Nanoparticles in the environment: where do we come from, where do we go to?

A high throughput method to investigate nanoparticle entrapment efficiencies in biofilms

The commercial use of nanoparticles has increased in recent years due to their unique characteristics, including high surface area, modifiable shape and surface charge and size-dependent properties. Consequently, a greater number of nanomaterials are now being released into the environment and inevitably interact with the natural ecosystem. Bacterial biofilms have the potential to capture and retain nanoparticles, however the factors determining the specific nanoparticle entrapment efficiencies of biofilms are not yet fully understood. Based on fluorescent intensity measurements we developed a simple and straightforward method that allowed the entrapment of different silica nanoparticles by two Pseudomonas strains to be quantified. It was determined that, regardless of nanoparticle size or surface functionalisation, Pseudomonas putida biofilms showed enhanced entrapment efficiencies compared to Pseudomonas fluorescens biofilms. It was also noted that both biofilms showed a higher entrapment capacity towards positively charged NPs. The method developed has the potential to be utilized for high throughput biofilm screening studies in order to develop a new understating of the relationship between nanoparticle characteristics and its uptake by bacterial biofilms.

Toxicity of Carbon, Silicon, and Metal-Based Nanoparticles to the Hemocytes of Three Marine Bivalves

Simple Summary

The growing nanotechnology industry disposes of a variety of nanoparticles with different physiochemical properties in everyday life. However, the dependence of the safety and toxicity of nanoparticles on their physicochemical properties remains unclear. Bivalve molluscs represent an efficient model for the investigation of nanoparticle toxicity owing to their filtrating ability and feeding on particles suspended in the water. Moreover, the blood cells of bivalve molluscs, the hemocytes, have been suggested as a good analog test-object to mammalian immune cells, phagocytes. In this study, we used hemocytes of three marine bivalve species, namely, Crenomytilus grayanus, Modiolus modiolus, and Arca boucardi, to evaluate and compare the toxic effects of 10 different types of nanoparticles. We gave short-term exposure of the nanoparticles to the hemocytes and registered viability and changes in their cell membrane polarization by employing flow cytometry. Metal-based nanoparticles were the most toxic to the cells of all three tested bivalve mollusc species. However, the sensitivity to different nanoparticle types varied between species. Moreover, the registered cell membrane depolarization indicated an early toxic response and raised concern that chronic long-term exposure of nanoparticles (even if they were previously declared as safe) is a serious threat for aquatic organisms.

Abstract

Nanoparticles (NPs) have broad applications in medicine, cosmetics, optics, catalysis, environmental purification, and other areas nowadays. With increasing annual production of NPs, the risks of their harmful influence on the environment and human health are also increasing. Currently, our knowledge about the mechanisms of the interaction between NPs and living organisms is limited. The marine species and their habitat environment are under continuous stress owing to the anthropogenic activities, which result in the release of NPs in the aquatic environment. We used a bioassay model with hemocytes of three bivalve mollusc species, namely, Crenomytilus grayanus, Modiolus modiolus, and Arca boucardi, to evaluate the toxicity of 10 different types of NPs. Specifically, we compared the cytotoxic effects and cell-membrane polarization changes in the hemocytes exposed to carbon nanotubes, carbon nanofibers, silicon nanotubes, cadmium and zinc sulfides, Au-NPs, and TiO₂ NPs. Viability and the changes in hemocyte membrane polarization were measured by the flow cytometry method. The highest aquatic toxicity was registered for metal-based NPs, which caused cytotoxicity to the hemocytes of all the studied bivalve species. Our results also highlighted different sensitivities of the used tested mollusc species to specific NPs.

Asymmetrical Flow Field Flow Fractionation Coupled to Nanoparticle Tracking Analysis for Rapid Online Characterization of Nanomaterials

Increasing applications of nanomaterials in consumer goods, industrial products, medical practices, etc., calls for the development of tools for rapid separation, quantification, and sizing of nanoparticles to ensure their safe and sustainable employment. While many techniques are available for characterization of pure, homogeneous nanomaterial preparations, particle sizing and counting remains difficult for heterogeneous mixtures that resulted from imperfect synthesis conditions, aggregation from product instability, or degradation during storage. Herein, nanoparticle tracking analysis (NTA) was coupled to asymmetrical flow field flow fraction (AF4) using a splitter manifold to enable online particle separation and counting. The high pressure and flow rate in AF4 were reduced to the levels compatible with NTA by the proper flow splitting design, and a syringe pump was employed to withdraw fluid through the exit port of the NTA and maintain consistent flow rates entering NTA for proper particle sizing. Successful AF4-NTA coupling was demonstrated by analyzing a mixture of polystyrene particles with the average diameters of ∼50, 100, and 200 nm. Good correlation was observed between the amount of each type of particle injected to and measured by the hyphenated system. The particle concentrations acquired using online and offline coupling of AF4-NTA also agreed well with each other. The nonspherical nanoparticles like gold nanorods and hexagonal boron nitride nanosheets were also analyzed to demonstrate the versatile applicability of this system. Our work has proved that AF4-NTA can achieve accurate online particle counting on different populations of the nanomaterials in a mixture, which cannot be done by either AF4 or NTA alone. It will be a valuable tool for rapid characterization of heterogeneous nanomaterial solutions without purification to fulfill the regulation requirement on the nanomaterial-containing products.

Removal of Chromium from Synthetic Wastewater Using Modified Maghemite Nanoparticles

The main aim of this study was to ascertain the removal of chromium ions from synthetic wastewater using modified maghemite nanoparticles (MNPs). Commercially available maghemite nanoparticles (NPs) (< 50 nm) were modified using sodium dodecyl sulfate (SDS). The MNPs were characterized using a powder X-ray diffractometer (XRD) and Fourier transform infrared spectrophotometer (FTIR). Statistically designed batch experiments were carried out to evaluate the effects of various parameters, namely the pH of the solution, initial chromium concentration, and adsorbent dose, on the chromium removal efficiency (RE). The results from this study showed that the adsorbent dose had a synergistic effect on chromium RE, while pH and initial chromium concentration had antagonistic effects on the RE. An optimal chromium RE of 95.8% was obtained at pH = 2.6, adsorbent dose = 5 g/L, and initial chromium concentration = 20 mg/L. The analysis of variance (ANOVA) results showed that the model was significant, with high F value (F = 80.07) and low P value (P = < 0.001). Based on the results obtained from the experiments, the MNPs could be exploited as an efficient adsorbent for chromium removal from wastewater.

Identification of inhalable rutile and polycyclic aromatic hydrocarbons (PAHs) nanoparticles in the atmospheric dust

Addressing the presence of rutile nanoparticles (NPs) in the air is a work in progress, and the development of methodologies for the identification of NPs in atmospheric dust is essential for the assessment of its toxicological effects. To address this issue, we selected the fast growing desertic city of Hermosillo in northern Mexico. Road dust (n = 266) and soils (n = 10) were sampled and bulk Ti-contents were tested by portable X-ray fluorescence. NPs were extracted from atmospheric dust by PM_1.0-PTFE filters and further characterized by Confocal Raman Microscopy, Energy-dispersive X-ray spectroscopy (EDS) coupled to Transmission Electron Microscopy (TEM) and Scanning Electron Microscopy (SEM). Results showed (i) the average concentration of Ti in road dust (3447 mg kg^-1) was similar to natural values and worldwide urban dusts; (ii) the bulk geochemistry was not satisfactory for Ti-NPs identification; (iii) 76% of the total extracted PM_1.0 sample corresponded to NPs; (iv) mono-microaggregates of rutile NPs were identified; (v) ubiquitous polycyclic aromatic hydrocarbons (PAHs) were linked to NPs. The genotoxicity of rutile and PAHs, in connection with NPs content, make us aware of a crucial emerging environmental issue of significant health concern, justifying further research in this field.

Transformation pathways and fate of engineered nanoparticles (ENPs) in distinct interactive environmental compartments: A review

The ever increasing production and use of nano-enabled commercial products release the massive amount of engineered nanoparticles (ENPs) in the environment. An increasing number of recent studies have shown the toxic effects of ENPs on different organisms, raising concerns over the nano-pollutants behavior and fate in the various environmental compartments. After the release of ENPs in the environment, ENPs interact with various components of the environment and undergoes dynamic transformation processes. This review focus on ENPs transformations in the various environmental compartments. The transformation processes of ENPs are interrelated to multiple environmental aspects. Physical, chemical and biological processes such as the homo- or hetero-agglomeration, dissolution/sedimentation, adsorption, oxidation, reduction, sulfidation, photochemically and biologically mediated reactions mainly occur in the environment consequently changes the mobility and bioavailability of ENPs. Physico-chemical characteristics of ENPs (particle size, surface area, zeta potential/surface charge, colloidal stability, and core-shell composition) and environmental conditions (pH, ionic strength, organic and inorganic colloids, temperature, etc.) are the most important parameters which regulated the ENPs environmental transformations. Meanwhile, in the environment, organisms encountered multiple transformed ENPs rather than the pristine nanomaterials due to their interactions with various environmental materials and other pollutants. Thus it is the utmost importance to study the behavior of transformed ENPs to understand their environmental fate, bioavailability, and mode of toxicity.

The Current Understanding of Autophagy in Nanomaterial Toxicity and Its Implementation in Safety Assessment-Related Alternative Testing Strategies

Nanotechnology has rapidly promoted the development of a new generation of industrial and commercial products; however, it has also raised some concerns about human health and safety. To evaluate the toxicity of the great diversity of nanomaterials (NMs) in the traditional manner, a tremendous number of safety assessments and a very large number of animals would be required. For this reason, it is necessary to consider the use of alternative testing strategies or methods that reduce, refine, or replace (3Rs) the use of animals for assessing the toxicity of NMs. Autophagy is considered an early indicator of NM interactions with cells and has been recently recognized as an important form of cell death in nanoparticle-induced toxicity. Impairment of autophagy is related to the accelerated pathogenesis of diseases. By using mechanism-based high-throughput screening in vitro, we can predict the NMs that may lead to the generation of disease outcomes in vivo. Thus, a tiered testing strategy is suggested that includes a set of standardized assays in relevant human cell lines followed by critical validation studies carried out in animals or whole organism models such as C. elegans (Caenorhabditis elegans), zebrafish (Danio rerio), and Drosophila (Drosophila melanogaster)for improved screening of NM safety. A thorough understanding of the mechanisms by which NMs perturb biological systems, including autophagy induction, is critical for a more comprehensive elucidation of nanotoxicity. A more profound understanding of toxicity mechanisms will also facilitate the development of prevention and intervention policies against adverse outcomes induced by NMs. The development of a tiered testing strategy for NM hazard assessment not only promotes a more widespread adoption of non-rodent or 3R principles but also makes nanotoxicology testing more ethical, relevant, and cost- and time-efficient.

A Multiparametric Study of Internalization of Fullerenol C60(OH)36 Nanoparticles into Peripheral Blood Mononuclear Cells: Cytotoxicity in Oxidative Stress Induced by Ionizing Radiation

The aim of this study was to investigate the uptake and accumulation of fullerenol C₆₀(OH)₃₆ into peripheral blood mononuclear cells (PBMCs). Some additional studies were also performed: measurement of fullerenol nanoparticle size, zeta potential, and the influence of fullerenol on the ionizing radiation-induced damage to PMBCs. Fullerenol C₆₀(OH)₃₆ demonstrated an ability to accumulate in PBMCs. The accumulation of fullerenol in those cells did not have a significant effect on cell survival, nor on the distribution of phosphatidylserine in the plasma membrane. However, fullerenol-induced depolarization of the mitochondrial membrane proportional to the compound level in the medium was observed. Results also indicated that increased fullerenol level in the medium was associated with its enhanced transport into cells, corresponding to its influence on the mitochondrial membrane. The obtained results clearly showed the ability of C₆₀(OH)₃₆ to enter cells and its effect on PBMC mitochondrial membrane potential. However, we did not observe radioprotective properties of fullerenol under the conditions used in our study.

Routine, ensemble characterisation of electrophoretic mobility in high and saturated ionic dispersions

With the industrialisation of nanoparticle manufacture, the pervasive incursion of nanoparticles into the environment, the need to characterise nano-scale pharmaceuticals and living systems in replicated in vivo conditions, the continuing development of new theories to describe the electro-kinetic behaviour of nano-particles in representative ionic strengths and numerous other applications, there is an urgent requirement to provide simple and effective experimental tools to validate these models and explore new systems. Micro-electrophoresis implemented with a diffusion barrier, which isolates the dispersed phase from the electrode surface, is demonstrated as enabling such measurements for the first time, preventing the catastrophic outgassing, precipitation and sample degradation observed when the dispersed phase is in close proximity to the electrode surface. Using a measurement of a few minute's duration in a standard laboratory light scattering instrument we reproduce the theoretically predicted phenomena of asymptotic, non-zero electrophoretic mobility with increasing ionic strength, the cationic Hofmeister series dependency, charge inversion and a continuously decreasing variation in mobility with pH as molarity increases. Standard operating procedures are developed and included to encourage further work.

Bioengineered Polyhydroxyalkanoates as Immobilized Enzyme Scaffolds for Industrial Applications

Enzymes function as biocatalysts and are extensively exploited in industrial applications. Immobilization of enzymes using support materials has been shown to improve enzyme properties, including stability and functionality in extreme conditions and recyclability in biocatalytic processing. This review focuses on the recent advances utilizing the design space of in vivo self-assembled polyhydroxyalkanoate (PHA) particles as biocatalyst immobilization scaffolds. Self-assembly of biologically active enzyme-coated PHA particles is a one-step in vivo production process, which avoids the costly and laborious in vitro chemical cross-linking of purified enzymes to separately produced support materials. The homogeneous orientation of enzymes densely coating PHA particles enhances the accessibility of catalytic sites, improving enzyme function. The PHA particle technology has been developed into a remarkable scaffolding platform for the design of cost-effective designer biocatalysts amenable toward robust industrial bioprocessing. In this review, the PHA particle technology will be compared to other biological supramolecular assembly-based technologies suitable for in vivo enzyme immobilization. Recent progress in the fabrication of biological particulate scaffolds using enzymes of industrial interest will be summarized. Additionally, we outline innovative approaches to overcome limitations of in vivo assembled PHA particles to enable fine-tuned immobilization of multiple enzymes to enhance performance in multi-step cascade reactions, such as those used in continuous flow bioprocessing.

Bacteria-nanoparticle interactions in the context of nanofouling

The attachment of microbial communities to surfaces is a well-known problem recognized to be involved in a variety of critical issues in the sectors of food processing, chronic wounds, infection from implants, clogging of membranes and corrosion of equipment. Considering the importance of the detrimental impact of biofouling, it has received much attention in the scientific community and from concerned stakeholders. With the development of nanotechnology and the nowadays widespread use of engineered nanoparticles (ENPs), concerns have been raised regarding their fate in terrestrial and aquatic environments. Safety aspects and public health issues are critical in the management of handling nanomaterials and their nanowastes. The interactions of various types of nanoparticles (NPs) with planktonic bacteria have also received attention due to their antimicrobial properties. However, their behavior in regard to biofilms is not well understood although, in the environment, most of the bacteria prefer living in sessile communities. The question appears relevant considering the need to build knowledge on the fate of nanoparticles and the fact that no one can exclude the risk of accumulation of nanoparticles in biofilms and on surfaces leading to a form of nanofouling involving both engineered nanoparticles (ENPs) and nanoplastics. The present analysis of recent research accounts allows in identifying that (1) research activities related to water remediation systems have been mostly oriented on the impact of NPs on pre-existing biofilms, (2) experimental designs are restricted to few scenarios of exposure, usually limited to relative short-time periods although nanofouling could favour the development of multi-resistant bacterial species through sub-lethal exposures over prolong periods of time (3) nanofouling in other systems in which biofilms develop remains to be addressed, and (4) new research directions are required for investigating the mechanisms involved and the subsequent impact of nanofouling on bacterial consortium responses encountered in a variety of environments such as those prevailing in food production/processing settings. Finally, this review aims at providing recent information and insights on nanoparticle-bacterial interactions in the context of biofilms in order to supply an updated outlook of research perspectives that could help establish the framework for production, use and fate of nanomaterials as well as future research directions.

Silver nanoparticle toxicity effect on the seagrass Halophila stipulacea

Information on silver nanoparticle (AgNP) phytotoxicity on seagrasses is provided for the first time. Toxic effects of environmentally relevant AgNP concentrations on Halophila stipulacea were assessed to identify sensitive biomarkers, to determine threshold effect concentrations and to evaluate potential risks. Potential alterations in the cytoskeleton, endoplasmic reticulum, cell ultrastructure and viability, oxidative stress parameters and elongation in H. stipulacea leaves exposed to AgNP concentrations ranging from 0.0002 to 0.2 mg L^-1 for 8 days were examined. The first signs of actin filament (AF) response in differentiating cells, exhibiting disorientation and slight bundling, were observed on the 4th day at 0.0002 mg L^-1, while at the end of the experiment and at the higher concentrations, AFs were extremely bundled. Endoplasmic reticulum was affected in meristematic and differentiating cells; massive aggregations and loss of the "grainy" structure were observed, initially on the 6th day at 0.002 mg L^-1. Effects on microtubules were detected on the last day at 0.2 mg L^-1. An increase in H₂O₂ levels on the 4th and/or 6th day even at 0.0002 mg L^-1 was followed by a decrease on, or up to the last day. On the 6th day at the lowest concentration, elevated malondialdehyde content, and superoxide dismutase and peroxidase activity were detected, indicating oxidative damage and antioxidant defense mechanism activation. Dead epidermal cells mainly occurred at 0.02 and 0.2 mg L^-1, while no dead vein cells were detected. A significant inhibition in leaf elongation was observed only at 0.2 mg L^-1. Therefore, AF disturbance in differentiating leaf cells, being a susceptible response parameter, could be regarded as an early warning indicator of risk posed by AgNPs to H. stipulacea meadows, while most of the remaining parameters examined also constitute useful biomarkers. The lowest observed effect concentration (0.0002 mg L^-1), being within the range of environmentally relevant AgNPs concentrations, suggests the possibility of negative impacts of AgNPs on seagrass health. A risk quotient of 1.33 was calculated, indicating that AgNPs may pose a significant potential risk to the coastal environment. The data presented highlight the importance of future research to further investigate the seagrass-AgNP interactions, stress the need for a refinement of the environmental risk assessment of AgNPs and could be utilized for the design of biomonitoring programs for rational management of the coastal environment.

Understanding effect of interaction of nanoparticles and antibiotics on bacteria survival under aquatic conditions: Knowns and unknowns

The review provides a comprehensive overview of the available state-of-the-art of nanoparticles (NPs) and antibiotics (ABs) occurrence and their fate in the natural aquatic settings by addressing different research questions and the challenges faced while addressing those questions. Firstly, understand the interaction of NPs and ABs with themselves in addition to other matrix components (presence of natural organic matter, bacteria, biofilms, other anthropogenic pollutants and metals from natural sources). Secondly, summarize the bactericidal activity of NP and AB due to reactive oxygen species (ROS) production. The complete information was gathered from database and analysed as per the conjectured questions under laboratory versus environmental-relevant conditions (1. Fate of NPs and ABs, and 2. Will the presence of NPs and ABs alone and their mixtures influence the ROS concentration and antibacterial activity), and proposed six reactions to describe the fate of NP and AB in natural aquatic settings. However, laboratory-based studies revealed that NP and AB fate largely depend on the ionic strength, organic matter content and pH of the matrix whereas field based information is missing about this. The former was performed at sterile conditions using sophisticated instruments and standard protocol as compared to latter and can't be replicated under natural aquatic settings due to lack of: (i) accurate environmental concentration of NPs and ABs, (ii) knowledge of bacterial type and their concentration, (iii) optimized protocol and tracking systems. The author's recommendation is to verify the proposed reactions experimentally by using the frequently found pairs of NPs and ABs in the natural aquatic settings. Further, ranked them on their decreasing order of toxicity and informed regulatory bodies for further action. Overall research is needed in the suggested directions to reduce uncertainty behind the impacts of NPs and ABs on the aquatic settings and their role in bactericidal activity.

Partitioning and stability of ionic, nano- and microsized zinc in natural soil suspensions

Batch experiments aimed at solid-liquid distribution of 40 nm engineered zinc oxide nanoparticles (ZnO-NP), microparticles (bulk ZnO), and ionic Zn in ZnSO₄ solution were conducted on eight field soil samples of different characteristics to identify how the form of Zn affects its distribution in soil. The concentration of Zn in different size fractions present in supernatant solutions obtained from centrifuged soil suspensions was also measured. The distribution between a liquid and a solid was different for the ionic Zn (ZnSO₄) and particulate Zn (ZnO-NP and bulk ZnO). In acidic soil solutions, the partitioning coefficient (K_dA) of the ionic Zn was in range of 14.7-15.9 compared to 133.4-194.1 for ZnO-NP and bulk ZnO. The situation was reversed under alkaline conditions resulting in a decreased retention of particulate forms of Zn by the solids, with ZnO-NP showing K_dA of 8.5-23.4 compared to 160.0-760.1 of ionic Zn. Soil pH thus appears to be the predominant factor influencing the solid-liquid distribution of Zn in different forms. Even the distribution of Zn in different size fractions is heavily affected by the soil pH, causing dissolution of ZnO-NP and bulk ZnO in acidic soils. In alkaline soils, applied ionic Zn (ZnSO₄) remained dissolved. This study shows that ZnO-NP are the most mobile of the three tested forms of Zn in alkaline soils. This may affect the spatial distribution of Zn in soil and potentially increase the effectivity of the application of Zn fertilizer when in nanoparticle form.

Analysis of the Exposure of Organisms to the Action of Nanomaterials

The rapid development of the production of materials containing metal nanoparticles and metal oxides is a potential risk to the environment. The degree of exposure of organisms to nanoparticles increases from year to year, and its effects are not fully known. This is due to the fact that the range of nanoparticle interactions on cells, tissues and the environment requires careful analysis. It is necessary to develop methods for testing the properties of nanomaterials and the mechanisms of their impact on individual cells as well as on entire organisms. The particular need to raise public awareness of the main sources of exposure to nanoparticles should also be highlighted. This paper presents the main sources and possible routes of exposure to metal nanoparticles and metal oxides. Key elements of research on the impact of nanoparticles on organisms, that is, in vitro tests, in vivo tests and methods of detection of nanoparticles in organisms, are presented.

A method for the separation of TiO2 nanoparticles from Water through encapsulation with lecithin liposomes followed by adsorption onto poly(L-lysine) coated glass surfaces

Increasing use of nanomaterials in the consumer and pharmaceutical industries has led to emerging contamination by released nanoparticles in wastewater and drinking water, causing major concerns for public health. Titanium dioxide (TiO₂) nanoparticles are one of the major nanoparticles of growing concern with a strong need for efficient removal. In this work, removal of TiO₂ nanoparticles from water was investigated by first coating with polydopamine (PDA) and then encapsulating within lecithin liposomes for adsorption onto poly-l-lysine (PLL) coated glass surfaces. The PLL coating was confirmed using atomic force microscopy, with a thickness of 30 nm. An average percent removal of 58% with a standard deviation of 18% was obtained for concentrations ranging from 5 mg/L to 125 mg/L following capture experiments. This method provides a promising solution to alleviate the potential health hazard caused by TiO₂ nanoparticles. It is minimally affected by such water quality variables as alkalinity, ionic strength and humic acid. No coagulation, flocculation and sedimentation stages are necessary.

Tailor-engineered plasmonic single-lattices: harnessing localized surface plasmon resonances for visible-NIR light-enhanced photocatalysis

A platform material composed of 2D gold (Au) nanodot plasmonic single-lattices (Au-nD-PSLs) featuring tailor-engineered geometric features for visible-NIR light-driven enhanced photocatalysis is presented.

Effect of silver nanoparticles on gill membranes of common carp: Modification of fatty acid profile, lipid peroxidation and membrane fluidity

Although the toxicity of silver nanoparticles (AgNPs) in aquatic organisms has been extensively investigated, the mechanism by which AgNPs damage membranes remains unclear. This study investigated the toxic effects of a series of sub-lethal concentrations of AgNPs on the membranes of freshwater carp (Cyprinus carpio) gills, based on changes in membrane fatty acid (FA) profile, membrane fluidity, membrane lipid peroxidation, and histopathology. Most of the FAs in fish gill membrane was not significantly affected by exposure to multiple AgNPs concentrations, only few significant changes occurred in some specific FAs species at a high concentration of AgNPs exposure. In particular, high concentrations of AgNPs significantly decreased the proportions of two important long-chain n-3 series polyunsaturated FAs (C20: 5n3, and C22: 6n3), resulting in a decreased ratio of n-3 polyunsaturated FAs to n-6 polyunsaturated FAs (Σn-3UFA/Σn-6UFA). The AgNPs also caused a dose-dependent decrease in fish gill membrane fluidity, increased the level of lipid peroxidation, and inhibited Na⁺/K⁺-ATPase enzyme activity. Further histopathological examination revealed that exposure to AgNPs can cause toxic responses in the lamellae, including the thinning of the basement membrane, malformation, and inflammation. Together, the results suggest that the mechanism of AgNPs membrane toxicity involves the oxidization of long-chain omega-3 unsaturated FAs to saturated FAs via lipid peroxidation, resulting in, decreased membrane fluidity and ultimately the destruction of the normal physiological function of the fish gill membrane. The findings contribute significantly to our understanding of nanoparticle-induced membrane toxicity and potential risks in aquatic environments.

ZnO and CuO nanoparticles: a threat to soil organisms, plants, and human health

The progressive increase in nanoparticles (NPs) applications and their potential release into the environment because the majority of them end up in the soil without proper care have drawn considerable attention to the public health, which has become an increasingly important area of research. It is required to understand ecological threats of NPs before applications. Once NPs are released into the environment, they are subjected to translocation and go through several modifications, such as bio/geo-transformation which plays a significant role in determination of ultimate fate in the environment. The interaction between plants and NPs is an important aspect of the risk assessment. The plants growing in a contaminated medium may significantly pose a threat to human health via the food chain. Metal oxide NPs ZnO and CuO, the most important NPs, are highly toxic to a wide range of organisms. Exposure and effects of CuO and ZnO NPs on soil biota and human health are critically discussed in this study. The potential benefits and unintentional dangers of NPs to the environment and human health are essential to evaluate and expected to produce less toxic and more degradable NPs to minimize the environmental risk in the future.

The Toxicity of Nanoparticles to Organisms in Freshwater

Nanotechnology is a rapidly growing industry yielding many benefits to society. However, aquatic environments are at risk as increasing amounts of nanoparticles (NPs) are contaminating waterbodies causing adverse effects on aquatic organisms. In this review, the impacts of environmental exposure to NPs, the influence of the physicochemical characteristics of NPs and the surrounding environment on toxicity and mechanisms of toxicity together with NP bioaccumulation and trophic transfer are assessed with a focus on their impacts on bacteria, algae and daphnids. We identify several gaps which need urgent attention in order to make sound decisions to protect the environment. These include uncertainty in both estimated and measured environmental concentrations of NPs for reliable risk assessment and for regulating the NP industry. In addition toxicity tests and risk assessment methodologies specific to NPs are still at the research and development stage. Also conflicting and inconsistent results on physicochemical characteristics and the fate and transport of NPs in the environment suggest the need for further research. Finally, improved understanding of the mechanisms of NP toxicity is crucial in risk assessment of NPs, since conventional toxicity tests may not reflect the risks associated with NPs. Behavioural effects may be more sensitive and would be efficient in certain situations compared with conventional toxicity tests due to low NP concentrations in field conditions. However, the development of such tests is still lacking, and further research is recommended.

Interaction of Copper-Based Nanoparticles to Soil, Terrestrial, and Aquatic Systems: Critical Review of the State of the Science and Future Perspectives

In the past two decades, increased production and usage of metallic nanoparticles (NPs) have inevitably increased their discharge into the different compartments of the environment, which ultimately paved the way for their uptake and accumulation in various trophic levels of the food chain. Due to these issues, several questions have been raised on the usage of NPs in everyday life and have become a matter of public health concern. Among the metallic NPs, Cu-based NPs have gained popularity due to their cost-effectiveness and multifarious promising uses. Several studies in the past represented the phytotoxicity of Cu-based NPs on plants. However, comprehensive knowledge is still lacking. Additionally, the impact of Cu-based NPs on soil organisms such as agriculturally important microbes, fungi, mycorrhiza, nematode, and earthworms is poorly studied. This review article critically analyses the literature data to achieve a more comprehensive knowledge on the toxicological profile of Cu-based NPs and increase our understanding of the effects of Cu-based NPs on aquatic and terrestrial plants as well as on soil microbial communities. The underlying mechanism of biotransformation of Cu-based NPs and the process of their penetration into plants have also been discussed herein. Overall, this review could provide valuable information to design rules and regulations for the safe disposal of Cu-based NPs into a sustainable environment.

Toxicity of superparamagnetic iron oxide nanoparticles to the microalga Chlamydomonas reinhardtii

Superparamagnetic iron oxide nanoparticles (SPION) have been widely studied for different biomedical and environmental applications. In this study we evaluated the toxicity and potential alterations of relevant physiological parameters caused to the microalga Chlamydomonas reinhardtii (C. reinhardtii) upon exposure to SPION. The results showed dose-dependent toxicity. A mechanistic study combining flow cytometry and physiological endpoints showed a toxic response consisting of a decrease in metabolic activity, increased oxidative stress and alterations in the mitochondrial membrane potential. Additionally, and due to the light absorption of SPION suspensions, we observed a significant shading effect, causing a marked decrease in photosynthetic activity. In this work, we demonstrated for the first time, the internalization of SPION by endocytosis in C. reinhardtii. These results demonstrated that SPION pose a potential risk for the environment if not managed properly.

Study of Zn availability, uptake, and effects on earthworms of zinc oxide nanoparticle versus bulk applied to two agricultural soils: Acidic and calcareous

The increasing use of zinc oxide nanoparticles (ZnO NPs) in agriculture renders it necessary to evaluate their impact on soil non-target organisms. This work studies Zn availability to earthworms from the ZnO (NP and bulk) applied to two agricultural soils with a different pH at 20, 225, 500, and 1000 mg Zn kg^-1. Zn uptakes and the effects on Eisenia andrei, grown under controlled conditions, were determined. Effects were assessed at three levels: organisms, mortality, growth and reproduction; biochemical, catalase and glutathione S-transferase activities, malondialdehyde (MDA), and protein content; cellular in coelomocytes, reactive oxygen species (ROS) generation, lysosomal membrane alterations (RN) and mitochondrial dysfunction (MTT). Available Zn was 100-fold higher in acidic than in calcareous soil and did not differ among ZnO (NP or bulk). Zn in worms was auto-regulated regardless of the soil Zn concentration, pH and ZnO size. Effects on mortality and weight were observed only in the acidic soil at the highest concentration, ZnO NPs reduced survival and body weight, while ZnO bulk reduced body weight. Reproduction parameters in acidic soil were: EC50 (fecundity) 277 and 256 mg Zn kg-1 and EC50 (fertility) 177 and 179 mg Zn kg-1 for ZnO NPs and bulk, respectively, with no found NP-specific effects. No responses of enzymatic activities, MDA and MTT were detected. ROS and RN were altered in the coelomocyte cells of earthworms in the two soils, but effects depended on ZnO size suggesting nanospecific effects. Soil pH governs toxicity more than ZnO size regardless of body Zn concentration.

Biological Biosensors for Monitoring and Diagnosis

Quantification and detection of various contaminants in the ecosystem have become critically important in the past few decades due to their exhaustive use in soil and aquatic ecosystems. The contamination by both organic and inorganic contaminants in the ecosystem has drawn attention due to their persistence, biological accumulation, and toxicity. Organic contaminants reach the air, water, food, soil, and other systems through drift mechanism and have detrimental effect on various life systems after entering the food chain, thus interfering the normal biological process of the ecosystem. Inorganic contaminants have less solubility, primarily get adsorbed, and accumulate on lower sediments. The sources of both organic and inorganic contaminants include anthropogenic activities which dispose industrial and sewage effluent directly into water bodies. Most of the contaminants are very much toxic and have tumorigenic, carcinogenic, and mutagenic effect on various life-forms. Biosensors have various prospective and existing applications in the detection of these compounds in the environment by transducing a signal. It also has immense applications in the detection of different contaminants in the food industry, environmental monitoring, disease diagnosis, etc. where reliable and precise analyses are required. This chapter points out a comprehensive glimpse on different biosensors and their characteristics, operating principles, and their designs, based on transduction types and biological components. Efforts have been made to summarize various applications of biosensors in food industry, environmental monitoring, drug delivery systems, and clinical diagnostics etc.

Toxicity Evaluation of Quantum Dots (ZnS and CdS) Singly and Combined in Zebrafish (Danio rerio)

The exponential growth of nanotechnology has led to the production of large quantities of nanomaterials for numerous industrial, technological, agricultural, environmental, food and many other applications. However, this huge production has raised growing concerns about the adverse effects that the release of these nanomaterials may have on the environment and on living organisms. Regarding the effects of QDs on aquatic organisms, existing data is scarce and often contradictory. Thus, more information is needed to understand the mechanisms associated with the potential toxicity of these nanomaterials in the aquatic environment. The toxicity of QDs (ZnS and CdS) was evaluated in the freshwater fish Danio rerio. The fishes were exposed for seven days to different concentrations of QDs (10, 100 and 1000 µg/L) individually and combined. Oxidative stress enzymes (catalase, superoxide dismutase and glutathione S-transferase), lipid peroxidation, HSP70 and total ubiquitin were assessed. In general, results suggest low to moderate toxicity as shown by the increase in catalase activity and lipid peroxidation levels. The QDs (ZnS and CdS) appear to cause more adverse effects singly than when tested combined. However, LPO results suggest that exposure to CdS singly caused more oxidative stress in zebrafish than ZnS or when the two QDs were tested combined. Levels of Zn and Cd measured in fish tissues indicate that both elements were bioaccumulated by fish and the concentrations increased in tissues according to the concentrations tested. The increase in HSP70 measured in fish exposed to 100 µg ZnS-QDs/L may be associated with high levels of Zn determined in fish tissues. No significant changes were detected for total ubiquitin. More experiments should be performed to fully understand the effects of QDs exposure to aquatic biota.

Short-term exposure to low concentrations of copper oxide nanoparticles can negatively impact the ecological performance of a cosmopolitan freshwater fungus

In the past few decades, the use of nano-based products has been expanding, subsequently increasing the risk of aquatic contamination by nanoparticles (NPs). Consequently, it is important to assess the potential risks of environmentally realistic concentrations of NPs. Leaf litter decomposition, a fundamental ecological process in headwater streams, is governed mainly by fungi. In this study, copper oxide nanoparticles (CuO NPs) were synthesised, and the influence of short term exposure to low concentrations of copper oxide nanoparticles on leaf litter decomposition and fungal reproduction (sporulation) was assessed. A cosmopolitan aquatic fungal decomposer species Articulospora tetracladia was used to assess litter decomposition upon exposure to CuO NPs (0.00, 0.04, 0.08 and 0.12 mg L-1) for a short time period (1, 2, 3 and 4 days). Concentrations and exposure time of NPs affected both leaf litter decomposition and sporulation. A significant difference in leaf litter decomposition and fungal sporulation was observed between the control (0.0 mg L-1) and all concentrations tested but not between 0.04, 0.08 and 0.12 mg L-1 of NPs. All the exposure time points (1, 2, 3 and 4 days) had a significant impact on sporulation; however a significant difference in leaf litter mass loss was seen between all time points except for between 2 and 3 days. Overall, our study provides a novel insight into the potential risk of short-term exposure to environmentally realistic concentrations of CuO NPs on the ecological performance of a cosmopolitan freshwater fungus.

The Sustainability Challenge of Food and Environmental Nanotechnology: Current Status and Imminent Perceptions

Nanotechnology is a connection among various branches of science with potential applications that extend over a variety of scientific disciplines, particularly in the food science and technology fields. For nanomaterial applications in food processing, such as antimicrobials on food contact surfaces along with the improvement of biosensors, electrospun nanofibers are the most intensively studied ones. As in the case of every developing skill, an assessment from a sustainability point of view is necessary to address the balance between its benefits to civilization and the unwanted effects on human health and the environment. The current review aimed to provide an update regarding the sustainability of current nanotechnology applications in food science technology, environment, and public health together with a risk assessment and toxicity evaluation.

On how environmental and experimental conditions affect the results of aquatic nanotoxicology on brine shrimp (Artemia salina): A case of silver nanoparticles toxicity

The genus Artemia sp. has been accepted as a reliable model organism for aquatic toxicity and nanotoxicity experiments, as far as the ISO TS 20787 has recently been published to standardize nanotoxicity test with this organism. Experimental and environmental conditions may affect the toxicity of nanomaterials on aquatic organisms including Artemia sp. nauplii. In this study, acute toxicity effects of silver nanoparticles (AgNPs) on the nauplii of Artemia salina was investigated under various conditions (e.g. different lights, salinities, temperatures, volume and agitation of exposure media and instar stages of nauplii). The EC values were calculated using Probit program and all data were analyzed statistically by SPSS software. At all test conditions, the immobilization rate of Artemia nauplii increased in a concentration-dependent manner (P < 0.05). The sensitivity of instar stage II to different concentrations of AgNPs was significantly higher than instar I (P < 0.05). The toxicity effect of AgNPs was affected by alteration of environmental conditions, so that the effective concentration (EC) values for instar I of A. salina decreased with increasing water temperature, decreasing water salinity and in continuous darkness condition. The EC₅₀ value of AgNPs was significantly lower in 100 mL beakers (21.35 ± 5.67 mg L^-1) than 10 mL well plates (42.44 ± 11.30 mg L^-1). Agitation of exposure media did not affect the toxicity of AgNPs. The results indicated that the experimental and environmental conditions influence on the toxicity of AgNPs in the nauplii of A. salina.

Acute effects of nanoplastics and microplastics on periphytic biofilms depending on particle size, concentration and surface modification

Microplastics (MPs) can disintegrate into smaller sized microplastics and even nanoplastics (NPs). The toxicity of nanoplastics and microplastics on freshwater organisms have been well explored recently, however, very little is known about the potential impacts of NPs on freshwater biofilms, which are essential for primary production and nutrient cycling in aquatic ecosystems. In this study, we studied the acute effects (3 h of exposure) of polystyrene beads (PS, with diameter range from 100 nm to 9 μm) on five biological endpoints targeting community and ecosystem-level processes in biofilms: chlorophyll a, photosynthetic yield, and three extracellular enzyme activities. The results showed that the large size PS beads (500 nm, 1 μm, and 9 μm) exhibited negligible effects on the determined biological endpoints in biofilms within the range of concentrations (5-100 mg/L) in this study. However, high concentration of PS beads (100 nm, 100 mg/L) significantly decreased the content of chlorophyll a, and the functional enzyme activities of β-glucosidase and leucine aminopeptidase, suggesting negative effects on the carbon and nitrogen cycling of freshwater biofilms. Moreover, the influences of PS NPs (100 nm) on biofilms strongly depended on the surface modification of PS particles, with the positively charged PS NPs (amide-modified) exhibiting the highest toxicity to biofilms. The excess generation of reactive oxygen species (ROS) in this study indicated oxidative stress induced by PS NPs, which might lead to the observed nano-toxic effects on biofilms. In response, the antioxidant activity of biofilm was enhanced as indicated by the increased total antioxidant capacity (T-AOC). Overall, our findings highlight nanoplastics have potential to disrupt the basic ecological functions of biofilms in aquatic environments.

Small-sized platinum nanoparticles in soil organic matter: Influence on water holding capacity, evaporation and structural rigidity

Engineered and anthropogenic nanoparticles represent a new type of pollutants. Up until now, many studies have reported its adverse effect on biota, but the potential influence on the properties and functions of environmental compartments has largely been ignored. In this work, the effect of Pt nanoparticles on the functions and properties of model soil organic matter has been studied. Using differential scanning calorimetry and molecular modeling, the effect of a wide range of 3 nm Pt nanoparticles concentrations on water holding capacity, the strength of water binding, the stability of water molecule bridges and the content of aliphatic crystallites was studied. It was found that strong hydration of the nanoparticles influences the 3D water structural network and acts as kosmotropic agents (structure-forming) in water bridges and as chaotropic agents (i.e. water destructuring) in larger water volumes. Contrarily, the interaction with soil organic matter moieties partially eliminates these effects. As a result, the 3 nm Pt nanoparticles decreased the evaporation enthalpy of water in soil organic matter and supported soil desiccation. They also increased the strength of water molecule bridges and increased the soil structural rigidity even at low concentrations. Additionally, at high concentrations, they decreased the water content in soil organic matter and induced the aliphatic moieties' crystallization. It is concluded that the small-sized Pt nanoparticles, and perhaps other types as well, may affect the local physicochemical processes in soils and may consequently contribute to enhanced evapotranspiration and deterioration of soil functions.

Composites with alginate beads: A novel design of nano-adsorbents impregnation for large-scale continuous flow wastewater treatment pilots

The sorption capacity of cadmium (Cd (II)) on three new generated nanocomposite beads sodium alginate (SA) based; SA-Clay (SA-C) beads, SA-Phosphate (SA-P) beads, and SA- Activated Charcoal (SA-Ch) beads was investigated in a batch scale, then a continuous flow reactor.

The highest adsorption capacity (137 mg/g) was obtained for SA-Ch using 1000 mg/L of initial Cd (II). The isotherm results showed that the adsorption equilibrium is compatible with the Langmuir isotherm and the sorption capacity of SA-Nano-adsorbent beads is very high. The models used for representing kinetic data was given that the removal of Cd (II) be well-fitted by second-order reaction kinetics. For the fixed bed column treatment, the maximum breakthrough times were 30, 38, and 48  h respectively for the SA-C, SA-P, and SA-Ch.

According to the obtained results, it was concluded that SA-Nano-adsorbent bead is an excellent designed material as a nanocomposite for cadmium elimination from wastewater in a continuous treatment process.

Revealing the Importance of Aging, Environment, Size and Stabilization Mechanisms on the Stability of Metal Nanoparticles: A Case Study for Silver Nanoparticles in a Minimally Defined and Complex Undefined Bacterial Growth Medium

Although the production and stabilization of metal nanoparticles (MNPs) is well understood, the behavior of these MNPs (possible aggregation or disaggregation) when they are intentionally or unintentionally exposed to different environments is a factor that continues to be underrated or overlooked. A case study is performed to analyze the stability of silver nanoparticles (AgNPs)-one of the most frequently used MNPs with excellent antibacterial properties-within two bacterial growth media: a minimally defined medium (IDL) and an undefined complex medium (LB). Moreover, the effect of aging, size and stabilization mechanisms is considered. Results clearly indicate a strong aggregation when AgNPs are dispersed in IDL. Regarding LB, the 100 nm electrosterically stabilized AgNPs remain stable while all others aggregate. Moreover, a serious aging effect is observed for the 10 nm electrostatically stabilized AgNPs when added to LB: after aggregation a restabilization effect occurs over time. Generally, this study demonstrates that the aging, medium composition (environment), size and stabilization mechanism-rarely acknowledged as important factors in nanotoxicity studies-have a profound impact on the AgNPs stabilization and should gain more attention in scientific research.

A sub-individual multilevel approach for an integrative assessment of CuO nanoparticle effects on Corbicula fluminea

Because they are widely used, copper oxide nanoparticles (CuO NPs) are likely to enter the aquatic environment and then reach the sediment. We have examined the effect of CuO NPs in the freshwater endobenthic bivalve Corbicula fluminea. Some previous studies have investigated effects at biochemical and physiological levels, but molecular endpoints are still poorly studied despite they are sensitive in early detection of NPs effect. In the present study, we have investigated short-term effects (96 h) of CuO NP (12, 30 nm; 0, 20 and 100 μg/L) using molecular endpoints as well as more conventional biochemical and physiological markers. The expression of antioxidant (CuZnSOD, MnSOD, Cat, Se-GPx, Trxr) and antitoxic (GST-Pi, HSP70, MT, Pgp, MRP1) related genes was measured at the mRNA level while antioxidant (SOD, TAC) and antitoxic (GST, ACP) defenses, energetic reserves and metabolism (ETS, Tri, LDH), and cellular damages (LPO) were assessed using a biochemical approach. The filtration rate measured at 96 h provided information at the physiological scale. Gene expression and filtration rate were responsive to CuO NPs but the effects differed according to the NP size. The results suggest that defense mechanisms may have been set up following 30 nm-NP exposure. The response to 12 nm-NP was lower but still showed that exposure to 12 nm-NP led to activation of cellular elimination mechanisms. The lowering of the filtration rate may have protected the organisms from the contamination. However, this raised the question of further repercussions on organism biology. Together, the results (i) indicate that CuO NP may exert effects at different levels even after a short-term exposure and (ii) point out the precocity of molecular response.

Engineered nanomaterials: From their properties and applications, to their toxicity towards marine bivalves in a changing environment

As a consequence of their unique characteristics, the use of Engineered Nanomaterials (ENMs) is rapidly increasing in industrial, agricultural products, as well as in environmental technology. However, this fast expansion and use make likely their release into the environment with particular concerns for the aquatic ecosystems, which tend to be the ultimate sink for this type of contaminants. Considering the settling behaviour of particulates, benthic organisms are more likely to be exposed to these compounds. In this way, the present review aims to summarise the most recent data available from the literature on ENMs behaviour and fate in aquatic ecosystems, focusing on their ecotoxicological impacts towards marine and estuarine bivalves. The selection of ENMs presented here was based on the OECD's Working Party on Manufactured Nanomaterials (WPMN), which involves the safety testing and risk assessment of ENMs. Physical-chemical characteristics and properties, applications, environmental relevant concentrations and behaviour in aquatic environment, as well as their toxic impacts towards marine bivalves are discussed. Moreover, it is also identified the impacts derived from the simultaneous exposure of marine organisms to ENMs and climate changes as an ecologically relevant scenario.

Aggregation of TiO2 and Ag nanoparticles in soil solution - Effects of primary nanoparticle size and dissolved organic matter characteristics

The colloidal stability of nanoparticles NP in soil solution is important to assess their potential effects on ecosystems. The aim of this work was to elucidate the interactions between initial particle size d_i, particle number concentration (N₀) as well as the characteristics of dissolved organic matter (DOM) for stabilizing Ag NP and TiO₂ NP. In batch experiments using time-resolved dynamic light scattering (DLS), we investigated the aggregation of TiO₂ NP (79 nm, 164 nm) and citrate-stabilised Ag NP (73 nm, 180 nm) in Ca²⁺ solution (2 mM) and two soil solutions, one extracted from a farmland and one from a floodplain soil (each containing 2 mM Ca²⁺). Our results demonstrate that the initial particle size and the particle number concentration affected aggregation more strongly in the presence of DOM than without DOM. The composition of DOM also affected aggregate size: NP formed larger aggregates in the presence of hydrophilic DOM than in the presence of hydrophobic DOM. Hydrophilic DOM showed a larger charge density than hydrophobic DOM. If Ca²⁺ is present, it may bridge DOM molecules, which may lead to greater NP destabilization. The results demonstrate that DOM interaction with NP may not only vary for different DOM characteristics (i.e. charge density) but may also be influenced by the presence of multivalent cations and different NP material; thus the effect of DOM on NP colloidal stability is not uniform.

Antimicrobial activity of silver salt and silver nanoparticles in different forms against microorganisms of different taxonomic groups

The development of antiseptics and medical products (bandaging materials, sponges, etc.) based on silver nanoparticles is an essential task due to the growing resistance of pathogenic microorganisms to medicines long used in clinical practice. Using silver nanoparticles for the same purpose is promising, but the potential hazards and cumulative effects in the application of nanoparticles requires a thorough study of those materials. To evaluate the efficiency of antiseptics and medical products based on silver nanoparticles, it is necessary to conduct an in-depth study of the activity of silver nanoparticles in different forms and immobilized in carriers. The study examines the resistance of bacterial and fungal cultures to silver nanoparticles produced by chemical reduction and microbiological synthesis. The study of resistance was carried out in different growth phases of pathogenic microorganisms and in both liquid and solid media. Chemically and microbiologically synthesized nanoparticles were added in the form of a suspension, as well as encapsulated in chitosan-PVA matrices. It was experimentally discovered that, depending on the medium and form of the silver, the antibacterial effect would significantly differ due to changes in the mechanisms regarding the release of nanoparticles and their activity against the cells of pathogenic and potentially pathogenic microorganisms.

Graphene oxide effects in early ontogenetic stages of Triticum aestivum L. seedlings

Nanomaterials are being used increasingly in various areas such as electronic devices manufacture, medicine, mechanical devices production, and even food industry. Therefore, the evaluation of their toxicity is mandatory. Graphene oxide (GO) has been shown to have both positive as well as negative impact on different crop plants, depending on species, dose, and duration of exposure. The current study evaluated the impact of GO sheets at different concentrations (500, 1000 and 2000 mg/L) on physiological, biochemical and genetic levels to determine the possible toxic action. Wheat caryopses were treated with GO for 48 h and 7 days. The germination rate and roots elongation decreased in a dose-response manner, except the sample treated with GO at a concentration of 1000 mg/L. Mitotic index has ascendant trend; its increase may be due to the accumulation of prophases GO induced significant accumulation of the cells with aberrations, their presence suggests a clastogenic/aneugenic effect of these carbon nanomaterials. Regarding enzymatic and non-enzymatic antioxidant system defence, the activity varied depending on the dose of GO. Thus, chlorophyll a pigments content decreased significantly at high dose (2000 mg/L), while the carotenoid pigments had lower content at 500 mg/L of GO, and no statistical difference encountered in case of chlorophyll b amount. The antioxidant enzyme activity (CAT, POD, and SOD) was higher at low dose of GO, indicating the presence of oxidative stress generated as a response to the GO treatment. Also, the free radical scavenging activity of the polyphenolic compounds was enhanced upon GO exposure. The GO accumulation has been identified by transmission electron microscopy only at plumules level, near the intercellular space.

Anaerobic digestion, mixing, environmental fate, and transport

This section covers research published during the calendar year 2018 on mixing and transport processes. The review covers mixing of anaerobic digesters, mixing of heat transfer, and environmental fate and transport.

Exploring the mechanisms of graphene oxide behavioral and morphological changes in zebrafish

The presence of natural organic matter such as humic acid (HA) can influence the behavior of graphene oxide (GO) in the aquatic environment. In this study, zebrafish embryos were analyzed after 5 and 7 days of exposure to GO (100 mg L^-1) and HA (20 mg L^-1) alone or together. The results indicated that, regardless of the presence of HA, larvae exposed to GO for 5 days showed an increase in locomotor activity, reduction in the yolk sac size, and total length and inhibition of AChE activity, but there was no difference in enzyme expression. The statistical analysis indicated that the reductions in total larval length, yolk sac size, and AChE activity in larvae exposed to GO persisted in relation to the control group, but there was a recovery of these parameters in groups also exposed to HA. Larvae exposed to GO for 7 days did not show significant differences in locomotor activity, but the RT-PCR gene expression analysis evidenced an increase in the AChE expression. Since the embryos exposed to GO showed a reduction in overall length, they were submitted to confocal microscopy and their muscle tissue configuration investigated. No changes were observed in the muscle tissue. The results indicated that HA is associated with the toxicity risk modulation by GO and that some compensatory homeostasis mechanisms may be involved in the developmental effects observed in zebrafish.

Detection, occurrence, and fate of emerging contaminants in agricultural environments (2019)

A review of 82 papers published in 2018 is presented. The topics ranged from detailed descriptions of analytical methods, to fate and occurrence studies, to ecological effects and sampling techniques for a wide variety of emerging contaminants likely to occur in agricultural environments. New methods and studies on veterinary pharmaceuticals, microplastics, and engineered nanomaterials in agricultural environments continue to expand our knowledge base on the occurrence and potential impacts of these compounds. This review is divided into the following sections: Introduction, Analytical Methods, Fate and Occurrence, Pharmaceutical Metabolites, Anthelmintics, Microplastics, and Engineered Nanomaterials. PRACTITIONER POINTS: New research describes innovative new techniques for emerging contaminant detection in agricultural settings. Newer classes of contaminants include human and veterinary pharmaceuticals. Research in microplastics and nanomaterials shows that these also occur in agricultural environments and will likely be topics of future work.

Interactions between nanoparticles in nanosuspension

Nanoparticles are particles with a characteristic dimension below 100 nm. The properties of nanoparticles differ substantially from those of "big" colloidal particles (size bigger than 1 μm) because radius of surface forces, which is around 100 nm, is greater than or comparable with the nanoparticles size. The latter means that each nanoparticle could be completely covered by the surface forces of the neighbouring particles at small enough separation. It also means that the well-known Derjaguin approximation cannot be applied directly and some modifications are required. Pairwise interaction between nanoparticles can be used only at an extremely low volume fraction of nanoparticles (below some critical volume fraction, which is ~0.02%), and above this concentration a new theory based on many-particle interactions should be applied, which is yet to be developed. Some recent progress in the area of interaction between nanoparticles is reviewed and the properties of nanosuspensions based on interaction between nanoparticles are described. The authors have not attempted to cover all available literature in the area but instead have tried to underline the fundamental problems in the area which need to be addressed.

Pyrethrum extract encapsulated in nanoparticles: Toxicity studies based on genotoxic and hematological effects in bullfrog tadpoles

The environment receives about 2.7 kg.ha^-1 annually of pesticides, used in crop production. Pesticides may have a negative impact on environmental biodiversity and potentially induce physiological effects on non-target species. Advances in technology and nanocarrier systems for agrochemicals led to new alternatives to minimize these impacts, such as nanopesticides, considered more efficient, safe and sustainable. However, it is important to evaluate the risk potential, action and toxicity of nanopesticides in aquatic and terrestrial organisms. This study aims to evaluate genotoxic and hematological biomarkers in bullfrog tadpoles (Lithobates catesbeianus) submitted to acute exposure (48 h) to pyrethrum extract (PYR) and solid lipid nanoparticles loaded with PYR. Results showed increased number of leukocytes during acute exposure, specifically eosinophils in nanoparticle-exposed groups, and basophil in PYR-exposed group. Hematological analysis showed that PYR encapsulated in nanoparticles significantly increased the erythrocyte number compared to the other exposed groups. Data from the comet assay indicated an increase in frequency of the classes that correspond to more severe DNA damages in exposed groups, being that the PYR-exposed group showed a high frequency of class-4 DNA damage. Moreover, erythrocyte nuclear abnormalities were triggered by short-time exposure in all treatments, which showed effects significantly higher than the control group. These results showed genotoxic responses in tadpoles, which could trigger cell death pathways. Concluding, these analyses are important for applications in assessment of contaminated aquatic environments and their biomonitoring, which will evaluate the potential toxicity of xenobiotics, for example, the nanoparticles and pyrethrum extract in frog species. However, further studies are needed to better understand the effects of nanopesticides and botanical insecticides on non-target organisms, in order to contribute to regulatory aspects of future uses for these systems.

Anaerobic digestion

Worldwide waste generation has become a topic of interest since the accumulation of this waste has prompted environmental hazards. Among which, anaerobic digestion provides green and efficient alternate solution for removal of toxic waste and energy production. Therefore, this review emphasizes on the recent data published in 2018 on topics related to anaerobic process, enhancement of biogas production, and fermentation efficiency. Furthermore, more focus was made on the factors influencing anaerobic digestion and the effect of trace elements as ionic salts as well as nanoparticles on overall biogas production, respectively. PRACTITIONER POINTS: Anaerobic digestion provide green and efficient alternate solution to deal with. This review focused on the conditions related to anaerobic process to improve biogas production and fermentation efficiency. The trace elements were focused on how to influence biogas production during anaerobic digestion.

The Influence of Available Cu and Au Nanoparticles (NPs) on the Survival of Water Fleas (Daphnia pulex)

Applications of nanotechnologies in different sectors and everyday items are very promising and their popularity continues to grow. The number of products containing nanoparticles makes environmental exposure to nanoparticles inevitable. The current understanding of the relationships between nanoparticles and the environment is inadequate despite the fast growth of nanotechnologies. The aim of the study was to investigate the influence of copper and gold nanoparticles on Daphnia pulex survival. Our study included 48-h acute toxicity tests and determination of median lethal concentration values (LC₅₀s) for Cu-NPs and Au-NPs. For nano-copper, 24 h LC₅₀ was assumed > 1 mg/L, and 48 h LC₅₀ = 0.5117 mg/L. For nano-gold the LC₅₀ value after 24 h was 0.4027 mg/L, and after 48 h 0.1007 mg/L. The toxicity of nano -gold solutions was thus found to be higher than that of nano-copper. The addition of Cu-NPs at 0.0625 mg/L and 0.125 mg/L caused an increased multiplication of daphnia, while Au-NPs at 1 mg/L was an inhibitor of reproduction.

Sunscreens as a New Source of Metals and Nutrients to Coastal Waters

Studies detailing the environmental impact of sunscreen products on coastal ecosystems are considered a high priority. In the present study, we have determined the release rate of dissolved trace metals (Al, Cd, Cu, Co, Mn, Mo, Ni, Pb, and Ti) and inorganic nutrients (SiO₂, P-PO₄^3-, and N-NO₃^-) from a commercial sunscreen in seawater, and the role of UV radiation in the mobilization of these compounds. Our results indicate that release rates are higher under UV light conditions for all compounds and trace metals except Pb. We have developed a kinetic model to establish the release pattern and the contribution to marine coastal waters of dissolved trace metals and inorganic nutrients from sunscreen products. We conservatively estimate that sunscreen from bathers is responsible for an increase of dissolved metals and nutrients ranging from 7.54 × 10^-4 % for Ni up to 19.8% for Ti. Our results demonstrate that sunscreen products are a significant source of metals and inorganic nutrients to coastal waters. The normally low environmental concentrations of some elements (e.g., P) and the toxicity of others (e.g., Pb) could be having a serious adverse effect on marine ecology in the Mediterranean Sea. This risk must not be ignored.

Soybean Interaction with Engineered Nanomaterials: A Literature Review of Recent Data

With a continuous increase in the production and use in everyday life applications of engineered nanomaterials, concerns have appeared in the past decades related to their possible environmental toxicity and impact on edible plants (and therefore, upon human health). Soybean is one of the most commercially-important crop plants, and a perfect model for nanomaterials accumulation studies, due to its high biomass production and ease of cultivation. In this review, we aim to summarize the most recent research data concerning the impact of engineered nanomaterials on the soya bean, covering both inorganic (metal and metal-oxide nanoparticles) and organic (carbon-based) nanomaterials. The interactions between soybean plants and engineered nanomaterials are discussed in terms of positive and negative impacts on growth and production, metabolism and influences on the root-associated microbiota. Current data clearly suggests that under specific conditions, nanomaterials can negatively influence the development and metabolism of soybean plants. Moreover, in some cases, a possible risk of trophic transfer and transgenerational impact of engineered nanomaterials are suggested. Therefore, comprehensive risk-assessment studies should be carried out prior to any mass productions of potentially hazardous materials.

The zebrafish embryotoxicity test (ZET) for nanotoxicity assessment: from morphological to molecular approach

Nanotechnology and use of nanomaterials (NMs) improve life quality, economic growth and environmental health. However, the increasing production and use of NMs in commercial products has led to concerns about their potential toxicity on human and environment health, as well as its toxicological classification and regulation. In this context, there is an urgent need to standardize and validate procedures for nanotoxicity testing. Since the zebrafish embryotoxicity test (ZET) has been indicated as a suitable approach for the toxicity assessment of traditional and emergent pollutants, the aim of this review is to summarize the existing literature on embryotoxic and teratogenic effects of NMs on zebrafish. In addition, morphological changes in zebrafish embryos induced by NMs were classified in four reaction models, allowing classification of the mode of action and toxicity of different types of NM. Revised data showed that the interaction and bioaccumulation of NMs on zebrafish embryos were associated to several toxic effects, while the detoxification process was limited. In general, NMs induced delayed hatching, circulatory changes, pigmentation and tegumentary alterations, musculoskeletal disorders and yolk sac alterations on zebrafish embryos. Recommendations for nanotoxicological tests are given, including guidance for future research. This review reinforces the use of the ZET as a suitable approach to assess the health risks of NM exposure.