The fibronectin type III domain as a scaffold for novel binding proteins

Conformational dynamics in loop swap mutants of homologous fibronectin type III domains

Fibronectin type III (FN-III) domains are autonomously folded modules found in a variety of multidomain proteins. The 10th FN-III domain from fibronectin (fnFN10) and the 3rd FN-III domain from tenascin-C (tnFN3) have 27% sequence identity and the same overall fold; however, the CC' loop has a different pattern of backbone hydrogen bonds and the FG loop is longer in fnFN10 compared to tnFN3. To examine the influence of length, sequence, and context in determining dynamical properties of loops, CC' and FG loops were swapped between fnFN10 and tnFN3 to generate four mutant proteins and backbone conformational dynamics on ps-ns and mus-ms timescales were characterized by solution (15)N-NMR spin relaxation spectroscopy. The grafted loops do not strongly perturb the properties of the protein scaffold; however, specific effects of the mutations are observed for amino acids that are proximal in space to the sites of mutation. The amino acid sequence primarily dictates conformational dynamics when the wild-type and grafted loop have the same length, but both sequence and context contribute to conformational dynamics when the loop lengths differ. The results suggest that changes in conformational dynamics of mutant proteins must be considered in both theoretical studies and protein design efforts.

Evolution of an Interloop Disulfide Bond in High-Affinity Antibody Mimics Based on Fibronectin Type III Domain and Selected by Yeast Surface Display: Molecular Convergence with Single-Domain Camelid and Shark Antibodies

The 10th human fibronectin type III domain ((10)Fn3) is one of several protein scaffolds used to design and select families of proteins that bind with high affinity and specificity to macromolecular targets. To date, the highest affinity (10)Fn3 variants have been selected by mRNA display of libraries generated by randomizing all three complementarity-determining region -like loops of the (10)Fn3 scaffold. The sub-nanomolar affinities of such antibody mimics have been attributed to the extremely large size of the library accessible by mRNA display (10(12) unique sequences). Here we describe the selection and affinity maturation of (10)Fn3-based antibody mimics with dissociation constants as low as 350 pM selected from significantly smaller libraries (10(7)-10(9) different sequences), which were constructed by randomizing only 14 (10)Fn3 residues. The finding that two adjacent loops in human (10)Fn3 provide a large enough variable surface area to select high-affinity antibody mimics is significant because a smaller deviation from wild-type (10)Fn3 sequence is associated with a higher stability of selected antibody mimics. Our results also demonstrate the utility of an affinity-maturation strategy that led to a 340-fold improvement in affinity by maximizing sampling of sequence space close to the original selected antibody mimic. A striking feature of the highest affinity antibody mimics selected against lysozyme is a pair of cysteines on adjacent loops, in positions 28 and 77, which are critical for the affinity of the (10)Fn3 variant for its target and are close enough to form a disulfide bond. The selection of this cysteine pair is structurally analogous to the natural evolution of disulfide bonds found in new antigen receptors of cartilaginous fish and in camelid heavy-chain variable domains. We propose that future library designs incorporating such an interloop disulfide will further facilitate the selection of high-affinity, highly stable antibody mimics from libraries accessible to phage and yeast surface display methods.

Phage display selection of Affibody molecules with specific binding to the extracellular domain of the epidermal growth factor receptor

Affibody molecules specific for the epidermal growth factor receptor (EGFR) have been selected by phage display technology from a combinatorial protein library based on the 58-residue, protein A-derived Z domain. EGFR is overexpressed in various malignancies and is frequently associated with poor patient prognosis, and the information provided by targeting this receptor could facilitate both patient diagnostics and treatment. Three selected Affibody variants were shown to selectively bind to the extracellular domain of EGFR (EGFR-ECD). Kinetic biosensor analysis revealed that the three monomeric Affibody molecules bound with similar affinity, ranging from 130 to 185 nM. Head-to-tail dimers of the Affibody molecules were compared for their binding to recombinant EGFR-ECD in biosensor analysis and in human epithelial cancer A431 cells. Although the dimeric Affibody variants were found to bind in a range of 25-50 nM affinities in biosensor analysis, they were found to be low nanomolar binders in the cellular assays. Competition assays using radiolabeled Affibody dimers confirmed specific EGFR-binding and demonstrated that the three Affibody molecules competed for the same epitope. Immunofluorescence microscopy demonstrated that the selected Affibody dimers were initially binding to EGFR at the cell surface of A431, and confocal microscopy analysis showed that the Affibody dimers could thereafter be internalized. The potential use of the described Affibody molecules as targeting agents for radionuclide based imaging applications in various carcinomas is discussed.

Engineered proteins as specific binding reagents

Over the past 30 years, monoclonal antibodies have become the standard binding proteins and currently find applications in research, diagnostics and therapy. Yet, monoclonal antibodies now face strong competition from synthetic antibody libraries in combination with powerful library selection technologies. More recently, an increased understanding of other natural binding proteins together with advances in protein engineering, selection and evolution technologies has also triggered the exploration of numerous other protein architectures for the generation of designed binding molecules. Valuable protein-binding scaffolds have been obtained and represent promising alternatives to antibodies for biotechnological and, potentially, clinical applications.

High-affinity single-domain binding proteins with a binary-code interface

High degrees of sequence and conformation complexity found in natural protein interaction interfaces are generally considered essential for achieving tight and specific interactions. However, it has been demonstrated that specific antibodies can be built by using an interface with a binary code consisting of only Tyr and Ser. This surprising result might be attributed to yet undefined properties of the antibody scaffold that uniquely enhance its capacity for target binding. In this work we tested the generality of the binary-code interface by engineering binding proteins based on a single-domain scaffold. We show that Tyr/Ser binary-code interfaces consisting of only 15-20 positions within a fibronectin type III domain (FN3; 95 residues) are capable of producing specific binding proteins (termed "monobodies") with a low-nanomolar K(d). A 2.35-A x-ray crystal structure of a monobody in complex with its target, maltose-binding protein, and mutation analysis revealed dominant contributions of Tyr residues to binding as well as striking molecular mimicry of a maltose-binding protein substrate, beta-cyclodextrin, by the Tyr/Ser binary interface. This work suggests that an interaction interface with low chemical diversity but with significant conformational diversity is generally sufficient for tight and specific molecular recognition, providing fundamental insights into factors governing protein-protein interactions.

Design, expression, and stability of a diverse protein library based on the human fibronectin type III domain

Protein libraries based on natural scaffolds enable the generation of novel molecular tools and potential therapeutics by directed evolution. Here, we report the design and construction of a high complexity library (30 x 10(13) sequences) based on the 10th fibronectin type III domain of human fibronectin (10FnIII). We examined the bacterial expression characteristics and stability of this library using a green fluorescent protein (GFP)-reporter screen, SDS-PAGE analysis, and chemical denaturation, respectively. The high throughput GFP reporter screen demonstrates that a large fraction of our library expresses significant levels of soluble protein in bacteria. However, SDS-PAGE analysis of expression cultures indicates the ratio of soluble to insoluble protein expressed varies greatly for randomly chosen library members. We also tested the stabilities of several representative variants by guanidinium chloride denaturation. All variants tested displayed cooperative unfolding transitions similar to wild-type, and two exhibited free energies of unfolding equal to wild-type 10FnIII. This work demonstrates the utility of GFP-based screening as a tool for analysis of high-complexity protein libraries. Our results indicate that a vast amount of protein sequence space surrounding the 10FnIII scaffold is accessible for the generation of novel functions by directed as well as natural evolution.

Identification of regions within the F domain of the human estrogen receptor alpha that are important for modulating transactivation and protein-protein interactions

The estrogen receptor (ER)alpha is a biologically and clinically important ligand-modulated transcription factor. The F domain of the ERalpha modulates its functions in a ligand-, promoter-, and cell-specific manner. To identify the region(s) responsible for these functions, we characterized the effects of serial truncations within the F domain. We found that truncating the last 16 residues of the F domain altered the activity of the human ERalpha (hERalpha) on an estrogen response element-driven promoter in response to estradiol or 4-hydroxytamoxifen (4-OHT), its sensitivity to overexpression of the coactivator steroid receptor coactivator-1 in mammalian cells, and its interaction with a receptor-interacting domain of the coactivator steroid receptor coactivator-1 or engineered proteins ("monobodies") that specifically bind to ERalpha/ligand complexes in a yeast two-hybrid system. Most importantly, the ability of the ER to induce pS2 was reduced in MDA-MB-231 cells stably expressing this truncated ER vs. the wild-type ER. The region includes a distinctive segment (residues 579-584; LQKYYIT) having a high content of bulky and/or hydrophobic amino acids that was previously predicted to adopt a beta-strand-like structure. As previously reported, removal of the entire F domain was necessary to eliminate the agonist activity of 4-OHT. In addition, mutation of the vicinal glycine residues between the ligand-binding domain and F domains specifically reduced the 4-OHT-dependent interactions of the hERalpha ligand-binding domain and F domains with monobodies. These results show that regions within the F domain of the hERalpha selectively modulate its activity and its interactions with other proteins.

Eliminating helper phage from phage display

Phage display technology involves the display of proteins or peptides, as coat protein fusions, on the surface of a phage or phagemid particles. Using standard technology, helper phage are essential for the replication and assembly of phagemid particles, during library production and biopanning. We have eliminated the need to add helper phage by using 'bacterial packaging cell lines' that provide the same functions. These cell lines contain M13-based helper plasmids that express phage packaging proteins which assemble phagemid particles as efficiently as helper phage, but without helper phage contamination. This results in genetically pure phagemid particle preparations. Furthermore, by using constructs differing in the form of gene 3 that they contain, we have shown that the display, from a single library, can be modulated between monovalent (phagemid-like) and multivalent display (phage-like) without any further engineering. These packaging cells eliminate the use of helper phage from phagemid-based selection protocols; reducing the amount of technical preparation, facilitating automation, optimizing selections by matching display levels to diversity, and effectively using the packaged phagemid particles as means to transfer genetic information at an efficiency approaching 100%.

Antagonists to human and mouse vascular endothelial growth factor receptor 2 generated by directed protein evolution in vitro

Using directed in vitro protein evolution, we generated proteins that bound and antagonized the function of vascular endothelial growth factor receptor 2 (VEGFR2). Binders to human VEGFR2 (KDR) with 10-200 nM affinities were selected by using mRNA display from a library (10(13) variants) based on the tenth human fibronectin type III domain (10Fn3) scaffold. Subsequently, a single KDR binding clone (K(d) = 11 nM) was subjected to affinity maturation. This yielded improved KDR binding molecules with affinities ranging from 0.06 to 2 nM. Molecules with dual binding specificities (human/mouse) were also isolated by using both KDR and Flk-1 (mouse VEGFR2) as targets in selection. Proteins encoded by the selected clones bound VEGFR2-expressing cells and inhibited their VEGF-dependent proliferation. Our results demonstrate the potential of these inhibitors in the development of anti-angiogenesis therapeutics.

Conformation-specific affinity purification of proteins using engineered binding proteins: Application to the estrogen receptor

Affinity chromatography coupled with an "affinity tag" has become a powerful and routine technology for the purification of recombinant proteins. However, such tag-based affinity chromatography usually cannot separate different conformational states (e.g., folded and misfolded) of a protein to be purified. Here, we describe a strategy to separate different conformations of a protein by using "tailor-made" affinity chromatography based on engineered binding proteins. Our method involves: (i) engineering of a binding protein specific to a particular conformation of the protein of interest, and (ii) production and immobilization of the binding protein to prepare conformation-specific affinity chromatography media. Using "monobodies," small antibody mimics based on the fibronectin type III domain, as the target-binding proteins, we demonstrated the effectiveness of our method by separating the active form of the estrogen receptor alpha ligand-binding domain (ERalpha-LBD) from a mixture of active and misfolded species and by discriminating two different conformations of ERalpha-LBD bound to different ligands. Our strategy should be generally applicable to the preparation of conformationally homogeneous protein samples.

Nanobodies as novel agents for cancer therapy

Nanobodies are the smallest fragments of naturally occurring heavy-chain antibodies that have evolved to be fully functional in the absence of a light chain. As such, the cloning and selection of antigen-specific nanobodies obviate the need for construction and screening of large libraries, and for lengthy and unpredictable in vitro affinity maturation steps. The unique and well-characterised properties enable nanobodies to excel conventional therapeutic antibodies in terms of recognising uncommon or hidden epitopes, binding into cavities or active sites of protein targets, tailoring of half-life, drug format flexibility, low immunogenic potential and ease of manufacture. Moreover, the favourable biophysical and pharmacological properties of nanobodies, together with the ease of formatting them into multifunctional protein therapeutics, leaves them ideally placed as a new generation of antibody-based therapeutics. This review describes the state of the art on nanobodies and illustrates their potential as cancer therapeutic agents.

Structures of in Vitro Evolved Binding Sites on Neocarzinostatin Scaffold Reveal Unanticipated Evolutionary Pathways

We have recently applied in vitro evolution methods to create in Neocarzinostatin a new binding site for a target molecule unrelated to its natural ligand. The main objective of this work was to solve the structure of some of the selected binders in complex with the target molecule: testosterone. Three proteins (1a.15, 3.24 and 4.1) were chosen as representative members of sequence families that came out of the selection process within different randomization schemes. In order to evaluate ligand-induced conformational adaptation, we also determined the structure of one of the proteins (3.24) in the free and complexed forms. Surprisingly, all these mutants bind not one but two molecules of testosterone in two very different ways. The 3.24 structure revealed that the protein spontaneously evolved in the system to bind two ligand molecules in one single binding crevice. These two binding sites are formed by substituted as well as by non-variable side-chains. The comparison with the free structure shows that only limited structural changes are observed upon ligand binding. The X-ray structures of the complex formed by 1a.15 and 4.1 Neocarzinostatin mutants revealed that the two variants form very similar dimers. These dimers were observed neither for the uncomplexed variants nor for wild-type Neocarzinostatin but were shown here to be induced by ligand binding. Comparison of the three complexed forms clearly suggests that these unanticipated structural responses resulted from the molecular arrangement used for the selection experiments.

A new generation of protein display scaffolds for molecular recognition

Engineered antibodies and their fragments are invaluable tools for a vast range of biotechnological and pharmaceutical applications. However, they are facing increasing competition from a new generation of protein display scaffolds, specifically selected for binding virtually any target. Some of them have already entered clinical trials. Most of these nonimmunoglobulin proteins are involved in natural binding events and have amazingly diverse origins, frameworks, and functions, including even intrinsic enzyme activity. In many respects, they are superior over antibody-derived affinity molecules and offer an ever-extending arsenal of tools for, e.g., affinity purification, protein microarray technology, bioimaging, enzyme inhibition, and potential drug delivery. As excellent supporting frameworks for the presentation of polypeptide libraries, they can be subjected to powerful in vitro or in vivo selection and evolution strategies, enabling the isolation of high-affinity binding reagents. This article reviews the generation of these novel binding reagents, describing validated and advanced alternative scaffolds as well as the most recent nonimmunoglobulin libraries. Characteristics of these protein scaffolds in terms of structural stability, tolerance to multiple substitutions, ease of expression, and subsequent applications as specific targeting molecules are discussed. Furthermore, this review shows the close linkage between these novel protein tools and the constantly developing display, selection, and evolution strategies using phage display, ribosome display, mRNA display, cell surface display, or IVC (in vitro compartmentalization). Here, we predict the important role of these novel binding reagents as a toolkit for biotechnological and biomedical applications.

Engineering of the Escherichia coli Im7 immunity protein as a loop display scaffold

Protein scaffolds derived from non-immunoglobulin sources are increasingly being adapted and engineered to provide unique binding molecules with a diverse range of targeting specificities. The ColE7 immunity protein (Im7) from Escherichia coli is potentially one such molecule, as it combines the advantages of (i) small size, (ii) stability conferred by a conserved four anti-parallel alpha-helical framework and (iii) availability of variable surface loops evolved to inactivate members of the DNase family of bacterial toxins, forming one of the tightest known protein-protein interactions. Here we describe initial cloning and protein expression of Im7 and its cognate partner the 15 kDa DNase domain of the colicin E7. Both proteins were produced efficiently in E.coli, and their in vitro binding interactions were validated using ELISA and biosensor. In order to assess the capacity of the Im7 protein to accommodate extensive loop region modifications, we performed extensive molecular modelling and constructed a series of loop graft variants, based on transfer of the extended CDR3 loop from the IgG1b12 antibody, which targets the gp120 antigen from HIV-1. Loop grafting in various configurations resulted in chimeric proteins exhibiting retention of the underlying framework conformation, as measured using far-UV circular dichroism spectroscopy. Importantly, there was low but measurable transfer of antigen-specific affinity. Finally, to validate Im7 as a selectable scaffold for the generation of molecular libraries, we displayed Im7 as a gene 3 fusion protein on the surface of fd bacteriophages, the most common library display format. The fusion was successfully detected using an anti-Im7 rabbit polyclonal antibody, and the recombinant phage specifically recognized the immobilized DNase. Thus, Im7 scaffold is an ideal protein display scaffold for the future generation and for the selection of libraries of novel binding proteins.

Artificial, non-antibody binding proteins for pharmaceutical and industrial applications

Using combinatorial chemistry to generate novel binding molecules based on protein frameworks ('scaffolds') is a concept that has been strongly promoted during the past five years in both academia and industry. Non-antibody recognition proteins derive from different structural families and mimic the binding principle of immunoglobulins to varying degrees. In addition to the specific binding of a pre-defined target, these proteins provide favourable characteristics such as robustness, ease of modification and cost-efficient production. The broad spectrum of potential applications, including research tools, separomics, diagnostics and therapy, has led to the commercial exploitation of this technology by various small- and medium-sized companies. It is predicted that scaffold-based affinity reagents will broaden and complement applications that are presently covered by natural or recombinant antibodies. Here, we provide an overview on current approaches in the biotech industry, considering both scientific and commercial aspects.

Evolution of a carbohydrate binding module into a protein-specific binder

A carbohydrate binding module, CBM4-2, derived from the xylanase (Xyn 10A) of Rhodothermus marinus has been used as a scaffold for molecular diversification. Its binding specificity has been evolved to recognise a quite different target, a human monoclonal IgG4. In order to understand the basis for this drastic change in specificity we have further investigated the target recognition of the IgG4-specific CBMs. Firstly, we defined that the structure target recognised by the selected CBM-variants was the protein and not the carbohydrates attached to the glycoprotein. We also identified key residues involved in the new specificity and/or responsible for the swap in specificity, from xylan to human IgG4. Specific changes present in all these CBMs included mutations not introduced in the design of the library from which the specific clones were selected. Reversion of such mutations led to a complete loss of binding to the target molecule, suggesting that they are critical for the recognition of human IgG4. Together with the mutations introduced at will, they had transformed the CBM scaffold into a protein binder. We have thus shown that the scaffold of CBM4-2 is able to harbour molecular recognition for either carbohydrate or protein structures.

Protein-detecting microarrays: current accomplishments and requirements

The sequencing of the human genome has been successfully completed and offers the chance of obtaining a large amount of valuable information for understanding complex cellular events simply and rapidly in a single experiment. Interestingly, in addressing these proteomic studies, the importance of protein-detecting microarray technology is increasing. In the coming few years, microarray technology will become a significantly promising and indispensable research/diagnostic tool from just a speculative technology. It is clear that the protein-detecting microarray is supported by three independent but strongly related technologies (surface chemistry, detection methods, and capture agents). Firstly, a variety of surface-modification methodologies are now widely available and offer site-specific immobilization of capture agents onto surfaces in such a way as to keep the native conformation and activity. Secondly, sensitive and parallel detection apparatuses are being developed to provide highly engineered microarray platforms for simultaneous data acquisition. Lastly, in the development of capture agents, antibodies are now probably the most prominent capture agents for analyzing protein abundances. Alternative scaffolds, such as phage-displayed antibody and protein fragments, which provide the advantage of increasing diversity of proteinic capture agents, however, are under development. An approach involving recombinant proteins fused with affinity tag(s) and coupled with a highly engineered surface chemistry will provide simple production protocols and specific orientations of capture agents on the microarray formats. Peptides and other small molecules can be employed in screening highly potent ligands as well as in measuring enzymatic activities. Protein-detecting microarrays supported by the three key technologies should contribute in accelerating diagnostic/biological research and drug discovery.

Elements in the C terminus of apolipoprotein [a] responsible for the binding to the tenth type III module of human fibronectin

In previous studies, we showed that the C-terminal domain, F2, but not the N-terminal domain, F1, is responsible for the binding of apolipoprotein [a] (apo[a]) to human fibronectin (Fn). To pursue those observations, we prepared, by both elastase digestion and recombinant technology, subsets of F2 of a different length containing either kringle (K) V or the protease domain (PD). We also studied rhesus monkey apo[a], which is known to contain PD but not KV. In the case of Fn, we used both an intact product and its tenth type III module (10FN-III) expressed in Escherichia coli. The binding studies carried out on microtiter plates showed that the affinity of F2 for immobilized 10FN-III was approximately 6-fold higher than that for Fn (dissociation constants = 1.75 +/- 0.31 nM and 10.25 +/- 1.62 nM, respectively). The binding was also exhibited by rhesus apo[a] and by an F2 subset containing the PD linked to an upstream microdomain comprising KIV-8 to KIV-10 and KV, inactive by itself. Competition experiments on microtiter plates showed that both Fn and 10FN-III, when in solution, are incompetent to bind F2. Together, our results indicate that F2 binds to immobilized 10FN-III more efficiently than whole Fn and that the binding can be sustained by truncated forms of F2 that contain the catalytically inactive PD linked to an upstream four K microdomain.

Engineering novel binding proteins from nonimmunoglobulin domains

Not all adaptive immune systems use the immunoglobulin fold as the basis for specific recognition molecules: sea lampreys, for example, have evolved an adaptive immune system that is based on leucine-rich repeat proteins. Additionally, many other proteins, not necessarily involved in adaptive immunity, mediate specific high-affinity interactions. Such alternatives to immunoglobulins represent attractive starting points for the design of novel binding molecules for research and clinical applications. Indeed, through progress and increased experience in library design and selection technologies, gained not least from working with synthetic antibody libraries, researchers have now exploited many of these novel scaffolds as tailor-made affinity reagents. Significant progress has been made not only in the basic science of generating specific binding molecules, but also in applications of the selected binders in laboratory procedures, proteomics, diagnostics and therapy. Challenges ahead include identifying applications where these novel proteins can not only be an alternative, but can enable approaches so far deemed technically impossible, and delineate those therapeutic applications commensurate with the molecular properties of the respective proteins.

High-affinity fragment complementation of a fibronectin type III domain and its application to stability enhancement

The tenth fibronectin type III (FN3) domain of human fibronectin (FNfn10), a prototype of the ubiquitous FN3 domain, is a small, monomeric beta-sandwich protein. In this study, we have bisected FNfn10 in each loop to generate a total of six fragment pairs. We found that fragment pairs bisected at multiple loops of FNfn10 show complementation in vivo as tested with a yeast two-hybrid system. The dissociation constant of these fragment pairs determined in vitro were as low as 3 nM, resulting in one of the tightest fragment complementation systems reported so far. Furthermore, we show that the affinity of fragment complementation is correlated with the stability of the uncut parent protein. Exploring this correlation, we screened a yeast two-hybrid library of one fragment and identified mutations that suppress the effect of a destabilizing mutation in the other fragment. One of the identified mutations significantly increased the stability of the uncut wild-type protein, proving that fragment complementation can be used as a novel strategy for the selection of proteins with enhanced stability.

Recombinant adenovirus type 5 vectors that target DC-SIGN, ChemR23 and alpha(v)beta3 integrin efficiently transduce human dendritic cells and enhance presentation of vectored antigens

Recombinant adenoviruses (rAds) represent a promising system for vaccine delivery but transduce dendritic cells (DC) relatively poorly. To address this concern, we used a biotin-avidin linkage to conjugate rAd vectors to ligands which bind with high affinity to selected receptors on DC (ChemR23, alpha(v)beta3 integrin, and DC-SIGN). The targeted vectors had an enhanced ability to transduce human monocyte-derived DC compared to untargeted virus. In addition, DC transduced with targeted rAd vectors were more efficient at stimulating cytokine production by autologous memory CD8+ T cells, against a vector-encoded antigen. These results expand the range of cell surface receptors that can be used to target rAd5 vectors to DC, and may facilitate future development of rAd-based vaccines.

Antibody mimics based on human fibronectin type three domain engineered for thermostability and high-affinity binding to vascular endothelial growth factor receptor two

The tenth human fibronectin type three domain ((10)Fn3) is a small (10 kDa), extremely stable and soluble protein with an immunoglobulin-like fold, but without cysteine residues. Selections from (10)Fn3-based libraries of proteins with randomized loops have yielded high-affinity, target-specific antibody mimics. However, little is known about the biophysical properties of such antibody mimics, which will determine their suitability for in vitro and medical applications. We characterized target binding and biophysical properties of two related (10)Fn3-based antibody mimics that bind vascular endothelial growth factor receptor two (VEGF-R2). The first antibody mimic, which has a dissociation constant (K(d)) of 13 nM, is highly stable [melting temperature (T(m))=62 degrees C] and soluble, whereas the second, which binds VEGF-R2 with 40 x higher affinity, is less stable (T(m) < 40 degrees C) and relatively insoluble. We used our understanding of these two (10)Fn3 derivatives and of wild-type (10)Fn3 structure to engineer the next generation of antibody mimics, which have an improved combination of high affinity (K(d)=0.59 nM), stability (T(m)=53 degrees C) and solubility. Our findings illustrate that (10)Fn3-based antibody mimics can be engineered for favorable biophysical properties even when 20% of the wild-type (10)Fn3 sequence is mutated in order to satisfy target-binding requirements.

Intracellular Kinase Inhibitors Selected from Combinatorial Libraries of Designed Ankyrin Repeat Proteins

The specific intracellular inhibition of protein activity at the protein level allows the determination of protein function in the cellular context. We demonstrate here the use of designed ankyrin repeat proteins as tailor-made intracellular kinase inhibitors. The target was aminoglycoside phosphotransferase (3')-IIIa (APH), which mediates resistance to aminoglycoside antibiotics in pathogenic bacteria and shares structural homology with eukaryotic protein kinases. Combining a selection and screening approach, we isolated 198 potential APH inhibitors from highly diverse combinatorial libraries of designed ankyrin repeat proteins. A detailed analysis of several inhibitors revealed that they bind APH with high specificity and with affinities down to the subnanomolar range. In vitro, the most potent inhibitors showed complete enzyme inhibition, and in vivo, a phenotype comparable with the gene knockout was observed, fully restoring antibiotic sensitivity in resistant bacteria. These results underline the great potential of designed ankyrin repeat proteins for modulation of intracellular protein function.

New Binding Specificities Derived from Min-23, a Small Cystine-Stabilized Peptidic Scaffold†

The randomization of both internal and surface residues in small protein domains followed by selection from a display library is emerging as a powerful strategy to obtain novel binding specificities. Small and stable scaffold motifs observed in disulfide-rich proteins are attractive because they are small, stable, and accessible to chemical synthesis. The elementary structural motif found in the squash trypsin inhibitor EETI-II (Ecballium elaterium trypsin inhibitor) is the cystine stabilized beta-sheet (CSB) motif, found in nearly 50% of all known small disulfide-rich protein families. We have used Min-23, a short 23-residue peptide containing the CSB motif and shown to be a stable autonomous folding unit and one of the smallest scaffolds described to date, as a scaffold for selection of new binding ligands. We demonstrate that the core CSB motif in Min-23 is permissive to loop insertion, using peptide epitopes from hemagglutinin (HA) and Gla-protein (E). A phage library of more than 10(8) different clones has been constructed by insertion of a randomized sequence on a beta-turn of the Min-23 peptide. The selection of this library on a variety of 7 different targets allowed the isolation of 21 new specific binders, confirming the potential of Min-23 as a scaffold for the development of new ligands. The derived library is able to provide a wide range of novel compounds with possible applications in various biological and pharmaceutical areas.

Enhanced detection sensitivity using a novel solid-phase incorporated affinity fluorescent protein biosensor

We engineered green fluorescent protein (GFP) into affinity fluorescent proteins (aFPs) biosensors. The aFPs detect protein-protein interactions by enhanced fluorescence intensity. In a proof of principle demonstration, aFPs containing haemagglutinin (HA) tag bind specifically to the anti-HA antibody. The sensitivity and specificity is enhanced 28-fold by incorporation of aFPs into solid-phase surface.

Protein sequence randomization: efficient estimation of protein stability using knowledge-based potentials

Modifications of the amino acid sequence generally affect protein stability. Here, we use knowledge-based potentials to estimate the stability of protein structures under sequence variation. Calculations on a variety of protein scaffolds result in a clear distinction of known mutable regions from arbitrarily chosen control patches. For example, randomly changing the sequence of an antibody paratope yields a significantly lower number of destabilized mutants as compared to the randomization of comparable regions on the protein surface. The technique is computationally efficient and can be used to screen protein structures for regions that are amenable to molecular tinkering by preserving the stability of the mutated proteins.

In-vitro protein evolution by ribosome display and mRNA display

In-vitro display technologies combine two important advantages for identifying and optimizing ligands by evolutionary strategies. First, by obviating the need to transform cells in order to generate and select libraries, they allow a much higher library diversity. Second, by including PCR as an integral step in the procedure, they make PCR-based mutagenesis strategies convenient. The resulting iteration between diversification and selection allows true Darwinian protein evolution to occur in vitro. We describe two such selection methods, ribosome display and mRNA display. In ribosome display, the translated protein remains connected to the ribosome and to its encoding mRNA; the resulting ternary complex is used for selection. In mRNA display, mRNA is first translated and then covalently bonded to the protein it encodes, using puromycin as an adaptor molecule. The covalent mRNA-protein adduct is purified from the ribosome and used for selection. Successful examples of high-affinity, specific target-binding molecules selected by in-vitro display methods include peptides, antibodies, enzymes, and engineered scaffolds, such as fibronectin type III domains and synthetic ankyrins, which can mimic antibody function.

Detection of biological threats. A challenge for directed molecular evolution

The probe technique originated from early attempts of Anton van Leeuwenhoek to contrast microorganisms under the microscope using plant juices, successful staining of tubercle bacilli with synthetic dyes by Paul Ehrlich and discovery of a stain for differentiation of gram-positive and gram-negative bacteria by Hans Christian Gram. The technique relies on the principle that pathogens have unique structural features, which can be recognized by specifically labeled organic molecules. A hundred years of extensive screening efforts led to discovery of a limited assortment of organic probes that are used for identification and differentiation of bacteria. A new challenge--continuous monitoring of biological threats--requires long lasting molecular probes capable of tight specific binding of pathogens in unfavorable conditions. To respond to the challenge, probe technology is being revolutionized by utilizing methods of combinatorial chemistry, phage display and directed molecular evolution. This review describes how molecular evolution methods are applied for development of peptide, antibody and phage probes, and summarizes the author's own data on development of landscape phage probes against Salmonella typhimurium. The performance of the probes in detection of Salmonella is illustrated by a precipitation test, enzyme-linked immunosorbent assay (ELISA), fluorescence-activated cell sorting (FACS) and fluorescent, optical and electron microscopy.

In vivo biotinylated proteins as targets for phage-display selection experiments

Screening phage-displayed combinatorial libraries represents an attractive method for identifying affinity reagents to target proteins. Two critical components of a successful selection experiment are having a pure target protein and its immobilization in a native conformation. To achieve both of these requirements in a single step, we have devised cytoplasmic expression vectors for expression of proteins that are tagged at the amino- or carboxy-terminus (pMCSG16 and 15) via the AviTag, which is biotinylated in vivo with concurrent expression of the BirA biotin ligase. To facilitate implementation in high-throughput applications, the engineered vectors, pMCSG15 and pMCSG16, also contain a ligase-independent cloning site (LIC), which permits up to 100% cloning efficiency. The expressed protein can be purified from bacterial cell lysates with immobilized metal affinity chromatography or streptavidin-coated magnetic beads, and the beads used directly to select phage from combinatorial libraries. From selections using the N-terminally biotinylated version of one target protein, a peptide ligand (Kd= 9 microM) was recovered that bound in a format-dependent manner. To demonstrate the utility of pMCSG16, a set of 192 open reading frames were cloned, and protein was expressed and immobilized for use in high-throughput selections of phage-display libraries.

Binding proteins from alternative scaffolds

The use of so-called protein scaffolds for the generation of novel binding proteins via combinatorial engineering has recently emerged as a powerful alternative to natural or recombinant antibodies. This concept requires an extraordinary stable protein architecture tolerating multiple substitutions or insertions at the primary structural level. With respect to broader applicability it should involve a type of polypeptide fold which is observed in differing natural contexts and with distinct biochemical functions, so that it is likely to be adaptable to novel molecular recognition purposes. The quickly growing number of approaches can be classified into three groups: carrier proteins for the display of single variegated loops, scaffolds providing rigid elements of secondary structure, and protein frameworks supporting a group of conformationally variable loops in a fixed spatial arrangement. Generally, such artificial receptor proteins should be based on monomeric and small polypeptides that are robust, easily engineered, and efficiently produced in inexpensive prokaryotic expression systems. Today, progress in protein library technology allows for the parallel development of immunoglobulin (Ig) as well as scaffold-based affinity reagents. Both biomolecular tools have the potential to complement each other, thus expanding the possibility to find an affinity reagent suitable for a given application. The repertoire of protein scaffolds hitherto recruited for combinatorial protein engineering purposes will probably be further expanded in the future, including both additional natural proteins and de novo designed proteins, contributing to the collection of libraries available at present. In this review both the structural features and the practical use of scaffold proteins will be discussed and exemplified.

Molecular Recognition Properties of FN3 Monobodies that Bind the Src SH3 Domain

We have constructed a phage-displayed library based on the human fibronectin tenth type III domain (FN3) scaffold by randomizing residues in its FG and BC loops. Screening against the SH3 domain of human c-Src yielded six different clones. Five of these contained proline-rich sequences in their FG loop that resembled class I (i.e., +xxPxxP) peptide ligands for the Src SH3 domain. The sixth clone lacked the proline-rich sequence and showed particularly high binding specificity to the Src SH3 domain among various SH3 domains tested. Competitive binding, loop replacement, and NMR perturbation experiments were conducted to analyze the recognition properties of selected binders. The strongest binder was able to pull down full-length c-Src from murine fibroblast cell extracts, further demonstrating the potential of this scaffold for use as an antibody mimetic.

Protein and antibody microarray technology

Following the age of genomics having sequenced the human genome, interest is shifted towards the function of genes. This new age of proteomics brings about a change of methods to study the properties of gene products on a large scale. Protein separation technologies are now applied to allow high-throughput purification and characterisation of proteins. Two-dimensional-gel electrophoresis (2DE) and mass spectrometry (MS) have become widely used tools in the field of proteomics. At the same time, protein and antibody microarrays have been developed as successor of DNA microarrays to soon allow the proteome-wide screening of protein function in parallel. This review is aimed to introduce this new technology and to highlight its current prospects and limitations.

Removing the redundancy from randomised gene libraries

Amino acid substitution plays a vital role in both the molecular engineering of proteins and analysis of structure-activity relationships. High-throughput substitution is achieved by codon randomisation, which generates a library of mutants (a randomised gene library) in a single experiment. For full randomisation, key codons are typically replaced with NNN (64 sequences) or NN(G)(CorT) (32 sequences). This obligates cloning of redundant codons alongside those required to encode the 20 amino acids. As the number of randomised codons increases, there is therefore a progressive loss of randomisation efficiency; the number of genes required per protein rises exponentially. The redundant codons cause amino acids to be represented unevenly; for example, methionine is encoded just once within NNN, whilst arginine is encoded six times. Finally, the organisation of the genetic code makes it impossible to encode functional subsets of amino acids (e.g. polar residues only) in a single experiment. Here, we present a novel solution to randomisation where genetic redundancy is eliminated; the number of different genes equals the number of encoded proteins, regardless of codon number. There is no inherent amino acid bias and any required subset of amino acids may be encoded in one experiment. This generic approach should be widely applicable in studies involving randomisation of proteins.

Phage display for detection of biological threat agents

The essential element of any immuno-based detector device is the probe that binds analyte and, as a part of the analytical platform, generates a measurable signal. The present review summarizes the state of the art in development of the probes for detection of the biological threat agents: toxins, bacteria, spores and viruses. Traditionally, the probes are antibodies, which are isolated from sera of immunized animals or culture media of hybridomas. However, the "natural" antibodies may have limited application in the new generation of real-time field detectors and monitoring systems, where stress-resistant and inexpensive long-livers are required. Phage display is a newcomer in the detection area, whose expertise is development of molecular probes for targeting of various biological structures. The probes can be selection from about billion clone libraries of recombinant phages expressing on their surface a vast variety of peptides and proteins, including antigen-binding fragments of antibodies. The selection procedure, like kind of affinity chromatography, allows separating of phage binders, which are propagated in Escherichia coli bacterial cells and purified using inexpensive technology. Although phage display traditionally is focused more on development of medical preparations and studying molecular recognition in biological systems, there are some examples of its successful use for detection, which are presented in the review. To be used as probes for detection, peptides and antibodies identified by phage display are usually chemically synthesized or produced in bacteria. Another interesting aspect is using of the selected phage itself as a probe in detector devices, like sort of substitute antibodies. This idea is illustrated in the review by "detection" of beta-galactosidase from E. coli with "landscape" phage displaying a dense array of peptide binders on the surface.

A novel strategy to design binding molecules harnessing the modular nature of repeat proteins

Repeat proteins, such as ankyrin or leucine-rich repeat proteins, are ubiquitous binding molecules, which occur, unlike antibodies, intra- and extracellularly. Their unique modular architecture features repeating structural units (repeats), which stack together to form elongated repeat domains displaying variable and modular target-binding surfaces. Based on this modularity, we developed a novel strategy to generate combinatorial libraries of polypeptides with highly diversified binding specificities. This strategy includes the consensus design of self-compatible repeats displaying variable surface residues and their random assembly into repeat domains. We envision that such repeat protein libraries will be highly valuable sources for novel binding molecules especially suitable for intracellular applications.

Engineered fibronectin type III domain with a RGDWXE sequence binds with enhanced affinity and specificity to human alphavbeta3 integrin

Fibronectin is an extracellular matrix protein with broad binding specificity to cell surface receptors, integrins. The tenth fibronectin type III domain (FNfn10) is a small, autonomous domain of fibronectin containing the RGE sequence that is directly involved in integrin binding. However, in isolation FNfn10 only weakly bind to integrins. We reasoned that high-affinity and high-specificity variants of FNfn10 to a particular integrin could be engineered by optimizing residues surrounding the integrin-binding RGD sequence in the flexible FG loop. Affinity maturation of FNfn10 to alphavbeta3 integrin, an integrin up-regulated in angiogenic endothelial cells and in some metastatic tumor cells, yielded alphavbeta3-binding FNfn10 mutants with a novel RGDWXE consensus sequence. We characterized one of the RGDWXE-modified clones, FNfn10-3JCLI4, as purified protein. FNfn10-3JCLI4 binds with high affinity and specificity to purified alphavbeta3 integrin. Alanine scanning mutagenesis suggested that both the tryptophan and glutamic acid residues following the RGD sequence are required for maximal affinity and specificity for alphavbeta3. FNfn10-3JCLI4 specifically stained alphavbeta3-positive cells as detected with flow cytometry and it inhibited alphavbeta3-dependent cell adhesion. As with the anti-alphavbeta3 antibody LM609, FNfn10-3JCLI4 can interfere with in vitro capillary formation. Taken together, these data show that FNfn10-3JCL14 is a specific, high-affinity alphavbeta3-binding protein that can inhibit alphavbeta3-dependent cellular processes similar to an anti-alphavbeta3 monoclonal antibody. These properties, combined with the small, monomeric, cysteine-free and highly stable structure of FNfn10-3JCLI4, may make this protein useful in future applications involving detection and targeting of alphavbeta3-positive cells.

mRNA display: ligand discovery, interaction analysis and beyond

In vitro peptide and protein selection using mRNA display enables the discovery and directed evolution of new molecules from combinatorial libraries. These selected molecules can serve as tools to control and understand biological processes, enhance our understanding of molecular interactions and potentially treat disease in therapeutic applications. In mRNA display, mRNA molecules are covalently attached to the peptide or protein they encode. These mRNA-protein fusions enable in vitro selection of peptide and protein libraries of >10(13) different sequences. mRNA display has been used to discover novel peptide and protein ligands for RNA, small molecules and proteins, as well as to define cellular interaction partners of proteins and drugs. In addition, several unique applications are possible with mRNA display, including self-assembling protein chips and library construction with unnatural amino acids and chemically modified peptides.

A sense of closeness: protein detection by proximity ligation

Highly specific and sensitive procedures will be required to evaluate proteomes. Proximity ligation is a recently introduced mechanism for protein analysis. In this technique, the convergence of sets of protein-binding reagents on individual target molecules juxtaposes attached nucleic acid sequences. Through a ligation reaction a DNA reporter sequence is created, which can be amplified. The procedure thus encodes detected proteins as specific nucleic acid sequences in what may be viewed as a reverse translation reaction.

Exploring the potential of the monobody scaffold: effects of loop elongation on the stability of a fibronectin type III domain

The tenth fibronectin type III domain of human fibronectin (FNfn10) is a small, monomeric beta-sandwich protein, similar to the immunoglobulins. We have developed small antibody mimics, 'monobodies', using FNfn10 as a scaffold. We initially altered two loops of FNfn10 that are structurally equivalent to two of the hypervariable loops of the immunoglobulin domain. In order to assess the possibility of utilizing other loops in FNfn10 for target binding, we determined the effects of the elongation of each loop on the conformational stability of FNfn10. We found that all six loops of FNfn10 allowed the introduction of four glycine residues while retaining the global fold. Insertions in the AB and FG loops exhibited very small degrees of destabilization, comparable to or less than predicted entropic penalties due to the elongation, suggesting the absence of stabilizing interactions in these loops in wild-type FNfn10. Insertions in the BC, CD and DE loops, respectively, resulted in modest destabilization. In contrast, the EF loop elongation was highly destabilizing, consistent with previous studies showing the presence of stabilizing interactions in this loop. These results suggest that all loops, except for the EF loop, can be used for engineering a binding site, thus demonstrating excellent properties of the monobody scaffold.

Directed evolution of high-affinity antibody mimics using mRNA display

We constructed a library of >10(12) unique, covalently coupled mRNA-protein molecules by randomizing three exposed loops of an immunoglobulin-like protein, the tenth fibronectin type III domain (10Fn3). The antibody mimics that bound TNF-alpha were isolated from the library using mRNA display. Ten rounds of selection produced 10Fn3 variants that bound TNF-alpha with dissociation constants (K(d)) between 1 and 24 nM. After affinity maturation, the lowest K(d) measured was 20 pM. Selected antibody mimics were shown to capture TNF-alpha when immobilized in a protein microarray. 10Fn3-based scaffold libraries and mRNA-display allow the isolation of high-affinity, specific antigen binding proteins; potential applications of such binding proteins include diagnostic protein microarrays and protein therapeutics.

TEM-1 beta-lactamase as a scaffold for protein recognition and assay

A large number of different proteins or protein domains have been investigated as possible scaffolds to engineer antibody-like molecules. We have previously shown that the TEM-1 beta-lactamase can accommodate insertions of random sequences in two loops surrounding its active site without compromising its activity. From the libraries that were generated, active enzymes binding with high affinities to monoclonal antibodies raised against prostate-specific antigen, a protein unrelated to beta-lactamase, could be isolated. Antibody binding was shown to affect markedly the enzyme activity. As a consequence, these enzymes have the potential to be used as signaling molecules in direct or competitive homogeneous immunoassay. Preliminary results showed that beta-lactamase clones binding to streptavidin could also be isolated, indicating that some enzymes in the libraries have the ability to recognize proteins other than antibodies. In this paper, we show that, in addition to beta-lactamases binding to streptavidin, beta-lactamase clones binding to horse spleen ferritin and beta-galactosidase could be isolated. Affinity maturation of a clone binding to ferritin allowed obtaining beta-lactamases with affinities comprised between 10 and 20 nM (Kd) for the protein. Contrary to what was observed for beta-lactamases issued from selections on antibodies, enzyme complexation induced only a modest effect on enzyme activity, in the three cases studied. This kind of enzyme could prove useful in replacement of enzyme-conjugated antibodies in enzyme-linked immunosorbant assays (ELISA) or in other applications that use antibodies conjugated to an enzyme.

The low density lipoprotein receptor-related protein mediates fibronectin catabolism and inhibits fibronectin accumulation on cell surfaces

Low density lipoprotein receptor-related protein (LRP) is a member of the low density lipoprotein receptor family, which functions as an endocytic receptor for diverse ligands. In this study, we demonstrate that murine embryonic fibroblasts (MEF-2 cells) and 13-5-1 Chinese hamster ovary cells, which are LRP-deficient, accumulate greatly increased levels of cell-surface fibronectin (Fn), compared with LRP-expressing MEF-1 and CHO-K1 cells. Increased Fn was also detected in conditioned medium from LRP-deficient MEF-2 cells; however, biosynthesis of Fn by MEF-1 and MEF-2 cells was not significantly different. When LRP-deficient cells were dissociated from monolayer culture, increased levels of Fn remained with the cells, as determined by cell-surface protein biotinylation, suggesting an intimate relationship with cell surface-binding sites. The LRP antagonist, receptor-associated protein (RAP), promoted Fn accumulation in association with MEF-1 cells, whereas expression of full-length LRP in MEF-2 cells substantially decreased Fn accumulation, confirming the role of LRP in this process. Purified LRP bound directly to immobilized Fn, and this interaction was inhibited by RAP. Furthermore, MEF-1 cells degraded (125)I-Fn at an increased rate, compared with MEF-2 cells. (125)I-Fn degradation by MEF-1 cells was inhibited by RAP. These results demonstrate that LRP functions as a catabolic receptor for Fn. The function of LRP in Fn degradation and the ability of LRP to regulate levels of other plasma membrane proteins represent possible mechanisms whereby LRP prevents Fn accumulation on cell surfaces.

Probing protein conformational changes in living cells by using designer binding proteins: application to the estrogen receptor

A challenge in understanding the mechanism of protein function in biology is to establish the correlation between functional form in the intracellular environment and high-resolution structures obtained with in vitro techniques. Here we present a strategy to probe conformational changes of proteins inside cells. Our method involves: (i) engineering binding proteins to different conformations of a target protein, and (ii) using them to sense changes in the surface property of the target in cells. We probed ligand-induced conformational changes of the estrogen receptor alpha (ER alpha) ligand-binding domain (LBD). By using yeast two-hybrid techniques, we first performed combinatorial library screening of "monobodies" (small antibody mimics using the scaffold of a fibronectin type III domain) for clones that bind to ER alpha and then characterized their interactions with ER alpha in the nucleus, the native environment of ER alpha, in the presence of various ligands. A library using a highly flexible loop yielded monobodies that specifically recognize a particular ligand complex of ER alpha, and the pattern of monobody specificity was consistent with the structural differences found in known crystal structures of ER alpha-LBD. A more restrained loop library yielded clones that bind both agonist- and antagonist-bound ER alpha. Furthermore, we found that a deletion of the ER alpha F domain that is C-terminally adjacent to the LBD increased the crossreactivity of monobodies to the apo-ER alpha-LBD, suggesting a dynamic nature of the ER alpha-LBD conformation and a role of the F domain in restraining the LBD in an inactive conformation.

Solution structure of the fibronectin type III domain from Bacillus circulans WL-12 chitinase A1

Growing evidence suggests that horizontal gene transfer plays an integral role in the evolution of bacterial genomes. One of the debated examples of horizontal gene transfer from animal to prokaryote is the fibronectin type III domain (FnIIID). Certain extracellular proteins of soil bacteria contain an unusual cluster of FnIIIDs, which show sequence similarity to those of animals and are likely to have been acquired horizontally from animals. Here we report the solution structure of the FnIIID of chitinase A1 from Bacillus circulans WL-12. To the best of our knowledge, this is the first tertiary structure to be reported for an FnIIID from a bacterial protein. The structure of the domain shows significant similarity to FnIIIDs from animal proteins. Sequence comparisons with FnIIIDs from other soil bacteria proteins show that the core-forming residues are highly conserved and, thus, are under strong evolutionary pressure. Striking similarities in the tertiary structures of bacterial FnIIIDs and their mammalian counterparts may support the hypothesis that the evolution of the FnIIID in bacterial carbohydrases occurred horizontally. The total lack of surface-exposed aromatic residues also suggests that the role of this FnIIID is different from those of other bacterial beta-sandwich domains, which function as carbohydrate-binding modules.

Stabilization of a fibronectin type III domain by the removal of unfavorable electrostatic interactions on the protein surface

It is generally considered that electrostatic interactions on the protein surface, such as ion pairs, contribute little to protein stability, although they may play important roles in conformational specificity. We found that the tenth fibronectin type III domain of human fibronectin (FNfn10) is more stable at acidic pH than neutral pH, with an apparent midpoint of transition near pH 4. Determination of pK(a)'s for all the side chain carboxyl groups of Asp and Glu residues revealed that Asp 23 and Glu 9 have an upshifted pK(a). These residues and Asp 7 form a negatively charged patch on the surface of FNfn10, with Asp 7 centrally located between Asp 23 and Glu 9, suggesting repulsive electrostatic interactions among these residues at neutral pH. Mutant proteins, D7N and D7K, in which Asp 7 was replaced with Asn and Lys, respectively, exhibited a modest but significant increase in stability at neutral pH, compared to the wild type, and they no longer showed pH dependence of stability. The pK(a)'s of Asp 23 and Glu 9 in these mutant proteins shifted closer to their respective unperturbed values, indicating that the unfavorable electrostatic interactions have been reduced in the mutant proteins. Interestingly, the wild-type and mutant proteins were all stabilized to a similar degree by the addition of 1 M sodium chloride at both neutral and acidic pH, suggesting that the repulsive interactions between the carboxyl groups cannot be effectively shielded by 1 M sodium chloride. These results indicate that repulsive interactions between like charges on the protein surface can destabilize a protein, and protein stability can be significantly improved by relieving these interactions.

Modularity and homology: modelling of the titin type I modules and their interfaces

Titin is a giant muscle protein with a highly modular architecture consisting of multiple repeats of two sequence motifs, named type I and type II. Type I motifs are homologous to members of the fibronectin type 3 (Fn3) superfamily, one of the motifs most widespread in modular proteins. Fn3 domains are thought to mediate protein-protein interactions and to act as spacers. In titin, Fn3 modules are present in two different super-repeated patterns, likely to be involved in sarcomere assembly through interactions with A-band proteins. Here, we discuss results from homology modelling the whole family of Fn3 domains in titin. Homology modelling is a powerful tool that will play an increasingly important role in the post-genomic era. It is particularly useful for extending experimental structure determinations of parts of multidomain proteins that contain multiple copies of the same motif. The 3D structures of a representative titin type I domain and of other extracellular Fn3 modules were used as a template to model the structures of the 132 copies in titin. The resulting models suggest residues that contribute to the fold stability and allow us to distinguish these from residues likely to have functional importance. In particular, analysis of the models and mapping of the consensus sequence onto the 3D structure suggest putative surfaces of interaction with other proteins. From the structures of isolated modules and the pattern of conservation in the multiple alignment of the whole titin Ig and Fn3 families, it is possible to address the question of how tandem modules are assembled. Our predictions can be validated experimentally.

Isolation of the new antigen receptor from wobbegong sharks, and use as a scaffold for the display of protein loop libraries

The new antigen receptor (NAR) from nurse sharks consists of an immunoglobulin variable domain attached to five constant domains, and is hypothesised to function as an antigen-binding antibody-like molecule. To determine whether the NAR is present in other species we have isolated a number of new antigen receptor variable domains from the spotted wobbegong shark (Orectolobus maculatus) and compared their structure to that of the nurse shark protein. To determine whether these wNARs can function as antigen-binding proteins, we have used them as scaffolds for the construction of protein libraries in which the CDR3 loop was randomised, and displayed the resulting recombinant domains on the surface of fd bacteriophages. On selection against several protein antigens, the highest affinity wNAR proteins were generated against the Gingipain K protease from Porphyromonas gingivalis. One wNAR protein bound Gingipain K specifically by ELISA and BIAcore analysis and, when expressed in E. coli and purified by affinity chromatography, eluted from an FPLC column as a single peak consistent with folding into a monomeric protein. Naturally occurring nurse shark and wobbegong NAR variable domains exhibit conserved cysteine residues within the CDR1 and CDR3 loops which potentially form disulphide linkages and enhance protein stability; proteins isolated from the in vitro NAR wobbegong library showed similar selection for such paired cysteine residues. Thus, the New Antigen Receptor represents a protein scaffold with possible stability advantages over conventional antibodies when used in in vitro molecular libraries.