Recent Progress in Inkjet-Printed Thin-Film Transistors

Recent Research on Preparation and Application of Smart Joule Heating Fabrics

Multifunctional wearable heaters have attracted much attention for their effective applications in personal thermal management and medical therapy. Compared to passive heating, Joule heating offers significant advantages in terms of reusability, reliable temperature control, and versatile coupling. Joule-heated fabrics make wearable electronics smarter. This review critically discusses recent advances in Joule-heated smart fabrics, focusing on various fabrication strategies based on material-structure synergy. Specifically, various applicable conductive materials with Joule heating effect are first summarized. Subsequently, different preparation methods for Joule heating fabrics are compared, and then their various applications in smart clothing, healthcare, and visual indication are discussed. Finally, the challenges faced in developing these smart Joule heating fabrics and their possible solutions are discussed.

Seamless Integration of Conducting Hydrogels in Daily Life: From Preparation to Wearable Application

Conductive hydrogels (CHs) have received significant attention for use in wearable devices because they retain their softness and flexibility while maintaining high conductivity. CHs are well suited for applications in skin-contact electronics and biomedical devices owing to their high biocompatibility and conformality. Although highly conductive hydrogels for smart wearable devices are extensively researched, a detailed summary of the outstanding results of CHs is required for a comprehensive understanding. In this review, the recent progress in the preparation and fabrication of CHs is summarized for smart wearable devices. Improvements in the mechanical, electrical, and functional properties of high-performance wearable devices are also discussed. Furthermore, recent examples of innovative and highly functional devices based on CHs that can be seamlessly integrated into daily lives are reviewed.

Programmable and Modularized Gas Sensor Integrated by 3D Printing

The rapid advancement of intelligent manufacturing technology has enabled electronic equipment to achieve synergistic design and programmable optimization through computer-aided engineering. Three-dimensional (3D) printing, with the unique characteristics of near-net-shape forming and mold-free fabrication, serves as an effective medium for the materialization of digital designs into usable devices. This methodology is particularly applicable to gas sensors, where performance can be collaboratively optimized by the tailored design of each internal module including composition, microstructure, and architecture. Meanwhile, diverse 3D printing technologies can realize modularized fabrication according to the application requirements. The integration of artificial intelligence software systems further facilitates the output of precise and dependable signals. Simultaneously, the self-learning capabilities of the system also promote programmable optimization for the hardware, fostering continuous improvement of gas sensors for dynamic environments. This review investigates the latest studies on 3D-printed gas sensor devices and relevant components, elucidating the technical features and advantages of different 3D printing processes. A general testing framework for the performance evaluation of customized gas sensors is proposed. Additionally, it highlights the superiority and challenges of programmable and modularized gas sensors, providing a comprehensive reference for material adjustments, structure design, and process modifications for advanced gas sensor devices.

The Development of Carbon/Silicon Heterojunction Solar Cells through Interface Passivation

Passivating contactsin heterojunction (HJ) solar cells have shown great potential in reducing recombination losses, and thereby achieving high power conversion efficiencies in photovoltaic devices. In this direction, carbon nanomaterials have emerged as a promising option for carbon/silicon (C/Si) HJsolar cells due to their tunable band structure, wide spectral absorption, high carrier mobility, and properties such as multiple exciton generation. However, the current limitations in efficiency and active area have hindered the industrialization of these devices. In this review, they examine the progress made in overcoming these constraints and discuss the prospect of achieving high power conversion efficiency (PCE) C/Si HJ devices. A C/Si HJ solar cell is also designed by introducing an innovative interface passivation strategy to further boost the PCE and accelerate the large area preparationof C/Si devices. The physical principle, device design scheme, and performanceoptimization approaches of this passivated C/Si HJ cells are discussed. Additionally, they outline potential future pathways and directions for C/Si HJ devices, including a reduction in their cost to manufacture and their incorporation intotandem solar cells. As such, this review aims to facilitate a deeperunderstanding of C/Si HJ solar cells and provide guidance for their further development.

Coplanar Conformational Structure of π-Conjugated Polymers for Optoelectronic Applications

Hierarchical structure of conjugated polymers is critical to dominating their optoelectronic properties and applications. Compared to nonplanar conformational segments, coplanar conformational segments of conjugated polymers (CPs) demonstrate favorable properties for applications as a semiconductor. Herein, recent developments in the coplanar conformational structure of CPs for optoelectronic devices are summarized. First, this review comprehensively summarizes the unique properties of planar conformational structures. Second, the characteristics of the coplanar conformation in terms of optoelectrical properties and other polymer physics characteristics are emphasized. Five primary characterization methods for investigating the complanate backbone structures are illustrated, providing a systematical toolbox for studying this specific conformation. Third, internal and external conditions for inducing the coplanar conformational structure are presented, offering guidelines for designing this conformation. Fourth, the optoelectronic applications of this segment, such as light-emitting diodes, solar cells, and field-effect transistors, are briefly summarized. Finally, a conclusion and outlook for the coplanar conformational segment regarding molecular design and applications are provided.

Single-Step Inkjet-Printed Dielectric Template for Large Area Flexible Signage and Low-Information Displays

In recent years, the proliferation of smart gadgets has increased the demand for information displays; fortunately, organic light-emitting diodes (OLEDs) show great promise for use in display, lighting, and signage contexts. This research demonstrates inkjet printing of dielectric materials to provide maskless emission area patterning and electrical isolation for large-area OLEDs on flexible/rigid indium tin oxide (ITO)-coated substrates, avoiding the need for typical photolithography steps, including etching and lift-off processes. We have studied the impact of impinged droplets' velocity fluctuations, which are measured in relation to their interaction with the substrate, allowing for the determination of the drop diameter and shape. The inkjet parameters, such as pulse waveform, pulse voltage, and pulse width, are controlled to provide consistently repeatable ejection of dielectric ink droplets. The single-step patterning of complex designs with a minimum opening of 18 μm features is successfully printed with high fidelity. The effect of substrate temperature on the printed template/structure size and shape is explored. We have successfully demonstrated an ultralarge-area (120 × 120 mm2) OLED signage application on inkjet-printed dielectric template (IJPDt). Standard small-area OLEDs (4 × 4 mm2) achieved a maximum brightness of 24480 cd m-2 at 10 V and a maximum current efficiency of 17 cd A-1 with a low turn-on voltage of 2.7 V.

Water-Based Additive-Free Chromic Inks for Printing of Flexible Photochromics and Electrochromics

Digital inkjet printing has become one of the most convenient and efficient technologies for coating chromic materials on flexible substrates with complicated patterns. However, the development of water-based, additive-free chromic inks for inkjet printing still remains a challenge. Herein, three ammonium-functionalized colorless viologen derivatives AV, APV, and AQV with excellent water solubilities are utilized as chromes in the chromic inks due to their excellent photochromic and electrochromic properties. Water, ethanol, and ethylene glycol are selected as cosolvents, and their contents in this ternary solvent system have been optimized to achieve comprehensive rheological properties. With the H2O:EtOH:EG weight ratio of 8:1:7, the chromic ink based on AV realizes a viscosity of 4.69 mPa·s, a surface tension of 45.13 mN/m, and a Z value of 3.87. Without adding any additive, the as-prepared chromic inks can be printed on flexible substrates, such as paper and poly(ethylene terephthalate) (PET) films, by a conventional inkjet printer with inherent high resolutions. The printed patterns are initially invisible due to the colorless characteristics of the chromic inks. Interestingly, the printed films are responsive to both light and electric stimuli. Upon irradiation by UV light, a series of sentences with font sizes from 5 to 12 points and four quick response codes with different lattice resolutions clearly appear on the printed paper. Meanwhile, after printing on an indium tin oxide-coated PET substrate, electrochromic devices (ECDs) can be facilely fabricated by covering a hydrogel electrolyte on the printed films. Upon application of different potentials, the assembled ECDs exhibit "Peking Opera facial makeup" patterns with different colors. Therefore, the developed water-based additive-free chromic inks can be utilized for information display and encryption applications.

Enhanced photochemical activity and ultrafast photocarrier dynamics in sustainable synthetic melanin nanoparticle-based donor-acceptor inkjet-printed molecular junctions

Melanin is a stable, widely light-absorbing, photoactive, and biocompatible material viable for energy conversion, photocatalysis, and bioelectronic applications. To achieve multifunctional nanostructures, we synthesized melanin nanoparticles of uniform size and controlled chemical composition (dopamelanin and eumelanin) and used them with titanium dioxide to fabricate donor-acceptor bilayers. Their size enhances the surface-to-volume ratio important for any surface-mediated functionality, such as photocatalysis, sensing, and drug loading and release, while controlling their chemical composition enables to control the film's functionality and reproducibility. Inkjet printing uniquely allowed us to control the deposited amount of materials with minimum ink waste suitable for reproducible materials deposition. We studied the photochemical characteristics of the donor-acceptor melanin-TiO2 nanostructured films via photocatalytic degradation of methylene blue dye under selective UV-NIR and Vis-NIR irradiation conditions. Under both irradiation conditions, they exhibited photocatalytic characteristics superior to pure melanin and, under UV-NIR irradiation, superior to TiO2 alone; TiO2 is photoactive only under UV irradiation. The enhanced photocatalytic characteristics of the melanin-TiO2 nanostructured bilayer films, particularly when excited by visible light, point to charge separation at the melanin-TiO2 interface as a possible mechanism. We performed ultrafast laser spectroscopy to investigate the photochemical characteristics of pure melanin and the melanin-TiO2 constructs and found that their time-resolved photoexcited spectral patterns differ. We performed singular value decomposition analysis to quantitatively deconvolute and compare the dynamics of photochemical processes for melanin and melanin-TiO2 heterostructures. This observation supports electronic interactions, namely, interfacial charge separation at the melanin and TiO2 interface. The excited-state relaxation in melanin-TiO2 increases markedly from 5 ps to 400 ps. The results are remarkable for the future intriguing application of melanin-based constructs for bioelectronics and energy conversion.

Recent Progress in Printed Photonic Devices: A Brief Review of Materials, Devices, and Applications

Printing electronics incorporates several significant technologies, such as semiconductor devices produced by various printing techniques on flexible substrates. With the growing interest in printed electronic devices, new technologies have been developed to make novel devices with inexpensive and large-area printing techniques. This review article focuses on the most recent developments in printed photonic devices. Photonics and optoelectronic systems may now be built utilizing materials with specific optical properties and 3D designs achieved through additive printing. Optical and architected materials that can be printed in their entirety are among the most promising future research topics, as are platforms for multi-material processing and printing technologies that can print enormous volumes at a high resolution while also maintaining a high throughput. Significant advances in innovative printable materials create new opportunities for functional devices to act efficiently, such as wearable sensors, integrated optoelectronics, and consumer electronics. This article provides an overview of printable materials, printing methods, and the uses of printed electronic devices.

Recent Advances in Flexible Piezoresistive Arrays: Materials, Design, and Applications

Spatial distribution perception has become an important trend for flexible pressure sensors, which endows wearable health devices, bionic robots, and human-machine interactive interfaces (HMI) with more precise tactile perception capabilities. Flexible pressure sensor arrays can monitor and extract abundant health information to assist in medical detection and diagnosis. Bionic robots and HMI with higher tactile perception abilities will maximize the freedom of human hands. Flexible arrays based on piezoresistive mechanisms have been extensively researched due to the high performance of pressure-sensing properties and simple readout principles. This review summarizes multiple considerations in the design of flexible piezoresistive arrays and recent advances in their development. First, frequently used piezoresistive materials and microstructures are introduced in which various strategies to improve sensor performance are presented. Second, pressure sensor arrays with spatial distribution perception capability are discussed emphatically. Crosstalk is a particular concern for sensor arrays, where mechanical and electrical sources of crosstalk issues and the corresponding solutions are highlighted. Third, several processing methods are also introduced, classified as printing, field-assisted and laser-assisted fabrication. Next, the representative application works of flexible piezoresistive arrays are provided, including human-interactive systems, healthcare devices, and some other scenarios. Finally, outlooks on the development of piezoresistive arrays are given.

Study on the Film-Forming Mechanism of Polymer-Metal Oxide Composite Ink Systems Containing Different Polymer Molecules

A printable, flexible display panel is an important trend in the field of information display, which requires better mechanical and electrical properties of device materials. Polymer-metal oxide composite materials are promising in the functional layer of a thin-film transistor (TFT) and can be sufficiently fabricated by polymer-metal salt solution systems through the sol-gel process. For the development of polymer-metal oxide composite ink, it is necessary to study the film-forming mechanism of the composite film during solidification, which is an important reference in ink component design. However, the evolution of the composite structure is quite complex, which brings a challenge to characterization and analyzation. We applied a series of characterization methods to study the film-forming process of composite ink from sol to gel and to solid, and an emerging testing technology, nano-infrared spectroscopy (nano-IR), was applied to characterize the gel film. The research conclusion showed that the type of functional group can significantly affect the morphology of the initial particle and can finally determine the microstructure of the composite film. The study provides references for the development of composite ink as well as the characterization method for ink and film with complex composition.

Engineering Multi-Scale Organization for Biotic and Organic Abiotic Electroactive Systems

Multi-scale organization of molecular and living components is one of the most critical parameters that regulate charge transport in electroactive systems-whether abiotic, biotic, or hybrid interfaces. In this article, an overview of the current state-of-the-art for controlling molecular order, nanoscale assembly, microstructure domains, and macroscale architectures of electroactive organic interfaces used for biomedical applications is provided. Discussed herein are the leading strategies and challenges to date for engineering the multi-scale organization of electroactive organic materials, including biomolecule-based materials, synthetic conjugated molecules, polymers, and their biohybrid analogs. Importantly, this review provides a unique discussion on how the dependence of conduction phenomena on structural organization is observed for electroactive organic materials, as well as for their living counterparts in electrogenic tissues and biotic-abiotic interfaces. Expansion of fabrication capabilities that enable higher resolution and throughput for the engineering of ordered, patterned, and architecture electroactive systems will significantly impact the future of bioelectronic technologies for medical devices, bioinspired harvesting platforms, and in vitro models of electroactive tissues. In summary, this article presents how ordering at multiple scales is important for modulating transport in both the electroactive organic, abiotic, and living components of bioelectronic systems.

Flexible organic field-effect transistors-based biosensors: progress and perspectives

Organic field-effect transistors (OFETs) have been proposed beyond three decades while becoming a research hotspot again in recent years because of the fast development of flexible electronics. Many novel flexible OFETs-based devices have been reported in these years. Among these devices, flexible OFETs-based sensors made great strides because of the extraordinary sensing capability of FET. Most of these flexible OFETs-based sensors were designed for biological applications due to the advantages of flexibility, reduced complexity, and lightweight. This paper reviews the materials, fabrications, and applications of flexible OFETs-based biosensors. Besides, the challenges and opportunities of the flexible OFETs-based biosensors are also discussed.

Recent advances in inkjet-printing technologies for flexible/wearable electronics

The rapid development of flexible/wearable electronics requires novel fabricating strategies. Among the state-of-the-art techniques, inkjet printing has aroused considerable interest due to the possibility of large-scale fabricating flexible electronic devices with good reliability, high time efficiency, a low manufacturing cost, and so on. In this review, based on the working principle, recent advances in the inkjet printing technology in the field of flexible/wearable electronics are summarized, including flexible supercapacitors, transistors, sensors, thermoelectric generators, wearable fabric, and for radio frequency identification. In addition, some current challenges and future opportunities in this area are also addressed. We hope this review article can give positive suggestions to the researchers in the area of flexible electronics.

Design and Synthesis of Functional Silane-Based Silicone Resin and Application in Low-Temperature Curing Silver Conductive Inks

In the field of flexible electronics manufacturing, inkjet printing technology is a research hotspot, and it is key to developing low-temperature curing conductive inks that meet printing requirements and have suitable functions. Herein, methylphenylamino silicon oil (N75) and epoxy-modified silicon oil (SE35) were successfully synthesized through functional silicon monomers, and they were used to prepare silicone resin 1030H with nano SiO₂. 1030H silicone resin was used as the resin binder for silver conductive ink. The silver conductive ink we prepared with 1030H has good dispersion performance with a particle size of 50-100 nm, as well as good storage stability and excellent adhesion. Additionally, the printing performance and conductivity of the silver conductive ink prepared with n,n-dimethylformamide (DMF): proprylene glycol monomethyl ether (PM) (1:1) as solvent are better than those of the silver conductive ink prepared by DMF and PM solvent. Cured at a low temperature of 160 °C, the resistivity of 1030H-Ag-82%-3 conductive ink is 6.87 × 10^-6 Ω·m, and that of 1030H-Ag-92%-3 conductive ink is 0.564 × 10^-6 Ω·m, so the low-temperature curing silver conductive ink has high conductivity. The low-temperature curing silver conductive ink we prepared meets the printing requirements and has potential for practical applications.

Editorial for the Special Issue on Recent Advances in Inkjet Technology

Inkjet is a well-established technology that has been applied in various applications ranging from graphical printing to functional material printing [...].

Printed n- and p-Channel Transistors using Silicon Nanoribbons Enduring Electrical, Thermal, and Mechanical Stress

Printing technologies are changing the face of electronics with features such as resource-efficiency, low-cost, and novel form factors. While significant advances have been made in terms of organic electronics, the high-performance and stable transistors by printing, and their large-scale integration leading to fast integrated circuits remains a major challenge. This is because of the difficulties to print high-mobility semiconducting materials and the lack of high-resolution printing techniques. Herein, we present silicon based printed n- and p-channel transistors to demonstrate the possibility of developing high-performance complementary metal-oxide-semiconductor (CMOS) computing architecture. The direct roll transfer printing is used here for deterministic assembly of high-mobility single crystal silicon nanoribbons arrays on a flexible polyimide substrate. This is followed by high-resolution electrohydrodynamic printing to define source/drain/gate electrodes and to encapsulate, thus leading to printed devices. The printed transistors show effective peak mobilities of 15 cm2/(V s) (n-channel) and 5 cm2/(V s) (p-channel) at low 1 V drain bias. Furthermore, the effect of electrical, mechanical, and thermal stress on the performance and stability of the encapsulated transistors is investigated. The transistors showed stable transfer characteristics even after: (i) continuous 4000 transfer cycles, (ii) excruciating 10000 bending cycles at different bending radii (40, 25, and 15 mm), and (iii) between 15 and 60 °C temperatures.

High-Frequency Rheological and Piezo-Voltage Waveform Characterization of Inkjet-Printed Polymer-Based Dopant-Source Inks

This work focuses on developing an understanding of the rheological properties of polymer-based dopant-source inks at the timescales relevant to inkjet printing and their corresponding roles in determining the production of defect-free droplets. Ink-specific optimization of printing processes for phosphorus and boron dopant-source inks with different compositions is demonstrated. Rheological flow curves measured by a piezo axial vibrator (PAV) were used to study the changes in complex viscosity (η*) and in the elastic (G') and viscous (G″) components of the shear modulus (G*) with respect to changes in frequency (from f_min = 1 kHz to f_max = 10 kHz) to obtain an insight into the high-frequency behaviour of inks, as well as the effects of temperature (25 °C and 45 °C) and the natural aging time of the inks. Inks demonstrating complex viscosity η*_min ≥ 2 mPas to η*_max ≤ 20 mPas and an elastic modulus G' ≤ 20 Pa, produced droplets with negligible defects. Of the three rheological parameters (η*, G' and G″), the elastic component (G') of the shear modulus was observed to have the greatest significance in determining the stability and homogeneity of ink droplets, thus dictating the quality of the printed structures. The reliability and stability of droplet formation were further investigated through voltage waveform simulation using an oscilloscope.

Toward intelligent food packaging of biosensor and film substrate for monitoring foodborne microorganisms: A review of recent advancements

Microorganisms in food do harms to human. They can cause serious adverse reactions and sometimes even death. So it is an urgent matter to find an effective method to control them. The research of intelligent- biosensor packaging is in the ascendant in recent years, which is mainly promoted by reflecting on food safety and reducing resource waste. Intelligent biosensor-packaging is an instant and efficient intelligent packaging technology, which can directly and scientifically manifest the quality of food without complex operation. In this review, the purposes of providing relevant information on intelligent biosensor-packaging are reviewed, such as types of biosensors for monitoring foodborne microorganism, the suitable material for intelligent biosensor-packaging and design and fabrication of intelligent biosensor-packaging. The potential of intelligent biosensor-packaging in the detection of foodborne microorganisms is emphasized. The challenges and directions of the intelligent biosensor-packaging in the detection of foodborne pathogens are discussed. With the development of science and technology in the future, the intelligent biosensor-packaging should be commercialized in a real sense. And it is expected that commercial products can be manufactured in the future, which will provide a far-reaching approach in food safety and food prevention. HighlightsSeveral biosensors are suitable for the detection of food microorganisms.Plastic polymer is an excellent choice for the construction of intelligent biosensor packaging.Design and fabrication can lay the foundation for intelligent-biosensor packaging.Intelligent biosensor-packaging can realize fast and real-time detection of microorganisms in food.

Vertically Integrated Electronics: New Opportunities from Emerging Materials and Devices

Vertical three-dimensional (3D) integration is a highly attractive strategy to integrate a large number of transistor devices per unit area. This approach has emerged to accommodate the higher demand of data processing capability and to circumvent the scaling limitation. A huge number of research efforts have been attempted to demonstrate vertically stacked electronics in the last two decades. In this review, we revisit materials and devices for the vertically integrated electronics with an emphasis on the emerging semiconductor materials that can be processable by bottom-up fabrication methods, which are suitable for future flexible and wearable electronics. The vertically stacked integrated circuits are reviewed based on the semiconductor materials: organic semiconductors, carbon nanotubes, metal oxide semiconductors, and atomically thin two-dimensional materials including transition metal dichalcogenides. The features, device performance, and fabrication methods for 3D integration of the transistor based on each semiconductor are discussed. Moreover, we highlight recent advances that can be important milestones in the vertically integrated electronics including advanced integrated circuits, sensors, and display systems. There are remaining challenges to overcome; however, we believe that the vertical 3D integration based on emerging semiconductor materials and devices can be a promising strategy for future electronics.

Inkjet printing of two-dimensional van der Waals materials: a new route towards emerging electronic device applications

Two-dimensional (2D) van der Waals (vdW) materials are considered one of the most promising candidates to realize emerging electrical applications. Although until recently, much effort has been dedicated to demonstrating high-performance single 2D vdW devices, associated with rapid progress in 2D vdW materials, demands for their large-scale practical applications have noticeably increased from a manufacturing perspective. Drop-on-demand inkjet printing can be the most feasible solution by exploiting the advantages of layered 2D contacts and advanced 2D vdW ink formulations. This review presents recent achievements in inkjet-printed 2D vdW material-based device applications. A brief introduction to 2D vdW materials and inkjet printing principles, followed by various ink formulation methods, is first presented. Then, the state-of-the-art inkjet-printed 2D vdW device applications and their remaining technical issues are highlighted. Finally, prospects and challenges to be overcome to demonstrate fully inkjet-printed, high-performance 2D vdW devices are also discussed.

Polymer Skulls With Integrated Transparent Electrode Arrays for Cortex-Wide Opto-Electrophysiological Recordings

Electrophysiology and optical imaging provide complementary neural sensing capabilities - electrophysiological recordings have high temporal resolution, while optical imaging allows recording of genetically-defined populations at high spatial resolution. Combining these two modalities for simultaneous large-scale, multimodal sensing of neural activity across multiple brain regions can be very powerful. Here, transparent, inkjet-printed electrode arrays with outstanding optical and electrical properties are seamlessly integrated with morphologically conformant transparent polymer skulls. Implanted on transgenic mice expressing the Calcium (Ca2+ ) indicator GCaMP6f in excitatory neurons, these "eSee-Shells" provide a robust opto-electrophysiological interface for over 100 days. eSee-Shells enable simultaneous mesoscale Ca2+ imaging and electrocorticography (ECoG) acquisition from multiple brain regions covering 45 mm2 of cortex under anesthesia and in awake animals. The clarity and transparency of eSee-Shells allow recording single-cell Ca2+ signals directly below the electrodes and interconnects. Simultaneous multimodal measurement of cortical dynamics reveals changes in both ECoG and Ca2+ signals that depend on the behavioral state.

Direct patterning of colloidal quantum dots with adaptable dual-ligand surface

Colloidal quantum dots (QDs) stand at the forefront of a variety of photonic applications given their narrow spectral bandwidth and near-unity luminescence efficiency. However, integrating luminescent QD films into photonic devices without compromising their optical or transport characteristics remains challenging. Here we devise a dual-ligand passivation system comprising photocrosslinkable ligands and dispersing ligands to enable QDs to be universally compatible with solution-based patterning techniques. The successful control over the structure of both ligands allows the direct patterning of dual-ligand QDs on various substrates using commercialized photolithography (i-line) or inkjet printing systems at a resolution up to 15,000 pixels per inch without compromising the optical properties of the QDs or the optoelectronic performance of the device. We demonstrate the capabilities of our approach for QD-LED applications. Our approach offers a versatile way of creating various structures of luminescent QDs in a cost-effective and non-destructive manner, and could be implemented in nearly all commercial photonics applications where QDs are used.

Liquid-Phase Exfoliation of Nonlayered Non-Van-Der-Waals Crystals into Nanoplatelets

For nearly 15 years, researchers have been using liquid-phase exfoliation (LPE) to produce 2D nanosheets from layered crystals. This has yielded multiple 2D materials in a solution-processable form whose utility has been demonstrated in multiple applications. It was believed that the exfoliation of such materials is enabled by the very large bonding anisotropy of layered materials where the strength of intralayer chemical bonds is very much larger than that of interlayer van der Waals bonds. However, over the last five years, a number of papers have raised questions about our understanding of exfoliation by describing the LPE of nonlayered materials. These results are extremely surprising because, as no van der Waals gap is present to provide an easily cleaved direction, the exfoliation of such compounds requires the breaking of only chemical bonds. Here the progress in this unexpected new research area is examined. The structure and properties of nanoplatelets produced by LPE of nonlayered materials are reviewed. A number of unexplained trends are found, not least the preponderance of isotropic materials that have been exfoliated to give high-aspect-ratio nanoplatelets. Finally, the applications potential of this new class of 2D materials are considered.

Fabrication of Chitosan-Loaded Multifunctional Wool Fabric for Reactive Dye Digital Inkjet Printing by Schiff Base Reaction

Improving the development of high-value multifunctional wool fabrics was essential to satisfy diverse needs. Considering the various characteristics of chitosan macromolecules, herein, a padding-cross-linking process was adopted and then multifunctional wool fabrics with outstanding printing effects, shrink resistance, and antibacterial properties were fabricated. The test results showed that chitosan macromolecules loaded successfully on the wool fiber surface by Schiff base reaction. Wool fabrics changed from hydrophobic to hydrophilic due to the existence of chitosan macromolecules. The color strength (K/S value) of the reactive dye inkjet-printed wool fabric was greatly increased from 20.48 to 26.6. The area shrinkage of final samples was 2.53%, which was exceedingly lower than that of the original wool (10.96%). Moreover, the chitosan macromolecules with reactive amino groups endowed wool fabrics with certain antibacterial properties against E. coli and S. aureus. Generally, this study provided guidance for manufacturing multifunctional digital inkjet-printed wool products in mass production.

Emerging Electrochromic Materials and Devices for Future Displays

With the rapid development of optoelectronic fields, electrochromic (EC) materials and devices have received remarkable attention and have shown attractive potential for use in emerging wearable and portable electronics, electronic papers/billboards, see-through displays, and other new-generation displays, due to the advantages of low power consumption, easy viewing, flexibility, stretchability, etc. Despite continuous progress in related fields, determining how to make electrochromics truly meet the requirements of mature displays (e.g., ideal overall performance) has been a long-term problem. Therefore, the commercialization of relevant high-quality products is still in its infancy. In this review, we will focus on the progress in emerging EC materials and devices for potential displays, including two mainstream EC display prototypes (segmented displays and pixel displays) and their commercial applications. Among these topics, the related materials/devices, EC performance, construction approaches, and processing techniques are comprehensively disscussed and reviewed. We also outline the current barriers with possible solutions and discuss the future of this field.

Composites Additive Manufacturing for Space Applications: A Review

The assembly of 3D printed composites has a wide range of applications for ground preparation of space systems, in-orbit manufacturing, or even in-situ resource utilisation on planetary surfaces. The recent developments in composites additive manufacturing (AM) technologies include indoor experimentation on the International Space Station, and technological demonstrations will follow using satellite platforms on the Low Earth Orbits (LEOs) in the next few years. This review paper surveys AM technologies for varied off-Earth purposes where components or tools made of composite materials become necessary: mechanical, electrical, electrochemical and medical applications. Recommendations are also made on how to utilize AM technologies developed for ground applications, both commercial-off-the-shelf (COTS) and laboratory-based, to reduce development costs and promote sustainability.

Virtual Screening for Organic Solar Cells and Light Emitting Diodes

The field of organic semiconductors is multifaceted and the potentially suitable molecular compounds are very diverse. Representative examples include discotic liquid crystals, dye-sensitized solar cells, conjugated polymers, and graphene-based low-dimensional materials. This huge variety not only represents enormous challenges for synthesis but also for theory, which aims at a comprehensive understanding and structuring of the plethora of possible compounds. Eventually computational methods should point to new, better materials, which have not yet been synthesized. In this perspective, it is shown that the answer to this question rests upon the delicate balance between computational efficiency and accuracy of the methods used in the virtual screening. To illustrate the fundamentals of virtual screening, chemical design of non-fullerene acceptors, thermally activated delayed fluorescence emitters, and nanographenes are discussed.

Fully Printed Optoelectronic Synaptic Transistors Based on Quantum Dot-Metal Oxide Semiconductor Heterojunctions

Optoelectronic synaptic transistors with hybrid heterostructure channels have been extensively developed to construct artificial visual systems, inspired by the human visual system. However, optoelectronic transistors taking full advantages of superior optoelectronic synaptic behaviors, low-cost processes, low-power consumption, and environmental benignity remained a challenge. Herein, we report a fully printed, high-performance optoelectronic synaptic transistor based on hybrid heterostructures of heavy-metal-free InP/ZnSe core/shell quantum dots (QDs) and n-type SnO₂ amorphous oxide semiconductors (AOSs). The elaborately designed heterojunction improves the separation efficiency of photoexcited charges, leading to high photoresponsivity and tunable synaptic weight changes. Under the coordinated modulation of electrical and optical modes, important biological synaptic behaviors, including excitatory postsynaptic current, short/long-term plasticity, and paired-pulse facilitation, were demonstrated with a low power consumption (∼5.6 pJ per event). The InP/ZnSe QD/SnO₂ based artificial vision system illustrated a significantly improved accuracy of 91% in image recognition, compared to that of bare SnO₂ based counterparts (58%). Combining the outstanding synaptic characteristics of both AOS materials and heterojunction structures, this work provides a printable, low-cost, and high-efficiency strategy to achieve advanced optoelectronic synapses for neuromorphic electronics and artificial intelligence.

Printable inks and deformable electronic array devices

Deformable printed electronic array devices are expected to revolutionize next-generation electronics. However, although remarkable technological advances in printable inks and deformable electronic array devices have recently been achieved, technical challenges remain to commercialize these technologies. In this review article a brief introduction to printing methods highlighting significant research studies on ink formation for conductors, semiconductors, and insulators is provided, and the structural design and successful printing strategies of deformable electronic array devices are described. Successful device demonstrations are presented in the applications of passive- and active-matrix array devices. Finally, perspectives and technological challenges to be achieved are pointed out to print practically available deformable devices.

Fully handwritten electrodes on paper substrate using rollerball pen with silver nanoparticle ink, marker pen with carbon nanotube ink and graphite pencil

Herein, a so-called carbon nanotube (CNT) electrode was printed in on a paper substrate using the handwriting technique and carbon nanotube ink in a marker pen to print the working electrode, graphite pencil to print the counter electrode and graphite/silver nanoparticle (AgNP) ink in a rollerball pen to print the quasi-reference electrode. The carbon nanotube electrode was characterized via scanning electron microscopy. The electrode was optimized based on the type of paper, hydrophobic barrier and number of layers. In summary, the optimized parameters included the use of matte paper with a mineral spirit layer. The number of carbon nanotube layers to achieve the best electrochemical performance was 25. The final graphite electrode was a miniaturized and flexible paper-based electrochemical electrode. To evaluate the electrical properties of the electrodes, the ohmic resistance of each ink was tested using a multimeter and the obtained values were 18.62 kΩ for the CNT ink, 1.53 Ω for the AgNP ink and 3.53 kΩ for the graphite trace. These results indicate the good conductivity of each synthesized ink used in the fabrication of the CNT electrode. Finally, the electrode was used to measure the electrochemical response of different concentrations of K₄[Fe(CN)₆]. Then, a calibration curve was obtained from the voltammograms and linearity was observed in the range of 0.5-3.5 mM. This suggests that the CNT electrode has the potential to be used as an amperometric electrode.

Molecular Engineering of Printed Semiconducting Blends to Develop Organic Integrated Circuits: Crystallization, Charge Transport, and Device Application Analyses

Solution-based printing has contributed to the facile deposition of various types of materials, including the building blocks of printed electronics. In particular, solution-processable organic semiconductors (OSCs) are regarded as one of the most fascinating candidates for the fabrication of printed electronics. Herein, we report electrohydrodynamic (EHD) jet-printed p- and n-type OSCs, namely 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-PEN) and 6,13-bis((triisopropylsilyl)ethynyl)-5,7,12,14-tetraazapentacene (TIPS-TAP), and their use as single-OSC layers and as OSC mixed p-n layers to fabricate solution-processed p-, n-, and ambipolar-type organic field-effect transistors (OFETs). Use of the dragging mode of EHD jet printing, a process driven under a low electrostatic field with a short nozzle-to-substrate distance, was found to provide favorable conditions for growth of TIPS-PEN and TIPS-TAP crystals. In this way, the similar molecular structures of TIPS-PEN and TIPS-TAP yielded a homogeneous solid solution and showed ambipolar transport properties in OFETs. Therefore, the combination of single- and mixed-OSC layers enabled the preparation of various charge-transported devices from unit to integrated devices (NOT, NAND, NOR, and multivalued logic). Therefore, this fabrication technology can be useful for assisting in the production of OSC layers for practical applications in the near future.

Challenges, Prospects, and Emerging Applications of Inkjet-Printed Electronics: A Chemist's Point of View

Driven by the development of new functional inks, inkjet-printed electronics has achieved several milestones upon moving from the integration of simple electronic elements (e.g., temperature and pressure sensors, RFID antennas, etc.) to high-tech applications (e.g. in optoelectronics, energy storage and harvesting, medical diagnosis). Currently, inkjet printing techniques are limited by spatial resolution higher than several micrometers, which sets a redhibitorythreshold for miniaturization and for many applications that require the controlled organization of constituents at the nanometer scale. In this Review, we present the physico-chemical concepts and the equipment constraints underpinning the resolution limit of inkjet printing and describe the contributions from molecular, supramolecular, and nanomaterials-based approaches for their circumvention. Based on these considerations, we propose future trajectories for improving inkjet-printing resolution that will be driven and supported by breakthroughs coming from chemistry. Please check all text carefully as extensive language polishing was necessary. Title ok? Yes.

Influence of the Micro-Nanostructuring of Titanium Dioxide Films on the Photocatalytic Degradation of Formic Acid under UV Illumination

Surface micro-nanostructuring can provide new functionalities and properties to coatings. For example, it can improve the absorption efficiency, hydrophobicity and/or tribology properties. In this context, we studied the influence of micro-nanostructuring on the photocatalytic efficiency of sol-gel TiO₂ coatings during formic acid degradation under UV illumination. The micro-nanostructuring was performed using the UV illumination of microspheres deposited on a photopatternable sol-gel layer, leading to a hexagonal arrangement of micropillars after development. The structures and coatings were characterized using Raman spectroscopy, ellipsometry, atomic force microscopy and scanning electron microscopy. When the sol-gel TiO₂ films were unstructured and untreated at 500 °C, their effect on formic acid’s degradation under UV light was negligible. However, when the films were annealed at 500 °C, they crystallized in the anatase phase and affected the degradation of formic acid under UV light, also depending on the thickness of the layer. Finally, we demonstrated that surface micro-nanostructuring in the form of nanopillars can significantly increase the photocatalytic efficiency of a coating during the degradation of formic acid under UV light.

Inkjet-Printed Silver Nanowire Ink for Flexible Transparent Conductive Film Applications

The development of flexible transparent conductive electrodes has been considered as a key issue in realizing flexible functional electronics. Inkjet printing provides a new opportunity for the manufacture of FFE due to simple process, cost-effective, environmental friendliness, and digital method to circuit pattern. However, obtaining high concentration of inkjet- printed silver nanowires (AgNWs) conductive ink is a great challenge because the high aspect ratio of AgNWs makes it easy to block the jetting nozzle. This study provides an inkjet printing AgNWs conductive ink with low viscosity and high concentration of AgNWs and good printing applicability, especially without nozzle blockage after printing for more than 4 h. We discussed the effects of the components of the ink on surface tension, viscosity, contact angle as well as droplet spreading behavior. Under the optimized process and formulation of ink, flexible transparent conductive electrode with a sheet resistance of 32 Ω·sq⁻¹–291 nm·sq⁻¹ and a transmittancy at 550 nm of 72.5–86.3% is achieved. We investigated the relationship between the printing layer and the sheet resistance and the stability of the sheet resistance under a bending test as well as the infrared thermal response of the AgNWs–based flexible transparent conductive electrode. We successfully printed the coupling electrodes and demonstrated the excellent potential of inkjet-printed AgNWs—based flexible transparent conductive electrode for developing flexible functional electronics.

Silver Nanoparticles for Conductive Inks: From Synthesis and Ink Formulation to Their Use in Printing Technologies

Currently, silver nanoparticles have attracted large interest in the photonics, electrics, analytical, and antimicrobial/biocidal fields due to their excellent optical, electrical, biological, and antibacterial properties. The versatility in generating different sizes, shapes, and surface morphologies results in a wide range of applications of silver nanoparticles in various industrial and health-related areas. In industrial applications, silver nanoparticles are used to produce conductive inks, which allows the construction of electronic devices on low-cost and flexible substrates by using various printing techniques. In order to achieve successful printed patterns, the necessary formulation and synthesis need to be engineered to fulfil the printing technique requirements. Additional sintering processes are typically further required to remove the added polymers, which are used to produce the desired adherence, viscosity, and reliable performance. This contribution presents a review of the synthesis of silver nanoparticles via different methods (chemical, physical and biological methods) and the application of silver nanoparticles under the electrical field. Formulation of silver inks and formation of conductive patterns by using different printing techniques (inkjet printing, screen printing and aerosol jet printing) are presented. Post-printing treatments are also discussed. A summary concerning outlooks and perspectives is presented at the end of this review.

The Solution is the Solution: Data-Driven Elucidation of Solution-to-Device Feature Transfer for π-Conjugated Polymer Semiconductors

The advent of data analytics techniques and materials informatics provides opportunities to accelerate the discovery and development of organic semiconductors for electronic devices. However, the development of engineering solutions is limited by the ability to control thin-film morphology in an immense parameter space. The combination of high-throughput experimentation (HTE) laboratory techniques and data analytics offers tremendous avenues to traverse the expansive domains of tunable variables offered by organic semiconductor thin films. This Perspective outlines the steps required to incorporate a comprehensive informatics methodology into the experimental development of polymer-based organic semiconductor technologies. The translation of solution processing and property metrics to thin-film behavior is crucial to inform efficient HTE for data collection and application of data-centric tools to construct new process-structure-property relationships. We argue that detailed investigation of the solution state prior to deposition in conjunction with thin-film characterization will yield a deeper understanding of the physicochemical mechanisms influencing performance in π-conjugated polymer electronics, with data-driven approaches offering predictive capabilities previously unattainable via traditional experimental means.

Stencil Printing of Liquid Metal upon Electrospun Nanofibers Enables High-Performance Flexible Electronics

Flexible electronics as an emerging technology has demonstrated potential for applications in various fields. With the advent of the Internet of Things era, countless flexible electronic systems need to be developed and deployed. However, materials and fabrication technologies are the key factors restricting the development and commercialization of flexible electronics. Here we report a simple, fast, and green flexible electronics preparation technology. The stencil printing method is adopted to pattern liquid metal on the thermoplastic polyurethane membrane prepared by electrospinning. Besides, with layer-by-layer assembly, flexible circuits, resistors, capacitors, inductors, and their composite devices can be prepared parametrically. Furthermore, these devices have good stretchability, air permeability, and stability, while they are multilayered and reconfigurable. As proof, this strategy is used to fabricate flexible displays, flexible sensors, and flexible filters. Finally, flexible electronic devices are also recycled and reconfigured.

New Opportunities for High-Performance Source-Gated Transistors Using Unconventional Materials

Source-gated transistors (SGTs), which are typically realized by introducing a source barrier in staggered thin-film transistors (TFTs), exhibit many advantages over conventional TFTs, including ultrahigh gain, lower power consumption, higher bias stress stability, immunity to short-channel effects, and greater tolerance to geometric variations. These properties make SGTs promising candidates for readily fabricated displays, biomedical sensors, and wearable electronics for the Internet of Things, where low power dissipation, high performance, and efficient, low-cost manufacturability are essential. In this review, the general aspects of SGT structure, fabrication, and operation mechanisms are first discussed, followed by a detailed property comparison with conventional TFTs. Next, advances in high-performance SGTs based on silicon are first discussed, followed by recent advances in emerging metal oxides, organic semiconductors, and 2D materials, which are individually discussed, followed by promising applications that can be uniquely realized by SGTs and their circuitry. Lastly, this review concludes with challenges and outlook overview.

Layout-to-Bitmap Conversion and Design Rules for Inkjet-Printed Large-Scale Integrated Circuits

Digital inkjet printing (IJP) can greatly reduce the manufacturing cost and waste of flexible large-area electronics by adding micro-fine patterns onto plastic foils. Advanced system design using IJP has been limited by the lack of an electronic design automation (EDA) approach. An EDA approach based on a vector-based layout drawing requires parameterized IJP design rules. This study proposes a layout-to-bitmap (L2B) conversion procedure and line-based design rules that leverage the existing circuit layout EDA tools for advanced IJP designs. The L2B conversion is accomplished by optimizing the parameters of the horizontal and vertical lines by varying the drop spacings and platen temperatures. Next, the line-based layouts are converted to bitmap files which are used as IJP input data for printing multiple metal layers. This study systematically investigated the development of an IJP process employing Ag nanoparticles. The physical characteristics of the proposed process were evaluated based on theories concerning inkjet-printed bead formation. The design rules for fabricating printed thin-film transistor (TFT) circuits were documented. Documentation is the first step in creating an IJP process design kit for advanced electronics design. Using the optimized L2B conversion procedure and the design rules, a 10 × 10 array of printed organic TFTs was fabricated to demonstrate the reliability of the developed process. Additionally, the fabricated printed organic TFTs indicated that the proposed process could be extended to large-scale system designs.

Printable Smart Materials and Devices: Strategies and Applications

Smart materials are a kind of functional materials which can sense and response to environmental conditions or stimuli from optical, electrical, magnetic mechanical, thermal, and chemical signals, etc. Patterning of smart materials is the key to achieving large-scale arrays of functional devices. Over the last decades, printing methods including inkjet printing, template-assisted printing, and 3D printing are extensively investigated and utilized in fabricating intelligent micro/nano devices, as printing strategies allow for constructing multidimensional and multimaterial architectures. Great strides in printable smart materials are opening new possibilities for functional devices to better serve human beings, such as wearable sensors, integrated optoelectronics, artificial neurons, and so on. However, there are still many challenges and drawbacks that need to be overcome in order to achieve the controllable modulation between smart materials and device performance. In this review, we give an overview on printable smart materials, printing strategies, and applications of printed functional devices. In addition, the advantages in actual practices of printing smart materials-based devices are discussed, and the current limitations and future opportunities are proposed. This review aims to summarize the recent progress and provide reference for novel smart materials and printing strategies as well as applications of intelligent devices.

Fully Printed High-Performance n-Type Metal Oxide Thin-Film Transistors Utilizing Coffee-Ring Effect

Metal oxide thin-films transistors (TFTs) produced from solution-based printing techniques can lead to large-area electronics with low cost. However, the performance of current printed devices is inferior to those from vacuum-based methods due to poor film uniformity induced by the "coffee-ring" effect. Here, we report a novel approach to print high-performance indium tin oxide (ITO)-based TFTs and logic inverters by taking advantage of such notorious effect. ITO has high electrical conductivity and is generally used as an electrode material. However, by reducing the film thickness down to nanometers scale, the carrier concentration of ITO can be effectively reduced to enable new applications as active channels in transistors. The ultrathin (~10-nm-thick) ITO film in the center of the coffee-ring worked as semiconducting channels, while the thick ITO ridges (>18-nm-thick) served as the contact electrodes. The fully inkjet-printed ITO TFTs exhibited a high saturation mobility of 34.9 cm² V^-1 s^-1 and a low subthreshold swing of 105 mV dec^-1. In addition, the devices exhibited excellent electrical stability under positive bias illumination stress (PBIS, ΔV_th = 0.31 V) and negative bias illuminaiton stress (NBIS, ΔV_th = -0.29 V) after 10,000 s voltage bias tests. More remarkably, fully printed n-type metal-oxide-semiconductor (NMOS) inverter based on ITO TFTs exhibited an extremely high gain of 181 at a low-supply voltage of 3 V, promising for advanced electronics applications.

Lithographic Processes for the Scalable Fabrication of Micro- and Nanostructures for Biochips and Biosensors

Since the early 2000s, extensive research has been performed to address numerous challenges in biochip and biosensor fabrication in order to use them for various biomedical applications. These biochips and biosensor devices either integrate biological elements (e.g., DNA, proteins or cells) in the fabrication processes or experience post fabrication of biofunctionalization for different downstream applications, including sensing, diagnostics, drug screening, and therapy. Scalable lithographic techniques that are well established in the semiconductor industry are now being harnessed for large-scale production of such devices, with additional development to meet the demand of precise deposition of various biological elements on device substrates with retained biological activities and precisely specified topography. In this review, the lithographic methods that are capable of large-scale and mass fabrication of biochips and biosensors will be discussed. In particular, those allowing patterning of large areas from 10 cm² to m², maintaining cost effectiveness, high throughput (>100 cm² h^-1), high resolution (from micrometer down to nanometer scale), accuracy, and reproducibility. This review will compare various fabrication technologies and comment on their resolution limit and throughput, and how they can be related to the device performance, including sensitivity, detection limit, reproducibility, and robustness.

Recent Advances in High-Throughput Nanomaterial Manufacturing for Hybrid Flexible Bioelectronics

Hybrid flexible bioelectronic systems refer to integrated soft biosensing platforms with tremendous clinical impact. In this new paradigm, electrical systems can stretch and deform with the skin while previously hidden physiological signals can be continuously recorded. However, hybrid flexible bioelectronics will not receive wide clinical adoption until these systems can be manufactured at industrial scales cost-effectively. Therefore, new manufacturing approaches must be discovered and studied under the same innovative spirit that led to the adoption of novel materials and soft structures. Recent works have taken mature manufacturing approaches from the graphics industry, such as gravure, flexography, screen, and inkjet printing, and applied them to fully printed bioelectronics. These applications require the cohesive study of many disparate parts. For instance, nanomaterials with optimal properties for each specific application must be dispersed in printable inks with rheology suited to each printing method. This review summarizes recent advances in printing technologies, key nanomaterials, and applications of the manufactured hybrid bioelectronics. We also discuss the existing challenges of the available nanomanufacturing methods and the areas that need immediate technological improvements.

Metal-Organic Framework as a Functional Analyte Channel of Organic-Transistor-Based Air Pollution Sensors

Air pollution sensors based on organic transistors have attracted much interest recently; however, the devices suffer from low responsivity and slow response and recovery rates for gas analytes. These shortcomings are attributed to the low charge-carrier mobility of organic semiconductors and to a structural limitation resulting from the use of a thick and continuous active layer. In the present work, we investigated the material properties of a multiscale porous zeolitic imidazolate framework, [Zn(2-methylimidazole)₂]_n (ZIF-8), and examined its potential as an analyte channel material inserted at an organic-transistor active layer. A series of carbonized zeolitic imidazolate frameworks (ZIFs) were prepared by thermal conversion of ZIF-8 and also studied for comparison. The microstructures, morphologies, and optical/electrical characteristics of polythiophene/ZIF-8 hybrid films were systematically investigated. Organic-transistor-type nitrogen dioxide sensors based on the polythiophene/ZIF-8 hybrid films showed substantially improved sensing properties, including responsivity, response rate, and recovery rate. The electrical conductivity of the carbonized ZIF-8s enhanced the field-effect mobility of the organic transistors; however, the sensing performance was not improved, because of the closed pore structures resulting from the carbonization. These results provide invaluable information and useful insights into the design of transistor-type gas sensors based on organic semiconductor/metal-organic framework hybrid films.

Inkjet Printing Transparent and Conductive MXene (Ti3C2Tx) Films: A Strategy for Flexible Energy Storage Devices

MXene is a generic name for a large family of two-dimensional transition metal carbides or nitrides, which show great promise in the field of transparent supercapacitors. However, the manufacturing of supercapacitor electrodes with a high charge storage capacity and desirable transmittance is a challenging task. Herein, a low-cost, large-scale, and rapid preparation of flexible and transparent MXene films via inkjet printing is reported. The MXene films realized the sheet resistance (R_s) of 1.66 ± 0.16 MΩ sq^-1 to 1.47 ± 0.1 kΩ sq^-1 at the transmissivity of 87-24% (λ = 550 nm), respectively, corresponding to the figure of merit (the ratio of electronic to optical conductivity, σ_DC/σ_OP) of ∼0.0012 to 0.13. Furthermore, the potential of inkjet-printed transparent MXene films in transparent supercapacitors was assessed by electrochemical characterization. The MXene film, with a transmittance of 24%, exhibited a superior areal capacitance of 887.5 μF cm^-2 and retained 85% of the initial capacitance after 10,000 charge/discharge cycles at the scan rate of 10 mV s^-1. Interestingly, the areal capacitance (192 μF cm^-2) of an assembled symmetric MXene transparent supercapacitor, with a high transmittance of 73%, still surpasses the performance of previously reported graphene and single-walled carbon nanotube (SWCNT)-based transparent electrodes. The convenient manufacturing and superior electrochemical performance of inkjet-printed flexible and transparent MXene films widen the application horizon of this strategy for flexible energy storage devices.