Polycyclic Aromatic Hydrocarbons: Sources, Toxicity, and Remediation Approaches

Characterization of organic contaminants associated with road dust of Delhi NCR, India

Hydrophobic organic contaminated polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and CHNS (carbon, hydrogen, nitrogen and sulphur species) are explosively associated with road dust particles. A few organic contaminants are toxic in nature and have an unpleasant effect on human health. The International Agency for Research on Cancer (IARC), the US Department of Health and Human Services (HHS) and the United States-Environmental Protection Agency has considered several PAHs and PCBs as carcinogens for human beings. In the proposed study, the anthropogenic contaminants present in road dust were assessed in six representative diversified sites i.e. industrial, commercial, office, residential, construction and traffic intersection in Delhi NCR, India. Roadside dust samples were gathered in premonsoon, monsoon and postmonsoon seasons and characterized for PAHs, PCBs and CHNS. The concentration of total PAHs (16 Nos) and PCBs (6 Nos) of the selected sites ranged from 0.27 µg/kg to 605.80 µg/kg and 0.01 µg/kg to 41.26 µg/kg, respectively. The Fourier transform infrared spectroscopy-attenuated total reflectance study suggested that the presence of O = C = O, Si-O, carbonyl, acidic or aliphatic esters group were associated with road dust particles. Hydrogen and sulphur concentrations were not detected in the selected road dust samples. Carbon and nitrogen concentrations varied from 2.24% to 16.82% and 0.69% to 14.5%, respectively, seasonally. In the premonsoon season, road dust was distinguishably contaminated as compared to monsoon and postmonsoon season, which might be due to movement of contaminated road dust from adjacent locations. It was perceived that Delhi NCR organic contamination in road dust was much below as compared to other countries. It may be concluded that due to the presence of significant amounts of carbon and nitrogen concentrations in the road dust, to a greater extent, road dust can be fertile and might be advantageous for green belt development to mitigate air pollution. The utilization of road dust will further bring down the burden of landfill sites and may lead towards sustainability.

Spatio-temporal distribution and sources of polycyclic aromatic hydrocarbons in Tunis Lagoon: Concentrations in sediments and Marphysa sanguinea body and excrement

Despite international recognition as an important coastal wetland, Tunis Lagoon is still subjected to anthropogenic pressures. This article provides valuable data on the spatio-temporal distribution, toxicity, and origins of polycyclic aromatic hydrocarbons (PAHs) in the Tunis Lagoon complex. PAHs' concentrations were measured in Marphysa sanguinea body and excrements, as well as in surface sediments. Total mean PAHs' concentrations reached a maximum of 2398 ng/g dry weight (DW) in sediments, 1007.19 ng/g DW in M. sanguinea, and 2602.05 ng/g DW in excrements. Diagnostic PAHs' ratios were used to determine whether PAHs' origins were pyrogenic or petrogenic. Our data showed a predominance of PAHs with a pyrogenic source. Principal component analysis showed PAHs isolated from polychaetes clearly separated from those measured in sediment and excrement. We believe that sediments are not the main source of bioaccumulation by M. sanguinea. Moreover, the toxicity of PAHs in sediments is moderate to high for benthic organisms.

Microalgal-induced remediation of wastewaters loaded with organic and inorganic pollutants: An overview

The recent surge in industrialization has intensified the accumulation of various types of organic and inorganic pollutants due to the illegal dumping of partially and/or untreated wastewater effluents in the environment. The pollutants emitted by several industries pose serious risk to the environment, animals and human beings. Management and diminution of these hazardous organic pollutants have become an incipient research interest. Traditional physiochemical methods are energy intensive and produce secondary pollutants. So, bioremediation via microalgae has appeared to be an eco-friendly and sustainable technique to curb the adverse effects of organic and inorganic contaminants because microalgae can degrade complex organic compounds and convert them into simpler and non-toxic substances without the release of secondary pollutants. Even some of the organic pollutants can be exploited by microalgae as a source of carbon in mixotrophic cultivation. Literature survey has revealed that use of the latest modification techniques for microalgae such as immobilization (on alginate, carrageena and agar), pigment-extraction, and pretreatment (with acids) have enhaced their bioremedial potential. Moreover, microalgal components i.e., biopolymers and extracellular polymeric substances (EPS) can potentially be exploited in the biosorption of pollutants. Though bioremediation of wastewaters by microalgae is quite well-studied realm but some aspects like structural and functional responses of microalgae toward pollutant derivatives/by-products (formed during biodegradation), use of genetic engineering to improve the tolerance of microalgae against higher concentrations of polluatans, and harvesting cost reduction, and monitoring of parameters at large-scale still need more focus. This review discusses the accumulation of different types of pollutants into the environment through various sources and the mechanisms used by microalgae to degrade commonly occurring organic and inorganic pollutants.

Toxicity overview of endocrine disrupting chemicals interacting in vitro with the oestrogen receptor

The oestrogen receptor (ER) from the nuclear receptor family is involved in different physiological processes, which can be affected by multiple xenobiotics. Some of these compounds, such as bisphenols, pesticides, and phthalates, are widespread as consequence of human activities and are commonly present also in human organism. Xenobiotics able to interact with ER and trigger a hormone-like response, are known as endocrine disruptors. In this review, we aim to summarize the available knowledge on products derived from human industrial activity and other xenobiotics reported to interact with ER. ER-disrupting chemicals behave differently towards oestrogen-dependent cell lines than endogenous oestradiol. In low concentrations, they stimulate proliferation, whereas at higher concentrations, are toxic to cells. In addition, most of the knowledge on the topic is based on individual compound testing, and only a few studies assess xenobiotic combinations, which better resemble real circumstances. Confirmation from in vivo models is lacking also.

The Roles of Microbes in Stream Restorations

The goods and services provided by riverine systems are critical to humanity, and our reliance increases with our growing population and demands. As our activities expand, these systems continue to degrade throughout the world even as we try to restore them, and many efforts have not met expectations. One way to increase restoration effectiveness could be to explicitly design restorations to promote microbial communities, which are responsible for much of the organic matter breakdown, nutrient removal or transformation, pollutant removal, and biomass production in river ecosystems. In this paper, we discuss several design concepts that purposefully create conditions for these various microbial goods and services, and allow microbes to act as ecological restoration engineers. Focusing on microbial diversity and function could improve restoration effectiveness and overall ecosystem resilience to the stressors that caused the need for the restoration. Advances in next-generation sequencing now allow the use of microbial 'omics techniques (e.g., metagenomics, metatranscriptomics) to assess stream ecological conditions in similar fashion to fish and benthic macroinvertebrates. Using representative microbial communities from stream sediments, biofilms, and the water column may greatly advance assessment capabilities. Microbes can assess restorations and ecosystem function where animals may not currently be present, and thus may serve as diagnostics for the suitability of animal reintroductions. Emerging applications such as ecological metatranscriptomics may further advance our understanding of the roles of specific restoration designs towards ecological services as well as assess restoration effectiveness.

Anthracene removal potential of green synthesized titanium dioxide nanoparticles (TiO2-NPs) and Alcaligenes faecalis HP8 from contaminated soil

Anthracene biodegradation potential has been studied in liquid culture and soil microcosm environment by employing green synthesized TiO₂ nanoparticles (NPs) and Alcaligenes faecalis HP8. The bacterium was isolated from crude oil contaminated soil, while TiO₂ nanoparticles were synthesized using Paenibacillus sp. HD1PAH and Cyperus brevifolius which have PAHs remediation abilities. The dual application of TiO₂ nanoparticles and Alcaligenes faecalis HP8 decreases anthracene concentration up to 21.3% in liquid at the end of 7 days and 37.9% in the soil treatments after completion of 30 days. Besides, the GC-MS analysis revealed production of five metabolites including 1,2-anthracenedihydrodiol; 6,7-benzocoumarin; 3-hydroxy-2-naphthoic acid; salicylic acid and 9,10-anthraquinone at different time interval of the treatments. Anthracene degradation pathway confirms the breakdown of three ring anthracene to one ring salicylic acid. Additionally, soil dehydrogenase, urease, alkaline phosphatase, catalase and amylase activities increased up to 4.09 folds, 8.6 folds, 4.4 folds, 3.6 folds and 2.1 folds respectively after the combined treatments of TiO₂ nanoparticles and Alcaligenes faecalis HP8. The bacterial biomass and residual anthracene concentration were found to be negatively correlated. Finally, the study brings into light a novel anthracene biodegradation pathway and provides a new dimension in nano assisted bacterial remediation.

Polycyclic Aromatic Hydrocarbons as Anode Materials in Lithium-Ion Batteries: A DFT Study

The structure and energetics of the interactive behavior of Li⁺ and Li with polycyclic aromatic hydrocarbons (PAHs) have been studied at the wB97XD/6-311G(d,p) level of DFT. The electron distribution in the PAHs, analyzed using the topology of the molecular electrostatic potential (MESP), led to the categorization of their aromatic rings into five types, viz R_s, R_n, R_d, R_b, and R_e. Among the different rings, sextet-type R_s and naphthalene-type R_n rings showed the highest interaction with Li⁺. The change in MESP at the nucleus of Li⁺ (ΔV_Li⁺) due to the formation of the complex Li⁺...PAH is found to be proportional to the adsorption energy (E₁). In Li...PAH, the spin density on Li is close to zero, suggesting the formation of Li⁺...PAH^•- due to the electron transfer from Li to PAH. The adsorption energy (E₂) for Li...PAH does not correlate with the change in MESP at the nucleus of Li, whereas the dissociation energy (E₃) of Li⁺...PAH^•- to yield Li⁺ and PAH^•- correlates well with the MESP data, ΔV_Li. The study confirms that the change in MESP at the nucleus of Li⁺ due to complex formation gives a quantitative measure of the electronic effect of the cation-π binding. The cell potential (V_cell) is predicted for the lithium ion battery (LIB) using the Li⁺...PAH and Li...PAH adsorption energies. On the basis of the V_cell data, "carbon nanoflake"-type systems, viz coronene, circumbiphenyl, C₄₂H₁₆, and C₅₀H₁₈ are suggested as good anode materials for LIBs.

Continuous bioreactors enable high-level bioremediation of diesel-contaminated seawater at low and mesophilic temperatures using Antarctic bacterial consortia: Pollutant analysis and microbial community composition

In 2020, more than 21,000 tons of diesel oil were released accidently into the environment with most of it contaminating water bodies. There is an urgent need for sustainable technologies to clean up rivers and oceans to protect wildlife and human health. One solution is harnessing the power of bacterial consortia; however isolated microbes from different environments have shown low diesel bioremediation rates in seawater thus far. An outstanding question is whether Antarctic microorganisms that thrive in environments polluted with hydrocarbons exhibit better diesel degrading activities when propagated at higher temperatures than those encountered in their natural ecosystems. Here, we isolated bacterial consortia, LR-30 (30 °C) and LR-10 (10 °C), from the Antarctic rhizosphere soil of Deschampsia antarctica (Livingston Island), that used diesel oil as the only carbon substrate. We found that LR-30 and LR-10 batch bioreactors metabolized nearly the entire diesel content when the initial concentration was 10 (g/L) in seawater. Increasing the initial diesel concentration to 50 gDiesel/L, LR-30 and LR-10 bioconverted 33.4 and 31.2 gDiesel/L in 7 days, respectively. The 16S rRNA gene sequencing profiles revealed that the dominant bacterial genera of the inoculated LR-30 community were Achromobacter (50.6%), Pseudomonas (25%) and Rhodanobacter (14.9%), whereas for LR-10 were Pseudomonas (58%), Candidimonas (10.3%) and Renibacterium (7.8%). We also established continuous bioreactors for diesel biodegradation where LR-30 bioremediated diesel at an unprecedent rate of (34.4 g/L per day), while LR-10 achieved (24.5 g/L per day) at 10 °C for one month. The abundance of each bacterial genera present significantly fluctuated at some point during the diesel bioremediation process, yet Achromobacter and Pseudomonas were the most abundant member at the end of the batch and continuous bioreactors for LR-30 and LR-10, respectively.

Self-Assembly of Two Tubular Metalloligand-Based Palladium-Organic Cages as Hosts for Polycyclic Aromatic Hydrocarbons

Herein we report two tubular metal-organic cages (MOCs), synthesized by the self-assembly of bidentate metalloligands with different lengths and Pd^II. These two MOCs feature Pd₄L₈-type square tubular and Pd₃L₆-type triangular cage structures, respectively. Both MOCs have been fully characterized by NMR spectroscopy, mass spectrometry, and theoretical calculation. Both cages can be employed for encapsulating polycyclic aromatic hydrocarbons and show high binding affinity toward coronene.

Enzymatic Treatments for Biosolids: An Outlook and Recent Trends

Wastewaters are nutrient-rich organic materials containing significant concentrations of different nutrients, dissolved and particulate matter, microorganisms, solids, heavy metals, and organic pollutants, including aromatic xenobiotics. This variety makes wastewater treatment a technological challenge. As a result of wastewater treatment, biosolids are generated. Biosolids, commonly called sewage sludge, result from treating and processing wastewater residuals. Increased biosolids, or activated sludge, from wastewater treatment is a major environmental and social problem. Therefore, sustainable and energy-efficient wastewater treatment systems must address the water crisis and environmental deterioration. Although research on wastewater has received increasing attention worldwide, the significance of biosolids treatments and valorization is still poorly understood in terms of obtaining value-added products. Hence, in this review, we established some leading technologies (physical, chemical, and biological) for biosolids pretreatment. Later, the research focuses on natural treatment by fungal enzymes to end with lignocellulosic materials and xenobiotic compounds (polyaromatic hydrocarbons) as a carbon source to obtain biobased chemicals. Finally, this review discussed some recent trends and promising renewable resources within the biorefinery approach for bio-waste conversion to value-added by-products.

Soil treatment using a biosurfactant producing bacterial consortium in rice fields contaminated with oily sludge- a sustainable approach

A consortium of two biosurfactant-producing bacteria (Bacillus pumilus KS2 and Bacillus cereus R2) was developed to remediate petroleum hydrocarbon-contaminated paddy soil. Soil samples from a heavily contaminated rice field near Assam's Lakwa oilfield were collected and placed in earthen pots for treatment. After each month of incubation, 50 g of soil from each earthen pot was collected, and the soil TPH (ppm) in each sample was determined. The extracted TPH samples were analysed by Gas chromatography-mass spectrometry (GC-MS) to confirm microbial degradation. The soil samples were examined for changes in pH, conductivity, total organic content (TOC), water holding capacity, and total nitrogen content in addition to TPH degradation. An increasing trend in TPH degradation was observed with each passing month. After six months of treatment, the sample with the lowest initial TPH concentration (1735 ppm) had the highest degradation (91.24%), while the soil with the highest amount of TPH (5780 ppm) had the lowest degradation (74.35%). A wide range of aliphatic hydrocarbons found in soil samples was degraded by the bacterial consortium. The soil samples contained eight different low- and high-molecular-weight PAHs. Some were fully mineralized, while others were significantly reduced. With the decrease in the TPH level in the polluted soil, a significant improvement in the soil's physicochemical qualities (such as pH, electrical conductivity, total organic content, and water-holding capacity) was observed.

Cabbage butterfly as bioindicator species to investigate the genotoxic effects of PM10

Atmospheric pollution poses a serious threat to environment and human health, and particulate matter (PM) is one of the major contributors. Biological effects induced by PM are investigated through in vitro assays using cells and by in vivo tests with laboratory model animals. However, also the estimation of adverse effects of pollutants, including airborne ones, on wild animals, such as insects, is an essential component of environmental risk assessment. Among insects, butterflies are sensitive to environmental changes and are important wild pollinators, so they might be suitable as environmental bioindicator species. The aim of this study was to evaluate the suitability of a wild cabbage butterfly species (Pieris brassicae) as a bioindicator organism to assess the genotoxic effects of PM₁₀ collected in different sites. PM₁₀ was collected from April to September in urban, suburban, and rural sites. P. brassicae larvae were reared in laboratory under controlled conditions on cabbage plants and exposed to PM₁₀ organic extracts or dimethyl sulfoxide (controls) through vaporization. After exposure, larvae were dissected, and cells were used for comet assay. All PM extracts induced significant DNA damage in exposed larvae compared to controls and the extract collected in the most polluted site caused the highest genotoxic effect. In conclusion, the study suggested that butterflies, such as P. brassicae, could be applied as sensitive and promising bioindicators to investigate air quality and PM genotoxicity. Indeed, the use of these organisms allows the detection of genotoxic effects induced by PM sampled also in low-polluted areas.

Silicone passive sampling used to identify novel dermal chemical exposures of firefighters and assess PPE innovations

A plethora of chemicals are released into the air during combustion events, including a class of compounds called polycyclic aromatic hydrocarbons (PAHs). PAHs have been implicated in increased risk of cancer and cardiovascular disease, both of which are disease endpoints of concern in structural firefighters. Current commercially available personal protective equipment (PPE) typically worn by structural firefighters during fire responses have gaps in interfaces between the ensemble elements (e.g., hood and jacket) that allow for ingress of contaminants and dermal exposure. This pilot study aims to use silicone passive sampling to assess improvements in dermal protection afforded by a novel configuration of PPE, which incorporates a one-piece liner to eliminate gaps in two critical interfaces between pieces of gear. The study compared protection against parent and alkylated PAHs between the one-piece liner PPE and the standard configuration of PPE with traditional firefighting jacket and pants. Mannequins (n = 16) dressed in the PPE ensembles were placed in a Fireground Exposure Simulator for 10 min, and exposed to smoke from a combusting couch. Silicone passive samplers were placed underneath PPE at vulnerable locations near interfaces in standard PPE, and in the chamber air, to measure PAHs and calculate the dermal protection provided by both types of PPE. Silicone passive sampling methodology and analyses using gas chromatography with mass-spectrometry proved to be well-suited for this intervention study, allowing for the calculation and comparison of worker protection factors for 51 detected PAHs. Paired comparisons of the two PPE configurations found greater sum 2-3 ring PAH exposure underneath the standard PPE than the intervention PPE at the neck and chest, and at the chest for 4-7 ring PAHs (respective p-values: 0.00113, 0.0145, and 0.0196). Mean worker protection factors of the intervention PPE were also greater than the standard PPE for 98% of PAHs at the neck and chest. Notably, the intervention PPE showed more than 30 times the protection compared to the standard PPE against two highly carcinogenic PAHs, dibenzo[a,l]pyrene and benzo[c]fluorene. Nine of the detected PAHs in this study have not been previously reported in fireground exposure studies, and 26 other chemicals (not PAHs) were detected using a large chemical screening method on a subset of the silicone samplers. Silicone passive sampling appears to be an effective means for measuring dermal exposure reduction to fireground smoke, providing evidence in this study that reducing gaps in PPE interfaces could be further pursued as an intervention to reduce dermal exposure to PAHs, among other chemicals.

The distribution, sources and health risk of polycyclic aromatic hydrocarbons (PAHs) in sediments of Liujiang River Basin: A field study in typical karstic river

The accumulation of PAHs in sediments of Liujiang River Basin were investigated to disclose the sources, input processes and toxicity risk of PAHs in a typical karstic river. The results revealed the concentrations of ∑₁₅PAHs are ranging from 111.97 to 593.39 ng/g, most of which are centralized in upstream and midstream of Liujiang River. Positive Matrix Factorization identified PAHs are mainly from the mixed combustion of oil and coal, biomass combustion and oil products leaking. Redundancy analysis manifested mixed accumulation should be the main approach of PAHs that inputting sediment. The values of RQ_NCs and RQ_MPCs suggested the moderate contamination of PAHs. The higher HQ and ILCR indicated the ingestion of PAHs are the main way to impact public health, while children should be more susceptible to PAHs. The values of HQ and ILCR indicated the overall low non-carcinogenic risk of PAHs, but relatively high carcinogenic risk of PAHs.

Bacterial second messenger c-di-GMP: Emerging functions in stress resistance

In natural environments, bacteria constantly encounter various stressful conditions, including nutrient starvation, toxic chemicals, and oxidative stress. The ability to adapt to these adverse conditions is crucial for bacterial survival. Frequently, bacteria utilize nucleotide signaling molecules such as cyclic diguanylate (c-di-GMP) to regulate their behaviors when encounter stress conditions. c-di-GMP is a ubiquitous bacterial second messenger regulating the transition between the planktonic state and biofilm state. An essential feature of biofilms is the production of extracellular matrix that covers bacterial cells and offers a physical barrier protecting the cells from environmental assaults. Beyond that, accumulating evidences have demonstrated that changes in the environment, including stress stimuli, cause the alteration of intracellular levels of c-di-GMP in bacterial cells, which is immediately sensed by a variety of downstream effectors that induce an appropriate stress response. In this review, we summarize recent research on the role of c-di-GMP signaling in bacterial responses to diverse stress conditions.

Fluorescent spectroscopy paired with parallel factor analysis for quantitative monitoring of phenanthrene biodegradation and metabolite formation

Polycyclic aromatic hydrocarbons (PAHs) are a class of environmental contaminants released into the environment from both natural and anthropogenic sources that are associated with carcinogenic, mutagenic, and teratogenic health effects. Many remediation strategies for the treatment of PAH contaminated material, including bioremediation, can lead to the formation of toxic transformation products. Analytical techniques for PAHs and PAH transformation products often require extensive sample preparation including solvent extraction and concentration, chromatographic separation, and mass spectrometry to identify and quantify compounds of interest. Excitation-emission matrix (EEM) fluorescent spectroscopy paired with parallel factor analysis (PARAFAC) is an approach for analyzing PAHs that eliminates the need for extensive sample preparation and separation techniques before analysis. However, this technique has rarely been applied to monitoring PAH biotransformation and formation of PAH metabolites. The objectives of this research were to compare an established targeted analytical method to two-dimensional fluorescent spectroscopy and combined EEM-PARAFAC methods to monitor phenanthrene degradation by a bacterial pure culture, Mycobacterium Strain ELW1, identify and quantify phenanthrene transformation products, and derive kinetic constants for phenanthrene degradation and metabolite formation. Both phenanthrene and its primary transformation product, trans-9,10-dihydroxy-9,10-dihydrophenanthrene, were identified and quantified with the EEM-PARAFAC method. The value of the EEM-PARAFAC method was demonstrated in the superiority of sensitivity and accuracy of quantification to two-dimensional fluorescent spectroscopy. Quantification of targets and derivation of kinetic constants using the EEM-PARAFAC method were validated with an established gas chromatography-mass spectrometry (GC-MS) method. To the authors' knowledge, this is the first study to use an EEM-PARAFAC method to monitor, identify, and quantify both PAH biodegradation and PAH metabolite formation by a bacterial pure culture.

The Effect of Spring Barley Fertilization on the Content of Polycyclic Aromatic Hydrocarbons, Microbial Counts and Enzymatic Activity in Soil

Soil-dwelling microorganisms play an important role in the environment by decomposing organic matter, degrading toxic compounds and participating in the nutrient cycle. The microbiological properties of soil are determined mainly by the soil pH, granulometric composition, temperature and organic carbon content. In agricultural soils, these parameters are modified by agronomic operations, in particular fertilization. Soil enzymes participate in nutrient cycling and they are regarded as sensitive indicators of microbial activity and changes in the soil environment. The aim of the present study was to determine whether PAH content in soil is associated with the microbial activity and biochemical properties of soil during the growing season of spring barley treated with manure and mineral fertilizers. Soil samples for analysis were collected on four dates in 2015 from a long-term field experiment established in 1986 in Bałcyny near Ostróda (Poland). The total content of PAHs was lowest in August (194.8 µg kg^-1) and highest in May (484.6 µg kg^-1), whereas the concentrations of heavier weight PAHs was highest in September (158.3 µg kg^-1). The study demonstrated that weather conditions and microbial activity induced considerable seasonal variations in PAHs content. Manure increased the content of organic carbon and total nitrogen, the abundance of organotrophic, ammonifying and nitrogen-fixing bacteria, actinobacteria and fungi and enhanced the activity of soil enzymes, including dehydrogenases, catalase, urease, acid phosphatase and alkaline phosphatase.

Petroleum Hydrocarbon Catabolic Pathways as Targets for Metabolic Engineering Strategies for Enhanced Bioremediation of Crude-Oil-Contaminated Environments

Anthropogenic activities and industrial effluents are the major sources of petroleum hydrocarbon contamination in different environments. Microbe-based remediation techniques are known to be effective, inexpensive, and environmentally safe. In this review, the metabolic-target-specific pathway engineering processes used for improving the bioremediation of hydrocarbon-contaminated environments have been described. The microbiomes are characterised using environmental genomics approaches that can provide a means to determine the unique structural, functional, and metabolic pathways used by the microbial community for the degradation of contaminants. The bacterial metabolism of aromatic hydrocarbons has been explained via peripheral pathways by the catabolic actions of enzymes, such as dehydrogenases, hydrolases, oxygenases, and isomerases. We proposed that by using microbiome engineering techniques, specific pathways in an environment can be detected and manipulated as targets. Using the combination of metabolic engineering with synthetic biology, systemic biology, and evolutionary engineering approaches, highly efficient microbial strains may be utilised to facilitate the target-dependent bioprocessing and degradation of petroleum hydrocarbons. Moreover, the use of CRISPR-cas and genetic engineering methods for editing metabolic genes and modifying degradation pathways leads to the selection of recombinants that have improved degradation abilities. The idea of growing metabolically engineered microbial communities, which play a crucial role in breaking down a range of pollutants, has also been explained. However, the limitations of the in-situ implementation of genetically modified organisms pose a challenge that needs to be addressed in future research.

Atmospheric degradation mechanism of anthracene initiated by OH•: A DFT prediction

Density functional theory (DFT) calculations at the M06-2X/def2-TZVP level have been employed to investigate the atmospheric oxidation mechanism of anthracene (ANT) initiated by HO^•. Direct hydrogen atom abstraction from the ANT using HO^• takes place hardly at ambient conditions while addition of HO^• to the C1, C2, and C4 sites are thermodynamically and kinetically more advantageous. The addition reactions are controlled by the aromaticity and the kinetic trends were justified by resonance stabilization energies. The rate constants were calculated by using the Rice-Ramsperger-Kassel-Marcus (RRKM) and canonical transition state theory (CTST) methods in conjugation with zero curvature tunneling (ZCT). The overall RRKM-bimolecular rate constant at ambient conditions is 6.72 × 10^-12 cm³ molecule^-1 s^-1, is negatively dependent on the temperature and can be expressed as k_250-350^1bar=3.92×10^-14exp(1534.9T). Contribution of the AD-C4 path in the overall reaction is about 70-80%, implying that the dependence of overall rate constant on pressure can be ignored. The kinetic data exhibit that the ANT is degraded during its long-range transport in the atmosphere and cannot be classified as persistent organic pollutants.

Placental transcriptomic signatures of prenatal exposure to Hydroxy-Polycyclic aromatic hydrocarbons

BACKGROUND

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous pollutants originating from petrogenic and pyrogenic sources. PAH compounds can cross the placenta, and prenatal PAH exposure is linked to adverse infant and childhood health outcomes.

OBJECTIVE

In this first human transcriptomic assessment of PAHs in the placenta, we examined associations between prenatal PAH exposure and placental gene expression to gain insight into mechanisms by which PAHs may disrupt placental function.

METHODS

The ECHO PATHWAYS Consortium quantified prenatal PAH exposure and the placental transcriptome from 629 pregnant participants enrolled in the CANDLE study. Concentrations of 12 monohydroxy-PAH (OH-PAH) metabolites were measured in mid-pregnancy urine using high performance liquid chromatography tandem mass spectrometry. Placental transcriptomic data were obtained using paired-end RNA sequencing. Linear models were fitted to estimate covariate-adjusted associations between maternal urinary OH-PAHs and placental gene expression. We performed sex-stratified analyses to evaluate whether associations varied by fetal sex. Selected PAH/gene expression analyses were validated by treating HTR-8/SVneo cells with phenanthrene, and quantifying expression via qPCR.

RESULTS

Urinary concentrations of 6 OH-PAHs were associated with placental expression of 8 genes. Three biological pathways were associated with 4 OH-PAHs. Placental expression of SGF29 and TRIP13 as well as the vitamin digestion and absorption pathway were positively associated with multiple metabolites. HTR-8/SVneo cells treated with phenanthrene also exhibited 23 % increased TRIP13 expression compared to vehicle controls (p = 0.04). Fetal sex may modify the relationship between prenatal OH-PAHs and placental gene expression, as more associations were identified in females than males (45 vs 28 associations).

DISCUSSION

Our study highlights novel genes whose placental expression may be disrupted by OH-PAHs. Increased expression of DNA damage repair gene TRIP13 may represent a response to double-stranded DNA breaks. Increased expression of genes involved in vitamin digestion and metabolism may reflect dietary exposures or represent a compensatory mechanism to combat damage related to OH-PAH toxicity. Further work is needed to study the role of these genes in placental function and their links to perinatal outcomes and lifelong health.

Characteristics of fine and ultrafine aerosols in the London underground

Underground railway systems are recognised spaces of increased personal pollution exposure. We studied the number-size distribution and physico-chemical characteristics of ultrafine (PM_0.1), fine (PM_0.1-2.5) and coarse (PM_2.5-10) particles collected on a London underground platform. Particle number concentrations gradually increased throughout the day, with a maximum concentration between 18:00 h and 21:00 h (local time). There was a maximum decrease in mass for the PM_2.5, PM_2.5-10 and black carbon of 3.9, 4.5 and ~ 21-times, respectively, between operable (OpHrs) and non-operable (N-OpHrs) hours. Average PM₁₀ (52 μg m^-3) and PM_2.5 (34 μg m^-3) concentrations over the full data showed levels above the World Health Organization Air Quality Guidelines. Respiratory deposition doses of particle number and mass concentrations were calculated and found to be two- and four-times higher during OpHrs compared with N-OpHrs, reflecting events such as train arrival/departure during OpHrs. Organic compounds were composed of aromatic hydrocarbons and polycyclic aromatic hydrocarbons (PAHs) which are known to be harmful to health. Specific ratios of PAHs were identified for underground transport that may reflect an interaction between PAHs and fine particles. Scanning transmission electron microscopy (STEM) chemical maps of fine and ultrafine fractions show they are composed of Fe and O in the form of magnetite and nanosized mixtures of metals including Cr, Al, Ni and Mn. These findings, and the low air change rate (0.17 to 0.46 h^-1), highlight the need to improve the ventilation conditions.

Highly efficient photodegradation of magnetic GO-Fe3O4@SiO2@CdS for phenanthrene and pyrene: Mechanism insight and application assessment

A novel magnetic core-shell Fe₃O₄@SiO₂@CdS embedded graphene oxide (GO) composite was prepared for the visible-light-driven photodegradation of high ring number polycyclic aromatic hydrocarbons (PAHs). The potential application of GO-Fe₃O₄@SiO₂@CdS was evaluated through the photodegradation of phenanthrene and pyrene in deionized water, tap water, and lake water, respectively. It was found that GO-Fe₃O₄@SiO₂@CdS could remove 86.4 % of phenanthrene and 93.4 % of pyrene, suggesting its potential for the degradation of high-ring number PAHs. The density functional theory (DFT) calculations demonstrate that pyrene has more active sites attacked by free radicals. The photoelectrochemical measurement and quenching experiments indicate that GO can transfer photoelectrons efficiently, resulting in the crucial radicals (O₂^-, OH and ¹O₂). More importantly, the photocatalytic activity kept almost constant during five cycles, confirming the significant anti-photocorrosion of GO-Fe₃O₄@SiO₂@CdS. This work provides some new insights into the removal of PAHs with high-ring numbers in the natural water environment.

The Use of Mycelial Fungi to Test the Fungal Resistance of Polymeric Materials

There are two main themes in the research on the biodegradation of industrial materials by mycelial fungi. The challenge of reducing environmental pollution necessitates the creation of biodegradable polymers that allow microorganisms, including mycelial fungi, to degrade them to low-molecule soluble substances. Additionally, to minimize the biodegradation of industrial materials while they are operating in the environment, there is a need to produce fungi-resistant polymer compositions. The fungal resistance of industrial materials and products can be assessed using a specific set of mycelial fungi cultures. Test cultures selected for this purpose are supported in the All-Russian Collection of Microorganisms (VKM). This review addresses the principle of culture selection to assess the fungal resistance of industrial materials and evaluates the results of the tests using these cultures.

The β-Blocker Carvedilol Prevents Benzo(a)pyrene-Induced Lung Toxicity, Inflammation and Carcinogenesis

The current study evaluated the effects of the β-blocker carvedilol on benzo(a)pyrene (B(a)P) and its active metabolite benzo(a)pyrene diol epoxide (BPDE)-induced lung toxicity, inflammation and carcinogenesis and explored the potential mechanisms. Carvedilol blocked the BPDE-induced malignant transformation of human bronchial epithelial cells BEAS-2B. In BEAS-2B cells, B(a)P strongly activated ELK-1, a transcription factor regulating serum response element (SRE) signaling, which was attenuated by carvedilol. Carvedilol also inhibited the B(a)P-induced AhR/xenobiotic responsive element (XRE) and mRNA expression of CYP1A1 and attenuated B(a)P-induced NF-κB activation. In a B(a)P-induced acute lung toxicity model in CD-1/IGS mice, pretreatment with carvedilol for 7 days before B(a)P exposure effectively inhibited the B(a)P-induced plasma levels of lactate dehydrogenase and malondialdehyde, inflammatory cell infiltration and histopathologic abnormalities in the lung, and upregulated the expression of GADD45α, caspase-3 and COX-2 in the lung. In a B(a)P-induced lung carcinogenesis model in A/J mice, carvedilol treatment for 20 weeks did not affect body weight but significantly attenuated tumor multiplicity and volume. These data reveal a previously unexplored role of carvedilol in preventing B(a)P-induced lung inflammation and carcinogenesis by inhibiting the cross-talk of the oncogenic transcription factors ELK-1, AhR and NF-κB.

Effect of sorption properties on the content, ecotoxicity, and bioaccumulation of polycyclic aromatic hydrocarbons (PAHs) in bottom sediments

Polycyclic aromatic hydrocarbons (PAHs) tend to accumulate in the sediment due to their high hydrophobicity. Despite PAHs have been the subject of several reviews, PAH sorption processes in bottom sediments has not been comprehensively discucorrelation coefficients between sorption parameters and contessed. Understanding the dependencies governing PAH sorption processes will allow to predict, monitor, and mitigate the ecological effects of PAH contamination and the associated risks to humans or wildlife. The objectives of the study were to assess the relationship between the sorption properties and the content of PAHs in bottom sediments and mussels. The PAH profile was dominated by higher-molecular hydrocarbons, which accounted for 73% of the total concentration of PAHs. Potentiometric studies revealed the steric-based PAH sorption mechanism that strongly depended on the presence of negatively dissociating structures such as carboxylic or phenolic functional groups. Based on the changes in Q8 values, the size-exclusion effect was more likely for 5- and 6-ring compounds. Pores < 5 µm, which had the largest share in the specific surface area, were the preferred sites for PAH sequestration and stabilization in bottom sediments. The availability of PAHs was reduced in sediments with high organic matter content. The PAH bioaccumulation factor significantly decreased with increasing TOC content in sediments. Higher mortality and growth inhibition of H. incongruens were observed in samples with high and medium TOC contents than in those with low TOC content.

Investigating the Solvent Effects on Binding Affinity of PAHs-ExBox4+ Complexes: An Alchemical Approach

Polycyclic aromatic hydrocarbons (PAHs) are polluting agents, produced naturally or artificially, widely dispersed in the environment and potentially carcinogenic and immunotoxic to humans and animals, mainly for marine life. Recently, a tetracationic box-shaped cyclophane (ExBox⁴⁺) was synthesized, fully characterized, and revealed to form host-guest complexes with PAHs in acetonitrile, demonstrating the potential ability for it to act as a PAHs scavenger. This work investigates, through Molecular Dynamics (MD) simulations, the binding affinity between different PAHs and ExBox⁴⁺ in different solvents: chloroform (nonpolar), acetonitrile (polar protic), and water (polar protic). An alchemical method of simultaneous decoupling-recoupling (SDR) was used and implemented in a newly developed Python program called GHOAT, which fully automates the calculation of binding free energies and invokes the AMBER 2020 simulation package. The results showed that the affinity between ExBox⁴⁺ and PAHs in water is much larger than in organic media, with free energies between -5 and -20 kcal/mol, being able to act as a PHAs scavenger with great potential for applications in environmental chemistry such as soil washing. The results also reveal a significant correlation with the experimental available ΔG values. The methodology employed presents itself as an important tool for the in silico determination of binding affinities, not only available for charged cyclophanes but also extensible to several other HG supramolecular systems in condensed media, aiding in the rational design of host-guest systems in a significant way.

Distribution, sources and ecological risk assessment of polycyclic aromatic hydrocarbons in waters and sediments from Olt River dam reservoirs in Romania

This study provides important data on the distribution, sources and ecological risks of polycyclic aromatic hydrocarbons (PAHs), in surface waters and sediments collected from dam reservoirs on middle and lower course of the Olt River, the main tributary of the Danube, until the discharge into the Black Sea. A wide variation range of total PAHs concentrations in water (from 1.3 to 46.2 ng/L) and sediment (from 1.78 to 614.04 μg/kg) samples was emphasized by the results. The highest average PAHs concentration in water was recorded in the cold season and the lowest in the summer. In sediments, no differences were observed depending on the sampling period. Spatial distribution of PAHs in waters and sediments was correlated with the main anthropogenic activities along the river course. Regardless of the method used to attribute PAH sources (diagnostic ratios of specific PAHs, principal component analysis and hierarchical cluster analysis), it was confirmed that the potential anthropogenic sources of PAHs were both pyrogenic (incomplete combustion of biomass and coal) and pyrolytic (incomplete combustion of liquid fossil fuels and vehicle exhaust emissions), with a dominant pyrolytic input. Ecological risk assessment based on environmental quality standards, mean effect range-median quotient (m-ERM-Q), toxic equivalency factors (TEFs) and risk quotient (RQ) methods indicated potentially low ecological risks from PAHs. The ecological status of the Olt river waters poses no potential risk, and pollution of surface sediments can be classified as low polluted, except for two sites near industrial activities classified as moderately polluted. Therefore, a regular monitoring of PAHs concentration in the waters and sediments should be performed to prevent further contamination of PAHs in the studied area, especially in densely populated industrial areas.

Lung cancer risk in workers occupationally exposed to polycyclic aromatic hydrocarbons with emphasis on the role of DNA repair gene

OBJECTIVE

Workers in secondary aluminum production plants are occupationally exposed to polycyclic aromatic hydrocarbons (PAHs). We aimed to monitor the concentrations of PAHs in air and in serum of workers at two secondary aluminum production plants. We also investigated the potential risk of lung cancer development among PAHs exposed workers with emphasis on the role of A1AT mutation and APEX1 gene polymorphisms.

METHODS

This study included 177 workers from administrative departments and production lines. Blood samples were obtained for estimation of benzo(a)pyrene diol epoxide albumin adduct (BPDE-Alb adduct), anti-Cyclin-B1 marker (CCNB1) and squamous cell carcinoma antigen (SCCAg). Genes' polymorphism for human apurinic/apyrimidinic endonuclease (APEX1) and alpha-1-anti-trypsin (A1AT) gene mutation were detected.

RESULTS

There was a significant increase in the level of BPDE-Alb adduct among exposed workers in comparison to non-exposed group. Moreover, 41.67% of exposed workers in El Tebbin had BPDE-Alb adduct level ≥ 15 ng/ml versus 29.6% of workers in Helwan factory. There was a significant increase in tumor markers (SCCAg and CCNB1) among workers whose BPDE-Alb adduct ≥ 15 ng/ml. There was a significant increase in the level of BPDE-Alb adducts in exposed workers carrying homozygous APEX1 genotype Glu/Glu. Furthermore, exposed workers with the Glu/Glu genotype had high tumor markers levels. There was a significant increase in levels of BPDE-Alb adducts in workers carrying A1AT mutant allele. Moreover, workers with mutant A1AT genotype had significantly high tumor markers (SCCAg and CCNB1) levels.

CONCLUSION

Therefore, we conclude that aluminum workers may be at a potential risk of lung cancer development due to PAHs exposure. Although PAHs concentrations in air were within the permissible limits, yet evidence of DNA damage was present as expressed by high BPDE-albumin adduct level in exposed workers. Also, elevation of tumor markers (SCCAg and CCNB1) in exposed workers points to the importance of periodic biological monitoring of such workers to protect them from cancer risk.

A baseline study of polycyclic aromatic hydrocarbons distribution, source and ecological risk in Zhanjiang mangrove wetlands, South China

Polycyclic aromatic hydrocarbons (PAHs) are widespread environmental contaminants and pose a severe threat to human health. Here, 38 surface sediment samples collected from the Gaoqiao mangrove wetland in Zhanjiang, south China, were analyzed to determine 16 Environmental Protection Agency (EPA) priority PAHs. Total PAHs concentrations ranged from 33.5 µg/kg to 404.8 µg/kg with an average of 147.7 ± 77.7 µg/kg, inferring a moderate pollution level. Three and four-ring compounds dominated the PAHs composition patterns. Significant positive correlations were observed between the PAHs and the physicochemical properties of the sediments. According to the characteristic molecular ratio method, PAHs in sediments were mainly derived from combustion sources, including the incomplete combustion of liquid fossil fuels, grass, wood, and coal. The result based on the PMF model indicates that the primary combustion sources of PAHs are coal combustion, diesel-powered vehicles, biomass combustion and gasoline-powered vehicles, with a share of 39.01%, 25.21%, 12.72% and 10.48%, respectively. The petrogenic source contributes 12.58% PAHs to the sediments. The mean effects range median quotient (m-ERM-Q) and toxic equivalent method (TEQ) indicate a low comprehensive ecological risk of PAHs in the study area. Still, the evaluation results of effects range low (ERL) suggest that PAHs in the sediment would occasionally have adverse biological effects. Therefore, this situation demands attention and calls for protection strategies in the processes of urbanization and industrialization in south China.

The Anti- and Pro-Tumorigenic Role of Microbiota and Its Role in Anticancer Therapeutic Strategies

Human gut microbiota physiologically and actively participates as a symbiont to a wide number of fundamental biological processes, such as absorption and metabolism of nutrients, regulation of immune response and inflammation; gut microbiota plays also an antitumor role. However, dysbiosis, resulting from a number of different situations-dysmicrobism, infections, drug intake, age, diet-as well as from their multiple combinations, may lead to tumorigenesis and is associated with approximately 20% of all cancers. In a diagnostic, prognostic, therapeutic, and epidemiological perspective, it is clear that the bifaceted role of microbiota needs to be thoroughly studied and better understood. Here, we discuss the anti- and pro-tumorigenic potential of gut and other microbiota districts along with the causes that may change commensal bacteria from friend to foes.

Computational chromatography: A machine learning strategy for demixing individual chemical components in complex mixtures

Surface-enhanced Raman spectroscopy (SERS) holds exceptional promise as a streamlined chemical detection strategy for biological and environmental contaminants compared with current laboratory methods. Priority pollutants such as polycyclic aromatic hydrocarbons (PAHs), detectable in water and soil worldwide and known to induce multiple adverse health effects upon human exposure, are typically found in multicomponent mixtures. By combining the molecular fingerprinting capabilities of SERS with the signal separation and detection capabilities of machine learning (ML), we examine whether individual PAHs can be identified through an analysis of the SERS spectra of multicomponent PAH mixtures. We have developed an unsupervised ML method we call Characteristic Peak Extraction, a dimensionality reduction algorithm that extracts characteristic SERS peaks based on counts of detected peaks of the mixture. By analyzing the SERS spectra of two-component and four-component PAH mixtures where the concentration ratios of the various components vary, this algorithm is able to extract the spectra of each unknown component in the mixture of unknowns, which is then subsequently identified against a SERS spectral library of PAHs. Combining the molecular fingerprinting capabilities of SERS with the signal separation and detection capabilities of ML, this effort is a step toward the computational demixing of unknown chemical components occurring in complex multicomponent mixtures.

Symbiotic Microorganisms and Their Different Association Types in Aquatic and Semiaquatic Bugs

True bugs (Hemiptera, suborder Heteroptera) constitute the largest suborder of nonholometabolous insects and occupy a wide range of habitats various from terrestrial to semiaquatic to aquatic niches. The transition and occupation of these diverse habitats impose various challenges to true bugs, including access to oxygen for the aquatic species and plant defense for the terrestrial phytophagans. Although numerous studies have demonstrated that microorganisms can provide multiple benefits to terrestrial host insects, a systematic study with comprehensive higher taxa sampling that represents aquatic and semiaquatic habitats is still lacking. To explore the role of symbiotic microorganisms in true bug adaptations, 204 samples belonging to all seven infraorders of Heteroptera were investigated, representing approximately 85% of its superfamilies and almost all known habitats. The symbiotic microbial communities of these insects were analyzed based on the full-length amplicons of the bacterial 16S rRNA gene and fungal ITS region. Bacterial communities varied among hosts inhabiting terrestrial, semiaquatic, and aquatic habitats, while fungal communities were more related to the geographical distribution of the hosts. Interestingly, co-occurrence networks showed that species inhabiting similar habitats shared symbiotic microorganism association types. Moreover, functional prediction analyses showed that the symbiotic bacterial community of aquatic species displayed richer amino acid and lipid metabolism pathways, while plant-feeding true bugs benefited more from the symbiont-provided xenobiotics biodegradation pathway. These results deepened the recognition that symbiotic microorganisms were likely to help heteropterans occupy diverse ecological habitats and provided a reference framework for further studies on how microorganisms affect host insects living in various habitats. IMPORTANCE Symbiotic bacteria and fungi generally colonize insects and provide various benefits for hosts. Although numerous studies have investigated symbionts in terrestrial plant-feeding insects, explorations of symbiotic bacterial and fungal communities in aquatic and semiaquatic insects are rare. In this study, the symbiotic microorganisms of 204 aquatic, semiaquatic, and terrestrial true bugs were explored. This comprehensive taxon sampling covers ~85% of the superfamilies of true bugs and most insect habitats. Analyses of the diversity of symbionts demonstrated that the symbiotic microbial diversities of true bugs were mainly affected by host habitats. Co-occurrence networks showed that true bugs inhabiting similar habitats shared symbiotic microbial association types. These correlations between symbionts and hosts together with the functions of bacterial communities indicated that symbiotic microbial communities may help true bugs adapt to (semi)aquatic habitats.

Winter sources of PM2.5 pollution in Podkowa Leśna, a Central-European garden town (Mazovia, Poland)

The paper analyzes PM_2.5 aerosol samples collected in Podkowa Leśna, a garden town in Mazovia, Central Poland, for 15 days in winter 2019. We determined the mass concentrations in the air of PM_2.5 and PM_2.5-bound organic carbon, elemental carbon, levoglucosan, and nine polycyclic aromatic hydrocarbons (PAHs). PM_2.5 ranged from 11 to 51 μg m^-3 (mean 31 μg m^-3) and contained less than 32% organic carbon, 4% elemental carbon, 1% levoglucosan, and 0.12% total PAHs. The analysis based on positive matrix factorization (PMF) indicated two sources of PM_2.5 of similar strength - burning vehicle fuels and biomass burning for residential heating. Levoglucosan originated exclusively from biomass burning, while 90% of elemental carbon was from vehicle emissions. About 62% of organic carbon, 85% of benzo(a)anthracene and 55-65% of the remaining PAHs originated from biomass burning. Compared to many worldwide locations, PM_2.5, organic carbon, elemental carbon, and levoglucosan in Podkowa were among the lowest. The benzo(a)pyrene concentrations were the highest, while other PAHs were intermediate. However, the mass fractions of PAHs in Podkowa PM_2.5 were the highest among the four locations available for comparison. That may indicate the low quality of fuel-burning processes. PAH-related inhalation cancer risk based on PAH carcinogenic potency in Podkowa appeared marginal. This work aims to induce local administrative actions to improve air quality in garden towns.

Utilization of surface-active compounds derived from biosolids to remediate polycyclic aromatic hydrocarbons contaminated sediment soil

In the present study, surface-active compounds (SAC) were extracted from biosolids using an alkaline treatment process. They were tested for their remediation efficiency of crude oil-contaminated sediment soil and was compared with Triton x-100. The SAC exhibited a similar soil washing efficiency to that of the commercial Triton x-100, and under the optimized soil washing parameters, SAC exhibited a maximum of 91% total polycyclic aromatic hydrocarbons removal. Further, on analysing the toxicity of the soil residue after washing, it was observed that SAC from biosolids washed soil exhibited an average of 1.5-fold lesser toxicity compared to that of Triton x-100 on different test models-earthworm, a monocot, and dicot plants. The analysis of the key soil parameters revealed that the commercial surfactant reduced the soil organic matter and porosity by an average of 1.3-fold compared to SAC. Further, the ability of surfactants to induce toxicity was confirmed by the adsorption of the surfactants on the surface of the soil particles which was in the order of Triton x-100 > SAC. Thus, this study suggests that SAC can be applied as an effective bioremediation approach for contaminated soil for a greener and sustainable ecosystem.

Level of oxidative stress for the land snail Cepaea nemoralis from aged and bioremediated soil contaminated with petroleum products

Here, we investigated whether the widely distributed snail Cepaea nemoralis could be used as a suitable sentinel animal for assessing the effects of soil contaminants-petroleum oil derivatives-after years of soil ageing and treatment with a bacterial formulation. Oxidative stress was assessed in the foot and hepatopancreas of C. nemoralis L. exposed to soil contaminated with unleaded petrol, spent engine oil or diesel oil and bioremediated with a bacterial formulation (soil was used 2 years after contamination and bioremediation process). We measured total antioxidant capacity, catalase and glutathione transferase activity and concentrations of superoxide anions, hydrogen peroxide and protein carbonyls in the foot and hepatopancreas of snails after 2 and 4 weeks of treatment. The studied antioxidant responses appeared largely to be tissue and remediation process specific, while the concentrations of superoxide anions, hydrogen peroxide and protein carbonyls depended on time of exposure, tissue type and the type of contaminants, but mostly not on the remediation process. Generally, changes in the concentrations of superoxide anions, hydrogen peroxide and protein carbonyls in the hepatopancreas of snails seemed to be a suitable measure to assess the risk of animals exposed to soil contaminated with petroleum substances and used after many years of ageing and treatment with a microbial formulation.

Environmental Chemical Exposures and Mitochondrial Dysfunction: a Review of Recent Literature

PURPOSE OF REVIEW

Mitochondria play various roles that are important for cell function and survival; therefore, significant mitochondrial dysfunction may have chronic consequences that extend beyond the cell. Mitochondria are already susceptible to damage, which may be exacerbated by environmental exposures. Therefore, the aim of this review is to summarize the recent literature (2012-2022) looking at the effects of six ubiquitous classes of compounds on mitochondrial dysfunction in human populations.

RECENT FINDINGS

The literature suggests that there are a number of biomarkers that are commonly used to identify mitochondrial dysfunction, each with certain advantages and limitations. Classes of environmental toxicants such as polycyclic aromatic hydrocarbons, air pollutants, heavy metals, endocrine-disrupting compounds, pesticides, and nanomaterials can damage the mitochondria in varied ways, with changes in mtDNA copy number and measures of oxidative damage the most commonly measured in human populations. Other significant biomarkers include changes in mitochondrial membrane potential, calcium levels, and ATP levels. This review identifies the biomarkers that are commonly used to characterize mitochondrial dysfunction but suggests that emerging mitochondrial biomarkers, such as cell-free mitochondria and blood cardiolipin levels, may provide greater insight into the impacts of exposures on mitochondrial function. This review identifies that the mtDNA copy number and measures of oxidative damage are commonly used to characterize mitochondrial dysfunction, but suggests using novel approaches in addition to well-characterized ones to create standardized protocols. We identified a dearth of studies on mitochondrial dysfunction in human populations exposed to metals, endocrine-disrupting chemicals, pesticides, and nanoparticles as a gap in knowledge that needs attention.

Association between fetal exposure to polycyclic aromatic hydrocarbons and low birth weight: a case-control study in Shenzhen, China

The potential hazards of polycyclic aromatic hydrocarbons (PAHs) on fetus development have raised widespread concerns in recent years, although current epidemiological findings are conflicting. The aim of this case-control study was to investigate the relationship between PAH concentrations in maternal serum and low birth weight (LBW). A questionnaire survey was conducted among 144 (72 pairs) neonates with normal or LBW and their mothers at four different hospitals in Shenzhen, China. Peripheral blood from primiparas and umbilical cord blood from neonates were collected. Concentrations of PAHs were determined by gas chromatography-mass spectrometry. The detection frequencies of PAHs were relatively higher in the peripheral blood samples, while levels of low molecular weight PAHs were greater than high molecular weight PAHs in both peripheral and umbilical cord blood samples. Phenanthrene was frequently detected in blood samples from the case and control groups. Logistic regression analysis showed that acenaphthene in peripheral blood was positively associated with LBW (p < 0.05). This study found a relationship between exposure to certain PAHs and LBW, although future studies are needed to confirm these results.

Recent advances in the analysis of polycyclic aromatic hydrocarbons in food and water

Polycyclic aromatic hydrocarbons (PAHs), a class of harmful and persistent organic contaminant, are widely distributed in the environment and eventually accumulated in water and food. Also, they are formed in different varieties and varying amounts during processing of food depending on the food composition, cooking method and processing condition. According to the International Agency for Research on Cancer (IARC), various PAHs are classified under Group 1 to 3 category, with Group 1 designated as carcinogenic to humans, Group 2A as probable carcinogen, Group 2B as possible carcinogen and Group 3 as noncarcinogenic. Therefore, it is imperative to develop rapid and highly sensitive analytical methods for determination of PAHs in food and water. This article aims to overview the recent advances of various chromatographic methods as well as electrochemical and SERS-based optical sensing methods for analysis of PAHs in food and water. Initially, several conventional sample preparation methods along with the advanced extraction for isolation of PAHs were summarized, followed by reviewing various gas chromatographic methods coupled with various detection techniques for PAHs analysis in various food products including meat/meat products, seafood, oil, milk/milk products, baby foods, honey, vegetable, cocoa products, tea/coffee, juice, rice, flour, noodle and cake. In addition, high performance liquid chromatographic methods coupled with fluorescence, diode array or mass/tandem mass detection techniques as well as an emerging supercritical fluid chromatographic technique employed for determination of PAHs in different food and water matrices were also overviewed. Finally, various electrochemical sensors and SERS-based optical sensors developed recently for onsite detection of PAHs were tabulated and discussed. Thus, this review article can provide a research update on chromatography and sensor-based analytical methods for PAH analysis as well as enable elucidation of research gaps for future studies.

Burkholderia vietnamiensis G4 as a biological agent in bioremediation processes of polycyclic aromatic hydrocarbons in sludge farms

Polycyclic aromatic hydrocarbons (PAHs) are one of the main pollutants generated by the refining and use of oil. To search bioremediation alternatives for these compounds, mainly in situ, considering the biotic and abiotic variables that affect the contaminated sites is determinant for the success of bioremediation techniques. In this study, bioremediation strategies were evaluated in situ, including biostimulation and bioaugmentation for 16 priority PAHs present in activated sludge farms. B. vietnamiensis G4 was used as a biodegradation agent for bioaugmentation tests. The analyses occurred for 12 months, and temperature and humidity were measured to verify the effects of these factors on the biodegradation. We used the technique GC-MS to evaluate and quantify the degradation of PAHs over the time of the experiment. Of the four treatments applied, bioaugmentation with quarterly application proved to be the best strategy, showing the degradation of compounds of high (34.4% annual average) and low (21.9% annual average) molecular weight. A high degradation rate for high molecular weight compounds demonstrates that this technique can be successfully applied in bioremediation of areas with compounds considered toxic and stable in nature, contributing to the mitigation of impacts generated by PAHs.

Emerging bio-dispersant and bioremediation technologies as environmentally friendly management responses toward marine oil spill: A comprehensive review

Marine oil spills emanating from wells, pipelines, freighters, tankers, and storage facilities draw public attention and necessitate quick and environmentally friendly response measures. It is sometimes feasible to contain the oil with booms and collect it with skimmers or burn it, but this is impracticable in many circumstances, and all that can be done without causing further environmental damage is adopting natural attenuation, particularly through microbial biodegradation. Biodegradation can be aided by carefully supplying biologically accessible nitrogen and phosphorus to alleviate some of the microbial growth constraints at the shoreline. This review discussed the characteristics of oil spills, origin, ecotoxicology, health impact of marine oils spills, and responses, including the variety of remedies and responses to oil spills using biological techniques. The different bioremediation and bio-dispersant treatment technologies are then described, with a focus on the use of green surfactants and their advances, benefits/drawbacks. These technologies were thoroughly explained, with a timeline of research and recent studies. Finally, the hurdles that persist as a result of spills are explored, as well as the measures that must be taken and the potential for the development of existing treatment technologies, all of which must be linked to the application of integrated procedures.

Chronic toxicity of tire crumb rubber particles to mummichog (Fundulus heteroclitus) in episodic exposures

Microrubber (MR) encompasses all tire-related particles in the micro-scale and has recently drawn increased attention as a subclass of the broader group of microplastics. While tire particles entered the environment since the introduction of rubber tires for vehicles, the concern regarding tire wear particles (TWP) as an environmental contaminant is relatively new. Recent studies have examined physical and chemical toxicity of MR particles and leachates to a variety of organisms. However, there is a lack of information on the long-term effects of tire particle exposure under environmentally realistic conditions. The current study examined the chronic toxicity of crumb rubber (CR) particles to the estuarine fish species, mummichog (Fundulus heteroclitus) under episodic exposures at environmentally relevant concentrations. Immunohistochemistry (IHC) of fish gill, intestine, and liver was performed to assess CYP1A induction in these organs. Bile fluorescence was measured as an indicator of exposure to polycyclic aromatic hydrocarbons (PAHs) from CR. DNA damage was measured through the formation of 8-hydroxy-2'-deoxyguanosine (8-OHdG) together with other oxidative stress measures as lipid peroxidation (TBARS assay), free glutathione (GSH), and oxidized glutathione (GSSG) concentrations. Upregulation of CYP1A in gill, intestine, and liver was observed especially in gill filaments and general vasculature. Increased bile fluorescence demonstrated exposure to aromatic compounds, especially pyrene-like PAHs. Data for DNA damage indicated greater plasma 8-OHdG concentrations as a result of increased DNA repair. There was a decrease in malondialdehyde (MDA) production and an increase in total GSH at higher concentrations of CR. It appeared that under long-term repeated dosing, antioxidant systems in mummichog were upregulated to deal with exogenous stressors released by the CR particles. Combined, these data demonstrate that fish exposed to tire crumb rubber particles illicit significant biomarker responses under environmentally relevant CR concentrations, but induced antioxidant and detoxification pathways may prevent mortality and serious physiological effects in F. heteroclitus when exposed to environmentally relevant concentrations of CR.

Evaluation of three extraction methods for the isolation of PAHs from recycled paperboard materials intended for food contact applications

The present work is part of a comprehensive study aiming to identify and quantify an array of harmful contaminants at very low concentrations in recycled paperboard materials intended for food contact applications. In this initial study, three commonly used extraction techniques were optimized and tested for their efficacy and accuracy in isolating 13 polycyclic aromatic hydrocarbons (PAHs) from three commercially available food packaging materials made from recycled paperboard. The techniques were Soxtec extraction (SE), ultrasound-assisted extraction (UAE), and headspace solid-phase microextraction (HS-SPME), followed by gas chromatography-mass spectrometry (GC/MS) analysis. The recoveries of all three methods were rather satisfactory; 10 out of 13 substances were recovered at rates between 70 and 124% using the SE method, 8 out of 13 substances were recovered at rates between 50 and 134% using the UAE method, and finally, 8 out of 13 substances were recovered at rates between 70 and 105% using the HS-SPME method. Regarding accuracy, the HS-SPME method gave the best results at 125 μg kg−1, as 7 out of 13 concentration values were within acceptable limits, while only five and four concentration values were within limits for the UAE and SE methods, respectively. Furthermore, the results of both the calculated RSD and HorRat values indicated that HS-SPME is more accurate for extracting PAHs than the other two methods.