Occurrences and removal of pharmaceuticals and personal care products (PPCPs) in drinking water and water/sewage treatment plants: A review

Human health and ecological risk assessment of 98 pharmaceuticals and personal care products (PPCPs) detected in Indian surface and wastewaters

The release of pharmaceuticals and personal care products (PPCPs) in environmental waters has become an urgent issue due to their pseudo-persistent traits. The present study was undertaken to conduct a screening-level risk assessment of 98 PPCPs, detected in different water matrices (treated wastewater, surface water, and groundwater) of India, for evaluating ecological risk (risk to fish, daphnia, and algae), human health risk, and antimicrobial resistance (AMR) selection risk by following risk quotient (RQ) based methodology. In the present study, 47% of the detected PPCPs in Indian waters were found to exert a possible risk (RQ > 1) to either aquatic species and human health, or cause AMR selection risk. 17 out of 25 antibiotics detected in the environmental waters were found to pose a threat of AMR selection. 11 out of 49 pharmaceuticals were found to exert human health risk from ingesting contaminated surface water, whereas only 2 pharmaceuticals out of 25 were found to exert risk from the intake of groundwater. Very high RQs (>1000) for few pharmaceuticals were obtained, signifying a great potential of the detected PPCPs in causing severe health concern, aquatic toxicity, and AMR spread. Within India, special attention needs to be given to the pharmaceutical hubs, as the environmental waters in these regions were found to be severely contaminated with drug residues resulting in extremely high RQs. The present study will be helpful in prioritizing the detected PPCPs in the environmental waters of India, for which immediate attention and enforceable guidelines are required.

Nitrosation and nitration of diclofenac and structurally related nonsteroidal anti-inflammatory drugs (NSAIDs) in nitrifying activated sludge

Diclofenac (DCF) is a highly consumed non-steroidal anti-inflammatory drug that is excreted partially metabolized and is poorly removed during wastewater treatment. Previous findings demonstrated that DCF in wastewater treatment plants (WWTP) is partially removed to nitro/nitroso compounds. The reactive nitrogen species, that are microbially produced during nitrification in the activated sludge of WWTP, were suspected to be involved in the transformation of DCF. Therefore, here, we investigated the molecular features governing such biotransformation and the role played by nitrifying bacteria by biodegradation experiments at lab scale in enriched nitrifying sludge bioreactors spiked with DCF and other structurally related non-steroidal anti-inflammatory drugs (NSAIDs). We provided evidence of the incorporation of NO/NO₂ groups into DCF originated from ammonia by isotopically labelled biodegradation experiments. Nitroso and nitro-derivatives were tentatively identified for all NSAIDs studied and biotransformation mechanisms were proposed. Our findings from biodegradation experiments performed under different incubation conditions suggested that biotransformation of DCF and its related NSAIDs might not only be microbially mediated by ammonia oxidizing bacteria, but other nitrifiers co-occurring in the activated sludge as ammonia oxidizing archaea and nitrite oxidizing bacteria. Follow-up studies should be conducted to disentangle such complex behaviour in order to improve removal of these contaminants in WWTPs.

Engineered macroalgal and microalgal adsorbents: Synthesis routes and adsorptive performance on hazardous water contaminants

Colourants, micropollutants and heavy metals are regarded as the most notorious hazardous contaminants found in rivers, oceans and sewage treatment plants, with detrimental impacts on human health and environment. In recent development, algal biomass showed great potential for the synthesis of engineered algal adsorbents suitable for the adsorptive management of various pollutants. This review presents comprehensive investigations on the engineered synthesis routes focusing mainly on mechanical, thermochemical and activation processes to produce algal adsorbents. The adsorptive performances of engineered algal adsorbents are assessed in accordance with different categories of hazardous pollutants as well as in terms of their experimental and modelled adsorption capacities. Due to the unique physicochemical properties of macroalgae and microalgae in their adsorbent forms, the adsorption of hazardous pollutants was found to be highly effective, which involved different mechanisms such as physisorption, chemisorption, ion-exchange, complexation and others depending on the types of pollutants. Overall, both macroalgae and microalgae not only can be tailored into different forms of adsorbents based on the applications, their adsorption capacities are also far more superior compared to the conventional adsorbents.

Ecotoxicity of cationic cellulose polymers to aquatic biota: The influence of charge density

Better performances of cellulose-based polymers can be achieved by adjust their architecture including the density of cationic modifications. In this study, the influence of cationic substitution on the ecotoxicity of four quaternized hydroxyethyl cellulose polymers (SK-H, SK-L, SK-M, SK-MH) was studied, using an aquatic biota acute ecotoxicity classification, and rheological and physicochemical characterization. The ecotoxicity characterization was achieved by performing standard ecotoxicity assays with seven key trophic level species: Vibrio fischeri, Raphidocelis subcapitata, Chlorella vulgaris, Daphnia magna, Brachionus calyciflorus, Heterocypris incongruens, and Danio rerio. Median effective concentrations were used to compute hazard concentrations, through the species sensitive distribution curves method. The microalga C. vulgaris and rotifer B. calyciflorus were the most sensitive species to the studied polymers. The SK-H variant was highly toxic to the rotifer. Overall, variants with intermediate levels of cationic charge (SK-M, SK-MH) presented the lowest toxicity. The SK-M variant showed the lowest value of maximum acceptable concentration (0.00354 mg/L), thus being indicated as the least toxic variant. Therefore, the obtained results suggest that industry could direct the development of this type of polymers by tailoring its cationic substitution to moderate levels, in such a way that both functionality and environmental toxicity could be maximized.

High microwave responsivity Co-Bi25FeO40 in synergistic activation of peroxydisulfate for high efficiency pollutants degradation and disinfection: Mechanism of enhanced electron transfer

Cobalt doped Bi₂₅FeO₄₀ was used as a heterogeneous catalyst in microwave (MW) co-activation of peroxydisulfate (PDS) system for organic contaminant purification and disinfection simultaneously. Due to low charge-transfer resistance and fast electron migration, Co-Bi₂₅FeO₄₀ showed superior catalytic efficiencies for activation PDS to degrade over 92.0% of bisphenol A (BPA) with the initial concentrations ranging from 40 mg/L to 120 mg/L in 5.0 min. The non-radical oxidation pathway via electron transfer regime on the surface of Co-Bi₂₅FeO₄₀ was the dominant reactive species in the reaction system. Benefit from the energy transfer and cross-coupling reactions of microwave, the Co-Bi₂₅FeO₄₀/MW/PDS system can generate abundant reactive sites to facilitate the formation of more surface-bonding complexes. Microwave energy can be absorbed by Co-Bi₂₅FeO₄₀ catalysts to promote activation of PDS and production of nanobubbles. The generated nanobubbles increase the temperature of the local solution to promote the reaction. The Co-Bi₂₅FeO₄₀/MW/PDS system also exhibited excellent bactericidal capability for Escherichia coli (E.coli). The catalysts, oxidants and microwaves acted on E. coli to form physical, and oxidative pressure simultaneously, causing cell damaged and made bacterial death. This work provides prospects toward high-efficiency integration of contaminant purification and pathogenic microorganisms inactivation.

Multi-component adsorption study by using bone char: modelling and removal mechanisms

Highly efficient simultaneous removal of paracetamol and Cu²⁺ ions from aqueous solutions was accomplished by using bovine bone char (BC). The adsorption behaviour was determined by kinetic and equilibrium studies of both single and binary system solutions. BC is a predominantly mesoporous material with a surface area of 103 m² g^-1. The influence of the initial pH on Cu²⁺ removal was tested, suggesting that the optimal pH was 3.0. The removal of paracetamol from single and binary systems was 9.45 and 12.7%, respectively. On the other hand, the Cu²⁺ removal was 36.2% for a single system, suggesting a higher affinity for BC. Moreover, in the case of binary mixtures, the presence of paracetamol led to an enhanced affinity of Cu²⁺ due to a synergistic/cooperative mechanism, which led to a copper removal of 97.3%. The cooperative model was successfully adjusted to the equilibrium data of the binary systems. The modelling results indicated the formation of a first adsorption layer where paracetamol and copper are retained, and a second layer with a great affinity for copper ions after the formation of a Cu-paracetamol complex, leading to higher removal of Cu²⁺.

Piezoelectric effect enhanced photocatalysis in environmental remediation: State-of-the-art techniques and future scenarios

Photocatalysis has been widely used as an advanced oxidation process to control pollutants effectively. However, environmental photocatalysis' decontamination efficiency is restricted to the photogenerated electron-hole pairs' rapid recombination. Recently, emerging investigations have been directed to generate internal electric field by piezoelectric effect to enhance the separation efficiency of photogenerated charge carriers for better photocatalytic performance; however, there are still huge knowledge gaps on the rational application of piezo-photocatalysis in environmental remediation and disinfection. Thus, we have conducted a comprehensive review to better understand the physicochemical properties of piezoelectric materials (non-centrosymmetric crystal structures, piezoelectric coefficient, Young's modulus, and etc.) and current study states. We also elucidated the strategy of piezo-photo catalysis system constructions (mono-component, core-shell structure, and etc.) and underlying mechanisms of enhanced remediation performance. Addressing the current challenges and future scenarios (degradation of organic pollutants, disinfection, and etc.), the present review would shed light on the advanced wastewater treatment development towards sustainable control of emerging containments.

Model Predictive Control Strategy for the Degradation of Pharmaceutically Active Compounds by UV/H2O2 Oxidation Process

Hydroxyl radical (•OH) scavenging demand can be an indicator that represents the water quality characteristics of raw water. It is one of the key parameters predicting UV/H2O2 system performance and affects the operating parameters. Based on the •OH scavenging demand, we developed a model predictive control strategy to meet the target compound removal efficiency and energy consumption simultaneously. Selected pharmaceutically active compounds (PhACs) were classified into three groups depending on the UV direct photolysis and susceptibility to •OH. Group 1 for photo-susceptible PhACs (acetaminophen, amoxicillin, diclofenac, iopromide, ketoprofen, and sulfamethoxazole); group 2 for PhACs susceptible to both direct photolysis and •OH oxidation (bisphenol A, carbamazepine, ibuprofen, naproxen, ciprofloxacin, and tetracycline); and group 3 for photo-resistant PhACs (atenolol, atrazine, caffeine, and nitrobenzene). The results of modeling to achieve 90% removal of PhACs at N and B plants were as follows. For group 2, the optimized operating parameter ranges were as follow (N plant: UV 510–702 mJ cm−2, H2O2 2.96–3.80 mg L−1, EED 1088–1302 kWh m−3; B plant: UV dose 1179–1397 mJ cm−2, H2O2 dose 3.56–7.44 mg L−1, EED 1712–2085 kWh m−3). It was confirmed that the optimal operating conditions and EED values changed according to the •OH scavenging demand.

Pilot-Scale Biological Activated Carbon Filtration–Ultrafiltration System for Removing Pharmaceutical and Personal Care Products from River Water

Biological activated carbon (BAC) biofilter coupling ultrafiltration (UF) is a promising process for the treatment of river water contaminated by pharmaceutical and personal care products (PPCPs). However, the pilot-scale study should be conducted to reveal the long-term removal performance and the respective contributions of BAC and UF. In this study, a BAC-UF system with treatment capacity of 0.16 m3 h−1 was operated for 130 days. The water quality was analyzed in terms of CODMn, UV254, NH4+-N, and PPCPs. The results showed that both BAC and UF were related to the removal of organic matter (CODMn and UV254), achieving the removals of 56.00% and 55.25%, respectively. Similarly, BAC and UF were both relevant to the removal effects of ammonia nitrogen, nitrite, and nitrate. Moreover, the BAC-UF process was featured with a high efficiency in the removal of PPCPs, and the average removal of total PPCPs reached 47.84%, especially anhydroerythromycin, sulfachloropyridazine, sulfadiazine, trimethoprim, and caffeine. Besides, it was found that the BAC unit played a key role in PPCPs removal and the UF unit also degraded them by the biomass on UF membranes. Therefore, this study proved the removal performance of BAC-UF for treating popular pollutants from river water, and the BAC-UF process in this work can be considered as a feasible method of producing clean drinking water.

A novel electro-Fenton process coupled with sulfite: Enhanced Fe3+ reduction and TOC removal

To promote the reduction of Fe³⁺ and improve the mineralization of organic pollutants, a novel electro-Fenton coupled with sulfite (Fe³⁺-EF/sulfite) process was constructed, which was superior to Fe³⁺-EF process in terms of carbamazepine (CBZ) degradation and mineralization with 5.99 times enhancement in degradation rate constant and 15.7 times enhancement on TOC removal. The complexation of Fe³⁺ and sulfite prevented the precipitation of Fe³⁺, reduced Fe³⁺ to Fe²⁺, and accelerated the iron cycle, so that H₂O₂ utilization efficiency (0.051 mg_TOC mg_H2O2^-1) was greatly improved and electric energy consumption was greatly reduced (0.081 kWh g^-1 TOC). The quenching experiments and EPR test confirmed that the reactive species, such as SO₃^•-, SO₄^•-, ^•OH, O₂^•- and ¹O₂ were responsible for the degradation of CBZ. This process also expanded the pH application range from 3 to 9 with satisfactory CBZ removal efficiency. This work verified the suitability of the Fe³⁺-EF/sulfite process for different sulfites (sulfite and bisulfite), typical pollutants (atrazine, sulfamethazine, rhodamine B) and real wastewater with 2.1-18.7 folds enhancement in degradation rate. The Fe³⁺-EF/sulfite process can achieve deep mineralization with low cost and simple operation, which has a broad and cost-effective application prospect in removal of refractory organic pollutants.

Adsorptive removal of sulfosalicylic acid from aqueous medium by iron(III)-loaded magnetic chitosan/graphene oxide

In this study, an iron(III)-loaded magnetic chitosan/graphene oxide composite (Fe-MCG) was synthesized and applied for the adsorptive removal of sulfosalicylic acid (SSA) in aqueous solution. The results obtained from the application of various characterization techniques such as scanning electron microscopy (SEM), vibrating-sample magnetometry (VSM), and X-ray photoelectron spectroscopy (XPS) prove the successful formation of the composite with enhanced microstructure and superparamagnetic properties. The adsorption capacity of Fe-MCG towards SSA via batch mode reaches up to 135 mg/g at 293 K. The adsorption of SSA onto Fe-MCG is driven by monolayer adsorption with the chemical and physical adsorption processes both playing active roles. The Langmuir isotherm and pseudo-second-order kinetic models were observed to best describe the equilibrium adsorption and kinetic processes, respectively. The values obtained for the associated thermodynamic parameters confirm that the adsorptive process is spontaneous, exothermic and entropy-increasing. The efficacy and reusability of the spent Fe-MCG was studied using 0.01 mol/L NaOH solution. The kinetic process for the desorption of SSA from Fe-MCG is well described by the pseudo-second-order kinetic model. Based on the experimental results and XPS analysis, the underlying mechanisms for the uptake of SSA onto Fe-MCG involve electrostatic forces, complexation, π-π stacking, and hydrogen bonding. Overall, the excellent features of Fe-MCG enhance its potential as an adsorbent for the sequestration of SSA in environmental media.

Development of a metal-free black phosphorus/graphitic carbon nitride heterostructure for visible-light-driven degradation of indomethacin

The development of affordable and efficient technologies for the removal of pharmaceuticals and personal care products (PPCPs) from water has recently been the subject of extensive attention. In this study, a black phosphorus/graphitic carbon nitride (BP-g-C₃N₄) heterostructure is fabricated as an extremely active metal-free photocatalyst via a newly-developed exfoliation strategy. The BP-g-C₃N₄ shows an 11 times better decomposition rate of a representative PPCPs-type pollutant, indomethacin (IDM), compared to the widely-used P25 TiO₂ under real-sunlight illumination. Also, its visible-light activity is even better than that of the best photocatalysts previously developed, but only consumes 1/10-1/4 of the catalyst. The results show that BP performs a cocatalyst-like behavior to catalyze the generation of reactive oxygen species, thus speeding up the decomposition of IDM. In addition, the BP-g-C₃N₄ photocatalyst also exhibits excellent IDM removal efficiency in authentic water matrices (tap water, surface water, and secondarily treated sewage effluent). Large-scale application demonstration under natural sunlight further reveals the practicality of BP-g-C₃N₄ for real-world water treatment operations. Our work will open up new possibilities in the development of purely metal-free photocatalysts for "green" environmental remediation applications.

Chabazite from Campanian Ignimbrite Tuff as a Potential and Sustainable Remediation Agent for the Removal of Emerging Contaminants from Water

The technological performance of a chabazite-rich rock belonging to the Campanian Ignimbrite formation, outcropping in the nearby of San Mango sul Calore (southern Italy), has been evaluated for the sorption and release of ibuprofen sodium salt after a surface modification of the starting geomaterial using two different chlorinated surfactants. Equilibrium sorption isotherms and in vitro loading tests demonstrated that the maximum sorption capacities of this geomaterial reach up to 24.5 and 13.5 mg/g, respectively, for zeolite modified with cetylpyridinium and benzalkonium. These results, obtained by non-linear mathematical modeling of the experimental curves, are definitely compatible with the concentrations of the most common non-steroidal anti-inflammatory drugs (such as ibuprofen) in wastewaters, which have been recently considered as contaminants of emerging concern. This investigation also encourages a new possible sustainable exploitation of the lithified yellow facies of Campanian Ignimbrite, although future developments will be focused on using more stable and eco-friendlier two-tailed surfactants.

Application of Natural Coagulants for Pharmaceutical Removal from Water and Wastewater: A Review

Pharmaceutical contamination threatens both humans and the environment, and several technologies have been adapted for the removal of pharmaceuticals. The coagulation-flocculation process demonstrates a feasible solution for pharmaceutical removal. However, the chemical coagulation process has its drawbacks, such as excessive and toxic sludge production and high production cost. To overcome these shortcomings, the feasibility of natural-based coagulants, due to their biodegradability, safety, and availability, has been investigated by several researchers. This review presented the recent advances of using natural coagulants for pharmaceutical compound removal from aqueous solutions. The main mechanisms of natural coagulants for pharmaceutical removal from water and wastewater are charge neutralization and polymer bridges. Natural coagulants extracted from plants are more commonly investigated than those extracted from animals due to their affordability. Natural coagulants are competitive in terms of their performance and environmental sustainability. Developing a reliable extraction method is required, and therefore further investigation is essential to obtain a complete insight regarding the performance and the effect of environmental factors during pharmaceutical removal by natural coagulants. Finally, the indirect application of natural coagulants is an essential step for implementing green water and wastewater treatment technologies.

Medicines as an emergent contaminant: the review of microbial biodegration potential

Emerging environmental contaminants, such as medicine waste, are of great concern to the scientific community and to the local environmental and health departments because of their potential long-term effects and ecotoxicological risk. Besides the prolonged use of medicines for the development of modern society, the elucidation of their effect on the ecosystem is relatively recent. Medicine waste and its metabolites can, for instance, cause alterations in microbial dynamics and disturb fish behavior. Bioremediation is an efficient and eco-friendly technology that appears as a suitable alternative to conventional methods of water waste and sludge treatment and has the capacity to remove or reduce the presence of emerging contaminants. Thus, this review has the objective of compiling information on environmental contamination by common medicines and their microbial biodegradation, focusing on five therapeutic classes: analgesics, antibiotics, antidepressants, non-steroidal anti-inflammatory drugs (NSAIDs), and contraceptives. Their effects in the environment will also be analyzed, as well as the possible routes of degradation by microorganisms.

Point or non-point source: Toxicity evaluation using m-POCIS and zebrafish embryos in municipal sewage treatment plants and urban waterways

Municipal sewage treatment plants (STPs) have been regarded as an important source of organic contaminants in aquatic environment. To assess the impact of STPs on occurrence and toxicity of STP-associated contaminants in receiving waterways, a novel passive sampler modified from polar organic chemical integrative sampler (m-POCIS) was deployed at the inlet and outlet of a STP and several upstream and downstream sites along a river receiving STP effluent in Guangzhou, China. Eighty-seven contaminants were analyzed in m-POCIS extracts, along with toxicity evaluation using zebrafish embryos. Polycyclic musks were the predominant contaminants in both STP and urban waterways, and antibiotics and current-use pesticides (e.g., neonicotinoids, fiproles) were also ubiquitous. The m-POCIS extracts from downstream sites caused significant deformity in embryos, yet the toxicity could not be explained by the measured contaminants, implying the presence of nontarget stressors. Sewage treatment process substantially reduced embryo deformity, chemical oxygen demand, and contamination levels of some contaminants; however, concentrations of neonicotinoids and fiproles increased after STP treatment, possibly due to the release of chemicals from perturbed sludge. Source identification showed that most of the contaminants found in urban waterways were originated from nonpoint runoff, while cosmetics factories and hospitals were likely point sources for musks and antibiotics, respectively. Although the observed embryo toxicity could not be well explained by target contaminants, the present study showed a promising future of using passive samplers to evaluate chemical occurrence and aquatic toxicity concurrently. Zebrafish embryo toxicity significantly decreased after sewage treatment, but higher toxicity was observed for downstream samples, demonstrating that urban runoff may produce detrimental effects to aquatic life, particularly in rainy season. These results highlight the relevance of monitoring nonpoint source pollution along with boosting municipal sewage treatment infrastructure.

Antibiotic residues in environment: antimicrobial resistance development, ecological risks, and bioremediation

The overuse of antibiotics and their disposal without processing are leading the environment and its inhabitants towards a serious health emergency. There is abundance of diverse antibiotic resistance genes and bacteria in environment, which demands immediate attention for the effective removal of antibiotics. There are physical and chemical methods for removal, but the generation of toxic byproducts has directed the efforts towards bioremediation for eco-friendly and sustainable elimination of antibiotics from the environment. Various effective and reliable bioremediation approaches have been used, but still antibiotic residues pose a major global threat. Recent developments in molecular and synthetic biology might offer better solution for engineering of microbe-metabolite biodevices and development of novel strains endowed with desirable properties. This review summarizes the impact of antibiotics on environment, mechanisms of resistance development, and different bioremediation approaches.

Effect of colloidal fluorescence properties on the complexation of chloramphenicol and carbamazepine to the natural aquatic colloids

The complexation mechanism between pharmaceuticals and natural colloids is still uncertain due to the complexity, heterogeneity, and polydispersity of colloids. Therefore, this study investigated the effect of fluorescence properties on the complexation of chloramphenicol (CAP) and carbamazepine (CBZ) to the colloids from Poyang Lake Basin based on the multiple spectroscopic techniques and methods. Three-dimensional excitation-emission matrix fluorescence spectroscopy-parallel factor analysis results illustrated that two humic-like components and two protein-like components of colloids from the rivers and lakes were identified, with the much higher fluorescence intensity of the protein-like substance observed in lake samples. The protein-like substance decreased dramatically with the addition of CAP and CBZ, suggesting its higher binding capacity towards these drugs, especially for CBZ. In addition, the fluorescence quenching titration was proceeded to explore the binding mechanism between the colloids and the pharmaceuticals. Results of synchronous fluorescence spectra and two-dimensional correlation spectroscopy demonstrated that the fluorescence quenching effect occurred preferentially between the protein-like substances and the pharmaceuticals, with the stronger complexation for CBZ. Ryan-Weber model fitting results showed that the stability constant ranged from 4.02 to 5.04 with the higher binding capacity observed for the tryptophan-like substance. Combined, the fluorescence components in aquatic colloids could be significantly impacted the complexation of the pharmaceuticals. This study provides deep insights into the fate and pollution protection of pharmaceuticals.

A review on recent trends in the removal of emerging contaminants from aquatic environment using low-cost adsorbents

Emerging contaminants (ECs), a class of contaminants with low concentrations but significant harm, have received a lot of attention in recent times. ECs comprises of various chemicals that enter the environment every day. In today's modern lifestyle, we use many chemical-based products. These persist in wastewater and ultimately enter the water bodies, causing serious problems to the human and aquatic ecosystem. This is because the conventional wastewater treatment methods are inefficient in identifying and removing such contaminants. Aiming for a long-term, effective solution to this issue, Adsorption was proposed. Although several adsorbents are already present in the market, which have proved beneficial in removing such ECs, not all are affordable. This article reviews replacing costly adsorbents with agriculture-based biomass that are abundant, inexpensive, and biodegradable and possess excellent adsorption capacity. The objectives of this article is to look at adsorption as a viable treatment option for emerging pollutants, as well as sophisticated and cost-effective emerging contaminants treatment options.

Luminescent porous metal–organic gels for efficient adsorption and sensitive detection of chlortetracycline hydrochloride assisted by smartphones and test paper-based analytical device

Developing dual functional materials for chlortetracycline hydrochloride (CTC) adsorption and detection is of great importance for wastewater treatment and pollution monitoring. Herein, three novel (Fe-Tb) JLUE-MOGs are synthesized through the...

Potential application of machine learning for exploring adsorption mechanisms of pharmaceuticals onto biochars

The increasing accumulation of pharmaceuticals in aquatic ecosystems could impair freshwater quality and threaten human health. Despite the adsorption of pharmaceuticals on biochars is one of the most cost-effective and eco-friendly removal methods, the wide variation of experimental designs and research aims among previous studies pose significant challenge in selecting biochar for optimal removal. In this work, literature data of 1033 sets with 21 variables collected from 267 papers over ten years (2010-2020) covering 19 pharmaceuticals onto 88 biochars were assessed by different machine learning (ML) algorithms i.e., Linear regression model (LM), Feed-forward neural networks (NNET), Deep neutral networks (DNN), Cubist, K-nearest neighbor (KNN), and Random forest (RF), to predict equilibrium adsorption capacity (Q_e) and explore adsorption mechanisms. LM showed the best performance on ranking importance of input variables. Except for initial concentration of pharmaceuticals, Q_e was strongly governed by biochars' properties including specific surface area (BET), pore volume (PV), and pore structure (PS) rather than pharmaceuticals' properties and experimental conditions. The most accurate model for estimating Q_e was achieved by Cubist, followed by KNN, RF, KNN, NNET and LM. The generalization ability was observed by the tuned Cubist with 26 rules for the prediction of the unseen data. This study not only provides an insightful evidence for data-based adsorption mechanisms of pharmaceuticals on biochars, but also offers a potential method to accurately predict the biochar adsorption performance without conducting any experiments, which will be of high interests in practice in terms of water/wastewater treatment using biochars.

Remediation of pharmaceuticals from contaminated water by molecularly imprinted polymers: a review

The release of pharmaceuticals into the environment induces adverse effects on the metabolism of humans and other living species, calling for advanced remediation methods. Conventional removal methods are often non-selective and cause secondary contamination. These issues may be partly solved by the use of recently-developped adsorbents such as molecularly imprinted polymers. Here we review the synthesis and application of molecularly imprinted polymers for removing pharmaceuticals in water. Molecularly imprinted polymers are synthesized via several multiple-step polymerization methods. Molecularly imprinted polymers are potent adsorbents at the laboratory scale, yet their efficiency is limited by template leakage and polymer quality. Adsorption performance of multi-templated molecularly imprinted polymers depends on the design of wastewater treatment plants, pharmaceutical consumption patterns and the population serviced by these wastewater treatment plants.

Environmental occurrence and ecological risks of psychoactive substances

Psychoactive substances are ubiquitous in the environment at low concentrations, and tobacco, cannabis, etc. are all widely-existing examples. Given their potent biological activity, psychoactive substances are suspected to be harmful to the environment, and reports of their ecological risks are gradually increasing. Since the 1990s, the investigations into psychoactive substances have made remarkable progress, yet some research fields still need to be modernised. For example, the unification of standardised analytical methods as well as the supplementation of occurrence literature. In addition, a relatively lagging risk evaluation system caused by a lack of toxicity data is particularly in need of improvement. The purpose of this article is to develop a review of current research on psychoactive substances, including analytical methods, distribution in environmental compartments, and ecological risk assessment, as well as to point out deficiencies and development prospects and to offer motivation for enhancing the research level in this field.

A critical review on ibuprofen removal from synthetic waters, natural waters, and real wastewaters by advanced oxidation processes

Ibuprofen (IBP) is one ubiquitous drug prescribed as anti-inflammatory, analgesic, and antipyretic. It has been detected in effluents of wastewater plant treatments, sewage sludge, hospital wastewaters, surface waters, and drinking water due to its continuous release to the environment, mainly from the excretion in the urine of animals and humans. IBP is a carcinogenic and non-steroidal endocrine disrupting drug with harmful effects over fungal, bacterial, algae, microorganisms, crustacean, and fish species, and can be potentially hazard for human health. Since conventional treatments remove inefficiently this drug, many advanced oxidation processes (AOPs) have been developed aiming their abatement from waters to avoid their harmful health problems. This paper presents an exhaustive and critical review on the application of AOPs to treat synthetic waters, natural waters, and real wastewaters polluted with IBP alone or mixed with other common drugs covering up to 2020. The characteristics and main results obtained for single, hybrid, and sequential treatments are described. Dielectric barrier or pulsed-corona discharges are detailed among the single processes. Hybrid processes such as photocatalysis (UV/H₂O₂, UV/chlorine, TiO₂/UV), hybrid ozonation (O₃/H₂O₂, electro-peroxone, catalytic ozonation), Fenton-based processes (photo-Fenton, electro-Fenton, photoelectro-Fenton), zero-valent iron, ultrasonic, peroxymonosulfate, and persulfate, are discussed. The effect of the kind of irradiation (UV, visible, solar) on photo-assisted processes is analyzed. Sequential processes with biological pre- or post-treatments using or not membranes for natural water and real wastewater remediation are described. Finally, 38 by-products detected during IBP removal by AOPs are reported, allowing envisaging three parallel pathways for its initial degradation.

Occurrence, transformation, bioaccumulation, risk and analysis of pharmaceutical and personal care products from wastewater: a review

Almost all aspects of society from food security to disease control and prevention have benefited from pharmaceutical and personal care products, yet these products are a major source of contamination that ends up in wastewater and ecosystems. This issue has been sharply accentuated during the coronavirus disease pandemic 2019 (COVID-19) due to the higher use of disinfectants and other products. Here we review pharmaceutical and personal care products with focus on their occurrence in the environment, detection, risk, and removal.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10311-022-01498-7.

Multi-functional metal-organic frameworks for detection and removal of water pollutions

Water pollutions have caused serious threats to the aquatic environment and human health, it is of great significance to monitor and control their contents in water. Compared with the traditional...

Occurrence of organic micropollutants in municipal landfill leachate and its effective treatment by advanced oxidation processes

Landfilling is the most prominently adopted disposal technique for managing municipal solid waste across the globe. However, the main drawback associated with this method is the generation of leachate from the landfill site. Leachate, a highly concentrated liquid consisting of both organic and inorganic components arises environmental issues as it contaminates the nearby aquifers. Landfill leachate treatment by conventional methods is not preferred as the treatment methods are not much effective to remove these pollutants. Advanced oxidation processes (AOPs) based on both hydroxyl and sulfate radicals could be a promising method to remove the micropollutants completely or convert them to non-toxic compounds. The current review focuses on the occurrence of micropollutants in landfill leachate, their detection methods and removal from landfill leachate using AOPs. Pharmaceuticals and personal care products occur in the range of 10^-1 to more than 100 μg L^-1 whereas phthalates were found below the detectable limit to 384 μg L^-1, pesticides in the order of 10^-1 μg L^-1 and polyaromatic hydrocarbons occur in concentration from 10^-2 to 114.7 μg L^-1. Solid-phase extraction is the most preferred method for extracting micropollutants from leachate and liquid chromatography (LC) - mass spectrophotometer (MS) for detecting the micropollutants. Limited studies have been focused on AOPs as a potential method for the degradation of micropollutants in landfill leachate. The potential of Fenton based techniques, electrochemical AOPs and ozonation are investigated for the removal of micropollutants from leachate whereas the applicability of photocatalysis for the removal of a wide variety of micropollutants from leachate needs in-depth studies.

Evaluation of diclofenac degradation effect in "active" and "non-active" anodes: A new consideration about mineralization inclination

This work investigates the electrochemical oxidation (EO) of diclofenac (DCF) in water with Ti/Ti₄O₇, Ti/Ru-Ir, Ti/Sb-SnO₂ and Ti/PbO₂ electrodes. Scanning electron microscope and X-ray diffraction results suggest that Ti/Ti₄O₇ has porous stacked surface morphology and Ti/Sb-SnO₂ possesses the smallest grain size. Linear sweep voltammetry test results indicate that PbO₂ has the highest oxygen evolution potential, while Ti/Ti₄O₇ and Ti/Ru-Ir show better oxygen evolution activity. DCF degradation results reveal that PbO₂ possessed the highest DCF removal (R_DCF = 99.2%) and chemical oxygen demand (COD) removal (R_COD = 97.0%), the fastest COD degradation rate (k = 0.0275 min^-1, R² = 0.964), the lowest specific energy consumption (EC_DCF = 1.81 kWh^.g DCF^-1, EC_TOC = 6.90 kWh^.g TOC^-1). The toxicity variation of DCF during EO process on PbO₂ is rise first and then to fall. Considering the differences of the four electrodes in residual, conversion and mineralization aspects, mineralization selectivity (MS) was proposed to estimate the mineralization inclination of electrodes during EO process, and PbO₂ displays the strongest mineralization inclination (MS = 0.594). In addition, the possible degradation pathway of DCF on PbO₂ electrode indicates a composite behavior of conversion and mineralization. All of them above indicate the promising application potential of PbO₂ in lower concentration pharmaceuticals and personal care products wastewater treatment. Moreover, MS could be employed as a supplementary index to assess the different inclinations of this composite behavior on various electrodes used for electrochemical treatment of organics in later studies.

Phosphate-induced activation of peracetic acid for diclofenac degradation: Kinetics, influence factors and mechanism

Activating peroxides to produce active substances is the key to advanced oxidation processes (AOPs), but this usually requires energy or is accompanied by additional contaminants. In this study, diclofenac (DCF) was effectively removed by peracetic acid (PAA) in phosphate buffer (PBS). According to the results of radical scavenging experiments and electron paramagnetic resonance (EPR), hydroxyl radical (•OH) and organic radicals (i.e., CH₃C(=O)OO• and CH₃C(=O)O•) generated from PBS-activated PAA might be the dominant reactive species responsible for DCF degradation. At neutral pH, PBS/PAA system exhibited the best degradation efficiency on DCF. Presence of NO₃^-, SO₄^2- and Cl^- had little effect on the removal of DCF, while HCO₃^- and natural organic matter (NOM) significantly inhibited DCF degradation in PBS/PAA system, resulting in the lower degradation efficiency of DCF in natural waters than that in ultrapure water. Finally, four possible degradation pathways, including hydroxylation, formylation, dehydrogenation and dechlorination, were proposed based on the detected reaction products. This study suggests that PBS used to control solution pH should be applied cautiously in PAA-based AOPs.

Probabilistic framework for assessing ecological risk of Contaminants of Emerging Concern: Application to a Canadian lake system

Contaminants of Emerging Concern (CECs) in natural water pose risks to ecosystems. The concentration of CECs varies spatially and temporally, and their estimated ecotoxicities differ widely by toxicological studies. This study extensively reviewed literature on ecological risk assessment and proposed a probabilistic framework for assessing ecological risk and its uncertainties (aleatory and epistemic). The framework integrated Adverse Outcome Pathway in risk assessment and was applied to a Canadian lake system for seven CECs: salicylic acid, acetaminophen, caffeine, carbamazepine, ibuprofen, drospirenone, and sulfamethoxazole. Altogether 264 water samples were collected and analyzed from 15 sites May 2016 to September 2017. Phytoplankton, zooplankton, and fish were also sampled and analyzed. The results show ecological risk estimates (Risk Quotient, RQ) varied considerably indicating a range of uncertainty. Based on the conservative estimate, the central tendency estimate of the ecological risk of mixture compounds was medium (RQ = 0.6) including drospirenone. However, the reasonably maximum estimate of the risk was high (RQ = 1.4) for mixture compounds including drospirenone. The high risk is primarily due to drospirenone as its individual risk was high (RQ = 1.1) to fish. The specific site and time of high drospirenone exposure was identified for implementing control measures. Classification of ecotoxicity values based on environmental parameters such as climate and water quality, can reduce uncertainty in the risk estimate.

Treatment of PPCPs and disinfection by-product formation in drinking water through advanced oxidation processes: Comparison of UV, UV/Chlorine, and UV/H2O2

The presence of pharmaceutical and personal care products (PPCPs) in water is concerning because of their potential threat to ecosystems and human health. Studies have indicated that these emerging contaminants cannot be effectively removed through conventional water treatment. In this study, the efficacy of various treatments - chlorination, ultraviolet (UV), UV/Chlorine, and UV/H₂O₂ processes - in PPCP removal from water was compared. The effects of reaction time, oxidant concentration, pH, and water matrix and the generation of disinfection by-products (DBPs) were also assessed. The removal of PPCPs was discovered to be superior when the concentration of oxidants was higher. In addition, pH affected the reactivity of chlorine with some of the investigated chemicals. Chorine itself plays a minor role in the UV/Chlorine process because it serves as a reactant for the generation of free radicals rather than oxidants. Matrix had a weak effect on the removal of PPCPs in the various treatment processes (mostly within 10%). UV could not effectively remove acetylsalicylic acid, ibuprofen, benzophenone, oxybenzone, caffeine, N,N-diethyl-meta-toluamide, or most estrogens. When chlorine or hydrogen peroxide (H₂O₂) was used with UV, the efficiency of removal of all selected PPCPs was greatly improved (≥56.5% for UV/Chlorine and ≥27.6% for UV/H₂O₂) within 5 min. Although the PPCP removal efficiency of UV/Chlorine was higher than that of UV/H₂O₂, UV/H₂O₂ resulted in smaller amounts of DBP formation in the treated water. By contrast, UV/Chlorine resulted in higher concentrations of trihalomethanes (21.6%), haloacetonitriles (29.4%), and haloketones (147.2%).

Numerical investigation of ibuprofen removal from pharmaceutical wastewater using adsorption process

In the present study, a mathematical modelling was developed to investigate ibuprofen adsorption from pharmaceutical wastewater into activated carbon and sonicated activated carbon. The developed model was dissolved based on the finite element method. Effect of different operating parameters including particle porosity and diameter as well as ibuprofen diffusion coefficient in solution on the amount of ibuprofen adsorption at different time point and position in the particle were evaluated. It was found good agreement between experimental values and modelling results in terms of ibuprofen adsorption as a function time. The 84.5% and 92.5% of maximum adsorption was achieved for the AC and SAC at the centre of particle after 150 min. Increasing the particle porosity and ibuprofen diffusion coefficient was improved the ibuprofen adsorption into the adsorbent. However, the particle diameter had negative impact on the system performance. There was a decrease in solute adsorption from 84.10 to 7.30 mg/g and from 106 to 15.73 mg/g for the AC and SAC respectively with increasing the particle radius from 173 to 500 µm. Finally, it was concluded that the particle specifications play important role in the adsorption process as it was observed considerable change in the amount of adsorption at different positions in the particle with changing the particle specifications.

Data Analytics Determines Co-occurrence of Odorants in Raw Water and Evaluates Drinking Water Treatment Removal Strategies

A complex dataset with 140 sampling events was generated using triple quadrupole gas chromatography-mass spectrometer to track the occurrence of 95 odorants in raw and finished water from 98 drinking water treatment plants in 31 cities across China. Data analysis identified more than 70 odorants with concentrations ranging from not detected to thousands of ng/L. In raw water, Pearson correlation analysis determined that thioethers, non-oxygen benzene-containing compounds, and pyrazines were classes of chemicals that co-occurred, and geosmin and p(m)-cresol, as well as cyclohexanone and benzaldehyde, also co-occurred, indicating similar natural or industrial sources. Based on classification and regression tree analysis, total dissolved organic carbon and geographical location were identified as major factors affecting the occurrence of thioethers. Indoles, phenols, and thioethers were well-removed through conventional and advanced treatment processes, while some aldehydes could be generated. For other odorants, higher removal was achieved by ozonation-biological activated carbon (39.3%) compared to the conventional treatment process (14.5%). To our knowledge, this is the first study to systematically identify the major odorants in raw water and determine suitable treatment strategies to control their occurrence by applying data analytics and statistical methods to the complex dataset. These provide informative reference for odor control and water quality management in drinking water industry.

Algae bioprocess to deal with cosmetic chemical pollutants in natural ecosystems: A comprehensive review

Elevated demand and extensive exploitation of cosmetics in day-to-day life have hiked up its industrial productions worldwide. Organic and inorganic chemicals like parabens, phthalates, sulfates, and so forth are being applied as constituents towards the formulations, which tend to be the mainspring ecological complication due to their enduring nature and accumulation properties in various sections of the ecosystem. These cosmetic chemicals get accrued into the terrestrial and aquatic systems on account of various anthropogenic activities involving agricultural runoff, industrial discharge, and domestic effluents. Recently, the use of microbes for remediating persistent cosmetic chemicals has gained immense interest. Among different forms of the microbial community being applied as an environmental beneficiary, algae play a vital role in both terrestrial and aquatic ecosystems by their biologically beneficial metabolites and molecules, resulting in the biobenign and efficacious consequences. The use of various bacterial, fungal, and higher plant species has been studied intensely for their bioremediation elements. The bioremediating property of the algal cells through biosorption, bioassimilation, biotransformation, and biodegradation has made it favorable for the removal of persistent and toxic pollutants from the environment. However, the research investigation concerned with the bioremediation potential of the algal kingdom is limited. This review summarizes and provides updated and comprehensive insights into the potential remediation capabilities of algal species against ecologically hazardous pollutants concerning cosmetic chemicals.

Heterogeneous activation of peroxymonosulfate by Co-doped Fe2O3 nanospheres for degradation of p-hydroxybenzoic acid

Environmental remediation has become more effective when using nanotechnologies. In this study, iron oxide (α-Fe₂O₃) nanospheres with different cobalt doping levels (xCo-Fe₂O₃) were synthesised and applied in the heterogeneous activation of peroxymonosulfate (PMS) for the degradation of p-hydroxybenzoic acid (p-HBA). The catalyst (3Co-Fe₂O₃) with 3% Co doping exhibits the best performance for PMS activation, possibly because of the larger specific surface area and the tailored catalyst surface as confirmed by X-ray photoelectron spectroscopy (XPS). Reaction parameters were investigated to optimise the degradation efficiency. The metal ions leaching tests confirmed the higher stability of the catalyst, thanks to the leaching suppression by the doping of Co²⁺. The main contribution of free radicals (SO₄^•- and ^•OH) was confirmed by electron paramagnetic resonance (EPR) spectra, whereas partial contribution of oxygen anions and singlet oxygen (O₂^•-, ¹O₂) was observed during the quenching tests. Finally, a radical based degradation mechanism was proposed for the removal of p-HBA. It is expected to open up a novel perspective for the application of iron oxide as a potential catalyst for the removal of emerging contaminants.

Facile fabrication of Fe/Fe3C embedded in N-doped carbon nanofiber for efficient degradation of tetracycline via peroxymonosulfate activation: Role of superoxide radical and singlet oxygen

The toxic metal ions leaching and metal nanoparticles agglomeration were the critical issues for metal-based carbon materials during the peroxymonosulfate (PMS) activation processes. Herein, a facile strategy was first proposed that zero-dimensional Fe/Fe₃C nanoparticles were embedded in one-dimensional N-doped carbon nanofiber (Fe/Fe₃C@NCNF) to solve the above challenges. The as-obtained Fe/Fe₃C@NCNF-800 possessed a low E_a value (11.7 kJ/mol) and exhibited high activity for activating PMS to degrade tetracycline (TC) in a wide range of pH 3-11. As expected, the iron ions leaching concentration of Fe/Fe₃C@NCNF-800 was very low (0.082 mg/L). Meanwhile, the Fe/Fe₃C@NCNF-800 was easily recovered from the reaction solution due to its magnetic properties. Both superoxide radicals (O₂^∙-) and non-radical of singlet oxygen (¹O₂) were the primary reactive oxygen species (ROS) in the Fe/Fe₃C@NCNF-800/PMS system via quenching tests and electron spin resonance spectroscopy (ESR). The catalytic mechanism suggested that the Fe/Fe₃C and graphitic N were the main active sites in the Fe/Fe₃C@NCNF-800 for PMS activation. This work provided a facile method for the preparation of Fe-based carbon materials with high catalytic ability, low metal leaching and easy recycling, showing a broad prospect for environmental applications.

Influence of selected antibiotics on respirometric activity of activated sludge

The main topic of this study is to determine the effect of selected antibiotics on the respirometric activity of sewage sludge microorganisms. Within the practical part of the work, several respirometric measurements were performed with activated sludge from a wastewater treatment plant, while the influence of three selected antibiotics — sulfamethoxazole, sulfapyridine, and ciprofloxacin, on sludge activity was monitored. The aim of the work was to point out the inhibitory effect of all monitored compounds on sludge activity and to quantify the inhibitory effect. For sulfamethoxazole (in the concentration range of 0.142—1.42 mg·L−1), the determined inhibition was in the range of 9.67—27.7 %, depending on the concentration of the test substance and the type of respirometric measurements. For sulfapyridine, inhibition values ranged from 1.13 % to 31.9 % for the concentration range from 0.134 to 1.34 mg·L−1. Ciprofloxacin inhibited the activity of activated sludge microorganisms in the range of 4.55 % to 28.8 % (at CPX concentrations from 0.104 to 1.04 mg·L−1).

Iron-based metal-organic framework: Synthesis, structure and current technologies for water reclamation with deep insight into framework integrity

Water is a supreme requirement for the existence of life, the contamination from the point and non-point sources are creating a great threat to the water ecosystem. Advance tools and techniques are required to restore the water quality and metal-organic framework (MOFs) with a tunable porous structure, striking physical and chemical properties are an excellent candidate for it. Fe-based MOFs, which developed rapidly in recent years, are foreseen as most promising to overcome the disadvantages of traditional water depolluting practices. Fe-MOFs with low toxicity and preferable stability possess excellent performance potential for almost all water remedying techniques in contrast to other MOF structures, especially visible light photocatalysis, Fenton, and Fenton-like heterogeneous catalysis. Fe-MOFs become essential tool for water treatment due to their high catalytic activity, abundant active site and pollutant-specific adsorption. However, the structural degradation under external chemical, photolytic, mechanical, and thermal stimuli is impeding Fe-MOFs from further improvement in activity and their commercialization. Understanding the shortcomings of structural integrity is crucial for large-scale synthesis and commercial implementation of Fe-MOFs-based water treatment techniques. Herein we summarize the synthesis, structure and recent advancements in water remediation methods using Fe-MOFs in particular more attention is paid for adsorption, heterogeneous catalysis and photocatalysis with clear insight into the mechanisms involved. For ease of analysis, the pollutants have been classified into two major classes; inorganic pollutants and organic pollutants. In this review, we present for the first time a detailed insight into the challenges in employing Fe-MOFs for water remediation due to structural instability.

Simultaneous hydrogen production and ibuprofen degradation by green synthesized Cu2O/TNTAs photoanode

This study aimed to produce a clean energy, hydrogen, and to remove pollutants simultaneously in water by photoelectrochemical (PEC) method. The photo-anode of cuprous oxide modified titanate nanotube arrays (Cu₂O/TNTAs) was synthesized by using lactic acid, green tea, and coffee as reductants individually. The characterizations of Cu₂O/TNTAs were performed by ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS), field emission scanning electron microscope (FE-SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) to investigate the physical and chemical properties such as structure, crystallization, element contents, and optical performance. The electrochemical analyses of Cu₂O/TNTAs showed the photo-current of Cu₂O/TNTAs-t (using green tea as reductant) was 2.4 times higher than pure TNTAs, illustrating the effective separation of electron-hole pairs after Cu₂O modification. The photoelectrochemical performances of Cu₂O/TNTAs-t and Cu₂O/TNTAs-c (using coffee as the reductant) were better than Cu₂O/TNTAs-L (using lactic acid as the reductant) in terms of photo-current density, Ibuprofen degradation, and hydrogen generation, implying that depositing Cu₂O on TNTAs can significantly improve the electron mobility by reducing the recombination rate of electron-hole pairs, which is beneficial to simultaneously ibuprofen degradation and hydrogen production.

Critical review on hazardous pollutants in water environment: Occurrence, monitoring, fate, removal technologies and risk assessment

Water is required for the existence of all living things. Water pollution has grown significantly, over the decades and now it has developed as a serious worldwide problem. The presence and persistence of Hazardous pollutants such as dyes, pharmaceuticals and personal care products, heavy metals, fertilizer and pesticides and their transformed products are the matter of serious environmental and health concerns. A variety of approaches have been tried to clean up water and maintain water quality. The type of pollutants present in the water determines the bulk of technological solutions. The main objective of this article was to review the occurrences and fate of hazardous contaminants (dyes, pharmaceuticals and personal care products, heavy metals, and pesticides) found in wastewater effluents. These effluents mingle with other streams of water and that are utilized for a variety of reasons such as irrigation and other domestic activities that is further complicating the issue. It also discussed traditional treatment approaches as well as current advances in hazardous pollutants removal employing graphite oxides, carbon nanotubes, metal organic structures, magnetic nano composites, and other innovative forms of useable materials. It also discussed the identification and quantification of harmful pollutants using various approaches, as well as current advancements. Finally, a risk assessment of hazardous pollutants in water is provided in terms of the human health and the environment. This data is anticipated to serve as a foundation for future improvements in hazardous pollutant risk assessment. Furthermore, future studies on hazardous pollutants must not only emphasize on the parent chemicals, as well as on their possible breakdown products in various media.

Adsorption removal of ibuprofen and naproxen from aqueous solution with Cu-doped Mil-101(Fe)

Due to the excellent anti-inflammatory effect, ibuprofen and naproxen have been widely used in the people's daily life, which inevitably leads to their pollution in natural water environment. The removal of these chemicals from water has drawn great interests. Here, a new Cu-doped Mil-101(Fe) was synthesized through a one-step solvothermal method and successfully applied for the adsorption removal of ibuprofen and naproxen from water. A series of characterization techniques (FESEM, TEM, N₂ adsorption-desorption analysis, XRD and FT-IR) were applied to explore the physicochemical properties of the prepared Cu-doped Mil-101(Fe). The adsorption performances of the Cu-doped Mil-101(Fe) for ibuprofen and naproxen, including the adsorption kinetics and isotherms, and effects of diverse influencing factors (pH, ionic strength, and natural organic matter) were examined through batch experiments. The adsorption kinetics and isotherms of ibuprofen and naproxen on the Cu-doped Mil-101(Fe) fitted well with the pseudo-second-order model and Langmuir model, respectively. The maximum adsorption capacities of Cu-doped Mil-101(Fe) were 497.3 and 396.5 mg/g for ibuprofen and naproxen, respectively. The pH of solution in a range of 3-9 exerted no significant effects on the adsorption process. The adsorption was almost unaffected by the ionic strength and humic acid. The π-π interaction and hydrogen bond interaction between the adsorbent and adsorbates were found to be accountable for adsorption. The Cu-doped Mil-101(Fe) was readily regenerated by ethanol and could be repeatedly used.

Preparation of ammonium-modified cassava waste-derived biochar and its evaluation for synergistic adsorption of ternary antibiotics from aqueous solution

Mono- and co-sorption of the three antibiotics i.e., norfloxacin (NOR), sulfamerazine (SMR) and oxytetracycline (OTC), to raw and NH₄⁺-modified cassava waste biochar added to aqueous solutions were investigated. The NH₄⁺-modified biochar showed higher sorption affinity for both NOR and SMR than the raw biochar, while the raw biochar showed higher sorption affinity for OTC than the modified biochar. The highest sorption to both biochars in both the mono- and competitive sorption systems was found for OTC followed by NOR and SMR. Sorption equilibrium in all systems analyzed was reached within 15 h. Electrostatic interactions among the ionic antibiotics in the multicomponent solution increased NOR and SMR sorption to both biochars. Antibiotics' mono- and co-sorption to biochars decreased with increasing solution pH. The co-sorption of NOR and SMR to the two biochars was regulated by π-π electron-donor-acceptor (EDA) interactions; besides, electrostatic interactions and Hydrogen (H-) bonding played an important part. Cation bridging might have been a potential mechanism to contribute to SMR sorption to the raw biochar, and OTC sorption to the NH₄⁺-modified biochar. These observations will improve our understanding of the simultaneous removal of multiple antibiotics from water or wastewater.

Fabrication of paper-based analytical devices using a PLA 3D-printed stencil for electrochemical determination of chloroquine and escitalopram

In recent years, the use of prescribed and non-prescribed drugs has increased. Therefore, advances in new technologies and sensors for detecting molecules in natural environments are required. In this work, a 3D-printed polylactic acid stencil is used to fabricate paper-based analytical devices (ePADs). Herein, we report the use of carbon-based lab-manufactured conductive ink for the fabrication of sensors towards the detection of chloroquine and escitalopram. For each batch, eight ePADs were successfully fabricated. Firstly, the fabricated sensors were evaluated morphologically by scanning electron microscopy and electrochemically by cyclic voltammetry and electrochemical impedance spectroscopy experiments. The sensors displayed a well-defined voltammetric profile in the presence of the redox couple, when compared to a commercial carbon screen-printed electrode. Differential pulse voltammetry conducted the detection of chloroquine and escitalopram with detection limits of 4.0 and 0.5 µmol L⁻¹, respectively. The ePADs fabricated using the 3D stencil are here presented as alternatives for the fabrication of electrochemical analytical devices.