1
|
Budischowsky D, Sulaeva I, Støpamo FG, Lehrhofer AF, Hettegger H, Várnai A, Eijsink VGH, Rosenau T, Potthast A. Oxidized reducing ends in celluloses: Quantitative profiling relative to molar mass distribution by fluorescence labeling. Carbohydr Polym 2024; 340:122210. [PMID: 38858031 DOI: 10.1016/j.carbpol.2024.122210] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/29/2024] [Revised: 04/23/2024] [Accepted: 04/24/2024] [Indexed: 06/12/2024]
Abstract
Fluorescence labeling with N-(1-naphthyl)ethylenediamine is highly effective for quantifying oxidized reducing end groups (REGs) in cellulosic materials. When combined with size exclusion chromatography in DMAc/LiCl, along with fluorescence / multiple-angle laser light scattering / refractive index detection, a detailed profile of C1-oxidized REGs relative to the molecular weight distribution of the cellulosic material can be obtained. In this work, the derivatization process was extensively optimized, to be carried out heterogeneously in the solvent N-methyl-2-pyrrolidone. Furthermore, we show that to achieve high selectivity for carboxyl groups at the C1 position, keto and aldehyde groups need to be selectively reduced (e.g., by NaBH4), and carboxyl groups other than at C1 need to be blocked (e.g., by methylation with (trimethylsilyl)diazomethane) prior to fluorescence labeling of carboxyl groups at C1 position. Finally, we demonstrate the practical value of the analytical method by measuring the content of the C1-oxidized REGs in cellulose samples after chemical (by Pinnick oxidation) or enzymatic (by treatment with C1-oxidizing LPMO enzymes) oxidation of various pulp samples.
Collapse
Affiliation(s)
- David Budischowsky
- Institute of Chemistry of Renewable Resources, Department of Chemistry, University of Natural Resources and Life Sciences, Vienna (BOKU), Muthgasse 18, A-1190 Vienna, Austria.
| | - Irina Sulaeva
- Institute of Chemistry of Renewable Resources, Department of Chemistry, University of Natural Resources and Life Sciences, Vienna (BOKU), Muthgasse 18, A-1190 Vienna, Austria; Core Facility Analysis of Lignocellulosics (ALICE), University of Natural Resources and Life Sciences, Vienna (BOKU), Konrad-Lorenz-Strasse 24, A-3430 Tulln, Austria.
| | - Fredrik G Støpamo
- Faculty of Chemistry, Biotechnology and Food Science, NMBU - Norwegian University of Life Sciences, 1432 Ås, Norway.
| | - Anna F Lehrhofer
- Institute of Chemistry of Renewable Resources, Department of Chemistry, University of Natural Resources and Life Sciences, Vienna (BOKU), Muthgasse 18, A-1190 Vienna, Austria.
| | - Hubert Hettegger
- Institute of Chemistry of Renewable Resources, Department of Chemistry, University of Natural Resources and Life Sciences, Vienna (BOKU), Muthgasse 18, A-1190 Vienna, Austria; Christian Doppler Laboratory for Cellulose High-Tech Materials, University of Natural Resources and Life Sciences, Vienna (BOKU), Konrad-Lorenz-Strasse 24, A-3430 Tulln, Austria.
| | - Anikó Várnai
- Faculty of Chemistry, Biotechnology and Food Science, NMBU - Norwegian University of Life Sciences, 1432 Ås, Norway.
| | - Vincent G H Eijsink
- Faculty of Chemistry, Biotechnology and Food Science, NMBU - Norwegian University of Life Sciences, 1432 Ås, Norway.
| | - Thomas Rosenau
- Institute of Chemistry of Renewable Resources, Department of Chemistry, University of Natural Resources and Life Sciences, Vienna (BOKU), Muthgasse 18, A-1190 Vienna, Austria.
| | - Antje Potthast
- Institute of Chemistry of Renewable Resources, Department of Chemistry, University of Natural Resources and Life Sciences, Vienna (BOKU), Muthgasse 18, A-1190 Vienna, Austria.
| |
Collapse
|
2
|
Zhang M, Zhu P, Liu J, Zhang H, Tang Y. Introducing terminal alkyne groups at the reducing end of cellulose nanocrystals by aldimine condensation for further click reaction. Int J Biol Macromol 2024; 269:131983. [PMID: 38777685 DOI: 10.1016/j.ijbiomac.2024.131983] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/14/2024] [Revised: 04/17/2024] [Accepted: 04/28/2024] [Indexed: 05/25/2024]
Abstract
In recent years, click reactions with cellulose nanocrystals (CNC) participation have gradually become a research hotspot. Carboxylamine condensation is the most used method to introduce terminal alkyne groups at the reducing end of CNC as reaction sites for click reactions. However, hydroxyl groups on CNC surface would be slightly oxidized during the carboxyamine condensation process, inducing the potential positions of introduced alkynes would be not only at the reducing end but also on CNC surface. Here, aldimine condensation was proposed to introduce terminal alkyne groups just at the reducing end of CNC, and a systematic comparison analysis was conducted with carboxylamine condensation. Firstly, the selectivity and extent of alkynylation were characterized by XPS and EA. Secondly, the end aldehyde content in these CNC samples was measured by the BCA method, which quantitatively explained the grafting efficiency of aldimine condensation and further verified its feasibility. Thirdly, the clickability of the modified CNC samples was confirmed through XPS analysis of the products after a pre-designed click reaction. In sum, aldimine condensation was proven to be a simple and effective strategy for introducing terminal alkyne groups at the reducing end of CNC, which could be used as reaction sites for further click reactions.
Collapse
Affiliation(s)
- Miao Zhang
- College of Textile Science and Engineering (International Institute of Silk), Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China
| | - Peng Zhu
- College of Textile Science and Engineering (International Institute of Silk), Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China; Zhejiang Sci-Tech University Shengzhou Innovation Research Institute, Shengzhou 312400, China.
| | - Jianxin Liu
- Sunrise New Material Research Institute, Shengzhou, Zhejiang 312400, China
| | - Huapeng Zhang
- College of Textile Science and Engineering (International Institute of Silk), Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China
| | - Yanjun Tang
- College of Textile Science and Engineering (International Institute of Silk), Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China
| |
Collapse
|
3
|
Jiao H, Zhang M, Sun J, Ali SS, Zhang H, Li Y, Wang X, Fu Y, Wang X, Liu J. Exploring the potential of selective oxidation in bioconjugation of collagen with xyloglucan carboxylates. Int J Biol Macromol 2024; 269:131771. [PMID: 38688792 DOI: 10.1016/j.ijbiomac.2024.131771] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/10/2024] [Revised: 03/09/2024] [Accepted: 04/20/2024] [Indexed: 05/02/2024]
Abstract
Xyloglucan (XG), as a natural biopolymer, possesses a sound biocompatibility and an impressive biodegradability, which are usually featured with abundant hydroxyl groups available for the bioconjugation with a bioactive moiety, suggesting a promising or unique value possibly applied in the field of biomedicine. In this study, XG was extracted from Tamarind seeds and subjected to four regioselective oxidation methods to introduce carboxyl groups onto the XG molecules for a bioconjugation with collagen. Galactose oxidase and reducing end aldehyde group oxidation mainly resulted in a low carboxylate content at ∼0.34 mmol/g, whereas the primary and secondary hydroxyl group oxidations would lead to a high carboxyl content at ∼0.84 mmol/g. The number-average molar mass (Mn) and weight-average molar mass (Mw) of XG were 8.8 × 105 g/mol and 1.1 × 106 g/mol, respectively. The oxidized XGs were then subjected to a further biofunctionalization with the collagen through EDC/NHS coupling, which exhibited a degree of conjugation rate, ranged from 50 % to 72 %. The collagen-conjugated at the C6 position of XGs exhibited the highest cell viability recorded at 168 % in promoting cell growth and proliferation after 72 h of culture, surpassing that of pure collagen recorded at 138 %, which may indeed suggest a promising value in a biomedical application.
Collapse
Affiliation(s)
- Haixin Jiao
- Biofuels Institute, School of Emergency Management, School of Environment and Safety Engineering, Jiangsu University, Zhenjiang 212013, China
| | - Meng Zhang
- Department of Environmental Science and Engineering, Fudan University, Shanghai 200433, China
| | - Jianzhong Sun
- Biofuels Institute, School of Emergency Management, School of Environment and Safety Engineering, Jiangsu University, Zhenjiang 212013, China; International Joint Research Center on High-value Utilization of Agricultural Waste Biomass between Jiangsu University and Mie University, Zhenjiang 212013, China.
| | - Sameh Samir Ali
- Botany Department, Faculty of Science, Tanta University, Tanta 31527, Egypt
| | - Hongxing Zhang
- Biofuels Institute, School of Emergency Management, School of Environment and Safety Engineering, Jiangsu University, Zhenjiang 212013, China
| | - Yan Li
- Biofuels Institute, School of Emergency Management, School of Environment and Safety Engineering, Jiangsu University, Zhenjiang 212013, China
| | - Xiangyu Wang
- Biofuels Institute, School of Emergency Management, School of Environment and Safety Engineering, Jiangsu University, Zhenjiang 212013, China
| | - Yinyi Fu
- Biofuels Institute, School of Emergency Management, School of Environment and Safety Engineering, Jiangsu University, Zhenjiang 212013, China
| | - Xiulun Wang
- International Joint Research Center on High-value Utilization of Agricultural Waste Biomass between Jiangsu University and Mie University, Zhenjiang 212013, China; Graduate School of Bioresources, Mie University, Tsu, Mie 514-8507, Japan
| | - Jun Liu
- Biofuels Institute, School of Emergency Management, School of Environment and Safety Engineering, Jiangsu University, Zhenjiang 212013, China; International Joint Research Center on High-value Utilization of Agricultural Waste Biomass between Jiangsu University and Mie University, Zhenjiang 212013, China.
| |
Collapse
|
4
|
Zoppe JO. Cellulose Nanocrystal Allomorphs: Morphology, Self-Assembly, and Polymer End-Tethering toward Chiral Metamaterials. ACCOUNTS OF MATERIALS RESEARCH 2024; 5:385-391. [PMID: 38694188 PMCID: PMC11059101 DOI: 10.1021/accountsmr.3c00278] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/21/2023] [Indexed: 05/04/2024]
Affiliation(s)
- Justin O. Zoppe
- Universitat Politècnica
de Catalunya (UPC) − BarcelonaTech, POLY2 Group, Department
of Materials Science & Engineering, School of Industrial, Aerospace and Audiovisual Engineering of Terrassa
(ESEIAAT), Carrer de
Colom, 11, 08222 Terrassa, Spain
| |
Collapse
|
5
|
Zhai Z, Edgar KJ. Polysaccharide Aldehydes and Ketones: Synthesis and Reactivity. Biomacromolecules 2024; 25:2261-2276. [PMID: 38490188 PMCID: PMC11005020 DOI: 10.1021/acs.biomac.4c00020] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/07/2024] [Revised: 03/02/2024] [Accepted: 03/04/2024] [Indexed: 03/17/2024]
Abstract
Polysaccharides are biodegradable, abundant, sustainable, and often benign natural polymers. The achievement of selective modification of polysaccharides is important for targeting specific properties and structures and will benefit future development of highly functional, sustainable materials. The synthesis of polysaccharides containing aldehyde or ketone moieties is a promising tool for achieving this goal because of the rich chemistry of aldehyde or ketone groups, including Schiff base formation, nucleophilic addition, and reductive amination. The obtained polysaccharide aldehydes or ketones themselves have rich potential for making useful materials, such as self-healing hydrogels, polysaccharide-protein therapeutic conjugates, or drug delivery vehicles. Herein, we review recent advances in synthesizing polysaccharides containing aldehyde or ketone moieties and briefly introduce their reactivity and corresponding applications.
Collapse
Affiliation(s)
- Zhenghao Zhai
- Macromolecules
Innovation Institute, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Kevin J. Edgar
- Macromolecules
Innovation Institute, Virginia Tech, Blacksburg, Virginia 24061, United States
- Department
of Sustainable Biomaterials, Virginia Tech, Blacksburg, Virginia 24061, United States
| |
Collapse
|
6
|
Chen Y, Huang C, Miao Z, Gao Y, Dong Y, Tam KC, Yu HY. Tailoring Hydronium ion Driven Dissociation-Chemical Cross-Linking for Superfast One-Pot Cellulose Dissolution and Derivatization to Build Robust Cellulose Films. ACS NANO 2024; 18:8754-8767. [PMID: 38456442 DOI: 10.1021/acsnano.3c11335] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 03/09/2024]
Abstract
Concepts of sustainability must be developed to overcome the increasing environmental hazards caused by fossil resources. Cellulose derivatives with excellent properties are promising biobased alternatives for petroleum-derived materials. However, a one-pot route to achieve cellulose dissolution and derivatization is very challenging, requiring harsh conditions, high energy consumption, and complex solubilizing. Herein, we design a one-pot tailoring hydronium ion driven dissociation-chemical cross-linking strategy to achieve superfast cellulose dissolution and derivatization for orderly robust cellulose films. In this strategy, there is a powerful driving force from organic acid with a pKa below 3.75 to dissociate H+ and trigger the dissolution and derivatization of cellulose under the addition of H2SO4. Nevertheless, the driving force can only trigger a partial swelling of cellulose but without dissolution when the pKa of organic acid is above 4.26 for the dissociation of H+ is inhibited by the addition of inorganic acid. The cellulose film has high transmittance (up to ∼90%), excellent tensile strength (∼122 MPa), and is superior to commercial PE film. Moreover, the tensile strength is increased by 400% compared to cellulose film prepared by the ZnCl2 solvent. This work provides an efficient solvent, which is of great significance for emerging cellulose materials from renewable materials.
Collapse
Affiliation(s)
- Yi Chen
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, Hangzhou 310018, China
| | - Chengling Huang
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, Hangzhou 310018, China
| | - Zhouyu Miao
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, Hangzhou 310018, China
| | - Youjie Gao
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, Hangzhou 310018, China
| | - Yanjuan Dong
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, Hangzhou 310018, China
| | - Kam Chiu Tam
- Department of Chemical Engineering, Waterloo Institute for Nanotechnology, University of Waterloo, 200 University Avenue West, Waterloo, Ontario N2L 3G1, Canada
| | - Hou-Yong Yu
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, Hangzhou 310018, China
- Department of Chemical Engineering, Waterloo Institute for Nanotechnology, University of Waterloo, 200 University Avenue West, Waterloo, Ontario N2L 3G1, Canada
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Donghua University, Shanghai 201620, China
| |
Collapse
|
7
|
Rader C, Fritz PW, Ashirov T, Coskun A, Weder C. One-Component Nanocomposites Made from Diblock Copolymer Grafted Cellulose Nanocrystals. Biomacromolecules 2024; 25:1637-1648. [PMID: 38381566 PMCID: PMC10934803 DOI: 10.1021/acs.biomac.3c01196] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/01/2023] [Revised: 01/31/2024] [Accepted: 02/05/2024] [Indexed: 02/23/2024]
Abstract
Cellulose nanocrystals (CNCs) are bio-based, rod-like, high-aspect-ratio nanoparticles with high stiffness and strength and are widely used as a reinforcing nanofiller in polymer nanocomposites. However, due to hydrogen-bond formation between the large number of hydroxyl groups on their surface, CNCs are prone to aggregate, especially in nonpolar polymer matrices. One possibility to overcome this problem is to graft polymers from the CNCs' surfaces and to process the resulting "hairy nanoparticles" (HNPs) into one-component nanocomposites (OCNs) in which the polymer matrix and CNC filler are covalently connected. Here, we report OCNs based on HNPs that were synthesized by grafting gradient diblock copolymers onto CNCs via surface-initiated atom transfer radical polymerization. The inner block (toward the CNCs) is composed of poly(methyl acrylate) (PMA), and the outer block comprises a gradient copolymer rich in poly(methyl methacrylate) (PMMA). The OCNs based on such HNPs microphase separate into a rubbery poly(methyl acrylate) phase that dissipates mechanical energy and imparts toughness, a glassy PMMA phase that provides strength and stiffness, and well-dispersed CNCs that further reinforce the materials. This design afforded OCNs that display a considerably higher stiffness and strength than reference diblock copolymers without the CNCs. At the same time, the extensibility remains high and the toughness is increased up to 5-fold relative to the reference materials.
Collapse
Affiliation(s)
- Chris Rader
- Adolphe
Merkle Institute, University of Fribourg, Chemin des Verdiers 4, 1700 Fribourg, Switzerland
| | - Patrick W. Fritz
- Department
of Chemistry, University of Fribourg, Chemin de Musee 9, 1700 Fribourg, Switzerland
| | - Timur Ashirov
- Department
of Chemistry, University of Fribourg, Chemin de Musee 9, 1700 Fribourg, Switzerland
| | - Ali Coskun
- Department
of Chemistry, University of Fribourg, Chemin de Musee 9, 1700 Fribourg, Switzerland
| | - Christoph Weder
- Adolphe
Merkle Institute, University of Fribourg, Chemin des Verdiers 4, 1700 Fribourg, Switzerland
| |
Collapse
|
8
|
Rader C, Fritz PW, Ashirov T, Coskun A, Weder C. One-Component Nanocomposites Made from Diblock Copolymer Grafted Cellulose Nanocrystals. Biomacromolecules 2024; 25:1637-1648. [DOI: https:/doi.org/10.1021/acs.biomac.3c01196] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 07/03/2024]
Affiliation(s)
- Chris Rader
- Adolphe Merkle Institute, University of Fribourg, Chemin des Verdiers 4, 1700 Fribourg, Switzerland
| | - Patrick W. Fritz
- Department of Chemistry, University of Fribourg, Chemin de Musee 9, 1700 Fribourg, Switzerland
| | - Timur Ashirov
- Department of Chemistry, University of Fribourg, Chemin de Musee 9, 1700 Fribourg, Switzerland
| | - Ali Coskun
- Department of Chemistry, University of Fribourg, Chemin de Musee 9, 1700 Fribourg, Switzerland
| | - Christoph Weder
- Adolphe Merkle Institute, University of Fribourg, Chemin des Verdiers 4, 1700 Fribourg, Switzerland
| |
Collapse
|
9
|
Lima PHCD, Ribeiro-Viana RM, Plath AMS, Grillo R. Lignocellulosic-biomolecules conjugated systems: green-engineered complexes modified by covalent linkers. J Mater Chem B 2024; 12:2471-2480. [PMID: 38345783 DOI: 10.1039/d3tb02581k] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/07/2024]
Abstract
Lignocellulosic biomass represents an abundant and eco-friendly material widely explored in recent years. The main lignocellulosic fractions include cellulose, hemicellulose, and lignin. Nonetheless, the heterogeneity and complexity of these components pose challenges in achieving the desired properties. Conversely, their attractive functional groups can covalently link with other biomolecules, facilitating the creation and enhancement of material properties. Lignocellulosic molecules can form different linkages with other biomolecules through classic and modern methods. Bioconjugation has emerged as a suitable alternative to create new nuances, empowering the linkage between lignocellulosic materials and biomolecules through linkers. These conjugates (lignocellulosic-linkers-biomolecules) attract attention from stakeholders in medicine, chemistry, biology, and agriculture. The plural formations of these biocomplexes highlight the significance of these arrangements. Therefore, this review provides an overview of the progress of lignocellulosic-biomolecule complexes and discusses different types of covalent bioconjugated systems, considering the formation of linkers, applicability, toxicity, and future challenges.
Collapse
Affiliation(s)
- Pedro Henrique Correia de Lima
- São Paulo State University (UNESP), Department of Physics and Chemistry, School of Engineering, Ilha Solteira, SP 15385-000, Brazil.
| | - Renato Márcio Ribeiro-Viana
- Departamento Acadêmico de Química, Universidade Tecnológica Federal do Paraná, UTFPR-Ld, CEP 86036-370, Londrina, PR, Brazil
| | | | - Renato Grillo
- São Paulo State University (UNESP), Department of Physics and Chemistry, School of Engineering, Ilha Solteira, SP 15385-000, Brazil.
| |
Collapse
|
10
|
Rueckel M, Janson S, Solbak A, Fickler A. Spatial activity mapping of ß-mannanase on soybean seeds. Sci Rep 2024; 14:1037. [PMID: 38200142 PMCID: PMC10781726 DOI: 10.1038/s41598-024-51494-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/12/2023] [Accepted: 01/05/2024] [Indexed: 01/12/2024] Open
Abstract
For farm animals the supplementation of exogenous enzymes, like ß-mannanase, to soybean-based diets is beneficial to improve feed digestibility. In order to unravel the effect of ß-mannanase on soybean meal's cell structure, a novel imaging concept was developed which allows visualizing the spatial activity pattern of ß-mannanase with high sensitivity by fluorescence microscopy before any visible degradation of the cellular structure occurs. It is based on fluorescence labeling of newly formed reducing ends of ß-mannanase-hydrolyzed polysaccharides after the native reducing ends of all polysaccharides present were chemically reduced. It was revealed that ß-mannanase is not only active at the cell wall but also at previously unknown sites, like the middle lamella and, most prominently, at an intracellular matrix enclosing the protein storage vacuoles. Based on these findings it can be hypothesized that the evaluated ß-mannanase can degrade the enclosing matrix of encapsulated proteins and the cell wall structure and thereby improves efficiency of feed utilization.
Collapse
Affiliation(s)
- Markus Rueckel
- BASF SE, Carl-Bosch-Straße 38, 67056, Ludwigshafen, Germany.
| | - Sven Janson
- BASF SE, Carl-Bosch-Straße 38, 67056, Ludwigshafen, Germany
| | - Arne Solbak
- BASF Enzymes LLC, 3550 John Hopkins Court, San Diego, CA, 92121, USA
| | - Anna Fickler
- BASF SE, Carl-Bosch-Straße 38, 67056, Ludwigshafen, Germany
| |
Collapse
|
11
|
Zhu W, Chen M, Jang J, Han M, Moon Y, Kim J, You J, Li S, Park T, Kim J. Amino-functionalized nanocellulose aerogels for the superior adsorption of CO 2 and separation of CO 2/CH 4 mixture gas. Carbohydr Polym 2024; 323:121393. [PMID: 37940286 DOI: 10.1016/j.carbpol.2023.121393] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/27/2023] [Revised: 08/31/2023] [Accepted: 09/12/2023] [Indexed: 11/10/2023]
Abstract
Nanocellulose-based aerogels have been considered as one of the ideal candidates for CO2 capture in practical applications owing to their lightweight and porous properties. Additionally, various adsorbents with amine groups have been widely used as effective CO2 capture and storage strategies. Herein, amino-functionalized aerogels were prepared by sol-gel and freeze-drying methods using two typical nanocelluloses (cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs)) as substrates. In addition, the reaction parameters for grafting and amino functionalization were optimized. The CNC and CNF aerogels could be easily modified by the hydrothermal growth of the amino group, and they exhibited attractive properties in terms of CO2 adsorption, recyclability, thermal stability, hydrophobicity, and CO2/CH4 mixture separation. The amino-functionalized CNF aerogel exhibited superior performance to the CNC aerogel, which was attributed to the increased cross-linking binding sites for hydrogen bonding in the CNF aerogel. The results of this study indicated that amino-functionalized nanocellulose aerogels can be considered a promising biodegradable, sustainable, and environmentally friendly material for CO2 capture and removal of CO2 from CH4.
Collapse
Affiliation(s)
- Wenkai Zhu
- College of Chemistry and Materials Engineering, Zhejiang A&F University, Hangzhou 311300, China; Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Meiling Chen
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Jieun Jang
- Department of Chemical and Biomolecular Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722, Republic of Korea
| | - Minsu Han
- School of Chemical Engineering and Australian Institute for Bioengineering and Nanotechnology (AIBN), The University of Queensland, Brisbane, QLD 4072, Australia
| | - Yeonggyun Moon
- Department of Chemical and Biomolecular Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722, Republic of Korea
| | - Junghwan Kim
- Department of Chemical and Biomolecular Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722, Republic of Korea
| | - Jungmok You
- Department of Plant & Environmental New Resources, Graduate School of Biotechnology, Institute of Life Science and Resources, Kyung Hee University, 1732 Deogyeong-daero, Giheung-gu, Yongin-si, Gyeonggi-do 17104, Republic of Korea
| | - Song Li
- College of Chemistry and Materials Engineering, Zhejiang A&F University, Hangzhou 311300, China.
| | - Teahoon Park
- Carbon Composite Department, Composites Research Division, Korea Institute of Materials Science (KIMS), 797, Changwon-daero, Seongsan-gu, Changwon-si 51508, Gyeongsangnam-do, Republic of Korea.
| | - Jeonghun Kim
- Department of Chemical and Biomolecular Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722, Republic of Korea.
| |
Collapse
|
12
|
Frka-Petesic B, Parton TG, Honorato-Rios C, Narkevicius A, Ballu K, Shen Q, Lu Z, Ogawa Y, Haataja JS, Droguet BE, Parker RM, Vignolini S. Structural Color from Cellulose Nanocrystals or Chitin Nanocrystals: Self-Assembly, Optics, and Applications. Chem Rev 2023; 123:12595-12756. [PMID: 38011110 PMCID: PMC10729353 DOI: 10.1021/acs.chemrev.2c00836] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/29/2022] [Indexed: 11/29/2023]
Abstract
Widespread concerns over the impact of human activity on the environment have resulted in a desire to replace artificial functional materials with naturally derived alternatives. As such, polysaccharides are drawing increasing attention due to offering a renewable, biodegradable, and biocompatible feedstock for functional nanomaterials. In particular, nanocrystals of cellulose and chitin have emerged as versatile and sustainable building blocks for diverse applications, ranging from mechanical reinforcement to structural coloration. Much of this interest arises from the tendency of these colloidally stable nanoparticles to self-organize in water into a lyotropic cholesteric liquid crystal, which can be readily manipulated in terms of its periodicity, structure, and geometry. Importantly, this helicoidal ordering can be retained into the solid-state, offering an accessible route to complex nanostructured films, coatings, and particles. In this review, the process of forming iridescent, structurally colored films from suspensions of cellulose nanocrystals (CNCs) is summarized and the mechanisms underlying the chemical and physical phenomena at each stage in the process explored. Analogy is then drawn with chitin nanocrystals (ChNCs), allowing for key differences to be critically assessed and strategies toward structural coloration to be presented. Importantly, the progress toward translating this technology from academia to industry is summarized, with unresolved scientific and technical questions put forward as challenges to the community.
Collapse
Affiliation(s)
- Bruno Frka-Petesic
- Yusuf
Hamied Department of Chemistry, University
of Cambridge, Lensfield Road, Cambridge CB2 1EW, United Kingdom
- International
Institute for Sustainability with Knotted Chiral Meta Matter (WPI-SKCM), Hiroshima University, 1-3-1 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8526, Japan
| | - Thomas G. Parton
- Yusuf
Hamied Department of Chemistry, University
of Cambridge, Lensfield Road, Cambridge CB2 1EW, United Kingdom
| | - Camila Honorato-Rios
- Department
of Sustainable and Bio-inspired Materials, Max Planck Institute of Colloids and Interfaces, Am Mühlenberg 1, 14476 Potsdam, Germany
| | - Aurimas Narkevicius
- B
CUBE − Center for Molecular Bioengineering, Technische Universität Dresden, 01307 Dresden, Germany
| | - Kevin Ballu
- Yusuf
Hamied Department of Chemistry, University
of Cambridge, Lensfield Road, Cambridge CB2 1EW, United Kingdom
| | - Qingchen Shen
- Yusuf
Hamied Department of Chemistry, University
of Cambridge, Lensfield Road, Cambridge CB2 1EW, United Kingdom
| | - Zihao Lu
- Yusuf
Hamied Department of Chemistry, University
of Cambridge, Lensfield Road, Cambridge CB2 1EW, United Kingdom
| | - Yu Ogawa
- CERMAV-CNRS,
CS40700, 38041 Grenoble cedex 9, France
| | - Johannes S. Haataja
- Department
of Applied Physics, Aalto University School
of Science, P.O. Box
15100, Aalto, Espoo FI-00076, Finland
| | - Benjamin E. Droguet
- Yusuf
Hamied Department of Chemistry, University
of Cambridge, Lensfield Road, Cambridge CB2 1EW, United Kingdom
| | - Richard M. Parker
- Yusuf
Hamied Department of Chemistry, University
of Cambridge, Lensfield Road, Cambridge CB2 1EW, United Kingdom
| | - Silvia Vignolini
- Yusuf
Hamied Department of Chemistry, University
of Cambridge, Lensfield Road, Cambridge CB2 1EW, United Kingdom
| |
Collapse
|
13
|
Wu C, Li J, Zhang YQ, Li X, Wang SY, Li DQ. Cellulose Dissolution, Modification, and the Derived Hydrogel: A Review. CHEMSUSCHEM 2023; 16:e202300518. [PMID: 37501498 DOI: 10.1002/cssc.202300518] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/12/2023] [Revised: 07/26/2023] [Accepted: 07/27/2023] [Indexed: 07/29/2023]
Abstract
The cellulose-based hydrogel has occupied a pivotal position in almost all walks of life. However, the native cellulose can not be directly used for preparing hydrogel due to the complex non-covalent interactions. Some literature has discussed the dissolution and modification of cellulose but has yet to address the influence of the pretreatment on the as-prepared hydrogels. Firstly, the "touching" of cellulose by derived and non-derived solvents was introduced, namely, the dissolution of cellulose. Secondly, the "conversion" of functional groups on the cellulose surface by special routes, which is the modification of cellulose. The above-mentioned two parts were intended to explain the changes in physicochemical properties of cellulose by these routes and their influences on the subsequent hydrogel preparation. Finally, the "reinforcement" of cellulose-based hydrogels by physical and chemical techniques was summarized, viz., improving the mechanical properties of cellulose-based hydrogels and the changes in the multi-level structure of the interior of cellulose-based hydrogels.
Collapse
Affiliation(s)
- Chao Wu
- Xinjiang Key Laboratory of Agricultural Chemistry and Biomaterials, College of Chemistry and Chemical Engineering, Xinjiang Agricultural University, Urumchi, 830052, Xinjiang, People's Republic of China
| | - Jun Li
- Xinjiang Key Laboratory of Agricultural Chemistry and Biomaterials, College of Chemistry and Chemical Engineering, Xinjiang Agricultural University, Urumchi, 830052, Xinjiang, People's Republic of China
| | - Yu-Qing Zhang
- Xinjiang Key Laboratory of Agricultural Chemistry and Biomaterials, College of Chemistry and Chemical Engineering, Xinjiang Agricultural University, Urumchi, 830052, Xinjiang, People's Republic of China
| | - Xin Li
- Beijing Key Laboratory of Lignocellulosic Chemistry, Beijing Forestry University, Beijing, 100083, People's Republic of China
| | - Shu-Ya Wang
- School of Bioengineering, Dalian University of Technology, Dalian, 116024, Liaoning, People's Republic of China
| | - De-Qiang Li
- Xinjiang Key Laboratory of Agricultural Chemistry and Biomaterials, College of Chemistry and Chemical Engineering, Xinjiang Agricultural University, Urumchi, 830052, Xinjiang, People's Republic of China
| |
Collapse
|
14
|
Leong MY, Kong YL, Harun MY, Looi CY, Wong WF. Current advances of nanocellulose application in biomedical field. Carbohydr Res 2023; 532:108899. [PMID: 37478689 DOI: 10.1016/j.carres.2023.108899] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/03/2022] [Revised: 07/10/2023] [Accepted: 07/11/2023] [Indexed: 07/23/2023]
Abstract
Nanocellulose (NC) is a natural fiber that can be extracted in fibrils or crystals form from different natural sources, including plants, bacteria, and algae. In recent years, nanocellulose has emerged as a sustainable biomaterial for various medicinal applications including drug delivery systems, wound healing, tissue engineering, and antimicrobial treatment due to its biocompatibility, low cytotoxicity, and exceptional water holding capacity for cell immobilization. Many antimicrobial products can be produced due to the chemical functionality of nanocellulose, such disposable antibacterial smart masks for healthcare use. This article discusses comprehensively three types of nanocellulose: cellulose nanocrystals (CNC), cellulose nanofibrils (CNF), and bacterial nanocellulose (BNC) in view of their structural and functional properties, extraction methods, and the distinctive biomedical applications based on the recently published work. On top of that, the biosafety profile and the future perspectives of nanocellulose-based biomaterials have been further discussed in this review.
Collapse
Affiliation(s)
- M Y Leong
- School of Biosciences, Faculty of Health and Medical Sciences, Taylor's University Lakeside Campus, 47500, Subang Jaya, Selangor Darul Ehsan, Malaysia
| | - Y L Kong
- Department of Engineering and Applied Sciences, American Degree Program, Taylor's University Lakeside Campus, 47500, Subang Jaya, Selangor Darul Ehsan, Malaysia.
| | - M Y Harun
- Department of Chemical and Environmental Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400, UPM Serdang, Selangor Darul Ehsan, Malaysia
| | - C Y Looi
- School of Biosciences, Faculty of Health and Medical Sciences, Taylor's University Lakeside Campus, 47500, Subang Jaya, Selangor Darul Ehsan, Malaysia
| | - W F Wong
- Department of Medical Microbiology, Faculty of Medicine, Universiti Malaya, 50603, Kuala Lumpur, Malaysia
| |
Collapse
|
15
|
Luo Y, Liu Q, He P, Li L, Zhang Z, Li X, Bao G, Wong K, Tanner PA, Jiang L. Responsive Regulation of Energy Transfer in Lanthanide-Doped Nanomaterials Dispersed in Chiral Nematic Structure. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023; 10:e2303235. [PMID: 37505484 PMCID: PMC10520692 DOI: 10.1002/advs.202303235] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/19/2023] [Revised: 06/29/2023] [Indexed: 07/29/2023]
Abstract
The responsive control of energy transfer (ET) plays a key role in the broad applications of lanthanide-doped nanomaterials. Photonic crystals (PCs) are excellent materials for ET regulation. Among the numerous materials that can be used to fabricate PCs, chiral nematic liquid crystals are highly attractive due to their good photoelectric responsiveness and biocompatibility. Here, the mechanisms of ET and the photonic effect of chiral nematic structures on ET are introduced; the regulation methods of chiral nematic structures and the resulting changes in ET of lanthanide-doped nanomaterials are highlighted; and the challenges and promising opportunities for ET in chiral nematic structures are discussed.
Collapse
Affiliation(s)
- Yuxia Luo
- College of Bioresources Chemical and Materials EngineeringShaanxi University of Science and TechnologyXi'anShaanxi710021China
| | - Qingdi Liu
- College of Bioresources Chemical and Materials EngineeringShaanxi University of Science and TechnologyXi'anShaanxi710021China
| | - Ping He
- College of Bioresources Chemical and Materials EngineeringShaanxi University of Science and TechnologyXi'anShaanxi710021China
| | - Liang Li
- School of Life SciencesCentral China Normal UniversityWuhan430079China
| | - Zhao Zhang
- College of Bioresources Chemical and Materials EngineeringShaanxi University of Science and TechnologyXi'anShaanxi710021China
| | - Xinping Li
- College of Bioresources Chemical and Materials EngineeringShaanxi University of Science and TechnologyXi'anShaanxi710021China
| | - Guochen Bao
- Institute for Biomedical Materials and Devices (IBMD)Faculty of ScienceUniversity of Technology SydneySydneyNSW2007Australia
| | - Ka‐Leung Wong
- Department of ChemistryHong Kong Baptist University224 Waterloo RoadKowloonHong Kong SAR999077China
| | - Peter A. Tanner
- Department of ChemistryHong Kong Baptist University224 Waterloo RoadKowloonHong Kong SAR999077China
| | - Lijun Jiang
- School of Life SciencesCentral China Normal UniversityWuhan430079China
| |
Collapse
|
16
|
Zhai Z, Zhou Y, Korovich AG, Hall BA, Yoon HY, Yao Y, Zhang J, Bortner MJ, Roman M, Madsen LA, Edgar KJ. Synthesis and Characterization of Multi-Reducing-End Polysaccharides. Biomacromolecules 2023. [PMID: 37262428 DOI: 10.1021/acs.biomac.3c00104] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
Site-specific modification is a great challenge for polysaccharide scientists. Chemo- and regioselective modification of polysaccharide chains can provide many useful natural-based materials and help us illuminate fundamental structure-property relationships of polysaccharide derivatives. The hemiacetal reducing end of a polysaccharide is in equilibrium with its ring-opened aldehyde form, making it the most uniquely reactive site on the polysaccharide molecule, ideal for regioselective decoration such as imine formation. However, all natural polysaccharides, whether they are branched or not, have only one reducing end per chain, which means that only one aldehyde-reactive substituent can be added. We introduce a new approach to selective functionalization of polysaccharides as an entrée to useful materials, appending multiple reducing ends to each polysaccharide molecule. Herein, we reduce the approach to practice using amide formation. Amine groups on monosaccharides such as glucosamine or galactosamine can react with carboxyl groups of polysaccharides, whether natural uronic acids like alginates, or derivatives with carboxyl-containing substituents such as carboxymethyl cellulose (CMC) or carboxymethyl dextran (CMD). Amide formation is assisted using the coupling agent 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMTMM). By linking the C2 amines of monosaccharides to polysaccharides in this way, a new class of polysaccharide derivatives possessing many reducing ends can be obtained. We refer to this class of derivatives as multi-reducing-end polysaccharides (MREPs). This new family of derivatives creates the potential for designing polysaccharide-based materials with many potential applications, including in hydrogels, block copolymers, prodrugs, and as reactive intermediates for other derivatives.
Collapse
Affiliation(s)
- Zhenghao Zhai
- Macromolecules Innovation Institute, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Yang Zhou
- Department of Sustainable Biomaterials, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Andrew G Korovich
- Department of Chemistry, Macromolecules Innovation Institute, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Brady A Hall
- GlycoMIP, Fralin Life Sciences Institute, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Hu Young Yoon
- Macromolecules Innovation Institute, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Yimin Yao
- Department of Chemical Engineering, Macromolecules Innovation Institute, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Junchen Zhang
- Department of Biological Sciences, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Michael J Bortner
- Department of Chemical Engineering, Macromolecules Innovation Institute, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Maren Roman
- Department of Sustainable Biomaterials, Macromolecules Innovation Institute, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Louis A Madsen
- Department of Chemistry, Macromolecules Innovation Institute, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Kevin J Edgar
- Department of Sustainable Biomaterials, Macromolecules Innovation Institute, Virginia Tech, Blacksburg, Virginia 24061, United States
| |
Collapse
|
17
|
Fliri L, Heise K, Koso T, Todorov AR, Del Cerro DR, Hietala S, Fiskari J, Kilpeläinen I, Hummel M, King AWT. Solution-state nuclear magnetic resonance spectroscopy of crystalline cellulosic materials using a direct dissolution ionic liquid electrolyte. Nat Protoc 2023:10.1038/s41596-023-00832-9. [PMID: 37237027 DOI: 10.1038/s41596-023-00832-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/05/2022] [Accepted: 03/17/2023] [Indexed: 05/28/2023]
Abstract
Owing to its high sustainable production capacity, cellulose represents a valuable feedstock for the development of more sustainable alternatives to currently used fossil fuel-based materials. Chemical analysis of cellulose remains challenging, and analytical techniques have not advanced as fast as the development of the proposed materials science applications. Crystalline cellulosic materials are insoluble in most solvents, which restricts direct analytical techniques to lower-resolution solid-state spectroscopy, destructive indirect procedures or to 'old-school' derivatization protocols. While investigating their use for biomass valorization, tetralkylphosphonium ionic liquids (ILs) exhibited advantageous properties for direct solution-state nuclear magnetic resonance (NMR) analysis of crystalline cellulose. After screening and optimization, the IL tetra-n-butylphosphonium acetate [P4444][OAc], diluted with dimethyl sulfoxide-d6, was found to be the most promising partly deuterated solvent system for high-resolution solution-state NMR. The solvent system has been used for the measurement of both 1D and 2D experiments for a wide substrate scope, with excellent spectral quality and signal-to-noise, all with modest collection times. The procedure initially describes the scalable syntheses of an IL, in 24-72 h, of sufficient purity, yielding a stock electrolyte solution. The dissolution of cellulosic materials and preparation of NMR samples is presented, with pretreatment, concentration and dissolution time recommendations for different sample types. Also included is a set of recommended 1D and 2D NMR experiments with parameters optimized for an in-depth structural characterization of cellulosic materials. The time required for full characterization varies between a few hours and several days.
Collapse
Affiliation(s)
- Lukas Fliri
- Department of Bioproducts and Biosystems, Aalto University, Espoo, Finland
| | - Katja Heise
- Department of Bioproducts and Biosystems, Aalto University, Espoo, Finland
| | - Tetyana Koso
- Materials Chemistry Division, Department of Chemistry, University of Helsinki, Helsinki, Finland
| | - Aleksandar R Todorov
- Materials Chemistry Division, Department of Chemistry, University of Helsinki, Helsinki, Finland
| | - Daniel Rico Del Cerro
- Materials Chemistry Division, Department of Chemistry, University of Helsinki, Helsinki, Finland
| | - Sami Hietala
- Materials Chemistry Division, Department of Chemistry, University of Helsinki, Helsinki, Finland
| | - Juha Fiskari
- Fibre Science and Communication Network (FSCN), Mid Sweden University, Sundsvall, Sweden
| | - Ilkka Kilpeläinen
- Materials Chemistry Division, Department of Chemistry, University of Helsinki, Helsinki, Finland
| | - Michael Hummel
- Department of Bioproducts and Biosystems, Aalto University, Espoo, Finland.
| | - Alistair W T King
- Materials Chemistry Division, Department of Chemistry, University of Helsinki, Helsinki, Finland.
- VTT Technical Research Centre of Finland Ltd, Espoo, Finland.
| |
Collapse
|
18
|
Solhi L, Guccini V, Heise K, Solala I, Niinivaara E, Xu W, Mihhels K, Kröger M, Meng Z, Wohlert J, Tao H, Cranston ED, Kontturi E. Understanding Nanocellulose-Water Interactions: Turning a Detriment into an Asset. Chem Rev 2023; 123:1925-2015. [PMID: 36724185 PMCID: PMC9999435 DOI: 10.1021/acs.chemrev.2c00611] [Citation(s) in RCA: 41] [Impact Index Per Article: 41.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
Abstract
Modern technology has enabled the isolation of nanocellulose from plant-based fibers, and the current trend focuses on utilizing nanocellulose in a broad range of sustainable materials applications. Water is generally seen as a detrimental component when in contact with nanocellulose-based materials, just like it is harmful for traditional cellulosic materials such as paper or cardboard. However, water is an integral component in plants, and many applications of nanocellulose already accept the presence of water or make use of it. This review gives a comprehensive account of nanocellulose-water interactions and their repercussions in all key areas of contemporary research: fundamental physical chemistry, chemical modification of nanocellulose, materials applications, and analytical methods to map the water interactions and the effect of water on a nanocellulose matrix.
Collapse
Affiliation(s)
- Laleh Solhi
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland
| | - Valentina Guccini
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland
| | - Katja Heise
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland
| | - Iina Solala
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland
| | - Elina Niinivaara
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland.,Department of Wood Science, University of British Columbia, Vancouver, British ColumbiaV6T 1Z4, Canada
| | - Wenyang Xu
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland.,Laboratory of Natural Materials Technology, Åbo Akademi University, TurkuFI-20500, Finland
| | - Karl Mihhels
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland
| | - Marcel Kröger
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland
| | - Zhuojun Meng
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland.,Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou325001, China
| | - Jakob Wohlert
- Wallenberg Wood Science Centre (WWSC), Department of Fibre and Polymer Technology, School of Engineering Sciences in Chemistry, Biotechnology and Health, KTH Royal Institute of Technology, 10044Stockholm, Sweden
| | - Han Tao
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland
| | - Emily D Cranston
- Department of Wood Science, University of British Columbia, Vancouver, British ColumbiaV6T 1Z4, Canada.,Department of Chemical and Biological Engineering, University of British Columbia, Vancouver, British ColumbiaV6T 1Z3, Canada
| | - Eero Kontturi
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland
| |
Collapse
|
19
|
Etale A, Onyianta AJ, Turner SR, Eichhorn SJ. Cellulose: A Review of Water Interactions, Applications in Composites, and Water Treatment. Chem Rev 2023; 123:2016-2048. [PMID: 36622272 PMCID: PMC9999429 DOI: 10.1021/acs.chemrev.2c00477] [Citation(s) in RCA: 66] [Impact Index Per Article: 66.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/10/2023]
Abstract
Cellulose is known to interact well with water, but is insoluble in it. Many polysaccharides such as cellulose are known to have significant hydrogen bond networks joining the molecular chains, and yet they are recalcitrant to aqueous solvents. This review charts the interaction of cellulose with water but with emphasis on the formation of both natural and synthetic fiber composites. Covering studies concerning the interaction of water with wood, the biosynthesis of cellulose in the cell wall, to its dispersion in aqueous suspensions and ultimately in water filtration and fiber-based composite materials this review explores water-cellulose interactions and how they can be exploited for synthetic and natural composites. The suggestion that cellulose is amphiphilic is critically reviewed, with relevance to its processing. Building on this, progress made in using various charged and modified forms of nanocellulose to stabilize oil-water emulsions is addressed. The role of water in the aqueous formation of chiral nematic liquid crystals, and subsequently when dried into composite films is covered. The review will also address the use of cellulose as an aid to water filtration as one area where interactions can be used effectively to prosper human life.
Collapse
Affiliation(s)
- Anita Etale
- Bristol Composites Institute, School of Civil, Aerospace and Mechanical Engineering, University of Bristol, University Walk, BristolBS8 1TR, United Kingdom
| | - Amaka J Onyianta
- Bristol Composites Institute, School of Civil, Aerospace and Mechanical Engineering, University of Bristol, University Walk, BristolBS8 1TR, United Kingdom
| | - Simon R Turner
- School of Biological Science, University of Manchester, Oxford Road, ManchesterM13 9PT, U.K
| | - Stephen J Eichhorn
- Bristol Composites Institute, School of Civil, Aerospace and Mechanical Engineering, University of Bristol, University Walk, BristolBS8 1TR, United Kingdom
| |
Collapse
|
20
|
Luo K, Kim YR. Modulation of the self-assembly kinetics and digestibility of type 3 resistant starch particles by co-crystallization with amino acid. Food Chem 2023; 419:136008. [PMID: 37004367 DOI: 10.1016/j.foodchem.2023.136008] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2022] [Revised: 03/01/2023] [Accepted: 03/20/2023] [Indexed: 04/01/2023]
Abstract
The effect of eight different l-amino acids (L-AA) on type-3 resistant starch particles (rSPs) derived from short chain glucan (SCG) was investigated. The L-AA were categorized based on their charge and polarity. The results reveal that positively charged L-AA, such as lysine and arginine, decreased the nucleation and growth rate of rSPs, while non-charged L-AA have negligible effects. Negatively charged L-AA, such as glutamic acid and aspartic acid, had a significant impact on the morphology and crystallinity of the rSPs, resulting in particle size of around 3 μm and crystallinity of around 35%. This implies that charged L-AA influence the arrangement of SCG double helices in the particles. Furthermore, the complexation of SCG with charged L-AA reduced the level of RS in rSPs, indicating that L-AA could be useful in modulating the physical properties and digestibility of rSPs.
Collapse
Affiliation(s)
- Ke Luo
- College of Food Science and Engineering, Ocean University of China, Qingdao, Shandong Province 266003, China; Institute of Life Science and Resources & Department of Food Science and Biotechnology, Kyung Hee University, Yongin 17104, South Korea
| | - Young-Rok Kim
- Institute of Life Science and Resources & Department of Food Science and Biotechnology, Kyung Hee University, Yongin 17104, South Korea.
| |
Collapse
|
21
|
Johns MA, Abu-Namous J, Zhao H, Gattrell M, Lockhart J, Cranston ED. Autofluorescence spectroscopy for quantitative analysis of cellulose nanocrystals. NANOSCALE 2022; 14:16883-16892. [PMID: 36315248 DOI: 10.1039/d2nr04823j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
The ability to determine the physicochemical properties of nanoparticles, such as cellulose nanocrystals, in suspension is critically important to maximize their potential. Currently, various techniques are required to ascertain different properties, which results in a laborious analysis procedure. Here, autofluorescence arising from the cluster-triggered emission (CTE) photoluminescence mechanism is utilized as an analytical spectroscopic tool to determine multiple properties from one data acquisition sequence. This study confirms that key properties - including the nanoparticle concentration in suspension, the critical concentration for liquid crystal formation, and the surface charge content - can be obtained simultaneously. Measured values are accurate to within 10% of conventional techniques with average residual errors of 0.4 wt% for the critical concentration, and 11 mmol kg-1 CNC for the surface charge content. This charge-coupled device (CCD) sensor-based methodology is rapid and does not require the addition of further chemicals. These results support the theory behind CTE and represent a new opportunity for quantitatively analysing non-aromatic, heteroatom-containing nanoparticles in flow based on understanding their inter- and intra-particle interactions.
Collapse
Affiliation(s)
- Marcus A Johns
- Department of Wood Science, The University of British Columbia, 2424 Main Mall, Vancouver, BC, Canada V6T 1Z4.
| | - Jude Abu-Namous
- Department of Chemical and Biological Engineering, The University of British Columbia, 2360 East Mall, Vancouver, BC, Canada V6T 1Z3
| | - Hongying Zhao
- BC Research Inc., 12920 Mitchell Road, Richmond, BC, Canada V6V 1M8
| | - Michael Gattrell
- BC Research Inc., 12920 Mitchell Road, Richmond, BC, Canada V6V 1M8
| | - James Lockhart
- BC Research Inc., 12920 Mitchell Road, Richmond, BC, Canada V6V 1M8
| | - Emily D Cranston
- Department of Wood Science, The University of British Columbia, 2424 Main Mall, Vancouver, BC, Canada V6T 1Z4.
- Department of Chemical and Biological Engineering, The University of British Columbia, 2360 East Mall, Vancouver, BC, Canada V6T 1Z3
- UBC BioProducts Institute, 2385 East Mall, Vancouver, British Columbia, Canada V6T 1Z4
| |
Collapse
|
22
|
Heise K, Koso T, King AWT, Nypelö T, Penttilä P, Tardy BL, Beaumont M. Spatioselective surface chemistry for the production of functional and chemically anisotropic nanocellulose colloids. JOURNAL OF MATERIALS CHEMISTRY. A 2022; 10:23413-23432. [PMID: 36438677 PMCID: PMC9664451 DOI: 10.1039/d2ta05277f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/01/2022] [Accepted: 09/27/2022] [Indexed: 06/16/2023]
Abstract
Maximizing the benefits of nanomaterials from biomass requires unique considerations associated with their native chemical and physical structure. Both cellulose nanofibrils and nanocrystals are extracted from cellulose fibers via a top-down approach and have significantly advanced materials chemistry and set new benchmarks in the last decade. One major challenge has been to prepare defined and selectively modified nanocelluloses, which would, e.g., allow optimal particle interactions and thereby further improve the properties of processed materials. At the molecular and crystallite level, the surface of nanocelluloses offers an alternating chemical structure and functional groups of different reactivity, enabling straightforward avenues towards chemically anisotropic and molecularly patterned nanoparticles via spatioselective chemical modification. In this review, we will explain the influence and role of the multiscale hierarchy of cellulose fibers in chemical modifications, and critically discuss recent advances in selective surface chemistry of nanocelluloses. Finally, we will demonstrate the potential of those chemically anisotropic nanocelluloses in materials science and discuss challenges and opportunities in this field.
Collapse
Affiliation(s)
- Katja Heise
- Department of Bioproducts and Biosystems, Aalto University P.O. Box 16300 FI-00076 Aalto Espoo Finland
| | - Tetyana Koso
- Materials Chemistry Division, Chemistry Department, University of Helsinki FI-00560 Helsinki Finland
| | - Alistair W T King
- VTT Technical Research Centre of Finland Ltd., Biomaterial Processing and Products 02044 Espoo Finland
| | - Tiina Nypelö
- Chalmers University of Technology 41296 Gothenburg Sweden
- Wallenberg Wood Science Center, Chalmers University of Technology 41296 Gothenburg Sweden
| | - Paavo Penttilä
- Department of Bioproducts and Biosystems, Aalto University P.O. Box 16300 FI-00076 Aalto Espoo Finland
| | - Blaise L Tardy
- Khalifa University, Department of Chemical Engineering Abu Dhabi United Arab Emirates
- Center for Membrane and Advanced Water Technology, Khalifa University Abu Dhabi United Arab Emirates
- Research and Innovation Center on CO2 and Hydrogen, Khalifa University Abu Dhabi United Arab Emirates
| | - Marco Beaumont
- Institute of Chemistry of Renewable Resources, Department of Chemistry, University of Natural Resources and Life Sciences Vienna (BOKU), Konrad-Lorenz-Str. 24 A-3430 Tulln Austria
| |
Collapse
|
23
|
Freezing-induced chemical crosslinking to fabricate nanocellulose-based cryogels for efficient bilirubin removal. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.121865] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
|
24
|
Xu Y, Xu Y, Chen H, Gao M, Yue X, Ni Y. Redispersion of dried plant nanocellulose: A review. Carbohydr Polym 2022; 294:119830. [PMID: 35868740 DOI: 10.1016/j.carbpol.2022.119830] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/27/2022] [Revised: 07/01/2022] [Accepted: 07/01/2022] [Indexed: 01/01/2023]
Abstract
Nanocellulose has undergone substantial development as a high value-added cellulose product with broad applications. Dried products are advantageous to decrease transportation costs. However, dried nanocellulose has redispersion challenges when rewetting. In this work, drying techniques, factors affecting redispersibility, and strategies improving the nanocellulose redispersibility are comprehensively reviewed. Hydrogen bonds of nanocellulose are unavoidably developed during drying, leading to inferior redispersibility of dried nanocellulose, even hornification. Drying processes of nanocellulose are discussed first. Then, factors affecting redispersibility are discussed. Following that, strategies improving the nanocellulose redispersibility are analyzed and their advantages and disadvantages are highlighted. Surface charge modification and steric hindrance concept are two main pathways to overcome the redispersion challenge, which are mainly carried out by chemical modification, additive incorporation and non-cellulosic component preservation. Despite several advancements having been achieved, new approaches for enhancing the nanocellulose redispersibility are still required to promote the industrial-scale applications of nanocellulose in various domains.
Collapse
Affiliation(s)
- Yang Xu
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science & Technology, Xi'an, Shaanxi 710021, China; Shaanxi Province Key Lab of Papermaking Technology and Specialty Paper, National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science & Technology, Xi'an, Shaanxi 710021, China
| | - Yongjian Xu
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science & Technology, Xi'an, Shaanxi 710021, China; Shaanxi Province Key Lab of Papermaking Technology and Specialty Paper, National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science & Technology, Xi'an, Shaanxi 710021, China.
| | - Hao Chen
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science & Technology, Xi'an, Shaanxi 710021, China; Shaanxi Province Key Lab of Papermaking Technology and Specialty Paper, National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science & Technology, Xi'an, Shaanxi 710021, China
| | - Minlan Gao
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science & Technology, Xi'an, Shaanxi 710021, China; Shaanxi Province Key Lab of Papermaking Technology and Specialty Paper, National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science & Technology, Xi'an, Shaanxi 710021, China
| | - Xiaopeng Yue
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science & Technology, Xi'an, Shaanxi 710021, China; Shaanxi Province Key Lab of Papermaking Technology and Specialty Paper, National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science & Technology, Xi'an, Shaanxi 710021, China
| | - Yonghao Ni
- Department of Chemical Engineering, University of New Brunswick, Fredericton, New Brunswick E3B 5A3, Canada.
| |
Collapse
|
25
|
Tom M, Thomas S, Seantier B, Grohens Y, Mohamed PK, Haponiuk JT, Kim J. APPROACHING SUSTAINABILITY: NANOCELLULOSE REINFORCED ELASTOMERS—A REVIEW. RUBBER CHEMISTRY AND TECHNOLOGY 2022. [DOI: 10.5254/rct.22.77013] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
Abstract
ABSTRACT
Awareness of the environmental implications of conventional reinforcing fillers and the urge to reduce the carbon footprint have lead researchers to focus more on natural and sustainable materials. Nanocellulose from multitudinous sources finds use in elastomer engineering because of its distinctive properties, such as renewability, sustainability, abundance, biodegradability, high aspect ratio, excellent mechanical properties, and low cost. Green alternatives for conventional fillers in elastomer reinforcing have gained considerable interest to curb the risk of fillers from nonrenewable sources. The differences in properties of nanocellulose and elastomers render attractiveness in the search for synergistic properties resulting from their combination. This review addresses the isolation techniques for nanocellulose and challenges in its incorporation into the elastomer matrix. Surface modifications for solving incompatibility between filler and matrices are discussed. Processing of nanocomposites, various characterization techniques, mechanical behavior, and potential applications of nanocellulose elastomer composites are also discussed in detail.
Collapse
Affiliation(s)
- Milanta Tom
- 1 School of Energy Materials, Mahatma Gandhi University, Kottayam, Kerala, India 686560
- 2 Université Bretagne Sud, UMR CNRS 6027, IRDL, 56100 Lorient, France
| | - Sabu Thomas
- 1 School of Energy Materials, Mahatma Gandhi University, Kottayam, Kerala, India 686560
- 3 Department of Chemical Sciences, University of Johannesburg, Johannesburg, South Africa 17011
| | - Bastien Seantier
- 2 Université Bretagne Sud, UMR CNRS 6027, IRDL, 56100 Lorient, France
| | - Yves Grohens
- 2 Université Bretagne Sud, UMR CNRS 6027, IRDL, 56100 Lorient, France
| | - P. K. Mohamed
- 4 Global R&D Centre, Asia, Apollo Tyres Ltd., Chennai, Tamil Nadu, India 602105
| | - Józef T. Haponiuk
- 5 Department of Polymer Technology, Gdansk University of Technology, Gdańsk, Poland 80-233
| | - Jaehwan Kim
- 6 Department of Mechanical Engineering, Inha University, Incheon, South Korea 22212
| |
Collapse
|
26
|
Wang Q, Zhou R, Sun J, Liu J, Zhu Q. Naturally Derived Janus Cellulose Nanomaterials: Anisotropic Cellulose Nanomaterial Building Blocks and Their Assembly into Asymmetric Structures. ACS NANO 2022; 16:13468-13491. [PMID: 36075202 DOI: 10.1021/acsnano.2c04883] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Naturally derived cellulose nanomaterials (CNMs) with desirable physicochemical properties have drawn tremendous attention for their versatile applications in a broad range of fields. More recently, Janus amphiphilic cellulose nanomaterial particles with asymmetric structures (i.e., reducing and nonreducing ends and crystalline and amorphous domains) have been in the spotlight, offering a rich and sophisticated toolbox for Janus nanomaterials. With careful surface and interfacial engineering, Janus CNM particles have demonstrated great potential as surface modifiers, emulsifiers, stabilizers, compatibilizers, and dispersants in emulsions, nanocomposites, and suspensions. Naturally derived Janus CNM particles offer a fascinating opportunity for scaling up the production of self-standing Janus CNM membranes. Nevertheless, most Janus CNM membranes to date are constructed by asymmetric fabrication or asymmetric modification without considering the Janus traits of CNM particles. More future research should focus on the self-assembly of Janus CNM particles into bulk self-standing Janus CNM membranes to enable more straightforward and sustainable approaches for Janus membranes. This review explores the fabrication, structure-property relationship, and Janus configuration mechanisms of Janus CNM particles and membranes. Janus CNM membranes are highlighted for their versatile applications in liquid, thermal, and light management. This review also highlights the significant advances and future perspectives in the construction and application of sustainable Janus CNM particles and membranes.
Collapse
Affiliation(s)
- Qianqian Wang
- Biofuels Institute, School of the Environment and Safety Engineering, Jiangsu University, Zhenjiang 212013, People's Republic of China
- State Key Laboratory of Bio-based Materials and Green Papermaking, Qilu University of Technology, Jinan 250353, People's Republic of China
- State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai 200438, People's Republic of China
| | - Rui Zhou
- Biofuels Institute, School of the Environment and Safety Engineering, Jiangsu University, Zhenjiang 212013, People's Republic of China
| | - Jianzhong Sun
- Biofuels Institute, School of the Environment and Safety Engineering, Jiangsu University, Zhenjiang 212013, People's Republic of China
| | - Jun Liu
- Biofuels Institute, School of the Environment and Safety Engineering, Jiangsu University, Zhenjiang 212013, People's Republic of China
| | - Qianqian Zhu
- Biofuels Institute, School of the Environment and Safety Engineering, Jiangsu University, Zhenjiang 212013, People's Republic of China
- State Key Laboratory of Bio-based Materials and Green Papermaking, Qilu University of Technology, Jinan 250353, People's Republic of China
| |
Collapse
|
27
|
Zou R, Li B, Duan W, Lin G, Cui Y. Synthesis of 3-carene-derived nanocellulose/1,3,4-thiadiazole-amide complexes with antifungal activity for plant protection. PEST MANAGEMENT SCIENCE 2022; 78:3277-3286. [PMID: 35484724 DOI: 10.1002/ps.6952] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/21/2021] [Revised: 04/24/2022] [Accepted: 04/28/2022] [Indexed: 06/14/2023]
Abstract
BACKGROUND Nanopesticides have been proved to be a powerful and promising tool to solve the issues in agriculture. The purpose of the present study was to develop ecofriendly nanopesticide systems by the strategy of comprehensive utilization of two natural biomass resources (bagasse and turpentine oil) because of their incomparable advantages. RESULTS In this research, a series of nanocellulose carriers ETOCN-1-ETOCN-4 (ETOCN, esterified TEMPO-oxidized cellulose nanofibers) with different degrees of substitution were prepared and characterized by Fourier-transform infrared (FTIR), X-ray diffraction (XRD) and transmission electron microscopy (TEM). Then, 21 1,3,4-thiadiazole-amide compounds 8a-8u containing gem-dimethylcyclopropane ring were designed, synthesized and characterized. A preliminary bioassay indicated that compound 8i (R = p-Br Ph) exhibited broad-spectrum antifungal activity against the tested fungi. Furthermore, drug-loading complexes 8i/ETOCN-1-8i/ETOCN-4 were fabricated by integration of nanocellulose-based carriers ETOCN-1-ETOCN-4 with bioactive compound 8i, and the drug-loading capacities, microstructures and sustained-releasing performance of these complexes were also investigated. According to the observation of scanning electron microscopy (SEM) images of complex 8i/ETOCN-2, the small-molecule drug and the carrier formed a well-distributed and compact complex, which led to the excellent drug-loading capacity and sustained-releasing performance in the ethanol/water (1:1, v/v) system. CONCLUSIONS Complexes 8i/ETOCN-1-8i/ETOCN-4 deserved further study as the promising candidates for the development of nanopesticides. © 2022 Society of Chemical Industry.
Collapse
Affiliation(s)
- Renxuan Zou
- School of Chemistry and Chemical Engineering, Guangxi University, Nanning, P. R. China
| | - Baoyu Li
- School of Chemistry and Chemical Engineering, Guangxi University, Nanning, P. R. China
| | - Wengui Duan
- School of Chemistry and Chemical Engineering, Guangxi University, Nanning, P. R. China
| | - Guishan Lin
- School of Chemistry and Chemical Engineering, Guangxi University, Nanning, P. R. China
| | - Yucheng Cui
- School of Chemistry and Chemical Engineering, Guangxi University, Nanning, P. R. China
| |
Collapse
|
28
|
Koso T, Beaumont M, Tardy BL, Rico Del Cerro D, Eyley S, Thielemans W, Rojas OJ, Kilpeläinen I, King AWT. Highly regioselective surface acetylation of cellulose and shaped cellulose constructs in the gas-phase. GREEN CHEMISTRY : AN INTERNATIONAL JOURNAL AND GREEN CHEMISTRY RESOURCE : GC 2022; 24:5604-5613. [PMID: 35924208 PMCID: PMC9290444 DOI: 10.1039/d2gc01141g] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/25/2022] [Accepted: 06/20/2022] [Indexed: 06/01/2023]
Abstract
Gas-phase acylation is an attractive and sustainable method for modifying the surface properties of cellulosics. However, little is known concerning the regioselectivity of the chemistry, i.e., which cellulose hydroxyls are preferentially acylated and if acylation can be restricted to the surface, preserving crystallinities/morphologies. Consequently, we reexplore simple gas-phase acetylation of modern-day cellulosic building blocks - cellulose nanocrystals, pulps, dry-jet wet spun (regenerated cellulose) fibres and a nanocellulose-based aerogel. Using advanced analytics, we show that the gas-phase acetylation is highly regioselective for the C6-OH, a finding also supported by DFT-based transition-state modelling on a crystalloid surface. This contrasts with acid- and base-catalysed liquid-phase acetylation methods, highlighting that gas-phase chemistry is much more controllable, yet with similar kinetics, to the uncatalyzed liquid-phase reactions. Furthermore, this method preserves both the native (or regenerated) crystalline structure of the cellulose and the supramolecular morphology of even delicate cellulosic constructs (nanocellulose aerogel exhibiting chiral cholesteric liquid crystalline phases). Due to the soft nature of this chemistry and an ability to finely control the kinetics, yielding highly regioselective low degree of substitution products, we are convinced this method will facilitate the rapid adoption of precisely tailored and biodegradable cellulosic materials.
Collapse
Affiliation(s)
- Tetyana Koso
- Department of Chemistry, University of Helsinki AI Virtasen aukio 1 00560 Helsinki Finland
| | - Marco Beaumont
- Department of Chemistry, Institute of Chemistry for Renewable Resources, University of Natural Resources and Life Sciences Vienna (BOKU) Tulln Austria
- Department of Bioproducts and Biosystems, School of Chemical Engineering, Aalto University Espoo Finland
| | - Blaise L Tardy
- Department of Bioproducts and Biosystems, School of Chemical Engineering, Aalto University Espoo Finland
| | - Daniel Rico Del Cerro
- Department of Chemistry, University of Helsinki AI Virtasen aukio 1 00560 Helsinki Finland
| | - Samuel Eyley
- Sustainable Materials Lab, Department of Chemical Engineering, KU Leuven Campus Kortrijk Etienne Sabbelaan 53 8500 Kortrijk Belgium
| | - Wim Thielemans
- Sustainable Materials Lab, Department of Chemical Engineering, KU Leuven Campus Kortrijk Etienne Sabbelaan 53 8500 Kortrijk Belgium
| | - Orlando J Rojas
- Department of Bioproducts and Biosystems, School of Chemical Engineering, Aalto University Espoo Finland
- Bioproducts Institute, Departments of Chemical and Biological Engineering, Chemistry and Wood Science, University of British Columbia Vancouver BC Canada
| | - Ilkka Kilpeläinen
- Department of Chemistry, University of Helsinki AI Virtasen aukio 1 00560 Helsinki Finland
| | - Alistair W T King
- Department of Chemistry, University of Helsinki AI Virtasen aukio 1 00560 Helsinki Finland
- VTT Technical Research Centre of Finland Ltd Tietotie 4e 02150 Espoo Finland
| |
Collapse
|
29
|
Green Extraction of Cellulose Nanocrystals of Polymorph II from Cynara scolymus L.: Challenge for a “Zero Waste” Economy. CRYSTALS 2022. [DOI: 10.3390/cryst12050672] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
The increase of agri-food wastes by agriculture and industries is one of the main causes of environmental pollution. Here we propose the recycling of Cynara scolymus L. wastes to obtain polymorph II cellulose nanocrystals (CNC). Two different extraction procedures are compared: (i) Soxhlet extraction in an ethanol/toluene mixture, and (ii) water boiling of the agricultural waste. Both procedures were followed by purification of cellulose fibers through bleaching treatments and extraction of cellulose nanocrystals by acid hydrolysis. CNCs have been extensively characterized by FTIR spectroscopy, electrophoretic light scattering measurements, X-ray powder diffraction methods, transmission electron microscopy, and thermogravimetric analyses. Extracted CNC are rod-like-shaped polymorph IIs with a good crystallinity index, and they are characterized by high hydrogen bonding intensity. The ELS measurements on samples from both procedures show good results regarding the stability of the CNC II sol (ζ < −40 ± 5 mV), comparable to that of the CNC polymorph I. Both polymorph II CNCs show better thermal stability, compared to CNC I. The results show that the easy extraction procedure from agricultural Cynara scolymus L. waste can be used to produce high-quality cellulose nanocrystals as a green alternative to the commonly used synthetic route.
Collapse
|
30
|
Das R, Lindström T, Sharma PR, Chi K, Hsiao BS. Nanocellulose for Sustainable Water Purification. Chem Rev 2022; 122:8936-9031. [PMID: 35330990 DOI: 10.1021/acs.chemrev.1c00683] [Citation(s) in RCA: 56] [Impact Index Per Article: 28.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
Abstract
Nanocelluloses (NC) are nature-based sustainable biomaterials, which not only possess cellulosic properties but also have the important hallmarks of nanomaterials, such as large surface area, versatile reactive sites or functionalities, and scaffolding stability to host inorganic nanoparticles. This class of nanomaterials offers new opportunities for a broad spectrum of applications for clean water production that were once thought impractical. This Review covers substantial discussions based on evaluative judgments of the recent literature and technical advancements in the fields of coagulation/flocculation, adsorption, photocatalysis, and membrane filtration for water decontamination through proper understanding of fundamental knowledge of NC, such as purity, crystallinity, surface chemistry and charge, suspension rheology, morphology, mechanical properties, and film stability. To supplement these, discussions on low-cost and scalable NC extraction, new characterizations including solution small-angle X-ray scattering evaluation, and structure-property relationships of NC are also reviewed. Identifying knowledge gaps and drawing perspectives could generate guidance to overcome uncertainties associated with the adaptation of NC-enabled water purification technologies. Furthermore, the topics of simultaneous removal of multipollutants disposal and proper handling of post/spent NC are discussed. We believe NC-enabled remediation nanomaterials can be integrated into a broad range of water treatments, greatly improving the cost-effectiveness and sustainability of water purification.
Collapse
Affiliation(s)
- Rasel Das
- Department of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United States
| | - Tom Lindström
- Department of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United States.,KTH Royal Institute of Technology, Stockholm 100 44, Sweden
| | - Priyanka R Sharma
- Department of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United States
| | - Kai Chi
- Department of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United States
| | - Benjamin S Hsiao
- Department of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United States
| |
Collapse
|
31
|
Chemin M, Moreau C, Cathala B, Villares A. Divergent growth of poly(amidoamine) dendrimer-like branched polymers at the reducing end of cellulose nanocrystals. Carbohydr Polym 2022; 279:119008. [PMID: 34980353 DOI: 10.1016/j.carbpol.2021.119008] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/16/2021] [Revised: 11/25/2021] [Accepted: 12/09/2021] [Indexed: 11/26/2022]
Abstract
This paper presents the growth of dendritic polymers at the reducing ends of cellulose nanocrystals by the "grafting from" approach. We took advantage of the chemically differentiated ends of cellulose nanocrystals to specifically synthesize dendrimers at their reducing end by the divergent approach. We used acid-amine coupling reactions in aqueous media to synthesize the carboxylic acid- or amine-terminated poly(amidoamine) dendrimers. The growth of dendrimer generations was monitored by UV and FTIR spectroscopies, and we successfully introduced up to 4 generations. The dendrimer growth at reducing ends was demonstrated by the nanocrystal adsorption driven by the peripheral amino groups onto gold surfaces. Hence, the results from quartz crystal microbalance with dissipation (QCM-D) pointed to a rather upright orientation of the dendrimer-modified cellulose nanocrystals. As the generation increased, the adsorbed layers appeared to be more flexible, which demonstrated that the functionality at the reducing end can successfully tune the properties of cellulose nanocrystals.
Collapse
|
32
|
Solberg A, Mo IV, Omtvedt LA, Strand BL, Aachmann FL, Schatz C, Christensen BE. Carbohydr Polym Special Issue Invited contribution: Click chemistry for block polysaccharides with dihydrazide and dioxyamine linkers - A review. Carbohydr Polym 2022; 278:118840. [PMID: 34973722 DOI: 10.1016/j.carbpol.2021.118840] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/13/2021] [Revised: 10/26/2021] [Accepted: 10/29/2021] [Indexed: 01/01/2023]
Abstract
Engineered block polysaccharides is a relatively new class of biomacromolecules consisting of chemical assembly of separate block structures at the chain termini. In contrast to conventional, laterally substituted polysaccharide derivatives, the block arrangement allows for much higher preservation of inherent chain properties such as biodegradability and stimuli-responsive self-assembly, while at the same time inducing new macromolecular properties. Abundant, carbon neutral, and even recalcitrant biomass is an excellent source of blocks, opening for numerous new uses of biomass for a wide range of novel biomaterials. Among a limited range of methodologies available for block conjugation, bifunctional linkers allowing for oxyamine and hydrazide 'click' reactions have recently proven useful additions to the repertoire. This article focuses the chemistry and kinetics of these reactions. It also presents some new data with the aim to provide useful protocols and methods for general use towards new block polysaccharides.
Collapse
Affiliation(s)
- Amalie Solberg
- NOBIPOL, Department of Biotechnology and Food Science, NTNU Norwegian University of Science and Technology, Sem Sælands vei 6/8, NO-7491 Trondheim, Norway
| | - Ingrid V Mo
- NOBIPOL, Department of Biotechnology and Food Science, NTNU Norwegian University of Science and Technology, Sem Sælands vei 6/8, NO-7491 Trondheim, Norway
| | - Line Aa Omtvedt
- NOBIPOL, Department of Biotechnology and Food Science, NTNU Norwegian University of Science and Technology, Sem Sælands vei 6/8, NO-7491 Trondheim, Norway
| | - Berit L Strand
- NOBIPOL, Department of Biotechnology and Food Science, NTNU Norwegian University of Science and Technology, Sem Sælands vei 6/8, NO-7491 Trondheim, Norway
| | - Finn L Aachmann
- NOBIPOL, Department of Biotechnology and Food Science, NTNU Norwegian University of Science and Technology, Sem Sælands vei 6/8, NO-7491 Trondheim, Norway
| | - Christophe Schatz
- LCPO, Université de Bordeaux, UMR 5629, ENSCBP, 16, Avenue Pey Berland, 33607 Pessac Cedex, France.
| | - Bjørn E Christensen
- NOBIPOL, Department of Biotechnology and Food Science, NTNU Norwegian University of Science and Technology, Sem Sælands vei 6/8, NO-7491 Trondheim, Norway.
| |
Collapse
|
33
|
Wang Y, Zhao W, Han L, Tam KC. Superhydrophobic surfaces from sustainable colloidal systems. Curr Opin Colloid Interface Sci 2022. [DOI: 10.1016/j.cocis.2021.101534] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
34
|
Wohlhauser S, Rader C, Weder C. Facile Method to Determine the Molecular Weight of Polymer Grafts Grown from Cellulose Nanocrystals. Biomacromolecules 2022; 23:699-707. [PMID: 35029986 DOI: 10.1021/acs.biomac.1c01050] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
One of the main challenges associated with the modification of cellulose nanocrystals (CNCs) with polymers by surface-initiated polymerization is the characterization of the resulting products, notably the molecular weight of the grafts. The solid nature of the (modified) CNC nanoparticles limits the possibility to apply solution-based characterization techniques, and the cleavage of the macromolecules from the surface of the CNCs to enable their characterization using solution-based techniques is intricate. Here, we report that 1H NMR spectroscopy of the supernatant of the heterogeneous reaction mixture can be used to approximate the molecular weight of poly(hexyl methacrylate) grafts grown from the surface of CNCs via surface-initiated atom transfer radical polymerization. This was achieved using 1H NMR spectra to determine the monomer conversion from the change of the relative ratio of monomer and solvent signals in the 1H NMR spectra, which in turn allowed determining the weight of PHMA produced. The number-average molecular weight of the grafted polymer was then estimated by assuming that standard atom transfer radical polymerization kinetics are at play and using the initiator concentration on the CNC surface determined by elemental analysis. The method was validated by comparing the results with the gravimetric data and the data of free polymers that were synthesized with a sacrificial initiator.
Collapse
Affiliation(s)
- Sandra Wohlhauser
- Adolphe Merkle Institute, University of Fribourg, Chemin des Verdiers 4, 1700 Fribourg, Switzerland
| | - Chris Rader
- Adolphe Merkle Institute, University of Fribourg, Chemin des Verdiers 4, 1700 Fribourg, Switzerland
| | - Christoph Weder
- Adolphe Merkle Institute, University of Fribourg, Chemin des Verdiers 4, 1700 Fribourg, Switzerland
| |
Collapse
|
35
|
Gandini A, M. Lacerda T. Monomers and Macromolecular Materials from Renewable Resources: State of the Art and Perspectives. Molecules 2021; 27:159. [PMID: 35011391 PMCID: PMC8746301 DOI: 10.3390/molecules27010159] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2021] [Revised: 12/08/2021] [Accepted: 12/17/2021] [Indexed: 12/13/2022] Open
Abstract
A progressively increasing concern about the environmental impacts of the whole polymer industry has boosted the design of less aggressive technologies that allow for the maximum use of carbon atoms, and reduced dependence on the fossil platform. Progresses related to the former approach are mostly based on the concept of the circular economy, which aims at a thorough use of raw materials, from production to disposal. The latter, however, has been considered a priority nowadays, as short-term biological processes can efficiently provide a myriad of chemicals for the polymer industry. Polymers from renewable resources are widely established in research and technology facilities from all over the world, and a broader consolidation of such materials is expected in a near future. Herein, an up-to-date overview of the most recent and relevant contributions dedicated to the production of monomers and polymers from biomass is presented. We provide some basic issues related to the preparation of polymers from renewable resources to discuss ongoing strategies that can be used to achieve original polymers and systems thereof.
Collapse
Affiliation(s)
- Alessandro Gandini
- Graduate School of Engineering in Paper, Print Media and Biomaterials (Grenoble INP-Pagora), University Grenoble Alpes, LGP2, CEDEX 9, 38402 Saint Martin d’Hères, France
| | - Talita M. Lacerda
- Biotechnology Department, Lorena School of Engineering, University of São Paulo, Lorena CEP 12602-810, SP, Brazil;
| |
Collapse
|
36
|
Shi Z, Li S, Li M, Gan L, Huang J. Surface modification of cellulose nanocrystals towards new materials development. J Appl Polym Sci 2021. [DOI: 10.1002/app.51555] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Zhenxu Shi
- School of Chemistry and Chemical Engineering, and Chongqing Key Laboratory of Soft‐Matter Material Chemistry and Function Manufacturing Southwest University Chongqing China
| | - Shufang Li
- School of Chemistry and Chemical Engineering, and Chongqing Key Laboratory of Soft‐Matter Material Chemistry and Function Manufacturing Southwest University Chongqing China
| | - Mingxia Li
- School of Chemistry and Chemical Engineering, and Chongqing Key Laboratory of Soft‐Matter Material Chemistry and Function Manufacturing Southwest University Chongqing China
| | - Lin Gan
- School of Chemistry and Chemical Engineering, and Chongqing Key Laboratory of Soft‐Matter Material Chemistry and Function Manufacturing Southwest University Chongqing China
| | - Jin Huang
- School of Chemistry and Chemical Engineering, and Chongqing Key Laboratory of Soft‐Matter Material Chemistry and Function Manufacturing Southwest University Chongqing China
- School of Chemistry and Chemical Engineering, and Engineering Research Center of Materials‐Oriented Chemical Engineering of Xinjiang Bintuan Shihezi University Shihezi, Xinjiang China
| |
Collapse
|
37
|
Tardy BL, Mattos BD, Otoni CG, Beaumont M, Majoinen J, Kämäräinen T, Rojas OJ. Deconstruction and Reassembly of Renewable Polymers and Biocolloids into Next Generation Structured Materials. Chem Rev 2021; 121:14088-14188. [PMID: 34415732 PMCID: PMC8630709 DOI: 10.1021/acs.chemrev.0c01333] [Citation(s) in RCA: 65] [Impact Index Per Article: 21.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/30/2020] [Indexed: 12/12/2022]
Abstract
This review considers the most recent developments in supramolecular and supraparticle structures obtained from natural, renewable biopolymers as well as their disassembly and reassembly into engineered materials. We introduce the main interactions that control bottom-up synthesis and top-down design at different length scales, highlighting the promise of natural biopolymers and associated building blocks. The latter have become main actors in the recent surge of the scientific and patent literature related to the subject. Such developments make prominent use of multicomponent and hierarchical polymeric assemblies and structures that contain polysaccharides (cellulose, chitin, and others), polyphenols (lignins, tannins), and proteins (soy, whey, silk, and other proteins). We offer a comprehensive discussion about the interactions that exist in their native architectures (including multicomponent and composite forms), the chemical modification of polysaccharides and their deconstruction into high axial aspect nanofibers and nanorods. We reflect on the availability and suitability of the latter types of building blocks to enable superstructures and colloidal associations. As far as processing, we describe the most relevant transitions, from the solution to the gel state and the routes that can be used to arrive to consolidated materials with prescribed properties. We highlight the implementation of supramolecular and superstructures in different technological fields that exploit the synergies exhibited by renewable polymers and biocolloids integrated in structured materials.
Collapse
Affiliation(s)
- Blaise L. Tardy
- Department
of Bioproducts and Biosystems, School of Chemical Engineering, Aalto University, P.O. Box 16300, FI-00076 Aalto, Finland
| | - Bruno D. Mattos
- Department
of Bioproducts and Biosystems, School of Chemical Engineering, Aalto University, P.O. Box 16300, FI-00076 Aalto, Finland
| | - Caio G. Otoni
- Department
of Physical Chemistry, Institute of Chemistry, University of Campinas, P.O. Box 6154, Campinas, São Paulo 13083-970, Brazil
- Department
of Materials Engineering, Federal University
of São Carlos, Rod. Washington Luís, km 235, São
Carlos, São Paulo 13565-905, Brazil
| | - Marco Beaumont
- School
of Chemistry and Physics, Queensland University
of Technology, 2 George
Street, Brisbane, Queensland 4001, Australia
- Department
of Chemistry, Institute of Chemistry of Renewable Resources, University of Natural Resources and Life Sciences, Vienna, A-3430 Tulln, Austria
| | - Johanna Majoinen
- Department
of Bioproducts and Biosystems, School of Chemical Engineering, Aalto University, P.O. Box 16300, FI-00076 Aalto, Finland
| | - Tero Kämäräinen
- Department
of Bioproducts and Biosystems, School of Chemical Engineering, Aalto University, P.O. Box 16300, FI-00076 Aalto, Finland
| | - Orlando J. Rojas
- Department
of Bioproducts and Biosystems, School of Chemical Engineering, Aalto University, P.O. Box 16300, FI-00076 Aalto, Finland
- Bioproducts
Institute, Department of Chemical and Biological Engineering, Department
of Chemistry and Department of Wood Science, University of British Columbia, 2360 East Mall, Vancouver, British Columbia V6T 1Z4, Canada
| |
Collapse
|
38
|
Liu X, Xiao Y, Zhang Z, You Z, Li J, Ma D, Li B. Recent Progress in
Metal‐Organic
Frameworks@Cellulose Hybrids and Their Applications. CHINESE J CHEM 2021. [DOI: 10.1002/cjoc.202100534] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/07/2023]
Affiliation(s)
- Xiongli Liu
- School of Materials Science and Engineering, National Institute for Advanced Materials, TKL of Metal and Molecule‐Based Material Chemistry Nankai University Tianjin 300350 China
| | - Yun Xiao
- General English Department, College of Foreign Languages Nankai University Tianjin 300071 China
| | - Zhiyuan Zhang
- School of Materials Science and Engineering, National Institute for Advanced Materials, TKL of Metal and Molecule‐Based Material Chemistry Nankai University Tianjin 300350 China
| | - Zifeng You
- School of Materials Science and Engineering, National Institute for Advanced Materials, TKL of Metal and Molecule‐Based Material Chemistry Nankai University Tianjin 300350 China
| | - Jinli Li
- School of Materials Science and Engineering, National Institute for Advanced Materials, TKL of Metal and Molecule‐Based Material Chemistry Nankai University Tianjin 300350 China
| | - Dingxuan Ma
- College of Chemistry and Molecular Engineering, Laboratory of Eco‐chemical Engineering, Ministry of Education Qingdao University of Science and Technology Qingdao 266042 China
| | - Baiyan Li
- School of Materials Science and Engineering, National Institute for Advanced Materials, TKL of Metal and Molecule‐Based Material Chemistry Nankai University Tianjin 300350 China
| |
Collapse
|
39
|
Hynninen V, Patrakka J, Nonappa. Methylcellulose-Cellulose Nanocrystal Composites for Optomechanically Tunable Hydrogels and Fibers. MATERIALS (BASEL, SWITZERLAND) 2021; 14:5137. [PMID: 34576360 PMCID: PMC8465715 DOI: 10.3390/ma14185137] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/29/2021] [Revised: 08/31/2021] [Accepted: 09/01/2021] [Indexed: 12/18/2022]
Abstract
Chemical modification of cellulose offers routes for structurally and functionally diverse biopolymer derivatives for numerous industrial applications. Among cellulose derivatives, cellulose ethers have found extensive use, such as emulsifiers, in food industries and biotechnology. Methylcellulose, one of the simplest cellulose derivatives, has been utilized for biomedical, construction materials and cell culture applications. Its improved water solubility, thermoresponsive gelation, and the ability to act as a matrix for various dopants also offer routes for cellulose-based functional materials. There has been a renewed interest in understanding the structural, mechanical, and optical properties of methylcellulose and its composites. This review focuses on the recent development in optically and mechanically tunable hydrogels derived from methylcellulose and methylcellulose-cellulose nanocrystal composites. We further discuss the application of the gels for preparing highly ductile and strong fibers. Finally, the emerging application of methylcellulose-based fibers as optical fibers and their application potentials are discussed.
Collapse
Affiliation(s)
- Ville Hynninen
- Faculty of Engineering and Natural Sciences, Tampere University, P.O. Box 541, FI-33720 Tampere, Finland;
- Department of Applied Physics, Aalto University, P.O. Box 15100, FI-00076 Espoo, Finland
| | - Jani Patrakka
- Faculty of Engineering and Natural Sciences, Tampere University, P.O. Box 541, FI-33720 Tampere, Finland;
| | - Nonappa
- Faculty of Engineering and Natural Sciences, Tampere University, P.O. Box 541, FI-33720 Tampere, Finland;
| |
Collapse
|
40
|
Zhang J, Zhang X, Tian Y, Zhong T, Liu F. Novel and wet-resilient cellulose nanofiber cryogels with tunable porosity and improved mechanical strength for methyl orange dyes removal. JOURNAL OF HAZARDOUS MATERIALS 2021; 416:125897. [PMID: 34492835 DOI: 10.1016/j.jhazmat.2021.125897] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/20/2021] [Revised: 03/29/2021] [Accepted: 04/12/2021] [Indexed: 06/13/2023]
Abstract
Interconnected macro-porous cryogels with robust and pore-tunable structures have been fabricated using chemically crosslinked microfibrillated cellulose (MFC). Periodate oxidation was initially conducted to introduce aldehyde groups into the MFC surface, followed by the freeze-induced chemical crosslinking via the formation of hemiacetal bonds between aldehyde and hydroxyl at -12 °C. The cryogels with pore-tunable structures and sharply enhanced mechanical strengths were finally achieved by re-assembly of MFCs through soaking in NaIO4 solution. Furthermore, the MFC cryogels were post-crosslinked by polyethyleneimine (PEI), bestowing the cryogels with the capability of adsorbing anionic dyes. The stress of the PEI-MFC cryogel at the 80% strain was determined to be 304.5 kPa, which is the maximum value for the nanocellulose-based cryogels reported so far. Finally, the adsorption performances of PEI-MFC cryogels for methyl orange (MO) were evaluated. Maximum adsorption capacity of 500 mg/g could be obtained by the Langmuir model, outperforming that of previous absorbent materials. Reuse experiments indicated that over 90% of adsorption capacity was retained after 6 cycles. Continuous clean-up experiments demonstrated excellent MO removal abilities of the PEI-MFC cryogel. This study shows that the novel, green strategy to fabricate the robust cryogel extends the practical applications of nanocellulose adsorbents for environmental remediation.
Collapse
Affiliation(s)
- Jinmeng Zhang
- College of Chemistry and Chemical Engineering, Yunnan Normal University, Kunming 650092, China.
| | - Xufeng Zhang
- College of Chemistry and Chemical Engineering, Yunnan Normal University, Kunming 650092, China.
| | - Yiran Tian
- College of Chemistry and Chemical Engineering, Yunnan Normal University, Kunming 650092, China.
| | - Tianyi Zhong
- College of Chemistry and Chemical Engineering, Yunnan Normal University, Kunming 650092, China.
| | - Fengyi Liu
- College of Chemistry and Chemical Engineering, Yunnan Normal University, Kunming 650092, China.
| |
Collapse
|
41
|
Delepierre G, Traeger H, Adamcik J, Cranston ED, Weder C, Zoppe JO. Liquid Crystalline Properties of Symmetric and Asymmetric End-Grafted Cellulose Nanocrystals. Biomacromolecules 2021; 22:3552-3564. [PMID: 34297531 DOI: 10.1021/acs.biomac.1c00644] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
The hydrophilic polymer poly[2-(2-(2-methoxy ethoxy)ethoxy)ethylacrylate] (POEG3A) was grafted onto the reducing end-groups (REGs) of cellulose nanocrystal (CNC) allomorphs, and their liquid crystalline properties were investigated. The REGs on CNCs extracted from cellulose I (CNC-I) are exclusively located at one end of the crystallite, whereas CNCs extracted from cellulose II (CNC-II) feature REGs at both ends of the crystallite, so that grafting from the REGs affords asymmetrically and symmetrically decorated CNCs, respectively. To confirm the REG modification, several complementary analytical techniques were applied. The grafting of POEG3A onto the CNC REGs was evidenced by Fourier transform infrared spectroscopy, atomic force microscopy, and the coil-globule conformational transition of this polymer above 60 °C, i.e., its lower critical solution temperature. Furthermore, we investigated the self-assembly of end-tethered CNC-hybrids into chiral nematic liquid crystalline phases. Above a critical concentration, both end-grafted CNC allomorphs form chiral nematic tactoids. The introduction of POEG3A to CNC-I does not disturb the surface of the CNCs along the rods, allowing the modified CNCs to approach each other and form helicoidal textures. End-grafted CNC-II formed chiral nematic tactoids with a pitch observable by polarized optical microscopy. This is likely due to their increase in hydrodynamic radius or the introduced steric stabilization of the end-grafted polymer.
Collapse
Affiliation(s)
- Gwendoline Delepierre
- Adolphe Merkle Institute, University of Fribourg, Chemin des Verdiers 4, 1700 Fribourg, Switzerland
| | - Hanna Traeger
- Adolphe Merkle Institute, University of Fribourg, Chemin des Verdiers 4, 1700 Fribourg, Switzerland
| | - Jozef Adamcik
- Adolphe Merkle Institute, University of Fribourg, Chemin des Verdiers 4, 1700 Fribourg, Switzerland
| | - Emily D Cranston
- Department of Wood Science, The University of British Columbia, 2424 Main Mall, Vancouver, British Columbia V6T 1Z4, Canada.,Department of Chemical and Biological Engineering, The University of British Columbia, 2360 East Mall, Vancouver, British Columbia V6T 1Z3, Canada
| | - Christoph Weder
- Adolphe Merkle Institute, University of Fribourg, Chemin des Verdiers 4, 1700 Fribourg, Switzerland
| | - Justin O Zoppe
- Department of Materials Science & Engineering, Universitat Politècnica de Catalunya Av. Eduard Maristany 16, 08019 Barcelona, Spain
| |
Collapse
|
42
|
Delepierre G, Heise K, Malinen K, Koso T, Pitkänen L, Cranston ED, Kilpeläinen I, Kostiainen MA, Kontturi E, Weder C, Zoppe JO, King AWT. Challenges in Synthesis and Analysis of Asymmetrically Grafted Cellulose Nanocrystals via Atom Transfer Radical Polymerization. Biomacromolecules 2021; 22:2702-2717. [PMID: 34060815 PMCID: PMC8382247 DOI: 10.1021/acs.biomac.1c00392] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/26/2021] [Revised: 05/17/2021] [Indexed: 11/28/2022]
Abstract
When cellulose nanocrystals (CNCs) are isolated from cellulose microfibrils, the parallel arrangement of the cellulose chains in the crystalline domains is retained so that all reducing end-groups (REGs) point to one crystallite end. This permits the selective chemical modification of one end of the CNCs. In this study, two reaction pathways are compared to selectively attach atom-transfer radical polymerization (ATRP) initiators to the REGs of CNCs, using reductive amination. This modification further enabled the site-specific grafting of the anionic polyelectrolyte poly(sodium 4-styrenesulfonate) (PSS) from the CNCs. Different analytical methods, including colorimetry and solution-state NMR analysis, were combined to confirm the REG-modification with ATRP-initiators and PSS. The achieved grafting yield was low due to either a limited conversion of the CNC REGs or side reactions on the polymerization initiator during the reductive amination. The end-tethered CNCs were easy to redisperse in water after freeze-drying, and the shear birefringence of colloidal suspensions is maintained after this process.
Collapse
Affiliation(s)
- Gwendoline Delepierre
- Adolphe
Merkle Institute, University of Fribourg, Chemin des Verdiers 4, 1700 Fribourg, Switzerland
| | - Katja Heise
- Department
of Bioproducts and Biosystems, Aalto University, P.O. Box 16300, FI-00076, Aalto, Espoo Finland
| | - Kiia Malinen
- Department
of Bioproducts and Biosystems, Aalto University, P.O. Box 16300, FI-00076, Aalto, Espoo Finland
| | - Tetyana Koso
- Materials
Chemistry Division, Chemistry Department, University of Helsinki, A.I. Virtasen aukio 1, FI-00560 Helsinki, Finland
| | - Leena Pitkänen
- Department
of Bioproducts and Biosystems, Aalto University, P.O. Box 16300, FI-00076, Aalto, Espoo Finland
| | - Emily D. Cranston
- Department
of Wood Science, The University of British
Columbia, 2424 Main Mall, Vancouver, British Columbia V6 T 1Z4, Canada
- Department
of Chemical and Biological Engineering, The University of British Columbia, 2360 East Mall, Vancouver, British Columbia V6 T 1Z4, Canada
| | - Ilkka Kilpeläinen
- Materials
Chemistry Division, Chemistry Department, University of Helsinki, A.I. Virtasen aukio 1, FI-00560 Helsinki, Finland
| | - Mauri A. Kostiainen
- Department
of Bioproducts and Biosystems, Aalto University, P.O. Box 16300, FI-00076, Aalto, Espoo Finland
| | - Eero Kontturi
- Department
of Bioproducts and Biosystems, Aalto University, P.O. Box 16300, FI-00076, Aalto, Espoo Finland
| | - Christoph Weder
- Adolphe
Merkle Institute, University of Fribourg, Chemin des Verdiers 4, 1700 Fribourg, Switzerland
| | - Justin O. Zoppe
- Department
of Materials Science and Engineering, Universitat
Politècnica de Catalunya, Av. Eduard Maristany 16, 08019 Barcelona, Spain
| | - Alistair W. T. King
- Materials
Chemistry Division, Chemistry Department, University of Helsinki, A.I. Virtasen aukio 1, FI-00560 Helsinki, Finland
| |
Collapse
|
43
|
Promising grafting strategies on cellulosic backbone through radical polymerization processes – A review. Eur Polym J 2021. [DOI: 10.1016/j.eurpolymj.2021.110448] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
|
44
|
Li MC, Wu Q, Moon RJ, Hubbe MA, Bortner MJ. Rheological Aspects of Cellulose Nanomaterials: Governing Factors and Emerging Applications. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2006052. [PMID: 33870553 DOI: 10.1002/adma.202006052] [Citation(s) in RCA: 73] [Impact Index Per Article: 24.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/04/2020] [Revised: 11/01/2020] [Indexed: 05/20/2023]
Abstract
Cellulose nanomaterials (CNMs), mainly including nanofibrillated cellulose (NFC) and cellulose nanocrystals (CNCs), have attained enormous interest due to their sustainability, biodegradability, biocompatibility, nanoscale dimensions, large surface area, facile modification of surface chemistry, as well as unique optical, mechanical, and rheological performance. One of the most fascinating properties of CNMs is their aqueous suspension rheology, i.e., CNMs helping create viscous suspensions with the formation of percolation networks and chemical interactions (e.g., van der Waals forces, hydrogen bonding, electrostatic attraction/repulsion, and hydrophobic attraction). Under continuous shearing, CNMs in an aqueous suspension can align along the flow direction, producing shear-thinning behavior. At rest, CNM suspensions regain some of their initial structure immediately, allowing rapid recovery of rheological properties. These unique flow features enable CNMs to serve as rheological modifiers in a wide range of fluid-based applications. Herein, the dependence of the rheology of CNM suspensions on test protocols, CNM inherent properties, suspension environments, and postprocessing is systematically described. A critical overview of the recent progress on fluid applications of CNMs as rheology modifiers in some emerging industrial sectors is presented as well. Future perspectives in the field are outlined to guide further research and development in using CNMs as the next generation rheological modifiers.
Collapse
Affiliation(s)
- Mei-Chun Li
- School of Renewable Natural Resources, Louisiana State University AgCenter, Baton Rouge, LA, 70803, USA
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials science and Engineering, Nanjing Forestry University, Nanjing, 210037, P. R. China
| | - Qinglin Wu
- School of Renewable Natural Resources, Louisiana State University AgCenter, Baton Rouge, LA, 70803, USA
| | - Robert J Moon
- Forest Products Laboratory, USDA Forest Service, Madison, WI, 53726, USA
| | - Martin A Hubbe
- Department of Forest Biomaterials, North Carolina State University, Raleigh, NC, 27695-8005, USA
| | - Michael J Bortner
- Department of Chemical Engineering, Virginia Polytechnic Institute and State University (Virginia Tech), Blacksburg, VA, 24061, USA
| |
Collapse
|
45
|
Imlimthan S, Khng YC, Keinänen O, Zhang W, Airaksinen AJ, Kostiainen MA, Zeglis BM, Santos HA, Sarparanta M. A Theranostic Cellulose Nanocrystal-Based Drug Delivery System with Enhanced Retention in Pulmonary Metastasis of Melanoma. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2007705. [PMID: 33738957 PMCID: PMC8175021 DOI: 10.1002/smll.202007705] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/07/2020] [Revised: 01/21/2021] [Indexed: 06/12/2023]
Abstract
Metastatic melanoma can be difficult to detect until at the advanced state that decreases the survival rate of patients. Several FDA-approved BRAF inhibitors have been used for treatment of metastatic melanoma, but overall therapeutic efficacy has been limited. Lutetium-177 (177 Lu) enables simultaneous tracking of tracer accumulation with single-photon emission computed tomography and radiotherapy. Therefore, the codelivery of 177 Lu alongside chemotherapeutic agents using nanoparticles (NPs) might improve the therapeutic outcome in metastatic melanoma. Cellulose nanocrystals (CNC NPs) can particularly deliver payloads to lung capillaries in vivo. Herein, 177 Lu-labeled CNC NPs loaded with vemurafenib ([177 Lu]Lu-CNC-V NPs) is developed and the therapeutic effect in BRAF V600E mutation-harboring YUMM1.G1 murine model of lung metastatic melanoma is investigated. The [177 Lu]Lu-CNC-V NPs demonstrate favorable radiolabel stability, drug release profile, cellular uptake, and cell growth inhibition in vitro. In vivo biodistribution reveals significant retention of the [177 Lu]Lu-CNC-V NPs in the lung, liver, and spleen. Ultimately, the median survival time of animals is doubly increased after treatment with [177 Lu]Lu-CNC-V NPs compared to control groups. The enhanced therapeutic efficacy of [177 Lu]Lu-CNC-V NPs in the lung metastatic melanoma animal model provides convincing evidence for the potential of clinical translation for theranostic CNC NP-based drug delivery systems after intravenous administration.
Collapse
Affiliation(s)
- Surachet Imlimthan
- Department of Chemistry, University of Helsinki, Helsinki, FI-00014, Finland
| | - You Cheng Khng
- Department of Chemistry, University of Helsinki, Helsinki, FI-00014, Finland
| | - Outi Keinänen
- Department of Chemistry, University of Helsinki, Helsinki, FI-00014, Finland
- Department of Chemistry, Hunter College, The City University of New York, New York, NY 10021, USA
- Department of Radiology, Memorial Sloan Kettering Cancer Center, New York, NY 10021, USA
| | - Wenzhong Zhang
- Department of Chemistry, University of Helsinki, Helsinki, FI-00014, Finland
| | - Anu J. Airaksinen
- Department of Chemistry, University of Helsinki, Helsinki, FI-00014, Finland
- Turku PET Centre, Department of Chemistry, University of Turku, FI-20521 Turku, Finland
| | - Mauri A. Kostiainen
- Biohybrid Materials, Department of Bioproducts and Biosystems, Aalto University, FI-00076 Aalto, Finland
| | - Brian M. Zeglis
- Department of Chemistry, Hunter College, The City University of New York, New York, NY 10021, USA
- Department of Radiology, Memorial Sloan Kettering Cancer Center, New York, NY 10021, USA
- Ph.D. Program in Chemistry, Graduate Center of the City University of New York, New York, NY 10016, USA
- Department of Radiology, Weill Cornell Medical College, New York 10021, NY, USA
| | - Hélder A. Santos
- Drug Research Program, Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki, FI-00014 Helsinki, Finland
- Helsinki Institute of Life Science (HiLIFE), FI-00014 Helsinki, Finland
| | - Mirkka Sarparanta
- Department of Chemistry, University of Helsinki, Helsinki, FI-00014, Finland
| |
Collapse
|
46
|
Haniffa MACM, Munawar K, Chee CY, Pramanik S, Halilu A, Illias HA, Rizwan M, Senthilnithy R, Mahanama KRR, Tripathy A, Azman MF. Cellulose supported magnetic nanohybrids: Synthesis, physicomagnetic properties and biomedical applications-A review. Carbohydr Polym 2021; 267:118136. [PMID: 34119125 DOI: 10.1016/j.carbpol.2021.118136] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/30/2020] [Revised: 04/24/2021] [Accepted: 04/27/2021] [Indexed: 12/27/2022]
Abstract
Cellulose and its forms are widely used in biomedical applications due to their biocompatibility, biodegradability and lack of cytotoxicity. It provides ample opportunities for the functionalization of supported magnetic nanohybrids (CSMNs). Because of the abundance of surface hydroxyl groups, they are surface tunable in either homogeneous or heterogeneous solvents and thus act as a substrate or template for the CSMNs' development. The present review emphasizes on the synthesis of various CSMNs, their physicomagnetic properties, and potential applications such as stimuli-responsive drug delivery systems, MRI, enzyme encapsulation, nucleic acid extraction, wound healing and tissue engineering. The impact of CSMNs on cytotoxicity, magnetic hyperthermia, and folate-conjugates is highlighted in particular, based on their structures, cell viability, and stability. Finally, the review also discussed the challenges and prospects of CSMNs' development. This review is expected to provide CSMNs' development roadmap in the context of 21st-century demands for biomedical therapeutics.
Collapse
Affiliation(s)
| | - Khadija Munawar
- Centre of Advanced Manufacturing and Material Processing, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia.
| | - Ching Yern Chee
- Centre of Advanced Manufacturing and Material Processing, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia; Department of Chemical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia.
| | - Sumit Pramanik
- Functional and Biomaterials Engineering Lab, Department of Mechanical Engineering, Faculty of Engineering and Technology, SRM Institute of Science and Technology, Kattankulathur, Kancheepuram, 603203, Chennai, Tamil Nadu, India.
| | - Ahmed Halilu
- Department of Chemical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia
| | - Hazlee Azil Illias
- Centre of Advanced Manufacturing and Material Processing, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia; Department of Electrical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia.
| | - Muhammad Rizwan
- Department of Chemistry, The University of Lahore, Lahore, Pakistan
| | - Rajendram Senthilnithy
- Department of Chemistry, Faculty of Natural Sciences, The Open University of Sri Lanka, 10250 Nawala, Nugegoda, Sri Lanka
| | | | - Ashis Tripathy
- Center for MicroElectroMechanics Systems (CMEMS), University of Minho, Campus de Azurém, 4800-058 Guimarães, Portugal
| | - Mohd Fahmi Azman
- Physics Division, Centre for foundation studies, University of Malaya, 50603 Kuala Lumpur, Malaysia
| |
Collapse
|
47
|
Lin F, Pignon F, Putaux JL, Jean B. Temperature-triggered formation of a cellulose II nanocrystal network through regioselective derivatization. NANOSCALE 2021; 13:6447-6460. [PMID: 33885525 DOI: 10.1039/d0nr08597a] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
The two ends of rodlike cellulose II nanocrystals (CNC-II) were regioselectively functionalized either with gold nanoparticles or thermosensitive polymer chains. In the first case, after the introduction of sulfur atoms at both ends of the rods, CNC-II were labelled using a method based on the in situ nucleation and growth of gold nanoparticles (AuNPs) from soluble derivatives. Transmission electron microscopy (TEM) images showed that such a method resulted in the grafting of one monodisperse AuNP at each extremity of the CNC-II, i.e. to the formation of hybrid dumbbell-shaped objects. No AuNP was detected on the lateral surfaces of the CNC-II and almost all observed CNC-II exhibited this dual labeling. This result confirmed with a good statistics when compared to previous works the possibility to derivatize only the two ends of the CNC-II, thanks to the antiparallel arrangement of cellulose chains in these nanoparticles. In the second case, the localized grafting of temperature-sensitive macromolecules onto the ends of the CNC-II was performed using an oxidation reaction followed by a peptide coupling. This end-specific grafting of thermosensitive chains onto CNC-II enhanced their colloidal stability when the temperature was below the lower critical solution temperature (LCST) of the polymer. Above the LCST, the TEM images revealed the formation of a network extending to tens of microns resulting from end-to-end associations of the derivatized rods through attractive interactions between collapsed polymer chains. Rheology experiments further evidenced a temperature-induced sol-gel transition from a liquid-like (sol) behavior below the LCST to solid-like (gel) behavior above the LCST, in agreement with a change from purely repulsive interactions to interconnections via the hydrophobic collapsed chains. Importantly, all results concurred with a full reversibility of the phenomena upon cooling and reproducibility when samples were subjected to temperature cycles around the LCST. This work reveals that the dual site-specific derivatization of CNC-II can provide symmetric hybrid particles with innovative assembling and macroscopic properties that cannot be obtained through homogeneous chemical modifications.
Collapse
Affiliation(s)
- Fangbo Lin
- Univ. Grenoble Alpes, CNRS, CERMAV, F-38000 Grenoble, France.
| | | | | | | |
Collapse
|
48
|
Lin F, Putaux JL, Jean B. RETRACTED: Optimized reducing-end labeling of cellulose nanocrystals: Implication for the structure of microfibril bundles in plant cell walls. Carbohydr Polym 2021; 257:117618. [PMID: 33541646 DOI: 10.1016/j.carbpol.2021.117618] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/16/2020] [Revised: 01/01/2021] [Accepted: 01/03/2021] [Indexed: 12/12/2022]
Abstract
This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the senior authors of the article; Jean-Luc Putaux and Bruno Jean. There are serious concerns about the reliability of the data presented in this article, which critically affects the main conclusions. Namely, TEM Figs. 3, 6 and 7 show signs of manipulation, such as the presence of repeated fragments and the use of the clone stamp tool applied with some image editing software. The first author of the paper, Fangbo Lin, was contacted regarding this matter but did not respond. The two above mentioned authors apologize for any inconvenience to readers.
Collapse
Affiliation(s)
- Fangbo Lin
- Univ. Grenoble Alpes, CNRS, CERMAV, F-38000, Grenoble, France
| | - Jean-Luc Putaux
- Univ. Grenoble Alpes, CNRS, CERMAV, F-38000, Grenoble, France
| | - Bruno Jean
- Univ. Grenoble Alpes, CNRS, CERMAV, F-38000, Grenoble, France.
| |
Collapse
|
49
|
Water redispersion and cytotoxicity of reducing end-modified cellulose nanocrystals by grafting long-chain poly(ethylene oxide). Int J Biol Macromol 2021; 180:143-151. [PMID: 33676983 DOI: 10.1016/j.ijbiomac.2021.03.010] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/14/2020] [Revised: 02/28/2021] [Accepted: 03/02/2021] [Indexed: 11/24/2022]
Abstract
As an ageless "nano-element" in trees, plants and other cellulose-containing species, cellulose nanocrystal (CNC) has been widely used as a renewable building block in diverse applications. Traditional modification strategy of CNC is based on the reaction with its surface hydroxyl groups, suffering the change of its surface physiochemical properties. In this study, a regio-selective and local modification strategy was performed on the reducing end of CNC with the grafting of long-chain poly(ethylene oxide) (PEO) to produce the end-grafted nanocrystals (CNC-eg-PEO). Based on thiol-ene click reaction, the terminal allyl-PEO was covalently attached on the modified nanocrystal possessing the reactive thiol groups. With the preservation of surface chemistry, the redispsersion stability of CNC-eg-PEO was promoted, attributed to the dual effect of steric stabilization and electrostatic repulsion. Furthermore, the CNC-eg-PEO exhibited the low cytotoxicity to ATCC cell lines HFF and CAL-27, indicating its promising biomedical application.
Collapse
|
50
|
Nucleophilic Displacement Reaction on Tosyl Cellulose by L-Methionine to the Synthesis of Novel Water-Soluble Cellulose Derivative and Its Antibacterial Activity. INT J POLYM SCI 2021. [DOI: 10.1155/2021/6613684] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022] Open
Abstract
A novel ampholytic cellulose derivative, cellulose-L-methionine, has been synthesized by means of an esterification reaction of microcrystalline cellulose with tosyl chloride (p-TsCl) in DMAc/LiCl (8%) at 8°C that was followed by nucleophilic displacement (SN) of the tosyl group by the L-methionine amino acid. The resulting structure of cellulose-L-methionine has been characterized by elemental analysis (CHNSO), Fourier-transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (1H-NMR), and scanning electron microscopy (SEM). The antibacterial activity of the synthesized product was screened against Gram-positive and Gram-negative microbial strains such as Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa, by the agar well diffusion method, and compared with commercial antibiotics such as ampicillin and chloramphenicol. It was found that antibacterial experiment revealed excellent antibacterial activity of the cellulose-methionine with respect to a minimal inhibitory concentration (MIC) reference.
Collapse
|