Self-assembly of graphene oxide at interfaces

Droplet-Pen Writing of Ultra-Uniform Graphene Pattern for Multi-Spectral Applications

Artificial optical patterns bring wide benefits in applications like structural color display, photonic camouflage, and electromagnetic cloak. Their scalable coating on large-scale objects will greatly enrich the multimodal-interactive society. Here, a droplet-pen writing (DPW) method to directly write multi-spectral patterns of thin-film graphene is reported. By amphiphilicity regulations of 2D graphene nanosheets, ultra-uniform and ultrathin films can spontaneously form on droplet caps and pave to the substrate, thus inducing optical interference. This allows the on-surface patterning by pen writing of droplets. Specifically, drop-on-demand thin films are achieved with millimeter lateral size and uniformity up to 97% in subwavelength thickness (<100 nm), corresponding to an aspect ratio of over 30 000. The pixelated thin-film patterns of disks and lines in an 8-inch wafer scale are demonstrated, which enable low-emittance structural color paintings. Furthermore, the applications of these patterns for dual-band camouflage and infrared-to-visible encryption are investigated. This study highlights the potential of 2D material self-assembly in the large-scale preparation and multi-spectral application of thin film-based optical patterns.

Direct-Write Printed Slippery Surface for Assembling a High-Quality Graphene Structure and Its Application in Flexible Electric Actuators

Graphene is a two-dimensional honeycomb-like nanomaterial generated by carbon atoms in sp2 hybridized orbitals to form a hexagonal lattice structure with excellent electrical, optical, and mechanical properties. The solution process method has been widely used to realize large-area patterned graphene structures for high-performance devices. In the method, graphene usually needs to be dispersed in solution, and the π-π bonding gravitational interactions between graphene sheets would lead to uncontrollable structures in solution and difficulty in obtaining high performance. In this work, a patterned graphene oxide (GO) structure with controllable thickness and layer spacing was realized by a direct-write printed slippery surface, which was used as a slippery limited template. After reducing GO into reduced graphene oxide (rGO), a flexible electric pattern with a conductivity of up to 6.425 × 103 S/m was realized. Furthermore, the patterned rGO structure was transferred on polydimethylsiloxane (PDMS), which could generate less than a 5% change in resistance after 10,000 consecutive bends, and an anisotropic expansion based on rGO and PDMS materials under electro-thermal coupling. The patterned rGO structures could meet the performance requirements of highly sensitive and complex deformation applications as flexible electric actuators. This study provides great research significance and application value for patterning high-quality graphene structures and realizing high-performance flexible electronic devices.

Amphiphilic Covalent Organic Framework Nanoparticles for Pickering Emulsion Catalysis with Size Selectivity

Exploiting advanced amphiphilic solid catalysts is crucial to the development of Pickering emulsion catalysis. Herein, covalent organic framework (COF) nanoparticles constructed with highly hydrophobic monomers as linkers were found to show superior amphiphilicity and they were then developed as a new class of solid emulsifiers for Pickering emulsion catalysis. Employing amphiphilic COFs as solid emulsifiers, Pickering emulsions with controllable emulsion type and droplet sizes were obtained. COF materials have also been demonstrated to serve as porous surface coatings to replace traditional surface modifications for stabilizing Pickering emulsions. After implanting Pd nanoparticles into amphiphilic COFs, the obtained catalyst displayed a 3.9 times higher catalytic efficiency than traditional amphiphilic solid catalysts with surface modifications in the biphasic oxidation reaction of alcohols. Such an enhanced activity was resulted from the high surface area and regular porous structure of COFs. More importantly, because of their tunable pore diameters, Pickering emulsion catalysis with remarkable size selectivity was achieved. This work is the first example that COFs were applied in Pickering emulsion catalysis, providing a platform for exploring new frontiers of Pickering emulsion catalysis.

Interfacial Assembly of 2D Graphene-Derived Ion Channels for Water-Based Green Energy Conversion

The utilization of sustained and green energy is believed to alleviate increasing menace of global environmental concerns and energy dilemma. Interfacial assembly of 2D graphene-derived ion channels (2D-GDICs) with tunable ion/fluid transport behavior enables efficient harvesting of renewable green energy from ubiquitous water, especially for osmotic energy harvesting. In this review, various interfacial assembly strategies for fabricating diverse 2D-GDICs are summarized and their ion transport properties are discussed. This review analyzes how particular structure and charge density/distribution of 2D-GDIC can be modulated to minimize internal resistance of ion/fluid transport and enhance energy conversion efficiency, and highlights stimuli-responsive functions and stability of 2D-GDIC and further examines the possibility of integrating 2D-GDIC with other energy conversion systems. Notably, the presented preparation and applications of 2D-GDIC also inspire and guide other 2D materials to fabricate sophisticated ion channels for targeted applications. Finally, potential challenges in this field is analyzed and a prospect to future developments toward high-performance or large-scale real-word applications is offered.

An effective method for fabricating crosslinked multilayer biomembranes with excellent stability and methanol resistance

To develop the proton exchange membranes with excellent comprehensive performance, especially high methanol resistance, the multilayer biomembranes were first prepared by alternately depositing chitosan and self-made functionalized organosilane on the surface of crosslinked chitosan via layer-by-layer self-assembly and were further treated via immersing in sulfuric acid and then heating at high temperature. SEM and FTIR spectra confirmed the presence of thin self-assemble layers with good adhesion on the substrate due to the interactions and the condensation reaction. The introduction of self-assemble layers and crosslinked structure significantly improved the stability and methanol resistance of biomembrane. The methanol diffusion coefficient of 15 bilayers modified biomembrane was only 2.6 × 10-8 cm2 S-1 in 12 M methanol, which was very favorable for its application in direct methanol fuel cell with high methanol concentration. Furthermore, the crosslinked multilayer biomembranes exhibited enhanced stability and the functionalized organosilane with high conductive groups ensured the biomembranes with better proton conductivity. The biomembrane with 15 bilayers showed extremely high selectivity value (1.05 × 106 Sscm-3), indicating its attractive potential as proton exchange membrane in direct methanol fuel cell.

Scalable microfluidic fabrication of vertically aligned two-dimensional nanosheets for superior thermal management

Two-dimensional (2D) nanosheets have been assembled into various macroscopic structures for wide engineering applications. To fully explore their exceptional thermal, mechanical, and electrical properties, 2D nanosheets must be aligned into highly ordered structures due to their strong structural anisotropy. Structures stacked layer by layer such as films and fibers have been readily assembled from 2D nanosheets due to their planar geometry. However, scalable manufacturing of macroscopic structures with vertically aligned 2D nanosheets remains challenging, given their large lateral size with a thickness of only a few nanometers. Herein, we report a scalable and efficient microfluidics-enabled sheet-aligning process to assemble 2D nanosheets into a large-area film with a highly ordered vertical alignment. By applying microchannels with a high aspect ratio, 2D nanosheets were well aligned vertically under strong channel size confinement and high flow shear stress. A vertically aligned graphene sheet film was obtained and applied to effectively improve the heat transfer of thermal interfacial materials (TIMs). Superior through-plane thermal conductivity of 82.7 W m-1 K-1 at a low graphene content of 11.8 vol% was measured for vertically aligned TIMs. Thus, they demonstrate exceptional thermal management performance for switching power supplies with high reliability.

NOx Sensor Constructed from Conductive Metal-Organic Framework and Graphene for Airway Inflammation Screening

The detection of nitric oxide in human exhaled breath (EB) has received wide attention due to its close relationship with respiratory tract inflammation. Herein, a ppb-level NOx chemiresistive sensor was prepared by assembling graphene oxide (GO) with a conductive π-d conjugated metal-organic framework Co3(HITP)2 (HITP = 2,3,6,7,10,11-hexaiminotriphenylene) in the presence of poly(dimethyldiallylammonium chloride) (PDDA). The construction of a gas sensor chip was achieved by drop-casting the GO/PDDA/Co3(HITP)2 composite onto ITO-PET interdigital electrodes, followed by in situ reduction of GO to reduced graphene oxide (rGO) in hydrazine hydrate vapor. Compared with bare rGO, the nanocomposite shows significantly improved sensitivity and selectivity for NOx among various gas analytes owing to its folded and porous structure as well as its numerous active sites. The limit of detection (LOD) for NO and NO2 can reach as low as 11.2 and 6.8 ppb, respectively, and the response/recovery time to 200 ppb NO is 24/41 s. These results indicate that rGO/PDDA/Co3(HITP)2 can achieve a sensitive and fast response toward NOx at room temperature (RT). Additionally, good repeatability and long-term stability were observed. Furthermore, the sensor shows improved humidity tolerance owing to the presence of hydrophobic benzene rings in Co3(HITP)2. To demonstrate its ability in EB detection, EB samples collected from healthy individuals were spiked with a certain amount of NO to simulate the EB of respiratory inflammatory patients. The sensor can successfully distinguish healthy people from the simulated patients. Furthermore, in real clinical sample detection, the sensor can further differentiate acute respiratory inflammatory patients from the chronic ones.

Supramolecular temperature responsive assembly of polydopamine reduced graphene oxide

Graphene oxide (GO) and reduced graphene oxide (rGO) colloidal systems can directly respond to environmental stimuli such as pH, ionic strength, and light by themselves, but not to temperature. Here we show that surface modification of rGO with polydopamine (PDA) leads to a temperature-responsive composite material, even though neither rGO nor PDA have intrinsic temperature responsiveness. Reducing GO with dopamine results in rGO/PDA flakes with hydrophilic PDA clusters attached to hydrophobic rGO domains, which mimics the amphiphilic structure of temperature responsive poly(N-isopropylacrylamide) (PNIPAM). The rGO/PDA flakes self-assemble at temperature higher than 30 °C, causing flake aggregation and precipitation in suspensions with concentration of 0.05 g L^-1, which is reversible upon cooling, shaking, and re-heating. A solution-to-gelation transition occurs upon heating suspensions with concentration of 10 g L^-1. Nacre-like films and porous monoliths are obtained by drying rGO/PDA suspensions at different concentrations. Films and porous monoliths obtained by drying suspensions that are previously self-assembled through heat have more compact structures compared to those obtained with suspensions that are not heated. Overall, this work introduces the concept of supramolecular temperature responsive assembly of nanomaterials (STRAN), i.e., that temperature response can be introduced in nanomaterials by combining non-responsive components that function cooperatively in supramolecules, whose interactions with solvents can be modulated by temperature changes, mimicking what happens in macromolecular systems such as PNIPAM. STRAN could be applied to nanomaterials beyond GO to develop responsive systems whose self-assembly in suspension and architectural features realized upon drying can be controlled by temperature.

Preparation of graphene oxide-stabilized Pickering emulsion adjuvant for Pgp3 recombinant vaccine and enhanced immunoprotection against Chlamydia Trachomatis infection

Background

Traditional emulsion adjuvants are limited in clinical application because of their surfactant dependence. Graphene oxide (GO) has unique amphiphilic properties and therefore has potential to be used as a surfactant substitute to stabilize Pickering emulsions.

Methods

In this study, GO-stabilized Pickering emulsion (GPE) was prepared and used as an adjuvant to facilitate an enhanced immune response to the Chlamydia trachomatis (Ct) Pgp3 recombinant vaccine. Firstly, GPE was prepared by optimizing the sonication conditions, pH, salinity, GO concentration, and water/oil ratio. GPE with small-size droplets was characterized and chosen as the candidate. Subsequently, controlled-release antigen delivery by GPE was explored. Cellular uptake behaviors, M1 polarization, and cytokine stimulation by GPE + Pgp3 was considered in terms of the production of macrophages. Finally, GPE's adjuvant effect was evaluated by vaccination with Pgp3 recombinant in BALB/c mouse models.

Results

GPE with the smallest droplet sizes was prepared by sonication under 163 W for 2 min at 1 mg/mL GO in natural salinity with a pH of 2 when the water/oil ratio was 10:1 (w/w). The optimized average GPE droplet size was 1.8 μm and the zeta potential was -25.0 ± 1.3 mv. GPE delivered antigens by adsorption onto the droplet surface, demonstrating the controlled release of antigens both in vitro and in vivo. In addition, GPE promoted antigen uptake, which stimulated proinflammatory tumor necrosis factor alpha (TNF-α), enhancing the M1 polarization of macrophages in vitro. Macrophage recruitment was also significantly promoted by GPE at the injection site. In the GPE + Pgp3 treatment group, higher levels of immunoglobin (IgG), immunoglobin G1 (IgG1), immunoglobin G2a (IgG2a) sera, and immunoglobin A (IgA) were detected in vaginal fluid, and higher levels of IFN-γ and IL-2 secretion were stimulated, than in the Pgp3 group, showing a significant type 1 T helper (Th1)-type cellular immune response. Chlamydia muridarum challenging showed that GPE enhanced Pgp3's immunoprotection through its advanced clearance of bacterial burden and alleviation of chronic pathological damage in the genital tract.

Conclusion

This study enabled the rational design of small-size GPE, shedding light on antigen adsorption and control release, macrophage uptake, polarization and recruitment, which enhanced augmented humoral and cellular immunity and ameliorated chlamydial-induced tissue damage in the genital tract.

Graphene oxide exposure alters gut microbial community composition and metabolism in an in vitro human model

Graphene oxide (GO) nanomaterials have unique physicochemical properties that make them highly promising for biomedical, environmental, and agricultural applications. There is growing interest in the use of GO and extensive in vitro and in vivo studies have been conducted to assess its nanotoxicity. Although it is known that GO can alter the composition of the gut microbiota in mice and zebrafish, studies on the potential impacts of GO on the human gut microbiome are largely lacking. This study addresses an important knowledge gap by investigating the impact of GO exposure- at low (25 mg/L) and high (250 mg/L) doses under both fed (nutrient rich) and fasted (nutrient deplete) conditions- on the gut microbial communitys' structure and function, using an in vitro model. This model includes simulated oral, gastric, small intestinal phase digestion of GO followed by incubation in a colon bioreactor. 16S rRNA amplicon sequencing revealed that GO exposure resulted in a restructuring of community composition. 25 mg/L GO induced a marked decrease in the Bacteroidota phylum and increased the ratio of Firmicutes to Bacteroidota (F/B). Untargeted metabolomics on the supernatants indicated that 25 mg/L GO impaired microbial utilization and metabolism of substrates (amino acids, carbohydrate metabolites) and reduced production of beneficial microbial metabolites such as 5-hydroxyindole-3-acetic acid and GABA. Exposure to 250 mg/L GO resulted in community composition and metabolome profiles that were very similar to the controls that lacked both GO and digestive enzymes. Differential abundance analyses revealed that 3 genera from the phylum Bacteroidota (Bacteroides, Dysgonomonas, and Parabacteroides) were more abundant after 250 mg/L GO exposure, irrespective of feed state. Integrative correlation network analysis indicated that the phylum Bacteroidota showed strong positive correlations to multiple microbial metabolites including GABA and 3-indoleacetic acid, are much larger number of correlations compared to other phyla. These results show that GO exposure has a significant impact on gut microbial community composition and metabolism at both low and high GO concentrations.

Novel use of graphene oxide quantum dots in a pickering emulsion as a Chlamydia trachomatis vaccine adjuvant

Graphene oxide quantum dots (GOQDs), which are graphene-based nanoparticles, are potential surfactant substitutes for stabilizing Pickering emulsions, due to their high surface area, biodegradability, and reasonable biocompatibility. In the present study, GOQDs stabilized Pickering emulsion (GQPE) was prepared by simple sonication and then used as an adjuvant to enhance immune responses to the Chlamydia trachomatis Pgp3 recombinant vaccine. Immunization of mice showed that GQPE robustly activates adaptive immunity by efficiently stimulating IgG, sIgA, IFN-γ, IL-4, and TNF-α production. Controlled release repository of antigens both in vivo and in vitro prolonged the immune response. In addition, GQPE enhanced dendritic cell recruitment at the injection site, ensuring rapid and efficient innate immunity. Safety assessment revealed that GQPE does not cause liver, kidney, and myocardial damage in mice, suggesting its favorable biocompatibility. This study provides evidence for the use of GOPE as a facile, effective, and safe strategy to enhance the immune response to Pgp3 recombinant vaccines.

pH-Switchable Pickering miniemulsion enabled by carbon quantum dots for quasi-homogenized biphasic catalytic system

A quasi-homogenized miniemulsion system enabled by carbon quantum dot solid nanoparticles for biphasic catalysis is proposed, which breaks existing limits for an immiscibly biphasic system and overcomes issues for large-sized solid particle-stabilized emulsion droplets. The presented Pickering miniemulsion features pH-responsive behavior, finally triggering facile product separation and catalyst recycling in one reaction vessel.

Insights into the Stability of Graphene Oxide Aqueous Dispersions

Understanding graphene oxide's stability (or lack thereof) in liquid solvents is critical for fine-tuning the material's characteristics and its potential involvement in future applications. In this work, through the use of structural and surface investigations, the alteration of the structural and edge-surface properties of 2D graphene oxide nanosheets was monitored over a period of eight weeks by involving DLS, zeta potential, XRD, XPS, Raman and FT-IR spectroscopy techniques. The samples were synthesized as an aqueous suspension by an original modified Marcano-Tour method centred on the sono-chemical exfoliation of graphite. Based on the acquired experimental results and the available literature, a phenomenological explanation of the two underlying mechanisms responsible for the meta-stability of graphene oxide aqueous dispersions is proposed. It is based on the cleavage of the carbon bonds in the first 3-4 weeks, while the bonding of oxygen functional groups on the carbon lattice occurs, and the transformation of epoxide and hydroxyl groups into adsorbed water molecules in a process driven by the availability of hydrogen in graphene oxide nanosheets.

Al3+ Modification of Graphene Oxide Membranes: Effect of Al Source

Graphene oxide (GO) membranes are promising materials for water filtration applications due to abundant nanochannels in the membrane structure. Because GO membranes are unstable in water, metal cations such as Al³⁺ are often introduced to the membrane structure to promote cross-linking between individual GO sheets. Here, we describe a simple yet versatile method to incorporate Al³⁺ into GO membranes formed via a slow self-assembly process. Specifically, we directly added aluminum to acidic GO sheet solutions from a variety of sources: Al₂O₃, AlCl₃ and Al foil. Each species reacts differently with water, which can affect the GO solution pH and thus the density of carboxylate groups on the sheet edges available for cross-linking to the Al³⁺ cations. We demonstrate through characterization of the GO sheet solutions as well as the as-formed membranes' morphologies, hydrophobicities, and structures that the extent to which the Al³⁺ cross-links to the GO sheet edges vs. the GO sheet basal planes is dependent on the Al source. Our results indicate that greatest enhancements in the membrane stability occur when electrostatic and coordination interactions between Al³⁺ and the carboxylate groups on the GO sheet edges are more extensive than Al³⁺-π interactions between basal planes.

Identifying the Active Sites of Heteroatom Graphene as a Conductive Membrane for the Electrochemical Filtration of Organic Contaminants

The dopants of sulfur, nitrogen, or both, serving as the active sites, into the graphitic framework of graphene is an efficient strategy to improve the electrochemical performance of electrochemical membrane filtration. However, the covalent bonds between the doped atoms and the substrate that form different functional groups have a significant role in the specific activity for pollutant degradation. Herein, we found that the singly doped heteroatom graphene (NG and SG) achieved superior removal efficiency of pollutants as compared with that of the double doped heteroatom graphene (SNG). Mechanism studies showed that the doped N of NG presented as graphitic N and substantially increased electron transfer, whereas the doped S of SG posed as -C-SOx-C- provided more adsorption sites to improve electrochemical performance. However, in the case of SNG, the co-doped S and N cannot form the efficient graphitic N and -C-SOx-C- for electrochemical degradation, resulting in a low degradation efficiency. Through the fundamental insights into the bonding of the doped heteroatom on graphene, this work furnishes further directives for the design of desirable heteroatom graphene for membrane filtration.

MXene-Based Porous Monoliths

In the past decade, a thriving family of 2D nanomaterials, transition-metal carbides/nitrides (MXenes), have garnered tremendous interest due to its intriguing physical/chemical properties, structural features, and versatile functionality. Integrating these 2D nanosheets into 3D monoliths offers an exciting and powerful platform for translating their fundamental advantages into practical applications. Introducing internal pores, such as isotropic pores and aligned channels, within the monoliths can not only address the restacking of MXenes, but also afford a series of novel and, in some cases, unique structural merits to advance the utility of the MXene-based materials. Here, a brief overview of the development of MXene-based porous monoliths, in terms of the types of microstructures, is provided, focusing on the pore design and how the porous microstructure affects the application performance.

Recent Advances on Early-Stage Fire-Warning Systems: Mechanism, Performance, and Perspective

Early-stage fire-warning systems (EFWSs) have attracted significant attention owing to their superiority in detecting fire situations occurring in the pre-combustion process. Substantial progress on EFWSs has been achieved recently, and they have presented a considerable possibility for more evacuation time to control constant unintentional fire hazards in our daily life. This review mainly makes a comprehensive summary of the current EFWSs, including the working mechanisms and their performance. According to the different working mechanisms, fire alarms can be classified into graphene oxide-based fire alarms, semiconductor-based fire alarms, thermoelectric-based fire alarms, and fire alarms on other working mechanisms. Finally, the challenge and prospect for EFWSs are briefly provided by comparing the art of state of fire alarms. This work can propose a more comprehensive understanding of EFWSs and a guideline for the cutting-edge development direction of EFWSs for readers.

Investigation of Composite Protective Coatings Coregulated by Core-Shell Structures and Graphene Oxide Interfaces

The construction of multiple microstructures is a significant measure in improving the protective performance of composite polymer coatings. In this paper, a novel polystyrene acrylate-highly hydrophobic polysiloxane composite emulsion was fabricated by innovatively integrating the core-shell emulsion method and Pickering emulsion method through the interfacial stabilization and molecular polymerization regulation of graphene oxide, achieving a significant improvement in the compatibility of the thermoplastic core with a thermoset shell. The bonding degree between the polystyrene acrylate (PSA) component and the siloxane component is significantly improved in the synthesized composite emulsions, achieving the dual protection of the cementitious substrate with surface shielding and internal crystalline hydrophobicity. The capillary water absorption of the concrete treated with Pickering emulsions is reduced by over 98.3% with high hydrophobicity and low permeability. Meanwhile, the absolute ζ-potential and impedance of composite membranes reach over 45 mV and 10⁹ ohms, respectively, giving the cementitious substrate excellent resistance to ionic attack and acid/alkaline corrosion. In addition, the composite membranes have excellent resistance to tensile cracking and physical erosion, maintaining a favorable adhesion level and plastic deformation under acid/alkaline attack and thermal aging, respectively.

Evolution of Heterogeneity and Chemical Functionality during the Oxidation of Graphite

A kinetic study of graphite oxidation provided several insights into the mechanism of graphite oxide (GO) synthesis. The oxidation was observed to occur in two distinct stages, with the first stage lasting for 20 to 30 min and including a rapid disruption of the graphene sp2 network, the introduction of oxygen functional groups, and an increase in the spacing between the sheets. The second stage saw a marked decrease in the rate of change in spacing, a significant increase in the homogeneity of the GO, little to no further disruption of the sp2 network, and continuing evolution of the oxygen functionality. The study was based on the analysis by Raman spectroscopy, XRD, FTIR, SEM, and TGA of material taken at various times from a modified Hummers oxidation reaction following work up.

Co-assembled perylene/graphene oxide photosensitive heterobilayer for efficient neuromorphics

Neuromorphic electronics, which use artificial photosensitive synapses, can emulate biological nervous systems with in-memory sensing and computing abilities. Benefiting from multiple intra/interactions and strong light-matter coupling, two-dimensional heterostructures are promising synaptic materials for photonic synapses. Two primary strategies, including chemical vapor deposition and physical stacking, have been developed for layered heterostructures, but large-scale growth control over wet-chemical synthesis with comprehensive efficiency remains elusive. Here we demonstrate an interfacial coassembly heterobilayer films from perylene and graphene oxide (GO) precursors, which are spontaneously formed at the interface, with uniform bilayer structure of single-crystal perylene and well-stacked GO over centimeters in size. The planar heterostructure device exhibits an ultrahigh specific detectivity of 3.1 × 10¹³ Jones and ultralow energy consumption of 10⁻⁹ W as well as broadband photoperception from 365 to 1550 nm. Moreover, the device shows outstanding photonic synaptic behaviors with a paired-pulse facilitation (PPF) index of 214% in neuroplasticity, the heterosynapse array has the capability of information reinforcement learning and recognition.

Layered heterostructures are promising photosensitive materials for advanced optoelectronics. Here, the authors introduce an interfacial coassembly method to construct large-scale perylene/grahene oxide (GO) heterobilayer for broadband photoreception and efficient neuromorphics.

Control of the Drying Patterns for Complex Colloidal Solutions and Their Applications

The uneven deposition at the edges of an evaporating droplet, termed the coffee-ring effect, has been extensively studied during the past few decades to better understand the underlying cause, namely the flow dynamics, and the subsequent patterns formed after drying. The non-uniform evaporation rate across the colloidal droplet hampers the formation of a uniform and homogeneous film in printed electronics, rechargeable batteries, etc., and often causes device failures. This review aims to highlight the diverse range of techniques used to alleviate the coffee-ring effect, from classic methods such as adding chemical additives, applying external sources, and manipulating geometrical configurations to recently developed advancements, specifically using bubbles, humidity, confined systems, etc., which do not involve modification of surface, particle or liquid properties. Each of these methodologies mitigates the edge deposition via multi-body interactions, for example, particle–liquid, particle-particle, particle–solid interfaces and particle–flow interactions. The mechanisms behind each of these approaches help to find methods to inhibit the non-uniform film formation, and the corresponding applications have been discussed together with a critical comparison in detail. This review could pave the way for developing inks and processes to apply in functional coatings and printed electronic devices with improved efficiency and device yield.

Pickering Emulsion Catalysis: Interfacial Chemistry, Catalyst Design, Challenges, and Perspectives

Pickering emulsions are particle-stabilized surfactant-free dispersions composed of two immiscible liquid phases, and emerge as attractive catalysis platform to surpass traditional technique barrier in some cases. In this review, we have comprehensively summarized the development and the catalysis applications of Pickering emulsions since the pioneering work in 2010. The explicit mechanism for Pickering emulsions will be initially discussed and clarified. Then, summarization is given to the design strategy of amphiphilic emulsion catalysts in two categories of intrinsic and extrinsic amphiphilicity. The progress of the unconventional catalytic reactions in Pickering emulsion is further described, especially for the polarity/solubility difference-driven phase segregation, "smart" emulsion reaction system, continuous flow catalysis, and Pickering interfacial biocatalysis. Challenges and future trends for the development of Pickering emulsion catalysis are finally outlined.

Spanning Network Gels from Nanoparticles and Graph Theoretical Analysis of Their Structure and Properties

Gels self-assembled from colloidal nanoparticles (NPs) translate the size-dependent properties of nanostructures to materials with macroscale volumes. Large spanning networks of NP chains provide high interconnectivity within the material necessary for a wide range of properties from conductivity to viscoelasticity. However, a great challenge for nanoscale engineering of such gels lies in being able to accurately and quantitatively describe their complex non-crystalline structure that combines order and disorder. The quantitative relationships between the mesoscale structural and material properties of nanostructured gels are currently unknown. Here, it is shown that lead telluride NPs spontaneously self-assemble into a spanning network hydrogel. By applying graph theory (GT), a method for quantifying the complex structure of the NP gels is established using a topological descriptor of average nodal connectivity that is found to correlate with the gel's mechanical and charge transport properties. GT descriptions make possible the design of non-crystalline porous materials from a variety of nanoscale components for photonics, catalysis, adsorption, and thermoelectrics.

Structured Ultra-Flyweight Aerogels by Interfacial Complexation: Self-Assembly Enabling Multiscale Designs

The rapid co-assembly of graphene oxide (GO) nanosheets and a surfactant at the oil/water (O/W) interface is harnessed to develop a new class of soft materials comprising continuous, multilayer, interpenetrated, and tubular structures. The process uses a microfluidic approach that enables interfacial complexation of two-phase systems, herein, termed as "liquid streaming" (LS). LS is demonstrated as a general method to design multifunctional soft materials of specific hierarchical order and morphology, conveniently controlled by the nature of the oil phase and extrusion's injection pressure, print-head speed, and nozzle diameter. The as-obtained LS systems can be readily converted into ultra-flyweight aerogels displaying worm-like morphologies with multiscale porosities (micro- and macro-scaled). The presence of reduced GO nanosheets in such large surface area systems renders materials with outstanding mechanical compressibility and tailorable electrical activity. This platform for engineering soft materials and solid constructs opens up new horizons toward advanced functionality and tunability, as demonstrated here for ultralight printed conductive circuits and electromagnetic interference shields.

Controllable dried patterns of colloidal drops

HYPOTHESIS

When an aqueous colloidal drop dries on a solid substrate, the final pattern of the dried deposit can be manipulated through controlling the internal flow states of the drop.

EXPERIMENTS

We report a strategy to control the dried patterns of aqueous colloidal drop by controlling the drop configurations and relative humidity. For this purpose, both sessile and pendant drops are studied.

FINDING

The capillary flow, which is responsible for coffee-ring, is suppressed by increasing the relative humidity. Then, surprisingly, the internal convection in the pendant drop is significantly stronger than that in the sessile drop. This phenomenon leads to the formation of the disc-like and spot-like dried patterns in the sessile and pendant drop, respectively, which are the results of different interactions between the Marangoni and (buoyancy-induced) natural convections in the sessile and pendant drops. In the sessile drop, the Marangoni and natural convections mutually restrain each other due to their opposite flow directions. In contrast, in the pendant drop, the two convections mutually enhance each other, due to their same flow directions. Thisnew strategy offers a foreign-material-free and external-force-free means to control the dried patterns of the drop.

Pickering emulsions stabilized by metal-organic frameworks, graphitic carbon nitride and graphene oxide

Pickering emulsion is a heterogeneous system consisting of at least two immiscible liquids, which are stabilized by solid particles, in which organic solvent or water is dispersed into other phase in form of micrometre-sized droplets. Compared to traditional emulsions stabilized by surfactant, solids are cheap and can be easily separated and recycled by centrifugation or filtration after use. Moreover, the properties of Pickering emulsions can be adjusted by using different types of solid particles. Up to now, Pickering emulsions have been applied in a wide range of areas such as material science and catalysis. Here we review recent studies on Pickering emulsions stabilized by metal-organic framework, graphitic carbon nitride and graphene oxide.

Nanocellulose-Graphene Derivative Hybrids: Advanced Structure-Based Functionality from Top-down Synthesis to Bottom-up Assembly

There is an emerging endeavor of advanced structure-based functionality in the next-generation advanced functional materials inspired by hierarchical architecture for future technical applications. This review provides an impressive range roadmap for constructing advanced functional materials based on the nanocellulose-graphene derivative hybrids, from the top-down synthesis of their hierarchical materials to the bottom-up assembly of their nanoscale building blocks. First, the roadmap started from the top-down synthesis routes of nanocellulose-graphene hierarchical materials into their derivatives, where the pristine properties of nanoscale building blocks are still accessible and processable. Then, the stable-strong synergistic interfacial interactions between nanocellulose chains and graphene derivative nanosheets are uniquely well-suited in this roadmap for constructing scalable hybrid materials with interesting emergent properties. After that, the roadmap presented the bottom-up assembly approaches of these versatile nanoscale building blocks through self-assembly, templating, and mimicking of the bioinspired hierarchical structures toward advanced functional materials. Thereafter, toward understanding the specificity, superiority, and functionality of such hybrid materials, the roadmap discussed the properties and potential applications so far. Finally, the roadmap pointed out the key challenges and future outlooks, paving the way for comprehensive understanding and ideal designing of hybrid structures from nanocellulose and graphene derivatives.

Application of Metal-Organic Framework-Based Composites for Gas Sensing and Effects of Synthesis Strategies on Gas-Sensitive Performance

Gas sensing materials, such as semiconducting metal oxides (SMOx), carbon-based materials, and polymers have been studied in recent years. Among of them, SMOx-based gas sensors have higher operating temperatures; sensors crafted from carbon-based materials have poor selectivity for gases and longer response times; and polymer gas sensors have poor stability and selectivity, so it is necessary to develop high-performance gas sensors. As a porous material constructed from inorganic nodes and multidentate organic bridging linkers, the metal-organic framework (MOF) shows viable applications in gas sensors due to its inherent large specific surface area and high porosity. Thus, compounding sensor materials with MOFs can create a synergistic effect. Many studies have been conducted on composite MOFs with three materials to control the synergistic effects to improve gas sensing performance. Therefore, this review summarizes the application of MOFs in sensor materials and emphasizes the synthesis progress of MOF composites. The challenges and development prospects of MOF-based composites are also discussed.

Recent Progress in Superhydrophilic Carbon-Based Composite Membranes for Oil/Water Emulsion Separation

The purification of stabilized oil/water emulsions is essential to meet the ever increasing demand for monitoring water in the environment, which has been addressed with superwetting carbon-based separation membranes. These include superhydrophilic carbon-based membranes whose progress in recent years and perspectives are reviewed in this paper. The membrane construction strategy is organized into four parts, vacuum-assisted self-assembly, sol-gel process, electrospinning, and vacuum-assisted filtration. In each section, the design strategies and their responding disadvantages have been comprehensively discussed. The challenges and prospects concerning the superhydrophilic carbon-based separation membranes for oily wastewater purification are also summarized to arouse researchers to carry out more studies.

Spontaneous Adsorption of Graphene Oxide on Multiple Polymeric Surfaces

The controllable integration of low-dimensional nanomaterials on solid surfaces is pivotal for the fabrication of next-generation miniaturized electronic and optoelectronic devices. For instance, organization of two-dimensional (2D) nanomaterials on polymeric surfaces paves the way for the development of flexible electronics for applications in wearable devices. Nevertheless, the understanding of the molecular interactions between these nanomaterials and the polymeric surfaces remains limited, which impedes the rational design of 2D nanomaterial-based functional coatings. In the current work, we report that graphene oxide (GO) nanosheets, in their dispersion phase, can be adsorbed on multiple polymeric surfaces in a spontaneous manner. Both experimental findings and simulational results indicate that the main driving force is hydrogen bonding interactions, although other molecular interactions such as polarity and dispersion ones contribute to the adsorption as well. The relatively high hydrogen bonding interactions cause not only increased GO surface coverage but also enhanced GO adsorption kinetics on polymeric surfaces. The adsorbed GO layers are robust, which can be explained by the large aspect ratios of GO nanosheets and the presence of multiple spots for molecular interactions. As a proof of concept, GO-covered polymethyl methacrylate effectively decreases surface static charges when compared with its pristine counterpart. The integration of the GO constituents turns many inert polymeric substrates into multifunctional hybrids, and the functional groups on GO can be used further to bridge with additional functional materials for the development of high-performance electronic devices.

Low Surface Roughness Graphene Oxide Film Reduced with Aluminum Film Deposited by Magnetron Sputtering

Graphene film has wide applications in optoelectronic and photovoltaic devices. A novel and facile method was reported for the reduction of graphene oxide (GO) film by electron transfer and nascent hydrogen produced between aluminum (Al) film deposited by magnetron sputtering and hydrochloric acid (HCl) solution for only 5 min, significantly shorter than by other chemical reduction methods. The thickness of Al film was controlled utilizing a metal detection sensor. The effect of the thickness of Al film and the concentration of HCl solution during the reduction was explored. The optimal thickness of Al film was obtained by UV-Vis spectroscopy and electrical conductivity measurement of reduced GO film. Atomic force microscope images could show the continuous film clearly, which resulted from the overlap of GO flakes, the film had a relatively flat surface morphology, and the surface roughness reduced from 7.68 to 3.13 nm after the Al reduction. The film sheet resistance can be obviously reduced, and it reached 9.38 kΩ/sq with a high transmittance of 80% (at 550 nm). The mechanism of the GO film reduction by electron transfer and nascent hydrogen during the procedure was also proposed and analyzed.

Chemical Strategies for Making Strong Graphene Materials

Graphene materials have been widely applied in various fields because of their remarkable mechanical and electrical properties. However, two obstacles arise during the assembly of graphene platelets into macroscale graphene materials and composites that impair the performance of the resultant graphene materials: 1) the voids between the graphene platelets, and 2) the wrinkling of the graphene platelets. In the past decade, several strategies have been developed to eliminate these obstacles. These strategies result in strong macroscale graphene materials, such as graphene fibers with tensile strengths of over 3.4 GPa and sheets with tensile strengths of over 1.5 GPa, which have many practical applications. This Minireview summarizes the effective strategies for assembling graphene materials and compares their advantages and drawbacks. The preparation processes as well as the resulting fundamental mechanical properties and wide spectrum of electrical and magnetic properties are also discussed. Finally, our outlook for the future of this field is presented.

Tailoring conductive network nanostructures of ZIF-derived cobalt-decorated N-doped graphene/carbon nanotubes for microwave absorption applications

Confronted with microwave pollution issues, there is an urgent need for microwave absorption materials that possess optimal combinations of dielectric loss and magnetic loss properties. While a variety of studies focus on the components, the construction of nanostructure is rarely studied, which is of equivalent significance to microwave absorber design. In this work, Co-ZIF-67 was adopted as self-template to grow N-doped graphene/carbon nanotube interlinked conductive networks in-situ under a one-step carbonization process with tailored microwave absorption properties. Diverse microwave absorption performance could be achieved by directly adjusting the proportions among ingredients and the calcination temperature, obtaining a maximum value of reflection loss of -65.45 dB at 17.5 GHz with a sample thickness of just 1.5 mm. The effective absorption bandwidth could be tailored from 3.75 to 18 GHz among different thickness as required. The nanostructures had an apparent impact on the corresponding microwave absorption performance, in which the N-doped carbon-based conductive networks, ferromagnetic cobalt atoms, and interfaces among heterostructure strengthened the dipolar polarization and conductivity loss, magnetic loss, and interfacial polarization, respectively. This synthesis strategy offers a promising pathway for integrating nanostructures and functions, catering to requirements for designing and optimizing prospective microwave absorbers.

Molecular Insight into the Adsorption Thermodynamics and Interfacial Behavior of GOs at the Liquid-Liquid Interface

The adsorption of two-dimensional (2-D) graphene oxide (GO) nanosheets at liquid-liquid interfaces has broad technological implications from functional material preparations to oil-water emulsification. Molecular-level understanding of the adsorption thermodynamics and the interfacial behavior is of great significance. Here, the adsorption free energy of GO nanosheets at the water-cyclohexane system was simulated, in which the effect of oxygen-containing groups and deprotonation has been investigated. It was observed that the neutral GO (GO-COOH) has obvious interfacial activity with a reduction of interfacial tension, while the deprotonated GO (GO-COO^-) shows a weak interface affinity. There exists an optimal oxidization degree that could cause the best interfacial stability, which is attributed to the balance of interfacial hydrophilic-hydrophobic interactions. The interaction arising from water is the main factor determining interfacial activity. The interfacial morphology and dynamics of GO nanosheets have also been simulated, in which an anisotropic 2-D translation and rotation along the interface were revealed. Our simulation results provide new insight into the adsorption mechanism and dynamics behavior of GO at the oil-water interface.

Wafer-Scale Lateral Self-Assembly of Mosaic Ti3C2Tx MXene Monolayer Films

Bottom-up assembly of two-dimensional (2D) materials into macroscale morphologies with emergent properties requires control of the material surroundings, so that energetically favorable conditions direct the assembly process. MXenes, a class of recently developed 2D materials, have found new applications in areas such as electrochemical energy storage, nanoscale electronics, sensors, and biosensors. In this paper, we present a lateral self-assembly method for wafer-scale deposition of a mosaic-type 2D MXene flake monolayer that spontaneously orders at the interface between two immiscible solvents. ReaxFF molecular dynamics simulations elucidate the interactions of a MXene flake with the solvents and its stability at the liquid/liquid interface, the prerequisite for MXene flakes self-assembly at the interface. Moreover, facile transfer of this monolayer onto a flat substrate (Si, glass) results in high-coverage monolayer films with uniform thickness and homogeneous optical properties. Multiscale characterization of the resulting films reveals the mosaic structure and sheds light on the electronic properties of the films, which exhibit good electrical conductivity over cm-scale areas.

Unmodified Clay Nanosheets at the Air-Water Interface

Quasi-two-dimensional (2D) nanolayers, such as graphene oxide or clay layers, adhere to gas-liquid or liquid-liquid interfaces. Particularly, clays are of wide general interest in this context because of their extensive and crucial use as Pickering emulsion stabilizers, as well as for their ability to provide colloidosome capsules. So far, clays could only be localized at oil-water or air-saline-water interfaces in aggregated states, while our results now show that clay nanosheets without any modification can be located at air-deionized-water interfaces. The clay mineral used in the present work is synthetic fluorohectorite with a very high aspect ratio and superior quality in homogeneity and charge distribution compared to other clay minerals. This clay mineral is more suitable for achieving unmodified clay anchoring to fluid interfaces compared to other clay minerals used in previous works. In this context, we studied clay nanosheet organization at the air-water interface by combining different experimental methods: Langmuir-Blodgett trough studies, scanning electron microscopy (SEM) studies of film deposits, grazing-incidence X-ray off-specular scattering (GIXOS), and Brewster angle microscopy (BAM). Clay films formed at the air-water interface could be transferred to solid substrates by the Langmuir-Schaefer method. The BAM results indicate a dynamic equilibrium between clay sheets on the interface and in the subphase. Because of this dynamic equilibrium, the Langmuir monolayer surface pressure does not change significantly when pure clay sheets are spread on the liquid surface. However, also, GIXOS results confirm that there are clay nanosheets at the air-water interface. In addition, we find that clay sheets modified by a branched polymer are much more likely to be confined to the interface.

Polymer-Free Emulsion-Templated Graphene-Based Sponges for Contaminant Removal

An emulsion-templated porous material can be formed by polymerizing the continuous phase of high internal phase Pickering emulsions (HIPEs). Although polymerization is a key step to maintain the pore size and integrity of the final sponge, it lowers the effective specific surface area of the final sponge as the continuous phase makes up at least half of the HIPE's volume. Hence, eliminating the need of polymerization not only eases the material processing but also leads to a greater specific surface area. Here, we report a novel strategy in which none of the emulsion phases require polymerization and is therefore a versatile methodology. For this purpose, several oil-in-water Pickering emulsions were prepared using graphene oxide (GO) and cellulose nanocrystals (CNCs) as the stabilizing agents. GO nanosheets are then reduced by mixing the emulsions with an adequate amount of vitamin C as a green reducing agent. Removal of the oil phase via multiple washing and boiling steps results in the formation of the ultimate reduced graphene oxide (rGO)/CNC sponge. The integrity of the structure remains intact and results in the formation of pores that are comparable in size to the droplets because of (i) the strong adhesion of GO and CNC at the oil/water interface in the initial Pickering emulsions and (ii) the strong intermolecular interactions between GO and CNC particles within the water phase. The sponge was then evaluated for its contaminant removal applicability using methylene blue and found to be effective in different water chemistries and outperform previously reported poly(HIPEs) and granular activated carbon. This is the first report on the formation of a polymer-free emulsion-templated sponge, and we believe that this novel nanomaterial paves the road for the fabrication of other emulsion-templated sponges. Although the proposed application in this work is contaminant removal, it could also be utilized in forming electronic devices and sensors because of the incorporation of rGO as a conductive component.