Attachment of fibroblasts on smooth and microgrooved polystyrene

Cultivated Meat from Aligned Muscle Layers and Adipose Layers Formed from Glutenin Films

Cultivated meat production is a promising technology to generate meat while reducing the reliance on traditional animal farming. Biomaterial scaffolds are critical components in cultivated meat production, enabling cell adhesion, proliferation, differentiation, and orientation. In the present work, naturally derived glutenin was fabricated into films with and without surface patterning and in the absence of toxic cross-linking or stabilizing agents for cell culture related to cultivated meat goals. The films were stable in culture media for at least 28 days, and the surface patterns induced cell alignment and guided myoblast organization (C2C12s) and served as a substrate for 3T3-L1 adipose cells. The films supported adhesion, proliferation, and differentiation with mass balance considerations (films, cells, and matrix production). Freeze-thaw cycles were applied to remove cells from glutenin films and monitor changes in glutenin mass with respect to culture duration. Extracellular matrix (ECM) extraction was utilized to quantify matrix deposition and changes in the original biomaterial mass over time during cell cultivation. Glutenin films with C2C12s showed mass increases with time due to cell growth and new collagen-based ECM expression during proliferation and differentiation. All mass balances were compared among cell and noncell systems as controls, along with gelatin control films, with time-dependent changes in the relative content of film, matrix deposition, and cell biomass. These data provide a foundation for cell/biomaterial/matrix ratios related to time in culture as well as nutritional and textural features.

Edible films for cultivated meat production

Biomaterial scaffolds are critical components in cultivated meat production for enabling cell adhesion, proliferation, differentiation and orientation. Currently, there is limited information on the fabrication of edible/biodegradable scaffolds for cultivated meat applications. In the present work, several abundant, naturally derived biomaterials (gelatin, soy, glutenin, zein, cellulose, alginate, konjac, chitosan) were fabricated into films without toxic cross-linking or stabilizing agents. These films were investigated for support of the adhesion, proliferation and differentiation of murine and bovine myoblasts. These biomaterials supported cell viability, and the protein-based films showed better cell adhesion than the polysaccharide-based films. Surface patterns induced cell alignment and guided myoblast differentiation and organization on the glutenin and zein films. The mechanical properties of the protein films were also assessed and suggested that a range of properties can be achieved to meet food-related goals. Overall, based on adherence, proliferation, differentiation, mechanics, and material availability, protein-based films, particularly glutenin and zein, showed the most promise for cultivated meat applications. Ultimately, this work presents a comparison of suitable biomaterials for cultivated meat applications and suggests future efforts to optimize scaffolds for efficacy and cost.

Micropatterned Fibrous Scaffold Produced by Using Template-Assisted Electrospinning Technique for Wound Healing Application

This paper describes the fabrication of a structural scaffold consisting of both randomly oriented nanofibers and triangular prism patterns on the scaffold surface using a combination technique of electrospinning and collector templates. The polycaprolactone (PCL) nanofibers were electrospun over a triangular prism pattern mold, which acted as a template. The deposited scaffold was removed from the template to produce a standalone structural scaffold of three-dimensional micropatterned nanofibers. The fabricated structural scaffold was compared with flat randomly oriented nanofibers based on in vitro and in vivo studies. The in vitro study indicated that the structural scaffold demonstrated higher fibroblast cell proliferation, cell elongation with a 13.48 ± 2.73 aspect ratio and 70% fibroblast cell orientation compared with flat random nanofibers. Among the treatment groups, the structural scaffold escalated the wound closure to 92.17% on day 14. Histological staining of the healed wound area demonstrated that the structural scaffold exhibited advanced epithelization of the epidermal layer accompanied by mild inflammation. The proliferated fibroblast cells and collagen fibers in the structural scaffold appeared denser and arranged more horizontally. These results determined the potential of micropatterned scaffolds for stimulating cell behavior and their application for wound healing.

Peptidic biofunctionalization of laser patterned dental zirconia: A biochemical-topographical approach

A dual approach employing peptidic biofunctionalization and laser micro-patterns on dental zirconia was explored, with the aim of providing a flexible tool to improve tissue integration of restorations. Direct laser interference patterning with a femtosecond Ti:Sapphire laser was employed, and two periodic grooved patterns were produced with a periodicity of 3 and 10 μm. A platform containing the cell-adhesive RGD and the osteogenic DWIVA peptides was used to functionalize the grooved surfaces. Topography and surface damage were characterized by confocal laser scanning (CLSM), scanning electron and scanning transmission electron microscopy techniques. The surface patterns exhibited a high homogeneity and subsurface damage was found in the form of nano-cracks and nano-pores, at the bottom of the valleys. Accelerated tests in water steam were carried out to assess hydrothermal degradation resistance, which slightly decreased after the laser treatment. Interestingly, the detrimental effects of the laser modification were reverted by a post-laser thermal treatment. The attachment of the molecule was verified trough fluorescence CLSM and X-ray photoelectron spectroscopy. Finally, the biological properties of the surfaces were studied in human mesenchymal stem cells. Cell adhesion, morphology, migration and differentiation were investigated. Cells on grooved surfaces displayed an elongated morphology and aligned along the patterns. On these surfaces, migration was greatly enhanced along the grooves, but also highly restricted in the perpendicular direction as compared to flat specimens. After biofunctionalization, cell number and cell area increased and well-developed cell cytoskeletons were observed. However, no effects on cell migration were found for the peptidic platform. Although some osteogenic potential was found in specimens grooved with a periodicity of 10 μm, the largest effects were observed from the biomolecule, which favored upregulation of several genes related to osteoblastic differentiation in all the surfaces.

Grooved hydroxyapatite scaffold modulates mitochondria homeostasis and thus promotes osteogenesis in bone mesenchymal stromal cells

Hydroxyapatite scaffolds (HASs) are widely studied as suitable materials for bone replacement scaffolds due to their chemical similarities to organic materials. In our previous study, a novel HAS with a 25–30-µm groove structure (HAS-G) exhibited enhanced osteogenesis of bone mesenchymal stromal cells (BMSCs) compared with HAS, potentially by modulating the macrophage-induced immune microenvironment. However, the exact effects of different surface patterns on the physiological processes of attached cells is not known. The present study aimed to determine the effects of HAS-G on the osteogenesis and physiological processes in BMSCs. Cell counting kit-8 assays and propidium iodide staining followed by flow cytometry were performed, and the results demonstrated that both in normal medium and differentiating medium, HAS-G promoted cell proliferation by decreasing the proportion of G1/G0 cells and decreased reactive oxygen species (ROS) accumulation in BMSCs compared with HAS. Detection markers of osteogenesis revealed that compared with HAS, HAS-G increased runt-related transcription factor 2, osteocalcin and osteopontin protein levels and promoted osteogenesis, which was further confirmed by Alizarin Red S staining. Following JC-1 staining, it was observed that HAS-G maintained the mitochondrial membrane potential, similar to that achieved by N-acetylcysteine pretreatment. In addition, compared with those of HAS, HAS-G decreased mitochondrial ROS levels, which potentially contributed to the promotion of osteogenesis. The results also demonstrated that HAS-G inhibited mitophagy induced by ROS accumulation and ATP synthesis compared with HAS. In conclusion, HAS-G decreased ROS accumulation and mitophagy and thus promoted osteogenesis of BMSCs, indicating that ROS modulation of HAS-G may serve a key role in osteogenesis.

Enhanced Osseointegration of Titanium Alloy Implants with Laser Microgrooved Surfaces and Graphene Oxide Coating

Rapid and effective osseointegration, as a critical factor in affecting the success rate of titanium (Ti) implants in orthopedic applications, is significantly affected by their surface microstructure and chemical composition. In this work, surface microgrooved Ti-6Al-4V alloys with graphene oxide coating (Ti-G-GO) were fabricated by a combination of laser processing and chemical assembly techniques. The osteogenic capability in vitro and new bone formation in vivo of the implants were systematically investigated, and biomechanical pull-out tests of the screws were also performed. First, in vitro studies indicated that the optimal microgroove width of the titanium alloy surface was 45 μm (Ti-G), and the optimum GO concentration was 1 mg/mL. Furthermore, the effects of the surface microstructure and GO coating on the in vitro bioactivity were investigated through culturing bone marrow mesenchymal stem cells (BMSCs) on the surface of titanium alloy plates. The results showed that the BMSCs cultured on the Ti-G-GO group exhibited the best adhesion, proliferation, and differentiation, compared with that on the Ti-G and Ti groups. Micro-computed tomography evaluation, histological analysis, and pull-out testing demonstrated that both Ti-G and Ti-G-GO implants had the higher osseointegration than the untreated Ti implant. Moreover, the osteogenic capability of the Ti-G-GO group appeared to be superior to that of the Ti-G group, which could be attributed to the improvement of surface wettability and apatite formation by the GO coatings. These results suggest that the combination of the microgroove structure and GO coatings exhibits considerable potential for enhancing the surface bioactivation of materials, and the combination modification is expected to be used on engineered titanium alloy surfaces to enhance osseointegration for orthopedic applications.

The role of nonmuscle myosin 2A and 2B in the regulation of mesenchymal cell contact guidance

Contact guidance refers to the ability of cells to sense the geometrical features of the microenvironment and respond by changing their shape and adopting the appropriate orientation. Inhibition and ablation of nonmuscle myosin 2 (NM2) paralogues have demonstrated their importance for contact guidance. However, the specific roles of the NM2 paralogues have not been systematically studied. In this work we use micropatterned substrates to examine the roles of NM2A and NM2B and to elucidate the relationship of the microenvironment, actomyosin, and microtubules in contact guidance. We show that contact guidance is preserved following loss of NM2B and that expression of NM2A alone is sufficient to establish an appropriate orientation of the cells. Loss of NM2B and overexpression of NM2A result in a prominent cell polarization that is found to be linked to the increased alignment of microtubules with the actomyosin scaffold. Suppression of actomyosin with blebbistatin reduces cell polarity on a flat surface, but not on a surface with contact guidance cues. This indicates that the lost microtubule-actomyosin interactions are compensated for by microtubule-microenvironment interactions, which are sufficient to establish cell polarity through contact guidance.

Strategies for Optimizing the Soft Tissue Seal around Osseointegrated Implants

Percutaneous and permucosal devices such as catheters, infusion pumps, orthopedic, and dental implants are commonly used in medical treatments. However, these useful devices breach the soft tissue barrier that protects the body from the outer environment, and thus increase bacterial infections resulting in morbidity and mortality. Such associated infections can be prevented if these devices are effectively integrated with the surrounding soft tissue, and thus creating a strong seal from the surrounding environment. However, so far, there are no percutaneous/permucosal medical devices able to prevent infection by achieving strong integration at the soft tissue-device interface. This review gives an insight into the current status of research into soft tissue-implant interface and the challenges associated with these interfaces. Biological soft/hard tissue interfaces may provide insights toward engineering better soft tissue interfaces around percutaneous devices. In this review, focus is put on the history and current findings as well as recent progress of the strategies aiming to develop a strong soft tissue seal around osseointegrated implants, such as orthopedic and dental implants.

Microgroove and Collagen-poly(ε-caprolactone) Nanofiber Mesh Coating Improves the Mechanical Stability and Osseointegration of Titanium Implants

The effect of depositing a collagen (CG)-poly-ε-caprolactone (PCL) nanofiber mesh (NFM) at the microgrooves of titanium (Ti) on the mechanical stability and osseointegration of the implant with bone was investigated using a rabbit model. Three groups of Ti samples were produced: control Ti samples where there were no microgrooves or CG-PCL NFM, groove Ti samples where microgrooves were machined on the circumference of Ti, and groove-NFM Ti samples where CG-PCL NFM was deposited on the machined microgrooves. Each group of Ti samples was implanted in the rabbit femurs for eight weeks. The mechanical stability of the Ti/bone samples were quantified by shear strength from a pullout tension test. Implant osseointegration was evaluated by a histomorphometric analysis of the percentage of bone and connective tissue contact with the implant surface. The bone density around the Ti was measured by micro–computed tomography (μCT) analysis. This study found that the shear strength of groove-NFM Ti/bone samples was significantly higher compared to control and groove Ti/bone samples (p < 0.05) and NFM coating influenced the bone density around Ti samples. In vivo histomorphometric analyses show that bone growth into the Ti surface increased by filling the microgrooves with CG-PCL NFM. The study concludes that a microgroove assisted CG-PCL NFM coating may benefit orthopedic implants.

Prediction of Cell Alignment on Cyclically Strained Grooved Substrates

Cells respond to both mechanical and topographical stimuli by reorienting and reorganizing their cytoskeleton. Under certain conditions, such as for cells on cyclically stretched grooved substrates, the effects of these stimuli can be antagonistic. The biophysical processes that lead to the cellular reorientation resulting from such a competition are not clear yet. In this study, we hypothesized that mechanical cues and the diffusion of the intracellular signal produced by focal adhesions are determinants of the final cellular alignment. This hypothesis was investigated by means of a computational model, with the aim to simulate the (re)orientation of cells cultured on cyclically stretched grooved substrates. The computational results qualitatively agree with previous experimental studies, thereby supporting our hypothesis. Furthermore, cellular behavior resulting from experimental conditions different from the ones reported in the literature was simulated, which can contribute to the development of new experimental designs.

Mechanochemical mechanism of integrin clustering modulated by nanoscale ligand spacing and rigidity of extracellular substrates

Experimental findings indicate that cell function and behavior such as cell growth, division, migration and differentiation, are subtly regulated via integrin-dependent cell adhesion. Cell adhesion is influenced by nanoscale ligand spacing and rigidity of extracellular substrates, as cell adhesion drops greatly when the ligand spacing is larger than ~60nm, and cell adhesion is stronger on stiff than soft substrates. However, how nanoscale ligand spacing and substrate stiffness jointly affect integrin clustering and hence nascent cell adhesion remains to be elucidated. To quantitatively investigate the phenomena and the underlying mechanochemical mechanism of integrin clustering modulated by ligand spacing and substrate stiffness, we introduced Monte Carlo simulations varying the values of ligand spacing and substrate stiffness. Moreover, the effects of integrin number, integrin binding free energy, integrin association free energy, and local ligand spacing were investigated. The simulation results showed that integrin clustering decreased sharply, when ligand spacing was relatively large such as d_L>60nm in the current simulations, regardless of substrate rigidities, though with close spacing, the clustering increased with the substrate stiffness. The investigation contributes to the goals of understanding and predicting experimental phenomena, directing and optimizing biomaterial design, and manipulating integrin-dependent cell-substrate adhesion in tissue engineering.

Contact guidance requires spatial control of leading-edge protrusion

Subcellular mechanisms underlying contact guidance are incompletely understood. Use of micoropatterned substrates and quantitative analysis of protrusion dynamics shows that contact guidance is mediated predominately though spatial regulation of protrusions and mediated through myosin II– and Rac1-mediated feedbacks.

In vivo, geometric cues from the extracellular matrix (ECM) are critical for the regulation of cell shape, adhesion, and migration. During contact guidance, the fibrillar architecture of the ECM promotes an elongated cell shape and migration along the fibrils. The subcellular mechanisms by which cells sense ECM geometry and translate it into changes in shape and migration direction are not understood. Here we pattern linear fibronectin features to mimic fibrillar ECM and elucidate the mechanisms of contact guidance. By systematically varying patterned line spacing, we show that a 2-μm spacing is sufficient to promote cell shape elongation and migration parallel to the ECM, or contact guidance. As line spacing is increased, contact guidance increases without affecting migration speed. To elucidate the subcellular mechanisms of contact guidance, we analyze quantitatively protrusion dynamics and find that the structured ECM orients cellular protrusions parallel to the ECM. This spatial organization of protrusion relies on myosin II contractility, and feedback between adhesion and Rac-mediated protrusive activity, such that we find Arp2/3 inhibition can promote contact guidance. Together our data support a model for contact guidance in which the ECM enforces spatial constraints on the lamellipodia that result in cell shape elongation and enforce migration direction.

Nano- and microstructured materials for in vitro studies of the physiology of vascular cells

The extracellular environment of vascular cells in vivo is complex in its chemical composition, physical properties, and architecture. Consequently, it has been a great challenge to study vascular cell responses in vitro, either to understand their interaction with their native environment or to investigate their interaction with artificial structures such as implant surfaces. New procedures and techniques from materials science to fabricate bio-scaffolds and surfaces have enabled novel studies of vascular cell responses under well-defined, controllable culture conditions. These advancements are paving the way for a deeper understanding of vascular cell biology and materials-cell interaction. Here, we review previous work focusing on the interaction of vascular smooth muscle cells (SMCs) and endothelial cells (ECs) with materials having micro- and nanostructured surfaces. We summarize fabrication techniques for surface topographies, materials, geometries, biochemical functionalization, and mechanical properties of such materials. Furthermore, various studies on vascular cell behavior and their biological responses to micro- and nanostructured surfaces are reviewed. Emphasis is given to studies of cell morphology and motility, cell proliferation, the cytoskeleton and cell-matrix adhesions, and signal transduction pathways of vascular cells. We finalize with a short outlook on potential interesting future studies.

Effect of topographical control by a micro-molding process on the activity of human Mesenchymal Stem Cells on alumina ceramics

BACKGROUND

Numerous studies have reported that microgrooves on metal and polymer materials can affect cell adhesion, proliferation, differentiation and guidance. However, our knowledge of the cell activity associated with microgrooves on ceramics, such as alumina, zirconia, hydroxyapatite and etc, is very incomplete, owing to difficulties in the engraving of microgrooves on the hard surface of the base material. In this study, microgrooves on alumina were fabricated by a casting process using a polydimethylsiloxane micro-mold. The cell responses of Human Mesenchymal Stem Cells on the alumina microgrooves were then evaluated.

RESULTS

Microgrooves on an alumina surface by micro-mold casting can enhance the adhesion, differentiation of osteoblasts as well as gene expression related to osteoblast differentiation. The ALP activity and calcium concentration of the cells on alumina microgrooves were increased by more than twice compared to a non-microgrooved alumina surface. Moreover, regarding the osteoblast differentiation of hMSCs, the expression of ALP, RUNX2, OSX, OC and OPN on the microgrooved alumina were all significantly increased by 1.5 ~ 2.5 fold compared with the non-microgrooved alumina.

CONCLUSION

Altering the topography on alumina by creating microgrooves using a micro-molding process has an important impact on the behavior of hMSCs, including the adhesion, differentiation of osteoblasts and osteoblast-specific gene expression. The significant increase in hMSC activity is explained by the increasing of material transportation in parallel direction and by the extending of spreading distance in perpendicular direction.

Heading in the Right Direction: Understanding Cellular Orientation Responses to Complex Biophysical Environments

The aim of cardiovascular regeneration is to mimic the biological and mechanical functioning of tissues. For this it is crucial to recapitulate the in vivo cellular organization, which is the result of controlled cellular orientation. Cellular orientation response stems from the interaction between the cell and its complex biophysical environment. Environmental biophysical cues are continuously detected and transduced to the nucleus through entwined mechanotransduction pathways. Next to the biochemical cascades invoked by the mechanical stimuli, the structural mechanotransduction pathway made of focal adhesions and the actin cytoskeleton can quickly transduce the biophysical signals directly to the nucleus. Observations linking cellular orientation response to biophysical cues have pointed out that the anisotropy and cyclic straining of the substrate influence cellular orientation. Yet, little is known about the mechanisms governing cellular orientation responses in case of cues applied separately and in combination. This review provides the state-of-the-art knowledge on the structural mechanotransduction pathway of adhesive cells, followed by an overview of the current understanding of cellular orientation responses to substrate anisotropy and uniaxial cyclic strain. Finally, we argue that comprehensive understanding of cellular orientation in complex biophysical environments requires systematic approaches based on the dissection of (sub)cellular responses to the individual cues composing the biophysical niche.

Lithography-free fabrication of reconfigurable substrate topography for contact guidance

Mammalian cells detect and respond to topographical cues presented in natural and synthetic biomaterials both in vivo and in vitro. Micro- and nano-structures influence the adhesion, morphology, proliferation, migration, and differentiation of many phenotypes. Although the mechanisms that underpin cell-topography interactions remain elusive, synthetic substrates with well-defined micro- and nano-structures are important tools to elucidate the origin of these responses. Substrates with reconfigurable topography are desirable because programmable cues can be harmonized with dynamic cellular responses. Here we present a lithography-free fabrication technique that can reversibly present topographical cues using an actuation mechanism that minimizes the confounding effects of applied stimuli. This method utilizes strain-induced buckling instabilities in bilayer substrate materials with rigid uniform silicon oxide membranes that are thermally deposited on elastomeric substrates. The resulting surfaces are capable of reversible of substrates between three distinct states: flat substrates (A = 1.53 ± 0.55 nm; Rms = 0.317 ± 0.048 nm); parallel wavy grating arrays (A∥= 483.6 ± 7.8 nm; λ∥= 4.78 ± 0.16 μm); perpendicular wavy grating arrays (A⊥= 429.3 ± 5.8 nm; λ⊥= 4.95 ± 0.36 μm). The cytoskeleton dynamics of 3T3 fibroblasts in response to these surfaces was measured using optical microscopy. Fibroblasts cultured on dynamic substrates that are switched from flat to topographic features (FLAT-WAVY) exhibit a robust and rapid change in gross morphology as measured by a reduction in circularity from 0.30 ± 0.13 to 0.15 ± 0.08 after 5 min. Conversely, dynamic substrate sequences of FLAT-WAVY-FLAT do not significantly alter the gross steady-state morphology. Taken together, substrates that present topographic structures reversibly can elucidate dynamic aspects of cell-topography interactions.

Studying the influence of surface topography on bacterial adhesion using spatially organized microtopographic surface patterns

The influence of surface topography on bacterial adhesion has been investigated using a range of spatially organized microtopographic surface patterns generated on polydimethylsiloxane (PDMS) and three unrelated bacterial strains. The results presented indicate that bacterial cells actively choose their position to settle, differentiating upper and lower areas in all the surface patterns evaluated. Such selective adhesion depends on the cells' size and shape relative to the dimensions of the surface topographical features and surface hydrophobicity/hydrophilicity. Moreover, it was found that all the topographies investigated provoke a significant reduction in bacterial adhesion (30-45%) relative to the smooth control samples regardless of surface hydrophobicity/hydrophilicity. This remarkable finding constitutes a general phenomenon, occurring in both Gram-positive and Gram-negative cells with spherical or rod shape, dictated by only surface topography. Collectively, the results presented in this study demonstrate that spatially organized microtopographic surface patterns represent a promising approach to controlling/inhibiting bacterial adhesion and biofilm formation.

Nanotopographic substrates of poly (methyl methacrylate) do not strongly influence the osteogenic phenotype of mesenchymal stem cells in vitro

The chemical, mechanical, and topographical features of the extracellular matrix (ECM) have all been documented to influence cell adhesion, gene expression, migration, proliferation, and differentiation. Topography plays a key role in the architecture and functionality of various tissues in vivo, thus raising the possibility that topographic cues can be instructive when incorporated into biomaterials for regenerative applications. In the literature, there are discrepancies regarding the potential roles of nanotopography to enhance the osteogenic phenotype of mesenchymal stem cells (MSC). In this study, we used thin film substrates of poly(methyl methacrylate) (PMMA) with nanoscale gratings to investigate the influence of nanotopography on the osteogenic phenotype of MSCs, focusing in particular on their ability to produce mineral similar to native bone. Topography influenced focal adhesion size and MSC alignment, and enhanced MSC proliferation after 14 days of culture. However, the osteogenic phenotype was minimally influenced by surface topography. Specifically, alkaline phosphatase (ALP) expression was not increased on nanotopographic films, nor was calcium deposition improved after 21 days in culture. Ca: P ratios were similar to native mouse bone on films with gratings of 415 nm width and 200 nm depth (G415) and 303 nm width and 190 nm depth (G303). Notably, all surfaces had Ca∶P ratios significantly lower than G415 films. Collectively, these data suggest that, PMMA films with nanogratings are poor drivers of an osteogenic phenotype.

Roughness statistical influence on cell adhesion using profilometry and multiscale analysis

In this study, two series of 11 samples of TiAl6V4 titanium alloy and 316L stainless steel have been polished in an isotropic manner at different levels in order to quantify the influence of biomaterial roughness on cell behavior. Topography was measured by a tactile profilometer and a multiscale analysis has been carried out. Human osteoblasts have been cultured on those samples. It appears that roughness has no reproducible effect on the cell behavior except an influence on cell orientation on the wider grooves. As a conclusion, biomaterial surface damage, in the roughness range between Ra = 0.01 and 0.1 μm, has no influence on cell-adhesion mechanisms when roughness is isotropic and groove width is inferior to a critical value.

Cells cultured on microgrooves with or without surface coating: correlation between cell alignment, spreading and local membrane deformation

The behaviors of cells cultured on patterned substrates vary with the material stiffness, the geometry and the biochemical properties of the pattern. By using a reversed cell imprinting (RCI) technique, together with phase contrast microscopy, scanning electron microscopy (SEM) and atomic force microscopy (AFM), we have exploited reversed side cellular morphology on patterned microgrooves of different geometries with or without surface coating of adhesion molecules. We have shown a close correlation between the effect of contact guidance and penetration of cellular membrane. Without surface coating, roughly 80% of HeLa cells were aligned along the groove direction regardless of the groove spacing. When the microgrooves were coated with fibronectin, the area of cell spreading was increased but the percentage of aligned cells was significantly decreased. In both cases, the deformation of cell membrane at the cell-pattern interfaces could be measured. We found that the local penetration of the cellular membrane into the grooves was correlated to the cellular alignment for both HeLa and NIH 3T3 cells, and that such a correlation was cell-type dependent.

Passive control of cell locomotion using micropatterns: the effect of micropattern geometry on the migratory behavior of adherent cells

Directed cell migration is critical to a variety of biological and physiological processes. Although simple topographical patterns such as parallel grooves and three-dimensional post arrays have been studied to guide cell migration, the effect of the dimensions and shape of micropatterns, which respectively represent the amount and gradient of physical spatial cues, on cell migration has not yet been fully explored. This motivates a quantitative characterization of cell migration in response to micropatterns having different widths and divergence angles. The changes in the migratory (and even locational) behavior of adherent cells, when the cells are exposed to physical spatial cues imposed by the micropatterns, are explored here using a microfabricated biological platform, nicknamed the "Rome platform". The Rome platform, made of a biocompatible, ultraviolet (UV) curable polymer (ORMOCOMP), consists of 3 μm thick micropatterns with different widths of 3 to 75 μm and different divergence angles of 0.5 to 5.0°. The migration paths through which NIH 3T3 fibroblasts move on the micropatterns are analyzed with a persistent random walk model, thus quantifying the effect of the divergence angle of micropatterns on cell migratory characteristics such as cell migration speed, directional persistence time, and random motility coefficient. The effect of the width of micropatterns on cell migratory characteristics is also extensively investigated. Cell migration direction is manipulated by creating the gradient of physical spatial cues (that is, divergence angle of micropatterns), while cell migration speed is controlled by modulating the amount of them (namely, width of micropatterns). In short, the amount and gradient of physical spatial cues imposed by changing the width and divergence angle of micropatterns make it possible to control the rate and direction of cell migration in a passive way. These results offer a potential for reducing the healing time of open wounds with a smart wound dressing engraved with micropatterns (or microscaffolds).

Engineering microscale topographies to control the cell-substrate interface

Cells in their in vivo microenvironment constantly encounter and respond to a multitude of signals. While the role of biochemical signals has long been appreciated, the importance of biophysical signals has only recently been investigated. Biophysical cues are presented in different forms including topography and mechanical stiffness imparted by the extracellular matrix and adjoining cells. Microfabrication technologies have allowed for the generation of biomaterials with microscale topographies to study the effect of biophysical cues on cellular function at the cell-substrate interface. Topographies of different geometries and with varying microscale dimensions have been used to better understand cell adhesion, migration, and differentiation at the cellular and sub-cellular scales. Furthermore, quantification of cell-generated forces has been illustrated with micropillar topographies to shed light on the process of mechanotransduction. In this review, we highlight recent advances made in these areas and how they have been utilized for neural, cardiac, and musculoskeletal tissue engineering application.

Automatic Actin Filament Quantification of Osteoblasts and Their Morphometric Analysis on Microtextured Silicon-Titanium Arrays

Microtexturing of implant surfaces is of major relevance in the endeavor to improve biorelevant implant designs. In order to elucidate the role of biomaterial’s topography on cell physiology, obtaining quantitative correlations between cellular behavior and distinct microarchitectural properties is in great demand. Until now, the microscopically observed reorganization of the cytoskeleton on structured biomaterials has been difficult to convert into data. We used geometrically microtextured silicon-titanium arrays as a model system. Samples were prepared by deep reactive-ion etching of silicon wafers, resulting in rectangular grooves (width and height: 2 µm) and cubic pillars (pillar dimensions: 2 × 2 × 5 and 5 × 5 × 5 µm); finally sputter-coated with 100 nm titanium. We focused on the morphometric analysis of MG-63 osteoblasts, including a quantification of the actin cytoskeleton. By means of our novel software FilaQuant, especially developed for automatic actin filament recognition, we were first able to quantify the alterations of the actin network dependent on the microtexture of a material surface. The cells’ actin fibers were significantly reduced in length on the pillared surfaces versus the grooved array (4–5 fold) and completely reorganized on the micropillars, but without altering the orientation of cells. Our morpho-functional approach opens new possibilities for the data correlation of cell-material interactions.

Directing neuronal cell growth on implant material surfaces by microstructuring

For best hearing sensation, electrodes of auditory prosthesis must have an optimal electrical contact to the respective neuronal cells. To improve the electrode-nerve interface, microstructuring of implant surfaces could guide neuronal cells toward the electrode contact. To this end, femtosecond laser ablation was used to generate linear microgrooves on the two currently relevant cochlear implant materials, silicone elastomer and platinum. Silicone surfaces were structured by two different methods, either directly, by laser ablation or indirectly, by imprinting using laser-microstructured molds. The influence of surface structuring on neurite outgrowth was investigated utilizing a neuronal-like cell line and primary auditory neurons. The pheochromocytoma cell line PC-12 and primary spiral ganglion cells were cultured on microstructured auditory implant materials. The orientation of neurite outgrowth relative to the microgrooves was determined. Both cell types showed a preferred orientation in parallel to the microstructures on both, platinum and on molded silicone elastomer. Interestingly, microstructures generated by direct laser ablation of silicone did not influence the orientation of either cell type. This shows that differences in the manufacturing procedures can affect the ability of microstructured implant surfaces to guide the growth of neurites. This is of particular importance for clinical applications, since the molding technique represents a reproducible, economic, and commercially feasible manufacturing procedure for the microstructured silicone surfaces of medical implants.

Submicron-textured biomaterial surface reduces staphylococcal bacterial adhesion and biofilm formation

Staphylococci are among the most important pathogens causing bloodstream infections associated with implanted medical devices. Control of bacterial adhesion to material surfaces is important for prevention of biofilm formation and biomaterial-associated infections. In this study, we hypothesized that submicron (staphylococcal bacterial dimension) surface textures may reduce the bacterial adhesion via a decrease in surface area that bacteria can contact, and subsequently inhibit biofilm formation. Poly(urethane urea) films were textured with two different sizes of submicron pillars via a two-stage replication process. Adhesion of two bacterial strains (Staphylococcus epidermidis RP62A and S. aureus Newman) was assessed over a shear stress range of 0-13.2 dyn cm(-2) using a rotating disk system in physiological buffer solutions. Significant decreases in bacterial adhesion were observed on textured surfaces for both strains compared with smooth controls. Biofilm formation was further tested on surfaces incubated in solution for either 2 or 5 days and it was found that biofilm formation was dramatically inhibited on textured surfaces. The results of the approaches used in this work demonstrate that patterned surface texturing of biomaterials provides an effective means to reduce staphylococcal adhesion and biofilm formation on biomaterial surfaces, and thus to prevent biomaterial-associated infections.

Micro- and nanoengineering approaches to control stem cell-biomaterial interactions

As our population ages, there is a greater need for a suitable supply of engineered tissues to address a range of debilitating ailments. Stem cell based therapies are envisioned to meet this emerging need. Despite significant progress in controlling stem cell differentiation, it is still difficult to engineer human tissue constructs for transplantation. Recent advances in micro- and nanofabrication techniques have enabled the design of more biomimetic biomaterials that may be used to direct the fate of stem cells. These biomaterials could have a significant impact on the next generation of stem cell based therapies. Here, we highlight the recent progress made by micro- and nanoengineering techniques in the biomaterials field in the context of directing stem cell differentiation. Particular attention is given to the effect of surface topography, chemistry, mechanics and micro- and nanopatterns on the differentiation of embryonic, mesenchymal and neural stem cells.

The difference of fibroblast behavior on titanium substrata with different surface characteristics

Connective tissue, one of the main components of peri-implant soft tissue, is key to the formation of the peri-implant mucosal seal and helping to prevent epithelial ingrowth. Rough surfaces (Rs), machined surfaces (Ms) or microgrooved surface (MG) are used in the neck area of commercially available titanium implants. In this paper, we aimed to evaluate the influence of surface topography of titanium substratum on connective tissue fibroblasts to gain a better understanding of this effect. Fibroblasts were cultured on titanium plates with Rs, Ms and MG. Adhesion cell number at day 3 was compared and protein distribution of both F-actin and vinculin was determined to observe cellular structure and adhesion. Cell adhesion strength was compared on each surface. At day 3, the number of fibroblasts attached on each substratum was in the order of MG ≈ Ms > Rs. Fibroblasts strongly expressed vinculin in the peripheral area on Ms and MG, and showed strong F-actin architecture. Decreased expression of vinculin and weaker continuity of F-actin were observed on Rs. Fibroblasts on MG were aligned along the grooves, with a significantly higher cell density, whereas cells on Ms and Rs had no clear orientation. The cell adhesion strength was significantly lower on Rs, and no significant difference was seen between MG and Ms. Both MG and Ms showed greater adhesion cell numbers and adhesion strength of fibroblasts when compared with Rs at day 3. The cell density on MG was greater than those on other substrata.

Sub-micron tailoring of bi-soft segment asymmetric polyurethane membrane surfaces with enhanced hemocompatibility properties

Enhancement of membrane hemocompatibility is achieved through the control of the surface morphology. Bi-soft segment integrally skinned poly(ester urethane urea) (PEUU) membranes containing polycaprolactone (PCL) as a second soft segment are synthesized with PCL-diol ranging from 0% to 15% (w/w). Scanning electron microscopy and atomic force microscopy characterized membrane asymmetry and sub-micron roughnesses, R(a), of top dense surfaces as major assets to the development of platelet/membrane surface interactions. Here we show that the top dense surfaces of asymmetric PEUU membranes can be tailored with different morphologies when the ratio of the two soft segments PPO/PCL varies. A strong correlation between the top surface roughnesses, R(a) and platelet deposition is identified. The membrane with 15% (w/w) of PCL-diol, PEUU 85, shows the smoothest top dense layer with a R(a) as low as 1 nm which is 5 times below the characteristic value of the PEUU membrane with a single soft segment. The PEUU 85 asymmetric membrane displayed minimal platelet deposition and inhibition of extreme stages of platelet activation.

The effect of substrate topography on hFOB cell behavior and initial cell adhesion evaluated by a cytodetacher

This study examined human fetal osteoblast (hFOB) cell morphology, adhesion force, and proliferation on a titanium-coated grooved surface. V-shaped grooves with a depth of 2.4 μm (T1) or 4.8 μm (T2) were produced in silicon wafers using photolithography and wet etching techniques. The grooved substrates were coated with a 200-nm-thick layer of titanium using a sputtering system. Smooth Ti-coated Si wafers were used as control surfaces. Analysis of the scanning electron microscopy observations shows that the cells responded to the micropattern by spreading out and becoming elongated. The MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay indicated that the grooved specimens had a significantly larger number of cells than did the control group after 5- and 15-day cultures. The cytocompatibility of specimens was quantitatively evaluated by a cytodetacher, which directly measures the detachment shear force of an individual cell to the substrate. After 30-min culture, the cell adhesion forces were 48.4, 136.6, and 103.3 nN for the smooth specimen, the T1 specimen, and the T2 specimen, respectively. The cell adhesion strengths were 294, 501, and 590 Pa for the smooth specimen, the T1 specimen, and the T2 specimen, respectively. The cell adhesion force and cell adhesion strength indicate the quality of cell adhesion, explaining the largest number of cells on grooved specimens. The experimental results suggest that the grooved patterns affect the cell shape and cytoskeletal structure, and thus influence the cell proliferation and cell adhesion force. The cytodetachment test with nanonewton resolution is a sensitive method for studying cell-biomaterial interaction.

The Interaction of Osteoblasts With Bone-Implant Materials: 1. The Effect of Physicochemical Surface Properties of Implant Materials

This comparative study of various surface treatments of commercially available implant materials is intended as guidance for orientation among particular surface treatment methods in term of the cell reaction of normal human osteoblasts and blood coagulation. The influence of physicochemical surface parameters such as roughness, surface free energy and wettability on the response of human osteoblasts in the immediate vicinity of implants and on the blood coagulation was studied. The osteoblast proliferation was monitored and the expression of tissue mediators (TNF-α, IL-8, MMP-1, bone alkaline phosphatase, VCAM-1, TGF-β) was evaluated after the cell cultivation onto a wide range of commercially available materials (titanium and Ti6Al4V alloy with various surface treatments, CrCoMo alloy, zirconium oxide ceramics, polyethylene and carbon/carbon composite). The formation of a blood clot was investigated on the samples immersed in a freshly drawn whole rabbit blood using scanning electron microscope. The surfaces with an increased osteoblast proliferation exhibited particularly higher surface roughness (here Ra > 3.5 µm) followed by a high polar part of the surface free energy whereas the effect of wettability played a minor role. The surface roughness was also the main factor regulating the blood coagulation. The blood clot formation analysis showed a rapid coagulum formation on the rough titanium-based surfaces. The titanium with an etching treatment was considered as the most suitable candidate for healing into the bone tissue due to high osteoblast proliferation, the highest production of osteogenesis markers and low production of inflammatory cytokines and due to the most intensive blood clot formation.

Definition of a simple statistical parameter for the quantification of orientation in two dimensions: application to cells on grooves of nanometric depths

Contact guidance is generally evaluated by measuring the orientation angle of cells. However, statistical analyses are rarely performed on these parameters. Here we propose a statistical analysis based on a new parameter sigma, the orientation parameter, defined as the dispersion of the distribution of orientation angles. This parameter can be used to obtain a truncated Gaussian distribution that models the distribution of the data between -90 degrees and +90 degrees. We established a threshold value of the orientation parameter below which the data can be considered to be aligned within a 95% confidence interval. Applying our orientation parameter to cells on grooves and using a modelling approach, we established the relationship sigma=alpha(meas)+(52 degrees -alpha(meas))/(1+C(GDE)R) where the parameter C(GDE) represents the sensitivity of cells to groove depth, and R the groove depth. The values of C(GDE) obtained allowed us to compare the contact guidance of human osteoprogenitor (HOP) cells across experiments involving different groove depths, times in culture and inoculation densities. We demonstrate that HOP cells are able to identify and respond to the presence of grooves 30, 100, 200 and 500 nm deep and that the deeper the grooves, the higher the cell orientation. The evolution of the sensitivity (C(GDE)) with culture time is roughly sigmoidal with an asymptote, which is a function of inoculation density. The sigma parameter defined here is a universal parameter that can be applied to all orientation measurements and does not require a mathematical background or knowledge of directional statistics.

Response of human corneal fibroblasts on silk film surface patterns

Transparent, biodegradable, mechanically robust, and surface-patterned silk films were evaluated for the effect of surface morphology on human corneal fibroblast (hCF) cell proliferation, orientation, and ECM deposition and alignment. A series of dimensionally different surface groove patterns were prepared from optically graded glass substrates followed by casting poly(dimethylsiloxane) (PDMS) replica molds. The features on the patterned silk films showed an array of asymmetric triangles and displayed 37-342 nm depths and 445-3 582 nm widths. hCF DNA content on all patterned films were not significantly different from that on flat silk films after 4 d in culture. However, the depth and width of the grooves influenced cell alignment, while the depth differences affected cell orientation; overall, deeper and narrower grooves induced more hCF orientation. Over 14 d in culture, cell layers and actin filament organization demonstrated that confluent hCFs and their cytoskeletal filaments were oriented along the direction of the silk film patterned groove axis. Collagen type V and proteoglycans (decorin and biglycan), important markers of corneal stromal tissue, were highly expressed with alignment. Understanding corneal stromal fibroblast responses to surface features on a protein-based biomaterial applicable in vivo for corneal repair potential suggests options to improve corneal tissue mimics. Further, the approaches provide fundamental biomaterial designs useful for bioengineering oriented tissue layers, an endemic feature in most biological tissue structures that lead to critical tissue functions.

Cell shape, spreading symmetry and the polarization of stress-fibers in cells

The active regulation of cellular forces during cell adhesion plays an important role in the determination of cell size, shape and internal structure. While on flat, homogeneous and isotropic substrates some cells spread isotropically, others spread anisotropically and assume elongated structures. In addition, in their native environment as well as in vitro experiments, the cell shape and spreading asymmetry can be modulated by the local distribution of adhesive molecules and topography of the environment. We present a simple elastic model, and experiments on stem cells to explain the variation of cell size with the matrix rigidity. In addition, we predict the experimental consequences of two mechanisms of acto-myosin polarization and focus here on the effect of the cell spreading asymmetry on the regulation of the stress-fiber alignment in the cytoskeleton. We show that when cell spreading is sufficiently asymmetric the alignment of acto-myosin forces in the cell increases monotonically with the matrix rigidity; however, in general this alignment is non-monotonic as shown previously. These results highlight the importance of the symmetry characteristics of cell spreading in the regulation of cytoskeleton structure and suggest a mechanism by which different cell types may acquire different morphologies and internal structures in different mechanical environments.

Reversed cell imprinting, AFM imaging and adhesion analyses of cells on patterned surfaces

Cell adhesion and motility depend strongly on the interactions between cells and cell culture substratum. To observe the cell morphology at the interface between cells and artificial substratum or patterned surfaces, we have developed a technique named reversed cell imprinting. After culture and chemical fixation of the cells on a patterned hole array, a liquid polymer was poured on and UV cured, allowing taking off the cell-polymer assembly for a direct observation of the underside cell surface using atomic force microscopy. As expected, we observed local deformation of the cell membrane in the hole area with a penetration depth strongly dependent on the size and depth of the hole as well as the culture time. Quantitative analyses of Hela cells on patterned surfaces of polydimethylsiloxane (PDMS) revealed that the penetration was also position dependent over the cell attachment area due to the non-homogeneous distribution of the membrane stress. With the increase of the culture time, the penetration depth was reduced, in a close correlation with the increase of the cell spreading area. Nevertheless, both cell seeding and adhesion efficiency on high density hole arrays could be significantly increased comparing to that on a smooth surface. Patterned substrates are increasingly required to produce and interrogate new biomaterials for therapeutic benefit. Overall, this work suggests a strategy to endow conventional imaging methods with added functionality to enable easy observation of the underside cell morphology on topographic patterns.