In vitro and in vivo near-infrared photothermal therapy of cancer using polypyrrole organic nanoparticles

Development of folate-conjugated polypyrrole nanoparticles incorporated with nitrogen-doped carbon quantum dots for targeted bioimaging and photothermal therapy

PPy nanoparticles are widely employed as PTT agents, because of their exceptional near-infrared absorption properties. Nonetheless, the efficacy of PTT with PPy nanoparticles is hindered by a challenge, specifically, a lack of precise targeting. In this study, a PTT imaging agent was developed by combining NCQDs having bright green fluorescent properties with PPy nanoparticles along with the masking of folic acid to overcome the challenge of targeting. The synthesized PPy:NCQDs:FA nanocomposite, characterized by extraordinary photothermal property, was utilized for imaging of folate receptor positive (FA+) MCF-7 cancer cells through the emission of green fluorescence by NCQDs incorporated within the nanocomposite. Additionally, these nanoparticles demonstrated a good level of cell viability, exceeding 82 %, even at a concentration of 600 μg mL-1. Even the in vivo toxicity inspection of the nanocomposite exemplified no observed acute toxicity at experimental dosages of 1 and 3 mg per kg body weight. By subjecting MCF-7 cells, inoculated with 100 μg mL-1 of nanocomposite, to NIR laser irradiation for 5 min, a significant decline in cell viability was witnessed, establishing the photothermal therapeutic potency of the nanocomposite. The death of cancer cells induced by nanocomposite was verified through MTT assay, imaging of cells by NCQDs alone, with nanocomposite, and by live/dead cell Calcein AM/PI staining assay. Quantification of induced apoptosis post-laser treatment is conducted through staining with Annexin V-FITC/PI. These findings establish potential use of PPy:NCQDs:FA nanocomposite as versatile theranostic agents, capable of targeted bioimaging and treatment for cancer cells exhibiting folate receptors.

A Comprehensive Systematic Review of the Effects of Photobiomodulation Therapy in Different Light Wavelength Ranges (Blue, Green, Red, and Near-Infrared) on Sperm Cell Characteristics in Vitro and in Vivo

Around 7% of the male population in the world are entangle with considerable situation which is known as male infertility. Photobiomodulation therapy (PBMT) is the application of low-level laser radiation, that recently used to increase or promote the various cell functions including, proliferation, differentiation, ATP production, gene expressions, regulation of reactive oxygen spices (ROS), and also boost the tissue healing and reduction of inflammation. This systematic review's main idea is a comprehensive appraisal of the literatures on subjects of PBMT consequences in four light ranges wavelength (blue, green, red, near-infrared (NIR)) on sperm cell characteristics, in vitro and in vivo. In this study, PubMed, Google Scholar, and Scopus databases were used for abstracts and full-text scientific papers published from 2003-2023 that reported the application of PBM on sperm cells. Criteria's for inclusion and exclusion to review were applied. Finally, the studies that matched with our goals were included, classified, and reported in detail. Also, searched studies were subdivided into the effects of four ranges of light irradiation, including the blue light range (400-500 nm), green light range (500-600 nm), red light range (600-780 nm), and NIR light range (780-3000 nm) of laser irradiation on human or animal sperm cells, in situations of in vitro or in vivo. Searches with our keywords results in 137 papers. After primary analysis, some articles were excluded because they were review articles or incomplete and unrelated studies. Finally, we use the 63 articles for this systematic review. Our category tables were based on the light range of irradiation, source of sperm cells (human or animal cells) and being in vitro or in vivo. Six% of publications reported the effects of blue, 10% green, 53% red and 31% NIR, light on sperm cell. In general, most of these studies showed that PBMT exerted a positive effect on the sperm cell motility. The various effects of PBMT in different wavelength ranges, as mentioned in this review, provide more insights for its potential applications in improving sperm characteristics. PBMT as a treatment method has significant effectiveness for treatment of different medical problems. Due to the lack of reporting data in this field, there is a need for future studies to assessment the biochemical and molecular effects of PBMT on sperm cells for the possible application of this treatment to the human sperm cells before the ART process.

Microfluidic Synthesis of Multifunctional Micro-/Nanomaterials from Process Intensification: Structural Engineering to High Electrochemical Energy Storage

Multifunctional micro-/nanomaterials featuring functional superiority and high value-added physicochemical nature have received immense attention in electrochemical energy storage. Microfluidic synthesis has become an emergent technology for massively producing multifunctional micro-/nanomaterials with tunable microstructure and morphology due to its rapid mass/heat transfer and precise fluid controllability. In this review, the latest progresses and achievements in microfluidic-synthesized multifunctional micro-/nanomaterials are summarized via reaction process intensification, multifunctional micro-/nanostructural engineering and electrochemical energy storage applications. The reaction process intensification mechanisms of various micro-/nanomaterials, including quantum dots (QDs), metal materials, conducting polymers, metallic oxides, polyanionic compounds, metal-organic frameworks (MOFs) and two-dimensional (2D) materials, are discussed. Especially, the multifunctional structural engineering principles of as-fabricated micro-/nanomaterials, such as vertically aligned structure, heterostructure, core-shell structure, and tunable microsphere, are introduced. Subsequently, the electrochemical energy storage application of as-prepared multifunctional micro-/nanomaterials is clarified in supercapacitors, lithium-ion batteries, sodium-ion batteries, all-vanadium redox flow batteries, and dielectric capacitors. Finally, the current problems and future forecasts are illustrated.

Synthesis of a catalytic nanomaterial from polypyrrole and a pro-apoptotic peptide to target mitochondria for multimodal cancer therapy

Development of biocompatible nanomaterials with mitochondria-targeting and multimodal therapeutic activities is important for cancer treatment. Herein, we designed and synthesized a multifunctional pyrrole-based nanomaterial with photothermal effects and mitochondria-targeting properties from polypyrrole and the pro-apoptotic peptide KLA. Different from traditional strategies for the preparation of PPy nanoparticles, we innovatively used the KLA peptide as the template and CuCl2 as the catalyst to trigger the oxidative polymerization of pyrrole for PPy-KLA-Cu nanoparticle formation. Besides, due to the presence of mixed-valence Cu(I)/Cu(II) states, PPy-KLA-Cu nanoparticles also exhibited multienzyme-like activities, such as peroxidase, ascorbate oxidase and glutathione peroxidase activities, which can be exploited to elevate the intracellular ROS level and simultaneously consume GSH in cancer cells. More importantly, the heat generated by PPy-KLA-Cu nanoparticles from NIR irradiation could enhance the nanozymatic activities for ROS elevation and increase the KLA-induced anticancer activity via mitochondrial dysfunction, realizing multimodal treatment of cancer cells with improved therapeutic efficacy.

Laser irradiation of photothermal precursors - a novel approach to produce carbon materials for supercapacitors

A wide array of carbon materials finds extensive utility across various industrial applications today. Nonetheless, the production processes for these materials continue to entail elevated temperatures, necessitate the use of inert atmospheres, and often involve the handling of aggressive and toxic chemicals. The prevalent method for large-scale carbon material production, namely the pyrolysis of waste biomass and polymers, typically unfolds within the temperature range of 500-700 °C under a nitrogen (N2) atmosphere. Unfortunately, this approach suffers from significant energy inefficiency due to substantial heat loss over extended processing durations. In this work, we propose an interesting alternative: the carbonization of photothermal nanocellulose/polypyrrole composite films through CO2 laser irradiation in the presence of air. This innovative technique offers a swift and energy-efficient means of preparing carbon materials. The unique interaction between nanocellulose and polypyrrole imparts the film with sufficient stability to retain its structural integrity post-carbonization. This breakthrough opens up new avenues for producing binder-free electrodes using a rapid and straightforward approach. Furthermore, the irradiated film demonstrates specific and areal capacitances of 159 F g-1 and 62 μF cm-2, respectively, when immersed in a 2 M NaOH electrolyte. These values significantly surpass those achieved by current commercial activated carbons. Together, these attributes render CO2-laser carbonization an environmentally sustainable and ecologically friendly method for carbon material production.

Access to 2,4-Disubstituted Pyrrole-Based Polymer with Long-Wavelength and Stimuli-Responsive Properties via Copper-Catalyzed [3+2] Polycycloaddition

Pyrrole-based polymers (PBPs), a type of fascinating functional polymers, play a crucial role in materials science. However, efficient synthetic strategies of PBPs with diverse structures are mainly focused on conjugated polypyrroles and still remain challenging. Herein, an atom and step economy protocol is described to access various 2,4-disubstituted PBPs by in situ formation of pyrrole core structure via copper-catalyzed [3+2] polycycloaddition of dialkynones and diisocyanoacetates. A series of PBPs is prepared with high molecular weight (Mw up to 18 200 Da) and moderate to good yield (up to 87%), which possesses a fluorescent emission located in the green to yellow light region. Blending the PBPs with polyvinyl alcohol, the stretchable composite films exhibit a significant strengthening of the mechanical properties (tensile stress up to 59 MPa, elongation at break >400%) and an unprecedented stress-responsive luminescence enhancement that over fourfold fluorescent emission intensity is maintained upon stretching up to 100%. On the basis of computational studies, the unique photophysical and mechanical properties are attributed to the substitution of carbonyl chromophores on the pyrrole unit.

Supra-Photothermal CO2 Methanation over Greenhouse-Like Plasmonic Superstructures of Ultrasmall Cobalt Nanoparticles

Improving the solar-to-thermal energy conversion efficiency of photothermal nanomaterials at no expense of other physicochemical properties, e.g., the catalytic reactivity of metal nanoparticles, is highly desired for diverse applications but remains a big challenge. Herein, a synergistic strategy is developed for enhanced photothermal conversion by a greenhouse-like plasmonic superstructure of 4 nm cobalt nanoparticles while maintaining their intrinsic catalytic reactivity. The silica shell plays a key role in retaining the plasmonic superstructures for efficient use of the full solar spectrum, and reducing the heat loss of cobalt nanoparticles via the nano-greenhouse effect. The optimized plasmonic superstructure catalyst exhibits supra-photothermal CO2 methanation performance with a record-high rate of 2.3 mol gCo -1 h-1 , close to 100% CH4 selectivity, and desirable catalytic stability. This work reveals the great potential of nanoscale greenhouse effect in enhancing photothermal conversions through the combination with conventional promoting strategies, shedding light on the design of efficient photothermal nanomaterials for demanding applications.

Development of Human Serum Albumin Fluorescent Probes in Detection, Imaging, and Disease Therapy

Human serum albumin (HSA) acts as a repository and transporter of substances in the blood. An abnormal concentration may indicate the occurrence of liver- and kidney-related diseases, which has attracted people to investigate the precise quantification of HSA in body fluids. Fluorescent probes can combine with HSA covalently or noncovalently to quantify HSA in urine and plasma. Moreover, probes combined with HSA can improve its photophysical properties; probe-HSA has been applied in real-time monitoring and photothermal and photodynamic therapy in vivo. This Review will introduce fluorescent probes for quantitative HSA according to the three reaction mechanisms of spatial structure, enzymatic reaction, and self-assembly and systematically introduce the application of probes combined with HSA in disease imaging and phototherapy. It will help develop multifunctional applications for HSA probes and provide assistance in the early diagnosis and treatment of diseases.

Nanomaterials-assisted photothermal therapy for breast cancer: State-of-the-art advances and future perspectives

Breast cancer (BC) remains an enigmatic fatal modality ubiquitously prevalent in different parts of the world. Contemporary medicines face severe challenges in remediating and healing breast cancer. Due to its spatial specificity and nominal invasive therapeutic regime, photothermal therapy (PTT) has attracted much scientific attention down the lane. PTT utilizes a near-infrared (NIR) light source to irradiate the tumor target intravenously or non-invasively, which is converted into heat energy over an optical fibre. Dynamic progress in nanomaterial synthesis was achieved with specialized visual, physicochemical, biological, and pharmacological features to make up for the inadequacies and expand the horizon of PTT. Numerous nanomaterials have substantial NIR absorption and can function as efficient photothermal transducers. It is achievable to limit the wavelength range of an absorbance peak for specific nanomaterials by manipulating their synthesis, enhancing the precision and quality of PTT. Along the same lines, various nanomaterials are conjugated with a wide range of surface-modifying chemicals, including polymers and antibodies, which may modify the persistence of the nanomaterial and diminish toxicity concerns. In this article, we tend to put forth specific insights and fundamental conceptualizations on pre-existing PTT and its advances upon conjugation with different biocompatible nanomaterials working in synergy to combat breast cancer, encompassing several strategies like immunotherapy, chemotherapy, photodynamic therapy, and radiotherapy coupled with PTT. Additionally, the role or mechanisms of nanoparticles, as well as possible alternatives to PTT, are summarized as a distinctive integral aspect in this article.

Recent Progress and Prospect of Metal-Organic Framework-Based Nanozymes in Biomedical Application

A nanozyme is a nanoscale material having enzyme-like properties. It exhibits several superior properties, including low preparation cost, robust catalytic activity, and long-term storage at ambient temperatures. Moreover, high stability enables repetitive use in multiple catalytic reactions. Hence, it is considered a potential replacement for natural enzymes. Enormous research interest in nanozymes in the past two decades has made it imperative to look for better enzyme-mimicking materials for biomedical applications. Given this, research on metal-organic frameworks (MOFs) as a potential nanozyme material has gained momentum. MOFs are advanced hybrid materials made of inorganic metal ions and organic ligands. Their distinct composition, adaptable pore size, structural diversity, and ease in the tunability of physicochemical properties enable MOFs to mimic enzyme-like activities and act as promising nanozyme candidates. This review aims to discuss recent advances in the development of MOF-based nanozymes (MOF-NZs) and highlight their applications in the field of biomedicine. Firstly, different enzyme-mimetic activities exhibited by MOFs are discussed, and insights are given into various strategies to achieve them. Modification and functionalization strategies are deliberated to obtain MOF-NZs with enhanced catalytic activity. Subsequently, applications of MOF-NZs in the biosensing and therapeutics domain are discussed. Finally, the review is concluded by giving insights into the challenges encountered with MOF-NZs and possible directions to overcome them in the future. With this review, we aim to encourage consolidated efforts across enzyme engineering, nanotechnology, materials science, and biomedicine disciplines to inspire exciting innovations in this emerging yet promising field.

Aza-BODIPY-based polymeric nanoparticles for photothermal cancer therapy in a chicken egg tumor model

A new push-pull aza-BODIPY (AZB-CF3) derivative comprised of dimethylamino groups and trifluoromethyl moieties was successfully synthesized. This derivative exhibited broad absorption in the near-infrared region in the range from 798 to 832 nm. It also exhibited significant near-infrared (NIR) signals in low-polar solvents with emission peaks around 835-940 nm, while non-fluorescence in high-polar environments due to the twisted intramolecular charge transfer (TICT) phenomenon. The nanoprecipitation of this compound with phospholipid-based polyethylene glycol (DSPE-PEG) yielded AZB-CF3@DSPE-PEG nanoparticles (NPs) with a hydrodynamic size of 70 nm. The NPs exhibited good photostability, colloidal stability, biocompatibility, and excellent photothermal (PTT) competence with a conversion efficiency (η) of 44.9%. These NPs were evaluated in vitro and in ovo in a 4T1 breast cancer cell line for NIR light-trigger photothermal therapy. Proven in the chicken egg tumor model, AZB-CF3@DSPE-PEG NPs induced severe vascular damage (∼40% vascular destruction), showed great anticancer efficacy (∼75% tumor growth inhibition), and effectively inhibited distant metastasis via photothermal treatment. As such, this PTT-based nanocarrier system could be a potential candidate for a clinical cancer therapy approach.

Preparation and optimization of agarose or polyacrylamide/amino acid-based double network hydrogels for photocontrolled drug release

The high water content and biocompatibility of amino-acid-based supramolecular hydrogels have generated growing interest in drug delivery research. Nevertheless, the existing dominant approach of constructing such hydrogels, the exploitation of a single amino acid type, typically comes with several drawbacks such as weak mechanical properties and long gelation times, hindering their applications. Here, we design a near-infrared (NIR) light-responsive double network (DN) structure, containing amino acids and different synthetic or natural polymers, i.e., polyacrylamide, poly(N-isopropylacrylamide), agarose, or low-gelling agarose. The hydrogels displayed high mechanical strength and high drug-loading capacity. Adjusting the ratio of Fmoc-Tyr-OH/Fmoc-Tyr(Bzl)-OH or Fmoc-Phe-OH/Fmoc-Tyr(Bzl)-OH, we could drastically shorten the gelation time of the DN hydrogels at room and body temperatures. Moreover, introducing photothermal agents (graphene oxide, carbon nanotubes, molybdenum disulfide nanosheets, or indocyanine green), we equipped the hydrogels with NIR responsivity. We demonstrated the light-triggered release of the drug baclofen, which is used in severe spasticity treatment. Rheology and stability tests confirmed the positive impact of the polymers on the mechanical strength of the hydrogels, while maintaining good stability under physiological conditions. Overall, our study contributed a novel hydrogel formulation with high mechanical resistance, rapid gel formation, and efficient NIR-controlled drug release, offering new opportunities for biomedical applications.

The Alphabet of Nanostructured Polypyrrole

This review is devoted to polypyrrole and its morphology, which governs the electroactivity of the material. The macroscopic properties of the material are strictly relevant to microscopic ordering observed at the local level. During the synthesis, various (nano)morphologies can be produced. The formation of the ordered structure is dictated by the ability of the local forces and effects to induce restraints that help shape the structure. This review covers the aspects of morphology and roughness and their impact on the final properties of the modified electrode activity in selected applications.

Metal-Organic Frameworks Meet Polymers: From Synthesis Strategies to Healthcare Applications

Metal-organic frameworks (MOFs) have been at the forefront of nanotechnological research for the past decade owing to their high porosity, high surface area, diverse configurations, and controllable chemical structures. They are a rapidly developing class of nanomaterials that are predominantly applied in batteries, supercapacitors, electrocatalysis, photocatalysis, sensors, drug delivery, gas separation, adsorption, and storage. However, the limited functions and unsatisfactory performance of MOFs resulting from their low chemical and mechanical stability hamper further development. Hybridizing MOFs with polymers is an excellent solution to these problems, because polymers-which are soft, flexible, malleable, and processable-can induce unique properties in the hybrids based on those of the two disparate components while retaining their individuality. This review highlights recent advances in the preparation of MOF-polymer nanomaterials. Furthermore, several applications wherein the incorporation of polymers enhances the MOF performance are discussed, such as anticancer therapy, bacterial elimination, imaging, therapeutics, protection from oxidative stress and inflammation, and environmental remediation. Finally, insights from the focus of existing research and design principles for mitigating future challenges are presented.

A hierarchical porous aerohydrogel for enhanced water evaporation

Natural solar-powered steam generation provides a promising strategy to deal with deteriorating water resources. However, the practical applications of this strategy are limited by the tedious manufacturing of structures at micro-nano levels to concentrate heat and transport water to heat-localized regions. Herein, this work reports the fabrication of hierarchically porous aerohydrogel with enhanced light absorption and thermal localization at the air-solid interface. This aerohydrogel steam generator is fabricated by a simple yet controllable micropore generation approach to assemble air and hydrogel into hierarchically porous gas-solid hybrids. The tunable micropore size in a wide range from 99±49µm to 316±58μm not only enables contrasting sunlight absorptance (0.2 - 2.5µm) by reducing the reflection of solar light but also harnesses water transportation to the heating region via a capillary force-driven liquid flow. Therefore, a solar-vapor conversion efficiency of 91.3% under one sun irradiation was achieved using this aerohydrogel evaporator, reaching a ready evaporation rate of 2.76kg m-2 h-1 and 3.71kg m-2 h-1 under one and two sun irradiations, respectively. Our work provides a versatile and scalable approach to engineering porous hydrogels for highly efficient steam generation and opens an avenue for other potential practical applications based on this aerohydrogel.

Recent progress in tannic acid based approaches as a natural polyphenolic biomaterial for cancer therapy: A review

Significant advancements have been noticed in cancer therapy for decades. Despite this, there are still many critical challenges ahead, including multidrug resistance, drug instability, and side effects. To overcome obstacles of these problems, various types of materials in biomedical research have been explored. Chief among them, the applications of natural compounds have grown rapidly due to their superb biological activities. Natural compounds, especially polyphenolic compounds, play a positive and great role in cancer therapy. Tannic acid (TA), one of the most famous polyphenols, has attracted widespread attention in the field of cancer treatment with unique structural, physicochemical, pharmaceutical, anticancer, antiviral, antioxidant and other strong biological features. This review concentrated on the basic structure along with the important role of TA in tuning oncological signal pathways firstly, and then focused on the use of TA in chemotherapy and preparation of delivery systems including nanoparticles and hydrogels for cancer therapy. Besides, the application of TA/Fe3+ complex coating in photothermal therapy, chemodynamic therapy, combined therapy and theranostics is discussed.

Aggregation-induced type I&II photosensitivity and photodegradability-based molecular backbones for synergistic antibacterial and cancer phototherapy via photodynamic and photothermal therapies

The clinical applications of phototherapy nanomaterials are still limited due to concerns regarding their phototoxicity and efficacy. Herein, we report a novel type of D-π-A molecular backbone that induces type I/II photosensitivity and photodegradability by forming J-aggregates. The photodegradation rate can be regulated by changing the donor groups to regulate the photosensitivity of their aggregates because the photodegradability performance results from their oxidation by 1O2 generated by their type II photosensitivity. AID4 NPs possess faster photodegradation because of their better type I&II photosensitivity, which can also self-regulate by inhibiting type II and improving type I under hypoxic conditions. Moreover, they exhibited good photothermal and photoacoustic performance for improving their therapeutic effect by a synergistic effect and achieving photoacoustic imaging in vivo. The experimental result also showed that they can be effective for antibacterial and anti-tumor treatment and the photodegradation products of AID4 NPs possess low biological toxicity in the dark or under light. This study could provide a novel strategy for improving the safety and treatment effects of phototherapy.

Biosynthetic Melanin/Ce6-Based Photothermal and Sonodynamic Therapies Significantly Improved the Anti-Tumor Efficacy

Photothermal therapy (PTT) and sonodynamic therapy (SDT) are becoming promising therapeutic modalities against various tumors in recent years. However, the single therapeutic modality with SDT or PTT makes it difficult to achieve a satisfactory anti-tumor outcome due to their own inherent limitations, such as poor tissue penetration for the near-infrared (NIR) laser and the limited cytotoxic reactive oxygen species (ROS) generated from conventional sonosensitizers irradiated by ultrasound (US). Here, we successfully biosynthesized melanin with a controllable particle size with genetically engineered bacteria harboring a heat-inducible gene circuit. The biosynthetic melanin with 8 nm size and chlorin e6 (Ce6) was further encapsulated into liposomes and obtained SDT/PTT dual-functional liposomes (designated as MC@Lip). The resulting MC@Lip had an approximately 100 nm particle size, with 74.71% ± 0.54% of encapsulation efficiency for melanin and 94.52% ± 0.78% for Ce6. MC@Lip exhibited efficient 1O2 production and photothermal conversion capability upon receiving irradiation by US and NIR laser, producing significantly enhanced anti-tumor efficacy in vitro and in vivo. Especially, US and NIR laser irradiation of tumors received with MC@Lip lead to complete tumor regression in all tested tumor-bearing mice, indicating the great advantage of the combined use of SDT and PTT. More importantly, MC@Lip possessed good photoacoustic (PA) and fluorescence dual-modal imaging performance, making it possible to treat tumors under imaging guidance. Our study provides a novel approach to synthesize a melanin nanoparticle with controllable size and develops a promising combined SDT/PTT strategy to treat tumors.

The Beneficial Role of Photobiomodulation in Neurodegenerative Diseases

Photobiomodulation (PBM), also known as Low-level Laser Therapy (LLLT), involves the use of light from a laser or light-emitting diode (LED) in the treatment of various disorders and it has recently gained increasing interest. Progressive neuronal loss with attendant consequences such as cognitive and/or motor decline characterize neurodegenerative diseases. The available therapeutic drugs have only been able to provide symptomatic relief and may also present with some side effects, thus precluding their use in treatment. Recently, there has been an exponential increase in interest and attention in the use of PBM as a therapy in various neurodegenerative diseases in animal studies. Because of the financial and social burden of neurodegenerative diseases on the sufferers and the need for the discovery of potential therapeutic inventions in their management, it is pertinent to examine the beneficial effects of PBM and the various cellular mechanisms by which it modulates neural activity. Here, we highlight the various ways by which PBM may possess beneficial effects on neural activity and has been reported in various neurodegenerative conditions (Alzheimer's disease, Parkinson's disease, epilepsy, TBI, stroke) with the hope that it may serve as an alternative therapy in the management of neurodegenerative diseases because of the biological side effects associated with drugs currently used in the treatment of neurodegenerative diseases.

Fractionated Sonodynamic Therapy Using Gold@Poly(ortho-aminophenol) Nanoparticles and Multistep Low-Intensity Ultrasound Irradiation to Treat Melanoma Cancer: In Vitro and In Vivo Studies

OBJECTIVE

Cancer treatment using ultrasound irradiation with low intensities along with a sonosensitizer has been found to have significant advantages, such as high penetration depth in tissues, non-invasive therapeutic character, minor side effects, good patient adherence and preferential tumor area treatment. In the present study, gold nanoparticles covered by poly(ortho-aminophenol) (Au@POAP NPs) were synthesized and characterized as a new sonosensitizer.

METHODS

We investigated Au@POAP NPs efficacy on fractionated ultrasound irradiation for treatment of melanoma cancer in vitro as well as in vivo.

DISCUSSION

In vitro examinations revealed that although Au@POAP NPs (with a mean size of 9.8 nm) alone represented concentration-dependent cytotoxicity against the B16/F10 cell line, multistep ultrasound irradiation (1 MHz frequency, 1.0 W/cm² intensity, 60 s irradiation time) of the cells in the attendance of Au@POAP NPs led to efficient cell sonodynamic therapy (SDT) and death. Histological analyses revealed that in vivo fractionated SDT toward melanoma tumors of male balb/c mice led to no residual viable tumor cell after 10 d.

CONCLUSION

A deep sonosensitizing effectiveness of Au@POAP NPs on fractionated low-intensity ultrasound irradiation was attained with the main mechanism of tumor cell eradication of promotion of apoptosis or necrosis through dramatically increased reactive oxygen species levels.

Biosynthesis of Melanin Nanoparticles for Photoacoustic Imaging Guided Photothermal Therapy

Photothermal therapy (PTT) has attracted considerable attention in recent years due to their unique advantages in minimal invasiveness and spatiotemporal selectivity. However, the fabrication procedures of PTT agents frequently require complex chemical and/or physical methods that involves harsh and environmentally hazardous conditions. Here, a genetically engineered bacterium is developed to synthesize melanin nanoparticles under mild and environmentally friendly conditions. The biosynthetic melanin nanoparticles exhibit excellent biocompatibility, good stability, and negligible toxicity. In addition, the biosynthetic melanin nanoparticles have strong absorption at near-infrared (NIR) region and higher photothermal conversion efficiency (48.9%) than chemically synthesized melanin-like polydopamine nanoparticles under an 808 nm laser irradiation. Moreover, the results show that the biosynthetic melanin nanoparticles have excellent photoacoustic imaging (PAI) performance and can be used for PAI guided PTT in vivo. In conclusion, the study provides an alternative approach to synthesize PTT agents with broad application potential in the diagnosis and treatment of cancer.

PtSnBi Nanoplates Enable Photoacoustic Imaging-Guided Highly Efficient Photothermal Tumor Ablation

The development of photothermal agents (PTAs) with robust photostability and high photothermal conversion efficiency is of great importance for cancer photothermal therapy. Herein, a novel PTA was created using two-dimensional intermetallic PtSnBi nanoplates (NPs), which demonstrated excellent photostability and biocompatibility with a high photothermal conversion efficiency of ∼61 % after PEGylation. More importantly, PtSnBi NPs could be employed as photoacoustic imaging contrast agents for tumor visualization due to their strong absorbance in the NIR range. In addition, both in vitro and in vivo experiments confirmed that PtSnBi NPs had a good photothermal efficacy under NIR laser irradiation. Therefore, the remarkable therapeutic characteristics of PtSnBi NPs make them a most promising candidate for cancer theranostics.

Rational Design of Biomaterials to Potentiate Cancer Thermal Therapy

Cancer thermal therapy, also known as hyperthermia therapy, has long been exploited to eradicate mass lesions that are now defined as cancer. With the development of corresponding technologies and equipment, local hyperthermia therapies such as radiofrequency ablation, microwave ablation, and high-intensity focused ultrasound, have has been validated to effectively ablate tumors in modern clinical practice. However, they still face many shortcomings, including nonspecific damages to adjacent normal tissues and incomplete ablation particularly for large tumors, restricting their wide clinical usage. Attributed to their versatile physiochemical properties, biomaterials have been specially designed to potentiate local hyperthermia treatments according to their unique working principles. Meanwhile, biomaterial-based delivery systems are able to bridge hyperthermia therapies with other types of treatment strategies such as chemotherapy, radiotherapy and immunotherapy. Therefore, in this review, we discuss recent progress in the development of functional biomaterials to reinforce local hyperthermia by functioning as thermal sensitizers to endow more efficient tumor-localized thermal ablation and/or as delivery vehicles to synergize with other therapeutic modalities for combined cancer treatments. Thereafter, we provide a critical perspective on the further development of biomaterial-assisted local hyperthermia toward clinical applications.

Conductive polymers and composites-based systems: An incipient stride in drug delivery and therapeutics realm

Novel therapies and drug delivery systems (DDS) emphasis on localized, personalized, triggered, and regulated drug administration have heavily implicated electrically responsive DDS. An ideal DDS must deliver drugs to the target region at therapeutically effective concentrations to elicit a pharmacological response, resulting in better prophylaxis of the disease and the treatment. Biodegradable polymers are frequently employed for in-vivo long-term release; however, dose dumping can be anticipated. As a result, current DDSs can be tagged as dubbed "Smart Biomaterials" since they only focus on an on-demand cargo release in response to a trigger or stimulation. These organic materials have been recognized for their metal-like conductivity, as well as their mechanical stability and ease of production. These biomaterials can be programmed to respond to both internal and external stimuli. External pulsed triggers are required for extrinsic stimuli-responsive materials, whereas intrinsic stimuli-responsive materials rely on localized changes in the tissue environment. Furthermore, these materials have the ability to deliver active pharmaceutical agents at a varied concentration levels and across a broad spectrum of action. Drug delivery, biomedical implant technology, biosensor technology, and tissue engineering can be listed as a few prominent applications that have sparked immense interest for conductive polymers-based research and advancements in academia as well as in industry. This review comprehensively covers a cutting-edge collection of electrically conductive polymers and composites, and provide detailed insights of recent trends and advancements allied to conductive polymers for their potential applicability in an array of diverse meadows primarily focusing on drug delivery, biosensing and therapeutics. Furthermore, progressions in their synthesis, structural and functional properties have been presented in conjunction with futuristic directions for the smooth clinical translations.

Advances in photobiomodulation for cognitive improvement by near-infrared derived multiple strategies

Cognitive function is an important ability of the brain, but cognitive dysfunction can easily develop once the brain is injured in various neuropathological conditions or diseases. Photobiomodulation therapy is a type of noninvasive physical therapy that is gradually emerging in the field of neuroscience. Transcranial photobiomodulation has been commonly used to regulate neural activity in the superficial cortex. To stimulate deeper brain activity, advanced photobiomodulation techniques in conjunction with photosensitive nanoparticles have been developed. This review addresses the mechanisms of photobiomodulation on neurons and neural networks and discusses the advantages, disadvantages and potential applications of photobiomodulation alone or in combination with photosensitive nanoparticles. Photobiomodulation and its associated strategies may provide new breakthrough treatments for cognitive improvement.

Nanomaterials-Functionalized Hydrogels for the Treatment of Cutaneous Wounds

Hydrogels have been utilized extensively in the field of cutaneous wound treatment. The introduction of nanomaterials (NMs), which are a big category of materials with diverse functionalities, can endow the hydrogels with additional and multiple functions to meet the demand for a comprehensive performance in wound dressings. Therefore, NMs-functionalized hydrogels (NMFHs) as wound dressings have drawn intensive attention recently. Herein, an overview of reports about NMFHs for the treatment of cutaneous wounds in the past five years is provided. Firstly, fabrication strategies, which are mainly divided into physical embedding and chemical synthesis of the NMFHs, are summarized and illustrated. Then, functions of the NMFHs brought by the NMs are reviewed, including hemostasis, antimicrobial activity, conductivity, regulation of reactive oxygen species (ROS) level, and stimulus responsiveness (pH responsiveness, photo-responsiveness, and magnetic responsiveness). Finally, current challenges and future perspectives in this field are discussed with the hope of inspiring additional ideas.

Temperature- and pH-Responsive Polymeric Photocatalysts for Enhanced Control and Recovery

The emergence of heterogeneous photocatalysis has facilitated redox reactions with high efficiency, without compromising the recyclability of the photocatalyst. Recently, stimuli-responsive heterogeneous photocatalytic materials have emerged as a powerful synthetic tool, with simple and rapid recovery, as well as an enhanced dynamic control over reactions. Stimuli-responsive polymers are often inexpensive and easy to produce. They can be switched from an active "on" state to an inert "off" state in response to external stimuli, allowing the production of photocatalyst with adaptability, recyclability, and orthogonal control on different chemical reactions. Despite this versatility, the application of artificial smart material in the field of heterogeneous photocatalysis has not yet been maximized. In this Minireview, we will examine the recent developments of this emerging class of stimuli-responsive heterogeneous photocatalytic systems. We will discuss the synthesis route of appending photoactive components into different triggerable systems and, in particular, the controlled activation and recovery of the materials.

Combined Photothermal Therapy and Lycium barbarum Polysaccharide for Topical Administration to Improve the Efficacy of Doxorubicin in the Treatment of Breast Cancer

In order to improve the efficacy of doxorubicin in the treatment of breast cancer, we constructed a drug delivery system combined with local administration of Lycium barbarum polysaccharides (LBP) and photothermal-material polypyrrole nanoparticles (PPY NPs). In vitro cytotoxicity experiments showed that the inhibitory effect of DOX + LBP + PPY NPs on 4T1 cells under NIR (near infrared) laser was eight times that of DOX at the same concentration (64% vs. 8%). In vivo antitumor experiments showed that the tumor inhibition rate of LBP + DOX + PPY NPs + NIR reached 87.86%. The results of the H&E staining and biochemical assays showed that the systemic toxicity of LBP + DOX + PPY NPs + NIR group was reduced, and liver damage was significantly lower in the combined topical administration group (ALT 54 ± 14.44 vs. 28 ± 3.56; AST 158 ± 16.39 vs. 111 ± 20.85) (p < 0.05). The results of the Elisa assay showed that LBP + DOX + PPY NPs + NIR can enhance efficacy and reduce toxicity (IL-10, IFN-γ, TNF-α, IgA, ROS). In conclusion, LBP + DOX + PPY NPs combined with photothermal therapy can improve the therapeutic effect of DOX on breast cancer and reduce its toxic side effects.

Polypyrrole Nanomaterials: Structure, Preparation and Application

In the past decade, nanostructured polypyrrole (PPy) has been widely studied because of its many specific properties, which have obvious advantages over bulk-structured PPy. This review outlines the main structures, preparation methods, physicochemical properties, potential applications, and future prospects of PPy nanomaterials. The preparation approaches include the soft micellar template method, hard physical template method and templateless method. Due to their excellent electrical conductivity, biocompatibility, environmental stability and reversible redox properties, PPy nanomaterials have potential applications in the fields of energy storage, biomedicine, sensors, adsorption and impurity removal, electromagnetic shielding, and corrosion resistant. Finally, the current difficulties and future opportunities in this research area are discussed.

Targeted Wolfram-Doped Polypyrrole for Photonic Hyperthermia-Synergized Radiotherapy

Single ionizing radiation at a tolerable dose is ineffectual in eliminating malignancies but readily generates harmful effects on surrounding normal tissues. Herein, we intelligently fabricated novel wolfram-doped polypyrrole (WPPy) through a simple oxidative polymerization method with WCl₆ as an oxidizing catalyst, which possessed good biocompatibility, high photothermal conversion, and intensive radiosensitivity capacities to concurrently serve as a photothermal reagent and a radiosensitizer for hyperthermia-synergized radiotherapy (RT) against a malignant tumor. In comparison with traditional polypyrrole without noble metal doping, the innovative introduction of WCl₆ not only successfully launched the polymerization of a pyrrole monomer but also endowed WPPy with additional radiosensitization. More importantly, after further decoration with an active targeted component (SP94 polypeptide), the obtained WPPy@SP94 significantly increased tumor internalization and accumulation in vitro and in vivo and induced obvious DNA damage as well as robust ROS generation under X-ray irradiation, which meanwhile synergized with strong photonic hyperthermia to effectively inhibit tumor growth by single drug injection. Moreover, such biocompatible WPPy@SP94 showed negligible adverse effects on normal cells and tissues. WPPy@SP94 developed in this study not only expands the category of polypyrrole chemical syntheses but also sheds light on WPPy@SP94-based radiosensitizers for cancer RT.

Molecularly Targeted Photothermal Ablation of Epidermal Growth Factor Receptor-Expressing Cancer Cells with a Polypyrrole-Iron Oxide-Afatinib Nanocomposite

Simple Summary

In this manuscript, we describe the design and synthesis of a nanocomposite containing afatinib, polypyrrole, and iron oxide (PIA-NC) to molecularly target epidermal growth factor receptor (EGFR)-overexpressing cancer cells for photothermal conversion. In addition to physical and chemical characterization, we also showed that PIA-NC induces selective reactive oxygen species surge and apoptosis in response to sublethal near-infrared light only in EGFR-overexpressing cancer cells, not in EGFR-negative fibroblasts. The work demonstrates the feasibility of photothermal therapy with cellular precision.

Abstract

Near-infrared–photothermal therapy (NIR-PTT) is a potential modality for cancer treatment. Directing photothermal effects specifically to cancer cells may enhance the therapeutic index for the best treatment outcome. While epithelial growth factor receptor (EGFR) is commonly overexpressed/genetically altered in human malignancy, it remains unknown whether targeting EGFR with tyrosine kinase inhibitor (TKI)-conjugated nanoparticles may direct NIR-PTT to cancers with cellular precision. In the present study, we tested this possibility through the fabrication of a polypyrrole–iron oxide–afatinib nanocomposite (PIA-NC). In the PIA-NC, a biocompatible and photothermally conductive polymer (polypyrrole) was conjugated to a TKI (afatinib) that binds to overexpressed wild-type EGFR without overt cytotoxicity. A Fenton catalyst (iron oxide) was further encapsulated in the NC to drive the intracellular ROS surge upon heat activation. Diverse physical and chemical characterization experiments were conducted. Particle internalization, cytotoxicity, ROS production, and apoptosis in EGFR-positive and -negative cell lines were investigated in the presence and absence of NIR. We found that the PIA-NCs were stable with a size of 243 nm and a zeta potential of +35 mV. These PIA-NCs were readily internalized close to the cell membrane by all types of cells used in the study. The Fourier transform infrared spectra showed 3295 cm⁻¹ peaks; substantial O–H stretching was seen, with significant C=C stretching at 1637 cm⁻¹; and a modest appearance of C–O–H bending at 1444 cm⁻¹ confirmed the chemical conjugation of afatinib but not iron oxide to the NC. At a NIR-PTT energy level that has a minimal cytotoxic effect, PIA-NC significantly sensitizes EGFR-overexpressing A549 lung cancer cells to NIR-PTT-induced cytotoxicity at a rate of 70%, but in EGFR-negative 3T3 fibroblasts the rate was 30%. Within 1 min of NIR-PTT, a surge of intracellular ROS was found in PIA-NC-treated A549 cells. This was followed by early induction of cellular apoptosis for 54 ± 0.081% of A549 cells. The number of viable cells was less than a quarter of a percent. Viability levels of A549 cells that had been treated with NIR or PIA were only 50 ± 0.216% and 80 ± 0.216%, respectively. Only 10 ± 0.816% of NIH3T3 cells had undergone necrosis, meaning that 90 ± 0.124% were alive. Viability levels were 65 ± 0.081% and 81 ± 0.2%, respectively, when only NIR and PIA were used. PIA binding was effective against A549 cells but not against NIH3T3 cells. The outcome revealed that higher levels of NC + NIR exposure caused cancer cells to produce more ROS. In summary, our findings proved that a molecularly targeted NC provides an orchestrated platform for cancer cell-specific delivery of NIR-PTT. The geometric proximity design indicates a novel approach to minimizing the off-target biological effects of NIR-PTT. The potential of PIA-NC to be further developed into real-world application warrants further investigation.

Polyoxometalate-based nanocomposites for antitumor and antibacterial applications

Polyoxometalates (POMs), as emerging inorganic metal oxides, have been shown to have significant biological activity and great medicinal value. Nowadays, biologically active POM-based organic-inorganic hybrid materials have become the next generation of antibacterial and anticancer drugs because of their customizable molecular structures related to their highly enhanced antitumor activity and reduced toxicity to healthy cells. In this review, the current developed strategies with POM-based materials for the purpose of antibacterial and anticancer activities from different action principles inducing cell death and hyperpolarization, cell plasma membrane destruction, interference with bacterial respiratory chain and inhibiting bacterial growth are overviewed. Moreover, specific interactions between POM-based materials and biomolecules are highlighted for a better understanding of their antibacterial and anticancer mechanisms. POMs have great promise as next-generation antibacterial and anticancer drugs, and this review will provide a valuable systematic reference for the further development of POM-based nanomaterials.

Hyaluronic acid-based nano drug delivery systems for breast cancer treatment: Recent advances

Breast cancer (BC) is the most common malignancy among females worldwide, and high resistance to drugs and metastasis rates are the leading causes of death in BC patients. Releasing anti-cancer drugs precisely to the tumor site can improve the efficacy and reduce the side effects on the body. Natural polymers are attracting extensive interest as drug carriers in treating breast cancer. Hyaluronic acid (HA) is a natural polysaccharide with excellent biocompatibility, biodegradability, and non-immunogenicity and is a significant component of the extracellular matrix. The CD44 receptor of HA is overexpressed in breast cancer cells and can be targeted to breast tumors. Therefore, many researchers have developed nano drug delivery systems (NDDS) based on the CD44 receptor tumor-targeting properties of HA. This review examines the application of HA in NDDSs for breast cancer in recent years. Based on the structural composition of NDDSs, they are divided into HA NDDSs, Modified HA NDDSs, and HA hybrid NDDSs.

Near-Infrared Responsive Synergistic Chemo-Phototherapy from Surface-Functionalized Poly(ε-caprolactone)-Poly(d,l-lactic-co-glycolic acid) Composite Nanofibers for Postsurgical Cancer Treatment

The combination of hyperthermia and chemotherapy has attracted significant attention in local cancer treatment following surgical resection. Pyrrole is a potent photothermal agent that can induce a temperature rise at different concentrations in the surrounding medium by absorbing near-infrared radiation (NIR). In this study, poly(ε-caprolactone) (PCL) and poly (d,l-lactic-co-glycolic acid) (PLGA) were used to make nanofibers using the electrospinning process. Then, pyrrole in different concentrations of (0.2, 0.4, and 0.6) M was attached to the surface of PCL-PLGA fiber mats by in situ polymerization, which was confirmed by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD) analysis. A concentration-dependent local temperature rise was observed using a FLIR camera under near-infrared (NIR) laser irradiation. For the hyperthermia effect, pyrrole concentration (0.06 M) was used for in vitro drug release studies and cell viability assays because under NIR irradiation (2 W/cm², 3 min), it increased the local temperature to around 45 °C. In vitro drug release studies confirmed that NIR irradiation increased the diffusion rate of doxorubicin (DOX) by increasing the environmental temperature above the glass transition temperature of PLGA. In vitro cytotoxicity experiments further confirmed that PCL-PLGA-DOX/PPy fiber mats showed an enhanced inhibitory effect against CT26 and MCF7 cells by the combination of hyperthermia and chemotherapy.

Recent advances in erythrocyte membrane-camouflaged nanoparticles for the delivery of anti-cancer therapeutics

INTRODUCTION

Red blood cell (or erythrocyte) membrane-camouflaged nanoparticles (RBC-NPs) not only have a superior circulation life and do not induce accelerated blood clearance, but also possess special functions, which offers great potential in cancer therapy.

AREAS COVERED

This review focuses on the recent advances of RBC-NPs for delivering various agents to treat cancers in light of their vital role in improving drug delivery. Meanwhile, the construction and in vivo behavior of RBC-NPs are discussed to provide an in-depth understanding of the basis of RBC-NPs for improved cancer drug delivery.

EXPERT OPINION

Although RBC-NPs are quite prospective in delivering anti-cancer therapeutics, they are still in their infancy stage and many challenges need to be overcome for successful translation into the clinic. The preparation and modification of RBC membranes, the optimization of coating methods, the scale-up production and the quality control of RBC-NPs, and the drug loading and release should be carefully considered in the clinical translation of RBC-NPs for cancer therapy.

Spatiotemporal Temperature Distribution of NIR Irradiated Polypyrrole Nanoparticles and Effects of pH

The spatiotemporal temperature distributions of NIR irradiated polypyrrole nanoparticles (PPN) were evaluated by varying PPN concentrations and the pH of suspensions. The PPN were synthesized by oxidative chemical polymerization, resulting in a hydrodynamic diameter of 98 ± 2 nm, which is maintained in the pH range of 4.2–10; while the zeta potential is significantly affected, decreasing from 20 ± 2 mV to −5 ± 1 mV at the same pH range. The temperature profiles of PPN suspensions were obtained using a NIR laser beam (1.5 W centered at 808 nm). These results were analyzed with a three-dimensional predictive unsteady-state heat transfer model that considers heat conduction, photothermal heating from laser irradiation, and heat generation due to the water absorption. The temperature profiles of PPN under laser irradiation are concentration-dependent, while the pH increase only induces a slight reduction in the temperature profiles. The model predicts a value of photothermal transduction efficiency (η) of 0.68 for the PPN. Furthermore, a linear dependency was found for the overall heat transfer coefficient (U) and η with the suspension temperature and pH, respectively. Finally, the model developed in this work could help identify the exposure time and concentration doses for different tissues and cells (pH-dependent) in photothermal applications.

Polypyrrole Nanoenzymes as Tumor Microenvironment Modulators to Reprogram Macrophage and Potentiate Immunotherapy

Nanozyme-based tumor catalytic therapy has attracted widespread attention in recent years, but its therapeutic outcome is drastically diminished by species of nanozyme, concentration of substrate, pH value, and reaction temperature, etc. Herein, a novel Cu-doped polypyrrole nanozyme (CuP) with trienzyme-like activities, including catalase (CAT), glutathione peroxidase (GPx), and peroxidase (POD), is first proposed by a straightforward one-step procedure, which can specifically promote O₂ and ·OH elevation but glutathione (GSH) reduction in tumor microenvironment (TME), causing irreversible oxidative stress damage to tumor cells and reversing the redox balance. The PEGylated CuP nanozyme (CuPP) has been demonstrated to efficiently reverse immunosuppressive TME by overcoming tumor hypoxia and re-educating macrophage from pro-tumoral M2 to anti-tumoral M1 phenotype. More importantly, CuPP exhibits hyperthermia-enhanced enzyme-mimic catalytic and immunoregulatory activities, which results in intense immune responses and almost complete tumor inhibition by further combining with αPD-L1. This work opens intriguing perspectives not only in enzyme-catalytic nanomedicine but also in macrophage-based tumor immunotherapy.

Minimally invasive nanomedicine: nanotechnology in photo-/ultrasound-/radiation-/magnetism-mediated therapy and imaging

Traditional treatments such as chemotherapy and surgery usually cause severe side effects and excruciating pain. The emergence of nanomedicines and minimally invasive therapies (MITs) has brought hope to patients with malignant diseases. Especially, minimally invasive nanomedicines (MINs), which combine the advantages of nanomedicines and MITs, can effectively target pathological cells/tissues/organs to improve the bioavailability of drugs, minimize side effects and achieve painless treatment with a small incision or no incision, thereby acquiring good therapeutic effects. In this review, we provide a comprehensive review of the research status and challenges of MINs, which generally refers to the medical applications of nanotechnology in photo-/ultrasound-/radiation-/magnetism-mediated therapy and imaging. Additionally, we also discuss their combined application in various fields including cancers, cardiovascular diseases, tissue engineering, neuro-functional diseases, and infectious diseases. The prospects, and potential bench-to-bedside translation of MINs are also presented in this review. We expect that this review can inspire the broad interest for a wide range of readers working in the fields of interdisciplinary subjects including (but not limited to) chemistry, nanomedicine, bioengineering, nanotechnology, materials science, pharmacology, and biomedicine.

Methotrexate-Transferrin-Functionalized Fe(Salen)-Polypyrrole Nanocomposites for Targeted Photo-/Magneto-Thermal Cancer Treatments

Designing multi-modal topical drug delivery nanocarriers using nano-hybrid particles has received significant interest in targeted cancer therapy. In this study, magnetic Fe(salen)-conducting copolymer nanocomposites based on our previous iron salt-free synthesis method are surface-functionalized with methotrexate and transferrin proteins. The nano-hybrids show near-infrared-/magnetic field-responsive hyperthermal activity in vitro, which can be extraordinarily useful in magnetically guidable local cancer targeting as a versatile multi-modal therapeutic drug delivery system.

Graphitic-N-doped graphene quantum dots for photothermal eradication of multidrug-resistant bacteria in the second near-infrared window

Developing efficient therapeutic strategies for combating bacterial infection remains a challenge owing to the indiscriminate utilization of antibiotics and the prevalence of multidrug-resistant (MDR) bacteria. Herein, highly graphitic-N-doped graphene quantum dots (N-GQDs) with efficient NIR-II photothermal conversion properties were synthesized for the first time for photothermal antibacterial therapy. The obtained N-GQDs exhibited strong NIR absorption ranging from 700 to 1200 nm, achieving high photothermal conversion efficiency of 77.8% and 50.4% at 808 and 1064 nm, respectively. Outstanding antibacterial and antibiofilm activities against MDR bacteria (methicillin-resistant Staphylococcus aureus, MRSA) were achieved by the N-GQDs in the presence of an 808 or 1064 nm laser. In vivo investigations verified that the generation of hyperthermia by N-GQDs plus a NIR-II laser can combat MDR bacterial infections and thus significantly accelerate wound healing. Our work provides a novel carbon-based nanomaterial as a photothermal antibacterial agent for efficiently avoiding bacterial resistance and fighting MDR bacterial infections.

Advances in the Novel Nanotechnology for the Targeted Tumor Therapy by the Transdermal Drug Delivery

Despite modern medicine advances greatly, cancer remains a serious challenge to world health for which effective methods of treatment have hardly been developed yet. However, throughout the recent years, the rapid-developing nanotechnology has provided a new outlook of cancer therapy by transdermal drug delivery. By disrupting the stratum corneum, drugs are delivered through the skin and navigated to the tumor site by drug delivery systems such as nanogels, microneedles, etc. The superiorities include the improvement of drug pharmacokinetics as well as reduced side effects. This paper reviews the reported novel development of transdermal drug delivery systems for targeted cancer therapy. Advanced techniques for penetrating the skin will be discussed as well.

Recent Development of MOF-Based Photothermal Agent for Tumor Ablation

Metal-organic frameworks (MOFs) are 3D-architecture compounds of metal ions and organic molecules with sufficient and permanent porosity, showing great potential as a versatile platform to load various functional moieties to endow the hybrid materials with specific applications. Currently, a variety of photothermal nanometals have been embedded into organic ligands for integrating the unique photothermal effects with the merits of MOFs to improve their performances for cancer therapy. In this review, we have summarized a series of novel MOF-based photothermal materials for this unique therapeutic modality against tumors from three main aspects according to their chemical compositions and structures, i) metal-doped MOF, ii) organic-doped MOF, and iii) polymer-coated MOF. In addition, we have summarized the latest developments and characteristics of MOF-based photothermal agents, such as good biocompatibility, low toxicity, and responsive photothermal conversion without destroying the structure of hybrid photothermal agent. At last, we addressed the future perspectives of MOF-based photothermal agent in the field of phototherapy.

Polypyrrole-Gold nanocomposites as a promising photothermal agent: Preparation, characterization and cytotoxicity study

Photothermal nanomaterials with near-infrared absorption and high energy conversion efficiency have recently attracted significant interest. Polypyrrole-gold nanocomposites (PPy-Au NCs) as photothermal nanoagents are synthesized using ex-situ polymerization method of the modified pyrrole monomers. Microscopic and spectroscopic characterization techniques are used to reveal the surface structure, composition variation and photoelectric properties of PPy-Au NCs, gold nanorods (Au NRs) and polypyyrole nanoparticles (PPy NPs). Their cytotoxic effects on the viability of Ehrlich Ascites Carcinoma cells in the dark are demonstrated. The surface coating of Au NRs with PPy NPs shows an enhancement in the photothermal efficiency of the proposed photothermal nanoagent. The photothermal conversion of nanomaterials are examined using polarized polychromatic incoherent low-energy light source (the energy density of the light is 2.4 J/cm² per minute and the specific power density is 40 mW/cm²).

Preparation and synergistic chemo-photothermal therapy of redox-responsive carboxymethyl cellulose/chitosan complex nanoparticles

Chemo-photothermal combination therapy has great promise for enhanced tumor treatment. Hereby, we developed a complex nanoparticle using electrostatic absorption method, in which the inner chitosan (CS) NPs loaded polypyrrole (PPy) nanoparticles and 5-fluorouracil (5Fu), the outer shell was carboxymethyl cellulose (CMC) crosslinked with disulfide. The drug loaded polysaccharide complex nanoparticles displayed good photothermal effects, and the drug release would be triggered by multi-model response of NIR irradiation, high glutathione (GSH) and weak acidity in tumor environment. In vitro biological studies indicated the nanopartiles could be effectively internalized by HepG2 cancer cells. Moreover, the remarkable inhibition of the CMC complex PPy and 5Fu loaded CS nanoparticles (CMC/CS@PPy + 5Fu NPs) against tumor growth was achieved in HepG2-bearing mice model, suggesting its great potential for synergetic chemo-photothermal therapy.

A polypyrrole-mediated photothermal biosensor with a temperature and pressure dual readout for the detection of protein biomarkers

A novel photothermal biosensor with a temperature and pressure dual readout was developed for CRP detection. The in situ synthesized polypyrrole exhibits photothermal effect under NIR light to increase temperature and pressure for portable readout.