Molecularly Imprinted Polymer-Based Smart Prodrug Delivery System for Specific Targeting, Prolonged Retention, and Tumor Microenvironment-Triggered Release

pH-sensitive metal-organic framework carrier decorated with chitosan for controlled drug release

Satisfactory chemotherapeutic efficiency depends on improving the insufficient selectivity of chemotherapeutic drugs and decreasing damages to healthy tissues/cells, hence, the reasonable design and construction of drug carriers are of great significance in tumor treatment. Herein, the pH-sensitive MOF carrier was developed via the decoration of 4-formylphenylboronic acid (4-FPBA) for controlled 5'-deoxy-5-fluorocytidine (DFCR) release with selectivity. Besides, chitosan (CS) was introduced as the "gatekeeper" for the prevention of drug leakage. In vitro tests prove the good biocompatibility of the MOF carrier and desired tumor cells killing efficiency. Notably, the designed drug carrier decorated with CS in our work demonstrates a prospective candidate in tumor microenvironment-triggered DFCR release in tumor therapy.

Molecularly Imprinted Polymers for Highly Specific Bioorthogonal Catalysis Inside Cells

Transition metal catalysts (TMCs) mediated bioorthogonal catalysis expand the chemical possibilities within cells. Developing synthetic TMCs tools that emulate the efficiency and specificity of natural metalloenzymes is a rewarding yet challenging endeavor. Here, we highlight the potential of molecularly imprinted enzyme mimics (MIEs) containing a Cu center and specific substrate binding domain, for conducing dimethylpropargyloxycarbonyl (DmProc) cleavage reactions within cells. Our studies reveal that the Cu-MIEs act as highly specific guides, precisely catalyzing target substrates, even in glutathione (GSH)-rich cellular environments. By adapting templates similar to the target substrates, we evolved Cu-MIEs activity to a high level and provided a method to broaden its scope to other unique substrates. This system was applied to a thyroid hormone (T3)-responsive gene switch model, inducing firefly luciferase expression by T3 in cells. This approach verifies that MIEs effectively rescue DmProc-bearing T3 prodrugs and seamlessly integrating themself into cellular biocatalytic networks.

Dual-template magnetic molecularly imprinted polymers for selective extraction and sensitive detection of aflatoxin B1 and benzo(α)pyrene in environmental water and edible oil

The coexistence of multiple contaminates in the environment and food is of growing concern due to their extremely hazard as a well-known class I carcinogen, like aflatoxin B1 (AFB1) and benzo(α)pyrene (BaP). AFB1 and BaP are susceptible to coexistence in environmental water and edible oil, posing a significant potential risk to environmental monitoring and food safety. The remaining challenges in detecting multiple contaminates include unsatisfied sensitivity, insufficient targets selectivity, and interferences in complex matrices. Here, we developed dual-template magnetic molecularly imprinted polymers (DMMIPs) for selective extraction of dual targets in complex matrices from the environment and food. The DMMIPs were fabricated by surface imprinting with vinyl-functionalized Fe3O4 as carrier, 5,7-dimethoxycoumarin and pyrene as dummy templates, and methacrylamide as functional monomer. The DMMIPs showed excellent adsorption ability (12.73-15.80 mg/g), imprinting factors (2.01-2.58), and reusability of three adsorption-desorption cycles for AFB1 and BaP. The adsorption mechanism including hydrogen bond, electrostatic interaction and van der Waals force was confirmed by physical characterization and DFT calculation. Applying DMMIPs in magnetic solid phase extraction (MSPE) followed by high-performance liquid chromatography (HPLC) analysis enabled detection limits of 0.134 μg/L for AFB1 and 0.107 μg/L for BaP. Recovery rates for water and edible oil samples were recorded as 86.2%-110.3% with RSDs of 4.1%-11.9%. This approach demonstrates potential for simultaneous identification and extraction of multiple contaminants in environmental and food.

A dual-capture-system polymer based on imprinted cavities and post-imprinting modification sites with significantly improved affinity and specificity for sialic acid and sialylated glycoprotein

The abnormal expression of N-acetylneuraminic acid (SA) and sialylated glycoproteins in biological fluids are closely associated with various diseases including cancer. However, the low content of SA and the strong interference of complex matrix greatly influence the effective capture of SA in biosamples prior to analysis. Herein, a dual-capture-system strategy based on molecular imprinting and post-imprinting modification (PIM) was proposed to precisely capture SA with improved binding affinity and specificity. After imprinting with SA as template, dynamic imine bonds are introduced by post-imprinting modification, enabling sufficiently high specificity to capture SA through imprinting cavities and the dynamic imine bonds hydrolysis reaction simultaneously. The prepared magnetic PIM polymers (Mag-MIPs-PIM) exhibited significantly high specificity both for SA (IF = 4.24) and sialylated glycoprotein (IFTRF = 3.50). In addition, the feasibility of Mag-MIPs-PIM for practical application was demonstrated by association with HPLC for the determination of SA in human serum, and an LOD of 0.01 × 10-2 g L-1 was obtained. The proposed strategy based on molecular imprinting and PIM provides a new inspiration for the improvement of selectivity of the molecularly imprinted polymers.

Fabrication of highly carboxylated nanofibrous aerogels under mild conditions and their protein adsorption performance

The development of high-performance media for protein adsorption in bio-purification is highly desired, particularly in biological pharmaceuticals. In this study, we demonstrate a simple, versatile and mild strategy to construct a nanofibrous aerogel (NFA)-based adsorption media for protein purification. Pyromellitic dianhydride (PMDA) was selected to in-situ graft onto poly(ethylene-co-vinyl alcohol) (PE-co-PVA) nanofibers in aerogels through liquid phase grafting. The obtained PE-co-PVA/PMDA NFAs (PPNAs) possessed superb underwater elasticity, compression fatigue resistance and shape-memory performance. With an open porous network, abundant adsorption ligands, and surface hydrophilicity, the PPNAs exhibited a significant adsorption capacity of 1019.71 mg/g and a short equilibrium time of 3.0 h, surpassing that of commercial and reported nanofiber-based adsorbents. Additionally, the PPNAs demonstrated good dynamic adsorption performance for protein driven solely by gravity. Furthermore, the PPNAs showed reusability, selectivity, acid and alkaline resistance, and practical potential of extracting lysozyme form egg white solution. The successful scale-up of such aerogel-based adsorbents can open up new way for the development and design of next-generation protein adsorption media for bio-purification applications.

Stimuli-Responsive Molecularly Imprinted Polymers: Mechanism and Applications

Molecularly imprinted polymers (MIPs) are very suitable for extraction, drug delivery systems, and sensors due to their good selective adsorption ability, but the difficulty of eluting templates during synthesis and the limitation of application scenarios put higher demands on MIPs. Stimuli-responsive MIPs (SR-MIPs) can actively respond to changes in external conditions to realize various functions, which provides new ideas for the further development of MIPs. This paper reviews the multiple response modes of MIPs, including the common temperature, pH, photo, magnetic, redox-responsive and rare gas, biomolecule, ion, and solvent-responsive MIPs, and explains the mechanism, composition, and applications of such SR-MIPs. These SR-MIPs and the resulting dual/multiple-responsive MIPs have good selectivity, and controllability, and are very promising for isolation and extraction, targeted drug delivery, and electro-sensor.

Paclitaxel Prodrug Enables Glutathione Depletion to Boost Cancer Treatment

Herein, we constructed a paclitaxel (PTX) prodrug (PA) by conjugating PTX with acrylic acid as a cysteine-depleting agent. The as-synthesized PA can assemble with diacylphosphatidylethanolamine-PEG2000 to form stable nanoparticles (PA NPs). After endocytosis into cells, PA NPs can specifically react with cysteine and trigger release of PTX for chemotherapy. On the other hand, the depletion of cysteine can greatly downregulate the intracellular content of glutathione and lead to oxidative stress outburst-provoking ferroptosis. The released PTX can elicit antitumor immune response by inducing immunogenic cell death, thus promoting dendritic cells maturation and cascaded cytotoxic T lymphocytes activation, which not only produces a robust immunotherapy effect but also synergizes the ferroptosis therapy by inhibiting cysteine transport via the release of interferon-γ in the activated immune system. As a result, PA NPs exhibit favorable in vitro and in vivo antitumor performance with reduced systemic toxicity. Our work highlights the potential of simple molecular design of prodrugs for enhancing the therapeutic efficacy toward malignant cancer.

An acid-activatable fluorouracil prodrug for colorectal cancer synergistic therapy

5-Fluorouracil has demonstrated certain efficiency in patients with colorectal cancer. However, significant side effects of use by injection are common. To address this issue defects, a reengineered 5'-deoxy-5-fluorocytidine (DFCR) based drug delivery system (POACa) is developed as a prominent tumor-selective nano-activator. Investigations demonstrate that the constructed nano-activator exhibits good biocompatibility and high therapeutic efficiency in mice with subcutaneous and orthotopic SW-480 colorectal tumors, as its activity is strictly dependent on the tumor-associated acid environment and thymidine phosphorylase. These strategies diminish the off-target toxicity and improve the specificity and sensitivity of human colorectal cancer cells to 5-Fu, obtaining potent efficiency by the combination of H2O2 mediated oxidative stress, calcium overload and 5-Fu-induced chemotherapy (the combination index is 0.11). Overall, the engineered nano-activator exhibits a high therapeutic index in vitro and in vivo. STATEMENT OF SIGNIFICANCE: In this study, we designed and prepared a pH-responsive polymer to synchronously deliver DFCR (5'-deoxy-5-fluorocytidine, a prodrug of 5-Fu), Ca2+ and H2O2. The constructed nano-activator was denoted as POACa. (1) To address the problem of premature leakage of cargo by physical embedding, our research modified the inactive prodrug DFCR through chemical bonding. (2) The activation of the prepared nano-activator was strictly dependent on the tumor-associated acid environment and thymidine phosphorylase, providing the drug delivery system with inherent safety. (3) A distinctly low combination index value (0.11) of CaO2 and DFCR indicated that POACa has a prominent tumor suppression effect by tumor calcium overload sensitized chemotherapy and H2O2 mediated cytotoxicity.

Design of pH-responsive molecularly imprinted polymer as a carrier for controlled and sustainable capecitabine release

A molecularly imprinting polymer (MIP) carrier with pH-responsivity was designed to construct a drug delivery system (DDS) focusing on controlled and sustainable capecitabine (CAPE) release. The pH-responsive characteristic was achieved by the functionalization of SiO2 substrate with 4-formylphenylboronic acid, accompanied by the introduction of fluorescein isothiocyanate for the visualization of the intracellular localization of the nanocarrier. Experimental results indicated that CAPE was adsorbed onto the drug carrier with satisfactory encapsulation efficiency. The controlled release of CAPE was realized based on the break of borate ester bonds between -B(OH)2 and cis-diols in the weakly acidic environment. Density functional theory computations were conducted to investigate the adsorption/release mechanism. Moreover, in vitro experiments confirmed the good biocompatibility and ideal inhibition efficiency of the developed DDS. The MIP can act as an eligible carrier and exhibits the great potential in practical applications for tumor treatment.

Renin imprinted Poly(methyldopa) for biomarker detection and disease therapy

Conventional molecularly imprinted polymers (MIPs) perform their functions principally depended on their three dimensional (3D) imprinted cavities (recognition sites) of templates. Here, retaining the function of recognition sites resulted from the imprinting of template molecules, the role of functional monomers is explored and expanded. Briefly, a class of dual-functional renin imprinted poly(methyldopa) (RMIP) is prepared, consisting of a drug-type function monomer (methyldopa, clinical high blood pressure drug) and a corresponding disease biomarker (renin, biomarker for high blood pressure disease). To boost target-to-receptor binding ratio and sensitivity, the microstructure of recognition sites is beforehand calculated and designed by Density Functional Theory calculations, and the whole interfacial structure, property and thickness of RMIP film is regulated by adjusting the polymerization techniques. The dual-functional applications of RMIP for biomarker detection and disease therapy in vivo is explored. Such RMIP-based biosensors achieves highly sensitive biomarker detection, where the LODs reaches down to 1.31 × 10-6 and 1.26 × 10-6 ng mL-1 for electrochemical and chemical polymers, respectively, and the application for disease therapy in vivo has been verified where displays the obviously decreased blood pressure values of mice. No acute and long-term toxicity is found from the pathological slices, declaring the promising clinical application potential of such engineered RMIP nanostructure.

Molecularly imprinted polymer-based SERS sensing of transferrin in human serum

Specific detection of glycoproteins such as transferrin (TRF) related to neurological diseases, hepatoma and other diseases always plays an important role in the field of disease diagnosis. We designed an antibody-free immunoassay sensing method based on molecularly imprinted polymers (MIPs) formed by the polymerization of multiple functional monomers for the sensitive and selective detection of TRF in human serum. In the sandwich surface-enhanced Raman spectroscopy (SERS) sensor, the TRF-oriented magnetic MIP nanoparticles (Fe3O4@SiO2-MIPs) served as capture units to specifically recognize TRF and 4-mercaptophenylboronic acid-functionalized gold nanorods (MPBA-Au NRs) served as SERS probes to label the targets. In order to achieve stronger interaction between the recognition cavities of the prepared MIPs and the different amino acid fragments that make up TRF, Fe3O4@SiO2-MIPs were obtained through polycondensation reactions between more silylating reagents, enhancing the specific recognition of the entire TRF protein and achieving high IF. This sensing method exhibited a good linear response to TRF within the TRF concentration range of 0.01 ng mL-1 to 1 mg mL-1 (R2 = 0.9974), and the LOD was 0.00407 ng mL-1 (S/N = 3). The good stability, reproducibility and specificity of the resulting MIP based SERS sensor were demonstrated. The determination of TRF in human serum confirmed the feasibility of the method in practical applications.

Cell-Penetrating Drug Carrier by Molecular Recognition of Sphingomyelin on Plasma Membranes

Plasma membranes not only maintain the intracellular microenvironment through their phospholipid bilayer but also eliminate exogenous compounds outside the cell membranes. Most drugs especially with high polarity are prevented from entering into cells to exert their effects. Therefore, it is of great significance to design effective drug carriers with a penetrating ability toward plasma membranes. In this study, a dual-templated MIP (dt-MIPs) carrier with controllable microstructure and high drug loading capacity was prepared using highly expressed sphingomyelin on the plasma membrane and tenofovir (TFV), a first-line drug for HIV and chronic hepatitis B, as template molecules. The drug release experiments performed in vitro under simulated physiological conditions demonstrated that sustained and stable adsorption of TFV on dt-MIPs was more than 80% over 50 h. By a combination of flow cytometry and confocal microscopy, dt-MIPs were found to have efficient cell permeability. Furthermore, mass-spectrometry-based intracellular pharmacokinetic studies demonstrated that TFV was delivered completely into cells within 30 min with the delivery of dt-MIPs. The study presented above suggested that dt-MIPs are expected to be alternative nanoscale drug carriers for enhanced drug permeability and controlled release.

Multifunctional Self-Signaling nanoMIP and Its Application for a Washing-Free Assay of Human Angiotensin-Converting Enzyme 2

Molecular imprinting techniques have attracted a lot of attention as a potential biomimetic technology, but there are still challenges in protein imprinting. Herein, multifunctional nanosized molecularly imprinted polymers (nanoMIPs) for human angiotensin-converting enzyme 2 (ACE2) were prepared by epitope imprinting of magnetic nanoparticles-anchored peptide (magNP-P) templates, which were further applied to construct a competitive displacement fluorescence assay toward ACE2. A cysteine-flanked dodecapeptide sequence was elaborately selected as an epitope for ACE2, which was immobilized onto the surface of magnetic nanoparticles and served as a magNP-P template for imprinting. During polymerization, fluorescent monomers were introduced to endow fluorescence responsiveness to the prepared self-signaling nanoMIPs. A competitive displacement fluorescence assay based on the nanoMIPs was established and operated in a washing-free manner, yielding a wide range for ACE2 (0.1-6.0 pg/mL) and a low detection limit (0.081 pg/mL). This approach offers a promising avenue in the preparation of nanoMIPs for macromolecule recognition and expands potential application of an MIP in the detection of proteins as well as peptides.

Glycan-Imprinted Nanoparticle as Artificial Neutralizing Antibody for Efficient HIV-1 Recognition and Inhibition

The HIV-1 envelope is a heavily glycosylated class 1 trimeric fusion protein responsible for viral entry into CD4+ immune cells. Developing neutralizing antibodies against the specific envelope glycans is an alternative method for antiviral therapies. This work presents the first-ever development and characterization of artificial neutralizing antibodies using molecular imprinting technology to recognize and bind to the envelope protein of HIV-1. The prepared envelope glycan-imprinted nanoparticles (GINPs) can successfully prevent HIV-1 from infecting target cells by shielding the glycans on the envelope protein. In vitro experiments showed that GINPs have strong affinity toward HIV-1 (Kd = 36.7 ± 2.2 nM) and possess high anti-interference and specificity. GINPs demonstrate broad inhibition activity against both tier 1 and tier 2 HIV-1 strains with a pM-level IC50 and exhibit a significant inhibitory effect on long-term viral replication by more than 95%. The strategy provides a promising method for the inhibition and therapy of HIV-1 infection.

Targeting CD73 with flavonoids inhibits cancer stem cells and increases lymphocyte infiltration in a triple-negative breast cancer mouse model

Introduction

Chemotherapy remains the mainstay treatment for triple-negative breast cancer (TNBC) due to the lack of specific targets. Given a modest response of immune checkpoint inhibitors in TNBC patients, improving immunotherapy is an urgent and crucial task in this field. CD73 has emerged as a novel immunotherapeutic target, given its elevated expression on tumor, stromal, and specific immune cells, and its established role in inhibiting anti-cancer immunity. CD73-generated adenosine suppresses immunity by attenuating tumor-infiltrating T- and NK-cell activation, while amplifying regulatory T cell activation. Chemotherapy often leads to increased CD73 expression and activity, further suppressing anti-tumor immunity. While debulking the tumor mass, chemotherapy also enriches heterogenous cancer stem cells (CSC), potentially leading to tumor relapse. Therefore, drugs targeting both CD73, and CSCs hold promise for enhancing chemotherapy efficacy, overcoming treatment resistance, and improving clinical outcomes. However, safe and effective inhibitors of CD73 have not been developed as of now.

Methods

We used in silico docking to screen compounds that may be repurposed for inhibiting CD73. The efficacy of these compounds was investigated through flow cytometry, RT-qPCR, CD73 activity, cell viability, tumorsphere formation, and other in vitro functional assays. For assessment of clinical translatability, TNBC patient-derived xenograft organotypic cultures were utilized. We also employed the ovalbumin-expressing AT3 TNBC mouse model to evaluate tumor-specific lymphocyte responses.

Results

We identified quercetin and luteolin, currently used as over-the-counter supplements, to have high in silico complementarity with CD73. When quercetin and luteolin were combined with the chemotherapeutic paclitaxel in a triple-drug regimen, we found an effective downregulation in paclitaxel-enhanced CD73 and CSC-promoting pathways YAP and Wnt. We found that CD73 expression was required for the maintenance of CD44highCD24low CSCs, and co-targeting CD73, YAP, and Wnt effectively suppressed the growth of human TNBC cell lines and patient-derived xenograft organotypic cultures. Furthermore, triple-drug combination inhibited paclitaxel-enriched CSCs and simultaneously improved lymphocyte infiltration in syngeneic TNBC mouse tumors.

Discussion

Conclusively, our findings elucidate the significance of CSCs in impairing anti-tumor immunity. The high efficacy of our triple-drug regimen in clinically relevant platforms not only underscores the importance for further mechanistic investigations but also paves the way for potential development of new, safe, and cost-effective therapeutic strategies for TNBC.

Polymer-Drug Conjugates Codeliver a Temozolomide Intermediate and Nitric Oxide for Enhanced Chemotherapy against Glioblastoma Multiforme

Polymer-drug conjugates (PDCs) provide possibilities for the development of multiresponsive drug delivery and release platforms utilized in cancer therapy. The delivery of Temozolomide (TMZ, a DNA methylation agent) by PDCs has been developed to improve TMZ stability under physiological conditions for the treatment of glioblastoma multiforme (GBM); however, with inefficient chemotherapeutic efficacy. In this work, we synthesized an amphiphilic triblock copolymer (P1-SNO) with four pendant functionalities, including (1) a TMZ intermediate (named MTIC) as a prodrug moiety, (2) a disulfide bond as a redox-responsive trigger to cage MTIC, (3) S-nitrosothiol as a light/heat-responsive donor of nitric oxide (NO), and (4) a poly(ethylene glycol) chain to enable self-assembly in aqueous media. P1-SNO was demonstrated to liberate MTIC in the presence of reduced glutathione and release gaseous NO upon exposure to light or heat. The in vitro results revealed a synergistic effect of released MTIC and NO on both TMZ-sensitive and TMZ-resistant GBM cells. The environment-responsive PDC system for codelivery of MTIC and NO is promising to overcome the efficacy issue in TMZ-based cancer therapy.

Miniaturized centrifugation accelerated pipette-tip matrix solid-phase dispersion based on poly(deep eutectic solvents) surface imprinted graphene oxide composite adsorbent for rapid extraction of anti-adipogenesis markers from Solidago decurrens Lour

Overweight and obesity are the causes of many diseases and have become global "epidemics". Research on natural active components with anti-adipogenesis effects in plants has aroused the interest of researchers. One of the most critical problems is establishing sample preparation and analytical techniques for quickly and selectively extracting and determining the active anti-adipogenesis components in complex plant matrices for developing new anti-adipogenic drugs. In this study, a new poly(deep eutectic solvents) surface imprinted graphene oxide composite (PDESs-MIP/GO) with high selectivity for phenolic acids was prepared using deep eutectic solvents as monomers and crosslinkers. A miniaturized centrifugation-accelerated pipette-tip matrix solid-phase dispersion method (CPT-MSPD) with PDESs-MIP/GO as adsorbent, coupled with high-performance liquid chromatography, was further developed for the rapid determination of anti-adipogenesis markers in Solidago decurrens Lour. (SDL). The established method was successfully used to determination anti-adipogenesis markers in SDL from different regions, with the advantages of accuracy (recoveries: 94.4 - 115.9 %, RSDs ≤ 9.8 %), speed (CPT-MSPD time: 11 min), selectivity (imprinting factor: ∼2.0), and economy (2 mg of adsorbent and 1 mL of solvents), which is in line with the current advanced principle of "3S+2A" in analytical chemistry.

Discrimination of cis-diol-containing molecules using fluorescent boronate affinity probes by principal component analysis

Fluorescent boronate affinity molecules have gained increasing attention in the field of fluorescence sensing and detection due to their selective recognition capability towards cis-diol-containing molecules (cis-diols). However, the conventional fluorescent boronate affinity molecules face a challenge in differentiating the type of cis-diol only by their fluorescence responses. In this study, a simple method was used to discriminate different types of cis-diols, including nucleosides, nucleotides, sugars, and glycoproteins based on the phenylboronic acid-functionalized fluorescent molecules combined with principal component analysis (PCA). Both fluorescent molecules were simply synthesized by the covalent interaction between the amino group in 3-aminophenyl boronic acid and the isothiocyanate group in fluorescein or rhodamine B. In view of their fluorescence-responsive behaviors to these cis-diols directly, it is impossible to differentiate their types even under the optimized experimental conditions. When PCA was employed to treat the fluorescence response data and the quenching constants with their molecular weight, different types of cis-diols can be distinguished successfully. As a result, by integrating the fluorescence response of the boronate affinity probes with PCA, it can greatly improve the specific recognition capability of the boronic acids, providing a simple and direct way to distinguish and identify different types of cis-diols.

Remodeling tumor immunosuppression with molecularly imprinted nanoparticles to enhance immunogenic cell death for cancer immunotherapy

Insufficient tumor accumulation and distribution of immunogenic cell death (ICD) inducer as well as low antitumor immunity severely restrict the therapeutic efficacy of tumor immunotherapy. Tumor associated fibroblasts (TAFs) are important in tumor extracellular matrix (ECM) remodeling and immune evasion. Reprogramming tumor immunosuppressive microenvironment via TAFs regulation might present a promising way for enhanced ICD effect and complete tumor elimination. In this study, TAFs derived tryptase imprinted nanoparticles (DMSN@MIPs) are developed to modulate TAFs and improve tumor immunotherapy effect of doxorubicin liposomes (DOX/LIP). Tryptase (TPS), secreted by mast cells, are found to support tumor growth via transcriptionally activating TAFs to an activated state with increased expression of fibroblast activation marker α-smooth muscle actin (α-SMA). DMSN@MIPs canbe used as artificial antibodies, which effectively neutralize TPS, reduce TAFs activation, promote intra-tumor penetration of DOX/LIP and enhance ICD effect induced by DOX/LIP. In addition, the combined administration system remodels immunosuppressive microenvironment, which not only significantly up-regulates immune cells (DC cells, CD8+T cells, NK cells), but also significantly down-regulates immunosuppressive cells (Treg cells, MDSCs cells). Our results support the DMSN@MIPs canbe a promising approach to improve ICD efficacy in cancer immunotherapy.

Chain-extension in hyperbranched polymers alters tissue distribution and cytotoxicity profiles in orthotopic models of triple negative breast cancers

The therapeutic efficacy of nanomedicines is highly dependent on their access to target sites in the body, and this in turn is markedly affected by their size, shape and transport properties in tissue. Although there have been many studies in this area, the ability to design nanomaterials with optimal physicochemical properties for in vivo efficacy remains a significant challenge. In particular, it is often difficult to quantify the detailed effects of cancer drug delivery systems in vivo as tumour volume reduction, a commonly reported marker of efficacy, does not always correlate with cytotoxicity in tumour tissue. Here, we studied the behaviour in vivo of two specific poly(2-hydroxypropyl methacrylamide) (pHPMA) pro-drugs, with hyperbranched and chain-extended branched architectures, redox-responsive backbone components, and pH-sensitive linkers to the anti-cancer drug doxorubicin. Evaluation of the biodistribution of these polymers following systemic injection indicated differences in the circulation time and organ distribution of the two polymers, despite their very similar hydrodynamic radii (∼10 and 15 nm) and architectures. In addition, both polymers showed improved tumour accumulation in orthotopic triple-negative breast cancers in mice, and decreased accumulation in healthy tissue, as compared to free doxorubicin, even though neither polymer-doxorubicin pro-drug decreased overall tumour volume as much as the free drug under the dosing regimens selected. However, the results of histopathological examinations by haematoxylin and eosin, and TUNEL staining indicated a higher population of apoptotic cells in the tumours for both polymer pro-drug treatments, and in turn a lower population of apoptotic cells in the heart, liver and spleen, as compared to free doxorubicin treatment. These data suggest that the penetration of these polymer pro-drugs was enhanced in tumour tissue relative to free doxorubicin, and that the combination of size, architecture, bioresponsive backbone and drug linker degradation yielded greater efficacy for the polymers as measured by biomarkers than that of tumour volume. We suggest therefore that the effects of nanomedicines may be different at various length scales relative to small molecule free drugs, and that penetration into tumour tissue for some nanomedicines may not be as problematic as prior reports have suggested. Furthermore, the data indicate that dual-responsive crosslinked polymer-prodrugs in this study may be effective nanomedicines for breast cancer chemotherapy, and that endpoints beyond tumour volume reduction can be valuable in selecting candidates for pre-clinical trials.

Fabrication and application of molecularly imprinted polymer doped carbon dots coated silica stationary phase

Facing the difficulties in chromatographic separation of polar compounds, this investigation devotes to developing novel stationary phase. Molecularly imprinted polymers (MIPs) have aroused wide attention, owing to their outstanding selectivity, high stability, and low cost. In this work, a novel stationary phase based on carbon dots (CDs), MIP layer, and silica beads was synthesized to exploit high selectivity of MIPs, excellent physicochemical property of CDs, and outstanding chromatographic performances of silica microspheres simultaneously. The MIP doped CDs coated silica (MIP-CDs/SiO₂) stationary phase was systematically characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) surface area measurement, and carbon elemental analysis. Furthermore, the chromatographic performance of the MIP-CDs/SiO₂ column was thoroughly assessed by using a wide variety of compounds (including nucleosides, sulfonamides, benzoic acids, and some other antibiotics). Meanwhile, the separation efficiency of the MIP-CDs/SiO₂ stationary phase was superior to other kinds of stationary phases (e.g. nonimprinted NIP-CDs/SiO₂, MIP/SiO₂, and C18-SiO₂). The results demonstrated that MIP-CDs/SiO₂ column exhibited best performance in terms of chromatographic separation. For all tested compounds, the resolution value was not less than 1.60, and the column efficiency of MIP-CDs/SiO₂ for thymidine was 22,740 plates/m. The results further indicate that the MIP-CDs/SiO₂ column can combine the good properties of MIP, CDs, with those of silica microbeads. Therefore, the developed MIP-CDs/SiO₂ stationary phase can be applied in the separation science and chromatography-based techniques.

Linking peptide-oriented surface imprinting magnetic nanoparticle with carbon nanotube-based fluorescence signal output device for ultrasensitive detection of glycoprotein

Determination of trace glycoprotein has important guiding significance in clinical diagnosis and is usually achieved by immunoaffinity. However, immunoaffinity possesses inherent drawbacks, such as poor probability of high-quality antibodies, instability of biological reagents, and harmfulness of chemical labels to the body. Herein, we propose an innovative method of peptide-oriented surface imprinting to fabricate artificial antibody for recognition of glycoprotein. By integrating peptide-oriented surface imprinting and PEGylation, an innovative hydrophilic peptide-oriented surface imprinting magnetic nanoparticle (HPIMN) was successfully fabricated with human epidermal growth factor receptor-2 (HER2) as a model glycoprotein template. In addition, we further prepared a novel boronic acid-modified/fluorescein isothiocyanate-loaded/polyethylene glycol-covered carbon nanotube (BFPCN) as fluorescence signal output device, which was loaded with numerous fluorescent molecules could specifically label the cis-diol of glycoprotein at physiological pH via boronate-affinity interaction. To prove the practicability, we proposed a HPIMN-BFPCN strategy, in which the HPIMN first selectively captured the HER2 due to the molecular imprinted recognition and then the BFPCN specific labeled the exposed cis-diol of HER2 based on the boronate-affinity reaction. The HPIMN-BFPCN strategy exhibited ultrahigh sensitivity with limit of detection of 14 fg mL^-1 and was successfully used in the determination of HER2 in spiked sample with recovery and relative standard deviation in the range of 99.0%-103.0% and 3.1%-5.6%, respectively. Therefore, we believe that the novel peptide-oriented surface imprinting has great potential to become an universal strategy for fabrication of recognition units for other protein biomarkers, and the synergy sandwich assay could become a powerful tool in prognosis evaluation and clinical diagnosis of glycoprotein-related diseases.

Rational Supramolecular Strategy via Halogen Bonding for Effective Halogen Recognition in Molecular Imprinting

Halogen bonding is a highly directional interaction and a potential tool in functional material design through self-assembly. Herein, we describe two fundamental supramolecular strategies to synthesize molecularly imprinted polymers (MIPs) with halogen bonding-based molecular recognition sites. In the first method, the size of the σ-hole was increased by aromatic fluorine substitution of the template molecule, enhancing the halogen bonding in the supramolecule. The second method involved sandwiching hydrogen atoms of a template molecule between iodo substituents, which suppressed competing hydrogen bonding and enabled multiple recognition patterns, improving the selectivity. The interaction mode between the functional monomer and the templates was elucidated by ¹H NMR, ¹³C NMR, X-ray absorption spectroscopy, and computational simulation. Finally, we succeeded in the effective chromatographic separation of diiodobenzene isomers on the uniformly sized MIPs prepared by multi-step swelling and polymerization. The MIPs selectively recognized halogenated thyroid hormones via halogen bonding and could be applied to screening endocrine disruptors.

Hierarchically Structured Molecularly Imprinted Nanotransducers for Truncated HER2-Targeted Photodynamic Therapy of Therapeutic Antibody-Resistant Breast Cancer

Antibodies have been a mainstream class of therapeutics for clinical treatment of various diseases, especially cancers. However, mutation in cancer cells leads to resistance to therapeutic antibodies, hyperactivity of proliferation of cancer cells, and difficulty in the development of therapeutic antibodies. Herein, we present a strategy termed molecularly imprinted nanotransducer (MINT) for targeted photodynamic therapy (PDT) of mutated cancers. The MINT is a rationally engineered nanocomposite featuring a core of an upconversion nanoparticle, a shell of a thin layer of molecularly imprinted polymer, and a photosensitizer modified on the surface. As a proof-of-principle, truncated HER2 (P95HER2) overexpressed breast cancer, a challenging cancer lacking effective targeted therapeutics, was used as the cancer model. The designed structure, properties, functions, and anticancer efficacy of MINT were systematically investigated and experimentally confirmed. The MINT could not only specifically target P95HER2+ cancer cells in vitro and in vivo but also efficiently transfer the irradiated light and generate excited-state oxygen, resulting in efficient targeted cancer killing. Therefore, the MINT strategy provides a promising therapeutic for targeted PDT of drug-resistant cancers caused by target mutation.

A novel bifunctional molecularly imprinted polymer-based SERS/RRS dimode nanosensor for ultratrace acetamiprid

A new acetamiprid (AP) molecularly imprinted polymer (MIP) nanosol was synthesized with α-methacrylic acid as functional monomer, ethylene glycol dimethacrylate as crosslinker and 2,2'-azobisisobutyronitrile as initiator, under the microwave irradiation. It was characterized by transmission electron microscopy, specific surface area and pore size analysis, and molecular spectroscopy. The bifunctional MIP nanomaterial not only had the recognition of AP but also had a strong catalysis of the nanogold dimode indicator reaction of chloroauric acid-dopamine. The generated gold nanoparticles (AuNPs) had strong surface-enhanced Raman scattering (SERS) and resonance Rayleigh scattering (RRS) effects, and the two kinds of signals enhanced linearly with imprinted molecule AP increasing. Accordingly, a novel SERS/RRS nanosensor platform was constructed to detect 0.25-20 pmol/L and 0.5-50 pmol/L AP by SERS and RRS monitoring respectively. Moreover, a reliable nanocatalytic mechanism was proposed.

Facile synthesis of flower-like sandwich-structured molecularly imprinted polymers for efficient recognition of target protein from egg white

In this work, a facile method for synthesis of flower-like sandwich-structured molecularly imprinted polymers (NiO@PDA/MIPs) was proposed for protein recognition. Polydopamine modified flower-like NiO was used as substrate to immobilize the target protein (ovalbumin, OVA), and dopamine was utilized as functional monomer to form the imprinted layer. The whole preparation process was conducted in aqueous solution at room temperature. The key preparation conditions were studied systematically. Owing to the large surface-to-volume of the flower-like structure and the multifunctional groups on the polydopamine layer, the NiO@PDA/MIPs showed large binding capacity (143.2 mg/g), efficient adsorption kinetics (60 min) and excellent selectivity toward OVA. Meanwhile, the NiO@PDA/MIPs possessed satisfactory stability and reusability. Finally, successful capture of OVA from egg white suggested its potential value in practical applications.

A human VEGF magnetic molecularly imprinted polymer for drug-free anti-angiogenesis and photothermal therapy of tumors

A magnetic molecularly imprinted polymer was developed with an epitope peptide of human VEGF as a template via an epitope blotting technique. As a drug-free agent, the nanoparticles can significantly suppress the proliferation of tumor cells by integrating anti-angiogenesis and photothermotherapy. This work provides a successful example of the design of multimodal antineoplastic drugs.

Molecularly imprinted and cladded polymers for constructing a portable plasmonic immunoassay for peptides in biofluids

Using two molecularly imprinted and cladded polymers (cMIPs), an inexpensive, fast and portable plasmonic immuno-sandwich assay (PISA) was rationally developed for high-specificity and ultra-sensitive detection of C-peptide in urine. The dual cMIPs-based PISA allowed healthy individuals to be distinguished from diabetes patients and exhibited several significant merits over existing immunoassays, holding great promise in clinical diagnosis.

Molecularly Imprinted Nanomaterials with Stimuli Responsiveness for Applications in Biomedicine

The review aims to summarize recent reports of stimuli-responsive nanomaterials based on molecularly imprinted polymers (MIPs) and discuss their applications in biomedicine. In the past few decades, MIPs have been proven to show widespread applications as new molecular recognition materials. The development of stimuli-responsive nanomaterials has successfully endowed MIPs with not only affinity properties comparable to those of natural antibodies but also the ability to respond to external stimuli (stimuli-responsive MIPs). In this review, we will discuss the synthesis of MIPs, the classification of stimuli-responsive MIP nanomaterials (MIP-NMs), their dynamic mechanisms, and their applications in biomedicine, including bioanalysis and diagnosis, biological imaging, drug delivery, disease intervention, and others. This review mainly focuses on studies of smart MIP-NMs with biomedical perspectives after 2015. We believe that this review will be helpful for the further exploration of stimuli-responsive MIP-NMs and contribute to expanding their practical applications especially in biomedicine in the near future.

Sialyl-Tn Antigen-Imprinted Dual Fluorescent Core-Shell Nanoparticles for Ratiometric Sialyl-Tn Antigen Detection and Dual-Color Labeling of Cancer Cells

Sialyl-Tn (STn or sialyl-Thomsen-nouveau) is a carbohydrate antigen expressed by more than 80% of human carcinomas. We here report a strategy for ratiometric STn detection and dual-color cancer cell labeling, particularly, by molecularly imprinted polymers (MIPs). Imprinting was based on spectroscopic studies of a urea-containing green-fluorescent monomer 1 and STn-Thr-Na (sodium salt of Neu5Acα2-6GalNAcα-O-Thr). A few-nanometer-thin green-fluorescent polymer shell, in which STn-Thr-Na was imprinted with 1, other comonomers, and a cross-linker, was synthesized from the surface of red-emissive carbon nanodot (R-CND)-doped silica nanoparticles, resulting in dual fluorescent STn-MIPs. Dual-color labeling of cancer cells was achieved since both red and green emissions were detected in two separate channels of the microscope and an improved accuracy was obtained in comparison with single-signal MIPs. The flow cytometric cell analysis showed that the binding of STn-MIPs was significantly higher (p < 0.001) than that of non-imprinted polymer (NIP) control particles within the same cell line, allowing to distinguish populations. Based on the modularity of the luminescent core-fluorescent MIP shell architecture, the concept can be transferred in a straightforward manner to other target analytes.

Novel biodegradable molecularly imprinted polymer nanoparticles for drug delivery of methotrexate anti-cancer; synthesis, characterization and cellular studies

BACKGROUND

Recently biodegradable nanoparticles are the center of attention for the development of drug delivery systems. Molecularly imprinted polymer (MIP) is an interesting candidate for designing drug nano-carriers. MIP-based nanoparticles could be used for cancer treatment and exhibited the potential to fill gaps regarding to ligand-based nanomaterials. Also, the presence of a cross-linker can play an essential role in nanoparticle stability and physicochemical properties of nanoparticles after synthesis.

OBJECTIVES

In this research, a biodegradable drug delivery system based on MIP nanoparticles was prepared using a biodegradable cross-linker (dimethacryloyl hydroxylamine, DMHA) for methotrexate (MTX). A hydrolysable functional group CO-O-NH-CO was added to the crosslinking agent to increase the final biodegradability of the polymer.

METHODS

Firstly, a biodegradable cross-linker was synthesized. Then, the non-imprinted polymers were prepared through mini-emulsion polymerization in the absence of a template; and efficient particle size distribution was determined. Finally, methotrexate was placed in imprinted polymers to achieve the desired MIP. Different types of MIPs were synthesized using different molar ratios of template, cross-linker, and functional monomer, and the optimal molar ratio was obtained at 1:4:20, respectively.

RESULTS

HNMR successfully confirmed the chemical structure of the cross-linker. According to SEM images, nanoparticles had a spherical shape with a smooth surface. The imprinted nanoparticles showed a narrow size distribution with an average of 120 nm at a high ratio of cross-linker. The drug loading and entrapment efficiency were 6.4% and 92%, respectively. The biodegradability studies indicated that the nanoparticles prepared by DMHA had a more degradability rate than ethylene glycol dimethacrylate as a conventional cross-linker. Also, the polymer degradation rate was higher in alkaline environments. Release studies in physiological and alkaline buffer showed an initial burst release of a quarter of loaded MTX during the day and a 70% release during a week. The Korsmeyer-Peppas model described the release pattern. The cytotoxicity of MTX loaded in nanoparticles was studied on the MCF-7 cell line, and the IC50 was 3.54 μg/ml.

CONCLUSION

It was demonstrated that nanoparticles prepared by DMHA have the potential to be used as biodegradable drug carriers for anticancer delivery. Synthesis schema of molecular imprinting of methotrexate in biodegradable polymer based on dimethacryloyl hydroxylamine cross-linker, for use as nanocarrier anticancer delivery to breast tumor.

Probing the Role of Connecting Bonds and Modifying Chains in the Rational Design of Prodrug Nanoassemblies

Prodrug-based self-assembled nanoparticles combined with the merits of nanotechnology and prodrugs strategies have gradually become a research trending topic in the field of drug delivery. These prodrugs usually consist of parent drugs, connecting bonds, and modifying chains. The influences of the connecting bonds and modifying chains on the pharmaceutical characteristics, in vivo delivery fate, and antitumor activity of prodrug nanoassemblies remain elusive. Herein, three docetaxel (DTX) prodrugs were designed using sulfur bonds (thioether bond or disulfide bond) as connecting bonds and fatty alcohols (straight chain or branched chain) as modifying chains. Interestingly, the difference between connecting bonds and modifying chains deeply influenced the colloidal stability, redox responsive drug release, cytotoxicity, pharmacokinetic properties, tumor accumulation, and antitumor effect of prodrug nanoassemblies. DTX conjugated with branched chain fatty alcohols via disulfide bonds (HUA-SS-DTX) significantly improved the antitumor efficiency of DTX and reduced the systematic toxicity. Our study elaborates on the vital role of connecting bonds and modifying chains in the rational design of prodrug nanoassemblies.

Rational development of molecularly imprinted nanoparticles for blocking PD-1/PD-L1 axis

Blocking the PD-1/PD-L1 immune checkpoint has emerged as a promising strategy in cancer immunotherapy, in which monoclonal antibodies are predominately used as inhibitors. Despite their remarkable success, monoclonal antibody-based therapeutics suffer from drawbacks due to the use of antibodies, such as high cost, low stability and high frequency of immune-related adverse effects. Therefore, novel anti-PD-1/PD-L1 therapeutics that can address these issues are of significant importance. Herein, we report a molecularly imprinted polymer (MIP) based PD-1 nano inhibitor for blocking the PD-1/PD-L1 axis. The anti-PD-1 nanoMIP was rationally designed and engineered by epitope imprinting using the N-terminal epitope of PD-1 as the binding site. The anti-PD-1 nanoMIP showed good specificity and high affinity towards PD-1, yielding a disassociation constant at the 10-8 M level, much better than that between PD-1 and PD-L1. Via steric hindrance, this inhibitor could effectively block PD-1/PD-L1 interaction. Besides, it could effectively reactivate T cells and reverse the chemoresistance of tumor cells. Therefore, this present study not only provides a novel and promising immune checkpoint blockade inhibitor but also boosts further development of MIPs for cancer immunotherapy.

Curcumin-loaded protein imprinted mesoporous nanosphere for inhibiting amyloid aggregation

Some natural variants of human lysozyme are associated with systemic non-neurological amyloidosis that leads to amyloid protein fibril deposition in different tissues. Inhibition of amyloid fibrillation by nanomaterials is considered to be an effective approach to treating amyloidosis. Here, we prepared a targeted, highly loaded curcumin lysozyme-imprinted nanosphere (CUR-MIMS) that could effectively inhibit the aggregation of lysozyme with lysozyme adsorption capacity of 193.57 mg g^-1 and the imprinting factor (IF) of 3.72. CUR-MIMS could bind to lysozyme through hydrophobic interactions and effectively reduce the hydrophobicity of the total solvent-exposed surface in lysozyme fibrillation, thus reducing the self-assembly process triggered by hydrophobic interactions. Thioflavin T (ThT) analysis demonstrated that CUR-MIMS inhibited the aggregation of amyloid fibrils in a dose-dependent manner (inhibition efficiency of 56.07 %). Circular dichroism (CD) spectrum further illustrated that CUR-MIMS could significantly inhibit the transition of lysozyme from α-helix structure to β-sheet. More importantly, biological experiments proved the good biocompatibility of CUR-MIMS, which indicated the potential of our system as a future therapeutic platform for amyloidosis.

Molecularly imprinted and cladded nanoparticles for high-affinity recognition of structurally closed gangliosides

A new method called reverse microemulsion-confined ganglioside-oriented surface imprinting and cladding (RM-GOSIC) is presented for controllable preparation of nanoscale binders for high-affinity targeting gangliosides. Using GM1a, an affordable ganglioside, as a representative ganglioside target, single-core quantum dot GM1a-imprinted and GM1a-cladded polymer (cMIP) nanoparticles were prepared. The prepared cMIP nanoparticles exhibited extremely high affinity towards GM1a, with dissociation constant at the nanomolar level (3-6 nM). The prepared cMIP nanoparticles also recognized structurally closed gangliosides while their cross-reactivity towards other gangliosides remained low. The potential of the cMIP nanoparticles in biomedical applications was demonstrated by cell and tissue imaging. Thus, this approach opened a new access to the synthesis of high-affinity nanoscale binders for targeting gangliosides.

Generic imprinted fiber array strategy for high-throughput and ultrasensitive simultaneous determination of multiple neonicotinoids

Herein, a new generic fiber array based on molecular imprinting solid-phase microextraction (MIP-SPME) technology, was described to enrich trace multiple neonicotinoids with high flux from the food matrix. To begin with adsorption experiments coupled with theoretical calculations provided universal means for selecting the preferred template molecule clothianidin (CLT). Results demonstrated that the CLT-MIP fiber array exhibited significantly superior enrichment ability of 1189-2356-folds for six neonicotinoids compared with two kinds of commercial fiber arrays. Furthermore, the practicability of the CLT-MIP fiber array was verified by simultaneously determining multiple neonicotinoids in tea and honey samples. The CLT-MIP fiber array showed a limit of detection (LOD) of 0.03-0.58 μg/L for six neonicotinoids. The method also exhibited satisfactory recoveries ranging from 85.4% to 116.8% with RSD (n = 3) less than 8.8%. The imprinted fiber array has the advantages of high-throughput, predominant reproducibility, and accurate quantitation multi-component, and it may open up a new mean to efficiently enrich high-throughput and simultaneously detect multiple compounds from food samples.

Biodegradable magnesium ion-doped silica-based molecularly imprinted nanoparticles for targeting tumor cells to drugs controlled release and recognition mechanism research

Herein, we designed and constructed a novel biodegradable molecularly imprinted nanoparticles (Mg-SMSNs/DOX-Ce6 @MIPs) using a new degradable functional monomer prepared by glycerol and lactide, on magnesium ion-doped stellated mesoporous silica nanoparticles (Mg-SMSNs). These nanoparticles loaded with the anticancer drug doxorubicin (DOX) and chlorin e6 (Ce6) were used to target sialic acid (SA) overexpressed on the surface of tumor cells and release drugs in response to the tumor microenvironment. The molecularly imprinted layer avoided premature drug leakage, meanwhile, the large number of ester bonds contained in the functional monomers in the layer degraded by protonation in the tumor microenvironment to expose the drugs. Mg²⁺ doping in SMSNs enhanced the degradation performance in tumor microenvironment to achieve tumor-responsive drug release. The multifunctional monomers increased the interaction with SA, enhanced the binding force, and accurately targeted recognition was obtained. The recognition mechanism of Mg-SMSNs/DOX-Ce6 @MIPs to SA and drug release were investigated by model analysis. The cytotoxicity and cellular targeting of Mg-SMSNs/DOX-Ce6 @MIPs revealed that Mg-SMSNs/DOX-Ce6 @MIPs could specifically recognize SA to target MCF-7 tumor cells without interference. Under laser irradiation, Ce6 and DOX could achieve synergistic treatment to tumor cells. Mg-SMSNs/DOX-Ce6 @MIPs present good biological abilities in terms of active targeting, pH-responsiveness, antitumor efficiency and biocompatibility.

A ROS-Responsive Simvastatin Nano-Prodrug and its Fibronectin-Targeted Co-Delivery System for Atherosclerosis Treatment

Nanoprodrugs with responsive release properties integrate the advantages of stimuli-responsive prodrugs and nanotechnology. They would provide ultimate opportunity in fighting atherosclerosis. In this study, we synthesized a redox-responsive nanoprodrug of simvastatin (TPTS) by conjugating α-tocopherol polyethylene glycol derivative to the pharmacophore of simvastatin with a thioketal linker. TPTS formed nanoparticles and released parent simvastatin in the presence of hydrogen peroxide. Moreover, by taking advantage of the self-assembly behavior of TPTS, we developed a fibronectin-targeted delivery system (TPTS/C/T) to codelivery simvastatin prodrug and ticagrelor. In vitro and in vivo experiments indicated that TPTS and TPTS/C/T had good stability, which could reduce off-target leakage of drugs. They greatly inhibited the M1-type polarization of macrophages; reduced intracellular reactive oxygen species level and inflammatory cytokine; and TNF-α, MCP-1, and IL-1β were secreted by macrophage cells, thus providing enhanced anti-inflammatory and antioxidant effects compared with free simvastatin. TPTS/C/T realized targeted drug release to plaques and synergistic therapeutic effects of simvastatin and ticagrelor on atherosclerosis treatment in an ApoE-/- mouse model, resulting in excellent atherosclerosis therapeutic efficacy and a promising biosafety profile. Therefore, this study provides a new method for manufacturing statin nanodrugs and a new design idea for related responsive drug release nanosystems for atherosclerosis.

Preparation and application of pH-responsive drug delivery systems

Microenvironment-responsive drug delivery systems (DDSs) can achieve targeted drug delivery, reduce drug side effects and improve drug efficacies. Among them, pH-responsive DDSs have gained popularity since the pH in the diseased tissues such as cancer, bacterial infection and inflammation differs from a physiological pH of 7.4 and this difference could be harnessed for DDSs to release encapsulated drugs specifically to these diseased tissues. A variety of synthetic approaches have been developed to prepare pH-sensitive DDSs, including introduction of a variety of pH-sensitive chemical bonds or protonated/deprotonated chemical groups. A myriad of nano DDSs have been explored to be pH-responsive, including liposomes, micelles, hydrogels, dendritic macromolecules and organic-inorganic hybrid nanoparticles, and micron level microspheres. The prodrugs from drug-loaded pH-sensitive nano DDSs have been applied in research on anticancer therapy and diagnosis of cancer, inflammation, antibacterial infection, and neurological diseases. We have systematically summarized synthesis strategies of pH-stimulating DDSs, illustrated commonly used and recently developed nanocarriers for these DDSs and covered their potential in different biomedical applications, which may spark new ideas for the development and application of pH-sensitive nano DDSs.

pH-sensitive hyaluronic acid-targeted prodrug micelles constructed via a one-step reaction for enhanced chemotherapy

Although many chemotherapy prodrugs have been developed for tumor therapy, non-targeted delivery, uncontrolled release and tedious construction procedure of prodrugs still limit their clinical application in tumor treatment. In this work, hyaluronic acid (HA) which has tumor-targeting ability was used to conjugate to antitumor drug podophyllotoxin (PPT) to construct a pH-sensitive prodrug named HA-CO-O-PPT just via a one-step esterification reaction. The HA-CO-O-PPT spontaneously assembled into nano spherical micelles in aqueous medium, which had outstanding serum stability and blood compatibility. The obtained prodrug micelles (named HP micelles) exhibited a pH-responsive drug release mode with cumulative release reaching 81.2% due to their dissociation in response to acid stimulus, and had a high cellular uptake efficiency beyond 97% owing to HA receptor-mediated targeting. Furthermore, it was found that the prodrug micelles showed excellent antitumor activities in vivo with the tumor inhibition ratio up to 85% and negligible systemic toxicity. Accordingly, the pH-responsive HP micelles constructed by a simple one-step reaction, could be a promising candidate as a chemotherapeutic agent for cancer therapy.

Supramolecular Core-Shell Nanoassemblies with Tumor Microenvironment-Triggered Size and Structure Switch for Improved Photothermal Therapy

Photothermal therapy (PTT) is demonstrated to be an effective methodology for cancer treatment. However, the relatively low photothermal conversion efficiency, limited tumor accumulation, and penetration still remain to be challenging issues that hinder the clinical application of PTT. Herein, the core-shell hierarchical nanostructures induced by host-guest interaction between water-soluble pillar[5]arene (WP5) and polyethylene glycol-modified aniline tetramer (TAPEG) are constructed. The pH-responsive performance endows the core-shell nanostructures with size switchable property, with an average diameter of 200 nm in the neutral pH and 60 nm in the acidic microenvironment, which facilitates not only tumor accumulation but also tumor penetration. Moreover, the structure switch of WP5⊃TAPEG under acidic microenvironment and the dual mechanism regulated extending of п conjugate, inclusion in the hydrophobic cavity of WP5 and the dense distribution in the core-shell structured assemblies, dramatically enhance the absorption in the near-infrared-II region and, further, the photothermal conversion efficiency (60.2%). The as-designed intelligent nanoplatform is demonstrated for improved antitumor efficacy via PTT.

Molecularly imprinted polymers outperform lectin counterparts and enable more precise cancer diagnosis

Accurately analysing the particular glycosylation status of protein biomarkers is of significant importance in the precise, early diagnosis of cancer. Existing methods mainly rely on the use of antibodies and lectins. However, due to the macroscopic and microscopic heterogeneity of glycans, precise analysis of glycosylation status still remains a challenge. Molecularly imprinted polymers (MIPs), as a synthetic alternative to antibodies or lectins, may provide new solutions but have not yet been explored. Herein, we report an appealing strategy called triple MIP-based plasmonic immunosandwich assay (triMIP-PISA) for precise cancer diagnosis in terms of the relative glycosylation expression of glycoprotein biomarkers. As proof of the principle, alpha fetoprotein (AFP), which has been used as a clinical biomarker for early detection of hepatocellular carcinoma (HCC), as well as its Lens culinaris agglutinin (LCA)-reactive fraction (AFP-L3), which is mainly composed of core-fucosylated glycans, were used as two target proteoforms to test in this study. Using two MIPs that can specifically recognize the peptide sequence of AFP as well as a fucose-imprinted MIP that can specifically recognize the AFP-L3 fraction, facile simultaneous plasmon-enhanced Raman detection of AFP and AFP-L3 in serum was achieved, which allowed HCC patients to be distinguished from healthy individuals. Due to the excellent recognition properties of the MIPs that are comparable to those of antibodies and superior to those of lectins, our triMIP-PISA method exhibited improved precision as compared with an antibody plus lectin-based immunofluorescence assay. Thus, this strategy opened a new avenue towards the precise diagnosis of cancer.