Microbial degradation and other environmental aspects of microplastics/plastics

Activities of Microplastics (MPs) in Agricultural Soil: A Review of MPs Pollution from the Perspective of Agricultural Ecosystems

Microplastics are emerging persistent pollutants which have attracted increasing attention worldwide. Although microplastics have been widely detected in aquatic environments, their presence in soil ecosystems remains largely unexplored. Plastic debris accumulates in farmland, causing serious environmental problems, which may directly affect food substances or indirectly affect the members in each trophic level of the food chain. This review summarizes the origins, migration, and fate of microplastics in agricultural soils and discusses the interaction between microplastics and the components in farmland from the perspectives of toxicology and accumulation and deduces impacts on ecosystems by linking the organismal response to an ecological role. The effects on farmland ecosystem function are also discussed, emphasizing the supply of agricultural products, food chain pathways, carbon deposition, and nitrogen cycling and soil and water conservation, as microplastic pollution will affect agricultural ecosystems for a long period, posing an ecological risk. Finally, several directions for future research are proposed, which is important for reducing the effect of microplastics in agricultural systems.

Rogue one: A plastic story

Plastic comprises of variety of polymers and has many applications, but the waste generated by plastic pose threat to environment and marine life. Plastic can be classified into two types: thermoplastics and thermosetting and are divided into 7 different categories: (Polyethylene Terephthalate [PETE], High-Density Polyethylene [HDPE], Polyvinyl Chloride [PVC], Low-Density Polyethylene [LDPE], Polypropylene [PP], Polystyrene or Styrofoam [PS] & Polycarbonate or ABS [others]). To curb the deleterious effects of plastic waste various methods have been devised and utilized that include chemical, physical and biological treatments. One of the aspects primarily focused by the researchers is the phenomenon of biodegradation and there are many microorganisms (bacteria) that have the ability to carry out this particular process. These bacteria assist biodegradation by production of several enzymes like PETases and MHETases. There are few microorganisms that have been listed which cannot be applied for industrial use due to its low biodegradation capacity. To overcome this problem, PHA is one of the alternatives to replace the synthetic plastic due to its high degrading capacity.

To Waste or Not to Waste: Questioning Potential Health Risks of Micro- and Nanoplastics with a Focus on Their Ingestion and Potential Carcinogenicity

Micro- and nanoplastics (MNPs) are recognized as emerging contaminants, especially in food, with unknown health significance. MNPs passing through the gastrointestinal tract have been brought in context with disruption of the gut microbiome. Several molecular mechanisms have been described to facilitate tissue uptake of MNPs, which then are involved in local inflammatory and immune responses. Furthermore, MNPs can act as potential transporters ("vectors") of contaminants and as chemosensitizers for toxic substances ("Trojan Horse effect"). In this review, we summarize current multidisciplinary knowledge of ingested MNPs and their potential adverse health effects. We discuss new insights into analytical and molecular modeling tools to help us better understand the local deposition and uptake of MNPs that might drive carcinogenic signaling. We present bioethical insights to basically re-consider the "culture of consumerism." Finally, we map out prominent research questions in accordance with the Sustainable Development Goals of the United Nations.

Microplastics in marine and aquatic habitats: sources, impact, and sustainable remediation approaches

Plastic trash dumped into water bodies degrade over time into small fragments. These plastic fragments, which come under the category of micro-plastics (MPs), are generally 0.05-5 mm in size, and due to their small size they are frequently consumed by aquatic organisms. As a result, widespread MPs infiltration is a global concern for the aquatic environment, posing a threat to existing life forms. MPs easily bind to other toxic chemicals or metals, acting as vector for such toxic substances and introducing them into life forms. Polyethylene, polypropylene, polystyrene, and other polymers are emerging pollutants that are detrimental to all types of organisms. The main route for MPs into the aquatic ecosystems is through the flushing of urban wastewater. The current paper investigates the origin, environmental fate, and toxicity of MPs, shedding light on their sustainable remediation.

Graphical abstract

Unraveling the plastic degradation potentials of the plastisphere-associated marine bacterial consortium as a key player for the low-density polyethylene degradation

The omnipresent accumulation and non-degradable nature of plastics in the environment are posing an ever-increasing ecological threat. In this study, a total of 97 bacteria were isolated from macroplastic debris collected from the coastal environments of Andaman Island. The isolates were screened for LDPE degradation potential and were identified based on phenotypic, biochemical, and molecular characterization. 16S rDNA-based identification revealed that three-three isolates of each belong to the genus Oceanimonas and Vibrio, two were closely related to the genus Paenibacillus whereas, one-one was associated with the genus Shewanella, Rheinheimera, and Bacillus, respectively. A bacterial consortium was formulated using the top four isolates based on their individual LDPE degradation potentials. A significant increase (p < 0.05) in the mean LDPE degradation (47.07 ± 6.67% weight-loss) and change in thickness was observed after 120 days of incubation. FTIR spectrum, ¹³C NMR, and TG-DSC analyses demonstrated changes in the LDPE sheets' functional groups, crystallinity, and in thermal properties after 120 days of incubation. The SEM and AFM images confirmed bacterial attachments, an increase in surface roughness and deformities on LDPE sheets. This study reports a bacterial consortium that can efficiently degrade the plastics and can be used in providing eco-friendly mitigation of plastic waste.

Exploring the role of microbial biofilm for industrial effluents treatment

Biofilm formation on biotic or abiotic surfaces is caused by microbial cells of a single or heterogeneous species. Biofilm protects microbes from stressful environmental conditions, toxic action of chemicals, and antimicrobial substances. Quorum sensing (QS) is the generation of autoinducers (AIs) by bacteria in a biofilm to communicate with one other. QS is responsible for the growth of biofilm, synthesis of exopolysaccharides (EPS), and bioremediation of environmental pollutants. EPS is used for wastewater treatment due to its three-dimensional matrix which is composed of proteins, polysaccharides, humic-like substances, and nucleic acids. Autoinducers mediate significantly the degradation of environmental pollutants. Acyl-homoserine lactone (AHL) producing bacteria as well as quorum quenching enzyme or bacteria can effectively improve the performance of wastewater treatment. Biofilms-based reactors due to their economic and ecofriendly nature are used for the treatment of industrial wastewaters. Electrodes coated with electro-active biofilm (EAB) which are obtained from sewage sludge, activated sludge, or industrial and domestic effluents are getting popularity in bioremediation. Microbial fuel cells are involved in wastewater treatment and production of energy from wastewater. Synthetic biological systems such as genome editing by CRISPR-Cas can be used for the advanced bioremediation process through modification of metabolic pathways in quorum sensing within microbial communities. This narrative review discusses the impacts of QS regulatory approaches on biofilm formation, extracellular polymeric substance synthesis, and role of microbial community in bioremediation of pollutants from industrial effluents.

Adsorption behavior of Cu(II) and Cr(VI) on aged microplastics in antibiotics-heavy metals coexisting system

Recently, the microplastics, as well as the compound pollution of heavy metals and antibiotics, in the aqueous environment have attracted increasing attention, but studies on the behavior of heavy metals on aged microplastics in antibiotics-heavy metals coexisting system are limited. Herein, to explore the impact of antibiotics on the adsorption of heavy metals by aged microplastics, the adsorption behavior of Cu(II) and Cr(VI) on aged polystyrene (PS) and polyvinyl chloride (PVC) were investigated. The results presented that ciprofloxacin (CIP) had negative and positive impacts on the adsorption of Cu(II) and Cr(VI) by aged microplastics, respectively. Moreover, the existence of CIP seemed to have no evident effect on the type of adsorption isotherm model and kinetic model in most adsorption systems of Cu(II). The negative impact of CIP on adsorption of Cu(II) may result from the competition adsorption and high steric hindrance effect, while non-specific interactions between neutral antibiotic-heavy metal complexes and the hydrophobic surface of aged microplastics as well as CIP as bridges influenced positively on adsorption of Cr(VI) on aged microplastics. This work was concerned with the interaction between binary pollutants and aging microplastics to clarify the risks of microplastics in the aqueous environment.

Current status of microplastics pollution in the aquatic environment, interaction with other pollutants, and effects on aquatic organisms

Microplastics, as emerging pollutants, have received great attention in the past few decades due to its adverse effects on the environment. Microplastics are ubiquitous in the atmosphere, soil, and water bodies, and mostly reported in aqueous environment. This paper summarizes the abundance and types of microplastics in different aqueous environments and discusses the interactions of microplastics with other contaminants such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), antibiotics, and heavy metals. The toxicity of microplastics to aquatic organisms and microorganisms is addressed. Particularly, the combined toxic effects of microplastics and other pollutants are discussed, demonstrating either synergetic or antagonistic effects. Future prospectives should be focused on the characterization of different types and shapes of microplastics, the standardization of microplastic units, exploring the interaction and toxicity of microplastics with other pollutants, and the degradation of microplastics, for a better understanding of the ecological risks of microplastics.

The potential effects of microplastics on human health: What is known and what is unknown

Microplastic contamination is ubiquitous in aquatic and terrestrial environments, found in water, sediments, within organisms and in the atmosphere and the biological effects on animal and plant life have been extensively investigated in recent years. There is growing evidence that humans are exposed to microplastics via ingestion of food and drink and through inhalation. Despite the prevalence of contamination, there has been limited research on the effects of microplastics on human health and most studies, to date, analyse the effects on model organisms with the likely impacts on human health being inferred by extrapolation. This review summarises the latest findings in the field with respect to the prevalence of microplastics in the human-environment, to what extent they might enter and persist in the body, and what effect, if any, they are likely to have on human health. Whilst definitive evidence linking microplastic consumption to human health is currently lacking, results from correlative studies in people exposed to high concentrations of microplastics, model animal and cell culture experiments, suggest that effects of microplastics could include provoking immune and stress responses and inducing reproductive and developmental toxicity. Further research is required to explore the potential implications of this recent contaminant in our environment in more rigorous clinical studies.

Biodegradation of plastics for sustainable environment

Plastics are a kind of utility product that has become part and parcel of one's life. Their continuous usage, accumulation, and contamination of soil and water pose a severe threat to the biotic and abiotic components of the environment. It not only increases the carbon footprints but also contributes to global warming. This calls for an urgent need to develop novel strategies for the efficient degradation of plastics. The microbial strains equipped with the potential of degrading plastic materials, which can further be converted into usable products, are blessings for the ecosystem. This review comprehensively summarizes the microbial technologies to degrade different plastic types, such as polyethylene (PE), polyethylene terephthalate (PET), polystyrene (PS), polyvinyl chloride (PVC), polypropylene (PP), and polyurethane (PU). The study also describes the utilization of degraded plastic material as feedstock for its conversion into high-value chemicals.

The environmental distribution and removal of emerging pollutants, highlighting the importance of using microbes as a potential degrader: A review

Emerging pollutants (EPs) create a worldwide concern owing to their low concentration and severe toxicity to the receptors. The prominent emerging pollutants categories as pharmaceutical and personal care product, plasticizer, surfactants, and persistent organic pollutants. Typically, EPs are widely disseminated in the aquatic ecosystem and capable of perturbing the physiology of water bodies as well as humans. The primary sources of EPs in the environment include anthropogenic release, atmospheric deposition, untreated or substandard treated wastewater, and extreme weather events. Intensive research has been done covering the environmental distribution, ecological disturbance, fate, and removal of EPs in the past decades. However, a systematic review on the distribution of EPs in the engineered and natural aquatic environment and the degradation of different EPs by using anaerobic sludge, aerobic bacteria, and isolated strains are limited. This review article aims to highlight the importance, application, and future perceptions of using different microbes to degrade EPs. Overall, this review article illustrates the superiority of using non-cultivable and cultivable microbes to degrade the EPs as an eco-friendly approach. Practically, the outcomes of this review paper will build up the knowledge base solutions to remove EPs from the wastewater.

Microplastic Extraction from the Sediment Using Potassium Formate Water Solution (H2O/KCOOH)

Microplastics (MPs) are considered an important stratigraphic indicator, or ‘technofossils’, of the Anthropocene. Research on MP abundance in the environment has gained much attention but the lack of a standardized procedure has hindered the comparability of the results. The development of an effective and efficient method of MP extraction from the matrix is crucial for the proper identification and quantifying analysis of MPs in environmental samples. The procedures of density separation used currently have various limitations: high cost of reagents, limited solution density range, hazardous reagents, or a combination of the above. In this research, a procedure based on density separation with the use of potassium formate water solution (H2O/KCOOH) in controlled conditions was performed. Experimental sediment mixtures, spiked with polyethylene (PE), polystyrene (PS), polyurethane (PUR) and polyethylene terephthalate (PET) particles were prepared and an extraction procedure was tested in the context of a weight-based quantitative analysis of MPs. This article discusses the effectiveness and safety of the method. It additionally provides new information on the interactions between MP particles and the mineral matter of the sediment. Results were acquired with the use of instrumental methods, namely thermogravimetry (TG), Fourier Transform Infrared (FTIR) spectroscopy, Field Emission Scanning Electron microscopy and Energy Dispersive spectrometry (SEM/EDS), as well as X-ray fluorescence (XRF) analysis.

A critical review of microplastics in the soil-plant system: Distribution, uptake, phytotoxicity and prevention

Microplastics (MPs) are creating an emerging threat on the soil ecosystems and are of great global concern. However, the distribution in soil-plant system, as well as the phytotoxicity and impact mechanisms of MPs remain largely unexplored so far. This study introduced the diverse sources of MPs and showed the significant spatial variation in the global geographic distribution of MPs contamination based on data collected from 116 studies (1003 sampling sites). We systematically discussed MPs phytotoxicity, such as plant uptake and migration to stems and leaves, delaying seed germination, impeding plant growth, inhibiting photosynthesis, interfering with nutrient metabolism, causing oxidative damage, and producing genotoxicity. We further highlighted the alterations of soil structure and function by MPs, as well as their self and load toxicity, as potential mechanisms that threaten plants. Finally, this paper provided several preventive strategies to mitigate soil MPs pollution and presented research gaps in the biogeochemical behavior of MPs in soil-plant systems. Meanwhile, we recommended that methods for the quantitative detection of MPs accumulated in plant tissues should be explored and established as soon as possible. This review will improve the understanding of the environmental behavior of MPs in soil-plant systems and provide a theoretical reference to better assess the ecological risk of MPs.

A Critical Review of the Performance and Soil Biodegradability Profiles of Biobased Natural and Chemically Synthesized Polymers in Industrial Applications

This review explores biobased polymers for industrial applications, their end fate, and most importantly, origin and key aspects enabling soil biodegradation. The physicochemical properties of biobased synthetic and natural polymers and the primary factors governing degradation are explored. Current and future biobased systems and factors allowing for equivalent comparisons of degradation and possible sources for engineering improved biodegradation are reviewed. Factors impacting ultraviolet (UV) stability of biopolymers have been described including methods to enhance photoresistance and impact on biodegradation. It discusses end-fate of biopolymers in soil and impact of residues on soil health. A limited number of studies examine side effects (e.g., microbial toxicity) from soil biodegradation of composites and biopolymers. Currently available standards for biodegradation and composting have been described with limitations and scope for improvements. Finally, design considerations and implications for sustainable polymers used, under consideration, and to be considered within the context of a rational biodegradable strategy are elaborated.

Environmental behaviors of microplastics in aquatic systems: A systematic review on degradation, adsorption, toxicity and biofilm under aging conditions

Microplastics (MPs, < 5 mm) in the environment have attracted worldwide attention due to their wide distribution and difficulty in handling. Aging processes such as UV irradiation, biodegradation, physical abrasion and chemical oxidation can affect the environmental behavior of MPs. This review article summarizes different aging processes of MPs and subsequent effects on the adsorption of pollutants, the leaching of additives, and the toxicity of MPs. In addition, the formation process of biofilm on the surface of MPs and the interactions between biofilm and aged MPs are revealed. MPs can accumulate different environmental pollutants (organic pollutants, heavy metals, microorganisms, etc.) through surface adsorption, pore filling and distribution. Moreover, the aging of MPs affects their adsorption performance toward these pollutants due to a series of changes in their specific surface area and oxygen-containing functional groups. The release of some toxic additives such as phthalates after aging can enhance the toxic effects of MPs. Aging also changes the shape and size of MPs, which can affect the eating habits of the organisms and further increase the potential toxicity of MPs. This article conducts a systematical analysis and summary of the environmental behavior and physicochemical properties of MPs as well as the changes due to MPs aging, which helps to better understand the impact of aging on MPs in the environment. Future research on MPs aging should reduce the knowledge gap between laboratory simulation and actual conditions and increase the environmental relevance.

Integrated microbiology and metabolomics analysis reveal plastic mulch film residue affects soil microorganisms and their metabolic functions

Research on microplastic pollution of terrestrial soils is catching up with the aquatic environment, especially agricultural soil systems. Plastic residues have caused various environmental problems in mulch film extensively used agricultural areas. However, studies focusing specifically on the potential influence of mulch film residues on the metabolic cycle of soil systems have yet to be conducted. Here, high-throughput sequencing combined with metabolomics were first used to study the effects of residual mulch on soil microbial communities and related metabolic functions. Plastic film treatment did not significantly affect soil physicochemical properties including pH, organic matter and nitrogen, etc in short term. However, it did significantly changed overall community structure of soil bacteria, and interfered with complexity of soil bacterial symbiosis networks; exposure time and concentration of residues were particularly important factors affecting community structure. Furthermore, metabolomics analysis showed that film residue significantly changed soil metabolite spectrum, and interfered with basic carbon and lipid metabolism, and also affected basic cellular processes such as membrane transport and, in particular, interfered with the biosynthesis of secondary metabolites, as well as, biodegradation and metabolism of xenobiotics. Additionally, through linear discriminant and collinear analysis, some new potential microplastic degrading bacteria including Nitrospira, Nocardioidaceae and Pseudonocardiaceae have been excavated.

Microplastics as an aquatic pollutant affect gut microbiota within aquatic animals

The adverse impact of microplastics (MPs) on gut microbiota within aquatic animals depends on the overall effect of chemicals and biofilm of MPs. Thus, it is ideal to fully understand the influences that arise from each or even all of these characteristics, which should give us a whole picture of consequences that are brought by MPs. Harmful effects of MPs on gut microbiota within aquatic organisms start from the ingestion of MPs by aquatic organisms. According to this, the present review will discuss the ingestion of MPs and its following results on gut microbial communities within aquatic animals, in which chemical components, such as plastic polymers, heavy metals and POPs, and the biofilm of MPs would be involved. This review firstly analyzed the impacts of MPs on aquatic organisms in detail about its chemical components and biofilm based on previous relevant studies. At last, the significance of field studies, functional studies and complex dynamics of gut microbial ecology in the future research of MPs affecting gut microbiota is discussed.

On the degradation of (micro)plastics: Degradation methods, influencing factors, environmental impacts

Plastics and microplastics are difficult to degrade in the natural environment due to their hydrophobicity, the presence of stable covalent bonds and functional groups that are not susceptible to attack. In nature, microplastics are more likely to attract other substances due to their large specific surface area, which further prevents degradation from occurring. Some of these substances are toxic and harmful, and can be spread to various organisms through the food chain along with the microplastics to cause harm to them. Degradation is an effective way to eliminate plastic pollution, and a comprehensive understanding of the methods and mechanisms of plastic degradation is necessary, because it is the result of synergistic effects of several degradation methods, both in nature and in consideration of future engineering applications. The authors firstly summarize the degradation methods of (micro)plastics; secondly, review the influence of intrinsic properties and environmental factors during the degradation process; finally, discuss the environmental impact of the degradation products of (micro)plastics. It is evident that the degradation of (micro)plastics still has many challenges to overcome, and there are no mature and effective methods that can be applied in engineering practice or widely used in nature. Therefore, there is an urgent need for research on the degradation of (micro)plastics.

How to Build a Microplastics-Free Environment: Strategies for Microplastics Degradation and Plastics Recycling

Microplastics are an emergent yet critical issue for the environment because of high degradation resistance and bioaccumulation. Unfortunately, the current technologies to remove, recycle, or degrade microplastics are insufficient for complete elimination. In addition, the fragmentation and degradation of mismanaged plastic wastes in environment have recently been identified as a significant source of microplastics. Thus, the developments of effective microplastics removal methods, as well as, plastics recycling strategies are crucial to build a microplastics-free environment. Herein, this review comprehensively summarizes the current technologies for eliminating microplastics from the environment and highlights two key aspects to achieve this goal: 1) Catalytic degradation of microplastics into environmentally friendly organics (carbon dioxide and water); 2) catalytic recycling and upcycling plastic wastes into monomers, fuels, and valorized chemicals. The mechanisms, catalysts, feasibility, and challenges of these methods are also discussed. Novel catalytic methods such as, photocatalysis, advanced oxidation process, and biotechnology are promising and eco-friendly candidates to transform microplastics and plastic wastes into environmentally benign and valuable products. In the future, more effort is encouraged to develop eco-friendly methods for the catalytic conversion of plastics into valuable products with high efficiency, high product selectivity, and low cost under mild conditions.

Combined effects of degradable film fragments and micro/nanoplastics on growth of wheat seedling and rhizosphere microbes

Multiple sources of microplastics (MPs) in farmland could result in the changing of microbial community and the plant growth. Most studies of MPs in agricultural system have focused on the effects of single types of MPs on growth of plants, while neglect interactions between multiple types of MPs. In this study a pot-experiment was conducted to investigate the effects of multiple types of MPs, including polystyrene beads: M1, 5 μm, M2, 70 nm and degradable mulching film (DMF) fragments on growth of wheat seedlings and associated rhizosphere microbial community. CKD (adding DMF) significantly reduced plant height and base diameter of wheat seedlings. DMF in combination with M2, significantly increased plant height and aboveground biomass, but decreased the base diameter. Actinobacteria was the dominant taxa in the rhizosphere bacterial community in various treatments. PCoA analysis showed that the bacterial composition in M2HD (100 mg kg^-1 M² with DMF) was significantly different from that of CKD and M2LD (10 mg kg^-1 M² with DMF). At the level of genera, the dominant fungi in CKD and M2LD were in the genus Fusarium, which is the cause of wheat fusarium blight and Alternaria, which results in decreased base diameter. In CK (control group) and M2HD, Blastobotrys exhibited the greatest abundance, which assisted wheat seedlings in resisting Verticillium disease. Cluster and PCoA analysis showed the fungal composition in CKD was significantly different from CK, M2LD and M2HD. These findings suggest MPs potentially have selective effects on pathogens that affect growth of plants and potentially safety of the food.

Polyethylene microplastics cooperate with Helicobacter pylori to promote gastric injury and inflammation in mice

Microplastics provide stable habitats for the colonization and survival of pathogenic microorganisms, and cooperate with microorganisms to pose a potential threat to human health. In this study, polyethylene microplastics (PE-MPs) in artificial gastric juice time-dependently decomposed and broke into small-diameter PE-MP fragments that were more stable than those in an aqueous solution. Helicobacter pylori adhered to the surfaces of the PE-MPs to form a biofilm. The gastric tissues of mice treated with PE-MPs first and mixture of PE-MPs and H. pylori were positive for H. pylori infection in the 10th and 14th weeks after treatment, whereas those infected with H. pylori first and H. pylori alone were positive only in the 14th week after treatment. PE-MPs were visible in the gastric, intestinal, and liver tissues of mice treated with PE-MPs. The average diameter of the PE-MP fragments in the liver was greater than those of fragments that entered the gastric or intestinal tissues, and the average diameter of PE-MPs in the PE-MPs only-treated mice was significantly smaller than those of PE-MPs entering the intestinal tissues of the other groups. The infiltration of inflammatory cells was most serious in the mice treated with the mixture of PE-MPs and H. pylori, or with PE-MPs first and then H. pylori. Of all the groups, the gastric organ index and MPO, IL6, and TNF-α levels were highest in the mice treated with the mixture of PE-MPs and H. pylori. These results indicate that the interaction between PE-MPs and H. pylori contributed to the rapid bacterial colonization of gastric mucosal epithelial cells, improved the efficiency of PE-MP entry into tissues, and promoted gastric injury and inflammation in mice. These findings suggest that microplastics may provide a stable habitat for H. pylori, and act synergistically with H. pylori to pose a potential threat to human health.

Photocatalytic and biological technologies for elimination of microplastics in water: Current status

Water pollution by microplastics (MPs) has emerged as a significant environmental and public health concern. Several conventional technologies in drinking water and wastewater treatment facilities are capable of capturing a substantial portion of microplastics from surface water; however, only limited methods are available for actual destruction of microplastics. Rate of success is highly variable, and actual mechanisms which result in MP destruction are only partly known. Photocatalysis and microbial degradation technologies show promise at laboratory scale for the transformation of microplastics to water-soluble hydrocarbons, carbon dioxide and, in limited cases, useful fuels. Both photocatalytic and microbial technologies offer the potential for long-term water security and ecological stability and deserve further attention by scientists. Additional research is necessary, however, in identifying more effective semiconductors for photocatalysis, and optimal effective microbial consortia and environmental conditions to optimize microplastic biodegradation. Many more polymer types beyond polyethylene must be studied for degradation, and laboratory-scale research must be expanded to field-scale. This paper provides a comprehensive overview of processes and mechanisms for removing MPs by photocatalysis and microbial technologies. It provides useful data for research dedicated to improved removal of MPs from surface waters.

Microplastic Pollution: An Emerging Threat to Terrestrial Plants and Insights into Its Remediation Strategies

Microplastics (MPs) are ubiquitous and constitute a global hazard to the environment because of their robustness, resilience, and long-term presence in the ecosystem. For now, the majority of research has primarily focused on marine and freshwater ecosystems, with just a small amount of attention towards the terrestrial ecosystems. Although terrestrial ecosystems are recognized as the origins and routes for MPs to reach the sea, there is a paucity of knowledge about these ecological compartments, which is necessary for conducting effective ecological risk assessments. Moreover, because of their high persistence and widespread usage in agriculture, agribusiness, and allied sectors, the presence of MPs in arable soils is undoubtedly an undeniable and severe concern. Consequently, in the recent decade, the potential risk of MPs in food production, as well as their impact on plant growth and development, has received a great deal of interest. Thus, a thorough understanding of the fate and risks MPs, as well as prospective removal procedures for safe and viable agricultural operations in real-world circumstances, are urgently needed. Therefore, the current review is proposed to highlight the potential sources and interactions of MPs with agroecosystems and plants, along with their remediation strategies.

PET microplastics affect human gut microbiota communities during simulated gastrointestinal digestion, first evidence of plausible polymer biodegradation during human digestion

Microplastics (MPs) are a widely recognized global problem due to their prevalence in natural environments and the food chain. However, the impact of microplastics on human microbiota and their possible biotransformation in the gastrointestinal tract have not been well reported. To evaluate the potential risks of microplastics at the digestive level, completely passing a single dose of polyethylene terephthalate (PET) through the gastrointestinal tract was simulated by combining a harmonized static model and the dynamic gastrointestinal simgi model, which recreates the different regions of the digestive tract in physiological conditions. PET MPs started several biotransformations in the gastrointestinal tract and, at the colon, appeared to be structurally different from the original particles. We report that the feeding with microplastics alters human microbial colonic community composition and hypothesize that some members of the colonic microbiota could adhere to MPs surface promoting the formation of biofilms. The work presented here indicates that microplastics are indeed capable of digestive-level health effects. Considering this evidence and the increasing exposure to microplastics in consumer foods and beverages, the impact of plastics on the functionality of the gut microbiome and their potential biodegradation through digestion and intestinal bacteria merits critical investigation.

Size-dependent effects of polystyrene nanoplastics on autophagy response in human umbilical vein endothelial cells

Ubiquitous nanoplastics (NPs) increase exposure risks to humans through the food chain and/or other ways. However, huge knowledge gaps exist regarding the fate and adverse impact of NPs on the human cardiovascular system. Autophagy is an important catabolic pathway that disposes of cytoplasmic waste through the lysosomes. In this study, we pursued to determine the interaction and autophagy effect of polystyrene nanoplastics (PS-NPs) (100 and 500 nm in size) on human umbilical vein endothelial cells (HUVECs). The results showed both sizes of PS-NPs interacted with almost all the treated HUVECs in a time- and concentration-dependent manner, and 500 nm PS-NPs were only bound to the surface of cell membranes, whereas 100 nm PS-NPs were taken up by HUVECs and aggregated in the cytoplasm. Furthermore, exposure to 25 μg/mL of 500 nm PS-NPs for 48 h significantly increased lactate dehydrogenase release from HUVECs, while internalized 100 nm PS-NPs not only caused cell membrane damage, but also induced autophagy initiation and autophagosome formation. By a mCherry-GFP-LC3 lentivirus infection assay, we also demonstrated that autophagic flux level was impaired in response to 100 nm PS-NPs. Herein, our results provide new insight into the size-dependent internalization and autophagy response to PS-NPs in HUVECs.

Environmental Impacts of Microplastics and Nanoplastics: A Current Overview

The increasing distribution of miniaturized plastic particles, viz. microplastics (100 nm–5 mm) and nanoplastics (less than 100 nm), across the various ecosystems is currently a subject of major environmental concern. Exacerbating these concerns is the fact that microplastics and nanoplastics (MNPs) display different properties from their corresponding bulk materials; thus, not much is understood about their full biological and ecological implications. Currently, there is evidence to prove that these miniaturized plastic particles release toxic plastic additives and can adsorb various chemicals, thereby serving as sinks for various poisonous compounds, enhancing their bioavailability, toxicity, and transportation. Furthermore, there is a potential danger for the trophic transfer of MNPs to humans and other higher animals, after being ingested by lower organisms. Thus, this paper critically analyzes our current knowledge with regard to the environmental impacts of MNPs. In this regard, the properties, sources, and damaging effects of MNPs on different habitats, particularly on the biotic components, were elucidated. Similarly, the consequent detrimental effects of these particles on humans as well as the current and future efforts at mitigating these detrimental effects were discussed. Finally, the self-cleaning efforts of the planet via a range of saprophytic organisms on these synthetic particles were also highlighted.

A review on marine plastisphere: biodiversity, formation, and role in degradation

The pollution of plastic waste has become an increasingly serious environmental crisis. Recently, plastic has been detected in various kinds of environments, even in human tissues, which is an increasing threat to the ecosystems and humans. In the ocean, the plastic waste is eventually fragmentized into microplastics (MPs) under the disruption of physical and chemical processes. MPs are colonized by microbial communities such as fungi, diatoms, and bacteria, which form biofilms on the surface of the plastic called “plastisphere”. In this review, we summarize the studies related to microorganisms in the plastisphere in recent years and describe the microbial species in the plastisphere, mainly including bacteria, fungi, and autotrophs. Secondly, we explore the interactions between MPs and the plastisphere. The depth of MPs in the ocean and the nutrients in the surrounding seawater can have a great impact on the community structure of microorganisms in the plastisphere. Finally, we discuss the types of MP-degrading bacteria in the ocean, and use the “seed bank” theory to speculate on the potential sources of MP-degrading microorganisms. Challenges and future research prospects are also discussed.

Challenges and opportunities in bioremediation of micro-nano plastics: A review

Rising level of micro-nano plastics (MNPs) in the natural ecosystem adversely impact the health of the environment and living organisms globally. MNPs enter in to the agro-ecosystem, flora and fauna, and human body via trophic transfer, ingestion and inhalation, resulting impediment in blood vessel, infertility, and abnormal behaviors. Therefore, it becomes indispensable to apply a novel approach to remediate MNPs from natural environment. Amongst the several prevailing technologies of MNPs remediation, microbial remediation is considered as greener technology. Microbial degradation of plastics is typically influenced by several biotic as well as abiotic factors, such as enzymatic mechanisms, substrates and co-substrates concentration, temperature, pH, oxidative stress, etc. Therefore, it is pivotal to recognize the key pathways adopted by microbes to utilize plastic fragments as a sole carbon source for the growth and development. In this context, this review critically discussed the role of various microbes and their enzymatic mechanisms involved in biodegradation of MNPs in wastewater (WW) stream, municipal sludge, municipal solid waste (MSW), and composting starting with biological and toxicological impacts of MNPs. Moreover, this review comprehensively discussed the deployment of various MNPs remediation technologies, such as enzymatic, advanced molecular, and bio-membrane technologies in fostering the bioremediation of MNPs from various environmental compartments along with their pros and cons and prospects for future research.

A minireview on the bioremediative potential of microbial enzymes as solution to emerging microplastic pollution

Accumulating plastics in the biosphere implicates adverse effects, raising serious concern among scientists worldwide. Plastic waste in nature disintegrates into microplastics. Because of their minute appearance, at a scale of <5 mm, microplastics easily penetrate different pristine water bodies and terrestrial niches, posing detrimental effects on flora and fauna. The potential bioremediative application of microbial enzymes is a sustainable solution for the degradation of microplastics. Studies have reported a plethora of bacterial and fungal species that can degrade synthetic plastics by excreting plastic-degrading enzymes. Identified microbial enzymes, such as IsPETase and IsMHETase from Ideonella sakaiensis 201-F6 and Thermobifida fusca cutinase (Tfc), are able to depolymerize plastic polymer chains producing ecologically harmless molecules like carbon dioxide and water. However, thermal stability and pH sensitivity are among the biochemical limitations of the plastic-degrading enzymes that affect their overall catalytic activities. The application of biotechnological approaches improves enzyme action and production. Protein-based engineering yields enzyme variants with higher enzymatic activity and temperature-stable properties, while site-directed mutagenesis using the Escherichia coli model system expresses mutant thermostable enzymes. Furthermore, microalgal chassis is a promising model system for "green" microplastic biodegradation. Hence, the bioremediative properties of microbial enzymes are genuinely encouraging for the biodegradation of synthetic microplastic polymers.

A review on microplastic pollution in the mangrove wetlands and microbial strategies for its remediation

Mangroves are one of the most productive ecosystems in the world harboring huge biological diversity. The prime ecological roles of mangroves are prevention of coastal erosion and shoreline protection. Mangroves face varying degrees of threats due to overexploitation, conversion of mangrove habitats for agriculture, settlement and industrial purposes, illegal encroachment, global warming, sea-level rise, El Nino, and pollution. Among them, microplastic (MP) pollution is a major concern threatening not only the mangroves per se but also the rich biodiversity that it shelters. In general, the microbial communities which are paramount to nutrient recycling and ecological dynamics undergo substantial changes upon MP exposure. If the MP pollution in the mangrove habitats continues unabated in the coming decades, there may be serious consequences on the already threatened mangrove ecosystems and the coastal communities. This review article attempts to consolidate MP pollution of mangrove wetlands, its impact on mangroves and associated microbiota, and the microbial solution for its remediation as a sustainable strategy.

In situ Prokaryotic and Eukaryotic Communities on Microplastic Particles in a Small Headwater Stream in Germany

The ubiquitous use of plastic products in our daily life is often accompanied by improper disposal. The first interactions of plastics with organisms in the environment occur by overgrowth or biofilm formation on the particle surface, which can facilitate the ingestion by animals. In order to elucidate the colonization of plastic particles by prokaryotic and eukaryotic microorganisms in situ, we investigated microbial communities in biofilms on four different polymer types and on mineral particles in a small headwater stream 500 m downstream of a wastewater treatment plant in Germany. Microplastic and mineral particles were exposed to the free-flowing water for 4 weeks in spring and in summer. The microbial composition of the developing biofilm was analyzed by 16S and 18S amplicon sequencing. Despite the expected seasonal differences in the microbial composition of pro- and eukaryotic communities, we repeatedly observed polymer type-specific differentiation in both seasons. The order of polymer type-specific prokaryotic and eukaryotic community distances calculated by Robust Aitchison principal component analysis (PCA) was the same in spring and summer samples. However, the magnitude of the distance differed considerably between polymer types. Prokaryotic communities on polyethylene particles exhibited the most considerable difference to other particles in summer, while eukaryotic communities on polypropylene particles showed the most considerable difference to other spring samples. The most contributing bacterial taxa to the polyethylene-specific differentiation belong to the Planctomycetales, Saccharimonadales, Bryobacterales, uncultured Acidiomicrobia, and Gemmatimonadales. The most remarkable differences in eukaryotic microorganism abundances could be observed in several distinct groups of Ciliophora (ciliates) and Chlorophytes (green algae). Prediction of community functions from taxonomic abundances revealed differences between spring and summer, and – to a lesser extent – also between polymer types and mineral surfaces. Our results show that different microplastic particles were colonized by different biofilm communities. These findings may be used for advanced experimental designs to investigate the role of microorganisms on the fate of microplastic particles in freshwater ecosystems.

An urgent call to think globally and act locally on landfill disposable plastics under and after covid-19 pandemic: Pollution prevention and technological (Bio) remediation solutions

Landfilling and illegal waste disposal have risen to deal with the COVID-19 potentially infectious waste, particularly in developing countries, which aggravates plastic pollution and inherent environmental threats to human and animal health. It is estimated that 3.5 million metric tonnes of masks (equivalent to 601 TIR containers) have been landfilled worldwide in the first year, with the potential to increase global plastic municipal solid waste by 3.5%, alter biogas composition, and release 2.3 × 1021 microplastics to leachates or adjacent environments, in the coming years. This paper reviews the challenges raised in the pandemic scenario on landfills and discusses the potential environmental and health implications that might drive us apart from the 2030 U.N. sustainable goals. Also, it highlights some innovative technologies to improve waste management (from collection to disposal, waste reduction, sterilization) and mitigates plastic leakage (emission control approaches, application of biotechnological and monitoring/computational tools) that can pave the way to environmental recovery. COVID-19 will eventually subside, but if no action is taken in the short-term towards effective plastic policies, replacement of plastics for sustainable alternatives (e.g., biobased plastics), improvement of waste management streams (prioritising flexible and decentralized approaches), and a greater awareness and responsibility of the general public, stakeholders, industries; we will soon reach a tipping-point in natural environments worldwide.

Recent endeavors in microbial remediation of micro- and nanoplastics

Petrochemical plastics are frequently utilized in our daily lives for various purposes such as packaging and transportation, but their burden on the environment is considered one of the most man-made pollution crises. These pollutants are slowly fragmented in the environment into microplastics and nanoplastics by consolidated actions of abiotic and biotic factors. Microplastics and nanoplastics can easily be dispersed in the atmosphere and be harmful to all kinds of life. As a result, the remediation of micro- and nanoplastics has recently received a tremendous research impetus in the realm of an ecologically benign approach, notably microbial-based remediation. Thus, the current article looks at the formation, properties, analysis, and biological effects of micro- and nanoplastics. The content is then streamlined towards a comprehensive discussion on microbial-mediated degradation of microplastics and nanoplastics, with an emphasis on front-line bacteria and enzymes, as well as remediation mechanisms. Further, technologies for the removal of microplastics and nanoplastics from the environment are presented for possible remedial considerations. An attempt is also made to highlight the practical snags of microbial plastic degradation while aiming to alleviate the environmental burden of plastic waste.

Recent advances on ecological effects of microplastics on soil environment

The mass production and wide application of plastics and their derivatives have led to the release of a large number of discarded plastic products into the natural environment, where they continue to accumulate due to their low recycling rate and long durability. These large pieces of plastic will gradually break into microplastics (<5 mm), which are highly persistent organic pollutants and attract worldwide attention due to their small particle size and potential threats to the ecosystem. Compared with the aquatic system, terrestrial systems such as soils, as sinks for microplastics, are more susceptible to plastic pollution. In this article, we comprehensively summarized the occurrence and sources of microplastics in terrestrial soil, and reviewed the eco-toxicological effects of microplastics in soil ecosystems, in terms of physical and chemical properties of soil, soil nutrient cycling, soil flora and fauna. The influence of microplastics on soil microbial community, and particularly the microbial community on the surface of microplastics, were examined in detail. The compound effects of microplastics and other pollutants, e.g., heavy metals and antibiotics, were addressed. Future challenges of research on microplastics include development of new techniques and standardization for the extraction and qualitative and quantitative analysis of microplastics in soils, toxic effects of microplastics at microbial or even molecular levels, the contribution of microplastics to antibiotic resistance genes migration, and unraveling microorganisms for the degradation of microplastics. This work provides as a better understanding of the occurrence, distribution and potential ecological risks of microplastics in terrestrial soil ecosystems.

Biochemical features and early adhesion of marine Candida parapsilosis strains on high-density polyethylene

AIMS

Plastic debris are constantly released into oceans where, due to weathering processes, they suffer fragmentation into micro- and nanoplastics. Diverse microbes often colonize these persisting fragments, contributing to their degradation. However, there are scarce reports regarding the biofilm formation of eukaryotic decomposing microorganisms on plastics. Here, we evaluated five yeast isolates from deep-sea sediment for catabolic properties and early adhesion ability on high-density polyethylene (HDPE).

METHODS AND RESULTS

We assessed yeast catabolic features and adhesion ability on HDPE fragments subjected to abiotic weathering. Adhered cells were evaluated through Crystal Violet Assay, Scanning Electron Microscopy, Atomic Force Microscopy and Infrared Spectroscopy. Isolates were identified as Candida parapsilosis and exhibited wide catabolic capacity. Two isolates showed high adhesion ability on HDPE, consistently higher than the reference C. parapsilosis strain, despite an increase in fragment roughness due to weathering. Isolate Y5 displayed the most efficient colonization, with production of polysaccharides and lipids after 48 h of incubation.

CONCLUSION

This work provides insights on catabolic metabolism and initial yeast-HDPE interactions of marine C. parapsilosis strains.

SIGNIFICANCE AND IMPACT OF THE STUDY

Our findings represent an essential contribution to the characterization of early interactions between deep-sea undescribed yeast strains and plastic pollutants found in oceans.

Isolation and identification of low-density polyethylene degrading novel bacterial strains

Plastics are usually made up of low-density polyethylene (LDPE) that serve as the environmental nuisance. The recalcitrant nature of plastics is a huge concern, whereas the increasing demand has made it difficult to handle the plastic waste that eventually leads to plastic pollution. In recent years, due to increasing demand and high pressure for its safe disposal, plastic biodegradation has gained a lot of attention. In the current study, four bacterial strains were isolated from the solid-waste dumpsites of Faisalabad, Pakistan, using enrichment culture technique. The isolated bacterial strains were capable of growing on media having polystyrene as the sole carbon source. Based on 16S rRNA gene sequencing and phylogenetic analysis of the isolated strains Serratia sp., Stenotrophomonas sp. and Pseudomonas sp. were identified as the potential strains for the biodegradation of LDPE. Serratia sp. resulted in 40% weight loss of the LDPE plastic pieces after 150 days of treatment. Stenotrophomonas sp. and Pseudomonas species resulted in 32 and 21% weight loss of the treated piece of plastics (LDPE), respectively. Polyethylene pieces were characterized by Fourier-transform infrared spectroscopy (FTIR) analysis before and after biodegradation. The FTIR spectra indicated that the isolated bacterial strains have a good potential to degrade LDPE. Future studies are required to investigate the bacterial genetic makeup, mechanisms of LDPE biodegradation and the factors that can enhance the biodegradable characteristics of these indigenously isolated bacterial strains.

Plastic-Degrading Potential across the Global Microbiome Correlates with Recent Pollution Trends

Biodegradation is a plausible route toward sustainable management of the millions of tons of plastic waste that have accumulated in terrestrial and marine environments. However, the global diversity of plastic-degrading enzymes remains poorly understood. Taking advantage of global environmental DNA sampling projects, here we constructed hidden Markov models from experimentally verified enzymes and mined ocean and soil metagenomes to assess the global potential of microorganisms to degrade plastics. By controlling for false positives using gut microbiome data, we compiled a catalogue of over 30,000 nonredundant enzyme homologues with the potential to degrade 10 different plastic types. While differences between the ocean and soil microbiomes likely reflect the base compositions of these environments, we find that ocean enzyme abundance increases with depth as a response to plastic pollution and not merely taxonomic composition. By obtaining further pollution measurements, we observed that the abundance of the uncovered enzymes in both ocean and soil habitats significantly correlates with marine and country-specific plastic pollution trends. Our study thus uncovers the earth microbiome's potential to degrade plastics, providing evidence of a measurable effect of plastic pollution on the global microbial ecology as well as a useful resource for further applied research. IMPORTANCE Utilization of synthetic biology approaches to enhance current plastic degradation processes is of crucial importance, as natural plastic degradation processes are very slow. For instance, the predicted lifetime of a polyethylene terephthalate (PET) bottle under ambient conditions ranges from 16 to 48 years. Moreover, although there is still unexplored diversity in microbial communities, synergistic degradation of plastics by microorganisms holds great potential to revolutionize the management of global plastic waste. To this end, the methods and data on novel plastic-degrading enzymes presented here can help researchers by (i) providing further information about the taxonomic diversity of such enzymes as well as understanding of the mechanisms and steps involved in the biological breakdown of plastics, (ii) pointing toward the areas with increased availability of novel enzymes, and (iii) giving a basis for further application in industrial plastic waste biodegradation. Importantly, our findings provide evidence of a measurable effect of plastic pollution on the global microbial ecology.

Environmental emission, fate and transformation of microplastics in biotic and abiotic compartments: Global status, recent advances and future perspectives

The intensive use and wide-ranging application of plastic- and plastic-derived products have resulted in alarming levels of plastic pollution in different environmental compartments worldwide. As a result of various biogeochemical mechanisms, this plastic litter is converted into small, ubiquitous and persistent fragments called microplastics (<5 mm), which are of significant and increasing concern to the scientific community. Microplastics have spread across the globe and now exist in virtually all environmental compartments (the soil, atmosphere, and water). Although these compartments are often considered to be independent environments, in reality, they are very closely linked. Ample research has been done on microplastics, but there are still questions and knowledge gaps regarding the emission, occurrence, distribution, detection, environmental fate and transport of MPs in different environmental compartments. The current article is intended to provide a systematic overview of MP emissions, pollution conditions, sampling and analytical approaches, transport, fates and transformation mechanisms in different environmental compartments. It also identifies research gaps and future research directions and perspectives.

Insight into the Interaction Between Microplastics and Microorganisms Based on a Bibliometric and Visualized Analysis

Microplastics are abundant in the environment and have been proven to affect ecosystems and human health. Microorganisms play essential roles in the ecological fate of microplastics pollution, potentially yielding positive and negative effects. This study reviews the research progress of interaction between microplastics and microorganisms based on a bibliometric and visualized analysis. Publication numbers, subjects, countries, institutions, highly cited papers, and keywords were investigated by statistical analysis. VOSviewer software was applied to visualize the co-occurrence and aggregation of national collaboration, subjects, and keywords. Results revealed trends of rapidly increasing publication output that involved multiple disciplines. Contributing countries and their institutions were also identified in this study. Keywords, co-occurrence network visualization, highly cited papers analysis, and knowledge-based mining were all used to give insight into microorganisms or microbiota related to microplastics pollution, and the potential impacts that microplastics biodegradation may cause. In the future, research efforts need to focus on the following areas: microbial degradation processes and mechanisms, assessment of ecological microplastics risks, and potential effects of microplastics bioaccumulation and human exposure. This study provides a holistic view of ongoing microplastics and related microbial research, which may be useful for future microplastics biodegradation studies.

Questioning the suitability of available microplastics models for risk assessment - A critical review

The rise of microplastic (MP) pollution in the environment has been bolstering concerns regarding MPs' unknown environmental fate, transport, and potential toxicity toward living forms. However, the use of real environmental plastics for risk assessment is often hindered due to technical and practical challenges such as plastics' heterogeneity and their wide size distribution in the environment. To overcome this issue, most available data in the field is generated using plastic models as surrogates for environmental samples. In this critical review, we describe the gaps in risk assessments drawn from these plastic models. Specifically, we compare physicochemical properties of real environmental plastic particles to synthesized polymeric micro-beads, one of the most commonly used plastic models in current literature. Several surface and bulk characteristics including size, surface chemistry, polymer type, and morphology are shown to not only be inherently different between environmental MP's and synthesized micro-beads, but also drive behavior in fate, transport, and toxicity assays. We highlight the importance of expressing real-world physicochemical characteristics in representative MP models and outline how current state-of-the-art models are limited in this regard. To address this issue, we suggest future areas of research such as combinations of mechanical, photochemical, and thermal degradation processes to simulate real-world weathering, all in an effort to increase realism of plastic modeling and allow more robust and reliable environmental MP risk assessment in the future.

Microplastic degradation methods and corresponding degradation mechanism: Research status and future perspectives

Microplastics (MPs) pollution has become a global environmental concern because of their severe threat to biota. However, limited studies on the elimination of MPs pollution were reported. The conventional treatment methods were not suitable for MPs owing to their smaller size than plastic items. Hence many methods for MPs treatment have been examined. This review summarized the recently reported MPs degradation methods including AOPs (direct photodegradation, photocatalytic oxidation, and electrochemical oxidation) and biodegradation, corresponding degradation mechanism as well as current development state. The characteristics and limitations of each technique were discussed in detail. We found that all of them achieved almost satisfying degradation performance of MPs, but most of them exhibited that MPs can only be degraded partially into useful products or even CO₂ and H₂O under lab conditions. Given these, some recommendations for future research directions were proposed based on the knowledge gaps in these reported literatures. The aim of this review is to give a comprehensive introduction of several MPs degradation methods and acquaint the readers with the current research status of MPs degradation.

Systematical review of interactions between microplastics and microorganisms in the soil environment

Terrestrial ecosystems are widely contaminated by microplastics due to extensive usage and poor handling of plastic materials, but the subsequent fate and remediate strategy of these pollutants are far from fully understood. In soil environments, microplastics pose a potential threat to the survival, growth, and reproduction of soil microbiota that in turn threaten the biodiversity, function, and services of terrestrial ecosystems. Meanwhile, microorganisms are sensitive to microplastics due to the adaptability to changes in substrates and soil properties. Through the metabolic and mineralization processes, microorganisms are also crucial participator to the plastic biodegradation. In this review, we present current knowledges and research results of interactions between microplastics and microorganisms (both fungi and bacteria) in soil environments and mainly discuss the following: (1) effects of microplastics on microbial habitats via changes in soil physical, chemical, and biological properties; (2) effects of microplastics on soil microbial communities and functions; and (3) soil microbial-mediated plastic degradation with the likely mechanisms and potential remediation strategies. We aim to analyze the mechanisms driving these interactions and subsequent ecological effects, propose future directives for the study of microplastic in soils, and provide valuable information on the plastic bioremediation in contaminated soils.

Microplastic degradation as a sustainable concurrent approach for producing biofuel and obliterating hazardous environmental effects: A state-of-the-art review

As plastics have been omnipresent in society ever since their introduction in 1907, global plastic production has ballooned in the 20th century or the Plasticene Era (Plastic Age). After their useful life span, they deliberately or accidentally, are disposed of in the environment. Influenced by different factors, plastics undergo fragmentation into microplastics (MPs) and present hazardous risks in all life forms including humans. Obliterating MPs from the environment has been a global challenge for the attainment of sustainable development goals (SDGs). This review aims to present MP degradation routes with a great focus on the thermodegradation and biodegradation routes as sustainable routes of MP degradation. These routes can achieve the reduction and obliteration of MPs in the environment, thus reducing their hazardous effects. Moreover, the thermodegradation of MPs can produce fuels that help solve the dilemma of energy security. Overall, continued research and development are still needed, however, these novel approaches and the increased awareness of the microplastics' hazards give us hope that we can achieve sustainable development in the near future.

Ecological risks in a 'plastic' world: A threat to biological diversity?

Microplastics pollution is predicted to increase in the coming decades, raising concerns about its effects on living organisms. Although the effects of microplastics on individual organisms have been extensively studied, the effects on communities, biological diversity, and ecosystems remain underexplored. This paper reviews the published literature concerning how microplastics affect communities, biological diversity, and ecosystem processes. Microplastics increase the abundance of some taxa but decrease the abundance of some other taxa, indicating trade-offs among taxa and altered microbial community composition in both the natural environment and animals' gut. The alteration of community composition by microplastics is highly conserved across taxonomic ranks, while the alpha diversity of microbiota is often reduced or increased, depending on the microplastics dose and environmental conditions, suggesting potential threats to biodiversity. Biogeochemical cycles, greenhouse gas fluxes, and atmospheric chemistry, can also be altered by microplastics pollution. These findings suggest that microplastics may impact the U.N. Sustainability Development Goals (SDGs) to improve atmospheric, soil, and water quality and sustaining biodiversity.

Microplastic pollution in aquatic environments with special emphasis on riverine systems: Current understanding and way forward

Microplastics (MPs) are emerging as a severe threat in our environment. Their diverse existence in marine environments is being researched globally and thus a widely known fact; however, their presence in the freshwater counterpart has gained attention lately only. Riverine systems, the most critical freshwater resources serve as an essential link between terrestrial and marine environments and their contamination with MPs is going to create severe environmental issues. Because of their small size and unique morphology, these polymers can exhibit variable toxicity to the interacting biota and alter their habitat properties; thus, causing serious impacts on the environment and health of living beings, including humans. These microplastics can also interact with pollutants like heavy metals and organic pollutants, which further augment their harming potential. Inefficient and poor plastic waste disposal practices play an important role in the generation of microplastic pollutants. In the present COVID 19 pandemics, the excessive use of plastic to contain the spread of infection has further added the plastic load in the environment which will eventually lead to the generation of microplastic particles. Also, a significant amount of microplastic pollutants in riverine systems are delivered through wastewater treatment plant effluents. These trade-offs create a distress situation in the environment. The present study connects these key issues for a better understanding of the diverse existence of microplastic pollutants, their sources, and fate, with a special emphasis on riverine systems. A critical appraisal of the knowledge gaps and proposal of suitable solutions through this review might open up avenues for further research and effective management of the microplastics in aquatic environments.

Microplastics: A Review of Methodology for Sampling and Characterizing Environmental and Biological Samples

In response to apparent damaging effects of plastics, especially microplastics, exposure to life, scientists have begun the arduous task of standardizing methods for the sample collection, separation, detection, and identification of microplastic particles. The ability to detect plastics depends upon the type of sample, procedure, instrument, expertise of the examiner, and the exact research question. The wide variability of sample processing and analyses does not lend itself well for cross-comparison of studies. However, with a multitude of procedures, techniques may be used in combination to successfully identify microplastic particles. Our goal in this chapter is not to provide a complete guide on plastic analyses, but to present an overview of the different sample collection, pretreatment, detection, and identification methodologies used for microplastic samples located in environmental and biological samples and to review advantages and limitations of each strategy.

Transport and fate of microplastics in constructed wetlands: A microcosm study

Constructed wetlands (CWs) are commonly used for the treatment of wastewater. However, the removal of microplastics in CWs are poorly understood. In this work, the fate and behavior of microplastics of different shapes (film, fragment, and fiber) and sizes (0.5-1 mm and 2-4 mm) were studied. Results showed that the microplastic removal rate was 81.63% in surface flow constructed wetlands (SF-CWs) and 100% in horizontal subsurface flow constructed wetlands (HSF-CWs). Fragments and fibers with 2-4 mm sizes flowed out preferentially from SF-CWs. Retained microplastics accumulated dominantly near the inlet area. Biofilm attachment and physical filtration played an important role in the retention of microplastics. The microplastics' morphological features and the apertures of the substrate related to the transport of microplastics in the substrate. We observed the formation of holes, cracks, and weeny fibers on the surface of the microplastics extracted from the microcosms with a scanning electron microscope (SEM), but we detected no oxidation based on the Fourier transform infrared spectra. Our results suggest that CWs, especially HSF-CWs, are efficient for the removal of microplastic pollution. However, microplastics are persistent in CWs. The potential impacts of microplastics on the function of CWs should be further assessed.