soil nanoremediation when combined with other techniques such as phytoremediation.

Spent Ganoderma lucidum substrate derived biochar as a new bio-adsorbent for Pb2+/Cd2+ removal in water

The present study firstly reports spent Ganoderma lucidum substrate derived biochars (SLBCS) for the effective removal of Pb²⁺/Cd²⁺ from water. The effects of pyrolysis temperature on the SLBCS characteristics and Pb²⁺/Cd²⁺ adsorption mechanism was studied systematically. The surface physicochemical properties of SLBCS were significantly affected by the pyrolysis temperature. The increase in pyrolysis temperature from 250 to 650 °C resulted in a drastic increase in the biochar surface area and the well development of mesoporous structure, which could provide more effective adsorption sites for Pb²⁺ and Cd²⁺ onto SLBCS. According to the Langmuir model, the obtained maximum adsorption capacity of Pb²⁺ onto SL650 reached 262.76 mg g^-1, while that of Cd²⁺ reached 75.82 mg g^-1. The adsorption capacities of SL650 for Pb²⁺ and Cd²⁺ were even higher than that of other modified biochars. The high adsorption capacity of SL650 for Pb²⁺, attributed to the precipitation supported by high temperature, benefitted the formation of carbonate minerals. Two possible mechanisms involved in Cd²⁺ sorption: carbonate precipitation and coordination with π electrons. Desorption of SL650 showed high efficiency for Pb²⁺, but slightly low efficiency for Cd²⁺. These results indicate that SL650 can be applied for removing heavy metals, especially Pb²⁺, from polluted water.

Highly effective remediation of Pb(II) and Hg(II) contaminated wastewater and soil by flower-like magnetic MoS2 nanohybrid

The efficient enrichment and remediation of heavy metals from realistic wastewater and contaminated soil containing large excess of competitive ions remains a daunting challenge by far. In the present study, flower-like molybdenum disulfide decorated with iron oxide nanoparticles (MoS₂/Fe₃O₄) is designed via a two-step hydrothermal method and mainly applied in the removal of Hg(II) and Pb(II) ions in aqueous environment. Exhaustive morphological, chemical and magnetic characterizations verify the successful formation of magnetic MoS₂/Fe₃O₄. Batch adsorption experiments show that the obtained MoS₂/Fe₃O₄ nanohybrid enables efficient capture of Hg(II) and Pb(II) ions, accompanied by ease-of-separation from solution by simply applying a magnet. In this respect, high adsorption capacities (263.6 mg g^-1 for Pb(II) and 428.9 mg g^-1 for Hg(II)) can be gained under optimized conditions (pH = 5.0; 298 K; nanohybrid dosage: 0.8 g L^-1 and the contact time: 180 min). In addition, the effects of different parameters such as initial Pb(II)/Hg(II) concentration (50-500 mg L^-1), temperature (298, 308 and 318 K) and co-existing ions (Zn(II), Cu(II), Cd(II) and Mg(II)) were systematically probed. The favorable adsorption capacity, selectivity and recyclability mainly originates from the strong Hg²⁺/Pb²⁺···S^2- bonding interactions. Practical application potential of magnetic MoS₂/Fe₃O₄ nanohybrid in realistic lead-acid battery industry wastewater and Pb(II)-contaminated soil is further explored, achieving promising results with high Pb(II) removal efficiency of 99.63% for wastewater and 57.15% for soil. Simple preparation, easy separation and high adsorption capacity would foster thus-designed sulfide-based nanohybrid a promising adsorbent for heavy metal removal from wastewater and contaminated soil.

Mechanism of phosphate removal from aqueous solutions by biochar supported nanoscale zero-valent iron

The purpose of this study was to investigate the removal mechanism of phosphate by rape straw biochar (RSBC) supported nanoscale zero-valent iron (nZVI).

Site-selective exposure of iron nanoparticles to achieve rapid interface enrichment for heavy metals

A series of Janus and core–shell nanostructured Fe@PMO are well designed with controllable site-exposure of iron nanoparticles for compared investigation the recovery behavior of heavy metals.

Ir3Pb alloy nanodendrites with high performance for ethanol electrooxidation and their enhanced durability by alloying trace Au

Porous Ir₃Pb nanodendrites exhibit excellent activity and superior CO₂ selectivity for the EOR under acidic conditions, and their durability can be enhanced dramatically by alloying trace Au.

Synthesis and characterization of novel N-methylimidazolium-functionalized KCC-1: A highly efficient anion exchanger of hexavalent chromium

A key challenge in adsorption process of toxic organic and inorganic species is the design and development of adsorbent materials bearing an abundance of accessible adsorption sites with high affinity to achieve both fast adsorption kinetics and elevated adsorption capacity for toxic contaminants. Herein, a novel anion-exchange adsorbent based on fibrous silica nanospheres KCC-1 was synthesized by a facile hydrothermal-assisted post-grafting modification of KCC-1 with 1-methyl-3- (triethoxysilylpropyl)imidazolium chloride for the first time. Silica fibers with micro-mesoporous structure display the proper combination of features to serve as a potential scaffold for decorating adsorption sites to create desired ion-exchange adsorbent. The obtained N-methylimidazolium-functionalized KCC-1 (MI-Cl-KCC-1) with fibrous nanosphere morphology showed a high surface area (∼241 m² g^-1) and high pore volume (0.81 m² g^-1). The adsorption behaviors of toxic hexavalent chromium from aqueous media by the MI-Cl-KCC-1 were systematically studied using the batch method. The adsorption rate was relatively fast, and MI-Cl-KCC-1 possesses a high capacity for the adsorption of Cr(VI). The maximum Cr(VI) adsorption was obtained at pH 3.0-4.0. Different non-linear isotherm equations were tested for choosing an appropriate adorption isotherm behavior, and the adsorption data for MI-Cl-KCC-1 were consistent with the Langmuir model with a maximum adsorption capacity of 428 ± 8 mg g^-1.

Palm Kernel Shell as an effective adsorbent for the treatment of heavy metal contaminated water

Heavy metal contamination in water causes severe adverse effects on human health. Millions of tons of kernel shell are produced as waste from oil palm plantation every year. In this study, palm oil kernel shell (PKS), an agricultural waste is utilized as effective adsorbent for the removal of heavy metals, namely; Cr6+, Pb2+, Cd2+ and Zn2+ from water. Different parameters of adsorptions; solution pH, adsorbent dosage, metal ions concentration and contact time were optimized. The PKS was found to be effective in the adsorption of heavy metal ions Cr6+, Pb2+, Cd2+ and Zn2+ from water with percentage removal of 98.92%, 99.01%, 84.23% and 83.45%, respectively. The adsorption capacities for Cr6+, Pb2+, Cd2+ and Zn2+ were found to be 49.65 mg/g, 43.12 mg/g, 49.62 mg/g and 41.72 mg/g respectively. Kinetics of adsorption process were determined for each metal ion using different kinetic models like the pseudo-first order, pseudo-second order and parabolic diffusion models. For each metal ion the pseudo-second order model fitted well with correlation coefficient, R2 = 0.999. Different isotherm models, namely Freundlich and Langmuir were applied for the determination of adsorption interaction between metal ions and PKS. Adsorption capacity was also determined for each of the metal ions. PKS was found to be very effective adsorbent for the treatment of heavy metal contaminated water and short time of two hours is required for maximum adsorption. This is a comprehensive study almost all the parameters of adsorptions were studied in detail. This is a cost effective and greener approach to utilize the agricultural waste without any chemical treatment, making it user friendly adsorbent.

Enhanced adsorption of Cd (II) from aqueous solution by a shrimp bran modified Typha orientalis biochar

The biochar which was characterized with well-developed facial structure and O-/N-containing functional groups could effectively remove Cd (II) from water. In this paper, Typha orientalis-based biochar (BCS) with well-developed N containing functional groups was modified with shrimp bran which was rich in crude protein for the first time. There are more well-developed O-/N-containing functional groups in the structure of BCS than that of pure Typha orientalis-based biochar without any modification (BC), and this conclusion was depended on their comparisons of Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), scanning electron microscopy (SEM), elemental analysis (EA), Boehm titration, Fourier transform infrared (FTIR), and other characterization techniques. Moreover, according to the experiment, the phenomenon that the adsorption capacity of Cd(II) on these two adsorbents (BCs) decreased with the increase of solution ionic strength could be carried out. The Cd(II) adsorption studies combined with X-ray photoelectron spectroscopy (XPS) analysis revealed that the adsorption mechanism was mainly attributed to physical microporous filtration and chemical interaction between Cd(II) and the surface functional groups (surface complexation, ion exchange, and electrostatic attraction).

The degradation of decabromodiphenyl ether in the e-waste site by biochar supported nanoscale zero-valent iron /persulfate

Biochar supported nano zero-valent iron (BC-nZVI) synthesized through liquid phase reduction method was used to activate persulfate (PS) for the removal of decabromodiphenyl ether (BDE209) in the soil. The morphology, structure and composition of BC-nZVI were determined by SEM, XRD, XPS and FTIR. Batch experiments were carried out to investigate the effect of different factors, such as the molar ratio of PS to BC-nZVI, pH value of PS solution and reaction temperature, on the degradation efficiency of BDE209. Results showed that when the molar ratio of PS/BC-nZVI was 3:1, pH value was 3, reaction temperature was 40 °C, 82.06% of BDE209 could be removed within 240 min. The process fitted pseudo-first-order kinetics model well and the apparent activation energy (Ea) was 48.92 kJ mol^-1, indicating that the process was controlled by surface reaction. The quenching experiments showed that ·SO₄^- was predominate radical species in the degradation process in acid and neutral condition. However, ·OH played more important role in alkaline condition. GC-MS was used to determine the reaction products for inferring the degradation pathway of BDE209 in soil by BC-nZVI/PS system.

Functionalized Biochar/Clay Composites for Reducing the Bioavailable Fraction of Arsenic and Cadmium in River Sediment

Biochar has frequently been used for the treatment of heavy metal pollution in water and soil; its effect on contaminated sediments requires further research. To improve the ability of biochar to immobilize heavy metals in sediment, we prepared a functionalized biochar/attapulgite composite by pyrolysis of the clay attapulgite and zinc chloride-pretreated rice straw biomass. Compared with the original biochar, the biochar/attapulgite composite had a large increase in specific surface area, pore volume, oxygen-containing functional groups, and cation exchange capacity. Biochar effectively improved the dispersibility of attapulgite as a matrix. The results showed that the biochar/attapulgite composite effectively reduced the bioavailable fraction of arsenic (As) and cadmium (Cd) in river sediment, which was a great improvement compared with the raw biochar. After the sediment was treated with different biochar/attapulgite composites, the concentrations of As and Cd in the overlying water and the porewater, and the content of acid-extractable and toxicity characteristic leaching procedure (TCLP)-extractable As and Cd in the solid phase of the sediment decreased significantly. Both zinc chloride activation and attapulgite improved As and Cd immobilization in sediment when we used the biochar/attapulgite composite. The results suggest that biochar/attapulgite composite can be used as an efficient in situ sorbent amendment to improve the heavy metal immobilization ability of the sediment. Environ Toxicol Chem 2019;38:2337-2347. © 2019 SETAC.

The effect of γ-FeOOH on enhancing arsenic adsorption from groundwater with DMAPAAQ + FeOOH gel composite

Arsenic contamination of groundwater is a serious concern worldwide. The research gaps in removing arsenic are selectivity, regeneration and effective removal rate at neutral pH levels. In this study, we discussed the reasons of the high arsenic adsorption from groundwater of our previously developed adsorbent, a cationic polymer gel, N,N-dimethylamino propylacrylamide, methyl chloride quaternary (DMAPAAQ), loaded with iron hydroxide. We used a transmission electron microscope (TEM) and thermogravimetric analyser (TGA) to detect the iron contents in the gel and ensure its maximum impregnation. We found that the gel contains 62.05% FeOOH components. In addition, we used the Mössbauer spectroscopy to examine the type of impregnated iron in the gel composite and found that it was γ-FeOOH. Finally, we used Fourier transform infrared spectroscopy (FTIR) to examine the surface functional groups present in the gel and the differences in those groups before and after iron impregnation. Similarly, we also investigated the differences of the surface functional groups in the gel, before and after the adsorption of both forms of arsenic. To summarize, this study described the characteristics of the gel composite, which is selective in adsorption and cost effective, however further applications should be investigated.

Tailoring the Assembly of Iron Nanoparticles in Carbon Microspheres toward High-Performance Electrocatalytic Denitrification

Electrocatalytic denitrification is considered as the most promising technology to transform nitrates to nitrogen gas in sewage so far. Although noble metal-based catalysts as a cathode material have reached decent removal capacity of nitrate, the high cost is the main hamper of electrocatalytic reduction. Therefore, the development of alternative catalysis toward highly effective denitrification is imperative yet still remains a significant challenge. Herein, a corchorifolius-like structure, where Fe nanoparticles are sealed in carbon microspheres (CL-Fe@C) with a rough surface, has been elaborately designed by self-assemble strategy. Impressively, the architectured CL-Fe@C microspheres are surrounded with a lot of small iron nanoparticles and contain the high iron content of ∼74%. As a result, an excellent removal capacity of 1816 mg N/g Fe and a high nitrogen selectivity of 98% under a very low nitrate concentration of 100 mg/L are achieved when using the CL-Fe@C microspheres as electrocatalytic denitrification. The present work not only explores high performance electrocatalysis for the denitrification but also promote new inspiration for the preparation of other iron-based functional materials for diverse applications.

Preparation of PVA/tetra-ZnO composite with framework-supported pore-channel structure and the removal research of lead ions

Polyvinyl alcohol (PVA) filled with different kinds of ZnO whisker was prepared by chemical cross-linking reaction. It was found that the ZnO whiskers dispersed uniformly after being modified by 3-aminopropyltriethoxysilane (APTES). The PVA/tetrapod-shaped ZnO (PVA/tetra-ZnO) composites showed better adsorption performance than other kinds of PVA/ZnO composites. The framework-supported pore-channel structure was beneficial for the transmission and adsorption of heavy metal ions, and the formation of "brush" pore-channel of PVA/tetra-ZnO composites can effectively retain and capture the heavy metal ions. The PVA/tetra-ZnO composites presented well adsorption on Pb(II), Cd(II), and Cr(III) ions than Ni(II) and showed relatively selective removal on Pb(II) and Cr(III) ions. The adsorbed heavy metal ions presented gradient distribution with high content in the out layer and low content in the inner layer. Pb(II) adsorption capacity q_e increased gradually with the increase of initial solution concentration and contact time which tended to be stable at 400 mg/L and 800 min. The maximal adsorption capacity q_m obtained by nonlinear fitting reached to about 116 mg/g which was very close to the experiment data. Adsorption isotherm results indicated the monolayer adsorption process of the Langmuir model and the adsorption kinetics data fitted well to the pseudo-second-order model. The adsorption process was spontaneous and the high temperature was in favor of adsorption. The adsorption mechanism was explored as the combination of coordination and ion exchange. Besides, the PVA/tetra-ZnO composites exhibited better stress stability, thermo stability, and favorable regeneration than neat PVA.

Biochar-supported nZVI (nZVI/BC) for contaminant removal from soil and water: A critical review

The promising characteristics of nanoscale zero-valent iron (nZVI) have not been fully exploited owing to intrinsic limitations. Carbon-enriched biochar (BC) has been widely used to overcome the limitations of nZVI and improve its reaction with environmental pollutants. This work reviews the preparation of nZVI/BC nanocomposites; the effects of BC as a supporting matrix on the nZVI crystallite size, dispersion, and oxidation and electron transfer capacity; and its interaction mechanisms with contaminants. The literature review suggests that the properties and preparation conditions of BC (e.g., pore structure, functional groups, feedstock composition, and pyrogenic temperature) play important roles in the manipulation of nZVI properties. This review discusses the interactions of nZVI/BC composites with heavy metals, nitrates, and organic compounds in soil and water. Overall, BC contributes to the removal of contaminants because it can attenuate contaminants on the surface of nZVI/BC; it also enhances electron transfer from nZVI to target contaminants owing to its good electrical conductivity and improves the crystallite size and dispersion of nZVI. This review is intended to provide insights into methods of optimizing nZVI/BC synthesis and maximizing the efficiency of nZVI in environmental cleanup.

Synthesis and characterization of zeolite-based composites functionalized with nanoscale zero-valent iron for removing arsenic in the presence of selenium from water

We studied the sorption of As(V) in single and multi-component (As(V)-Se(VI)) aqueous systems using nanoscale zero-valent iron (nZVI) and nZVI-functionalized zeolite (Z-nZVI) adsorbents. Morphological and physico-chemical characterization of the adsorbents was conducted using X-ray diffraction (XRD), scanning electron microscopy (SEM), surface area and electrophoretic mobility measurements. SEM and XRD analyses showed that Fe-nanoparticle size and crystallinity were better preserved in Z-nZVI than nZVI after As(V) sorption. Highly efficient As(V) removal was achieved for all tested adsorbents with a minimal competition effect of Se(VI). In the single-component system, the equilibrium As(V) sorption time on nZVI and Z-nZVI was 40 and 60 min, respectively, while in the multi-component system, this time was 90 min for both the adsorbents. The Freundlich and pseudo-second-order models provided good fittings for the experimental sorption data (r²>0.96). The As(V) removal capacity was higher using Z-nZVI than nZVI both in the single and multi-component systems, suffering minimal differences in removal in both cases. The results suggested that Z-nZVI had more specific surface sites for As(V) than nZVI and zeolite, which makes Z-nZVI a more effective adsorbent than nZVI for the removal of As(V) from aqueous solutions in the presence of other oxyanions.

Immobilization of Cr(VI) from solution by a graphene oxide-nZVI/biochar composite

A graphene oxide (GO)-nanoscale zerovalent iron (nZVI)-biochar composite (GO-nZVI/BC) was synthesized prior to characterization by X-ray diffraction (XRD), vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy analyses. Batch experiments were performed at different initial Cr(VI) concentrations, contact times, and solution pH values. The effects of coexisting anions and chelating agents were also examined. The results indicated that the removal of Cr(VI) was highly pH-dependent and reached a maximum capacity at pH of 2. The equilibrium data were fitted well with the Langmuir isotherm model, and the kinetic data fitted better with the pseudo-second-order kinetic model. The increasing concentrations of EDTA in aqueous solutions were favorable to the removal of Cr(VI), while NO 3 - significantly inhibited adsorption. Furthermore, the GO-nZVI/BC maintained ~84.5% of its original capacity after aging in the air for 25 weeks. Based on the removal efficiency, GO-nZVI/BC can be considered to be an effective material for water treatment applications. PRACTITIONER POINTS: Biochar-supported graphene oxide-coated nanoscale zerovalent iron (GO-nZVI/BC) was synthesized and used to treat Cr(VI) from solution. Cr(VI) removal was pH-dependent and obeyed the Langmuir isotherm model and pseudo-second-order model. GO-nZVI/BC maintained ~84.5% of its original capacity after aging for 25 w in the air.

Rapid adsorption and reductive degradation of Naphthol Green B from aqueous solution by Polypyrrole/Attapulgite composites supported nanoscale zero-valent iron

Polypyrrole/Attapulgite-supported nanoscale zero-valent iron (PPy/APT-nZVI) composites employed to extract Naphthol Green B (NGB) from aqueous solution, were successfully fabricated by chemical oxidative polymerization and liquid-phase reduction method. Comparison experiment of different materials showed that 99.59% of NGB was removed using PPy/APT-nZVI (1:0.5) after 25 min, much higher than APT, PPy, PPy/APT and nZVI. The morphology and structure of PPy/APT-nZVI (1:0.5) composites were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), which confirmed the high disperse and activity of nZVI after supported by PPy/APT. Furthermore, dynamic studies revealed that removal process was highly consistent with not only the pseudo-second-order model for adsorption but also pseudo-first-order model for degradation process, which proved the removal was controlled by chemical surface-limiting step. A possible removal mechanism, containing prompt adsorption of NGB onto the PPy/APT-nZVI (1:0.5) surface and being degraded by nZVI, was put forward. Additionally, the stability study verified the activity of nZVI can retain longer time than that of single nZVI due to such powerfully protective layers of PPy/APT.

The preparation of bifunctional electrospun air filtration membranes by introducing attapulgite for the efficient capturing of ultrafine PMs and hazardous heavy metal ions

The comprehensive sources of particulate matter (PM) require air purification materials to possess both high filtration efficiencies and low air resistances in an effort to provide healthcare. However, the assembly of multiple-layered filters with different functions leads to high pressure drop and high operating cost. Therefore, a multifunctional air filter that can provide excellent air filtration capacity and healthcare is highly desired. Here, a novel bifunctional polyacrylonitrile/attapulgite hierarchical-structured filter with low air resistance and high adsorption capacity was designed and fabricated by embedding attapulgite nanorods during a facile electrospinning process. The hierarchical polyacrylonitrile/attapulgite membranes showed only a ∼64 Pa resistance for 0.1 μm PM. Another benefit of using the attapulgite nanorods is an adsorption effect for hazardous heavy metal ions that accompany airborne ultrafine PMs. Thereby this hierarchical membrane simultaneously exhibits an enhanced filtration performance and hazardous protection ability. Furthermore, due to the electret effect of the attapulgite nanorods, the surface potential of the membrane remains at above 2.2 kV after 600 min of continuous use, which could improve the air filtration efficiency and ensure the long-term service life of the filters. This work may provide a new approach for the design and development of multifunctional air filters for simultaneously capturing ultrafine PMs and any other accompanying hazardous chemicals.

Optimizing the removal of strontium and cesium ions from binary solutions on magnetic nano-zeolite using response surface methodology (RSM) and artificial neural network (ANN)

The feasibility of using magnetic nano-zeolite (MNZ) to remove cesium and strontium from their binary corrosive solutions was investigated by considering the multi-variant/multi-objective nature of the process. RSM (Response Surface Methodology) and ANN (Artificial Neural Network) were used to model and optimize the removal system and assess sensitive parameters that can affect the process reliability. MNZ is characterized by its high surface area and cation exchange capacity and possesses good regeneration behavior for both elements using citric acid. Its stability is comparable to other sorbents in acidic media and the stability increases in alkaline media, where dissolution rate follow first order reaction on heterogeneous sites. MNZ removes both contaminants simultaneously with small tendency toward Cs, where MNZ is suggested for application in pre-treatment of highly contaminated alkaline solutions. The percentage removal, decontamination factors, and separation factors have different dependency on the effluent/process conditions; this dependency is the same for both contaminants. Sorption kinetics is initially controlled by external mass transfer through the boundaries then intra-particle diffusion dominates the reactions. The process sensitivity to pH changes is attributed to changes in structural elements -species distribution at the solid/aqueous interface. Cs⁺ and Sr⁺² are exchanged with Na⁺ and H⁺, regardless the effluent pH value, and with Al and Fe cations at specific pH. Isosteric heat of sorption calculations indicated that the total heat needed to complete the reaction was considerably reduced by operating the process at optimized temperature.

Synergistic deep removal of As(III) and Cd(II) by a calcined multifunctional MgZnFe-CO3 layered double hydroxide: Photooxidation, precipitation and adsorption

A high removal rate (>99.7%) of combined arsenite (As(III)) and Cd (Cd(II)) in low concentration (1000 μg/L) from contaminated water was achieved by a calcined MgZnFe-CO₃ layered double hydroxide (CMZF) adsorbent. Batch control studies and a series of spectroscopy detection technologies were employed to investigate the removal mechanism and interactions between As(III) and Cd(II) on the interface of water/CMZF. Synergistic adsorption and photooxidation occurred based on the systematical kinetic and isotherm studies. The enhanced removal of As(III) was achieved by the photooxidation, formation of ternary As(III)Cd(II) surface complexes and enhanced hydrogen bond. Meanwhile, oxidative formed negative charged As(V) could reduce the electrostatic repulsion force between Cd(II) cations and play a role as anion bridging, consequently resulted in a stronger attraction between CMZF and Cd(II). Combined with the verdicts of relevant characterizations such as XRD, XPS and EPR, it was assumed that the deep co-removal mechanism could be attributed to the coupling of various processes including intercalation, complexation, photooxidation of As(III) and precipitation of CdCO₃. Moreover, the successful removal of As(III) and Cd(II) from real water matrix qualified the CMZF a potentially attractive adsorbent for both As(III) and Cd(II) deep treatment in practical engineering.

Characterizations and mechanisms for synthesis of chitosan-coated Na-X zeolite from fly ash and As(V) adsorption study

Solid waste fly ash with low aluminum of Yunnan Province in China was used as pristine material to prepared chitosan-coated Na-X zeolite, and the obtained composite material was employed as As(V) adsorbent. Then, the prepared materials were characterized by XRD, FT-IR, and XPS. And the results suggested that the low aluminum fly ash was successfully convert into Na-X zeolite, and the mineralization between Si-OH of the obtained Na-X zeolite and C-OH of chitosan was the dominated mechanism for coated chitosan over the surface of Na-X zeolite. From the batch experiments of As(V) removal, it has been found that the coated chitosan could significantly improve As(V) performance of Na-X zeolite. The optimal working pH for removal As(V) by chitosan-coated Na-X zeolite was attained at pH 2.1 ± 0.1, and the maximum adsorption capacity was 63.23 mg/g. And the adsorption data at different interval time was excellent fitted by pseudo-second-order kinetic model. From the analyze of XPS, the results suggested that As(V) uptake over adsorbent by the bond of As-N and As-O and the surface hydroxyl group of Al-OH and -NH₂ were involved in uptake As(V) from acid wastewater.

Decomposition of Nickel(Ⅱ)-Ethylenediaminetetraacetic acid by Fenton-Like reaction over oxygen vacancies-based Cu-Doped Fe3O4@γ-Al2O3 catalyst: A synergy of oxidation and adsorption

Nickel (Ⅱ)-ethylenediaminetetraacetic acid (Ni-EDTA) complexes are widely present in electroplating effluents. Owing to its chemical stability, Ni-EDTA is hardly removed in traditional Fenton/Fenton-like processes with conventional iron (Fe)-based catalyst. In this study, oxygen vacancies were introduced into our highly efficient and novel Fe₃O₄@γ-Al₂O₃ catalysts using Cu doping for Ni-EDTA decomposition in Fenton-like system. Without noble-metal cocatalyst, the introduction of oxygen vacancies in Cu-doped Fe₃O₄@γ-Al₂O₃ catalysts exhibit excellent Fenton-like activity even in neutral or alkaline conditions. Experimental results revealed that, without the aid of extra energy, Ni-EDTA complexes could be effectively decomposed over oxygen vacancies-based catalyst. Electron paramagnetic resonance (EPR), X-ray photoelectron spectroscopy (XPS), oxygen temperature-programmed desorption (O₂-TPD), and hydrogen temperature-programmed reduction (H₂-TPR) were used to get a deep insight into the decomposition mechanism. Additionally, by employing the Al-containing support, stable layered double-hydroxide phases of NiAl could be formed, indicating that a synergy of oxidation and adsorption could simultaneously take place, which led to the recovery of released Ni²⁺ ions and also reduction in secondary pollution. To investigate the decomposition process of Ni-EDTA over oxygen vacancies-based catalyst, liquid chromatography-quadrupole/electrostatic field orbitrap high resolution mass spectrometry (LC-MS/MS) was employed to identify the generated intermediates, and thus, a plausible decomposition pathway was successfully conceived.

Fabrication of methyl acrylate and tetraethylenepentamine grafted magnetic chitosan microparticles for capture of Cd(II) from aqueous solutions

MCS-MA-TEPA microparticles, with 251.22 mg g^-1 of adsorption capacity for Cd(II), higher than most of the counterparts, were first fabricated by chemical coprecipitation, spray drying, and Michael addition reaction, without any cross-linker participation. These Fe₃O₄-nanoparticle-embedded microparticles of 5.95 μm in size, derived from modifications by methyl acrylate (MA) and tetraethylenepentamine (TEPA) on magnetic chitosan (MCS) microparticles, were of plum-pudding-like and wrinkle-like topography portrayed by TEM and SEM. Such features were beneficial to adsorbent recycling and Cd(II) capture. BET examinations illustrated 6.084 m² g^-1 of specific surface area, 0.015 mL g^-1 of pore volume, and 6.536 nm of pore diameter. FTIR, VSM, XRD, TEM-SAED, TG, and DTG characterizations were indicative of successful synthesis, satisfactory magnetism, well-defined architecture, and good thermostability. Optimal adsorption parameters for Cd(II) were determined via batch experiments. Thermodynamic parameters and adsorption data fitting implied an exothermic, spontaneous, monolayer, and chemisorption process. XPS analyses confirmed a potential adsorption mechanism that N and O atoms on microparticles chelated with Cd(II) ions in solutions. Additionally, MCS-MA-TEPA-Cd(II) microparticles were magnetically separated easily and had outstanding reusability even after five-time recycling, with a slight adsorption capability loss (< 12%). Altogether, MCS-MA-TEPA microparticles might serve as a promising adsorbent for contaminated water scavenging.

Synthesis of fly ash based zeolite-reduced graphene oxide composite and its evaluation as an adsorbent for arsenic removal

A zeolite-reduced graphene oxide (ZrGO) based composite was synthesized to remove arsenic from water. To make a low-cost adsorbent, zeolite was synthesized using an inexpensive waste material; fly ash, which was further used to produce the ZrGO composite. Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and Raman spectra were used to characterize the morphology and surface composition of the synthesized materials. Synthesized materials: zeolite, rGO and ZrGO were evaluated as an adsorbent to remove arsenic from water. The results indicated that all three were able to adsorb arsenic from water but the removal efficiency of ZrGO was the best as it was able to bring down the arsenic concentration within the WHO permissible limits. The maximum adsorption capacity for 100 μg/L of initial arsenic concentration was found to be 49.23 μg/g. Results indicate that pseudo second order kinetics describes the arsenic adsorption on ZrGO. Adsorption isotherm study for ZrGO shows best fit for Redlich-Peterson model of adsorption.

Nanomaterials as versatile adsorbents for heavy metal ions in water: a review

Over the years, heavy metal pollution has become a very serious environmental problem worldwide. Even though anthropogenic sources are believed to be the major cause of heavy metal pollution, they can also be introduced into the environment from natural geogenic sources. Heavy metals, because of their toxicity and carcinogenicity, are considered to be the most harmful contaminants of groundwater as well as surface water, a serious threat to both human and aquatic life. Nanomaterials due to their size and higher surface area to volume ratio show some unique properties compared to their bulk counterpart and have drawn significant attention of the scientific community in the last few decades. This large surface area can make these materials as effective adsorbents in pollution remediation studies. In this review, an attempt has been made to focus on the applicability of different types of nanomaterials, such as clay-nanocomposites, metal oxide-based nanomaterials, carbon nanotubes, and various polymeric nanocomposites as adsorbents for removal of variety of heavy metals, such as As, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, Sn, U, V, and Zn, from water as reported during the last few years. This work tries to analyze the metal-nanomaterial interactions, the mechanism of adsorption, the adsorption capacities of the nanomaterials, and the kinetics of adsorption under various experimental conditions. The review brings forward the relation between the physicochemical properties of the nanomaterials and heavy metal adsorption on them.

Biomass facilitated phase transformation of natural hematite at high temperatures and sorption of Cd2+ and Cu2

Phase changes of natural hematite are often practiced to improve heavy metal removal and magnetism for easy recycling. In this work, pinewood biomass (PB) and natural hematite (H) admixtures were pyrolyzed at 300, 450 and 600 °C under N₂ environment to prepare HBC nanocomposites (HBC300, HBC450 and HBC600). The X-ray diffraction (XRD) confirmed the reductive transformation of hematite (crystallite size ≈ 47 nm) into magnetite (25 nm) and further to wustite (25 nm) and zerovalent iron (48 nm). The Langmuir isotherms showed that the maximum sorption capacities of HBC300, HBC450, and HBC600 were 173, 138, and 130 mmol kg^-1 for Cd²⁺, and 359, 172, and 197 mmol kg^-1 for Cu²⁺, respectively. The higher pH up to 5 increased sorption of both Cd²⁺ and Cu²⁺, whereas the higher ionic strength (0.05-0.4 M) decreased Cd²⁺ sorption. Sorption of Cd²⁺ and Cu²⁺ by HBC300 was accompanied by one order of magnitude greater cation release than HBC450 and HBC600. In a binary system, Cd²⁺ sorption was depressed by over four times in presence of Cu²⁺. Overall, ion exchange was more pronounced for HBC300, and Cu²⁺ was more favorably retained by specific sorption than Cd²⁺. The greater magnetism of HBC nanoparticles favors separation from aqueous solutions.

Coupling interaction between porous biochar and nano zero valent iron/nano α-hydroxyl iron oxide improves the remediation efficiency of cadmium in aqueous solution

Based on the interaction between mesoscopic biochar materials and nanomaterials, the synergistic mechanism of the two materials in the process of cadmium remediation was studied. K₂CO₃ activated porous biochar (KBC) loaded with nano-zero-valent iron (nZVI)/nano-α-hydroxy-iron oxide (nHIO) was studied. Macroscopically, batch adsorption experiments were carried out to describe the adsorption properties of the composites. Microscopically, the changes of surface chemical states were characterized by electron microscopy, XRD, FTIR and XPS. Combining the macroscopic and microscopic characteristics, the synergistic mechanism between biochar and nZVI/nHIO was comprehensively analyzed. The strong synergistic effects between biochar and nano-zero-valent iron (nZVI)/nano-α-hydroxy-iron oxide (nHIO) were found, which improved the removal efficiency of cadmium (Cd) in aqueous solution. The results showed that the loading of nZVI/nHIO reduced the specific surface area to 178.6 m² g^-1 and 272.2 m² g^-1, respectively, but the adsorption capacity of Cd increased to 22.37 mg g^-1 and 26.43 mg g^-1, respectively, which was more than three times that of KBC (7.02 mg g^-1). The interaction between nZVI/nHIO and Cd was enhanced by the complexation of surface functional groups, but the coupling effects were different. The coupling mechanism of Cd on nZVI@KBC was complexation - reduction. Cd was partly reduced in the removal process. While for nHIO@KBC, the existence of Fe (III) on the surface of biochar increased the number and species of oxygen-containing functional groups and enhanced complexation. The existence of synergistic mechanism will provide theoretical basis for the preparation of high efficient nanocomposites and expand the application of nanomaterials in the field of environment.