Underwater Communication and Optical Camouflage Ionogels

Super-Tough, Non-Swelling Zwitterionic Hydrogel Sensor Based on the Hofmeister Effect for Potential Motion Monitoring of Marine Animals

Hydrogel-based electronic devices in aquatic environments have sparked widespread research interest. Nevertheless, the challenge of developing hydrogel electronics underwater has not been profoundly surmounted because of the fragility and swelling of hydrogels in aquatic environments. In this work, a zwitterionic double network hydrogel comprised of polyvinyl alcohol (PVA), poly(sulfobetaine methacrylate) (PSBMA), and sulfuric acid (H2SO4) demonstrates super-tough and non-swelling performance. The Hofmeister effect of H2SO4 and PSBMA induces the PVA chains to form numerous nanocrystalline domains, which serve as the primary physical crosslinking points and provide effective energy dissipation. H2SO4 induces a strong salting-out effect to facilitate PVA crystallization and the formation of a dense and stable network structure that inhibits swelling. The resulting hydrogel exhibits an ultra-high toughness of 4.61 MJ m-3, non-swelling, and long-term stability for up to a month in pure water and seawater. Based on this, a hydrogel-based seawater strain sensor has been developed to monitor the underwater movements of marine animal models. Reliable and stable sensing performance ensures real-time collection of underwater motion signals, despite the impacts of water flow and the interference of ions. This study provides a facile approach to designing super-tough and non-swelling hydrogels and further expands the application of underwater electronic devices.

Straightforward preparation of a tough and stretchable ion gel

Ion gels, polymer networks swollen by ionic liquids, are expected to be applied to wearable devices that are tolerant to repeated stretching. High strength and excellent stretchability was achieved due to the numerous physical cross-links with abundant polymer chain entanglements in addition to a small number of immobile chemical cross-links, even though the ion gel was prepared by a facile methodology.

Asymmetric Wettability Hydrogel Surfaces for Enduring Electromyographic Monitoring

Hydrogel electrode interfaces have shown tremendous promise in the acquisition of surface electromyography (EMG) signals. However, the perspiration or moisture environments will trigger the deadhesion between hydrogel electrodes and human skin. Despite the hydrophobic/hydrophilic surfaces can perform the anti-moisture or adhesion respectively, it remains a challenge to integrally form a Janus hydrogel with homogeneous mechanical elasticity and electronic performance. Herein, a surface induction strategy is proposed to approach the hydrophobic/hydrophilic hydrogel surfaces. The hydrophobic interaction between surfactants and molds regulates the distribution of hydrophobic/hydrophilic monomers on the surface. The hydrophobic molds induce a hydrophilic hydrogel surface, while the hydrophilic molds induce a hydrophobic surface. It presents a new phenomenon of reversal wettability inducing and optional hydrogel surfaces. The integral Janus hydrogel can be easily obtained by the hydrophilic molds. Balance of adhesion, elasticity, and conductivity endows the hydrogel electrode patch with durable conformal adhesion and high-fidelity EMG signals even in the sweaty epidermis due to the asymmetric wettability surfaces. This hydrogel performs the quantitative description of muscle strength and accurate fatigue assessment. It offers a reliable candidate for future practical applications in continuous digital healthcare and intelligent human-machine interaction, even the Metaverse.

Mechanical Regulation of Polymer Gels

The mechanical properties of polymer gels devote to emerging devices and machines in fields such as biomedical engineering, flexible bioelectronics, biomimetic actuators, and energy harvesters. Coupling network architectures and interactions has been explored to regulate supportive mechanical characteristics of polymer gels; however, systematic reviews correlating mechanics to interaction forces at the molecular and structural levels remain absent in the field. This review highlights the molecular engineering and structural engineering of polymer gel mechanics and a comprehensive mechanistic understanding of mechanical regulation. Molecular engineering alters molecular architecture and manipulates functional groups/moieties at the molecular level, introducing various interactions and permanent or reversible dynamic bonds as the dissipative energy. Molecular engineering usually uses monomers, cross-linkers, chains, and other additives. Structural engineering utilizes casting methods, solvent phase regulation, mechanochemistry, macromolecule chemical reactions, and biomanufacturing technology to construct and tailor the topological network structures, or heterogeneous modulus compositions. We envision that the perfect combination of molecular and structural engineering may provide a fresh view to extend exciting new perspectives of this burgeoning field. This review also summarizes recent representative applications of polymer gels with excellent mechanical properties. Conclusions and perspectives are also provided from five aspects of concise summary, mechanical mechanism, biofabrication methods, upgraded applications, and synergistic methodology.

Robust, transparent, self-healable, recyclable all-starch-based gel with thermoelectric capability for wearable sensor

Conventional all-starch-based (ASB) gels are weak and lack ductility. The preparation of a robust ASB gel with multi-functionalities e.g., self-healing, anti-freezing, conductivity, and so forth, is highly desirable but challenging. Herein, a new kind of ASB gel was prepared by gelatinizing starch in urea and choline chloride solution (UC) with the aid of water. Its tensile strength was up to 1.08 MPa with a tensile strain of 313 %, and this value hardly changed after 10 days ageing. A high healing efficiency of 98 % can be achieved after 1 h of healing at room temperature, and the healed tensile strength reaches up to ca. 1.06 MPa, which is almost the highest value for ASB gel. The resultant ASB gel can surfer from bending and twisting at -80 °C. Moreover, ASB gel also exhibits excellent biocompatibility and biodegradability. In addition, UC endowed the ASB gel with ion conductivity, allowing it to be used as a flexible strain sensor to monitor human movement. The ion-conductive ASB gel also exhibited thermoelectric ability with a Seebeck coefficient of 2.5 mV K-1, which can be further improved to 5 mV K-1 with a maximum output voltage of 252 mV by introducing a gradient of ionic concentration.

Multi-Modal Sensing Ionogels with Tunable Mechanical Properties and Environmental Stability for Aquatic and Atmospheric Environments

Ionogels have garnered significant interest due to their great potential in flexible iontronic devices. However, their limited mechanical tunability and environmental intolerance have posed significant challenges for their integration into next-generation flexible electronics in different scenarios. Herein, the synergistic effect of cation-oxygen coordination interaction and hydrogen bonding is leveraged to construct a 3D supramolecular network, resulting in ionogels with tunable modulus, stretchability, and strength, achieving an unprecedented elongation at break of 10 800%. Moreover, the supramolecular network endows the ionogels with extremely high fracture energy, crack insensitivity, and high elasticity. Meanwhile, the high environmental stability and hydrophobic network of the ionogels further shield them from the unfavorable effects of temperature variations and water molecules, enabling them to operate within a broad temperature range and exhibit robust underwater adhesion. Then, the ionogel is assembled into a wearable sensor, demonstrating its great potential in flexible sensing (temperature, pressure, and strain) and underwater signal transmission. This work can inspire the applications of ionogels in multifunctional sensing and wearable fields.

A Recyclable Ionogel with High Mechanical Robustness Based on Covalent Adaptable Networks

Ionogels are an emerging class of soft materials for flexible electronics, with high ionic conductivity, low volatility, and mechanical stretchability. Recyclable ionogels are recently developed to address the sustainability crisis of current electronics, through the introduction of non-covalent bonds. However, this strategy sacrifices mechanical robustness and chemical stability, severely diminishing the potential for practical application. Here, covalent adaptable networks (CANs) are incorporated into ionogels, where dynamic covalent crosslinks endow high strength (11.3 MPa tensile strength), stretchability (2396% elongation at break), elasticity (energy loss coefficient of 0.055 at 100% strain), and durability (5000 cycles of 150% strain). The reversible nature of CANs allows the ionogel to be closed-loop recyclable for up to ten times. Additionally, the ionogel is toughened by physical crosslinks between conducting ions and polymer networks, breaking the common dilemma in enhancing mechanical properties and electrical conductivity. The ionogel demonstrates robust strain sensing performance under harsh mechanical treatments and is applied for reconfigurable multimodal sensing based on its recyclability. This study provides insights into improving the mechanical and electrical properties of ionogels toward functionally reliable and environmentally sustainable bioelectronics.

Endocytosis-Inspired Zwitterionic Gel Tape for High-Efficient and Sustainable Underoil Adhesion

Marine oil exploration is important yet greatly increases the risk of oil leakage, which will result in severe environment pollution and economic losses. It is an urgent need to develop effective underoil adhesives. However, realizing underoil adhesion is even harder than those underwater, due to the stubborn attachment of a highly viscous oil layer on target surface. Here, inspired by endocytosis, a tough gel tape composed of zwitterionic polymer network and zwitterionic surfactants is developed. The amphiphilic surfactants can form micelle to capture the oil droplets and transport them from the interface to gel via electrostatic attraction of polymer backbone, mimicking the endocytosis and achieving robust underoil adhesion. Benefiting from the oil-resistance of polymer backbone, the gel further realizes a combination of i) long-term adhesion with high durability, ii) repeated adhesion in oil, and iii) renewable adhesion efficiency after exhausted use. The tape exhibits an ultra-high adhesive toughness of 2446.86 J m-2 to stainless steel in silicone oil after 30 days' oil-exposure; such value of adhesive toughness surpasses many of those achieved in underwater adhesion and is greater than underoil adhesion performance of commercial tape. The strategy illustrated here will motivate the design of sustainable and efficient adhesives for wet environments.

Recent Advancements in Gel Polymer Electrolytes for Flexible Energy Storage Applications

Since the last decade, the need for deformable electronics exponentially increased, requiring adaptive energy storage systems, especially batteries and supercapacitors. Thus, the conception and elaboration of new deformable electrolytes becomes more crucial than ever. Among diverse materials, gel polymer electrolytes (hydrogels, organogels, and ionogels) remain the most studied thanks to the ability to tune the physicochemical and mechanical properties by changing the nature of the precursors, the type of interactions, and the formulation. Nevertheless, the exploitation of this category of electrolyte as a possible commercial product is still restrained, due to different issues related to the nature of the gels (ionic conductivity, evaporation of filling solvent, toxicity, etc.). Therefore, this review aims to resume different strategies to tailor the properties of the gel polymer electrolytes as well as to provide recent advancements in the field toward the elaboration of deformable batteries and supercapacitors.

Transforming Commercial Polymers into Tough yet Switchable Adhesives by Trident Photoswitch Molecule Doping: Break Adhesion-Switchability Paradox

Here, a trident molecule doping strategy is introduced to overcome both cohesion-adhesion trade-off and adhesion-switchability conflict, transforming commercial polymers into tough yet photo-switchable adhesives. The strategy involves initial rational design of new trident photoswitch molecules namely TAzo-3 featuring azobenzene and hydroxy-terminated alkyl chains involved rigid-soft tri-branch structure, and subsequent doping into commercial polycaprolactone (PCL) via simple blending. Unique design enables TAzo-3 as a versatile dopant, not only regulating the internal and external supramolecular interaction to balance cohesion and interface adhesion for tough bonding, but also affording marked photothermal effect to facilitate rapid adhesive melting for great photo-switchability. Thus, the optimal TAzo-3-doped PCL (TAzo-3@P) displays markedly-improved bonding performance on diverse substrates compared to linear azobenzene-doped PCL and pure PCL. Impressively, TAzo-3@P on polymethyl methacrylate (PMMA) attains large room-temperature adhesion strength of 6.7 MPa - surpassing most reported adhesives and many commercial adhesives on PMMA, along with easy photo-induced detachment with remarkable switch ratio of 2.09 × 105. Besides, TAzo-3@P can also act as "permanent" adhesives for only adhesion, demonstrating excellent multi-reusability, anti-freezing and waterproof ability. Mechanism studies unveil that the switchable adhesion is closely linked with the dopant molecule structure while rigid-soft coupled trident structures and hydroxy-terminated alkyl chains are key factors.

Flexible iontronics with super stretchability, toughness and enhanced conductivity based on collaborative design of high-entropy topology and multivalent ion-dipole interactions

All-solid-state ionic conductive elastomers (ASSICEs) are emerging as a promising alternative to hydrogels and ionogels in flexible electronics. Nevertheless, the synthesis of ASSICEs with concomitant mechanical robustness, superior ionic conductivity, and cost-effective recyclability poses a formidable challenge, primarily attributed to the inherent contradiction between mechanical strength and ionic conductivity. Herein, we present a collaborative design of high-entropy topological network and multivalent ion-dipole interaction for ASSICEs, and successfully mitigate the contradiction between mechanical robustness and ionic conductivity. Benefiting from the synergistic effect of this design, the coordination, de-coordination, and intrachain transfer of Li+ are effectively boomed. The resultant ASSICEs display exceptional mechanical robustness (breaking strength: 7.45 MPa, fracture elongation: 2621%, toughness: 107.19 MJ m-3) and impressive ionic conductivity (1.15 × 10-2 S m-1 at 25 °C). Furthermore, these ASSICEs exhibit excellent environmental stability (fracture elongation exceeding 1400% at 50 °C or -60 °C) and recyclability. Significantly, the application of these ASSICEs in a strain sensor highlights their potential in various fields, including human-interface communication, aerospace vacuum measurement, and medical balloon monitoring.

Ultra-Fast-Healing Glassy Hyperbranched Plastics Capable of Restoring 26.4 MPa Tensile Strength within One Minute at Room Temperature

The growing concern regarding widespread plastic pollution has propelled the development of sustainable self-healing plastics. Although considerable efforts have been dedicated to fabricating self-healing plastics, achieving rapid healing at room temperature is extremely challenging. Herein, we have developed an ultra-fast-healing glassy polyurethane (UGPU) by designing a hyperbranched molecular structure with a high density of multiple hydrogen bonds (H-bonds) on compliant acyclic heterochains and introducing trace water to form water bridge across the fractured surfaces. The compliant acyclic heterochains allow the dense multiple hydrogen bonds to form a frozen network, enabling tensile strength of up to 70 MPa and storage modulus of 2.5 GPa. The hyperbranched structure can drive the reorganization of the H-bonding network through the high mobility of the branched chains and terminals, thereby leading to self-healing ability at room temperature. Intriguingly, the presence of trace water vapor facilitates the formation of activated layers and the rearrangement of networks across the fractured UGPU sections, thereby enabling ultra-fast self-healing at room temperature. Consequently, the restored tensile strength after healing for 1 minute achieves a historic-record of 26.4 MPa. Furthermore, the high transparency (>90 %) and ultra-fast healing property of UGPU make it an excellent candidate for advanced optical and structural materials.

Nature-inspired adhesive systems

Many organisms in nature thrive in intricate habitats through their unique bio-adhesive surfaces, facilitating tasks such as capturing prey and reproduction. It's important to note that the remarkable adhesion properties found in these natural biological surfaces primarily arise from their distinct micro- and nanostructures and/or chemical compositions. To create artificial surfaces with superior adhesion capabilities, researchers delve deeper into the underlying mechanisms of these captivating adhesion phenomena to draw inspiration. This article provides a systematic overview of various biological surfaces with different adhesion mechanisms, focusing on surface micro- and nanostructures and/or chemistry, offering design principles for their artificial counterparts. Here, the basic interactions and adhesion models of natural biological surfaces are introduced first. This will be followed by an exploration of research advancements in natural and artificial adhesive surfaces including both dry adhesive surfaces and wet/underwater adhesive surfaces, along with relevant adhesion characterization techniques. Special attention is paid to stimulus-responsive smart artificial adhesive surfaces with tunable adhesive properties. The goal is to spotlight recent advancements, identify common themes, and explore fundamental distinctions to pinpoint the present challenges and prospects in this field.

A novel strategy to construct hydrogels with anti-swelling and water-retention abilities by covalent surface modification

Hydrogels have been widely used in various fields due to their diverse properties and flexible preparation methods. However, limited by the open network structure, hydrogels inevitably lose water in air or absorb water in aqueous solution, resulting in the loss of intrinsic functions, which severely hinders their practical applications. To address this issue, a general strategy was developed by subsequently modifying the surface of hydrogels with branched polyethyleneimine (PEI) and (3-(methacryloxy)propyl)trimethoxysilane (MPS) to covalently construct a dense cross-linked siloxane layer on the hydrogel surface. As a proof of concept, poly(2-(dimethylamino)ethyl methacrylate)/sodium alginate (PDMAEMA/SA) hydrogels were chosen as the model hydrogels to verify the feasibility of this strategy. The hydrogels adsorbed PEI to form amino-rich surfaces through hydrogen bonding, followed by covalently grafting MPS through rapid and catalyst-free mutual chemical reactions between acrylates and amine groups, as well as the hydrolysis of MPS. After modification, robust hydrophobic surfaces were successfully fabricated on the hydrophilic hydrogels. The modified hydrogels exhibited extraordinary anti-swelling and water-retention abilities. As the most typical intrinsic properties of hydrogels, the conductivity and sensing performance were well preserved. The strategy reported here provides a new insight into the construction of hydrogels with anti-swelling and water-retention abilities.

A Near-Infrared Photothermal-Responsive Underwater Adhesive with Tough Adhesion and Antibacterial Properties

Developing tunable underwater adhesives that possess tough adhesion in service and easy detachment when required remains challenging. Herein, a strategy is proposed to design a near infrared (NIR) photothermal-responsive underwater adhesive by incorporating MXene (Ti3C2Tx)-based nanoparticles within isocyanate-modified polydimethylsiloxane (PDMS) polymer chains. The developed adhesive exhibits long-term and tough adhesion with an underwater adhesion strength reaching 5.478 MPa. Such strong adhesion is mainly attributed to the covalent bonds and hydrogen bonds at the adhesive-substrate interface. By making use of the photothermal-response of MXene-based nanoparticles and the thermal response of PDMS-based chains, the adhesive possesses photothermal-responsive performance, exhibiting sharply diminished adhesion under NIR irradiation. Such NIR-triggered tunable adhesion allows for easy and active detachment of the adhesive when needed. Moreover, the underwater adhesive exhibits photothermal antibacterial property, making it highly desirable for underwater applications. This work enhances the understanding of photothermal-responsive underwater adhesion, enabling the design of tunable underwater adhesives for biomedical and engineering applications.

Electronic Skin for Health Monitoring Systems: Properties, Functions, and Applications

Electronic skin (e-skin), a skin-like wearable electronic device, holds great promise in the fields of telemedicine and personalized healthcare because of its good flexibility, biocompatibility, skin conformability, and sensing performance. E-skin can monitor various health indicators of the human body in real time and over the long term, including physical indicators (exercise, respiration, blood pressure, etc.) and chemical indicators (saliva, sweat, urine, etc.). In recent years, the development of various materials, analysis, and manufacturing technologies has promoted significant development of e-skin, laying the foundation for the application of next-generation wearable medical technologies and devices. Herein, the properties required for e-skin health monitoring devices to achieve long-term and precise monitoring and summarize several detectable indicators in the health monitoring field are discussed. Subsequently, the applications of integrated e-skin health monitoring systems are reviewed. Finally, current challenges and future development directions in this field are discussed. This review is expected to generate great interest and inspiration for the development and improvement of e-skin and health monitoring systems.

Highly conductive and stretchable nanostructured ionogels for 3D printing capacitive sensors with superior performance

Ionogels are promising material candidates for ionotronics due to their excellent ionic conductivity, stretchability, and thermal stability. However, it is challenging to develop 3D printable ionogels with both excellent electrical and mechanical properties. Here, we report a highly conductive and stretchable nanostructured (CSN) ionogel for 3D printing ionotronic sensors. We propose the photopolymerization-induced microphase separation strategy to prepare the CSN ionogels comprising continuous conducting nanochannels intertwined with cross-linked polymeric framework. The resultant CSN ionogels simultaneously achieves high ionic conductivity (over 3 S m-1), high stretchability (over 1500%), low degree of hysteresis (0.4% at 50% strain), wide-temperature-range thermostability (-72 to 250 °C). Moreover, its high compatible with DLP 3D printing enables the fabrication of complex ionogel micro-architectures with high resolution (up to 5 μm), which allows us to manufacture capacitive sensors with superior sensing performances. The proposed CSN ionogel paves an efficient way to manufacture the next-generation capacitive sensors with enhanced performance.

Deformation-Resistant Underwater Adhesion in a Wide Salinity Range

Conventional adhesives experience reduced adhesion when exposed to aqueous environments. The development of underwater adhesives capable of forming strong and durable bonds across various wet substrates is crucial in biomedical and engineering domains. Nonetheless, limited emphasis placed on retaining high adhesion strengths in different saline environments, addressing challenges such as elevated osmotic pressure and spontaneous dimensional alterations. Herein, a series of ionogel-based underwater adhesives are developed using a copolymerization approach that incorporates "dynamic complementary cross-linking" networks. Synergistic engineering of building blocks, cross-linking networks, pendant groups and counterions within ionogels ensures their adhesion and cohesion in brine spanning a wide salinity range. A high adhesion strength of ≈3.6 MPa is attained in freshwater. Gratifyingly, steady adhesion strengths exceeding 3.3 MPa are retained in hypersaline solutions with salinity ranging from 50 to 200 g kg-1, delivering one of the best-performing underwater adhesives suitable for diverse saline solutions. A combination of outstanding durability, reliability, deformation resistance, salt tolerance, and self-healing properties showcases the "self-contained" underwater adhesion. This study shines light on the facile fabrication of catechol-free ionogel-based adhesives, not merely boosting adhesion strengths in freshwater, but also broadening their applicability across various saline environments.

Wearable and Recyclable Water-Toleration Sensor Derived from Lipoic Acid

Flexible wearable sensors recently have made significant progress in human motion detection and health monitoring. However, most sensors still face challenges in terms of single detection targets, single application environments, and non-recyclability. Lipoic acid (LA) shows a great application prospect in soft materials due to its unique properties. Herein, ionic conducting elastomers (ICEs) based on polymerizable deep eutectic solvents consisting of LA and choline chloride are prepared. In addition to the good mechanical strength, high transparency, ionic conductivity, and self-healing efficiency, the ICEs exhibit swelling-strengthening behavior and enhanced adhesion strength in underwater environments due to the moisture-induced association of poly(LA) hydrophobic chains, thus making it possible for underwater sensing applications, such as underwater communication. As a strain sensor, it exhibits highly sensitive strain response with repeatability and durability, enabling the monitoring of both large and fine human motions, including joint movements, facial expressions, and pulse waves. Furthermore, due to the enhancement of ion mobility at higher temperatures, it also possesses excellent temperature-sensing performance. Notably, the ICEs can be fully recycled and reused as a new strain/temperature sensor through heating. This study provides a novel strategy for enhancing the mechanical strength of poly(LA) and the fabrication of multifunctional sensors.

Self-Healing Ionogel-Enabled Self-Healing and Wide-Temperature Flexible Zinc-Air Batteries with Ultra-Long Cycling Lives

Hydrogel-based zinc-air batteries (ZABs) are promising flexible rechargeable batteries. However, the practical application of hydrogel-based ZABs is limited by their short service life, narrow operating temperature range, and repair difficulty. Herein, a self-healing ionogel is synthesized by the photopolymerization of acrylamide and poly(ethylene glycol) monomethyl ether acrylate in 1-ethyl-3-methylimidazolium dicyanamide with zinc acetate dihydrate and first used as an electrolyte to fabricate self-healing ZABs. The obtained self-healing ionogel has a wide operating temperature range, good environmental and electrochemical stability, high ionic conductivity, satisfactory mechanical strength, repeatable and efficient self-healing properties enabled by the reversibility of hydrogen bonding, and the ability to inhibit the production of dendrites and by-products. Notably, the self-healing ionogel has the highest ionic conductivity and toughness compared to other reported self-healing ionogels. The prepared self-healing ionogel is used to assemble self-healing flexible ZABs with a wide operating temperature range. These ZABs have ultra-long cycling lives and excellent stability under harsh conditions. After being damaged, the ZABs can repeatedly self-heal to recover their battery performance, providing a long-lasting and reliable power supply for wearable devices. This work opens new opportunities for the development of electrolytes for ZABs.

3D Printing of Thermo-Mechano-Responsive Photoluminescent Noncovalent Cross-Linked Ionogels with High-Stretchability and Ultralow-Hysteresis for Wearable Ionotronics and Anti-Counterfeiting

Ionogel has recently emerged as a promising ionotronic material due to its good ionic conductivity and flexibility. However, low stretchability and significant hysteresis under long-term loading limit their mechanical stability and repeatability. Developing ultralow hysteresis ionogels with high stretchability is of great significance. Here, a simple and effective strategy is developed to fabricate highly stretchable and ultralow-hysteresis noncovalent cross-linked ionogels based on phase separation by 3D printing of 2-hydroxypropyl acrylate (HPA) in 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4). Ingeniously, the sea-island structure of the physically cross-linked network constructed by the smaller nanodomains and larger nanodomain clusters significantly minimizes the energy dissipation, endowing these ionogels with remarkable stretchability (>1000%), ultra-low hysteresis (as low as 0.2%), excellent temperature tolerance (-33-317 °C), extraordinary ionic conductivity (up to 1.7 mS cm-1), and outstanding durability (5000 cycles). Moreover, due to the formation of nanophase separation and cross-linking structure, the as-prepared ionogels exhibit unique thermochromic and multiple photoluminescent properties, which can synergistically be applied for anti-counterfeiting and encrypting. Importantly, flexible thermo-mechano-multimodal visual ionotronic sensors for strain and temperature sensing with highly stable and reproducible electrical response over 20 000 cycles are fabricated, showing synergistically optical and electrical output performances.

Small Ionic-Liquid-Based Molecule Drives Strong Adhesives

Nature has inspired scientists to fabricate adhesive materials for applications in many burgeoning areas. However, it is still a significant challenge to develop small-molecule adhesives with high-strength, low-temperature and recyclable properties, although these merits are of great interest in various aspects. Herein, we report a series of strong adhesives based on low-molecular-weight molecular solids driven by the terminal modification of ionic liquids (ILs) and subsequent supramolecular self-assembly. The emergence of high strength and liquid-to-solid transitions for these supramolecular aggregates relies on modifying IL with a high melting point motif and enriching the types of noncovalent interactions in the original ILs. Using this strategy, we demonstrate that our IL-based molecular solids can efficiently obtain a high adhesion strength (up to 8.95 MPa). Importantly, we elucidate the mechanism underlying the reversible and strong adhesion enabled by monomer-to-polymer transitions. These fundamental findings provide guidance for the design of high-performance supramolecular adhesive materials.

Multifunctional Polyoxometalates-Based Ionohydrogels toward Flexible Electronics

Multifunctional flexible electronics present tremendous opportunities in the rapidly evolving digital age. One potential avenue to realize this goal is the integration of polyoxometalates (POMs) and ionic liquid-based gels (ILGs), but the challenge of macrophase separation due to poor compatibility, especially caused by repulsion between like-charged units, poses a significant hurdle. Herein, the possibilities of producing diverse and homogenous POMs-containing ionohydrogels by nanoconfining POMs and ionic liquids (ILs) within an elastomer-like polyzwitterionic hydrogel using a simple one-step random copolymerization method, are expanded vastly. The incorporation of polyzwitterions provides a nanoconfined microenvironment and effectively modulates excessive electrostatic interactions in POMs/ILs/H2O blending system, facilitating a phase transition from macrophase separation to a submillimeter scale worm-like microphase-separation system. Moreover, combining POMs-reinforced ionohydrogels with a developed integrated self-powered sensing system utilizing strain sensors and Zn-ion hybrid supercapacitors has enabled efficient energy storage and detection of external strain changes with high precision. This work not only provides guidelines for manipulating morphology within phase-separation gelation systems, but also paves the way for developing versatile POMs-based ionohydrogels for state-of-the-art smart flexible electronics.

Silk-based wearable devices for health monitoring and medical treatment

Previous works have focused on enhancing the tensile properties, mechanical flexibility, biocompatibility, and biodegradability of wearable devices for real-time and continuous health management. Silk proteins, including silk fibroin (SF) and sericin, show great advantages in wearable devices due to their natural biodegradability, excellent biocompatibility, and low fabrication cost. Moreover, these silk proteins possess great potential for functionalization and are being explored as promising candidates for multifunctional wearable devices with sensory capabilities and therapeutic purposes. This review introduces current advancements in silk-based constituents used in the assembly of wearable sensors and adhesives for detecting essential physiological indicators, including metabolites in body fluids, body temperature, electrocardiogram (ECG), electromyogram (EMG), pulse, and respiration. SF and sericin play vital roles in addressing issues related to discomfort reduction, signal fidelity improvement, as well as facilitating medical treatment. These developments signify a transition from hospital-centered healthcare toward individual-centered health monitoring and on-demand therapeutic interventions.

Chemical and Physical Architecture of Macromolecular Gels for Fracturing Fluid Applications in the Oil and Gas Industry; Current Status, Challenges, and Prospects

Hydraulic fracturing is vital in recovering hydrocarbons from oil and gas reservoirs. It involves injecting a fluid under high pressure into reservoir rock. A significant part of fracturing fluids is the addition of polymers that become gels or gel-like under reservoir conditions. Polymers are employed as viscosifiers and friction reducers to provide proppants in fracturing fluids as a transport medium. There are numerous systems for fracturing fluids based on macromolecules. The employment of natural and man-made linear polymers, and also, to a lesser extent, synthetic hyperbranched polymers, as additives in fracturing fluids in the past one to two decades has shown great promise in enhancing the stability of fracturing fluids under various challenging reservoir conditions. Modern innovations demonstrate the importance of developing chemical structures and properties to improve performance. Key challenges include maintaining viscosity under reservoir conditions and achieving suitable shear-thinning behavior. The physical architecture of macromolecules and novel crosslinking processes are essential in addressing these issues. The effect of macromolecule interactions on reservoir conditions is very critical in regard to efficient fluid qualities and successful fracturing operations. In future, there is the potential for ongoing studies to produce specialized macromolecular solutions for increased efficiency and sustainability in oil and gas applications.

Transparent, super stretchable, freezing-tolerant, self-healing ionic conductive cellulose based eutectogel for multi-functional sensors

In this study, we propose a non - toxic and low-cost fabrication of cellulose-based eutectogel through the ZnCl2/H2O/H3PO4 deep eutectic solvent (DES) to dissolve cellulose followed by free-radical polymerization of acrylamide. Particularly, the introduction of cellulose enhances the mechanical properties of eutectogels while eliminating the environmental concerns of the traditional nanocellulose fabrication process. Owing to the dynamic transfer of ions in the eutectogel network, the prepared eutectogels exhibit adjustable conductivity (0.9- 1.37 Sm-1, 15 °C) and stretching sensitivity (Gauge factor = 5.4). The resulting DES - cellulose-based eutectogels (DCEs) exhibited ultra stretchability (4086 %), high toughness (261.3 MJ/m3), excellent ionic conductivity (1.64 Sm-1, 20 °C), high transparency (>85 %), outstanding antifreezing performance (<-80 °C), and other comprehensive characteristics. The DCEs had been proven to have multiple sensitivities to external stimuli, like temperature, strain, and pressure. As a result, the DCEs can be assembled into multifunctional sensors. Moreover, this work also demonstrated the satisfactory performance of DCEs in flexible electroluminescent devices. The low cost and high efficiency made the preparation method of this experiment an efficient strategy for developing high-performance cellulose-based eutectogels, which would greatly promote the application of such materials in areas such as artificial skin for soft robots and other wearable devices.

Self-Healing Hydrogel Bioelectronics

Hydrogels have emerged as powerful building blocks to develop various soft bioelectronics because of their tissue-like mechanical properties, superior bio-compatibility, the ability to conduct both electrons and ions, and multiple stimuli-responsiveness. However, hydrogels are vulnerable to mechanical damage, which limits their usage in developing durable hydrogel-based bioelectronics. Self-healing hydrogels aim to endow bioelectronics with the property of repairing specific functions after mechanical failure, thus improving their durability, reliability, and longevity. This review discusses recent advances in self-healing hydrogels, from the self-healing mechanisms, material chemistry, and strategies for multiple properties improvement of hydrogel materials, to the design, fabrication, and applications of various hydrogel-based bioelectronics, including wearable physical and biochemical sensors, supercapacitors, flexible display devices, triboelectric nanogenerators (TENGs), implantable bioelectronics, etc. Furthermore, the persisting challenges hampering the development of self-healing hydrogel bioelectronics and their prospects are proposed. This review is expected to expedite the research and applications of self-healing hydrogels for various self-healing bioelectronics.

Supramolecular Ionogels for Use in Locating Damage to Underwater Infrastructure

The capacity to self-detect and locate damage to underwater infrastructure in emergencies is vital, as materials and technologies that securely facilitate energy and information transmission are crucial in several fields. Herein, the development of a multifunctional supramolecular ionogel (SIG) and SIG-based devices for use in detecting and locating damage to underwater infrastructure is reported. The SIG is fabricated via the single-step photoinitiated copolymerization of hydroxy and fluorinated monomers in a fluorinated ionic liquid. Hydrogen-bond/ion-dipole-interaction synergy ensures that the SIG is highly ionically conductive and extremely mechanically strong, with underwater self-healing and adhesion properties. It can be used as an underwater ionic cable to provide reporting signals via changes in strain; furthermore, SIG-based devices can be fixed to underwater infrastructure to locate damage via resistance monitoring. The SIG can also be attached to the human body for use in underwater communication, thereby safeguarding maintenance personnel while repairing underwater infrastructure. This study provides a novel pathway for developing supramolecular materials and devices.

Polymerized and Colloidal Ionic Liquids─Syntheses and Applications

The breadth and importance of polymerized ionic liquids (PILs) are steadily expanding, and this review updates advances and trends in syntheses, properties, and applications over the past five to six years. We begin with an historical overview of the genesis and growth of the PIL field as a subset of materials science. The genesis of ionic liquids (ILs) over nano to meso length-scales exhibiting 0D, 1D, 2D, and 3D topologies defines colloidal ionic liquids, CILs, which compose a subclass of PILs and provide a synthetic bridge between IL monomers (ILMs) and micro to macro-scale PIL materials. The second focus of this review addresses design and syntheses of ILMs and their polymerization reactions to yield PILs and PIL-based materials. A burgeoning diversity of ILMs reflects increasing use of nonimidazolium nuclei and an expanding use of step-growth chemistries in synthesizing PIL materials. Radical chain polymerization remains a primary method of making PILs and reflects an increasing use of controlled polymerization methods. Step-growth chemistries used in creating some CILs utilize extensive cross-linking. This cross-linking is enabled by incorporating reactive functionalities in CILs and PILs, and some of these CILs and PILs may be viewed as exotic cross-linking agents. The third part of this update focuses upon some advances in key properties, including molecular weight, thermal properties, rheology, ion transport, self-healing, and stimuli-responsiveness. Glass transitions, critical solution temperatures, and liquidity are key thermal properties that tie to PIL rheology and viscoelasticity. These properties in turn modulate mechanical properties and ion transport, which are foundational in increasing applications of PILs. Cross-linking in gelation and ionogels and reversible step-growth chemistries are essential for self-healing PILs. Stimuli-responsiveness distinguishes PILs from many other classes of polymers, and it emphasizes the importance of segmentally controlling and tuning solvation in CILs and PILs. The fourth part of this review addresses development of applications, and the diverse scope of such applications supports the increasing importance of PILs in materials science. Adhesion applications are supported by ionogel properties, especially cross-linking and solvation tunable interactions with adjacent phases. Antimicrobial and antifouling applications are consequences of the cationic nature of PILs. Similarly, emulsion and dispersion applications rely on tunable solvation of functional groups and on how such groups interact with continuous phases and substrates. Catalysis is another significant application, and this is an historical tie between ILs and PILs. This component also provides a connection to diverse and porous carbon phases templated by PILs that are catalysts or serve as supports for catalysts. Devices, including sensors and actuators, also rely on solvation tuning and stimuli-responsiveness that include photo and electrochemical stimuli. We conclude our view of applications with 3D printing. The largest components of these applications are energy related and include developments for supercapacitors, batteries, fuel cells, and solar cells. We conclude with our vision of how PIL development will evolve over the next decade.

Ultrasensitive Ionic Conductors with Tunable Resistance Switching Temperature Enabled by Phase Transformation of Polymer Cocrystals

Phase-transformable ionic conductors (PTICs) show significant prospects for functional applications due to their reversible resistance switching property. However, the representative design principle of PTICs is utilizing the melt-crystallization transition of ionic liquids, and the resistance switching temperatures of such PTICs cannot be tuned as desired. Herein, a new strategy is proposed to design PTICs with on-demand resistance switching temperatures by using the melt-crystallization transition of polymer cocrystal phase, whose melting temperature shows a linear relationship with the polymer compositions. Owing to the melt of polymer cocrystal domains and the tunable migration of ions in the resistance switching region, the obtained PTICs display ultrahigh temperature sensitivity with a superior temperature coefficient of resistance of -8.50% °C-1 around human body temperature, as compared to various ionic conductors previously reported. Therefore, the PTICs can detect tiny temperature variation, allowing for the intelligent applications for overheating warning and heat dissipation. It is believed that this work may inspire future researches on the development of advanced soft electrical devices.

Microwave-Absorbing Foams with Adjustable Absorption Frequency and Structural Coloration

Microwave-absorbing materials with regulatable absorption frequency and optical camouflage hold great significance in intelligent electronic devices and advanced stealth technology. Herein, we present an innovative microwave-absorbing foam that can dynamically tune microwave absorption frequencies via a simple mechanical compression while in parallel enabling optical camouflage over broad spectral ranges by adjusting the structural colors. The vivid colors spanning different color categories generated from thin-film interference can be precisely regulated by adjusting the thickness of the conformal TiO2 coatings on Ni/melamine foam. Enhanced interfacial and defect-induced polarizations resulting from the introduction of TiO2 coating synergistically contribute to the dielectric attenuation performance. Consequently, such a foam exhibits exceptional microwave absorption capabilities, and the absorption frequency can be dynamically tuned from the S band to the Ku band by manipulating its compression ratio. Additionally, simulation calculations validate the adjustable electromagnetic wave loss behavior, offering valuable insights for the development of next-generation intelligent electromagnetic devices across diverse fields.

Bicontinuous vitrimer heterogels with wide-span switchable stiffness-gated iontronic coordination

Currently, it remains challenging to balance intrinsic stiffness with programmability in most vitrimers. Simultaneously, coordinating materials with gel-like iontronic properties for intrinsic ion transmission while maintaining vitrimer programmable features remains underexplored. Here, we introduce a phase-engineering strategy to fabricate bicontinuous vitrimer heterogel (VHG) materials. Such VHGs exhibited high mechanical strength, with an elastic modulus of up to 116 MPa, a high strain performance exceeding 1000%, and a switchable stiffness ratio surpassing 5 × 103. Moreover, highly programmable reprocessing and shape memory morphing were realized owing to the ion liquid-enhanced VHG network reconfiguration. Derived from the ion transmission pathway in the ILgel, which responded to the wide-span switchable mechanics, the VHG iontronics had a unique bidirectional stiffness-gated piezoresistivity, coordinating both positive and negative piezoresistive properties. Our findings indicate that the VHG system can act as a foundational material in various promising applications, including smart sensors, soft machines, and bioelectronics.

Ultrafast underwater self-healing piezo-ionic elastomer via dynamic hydrophobic-hydrolytic domains

The development of advanced materials capable of autonomous self-healing and mechanical stimulus sensing in aquatic environments holds great promise for applications in underwater soft electronics, underwater robotics, and water-resistant human-machine interfaces. However, achieving superior autonomous self-healing properties and effective sensing simultaneously in an aquatic environment is rarely feasible. Here, we present an ultrafast underwater molecularly engineered self-healing piezo-ionic elastomer inspired by the cephalopod's suckers, which possess self-healing properties and mechanosensitive ion channels. Through strategic engineering of hydrophobic C-F groups, hydrolytic boronate ester bonds, and ions, the material achieves outstanding self-healing efficiencies, with speeds of 94.5% (9.1 µm/min) in air and 89.6% (13.3 µm/min) underwater, coupled with remarkable pressure sensitivity (18.1 kPa-1) for sensing performance. Furthermore, integration of this mechanosensitive device into an underwater submarine for signal transmission and light emitting diode modulation demonstrates its potential for underwater robotics and smarter human-machine interactions.

Solid-state, liquid-free ion-conducting elastomers: rising-star platforms for flexible intelligent devices

Soft ionic conductors have emerged as a powerful toolkit to engineer transparent flexible intelligent devices that go beyond their conventional counterparts. Particularly, due to their superior capacities of eliminating the evaporation, freezing and leakage issues of the liquid phase encountered with hydrogels, organohydrogels and ionogels, the emerging solid-state, liquid-free ion-conducting elastomers have been largely recognized as ideal candidates for intelligent flexible devices. However, despite their extensive development, a comprehensive and timely review in this emerging field is lacking, particularly from the perspective of design principles, advanced manufacturing, and distinctive applications. Herein, we present (1) the design principles and intriguing merits of solid-state, liquid-free ion-conducting elastomers; (2) the methods to manufacture solid-state, liquid-free ion-conducting elastomers with preferential architectures and functions using advanced technologies such as 3D printing; (3) how to leverage solid-state, liquid-free ion-conducting elastomers in exploiting advanced applications, especially in the fields of flexible wearable sensors, bioelectronics and energy harvesting; (4) what are the unsolved scientific and technical challenges and future opportunities in this multidisciplinary field. We envision that this review will provide a paradigm shift to trigger insightful thinking and innovation in the development of intelligent flexible devices and beyond.

Stretchable, Programmable and Magnet-Insensitive Protonic Display Based on Integrated Ionic Circuit

As a new approach to "More than Moore", integrated ionic circuits serve as a possible alternative to traditional electronic circuits, yet the integrated ionic circuit composed of functional ionic elements and ionic connections is still challenging. Herein, a stretchable and transparent ionic display module of the integrated ionic circuit has been successfully prepared and demonstrated by pixelating a proton-responsive hydrogel. It is programmed to excite the hydrogel color change by a Faraday process occurring at the electrode at the specific pixel points, which enables the display of digital information and even color information. Importantly, the display module exhibits stable performance under strong magnetic field conditions (1.7 T). The transparent and stretchable nature of such ionic modules also allows them to be utilized in a broad range of scenarios, which paves the way for integrated ionic circuits.

Strain-Induced Phase Separation and Mechanomodulation of Ionic Conduction in Anisotropic Nanocomposite Ionogels

Ionogels have great potential for the development of tissue-like, soft, and stretchable ionotronics. However, conventional isotropic ionogels suffer from poor mechanical properties, low efficient force transmission, and tardy mechanoelectric response, hindering their practical utility. Here, we propose a simple one-step method to fabricate bioinspired anisotropic nanocomposite ionogels based on a combination of strain-induced phase separation and mechanomodulation of ionic conduction in the presence of attapulgite nanorods. These ionogels show high stretchability (747.1% strain), tensile strength (6.42 MPa), Young's modulus (83.49 MPa), and toughness (18.08 MJ/m3). Importantly, the liquid crystalline domain alignment-induced microphase separation and ionic conductivity enhancement during stretching endow these ionogels with an unusual mechanoelectric response and dual-programmable shape-memory properties. Moreover, the anisotropic structure, good elasticity, and unique resistance-strain responsiveness give the ionogel-based strain sensors high sensitivity, rapid response time, excellent fatigue resistance, and unique waveform-discernible strain sensing, which can be applied to real-time monitoring of human motions. The findings offer a promising way to develop bioinspired anisotropic ionogels to modulate the microstructure and properties for practical applications in advanced ionotronics.

Self-Healable, Self-Adhesive and Degradable MXene-Based Multifunctional Hydrogel for Flexible Epidermal Sensors

Conductive hydrogels have garnered significant interest in the realm of wearable flexible sensors due to their close resemblance to human tissue, wearability, and precise signal acquisition capabilities. However, the concurrent attainment of an epidermal hydrogel sensor incorporating reliable self-healing capabilities, biodegradability, robust adhesiveness, and the ability to precisely capture subtle electrophysiological signals poses a daunting and intricate challenge. Herein, an innovative MXene-based composite hydrogel (PBM hydrogel) with exceptional self-healing, self-adhesive, and versatile functionality is engineered through the integration of conductive MXene nanosheets into a well-structured poly(vinyl alcohol) (PVA) and bacterial cellulose (BC) hydrogel three-dimensional (3D) network, utilizing multiple dynamic cross-linking synergistic repeated freeze-thaw strategy. The hydrogel harnesses the presence of dynamically reversible borax ester bonds and multiple hydrogen bonds between its constituents, endowing it with rapid self-healing efficiency (97.8%) and formidable self-adhesive capability. The assembled PBM hydrogel epidermal sensor possesses a rapid response time (10 ms) and exhibits versatility in detecting diverse external stimuli and human movements such as vocalization, handwriting, joint motion, Morse code signals, and even monitoring infusion status. Additionally, the PBM hydrogel sensor offers the added advantage of swift degradation in phosphate-buffered saline solution (within a span of 56 days) and H2O2 solution (in just 53 min), maintaining an eco-friendly profile devoid of any environmental pollution. This work lays the groundwork for possible uses in electronic skins, interactions between humans and machines, and the monitoring of individualized healthcare.

Iontronic Dynamic Sensor with Broad Bandwidth and Flat Frequency Response Using Controlled Preloading Strategy

Rapid advancements in human-machine interaction and voice biometrics impose desirability on soft mechanical sensors for sensing complex dynamic signals. However, existing soft mechanical sensors mainly concern quasi-static signals such as pressure and pulsation for health monitoring, limiting their applications in emerging wearable electronics. Here, we propose a hydrogel-based soft mechanical sensor that enables recording a wide range of dynamic signals relevant to humans by combining a preloading design strategy and iontronic sensing mechanism. The proposed sensor offers a two-orders-of-magnitude larger working bandwidth (up to 1000 Hz) than most of the reported soft mechanical sensors and meanwhile provides a high sensitivity (-23 dB) that surpasses the common commercial microphone. The amplitude-frequency characteristic of the proposed sensor can be precisely tuned to meet the desired requirement by adjusting the preloads and the parameters of the microstructured hydrogel. The sensor is capable of recording instrumental sounds with high fidelity from simple pure tones to melodic songs. Demonstration of a skin-mountable sensor used for human-voice-based remote control of a toy car shows great potential for applications in the voice user interface of human-machine interactions.

Triple physical cross-linking cellulose nanofibers-based poly(ionic liquid) hydrogel as wearable multifunctional sensors

A novel triple physical cross-linking poly(ionic liquid) hydrogel, composed of poly(acrylamide-co-dodecyl methacrylate-co-1-vinyl-3-methyluracil-imidazolium chloride)/cellulose nanofibers-Ca2+ (PADV/CNFs-Ca2+), was synthesized through micellar-copolymerization followed by a solvent-soaked procedure. The synergistic interactions in polymer network (i.e. the hydrophobic association of dodecyl methacrylate moiety in surfactant micelles, the hydrogen bondings between imidazolium monomer segments and other monomer segments in polymers, and the ionic coordination between Ca2+ and -COO- on cellulose nanofibers surface) endowed the hydrogel with excellent mechanical properties, including high strength (754 kPa of tensile strength and 1905 kPa of compressive strength), outstanding stretchability (1963 %), elastic modulus (56.5 kPa) and remarkable mechanical durability (200 cycles with 500 % deformations and 100 cycles at 50 % compression strain). Besides, this hydrogel exhibited other advantages, such as satisfied conductivity (28.7 mS/cm), high strain/pressure/temperature-sensitive behavior, precise and stable signal transmission, varying degrees of antibacterial activity, and biocompatibility. Owing to the exceptional comprehensive performance, the hydrogel was then assembled as a multifunctional sensor to monitor the joint motion, vocal cord vibration, tactile sensation and body temperature with remarkable sensitivity in real time. This work offered a new strategy for the fabrication of durable, biocompatible, antibacterial and conductive materials for wearable multifunctional electronic devices.

All-dielectric absorber based on nano-graphite sheets/ionogels with configurable absorbing band

With the increasing complexity of the electromagnetic environment, there is a growing demand for the manipulation of electromagnetic waves, leading to the rapid development in configurable microwave absorbers. All-dielectric absorbers offer broadband and high-intensity absorption effects in microwave absorption and shielding. However, they face a significant challenge: their performance is not adjustable once the design is completed. In this study, we propose a solution to this problem by creating all-dielectric absorbers with flexibly configurable absorbing properties. We achieve this by designing a composite material of ionogels/nano-graphite sheets into compressible deformable absorbing units that can be molded into different shapes using 3D printing modes. The plasticity allows us to change the performance of the all-dielectric absorber, including the microwave absorption intensity, absorption peak, frequency bandwidths, and wide-angle absorption performance. With this approach, we can flexibly manipulate electromagnetic waves using all-dielectric absorbers through different plasticity models.

Self-compliant ionic skin by leveraging hierarchical hydrogen bond association

Robust interfacial compliance is essential for long-term physiological monitoring via skin-mountable ionic materials. Unfortunately, existing epidermal ionic skins are not compliant and durable enough to accommodate the time-varying deformations of convoluted skin surface, due to an imbalance in viscosity and elasticity. Here we introduce a self-compliant ionic skin that consistently works at the critical gel point state with almost equal viscosity and elasticity over a super-wide frequency range. The material is designed by leveraging hierarchical hydrogen bond association, allowing for the continuous release of polymer strands to create topological entanglements as complementary crosslinks. By embodying properties of rapid stress relaxation, softness, ionic conductivity, self-healability, flaw-insensitivity, self-adhesion, and water-resistance, this ionic skin fosters excellent interfacial compliance with cyclically deforming substrates, and facilitates the acquisition of high-fidelity electrophysiological signals with alleviated motion artifacts. The presented strategy is generalizable and could expand the applicability of epidermal ionic skins to more complex service conditions.

Hydrogen Bonds Reinforced Ionogels with High Sensitivity and Stable Autonomous Adhesion as Versatile Ionic Skins

Flexible wearable sensors have demonstrated enormous potential in various fields such as human health monitoring, soft robotics, and motion detection. Among them, sensors based on ionogels have garnered significant attention due to their wide range of applications. However, the fabrication of ionogels with high sensitivity and stable autonomous adhesion remains a challenge, thereby limiting their potential applications. Herein, we present an advanced ionogel (PACG-MBAA) with exceptional performances based on multiple hydrogen bonds, which is fabricated through one-step radical polymerization of N-acryloylglycine (ACG) in 1-ethyl-3-methylimidazolium ethyl sulfate (EMIES) in the presence of N,N'-methylenebis(acrylamide) (MBAA). Compared with the ionogel (PAA-MBAA) formed by polymerization of acrylic acid (AA) in EMIES, the resulting ionogel exhibits tunable mechanical strength (35-130 kPa) and Young's modulus comparable to human skin (60-70 kPa) owing to the multiple hydrogen bonds formation. Importantly, they demonstrate stable autonomous adhesion to various substrates and good self-healing capabilities. Furthermore, the ionogel-based sensor shows high sensitivity (with a gauge factor up to 6.16 in the tensile range of 300-700%), enabling the detection of both gross and subtle movements in daily human activities. By integration of the International Morse code, the ionogel-based sensor enables the encryption, decryption, and transmission of information, thus expanding its application prospects.

Hydrophobic deep eutectic solvent-based eutectogels for underwater sensing

Eutectogels derived from deep eutectic solvents (DESs) exhibit great potential for the fabrication of flexible sensors. However, the hygroscopicity of eutectogels hinders their applications in underwater sensing. In this work, a hydrophobic eutectogel with exceptional long-term underwater stability is produced through one-step polymerization of lauryl methacrylate and glycidyl methacrylate in a hydrophobic DES. The hydrophobic gel network and hydrophobic DES fulfill the eutectogel with outstanding water resistance (water contact angle > 110°) and excellent mechanical properties in an aqueous environment, thus leading to extraordinary durability (over 1000 testing cycles). Additionally, based on this eutectogel, underwater strain and pressure sensors with high sensitivity, rapid responsiveness, and superior durability were fabricated for accurate real-time monitoring of human activity. Furthermore, it has been demonstrated that the eutectogel sensor can transmit information through Morse code, performing as a wearable underwater communicator. This research provides an exemplary way for a demonstration method of hydrophobic eutectogel for durable underwater applications.

Preparation of tough and stiff ionogels via phase separation

Ionogels have the advantages of thermal stability, non-volatility, ionic conductivity and environmental friendliness, and they can be used in the field of flexible electronics and soft robotics. However, their poor mechanical strength and complex preparation methods limit their practical application. Herein, we propose a simple strategy to improve the performance of ionogels by adjusting their phase separation behavior. In a polymer-ionic liquid (IL) binary system with an upper critical solution temperature (UCST) and Berghmans' point, the phase separation behavior will be frozen below the temperature corresponding to the Berghmans' point, and thus, the degree of phase separation can be adjusted by controlling the cooling rate. We found that a polyacrylamide (PAM)-IL binary system possessed a UCST and Berghmans' point and the resulting ionogels had excellent mechanical properties. Their tensile strength, tensile modulus, compressive strength and compressive modulus reached 31.1 MPa, 319.8 MPa, 122 MPa and 1.7 GPa, respectively, while these properties of the other ionogels were generally less than 10 MPa. Furthermore, they were highly transparent, stretchable, stable and multifunctional.

Mechanochromic and ionic conductive cholesteric liquid crystal elastomers for biomechanical monitoring and human-machine interaction

Cholesteric liquid crystal elastomers (CLCEs) that combine rubbery elasticity with structural colour from self-assembled helical nanostructures are of paramount importance for diverse applications such as biomimetic skins, adaptive optics and soft robotics. Despite great advances, it is challenging to integrate electrical sensing and colour-changing characteristics in a single CLCE system. Here, we report the design and synthesis of an ionic conductive cholesteric liquid crystal elastomer (iCLCE) through in situ Michael addition and free-radical photopolymerization of CLCE precursors on silane-functionalized polymer ionic liquid networks, in which robust covalent chemical bonding was formed at the interface. Thanks to superior mechanochromism and ionic conductivity, the resulting iCLCEs exhibit dynamic colour-changing and electrical sensing functions in a wide range upon mechanical stretching, and can be used for biomechanical monitoring during joint bending. Importantly, a capacitive elastomeric sensor can be constructed through facilely stacking iCLCEs, where the optical and electrical dual-signal reporting performance allows intuitive visual localization of pressure intensity and distribution. Moreover, proof-of-concept application of the iCLCEs has been demonstrated with human-interactive systems. The research disclosed herein can provide new insights into the development of bioinspired somatosensory materials for emerging applications in diverse fields such as human-machine interaction, prostheses and intelligent robots.

Salt-Adaptively Conductive Ionogel Sensor for Marine Sensing

Hydrophobic ionogel has attracted much attention in underwater sensing as the artificial electronic skins and wearable sensors. However, when the low conductive ionogel-based sensor works in the marine environment, the salty seawater weakens its sensing performance, which is difficult to recognize. Herein, a salt-adaptively conductive ionogel with high submarine strain sensitivity is reported. Based on the preliminary improvement via the proton conduction mechanism, the conductivity of the ionogel further increases with the surrounding salinity rising up since the salt-induced dissociation phenomenon, which is described as the environmental salt-adaptive feature. In seawater, the conductivity of the ionogel is as high as 2.90 × 10-1 S m-1 . Significantly, with its long-term underwater stability and adhesion, the resultant ionogel-based sensor features prominent strain sensing performance (gauge factor: 1.12) while combining with various soft actuators in the marine environment. The ionogel-based sensor is capable of monitoring human breath frequency, human actions, and the locomotion of soft actuators, demonstrating its great potential in diving detection and intelligent preceptive soft robotics for marine environmental protection and exploration.

Peeling-Stiffening Self-Adhesive Ionogel with Superhigh Interfacial Toughness

Self-adhesive materials that can directly adhere to diverse solid surfaces are indispensable in modern life and technologies. However, it remains a challenge to develop self-adhesive materials with strong adhesion while maintaining its intrinsic softness for efficient tackiness. Here, a peeling-stiffening self-adhesive ionogel that reconciles the seemingly contradictory properties of softness and strong adhesion is reported. The ionogel contains two ionophilic repeating units with distinct associating affinities, which allows to adaptively wet rough surface in the soft dissipating state for adhering, and to dramatically stiffen to the glassy state upon peeling. The corresponding modulus increases by 117 times driven by strain-rate-induced phase separation, which greatly suppresses crack propagation and results in a super high interfacial toughness of 8046 J m-2 . The self-adhesive ionogel is also transparent, self-healable, recyclable, and can be easily removed by simple moisture treatment. This strategy provides a new way to design high-performance self-adhesive materials for intelligent soft devices.

Hydrogel-Based Sensors for Human-Machine Interaction

In the past decades, remarkable progress has been made in the field of human-machine interaction. The need for accurate sensing devices with satisfactory user experiences has propelled the development of flexible, stretchable, biocompatible, and imperceptible hydrogel-based interfaces. These innovative interfaces facilitate direct interactions between humans and machines while receiving detected input signals from sensors and giving output commands to controllers, thus motivating accurate real-time responsiveness. This Perspective discusses the sensing mechanisms for the two categories of hydrogel-based sensors and summarizes the recent progress in the development of different representations of human-machine interactions, including intelligent identification, information secrecy, interactive control, and virtual reality and augmented reality technologies. The advantages of hydrogel-based systems over conventionally used rigid electrical components are explicitly discussed. The conclusion provides a perspective on current challenges and outlines a future roadmap for the realization of state-of-the-art hydrogel-based smart systems.

High-sensitivity and ultralow-hysteresis fluorine-rich ionogel strain sensors for multi-environment contact and contactless sensing

Information transduction via soft strain sensors under harsh conditions such as marine, oily liquid, vacuum, and extreme temperatures without excess encapsulation facilitates modern scientific and military exploration. However, most reported soft strain sensors struggle to meet these requirements, especially in complex environments. Herein, a class of fluorine-rich ionogels with tunable ultimate strain, high conductivity, and multi-environment tolerance are designed. Abundant ion-dipole and dipole-dipole interactions lead to excellent miscibility between the hydrophobic ionic liquid and the fluorinated polyacrylate matrix, as well as adhesion to diverse substrates in amphibious environments. The ionogel-based sensors, even in encapsulation-free form, exhibit stable operation with a negligible hysteresis (as low as 0.119%) and high sensitivity (gauge factor of up to 6.54) under amphibious conditions. Multi-environment sensing instances in contact and even contactless forms are also demonstrated. This study opens the door for the artificial syntheses of multi-environment tolerance ionic skins with robust sensing applications in soft electronics and robotics.

Strong, Tough, and Anti-Swelling Supramolecular Conductive Hydrogels for Amphibious Motion Sensors

Conductive polymer hydrogels (CPHs) are widely employed in emerging flexible electronic devices because they possess both the electrical conductivity of conductors and the mechanical properties of hydrogels. However, the poor compatibility between conductive polymers and the hydrogel matrix, as well as the swelling behavior in humid environments, greatly compromises the mechanical and electrical properties of CPHs, limiting their applications in wearable electronic devices. Herein, a supramolecular strategy to develop a strong and tough CPH with excellent anti-swelling properties by incorporating hydrogen, coordination bonds, and cation-π interactions between a rigid conducting polymer and a soft hydrogel matrix is reported. Benefiting from the effective interactions between the polymer networks, the obtained supramolecular hydrogel has homogeneous structural integrity, exhibiting remarkable tensile strength (1.63 MPa), superior elongation at break (453%), and remarkable toughness (5.5 MJ m-3 ). As a strain sensor, the hydrogel possesses high electrical conductivity (2.16 S m-1 ), a wide strain linear detection range (0-400%), and excellent sensitivity (gauge factor = 4.1), sufficient to monitor human activities with different strain windows. Furthermore, this hydrogel with high swelling resistance has been successfully applied to underwater sensors for monitoring frog swimming and underwater communication. These results reveal new possibilities for amphibious applications of wearable sensors.