Development of Pure Green Thermally Activated Delayed Fluorescence Material by Cyano Substitution

Synergetic Multiple Charge-Transfer Excited States for Anti-Quenching and Rapid Spin-Flip Multi-Resonance Thermally Activated Delayed Fluorescence Emitter

The development of multiple resonances thermally activated delayed fluorescence (MR-TADF) emitters exhibiting high efficiency, narrowband emission, rapid reverse intersystem crossing rate (kRISC), and suppressed concentration quenching simultaneously is of great significance yet a formidable challenge. Herein, an effective strategy is presented to realize the above target by synergizing multiple charge-transfer excited states, including short-range charge transfer (SRCT), through-bond charge transfer (TBCT), and through-space charge transfer (TSCT). The proof-of-concept emitter 4tCz2B exhibits a bright green emission with a narrow full width at half maximum (FWHM) of 21 nm (0.10 eV) in solution, high photoluminescence quantum yield of 97%, fast kRISC of 7.8 × 105 s-1 and significantly suppressed concentration quenching in film state. As a result, the sensitizer-free organic light-emitting diodes (OLEDs) achieve maximum external quantum efficiencies (EQEmaxS) of over 34.5% together with an unaltered emission peak at 508 nm and FWHM of 26 nm at doping concentrations ranging from 3 to 20 wt.%. Even at a doping ratio of 50 wt.%, EQEmax is still as high as 25.5%. More importantly, the non-sensitized devices exhibit significantly reduced efficiency roll-offs, with a minimum value of 13.4% at a brightness of 1000 cd m-2.

Purely organic room-temperature phosphorescence sensitizers for highly efficient hyperfluorescence OLEDs

Multiresonance thermally activated delayed fluorescence (MR-TADF) emitters are promising candidates for organic light-emitting diodes (OLEDs) with high color quality. However, in most cases, noble metal-containing phosphors are required as sensitizers for MR-TADF emitters to improve their electroluminescence (EL) performances, which may lead to high cost and environmental pollution. Herein, an efficient purely organic room-temperature phosphorescence (RTP) material, 3,2-PIC-TXT, with fast phosphorescence radiation is developed. It not only exhibits impressive EL performances as an emitter with an outstanding external quantum efficiency (EQE) of 33.2%, higher than that of Ir(ppy)3 (25.2%), but also functions remarkably as a sensitizer for green MR-TADF emitters (BN2, tCzphB-Ph, and tCzphB-Fl). The hyperfluorescence OLEDs using 3,2-PIC-TXT as a sensitizer provide ultrahigh EQEs of 40.9 to 43.8%, superior to those based on an Ir(ppy)3 sensitizer (37.0 to 38.0%), along with superb color purity and excellent operational stability. These OLEDs are the best devices based on RTP materials reported so far.

Pressure-Induced Emission Enhancement of Multi-Resonance o-Carborane Derivatives via Exciton‒Vibration Coupling Suppression

Polycyclic multiple resonance (MR) molecules reveal narrowband emission, making them very promising emitters for high color purity display. Nevertheless, they still have challenges such as aggregation-induced emission quenching and spectral broadening. Overcoming these obstacles requires an in-depth understanding of the correlations among the alterations in their geometries, packing structures, and molecular vibrations and their corresponding changes in their photoluminescence (PL) properties. Herein, it is demonstrated that high-pressure infrared, UV-visible absorption, and fluorescence spectroscopies can be combined with computational results to elucidate the influence of the subtle structural variations on the exciton‒vibration couplings and their PL properties. An ortho-carborane-decorated MR emitter (BNC) is a piezochromic molecule and exhibits emission enhancement under high pressure. A thorough analysis of the in situ experimental measurements and calculated results reveals that the pressure-induced changes in the exciton binding energy and exciton‒vibration couplings are responsible for the unusual piezochromism. This research provides insights into the structure‒fluorescence relationship and potential for high-pressure techniques to optimize MR materials for advanced organic light-emitting diodes (OLEDs) applications.

Bifunctional Group Modulation Strategy Enables MR-TADF Electroluminescence Toward BT.2020 Green Light Standard

Herein, a parallel "bifunctional group" modulation method is proposed to achieve controlled modulation of the emission wavelength and full-width at half-maximum (FWHM) values. As a result, three proof-of-concept emitters, namely DBNDS-TPh, DBNDS-DFPh, and DBNDS-CNPh, are designed and synthesized, with the first functional dibenzo[b,d]thiophene unit concurrently reducing the bandgap and elevate their triplet state energy. A second functional group 1,1':3',1″-triphenyl, and electron acceptors 1,3-difluorobenzene and benzonitrile, respectively, to deepen the HOMO and LUMO levels. Accordingly, the CIE coordinates of DBNDS-TPh, DBNDS-DFPh, and DBNDS-CNPh are (0.13, 0.77), (0.14, 0.77), and (0.14, 0.76) respectively, in a dilute toluene solution. This marks the first instance of achieving a CIEy value of 0.77 in dilute toluene solutions. Significantly, the non-sensitized pure-green OLEDs based on DBNDS-TPh and DBNDS-DFPh demonstrate peak EQE of 35.0% and 34.5%, with corresponding CIE coordinates of (0.18, 0.75), (0.17, 0.76) at the doping concentration of 1 wt.%, representing the first green OLED with a CIEy value reaching 0.76 in a bottom-emitting device structure as reported in the literature.

Facile access to spirobifluorene-fused chiral multi-resonance materials with ultra-narrowband blue emission

Narrowband multiple resonance (MR) emitters with circularly polarized luminescence (CPL) hold significant promise for three dimension organic light-emitting diode (3D-OLED) displays. In this work, we present a simple method for developing a new type of 9,9'-spirobifluorene-based CP-MR emitters by a recrystallization resolution technology and chlorine (Cl)-directed electrophilic borylation reaction, both of which significantly enhance the efficiency and scalability for mass production. This approach allows for integrating an asymmetric 9,9'-spirobifluorene core between two MR frameworks to achieve optically active CP-MR emitters. The highly rigid spirobifluorene framework minimizes structural relaxation, and meanwhile, the introduction of a cyano (CN) group enhances the MR emission characteristics, leading to an ultra-narrowband blue emission with full width at half maximum (FWHM) of 14 nm. As a result, these molecules facilitate the assembly of narrowband blue CPL-OLEDs with a maximum external quantum efficiency (EQEmax) of 30.7% and an impressive narrow FWHM of 16 nm, representing the first instance of an FWHM below 20 nm in CPL-OLEDs.

Cyano-Modified Multi-Resonance Thermally Activated Delayed Fluorescent Emitters Towards Pure-Green OLEDs with a CIEy Value of 0.74

The development of pure-green organic emitters with ideal emission peaks and ultra-narrow full-widths at half-maximum (FWHMs) remains a formidable challenge. Herein, we report two new green emitters, CNBN and MCNBN, which achieve extremely narrow FWHMs by synergistic rigid π-extension and cyano-substitution of a sky-blue multi-resonance thermally activated delayed fluorescence (MR-TADF) core. The introduction of cyano groups induces red-shifts in the emission to the green region and dramatically minimizes the FWHMs. In toluene solution, CNBN and MCNBN exhibit narrowband emission with a maximum at 501 nm and 510 nm with ultra-narrow FWHMs of 14 nm/0.066 eV and 15 nm/0.071 eV, respectively. Given the near-unity photoluminescence quantum yields and almost 100 % horizontal dipole orientation, the electroluminescent (EL) devices based on CNBN and MCNBN deliver external quantum efficiencies (EQEs) exceeding 30 % with FWHMs of 16 nm/0.072 eV and 17 nm/0.080 eV, respectively. Notably, the MCNBN-based device achieves pure-green emission with a maximum at 517 nm with Commission Internationale de l'Éclairage coordinates of (0.17, 0.74), closely aligning with the BT.2020 green standard.

Multiple Resonance Quasi-fluorescence from BN-Doped Aromatic Compounds Modified with "Naphthalene" Units Approaches the BT.2020 Green Light Standard

Developing fluorophores that conform to the Broadcast Service Television 2020 (BT.2020) standard presents a formidable challenge. Here, we propose an innovative approach that integrates two and three-boron/nitrogen (BN2)-embedded [4]helicene subunits with naphthalene, resulting in the synthesis of two novel narrowband bright green quasi-fluorescent emitters, NT-2B and NT-3B for ultra-high-definition displays. These emitters exhibit minimal reorganization energy and Huang-Rhys factor, emitting at 510 and 511 nm in dilute toluene solution with exceptionally narrow full width at half maximum values of 15 and 14 nm, respectively. Notably, NT-2B demonstrates an impressive photoluminescence quantum yield of 92.5 %, rapid radiative decay rate, and slow non-radiative decay rate. Owing to their narrowband emission characteristics and outstanding optoelectronic properties, corresponding OLEDs based on NT-2B demonstrate a high external quantum efficiency of 30.6 %, with an FWHM value of 21.5 nm and a CIEy of 0.74, positioning it as one of the leading narrow-band green emitters.

Leveraging quinoxaline functionalization for the design of efficient orange/red thermally activated delayed fluorescence emitters

A novel functionalization approach of quinoxaline has been unveiled to develop orange/red thermally activated delayed fluorescence (TADF) emitters by modifying the core with three carbazole donors and one or three cyano acceptors. The resulting functionalized TADF emitters demonstrated orange and red emission with promising TADF properties. An organic light-emitting diode fabricated using the orange emitter demonstrated high external quantum efficiency of 18.4%.

High-Performance Narrowband Pure-Green OLEDs with Gamut Approaching BT.2020 Standard: Deuteration Promotes Device Efficiency and Lifetime Simultaneously

In order to fulfill the demand for ultrahigh definition organic light-emitting diodes (OLEDs), pure-green emitters with Commission Internationale de l'Éclairage (CIE) y-coordinate over 0.71 are in urgent demand. Meanwhile, the high device efficiency, small efficiency roll-off, and operational lifetime also remain challenging issues. In this work, a series of narrowband pure-green fluorescent emitters based on a double-boron (B) doped polycyclic aromatic hydrocarbons (PAHs) framework fused with naphthalene units is reported. The newly designed emitters realize green emission with peaks of 512-521 nm and extremely narrow full-width at half-maxima (FWHMs) of 16-17 nm in toluene solution. Utilizing these emitters in a phosphor-sensitized fluorescence (PSF) system, the resulting OLEDs exhibit pure green emission with peaks in the range of 514-526 nm and very narrow FWHMs of 19-20 nm. Notably, the devices based on the partially deuterated emitter, DBN-NaPh-d, not only achieve a maximum external quantum efficiency (EQEmax) as high as 35.2%, small efficiency roll-off, along with a CIEy of 0.74 but also showcase impressive operational stability with a long lifetime (LT50) of over 3000 h at an initial luminance of 1000 cd m-2. This work represents one of the highest device efficiencies and superior device stability among fluorescence emitter-based OLEDs.

The Golden Age of Thermally Activated Delayed Fluorescence Materials: Design and Exploitation

Since the seminal report by Adachi and co-workers in 2012, there has been a veritable explosion of interest in the design of thermally activated delayed fluorescence (TADF) compounds, particularly as emitters for organic light-emitting diodes (OLEDs). With rapid advancements and innovation in materials design, the efficiencies of TADF OLEDs for each of the primary color points as well as for white devices now rival those of state-of-the-art phosphorescent emitters. Beyond electroluminescent devices, TADF compounds have also found increasing utility and applications in numerous related fields, from photocatalysis, to sensing, to imaging and beyond. Following from our previous review in 2017 ( Adv. Mater. 2017, 1605444), we here comprehensively document subsequent advances made in TADF materials design and their uses from 2017-2022. Correlations highlighted between structure and properties as well as detailed comparisons and analyses should assist future TADF materials development. The necessarily broadened breadth and scope of this review attests to the bustling activity in this field. We note that the rapidly expanding and accelerating research activity in TADF material development is indicative of a field that has reached adolescence, with an exciting maturity still yet to come.

Host Engineering of Deep-Blue-Fluorescent Organic Light-Emitting Diodes with High Operational Stability and Narrowband Emission

The realization of highly operationally stable blue organic light-emitting diodes (OLEDs) is a challenge in both academia and industry. This paper describes the development of anthracene-dibenzofuran host materials, 2-(10-(naphthalen-1-yl)anthracen-9-yl)naphtho[2,3-b]benzofuran (Host 1) and 2-(10-([1,1'-biphenyl]-2-yl)anthracen-9-yl)naphtho[2,3-b]benzofuran (Host 2), namely for use in the emissive layer of an OLED stack. A multiple-resonance thermally activated delayed serves as the blue fluorescence emitter and exhibits an initial luminance of 1000 cd m-2 and long operational stability (i.e., time to decay to 90% of initial luminance) of 249 h. Furthermore, a deep-blue OLED with an optimized top-emitting architecture with a high current efficiency of 154.3 cd A-1, is fabricated and calibrated to a Commission International de l'Éclairage y chromaticity coordinate of 0.048. Moreover, the emission spectrum of this OLED has a narrowband peak at 476 nm with a full width at half maximum (FWHM) of 16 nm. This work provides valuable insights into the design of anthracene-based host materials and highlights the importance of host optimization in improving the operational stability of OLEDs.

Four-Membered Ring-Embedded Cycloarene Enabling Anti-Aromaticity and Ultra-Narrowband Emission

The synthesis of fully fused π-conjugated cycloarenes embedded with nonbenzenoid aromatics is challenging. In this work, the first example of four-membered ring-embedded cycloarene (MF2) was designed and synthesized in single-crystal form by macrocyclization and ring fusion strategies. For comparison, single bond-linked chiral macrocycle MS2 without two fused four-membered rings and its linear-shaped polycyclic benzenoid monomer L1 were also synthesized. The pronounced anti-aromaticity of four-membered rings significantly adjusts the electronic structures and photophysical properties of cycloarene, resulting in an enhancement of the photoluminescence quantum yield (PLQY) from 10.66 % and 10.74 % for L1 and MS2, respectively, to 54.05 % for MF2, which is the highest PLQY among the reported cycloarenes. Notably, owing to the embedded anti-aromatic four-membered rings that reduce structural displacements, MF2 exhibits an ultra-narrowband emission with a single-digit full-width at half-maximum (FWHM) of only 7 nm (0.038 eV), which sets a new record among all reported organic narrowband luminescent molecules, and represents the first example of ultra-narrowband emission in conventional polycyclic aromatic hydrocarbons (PAHs) devoid of heteroatoms.

MR-TADF liquid crystals: towards self assembling host-guest mixtures showing narrowband emission from the mesophase

Creating (room temperature) liquid crystalline TADF materials that retain the photophysical properties of the monomolecular TADF emitters remains a formidable challenge. The strong intramolecular interactions required for formation of a liquid crystal usually adversely affect the photophysical properties and balancing them is not yet possible. In this work, we present a novel host-guest approach enabling unperturbed, narrowband emission from an MR-TADF emissive core from strongly aggregated columnar hexagonal (Colh) liquid crystals. By modifying the DOBNA scaffold with mesogenic groups bearing alkoxy chains of different lengths, we created a library of Colh liquid crystals featuring phase ranges >100 K and room temperature mesomorphism. Expectedly, these exhibit broad excimer emission from their neat films, so we exploited their high singlet (S1 ∼2.9 eV) and triplet (T1 ∼2.5 eV) energies by doping them with the MR-TADF guest BCzBN. Upon excitation of the host, efficient Förster Resonance Energy Transfer (FRET) resulted in almost exclusive emission from BCzBN. The ability of the liquid crystallinity of the host to not be adversely affected by the presence of BCzBN is demonstrated as is the localization of the guest molecules within the aliphatic chain network of the host, resulting in extremely narrowband emission (FWHM = 14-15 nm). With this work we demonstrate a strategy for the self-assembly of materials with previously mutually incompatible properties in emissive liquid crystalline systems: strong aggregation in Colh mesophases, and narrowband emission from a MR-TADF core.

Spirobifluorene-fused strategy enables pure-green multiple resonance emitters with low efficiency roll-off

Herein, we present a molecular design strategy centered on the spiroannulation of the MR-core skeleton to fabricate green MR-emitters and reduce device efficiency roll-off. Fusing 9,9'-spirobifluorene into the central framework of MR-emitters facilitates the distribution of the highest occupied molecular orbital (HOMO) across the spiro units, leading to a red-shifted emission and giving rise to a pure-green MR-emitter (DPhCz-SFBN) with the Commission Internationale de l'Eclairage (CIE) coordinates of [0.16, 0.74] in toluene solution, closely matching the BT.2020 standard for green. Additionally, the resultant highly twisted hetero[6]helicene conformation and a nearly perpendicular conformation of spirocycle structure effectively minimize close π-π stacking interactions among the MR-emitting cores, thereby reducing exciton quenching. Consequently, organic light-emitting diodes (OLEDs) based on DPhCz-SFBN exhibit a high maximum quantum efficiency (EQEmax) of 32.8% with low efficiency roll-off, maintaining an EQE of 23.2% at a practical luminance level of 5000 cd m-2.

Regional Functionalization Molecular Design Strategy: A Key to Enhancing the Efficiency of Multi-Resonance OLEDs

Herein, we propose a regional functionalization molecular design strategy that enables independent control of distinct pivotal parameters through different molecule segments. Three novel multiple resonances thermally activated delayed fluorescence (MR-TADF) emitters A-BN, DA-BN, and A-DBN, have been successfully synthesized by integrating highly rigid and three-dimensional adamantane-containing spirofluorene units into the MR framework. These molecules form two distinctive functional parts: part 1 comprises a boron-nitrogen (BN)-MR framework with adjacent benzene and fluorene units forming a central luminescent core characterized by an exceptionally rigid planar geometry, allowing for narrow FWHM values; part 2 includes peripheral mesitylene, benzene, and adamantyl groups, creating a unique three-dimensional "umbrella-like" conformation to mitigate intermolecular interactions and suppress exciton annihilation. The resulting A-BN, DA-BN, and A-DBN exhibit remarkably narrow FWHM values ranging from 18 to 14 nm and near-unity photoluminescence quantum yields. Particularly, OLEDs based on DA-BN and A-DBN demonstrate outstanding efficiencies of 35.0 % and 34.3 %, with FWHM values as low as 22 nm and 25 nm, respectively, effectively accomplishing the integration of high color purity and high device performance.

10-Dibenzothiophenyl-9,9-diphenylacridane-based multiple resonance emitters for high-efficiency narrowband green OLEDs with CIE y > 0.7 at high doping concentrations

Multiple resonance emitters are attractive for high-color-purity organic light-emitting diodes (OLEDs) because of their unique narrowband emissions; however, they are typically used at low doping concentrations (≤15 wt%) due to aggregation-caused quenching and spectral broadening induced by planar molecular skeletons. Here, we report two multiple resonance emitters (BThPAc-1 and BThPAc-2) consisting of a 10-dibenzothiophenyl-9,9-diphenylacridane segment for efficient narrowband green emission at high doping concentrations. The dibenzothiophenyl-9,9-diphenylacridane segment contains two carbon-bridged phenyl rings as steric groups to inhibit intermolecular aggregation and a dibenzothiophene unit to extend conjugation and red-shift the emission to the green region. The resultant emitters exhibit narrowband emissions that peaked at 509-510 nm with a full width at half-maximum (FWHM) of 32 nm in 1 wt% doping films, which are maintained at less than 35 nm even in neat films. Remarkably, OLEDs employing the emitters reveal pure-green electroluminescence with a maximum external quantum efficiency of 20.3% and CIE coordinates of (0.18, 0.72) at 30 wt% doping concentration, which represents the best color coordinates for green multiple resonance OLEDs at high doping concentrations.

Predicting Emission Wavelengths in Benzobisoxazole-Based OLEDs with Gradient Boosted Ensemble Models

We demonstrate the use of gradient-boosted ensemble models that accurately predict emission wavelengths in benzobis[1,2-d:4,5-d']oxazole (BBO) based fluorescent emitters. We have curated a database of 50 molecules from previously published data by the Jeffries-EL group using density functional theory (DFT) computed ground and excited state features. We consider two machine learning (ML) models based on (i) whole cruciform molecules and (ii) their constituent fragment molecules. Both ML models provide accurate predictions with root-mean-square errors between 30 and 36 nm, competitive with state-of-the-art deep learning models trained on orders of magnitude more molecules, and this accuracy holds even when tested on four new BBO emitters unseen by the models. We also provide an interpretable feature importance analysis and discuss the relevant relationships between DFT and changes in predicted emission wavelength.

Expanding Multiple-Resonance Structure of a Double-Borylated Skeleton by Fusing with Indolocarbazole a Multiple-Resonance Donor for Narrowband Green Emission

Double-borylated multiple-resonance (MR) skeletons are promising templates for high performance, while the chemical design space is relatively limited. Peripheral segments are often used to decorate/fuse MR skeletons and modulate the photophysics but they can also cause unwanted spectral broadening. Herein, a narrowband MR emitter ICzDBA by fusing an MR-featured donor segment indolocarbazole into a double-borylated MR skeleton is developed. In ICzDBA, the nitrogen atom located away from the core benzene ring can also contribute to the generation of the overall MR-featured distribution through the long-range conjugation effect, along with the other boron/nitrogen atoms on the phenyl center. Thus, ICzDBA in toluene displays a narrowband emission peaking at 507 nm with a full width at half maximum of merely 20 nm (0.09 eV). Moreover, organic light-emitting diode devices using ICzDBA emitter exhibit ultrapure green emission with Commission Internationale de l'Eclairage (CIE) coordinates of (0.27, 0.70) and a high external quantum efficiency of 32.5%. These results manifest the importance of MR characters of peripheral decorations/fusions in preserving the narrowband features of MR skeletons, which provides a solution for further expanding MR structures with well-maintained narrowband characters.

A multi-resonance emitter with five-membered thiophene as the π-core enables efficient, narrowband and reduced efficiency roll-off OLEDs

Efficient, narrowband multi-resonance thermally activated delayed fluorescence (MR-TADF) emitters have recently sparked significant interest in high-resolution organic light-emitting diode (OLED) displays. However, almost all the progress in MR-TADF materials has been accomplished using a six-membered ring as the π-core to date. Herein, we present the first example of a five-membered ring π-core-based MR-TADF emitter named Th-BN developed by introducing thiophene instead of hexagonal benzene as the π-core. The introduction of thiophene significantly enhances intramolecular charge transfer intensity and the spin-orbit coupling matrix elements but does not change the intrinsic MR properties. As a result, Th-BN exhibits a narrowband green emission at 512 nm, with a high luminous efficiency of 97%, a narrow full-width at half maximum of 41 nm/0.20 eV, and a rapid reverse intersystem crossing rate of 18.7 × 104 s-1, which is 10 times higher than that of its benzenoid counterpart DtBuCzB. The corresponding green OLEDs based on Th-BN achieve excellent electroluminescence performance with an external quantum efficiency (EQE) of 34.6% and a reduced efficiency roll-off with an EQE of 26.8% at a high luminance of 1000 cd m-2.

Unveiling the photophysical and excited state properties of multi-resonant OLED emitters using combined DFT and CCSD method

Multi-resonance thermally-activated delayed fluorescence (MR-TADF) is predominantly observed in organoboron heteroatom-embedded molecules, featuring enhanced performance in organic light-emitting diodes (OLEDs) with high color purity, chemical stability, and excellent photoluminescence quantum yields. However, predicting the impact of any chemical change remains a challenge. Computational methods including density functional theory (DFT) still require accurate descriptions of photophysical properties of MR-TADF emitters. To circumvent this drawback, we explored recent investigations on the CzBX (Cz = carbazole, X = O, S, or Se) molecule as a central building block. We constructed a series of MR-TADF molecules by controlling chalcogen atom embedding, employing a combined approach of DFT and coupled-cluster (CCSD) methods. Our predicted results for MR-TADF emitter molecules align with the reported experimental data in the literature. The variation in the positions of chalcogen atoms embedded within the CzBX2X framework imparts unique photophysical properties.

Efficient Deep-Blue Multiple-Resonance Emitters Based on Azepine-Decorated ν-DABNA for CIEy below 0.06

Ultrapure deep-blue emitters are in high demand for organic light-emitting diodes (OLEDs). Although color coordinates serve as straightforward parameters for assessing color purity, precise control over the maximum wavelength and full-width at half-maximum is necessary to optimize OLED performance, including luminance efficiency and luminous efficacy. Multiple-resonance (MR) emitters are promising candidates for achieving ideal luminescence properties; consequently, a wide variety of MR frameworks have been developed. However, most of these emitters experience a wavelength displacement from the ideal color, which limits their practical applicability. Therefore, a molecular design that is compatible with MR emitters for modulating their energy levels and color output is particularly valuable. Here, it is demonstrated that the azepine donor unit induces an appropriate blue-shift in the emission maximum while maintaining efficient MR characteristics, including high photoluminescence quantum yield, narrow emission, and a fast reverse intersystem crossing rate. OLEDs using newly developed MR emitters based on the ν-DABNA framework simultaneously exhibit a high quantum efficiency of ≈30%, luminous efficacy of ≈20 lm W-1, exceptional color purity with Commission Internationale de l'Éclairage coordinates as low as (0.14, 0.06), and notably high operational stability. These results demonstrate unprecedentedly high levels compared with those observed in previously reported deep-blue emitters.

B‒N covalent bond-involved π-extension of multiple resonance emitters enables high-performance narrowband electroluminescence

Multi-boron-embedded multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters show promise for achieving both high color-purity emission and high exciton utilization efficiency. However, their development is often impeded by a limited synthetic scope and excessive molecular weights, which challenge material acquisition and organic light-emitting diode (OLED) fabrication by vacuum deposition. Herein, we put forward a B‒N covalent bond-involved π-extension strategy via post-functionalization of MR frameworks, leading to the generation of high-order B/N-based motifs. The structurally and electronically extended π-system not only enhances molecular rigidity to narrow emission linewidth but also promotes reverse intersystem crossing to mitigate efficiency roll-off. As illustrated examples, ultra-narrowband sky-blue emitters (full-width at half-maximum as small as 8 nm in n-hexane) have been developed with multi-dimensional improvement in photophysical properties compared to their precursor emitters, which enables narrowband OLEDs with external quantum efficiencies (EQEmax) of up to 42.6%, in company with alleviated efficiency decline at high brightness, representing the best efficiency reported for single-host OLEDs. The success of these emitters highlights the effectiveness of our molecular design strategy for advanced MR-TADF emitters and confirms their extensive potential in high-performance optoelectronic devices.

Highly efficient multi-resonance thermally activated delayed fluorescence material toward a BT.2020 deep-blue emitter

An ultrapure deep-blue multi-resonance-induced thermally activated delayed fluorescence material (DOB2-DABNA-A) is designed and synthesized. Benefiting from a fully resonating extended helical π-conjugated system, this compound has a small ΔEST value of 3.6 meV and sufficient spin-orbit coupling to exhibit a high-rate constant for reverse intersystem crossing (kRISC = 1.1 × 106 s-1). Furthermore, an organic light-emitting diode employing DOB2-DABNA-A as an emitter is fabricated; it exhibits ultrapure deep-blue emission at 452 nm with a small full width at half maximum of 24 nm, corresponding to Commission Internationale de l'Éclairage (CIE) coordinates of (0.145, 0.049). The high kRISC value reduces the efficiency roll-off, resulting in a high external quantum efficiency (EQE) of 21.6% at 1000 cd m-2.

Organoboron-based multiple-resonance emitters: synthesis, structure-property correlations, and prospects

Boron-based multiple-resonance (MR) emitters exhibit the advantages of narrowband emission, high absolute photoluminescence quantum yield, thermally activated delayed fluorescence (TADF), and sufficient stability during the operation of organic light-emitting diodes (OLEDs). Thus, such MR emitters have been widely applied as blue emitters in triplet-triplet-annihilation-driven fluorescent devices used in smartphones and televisions. Moreover, they hold great promise as TADF or terminal emitters in TADF-assisted fluorescence or phosphor-sensitised fluorescent OLEDs. Herein we comprehensively review organoboron-based MR emitters based on their synthetic strategies, clarify structure-photophysical property correlations, and provide design guidelines and future development prospects.

Efficient, narrow-band, and stable electroluminescence from organoboron-nitrogen-carbonyl emitter

Organic light-emitting diodes (OLEDs) exploiting simple binary emissive layers (EMLs) blending only emitters and hosts have natural advantages in low-cost commercialization. However, previously reported OLEDs based on binary EMLs hardly simultaneously achieved desired comprehensive performances, e.g., high efficiency, low efficiency roll-off, narrow emission bands, and high operation stability. Here, we report a molecular-design strategy. Such a strategy leads to a fast reverse intersystem crossing rate in our designed emitter h-BNCO-1 of 1.79×105 s-1. An OLED exploiting a binary EML with h-BNCO-1 achieves ultrapure emission, a maximum external quantum efficiency of over 40% and a mild roll-off of 14% at 1000 cd·m-2. Moreover, h-BNCO-1 also exhibits promising operational stability in an alternative OLED exploiting a compact binary EML (the lifetime reaching 95% of the initial luminance at 1000 cd m-2 is ~ 137 h). Here, our work has thus provided a molecular-design strategy for OLEDs with promising comprehensive performance.

Indolo[3,2-b]indole-based multi-resonance emitters for efficient narrowband pure-green organic light-emitting diodes

Organic light-emitting diodes (OLEDs) utilizing multi-resonance (MR) emitters show great potential in ultrahigh-definition display benefitting from superior merits of MR emitters such as high color purity and photoluminescence quantum yields. However, the scarcity of narrowband pure-green MR emitters with novel backbones and facile synthesis has limited their further development. Herein, two novel pure-green MR emitters (IDIDBN and tBuIDIDBN) are demonstrated via replacing the carbazole subunits in the bluish-green BCzBN skeleton with new polycyclic aromatic hydrocarbon (PAH) units, 5-phenyl-5,10-dihydroindolo[3,2-b]indole (IDID) and 5-(4-(tert-butyl)phenyl)-5,10-dihydroindolo[3,2-b]indole (tBuIDID), to simultaneously enlarge the π-conjugation and enhance the electron-donating strength. Consequently, a successful red shift from aquamarine to pure-green is realized for IDIDBN and tBuIDIDBN with photoluminescence maxima peaking at 529 and 532 nm, along with Commission Internationale de l'Eclairage (CIE) coordinates of (0.25, 0.71) and (0.28, 0.70). Furthermore, both emitters revealed narrowband emission with small full width at half-maximum (FWHM) below 28 nm. Notably, the narrowband pure-green emission was effectively preserved in corresponding devices, which afford elevated maximum external quantum efficiencies of 16.3% and 18.3% for IDIDBN and tBuIDIDBN.

Cost-Effective Approach for Modeling of Multiresonant Thermally Activated Delayed Fluorescence Emitters

Multiresonant thermally activated delayed fluorescence (MR-TADF) emitters have recently attracted great interest for application in organic light-emitting diodes due to their remarkable electroluminescent efficiency and narrow emission spectra. It is therefore essential to establish computational methodologies that can accurately model the excited states of these materials at manageable computational costs. With regard to MR-TADF design and their associated photophysics, previous works have highlighted the importance of wave function-based methods, at much higher computational costs, over the traditional time-dependent density functional theory approach. Herein, we employ two independent techniques built on different quantum mechanical frameworks, highly correlated wave function-based STEOM-DLPNO-CCSD and range-separated double hybrid density functional, TD-B2PLYP, to investigate their performance in predicting the excited state energies in MR-TADF emitters. We demonstrate a remarkable mean absolute deviation (MAD) of ∼0.06 eV in predicting ΔEST compared to experimental measurements across a large pool of chemically diverse MR-TADF molecules. Furthermore, both methods yield superior MAD in estimating S1 and T1 energies over earlier reported SCS-CC2 computed values [J. Chem. Theory Comput. 2022, 18, 4903]. The short-range charge-transfer nature of low-lying excited states and narrow fwhm values, hallmarks of this class of emitters, are precisely captured by both approaches. Finally, we show the transferability and robustness of these methods in estimating rates of radiative and nonradiative events with adequate agreement against experimental measurements. Implementing these cost-effective computational approaches is poised to streamline the identification and evaluation of potential MR-TADF emitters, significantly reducing the reliance on costly laboratory synthesis and characterization processes.

Constructing Multiresonance Thermally Activated Delayed Fluorescence Emitters for Organic LEDs: A Computational Investigation

Multiple resonance thermally activated delayed fluorescence (MR-TADF) materials have acquired substantial attention due to their high electroluminescence efficiency with narrow emission spectra. However, the existing MR-TADF emitters suffer from substantial efficiency roll-off due to insufficient rate constants of the reverse intersystem crossing (kRISC) process compared to the traditional TADF materials. Herein, we employ the DLPNO-STEOM-CCSD method, which is computationally less expensive than the wave function-based EOM-CCSD method, to evaluate the electronic and photophysical properties of MR-TADF materials accurately. The predicted singlet-triplet energy gap (ΔEST), one of the critical parameters governing the TADF efficiency, exhibits remarkable agreement with the experimental measurement, with a standard deviation value of 0.026 eV (obtained based on five experimentally synthesized MR-TADF systems). The proposed technique was utilized to determine the suitability of 15 newly designed MR-TADF emitters via their computed radiative and nonradiative rates, luminescence efficiencies, and exciton characteristics. Moreover, most conceived molecules exhibit blue emission with decent to strong oscillator strengths, making them potential candidates for practical light-emitting applications. The proposed computational route will undoubtedly accelerate the designing and prescreening of potential MR-TADF emitters before their expensive laboratory synthesis and characterization.

Carbazole-Decorated Organoboron Emitters with Low-Lying HOMO Levels for Solution-Processed Narrowband Blue Hyperfluorescence OLED Devices

The hyperfluorescence has drawn great attention in achieving efficient narrowband emitting devices based on multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters. However, achieving efficient solution-processed pure blue hyperfluorescence devices is still a challenge, due to the unbalanced charge transport and serious exciton quenching caused by that the holes are easily trapped on the high-lying HOMO (the highest occupied molecular orbital) level of traditional diphenylamine-decorated emitters. Here, we developed two narrowband blue organoboron emitters with low-lying HOMO levels by decorating the MR-TADF core with weakly electron-donating carbazoles, which could suppress the hole trapping effect by reducing the hole traps between host and MR-TADF emitter from deep (0.40 eV) to shallow (0.14/0.20 eV) ones for facilitating hole transport and exciton formation, as well as avoiding exciton quenching. And the large dihedral angle between the carbazole and MR-TADF core makes the carbazole act as a steric hindrance to inhibit molecular aggregation. Accordingly, the optimized solution-processed pure blue hyperfluorescence devices simultaneously realize record external quantum efficiency of 29.2 %, narrowband emission with a full-width at half-maximum of 16.6 nm, and pure blue color with CIE coordinates of (0.139, 0.189), which is the best result for the solution-processed organic light-emitting diodes based on MR-TADF emitters.

Naphthalene-Embedded Multi-Resonance Emitters Enabling Efficient Narrow Emissive Blue OLEDs

Great achievements have been made in the development of organic light-emitting diodes in recent decades. However, achieving high color purity for blue emitters remains a challenge. In this study, we have designed and synthesized three naphthalene (NA)-embedded multi-resonance (MR) emitters, named SNA, SNB and SNB1, based on N-B-O frameworks with isomer variations for finely adjusting the photophysical properties. These emitters show tunable blue emission with emission peaks of 450-470 nm. Small full width of half maximum (FWHM) of 25-29 nm are achieved in these emitters, indicating the well maintaining of molecular rigidity and MR effect with NA extension. Such design also ensures a fast radiative decay. However, no obvious delayed fluorescence is observed in all three emitters due to the relatively large energy differences between the first singlet and triplet excited states. Both SNA and SNB enable high electroluminescent (EL) performance in doped devices with external quantum efficiency (EQE) of 7.2 and 7.9 %, respectively. When applying the sensitized strategy, devices based on SNA and SNB show huge improvement with EQE of 29.3 and 29.1 %. More importantly, SNB with twist geometry enables stable EL spectra with almost unchanged FWHM under different doping concentrations. This work demonstrates the potential of NA extension design in constructing narrowband emissive blue emitters.

Aza-dicyclopenta[a,g]naphthalenes: controllable seesaw-like emissive behavior and narrowband AIEgens

Molecular motions significantly influence the emissive behavior and properties of organic fluorescent molecules. However, achieving controllable emission remains a major challenge for fluorophores. In the case of aggregation-induced emission luminogens (AIEgens), the desired properties of aggregated emission and narrowband spectrum demand molecular motion patterns that inherently oppose each other. A nitrogen-containing dicyclopenta[a,g]naphthalene scaffold was discovered as a controllable luminogenic structure through a highly efficient one-step intermolecular cascade reaction. By carefully balancing molecular motions and introducing additional nitrogen atoms into the skeleton, pyrrole-conjugated dicyclopenta[a,g]naphthalenes with aggregation-caused quenching (ACQ) could be transformed into dual-state emission luminogens (DSEgens). This transformation was achieved by incorporating an additional weak H-bond "lock." Furthermore, the DSEgens could be converted into AIEgens with an exciting narrow full-width-at-half-maximum (FWHM, <50 nm) by methylation. This unprecedented discovery is attributed to the contribution of the weak H-bond "lock," which overcomes the limitations of broad band emission in AIEgens caused by restrictions of intramolecular motion. Specific organelle probes were developed by replacing the methyl group of the onium product with different positioning groups. This study emphasizes the delicate balance of molecular motions in controlling luminescence and demonstrates a successful approach to designing organic luminogens with controllable emission and narrowband AIEgens.

An In-Situ Cyanidation Strategy To Access Tetracyanodiacenaphthoanthracene Diimides with High Electron Mobilities Exceeding 10 cm2 V-1 s-1

A family of novel highly π-extended tetracyano-substituted acene diimides, named as tetracyanodiacenaphthoanthracene diimides (TCDADIs), have been synthesized using a facile four-fold Knoevenagel condensation strategy. Unlike conventional cyano substitution reactions, our approach enables access to a large π-conjugated backbone with the in-situ formation of four cyano substitutents at room temperature while avoiding extra cyano-functionalization reactions. TCDADIs decorated with different N-alkyl substituents present good solubility, near-coplanar backbones, good crystallinity, and low-lying lowest unoccupied molecular orbital energies of -4.33 eV, all of which contribute to desirable electron-transport performance when applied in organic field-effect transistors (OFET). The highest electron mobility of an OFET based on a 2-hexyldecyl-substituted TCDADI single crystal reaches 12.6 cm2  V-1  s-1 , which is not only among the highest values for the reported n-type organic semiconductor materials (OSMs) but also exceeds that of most n-type OSMs decorated with imide units.

Orbital Symmetry Engineering in Fused Polycyclic Heteroaromatics toward Extremely Narrowband Green Emissions with an FWHM of 13 nm

Multiresonance (MR) molecules generally face spectral broadening issues with redshifted emissions. Thus, green emitters with full widths at half maximum (FWHMs) of <20 nm are rarely reported, despite being highly desired. Herein, by properly fusing indolo(3,2,1-jk)carbazole (ICZ) and naphthalene moieties, green MR emitters are reported, which have FWHMs of merely 13 nm (0.064 eV) and 14 nm (0.069 eV) in dichloromethane, accompanied by high photoluminescence quantum yields of >95%, which represent not only the smallest FWHMs among all green MR emitters but also the first green emitters based on ICZ MR derivatives. Theoretical studies reveal that the orbital interactions between the antisymmetric sites of the segments play an important role in extending the conjugation length in the fusion architectures while simultaneously maintaining a small FWHM. The corresponding organic light-emitting diodes exhibit green emission peaks at 508-509 nm and the first green electroluminescence FWHM of <20 nm ever reported. Benefiting from the preferential horizontal dipole orientation, a high maximum external quantum efficiency of up to 30.9% is obtained, which remains at 28.9% and 23.2% under luminances of 1000 and 10 000 cd m^-2 , respectively, outperforming most reported green devices based on narrowband emitters.

Energy-Efficient Stable Hyperfluorescence Organic Light-Emitting Diodes with Improved Color Purities and Ultrahigh Power Efficiencies Based on Low-Polar Sensitizing Systems

Multi-resonance (MR) molecules with thermally activated delayed fluorescence (TADF) are emerging as promising candidates for high-definition displays because of their narrow emission spectra. However, the electroluminescence (EL) efficiencies and spectra of MR-TADF molecules are highly sensitive to hosts and sensitizers when applied to organic light-emitting diodes (OLEDs), and the highly polar environments in devices often lead to significantly broadened EL spectra. In this study, a proof-of-concept TADF sensitizer (BTDMAC-XT) with low polarity, high steric hindrance, and concentration-quenching free feature is constructed, which acts as a good emitter in doped and non-doped OLEDs with high external quantum efficiencies (η_ext s) of 26.7% and 29.3%, respectively. By combining BTDMAC-XT with conventional low-polarity hosts, low-polarity sensitizing systems with a small carrier injection barrier and full exciton utilization are constructed for the MR-TADF molecule BN2. Hyperfluorescence (HF) OLEDs employing the low-polar sensitizing systems successfully improve the color quality of BN2 and afford an excellent η_ext of 34.4%, a record-high power efficiency of 166.3 lm W^-1 and a long operational lifetime (LT₅₀  = 40309 h) at an initial luminance of 100 cd m^-2 . These results provide instructive guidance for the sensitizer design and device optimization for energy-efficient and stable HF-OLEDs with high-quality light.

Thermally Enhanced and Long Lifetime Red TADF Carbon Dots via Multi-Confinement and Phosphorescence Assisted Energy Transfer

Thermally activated delayed fluorescence (TADF) materials, which can harvest both singlet and triplet excitons for high-efficiency emission, have attracted widespread concern for their enormous applications. Nevertheless, luminescence thermal quenching severely limits the efficiency and operating stability in TADF materials and devices at high temperature. Herein, a surface engineering strategy is adopted to obtain unique carbon dots (CDs)-based thermally enhanced TADF materials with ≈250% enhancement from 273 to 343 K via incorporating seed CDs into ionic crystal network. The rigid crystal network can simultaneously boost reverse intersystem crossing process via enhancing spin-orbit coupling between singlet and triplet states and suppressing non-radiative transition rate, contributing to the thermally enhanced TADF character. Benefiting from efficient energy transfer from triplet states of phosphorescence center to singlet states of CDs, TADF emission at ≈600 nm in CDs displays a long lifetime up to 109.6 ms, outperforming other red organic TADF materials. Thanks to variable decay rates of the delayed emission centers, time and temperature-dependent delayed emission color has been first realized in CDs-based delayed emission materials. The CDs with thermally enhanced and time-/temperature-dependent emission in one material system can offer new opportunities in information protection and processing.

Resonance-Enhanced Emission Effects toward Dual-State Emissive Bright Red and Near-Infrared Emitters

Resonance-enhanced emission (REE) effect was discovered and lead to a novel dye family of hydrostyryl pyridinium derivatives in our recent work. Herein, the REE effect was employed to design a red and near-infrared dual-state emissive fluorophore family of SW-OH-NO₂ derivatives which were easily synthesized by coupling an electron-withdrawing group (W) onto nitro(hydroxyl)styryl (S-OH-NO₂ ) through a C=C double bond as π-bridge. The deprotonation of a phenolic hydroxyl group promoted by a nitro group and the electron-withdrawing group (W) on the other side of the π-bridge triggered resonance, resulting in significantly red-shifted emission. All the resultant SW-OH-NO₂ compounds showed excellent dual-state emission behavior. Remarkably, hydrostyryl quinolinium (SQ-OH-NO₂ ) is one of the smallest NIR emitter molecular skeleton (λ_em =725 nm, MW<400) and showed dual-state emission characteristics and obvious viscosity-depended fluorescent behaviors. In addition to constructing electron donor-acceptor structures and prolonging π-bridges, the REE effect promises a reliable strategy toward novel fluorophores with small size, long emissive wavelength, and dual-emission characteristics, and importantly, feasible industrial manufactures and applications due to their easy and low-cost synthesis strategy.

Medium-Ring Strategy Enables Multiple Resonance Emitters with Twisted Geometry and Fast Spin-Flip to Suppress Efficiency Roll-Off

Suppressing aggregation-caused quenching (ACQ) effect and reducing device efficiency roll-off are both crucial yet challenging for multi-resonance (MR) emitters. Herein, we put forward a medium-ring strategy to design efficient MR emitters that feature heptagonal tribenzo[b,d,f]azepine (TBA) donors. The highly twisted conformation enlarges the intermolecular distances between the MR-emitting cores, and thus suppresses ACQ effect. Meanwhile, the introduction of heptagonal donors enhances spin-orbital coupling, so as to accelerate reverse intersystem crossing (RISC) process. This medium-ring strategy gives rise to the first example of blue MR emitter that simultaneously possesses radiative decay rate as fast as 10⁸  s^-1 and RISC rate as fast as 10⁶  s^-1 . Accordingly, DTBA-B2N3 enables to assemble high-performance blue organic light-emitting diodes (OLEDs) with maximum external quantum efficiency (EQE_max ) of 30.9 % and alleviated efficiency roll-off (EQE₁₀₀₀ : 20.5 %).

Solution-Processable Pure-Red Multiple Resonance-induced Thermally Activated Delayed Fluorescence Emitter for Organic Light-Emitting Diode with External Quantum Efficiency over 20

Developing solution-processable red organic light-emitting diodes (OLEDs) with high color purity and efficiency based on multiple resonance thermally activated delayed fluorescence (MR-TADF) is a formidable challenge. Herein, by introducing auxiliary electron donor and acceptor moieties into the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) distributed positions of multiple resonance skeleton simultaneously, an effective strategy to obtain red MR-TADF emitters was represented. The proof-of-the-concept molecule BN-R exhibits a narrowband pure-red emission at 624 nm, with a high luminous efficiency of 94 % and a narrow bandwidth of 46 nm. Notably, the fabricated solution-processable pure-red OLED based on BN-R exhibits a state-of-the-art external quantum efficiency over 20 % with the Commission Internationale de I'Éclairage coordinates of (0.663, 0.337) and a long operational lifetime (LT₅₀ ) of 1088 hours at an initial luminance of 1000 cd m^-2 .

Sequential Multiple Borylation Toward an Ultrapure Green Thermally Activated Delayed Fluorescence Material

Multiple-resonance thermally activated delayed fluorescence (MR-TADF) emitters have emerged as an important component of organic light-emitting diodes (OLEDs) because of their narrowband emission and high exciton utilization efficiency. However, the chemical space of MR-TADF emitters remains mostly unexplored because of the lack of suitable synthetic protocols. Herein, we demonstrate a sequential multiple borylation reaction that provides new synthetically accessible chemical space. ω-DABNA, the proof-of-concept material, exhibited narrowband green TADF with a full width at half-maximum of 22 nm and a small singlet-triplet energy gap of 13 meV. The OLED employing it as an emitter exhibited electroluminescence at 512 nm, with Commission International de l'Éclairage coordinates of (0.13, 0.73) and a high external quantum efficiency (EQE) of 31.1%. Moreover, the device showed minimum efficiency roll-off, with an EQE of 29.4% at 1000 cd m^-2.

Carbonyl (CO)/N-based thermally activated delayed fluorescent materials with high efficiency and fast reverse intersystem crossing rate: a theoretical design and study

Two novel highly efficient organic TADF materials based on MR structures have been theoretically designed and investigated.

Recent Progress in Blue Thermally Activated Delayed Fluorescence Emitters and Their Applications in OLEDs: Beyond Pure Organic Molecules with Twist D-π-A Structures

Thermally activated delayed fluorescence (TADF) materials, which can harvest all excitons and emit light without the use of noble metals, are an appealing class of functional materials emerging as next-generation organic electroluminescent materials. Triplet excitons can be upconverted to the singlet state with the aid of ambient thermal energy under the reverse inter-system crossing owing to the small singlet-triplet splitting energy (ΔE_ST). This results from a specific molecular design consisting of minimal overlap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital, due to the spatial separation of the electron-donating and electron-releasing part. When a well-designed device structure is applied, high-performance blue-emitting TADF organic light-emitting diodes can be realized with an appropriate molecular design. Unlike the previous literature that has reviewed general blue-emitting TADF materials, in this paper, we focus on materials other than pure organic molecules with twist D-π-A structures, including multi-resonance TADF, through-space charge transfer TADF, and metal-TADF materials. Cutting-edge molecules with extremely small and even negative ΔE_ST values are also introduced as candidates for next-generation TADF materials. In addition, OLED structures used to exploit the merits of the abovementioned TADF emitters are also described in this review.

Ultra-Narrowband Blue Multi-Resonance Thermally Activated Delayed Fluorescence Materials

Ultra-narrowband blue multi-resonance-induced thermally activated delayed fluorescence (MR-TADF) materials (V-DABNA and V-DABNA-F), consisting of three DABNA subunits possessing phenyl or 2,6-difluorophenyl substituents on the peripheral nitrogen atoms are synthesized by one-shot triple borylation. Benefiting from the inductive effect of fluorine atoms, the emission maximum of V-DABNA-F (464 nm) is blueshifted from that of the parent V-DABNA (481 nm), while maintaining a small full width at half maximum (FWHM, 16 nm) and a high rate constant for reverse intersystem crossing (6.5 × 105 s-1 ). The organic light-emitting diodes (OLEDs) using V-DABNA and V-DABNA-F as emitters are fabricated by vapor deposition and exhibit blue emission at 483 and 468 nm with small FWHMs of 17 and 15 nm, corresponding to Commission Internationale d'Éclairage coordinates of (0.09, 0.27) and (0.12, 0.10), respectively. Both devices achieve high external quantum efficiencies of 26.2% and 26.6% at the maximum with minimum efficiency roll-offs of 0.9% and 3.2%, respectively, even at 1000 cd m-2 , which are record-setting values for blue MR-TADF OLEDs.

Double boron-embedded multiresonant thermally activated delayed fluorescent materials for organic light-emitting diodes

The subclass of multi resonant thermally activated delayed fluorescent emitters (MR-TADF) containing boron atoms has garnered significant attention in the field of organic light emitting diode (OLED) research. Among boron-based MR-TADF emitters, double boron-embedded MR-TADF (DB-MR-TADF) emitters show excellent electroluminescence performances with high photoluminescence quantum yields, narrow band emission, and beneficially small singlet-triplet energy levels in all the full-color gamut regions. This article reviews recent progress in DB-MR-TADF emitters, with particular attention to molecular design concepts, synthetic routes, optoelectronic properties, and OLED performance, giving future prospects for real-world applications.