One-pot synthesis of protein-embedded metal-organic frameworks with enhanced biological activities

Iodide/metal-organic frameworks (MOF) -mediated signal amplification strategy for the colorimetric detection of H2O2, Cr2O72- and H2S

The analytical methods based on colorimetric detection of various analytes have attracted intensive interest. However, most of them display relatively low sensitivity. Herein, a novel colorimetric strategy based on iodide/metal-organic frameworks (MOF)-mediated amplification was developed for low-cost, naked-eye detection and quantification of H₂O₂,Cr₂O₇^2-, and H₂S. Cu-MOFs could catalyze the oxidation of the colorless peroxidase substrate TMB to produce a blue product. The published researches mainly focused on the immobilization or integration of a macromolecule, such as natural enzymes, to enhance MOFs catalytic abilities. The use of small molecules to improve the catalytic performance of MOFs has rarely reported. Due to the negligible steric hindrance, iodide could easily be adsorbed in the framework pore of MOFs to conduct the synergic catalytic effect, and shows a high catalytic effect. As a result, the catalytic activity of Cu-MOFs was dramatically enhanced, and thus, the nanocatalyst could act as an amplifier system for target detection. The detection limits obtained by the amplified method are 25, 30, and 0.2 nM, respectively, which are about 200-fold lower than that of the unamplified colorimetric assays. The colorimetric strategy developed herein provides a novel system for the detection of low concentrations of analytes in complex biological samples.

A New One-Pot Way to Prepare Enzyme-Containing Coordination Polymers by Sonochemistry

Enzyme-containing Coordination Polymers (CPs) were prepared by a one-pot sonochemical method, mixing Glucose Oxidase (GOx) enzyme, 4,4'-bipyridine as spacer ligand, and chloride zinc salt. The reaction took place in a very short time (a few minutes) with a minimum use of solvents compared to conventional methods. The obtained composite material, named GOx-[Zn(4,4'-bipy)Cl₂]_∞, resulted from embedding the GOx molecules into uniformly sized [Zn(4,4'-bipy)Cl₂] nanocrystals. The structural and thermal characterization, confirmed that the adopted strategy allows the preparation of hybrid bio-nanomaterials in a very fast, facile and eco-friendly method, by simply synthesising the [Zn(4,4'-bipy)Cl₂] nanocrystals in the presence of the enzyme.

Recyclable laccase by coprecipitation with aciduric Cu-based MOFs for bisphenol A degradation in an aqueous environment

Copper-based MOF (Cu-PABA) was selected to immobilize laccase (Lac) at optimum pH because of its favorable acid resistance. Cu-PABA@Lac biocomposites were synthesized in situ by the one-step method under moderate conditions (water environment and normal temperature and pressure). Cu-PABA@Lac had great potential to maintain stability due to the protection of the Cu-PABA shell and reasonable conformational changes. In addition, Cu-PABA@Lac could be used repeatedly by centrifugation, as confirmed in the degradation experiment of bisphenol A (BPA). Because of the synergistic effect of copper ions between laccase and Cu-PABA, the K_m value decreased (from 0.0024 to 0.0014 mM); therefore, the affinity between laccase and guaiacol was enhanced. In conclusion, the system provides a choice for immobilized acid-resistant enzymes and a solution for environmental BPA degradation.

Enhanced Water Permeability and Antifouling Property of Coffee-Ring-Textured Polyamide Membranes by In Situ Incorporation of a Zwitterionic Metal-Organic Framework

Modulation of the polyamide structure is critically important for the reverse-osmosis performance of thin-film composite (TFC) membranes in the field of water reuse and desalination. Herein, zwitterionic nanoparticles of zeolitic imidazolate framework-8 (PZ@ZIF-8) were fabricated and incorporated into the polyamide active layer through the interfacial polymerization method. A hydrophilic, zwitterionic coffee-ring structure was formed on the surface of polyamide thin-film nanocomposite (TFN) membranes due to the adjusted diffusion rate of m-phenylenediamine (MPD) from the aqueous phase into the organic phase during the interfacial polymerization process. Surface characterization demonstrated that the coffee-ring structure increased the amounts of water transport channels on the membrane surface and the intrinsic pores of PZ@ZIF-8 maintained the salt rejection. Antifouling and bactericidal activities of TFN membranes were enhanced remarkably owing to the bacterial-"defending" and bacterial-"attacking" behaviors of hydrophilic and zwitterionic groups from PZ@ZIF-8 nanoparticles. This work would provide a promising method for the application of MOFs to enhance the bio-/organic-fouling resistance of TFN membranes with high water permeation and salt rejection.

Target Reprogramming Lysosomes of CD8+ T Cells by a Mineralized Metal-Organic Framework for Cancer Immunotherapy

T cell immunotherapy holds significant challenges in solid tumors, mainly due to the T cells' low activation and the decreased synthesis-release of therapeutic proteins, including perforin and granzyme B, which are present in lysosomes. In this study, a lysosome-targeting nanoparticle (LYS-NP) is developed by way of a mineralized metal-organic framework (MOF) coupled with a lysosome-targeting aptamer (CD63-aptamer) to enhance the antitumor effect of T cells. The MOF synthesized from Zn²⁺ and dimethylimidazole has good protein encapsulation and acid sensitivity, and is thus an ideal lysosomal delivery vector. Calcium carbonate (CaCO₃ ) is used to induce MOF mineralization, improve the composite material's stability in encapsulating therapeutic protein, and provide calcium ions with synergistic effects. Before mineralization, perforin and granzyme B-T cell-needed therapeutic proteins for tumors-are preloaded with the MOF. Moreover, T cells are pretreated with processed tumor-specific antigens to activate or produce memory before reprogramming the lysosomes, facilitating the T cell receptor (TCR) for release of the therapeutic proteins. Using T cells recombined by LYS-NPs, a significant enhancement of breast cancer control is confirmed.

Immobilization of GH78 α-L-Rhamnosidase from Thermotoga petrophilea with High-Temperature-Resistant Magnetic Particles Fe3O4-SiO2-NH2-Cellu-ZIF8 and Its Application in the Production of Prunin Form Naringin

To efficiently recycle GH78 thermostable rhamnosidase (TpeRha) and easily separate it from the reaction mixture and furtherly improve the enzyme properties, the magnetic particle Fe₃O₄-SiO₂-NH₂-Cellu-ZIF8 (FSNcZ8) was prepared by modifying Fe₃O₄-NH₂ with tetraethyl silicate (TEOS), microcrystalline cellulose and zinc nitrate hexahydrate. FSNcZ8 displayed better magnetic stability and higher-temperature stability than unmodified Fe₃O₄-NH₂ (FN), and it was used to adsorb and immobilize TpeRha from Thermotoga petrophilea 13995. As for properties, FSNcZ8-TpeRha showed optimal reaction temperature and pH of 90°C and 5.0, while its highest activity approached 714 U/g. In addition, FSNcZ8-TpeRha had better higher-temperature stability than FN. After incubation at 80°C for 3 h, the residual enzyme activities of FSNcZ8-TpeRha, FN-TpeRha and free enzyme were 93.5%, 63.32%, and 62.77%, respectively. The organic solvent tolerance and the monosaccharides tolerance of FSNcZ8-TpeRha, compared with free TpeRha, were greatly improved. Using naringin (1 mmol/l) as the substrate, the optimal conversion conditions were as follows: FSNcZ8-TpeRha concentration was 6 U/ml; induction temperature was 80°C; the pH was 5.5; induction time was 30 min, and the yield of products was the same as free enzyme. After repeating the reaction 10 times, the conversion of naringin remained above 80%, showing great improvement of the catalytic efficiency and repeated utilization of the immobilized α-L-rhamnosidase.

Performance Fabrics Obtained by In Situ Growth of Metal-Organic Frameworks in Electrospun Fibers

Metal-organic frameworks (MOFs) exhibit an exceptional surface area-to-volume ratio, variable pore sizes, and selective binding, and hence, there is an ongoing effort to advance their processability for broadening their utilization in different applications. In this work, we demonstrate a general scheme for fabricating freestanding MOF-embedded polymeric fibers, in which the fibers themselves act as microreactors for the in situ growth of the MOF crystals. The MOF-embedded fibers are obtained via a two-step process, in which, initially, polymer solutions containing the MOF precursors are electrospun to obtain microfibers, and then, the growth of MOF crystals is initiated and performed via antisolvent-induced crystallization. Using this approach, we demonstrate the fabrication of composite microfibers containing two types of MOFs: copper (II) benzene-1,3,5-tricarboxylic acid (HKUST-1) and zinc (II) 2-methylimidazole (ZIF-8). The MOF crystals grow from the fiber's core toward its outer rims, leading to exposed MOF crystals that are well rooted within the polymer matrix. The MOF fibers obtained using this method can reach lengths of hundreds of meters and exhibit mechanical strength that allows arranging them into dense, flexible, and highly durable nonwoven meshes. We also examined the use of the MOF fiber meshes for the immobilization of the enzymes catalase and horse radish peroxidase (HRP), and the enzyme-MOF fabrics exhibit improved performance. The MOF-embedded fibers, demonstrated in this work, hold promise for different applications including separation of specific chemical species, selective catalysis, and sensing and pave the way to new MOF-containing performance fabrics and active membranes.

Silica Capsules Templated from Metal-Organic Frameworks for Enzyme Immobilization and Catalysis

Inspired by the unique biological microenvironments of eukaryotic cells, hollow capsules are promising to immobilize enzymes due to their advantages for physical protection and improved activity of enzymes. Herein, we report a facile method to fabricate silica (SiO₂) capsules using zeolitic imidazole framework-8 nanoparticles (ZIF-8 NPs) as templates for enzyme immobilization and catalysis. Enzyme-encapsulated SiO₂ capsules are obtained by encapsulation of enzymes in ZIF-8 NPs and subsequent coating of silica layers, followed by the removal of templates in a mild condition (i.e., ethylenediaminetetraacetic acid (EDTA) solution). The enzyme (i.e., horseradish peroxidase, HRP) activity in SiO₂ capsules is improved more than 15 times compared to that of enzyme-loaded ZIF-8 NPs. Enzymes in SiO₂ capsules maintain a high relative activity after being subjected to high temperature, enzymolysis, and recycling compared to free enzymes. In addition, multienzymes (e.g., glucose oxidase and HRP) can also be coencapsulated within SiO₂ capsules to show a reaction with a high cascade catalytic efficacy. This work provides a versatile strategy for enzyme immobilization and protection with potential applications in biocatalysis.

Polymer-Coated NH2-UiO-66 for the Codelivery of DOX/pCRISPR

Herein, the NH₂-UiO-66 metal organic framework (MOF) has been green synthesized with the assistance of high gravity to provide a suitable and safe platform for drug loading. The NH₂-UiO-66 MOF was characterized using a field-emission scanning electron microscope, transmission electron microscope (TEM), X-ray diffraction, and zeta potential analysis. Doxorubicin was then encapsulated physically on the porosity of the green MOF. Two different stimulus polymers, p(HEMA) and p(NIPAM), were used as the coating agents of the MOFs. Doxorubicin was loaded onto the polymer-coated MOFs as well, and a drug payload of more than 51% was obtained, which is a record by itself. In the next step, pCRISPR was successfully tagged on the surface of the modified MOFs, and the performance of the final nanosystems were evaluated by the GFP expression. In addition, successful loadings and internalizations of doxorubicin were investigated via confocal laser scanning microscopy. Cellular images from the HeLa cell line for the UiO-66@DOX@pCRISPR and GMA-UiO-66@DOX@pCRISPR do not show any promising and successful gene transfections, with a maximum EGFP of 1.6%; however, the results for the p(HEMA)-GMA-UiO-66@DOX@pCRISPR show up to 4.3% transfection efficiency. Also, the results for the p(NIPAM)-GMA-UiO-66@DOX@pCRISPR showed up to 6.4% transfection efficiency, which is the first and superior report of a MOF-based nanocarrier for the delivery of pCRISPR. Furthermore, the MTT assay does not shown any critical cytotoxicity, which is a promising result for further biomedical applications. At the end of the study, the morphologies of all of the nanomaterials were screened after drug and gene delivery procedures and showed partial degradation of the nanomaterial. However, the cubic structure of the MOFs has been shown in TEM, and this is further proof of the stability of these green MOFs for biomedical applications.

Metal-Organic Frameworks for Liquid Phase Applications

In the last two decades, metal-organic frameworks (MOFs) have attracted overwhelming attention. With readily tunable structures and functionalities, MOFs offer an unprecedentedly vast degree of design flexibility from enormous number of inorganic and organic building blocks or via postsynthetic modification to produce functional nanoporous materials. A large extent of experimental and computational studies of MOFs have been focused on gas phase applications, particularly the storage of low-carbon footprint energy carriers and the separation of CO2-containing gas mixtures. With progressive success in the synthesis of water- and solvent-resistant MOFs over the past several years, the increasingly active exploration of MOFs has been witnessed for widespread liquid phase applications such as liquid fuel purification, aromatics separation, water treatment, solvent recovery, chemical sensing, chiral separation, drug delivery, biomolecule encapsulation and separation. At this juncture, the recent experimental and computational studies are summarized herein for these multifaceted liquid phase applications to demonstrate the rapid advance in this burgeoning field. The challenges and opportunities moving from laboratory scale towards practical applications are discussed.

Encapsulation of bacterial cells in cytoprotective ZIF-90 crystals as living composites

Exploiting metal-organic frameworks (MOFs) as selectively permeable shelters for encapsulating engineered cells to form hybrid living materials has attracted increasing attention in recent years. Optimizing the synthesis process to improve encapsulation efficiency (EE) is critical for further technological development and applications. Here, using ZIF-90 and genetically engineered Escherichia coli (E. coli) as a demo, we fabricated E. coli@ZIF-90 living composites in which E. coli cells were encapsulated in ZIF-90 crystals. We illustrated that ZIF-90 could serve as a protective porous cage for cells to shield against toxic bactericides including benzaldehyde, cinnamaldehyde, and kanamycin. Notably, the E. coli cells remained alive and could self-reproduce after removing the ZIF-90 crystal cages in ethylenediaminetetraacetic acid, suggesting a feasible route for protecting and prolonging the lifespan of bacterial cells. Moreover, an aqueous multiple-step deposition approach was developed to improve EE of the E. coli@ZIF-90 composites: the EE increased to 61.9 ± 5.2%, in contrast with the efficiency of the traditional method (21.3 ± 4.4%) prepared with PBS buffer. In short, we develop a simple yet viable strategy to manufacture MOF-based living hybrid materials that promise new applications across diverse fields.

New frontiers and prospects of metal-organic frameworks for removal, determination, and sensing of pesticides

Pesticides have been widely used in agriculture to control, reduce, and kill insects. Humans are also being using pesticides to control insidious animals in daily life. By these practices, a huge volume of pesticides is introduced to the environment. Despite broad-spectrum applicability, pesticides also have hazardous effects on both humans and animals at high and low concentrations. Long-term exposure to pesticides can cause different diseases, like leukemia, lymphoma, and cancers of the brain, breasts, prostate, testis, and ovaries. Reproductive disorders from pesticides include birth defects, stillbirth, spontaneous abortion, sterility, and infertility. Therefore, the application of determination and treatment methods for pre-concentration and removal of these toxic materials from the environment appears a vital concern. To date, different materials and approaches have been employed for these purposes. Among these approaches, multifunctional metal-organic frameworks (MOFs)-assisted adsorption and determination processes have always been in the spotlight. These facts are due to exclusive properties of MOFs in terms of the crystallinity, large surface area, high chemical, and physical stability, and controllable structure as well as unique features of adsorption and determination process in terms of simple, easy, cheap, available method and ability to use in large and industrial scales. In the present work, we illustrate the exceptional features of MOFs as well as the possible mechanism for the adsorption of pesticides by MOFs. The use of these fantastic materials for pre-concentration and removal of pesticides are extensively explored. In addition, the performance of MOFs was compared with other adsorbents. Finally, the new frontiers and prospects of MOFs for the determination, sensing, and removal of pesticides are presented.

Dual stimuli-responsive metal-organic framework-based nanosystem for synergistic photothermal/pharmacological antibacterial therapy

The serious threat of drug-resistant bacterial pathogens has arisen through overuse of antibiotics. Photothermal therapy (PTT) has come to prominence as viable alternative strategy for antibacterial therapy. In this work, we report a NIR/pH dual stimuli-responsive antibacterial formulation based on zeolitic imidazolate frameworks-8 (ZIF-8) with strong antibacterial activity that combines photothermal heating with enhanced antibiotic delivery. ZIF-8 with polydopamine (PDA) surface modification was used to encapsulate the antibiotic vancomycin to construct a dual stimuli-responsive antimicrobial formulation (Van@ZIF-8@PDA). This treatment was tested against Gram-positive Mu50 (a vancomycin-intermediate S. aureus reference strain). Results showed that the PDA coating improved ZIF-8 stability and dispersion, while also conferring a high photothermal conversion efficiency. Hyperthermia activated by near-infrared (NIR) light irradiation, in conjunction with pH-dependent nanoparticle degradation to release vancomycin, enabled tight control of drug delivery that functioned synergistically in the elimination of both planktonic bacteria prior to biofilm formation and established biofilms. We found that this combined formulation compromises cell structure while also degrading bacterial DNA. Moreover, further investigation showed that the Van@ZIF-8@PDA nanoparticles exhibit good biocompatibility, with low toxicity toward host organs and tissues, while also reducing the antibiotic concentration needed for effective bacterial control. Finally, we treated Mu50 in a mouse model of skin abscess and found that Van@ZIF-8@PDA was effective and safe in vivo. Cumulatively, this study shows that this NIR/pH dual stimuli-responsive nanoparticle-based formulation offers a promising potential strategy for clinical application against bacterial infection that circumvents antibiotic resistance.

Fragmented α-Amylase into Microporous Metal-Organic Frameworks as Bioreactors

This work presents an efficient and facile strategy to prepare an α-amylase bioreactor. As enzymes are quite large to be immobilized inside metal-organic frameworks (MOFs), the tertiary and quaternary structures of α-amylase were first disrupted using a combination of urea, dithiothreitol (DTT), and iodoacetamide (IAA). After losing its tertiary structure, the unfolded proteins can now penetrate into the microporous MOFs, affording fragmented α-amylase@MOF bioreactors. Among the different MOFs evaluated, UiO-66 gave the most promising potential due to the size-matching effect of the α-helix of the fragmented α-amylase with the pore size of UiO-66. The prepared bioreactor exhibited high yields of small carbohydrate (maltose) even when reused up to 15 times (>80% conversion).

Fast multipoint immobilization of lipase through chiral L-proline on a MOF as a chiral bioreactor

In this paper, we describe the facile preparation of a chiral catalyst by the combination of the amino acid, l-proline (Pro), and the enzyme, porcine pancreas lipase (PPL), immobilized on a microporous metal-organic framework (PPL-Pro@MOF). The multipoint immobilization of PPL onto the MOF is made possible with the aid of Pro, which also provided a chiral environment for enhanced enantioselectivity. The application of the microporous MOF is pivotal in maintaining the catalytic activity of PPL, wherein it prevented the leaching of Pro during the catalytic reaction, leading to the enhanced activity of PPL. The prepared biocatalyst was applied in asymmetric carbon-carbon bond formation, demonstrating the potential of this simple approach for chemical transformations.

Enzyme Catalyst Engineering toward the Integration of Biocatalysis and Chemocatalysis

Enzymatic catalysis, which has been driving biological processes in a green, mild, and efficient manner for billions of years, is increasingly being used in industrial processes to manufacture chemicals, pharmaceuticals, and materials for human society. Since enzymes were discovered, strategies to adapt enzymes for use as catalysts for industrial processes, such as chemical modification, immobilization, site-directed mutagenesis, directed evolution of enzymes, artificial metalloenzymes, and computational design, have been continuously pursued. In contrast to these strategies, editing enzymes to easily integrate biocatalysis with chemocatalysis is a potential way to apply enzymes in industry. Enzyme catalyst editing focuses on fine-tuning the microenvironment surrounding the enzyme or achieving a new catalytic function to construct better biocatalysis under non-natural conditions for the enzyme.

Calix[4]arene tetracarboxylic acid-treated lipase immobilized onto metal-organic framework: Biocatalyst for ester hydrolysis and kinetic resolution

Metal organic frameworks (MOFs) are hybrid organic inorganic materials with unique properties such as well-defined pore structure, extremely high surface area, excellent chemical-thermal stability. MOFs-based constructs have been extensively engineered and used for applications, such as enzyme immobilization for bio-catalysis. To obtained a zeolitic imidazole framework-8 (ZIF-8) for enzyme immobilization, Candida rugosa lipase (CRL) was pretreated with calix [4]arene tetracarboxylic acid (Calix) and reacted with Zn and imidazole by co-precipitation method. The prepared biocomposite was characterized by SEM, EDX, FT-IR, and XRD. The prepared CRL@Calix-ZIF-8 with high encapsulation efficiency showed improved resistance to alkali and thermal conditions. The CRL@Calix-ZIF-8 with the biocatalytic activity was 2-folds higher than that of the CRL@ZIF-8 (without Calix). The free lipase lost its catalytic activity completely at 60 °C after 100 min, while the CRL@Calix-ZIF-8 and CRL@ZIF-8 retained about 84% and 73%. It was found that CRL@Calix-ZIF-8 and CRL@ZIF-8 still retained ~83 and 67% of catalytic activity after its 6th use, respectively. The kinetic resolution of the immobilized lipases was examined for enantioselective hydrolysis of racemic naproxen methyl ester. CRL@Calix-ZIF-8 showed enantioselectivity against the racemic naproxen methyl ester, with E = 183 and 131 compared to the CRL@ZIF-8.

Immobilized lipases-based nano-biocatalytic systems - A versatile platform with incredible biotechnological potential

Lipases belong to α/β hydrolases that cause hydrolytic catalysis of triacylglycerols to release monoacylglycerols, diacylglycerols, and glycerol with free fatty acids. Lipases have a common active site that contains three amino acid residues in a conserved Gly-X-Ser-X-Gly motif: a nucleophilic serine residue, an acidic aspartic or glutamic acid residue, and a basic histidine residue. Lipase plays a significant role in numerous industrial and biotechnological processes, including paper, food, oleochemical and pharmaceutical applications. However, its instability and aqueous solubility make application expensive and relatively challenging. Immobilization has been considered as a promising approach to improve enzyme stability, reusability, and survival under extreme temperature and pH environments. Innumerable supporting material in the form of natural polymers and nanostructured materials is a crucial aspect in the procedure of lipase immobilization used to afford biocompatibility, stability in physio-chemical belongings, and profuse binding positions for enzymes. This review outlines the unique structural and functional properties of a large number of polymers and nanomaterials as robust support matrices for lipase immobilization. Given these supporting materials, the applications of immobilized lipases in different industries, such as biodiesel production, polymer synthesis, additives, detergent, textile, and food industry are also discussed.

Three-dimensional ordered magnetic macroporous metal-organic frameworks for enzyme immobilization

Metal-organic frameworks (MOFs) have been emerged as a promising support for immobilizing enzymes owing to the tunable porosity, high surface area, and structural diversity. However, most of these possess nanometer size and small pores, which are difficult to recover them from the reaction medium and present low immobilization efficiency and protein loading capacity, and high substrate diffusion limitations. Herein, a novel magnetic amino-functionalized zeolitic imidazolate framework-8 (ZIF-8) with 3D highly ordered macroporous structure was synthesized using the assembled polystyrene (PS) nanosphere monoliths as a template. Subsequently, catalase (CAT) molecules were immobilized on the surface of macroporous magnetic ZIF-8 and inside the macropores by precipitation, covalent binding and cross-linking. The resultant immobilized CAT showed high immobilization efficiency (58%) and protein loading capacity (29%), leading to 500% higher activity than the immobilized CAT on ZIF-8 (CAT/ZIF-8). Meanwhile, the immobilized CAT could be easily recovered with a magnet without obvious activity loss. The traditional CAT/ZIF-8 lost its activity after 6 cycles, whereas, the immobilized CAT retained 90% activity of its initial activity after reusing for 8 cycles, indicating excellent reusability. In conclusion, this study provides a facile and efficient approach to immobilize enzymes on/in MOFs with enhanced activity and excellent recyclability.

Development of MOF "Armor-Plated" Phycocyanin and Synergistic Inhibition of Cellular Respiration for Hypoxic Photodynamic Therapy in Patient-Derived Xenograft Models

Significant progress has been made in the use of phycocyanin (PC) as a photosensitizer (PS) agent for photodynamic therapy (PDT). The clinical use of PC, however, has been limited by its poor stability, unfavorable pharmacokinetics, limited tumor cell uptake, and the hypoxic nature of the tumor microenvironment. In this study, a novel biomimetic mineralization approach is described for encapsulating PC using zeolitic imidazolate framework-8 (ZIF-8), after which MPEG₂₀₀₀ -COOH is further utilized as an anchor on the ZIF/PC complex in order to yield MPEG₂₀₀₀ -ZIF/PC composites (PMs). These PMs are then used as a stable reinforced PS for PDT, effectively improving the intracellular delivery of this protein PS. In contrast to prior studies that have sought to overcome intratumoral hypoxia via increasing oxygen delivery to the tumor site, the mitochondrial complex I inhibitor papaverine (PPV) is instead utilized to reduce intratumor oxygen consumption in an effort to augment the PDT efficacy of the PMs. It is found that this combination treatment strategy markedly improves the antitumor properties of these PMs both in vitro and in patient-derived xenograft (PDX) models without inducing significant side effects. It is therefore proposed that the "armor-plating" of protein PS agents with ZIF-8 in combination with PPV may be a promising approach to precision medicine-mediated tumor treatment.

Versatile Nanoscale Metal-Organic Frameworks (nMOFs): An Emerging 3D Nanoplatform for Drug Delivery and Therapeutic Applications

For decades, nanoscale metal-organic frameworks (nMOFs) have attracted extensive interest in biomedicine due to their distinct characteristics, including facile synthesis, porous interior, and tunable biocompatibility. With high porosity, versatile nMOFs allow for the facile encapsulation of various therapeutic agents with exceptionally high payloads. Constructed from metal ions and organic linkers through coordination bonds, nMOFs with plentiful functional groups enable the surface modification for active targeting and enhanced biocompatibility. This review outlines the up-to-date progresses on the exploration of nMOFs in the field of biomedicine. First, the classification and synthesis of nMOFs are discussed, followed by the concrete introduction of drug loading strategies of nMOFs and mechanisms of stimulation-responsive drug release. Second, the smart designs of the nMOFs-based platforms for anticancer and antibacterial treatment are summarized. Finally, the basic challenges faced by nMOFs research and the great potential of biomimetic nMOFs are presented. This review article affords an inspiring insight into the interdisciplinary research of nMOFs and their biomedical applications, which holds great expectation for their further clinical translation.

Coordination-based self-assembled capsules (SACs) for protein, CRISPR-Cas9, DNA and RNA delivery

Biologics, such as functional proteins and nucleic acids, have recently dominated the drug market and comprise seven out of the top 10 best-selling drugs. Biologics are usually polar, heat sensitive, membrane impermeable and subject to enzymatic degradation and thus require systemic routes of administration and delivery. Coordination-based delivery vehicles, which include nanosized extended metal-organic frameworks (nMOFs) and discrete coordination cages, have gained a lot of attention because of their remarkable biocompatibility, in vivo stability, on-demand biodegradability, high encapsulation efficiency, easy surface modification and moderate synthetic conditions. Consequently, these systems have been extensively utilized as carriers of biomacromolecules for biomedical applications. This review summarizes the recent applications of nMOFs and coordination cages for protein, CRISPR-Cas9, DNA and RNA delivery. We also highlight the progress and challenges of coordination-based platforms as a promising approach towards clinical biomacromolecule delivery and discuss integral future research directions and applications.

Hierarchically Porous Biocatalytic MOF Microreactor as a Versatile Platform towards Enhanced Multienzyme and Cofactor-Dependent Biocatalysis

Metal-organic frameworks (MOFs) have recently emerged as excellent hosting matrices for enzyme immobilization, offering superior physical and chemical protection for biocatalytic reactions. However, for multienzyme and cofactor-dependent biocatalysis, the subtle orchestration of enzymes and cofactors is largely disrupted upon immobilizing in the rigid crystalline MOF network, which leads to a much reduced biocatalytic efficiency. Herein, we constructed hierarchically porous MOFs by controlled structural etching to enhance multienzyme and cofactor-dependent enzyme biocatalysis. The expanded size of the pores can provide sufficient space for accommodated enzymes to reorientate and spread within MOFs in their lower surface energy state as well as to decrease the inherent barriers to accelerate the diffusion rate of reactants and intermediates. Moreover, the developed hierarchically porous MOFs demonstrated outstanding tolerance to inhospitable surroundings and recyclability.

Recent Advances in the Design and Sensing Applications of Hemin/Coordination Polymer-Based Nanocomposites

The fabrication of biomimetic catalysts as substituents for enzymes is of critical interest in the field due to the problems associated with the extraction, purification, and storage of enzymes in sensing applications. Of these mimetics, hemin/coordination polymer-based nanocomposites, mainly hemin/metal-organic frameworks (MOF), have been developed for various biosensing applications because of the unique properties of each component, while trying to mimic the normal biological functions of heme within the protein milieu of enzymes. This critical review first discusses the different catalytic functions of heme in the body in the form of enzyme/protein structures. The properties of hemin dimerization are then elucidated with the supposed models of hemin oxidation. After that, the progress in the fabrication of hemin/MOF nanocomposites for the sensing of diverse biological molecules is discussed. Finally, the challenges in developing this type of composites are examined as well as possible proposals for future directions to enhance the sensing performance in this field further.

Sustained and targeted delivery of checkpoint inhibitors by metal-organic frameworks for cancer immunotherapy

The major impediments to the implementation of cancer immunotherapies are the sustained immune effect and the targeted delivery of these therapeutics, as they have life-threatening adverse effects. In this work, biomimetic metal-organic frameworks [zeolitic imidazolate frameworks (ZIFs)] are used for the controlled delivery of nivolumab (NV), a monoclonal antibody checkpoint inhibitor that was U.S. Food and Drug Administration-approved back in 2014. The sustained release behavior of NV-ZIF has shown a higher efficacy than the naked NV to activate T cells in hematological malignancies. The system was further modified by coating NV-ZIF with cancer cell membrane to enable tumor-specific targeted delivery while treating solid tumors. We envisage that such a biocompatible and biodegradable immunotherapeutic delivery system may promote the development and the translation of hybrid superstructures into smart and personalized delivery platforms.

Hierarchically porous magnetic Fe3O4/Fe-MOF used as an effective platform for enzyme immobilization: a kinetic and thermodynamic study of structure–activity

Fe₃O₄/Fe-MOF integrate magnetic characteristics and hierarchical porous structure for supporting chloroperoxidase (CPO) or horseradish peroxidase (HRP).

Tailored Mesoporous Inorganic Biomaterials: Assembly, Functionalization, and Drug Delivery Engineering

Infectious or immune diseases have caused serious threat to human health due to their complexity and specificity, and emerging drug delivery systems (DDSs) have evolved into the most promising therapeutic strategy for drug-targeted therapy. Various mesoporous biomaterials are exploited and applied as efficient nanocarriers to loading drugs by virtue of their large surface area, high porosity, and prominent biocompatibility. Nanosized mesoporous nanocarriers show great potential in biomedical research, and it has become the research hotspot in the interdisciplinary field. Herein, recent progress and assembly mechanisms on mesoporous inorganic biomaterials (e.g., silica, carbon, metal oxide) are summarized systematically, and typical functionalization methods (i.e., hybridization, polymerization, and doping) for nanocarriers are also discussed in depth. Particularly, structure-activity relationship and the effect of physicochemical parameters of mesoporous biomaterials, including morphologies (e.g., hollow, core-shell), pore textures (e.g., pore size, pore volume), and surface features (e.g., roughness and hydrophilic/hydrophobic) in DDS application are overviewed and elucidated in detail. As one of the important development directions, advanced stimuli-responsive DDSs (e.g., pH, temperature, redox, ultrasound, light, magnetic field) are highlighted. Finally, the prospect of mesoporous biomaterials in disease therapeutics is stated, and it will open a new spring for the development of mesoporous nanocarriers.

The state of the field: from inception to commercialization of metal–organic frameworks

We provide a brief overview of the state of the MOF field from their inception to their synthesis, potential applications, and finally, to their commercialization.

Iron-Mineralization-Induced Mesoporous Metal-Organic Frameworks Enable High-Efficiency Synergistic Catalysis of Natural/Nanomimic Enzymes

Metal-organic frameworks (MOFs) have become a promising accommodation for enzyme immobilization and protection. However, the integration of multienzymes into MOFs may result in compromise of individual enzymatic activity. In this work, we report an iron mineralization strategy to facilely construct a mesoporous MOF, possessing excellent peroxidase-mimic bioactivity. Furthermore, the feasibility of in situ encapsulating natural enzymes within the developed mesoporous MOF nanozymes endows these natural/nanomimic enzyme hybrids with remarkably enhanced synergistic catalysis ability. Such activity enhancement is mainly due to (1) the fast flux rate of substances through the interconnected mesoporous channels and (2) the simultaneously increased loading amount of enzymes and iron within the MOFs caused by the iron mineralization process.

Aqueous core and hollow silica nanocapsules for confined enzyme modules

The development of enzyme modules by coupling several enzymes in confinement is of paramount importance to artificial biological reaction systems for efficient enzymatic reactions. Silica nanocapsules are ideal candidates for loading enzymes. Aqueous core silica nanocapsules have relatively been rarely reported due to the crux of difficulty in forming dense silica shells by interfacial sol-gel reactions. Herein we suggest a one-step synthesis of hollow silica nanocapsules with an aqueous core containing enzymes via a template-free and interfacial condensation method for developing enzyme modules with coupled enzymatic reactions. As a proof-of-concept, we developed enzyme modules for three useful purposes by encapsulating a couple of enzymes: (i) development of a miniature glucose sensor, (ii) protection of living cells, and (iii) regeneration of nicotinamide adenine dinucleotides (NADs). By the modulation of enzymes using silica nanocapsules, more efficient coupled reactions, separation of enzymatic reactions from surroundings, and easy handling of several enzymes by using a single module could be achieved. Therefore, our silica nanocapsules for enzyme modules can be promoted as general platforms for developing artificial nanoreactors.

Nanoformulation approach for improved stability and efficiency of lactoperoxidase

Lactoperoxidase is a glycosylated protein with a molecular mass of 78 kDa, which being excreted in several mammalian secretions. Lactoperoxidase is included in many biological processes and well-known to have biocidal actions, attending as active antibiotics and antiviral agents. This wide-spectrum of biocidal activities mediates via a definite inhibitory system named lactoperoxidase system which acts a potent role in the innate immune response since its activity is not restricted by the antimicrobial effect, but might act a significant role in the hydrolysis of many toxins like aflatoxin. Hence with the current progresses in technology, nanoparticles can offer chances as an active candidate that might be utilized for stabilizing and potentiating the activity of LPO for use in several applications. Due to the variability functions of LPO, this enzyme considers an active target to be encapsulated or coated to NPs for developing novel nanocombinations with controlled surface characteristics. The development of approaches which might enhance conformational stabilization for several weeks of LPO via nanoformulation could improve the biopharmaceutical applicability of this bioactive ingredient. Nanoformulation of LPO enhances novel functions that can be useful in many biotechnological applications like food industry, cosmetic and pharmaceutical applications or to deliver and encapsulate bioactive components.

Peptide-Mediated Synthesis of Zeolitic Imidazolate Framework-8 with Controllable Morphology and Size

Peptides with a sequence of Nap-I_x-GPLGLAG-R₄-NH₂ (x = 2, 4, and 6, shorted as I₂R₄, I₄R₄, and I₆R₄) were used as capping agents for the synthesis of zeolitic imidazolate framework-8 (ZIF-8) in water. Peptide addition can significantly inhibit the growth of ZIF-8 crystals. The shape and size of ZIF-8 crystals was related closely to the number of isoleucine (Ile, I) residues as well as concentration of the peptide. The shape of ZIF-8 crystals changes from rhomboid dodecahedron to truncated rhombic dodecahedron to cube with the decreasing number of isoleucine residues from six to two. At a peptide concentration of 1.0 mM, the morphology of ZIF-8 crystals was cubic, truncated rhombic dodecahedron, and typical rhombic dodecahedron in the cases of I₂R₄, I₄R₄, and I₆R₄, respectively. Also, the particle size can be regulated from ca. 1.7 μm to <100 nm by controlling the peptide concentration from 0 to 2.0 mM. This work develops a simple and green method for the synthesis of ZIF-8 crystals with controllable shape and size in water, which shows high potential for biomedical and biological applications.

Bioengineering of nano metal-organic frameworks for cancer immunotherapy

Immunotherapy techniques, such as immune checkpoint inhibitors, chimeric antigen receptor (CAR) T cell therapies and cancer vaccines, have been burgeoning with great success, particularly for specific cancer types. However, side effects with fatal risks, dysfunction in tumor microenvironment and low immune response rates remain the bottlenecks in immunotherapy. Nano metal-organic frameworks (nMOFs), with an accurate structure and a narrow size distribution, are emerging as a solution to these problems. In addition to their function of temporospatial delivery, a large library of their compositions, together with flexibility in chemical interaction and inherent immune efficacy, offers opportunities for various designs of nMOFs for immunotherapy. In this review, we overview state-of-the-art research on nMOFs-based immunotherapies as well as their combination with other therapies. We demonstrate that nMOFs are predominantly customized for vaccine delivery or tumor-microenvironment modulation. Finally, a prospect of nMOFs in cancer immunotherapy will be discussed.