1
|
Jie H, Feng K, Lu M, Jin Z. Modulation of Tannic Acid on the Cholesteric Structure of Cellulose Nanocrystals. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2024; 40:13834-13843. [PMID: 38920318 DOI: 10.1021/acs.langmuir.4c00767] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/27/2024]
Abstract
The chiral nematic phase structure, formed by the self-assembly of cellulose nanocrystals (CNCs) in an aqueous suspension and maintained in a solid film, shows great potential for optical applications. To achieve complex structures in optical devices, it is crucial to subject CNCs to specific shearing processes, such as spinning and printing. Understanding the structural and property changes of the CNC liquid crystal phase in these processes is of utmost importance. In this study, we investigated the effect of adding tannic acid (TA) on the rheological properties and cholesteric phase structures of CNCs/TA mixed suspensions. By calculating the surface site interaction points, we observed that TA can adsorb onto the surface of CNC rods in suspensions through hydrogen bonding. Through characterization techniques, such as polarized optical microscopy, rheology, and synchrotron SAXS, we examined the effects of TA addition on the microstructure and rheological properties of the CNC liquid crystal phase and clarified the change relating to the system composition. Under the same CNC concentration, the volume fraction of the anisotropic phase, the pitch, and the rod spacing of the cholesteric phase were not significantly affected by the addition of TA. However, the system viscosity was significantly reduced with the appropriate amount of TA (2 wt %), in a wide range of CNC concentrations (up to 15 wt % CNCs). The flow indexes (n) in Region I and Region III of steady-state shear curves of CNCs/TA systems (11-15 wt % CNCs) were compared. Moreover, we introduced the well-established theoretical models for liquid crystal polymers to tentatively interpret Region I of the CNCs/TA cholesteric phase and realized that increased numbers of smaller cholesteric-phase domains in the CNCs/TA system and interfacial modification by TA may contribute to the fluidity change. The feature of the domain texture of CNCs/TA systems is verified by polarized optical microscopy observations.
Collapse
Affiliation(s)
- Hui Jie
- Department of Chemistry, Renmin University of China, Beijing 100872, China
| | - Kai Feng
- Department of Chemistry, Renmin University of China, Beijing 100872, China
| | - Mengfan Lu
- Department of Chemistry, Renmin University of China, Beijing 100872, China
| | - Zhaoxia Jin
- Department of Chemistry, Renmin University of China, Beijing 100872, China
| |
Collapse
|
2
|
Jiaqi Y, Zhixiang W, Sirui C, Qiongya L, Yi Q, Hao W, Yuxiao H, Zhang F, Qing G. Large-scale production of chiral nematic microspheres. Chem Commun (Camb) 2024; 60:5856-5859. [PMID: 38752695 DOI: 10.1039/d4cc00120f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/31/2024]
Abstract
The membrane emulsification technique enables the self-assembly of cellulose nanocrystals (CNCs) confined within a spherical geometry for large-scale production. The resulting solid microspheres show long-range ordering with chiral nematic structures, and this fascinating hierarchical architecture can even be transferred to mesoporous carbon or silica microparticles by a sacrificial template method.
Collapse
Affiliation(s)
- Yu Jiaqi
- Hubei Key Laboratory of Biomass Fibers and Eco-dyeing & Finishing, College of Chemistry and Chemical Engineering, Wuhan Textile University, Wuhan 430200, P. R. China.
| | - Wang Zhixiang
- Hubei Key Laboratory of Biomass Fibers and Eco-dyeing & Finishing, College of Chemistry and Chemical Engineering, Wuhan Textile University, Wuhan 430200, P. R. China.
| | - Chen Sirui
- Hubei Key Laboratory of Biomass Fibers and Eco-dyeing & Finishing, College of Chemistry and Chemical Engineering, Wuhan Textile University, Wuhan 430200, P. R. China.
| | - Li Qiongya
- CAS Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023, P. R. China
| | - Qian Yi
- Hubei Key Laboratory of Biomass Fibers and Eco-dyeing & Finishing, College of Chemistry and Chemical Engineering, Wuhan Textile University, Wuhan 430200, P. R. China.
| | - Wang Hao
- Hubei Key Laboratory of Biomass Fibers and Eco-dyeing & Finishing, College of Chemistry and Chemical Engineering, Wuhan Textile University, Wuhan 430200, P. R. China.
| | - Huang Yuxiao
- Hubei Key Laboratory of Biomass Fibers and Eco-dyeing & Finishing, College of Chemistry and Chemical Engineering, Wuhan Textile University, Wuhan 430200, P. R. China.
| | - Fusheng Zhang
- Hubei Key Laboratory of Biomass Fibers and Eco-dyeing & Finishing, College of Chemistry and Chemical Engineering, Wuhan Textile University, Wuhan 430200, P. R. China.
- CAS Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023, P. R. China
| | - Guangyan Qing
- Hubei Key Laboratory of Biomass Fibers and Eco-dyeing & Finishing, College of Chemistry and Chemical Engineering, Wuhan Textile University, Wuhan 430200, P. R. China.
- CAS Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023, P. R. China
| |
Collapse
|
3
|
Frka-Petesic B, Parton TG, Honorato-Rios C, Narkevicius A, Ballu K, Shen Q, Lu Z, Ogawa Y, Haataja JS, Droguet BE, Parker RM, Vignolini S. Structural Color from Cellulose Nanocrystals or Chitin Nanocrystals: Self-Assembly, Optics, and Applications. Chem Rev 2023; 123:12595-12756. [PMID: 38011110 PMCID: PMC10729353 DOI: 10.1021/acs.chemrev.2c00836] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/29/2022] [Indexed: 11/29/2023]
Abstract
Widespread concerns over the impact of human activity on the environment have resulted in a desire to replace artificial functional materials with naturally derived alternatives. As such, polysaccharides are drawing increasing attention due to offering a renewable, biodegradable, and biocompatible feedstock for functional nanomaterials. In particular, nanocrystals of cellulose and chitin have emerged as versatile and sustainable building blocks for diverse applications, ranging from mechanical reinforcement to structural coloration. Much of this interest arises from the tendency of these colloidally stable nanoparticles to self-organize in water into a lyotropic cholesteric liquid crystal, which can be readily manipulated in terms of its periodicity, structure, and geometry. Importantly, this helicoidal ordering can be retained into the solid-state, offering an accessible route to complex nanostructured films, coatings, and particles. In this review, the process of forming iridescent, structurally colored films from suspensions of cellulose nanocrystals (CNCs) is summarized and the mechanisms underlying the chemical and physical phenomena at each stage in the process explored. Analogy is then drawn with chitin nanocrystals (ChNCs), allowing for key differences to be critically assessed and strategies toward structural coloration to be presented. Importantly, the progress toward translating this technology from academia to industry is summarized, with unresolved scientific and technical questions put forward as challenges to the community.
Collapse
Affiliation(s)
- Bruno Frka-Petesic
- Yusuf
Hamied Department of Chemistry, University
of Cambridge, Lensfield Road, Cambridge CB2 1EW, United Kingdom
- International
Institute for Sustainability with Knotted Chiral Meta Matter (WPI-SKCM), Hiroshima University, 1-3-1 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8526, Japan
| | - Thomas G. Parton
- Yusuf
Hamied Department of Chemistry, University
of Cambridge, Lensfield Road, Cambridge CB2 1EW, United Kingdom
| | - Camila Honorato-Rios
- Department
of Sustainable and Bio-inspired Materials, Max Planck Institute of Colloids and Interfaces, Am Mühlenberg 1, 14476 Potsdam, Germany
| | - Aurimas Narkevicius
- B
CUBE − Center for Molecular Bioengineering, Technische Universität Dresden, 01307 Dresden, Germany
| | - Kevin Ballu
- Yusuf
Hamied Department of Chemistry, University
of Cambridge, Lensfield Road, Cambridge CB2 1EW, United Kingdom
| | - Qingchen Shen
- Yusuf
Hamied Department of Chemistry, University
of Cambridge, Lensfield Road, Cambridge CB2 1EW, United Kingdom
| | - Zihao Lu
- Yusuf
Hamied Department of Chemistry, University
of Cambridge, Lensfield Road, Cambridge CB2 1EW, United Kingdom
| | - Yu Ogawa
- CERMAV-CNRS,
CS40700, 38041 Grenoble cedex 9, France
| | - Johannes S. Haataja
- Department
of Applied Physics, Aalto University School
of Science, P.O. Box
15100, Aalto, Espoo FI-00076, Finland
| | - Benjamin E. Droguet
- Yusuf
Hamied Department of Chemistry, University
of Cambridge, Lensfield Road, Cambridge CB2 1EW, United Kingdom
| | - Richard M. Parker
- Yusuf
Hamied Department of Chemistry, University
of Cambridge, Lensfield Road, Cambridge CB2 1EW, United Kingdom
| | - Silvia Vignolini
- Yusuf
Hamied Department of Chemistry, University
of Cambridge, Lensfield Road, Cambridge CB2 1EW, United Kingdom
| |
Collapse
|
4
|
Kim WS, Im JH, Kim H, Choi JK, Choi Y, Kim YK. Liquid Crystalline Systems from Nature and Interaction of Living Organisms with Liquid Crystals. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2204275. [PMID: 35861641 DOI: 10.1002/adma.202204275] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/11/2022] [Revised: 07/15/2022] [Indexed: 06/15/2023]
Abstract
Biomaterials, which are substances interacting with biological systems, have been extensively explored to understand living organisms and obtain scientific inspiration (such as biomimetics). However, many aspects of biomaterials have yet to be fully understood. Because liquid crystalline phases are ubiquitously found in biomaterials (e.g., cholesterol, amphiphile, DNA, cellulose, bacteria), therefore, a wide range of research has made attempts to approach unresolved issues with the concept of liquid crystals (LCs). This review presents these studies that address the interactive correlation between biomaterials and LCs. Specifically, intrinsic LC behavior of various biomaterials such as DNA, cellulose nanocrystals, and bacteriaare first introduced. Second, the dynamics of bacteria in LC media are addressed, with focus on how bacteria interact with LCs, and how dynamics of bacteria can be controlled by exploiting the characteristics of LCs. Lastly, how the strong correlation between LCs and biomaterials has been leveraged to design a new class of biosensors with additional functionalities (e.g., self-regulated drug release) that are not available in previous systems is reviewed. Examples addressed in this review convey the message that the intersection between biomaterials and LCs offers deep insights into fundamental understanding of biomaterials, and provides resources for development of transformative technologies.
Collapse
Affiliation(s)
- Won-Sik Kim
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea
| | - Jun-Hyung Im
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea
| | - Hyein Kim
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea
| | - Jin-Kang Choi
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea
| | - Yena Choi
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea
| | - Young-Ki Kim
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea
| |
Collapse
|
5
|
Parker RM, Zhao TH, Frka-Petesic B, Vignolini S. Cellulose photonic pigments. Nat Commun 2022; 13:3378. [PMID: 35697688 PMCID: PMC9192732 DOI: 10.1038/s41467-022-31079-9] [Citation(s) in RCA: 28] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/29/2021] [Accepted: 06/01/2022] [Indexed: 11/09/2022] Open
Abstract
When pursuing sustainable approaches to fabricate photonic structures, nature can be used as a source of inspiration for both the nanoarchitecture and the constituent materials. Although several biomaterials have been promised as suitable candidates for photonic materials and pigments, their fabrication processes have been limited to the small to medium-scale production of films. Here, by employing a substrate-free process, structurally coloured microparticles are produced via the confined self-assembly of a cholesteric cellulose nanocrystal (CNC) suspension within emulsified microdroplets. Upon drying, the droplets undergo multiple buckling events, which allow for greater contraction of the nanostructure than predicted for a spherical geometry. This buckling, combined with a solvent or thermal post-treatment, enables the production of dispersions of vibrant red, green, and blue cellulose photonic pigments. The hierarchical structure of these pigments enables the deposition of coatings with angular independent colour, offering a consistent visual appearance across a wide range of viewing angles.
Collapse
Affiliation(s)
- Richard M Parker
- Yusuf Hamied Department of Chemistry, University of Cambridge, Lensfield Road, Cambridge, CB2 1EW, UK
| | - Tianheng H Zhao
- Yusuf Hamied Department of Chemistry, University of Cambridge, Lensfield Road, Cambridge, CB2 1EW, UK
| | - Bruno Frka-Petesic
- Yusuf Hamied Department of Chemistry, University of Cambridge, Lensfield Road, Cambridge, CB2 1EW, UK
| | - Silvia Vignolini
- Yusuf Hamied Department of Chemistry, University of Cambridge, Lensfield Road, Cambridge, CB2 1EW, UK.
| |
Collapse
|
6
|
Momeni A, Hamad WY, MacLachlan MJ. Using rotation to organize cellulose nanocrystals inside a fiber. NANOSCALE 2022; 14:7613-7620. [PMID: 35545099 DOI: 10.1039/d2nr01159j] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
We demonstrate for the first time that continuous rotation of a mixture of cellulose nanocrystals (CNCs) and monomer in a capillary tube results in well-organized structures. In the experiments, a capillary tube charged with an aqueous suspension of CNCs and hydroxyethyl acrylate was continuously rotated, then the structure was fixed in place by UV-initiated polymerization. The organization of the liquid crystalline structure that forms inside the tube depends on the rotation conditions and is captured in the polymer resin. The effects of rotation speed, rotation angle and CNC concentration were evaluated and are discussed based on fluid dynamic models. We demonstrate that it is possible to develop a core-shell fiber through this technique based on secondary Dean flow. The outer shell of the fiber shows well-ordered concentric rings with chiral nematic structure, while the inner core remains isotropic. Such fibers have potential applications in the field of optics. Overall, we demonstrate that rotation could be applied as a novel method to organize liquid crystals in a confined environment.
Collapse
Affiliation(s)
- Arash Momeni
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, British Columbia V6T 1Z1, Canada.
| | - Wadood Y Hamad
- Transformation and Interfaces Group, Bioproducts Innovation Centre of Excellence, FPInnovations, 2665 East Mall, Vancouver, British Columbia V6T 1Z4, Canada
| | - Mark J MacLachlan
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, British Columbia V6T 1Z1, Canada.
- Stewart Blusson Quantum Matter Institute, 2355 East Mall, Vancouver, British Columbia, V6T 1Z4, Canada
- WPI Nano Life Science Institute, Kanazawa University, Kanazawa, 920-1192, Japan
- UBC BioProducts Institute, 2385 East Mall, Vancouver, British Columbia, V6T 1Z4, Canada
| |
Collapse
|
7
|
Nikam S, S. K A. Enantioselective Separation of Amino Acids Using Chiral Polystyrene Microspheres Synthesized by a Post-Polymer Modification Approach. ACS POLYMERS AU 2022; 2:257-265. [PMID: 36855562 PMCID: PMC9955280 DOI: 10.1021/acspolymersau.2c00004] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
The enantioselective separation of a racemic mixture of amino acids was achieved by chiral amino acid-modified polystyrene (PS) that was developed by a post-polymer modification approach. Styrene was polymerized using the reversible addition-fragmentation chain-transfer (RAFT) polymerization technique and further post-polymer modification was applied by Friedel-Crafts acylation reaction with chiral N-phthaloyl-l-leucine acid chloride to obtain the protected PS-l-Leu. The chiral PS (protected PS-l-Leu) was assembled into microspheres using a surfactant and was used for carrying out the enantioselective separation of amino acid racemic mixtures by enantioselective adsorption followed by a simple filtration process. Compared to as-precipitated chiral PS (protected PS-l-Leu) powder, the protected PS-l-Leu microspheres exhibited a better enantioselective separation efficiency (ee %). Furthermore, the protected PS-l-Leu was deprotected to obtain the amine-functionalized deprotected PS-l-Leu chiral PS, which was also assembled into microspheres and used for carrying out enantioselective separation. Deprotected PS-l-Leu-functionalized chiral PS microspheres could achieve up to 81.6 ee % for the enantioselective separation of a racemic mixture of leucine. This is one of the first reports of the synthesis of amino acid-modified chiral PS microspheres and their application to the simple filtration-based enantioselective separation of native amino acids from their racemic mixtures.
Collapse
Affiliation(s)
- Shrikant
B. Nikam
- Polymer
Science and Engineering Division, CSIR-National
Chemical Laboratory, Dr. Homi Bhabha Road, Pashan, Pune 411008, India,Academy
of Scientific and Innovative Research, Sector 19, Kamla Nehru Nagar, Ghaziabad, 201002 Uttar
Pradesh, India
| | - Asha S. K
- Polymer
Science and Engineering Division, CSIR-National
Chemical Laboratory, Dr. Homi Bhabha Road, Pashan, Pune 411008, India,Academy
of Scientific and Innovative Research, Sector 19, Kamla Nehru Nagar, Ghaziabad, 201002 Uttar
Pradesh, India,. Fax: 0091-20-25902615
| |
Collapse
|
8
|
Lee SR, Reichmanis E, Srinivasarao M. Anisotropic Responsive Microgels Based on the Cholesteric Phase of Chitin Nanocrystals. ACS Macro Lett 2022; 11:96-102. [PMID: 35574788 DOI: 10.1021/acsmacrolett.1c00675] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Anisotropic stimuli-responsive microgels based upon the cholesteric phase of chitin nanocrystals and N-isopropylacrylamide were designed and synthesized. The cholesteric structure was interrogated, and the texture was shown to directly influence the microgel shape and anisotropy. Changes in the microgel volume led to changes in the texture, where microgels comprising up to six bands exhibited a twisted bipolar texture, while those with greater volumes displayed a concentric-packing structure. As designed, the imprinted cholesteric phase induced an asymmetric response to temperature, leading to a change in shape and optical properties. Furthermore, the cholesteric structure is able to deform, facilitating transport into a small channel. Access to synthetic structures having a self-assembled twisted texture derived from cholesterics embedded within a polymer matrix will provide guidelines for designing biopolymer composites with programmable motion.
Collapse
Affiliation(s)
- Sujin R. Lee
- School of Chemistry and Biochemistry, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| | - Elsa Reichmanis
- Department of Chemical & Biomolecular Engineering, Lehigh University, Bethlehem, Pennsylvania 18015, United States
| | - Mohan Srinivasarao
- School of Chemistry and Biochemistry, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
- School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| |
Collapse
|
9
|
Miyagi K, Teramoto Y. Construction of Functional Materials in Various Material Forms from Cellulosic Cholesteric Liquid Crystals. NANOMATERIALS (BASEL, SWITZERLAND) 2021; 11:2969. [PMID: 34835733 PMCID: PMC8621230 DOI: 10.3390/nano11112969] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/01/2021] [Revised: 11/01/2021] [Accepted: 11/03/2021] [Indexed: 01/29/2023]
Abstract
Wide use of bio-based polymers could play a key role in facilitating a more sustainable society because such polymers are renewable and ecofriendly. Cellulose is a representative bio-based polymer and has been used in various materials. To further expand the application of cellulose, it is crucial to develop functional materials utilizing cellulosic physicochemical properties that are acknowledged but insufficiently applied. Cellulose derivatives and cellulose nanocrystals exhibit a cholesteric liquid crystal (ChLC) property based on rigidity and chirality, and this property is promising for constructing next-generation functional materials. The form of such materials is an important factor because material form is closely related with function. To date, researchers have reported cellulosic ChLC materials with a wide range of material forms-such as films, gels, mesoporous materials, and emulsions-for diverse functions. We first briefly review the fundamental aspects of cellulosic ChLCs. Then we comprehensively review research on cellulosic ChLC functional materials in terms of their material forms. Thus, this review provides insights into the creation of novel cellulosic ChLC functional materials based on material form designed toward the expanded application of cellulosics.
Collapse
Affiliation(s)
- Kazuma Miyagi
- Department of Forest Resource Chemistry, Forestry and Forest Products Research Institute, Forest Research and Management Organization, 1 Matsunosato, Tsukuba 3058687, Ibaraki, Japan
| | - Yoshikuni Teramoto
- Division of Forest and Biomaterials Science, Graduate School of Agriculture, Kyoto University, Kitashirakawa Oiwake-cho, Sakyo-ku, Kyoto 6068502, Japan
| |
Collapse
|
10
|
Abstract
A bio-photonic cavity quantum electrodynamic (C-QED) framework could be imagined as a system in which both the “cavity” and the “atom” participating in the light-matter interaction scenario are bio-inspired. Can a cavity be made of a bio-polymer? If so, how should such a cavity appear and what are the best polymers to fabricate it? Can a bioluminescent material stand the comparison with new-fashion semiconductors? In this review we answer these fundamental questions to pave the way toward an eco-friendly paradigm, in which the ever-increasing demand for more performing quantum photonics technologies meets the ever-increasing yet silent demand of our planet to reduce our environmental footprint.
Collapse
|
11
|
Prince E, Wang Y, Smalyukh II, Kumacheva E. Cylindrical Confinement of Nanocolloidal Cholesteric Liquid Crystal. J Phys Chem B 2021; 125:8243-8250. [PMID: 34259528 DOI: 10.1021/acs.jpcb.1c04387] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
The organization of nanocolloidal liquid crystals in constrained geometries has fundamental and practical importance, since under confinement, liquid crystals contain stable topological defects that can serve as templates for nanoparticle organization. Three-dimensional confinement of cholesteric (Ch) liquid crystals formed by cellulose nanocrystals (CNCs) have been extensively studied; however, their two-dimensional confinement remains under-investigated. Here, we report the results of systematic experimental studies of two-dimensional confinement of Ch-CNC liquid crystal in cylindrical capillaries with varying inner diameters. Confinement resulted in phase separation of the Ch-CNC liquid crystal into a Ch shell formed by concentric CNC pseudolayers with the helicoidal axis perpendicular to the inner surface of the capillary walls, and a micrometer-diameter isotropic core thread running parallel to the long axis of the capillary. The morphology of the confined Ch-CNC liquid crystal varied when progressively increasing the degree confinement. Finally, we show that phase separation of the Ch-CNC liquid crystal into a Ch shell and an isotropic core is preserved in flexible capillary tubing, suggesting the applicability of this system for the fabrication of flexible optical waveguides.
Collapse
Affiliation(s)
- Elisabeth Prince
- Department of Chemistry, University of Toronto, 80 Saint George Street, Toronto, Ontario M5S 3H6, Canada
| | - Yongliang Wang
- College of Materials Science and Engineering, Harbin University of Science and Technology, Harbin 150040, China
| | - Ivan I Smalyukh
- Department of Physics and Soft Materials Research Center, University of Colorado, Boulder, Colorado 80309, United States.,Materials Science and Engineering Program, University of Colorado, Boulder, Colorado 80309, United States
| | - Eugenia Kumacheva
- Department of Chemistry, University of Toronto, 80 Saint George Street, Toronto, Ontario M5S 3H6, Canada.,Department of Chemical Engineering and Applied Chemistry, University of Toronto, 200 College Street, Toronto, Ontario M5S 3E5, Canada.,Institute of Biomaterials and Biomedical Engineering, University of Toronto, 4 Taddle Creek Road, Toronto, Ontario M5S 3G9, Canada
| |
Collapse
|
12
|
Wang X, Feng N, Shi Z, Zhou N, Lu J, Huang J, Gan L. Stimuli-responsive flexible membrane via co-assembling sodium alginate into assembly membranes of rod-like cellulose nanocrystals with an achiral array. Carbohydr Polym 2021; 262:117949. [PMID: 33838826 DOI: 10.1016/j.carbpol.2021.117949] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/13/2020] [Revised: 03/10/2021] [Accepted: 03/12/2021] [Indexed: 10/21/2022]
Abstract
Uniaxially assembling cellulose nanocrystals (CNCs) can induce strong solid-state emission based on optical inelastic scattering, whereas the CNC assembly membranes are not flexible enough for further applications. Thus, we introduced CNC into flexible sodium alginate (SA) and further controlled the assembly structure of CNC to increase the membrane toughness and maintain the emission properties. The results indicated that the stretchability increased from 0.027 % to 37 % when 33-37% when 33 % SA was introduced. The assembly achirality was controlled by tuning CNC concentration in suspension, and the co-assembly could further control the wavelength of the assembly-induced emission from 420 nm to 440 nm. Furthermore, the improved stretchability made assembly membrane an optical sensor, whose excitation wavelength blue-shifted about 30 nm under a 30 % strain. The emission of the co-assembly membrane could also respond to humidity, and this cellulose-based material should have great potential in biosensor and wearable devices.
Collapse
Affiliation(s)
- Xuhong Wang
- School of Chemistry and Chemical Engineering, and Chongqing Key Laboratory of Soft-Matter Material Chemistry and Function Manufacturing, Southwest University, Chongqing 400715, PR China
| | - Na Feng
- School of Chemistry and Chemical Engineering, and Chongqing Key Laboratory of Soft-Matter Material Chemistry and Function Manufacturing, Southwest University, Chongqing 400715, PR China
| | - Zhenxu Shi
- School of Chemistry and Chemical Engineering, and Chongqing Key Laboratory of Soft-Matter Material Chemistry and Function Manufacturing, Southwest University, Chongqing 400715, PR China
| | - Na Zhou
- School of Chemistry and Chemical Engineering, and Engineering Research Center of Materials-Oriented Chemical Engineering of Xinjiang Bintuan, Shihezi University, Shihezi 832003, PR China
| | - Jun Lu
- College of Food Science & Chemical Engineering, Hubei University of Arts and Science, Xiangyang 441003, PR China
| | - Jin Huang
- School of Chemistry and Chemical Engineering, and Chongqing Key Laboratory of Soft-Matter Material Chemistry and Function Manufacturing, Southwest University, Chongqing 400715, PR China; School of Chemistry and Chemical Engineering, and Engineering Research Center of Materials-Oriented Chemical Engineering of Xinjiang Bintuan, Shihezi University, Shihezi 832003, PR China; Joint International Research Laboratory of Biomass-Based Macromolecular Chemistry and Materials, Chongqing 400715, PR China.
| | - Lin Gan
- School of Chemistry and Chemical Engineering, and Chongqing Key Laboratory of Soft-Matter Material Chemistry and Function Manufacturing, Southwest University, Chongqing 400715, PR China; Joint International Research Laboratory of Biomass-Based Macromolecular Chemistry and Materials, Chongqing 400715, PR China.
| |
Collapse
|
13
|
Lamm ME, Li K, Qian J, Wang L, Lavoine N, Newman R, Gardner DJ, Li T, Hu L, Ragauskas AJ, Tekinalp H, Kunc V, Ozcan S. Recent Advances in Functional Materials through Cellulose Nanofiber Templating. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2005538. [PMID: 33565173 DOI: 10.1002/adma.202005538] [Citation(s) in RCA: 36] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/14/2020] [Revised: 10/05/2020] [Indexed: 06/12/2023]
Abstract
Advanced templating techniques have enabled delicate control of both nano- and microscale structures and have helped thrust functional materials into the forefront of society. Cellulose nanomaterials are derived from natural polymers and show promise as a templating source for advanced materials. Use of cellulose nanomaterials in templating combines nanoscale property control with sustainability, an attribute often lacking in other templating techniques. Use of cellulose nanofibers for templating has shown great promise in recent years, but previous reviews on cellulose nanomaterial templating techniques have not provided extensive analysis of cellulose nanofiber templating. Cellulose nanofibers display several unique properties, including mechanical strength, porosity, high water retention, high surface functionality, and an entangled fibrous network, all of which can dictate distinctive aspects in the final templated materials. Many applications exploit the unique aspects of templating with cellulose nanofibers that help control the final properties of the material, including, but not limited to, applications in catalysis, batteries, supercapacitors, electrodes, building materials, biomaterials, and membranes. A detailed analysis on the use of cellulose nanofibers templating is provided, addressing specifically how careful selection of templating mechanisms and methodologies, combined toward goal applications, can be used to directly benefit chosen applications in advanced functional materials.
Collapse
Affiliation(s)
- Meghan E Lamm
- Manufacturing Demonstration Facility, Energy and Transportation Science Division, Oak Ridge National Laboratory, 2350 Cherahala Boulevard, Knoxville, TN, 37932, USA
| | - Kai Li
- Chemical Sciences Division, Oak Ridge National Laboratory, 1 Bethel Valley Road, Oak Ridge, TN, 37831, USA
| | - Ji Qian
- Department of Mechanical Engineering, University of Maryland, College Park, MD, 20742, USA
| | - Lu Wang
- Advanced Structures and Composites Center, University of Maine, 35 Flagstaff Road, Orono, ME, 04469, USA
- School of Forest Resources, University of Maine, 5755 Nutting Hall, Orono, ME, 04469, USA
| | - Nathalie Lavoine
- Department of Forest Biomaterials, College of Natural Resources, North Carolina State University, Raleigh, NC, 27695, USA
| | - Reagan Newman
- Department of Biomedical Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA
| | - Douglas J Gardner
- Advanced Structures and Composites Center, University of Maine, 35 Flagstaff Road, Orono, ME, 04469, USA
- School of Forest Resources, University of Maine, 5755 Nutting Hall, Orono, ME, 04469, USA
| | - Teng Li
- Department of Mechanical Engineering, University of Maryland, College Park, MD, 20742, USA
| | - Liangbing Hu
- Department of Materials Science and Engineering, University of Maryland, College Park, MD, 20742, USA
| | - Arthur J Ragauskas
- Center for BioEnergy Innovation (CBI), Oak Ridge National Laboratory, Oak Ridge, TN, 37831, USA
- Joint Institute for Biological Sciences, Biosciences Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831, USA
- Department of Chemical and Biomolecular Engineering, University of Tennessee, Knoxville, TN, 37996, USA
- Department of Forestry, Wildlife and Fisheries, Center for Renewable Carbon, The University of Tennessee Institute of Agriculture, Knoxville, TN, 37996, USA
- Department of Mechanical, Aerospace, and Biomedical Engineering, University of Tennessee, Estabrook Road, Knoxville, TN, 37916, USA
| | - Halil Tekinalp
- Manufacturing Demonstration Facility, Energy and Transportation Science Division, Oak Ridge National Laboratory, 2350 Cherahala Boulevard, Knoxville, TN, 37932, USA
| | - Vlastimil Kunc
- Manufacturing Demonstration Facility, Energy and Transportation Science Division, Oak Ridge National Laboratory, 2350 Cherahala Boulevard, Knoxville, TN, 37932, USA
| | - Soydan Ozcan
- Manufacturing Demonstration Facility, Energy and Transportation Science Division, Oak Ridge National Laboratory, 2350 Cherahala Boulevard, Knoxville, TN, 37932, USA
| |
Collapse
|
14
|
Zhang J, Furushima H, Nakato T, Mouri E. Preparation of Cellulose Nanocrystal Based Core-Shell Particles with Tunable Component Location. CHEM LETT 2021. [DOI: 10.1246/cl.200702] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Affiliation(s)
- Jie Zhang
- Department of Applied Chemistry, Kyushu Institute of Technology, 1-1 Sensui-cho, Tobata, Kitakyushu, Fukuoka 804-8550, Japan
| | - Hinako Furushima
- Department of Applied Chemistry, Kyushu Institute of Technology, 1-1 Sensui-cho, Tobata, Kitakyushu, Fukuoka 804-8550, Japan
| | - Teruyuki Nakato
- Department of Applied Chemistry, Kyushu Institute of Technology, 1-1 Sensui-cho, Tobata, Kitakyushu, Fukuoka 804-8550, Japan
- Strategic Research Unit for Innovative Multiscale Materials, Kyushu Institute of Technology, 1-1 Sensui-cho, Tobata, Kitakyushu, Fukuoka 804-8550, Japan
| | - Emiko Mouri
- Department of Applied Chemistry, Kyushu Institute of Technology, 1-1 Sensui-cho, Tobata, Kitakyushu, Fukuoka 804-8550, Japan
- Strategic Research Unit for Innovative Multiscale Materials, Kyushu Institute of Technology, 1-1 Sensui-cho, Tobata, Kitakyushu, Fukuoka 804-8550, Japan
| |
Collapse
|
15
|
Abstract
Nanocellulose (NC) is a biomaterial with growing interest in the field of nanocomposites and sustainable materials. NC has various applications including biodegradable materials, reinforcing agents, packaging films, transpiring membranes and medical devices. Among the many applications, the use of NC functionalized with organic and inorganic groups has found wide use as a catalyst in chemical transformations. The goal of this review is to collect the current knowledge on its catalytic applications for chemical groups conversion. We have chosen to organize the manuscript according to subdivision of NC into Bacterial Nanocellulose (BNC), Cellulose Nanocrystals (CNCs), and Cellulose Nanofibers (CNFs) and their role as inorganic- and organic-functionalized NC-catalysts in organic synthesis. However, in consideration of the fact that the literature on this field is very extensive, we have decided to focus our attention on the scientific productions of the last five years.
Collapse
|
16
|
Wang L, Urbas AM, Li Q. Nature-Inspired Emerging Chiral Liquid Crystal Nanostructures: From Molecular Self-Assembly to DNA Mesophase and Nanocolloids. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1801335. [PMID: 30160812 DOI: 10.1002/adma.201801335] [Citation(s) in RCA: 160] [Impact Index Per Article: 40.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/27/2018] [Revised: 05/17/2018] [Indexed: 05/22/2023]
Abstract
Liquid crystals (LCs) are omnipresent in living matter, whose chirality is an elegant and distinct feature in certain plant tissues, the cuticles of crabs, beetles, arthropods, and beyond. Taking inspiration from nature, researchers have recently devoted extensive efforts toward developing chiral liquid crystalline materials with self-organized nanostructures and exploring their potential applications in diverse fields ranging from dynamic photonics to energy and safety issues. In this review, an account on the state of the art of emerging chiral liquid crystalline nanostructured materials and their technological applications is provided. First, an overview on the significance of chiral liquid crystalline architectures in various living systems is given. Then, the recent significant progress in different chiral liquid crystalline systems including thermotropic LCs (cholesteric LCs, cubic blue phases, achiral bent-core LCs, etc.) and lyotropic LCs (DNA LCs, nanocellulose LCs, and graphene oxide LCs) is showcased. The review concludes with a perspective on the future scope, opportunities, and challenges in these truly advanced functional soft materials and their promising applications.
Collapse
Affiliation(s)
- Ling Wang
- Liquid Crystal Institute and Chemical Physics Interdisciplinary Program, Kent State University, Kent, OH, 44242, USA
| | - Augustine M Urbas
- Materials and Manufacturing Directorate, Air Force Research Laboratory, Wright-Patterson AFB, OH, 45433, USA
| | - Quan Li
- Liquid Crystal Institute and Chemical Physics Interdisciplinary Program, Kent State University, Kent, OH, 44242, USA
| |
Collapse
|
17
|
Qu D, Zussman E. Electro-responsive Liquid Crystalline Nanocelluloses with Reversible Switching. J Phys Chem Lett 2020; 11:6697-6703. [PMID: 32787220 DOI: 10.1021/acs.jpclett.0c01924] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Liquid crystalline cellulose nanocrystals (CNCs) which can change their structural and optical properties in an electric field could be a new choice for advanced optoelectronic devices. Unfortunately, the exploration of its performance in an electric field is underdeveloped. Hence, we reveal some interesting dielectric coupling activities of liquid crystalline CNC in an electric field. The CNC tactoid is shown to orient its helix axis normal to the electric field direction. Then, as a function of the electric field strength and frequency, the tactoid can be stretched along with a pitch increase, with a deformation mechanism significantly differing at varied frequencies, and finally untwists the helix axis to form a nematic structure upon increasing the electric field strength. Moreover, a straightforward method to visualize the electric field is demonstrated, by combining the CNC uniform lying helix textures with polarized optical microscopy. We envision these understandings could facilitate the development of liquid crystalline CNC in the design of electro-optical devices.
Collapse
Affiliation(s)
- Dan Qu
- Faculty of Mechanical Engineering, Technion-Israel Institute of Technology, Haifa 3200003, Israel
| | - Eyal Zussman
- Faculty of Mechanical Engineering, Technion-Israel Institute of Technology, Haifa 3200003, Israel
| |
Collapse
|
18
|
Liu Y, Wu P. Chirally Reversed Graphene Oxide Liquid Crystals. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2020; 7:2001269. [PMID: 32832370 PMCID: PMC7435251 DOI: 10.1002/advs.202001269] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/06/2020] [Revised: 04/26/2020] [Indexed: 05/23/2023]
Abstract
Colloidal liquid crystals (LCs) formed by nanoparticles hold great promise for creating new structures and topologies. However, achieving highly ordered hierarchical architectures and stable topological configurations is extremely challenging, mainly due to the liquid-like fluidity of colloidal LCs in nature. Herein, an innovative synchronous nanofluidic rectification (SNR) technique for generating ultralong graphene oxide (GO) liquid crystal (GOLC) fibers with hierarchical core-skin architectures is presented, in which the GO sheet assemblies and hydrogel skin formation are synchronous. The SNR technique conceptually follows two design principles: horizontal polymer-flow promotes the rapid planar alignment of GO sheets and drives the chiral-reversing of cholesteric GOLCs, and in situ formed hydrogel skin affords some protection against environmental impact to maintain stable topological configurations. Importantly, the dried fibers retain the smooth surface and ordered internal structures, achieving high mechanical strength and flexibility. The linear and circular polarization potential of GOLC fibers are demonstrated for optical sensing and recognition. This work may open an avenue toward the scalable manufacture of uniform and robust, yet highly anisotropic, fiber-shaped functional materials with complex internal architectures.
Collapse
Affiliation(s)
- Yanjun Liu
- State Key Laboratory of Macromolecular Engineering of PolymersDepartment of Macromolecular ScienceFudan UniversityShanghai200433China
| | - Peiyi Wu
- State Key Laboratory of Macromolecular Engineering of PolymersDepartment of Macromolecular ScienceFudan UniversityShanghai200433China
- State Key Laboratory for Modification of Chemical Fibers and Polymer MaterialsCollege of Chemistry, Chemical Engineering and Biotechnology & Center for Advanced Low‐dimension MaterialsDonghua University2999 North Renmin RoadShanghai201620China
| |
Collapse
|
19
|
Cao Y, Wang PX, D'Acierno F, Hamad WY, Michal CA, MacLachlan MJ. Tunable Diffraction Gratings from Biosourced Lyotropic Liquid Crystals. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1907376. [PMID: 32243008 DOI: 10.1002/adma.201907376] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/10/2019] [Revised: 02/12/2020] [Accepted: 03/08/2020] [Indexed: 06/11/2023]
Abstract
Diffraction gratings are important for modern optical components, such as optical multiplexers and signal processors. Although liquid crystal (LC) gratings based on thermotropic LCs have been extensively explored, they often require expensive molecules and complicated manufacturing processes. Lyotropic LCs, which can be broadly obtained from both synthetic and natural sources, have not yet been applied in optical gratings. Herein, a facile grating fabrication method using a biosourced lyotropic LC formed by cellulose nanocrystals (CNCs), a material extracted from plants, is reported. Hydrogel sheets with vertically aligned uniform periodic structures are obtained by fixing the highly oriented chiral nematic LC of CNCs in polymer networks under the cooperative effects of gravity on phase separation and a magnetic field on LC orientation. The hydrogel generates up to sixth-order diffraction spots and shows linear polarization selectivity, with tunable grating periodicity controlled through LC concentration regulation. This synthesis strategy can be broadly applied to various grating materials and opens up a new area of optical materials from lyotropic LCs.
Collapse
Affiliation(s)
- Yuanyuan Cao
- Stewart Blusson Quantum Matter Institute, University of British Columbia, 2355 East Mall, British Columbia, Vancouver, V6T 1Z4, Canada
- Department of Chemistry, University of British Columbia, 2036 Main Mall, British Columbia, Vancouver, V6T 1Z1, Canada
| | - Pei-Xi Wang
- Department of Chemistry, University of British Columbia, 2036 Main Mall, British Columbia, Vancouver, V6T 1Z1, Canada
| | - Francesco D'Acierno
- Department of Chemistry, University of British Columbia, 2036 Main Mall, British Columbia, Vancouver, V6T 1Z1, Canada
- Department of Physics and Astronomy, University of British Columbia, 6224 Agricultural Road, British Columbia, Vancouver, V6T 1Z1, Canada
| | - Wadood Y Hamad
- Transformation and Interfaces Group, Bioproducts Innovation Centre of Excellence, FPInnovations, 2665 East Mall, British Columbia, Vancouver, V6T 1Z4, Canada
| | - Carl A Michal
- Department of Chemistry, University of British Columbia, 2036 Main Mall, British Columbia, Vancouver, V6T 1Z1, Canada
- Department of Physics and Astronomy, University of British Columbia, 6224 Agricultural Road, British Columbia, Vancouver, V6T 1Z1, Canada
| | - Mark J MacLachlan
- Stewart Blusson Quantum Matter Institute, University of British Columbia, 2355 East Mall, British Columbia, Vancouver, V6T 1Z4, Canada
- Department of Chemistry, University of British Columbia, 2036 Main Mall, British Columbia, Vancouver, V6T 1Z1, Canada
- WPI Nano Life Science Institute, Kanazawa University, Kanazawa, 920-1192, Japan
| |
Collapse
|
20
|
Liu H, Zhang F, Dai J, Chen LI, Yan Y. Optical Recognition of Sulfamethoxazole by a Colored Chiral Nematic Imprinted Film. ANAL SCI 2020; 36:221-225. [PMID: 31548439 DOI: 10.2116/analsci.19p310] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
In this article, an alterable structural color in the reflected light of a chiral nematic imprinted film was fabricated. Bio-template nanocrystalline celluloses were applied as structural oriented templates. Selectivity of the sensor was endowed by the molecular imprinting process which applied sulfamethoxazoles (SMXs) as template molecules, urea and phenol as double functional monomers, and formaldehyde as cross-linkers. The sensor exhibited a chiral nematic blue mesoporous structure, which could selectively recognize SMXs on account of the abundant predetermined rebinding sites. Once SMXs were detected, the sensor showed a visible color variance from blue to yellow and the sensitive concentration range was from 3.9 × 10-3 to 3.9 mmol L-1. Both quantitative analyses, selective testing and recycling performance of the sensor were demonstrated. This optical response to SMXs can provide a portable, low-cost and easy-to-use strategy for the convenient detection of SMXs.
Collapse
Affiliation(s)
- Hongbo Liu
- Institute of Green Chemistry and Chemical Technology, School of Chemistry and Chemical Engineering, Jiangsu University
| | - Fusheng Zhang
- Institute of Green Chemistry and Chemical Technology, School of Chemistry and Chemical Engineering, Jiangsu University
| | - Jiangdong Dai
- Institute of Green Chemistry and Chemical Technology, School of Chemistry and Chemical Engineering, Jiangsu University
| | - L I Chen
- Institute of Green Chemistry and Chemical Technology, School of Chemistry and Chemical Engineering, Jiangsu University
| | - Yongsheng Yan
- Institute of Green Chemistry and Chemical Technology, School of Chemistry and Chemical Engineering, Jiangsu University
| |
Collapse
|
21
|
Six-fold director field configuration in amyloid nematic and cholesteric phases. Sci Rep 2019; 9:12654. [PMID: 31477753 PMCID: PMC6718687 DOI: 10.1038/s41598-019-48996-3] [Citation(s) in RCA: 17] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/28/2019] [Accepted: 08/16/2019] [Indexed: 12/23/2022] Open
Abstract
Chiral liquid crystals, or cholesteric phases, have been widely studied in the last decades, leading to fundamental advances and a multitude of applications and technologies. In general, the rich phenomenology of these systems depends directly on the molecular traits and conditions of the system, imposing precise symmetry to the resulting nematic field. By selecting amyloid fibrils as model filamentous chiral colloids, we report an unprecedented breadth of liquid crystalline morphologies, where up to six distinct configurations of the nematic field are observed under identical conditions. Amyloid-rich droplets show homogeneous, bipolar, radial, uniaxial chiral and radial chiral nematic fields, with additional parabolic focal conics in bulk. Variational and scaling theories allow rationalizing the experimental evidence as a subtle interplay between surface and bulk energies. Our experimental and theoretical findings deepen the understanding of chiral liquid crystals under confinement, opening to a more comprehensive exploitation of these systems in related functional materials.
Collapse
|
22
|
Yang Q, Jiang Y, Fan D, Zheng K, Zhang J, Xu Z, Yao W, Zhang Q, Song Y, Zheng Q, Fan L, Gao W, Gao C. Nonsphere Drop Impact Assembly of Graphene Oxide Liquid Crystals. ACS NANO 2019; 13:8382-8391. [PMID: 31291085 DOI: 10.1021/acsnano.9b03926] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
Creating long-lived topological textured liquid crystals (LCs) in confined nonspherical space is of significance in both generations of structures and fundamental studies of topological physics. However, it remains a great challenge due to the fluid character of LCs and the unstable tensional state of transient nonspheres. Here, we realize a rich series of topological textures confined in nonspherical geometries by drop impact assembly (DIA) of graphene oxide (GO) aqueous LCs. Various highly curved nonspherical morphologies of LCs were captured by gelator bath, generating distinct out-of-equilibrium yet long-lived macroscopic topological textures in 3D confinement. Our hydrodynamic investigations on DIA processes reveal that the shear-thinning fluid behavior of LCs and the arrested GO alignments mainly contribute to the topological richness in DIA. Utilizing the shaping behavior of GO LCs compared to other conventional linear polymers such as alginate, we further extend the DIA methodology to design more complex yet highly controllable functional composites and hybrids. This work thus reveals the potential to scale production of uniform yet anisotropic materials with rich topologic textures and tailored composition.
Collapse
Affiliation(s)
- Qiuyan Yang
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Key Laboratory of Adsorption and Separation Materials & Technologies of Zhejiang Province , Zhejiang University , 38 Zheda Road , Hangzhou 310027 , People's Republic of China
| | - Yanqiu Jiang
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Key Laboratory of Adsorption and Separation Materials & Technologies of Zhejiang Province , Zhejiang University , 38 Zheda Road , Hangzhou 310027 , People's Republic of China
| | - Dongyu Fan
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Key Laboratory of Adsorption and Separation Materials & Technologies of Zhejiang Province , Zhejiang University , 38 Zheda Road , Hangzhou 310027 , People's Republic of China
| | - Kan Zheng
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Key Laboratory of Adsorption and Separation Materials & Technologies of Zhejiang Province , Zhejiang University , 38 Zheda Road , Hangzhou 310027 , People's Republic of China
| | - Jiayi Zhang
- State Key Laboratory of Clean Energy Utilization , Zhejiang University , 38 Zheda Road , Hangzhou 310027 , People's Republic of China
| | - Zhen Xu
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Key Laboratory of Adsorption and Separation Materials & Technologies of Zhejiang Province , Zhejiang University , 38 Zheda Road , Hangzhou 310027 , People's Republic of China
| | - Weiquan Yao
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Key Laboratory of Adsorption and Separation Materials & Technologies of Zhejiang Province , Zhejiang University , 38 Zheda Road , Hangzhou 310027 , People's Republic of China
| | - Qingxu Zhang
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Key Laboratory of Adsorption and Separation Materials & Technologies of Zhejiang Province , Zhejiang University , 38 Zheda Road , Hangzhou 310027 , People's Republic of China
| | - Yihu Song
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Key Laboratory of Adsorption and Separation Materials & Technologies of Zhejiang Province , Zhejiang University , 38 Zheda Road , Hangzhou 310027 , People's Republic of China
| | - Qiang Zheng
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Key Laboratory of Adsorption and Separation Materials & Technologies of Zhejiang Province , Zhejiang University , 38 Zheda Road , Hangzhou 310027 , People's Republic of China
| | - Liwu Fan
- State Key Laboratory of Clean Energy Utilization , Zhejiang University , 38 Zheda Road , Hangzhou 310027 , People's Republic of China
| | - Weiwei Gao
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Key Laboratory of Adsorption and Separation Materials & Technologies of Zhejiang Province , Zhejiang University , 38 Zheda Road , Hangzhou 310027 , People's Republic of China
| | - Chao Gao
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Key Laboratory of Adsorption and Separation Materials & Technologies of Zhejiang Province , Zhejiang University , 38 Zheda Road , Hangzhou 310027 , People's Republic of China
| |
Collapse
|
23
|
Li Y, Khuu N, Prince E, Alizadehgiashi M, Galati E, Lavrentovich OD, Kumacheva E. Nanoparticle-laden droplets of liquid crystals: Interactive morphogenesis and dynamic assembly. SCIENCE ADVANCES 2019; 5:eaav1035. [PMID: 31281879 PMCID: PMC6611685 DOI: 10.1126/sciadv.aav1035] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/14/2018] [Accepted: 05/29/2019] [Indexed: 05/20/2023]
Abstract
Defects in liquid crystals serve as templates for nanoparticle (NP) organization; however, NP assembly in cholesteric (Ch) liquid crystals is only beginning to emerge. We show interactive morphogenesis of NP assemblies and a Ch liquid crystalline host formed by cellulose nanocrystals (CNCs), in which both the host and the guest experience marked changes in shape and structure as a function of concentration. At low NP loading, Ch-CNC droplets exhibit flat-ellipsoidal packing of Ch pseudolayers, while the NPs form a toroidal ring- or two cone-shaped assemblies at droplet poles. Increase in NP loading triggers reversible droplet transformation to gain a core-shell morphology with an isotropic core and a Ch shell, with NPs partitioning in the core and in disclinations. We show programmable assembly of droplets carrying magnetic NPs. This work offers a strategy for NP organization in Ch liquid crystals, thus broadening the spectrum of architectures of soft nanostructured materials.
Collapse
Affiliation(s)
- Yunfeng Li
- State Key Laboratory of Supramolecular Structure and Materials, College of Chemistry, Jilin University, Changchun 130012, China
- Department of Chemistry, University of Toronto, 80 Saint George Street, Toronto, Ontario M5S 3H6, Canada
- Corresponding author. (E.K.); (O.D.L.); (Y.L.)
| | - Nancy Khuu
- Department of Chemistry, University of Toronto, 80 Saint George Street, Toronto, Ontario M5S 3H6, Canada
| | - Elisabeth Prince
- Department of Chemistry, University of Toronto, 80 Saint George Street, Toronto, Ontario M5S 3H6, Canada
| | - Moien Alizadehgiashi
- Department of Chemistry, University of Toronto, 80 Saint George Street, Toronto, Ontario M5S 3H6, Canada
| | - Elizabeth Galati
- Department of Chemistry, University of Toronto, 80 Saint George Street, Toronto, Ontario M5S 3H6, Canada
| | - Oleg D. Lavrentovich
- Advanced Materials and Liquid Crystal Institute, Department of Physics, and Chemical Physics Interdisciplinary Program, Kent State University, Kent, OH 44242, USA
- Corresponding author. (E.K.); (O.D.L.); (Y.L.)
| | - Eugenia Kumacheva
- Department of Chemistry, University of Toronto, 80 Saint George Street, Toronto, Ontario M5S 3H6, Canada
- Department of Chemical Engineering and Applied Chemistry, University of Toronto, 200 College Street, Toronto, Ontario M5S 3E5, Canada
- Institute of Biomaterials and Biomedical Engineering, University of Toronto, 4 Taddle Creek Road, Toronto, Ontario M5S 3G9, Canada
- Corresponding author. (E.K.); (O.D.L.); (Y.L.)
| |
Collapse
|
24
|
Miyagi K, Teramoto Y. Function extension of dual-mechanochromism of acylated hydroxypropyl cellulose/synthetic polymer composites achieved by “moderate” compatibility as well as hydrogen bonding. POLYMER 2019. [DOI: 10.1016/j.polymer.2019.04.067] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
25
|
Yu Y, Gim S, Kim D, Arnon ZA, Gazit E, Seeberger PH, Delbianco M. Oligosaccharides Self-Assemble and Show Intrinsic Optical Properties. J Am Chem Soc 2019; 141:4833-4838. [PMID: 30829477 PMCID: PMC6727349 DOI: 10.1021/jacs.8b11882] [Citation(s) in RCA: 40] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/03/2023]
Abstract
Self-assembling peptides and oligonucleotides have given rise to synthetic materials with several applications in nanotechnology. Aggregation of synthetic oligosaccharides into well-defined architectures has not been reported even though natural polysaccharides, such as cellulose and chitin, are key structural components of biomaterials. Here, we report that six synthetic oligosaccharides, ranging from dimers to hexamers, self-assemble into nanostructures of varying morphologies and emit within the visible spectrum in an excitation-dependent manner. Well-defined differences in chain length, monomer modification, and aggregation methods yield glycomaterials with distinct shapes and properties. The excitation-dependent fluorescence in a broad range within the visible spectrum illustrates their potential for use in optical devices and imaging applications. We anticipate that our systematic approach of studying well-defined synthetic oligosaccharides will form the foundation of our understanding of carbohydrate interactions in nature.
Collapse
Affiliation(s)
- Yang Yu
- Department of Biomolecular Systems , Max Planck Institute of Colloids and Interfaces , Am Mühlenberg 1 , 14476 Potsdam , Germany.,Department of Chemistry and Biochemistry , Freie Universität Berlin , Arnimallee 22 , 14195 Berlin , Germany
| | - Soeun Gim
- Department of Biomolecular Systems , Max Planck Institute of Colloids and Interfaces , Am Mühlenberg 1 , 14476 Potsdam , Germany.,Department of Chemistry and Biochemistry , Freie Universität Berlin , Arnimallee 22 , 14195 Berlin , Germany
| | - Dongyoon Kim
- Department of Biomolecular Systems , Max Planck Institute of Colloids and Interfaces , Am Mühlenberg 1 , 14476 Potsdam , Germany
| | - Zohar A Arnon
- Department of Molecular Microbiology and Biotechnology, George S. Wise Faculty of Life Sciences , Tel Aviv University , Tel Aviv 6997801 , Israel
| | - Ehud Gazit
- Department of Molecular Microbiology and Biotechnology, George S. Wise Faculty of Life Sciences , Tel Aviv University , Tel Aviv 6997801 , Israel.,Department of Materials Science and Engineering Iby and Aladar Fleischman Faculty of Engineering , Tel Aviv University , Tel Aviv 6997801 , Israel
| | - Peter H Seeberger
- Department of Biomolecular Systems , Max Planck Institute of Colloids and Interfaces , Am Mühlenberg 1 , 14476 Potsdam , Germany.,Department of Chemistry and Biochemistry , Freie Universität Berlin , Arnimallee 22 , 14195 Berlin , Germany
| | - Martina Delbianco
- Department of Biomolecular Systems , Max Planck Institute of Colloids and Interfaces , Am Mühlenberg 1 , 14476 Potsdam , Germany
| |
Collapse
|
26
|
Liquid Crystalline Tactoidal Microphases in Ferrofluids: Spatial Positioning and Orientation by Magnetic Field Gradients. Chem 2019. [DOI: 10.1016/j.chempr.2018.12.010] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
|
27
|
Ohashi R, Michal CA, Hamad WY, Nguyen TD, Mizuno M, MacLachlan MJ. Solid-state 23Na NMR spectroscopy studies of ordered and disordered cellulose nanocrystal films. SOLID STATE NUCLEAR MAGNETIC RESONANCE 2019; 97:31-39. [PMID: 30597399 DOI: 10.1016/j.ssnmr.2018.12.001] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/18/2018] [Revised: 12/12/2018] [Accepted: 12/12/2018] [Indexed: 06/09/2023]
Abstract
Cellulose nanocrystal films with either disordered or chiral nematic structures of varying helical pitch were investigated using 23Na solid-state nuclear magnetic resonance (NMR) spectroscopy. Spin lattice relaxation of 1H correlated with 23Na analyzed by indirect observation using polarization transfer from 1H nuclei to 23Na nuclei showed that the Na+ cations are well hydrated in the cellulose nanocrystal films. Linewidth analysis in solid-state 23Na NMR showed that the Na+ cations move in confined spaces, and that the Na+ cations in the film having disordered structure are more dynamic than in the films having ordered structure. From lineshape analysis of the 23Na 2D nutation NMR spectra, we can distinguish the Na+ environments within the ordered and disordered films, and find trends in anisotropic interaction parameters between ordered samples with different pitches. These are the first detailed 23Na NMR spectroscopic studies of CNC-Na+ films, and they show that this technique may be a powerful probe for characterizing the extent of order in nanocellulose samples.
Collapse
Affiliation(s)
- Ryutaro Ohashi
- Department of Chemistry, Graduate School of Natural Science & Technology, Kanazawa University, Kakuma-machi, Kanazawa, 920-1192, Japan; Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC V6T 1Z1, Canada.
| | - Carl A Michal
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC V6T 1Z1, Canada; Department of Physics and Astronomy, University of British Columbia, 6224 Agricultural Road, Vancouver, BC V6T 1Z1, Canada
| | - Wadood Y Hamad
- FPInnovations, 2665 East Mall, Vancouver, BC V6T 1Z4, Canada
| | - Thanh-Dinh Nguyen
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC V6T 1Z1, Canada
| | - Motohiro Mizuno
- Department of Chemistry, Graduate School of Natural Science & Technology, Kanazawa University, Kakuma-machi, Kanazawa, 920-1192, Japan
| | - Mark J MacLachlan
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC V6T 1Z1, Canada
| |
Collapse
|
28
|
O'Keeffe O, Wang PX, Hamad WY, MacLachlan MJ. Boundary Geometry Effects on the Coalescence of Liquid Crystalline Tactoids and Formation of Topological Defects. J Phys Chem Lett 2019; 10:278-282. [PMID: 30615453 DOI: 10.1021/acs.jpclett.8b03733] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/20/2023]
Abstract
In many lyotropic liquid crystals, the evolution of macroscopic anisotropic phases is mediated by tactoids, which are discrete ordered microdroplets existing in continuous disordered phases. Here we report the effects of boundary conditions on the movement and transformation of liquid crystalline tactoids of cellulose nanocrystals (CNCs) in nonspherical droplets. Using an in situ photopolymerization method, we obtained three-dimensional views of the initial emergence and expansion of macroscopic ordered phases. These processes, as well as the evolution of topological defects, were significantly influenced by the boundary geometry (or Marangoni flows and pinning effects) of the droplets. This phenomenon helps explain the influence of the substrate on the photonic properties of chiral nematic films of CNCs and may also provide new insights into the self-assembly process in lyotropic liquid crystals.
Collapse
Affiliation(s)
- Orla O'Keeffe
- Department of Chemistry , University of British Columbia , 2036 Main Mall , Vancouver , British Columbia , Canada V6T 1Z1
| | - Pei-Xi Wang
- Department of Chemistry , University of British Columbia , 2036 Main Mall , Vancouver , British Columbia , Canada V6T 1Z1
| | - Wadood Y Hamad
- FPInnovations , 2665 East Mall , Vancouver , British Columbia , Canada V6T 1Z4
| | - Mark J MacLachlan
- Department of Chemistry , University of British Columbia , 2036 Main Mall , Vancouver , British Columbia , Canada V6T 1Z1
| |
Collapse
|
29
|
Wang Y, Guo J, Zhou L, Ye C, Omenetto FG, Kaplan DL, Ling S. Design, Fabrication, and Function of Silk-Based Nanomaterials. ADVANCED FUNCTIONAL MATERIALS 2018; 28:1805305. [PMID: 32440262 PMCID: PMC7241600 DOI: 10.1002/adfm.201805305] [Citation(s) in RCA: 44] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/01/2018] [Indexed: 05/03/2023]
Abstract
Animal silks are built from pure protein components and their mechanical performance, such as strength and toughness, often exceed most engineered materials. The secret to this success is their unique nanoarchitectures that are formed through the hierarchical self-assembly of silk proteins. This natural material fabrication process in sharp contrast to the production of artificial silk materials, which usually are directly constructed as bulk structures from silk fibroin (SF) molecular. In recent years, with the aim of understanding and building better silk materials, a variety of fabrication strategies have been designed to control nanostructures of silks or to create functional materials from silk nanoscale building blocks. These emerging fabrication strategies offer an opportunity to tailor the structure of SF at the nanoscale and provide a promising route to produce structurally and functionally optimized silk nanomaterials. Here, we review the critical roles of silk nanoarchitectures on property and function of natural silk fibers, outline the strategies of utilization of these silk nanobuilding blocks, and we provide a critical summary of state of the art in the field to create silk nanoarchitectures and to generate silk-based nanocomponents. Further, such insights suggest templates to consider for other materials systems.
Collapse
Affiliation(s)
- Yu Wang
- Department of Biomedical Engineering, Tufts University, MA 02155, USA
| | - Jin Guo
- Department of Biomedical Engineering, Tufts University, MA 02155, USA; Department of Chemical and Biological Engineering, Tufts University, MA 02155, USA
| | - Liang Zhou
- Department of Material Science and Engineering, AnHui Agricultural University, Hefei 230036, China
| | - Chao Ye
- School of Physical Science and Technology, ShanghaiTech University, Shanghai 201210, China
| | | | - David L Kaplan
- Department of Biomedical Engineering, Tufts University, MA 02155, USA
| | - Shengjie Ling
- School of Physical Science and Technology, ShanghaiTech University, Shanghai 201210, China
| |
Collapse
|
30
|
Chakrabarty A, Miyagi K, Maiti M, Teramoto Y. Topological Transition in Spontaneously Formed Cellulosic Liquid-Crystalline Microspheres in a w/o Emulsion. Biomacromolecules 2018; 19:4650-4657. [DOI: 10.1021/acs.biomac.8b01367] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
31
|
Thomas B, Raj MC, B AK, H RM, Joy J, Moores A, Drisko GL, Sanchez C. Nanocellulose, a Versatile Green Platform: From Biosources to Materials and Their Applications. Chem Rev 2018; 118:11575-11625. [PMID: 30403346 DOI: 10.1021/acs.chemrev.7b00627] [Citation(s) in RCA: 564] [Impact Index Per Article: 94.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/18/2023]
Abstract
With increasing environmental and ecological concerns due to the use of petroleum-based chemicals and products, the synthesis of fine chemicals and functional materials from natural resources is of great public value. Nanocellulose may prove to be one of the most promising green materials of modern times due to its intrinsic properties, renewability, and abundance. In this review, we present nanocellulose-based materials from sourcing, synthesis, and surface modification of nanocellulose, to materials formation and applications. Nanocellulose can be sourced from biomass, plants, or bacteria, relying on fairly simple, scalable, and efficient isolation techniques. Mechanical, chemical, and enzymatic treatments, or a combination of these, can be used to extract nanocellulose from natural sources. The properties of nanocellulose are dependent on the source, the isolation technique, and potential subsequent surface transformations. Nanocellulose surface modification techniques are typically used to introduce either charged or hydrophobic moieties, and include amidation, esterification, etherification, silylation, polymerization, urethanization, sulfonation, and phosphorylation. Nanocellulose has excellent strength, high Young's modulus, biocompatibility, and tunable self-assembly, thixotropic, and photonic properties, which are essential for the applications of this material. Nanocellulose participates in the fabrication of a large range of nanomaterials and nanocomposites, including those based on polymers, metals, metal oxides, and carbon. In particular, nanocellulose complements organic-based materials, where it imparts its mechanical properties to the composite. Nanocellulose is a promising material whenever material strength, flexibility, and/or specific nanostructuration are required. Applications include functional paper, optoelectronics, and antibacterial coatings, packaging, mechanically reinforced polymer composites, tissue scaffolds, drug delivery, biosensors, energy storage, catalysis, environmental remediation, and electrochemically controlled separation. Phosphorylated nanocellulose is a particularly interesting material, spanning a surprising set of applications in various dimensions including bone scaffolds, adsorbents, and flame retardants and as a support for the heterogenization of homogeneous catalysts.
Collapse
Affiliation(s)
- Bejoy Thomas
- Department of Chemistry , Newman College, Thodupuzha , 685 585 Thodupuzha , Kerala , India
| | - Midhun C Raj
- Department of Chemistry , Newman College, Thodupuzha , 685 585 Thodupuzha , Kerala , India
| | - Athira K B
- Department of Chemistry , Newman College, Thodupuzha , 685 585 Thodupuzha , Kerala , India
| | - Rubiyah M H
- Department of Chemistry , Newman College, Thodupuzha , 685 585 Thodupuzha , Kerala , India
| | - Jithin Joy
- Department of Chemistry , Newman College, Thodupuzha , 685 585 Thodupuzha , Kerala , India.,International and Interuniversity Centre for Nanoscience and Nanotechnology (IIUCNN), Mahatma Gandhi University , 686 560 Kottayam , Kerala , India
| | - Audrey Moores
- Centre in Green Chemistry and Catalysis, Department of Chemistry , McGill University , 801 Sherbrooke Street West , Montreal , Quebec H3A 0B8 , Canada
| | - Glenna L Drisko
- CNRS, ICMCB, Université de Bordeaux, UMR 5026 , F-33600 Pessac , France
| | - Clément Sanchez
- UPMC Université Paris 06, CNRS, UMR 7574 Laboratoire Chimie de la Matière Condensée de Paris, Collège de France , 11 place, Marcelin Berthelot , F-75005 , Paris , France
| |
Collapse
|
32
|
Liu Y, Agthe M, Salajková M, Gordeyeva K, Guccini V, Fall A, Salazar-Alvarez G, Schütz C, Bergström L. Assembly of cellulose nanocrystals in a levitating drop probed by time-resolved small angle X-ray scattering. NANOSCALE 2018; 10:18113-18118. [PMID: 30238947 DOI: 10.1039/c8nr05598j] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/23/2023]
Abstract
Assembly of bio-based nano-sized particles into complex architectures and morphologies is an area of fundamental interest and technical importance. We have investigated the assembly of sulfonated cellulose nanocrystals (CNC) dispersed in a shrinking levitating aqueous drop using time-resolved small angle X-ray scattering (SAXS). Analysis of the scaling of the particle separation distance (d) with particle concentration (c) was used to follow the transition of CNC dispersions from an isotropic state at 1-2 vol% to a compressed nematic state at particle concentrations above 30 vol%. Comparison with SAXS measurements on CNC dispersions at near equilibrium conditions shows that evaporation-induced assembly of CNC in large levitating drops is comparable to bulk systems. Colloidal states with d vs. c scalings intermediate between isotropic dispersions and unidirectional compression of the nematic structure could be related to the biphasic region and gelation of CNC. Nanoscale structural information of CNC assembly up to very high particle concentrations can help to fabricate nanocellulose-based materials by evaporative methods.
Collapse
Affiliation(s)
- Yingxin Liu
- Department of Materials and Environmental Chemistry, Stockholm University, 106 91 Stockholm, Sweden.
| | | | | | | | | | | | | | | | | |
Collapse
|
33
|
Yu H, Pan K, Deng J. Cellulose Concurrently Induces Predominantly One-Handed Helicity in Helical Polymers and Controls the Shape of Optically Active Particles Thereof. Macromolecules 2018. [DOI: 10.1021/acs.macromol.8b01282] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/30/2022]
|
34
|
Miyagi K, Teramoto Y. Exploration of immobilization conditions of cellulosic lyotropic liquid crystals in monomeric solvents by in situ polymerization and achievement of dual mechanochromism at room temperature. RSC Adv 2018; 8:24724-24730. [PMID: 35542165 PMCID: PMC9082404 DOI: 10.1039/c8ra04878a] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/07/2018] [Accepted: 06/30/2018] [Indexed: 11/21/2022] Open
Abstract
We investigated conditions to prepare cellulosic cholesteric liquid crystalline (ChLC) films in order to accomplish dual mechanochromism, i.e., colour control and circular dichroic inversion upon mechanical stimulus, at room temperature. Flexible propionylated hydroxypropyl cellulose (PHPC) was prepared by a simple reaction and found to be capable of forming lyotropic ChLC in various monomeric solvents. The ChLC solutions were subjected to in situ polymerization to obtain PHPC/synthetic polymer composite films incorporating the ChLC structure. However, the immobilization behaviour depended on the type of original monomers. Differential scanning calorimetry and solid-state NMR measurement revealed that the ChLC structure was more highly fixed when the compatibility between PHPC and the coexisting polymers was lower. Eventually, thus obtained ChLC composite films exhibited dual mechanochromism under ambient temperature.
Collapse
Affiliation(s)
- K Miyagi
- Department of Applied Life Science, Faculty of Applied Biological Sciences, Gifu University Gifu 501-1193 Japan
| | - Y Teramoto
- Department of Applied Life Science, Faculty of Applied Biological Sciences, Gifu University Gifu 501-1193 Japan
- Center for Highly Advanced Integration of Nano and Life Sciences (G-CHAIN), Gifu University Gifu 501-1193 Japan
| |
Collapse
|
35
|
Kontturi E, Laaksonen P, Linder MB, Gröschel AH, Rojas OJ, Ikkala O. Advanced Materials through Assembly of Nanocelluloses. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2018; 30:e1703779. [PMID: 29504161 DOI: 10.1002/adma.201703779] [Citation(s) in RCA: 333] [Impact Index Per Article: 55.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/07/2017] [Revised: 09/06/2017] [Indexed: 05/20/2023]
Abstract
There is an emerging quest for lightweight materials with excellent mechanical properties and economic production, while still being sustainable and functionalizable. They could form the basis of the future bioeconomy for energy and material efficiency. Cellulose has long been recognized as an abundant polymer. Modified celluloses were, in fact, among the first polymers used in technical applications; however, they were later replaced by petroleum-based synthetic polymers. Currently, there is a resurgence of interest to utilize renewable resources, where cellulose is foreseen to make again a major impact, this time in the development of advanced materials. This is because of its availability and properties, as well as economic and sustainable production. Among cellulose-based structures, cellulose nanofibrils and nanocrystals display nanoscale lateral dimensions and lengths ranging from nanometers to micrometers. Their excellent mechanical properties are, in part, due to their crystalline assembly via hydrogen bonds. Owing to their abundant surface hydroxyl groups, they can be easily modified with nanoparticles, (bio)polymers, inorganics, or nanocarbons to form functional fibers, films, bulk matter, and porous aerogels and foams. Here, some of the recent progress in the development of advanced materials within this rapidly growing field is reviewed.
Collapse
Affiliation(s)
- Eero Kontturi
- Department of Bioproducts and Biosystems, Aalto University, Espoo, FI-00076, Finland
| | - Päivi Laaksonen
- Department of Bioproducts and Biosystems, Aalto University, Espoo, FI-00076, Finland
- Center of Excellence Molecular Engineering of Biosynthetic Hybrid Materials Research, Aalto University and VTT, Espoo, FI-00076, Finland
| | - Markus B Linder
- Department of Bioproducts and Biosystems, Aalto University, Espoo, FI-00076, Finland
- Center of Excellence Molecular Engineering of Biosynthetic Hybrid Materials Research, Aalto University and VTT, Espoo, FI-00076, Finland
| | - André H Gröschel
- Physical Chemistry and Centre for Nanointegration (CENIDE), University of Duisburg-Essen, DE-45127, Essen, Germany
| | - Orlando J Rojas
- Department of Bioproducts and Biosystems, Aalto University, Espoo, FI-00076, Finland
- Center of Excellence Molecular Engineering of Biosynthetic Hybrid Materials Research, Aalto University and VTT, Espoo, FI-00076, Finland
- Department of Applied Physics, Aalto University, Espoo, FI-00076, Finland
| | - Olli Ikkala
- Department of Bioproducts and Biosystems, Aalto University, Espoo, FI-00076, Finland
- Center of Excellence Molecular Engineering of Biosynthetic Hybrid Materials Research, Aalto University and VTT, Espoo, FI-00076, Finland
- Department of Applied Physics, Aalto University, Espoo, FI-00076, Finland
| |
Collapse
|
36
|
Parker RM, Guidetti G, Williams CA, Zhao T, Narkevicius A, Vignolini S, Frka-Petesic B. The Self-Assembly of Cellulose Nanocrystals: Hierarchical Design of Visual Appearance. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2018; 30:e1704477. [PMID: 29250832 DOI: 10.1002/adma.201704477] [Citation(s) in RCA: 236] [Impact Index Per Article: 39.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/08/2017] [Revised: 09/18/2017] [Indexed: 05/19/2023]
Abstract
By controlling the interaction of biological building blocks at the nanoscale, natural photonic nanostructures have been optimized to produce intense coloration. Inspired by such biological nanostructures, the possibility to design the visual appearance of a material by guiding the hierarchical self-assembly of its constituent components, ideally using natural materials, is an attractive route for rationally designed, sustainable manufacturing. Within the large variety of biological building blocks, cellulose nanocrystals are one of the most promising biosourced materials, primarily for their abundance, biocompatibility, and ability to readily organize into photonic structures. Here, the mechanisms underlying the formation of iridescent, vividly colored materials from colloidal liquid crystal suspensions of cellulose nanocrystals are reviewed and recent advances in structural control over the hierarchical assembly process are reported as a toolbox for the design of sophisticated optical materials.
Collapse
Affiliation(s)
- Richard M Parker
- Department of Chemistry, University of Cambridge, Lensfield Road, Cambridge, CB2 1EW, UK
| | - Giulia Guidetti
- Department of Chemistry, University of Cambridge, Lensfield Road, Cambridge, CB2 1EW, UK
| | - Cyan A Williams
- Department of Chemistry, University of Cambridge, Lensfield Road, Cambridge, CB2 1EW, UK
| | - Tianheng Zhao
- Department of Chemistry, University of Cambridge, Lensfield Road, Cambridge, CB2 1EW, UK
| | - Aurimas Narkevicius
- Department of Chemistry, University of Cambridge, Lensfield Road, Cambridge, CB2 1EW, UK
| | - Silvia Vignolini
- Department of Chemistry, University of Cambridge, Lensfield Road, Cambridge, CB2 1EW, UK
| | - Bruno Frka-Petesic
- Department of Chemistry, University of Cambridge, Lensfield Road, Cambridge, CB2 1EW, UK
| |
Collapse
|
37
|
Ling S, Kaplan DL, Buehler MJ. Nanofibrils in nature and materials engineering. NATURE REVIEWS. MATERIALS 2018; 3:18016. [PMID: 34168896 PMCID: PMC8221570 DOI: 10.1038/natrevmats.2018.16] [Citation(s) in RCA: 278] [Impact Index Per Article: 46.3] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/15/2023]
Abstract
Nanofibrillar materials, such as cellulose, chitin and silk, are highly ordered architectures, formed through the self-assembly of repetitive building blocks into higher-order structures, which are stabilized by non-covalent interactions. This hierarchical building principle endows many biological materials with remarkable mechanical strength, anisotropy, flexibility and optical properties, such as structural colour. These features make nanofibrillar biopolymers interesting candidates for the development of strong, sustainable and biocompatible materials for environmental, energy, optical and biomedical applications. However, recreating their architecture is challenging from an engineering perspective. Rational design approaches, applying a combination of theoretical and experimental protocols, have enabled the design of biopolymer-based materials through mimicking nature's multiscale assembly approach. In this Review, we summarize hierarchical design strategies of cellulose, silk and chitin, focusing on nanoconfinement, fibrillar orientation and alignment in 2D and 3D structures. These multiscale architectures are discussed in the context of mechanical and optical properties, and different fabrication strategies for the manufacturing of biopolymer nanofibril-based materials are investigated. We highlight the contribution of rational material design strategies to the development of mechanically anisotropic and responsive materials and examine the future of the material-by-design paradigm.
Collapse
Affiliation(s)
- Shengjie Ling
- School of Physical Science and Technology, ShanghaiTech University, Shanghai, China
- Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
- Department of Biomedical Engineering, Tufts University, Medford, MA, USA
| | - David L. Kaplan
- Department of Biomedical Engineering, Tufts University, Medford, MA, USA
- ;
| | - Markus J. Buehler
- Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
- Center for Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
- Center for Computational Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
- ;
| |
Collapse
|
38
|
Wang PX, Hamad WY, MacLachlan MJ. Size-Selective Exclusion Effects of Liquid Crystalline Tactoids on Nanoparticles: A Separation Method. Angew Chem Int Ed Engl 2018. [DOI: 10.1002/ange.201712158] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
Affiliation(s)
- Pei-Xi Wang
- Department of Chemistry; University of British Columbia; 2036 Main Mall Vancouver, British Columbia V6T 1Z1 Canada
| | - Wadood Y. Hamad
- FPInnovations; 2665 East Mall Vancouver British Columbia V6T 1Z4 Canada
| | - Mark J. MacLachlan
- Department of Chemistry; University of British Columbia; 2036 Main Mall Vancouver, British Columbia V6T 1Z1 Canada
| |
Collapse
|
39
|
Wang PX, Hamad WY, MacLachlan MJ. Size-Selective Exclusion Effects of Liquid Crystalline Tactoids on Nanoparticles: A Separation Method. Angew Chem Int Ed Engl 2018; 57:3360-3365. [DOI: 10.1002/anie.201712158] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/27/2017] [Revised: 01/19/2018] [Indexed: 12/29/2022]
Affiliation(s)
- Pei-Xi Wang
- Department of Chemistry; University of British Columbia; 2036 Main Mall Vancouver, British Columbia V6T 1Z1 Canada
| | - Wadood Y. Hamad
- FPInnovations; 2665 East Mall Vancouver British Columbia V6T 1Z4 Canada
| | - Mark J. MacLachlan
- Department of Chemistry; University of British Columbia; 2036 Main Mall Vancouver, British Columbia V6T 1Z1 Canada
| |
Collapse
|
40
|
Wang PX, MacLachlan MJ. Liquid crystalline tactoids: ordered structure, defective coalescence and evolution in confined geometries. PHILOSOPHICAL TRANSACTIONS. SERIES A, MATHEMATICAL, PHYSICAL, AND ENGINEERING SCIENCES 2018; 376:rsta.2017.0042. [PMID: 29277740 PMCID: PMC5746557 DOI: 10.1098/rsta.2017.0042] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Accepted: 08/03/2017] [Indexed: 05/11/2023]
Abstract
Tactoids are liquid crystalline microdroplets that spontaneously nucleate from isotropic dispersions, and transform into macroscopic anisotropic phases. These intermediate structures have been found in a range of molecular, polymeric and colloidal liquid crystals. Typically only studied by polarized optical microscopy, these ordered but easily deformable microdroplets are now emerging as interesting components for structural investigations and developing new materials. In this review, we highlight the structure, property and transformation of tactoids in different compositions, but especially cellulose nanocrystals. We have selected references that illustrate the diversity and most exciting developments in tactoid research, while capturing the historical development of this field.This article is part of a discussion meeting issue 'New horizons for cellulose nanotechnology'.
Collapse
Affiliation(s)
- Pei-Xi Wang
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, British Columbia, Canada V6T 1Z1
| | - Mark J MacLachlan
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, British Columbia, Canada V6T 1Z1
| |
Collapse
|
41
|
Cong H, Yu B, Gao L, Yang B, Gao F, Zhang H, Liu Y. Preparation of morphology-controllable PGMA-DVB microspheres by introducing Span 80 into seed emulsion polymerization. RSC Adv 2018; 8:2593-2598. [PMID: 35541463 PMCID: PMC9077385 DOI: 10.1039/c7ra13158e] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/08/2017] [Accepted: 01/05/2018] [Indexed: 11/21/2022] Open
Abstract
Microporous, hollow, or macroporous polymer spheres were prepared by a seed emulsion polymerisation method. Different from the conventional seeded emulsion polymerization, the sorbitan monooleate (Span 80) was added to the seeded emulsion polymerization. In this study, the monodisperse PS seeds prepared by dispersion polymerization were swelled by dibutyl phthalate (DBP), glycidyl methacrylate (GMA), divinylbenzene (DVB) and Span 80 successively. The effect of the amount of Span 80 on the morphology of microspheres was investigated. As different amount of Span 80 was added to the mixture, the poly(glycidyl methacrylate-divinylbenzene) (PGMA-DVB) microspheres showed a variety of morphologies containing microporous, hollow, and macroporous structure. In addition, uniform hollow particles with different pore size can be obtained through adjusting the amount of Span 80. The obtained PGMA-DVB microspheres showed a variety of morphologies by adjusting the amount of Span 80 in the seeded emulsion polymerization.![]()
Collapse
Affiliation(s)
- Hailin Cong
- Institute of Biomedical Materials and Engineering
- College of Chemistry and Chemical Engineering
- Qingdao University
- Qingdao 266071
- China
| | - Bing Yu
- Institute of Biomedical Materials and Engineering
- College of Chemistry and Chemical Engineering
- Qingdao University
- Qingdao 266071
- China
| | - Lilong Gao
- Institute of Biomedical Materials and Engineering
- College of Chemistry and Chemical Engineering
- Qingdao University
- Qingdao 266071
- China
| | - Bo Yang
- Institute of Biomedical Materials and Engineering
- College of Chemistry and Chemical Engineering
- Qingdao University
- Qingdao 266071
- China
| | - Fei Gao
- Institute of Biomedical Materials and Engineering
- College of Chemistry and Chemical Engineering
- Qingdao University
- Qingdao 266071
- China
| | - Hongbo Zhang
- Institute of Biomedical Materials and Engineering
- College of Chemistry and Chemical Engineering
- Qingdao University
- Qingdao 266071
- China
| | - Yangchun Liu
- Institute of Biomedical Materials and Engineering
- College of Chemistry and Chemical Engineering
- Qingdao University
- Qingdao 266071
- China
| |
Collapse
|
42
|
Tang J, Sisler J, Grishkewich N, Tam KC. Functionalization of cellulose nanocrystals for advanced applications. J Colloid Interface Sci 2017; 494:397-409. [PMID: 28187295 DOI: 10.1016/j.jcis.2017.01.077] [Citation(s) in RCA: 211] [Impact Index Per Article: 30.1] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/22/2016] [Revised: 01/15/2017] [Accepted: 01/22/2017] [Indexed: 12/12/2022]
Abstract
Replacing the widespread use of petroleum-derived non-biodegradable materials with green and sustainable materials is a pressing challenge that is gaining increasing attention by the scientific community. One such system is cellulose nanocrystal (CNC) derived from acid hydrolysis of cellulosic materials, such as plants, tunicates and agriculture biomass. The utilization of colloidal CNCs can aid in the reduction of carbon dioxide that is responsible for global warming and climate change. CNCs are excellent candidates for the design and development of functional nanomaterials in many applications due to several attractive features, such as high surface area, hydroxyl groups for functionalization, colloidal stability, low toxicity, chirality and mechanical strength. Several large scale manufacturing facilities have been commissioned to produce CNCs of up to 1000kg/day, and this has generated increasing interests in both academic and industrial laboratories. In this feature article, we will describe the recent development of functionalized cellulose nanocrystals for several important applications in ours and other laboratories. We will highlight some challenges and offer perspectives on the potentials of these sustainable nanomaterials.
Collapse
Affiliation(s)
- Juntao Tang
- Department of Chemical Engineering, Waterloo Institute for Nanotechnology, University of Waterloo, 200 University Avenue, Waterloo, ON N2L 3G1, Canada
| | - Jared Sisler
- Department of Chemical Engineering, Waterloo Institute for Nanotechnology, University of Waterloo, 200 University Avenue, Waterloo, ON N2L 3G1, Canada
| | - Nathan Grishkewich
- Department of Chemical Engineering, Waterloo Institute for Nanotechnology, University of Waterloo, 200 University Avenue, Waterloo, ON N2L 3G1, Canada
| | - Kam Chiu Tam
- Department of Chemical Engineering, Waterloo Institute for Nanotechnology, University of Waterloo, 200 University Avenue, Waterloo, ON N2L 3G1, Canada.
| |
Collapse
|