Responsive inverse opal hydrogels for the sensing of macromolecules

Multifunctional photonic microobjects with asymmetric response in radial direction and their anticounterfeiting performance

There are few explorations that have integrated multiple properties into photonic microobjects in a facile and controlled manner. In this work, we present a straightforward method to integrate different functions into individual photonic microobject. Droplet-based microfluidics was used to produce uniform droplets of an aqueous dispersion of monodispersed SiO2 nanoparticles (NPs). The droplets evolved into opal-structured photonic microballs upon complete evaporation of water. After infiltration of an aqueous solution of acrylamide (AAm) and acrylic acid (AAc) monomers into the interstices among SiO2 NPs, opal-structured SiO2 NPs/pAAm-co-AAc hydrogel composite photonic microballs were obtained upon UV irradiation. Afterwards, a wet etching process was introduced to etch the microballs in a controlled manner, yielding individual photonic microball composed of an SiO2 NPs/pAAm-co-AAc composite opal core and a neat pAAm-co-AAc shell. The pendant carboxylic acid groups in the skeleton of the hydrogel matrix were further utilized to react with positively charged compounds, such as Ruthenium compound containing fluorescent polymers. The resulting photonic microobjects eventually featured with localized stimulus-responsive properties and multiple colors under different modes. The multifunctional photonic microobjects were discovered to have fivefold of anticounterfeiting properties when used as building blocks for anticounterfeiting structures and may have other potential applications.

Artificial Skin with Patterned Stripes for Color Camouflage and Thermoregulation

Chameleons are famous for their quick color changing abilities, and it is commonly assumed that they do this for camouflage. However, recent reports revealed that chameleons also change color for body temperature regulation. Inspired by the structure of the panther chameleon's skin, a stripe-patterned poly(N-isopropylacrylamide) (PNIPAM) and polyacrylamide (PAM) hydrogel film with a laminated structure is fabricated in this work; thus, both camouflage and thermoregulation can be achieved through controlling Vis and NIR light effectively. For the PNIPAM stripe, the upper layer is the native PNIPAM hydrogel and the lower layer is the carbon nanotube-composited PNIPAM hydrogel. Thus, the PNIPAM stripe is capable of reaching 28 °C at a low environmental temperature (12 °C) and a low radiation intensity (20 mW cm-2), while preventing the body temperature from rising by changing to white under a strong radiation intensity (100 mW cm-2). For the PAM stripe, the upper layer combines colloidal photonic crystals and displays a tunable structural color by stretching, and the lower layer is mixed with PNIPAM microgels for thermal regulation. Through the fabrication of multifunctional patterns, the film can achieve both dynamic structural color and thermoregulation by precisely controlling solar radiation absorption, scattering, and reflection. More importantly, in the stripe-patterned system, the shrinkage of the PNIPAM stripes can effectively trigger the elongation of the PAM stripe, which endows the structural color changing process to be self-powered completely. The performances show that the stripe-patterned film may have potential applications in intelligent coatings, especially in areas with large temperature differences during the day such as high plains.

Responsive photonic hydrogel for colorimetric detection of formaldehyde

Formaldehyde (FA) can damage DNA, cause liver and kidney dysfunction, and ultimately lead to malignant tumors. Therefore, it is essential to develop a method that can conveniently detect FA with high detection sensitivity. Here, a responsive photonic hydrogel was prepared by embedding three-dimensional photonic crystal (PC) into amino-functionalized hydrogel to construct a colorimetric sensing film for FA. The amino groups on the polymer chains of the photonic hydrogel reacts with FA to increase the crosslinking density of the hydrogel, resulting in its volume shrinkage and a decrease in microsphere spacing of the PC. That causes the reflectance spectra blue-shift of more than 160 nm and color change from red to cyan for the optimized photonic hydrogel, achieving the sensitive, selective and colorimetric detection of FA. The constructed photonic hydrogel shows good accuracy and reliability for practical determination of FA in air and aquatic products, providing a new strategy for designing other target analytes responsive photonic hydrogels.

Thermoresponsive and co-nonsolvency behavior of poly(N-vinyl isobutyramide) and poly(N-isopropyl methacrylamide) as poly(N-isopropyl acrylamide) analogs in aqueous media

Sets of the nonionic polymers poly(N-vinyl isobutyramide) (pNVIBAm) and poly(N-isopropyl methacrylamide) (pNIPMAm) are synthesized by radical polymerization covering the molar mass range from about 20,000 to 150,000 kg mol−1, and their thermoresponsive and solvent-responsive behaviors in aqueous solution are studied. Both polymers feature a lower critical solution temperature (LCST) apparently of the rare so-called type II, as characteristic for their well-studied analogue poly(N-isopropyl acrylamide) (pNIPAm). Moreover, in analogy to pNIPAm, both polymers exhibit co-nonsolvency behavior in mixtures of water with several co-solvents, including short-chain alcohols as well as a range of polar aprotic solvents. While the cloud points of the aqueous solutions are a few degrees higher than those for pNIPAm and increase in the order pNIPAm < pNVIBAm < pNIPMAm, the co-nonsolvency behavior becomes less pronounced in the order pNIPAm > pNVIBAm > pNIPMAm. Exceptionally, pNIPMAm does not show co-nonsolvency in mixtures of water and N,N-dimethylformamide.

Graphical Abstract

Achieving Functionality and Multifunctionality through Bulk and Interfacial Structuring of Colloidal-Crystal-Templated Materials

Over the past 25 years, the field of colloidal crystal templating of inverse opal or three-dimensionally ordered macroporous (3DOM) structures has made tremendous progress. The degree of structural control over multiple length scales, understanding of mechanical properties, and complexity of systems in which 3DOM materials are a component have increased substantially. In addition, we are now seeing applications of 3DOM materials that make use of multiple features of their architecture at the same time. This Feature Article focuses on the different properties of 3DOM materials that provide functionality, including a relatively large surface area, the interconnectedness of the pores and the resulting good accessibility of the internal surface, the nanostructured features of the walls, the structural hierarchy and periodicity, well-defined surface roughness, and relative mechanical robustness at low density. It provides representative examples that illustrate the properties of interest related to applications including energy storage and conversion systems, sensors, catalysts, sorbents, photonics, actuators, and biomedical materials or devices.

The Fabrication of Full Chromatography SiO2@PDA Photonic Crystal Structural Colored Fabric with High Thermal Stability

Traditional textile dyeing and finishing industries are two of the most important sources of high pollution, high energy consumption, and high emissions. Structural color, as a clean ecological staining method that does not require any dye or pigment, has received extreme attention from researchers. In this study, core-shell structures of SiO2@PDA microspheres were prepared by coating polydopamine (PDA) formed by rapid polymerization of dopamine (DA) on the surface of SiO2 microspheres. Moreover, the structural colors of full chromatography were successfully prepared by vertical self-assembly on silk. The morphology and chemical structure of the prepared SiO2@PDA microspheres were studied by SEM and FT-IR, and the morphology and optical properties of the structured colored fabrics were characterized by SEM and material microscope. The different structural colors of the entire visible region were obtained by controlling the particle size of SiO2@PDA microspheres and the viewing angle of the SiO2@PDA photonic crystal, which are consistent with Bragg’s diffraction law. Since the SiO2@PDA photonic crystal has thermal stability, the prepared structural color fabric could remain highly saturated in color at temperatures up to 200 °C. This has a previously unreported high thermal stability on structural colors of silk. Therefore, the research work will demonstrate a structural color fabric that can prepare full chromatography with high thermal stability.

Bioinspired Polypeptide Photonic Films with Tunable Structural Color

We report a new synthetic strategy of combining N-carboxyanhydride (NCA) chemistry and photonic crystals for the fabrication of polypeptide structural color films. Driven by surface-initiated ring-opening polymerization, the di-NCA derivative of l-cystine (Cys) is introduced to replicate the functionalized colloidal crystal templates and construct freestanding P(Cys) films with tunable structural color. Furthermore, the feasibility of preparing patterned polypeptide photonic films is demonstrated via template microfabrication. Because of the incorporation of l-glutamate (Glu) components, the P(Cys-co-Glu) co-polypeptide films are endowed with a visual color responsiveness toward pH changes. Additionally, the polypeptide photonic films show on-demand degradability. Given the large family of amino acid building blocks, this powerful and versatile approach paves the way for chemical derivatization of multifunctional peptide-based optical platforms.

Colloidal Self-Assembly Approaches to Smart Nanostructured Materials

Colloidal self-assembly refers to a solution-processed assembly of nanometer-/micrometer-sized, well-dispersed particles into secondary structures, whose collective properties are controlled by not only nanoparticle property but also the superstructure symmetry, orientation, phase, and dimension. This combination of characteristics makes colloidal superstructures highly susceptible to remote stimuli or local environmental changes, representing a prominent platform for developing stimuli-responsive materials and smart devices. Chemists are achieving even more delicate control over their active responses to various practical stimuli, setting the stage ready for fully exploiting the potential of this unique set of materials. This review addresses the assembly of colloids into stimuli-responsive or smart nanostructured materials. We first delineate the colloidal self-assembly driven by forces of different length scales. A set of concepts and equations are outlined for controlling the colloidal crystal growth, appreciating the importance of particle connectivity in creating responsive superstructures. We then present working mechanisms and practical strategies for engineering smart colloidal assemblies. The concepts underpinning separation and connectivity control are systematically introduced, allowing active tuning and precise prediction of the colloidal crystal properties in response to external stimuli. Various exciting applications of these unique materials are summarized with a specific focus on the structure-property correlation in smart materials and functional devices. We conclude this review with a summary of existing challenges in colloidal self-assembly of smart materials and provide a perspective on their further advances to the next generation.

H2O- and ethanol concentration-responsive polymer/gel inverse opal photonic crystal

Responsive photonic crystals have attracted much attention due to their strong capability to manipulate the propagation of light in the visible region, but it is still a big challenge to invisibility and mechanical stability. Here, the novel Poly(ether sulfone)/Poly(acrylic acid) inverse opal photonic crystals, which have high mechanical stability and can release visible patterns after wetting with water, are discussed. The Poly(ether sulfone)/Poly(acrylic acid) inverse opal photonic crystals are also responsive to the concentration of ethanol, and the structural color response times increase with increasing ethanol concentration. This design uses the selective infiltration, hydrogen bonding and capillary action of solvent to realize the spectral diversity of reflectance. Owing to the high polarity and hydrogen bonding ability of carboxyl groups, water molecules are adsorbed easily by the poly(acrylic acid) gel. Subsequently, the encrypted information is decrypted due to the redshift of the structural color. Because of its lower polarity and hydrogen bonding ability relative to water, ethanol can impede the absorption of solvent by gel. Therefore, the ethanol concentration can be identified based on the structural color response time. Furthermore, reliable information decryption methods make Poly(ether sulfone)/Poly(acrylic acid) inverse opal photonic crystals potentially uesful as trusted encryption devices.

Perovskite Nanosheet Hydrogels with Mechanochromic Structural Color

Structural color colloidal sols of perovskite nanosheets were synthesized and were immobilized in a polymer hydrogel film by in situ photopolymerization, leading to a novel mechanochromic material. Visible absorption spectroscopy, polarized optical microscopy and small-angle X-ray scattering revealed that the nanosheets are aligned parallel to the film surface with the periodic distance of up to ca. 300 nm, giving the structural color tunable over full color range. The present structural color gel showed reversible mechanochromic response that detects weak stress of 1 kPa with the quick response time less than 1 ms as well as high mechanical toughness (compressive breaking stress of up to 3 MPa). These excellent properties are suitable for applications for mechano-sensors and displays.

Dynamic multimodal holograms of conjugated organogels via dithering mask lithography

Polymeric materials have been used to realize optical systems that, through periodic variations of their structural or optical properties, interact with light-generating holographic signals. Complex holographic systems can also be dynamically controlled through exposure to external stimuli, yet they usually contain only a single type of holographic mode. Here, we report a conjugated organogel that reversibly displays three modes of holograms in a single architecture. Using dithering mask lithography, we realized two-dimensional patterns with varying cross-linking densities on a conjugated polydiacetylene. In protic solvents, the organogel contracts anisotropically to develop optical and structural heterogeneities along the third dimension, displaying holograms in the form of three-dimensional full parallax signals, both in fluorescence and bright-field microscopy imaging. In aprotic solvents, these heterogeneities diminish as organogels expand, recovering the two-dimensional periodicity to display a third hologram mode based on iridescent structural colours. Our study presents a next-generation hologram manufacturing method for multilevel encryption technologies.

Biomimetic Nanopillar-Based Biosensor for Label-Free Detection of Influenza A Virus

Since the first emergence of influenza viruses, they have caused the flu seasonally worldwide. Precise detection of influenza viruses is required to prevent the spreading of the disease. Herein, we developed an optical biosensor using peptide-immobilized nanopillar structures for the label-free detection of influenza viruses. The spin-on-glass nanopillar structures were fabricated by nanoimprint lithography. A sialic acid-mimic peptide, which can specifically bind to hemagglutinin on the surface of the influenza virus, was immobilized onto the nanopillars via polymerized dopamine. The constructed nanopillar sensor enabled us to detect influenza A viruses in the range of 10³-10⁵ plaque-forming units through simple measurements of reflectance. Our findings suggest that biomimetic modification of nanopillar structures can be an alternative method for the immunodiagnosis of influenza viruses.

Co-nonsolvency in concentrated aqueous solutions of PNIPAM: effect of methanol on the collective and the chain dynamics

The polymer dynamics in concentrated solutions of poly(N-isopropyl acrylamide) (PNIPAM) in D2O/CD3OD mixtures is investigated in the one-phase region. Two polymer concentrations (9 and 25 wt%) and CD3OD contents in the solvent mixture of 0, 10 and 15 vol% are chosen. Temperature-resolved dynamic light scattering (DLS) reveals the collective dynamics. Two modes are observed, namely the fast relaxation of polymer segments within the blobs and the slow collective relaxation of the blobs. As the cloud point is approached, the correlation length related to the fast mode increases with CD3OD content. It features critical scaling behavior, which is consistent with mean-field behavior for the 9 wt% PNIPAM solution in pure D2O and with 3D Ising behavior for all other solutions. While the slow mode is not very strong in the 9 wt% PNIPAM solution in pure D2O, it is significantly more prominent as CD3OD is added and at all CD3OD contents in the 25 wt% solution, which may be attributed to enhanced interaction between the polymers. Neutron spin-echo spectroscopy (NSE) reveals a decay in the intermediate structure factor which indicates a diffusive process. For the polymer concentration of 9 wt%, the diffusion coefficients from NSE are similar to the ones from the fast relaxation observed in DLS. In contrast, they are significantly lower for the solutions having a polymer concentration of 25 wt%, which is attributed to the influence of the dominant large-scale dynamic heterogeneities. To summarize, addition of cosolvent leads to enhanced large-scale heterogeneities, which are reflected in the dynamic behavior at small length scales.

Poly(N,N-bis(2-methoxyethyl)acrylamide), a thermoresponsive non-ionic polymer combining the amide and the ethyleneglycolether motifs

Poly(N,N-bis(2-methoxyethyl)acrylamide) (PbMOEAm) featuring two classical chemical motifs from non-ionic water-soluble polymers, namely, the amide and ethyleneglycolether moieties, was synthesized by reversible addition fragmentation transfer (RAFT) polymerization. This tertiary polyacrylamide is thermoresponsive exhibiting a lower critical solution temperature (LCST)–type phase transition. A series of homo- and block copolymers with varying molar masses but low dispersities and different end groups were prepared. Their thermoresponsive behavior in aqueous solution was analyzed via turbidimetry and dynamic light scattering (DLS). The cloud points (CP) increased with increasing molar masses, converging to 46 °C for 1 wt% solutions. This rise is attributed to the polymers’ hydrophobic end groups incorporated via the RAFT agents. When a surfactant-like strongly hydrophobic end group was attached using a functional RAFT agent, CP was lowered to 42 °C, i.e., closer to human body temperature. Also, the effect of added salts, in particular, the role of the Hofmeister series, on the phase transition of PbMOEAm was investigated, exemplified for the kosmotropic fluoride, intermediate chloride, and chaotropic thiocyanate anions. A pronounced shift of the cloud point of about 10 °C to lower or higher temperatures was observed for 0.2 M fluoride and thiocyanate, respectively. When PbMOEAm was attached to a long hydrophilic block of poly(N,N-dimethylacrylamide) (PDMAm), the cloud points of these block copolymers were strongly shifted towards higher temperatures. While no phase transition was observed for PDMAm-b-pbMOEAm with short thermoresponsive blocks, block copolymers with about equally sized PbMOEAm and PDMAm blocks underwent the coil-to-globule transition around 60 °C.

Thermal Responsive Photonic Crystal Achieved through the Control of Light Path Guided by Phase Transition

Responsive photonic crystal is widely considered in the field of anti-counterfeiting and information encryption because of their structural color changes caused by external stimulation. However, the response signal is usually achieved by adjusting the periodic lattice constant based on Bragg's law with volume changes. Thus, it is a great challenge to achieve the response of photonic crystals by non-array parameter control. Herein, novel thermal responsive photonic crystal (TRPC) with low angle dependent structural color is fabricated by introducing poly(ethylene glycol) into the structure of low angle dependent SnO₂ inverse opal. The response is achieved through the control of light path guided by phase transition and the significant volume change caused by the change of traditional array parameters can be effectively avoided. Meanwhile, the low angle dependent structural color of TRPC can effectively reduce the interference of observation angle change to response signal caused by external thermal stimulation. Patterned responsive photonic crystals with temperature gradient response are easily obtained by combining confinement self-assembly and direct template method, and the patterns can be presented and hidden by the control of light path, showing great potential in anti-counterfeiting and information encryption fields.

Enzyme Responsive Inverse Opal Hydrogels

Structured color in nature is controlled by nano- and micro-structured interfaces giving rise to a photonic bandgap. This study presents a biomimetic optical material based on polymeric inverse opals that respond to enzyme activity. Polymer colloids provide a template in which acryloyl-functionalized poly(ethylene glycol) is integrated; dissolution of the colloids leads to a hydrogel inverse opal that can be lithographically patterned using transfer printing. Incorporating enzyme substrates within the voids provides a material that responds to the presence of proteases through a shift in the optical properties.

An acid-degradable biobased epoxy-imine adaptable network polymer for the fabrication of responsive structural color film

A reprocessable, acid-degradable epoxy-imine network polymer was fabricated based on an epoxide of vanillin, and it was used to prepare a composite film with structural color.

Double trouble for viruses: a hydrogel nanocomposite catches the influenza virus while shrinking and changing color

We report a virus responsive hydrogel with a dual response.

Thermal-Responsive Photonic Crystal with Function of Color Switch Based on Thermochromic System

Responsive photonic crystals have attracted considerable attention. The responsiveness is usually achieved through the variation of reflection wavelengths based on Bragg diffraction. However, distinguishing external stimuli from intrinsic angle dependence is a challenge. Herein, a novel thermal-responsive photonic crystal was constructed based on the synergistic effect of the low-angle dependence of SnO₂ inverse opals and a thermochromic phase change system. The organic thermochromic phase change system was obtained by mixing the fluoran dye (heat-sensitive red TF-R₂), bisphenol A, and aliphatic alcohols in a certain proportion. By filling the thermochromic phase change system into SnO₂ inverse opals, the thermal-responsive photonic crystal was fabricated. Through simple external thermal stimulation, the mutual transformation of low-angle-dependent structural color and pigmentary color is realized and inverse opal patterns can be displayed and hidden. The proposed system, while preventing the interference of the observation angle to the thermal stimulation, shows potential application prospect in the fields of anti-counterfeiting and information encryption fields.

Carbon dot-based inverse opal hydrogels with photoluminescence: dual-mode sensing of solvents and metal ions

A dual-mode sensing platform, involving fluorescence and reflectance modes, has been demonstrated for highly sensitive and selective detection of solvents and metal ions based on carbon dot-based inverse opal hydrogels (CD-IOHs). In this work, CD-IOHs have been first synthesized via the typical templating technique. Two kinds of CDs, including solvent and Cu(ii) ion sensitive CDs, have been incorporated into the matrix of IOHs during the co-polymerization of acrylic acid (AA) and 2-hydroxyethyl methacrylate (HEMA). The CD-IOHs not only appear green under daylight but also exhibit stable photoluminescence (PL) under UV light owing to the stop-band effect of photonic crystals and the quantum effect of CDs, respectively. By using these two optical phenomena, for solvent sensing, the CD-IOHs change their colors from green, yellow, and red to a semitransparent state and show good linear sensing with the ethanol content varying from 0 to 45% in reflectance mode, while their PL intensities exhibit a nonlinear detection trend: first an increase and then a decrease with the ethanol content in fluorescence mode. Remarkably, as for metal ion sensing, the CD-IOHs have high selectivity for Cu(ii) ions via the specific PL quenching effect of Cu(ii) ion sensitive CDs. Furthermore, the CD-IOHs show good linear detection in both modes and a wide linear detection range from 0.1 μM to 7 mM. Thus, high selectivity, colorimetric detection, a broad linear detection range, and dual-mode sensing can be realized using the CD-IOHs.

Chameleon-Inspired Strain-Accommodating Smart Skin

Stimuli-responsive color-changing hydrogels, commonly colored using embedded photonic crystals (PCs), have potential applications ranging from chemical sensing to camouflage and anti-counterfeiting. A major limitation in these PC hydrogels is that they require significant deformation (>20%) in order to change the PC lattice constant and generate an observable chromatic shift (∼100 nm). By analyzing the mechanism of how chameleon skin changes color, we developed a strain-accommodating smart skin (SASS), which maintains near-constant size during chromatic shifting. SASS is composed of two types of hydrogels: a stimuli-responsive, PC-containing hydrogel that is patterned within a second hydrogel with robust mechanical properties, which permits strain accommodation. In contrast to conventional "accordion"-type PC responsive hydrogels, SASS maintains near-constant volume during chromatic shifting. Importantly, SASS materials are stretchable (strain ∼150%), amenable to patterning, spectrally tunable, and responsive to both heat and natural sunlight. We demonstrate examples of using SASS for biomimicry. Our strategy, to embed responsive materials within a mechanically matched scaffolding polymer, provides a general framework to guide the future design of artificial smart skins.

Switch It Inside-Out: "Schizophrenic" Behavior of All Thermoresponsive UCST-LCST Diblock Copolymers

This feature article reviews our recent advancements on the synthesis, phase behavior, and micellar structures of diblock copolymers consisting of oppositely thermoresponsive blocks in aqueous environments. These copolymers combine a nonionic block, which shows lower critical solution temperature (LCST) behavior, with a zwitterionic block that exhibits an upper critical solution temperature (UCST). The transition temperature of the latter class of polymers is strongly controlled by its molar mass and by the salt concentration, in contrast to the rather invariant transition of nonionic polymers with type II LCST behavior such as poly(N-isopropylacrylamide) or poly(N-isopropyl methacrylamide). This allows for implementing the sequence of the UCST and LCST transitions of the polymers at will by adjusting either molecular or, alternatively, physical parameters. Depending on the location of the transition temperatures of both blocks, different switching scenarios are realized from micelles to inverse micelles, namely via the molecularly dissolved state, the aggregated state, or directly. In addition to studies of (semi)dilute aqueous solutions, highly concentrated systems have also been explored, namely water-swollen thin films. Concerning applications, we discuss the possible use of the diblock copolymers as "smart" nanocarriers.

Ultrathin Photonic Polymer Gel Films Templated by Non-Close-Packed Monolayer Colloidal Crystals to Enhance Colorimetric Sensing

Responsive polymer-based sensors have attracted considerable attention due to their ability to detect the presence of analytes and convert the detected signal into a physical and/or chemical change. High responsiveness, fast response speed, good linearity, strong stability, and small hysteresis are ideal, but to gain these properties at the same time remains challenging. This paper presents a facile and efficient method to improve the photonic sensing properties of polymeric gels by using non-close-packed monolayer colloidal crystals (ncp MCCs) as the template. Poly-(2-vinyl pyridine) (P2VP), a weak electrolyte, was selected to form the pH-responsive gel material, which was deposited onto ncp MCCs obtained by controlled O₂ plasma etching of close-packed (cp) MCCs. The resultant ultrathin photonic polymer gel film (UPPGF) exhibited significant improvement in responsiveness and linearity towards pH sensing compared to those prepared using cp MCCs template, achieving fast visualized monitoring of pH changes with excellent cyclic stability and small hysteresis loop. The responsiveness and linearity were found to depend on the volume and filling fraction of the polymer gel. Based on a simple geometric model, we established that the volume increased first and then decreased with the decrease of template size, but the filling fraction increased all the time, which was verified by microscopy observations. Therefore, the responsiveness and linearity of UPPGF to pH can be improved by simply adjusting the etching time of oxygen plasma. The well-designed UPPGF is reliable for visualized monitoring of analytes and their concentrations, and can easily be combined in sensor arrays for more accurate detection.

Color tunable pressure sensors based on polymer nanostructured membranes for optofluidic applications

We demonstrate an integrated optical pressure sensing platform for multiplexed optofluidics applications. The sensing platform consists in an array of elastomeric on-side nanostructured membranes -effectively 2D photonic crystal- which present colour shifts in response to mechanical stress that alter their nanostructure characteristical dimensions, pitch or orientation. The photonic membranes are prepared by a simple and cost-effective method based on the infiltration of a 2D colloidal photonic crystal (CPC) with PDMS and their integration with a microfluidic system. We explore the changes in the white light diffraction produced by the nanostructured membranes when varying the pneumatic pressure in the microfluidics channels as a way to achieve a power-free array of pressure sensors that change their reflective colour depending on the bending produced on each sensor. The structural characterization of these membranes was performed by SEM, while the optical properties and the pressure-colour relation were evaluated via UV-Vis reflection spectrometry. Maximum sensitivities of 0.17 kPa^-1 is obtained when measuring at Littrow configuration (θ_in = -θ_out), and close to the border of the membranes. The reflected colour change with pressure is as well monitorized by using a smartphone camera.

Recent advances in merging photonic crystals and plasmonics for bioanalytical applications

Photonic crystals (PhCs) and plasmonic nanostructures offer the unprecedented capability to control the interaction of light and biomolecules at the nanoscale. Based on PhC and plasmonic phenomena, a variety of analytical techniques have been demonstrated and successfully implemented in many fields, such as biological sciences, clinical diagnosis, drug discovery, and environmental monitoring. During the past decades, PhC and plasmonic technologies have progressed in parallel with their pros and cons. The merging of photonic crystals with plasmonics will significantly improve biosensor performances and enlarge the linear detection range of analytical targets. Here, we review the state-of-the-art biosensors that combine PhC and plasmonic nanomaterials for quantitative analysis. The optical mechanisms of PhCs, plasmonic crystals, and metal nanoparticles (NPs) are presented, along with their integration and potential applications. By explaining the optical coupling of photonic crystals and plasmonics, the review manifests how PhC-plasmonic hybrid biosensors can achieve the advantages, including high sensitivity, low cost, and short assay time as well. The review also discusses the challenges and future opportunities in this fascinating field.

Ultrafast assembly of nanoparticles to form smart polymeric photonic crystal films: a new platform for quick detection of solution compositions

Photonic crystals (PCs) are an important subset of photonic materials with specific optical properties, which can be utilized for structural color printing, anti-counterfeiting technologies, chemical sensors and so on. However, the fabrication of scalable, high-quality and uniform photonic crystal films at room temperature still remains a big challenge. Herein, a fast, energy efficient and scalable process is reported for the first time. A high-quality polymeric photonic crystal film can be fabricated from the uniform core/shell particle slurry within several seconds by a calendering process. The obtained crystalline structure can be rapidly captured by photo-curing, and the resultant PC films show extremely strong iridescent tunable structural colors. Because the as-designed PC film matrix is sensitive to solutions with different solubility parameters, a prototype demo sensor is firstly set up for quick detection of the composition of the alcohol/H2O mixture as a model of white spirits, which has the feature of reversible and linear quantitative sensing performance. In addition, the as-prepared PC film is further developed as an inexpensive test strip showing quick detection of ethanol/octane mixtures (possessing different solubility parameters) as a model of ethanol gasoline. This facile, scalable and energy efficient fabrication procedure is exceedingly promising for high-throughput production, showing great potential for industrialization of PC sensors and detectors. The combination of uniform particles and a dispersion medium can be potentially designed for different stimuli responsive systems, which is beneficial for applications ranging from sensing, anti-counterfeiting, to some special optical devices.

Exploring the Long-Term Hydrolytic Behavior of Zwitterionic Polymethacrylates and Polymethacrylamides

The hydrolytic stability of polymers to be used for coatings in aqueous environments, for example, to confer anti-fouling properties, is crucial. However, long-term exposure studies on such polymers are virtually missing. In this context, we synthesized a set of nine polymers that are typically used for low-fouling coatings, comprising the well-established poly(oligoethylene glycol methylether methacrylate), poly(3-(N-2-methacryloylethyl-N,N-dimethyl) ammoniopropanesulfonate) ("sulfobetaine methacrylate"), and poly(3-(N-3-methacryamidopropyl-N,N-dimethyl)ammoniopropanesulfonate) ("sulfobetaine methacrylamide") as well as a series of hitherto rarely studied polysulfabetaines, which had been suggested to be particularly hydrolysis-stable. Hydrolysis resistance upon extended storage in aqueous solution is followed by ¹H NMR at ambient temperature in various pH regimes. Whereas the monomers suffered slow (in PBS) to very fast hydrolysis (in 1 M NaOH), the polymers, including the polymethacrylates, proved to be highly stable. No degradation of the carboxyl ester or amide was observed after one year in PBS, 1 M HCl, or in sodium carbonate buffer of pH 10. This demonstrates their basic suitability for anti-fouling applications. Poly(sulfobetaine methacrylamide) proved even to be stable for one year in 1 M NaOH without any signs of degradation. The stability is ascribed to a steric shielding effect. The hemisulfate group in the polysulfabetaines, however, was found to be partially labile.

Order-Disorder Transition in Doped Microgel Colloidal Crystals and Its Application for Optical Sensing

Hydrogel photonic crystal-based optical sensors usually can only be used as free-standing films. Here, a doped microgel colloidal crystal film was developed as glucose sensor, which exploits structural order-disorder transition, instead of change in lattice constant, to report an analyte. Changing glucose concentration induces a change in structural order degree in the crystal and hence a change in the intensity of the stop band, and thus reports glucose concentration in the media. The response is fast and reversible. As the overall swelling degree of the gel does not change, it can be used as substrate-attached film.

Chromogenic Photonic Crystal Sensors Enabled by Multistimuli-Responsive Shape Memory Polymers

Here novel chromogenic photonic crystal sensors based on smart shape memory polymers (SMPs) comprising polyester/polyether-based urethane acrylates blended with tripropylene glycol diacrylate are reported, which exhibit nontraditional all-room-temperature shape memory (SM) effects. Stepwise recovery of the collapsed macropores with 350 nm diameter created by a "cold" programming process leads to easily perceived color changes that can be correlated with the concentrations of swelling analytes in complex, multicomponent nonswelling mixtures. High sensitivity (as low as 10 ppm) and unprecedented measurement range (from 10 ppm to 30 vol%) for analyzing ethanol in octane and gasoline have been demonstrated by leveraging colorimetric sensing in both liquid and gas phases. Proof-of-concept tests for specifically detecting ethanol in consumer medical and healthcare products have also been demonstrated. These sensors are inexpensive, reusable, durable, and readily deployable with mobile platforms for quantitative analysis. Additionally, theoretical modeling of solvent diffusion in macroporous SMPs provides fundamental insights into the mechanisms of nanoscopic SM recovery, which is a topic that has received little examination. These novel sensors are of great technological importance in a wide spectrum of applications ranging from environmental monitoring and workplace hazard identification to threat detection and process/product control in chemical, petroleum, and pharmaceutical industries.

An Antibody-Immobilized Silica Inverse Opal Nanostructure for Label-Free Optical Biosensors

Three-dimensional SiO₂-based inverse opal (SiO₂-IO) nanostructures were prepared for use as biosensors. SiO₂-IO was fabricated by vertical deposition and calcination processes. Antibodies were immobilized on the surface of SiO₂-IO using 3-aminopropyl trimethoxysilane (APTMS), a succinimidyl-[(N-maleimidopropionamido)-tetraethyleneglycol] ester (NHS-PEG₄-maleimide) cross-linker, and protein G. The highly accessible surface and porous structure of SiO₂-IO were beneficial for capturing influenza viruses on the antibody-immobilized surfaces. Moreover, as the binding leads to the redshift of the reflectance peak, the influenza virus could be detected by simply monitoring the change in the reflectance spectrum without labeling. SiO₂-IO showed high sensitivity in the range of 10³–10⁵ plaque forming unit (PFU) and high specificity to the influenza A (H1N1) virus. Due to its structural and optical properties, SiO₂-IO is a promising material for the detection of the influenza virus. Our study provides a generalized sensing platform for biohazards as various sensing strategies can be employed through the surface functionalization of three-dimensional nanostructures.

Analyte-Responsive Hydrogels: Intelligent Materials for Biosensing and Drug Delivery

Nature has mastered the art of molecular recognition. For example, using synergistic non-covalent interactions, proteins can distinguish between molecules and bind a partner with incredible affinity and specificity. Scientists have developed, and continue to develop, techniques to investigate and better understand molecular recognition. As a consequence, analyte-responsive hydrogels that mimic these recognitive processes have emerged as a class of intelligent materials. These materials are unique not only in the type of analyte to which they respond but also in how molecular recognition is achieved and how the hydrogel responds to the analyte. Traditional intelligent hydrogels can respond to environmental cues such as pH, temperature, and ionic strength. The functional monomers used to make these hydrogels can be varied to achieve responsive behavior. For analyte-responsive hydrogels, molecular recognition can also be achieved by incorporating biomolecules with inherent molecular recognition properties (e.g., nucleic acids, peptides, enzymes, etc.) into the polymer network. Furthermore, in addition to typical swelling/syneresis responses, these materials exhibit unique responsive behaviors, such as gel assembly or disassembly, upon interaction with the target analyte. With the diverse tools available for molecular recognition and the ability to generate unique responsive behaviors, analyte-responsive hydrogels have found great utility in a wide range of applications. In this Account, we discuss strategies for making four different classes of analyte-responsive hydrogels, specifically, non-imprinted, molecularly imprinted, biomolecule-containing, and enzymatically responsive hydrogels. Then we explore how these materials have been incorporated into sensors and drug delivery systems, highlighting examples that demonstrate the versatility of these materials. For example, in addition to the molecular recognition properties of analyte-responsive hydrogels, the physicochemical changes that are induced upon analyte binding can be exploited to generate a detectable signal for sensing applications. As research in this area has grown, a number of creative approaches for improving the selectivity and sensitivity (i.e., detection limit) of these sensors have emerged. For applications in drug delivery systems, therapeutic release can be triggered by competitive molecular interactions or physicochemical changes in the network. Additionally, including degradable units within the network can enable sustained and responsive therapeutic release. Several exciting examples exploiting the analyte-responsive behavior of hydrogels for the treatment of cancer, diabetes, and irritable bowel syndrome are discussed in detail. We expect that creative and combinatorial approaches used in the design of analyte-responsive hydrogels will continue to yield materials with great potential in the fields of sensing and drug delivery.

Ionic Strength Responsive Sulfonated Polystyrene Opals

Stimuli-responsive photonic crystals (PCs) represent an intriguing class of smart materials very promising for sensing applications. Here, selective ionic strength responsive polymeric PCs are reported. They are easily fabricated by partial sulfonation of polystyrene opals, without using toxic or expensive monomers and etching steps. The color of the resulting hydrogel-like ordered structures can be continuously shifted over the entire visible range (405-760 nm) by changing the content of ions over an extremely wide range of concentration (from about 70 μM to 4 M). The optical response is completely independent from pH and temperature, and the initial color can be fully recovered by washing the sulfonated opals with pure water. These new smart photonic materials could find important applications as ionic strength sensors for environmental monitoring as well as for healthcare screening.

Multiple Colors Output on Voile through 3D Colloidal Crystals with Robust Mechanical Properties

Distinguished from the chromatic mechanism of dyes and pigments, structural color is derived from physical interactions of visible light with structures that are periodic at the scale of the wavelength of light. Using colloidal crystals with coloring functions for fabrics has resulted in significant improvements compared with chemical colors because the structural color from colloidal crystals bears many unique and fascinating optical properties, such as vivid iridescence and nonphotobleaching. However, the poor mechanical performance of the structural color films cannot meet actual requirements because of the weak point contact of colloidal crystal particles. Herein, we demonstrate in this study the patterning on voile fabrics with high mechanical strength on account of the periodic array lock effect of polymers, and multiple structural color output was simultaneously achieved by a simple two-phase self-assembly method for printing voile fabrics with 3D colloidal crystals. The colored voile fabrics exhibit high color saturation, good mechanical stability, and multiple-color patterns printable. In addition, colloidal crystals are promising potential substitutes for organic dyes and pigments because colloidal crystals are environmentally friendly.

Post-synthetic modification of polyvinyl alcohol with a series of N-alkyl-substituted carbamates towards thermo and CO2-responsive polymers

Intensive efforts have been devoted to the synthesis of thermoresponsive polymers with terminal N-alkyl-substituted groups.

An ultrasensitive energy-transfer based photoelectrochemical protein biosensor

Using single stranded DNA (ssDNA) as a distance controller and Au nanoparticles (NPs) functionalized with ssDNA as novel energy-transfer nanoprobes, an ultrasensitive energy-transfer based photoelectrochemical protein biosensor was realized.

Thermoresponsive Polymers and Inverse Opal Hydrogels for the Detection of Diols

Responsive inverse opal hydrogels functionalized by boroxole moieties were synthesized and explored as sensor platforms for various low molar mass as well as polymeric diols and polyols, including saccharides, glycopolymers and catechols, by exploiting the diol induced modulation of their structural color. The underlying thermoresponsive water-soluble copolymers and hydrogels exhibit a coil-to-globule or volume phase transition, respectively, of the LCST-type. They were prepared from oligoethylene oxide methacrylate (macro)monomers and functionalized via copolymerization to bear benzoboroxole moieties. The resulting copolymers represent weak polyacids, which can bind specifically to diols within an appropriate pH window. Due to the resulting modulation of the overall hydrophilicity of the systems and the consequent shift of their phase transition temperature, the usefulness of such systems for indicating the presence of catechols, saccharides, and glycopolymers was studied, exploiting the diol/polyol induced shifts of the soluble polymers' cloud point, or the induced changes of the hydrogels' swelling. In particular, the increased acidity of benzoboroxoles compared to standard phenylboronic acids allowed performing the studies in PBS buffer (phosphate buffered saline) at the physiologically relevant pH of 7.4. The inverse opals constructed of these thermo- and analyte-responsive hydrogels enabled following the binding of specific diols by the induced shift of the optical stop band. Their highly porous structure enabled the facile and specific optical detection of not only low molar mass but also of high molar mass diol/polyol analytes such as glycopolymers. Accordingly, such thermoresponsive inverse opal systems functionalized with recognition units represent attractive and promising platforms for the facile sensing of even rather big analytes by simple optical means, or even by the bare eye.