Thermo- and Mechanochromic Camouflage and Self-Healing in Biomimetic Soft Actuators Based on Liquid Crystal Elastomers

Closed-Loop Recyclable and Totally Renewable Liquid Crystal Networks with Room-Temperature Programmability and Reconfigurable Functionalities

Dynamic covalent liquid crystal networks (DCv-LCNs) with straightforward (re)programmability, reprocessability, and recyclability facilitates the manufacture of sophisticated LCN actuators and intelligent robots. However, the DCv-LCNs are still limited to heat-assisted programming and polymer-to-polymer reprocessing/recycling, which inevitably lead to deterioration of the LCN structures and the actuation performances after repeated programming/processing treatments, owing to the thermal degradation of the polymer network and/or external agent interference. Here, a totally renewable azobenzene-based DCv-LCN with room-temperature programmability and polymer-to-monomers chemical recyclability is reported, which was synthesized by crosslinking the azobenzene-containing dibenzaldehyde monomer and the triamine monomer via the dynamic and dissociable imine bonds. Thanks to the water-activated dynamics of the imine bonds, the resultant DCv-LCN can be simply programmed, upon water-soaking at room temperature, to yield a UV/Vis light-driven actuator. Importantly, the reported DCv-LCN undergoes depolymerization in an acid-solvent medium at room temperature because of the acid-catalyzed hydrolysis of the imine bonds, giving rise to easy separation and recovery of both monomers in high purity, even with tolerance to additives. The recovered pure monomers can be used to regenerate totally new DCv-LCNs and actuators, and their functionalities can be reconfigured by removing old and introducing new additives, by implementing the closed-loop polymer-monomers-polymer recycling.

Logarithmic and Archimedean organic crystalline spirals

Crystals can be found in many shapes but do not usually grow as spirals. Here we show that applying a non-uniform layer of a polymer blend onto slender centimeter-size organic crystals prestrains the crystals into hybrid dynamic elements with spiral shapes that respond reversibly to environmental variations in temperature or humidity by curling. Exposure to humidity results in partial uncurling within several seconds, whereby a logarithmic-type spiral crystal is transformed into an Archimedean one. Conical helices obtained by lateral pulling of the spirals can wind around solid objects similar to plant tendrils or lift suspended objects with a positive correlation between the actuator's elongation and the cargo mass. The morphological, kinematic, and kinetic attributes turn these hybrid materials into an attractive platform for flexible sensors and soft robots, while they also provide an approach to morph crystalline fibers in non-natural spiral habits inaccessible with the common crystallization approaches.

Carbon Dots Infused 3D Printed Cephalopod Mimetic Bactericidal and Antioxidant Hydrogel for Uniaxial Mechano-Fluorescent Tactile Sensor

Cephalopods use stretchy skin and dynamic color-tuning organs for visual communication and camouflage. Inspired by these natural mechanisms, a fluorescent biomaterial for deformation-induced illumination and optical communication is proposed. This is the first report of 3D printed soft biomaterials infused with carbon dots hydrothermally derived from chitosan and benzalkonium chloride. These biomaterials exhibit a comprehensive array of properties, including significant uniaxial stretching, near-instantaneous response to tactile stimuli and pH, UV resistance, antibacterial, antioxidant, noncytotoxicity, and highlighting their potential as mechano-optical materials for biomedical applications. The hydrogel's durability is evaluated by cyclic stretching, folding, rolling, and twisting tests to ensure its integrity and good signal-to-noise ratio. The diffusion mechanism is determined by water imbibition kinetics, network parameters, and time-dependent breathing. Overcoming the common limitations of short lifespans and complex manufacturing processes in existing soft hybrids, this work demonstrates a straightforward method to produce durable, energy-independent, mechano-optical hydrogel. Combined with investigations, molecular dynamic modeling is used to understand the interactions of hydrogel components.

Cucurbit[8]uril-Mediated Supramolecular Heterodimerisation and Photoinduced [2+2] Heterocycloaddition to Generate Unexpected [2]Rotaxanes

In contrast to the self-assembly of homosupramolecules, the self-assembly of heterosupramolecules is more challenging and significant in various fields. Herein, we design and investigate a cucurbit[8]uril-mediated heterodimerisation based on an arene-fluoroarene strategy. Furthermore, the heteroternary complex is found to be able to undergo a photoinduced [2+2] heterocycloaddition, resulting in the formation of an unexpected [2]rotaxane. This work demonstrates a novel supramolecular heterodimerisation system that not only contributes to the development of photoisomerisation systems, but also enriches synthetic methods for mechanically interlocked molecules.

Oxindolyl-Based Radicals with Tunable Mechanochromic and Thermochromic Behavior

Organic radicals based dynamic covalent chemistry is promising in preparing stimuli-responsive chromic materials, due to their simplicity of dissociation/association, accompanied with distinct color changes during the process. However, suitable organic radicals for dynamic covalent chemistry have not been widely explored yet. Herein, a series of oxindolyl-based mono-radicals (OxRs) with different substituents were successfully synthesized and studied systematically as potential building blocks for stimuli-responsive chromic materials. These OxRs would dimerize spontaneously to form their corresponding dimers. The structures of dimers were unambiguously confirmed through low-temperature 1H NMR and single-crystal X-ray diffraction analyses. Dynamic interconversion between monomers and dimers was achieved by reversible cleavage and recovery of the σ-bond upon soft external stimuli (temperature, pressure, and solvent polarity), accompanied by significant color changes. It is interesting that the stability of the mono-radical could be tuned through changing different substituents, and consequently altering the bond dissociation energy of the dynamic covalent bond between monomers. These new OxRs characterized by appreciable properties are entitled to more opportunities in developing mechanochromic and thermochromic materials, where their responsiveness to stimuli can be readily controlled by the substituents adhered.

Antiswelling Photochromic Hydrogels for Underwater Optically Camouflageable Flexible Electronic Devices

Optical camouflage offers an effective strategy for enhancing the survival chances of underwater flexible electronic devices akin to underwater organisms. Photochromism is one of the most effective methods to achieve optical camouflage. In this study, antiswelling hydrogels with photochromic properties were prepared using a two-step solvent replacement strategy and explored as underwater optically camouflaged flexible electronic devices. The hydrophobic network formed upon polymerization of hydroxyethyl methacrylate (HEMA) ensured that the hydrogels possessed outstanding antiswelling properties. Internetwork hydrogen bonding interactions allowed the hydrogels to exhibit tissue-adaptable mechanical properties and excellent self-bonding capabilities. The introduction of polyoxometalates further enhanced the hydrogels' mechanical and self-bonding properties while imparting photochromic capability. The hydrogels could be rapidly and reversibly colored under 365 nm UV irradiation. The bleaching rate of the colored hydrogels increased with temperature, bleaching within 12 h at 60 °C but maintaining the color for more than 5 days at room temperature. The self-bonding and photochromic properties enabled the hydrogels to be easily assembled into optically camouflaged underwater flexible electronic devices for underwater motion sensing and wireless information transmission. An optically camouflaged strain sensor was first assembled for underwater limb motion sensing. Additionally, an underwater optically camouflaged wireless information exchange device was assembled to enable wireless communication with a smartphone. This work provided an effective strategy for the optical camouflage of underwater flexible electronic devices, presenting opportunities for next-generation underwater hydrogel-based flexible devices.

Programmable, Self-Healable, and Photochromic Liquid Crystal Elastomers Based on Dynamic Hindered Urea Bonds for Biomimetic Flowers

Recently, researchers have been exploring the use of dynamic covalent bonds (DCBs) in the construction of exchangeable liquid crystal elastomers (LCEs) for biomimetic actuators and devices. However, a significant challenge remains in achieving LCEs with both excellent dynamic properties and superior mechanical strength and stability. In this study, a diacrylate-functionalized monomer containing dynamic hindered urea bonds (DA-HUB) is employed to prepare exchangeable LCEs through a self-catalytic Michael addition reaction. By incorporating DA-HUB, the LCE system benefits from DCBs and hydrogen bonding, leading to materials with high mechanical strength and a range of dynamic properties such as programmability, self-healing, and recyclability. Leveraging these characteristics, bilayer LCE actuators with controlled reversible thermal deformation and outstanding dimensional stability are successfully fabricated using a simple welding method. Moreover, a biomimetic triangular plum, inspired by the blooming of flowers, is created to showcase reversible color and shape changes triggered by light and heat. This innovative approach opens new possibilities for the development of biomimetic and smart actuators and devices with multiple functionalities.

An Octopus-Inspired Stimulus-Responsive Structural Color Hydrogel for Uterus Cervical Canal Stent

Soft-bodied aquatic organisms have exhibited remarkable capabilities in navigating and moving within liquid environments serving as a profound inspiration for the development of bionic robots with intricate movements. Traditional rigid components are being replaced by stimulus-responsive soft materials such as hydrogels and shape memory polymers, leading to the creation of dynamically responsive soft robots. In this study, the development of a bionic robot inspired by the shape of an octopus and the adsorptive properties of its tentacles, specifically tailored for targeted stimulation and pH sensing in the cervix, are presented. This approach involves the design of a soft, water-based Janus adhesive hydrogel patch that adheres to specific parts of the cervix and responds to pH changes through external stimuli. The hydrogel patch incorporates inverse opal microstructures mimicking the legs of an octopus, to facilitate efficient and stable locomotion, unidirectional transport of biofluids, and pH-responsive behavior. This miniature bionic robot showcases controlled adhesion and precise unidirectional fluid transport highlighting its potential for targeted stimulus response and pH sensing in the uterine cervical tract. This breakthrough opens new avenues for medical applications within the expanding field of soft-bodied robotics.

Design, Synthesis, and Performance of Photo-Responsive Liquid Crystal Polymers with Stepwise Deformation Capability

Photo-responsive liquid crystal polymers (LCPs) have potential application value in flexible robots, artificial muscles, and microfluidic control. In recent years, significant progress has been made in the development of LCPs. However, the preparation of LCPs with continuous and controllable stepwise deformation capabilities remains a challenge. In this study, visible photo-responsive cyanostilbene monomer, UV photo-responsive azobenzene monomer, and multiple hydrogen bond crosslinker are used to prepare photo-responsive LCPs capable of achieving continuously and controllable stepwise deformation. The comprehensive investigation of the multiple light response ability and photo-induced deformation properties of these copolymers is conducted. The results reveal that in the first stage of photo-induced deformation under 470 nm blue light irradiation, the deformation angle decreases with a reduction in cyanostilbene content in the copolymer component, ranging from 40° in AZ0-CS4 to 0° in AZ4-CS0. In the second stage of photo-induced deformation under 365 nm UV irradiation, the deformation angle increases with the increase of azobenzene content, ranging from 0° of AZ0-CS4 to 89.4° of AZ4-CS0. Importantly, the deformation between these two stages occurs as a continuous process, allowing for a direct transition from the first-stage to the second-stage deformation by switching the light source from 470 to 365 nm.

What Exactly Can Bionic Strategies Achieve for Flexible Sensors?

Flexible sensors have attracted great attention in the field of wearable electronic devices due to their deformability, lightness, and versatility. However, property improvement remains a key challenge. Fortunately, natural organisms exhibit many unique response mechanisms to various stimuli, and the corresponding structures and compositions provide advanced design ideas for the development of flexible sensors. Therefore, this Review highlights recent advances in sensing performance and functional characteristics of flexible sensors from the perspective of bionics for the first time. First, the "twins" of bionics and flexible sensors are introduced. Second, the enhancements in electrical and mechanical performance through bionic strategies are summarized according to the prototypes of humans, plants, and animals. Third, the functional characteristics of bionic strategies for flexible sensors are discussed in detail, including self-healing, color-changing, tangential force, strain redistribution, and interfacial resistance. Finally, we summarize the challenges and development trends of bioinspired flexible sensors. This Review aims to deepen the understanding of bionic strategies and provide innovative ideas and references for the design and manufacture of next-generation flexible sensors.

Aluminum Molecular Ring Meets Deep Eutectic Solvents: Adaptive Assembly and Optical Behavior

Different from the previous neutral reaction solvent system, this work explores the synthesis of Al-oxo rings in ionic environments. Deep eutectic solvents (DESs) formed by quaternary ammonium salts hydrogen bond acceptor (HBA) and phenols hydrogen bond donor (HBD) further reduce the melting point of the reaction system and provide an ionic environment. Further, the quaternary ammonium salt was chosen as the HBA because it contains a halogen anion that matches the size of the central cavity of the molecular ring. Based on this thought, five Al8 ion pair cocrystals were synthesized via "DES thermal". The general formula is Q+ ⊂ {Cl@[Al8(BD)8(μ2-OH)4L12]} (AlOC-180-AlOC-185, Q+ = tetrabutylammonium, tetrapropylammonium, 1-butyl-3-methylimidazole; HBD = phenol, p-chlorophenol, p-fluorophenol; HL = benzoic acid, 1-naphthoic acid, 1-pyrenecarboxylic acid, anthracene-9-carboxylic acid). Structural studies reveal that the phenol-coordinated Al molecular ring and the quaternary ammonium ion pair form the cocrystal compounds. The halogen anions in the DES component are confined in the center of the molecular ring, and the quaternary ammonium cations are located in the organic shell. Such an adaptive cocrystal binding pattern is particularly evident in the structures coordinated with low-symmetry ligands such as naphthoic acid and pyrene acid. Finally, the optical behavior of these cocrystal compounds is understood from the analysis of crystal structure and theoretical calculation.

Beyond Color Boundaries: Pioneering Developments in Cholesteric Liquid Crystal Photonic Actuators

Creatures in nature make extensive use of structural color adaptive camouflage to survive. Cholesteric liquid crystals, with nanostructures similar to those of natural organisms, can be combined with actuators to produce bright structural colors in response to a wide range of stimuli. Structural colors modulated by nano-helical structures can continuously and selectively reflect specific wavelengths of light, breaking the limit of colors recognizable by the human eye. In this review, the current state of research on cholesteric liquid crystal photonic actuators and their technological applications is presented. First, the basic concepts of cholesteric liquid crystals and their nanostructural modulation are outlined. Then, the cholesteric liquid crystal photonic actuators responding to different stimuli (mechanical, thermal, electrical, light, humidity, magnetic, pneumatic) are presented. This review describes the practical applications of cholesteric liquid crystal photonic actuators and summarizes the prospects for the development of these advanced structures as well as the challenges and their promising applications.

Photochemically responsive polymer films enable tunable gliding flights

Miniaturized passive fliers based on smart materials face challenges in precise control of shape-morphing for aerodynamics and contactless modulation of diverse gliding modes. Here, we present the optical control of gliding performances in azobenzene-crosslinked liquid crystal networks films through photochemical actuation, enabling reversible and bistable shape-morphing. First, an actuator film is integrated with additive constructs to form a rotating glider, inspired by the natural maple samara, surpassing natural counterparts in reversibly optical tuning of terminal velocity, rotational rate, and circling position. We demonstrate optical modulation dispersion of landing points for the photo-responsive microfliers indoors and outdoors. Secondly, we show the scalability of polymer film geometry for miniature gliders with similar light tunability. Thirdly, we extend the material platform to other three gliding modes: Javan cucumber seed-like glider, parachute and artificial dandelion seed. The findings pave the way for distributed microflier with contactless flight dynamics control.

Photothermal Conversion of the Oleophilic PVDF/Ti3C2Tx Porous Foam Enables Non-Aqueous Liquid System Applicable Actuator

Various physical and chemical reaction processes occur in non-aqueous liquid systems, particularly in oil phase systems. Therefore, achieving efficient, accurate, controllable, and cost-effective movement and transfer of substances in the oil phase is crucial. Liquid-phase photothermal actuators (LPAs) are commonly used for material transport in liquid-phase systems due to their remote operability and precise control. However, existing LPAs typically rely on materials like hydrogels and flexible polymers, commonly unsuitable for non-aqueous liquids. Herein, a 3D porous poly(vinylidene fluoride) (PVDF)/Ti3C2Tx actuator is developed using a solvent displacement method. It demonstrates directional movement and controlled material transport in non-aqueous liquid systems. When subject to infrared light irradiation (2.0 W cm-2), the actuator achieves motion velocities of 7.3 and 6 mm s-1 vertically and horizontally, respectively. The actuator's controllable motion capability is primarily attributed to the foam's oil-wettable properties, 3D porous oil transport network, and the excellent photothermal conversion performance of Ti3C2Tx, facilitating thermal diffusion and the Marangoni effect. Apart from multidimensional directions, the actuator enables material delivery and obstacle avoidance by transporting and releasing target objects to a predetermined position. Hence, the developed controllable actuator offers a viable solution for effective motion control and material handling in non-aqueous liquid environments.

Multi-stimulus perception and visualization by an intelligent liquid metal-elastomer architecture

Multi-stimulus responsive soft materials with integrated functionalities are elementary blocks for building soft intelligent systems, but their rational design remains challenging. Here, we demonstrate an intelligent soft architecture sensitized by magnetized liquid metal droplets that are dispersed in a highly stretchable elastomer network. The supercooled liquid metal droplets serve as microscopic latent heat reservoirs, and their controllable solidification releases localized thermal energy/information flows for enabling programmable visualization and display. This allows the perception of a variety of information-encoded contact (mechanical pressing, stretching, and torsion) and noncontact (magnetic field) stimuli as well as the visualization of dynamic phase transition and stress evolution processes, via thermal and/or thermochromic imaging. The liquid metal-elastomer architecture offers a generic platform for designing soft intelligent sensing, display, and information encryption systems.

Bioinspired Mechanochromic Liquid Crystal Materials: From Fundamentals to Functionalities and Applications

Inspired by intriguing color changeable ability of natural animals, the design and fabrication of artificial mechanochromic materials capable of changing colors upon stretching or pressing have attracted intense scientific interest. Liquid crystal (LC) is a self-organized soft matter with anisotropic molecular alignment. Due to the sensitivity to various external stimulations, LC has been considered as an emerging and appealing responsive building block to construct intelligent materials and advanced devices. Recently, mechanochromic LC materials have becoming a hot topic in multifields from flexible artificial skins to visualized sensors and smart biomimetic devices. In this review, the recent progress of mechanochromic LCs is comprehensively summarized. Firstly, the mechanism and functionalities of mechanochromic LC is introduced, followed by preparation of various functional materials based on mechanochromic LCs. Then the applications of mechanochromic LCs are provided. Finally, the conclusion and outlooks of this field is given. This overview is hoped to provide inspiration in fabrication of advanced functional soft materials for scientists and engineers from multidisciplines including materials science, elastomers, chemistry, and physical science.

4D Printable liquid crystal elastomers with restricted nanointerfacial slippage for long-term-cyclic-stability photothermal actuation

Liquid crystal elastomers (LCEs) blended with photothermal nanofillers can reversibly and rapidly deform their shapes under external optical stimuli. However, nanointerfacial slipping inevitably occurs between the LCE molecules and the nanofillers due to their weak physical interactions, eventually resulting in cyclic instability. This work presents a versatile strategy to fabricate nanointerfacial-slipping-restricted photoactuation elastomers by chemically bonding the nanofillers into a thermally actuatable liquid crystal network. We experimentally and theoretically investigated three types of metal-based nanofillers, including zero-dimensional (0D) nanoparticles, one-dimensional (1D) nanowires, and two-dimensional (2D) nanosheets. The toughly crosslinked nanointerface allows for remarkably promoted interfacial thermal conductivity and stress transfer. Therefore, the resultant actuators enable the realization of long-term-cyclic-stability 4D-printed flexible intelligent systems such as the optical gripper, crawling robot, light-powered self-sustained windmill, butterflies with fluttering wings, and intelligent solar energy collection system.

Novel Biomimetic "Spider Web" Robust, Super-Contractile Liquid Crystal Elastomer Active Yarn Soft Actuator

In nature, spider web is an interwoven network with high stability and elasticity from silk threads secreted by spider. Inspired by the structure of spider webs, light-driven liquid crystal elastomer (LCE) active yarn is designed with super-contractile and robust weavability. Herein, a novel biomimetic gold nanorods (AuNRs) @LCE yarn soft actuator with hierarchical structure is fabricated by a facile electrospinning and subsequent photocrosslinking strategies. Meanwhile, the inherent mechanism and actuation performances of the as-prepared yarn actuator with interleaving network are systematically analyzed. Results demonstrate that thanks to the unique "like-spider webs" structure between fibers, high molecular orientation within the LCE microfibers and good flexibility, they can generate super actuation strain (≈81%) and stable actuation performances. Importantly, benefit from the robust covalent bonding at the organic-inorganic interface, photopolymerizable AuNRs molecules are uniformly introduced into the polymer backbone of electrospun LCE yarn to achieve tailorable shape-morphing under different light intensity stimulation. As a proof-of-concept illustration, light-driven artificial muscles, micro swimmers, and hemostatic bandages are successfully constructed. The research disclosed herein can offer new insights into continuous production and development of LCE-derived yarn actuator that are of paramount significance for many applications from smart fabrics to flexible wearable devices.

Shape programming of liquid crystal elastomers

Liquid crystal elastomers (LCEs) are shape-morphing materials that demonstrate reversible actuation when exposed to external stimuli, such as light or heat. The actuation's complexity depends heavily on the instilled liquid crystal alignment, programmed into the material using various shape-programming processes. As an unavoidable part of LCE synthesis, these also introduce geometrical and output restrictions that dictate the final applicability. Considering LCE's future implementation in real-life applications, it is reasonable to explore these limiting factors. This review offers a brief overview of current shape-programming methods in relation to the challenges of employing LCEs as soft, shape-memory components in future devices.

MXenes for Bioinspired Soft Actuators: Advancements in Angle-Independent Structural Colors and Beyond

Soft actuators have garnered substantial attention in current years in view of their potential appliances in diverse domains like robotics, biomedical devices, and biomimetic systems. These actuators mimic the natural movements of living organisms, aiming to attain  enhanced flexibility, adaptability, and versatility. On the other hand, angle-independent structural color has been achieved through innovative design strategies and engineering approaches. By carefully controlling the size, shape, and arrangement of nanostructures, researchers have been able to create materials exhibiting consistent colors regardless of the viewing angle. One promising class of materials that holds great potential for bioinspired soft actuators is MXenes in view of their exceptional mechanical, electrical, and optical properties. The integration of MXenes for bioinspired soft actuators with angle-independent structural color offers exciting possibilities. Overcoming material compatibility issues, improving color reproducibility, scalability, durability, power supply efficiency, and cost-effectiveness will play vital roles in advancing these technologies. This perspective appraises the development of bioinspired MXene-centered soft actuators with angle-independent structural color in soft robotics.

Dynamic Shape Change of Liquid Crystal Polymer Based on An Order-Order Phase Transition

Liquid crystal actuators conventionally undergo shape changes across an order-disorder phase transition between liquid crystal (LC) and isotropic phases. In this study, we introduce an innovative Liquid Crystal Polymer (LCP) actuator harnessing an order-order LC phase transition mechanism. The LCP film is easily stretchable within the LC phase, facilitated by the π-π stacking of phenyl groups serving as robust physical crosslinking points, and thereby transforms to a stable monodomain structure. The resultant monodomain LCP actuator shows a distinctive reversible dynamic shape change, exhibiting extension followed by contraction along the LC director on cooling. The extension is propelled by the reversible smectic C to smectic A phase transition, and the contraction is attributed to the re-entry to the smectic C phase from smectic A phase. Thermal annealing temperature determines this peculiar dynamic shape change, which occurs during both heating and cooling processes. This pivotal attribute finds manifestation in gripper and flower-shaped actuators, adeptly executing grabbing and releasing as well as blooming and closure motions within a single thermal stimulation. In essence, our study introduces an innovative approach to the realm of LCP actuators, ushering in a new avenue for the design and fabrication of versatile and dynamically responsive LCP actuators.

Fabrication and Photothermal Actuation Performances of Electrospun Carbon Nanotube/Liquid Crystal Elastomer Blend Yarn Actuators

Liquid crystal elastomers (LCEs) are a kind of polymer network that combines the entropic elasticity of polymer networks and the mesogenic unit by means of mild cross-linking. LCEs have been extensively investigated in various fields, including artificial muscles, actuators, and microrobots. However, LCEs are characterized by the poor mechanical properties of the light polymers themselves. In this study, we propose to prepare a carbon nanotube/liquid crystal elastomer (CNT/LCE) composite yarn by electrospinning technology and a two-step cross-linking strategy. The CNT/LCE composite yarn exhibits a reversible shrinkage ratio of nearly 70%, a tensile strength of 16.45 MPa, and a relatively sensitive response speed of ∼3 s, enabling a fast response by photothermal actuation. The research disclosed in this article may provide new insights for the development of artificial muscles and next-generation smart robots.

Mechanochromic and ionic conductive cholesteric liquid crystal elastomers for biomechanical monitoring and human-machine interaction

Cholesteric liquid crystal elastomers (CLCEs) that combine rubbery elasticity with structural colour from self-assembled helical nanostructures are of paramount importance for diverse applications such as biomimetic skins, adaptive optics and soft robotics. Despite great advances, it is challenging to integrate electrical sensing and colour-changing characteristics in a single CLCE system. Here, we report the design and synthesis of an ionic conductive cholesteric liquid crystal elastomer (iCLCE) through in situ Michael addition and free-radical photopolymerization of CLCE precursors on silane-functionalized polymer ionic liquid networks, in which robust covalent chemical bonding was formed at the interface. Thanks to superior mechanochromism and ionic conductivity, the resulting iCLCEs exhibit dynamic colour-changing and electrical sensing functions in a wide range upon mechanical stretching, and can be used for biomechanical monitoring during joint bending. Importantly, a capacitive elastomeric sensor can be constructed through facilely stacking iCLCEs, where the optical and electrical dual-signal reporting performance allows intuitive visual localization of pressure intensity and distribution. Moreover, proof-of-concept application of the iCLCEs has been demonstrated with human-interactive systems. The research disclosed herein can provide new insights into the development of bioinspired somatosensory materials for emerging applications in diverse fields such as human-machine interaction, prostheses and intelligent robots.

Near-Infrared Light-Driven MXene/Liquid Crystal Elastomer Bimorph Membranes for Closed-Loop Controlled Self-Sensing Bionic Robots

More recently, soft actuators have evoked great interest in the next generation of soft robots. Despite significant progress, the majority of current soft actuators suffer from the lack of real-time sensory feedback and self-control functions, prohibiting their effective sensing and multitasking functions. Therefore, in this work, a near-infrared-driven bimorph membrane, with self-sensing and feedback loop control functions, is produced by layer by layer (LBL) assembling MXene/PDDA (PM) onto liquid crystal elastomer (LCE) film. The versatile integration strategy successfully prevents the separation issues that arise from moduli mismatch between the sensing and the actuating layers, ultimately resulting in a stable and tightly bonded interface adhesion. As a result, the resultant membrane exhibited excellent mechanical toughness (tensile strengths equal to 16.3 MPa (||)), strong actuation properties (actuation stress equal to 1.56 MPa), and stable self-sensing (gauge factor equal to 4.72) capabilities. When applying the near-infrared (NIR) laser control, the system can perform grasping, traction, and crawling movements. Furthermore, the wing actuation and the closed-loop controlled motion are demonstrated in combination with the insect microcontroller unit (MCU) models. The remote precision control and the self-sensing capabilities of the soft actuator pave a way for complex and precise task modulation in the future.

Design and Characterization of Deformable Superstructures Based on Amine-Acrylate Liquid Crystal Elastomers

Deformable superstructures are man-made materials with large deformation properties that surpass those of natural materials. However, traditional deformable superstructures generally use conventional materials as substrates, limiting their applications in multi-mode reconfigurable robots and space-expandable morphing structures. In this work, amine-acrylate-based liquid crystal elastomers (LCEs) are used as deformable superstructures substrate to provide high driving stress and strain. By changing the molar ratio of amine to acrylate, the thermal and mechanical properties of the LCEs are modified. The LCE with a ratio of 0.9 exhibited improved polymerization degree, elongation at break, and toughness. Besides an anisotropic finite deformation model based on hyperelastic theory is developed for the LCEs to capture the configuration variation under temperature activation. Built upon these findings, an LCE-based paper-cutting structure with negative Poisson's ratio and a 2D lattice superstructure model are combined, processed, and molded by laser cutting. The developed superstructure is pre-programmed to the configuration required for service conditions, and the deformation processes are analyzed using both experimental and finite element methods. This study is expected to advance the application of deformable superstructures and LCEs in the fields of defense and military, aerospace, and bionic robotics.

A Dual-Responsive Liquid Crystal Elastomer for Multi-Level Encryption and Transient Information Display

Information security has gained increasing attention in the past decade, leading to the development of advanced materials for anti-counterfeiting, encryption and instantaneous information display. However, it remains challenging to achieve high information security with simple encryption procedures and low-energy stimuli. Herein, a series of strain/temperature-responsive liquid crystal elastomers (LCEs) are developed to achieve dual-modal, multi-level information encryption and real-time, rewritable transient information display. The as-prepared polydomain LCEs can change from an opaque state to a transparent state under strain or temperature stimuli, with the transition strains or temperatures highly dependent on the concentration of long-chain flexible spacers. Information encrypted by different LCE inks can be decrypted under specific strains or temperatures, leading to multi-level protection of information security. Furthermore, with the combination of the phase transition of polydomain LCEs and the photothermal effect of multi-walled carbon nanotubes (MWCNTs), we achieved a repeatable transient information display by using near-infrared (NIR) light as a pen for writing. This study provides new insight into the development of advanced encryption materials with versatility and high security for broad applications.

A multifunctional optoelectronic device based on 2D material with wide bandgap

Low-dimensional materials exhibit unique quantum confinement effects and morphologies as a result of their nanoscale size in one or more dimensions, making them exhibit distinctive physical properties compared to bulk counterparts. Among all low-dimensional materials, due to their atomic level thickness, two-dimensional materials possess extremely large shape anisotropy and consequently are speculated to have large optically anisotropic absorption. In this work, we demonstrate an optoelectronic device based on the combination of two-dimensional material and carbon dot with wide bandgap. High-efficient luminescence of carbon dot and extremely large shape anisotropy (>1500) of two-dimensional material with the wide bandgap of >4 eV cooperatively endow the optoelectronic device with multi-functions of optically anisotropic blue-light emission, visible light modulation, wavelength-dependent ultraviolet-light detection as well as blue fluorescent film assemble. This research opens new avenues for constructing multi-function-integrated optoelectronic devices via the combination of nanomaterials with different dimensions.

Programmable and Self-Healable Liquid Crystal Elastomer Actuators Based on Halogen Bonding

Shape-changing polymeric materials have gained significant attention in the field of bioinspired soft robotics. However, challenges remain in versatilizing the shape-morphing process to suit different tasks and environments, and in designing systems that combine reversible actuation and self-healing ability. Here, we report halogen-bonded liquid crystal elastomers (LCEs) that can be arbitrarily shape-programmed and that self-heal under mild thermal or photothermal stimulation. We incorporate halogen-bond-donating diiodotetrafluorobenzene molecules as dynamic supramolecular crosslinks into the LCEs and show that these relatively weak crosslinks are pertinent for their mechanical programming and self-healing. Utilizing the halogen-bonded LCEs, we demonstrate proof-of-concept soft robotic motions such as crawling and rolling with programmed velocities. Our results showcase halogen bonding as a promising, yet unexplored tool for the preparation of smart supramolecular constructs for the development of advanced soft actuators.

Shape-Programmable Liquid-Crystalline Polyurethane-Based Multimode Actuators Triggered by Light-Driven Molecular Motors

In recent years, light-driven soft actuators have been rapidly developed as enablers in the fabrication of artificial robots and biomimetic devices. However, it remains challenging to amplify molecular isomerization to multiple modes of macroscopic actuation with large amplitude and complex motions. Here, a strategy is reported to build a light-responsive liquid-crystalline polyurethane elastomer by phototriggered overcrowded alkene-based molecular motors. A trifunctional molecular motor modified with an ethylene glycol spacer on the rotor and stator functions as a crosslinker and unidirectional stirrer that amplifies molecular motion into macroscopic movement. The shape-programmable polymeric film presents superior mechanical properties and characteristic shape-memory effect. Furthermore, diverse modes of motions including bending, unwinding, and contracting with tunable actuation speed over a wide range are achieved. Such research is hoped to pave a new way for the design of advanced light-responsive soft actuators and robots.

Synthesis of Self-healing and Light-, Thermal-, and Humidity-induced Deformative Polyurethane Actuator

Intelligent actuating materials have drawn enormous attention because of their potential applications in soft robots, smart sensors, bionics, etc. Aiming to integrate light, thermal, and humidity stimuli deformations and self-healing function into a single polymer, a smart actuating polyurethane material CPPU-50 is designed and successfully synthesized through co-polymerization of azobenzene-containing Azo-C12 , polyethylene glycol 200 (PEG200), and 4,4'-diphenylmethane diisocyanate (MDI) at a ratio of 1:1:2. The obtained polyurethane CPPU-50 exhibits good photoinduced bending, thermal responsive shape memory effect, humidity triggered deflections and self-healing properties. Furthermore, an actuator combining light and thermal stimuli is created and the self-healing CPPU-50 film can withstand the object of 1800 times without tearing. This work can pave a way for further development of long-lived multi-stimuli-responsive actuating devices and intelligent materials.

Additive Manufacturing of Liquid Crystal Elastomer Actuators Based on Knitting Technology

Liquid crystal elastomer (LCE) exhibits large and reversible deformability originating from the alignment of liquid crystal mesogens. Additive manufacturing provides high controllability in the alignment and shaping process of LCE actuators. However, it still remains a challenge to customize LCE actuators with both diverse 3D deformability and recyclability. In this study, a new strategy is developed to exploit knitting technique to additively manufacture LCE actuators. The obtained LCE actuators are fabric-structured with designed geometry and deformability. By accurately adjusting the parameters of the knitting patterns as modules, diverse geometry is pixel-wise designed, and complex 3D deformations including bending, twisting, and folding are quantitatively controlled. In addition, the fabric-structured LCE actuators can be threaded, stitched, and reknitted to achieve advanced geometry, integrated multi-functions and efficient recyclability. This approach allows the fabrication of versatile LCE actuators with potential applications in smart textiles and soft robots.

Cholesteric Liquid Crystal Polymeric Coatings for Colorful Artificial Muscles and Motile Humidity Sensor Skin Integrated with Magnetic Composites

Structural colorful cholesterics show impressive susceptibility to external stimulation, leading to applications in electro/mechano-chromic devices. However, out-of-plane actuation of structural colorful actuators based on cholesterics and the integration with other stimulation remains underdeveloped. Herein, colorful actuators and motile humidity sensors are developed using humidity-responsive cholesteric liquid crystal networks (CLCNs) and magnetic composites. The developed colorful actuator can exhibit synergistic out-of-plane shape morphing and color change in response to humidity, with CLCNs as colorful artificial muscles. Through the integration with magnetic control, the motile sensor can be navigated to open and confined spaces with the aid of friction to detect local relative humidity. The integration of multi-stimulation actuation of cholesteric magnetic actuators will expand the research frontier of structural colorful actuators and motile sensors for confined spaces.

Mechanochromic Self-Healing Materials with Good Stretchability, Shape Memory Behavior, Cyclability, and Reversibility Based on Multiple Hydrogen Bonds

It is challenging to develop materials with room-temperature self-healing ability and mechanochromic response from mechanical stimuli to optical signals by a facile and simple preparation process. Herein, novel mechanochromic self-healing materials were designed by a simple synthesis procedure, balancing the mechanical properties, self-healing, stretchability, and mechanochromic response. Moreover, we designed and prepared the mechanochromic self-healing materials with different soft and hard segments by introducing multiple hydrogen bonds into the network, improving the mechanical properties and self-healing efficiency. In addition, the optimized sample exhibited good shape memory behavior (shape recovery ratio of 94.4%), self-healing properties (healed by pressing during stretching process), high tensile strength (17.6 MPa), superior stretchability (893%), fast mechanochromic response (strain of 272%), and great cyclic stretching-relaxing properties (higher than 10 times at strain of 300%). Above all, mechanochromic self-healing materials have promising potential in various fields, such as stress sensing, inkless writing, damage warning, deformation detection, and damage distribution.

Rheological Tunable Magnetic Fluids with Long-Term Stability

Magnetic fluids have advantages such as flow ability and solid-like property in strong magnetic fields, but have to suffer from the tradeoff between suspension stability and flow resistance. In this work, a thermal/photo/magnetorheological water-based magnetic fluid is fabricated by using oleic acid-coated Fe₃ O₄ (Fe₃ O₄ @OA) nanoparticles as the magnetic particles and the amphiphilic penta block copolymer (PTMC-F127-PTMC)-based aqueous solution as the carrier fluid. Due to the hydrophobic self-assembly between Fe₃ O₄ @OA and PTMC-F127-PTMC, the Newtonian-like magnetic fluid has outstanding long-term stability and reversible rheological changes between the low-viscosity flow state and the 3D gel structure. In the linear viscoelastic region, the viscosity exhibits an abrupt increase from below 0.10 Pa s at 20 °C to ≈1.3 × 10⁴  Pa s at 40 °C. Benefitting from the photothermal and magnetocaloric effects of the Fe₃ O₄ @OA nanoparticles, the rheological change process also can be controlled by near infrared light and alternating magnetic field, which endows the magnetic fluid with the applications in the fields of mobile valves, moveable switches, buffer or damping materials in sealed devices, etc.

Controlled Diels-Alder "Click" Strategy to Access Mechanically Aligned Main-Chain Liquid Crystal Networks

Aligned liquid crystal polymers are materials of interest for electronic, optic, biological and soft robotic applications. The manufacturing and processing of these materials have been widely explored with mechanical alignment establishing itself as a preferred method due to its ease of use and widespread applicability. However, the fundamental chemistry behind the required two-step polymerization for mechanical alignment has limitations in both fabrication and substrate compatibility. In this work we introduce a new protection-deprotection approach utilizing a two-stage Diels-Alder cyclopentadiene-maleimide step-growth polymerization to enable mild yet efficient, fast, controlled, reproducible and user-friendly polymerizations, broadening the scope of liquid crystal systems. Thorough characterization of the films by DSC, DMA, POM and WAXD show the successful synthesis of a uniaxially aligned liquid crystal network with thermomechanical actuation abilities.

Reconfigurable Fluorescent Liquid Crystal Elastomers for Integrated Visual and Haptic Information Storage

The rapid advancements in information technology require new information storage and display materials. However, the development of on-demand information storage systems with multiple modes remains a significant challenge. As a pioneering approach, this study designed an integrated visual and haptic information storage and display using a reconfigurable fluorescent liquid crystal elastomer (FLCE) with dynamic covalent bonds. The FLCEs were fabricated in two steps of amine-acrylate aza-Michael addition and photopolymerization, and they simultaneously exhibited phototunable fluorescence caused by the reversible Z/E photoisomerization of the chromophores and a reprogrammable shape owing to the catalyst-free transesterification. In addition, we established various information storage and display modes featuring the characteristics of reversibly photoswitchable fluorescence, shape memory, and thermally reconfigurable shape with a reconfigurable FLCE system. Moreover, a strategy to display the information by incorporating both visual and haptic feedback is implemented for fulfilling the needs of the visually impaired and related users. Such reconfigurable FLCE systems will aid in the development of on-demand information storage, display, and protection devices.

Bioinspired MXene-Based Soft Actuators Exhibiting Angle-Independent Structural Color

In nature, many living organisms exhibiting unique structural coloration and soft-bodied actuation have inspired scientists to develop advanced structural colored soft actuators toward biomimetic soft robots. However, it is challenging to simultaneously biomimic the angle-independent structural color and shape-morphing capabilities found in the plum-throated cotinga flying bird. Herein, we report biomimetic MXene-based soft actuators with angle-independent structural color that are fabricated through controlled self-assembly of colloidal SiO2 nanoparticles onto highly aligned MXene films followed by vacuum-assisted infiltration of polyvinylidene fluoride into the interstices. The resulting soft actuators are found to exhibit brilliant, angle-independent structural color, as well as ultrafast actuation and recovery speeds (a maximum curvature of 0.52 mm-1 can be achieved within 1.16 s, and a recovery time of ~ 0.24 s) in response to acetone vapor. As proof-of-concept illustrations, structural colored soft actuators are applied to demonstrate a blue gripper-like bird's claw that can capture the target, artificial green tendrils that can twine around tree branches, and an artificial multicolored butterfly that can flutter its wings upon cyclic exposure to acetone vapor. The strategy is expected to offer new insights into the development of biomimetic multifunctional soft actuators for somatosensory soft robotics and next-generation intelligent machines.

Synthesis and Characterization of a Liquid Crystal-Modified Polydimethylsiloxane Rubber with Mechanical Adaptability Based on Chain Extension in the Process of Crosslinking

The mechanical adaptive material is a kind of functional material that can effectively dissipate energy and suppress the increase of its stress under continuous strain in a large deformation area, which are vital in artificial muscles, connection devices, soft artificial intelligence robots, and other areas. Scientists have been working to broaden the platform of the material's mechanical adaptive platform and improve its mechanical strength by specific structure design. Based on it, we expect to introduce a mechanism of energy dissipation from the molecular chain scale to further improve mechanical adaptability. We developed a liquid crystal-modified polydimethylsiloxane rubber with mechanical adaptability based on chain extension in the process of crosslinking. Results showed that liquid crystal (0.7 mol %)-modified silicone rubber can obviously dissipate energy to achieve mechanical adaptive function, and the energy dissipation ratio of polydimethylsiloxane rubber (MQ), 4-propyl-4'-vinyl-1,1'-bi(cyclohexane)-modified polydimethylsiloxane rubber (3CCV-MQ), and 4-methoxyphenyl-4-(3-butenyloxy) benzoate-modified polydimethylsiloxane rubber (MBB-MQ) gradually decreases from 30 to 24%. Excessive thiol groups of liquid crystal-modified polydimethylsiloxane react with its vinyl group to achieve the chain extension, which significantly improves the mechanical strength from 2.74 to 5.83 MPa and elongation at break from 733 to 1096%. This research offers some new insights into improving the mechanical strength of silicone rubber and is of great significance for the application of the mechanical adaptive material.

Spontaneous and Continuous Actuators Driven by Fluctuations in Ambient Humidity for Energy-Harvesting Applications

Self-oscillating soft actuators that enable spontaneous and continuous motion under an external stimulus with no human intervention have attracted extensive attention due to the great value of the realization of more sustainable and low-power-consumption actuators. However, the achievement of such actuators that collect chemical energy from the fluctuations in ambient humidity is still a great challenge. Here, an actuator film based on spiropyran@agarose (SP@AG) that can spontaneously and continuously collect chemical energy from the fluctuations in ambient humidity is developed. It is noteworthy that the SP@AG film has excellent self-oscillation behavior and a high oscillation amplitude (184°) under the size (40 × 8 mm) or load of 116 mg (about 5.2 times of the film weight). Moreover, on the basis of the self-oscillating motion, an energy conversion device is constructed by integrating the soft actuator with a piezoelectric PVDF film, which can spontaneously and continuously generate an output voltage of about 30 mV. Finally, a proof of concept for an "intelligent light-controllable window" that can open under humidity stimulus and change color under light is proposed herein. Overall, the self-oscillating actuator driven by fluctuations in ambient humidity shows immense potential in response to the atmospheric humidity of day-night rhythm and humid-energy-harvesting devices.

Design, Regulation, and Applications of Soft Actuators Based on Liquid-Crystalline Polymers and Their Composites

Soft actuators designed from stimuli-responsive polymers often possess a certain amount of bionic functionality because of their versatile deformation. Liquid-crystalline polymers (LCPs) and their composites are among the most fascinating materials for soft actuators due to their great advantages of flexible structure design and easy regulation. In this Spotlight on Applications, we mainly focus on our group's latest research progress in soft actuators based on LCPs and their composites. Some representative research findings from other groups are also included for a better understanding of this research field. Above all, the essential principles for the responsive behavior and reconfigurable performance of the soft actuators are discussed, from the perspective of material morphology and structure design. Further on, we analyze recent work on how to precisely regulate the responsive modes and quantify the operating parameters of soft actuators. Finally, some application examples are given to demonstrate well-designed soft actuators with different functions under varied working environments, which is expected to provide inspiration for future research in developing more intelligent and multifunctional integrated soft actuators.