Wastewater treatment plants as a pathway for microplastics: Development of a new approach to sample wastewater-based microplastics

Recent Advances in Micro-/Nanoplastic (MNPs) Removal by Microalgae and Possible Integrated Routes of Energy Recovery

Reliance on plastic has resulted in the widespread occurrence of micro-/nanoplastics (MNPs) in aquatic ecosystems, threatening the food web and whole ecosystem functions. There is a tight interaction between MNPs and microalgae, as dominant living organisms and fundamental constituents at the base of the aquatic food web. Therefore, it is crucial to better understand the mechanisms underlying the interactions between plastic particles and microalgae, as well as the role of microalgae in removing MNPs from aquatic ecosystems. In addition, finding a suitable route for further utilization of MNP-contaminated algal biomass is of great importance. The present review article provides an interdisciplinary approach to elucidate microalgae-MNP interactions and subsequent impacts on microalgal physiology. The degradation of plastic in the environment and differences between micro- and nanoplastics are discussed. The possible toxic effects of MNPs on microalgal growth, photosynthetic activity, and morphology, due to physical or chemical interactions, are evaluated. In addition, the potential role of MNPs in microalgae cultivation and/or harvesting, together with further safe routes for biomass utilization in biofuel production, are suggested. Overall, the current article represents a state-of-the-art overview of MNP generation and the consequences of their accumulation in the environment, providing new insights into microalgae integrated routes of plastic removal and bioenergy production.

Removal and toxic forecast of microplastics treated by electrocoagulation: Influence of dissolved organic matter

In recent years, the break of COVID-19 makes the large use of disposable products, which causes the removal of microplastics become an imperative problem. Electrocoagulation is one of the effective removal technologies, but there is hardly research concentrating on the effect of substrate in the actual water on the microplastics removal with electrocoagulation. As an important role of water bodies, dissolved organic matter (DOM) has a vital and inevitable effect on the efficiency of electrocoagulation. In this study, the effect of DOM in tailwater on microplastics during electrocoagulation is elucidated by comparing the electrocoagulation treatment results between simulated wastewater and tailwater, using parallel factor analysis (PARAFAC), Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectrometer (FTIR) and zeta potential analyzer. Three kinds of microplastic particles (i.e. polypropylene, polyethylene, and polymethyl methacrylate) were added into each of the two kinds of wastewaters to form six electrocoagulation systems. Results show that DOM in tailwater promotes the production of flocs and free radicals during electrocoagulation process. Fe²⁺ and Fe³⁺ are adsorbed on the surface of DOM molecules and combined with •OH form flocs. Although DOM accelerates the production of free radicals and thus promotes the aging of microplastics, flocs with DOM as crystal nucleus can prevent toxic substances and small-sized microplastics from leaching into water again. Therefore, electrocoagulation is preferred to removal microplastics in water with high concentration of DOM. This study provides a significant reference for microplastics removal by electrocoagulation in actual water, and promote the practical application of electrocoagulation for microplastics removal in water treatment.

Comprehensive analysis of spatial distribution of microplastics in Rawal Lake, Pakistan using trawl net and sieve sampling methods

Occurrence of microplastics (MPs) in freshwater environments, particularly reservoir and lakes, is an emerging concern. There are limited studies in Pakistan on microplastic pollution in the lacustrine environments and those that exist do not provide sufficient information on the spatial distribution of MPs in offshore surface water. The aims of this study were to determine microplastic abundance in Rawal Lake, Pakistan and to ascertain if sampling methodology influences microplastic counts. Surface water samples were collected from 10 sites; 5 tributaries, 2 human settlement and 3 fishing and boating areas using two different sampling techniques: 100 μm mesh trawl and 20 L sample through a 45 μm mesh sieve. A significant difference was observed in the abundance of MPs across two methods with the sieve method yielding 2.8 ± 1.44 particles/L and trawl yielding 0.025 ± 0.024 particles/L. Tributaries and boating/fishing area had higher microplastic abundance than the residential area regardless of sampling method. Filaments were the dominant shape of MPs in both type of samples followed by fragments in trawl samples and films in sieved samples. Microbeads were only detected in trawl samples. MPs within size range 0.1-0.9 mm were mostly fragments (82%). MPs were diverse in colors with white/transparent and black MPs common. Polypropylene was the main type of microplastic in Rawal Lake (40-74%). Scanning Electron Microscopy (SEM) of MPs showed cracks, roughness and striations on the particles. Energy Dispersive Spectroscopy (EDS) detected heavy metals (Fe, Cu, Ni, Pb, Zn, Co and Cr) in MPs. Findings suggest that microplastic pollution in Rawal Lake may pose great risk to aquatic and human life through leaching of inherent/adsorbed heavy metals and therefore requires future investigation.

Long-term impacts of polyethylene terephthalate (PET) microplastics in membrane bioreactor

Due to the mass production and daily use of plastic products, the potential toxicity of microplastics to the water environment has attracted worldwide attention. In this work, the effect of typical microplastics (PET) on the performance of activated sludge from membrane bioreactors (MBR) was evaluated. The impacts on biological removal efficiency were unconspicuous with continuous dosing of 60 particles/L. However, further investigations revealed that PET particle accumulation caused adverse impacts on settleability and dewaterability. The SVI value increased from 53.3 ml/g MLSS to 69.9 ml/g MLSS and the CST in the PET reactor increased by 22%. Nevertheless, hydrophobicity was reduced by 49.2%. Mechanism studies exposed that the PET microplastics accumulation improved extracellular polymeric substances (EPS) from 116.96 mg/L to 138.70 mg/L and caused cell membrane damage. The abundance and diversity of microbial community reduced in activated sludge in PET reactor compared with control reactor. These phenomena revealed a possible hypothesis that the microplastic particles increased EPS and cytotoxicity of activated sludge. However, the rate of transmembrane pressure (TMP) build-up was significantly mitigated in PET-MBR compared to that in a control-MBR (1.27 folds), which attributes that physical scour of particles may still alleviate membrane contamination in MBR.

Microplastics in sewage sludge: Distribution, toxicity, identification methods, and engineered technologies

Microplastic pollution is becoming a global challenge due to its long-term accumulation in the environment, causing adverse effects on human health and the ecosystem. Sludge discharged from wastewater treatment plants (WWTPs) plays a critical role as a carrier and primary source of environmental microplastic contamination. A significantly average microplastic variation between 1000 and 301,400 particles kg^-1 has been reported in the sludge samples. In recent years, advanced technologies have been successfully applied to address this issue, including adsorption, advanced oxidation processes (AOPs), and membrane bioreactors (MBRs). Adsorption technologies are essential to utilizing novel adsorbents (e.g., biochar, graphene, zeolites) for effectively removing MPs. Especially, the removal efficiency of polymer microspheres from an aqueous solution by Mg/Zn modified magnetic biochars (Mg/Zn-MBC) was obtained at more than 95%. Also, advanced oxidation processes (AOPs) are widely applied to degrade microplastic contaminants, in which photocatalytic by semiconductors (e.g., TiO₂ and ZnO) is a highly suitable approach to promote the degradation reactions owing to strongly hydroxyl radicals (OH*). Biological degradation-aided microorganisms (e.g., bacterial and fungal strains) have been reported to be suitable for removing microplastics. Yet, it was affected by biotic and abiotic factors of the environmental conditions (e.g., pH, light, temperature, moisture, bio-surfactants, microorganisms, enzymes) as well as their polymer characteristics, i.e., molecular weight, functional groups, and crystallinity. Notably, membrane bioreactors (MBRs) showed the highest efficiency in removing up to 99% microplastic particles and minimizing their contamination in sewage sludge. Further, MBRs illustrate the suitability for treating high-strength compounds, e.g., polymer debris and microplastic fibers from complex industrial wastewater. Finally, this study provided a comprehensive understanding of potential adverse risks, transportation pathways, and removal mechanisms of microplastic, which full-filled the knowledge gaps in this field.

Nano/microplastics: Fragmentation, interaction with co-existing pollutants and their removal from wastewater using membrane processes

NANO: and microplastic (NP/MP) is one of the most challenging types of micropollutants, coming from either direct release or degradation of plastic items into ecosystems. NP/MP can adsorb hazardous pollutants (such as heavy metals and pharmaceutical compounds) and pathogens onto their surface that are consumed by humans, animals, and aquatic living organisms. This paper presents the interaction of NP/MP with other pollutants in the water environment and mechanisms involved to enable the ultimate fate of NP/MP as well as the effectiveness of metal-organic frame (MOF)-based membrane over conventional membrane processes for NP/MP removal. It is found that conventional membranes could remove MPs when their size is usually more than 1000 nm, but they are ineffective in removing NPs. These NPs have potentially greater health impacts due to their greater surface area. MOF-based membrane could effectively remove both NP and MP due to its large porous structure, high adsorption capacity, and low density. This paper also discusses some challenges associated with MOF-based membranes for NP/MP removal. Finally, we conclude a specific MOF-based ultrafiltration membrane (ED-MIL-101 (Cr)) that can potentially remove both negative and positive charged NP/MP from wastewater by electrostatic attraction and repulsion force with efficient water permeability.

Transport of emerging organic ultraviolet (UV) filters in ceramic membranes: Role of polyethylene (PE) microplastics

Microplastics can be considered potential carriers of emerging organic ultraviolet (UV) filters due to their considerable adsorption capacity in wastewater treatment. The adsorption behavior of organic UV filters, which are commonly contained in personal care products to preserve the skin against UV radiation, onto polyethylene (PE) microplastics were systematically studied to investigate their combined effects. Kinetics and isotherm analyses revealed that the adsorption of four organic UV filters onto PE microplastic surfaces followed a multi-rate and a heterogeneous multi-layer pattern. Several factors including salinity, microplastic size, and dosage also influenced the adsorption efficiency due to hydrophobic interactions. A bench-scale cross-flow ceramic membrane filtration experiment was investigated to evaluate the role of PE microplastics on the retention performance of organic UV filters. The retentions for organic UV filters were 34.2%-37.8% in the non-existence of PE microplastics. Conversely, organic UV filter retentions were significantly increased up to 82.2%-97.9% when they were adsorbed onto the PE microplastics, which were almost completely retained by the ceramic membrane. Therefore, organic UV filters can likely migrate and eventually be carried by PE microplastics, thus increasing the retention of both emerging organic UV filters and microplastics prior to discharge from wastewater treatment facilities.

Potential Adsorption Affinity of Estrogens on LDPE and PET Microplastics Exposed to Wastewater Treatment Plant Effluents

Microplastics (MPs) are among the most common pollutants in the environment. Because of their small size, availability, and similarity to natural foods, they are commonly ingested by marine organisms. They can cause health problems in living organisms due to their bioaccumulation potential. It is, therefore, unknown whether endocrine-disrupting chemicals (EDCs), in particular estrogens, are capable of adhering to the diverse types of MPs found in water. Two MP polymers (low-density polyethylene (LDPE) and polyethene terephthalate (PET)) that could pose a threat to fish were tested for estrogen adsorption. The adsorption capacity of MP pellets was studied for 30 days in the effluent and influent of a wastewater treatment-plant. A laboratory simulation was conducted to validate the field and laboratory findings. We found that the concentrations of five types of estrogen ((diethylstilbestrol (DES), estrone (E1), 17β-estradiol (E2), estriol (E3), 17α-ethinyl estradiol (EE2)) were higher in the influent than the effluent streams. LDPE and PET MPs exposed to influent water in the laboratory had higher estrogen levels than wastewater treatment plants (WWTP) pellets. The PET pellets showed the highest adsorption affinity to EE2, while the LDPE pellets showed the highest affinity to E2. As a result, this study provided baseline data to investigate the estrogen adsorption capacity in MPs.

Various advanced wastewater treatment methods to remove microplastics and prevent transmission of SARS-CoV-2 to airborne microplastics

Microplastics (MPs) and SARS-CoV-2 interact due to their widespread presence in our environment and affect the virus' behaviour indoors and outdoors. Therefore, it is necessary to study the interaction between MPs and SARS-CoV-2. The environmental damage caused by MPs is increasing globally. Emerging pollutants may adversely affect organisms, especially sewage, posing a threat to human health, animal health, and the ecological system. A significant concern with MPs in the air is that they are a vital component of MPs in the other environmental compartments, such as water and soil, which may affect human health through ingesting or inhaling. This work introduces the fundamental knowledge of various methods in advanced water treatment, including membrane bioreactors, advanced oxidation processes, adsorption, etc., are highly effective in removing MPs; they can still serve as an entrance route due to their constantly being discharged into aquatic environments. Following that, an analysis of each process for MPs' removal and mitigation or prevention of SARS-CoV-2 contamination is discussed. Next, an airborne microplastic has been reported in urban areas, raising health concerns since aerosols are considered a possible route of SARS-CoV-2 disease transmission and bind to airborne MP surfaces. The MPs can be removed from wastewater through conventional treatment processes with physical processes such as screening, grit chambers, and pre-sedimentation.

Microplastics profile in constructed wetlands: Distribution, retention and implications

Wastewater and stormwater are both considered as critical pathways contributing microplastics (MPs) to the aquatic environment. However, there is little information in the literature about the potential influence of constructed wetlands (CWs), a commonly used wastewater and stormwater treatment system. This study was conducted to investigate the abundance and distribution of MPs in water and sediment at five CWs with different influent sources, namely stormwater and wastewater. The MP abundance in the water samples ranged between 0.4 ± 0.3 and 3.8 ± 2.3 MP/L at the inlet and from 0.1 ± 0.0 to 1.3 ± 1.0 MP/L at the outlet. In the sediment, abundance of MPs was generally higher at the inlet, ranging from 736 ± 335 to 3480 ± 4330 MP/kg dry sediment and decreased to between 19.0 ± 16.4 and 1060 ± 326 MP/kg dry sediment at the outlet. Although no significant differences were observed in sediment cores at different depth across the five CWs, more MPs were recorded in silt compared to sandy sediment which indicated sediment grain size could be an environmental factor contributing to the distribution of MPs. Polyethylene terephthalate (PET) fibres were the dominant polymer type found in the water samples while polyethylene (PE) and polypropylene (PP) fragments were predominantly recorded in the sediment. While the size of MPs in water varied across the studied CWs, between 51% and 64% of MPs in the sediment were smaller than 300 μm, which raises concerns about the bioavailability of MPs to a wider range of wetland biota and their potential ecotoxicological effects. This study shows that CWs can not only retain MPs in the treated water, but also become sinks accumulating MPs over time.

Medium-Low Temperature Conditions Induce the Formation of Environmentally Persistent Free Radicals in Microplastics with Conjugated Aromatic-Ring Structures during Sewage Sludge Pyrolysis

Medium-low temperature pyrolysis is an effective method of retaining active components in sludge char. However, we found that incomplete cracking reactions resulted in residues of microplastics (MPs) remaining in the char; moreover, high levels of environmentally persistent free radicals (EPFRs) were detected in these MPs. Here, we investigated the temperature-dependent variations in the char-volatile products derived from sludge and MPs under different pyrolysis scenarios using multiple in situ probe coupling techniques and electron paramagnetic resonance spectroscopy, thereby identifying the sources of EPFRs and elucidating the corresponding formation-conversion mechanisms. The temperature was the key factor in the formation of EPFRs; in particular, in the 350-450 °C range, the abundance of EPFRs increased exponentially. Reactive EPFR readily formed in MPs with conjugated aromatic-ring structures (polyethylene terephthalate and polystyrene) at a temperature above 350 °C; EPFR concentrations were 5-17 times higher than those found in other types of polymers, and these radicals exhibited half-lives of more than 90 days. The EPFR formation mechanism could be summarized as solid-solid/solid-gas interfacial interactions between the polymers and the intermediate products from sludge pyrolysis (at 160-350 °C) and the homolytic cleavage-proton transfer occurring in the polymers themselves under the dual action of thermal induction and acid sites (at 350-450 °C). Based on the understanding of the evolution of EPFRs, temperature regulation and sludge components conditioning may be effective approaches to inhibit the formation of EPFRs in MPs, constituting reliable strategies to diminish the environmental risk associated with the byproducts of sludge pyrolysis.

Distribution characteristics of microplastics in urban rivers in Chengdu city: The influence of land-use type and population and related suggestions

In this study, microplastics (MPs) in urban rivers in the Chengdu eco-zone were systematically studied. Microscopic observations and Fourier-transform infrared spectroscopy were used to determine the microplastic (MP) types. The MPs abundance ranged from 20.92 items/L to 762.95 items/L in water and from 20.92 items/100 g dry weight to 58.57 items/100 g dry weight in sediment. In both the water sample and sediment samples, the dominant MPs morphologies were fibres, lumps, and fragments, and the size of MPs was predominantly distributed in the 50-500 μm rage. The primary polymers were polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyethylene terephthalate (PET). Locations with large populations and large areas of woodland and construction land tended to exhibit higher concentrations of MPs. Additionally, compared to water samples, sediment exhibited a more reliable correlation fitting data, thus indicating that sediment was more stable in reflecting the presence of MPs in rivers. This study supplemented the gap in MPs pollution in urban rivers in Chengdu city and discussed the impact of land use and population on the distribution of MPs. Suggestions were provided to alleviate MPs pollution in urban rivers from the perspective of urban planning.

Unraveling microplastics removal in wastewater treatment plant: A comparative study of two wastewater treatment plants in Thailand

Wastewater treatment plants (WWTPs) are considered as a problematic pathway for microplastics (MPs) entering the oceans. This study compares the efficiency of MP removal in two different WWTPs (A₁ and A₂) with a conventional treatment system located in Bangkok, Thailand. WWTP-A₂ is equipped with a pilot-scale ultrafiltration (UF) as a final polishing step. The number of MPs in the influent entering A₁ and A₂ was 16.55 ± 9.92 and 77.00 ± 7.21 MP/L, respectively. The average of 3.52 ± 1.43 and 10.67 ± 3.51 particles per L was found in the effluent discharged from A₁ and A₂, respectively, to nearby canals. The removal efficiency of WWTP-A₂ built as a closed underground system was shown to be up to 86.14% which is more efficient than the conventional WWTP (A₁). MPs were subsequently removed by a UF unit which resulted in a removal efficiency of 96.97%. However, when a large volume of treated wastewater volume is considered, a high concentration of MPs is discharged daily with the final effluent if the efficiency remains the same. The size fraction of 0.5-0.05 mm contributed to the largest proportion of MPs, and fibers were detected as the dominant group at both study sites. Results from a Fourier Transform Infrared Spectroscopy (FT-IR) confirmed that most fibers were polyethylene terephthalate (PET) derived from clothes. MPs retained in the sludge ranged from 2.63 × 10⁴ to 4.74 × 10⁴ particles per kilogram of dry sludge. A significant number of MPs can spread further to the environment by soil application. The results of the study indicate that the design of WWTPs and the addition of advanced tertiary treatment can improve MP removal efficiency of a WWTP. Moreover, the absence of a primary sedimentation tank in both treatment plants may influence the removal efficiency.

Removal of nanoplastics in water treatment processes: A review

Nanoplastics are drawing a significant attention as a result of their propensity to spread across the environment and pose a threat to all organisms. The presence of nanoplastics in water is given attention nowadays as the transit of nanoplastics occurs through the aquatic ecosphere besides terrestrial mobility. The principal removal procedures for macro-and micro-plastic particles are effective, but nanoparticles escape from the treatment, increasing in the water and significantly influencing the society. This critical review is aimed to bestow the removal technologies of nanoplastics from aquatic ecosystems, with a focus on the treatment of freshwater, drinking water, and wastewater, as well as the importance of transit and its impact on health concerns. Still, there exists a gap in providing a collective knowledge on the methods available for nanoplastics removal. Hence, this review offered various nanoplastic removal technologies (microorganism-based degradation, membrane separation with a reactor, and photocatalysis) that could be the practical/effective measures along with the traditional procedures (filtration, coagulation, centrifugation, flocculation, and gravity settling). From the analyses of different treatment systems, the effectiveness of nanoplastics removal depends on various factors, source, size, and type of nanoplastics apart from the treatment method adopted. Combined removal methods, filtration with coagulation offer great scope for the removal of nanoplastics from drinking water with >99 % efficiency. The collected data could serve as base-line information for future research and development in water nanoplastics cleanup.

Labeling Microplastics with Fluorescent Dyes for Detection, Recovery, and Degradation Experiments

Staining microplastics (MPs) for fluorescence detection has been widely applied in MP analyses. However, there is a lack of standardized staining procedures and conditions, with different researchers using different dye concentrations, solvents, incubation times, and staining temperatures. Moreover, with the limited types and morphologies of commercially available MPs, a simple and optimized approach to making fluorescent MPs is needed. In this study, 4 different textile dyes, along with Nile red dye for comparison, are used to stain 17 different polymers under various conditions to optimize the staining procedure. The MPs included both virgin and naturally weathered polymers with different sizes and shapes (e.g., fragments, fibers, foams, pellets, beads). We show that the strongest fluorescence intensity occurred with aqueous staining at 70 °C for 3 h with a dye concentration of 5 mg/mL, 55 mg/mL, and 2 µg/mL for iDye dyes, Rit dyes, and Nile red, respectively. Red fluorescent signals are stronger and thus preferred over green ones. The staining procedure did not significantly alter the surface, mass, and chemical characteristics of the particles, based on FTIR and stereomicroscopy. Stained MPs were spiked into freshwater, saltwater, a sediment slurry, and wastewater-activated sludge; even after several days, the recovered particles are still strongly fluoresced. The approach described herein for producing customized fluorescent MPs and quantifying MPs in laboratory-controlled experiments is both straightforward and simple.

Micro-contaminant, but immense impact: Source and influence of diethyl phthalate plasticizer on bottom-dwelling fishes

Sustainable plastic-waste management is becoming increasingly challenging as enormous loads of plastic debris regularly accumulate in susceptible ecosystems. The microplastic (MP) particles generated from these plastic wastes are imposing additional threats to these ecosystems due to their small size as well as their ability to adsorb and carry toxic chemicals. The current investigation deals with one such MP-originated toxicant, diethyl phthalate (DEP), and its impact on two species of freshwater loaches from the Western Ghats of India, Lepidocephalichthys thermalis and Indoreonectes evezardi. The MP samples were collected from the sediments of the Mula River and characterized using spectroscopic methods and scanning electron microscopy. Polymers, such as polyvinyl chloride and polypropylene, were identified in the collected MPs. GC-MS analysis of the MP extracts revealed the presence of DEP, confirming the MP waste as a potential source of DEP pollution. Further, to evaluate the effect of DEP on survival of selected loaches, L. thermalis and I. evezardi were exposed to DEP concentrations (18.75-300 mg L^-1) and the lethal DEP dose (LC₅₀) was estimated to be 44.53 mg L^-1 for L. thermalis and 34.64 mg L^-1 for I. evezardi. Fishes were further exposed to sub-lethal DEP concentration for one day (Short term exposure: STE) or eight days (Long term exposure: LTE) to analyze the histological condition and oxidative status of the liver in response to DEP treatment. Histology revealed congestion of sinusoids and vacuolization after the LTE. Higher lipid peroxidation levels were also measured in the livers of both species treated with DEP, which indicated DEP-mediated oxidative damage. The antioxidant enzymes including superoxide dismutase, catalase, peroxidase and glutathione-S-transferase displayed elevated activities in response to STE and LTE of DEP. Collectively, the results demonstrate that MPs in the Mula River are a potential source of DEP. The findings also show that DEP exposure can be fatal to freshwater fishes such as loaches, possibly by causing increased oxidative damage to the hepatic system.

Screening of microplastics in water and sludge lines of a drinking water treatment plant in Catalonia, Spain

Microplastics (MPs) are emerging pollutants detected everywhere in the environment, with the potential to harm living organisms. The present study investigated the concentration, morphology, and composition of MPs, between 20 μm and 5 mm, in a drinking water treatment plant (DWTP) located close to Barcelona (Catalonia, NE Spain). The sampling included different units of the DWTP, from influent to effluent as well as sludge line. Sampling strategy, filtration, allows sampling of large volumes of water avoiding sample contamination, and during 8 h in order to increase the representativeness of MPs collected. The pre-treatment of the samples consisted of advanced oxidation with Fenton's reagent and hydrogen peroxide, followed by density separation of the particles with zinc chloride solution. Visual identification was performed with an optical and stereoscopic microscope with final Fourier-transform infrared spectroscopic (FTIR) confirmation. MPs were found in all DWTP samples, with concentrations from 4.23 ± 1.26 MPs/L to 0.075 ± 0.019 MPs/L in the influent and effluent of the plant, respectively. The overall removal efficiency of the plant was 98.3%. The most dominant morphology was fibers followed by fragments and films. Twenty-two different polymer types were identified and synthetic cellulose, polyester, polyamide, polypropylene, polyethylene, polyurethane, and polyacrylonitrile were the most common. Although MPs could be incorporated from the distribution network, MPs intake from drinking water from this DWTP was not an important route compared to fish and seafood ingestion.

Understanding and mitigating the distinctive stresses induced by diverse microplastics on anaerobic hydrogen-producing granular sludge

This work comparatively studied the different stress responses of anaerobic hydrogen-producing granular sludge (HPG) to several typical MPs in wastewater, i.e., polyethylene (PE), polyethylene terephthalate (PET), and polyvinyl chloride (PVC) MPs. A new approach to mitigating the inhibition caused by MPs based on biochar was then proposed. The results displayed that microbe in HPG had diverse tolerances to PE-MPs, PET-MPs and PVC-MPs, with the hydrogen production downgraded to 82.0 ± 3.2 %, 72.3 ± 2.5 % and 66.6 ± 2.3 % (p < 0.05) of control respectively, due to the distinct leachates toxicities and oxidative stress level induced by different MPs. The discrepant mitigation reflected in the hydrogen yields of biochar-based HPGs raised back to 88.7 ± 1.4 %, 85.3 ± 3.8 % and 88.5 ± 3.5 % of control. The MPs induced disintegrated granule morphology, fragile microbial viability and impaired defensive function of extracellular polymeric substances were restored by biochar. The effective mitigation was revealed to be due to the strong adsorption of MPs by biochar, reducing direct contact between microbes and MPs. Biochar addition also enhanced protection for HPG by increasing EPS secretion and weakened the oxidative damage to anaerobes induced by MPs. Biochar manifested the disparate adsorption properties of three MPs. The most superior mitigation in HPG contaminated by PVC-MPs was attributed to the strongest affinity of biochar to PVC-MPs and effective alleviation of PVC leachates toxicity.

The atmospheric microplastics deposition contributes to microplastic pollution in urban waters

Identifying and understanding the potential sources delivering microplastics into the urban water environment is imperative for microplastic pollution control. However, how atmospheric deposition contributes to microplastic pollution in the urban water environment is unclear. Therefore, this study investigated the contribution of atmospheric deposition to microplastic pollution in urban waters based on the analysis of the atmospheric deposition characteristics in the urban area. The results showed that microplastic deposition fluxes during wet weather and dry weather varied from 1.1 × 10³±0.06×10³ to 3.5 × 10³±0.3 × 10³ particles/m²/day and 0.91×10³±0.09×10³ to 1.6 × 10³±0.1 × 10³ particles/m²/day, respectively. The microplastics deposition flux showed moderate to strong correlations to atmospheric particulate matter concentrations, especially the PM2.5 concentration (R² = 0.76-0.93), suggesting the regularly monitored PM2.5 concentration might be served as an indicator for microplastics deposition flux estimation. The deposited microplastics were mainly transparent fragments with an average size of 51-67 μm. Polyethylene and polypropylene were the most abundant plastic polymer, followed by polyethylene terephthalate and polyamide. The comparison of microplastics collected during different weather conditions suggested that rain events could increase microplastics deposition fluxes when air quality conditions are similar. Particularly, rains promoted the deposition of fibrous microplastics as well as smaller microplastics. The estimated daily microplastics deposition in the whole city region suggested more microplastics were deposited in summer and winter. The total quantity of microplastics deposited in the urban environment could reach 1.7-12 times of those discharged from treated wastewater. Among them, 10% would directly deposit to urban waters in the studied city region, while the others may also enter the urban waters through runoff. The results of this study highlighted that the atmospheric microplastics deposition is an important source for microplastics, especially smaller ones, to enter the urban waters, which could not be ignored during microplastics pollution control.

Spatial distribution of microplastics pollution in sediments and surface waters of the Aras River and reservoir: An international river in Northwestern Iran

Microplastics (MPs) in freshwater environments have been recognized as one of the important sources of plastic contamination in marine ecosystems. Reducing the amount and spatial distribution of MPs reaching the sea through accumulation behind dams remains unclear. In this study we analyzed the spatial distribution of sediment and surface water MPs in the Aras Dam and from nineteen upstream and downstream locations of the Dam in the Aras River. The MPs abundance ranged from 32 to 528 items/kg dry weight (mean 217.8 ± 132.6) and 1 to 43 items/m³ (mean 12.8 ± 10.5) in the sediment and surface water stations, respectively. MPs abundance in surface waters collected within the Dam reservoir was significantly higher than those found either upstream or downstream (P < 0.05). For sediments, reservoir MPs concentration was generally higher than upstream and downstream, although their differences were not significant. High MPs concentration was observed in the vicinity of urban areas. Moreover, MPs abundance was positively correlated with total organic carbon (TOC) and clay content (P < 0.01). GAM analysis revealed that clay is the most important variable with lowest Akaike information criterion (AIC) and explained 61.3 % of deviance (R-sq.(adj) = 0.344) in MPs abundance. MP particles ranged from 0.1 to 5 mm in size and were dominated by fibers (53.5 %), black color (24 %) and PE polymer (36.6 %). Our results highlight the high MPs distribution in the Aras River and demonstrate that they accumulate in the surface waters behind the Dam. Consequently, the fate and effects of MPs in international rivers is one of the most politicized issues between countries with a common boundary and therefore needs joint management policies that help mitigate this insidious problem.

Occurrence, seasonal distribution, and ecological risk assessment of microplastics and phthalate esters in leachates of a landfill site located near the marine environment: Bushehr port, Iran as a case

Plastic wastes are produced in a large amount everywhere, and are commonly disposed in landfills. So landfill leachate seems an obvious source of microplastics (MPs) and phthalate esters (PAEs) due to a huge usage as plastic additives and plasticizers. But this issue still lacks attention and the present study provides the first information on the levels of MPs and PAEs in the fresh landfill leachate of Bushehr port during different seasons. The mean levels of MPs and PAEs in the fresh leachate in all seasons were 79.16 items/L and 3.27 mg/L, respectively. Also, the mean levels of PAEs in MPs were 48.33 μg/g. A statistically significant difference was detected in the levels of MPs and PAEs among different seasons with the highest values in summer and fall. MPs with a size of >1000 μm had the highest abundance in all seasons. The most prominent shape, color, and type of MPs in the leachate were fibers black, and nylon, respectively. Dibutyl phthalate (DBP) and Di(2-ethylhexyl) phthalate (DEHP) were the most dominant PAEs present in the leachate samples. The results of this study revealed high hazard index (HI) and pollution load index (PLI) of MPs in all seasons. Dioctyl phthalate (DOP), DEHP, DBP, diisobutyl phthalate (DiBP), butyl benzyl phthalate (BBP), and diethyl phthalate (DEP) represented a high risk to the sensitive organisms. The results of this study showed that significant levels of MPs and PAEs may release into the surrounding environment from the landfill sites without sufficient protection. This issue is more critical when the landfill sites in particular are located near the marine environments like the Bushehr landfill that is located near the Persian Gulf, which can lead to serious environmental problems. Thus permanent control and monitor of landfills, especially in the coastal areas are highly needed to prevent further pollution.

Microplastics in aquatic systems, a comprehensive review: origination, accumulation, impact, and removal technologies

Although the discovery of plastic in the last century has brought enormous benefits to daily activities, it must be said that its use produces countless environmental problems that are difficult to solve. The indiscriminate use and the increase in industrial production of cleaning, cosmetic, packaging, fertilizer, automotive, construction and pharmaceutical products have introduced tons of plastics and microplastics into the environment. The latter are of greatest concern due to their size and their omnipresence in the various environmental sectors. Today, they represent a contaminant of increasing ecotoxicological interest especially in aquatic environments due to their high stability and diffusion. In this regard, this critical review aims to describe the different sources of microplastics, emphasizing their effects in aquatic ecosystems and the danger to the health of living beings, while examining, at the same time, those few modelling studies conducted to estimate the future impact of plastic towards the marine ecosystem. Furthermore, this review summarizes the latest scientific advances related to removal techniques, evaluating their advantages and disadvantages. The final purpose is to highlight the great environmental problem that we are going to face in the coming decades, and the need to develop appropriate strategies to invert the current scenario as well as better performing removal techniques to minimize the environmental impacts of microplastics.

Review on invasion of microplastic in our ecosystem and implications

Today the world is going through the "Plastic Age." Nowadays, it is difficult to find a commonly used convenient item that is nonplastic. Plastic production and consumption, thus, increased exponentially and plastic emerged as one of the major concerns for waste management. Recent studies confirmed a faster rate of plastic degradation than previously believed under various conditions (e.g. saltwater, UV, soil interaction) that microplastic has become a new type of health-hazardous pollution source. Much research has been conducted since the discovery of the "Pacific Garbage Patch," and the scope has expanded from marine to soil, groundwater, air, and food chain. This article underwent a substantial amount of literature review to verify the degree of microplastic pollution progression in major pillars of the environment (aqueous, terrestrial, airborne, bio-organism, and human). Multiple kinds of literature indicated a high possibility of vigorous interaction among the pillars that microplastic is not stationary at the point of contamination but travels across the nation (transboundary) and medium (transmedium). Thus, only the waste reduction policy (i.e. production and consumption reduction) would be effective through a single national or local effort, while pollution and contamination management require more of a collective, if not global, approach. For these characteristics, this article proposes two most urgently required actions to combat microplastic pollution: (a) global acknowledgement of microplastic as transboundary and transmedium pollution source that require international collective action and (b) standardization of microplastic related research including basic definition and experimental specification to secure global comparativeness among data analysis. Without resolving these two issues, it could be very difficult to obtain an accurate global status mapping of microplastic pollution to design effective and efficient global microplastic pollution management policies.

Microplastics in landfill and leachate: Occurrence, environmental behavior and removal strategies

Plastic wastes buried in landfill are gradually broken and decomposed into microplastics under physical, chemical and biological effects, bringing environmental risks to the exploitation of waste resources. Landfill leachate as a potential source of environmental microplastics has not good attention. Microplastics in leachate carry toxic and harmful pollutants and antibiotic resistance genes, and these vectors pose greater risks to human and environmental health without systematic treatment. Recently, the main technologies of landfill leachate treatment process include order batch activated sludge process, membrane biological reaction process, flocculation process, combined filtration process, and constructed wetland process. However, there is still little knowledge about microplastic removal of the existing leachate treatment facilities, and some technologies to alleviate the sources of such microplastics should be timely developed. This paper systematically summarizes the occurrence of plastics, microplastics and nanoplastics in leachate and their interactive pollution with other toxic pollutants. Meanwhile, the prospects of their environmental behaviors in landfill and leachate are put forward. The microplastic removal by existing leachate treatment equipment and the limitations and challenges to upgrading process of development and implementation are also discussed. The paper can provide a scientific basis for studying the fate of microplastics in landfill and leachate.

Abundance and characteristics of microplastics in an urban wastewater treatment plant in Turkey

Wastewater treatment plants (WWTPs) are considered one of the important sources of aquatic/terrestrial microplastic (MP) pollution. Therefore, the abundance and properties of MPs in the wastewater and sludge of an urban WWTP in Bursa Turkey were investigated. The amount, properties, and removal of MPs were evaluated. The results showed that the average abundance of MPs was 135.3 ± 28.0 n/L in the influent and 8.5 ± 4.7 n/L in the effluent, with a 93.7% removal rate, MP was removed and transferred to the sludge. The daily MP amount released in the aquatic environment is calculated as 525 million MPs, and the annual amount is 1.9 × 10¹¹ MPs. The abundance of MPs in the sludge thickening and sludge filter cake is 17.9 ± 2.3 and 9.5 ± 2.3 n/g dry weight (dw), respectively. The sludge disposal amount of WWTP is 81.5 tons/day and the approximate amount of MP accumulated in the sludge per year is calculated as 2.8 × 10¹¹ MPs. In wastewater and sludge samples, fragment dominant shape, black main colour, and 500-1000 μm sizes are the most common size. The main MP types in wastewater samples at the influent are polypropylene (PP, 36.8%), polyethylene (PE, 31.0%), polystyrene (PS, 11.8%), polyethylene terephthalate (PET, 8.0%), and polyamide (PA, 7.1%), at the effluent (PE, 33.0%), (PP, 52.5%), and (PS, 8.2%). In the sludge cake, the distribution is (PE, 40.8%), (PP, 27.6%), (PS, 18.7%) and (PET, 8.0%). The results of this study show that MPs are removed from wastewater with high efficiency by treatment processes and a significant amount accumulates in the sludge. Therefore, it is suggested that to integrate advanced treatment processes into urban WWTPs and use effective sludge disposal management practices to reduce the amount of MP released into the environment with effluent and sludge.

Seasonal variation and complex analysis of microplastic distribution in different WWTP treatment stages in Lithuania

Industrial wastewater, domestic wastewater, and stormwater are the three entry points for microplastics (MP) in wastewater treatment plants. Extreme weather conditions, such as rising temperatures and heavy rainfall caused by climate change, can alter the rate at which MP enters wastewater treatment plants. In this study, wastewater and sludge samples from different treatment stages were collected during a 12-month sampling campaign (seasonal) to determine the efficiency of a municipal wastewater treatment plant in removing microplastic particles. MP ranging from 20 to 1000 µm were detected and classified by shape, color, size, and chemical composition. All samples contained MP particles, with concentration ranging from 1964 ± 50-2982 ± 54 MP/L in influent to 744 ± 13-1244 ± 21 MP/L in effluent and 91.1 ± 8-61.9 ± 5 MP/g in sludge; 71.6-90.1% identified particles were fragment-type with black, white, and transparent colors. Most of the microplastic particles were removed in the activated sludge tank, while the average removal rate in the wastewater treatment plant was 57%. The total concentration of MP was 27% higher in spring than in other seasons. The most common microplastic particles were polyethylene terephthalate (PET), polystyrene (PS), and polypropylene (PP). These results demonstrate the value of long-term monitoring and MP quantification, which would provide a more accurate estimate of MP pollution from wastewater treatment plants.

Distinct bacterial communities and resistance genes enriched by triclocarban-contaminated polyethylene microplastics in antibiotics and heavy metals polluted sewage environment

Knowledge gaps still surround the question of what biofilms form on contaminated microplastics (MPs) in the antibiotics and (or) heavy metals polluted sewage. In this work, the clean polyethylene microplastics (PE MPs) and triclocarban (TCC)-contaminated PE MPs were cultured in the sewage containing only ampicillin (AMP), only copper (Cu) and both AMP and Cu for 28 days. The results showed that the TCC on PE MPs (with concentration of 2.48 mg/g PE MPs) did not impede the adhesion of the bacteria and the formation of biofilm. Moreover, many potential pathogenic bacteria (Aquabacterium and Pseudoxanthomonas) and potential resistant bacteria (Stenotrophomonas) were more likely to attach on TCC-contaminated PE MPs compared with clean PE MPs. In addition, biofilms of TCC-contaminated PE MPs had highest potential pathogenic functions. TCC-contaminated PE MPs also caused the increases of various resistance genes in both biofilm and sewage. The co-occurrence of TCC, AMP and Cu might exert a stronger selective pressure on bacterial communities and promote the co-selection of resistance genes. In addition, TCC-contaminated PE MPs resulted in higher abundance of five mobile genetic elements (MGEs) (intI1, intI3, tnpA-04, IS613 and trb-C) in sewage, which might further promote the transmission of resistance genes.

Biosolids: The Trojan horse or the beautiful Helen for soil fertilization?

The simultaneous requirement to manage resources and wastes in more rational way has meant that many communities worldwide have begun to search for long-term alternative solutions. Reuse and recovery of biosolids is considered to be a constant solution of circular sustainability, as waste disposal without further reuse background like fertilizer is no longer an alternative to be promoted. There have been developed many treatment methods over the years for the stabilization and sanitization of biosolids. However, the literature concludes that none of them is fully integrated by meeting all the basic criteria. Each method has its Achilles heel, and the appropriateness of the method lies in what is the goal each time. There are conventional methods with positive reciprocity in terms of sustainability, reuse indicators and technological maturity, but have high risk of microorganisms' reappearance. New advanced sustainable technologies, such as cold plasma, need to be further studied to apply on a large scale. The reuse of biosolids as construction materials is also discussed in the context of circular economy. Biosolids reuse and management legislation frame need to be revised, as a directive adopted 30 years ago does not fully meet communities' current needs.

Ignored microplastic sources from plastic bottle recycling

The recovery and recycling of plastic products has increased dramatically in recent years as a strategy to achieve sustainable production and minimization of plastic pollution. However, the release of microplastics during plastic recycling has received little attention. We evaluated the generation and fate of microplastics in three typical facilities which make polyethylene terephthalate (PET) flakes using post-consumer PET bottles as raw material. Microplastics, 0.1- 5.0 mm in size, were detected in production wastewater at concentrations ranging from 23.43 ± 1.04 mg/L to 1836.37 ± 31.73 mg/L, while decreased to (8.13 ± 0.42-83.83 ± 0.93) mg/L in discharge effluent and (52,166 ± 2858-68,866 ± 2500) μg/g in sludge. Interestingly, the profiles of microplastics in samples from production wastewater, effluents, and sludge showed significant differences. Although, in all three compartments, the mass of microplastics increased, and the particle number decreased with increasing particle size. Overall, the removal ratio of total microplastics from the production wastewater was 53.47 ± 4.48% to 99.56 ± 0.02% in mass, and from 90.08 ± 0.82% to 99.56 ± 0.05% in quantity. The loss of microplastics from wastewater resulted in their concentration in sludge. Factors that influence the transfer of microplastics from wastewater to sludge should be identified and utilized to maintain a high level of removal and prevent leakage of these particles into the environment.

Transfer of microplastics in sludge upon Fe(II)-persulfate conditioning and mechanical dewatering

Sewage treatment plants act as both sinks and sources of microplastics with elevated concentrations of microplastics accumulating in the sludge. Consequently, the effects of sludge conditioning and dewatering processes on the fate of microplastics need to be clarified. Microplastic characteristics in sludge, before and after advanced oxidation Fe(II)-activated persulfate conditioning were studied using a microplastics dynamic flotation separator (MDFS). In the unconditioned sludge (no dewatering), white and transparent microplastics dominated and seven types of plastic polymer were detected with polyethylene (30.3%) and polypropylene (23.9%) being the main ones. Pellet microplastics were found to be the dominant morphology, accounting for 67.0% of the total number of microplastics. The abundance of microplastics extracted using the MDFS device from the unconditioned (no dewatering) sludge was 320 ± 3 particles g^-1 dried sludge, which was greater by 37% than extracted using microplastics static flotation separation. Due to the release of the adsorbed microplastics from the destroyed sludge flocs after conditioning, the abundance of extractable microplastics increased by 19 ± 2% as compared to the unconditioned sludge (both with no dewatering). After filter presses (plate-frame filter, vacuum filter) and centrifuge dewatering, 81-90% of the microplastics were present in the filter cake, of which microplastics <500 μm accounted for more than 80% of the total number. The abundance of microplastics per unit volume of filtrate after filter press dewatering was significantly smaller than after centrifuge dewatering (3.2-4.4 × 10³ cf 13.0 × 10³ particles L^-1, respectively). The difference increments in relative abundance of <10 μm microplastics in the centrifuge filtrate was about twice that of the filter presses. The surface morphology of the microplastics did not change in the conditioning process. This study highlights the need to assess the application of advanced oxidation conditioning which has significant influence on the microplastics distribution via the subsequent sludge dewatering.

Occurrence, analysis of microplastics in sewage sludge and their fate during composting: A literature review

Microplastics (MP) are ubiquitous contaminants and their presence in sewage sludge has recently received attention as they may enter agro-ecosystems if sludge is used as organic soil amendment. Indeed, plastic particles (<5 mm) can be transported from wastewater and sewage sludge to the soil environment either directly within the plastic matrix or indirectly as adsorbed substances. In this paper, articles from 18 countries reporting the MP quantity and their characteristics in sewage sludge from wastewater treatment plants were reviewed and the MP concentration size and type were compared. The data show that MP abundance in sewage sludge ranged globally from 7.91 to 495 × 10³ particles kg^-1 with highest abundance of fiber shape and MP size of less than 500 μm. In this review, we summarized and discussed the methods most frequently used for extraction and characterization of MP in sewage sludge including organic matter removal, MP extraction; physical and morphological MP characterization and its chemical characterization for polymer identification. We also described the major factors potentially controlling the fate of MP during disposal strategies with particular focus on composting. We show that physical and microbiological factors are important for MP degradation during composting and suggest two remediation practices: (i) inoculation of the initial sludge with microbial plastic decomposers to remove MP from contaminated sewage sludge, and (ii) development of high temperature composting processes.

A global review of microplastics in wastewater treatment plants: Understanding their occurrence, fate and impact

Microplastics (MPs) are emerging as a serious environmental concern, with wastewater treatment plants (WWTPs) acting as the main entry routes for MPs into aquatic and terrestrial ecosystems. On a global scale, our literature review found that MP research in WWTPs has only been conducted on 121 WWTPs in 17 countries, with the majority of the work being done in Europe (53%), followed by the United States of America and Canada (24%), Asia (18%), and Australia (5%) in recent years. MPs in WWTPs are primarily derived from Personal Care and Cosmetic Products (PCCPs), which are primarily composed of polyethylene (PE) derivatives. Based on the studies, microfibers (57%) and fragments (47%) are observed to be the most common MP forms in influents and effluents of WWTPs. The chemical characterization of MPs detected in WWTPs, showed the occurrence of polyethylene (PE) (22%), polystyrene (PS) (21%), and polypropylene (13%). Although MP retention/removal efficiencies of different treatment technologies vary from medium to high, deliberations on sludge disposal on agricultural soils containing MPs and MP intrusion into groundwater are required to sustainably regulate MP contaminant transport. Thus, the development of efficient detection methods and understanding their fate are of immense significance for the management of MPs. Despite the fact that ongoing research in MPs and WWTPs has unquestionably improved our understanding, many questions and concerns remain unanswered. In this review, the current status of the detection, occurrence, and impact of MPs in WWTPs across the world are systematically reviewed to prioritize policy-making to recognize the WWTPs as global conduits of MPs.

Microplastic removal from urban stormwater: Current treatments and research gaps

Stormwater is a major contributor to microplastic (MP) pollution in the aquatic environment. Although MPs are associated with many toxicological effects, their levels in stormwater are not regulated. This review compared the effectiveness of different MP removal technologies from stormwater runoff and examined the performance of typical stormwater treatment systems for MP removal to assess possible MP pollution control via stormwater management. Bioretention and filtration systems performed similarly with 84-96% MP removal efficiencies. Despite the limited number of studies that focused on wetlands and retention ponds, preliminary data suggested potential for MP removal with efficiencies of 28-55% and 85-99%, respectively. Despite the higher efficiency of bioretention and filtration systems, their removal efficiency of fibrous MPs was not optimal. Furthermore, wetlands were less effective in removing MPs than retention ponds, although the limited data might lead to an inaccurate representation of typical performances. Therefore, more research is required to arrive at definitive conclusions and to investigate alternative treatment options, such as ballasted sand flocculation, flotation, and biological degradation, and evaluate the effectiveness of bioretention and filtration for MPs <100 μm.

Synthetic polymers in personal care and cosmetics products (PCCPs) as a source of microplastic (MP) pollution

Intentionally added MPs in PCCPs have created concerning threats to the environment. Therefore, this study aimed to screen synthetic polymers having MPs favoring chemical properties in PCCPs while estimating the theoretical emission into the environment and the level of awareness on the availability of MPs in PCCPs. A questionnaire survey was conducted via Google form using a complete random sampling method (n = 312). Next, a market survey was conducted and theoretical estimations were calculated for the products that recorded the highest MPs favoring polymers. Toothpaste products were identified as mostly used (95.8 %) and face cleanser (20.8 %) as least used. Of those MP ingredients, many chemical ingredients (11) were acrylate copolymers, and dimethicone polymers (5). A total of 21.4 trillion MP particles are released to the environment annually from considered four PCCPs. This study evidenced the availability of MP favoring chemicals in PCCPs in the Sri Lankan market that need further assessments.

Metabolic impacts of polystyrene microplastics on the freshwater microalga Microcystis aeruginosa

Microplastics (plastic particles < 5 mm; MPs) are ubiquitous in aquatic environments but their potential adverse ecological effects on biota remain poorly understood. This is in part because in typical ecotoxicology tests the toxic effects of MPs were found to be limited. To capture the potential find-scale effects of MPs on freshwater organisms, we employed ultra-performance liquid chromatography-tandem mass spectrometry based untargeted metabolomics to investigate the metabolic impact of polystyrene microbeads microplastics (PS-MPs) of different sizes (0.1, 1, 10, 100 μm) and concentrations (1, 10, 100 mg/L) on a common freshwater microalga, Microcystis aeruginosa, after a 96-h exposure test. The phenotype-based results illustrated that while PS-MPs had no discernible effects on microalgal growth and photosynthesis, both oxidative stress and microcystin production were slightly increased. Metabolomics analysis revealed that the PS-MPs altered the global metabolic profile of the microalga. Specially, PS-MPs of larger size and higher concentration induced a larger number of differentially expressed metabolites. The PS-MPs significantly disturbed metabolisms involved in amino acid synthesis, membrane formation, nitrogen storage, and antioxidant defense of the microalga, consistent with the phenotypic observations. These results suggested several perturbed metabolic pathways, especially arginine-related pathways, as the mechanism. Our study showed that the insights provided by metabolomics-based approaches can enhance assessments of the ecological impacts of MPs on freshwater organisms.

Effects of a microplastic mixture differ across trophic levels and taxa in a freshwater food web: In situ mesocosm experiment

The ubiquitous presence of microplastics (MP) in aquatic ecosystems can affect organisms and communities in multiple ways. While MP research on aquatic organisms has primarily focused on marine ecosystems and laboratory experiments, the community-level effects of MP in freshwaters, especially in lakes, are poorly understood. To examine the impact of MP on freshwater lake ecosystems, we conducted the first in situ community-level mesocosm experiment testing the effects of MP on a model food web with zooplankton as main herbivores, odonate larvae as predators, and chironomid larvae as detritivores for seven weeks. The mesocosms were exposed to a mixture of the most abundant MP polymers found in freshwaters, added at two different concentrations in a single pulse to the water surface, water column and sediment. Water column MP concentrations declined sharply during the first two weeks of the experiment. Contrary to expectations, MP ingestion by zooplankton was low and limited mainly to large-bodied Daphnia, causing a decrease in biomass. Biomass of the other zooplankton taxa did not decrease. Presence of MP in the faecal pellets of odonate larvae that fed on zooplankton was indicative of a trophic transfer of MP. The results demonstrated that MP ingestion varies predictably with MP size, as well as body size and feeding preference of the organism, which can be used to predict the rates of transfer and further effects of MP on freshwater food webs. For chironomids, MP had only a low, short-term impact on emergence patterns while their wing morphology was significantly changed. Overall, the impact of MP exposure on the experimental food web and cross-ecosystem biomass transfer was lower than expected, but the experiment provided the first in situ observation of MP transfer to terrestrial ecosystems by emerging chironomids.

Multiple microplastics induced stress on anaerobic granular sludge and an effectively overcoming strategy using hydrochar

Previous studies mostly focused on the responses of anaerobic granular sludge (AGS) to one kind of microplastics during wastewater treatment. However, a wide variety of microplastics has been detected in wastewater. The multiple microplastics induced stress on AGS and the effectively mitigating strategy still remain unavailable. Herein, this work comprehensively excavated the influences of multiple microplastics (i.e., polyethylene terephthalate (PET), polystyrene (PS), polyethylene (PE) and polypropylene (PP)) coexisting in the wastewater on AGS system from macroscopic to microcosmic aspects. Experimental results illustrated that microplastics decreased AGS granule size, increased cell inactivation and caused deteriorative methane recovery from wastewater. As such, this study then put great emphasis on proposing a mitigating strategy using hydrochar and disclosing the role of hydrochar in overcoming the stress induced by coexisting microplastics to AGS system. Physiological characterization and microbial community analysis demonstrated that hydrochar effectively mitigated the reductions in methane production by 50.6% and cell viability by 68.8% of microplastics-bearing AGS and reduced the toxicity of microplastics to microbial community in the AGS. Mechanisms investigation by fluorescence tagging and excitation emission matrix fluorescence spectroscopy with fluorescence regional integration (EEM-FRI) analysis revealed that hydrochar adsorbed/accumulated microplastics and enhanced microplastics-bearing AGS to secrete extracellular polymeric substance (EPS) with more humic acid generation, thus reducing the direct contact between microplastics and AGS. In addition, hydrochar weakened the AGS intracellular oxidative stress induced by microplastics, thereby completely eliminating the inhibition of microplastics on acidification efficiency of AGS, and partially mitigating the suppression on methanation.

Bacterial cellulose biopolymers: The sustainable solution to water-polluting microplastics

Microplastics (MPs) pollution has become one of our time's most consequential issue. These micropolymeric particles are ubiquitously distributed across all natural and urban ecosystems. Current filtration systems in wastewater treatment plants (WWTPs) rely on non-biodegradable fossil-based polymeric filters whose maintenance procedures are environmentally damaging and unsustainable. Following the need to develop sustainable filtration frameworks for MPs water removal, years of R&D lead to the conception of bacterial cellulose (BC) biopolymers. These bacterial-based naturally secreted polymers display unique features for biotechnological applications, such as straightforward production, large surface areas, nanoporous structures, biodegradability, and utilitarian circularity. Diligently, techniques such as flow cytometry, scanning electron microscopy and fluorescence microscopy were used to evaluate the feasibility and characterise the removal dynamics of highly concentrated MPs-polluted water by BC biopolymers. Results show that BC biopolymers display removal efficiencies of MPs of up to 99%, maintaining high performance for several continuous cycles. The polymer's characterisation showed that MPs were both adsorbed and incorporated in the 3D nanofibrillar network. The use of more economically- and logistics-favourable dried BC biopolymers preserves their physicochemical properties while maintaining high efficiency (93-96%). These polymers exhibited exceptional structural preservation, conserving a high water uptake capacity which drives microparticle retention. In sum, this study provides clear evidence that BC biopolymers are high performing, multifaceted and genuinely sustainable/circular alternatives to synthetic water treatment MPs-removal technologies.

Modifications of microplastics in urban environmental management systems: A review

Microplastics (MPs) are a worldwide environmental pollution issue. Besides the natural environmental stresses, various treatments in urban environmental management systems induce modifications on MPs, further affecting their environmental behavior. Investigating these modifications and inherent mechanisms is crucial for assessing the environmental impact and risk of MPs. In this review, up-to-date knowledge regarding the modifications of MPs in urban environmental management systems was summarized. Variations of morphology, chemical composition, hydrophilicity and specific surface area of MPs were generalized. The aging and degradation of MPs during drinking water treatment, wastewater treatment, sewage sludge treatment and solid waste treatment were investigated. A high abundance of MPs occurred in sewage sludge and aging solid waste, while digestion and composting contributed to significant decomposition and reduction of MPs. These treatments have become converters for MPs before entering the environment. Several novel technologies for MPs removal were listed; However, no appropriate methods can be put into actual application by now, except the membrane separation. The corresponding effects of degradation on the behaviors of MPs, including adsorption, sinking and contaminant leakage, were discussed. Finally, three priorities for research were proposed. This critical review provides viewpoints and references for risk evaluation of MPs after treatments in urban environmental management systems.

Investigation of the effect of microplastics on the UV inactivation of antibiotic-resistant bacteria in water

This study investigated the effect of polyethylene and polyvinyl chloride microplastics on the UV fluence response curve for the inactivation of multidrug-resistant E. coli and enterococci in ultrapure water at pH 6.0 ± 0.1. In the absence of microplastics, the UV inactivation of the studied bacteria exhibited an initial resistance followed by a faster inactivation of free (dispersed) bacteria, while in the presence of microplastics, these 2 regimes were followed by an additional regime of slower or no inactivation related to microplastic-associated bacteria (i.e., bacteria aggregated with microplastics resulting in shielding bacteria from UV indicated by tailing at higher UV fluences). The magnitude of the negative effect of microplastics varied with different microplastics (type/particle size) and bacteria (Gram-negative and Gram-positive). Results showed that when the UV transmittance of the microplastic-containing water was not taken into account in calculating UV fluences, the effect of microplastics as protectors of bacteria was overestimated. A UV fluence-based double-exponential microbial inactivation model accounting for both free and microplastic-associated bacteria could describe well the disinfection data. The present study elucidated the effect of microplastics on the performance of UV disinfection, and the approach used herein to prove this concept may guide future research on the investigation of the possible effect of other particles including nanoplastics with different characteristics on the exposure response curve for the inactivation of various microorganisms by physical and chemical disinfection processes in different water and wastewater matrices.

Elimination of Microplastics at Different Stages in Wastewater Treatment Plants

Microplastic pollution has been widely studied as a global issue due to increased plastic usage and its effect on human and aquatic life. Microplastics originate from domestic and industrial activities. Wastewater treatment plants (WWTPs) play an important role in removing a significant amount of microplastics; otherwise, they end up in bioaccumulation. This study provides knowledge about the characteristics of microplastics, removal efficiency, and the correlation between wastewater quality and microplastic concentrations from three different WWTPs that differ in the type of biological and advanced wastewater treatment techniques that are believed to play an important role in microplastic removal. Microplastics of different types, such as fragments, fibers, and beads, are identified by using an optical microscope before and after the treatment process at each stage to assess the effect of different treatment techniques. In the screening unit and primary clarifier unit, WWTP-B shows the highest removal efficiency with 74.76% due to a distribution flow system installed before the primary clarifier to ensure a constant flow of wastewater. WWTP-B uses a bioreactor consisting of a filter plate coated with activated carbon (BSTS II) that can enhance the adaptability and adhesion of microorganisms and showed that 91.04% of the microplastic was removed. Furthermore, only WWTP-A and WWTP-B were applied coagulation, followed by the disc filter; they showed significant results in microplastic removal, compared to WWTP-C, which only used a disc filter. In conclusion, from all WWTP, WWTP-B shows good treatment series for removing microplastic in wastewater; however, WWTP-B showed a high rate of microplastic removal; unfortunately, large amounts of microplastics are still released into rivers.

Occurrence, identification, and discharge of microplastics from effluent and sludge of the largest WWTP in Iran-South of Tehran

Microplastic pollution is a serious threat to the biota and humans, and wastewater treatment plants act as a pathway for entering microplastics into the environment. This study discusses the identification and quantification of microplastics in the south of Tehran municipal WWTP. The sampling was repeated three times in a month, overall, nine times for water samples and once a month in total, three times for digested sludge samples by steel bucket with the WPO method. The microplastics from water and digested sludge samples were identified using the micro-Raman microscope. According to this study, 98.9% of microplastic particles in effluent and 99.2% of microplastics particles in the sludge were fibers. The influent contained an average of 180 ± 4.3 MP/L and was reduced to 5.3 ± 0.31 MP/L in the final effluent. Despite this significant reduction, we calculate that this WWTP releases 2.3 × 10⁹ microplastics per day through final effluent and 1.61 × 10¹⁰ particles per day through dried sludge into the environment. We performed micro-Raman analyses and ICP mass to measure the amount of heavy metal absorption of MPs. In addition, SEM analyses were used to study the surface morphology of microplastic particles. PRACTITIONER POINTS: Fourteen different polymers were identified in the influent, effluent, and digested sludge. The main collected shapes obtained were fiber, film, and fragment, which fiber was the predominant polymer in this WWTP. The plant releases 2.3 * 10⁹ MPs per day to its downstream environment. This WWTP has average removal with an efficiency of 99.06%.

Extensive investigation and beyond the removal of micro-polyvinyl chloride by microalgae to promote environmental health

Microplastics (MPs) remediation via algae could be a prospective strategy to address MPs pollution concerns. In this study, Chlorella sp. GEEL-08 was exposed to different gradient concentrations ranging from 0 to 200 mg L^-1 of polyvinyl chloride (PVC_0.2μm). Microalgal growth, total nitrogen (TN), total phosphorus (TP), and cations (Cu, Zn, Na, and K) removal were investigated. The oxidative stress enzymes such as superoxide dismutase (SOD) and malonaldehyde (MDA) were also assessed. The addition of 50 mg L^-1 mPVC resulted in the highest growth along with >99% removal of nutrients (TN and TP) and >80% removal of cations. However, the addition of 100-200 mg L^-1 mPVC inhibited microalgal growth by 8.8-12.3%. The stress-induced by mPVC was highly observed at 200 mg L^-1 mPVC on the 4th d with 70.8 U mg_prot^-1 and 62.3 nmol mg_prot^-1 of SOD and MDA, respectively. Fourier-transform infrared spectroscopy (FTIR) spectra confirmed that microalgal biomass retained mPVC. Thermogravimetric analysis/derivative thermogravimetric analysis (TGA/DTG) spectra showed that the organic matter of microalgal biomass attached with mPVC was decomposed faster than control, indicating the possibilities of using this biomass for pyrolysis and the formation of bio-products.

In Situ Fluorescent Illumination of Microplastics in Water Utilizing a Combination of Dye/Surfactant and Quenching Techniques

Although plastics have benefited our lives in terms of cost and convenience, the disposal of end-of-life plastics poses environmental problems, such as microplastics (MPs). Although the separation (e.g., filtration) and staining of MPs with fluorescent dye/solvent are generally accepted steps to observe MPs in an environmental matrix, in this study, an in situ selective fluorescent illumination of the MPs in water was attempted with the aid of surfactant. Nonpolar fluorescent dye in combination with surfactant affords nanometer-sized dye particles in water, which adsorb on MPs and penetrate the polymer matrix for effective staining and stable fluorescent behaviors. The effects of different staining parameters, including different dyes, surfactants, staining temperatures, staining times, dye/surfactant ratios, dye/MP ratios, and MP concentrations in aqueous solutions were investigated to better understand staining conditions. More interestingly, non-adsorbed free dye molecules in the staining solution were almost completely fluorescence-quenched by introducing the quenching agent, aniline, while the fluorescence intensity of the stained MP was maintained. By staining MPs with a dye/surfactant combination and subsequently quenching with aniline, in situ selective fluorescent illumination of the MPs in water was successfully achieved, which may eliminate the tedious separation/filtration procedure of MPs to accomplish the quick detection or monitoring of MPs.

Microplastic Contamination in Urban, Farmland and Desert Environments along a Highway in Southern Xinjiang, China

The different types of microplastics (MPs), including debris, fibers, particles, foams, films and others, have become a global environmental problem. However, there is still a lack of research and understanding of the pollution characteristics and main causes of MPs in the arid region of Xinjiang, China. In this survey, we focused on the occurrence and distribution of MPs in urban, farmland and desert areas along a highway in the survey area. Our results showed that the main types of MPs were polypropylene (PP) flakes, polyethylene (PE) films and both PE and PP fragments and fibers. The abundance levels of MPs in street dust of Korla, Alar and Hotan districts equaled 804, 307 and 1526 particles kg−1, respectively, and were positively correlated with the urban population. In farmland areas, there were only two types of MPs (films and fibers), of which the film particles dominated and accounted for 91% of the total on the average. The highest abundance rate of MPs reached 7292 particles kg−1 in the desert area along the highway. The minimum microplastic particle sizes were 51.8 ± 2.2 μm in urban street dust samples, 54.2 ± 5.3 μm in farmland soil samples and 67.8 ± 8.4 μm in samples from along the desert highway. Particle sizes < 500 μm were most common and accounted for 48−91% of the total in our survey. The abundance and shape distribution of the MPs were closely related to the different types of human activities.

Effects of different treatment processes in four municipal wastewater treatment plants on the transport and fate of microplastics

The behavior of microplastics in wastewater treatment plants has been investigated, but specific effects of treatment process on microplastics' fate are still unclear due to varied analysis methods and regional differences. In this study, four wastewater treatment plants in Ningbo of southeastern China with different treatment processes were selected to investigate transport and fate of microplastics. Based on number of microplastic particles, fibers and fragments were the main microplastics types in wastewater, while synthetic cellulose represented the largest fraction. The dominance of fibers (76.7%-90.0%) and small particle sizes (<2.0 mm, 62.5%-81.5%) in effluents suggested that they escaped easily from the wastewater treatment plants. The abundance of microplastics particles decreased from 78.0 ± 2.9 items/L in influent to 6.0 ± 2.8 items/L in effluent for anaerobic-anoxic-oxic process, 100.0 ± 3.1 items/L to 4.3 ± 3.4 items/L for sequencing batch reactor activated sludge process, 105.0 ± 5.3 items/L to 3.5 ± 2.6 items/L for cyclic activated sludge technology, 65.0 ± 4.3 items/L to 3.0 ± 1.6 items/L for oxidation ditch process. The microplastics removal capacity of primary and secondary treatment processes for four wastewater treatment plants ranged from 83.7% to 96.3%. Application of different tertiary treatment processes (coagulation/flocculation, membrane related technology and disinfection) enhanced microplastics removal to achieve overall removal rate of 92.3%-96.7%. The removed microplastics from the wastewater treatment plants were mainly transferred to sludge (226.1 ± 95.7-896.0 ± 144.0 items/g dry weight). The biological treatment unit played an important role in microplastics removal with rates varying between 86.9%-95.2%, while tertiary treatment reduced daily microplastics emission 1.4 × 10⁸-2.3 × 10⁸ items/day. This study suggests that proper selection of wastewater treatment unit could significantly reduce the emission number of microplastics, which supports an efficient control strategy of microplastics in wastewater treatment plants.

An overview of the effects of nanoplastics on marine organisms

The ubiquity and detrimental effects of plastics in the environment have become global environmental concerns over the past decade. Intensive anthropogenic activities, such as urbanisation, industrialisation and increasing population density, have resulted in increased plastic pollution in the environment. Recently, nanoplastics have received increased research attention and concern because of their potential adverse effects on marine organisms. However, the potential ecological issues associated with nanoplastics are not yet fully understood because of the insufficient and limited research conducted to date on baseline data, exposure and associated risks for marine organisms. This review highlights an understanding of the nature and characteristics of nanoplastics, as well as the occurrence of nanoplastics in the marine environment. In the future, the effects of nanoplastics on marine organisms may directly or indirectly influence human health. Thus, this review also highlights the effects of nanoplastics on marine organisms. An overview and insights into the occurrence of nanoplastics in marine environments and their potential effects on marine organisms will facilitate the preventative interventions and measures of nanoplastics pollution in the marine environment.

Extraction and Characterization of Microplastics from Portuguese Industrial Effluents

Microplastics (MPs) are contaminants present in the environment. The current study evaluates the contribution of different well-established industrial sectors in Portugal regarding their release of MPs and potential contamination of the aquifers. For each type of industry, samples were collected from wastewater treatment plants (WWTP), and different parameters were evaluated, such as the potential contamination sources, the concentration, and the composition of the MPs, in both the incoming and outcoming effluents. The procedures to extract and identify MPs in the streams entering or leaving the WWTPs were optimized. All industrial effluents analysed were found to contribute to the increase of MPs in the environment. However, the paint and pharmaceutical activities were the ones showing higher impact. Contrary to many reports, the textile industry contribution to aquifers contamination was not found to be particularly relevant. Its main impact is suggested to come from the numerous washing cycles that textiles suffer during their lifetime, which is expected to strongly contribute to a continuous release of MPs. The predominant chemical composition of the isolated MPs was found to be polyethylene terephthalate (PET). In 2020, the global need for PET was 27 million tons and by 2030, global PET demand is expected to be 42 million tons. Awareness campaigns are recommended to mitigate MPs release to the environment and its potential negative impact on ecosystems and biodiversity.

The distribution and risk of microplastics discharged from sewage treatment plants in terrestrial and aquatic compartment

Many microplastics (MPs) were produced in daily life, which would enter sewage treatment plants (STPs) with the wastewater. Although the STPs has a good interception effect on these MPs, there will still be a part of MPs entering the environment with the effluent and sludge treatment, causing a certain ecological risk. This study investigated the abundance, characteristics and retention of MPs in different STPs, as well as the ecological risks caused by MPs entering the environment. The abundance of MPs in influent and effluent was ranged from 2.02 to 2.50 items L^-1 and 0.27-0.48 items L^-1, respectively. The abundance of MPs in dewatered sludge and sediment of Lake Dianchi was ranged from 3.719-6.949 × 10³ items (kg Ds)^-1 and 1.84-5.23 × 10³ items (kg Ds)^-1, respectively. So roughly 80% of the MPs were trapped and transferred into the dewatered sludge. The observed colors of MPs were transparent, black, blue, red, pale brown, green and gray, and their main species were polypropylene (PP) and polyethylene (PE). To further evaluate the ecological risks of MPs, the oyster mushroom was cultivated in a medium supplemented with MPs. It was found that MPs could be absorbed by oyster mushrooms with a 7-11% of absorption rate, the fibers were widely distributed in the stipes and the pileus. This study had theoretical significance for exploring the distribution of MPs in STPs and clarifying the ecological risk posed by MPs in the environment.