Nonmetallic modified zero-valent iron for remediating halogenated organic compounds and heavy metals: A comprehensive review

Zero Valent Iron (ZVI), an ideal reductant treating persistent pollutants, is hampered by issues like corrosion, passivation, and suboptimal utilization. Recent advancements in nonmetallic modified ZVI (NM-ZVI) show promising potential in circumventing these challenges by modifying ZVI's surface and internal physicochemical properties. Despite its promise, a thorough synthesis of research advancements in this domain remains elusive. Here we review the innovative methodologies, regulatory principles, and reduction-centric mechanisms underpinning NM-ZVI's effectiveness against two prevalent persistent pollutants: halogenated organic compounds and heavy metals. We start by evaluating different nonmetallic modification techniques, such as liquid-phase reduction, mechanical ball milling, and pyrolysis, and their respective advantages. The discussion progresses towards a critical analysis of current strategies and mechanisms used for NM-ZVI to enhance its reactivity, electron selectivity, and electron utilization efficiency. This is achieved by optimizing the elemental compositions, content ratios, lattice constants, hydrophobicity, and conductivity. Furthermore, we propose novel approaches for augmenting NM-ZVI's capability to address complex pollution challenges. This review highlights NM-ZVI's potential as an alternative to remediate water environments contaminated with halogenated organic compounds or heavy metals, contributing to the broader discourse on green remediation technologies.

Mechanical-Force-Induced Non-spontaneous Dehalogenative Deuteration of Aromatic Iodides Enabled by Using Piezoelectric Materials as a Redox Catalyst

The development of green and efficient deuteration methods is of great significance for various fields such as organic synthesis, analytical chemistry, and medicinal chemistry. Herein, we have developed a dehalogenative deuteration strategy using piezoelectric materials as catalysts in a solid-phase system under ball-milling conditions. This non-spontaneous reaction is induced by mechanical force. D2O can serve as both a deuterium source and an electron donor in the transformation, eliminating the need for additional stoichiometric exogenous reductants. A series of (hetero)aryl iodides can be transformed into deuterated products with high deuterium incorporation. This method not only effectively overcomes existing synthetic challenges but can also be used for deuterium labelling of drug molecules and derivatives. Bioactivity experiments with deuterated drug molecule suggest that the D-ipriflavone enhances the inhibitory effects on osteoclast differentiation of BMDMs in vitro.

Efficacy of a Zn-based metalorganic framework doped with benznidazole on acute experimental Trypanosoma cruzi infection

Metal-Organic Frameworks (MOFs) have been shown to enhance the activity of encapsulated compounds by facilitating their passage across cell membranes, thereby enabling controlled and selective release. This study investigates the efficacy of BNZ@Zn-MOFs against the acute phase of Trypanosoma cruzi infection in a mouse model. The particles were synthesized by electroelution (EL), doped with BZN via mechanochemistry, and characterized using scanning electron microscopy (SEM), infrared spectroscopy (FTIR), and X-ray diffraction (XRD). BNZ@Zn-MOFs released 80% of the encapsulated BZN within 3 h, demonstrating no cytotoxicity in NIH-3T3 and HeLa cells. Furthermore, in a model of acute experimental T. cruzi-infection in BALB/c mice, the delivery system exhibited antiparasitic activity at a significantly lower BZN concentration compared to free BZN treatment. PCR analysis of treated mice revealed no parasite DNA in their tissues, and hematoxylin-eosin staining showed no apparent damage to tissue architecture. Additionally, serum levels of liver function enzymes remained unchanged, indicating no adverse effects on liver function. This delivery system, utilizing suboptimal BZN doses, enables the preservation of drug activity while potentially facilitating a substantial decrease in side effects associated with Chagas disease treatment.

Mechanochemical Cascade Cyclization of Cyclopropyl Ketones with 1,2-Diamino Arenes for the Direct Synthesis of 1,2-Disubstituted Benzimidazoles†

A mechanochemical synthesis of 1,2-disubstituted benzimidazoles from donor-acceptor cyclopropyl ketones and 1,2-diaminoarenes under metal-free and solventless conditions is reported. The reaction does not require inert conditions and is promoted by a stoichiometric amount of 1,1,1,3,3,3-hexafluoroisopropanol. This cascade reaction involves ring-opening, cyclization, and retro-Mannich reaction of cyclopropyl ketones with aryl 1,2-diamines. Compared to its solution-phase counterpart, this mechanochemical approach shows fast reactivity (24 vs 1.5 h). Mechanistic investigations by electrospray ionization mass spectrometry helped us to propose the reaction mechanism.

Solid-State Self-Assembly: Exclusive Formation and Dynamic Interconversion of Discrete Cyclic Assemblies Based on Molecular Tweezers

In contrast to self-assembly in solution systems, the construction of well-defined assemblies in the solid state has long been identified as a challenging task. Herein, we report the formation of tweezers-shaped molecules into various assemblies through a solid-state self-assembly strategy. The relatively flexible molecular tweezers undergo exclusive and quantitative assembly into either cyclic hexamers or a porous network through classical recrystallization or the exposure of powders to solvent vapor, despite the fact that they form only dimers in solution. The cyclic hexamers have high thermal stability and exhibit moderate solid-state fluorescence. The formation of heterologous assemblies consisting of different tweezers allows for tuning these solid-state properties of the cyclic hexamer. Furthermore, (trimethylsilyl)ethynyl-substituted tweezers demonstrate solvent-vapor-induced dynamic interconversion between the cyclic hexamer and a pseudocyclic dimer in the solid state. This assembly behavior, which has been studied extensively in solution-based supramolecular chemistry, had not been accomplished in the solid state so far.

Mechanochemical Synthesis of α-halo Alkylboronic Esters

α-halo alkylboronic esters, acting as ambiphilic synthons, play a pivotal role as versatile intermediates in fields like pharmaceutical science and organic chemistry. The sequential transformation of carbon-boron and carbon-halogen bonds into a broad range of carbon-X bonds allows for programmable bond formation, facilitating the incorporation of multiple substituents at a single position and streamlining the synthesis of complex molecules. Nevertheless, the synthetic potential of these compounds is constrained by limited reaction patterns. Additionally, the conventional methods often necessitate the use of bulk toxic solvents, exhibit sensitivity to air/moisture, rely on expensive metal catalysts, and involve extended reaction times. In this report, a ball milling technique is introduced that overcomes these limitations, enabling the external catalyst-free multicomponent coupling of aryl diazonium salts, alkenes, and simple metal halides. This approach offers a general and straightforward method for obtaining a diverse array of α-halo alkylboronic esters, thereby paving the way for the extensive utilization of these synthons in the synthesis of fine chemicals.

Generic and facile mechanochemical access to versatile lattice-confined Pd(ii)-based heterometallic sites

Metal-organic frameworks (MOFs) show remarkable potential in a broad array of applications given their physical and chemical versatility. Classical synthesis of MOFs is performed using solution chemistry at elevated temperatures to achieve reversible metal-ligand bond formation. These harsh conditions may not be suitable for chemical species sensitive to high temperature or prone to deleterious reactions with solvents. For instance, Pd(ii) is susceptible to reduction under solvothermal conditions and is not a common metal node of MOFs. We report a generic and facile mechanochemical strategy that directly incorporates a series of Pd(ii)-based heterobimetallic clusters into MOFs as metal nodes without Pd(ii) being reduced to Pd(0). Mechanochemistry features advantages of short reaction time, minimum solvent, high reaction yield, and high degree of synthetic control. Catalytic performances of lattice-confined heterobimetallic sites are examined for nitrene transfer reactions and we demonstrate that the chemoselectivity for allylic amination versus olefin aziridination is readily tuned by the identity of the first-row metal ion in Pd(ii)-based heterobimetallic clusters.

Greenly Synthesized CoPBA@PANI as a Proficient Electrocatalyst for Oxygen Evolution Reaction and Its Green Sustainability Assessments

Water electrolysis is a key factor to generate mobile and sustainable energy sources for H2 production. Cobalt-based Prussian Blue analogues encompassed with polymer support electrocatalysts CoPBAX@PANI (CoPBA@PANI-100, CoPBA@PANI-200, and CoPBA@PANI-300) have been synthesized and characterized. The well-designed CoPBA@PANI-200/GC shows a low overpotential (η10) of 301 mV with a small Tafel slope (56 mV dec-1), comapred to that of IrO2 (348 mV ; 98 mV dec-1) for OER. The conductivity with stability of CoPBAX@PANI have been increased due to the synergistic effect of CoPBA with PANI. PANI provides additional active sites and shows strong binding with Co ions, and the even distribution of CoPBA overcomes the sluggish kinetics. The turnover frequency (TOF) of CoPBA@PANI-200/GC (0.0212, s-1) was ∼15 times higher than IrO2 (0.0014 s-1) at 1.60 V. Furthermore, CoPBA@PANI-200/NF delivers low overpotential of 274 mV@10 mA cm-2 and exhibits a durability of >250 h with a potential loss of 4.2%. Benefiting from strong electronic interaction between polymer support and evenly distributed CoPBA, CoPBAx@PANI shows higher electrochemical active surface area (ECSA) of 53.08 mF cm-2. The solar-based water electrolysis confirmed the practical use of CoPBA@PANI-200/NF (1.57 V) for eco-benign industrial H2 production. The CoPBA@PANI-200 shows exceptional OER performances as well as favorable kinetics to resolve the sluggish water oxidation. Hence, the cost-effective CoPBA@PANI performances opens a prospective way to boost the efficiency of other cobalt-derived catalysts in renewable energy devices.

Is bismuth(III) able to inhibit the activity of urease? Puzzling results in the quest for soluble urease complexes for agrochemical and medicinal applications

Bismuth(III) complexes have been reported to act as inhibitors of the enzyme urease, ubiquitously present in soils and implicated in the pathogenesis of several microorganisms. The general insolubility of Bi(III) complexes in water at neutral pH, however, is an obstacle to their utilization. In our quest to improve the solubility of Bi(III) complexes, we selected a compound reported to inhibit urease, namely [Bi(HEDTA)]·2H2O, and co-crystallized it with (i) racemic DL-histidine to obtain the conglomerate [Bi2(HEDTA)2(μ-D-His)2]·6H2O + [Bi2(HEDTA)2(μ-L-His)2]·6H2O, (ii) enantiopure L-histidine to yield [Bi2(HEDTA)2(μ-L-His)2]·6H2O, and (iii) cytosine to obtain [Bi(HEDTA)]·Cyt·2H2O. All compounds, synthesised by mechanochemical methods and by slurry, were characterized in the solid state by calorimetric (DSC and TGA) and spectroscopic (IR) methods, and their structures were determined using powder X-ray diffraction (PXRD) data. All compounds show an appreciable solubility in water, with values ranging from 6.8 mg mL-1 for the starting compound [Bi(HEDTA)]·2H2O to 36 mg mL-1 for [Bi2(HEDTA)2(μ-L-His)2]·6H2O. The three synthesized compounds as well as [Bi(HEDTA)]·2H2O were then tested for inhibition activity against urease. Surprisingly, no enzymatic inhibition was observed during in vitro assays using Canavalia ensiformis urease and in vivo assays using cultures of Helicobacter pylori, raising questions on the efficacy of Bi(III) compounds to counteract the negative effects of urease activity in the agro-environment and in human health.

A kinetic study of mechanically activated atom exchange: the effect of milling frequency and ball mass

This study investigates the mechanochemical reaction of hydrogen isotope exchange between solid benzoic acid and liquid heavy water. The systematic change of milling conditions revealed that the reaction rate scales with the milling frequency and the mass of the milling balls. The ball size being always the same, faster reactions stem from the use of higher milling frequencies and heavier balls. The kinetic curves are described by a kinetic model that accounts for the statistical, deformational and chemical factors involved in mechanochemical transformations. The results indicate that the reaction is driven by the generation of a new interface area caused by the deformation of the solid reactants.

Mechanochemistry Drives Alkene Difunctionalization via Radical Ligand Transfer and Electron Catalysis

A general and modular protocol is reported for olefin difunctionalization through mechanochemistry, facilitated by cooperative radical ligand transfer (RLT) and electron catalysis. Utilizing mechanochemical force and catalytic amounts of 2,2,6,6-tetramethylpiperidinyloxyl (TEMPO), ferric nitrate can leverage nitryl radicals, transfer nitrooxy-functional group via RLT, and mediate an electron catalysis cycle under room temperature. A diverse range of activated and unactivated alkenes exhibited chemo- and regioselective 1,2-nitronitrooxylation under solvent-free or solvent-less conditions, showcasing excellent functional group tolerance. Mechanistic studies indicated a significant impact of mechanochemistry and highlighted the radical nature of this nitrative difunctionalization process.

Mechanochemically Induced Solid-State Transformations of Levofloxacin

Levofloxacin hemihydrate (LVXh) is a complex fluoroquinolone drug that exists in both hydrated and anhydrous/dehydrated forms. Due to the complexity of such a compound, the primary aim of this study was to investigate the amorphization capabilities and solid-state transformations of LVXh when exposed to mechanical treatment using ball milling. Spray drying was utilized as a comparative method for investigating the capabilities of complete LVX amorphous (LVXam) formation. The solid states of the samples produced were comprehensively characterized by powder X-ray diffraction, thermal analysis, infrared spectroscopy, Rietveld method, and dynamic vapor sorption. The kinetics of the process and the quantification of phases at different time points were conducted by Rietveld refinement. The impact of the different mills, milling conditions, and parameters on the composition of the resulting powders was examined. A kinetic investigation of samples produced using both mills disclosed that it was in fact possible to partially amorphize LVXh upon mechanical treatment. It was discovered that LVXh first transformed to the anhydrous/dehydrated form γ (LVXγ), as an intermediate phase, before converting to LVXam. The mechanism of LVXam formation by ball milling was successfully revealed, and a new method of forming LVXγ and LVXam by mechanical forces was developed. Spray drying from water depicted that complete amorphization of LVXh was possible. The amorphous form of LVX had a glass transition temperature of 80 °C. The comparison of methods highlighted that the formation of LVXam is thus both mechanism- and process-dependent. Dynamic vapor sorption studies of both LVXam samples showed comparable stability properties and crystallized to the most stable hemihydrate form upon analysis. In summary, this work contributed to the detailed understanding of solid-state transformations of essential fluoroquinolones while employing greener and more sustainable manufacturing methods.

Mechanochemical Vicinal Dibromination of Unactivated Alkenes and Alkynes Using Piezoelectric Material as a Redox Catalyst

Mechanoredox chemistry is a rapidly evolving field at the intersection of mechanical forces and chemical reactions. Herein, we have reported a vicinal dibromination of unsaturated hydrocarbons using piezoelectric material (Li2TiO3) as a redox catalyst. Furthermore, the reaction can be efficiently scaled up to 10 mmol and performed under an air atmosphere at room temperature without solvents or external reductants, and Li2TiO3 can be reused multiple times without a structural change.

Mechanosynthesis of Pyrrole-2-carboxylic Acids via Copper-Catalyzed Spiroannulation/Ring-Opening Aromatization of 4-Arylidene Isoxazol-5-ones with Enamino Esters

An efficient and practical tandem reaction of 4-arylidene isoxazol-5-ones with enamino esters catalyzed by an inexpensive copper salt has been established in a ball mill. This innovative approach yields a diverse array of structurally novel pyrrole-2-carboxylic acids, showing excellent tolerance toward different functional groups. By integrating spiroannulation and ring-opening aromatization processes, this protocol introduces a facile and cost-effective strategy for synthesizing highly functionalized pyrrole derivatives.

Utilizing "Latent" Carbon: Repositioning Hydrogen-Bonded Synthons and Assemblies via Halogen Bonding to π-Systems

Molecules bearing carboxylic acid, amide, and hydroxyl groups are ubiquitous in crystal engineering, where robust hydrogen-bonded synthons centred on these functionalities enable reliable crystal structure design. We now show that halogen bonding to the carbon π-system of such molecules, traditionally ignored in crystal engineering, permits the recognition and directional assembly of the resulting hydrogen-bonded structural subunits, leaving the archetypal hydrogen-bonded ring, ladder, and chain homosynthons intact, but repositioned in space. When applied to heteromolecular synthons, this enables rearranging more complex hydrogen-bonded motifs and the evolution of binary cocrystals into ternary ones through "latent" carbon-based recognition sites, demonstrating a rational approach to build higher-order solid-state supramolecular assemblies.

Unlocking New Avenues: Solid-State Synthesis of Molecularly Imprinted Polymers

Molecularly imprinted polymers (MIPs) are established artificial molecular recognition platforms with tailored selectivity towards a target molecule, whose synthesis and functionality are highly influenced by the nature of the solvent employed in their synthesis. Steps towards the "greenification" of molecular imprinting technology (MIT) has already been initiated by the elaboration of green MIT principles; developing MIPs in a solvent-free environment may not only offer an eco-friendly alternative, but could also significantly influence the affinity and expected selectivity of the resulting binding sites. In the current study the first solvent-free mechanochemical synthesis of MIPs via liquid-assisted grinding (LAG) is reported. The successful synthesis of the imprinted polymer was functionally demonstrated by measuring its template rebinding capacity and the selectivity of the molecular recognition process in comparison with the ones obtained by the conventional, non-covalent molecular imprinting process in liquid media. The results demonstrated similar binding capacities towards the template molecule and superior chemoselectivity compared to the solution-based MIP synthesis method. The adoption of green chemistry principles with all their inherent advantages in the synthesis of MIPs may not only be able to alleviate the potential environmental and health concerns associated with their analytical (e.g., selective adsorbents) and biomedical (e.g., drug carriers or reservoirs) applications, but might also offer a conceptual change in molecular imprinting technology.

Mechanochemical Birch Reduction with Low Reactive Alkaline Earth Metals

Birch reduction and similar dissolved metal-type transformations hold significant importance in the organic synthesis toolbox. Historically, the field has been dominated by alkali metal reductants. In this study, we report that largely neglected, low-reactive alkaline earth metals can become powerful and affordable reductants when used in a ball mill under essentially solvent-free conditions, in the presence of ethylenediamine and THF as liquid additives. Calcium can reduce both electron-deficient and electron-rich arenes, with yields of products similar to those obtained with lithium metal. Magnesium reveals enhanced reducing power, enabling the reduction of benzoic acids while keeping electron-rich aromatic moieties intact and allows for chemoselective transformations. The developed mechanochemical approach uses readily available and safer-to-handle metals, operates under air and ambient temperature conditions, and can be used for gram-scale preparations. Finally, we demonstrate that the developed conditions can be used for other dissolved metal-type reductive transformations, including reductive amination, deoxygenation, dehalogenation, alkene and alkyne reductions.

Mechanochemical Regioselective [3+3] Annulation of 6-Amino Uracil with Propargyl Alcohols Catalyzed by a Brønsted Acid/Hexafluoroisopropanol

A mechanochemistry approach is developed for regioselective synthesis of functionalized dihydropyrido[2,3-d]pyrimidines by milling propargylic alcohols and 6-aminouracils with HFIP/p-TsOH. In the case of tert-propargyl alcohols, this [3+3] cascade annulation proceeded through allenylation of uracil followed by a 6-endo trig cyclization. With sec-propargyl alcohols, the reaction furnished the propargylation of uracil. This atom economy ball milling reaction allows access to a broad range of dihydropyrido[2,3-d]pyrimidine derivatives in excellent yields. We demonstrated the gram scale synthesis of 3 g and post-synthetic modifications to effect the cyclization of 5 to 6.

Contact-electro-catalysis (CEC)

Contact-electro-catalysis (CEC) is an emerging field that utilizes electron transfer occurring at the liquid-solid and even liquid-liquid interfaces because of the contact-electrification effect to stimulate redox reactions. The energy source of CEC is external mechanical stimuli, and solids to be used are generally organic as well as in-organic materials even though they are chemically inert. CEC has rapidly garnered extensive attention and demonstrated its potential for both mechanistic research and practical applications of mechanocatalysis. This review aims to elucidate the fundamental principle, prominent features, and applications of CEC by compiling and analyzing the recent developments. In detail, the theoretical foundation for CEC, the methods for improving CEC, and the unique advantages of CEC have been discussed. Furthermore, we outline a roadmap for future research and development of CEC. We hope that this review will stimulate extensive studies in the chemistry community for investigating the CEC, a catalytic process in nature.

Efficient Screening of Pharmaceutical Cocrystals by Microspacing In-Air Sublimation

Cocrystal screening and single-crystal growth remain the primary obstacles in the development of pharmaceutical cocrystals. Here, we present a new approach for cocrystal screening, microspacing in-air sublimation (MAS), to obtain new cocrystals and grow high-quality single crystals of cocrystals within tens of minutes. The method possesses the advantages of strong designable ability of devices, user-friendly control, and compatibility with materials, especially for the thermolabile molecules. A novel drug-drug cocrystal of favipiravir (FPV) with salicylamide (SAA) was first discovered by this method, which shows improved physiochemical properties. Furthermore, this method proved effective in cultivating single crystals of FPV-isonicotinamide (FPV-INIA), FPV-urea, FPV-nicotinamide (FPV-NIA), and FPV-tromethamine (FPV-Tro) cocrystals, and the structures of these cocrystals were determined for the first time. By adjusting the growth temperature and growth distance precisely, we also achieved single crystals of 10 different paracetamol (PCA) cocrystals and piracetam (PIR) cocrystals, which underscores the versatility and efficiency of this method in pharmaceutical cocrystal screening.

Mechanochemical Hydrolysis of Polysaccharide Biomass: Scope and Mechanistic Insights

Mechanical forces can affect chemical reactions in a way that thermal reactions cannot do, which may have a variety of applications. In biomass conversion, the selective conversion of cellulose and chitin is a grand challenge because they are the top two most abundant resources and recalcitrant materials that are insoluble in common solvents. However, recent works have clarified that mechanical forces enable the depolymerization of these polysaccharides, leading to the selective production of corresponding monomers and oligomers. This article reviews the mechanochemical hydrolysis of cellulose and chitin, particularly focusing on the scope and mechanisms to show a landscape of this research field and future subjects. We introduce the background of mechanochemistry and biomass conversion, followed by recent progress on the mechanochemical hydrolysis of the polysaccharides. Afterwards, a considerable space is devoted to the mechanistic consideration on the mechanochemical reactions.

Mechanochemical Cyclotrimerization: A Versatile Tool to Covalent Organic Frameworks with Tunable Stacking Mode

We introduce the first mechanochemical cyclotrimerization of nitriles, a facile strategy for synthesizing triazine-containing molecules and materials, overcoming challenges related to carbonization and solubility. Conducting this solid-state approach in a mixer ball mill with 4-Methylbenzonitrile, we synthesize Tris(4-methylphenyl)-1,3,5-triazine quantitatively in as little as 90 minutes. Just as fast, this mechanochemical method facilitates the synthesis of the covalent triazine framework CTF-1 using 1,4 Dicyanobenzene. Material characterization confirms its porous (650 m2 g-1) and crystalline nature. Adjusting the induced mechanical energy allows control over the obtained stacking conformation of the resulting CTFs - from a staggered AB arrangement to an eclipsed AA stacking conformation. Finally, a substrate scope demonstrates the versatility of this approach, successfully yielding various CTFs.

Comparison of mechanochemical methods in the synthesis of binaphthol-benzoquinone based cocrystals

Mechanochemical methods either under neat or liquid assisted conditions have proven to be successful in making cocrystals. In this paper we compare the outcome of cocrystallization using two different mechanochemical methods, ball milling (BM) and resonant acoustic mixing (RAM), with solution crystallization. Racemic binaphthol and benzoquinone based binary and ternary cocrystals were investigated by BM and RAM. Both mechanochemical methods were successful in making the binary and ternary cocrystals that have been observed in solid state and solution. It is shown that the type of mechanochemical force imparted to the sample is very different between BM and RAM and this in turn leads to different cocrystallization outcomes. Thus, different mechanochemical methods should not be treated as the same and care must be taken when choosing a mechanochemical method for a particular application.

Synthesis of Quinazolinones and Benzothiazoles Using α-Keto Acids under Ball Milling

Mechanochemistry refers to the initiation of chemical reactions via mechanical forces such as milling, grinding, or shearing to achieve the chemical transformations. As a manifestation of mechanocatalysis, herein, an oxidant-free and solvent-free approach for the synthesis of quinazolinones (23 derivatives) and benzothiazoles (23 derivatives) has been developed through stainless-steel-driven decarboxylative acyl radical generation from α-keto acids. A library of 2-arylquinazolinones and 2-arylbenzothiazoles has been prepared in moderate to good yields at room temperature. Moreover, control experiments and XPS studies supported the reduction (by zerovalent iron) of molecular oxygen through the moderate abrasion of balls, which promoted the generation of a superoxide radical anion via a SET process.

Mechanochemical hydroquinone regeneration promotes gold salt reduction in sub-stoichiometric conditions of the reducing agent

Bottom-up mechanochemical synthesis (BUMS) has been demonstrated to be an efficient approach for the preparation of metal nanoparticles (NPs), protected by surface agents or anchored on solid supports. However, there are limitations, such as precise size and morphological control, due to a lack of knowledge about the mechanically induced processes of NP formation under milling. In this article, we further investigate the BUMS of AuNPs. Using SiO2 as a solid support, we studied the effect of typical reducing agents, namely NaBH4, L-ascorbic acid, and hydroquinone (HQ), on the conversion of a AuIII source. XANES showed that HQ is the strongest reducing agent under our experimental conditions, leading to the quantitative conversion of gold salt in a few minutes. Interestingly, even when HQ was used in sub-stoichiometric amounts, AuIII could be reduced to ratios higher than 85% after two minutes of milling. Investigations into the byproducts by 1H NMR and GC-FID/MS enabled the identification HQ regeneration and the formation of its derivatives. We mainly focused on benzoquinone (BQ), which is the product of the oxidation of HQ as it reduces the gold salt. We could demonstrate that HQ is regenerated from BQ exclusively under milling and acidic conditions. The regenerated HQ and other HQ-chlorinated molecules could then reduce gold-oxidized species, leading to higher conversions and economy of reactants. Our study highlights the intriguing and complex mechanisms of mechanochemical systems, in addition to fostering the atom and energy economy side of mechanochemical means to produce metal nanoparticles.

Solid-State Synthesis of B←N Adducts by the Amine-Facilitated Trimerization of the Phenylboronic Acid

Stable boroxine-amine adducts comprising dative B←N bond(s) were prepared by mechanochemically-induced reactions of phenylboronic acid (PBA) and amines (pyridine, DMAP, 1H-pyrazole, piperidine, DABCO, hexamethylenetetramine, or 4,4'-bipyridine). In-situ Raman monitoring, ex-situ PXRD and DFT calculations were used for product identification. Stoichiometry of the product (3 : 1, 3 : 2 or 6 : 1 adduct) was controlled by the amine structure and the molar ratio of the reactants. The 1 : 2 H-bonded assembly of PBA and 4,4'-bipyridine (bpy) was confirmed as an intermediate in the adduct formation for bpy. Competitive binding experiments indicated that the exchange of the amines in the 3 : 1 adducts follows the computed adduct stabilities that increase with the amine basicity. Following the DFT prediction, the first adduct with two different amines, DMAP and pip, bound to one boroxine moiety was isolated and structurally characterized. Results show that calculations can be used to predict possible and preferred product(s) and their spectral characteristics.

Chemodivergent mechanosynthesis of cyclopentenyl and pyrrolinyl spirobarbiturates from unsaturated barbiturates and enamino esters

A novel and interesting controllable spirocyclization of unsaturated barbiturates with enamino esters for the assembly of cyclopentenyl and pyrrolinyl spirobarbiturates has been developed under ball-milling conditions. The present protocol features high chemoselectivity and efficiency, excellent functional group tolerance and mild reaction conditions.

Intermediates in Mechanochemical Reactions

Mechanochemical reactions offer methodological and environmental advantages for chemical synthesis, constantly attracting attention within the scientific community. Besides unmistakable sustainability advantages, the conditions under which mechanochemical reactions occur, namely solventless conditions, sometimes facilitate the isolation of otherwise labile or inaccessible products. Despite these advantages, limited knowledge exists regarding the mechanisms of these reactions and the types of intermediates involved. Nevertheless, in an expanding number of cases, ex situ and in situ monitoring techniques have allowed for the observation, characterization, and isolation of reaction intermediates in mechanochemical transformations. In this Minireview, we present a series of examples in which reactive intermediates have been detected in mechanochemical reactions spanning organic, organometallic, inorganic, and materials chemistry. Many of these intermediates were stabilized by non-covalent interactions, which played a pivotal role in guiding the chemical transformations. We believe that by uncovering and understanding such instances, the growing mechanochemistry community could find novel opportunities in catalysis and discover new mechanochemical reactions while achieving simplification in chemical reaction design.

Exploring mechanochemistry of pharmaceutical cocrystals: effect of incident angle on molecular mixing during simulated indentations of two organic solids

The solid-state reaction of the active pharmaceutical ingredient theophylline with citric acid is a well-established example of a mechanochemical reaction, leading to a model pharmaceutical cocrystal. Here, classical force field molecular dynamics was employed to investigate the molecular mixing and structural distortion that take place on the mechanically driven indentation of a citric acid nanoparticle on a slab of crystalline theophylline. Through non-equilibrium molecular dynamics simulations, a 6 nm diameter nanoparticle of citric acid was introduced onto an open (001) surface of a theophylline crystal, varying both the angle of incidence of the nanoparticle between 15° and 90° and the indentation speed between 1 m s-1 and 16 m s-1. This theoretical study enabled the evaluation of how these two parameters promote molecular mixing and overall structural deformation upon the mechanical contraction of theophylline and citric acid, both of which are important parameters underlying mechanochemical cocrystallisation. The results show that the angle of incidence plays a key role in the molecular transfer ability between the two species and in the structural disruption of the initially spherical nanoparticles. Changing the indentation speed, however, did not lead to a discernible trend in molecular mixing, highlighting the importance of the incident angle in mechanochemical events in the context of supramolecular chemistry, such as the disruption of the crystal structure and molecular transfer between molecular crystals.

Synthesis of bioactive evodiamine and rutaecarpine analogues under ball milling conditions

Mechanochemical reactions achieved by processes such as milling and grinding are promising alternatives to traditional solution-based chemistry. This approach not only eliminates the need for large amounts of solvents, thereby reducing waste generation, but also finds applications in chemical and materials synthesis. The focus of this study is on the synthesis of quinazolinone derivatives by ball milling, in particular evodiamine and rutaecarpine analogues. These compounds are of interest due to their diverse bioactivities, including potential anticancer properties. The study examines the reactions carried out under ball milling conditions, emphasizing their efficiency in terms of shorter reaction times and reduced environmental impact compared to conventional methods. The ball milling reaction of evodiamine and rutaecarpine analogues resulted in yields of 63-78% and 22-61%, respectively. In addition, these compounds were tested for their cytotoxic activity, and evodiamine exhibited an IC50 of 0.75 ± 0.04 μg mL-1 against the Ca9-22 cell line. At its core, this research represents a new means to synthesise these compounds, providing a more environmentally friendly and sustainable alternative to traditional approaches.

Mechanophotocatalysis: A Generalizable Approach to Solvent-minimized Photocatalytic Reactions for Organic Synthesis

This proof-of-concept study cements the viability and generality of mechanophotocatalysis, merging mechanochemistry and photocatalysis to enable solvent-minimized photocatalytic reactions. We demonstrate the transmutation of four archetypal solution-state photocatalysis reactions to a solvent-minimized environment driven by the combined actions of milling, light, and photocatalysts. The chlorosulfonylation of alkenes and the pinacol coupling of aldehydes and ketones were conducted under solvent-free conditions with competitive or superior efficiencies to their solution-state analogues. Furthermore, decarboxylative alkylations are shown to function efficiently under solvent-minimized conditions, while the photoinduced energy transfer promoted [2+2] cycloaddition of chalcone experiences a significant initial rate enhancement over its solution-state variant. This work serves as a platform for future discoveries in an underexplored field: validating that solvent-minimized photocatalysis is not only generalizable and competitive with solution-state photocatalysis, but can also offer valuable advantages.

Mechanochemistry enabling highly efficient Birch reduction using sodium lumps and d-(+)-glucose

In this study, a mechanochemical protocol for highly efficient and ammonia-free sodium-based Birch reduction was developed, leveraging the use of cheap and easy-to-handle sodium lumps. The key to achieving this transformation is the use of d-(+)-glucose as a proton source, which solidifies the reaction mixture in bulk state, enhancing the efficiency of the in situ mechanical activation of sodium lumps through the ball-milling process. Under the developed conditions, a diverse array of aromatic and heteroaromatic compounds were selectively reduced to produce the corresponding 1,4-cyclohexadiene derivatives in high yields within 30 min. Notably, all synthetic operations can be carried out without inert gases or the need for dry or bulk organic solvents. Furthermore, a scaled-up synthesis can be conducted without any yield losses. These results suggest that the present mechanochemical approach offers a more convenient, economically attractive, and sustainable alternative to previously established Birch reduction protocols.

Solid-state mechanochemistry for the rapid and efficient synthesis of tris-cyclometalated iridium(iii) complexes

Tris-cyclometalated iridium(iii) complexes have received widespread attention as attractive prospective materials for e.g., organic light-emitting diodes (OLEDs), photoredox catalysts, and bioimaging probes. However, their preparation usually requires prolonged reaction times, significant amounts of high-boiling solvents, multistep synthesis, and inert-gas-line techniques. Unfortunately, these requirements represent major drawbacks from both a production-cost and an environmental perspective. Herein, we show that a two-step mechanochemical protocol using ball milling enables the rapid and efficient synthesis of various tris-cyclometalated iridium(iii) complexes from relatively cheap iridium(iii) chloride hydrate without the use of significant amounts of organic solvent in air. Notably, a direct one-pot procedure is also demonstrated. The present solid-state approach can be expected to inspire the development of cost-effective and timely production methods for these valuable iridium-based complexes, as well as the discovery of new phosphorescent materials, sensors, and catalysts.

Boosting the Catalase-Like Activity of SAzymes via Facile Tuning of the Distances between Neighboring Atoms in Single-Iron Sites

A nanozyme with neighboring single-iron sites (Fe2 -SAzyme) was introduced as a bioinspired catalase mimic, featuring excellent activity under varied conditions, twice as high as that of random Fe1 -SAzyme and ultrahigh H2 O2 affinity as that of bioenzymes. Surprisingly, the interatomic spacing tuning between adjacent iron sites also suppressed the competitive peroxidase pathway, remarkably increasing the catalase/peroxidase selectivity up to ~6 times compared to Fe1 -SAzyme. This dramatically switched the catalytic activity of Fe-SAzymes from generating (i.e. Fe1 -SAzymes, preferably mimicking peroxidase) to scavenging ROS (i.e. Fe2 -SAzymes, dominantly mimicking catalase). Theoretical and experimental investigations suggested that the pairwise single-iron sites may serve as a robust molecular tweezer to efficiently trap and decompose H2 O2 into O2 , via cooperative hydrogen-bonding induced end-bridge adsorption. The versatile mechano-assisted in situ MOF capsulation strategy enabled facile access to neighboring M2 -SAzyme (M=Fe, Ir, Pt), even up to a 1000 grams scale, but with no obvious scale-up effect for both structures and performances.

Rhodium(II)-Catalyzed N-H Insertions of Carbenes under Mechanochemical Conditions

Under mechanochemical conditions in a mixer mill, Rh2(OAc)4 catalyzes the reaction between aryldiazoesters and anilines to give α-amino esters. The process proceeds under mild conditions and is insensitive to air. It is solvent-free and scalable. A broad substrate scope, short reaction times, operational simplicity, and good functional group tolerance are additional salient features of this protocol.

Mechanochemical Synthesis of Cuprous Complexes for X-ray Scintillation and Imaging

Cuprous complex scintillators show promise for X-ray detection with abundant raw materials, diverse luminescent mechanisms, and adjustable structures. However, their synthesis typically requires a significant amount of organic solvents, which conflict with green chemistry principles. Herein, we present the synthesis of two high-performance cuprous complex scintillators using a simple mechanochemical method for the first time, namely [CuI(PPh3)2R] (R = 4-phenylpyridine hydroiodide (PH, Cu-1) and 4-(4-bromophenyl)pyridine hydroiodide (PH-Br, Cu-2). Both materials demonstrated remarkable scintillation performances, exhibiting radioluminescence (RL) intensities 1.52 times (Cu-1) and 2.52 times (Cu-2) greater than those of Bi4Ge3O12 (BGO), respectively. Compared to Cu-1, the enhanced RL performance of Cu-2 can be ascribed to its elevated quantum yield of 51.54%, significantly surpassing that of Cu-1 at 37.75%. This excellent luminescent performance is derived from the introduction of PH-Br, providing a more diverse array of intermolecular interactions that effectively constrain molecular vibration and rotation, further suppressing the nonradiative transition process. Furthermore, Cu-2 powder can be prepared into scintillator film with excellent X-ray imaging capabilities. This work establishes a pathway for the rapid, eco-friendly, and cost-effective synthesis of high-performance cuprous complex scintillators.

Direct Synthesis of Benzoselenophene and Benzothiophene Derivatives from 1,1-Diarylethenes and Biaryls by Chalcogen Cation-Mediated Successive Bond Formation

A Tf2O-mediated sequential C-Se bond-forming reaction of 1,1-diarylethenes and biaryls with methaneselenic acid has been developed. Upon demethylation workup with ethanolamine, the corresponding benzoselenophene derivatives are obtained directly. The related synthesis of benzothiophene derivatives with sodium methanesulfinate is also possible with the unique assistance of the ball milling technique. The active species is considered to be a highly electrophilic chalcogen cation, which enables successive bond formation even at room temperature.

Direct in situ measurement of polymorphic transition temperatures under thermo-mechanochemical conditions

For the first time, we directly measured the onset and completion temperatures of polymorphic transitions under thermo-mechanochemical conditions by simultaneous in situ synchrotron powder X-ray diffraction and temperature monitoring. We determined the thermo-mechanochemical polymorphic transition temperature in 1-adamantyl-1-diamantyl ether to be 31 °C lower than the transition temperature determined by DSC. Our findings highlight the uniqueness of thermo-mechanochemical conditions, with potential applications in polymorph screening.

A contact-electro-catalysis process for producing reactive oxygen species by ball milling of triboelectric materials

Ball milling is a representative mechanochemical strategy that uses the mechanical agitation-induced effects, defects, or extreme conditions to activate substrates. Here, we demonstrate that ball grinding could bring about contact-electro-catalysis (CEC) by using inert and conventional triboelectric materials. Exemplified by a liquid-assisted-grinding setup involving polytetrafluoroethylene (PTFE), reactive oxygen species (ROS) are produced, despite PTFE being generally considered as catalytically inert. The formation of ROS occurs with various polymers, such as polydimethylsiloxane (PDMS) and polypropylene (PP), and the amount of generated ROS aligns well with the polymers' contact-electrification abilities. It is suggested that mechanical collision not only maximizes the overlap in electron wave functions across the interface, but also excites phonons that provide the energy for electron transition. We expect the utilization of triboelectric materials and their derived CEC could lead to a field of ball milling-assisted mechanochemistry using any universal triboelectric materials under mild conditions.

Mechanochemical Scholl Reaction on Phenylated Cyclopentadiene Core: One-Step Synthesis of Fluoreno[5]helicenes

In this study, we explore feasibility of the mechanochemical approach in the synthesis of tetrabenzofluorenes (fluoreno[5]helicenes). For this, commercially available phenylated cyclopentadiene precursors are subjected to the Scholl reaction in the solid state using FeCl3 as an oxidant and sodium chloride as the solid reaction medium. This ball milling process gave access to the 5-membered ring containing-helicenes in one synthetic step in high (95-96 %) isolated yields. The solution-phase reactions, however, were found to be moderate to low yielding in this regard (10-40 %).

Shake, shear, and grind! - the evolution of mechanoredox polymerization methodology

In the last half decade, mechanoredox catalysis has enabled an entirely new genre of polymerization methodology. In this paradigm, mechanical force, such as ultrasonic cavitation bubble collapse or ball mill grinding, polarizes piezoelectric nanoparticles; the resultant piezopotential drives the redox processes necessary for free- and controlled-radical polymerizations. Since being introduced, evolution of these methods facilitates exploration of mechanistic underpinnings behind key electron-transfer events. Mechanical force has not only been identified as a "greener" alternative to more traditional reaction stimuli (e.g., heat, light) for the synthesis of commodity polymers, but also a potential technology to enable the production of novel thermoplastic and thermoset materials that are either challenging, or even impossible, to access using conventional solution-state approaches. In this Feature Article, significant contributions to such methods are highlighted within. Advances and ongoing challenges in both ultrasound and ball milling driven reactions for radical polymerization and crosslinking are identified and discussed.

Mechanochemical Iron-Catalyzed Nitrene Transfer Reactions: Direct Synthesis of N-Acyl Sulfonimidamides from Sulfinamides and Dioxazolones

A mechanochemical synthesis of sulfonimidamides by iron(II)-catalyzed exogenous ligand-free N-acyl nitrene transfer to sulfinamides is reported. The one-step method tolerates a wide range of sulfinamides with various substituents under solvent-free ambient conditions. Compared to its solution-phase counterpart, this mechanochemical approach shows better conversion and chemoselectivity. Mechanistic investigations by ESI-MS revealed the generation of crucial nitrene iron intermediates.

Opportunities and Challenges in Applying Solid-State NMR Spectroscopy in Organic Mechanochemistry

In recent years it is shown that mechanochemical strategies can be beneficial in directed conversions of organic compounds. Finding new reactions proved difficult, and due to the lack of mechanistic understanding of mechanochemical reaction events, respective efforts have mostly remained empirical. Spectroscopic techniques are crucial in shedding light on these questions. In this overview, the opportunities and challenges of solid-state nuclear magnetic resonance (NMR) spectroscopy in the field of organic mechanochemistry are discussed. After a brief discussion of the basics of high-resolution solid-state NMR under magic-angle spinning (MAS) conditions, seven opportunities for solid-state NMR in the field of organic mechanochemistry are presented, ranging from ex situ approaches to structurally elucidated reaction products obtained by milling to the potential and limitations of in situ solid-state NMR approaches. Particular strengths of solid-state NMR, for instance in differentiating polymorphs, in NMR-crystallographic structure-determination protocols, or in detecting weak noncovalent interactions in molecular-recognition events employing proton-detected solid-state NMR experiments at fast MAS frequencies, are discussed.

Force-Triggered Self-Destructive Hydrogels

Self-destructive polymers (SDPs) are defined as a class of smart polymers that autonomously degrade upon experiencing an external trigger, such as a chemical cue or optical excitation. Because SDPs release the materials trapped inside the network upon degradation, they have potential applications in drug delivery and analytical sensing. However, no known SDPs that respond to external mechanical forces have been reported, as it is fundamentally challenging to create mechano-sensitivity in general and especially so for force levels below those required for classical force-induced bond scission. To address this challenge, the development of force-triggered SDPs composed of DNA crosslinked hydrogels doped with nucleases is described here. Externally applied piconewton forces selectively expose enzymatic cleavage sites within the DNA crosslinks, resulting in rapid polymer self-degradation. The synthesis and the chemical and mechanical characterization of DNA crosslinked hydrogels, as well as the kinetics of force-triggered hydrolysis, are described. As a proof-of-concept, force-triggered and time-dependent rheological changes in the polymer as well as encapsulated nanoparticle release are demonstrated. Finally, that the kinetics of self-destruction are shown to be tuned as a function of nuclease concentration, incubation time, and thermodynamic stability of DNA crosslinkers.

Biasing the Formation of Solution-Unstable Intermediates in Coordination Self-Assembly by Mechanochemistry

Due to the reversible nature of coordination bonds and solvation effect, coordination self-assembly pathways are often difficult to elucidate experimentally in solution, as intermediates and products are in constant equilibration. The present study shows that some of these transient and high-energy self-assembly intermediates can be accessed by means of ball-milling approaches. Among them, highly aqueous-unstable Pd3 L11 and Pd6 L14 open-cage intermediates of the framed Fujita Pd6 L14 cage and Pd2 L22 , Pd3 L21 and Pd4 L22 intermediates of Mukherjee Pd6 L24 capsule are successfully trapped in solid-state, where Pd=tmedaPd2+ , L1=2,4,6-tris(4-pyridyl)-1,3,5-triazine and L2=1,3,5-tris(1-imidazolyl)benzene). Their structures are assigned by a combination of solution-based characterization tools such as standard NMR spectroscopy, DOSY NMR, ESI-MS and X-ray diffraction. Collectively, these results highlight the opportunity of using mechanochemistry to access unique chemical space with vastly different reactivity compared to conventional solution-based supramolecular self-assembly reactions.

Synthesis without solvent: consequences for mechanochemical reactivity

Solvents are so nearly omnipresent in synthetic chemistry that a classic question for their use has been: "What is the best solvent for this reaction?" The increasing use of mechanochemical approaches to synthesis-by grinding, milling, extrusion, or other means-and usually with no, or only limited, amounts of solvent, has raised an alternative question for the synthetic chemist: "What happens if there is no solvent?" This review focuses on a three-part answer to that question: when there is little change ("solvent-optional" reactions); when solvent needs to be present in some form, even if only in the amounts provided by liquid-assisted (LAG) or solvate-assisted grinding; and those cases in which mechanochemistry allows access to compounds that cannot be obtained from solution-based routes. The emphasis here is on inorganic and organometallic systems, including selected examples of mechanosynthesis and mechanocatalysis. Issues of mechanochemical depictions and the adequacy of LAG descriptions are also reviewed.

Mechanochemical Pd-Catalyzed Amino- and Oxycarbonylations using FeBr2(CO)4 as a CO Source

Herein, we describe the development of mechanochemical amino- and oxycarbonylation employing FeBr2(CO)4 as a solid CO source. This Pd/XantPhos-catalyzed reaction affords a range of carboxamides and esters from aryl iodides and various amines or phenols. Both primary and secondary amines, including amino acids, can be employed as N-nucleophiles.

Crystal engineering: from promise to delivery

Twenty years ago, I wrote a Chem. Commun. feature article entitled "Crystal Engineering: where from? Where to?": an update is in order. In this Highlight I argue that molecular crystal engineering, one of the areas of fast development of the field, has definitely reached the stage of "delivering the goods": new functional materials assembled via non-covalent interactions and/or improved properties of existing materials. As a proof of concept, the crystal engineering approach to tackle two contemporary emergencies, namely, urea fertilizer degradation and development of antimicrobial resistance by pathogens, is discussed and application-driven examples are provided.

Ball milling synthesis of S-quinolyl xanthates via coupling of haloquinolines with potassium O-alkyl xanthates

An environmentally benign protocol that provides various S-quinolyl xanthates via a ball milling enabled cross coupling reaction of haloquinolines and readily available potassium O-alkyl xanthates is first reported. The reaction proceeded well under mild, transition metal- and solvent-free conditions, making it an attractive method for the introduction of xanthates into the quinoline scaffold.

Milling Medium-Free Suzuki Coupling by Direct Mechanocatalysis: From Mixer Mills to Resonant Acoustic Mixers

Here we describe the development of a sustainable and cost-effective approach for catalytic cross-coupling reactions in mechanochemistry. It is found that the substrate's impact with the vessel wall alone is sufficient to initiate the reaction, thus indicating that milling balls function primarily as a mixing agent for direct mechanocatalytic Suzuki coupling. The absence of milling balls can be offset by adjusting the rheology using liquid-assisted grinding (LAG). The LAG sweet spot of 0.25 μL mg-1 is confirmed for both resonance acoustic mixers (RAMs) and ball-free mixer mills, and is higher than in the presence of milling balls. RAMs exhibit excellent performance in the Suzuki reaction, achieving yields of 90 % after 60 min and complete conversion after 90 min. The longevity of the milling vessel is significantly improved in a RAM, allowing for at least 20 reactions without deterioration.