Lignin-Inorganic Interfaces: Chemistry and Applications from Adsorbents to Catalysts and Energy Storage Materials

Full-chain analysis on emerging contaminants in soil: Source, migration and remediation

Emerging contaminants (ECs) are gaining attention due to their prevalence and potential negative impacts on the environment and human health. This paper provides a comprehensive review of the status and trends of soil pollution caused by ECs, focusing on their sources, migration pathways, and environmental implications. Significant ECs, including plastics, synthetic polymers, pharmaceuticals, personal care products, plasticizers, and flame retardants, are identified due to their widespread use and toxicity. Their presence in soil is attributed to agricultural activities, urban waste, and wastewater irrigation. The review explores both horizontal and vertical migration pathways, with factors such as soil type, organic matter content, and moisture levels influencing their distribution. Understanding the behavior of ECs in soil is critical to mitigating their long-term risks and developing effective soil remediation strategies. The paper also examines the advantages and disadvantages of in situ and ex situ treatment approaches for ECs, highlighting optimal physical, chemical, and biological treatment conditions. These findings provide a fundamental basis for addressing the challenges and governance of soil pollution induced by ECs.

Unveiling the Nature of lignin's Interaction with Molecules: A Mechanistic Understanding of Adsorption of Methylene Blue Dye

The valorization of lignin into advanced materials for water and soil remediation is experiencing a surge in demand. However, it is imperative that material research and manufacturing be sustainable to prevent exacerbating environmental issues. Meeting these requirements necessitates a deeper understanding of the role of lignin's functional groups in attracting targeted species. This research delves into the interaction mechanisms between lignin and organic molecules, using the adsorption of the cationic dye Methylene Blue (MB+) as a case study. Herein, we aim to quantitatively estimate the contribution of different interaction types to the overall adsorption process. While carbonyl groups were found to have no significant role in attraction, carboxylic groups (-COOH) exhibited significantly lower adsorption compared with hydroxyl groups (-OH). Through alternately blocking aliphatic and phenolic -OH groups, we determined that 61% of the adsorption occurred through hydrogen bonding and 38% via electrostatic interactions. Performance studies of modified lignin along with spectroscopic methods (XPS, FTIR) confirmed the negligible role of π-π interactions in adsorption. This study offers fundamental insights into the mechanistic aspects of MB adsorption on lignin, laying the groundwork for potential modifications to enhance the performance of lignin-based adsorbents. The findings underscore the importance of hydroxyl groups and provide a roadmap for future studies examining the influence of steric factors and interactions with other organic molecules.

Silica Biomineralization with Lignin Involves Si-O-C Bonds That Stabilize Radicals

Plants undergo substantial biomineralization of silicon, which is deposited primarily in cell walls as amorphous silica. The mineral formation could be moderated by the structure and chemistry of lignin, a polyphenol polymer that is a major constituent of the secondary cell wall. However, the reactions between lignin and silica have not yet been well elucidated. Here, we investigate silica deposition onto a lignin model compound. Polyphenyl propanoid was synthesized from coniferyl alcohol by oxidative coupling with peroxidase in the presence of acidic tetramethyl orthosilicate, a silicic acid precursor. Raman, Fourier transform infrared, and X-ray photoelectron spectroscopies detected changes in lignin formation in the presence of silicic acid. Bonds between the Si-O/Si-OH residues and phenoxyl radicals and lignin functional groups formed during the first 3 h of the reaction, while silica continued to form over 3 days. Thermal gravimetric analysis indicated that lignin yields increased in the presence of silicic acid, possibly via the stabilization of phenolic radicals. This, in turn, resulted in shorter stretches of the lignin polymer. Silica deposition initiated within a lignin matrix via the formation of covalent Si-O-C bonds. The silica nucleants grew into 2-5 nm particles, as observed via scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy. Additional silica precipitated into an extended gel. Collectively, our results demonstrate a reciprocal relation by which lignin polymerization catalyzes the formation of silica, and at the same time silicic acid enhances lignin polymerization and yield.

Recent progress in tannin and lignin blended metal oxides and metal sulfides as smart materials for electrochemical sensor applications

Our technologically advanced civilization has made sensors an essential component. They have potential uses in the pharmaceutical sector, clinical analysis, food quality control, environmental monitoring, and other areas. One of the most active fields of analytical chemistry research is the fabrication of electrochemical sensors. An intriguing area of electroanalytical chemistry is the modification of electrodes using polymeric films. Due to their benefits, which include high adhesion to the electrode surface, chemical stability of the coating, superior selectivity, sensitivity, and homogeneity in electrochemical deposition, polymer-modified electrodes have attracted a great deal of interest in the electroanalytical sector. Conducting polymers are an important material for sensing devices because of their fascinating features, which include high mechanical flexibility, electrical conductivity, and the capacity to be electrochemically converted between electronically insulating and conducting states. Tannin or lignin nanomaterials can be an inter-linker leading to flexible and functional polymeric networks. There is a continuing demand for fast and simple analytical methods for the determination of many clinically important biomarkers, food additives, environmental pollutants etc. This review in a comprehensive way summarizes and discusses the various metal oxide and sulfide-incorporated tannin and lignin scaffolds using electrochemical sensing and biosensing.

In-situ preparation of lignin/Fe3O4 magnetic spheres as bifunctional material for the efficient removal of metal ions and methylene blue

In this paper, magnetic composite of lignin/Fe3O4 spheres were synthesized via a straightforward one-step in-situ solvothermal method showing good capacity for adsorbing heavy metal ions and dyes. The physicochemical properties of lignin/Fe3O4 spheres are analyzed using a range of techniques such as SEM, XRD, FTIR, VSM, TG, and BET. Lignin/Fe3O4 spheres exhibited high adsorption capacities of 100.00, 353.36 and 223.71 and 180.18 mg/g for Cu (II), Ni (II) and Cr (VI) metal ions and methylene blue (MB) with equilibrium attained within 60 min. After the recycling experiments, lignin/Fe3O4 spheres still possesses excellent superparamagnetic properties and displays high adsorption capacity. The lignin/Fe3O4 spheres are an efficient and continuous adsorbent to remove heavy metal ions of Cu (II), Ni (II), Cr (VI) and cationic dyes of methylene blue in wastewater, which proves the great potential in practical pollutants treatment applications for water systems.

Toughening brittle kraft lignin coating on mismatched substrate with spider Silk-Inspired protein as an interfacial modulator

Current production of functional coatings majorly relies on petrochemical formulations. While they have provided substantial benefits, their fabrication processes as well as their disposal created widespread ecological catastrophes. Thus, there is a pressing demand and calls for a radical transformation to develop sustainable solutions by using renewable building blocks. Herein, we report on a novel coating formulation by combining largely undervalued kraft lignin from the forest industry, with genetically engineered and recombinantly produced spider silk-inspired protein through the industrial biotechnology platform. Unmodified kraft lignin was used as the main bulk component in the coating given its abundance and low cost. The nanometer-thin spider silk-inspired protein (SSIP) was used as a primary layer exhibiting dual functionalities: (i) modulating the mechanical properties of inherently brittle kraft lignin, (ii) substantially increasing the interfacial binding of kraft lignin to the underlying rigid silica substrate with the mismatched physicochemical properties. Our findings demonstrate how synergistic interplay components could result in scalable and durable functional coatings which could potentially be used in various medical and industrial applications in the future.

Recent Advances of Lignin Functionalization for High-Performance and Advanced Functional Rubber Composites

The biomass lignin is the only large-volume renewable feedstock that is composed of aromatics but has been largely underutilized and is sought for valorization as a value-added material. Recent research has highlighted lignin as a promising alternative to traditional petrol-based reinforcements and functional additives for rubber composites. This review summarized the recent advances in the functionalization of lignin for a variety of rubber composites, as well as the compounding techniques for effectively dispersing lignin within the rubber matrix. Significant progress has been achieved in the development of high-performance and advanced functional rubber/lignin composites through carefully designing the structure of lignin-based additives and the optimization of interfacial morphologies. This Review discussed the effect of lignin on composite properties, including mechanical reinforcement, dynamic properties, antiaging performance, and oil resistance, and also the advanced stimuli-responsive performance in detail. A critical analysis for the future development of rubber/lignin composites is presented as concluding remarks.

MoS2 nanoflower-decorated lignin nanoparticles for superior lubricant properties

Lignin has been, for a long time, treated as a low-value waste product. To change this scenario, high-value applications have been recently pursued, e.g., the preparation of hybrid materials with inorganic components. Although hybrid inorganic-based materials can benefit from the reactive lignin phenolic groups at the interface, often responsible for optimizing specific properties, this is still an underexplored field. Here, we present a novel and green material based on the combination of hydroxymethylated lignin nanoparticles (HLNPs) with molybdenum disulfide (MoS₂) nanoflowers grown via a hydrothermal route. By bringing together the lubricant performance of MoS₂ and the structural stability of biomass-based nanoparticles, a MoS₂-HLNPs hybrid is presented as a bio-derived additive for superior tribological performances. While FT-IR analysis confirmed the structural stability of lignin after the hydrothermal growth of MoS₂, TEM and SEM micrographs revealed a homogeneous distribution of MoS₂ nanoflowers (average size of 400 nm) on the HLNPs (average size of 100 nm). Regarding the tribological tests, considering a pure oil as reference, only HLNPs as bio-derived additives led to a reduction in the wear volume of 18%. However, the hybrid of MoS₂-HLNPs led to a considerably higher reduction (71%), pointing out its superior performance. These results open a new window of opportunity for a versatile and yet underexplored field that can pave the way for a new class of biobased lubricants.

Combined Catalysis: A Powerful Strategy for Engineering Multifunctional Sustainable Lignin-Based Materials

The production and engineering of sustainable materials through green chemistry will have a major role in our mission of transitioning to a more sustainable society. Here, combined catalysis, which is the integration of two or more catalytic cycles or activation modes, provides innovative chemical reactions and material properties efficiently, whereas the single catalytic cycle or activation mode alone fails in promoting a successful reaction. Polyphenolic lignin with its distinctive structural functions acts as an important template to create materials with versatile properties, such as being tough, antimicrobial, self-healing, adhesive, and environmentally adaptable. Sustainable lignin-based materials are generated by merging the catalytic cycle of the quinone-catechol redox reaction with free radical polymerization or oxidative decarboxylation reaction, which explores a wide range of metallic nanoparticles and metal ions as the catalysts. In this review, we present the recent work on engineering lignin-based multifunctional materials devised through combined catalysis. Despite the fruitful employment of this concept to material design and the fact that engineering has provided multifaceted materials able to solve a broad spectrum of challenges, we envision further exploration and expansion of this important concept in material science beyond the catalytic processes mentioned above. This could be accomplished by taking inspiration from organic synthesis where this concept has been successfully developed and implemented.

Lignin-derived new hydrogen donors for photoinitiating systems in dental materials

OBJECTIVES

The aim of this study is to develop amine free photo-initiating system (PIs) for the photopolymerization of dental methacrylate resins, using seven new hydrogen donors HDA-HDG derived from β-O-4 lignin model.

METHODS

Seven experimental CQ/HD PIs were formulated with Bis-GMA/TEGDMA (70 w%/30 w%). CQ/EDB system was chosen as the comparison group. FTIR-ATR was used to monitor the polymerization kinetics and double bond conversion. Bleaching property and color stability were evaluated using a spectrophotometer. Molecular orbitals calculations were used to demonstrate C-H bond dissociation energies of the novel HDs. Depth of cure of the HD based systems were compared to the EDB based one. Cytotoxicity was also studied by CCK8 assay using tissue of mouse fibroblasts (L929 cells).

RESULTS

Compared to CQ/EDB system, the new CQ/HD systems show comparable or better photopolymerization performances (1 mm-thick samples). Comparable or even better bleaching properties were also obtained with the new amine-free systems. Comparing to EDB, all HDs exhibited significantly lower C-H bond dissociation energies by molecular orbitals calculations. Groups with new HD showed higher depth of cure. OD and RGR values were similar to that of the CQ/EDB group, ensuring the feasibility of the new HDs in dental materials.

CLINICAL SIGNIFICANCE

The new CQ/HD PI systems could be potentially useful in dental materials, presenting improvements in restorations' esthetic and biocompatibility.

A review of the extraction methods and advanced applications of lignin-silica hybrids derived from natural sources

The global trend of increasing energy demand along the large volume of wastewater generated annually from the paper pulping and cellulose production industries are considered as serious dilemma that may need to be solved within these current decades. Within this discipline, lignin, silica or lignin-silica hybrids attained from biomass material have been considered as prospective candidates for the synthesis of advanced materials. In this study, the roles and linking mechanism between lignin and silica in plants were studied and evaluated. The effects of the extraction method on the quality of the obtained material were summarized to show that depending on the biomass feedstocks, different retrieval processes should be considered. The combination of alkaline treatment and acidic pH adjustment is proposed as an effective method to recover lignin-silica with high applicability for various types of raw materials. From considerations of the advanced applications of lignin and silica materials in environmental remediation, electronic devices and rubber fillers future valorizations hold potential in conductive materials and electrochemistry. Along with further studies, this research could not only contribute to the development of zero-waste manufacturing processes but also propose a solution for the fully exploiting of by-products from agricultural production.

Lignin-Based Admixtures: A Scientometric Analysis and Qualitative Discussion Applied to Cement-Based Composites

The development of lignin-based admixtures (LBAs) for cement-based composites is an alternative to valorizing residual lignins generated in biorefineries and pulp and paper mills. Consequently, LBAs have become an emerging research domain in the past decade. This study examined the bibliographic data on LBAs through a scientometric analysis and in-depth qualitative discussion. For this purpose, 161 articles were selected for the scientometric approach. After analyzing the articles' abstracts, 37 papers on developing new LBAs were selected and critically reviewed. Significant publication sources, frequent keywords, influential scholars, and contributing countries in LBAs research were identified during the science mapping. The LBAs developed so far were classified as plasticizers, superplasticizers, set retarders, grinding aids, and air-entraining admixtures. The qualitative discussion revealed that most studies have focused on developing LBAs using Kraft lignins from pulp and paper mills. Thus, residual lignins from biorefineries need more attention since their valorization is a relevant strategy for emerging economies with high biomass availability. Most studies focused on production processes, chemical characterizations, and primary fresh-state analyses of LBA-containing cement-based composites. However, to better assess the feasibility of using different LBAs and encompass the multidisciplinarity of this subject, it is mandatory that future studies also evaluate hardened-sate properties. This holistic review offers a helpful reference point to early-stage researchers, industry professionals, and funding authorities on the research progress in LBAs. It also contributes to understanding the role of lignin in sustainable construction.

Breathable Lignin Nanoparticles as Reversible Gas Swellable Nanoreactors

The design of stimuli-responsive lignin nanoparticles (LNPs) for advanced applications has hitherto been limited to the preparation of lignin-grafted polymers in which usually the lignin content is low (<25 wt.%) and its role is debatable. Here, the preparation of O₂ -responsive LNPs exceeding 75 wt.% in lignin content is shown. Softwood Kraft lignin (SKL) is coprecipitated with a modified SKL fluorinated oleic acid ester (SKL-OlF) to form colloidal stable hybrid LNPs (hy-LNPs). The hy-LNPs with a SKL-OlF content ranging from 10 to 50 wt.% demonstrated a reversible swelling behavior upon O₂ /N₂ bubbling, increasing their size - ≈35% by volume - and changing their morphology from spherical to core-shell. Exposition of hy-LNPs to O₂ bubbling promotes a polarity change on lignin-fluorinated oleic chains, and consequently their migration from the inner part to the surface of the particle, which not only increases the particle size but also endows hy-LNPs with enhanced stability under harsh conditions (pH < 2.5) by the hydration barrier effect. Furthermore, it is also demonstrated that these new stimuli-responsive particles as gas tunable nanoreactors for the synthesis of gold nanoparticles. Combining a straightforward preparation with their enhanced stability and responsiveness to O₂ gas these new LNPs pave the way for the next generation of smart lignin-based nanomaterials.

Renewable plant-derived lignin for electrochemical energy systems

Lignin, as one of the most abundant natural polymers, has been proved to be a promising material for the construction of high-performance electrochemical energy systems, including electrodes, electrolytes, and separators, because of their low-cost and sustainable natures and unique structure with abundant functional group. In this review article, we outline some key contributions in this field such as fundamental principles and various electrochemical energy systems including rechargeable batteries, supercapacitors, solar cells, and fuel cells. At the same time, we also point out the significant scientific discussion and critical barriers for lignin-based materials for electrochemical energy systems and also provides feasible strategies for preparing new sustainable energy materials.

Kraft lignin and its derivates - A study on the adsorption of mono and multielement metals, potential use for noble metal recycling and an alternative material for solid base catalyst

Lignin is a natural polymer containing diverse functional groups and displaying an affinity for metals. Kraft lignin can be used as a carbon source, as a cleaving lignin structure for aromatic macromers or in the addition and modification of functional groups by the development of new active chemical sites. In this context, the aim of the present study is to investigate the adsorption of mono and multi-element metals solutions on lignin derivatives (unmodified Kraft lignin, acetylated Kraft lignin, charcoal Kraft lignin and activated carbon Kraft lignin). Parameters that affect adsorption processes, such as pH, contact time and adsorbent dose, were optimized in each case. The best adsorption condition was obtained at pH 7.00, a contact time of 120 min and with adsorbent dose of 30 mg. Also, unmodified Kraft lignin shows high adsorption selectivity (99%) for gold and palladium in acidic solutions. Acetylated and charcoal Kraft lignin resulted in lower adsorption levels in comparison with unmodified Kraft lignin. Activated carbon, however, reached adsorptions of over 86% for all metals. Finally, unmodified Kraft lignin impregnated with palladium presents a promising heterogeneous support in the Suzuki-Miyaura reaction.

Lignin-silver triggered multifunctional conductive hydrogels for skinlike sensor applications

Conductive hydrogels have attracted tremendous attention as a novel generation of wearable devices and body monitoring due to their great stretchability and high flexibility. Here, a multifunctional cellulose nanocrystal @sodium lignosulfonate-silver-poly(acrylamide) nanocomposite hydrogel was prepared by radical polymerization within only a few minutes. This polymerization rapidly occurred by lignosulfonate-silver (Ls-Ag) dynamic catalysis that efficiently activated ammonium persulfate (APS) to initiate the free-radical polymerization. In particular, the hydrogel exhibited excellent tensile strength (406 kPa), ultrahigh stretchability (1880 %), self-recovery, and fatigue resistance. Furthermore, due to the inclusion of Ls-Ag metal ion nanocomposite in the hydrogels, the composite hydrogel presented repeated adhesion to various objects, excellent conductivity (σ ∼ 9.5 mS cm^-1), remarkable UV resistance (100 % shielding of the UV spectral region), and high antibacterial activity (above 98 %), which enabled the hydrogel to be applied to epidermal sensors. In addition, the high-sensitivity (gauge factor of 2.46) sensor constructed of the hydrogel monitored the large and subtle movements of the human body and was used as a biological electrode to collect human electromyography and electrocardiographic signals. This work provided a novel strategy for the high-value utilization of lignin, which had potential application prospects in many fields such as wearable bioelectrodes.

Lignin-Derived Quinone Redox Moieties for Bio-Based Supercapacitors

Because of their rapid charging and discharging, high power densities, and excellent cycling life stabilities, supercapacitors have great potential for use in electric vehicles, portable electronics, and for grid frequency modulation. The growing need for supercapacitors that are both efficient and ecologically friendly has generated curiosity in developing sustainable biomass-based electrode materials and electrolytes. Lignin, an aromatic polymer with remarkable electroactive redox characteristics and a large number of active functional groups, is one such candidate for use in renewable supercapacitors. Because its chemical structure features an abundance of quinone groups, lignin undergoes various surface redox processes, storing and releasing both electrons and protons. Accordingly, lignin and its derivatives have been tested as electroactive materials in supercapacitors. This review discusses recent examples of supercapacitors incorporating electrode materials and electrolytes derived from lignin, focusing on the pseudocapacitance provided by the quinone moieties, with the goal of encouraging the use of lignin as a raw material for high-value applications. Employing lignin and its derivatives as active materials in supercapacitor electrodes and as a redox additive in electrolytes has the potential to minimize environmental pollution and energy scarcity while also providing economic benefits.

Lignin and Keratin-Based Materials in Transient Devices and Disposables: Recent Advances Toward Materials and Environmental Sustainability

Rising concerns and the associated negative implications of pollution from e-waste and delayed decomposition and mineralization of component materials (e.g., plastics) are significant environmental challenges. Hence, concerted pursuit of accurate and efficient control of the life cycle of materials and subsequent dematerialization in target environments has become essential in recent times. The emerging field of transient technology will play a significant role in this regard to help overcome current environmental challenges by enabling the use of novel approaches and new materials with unique functionalities to produce devices and materials such as disposable diagnostic devices, flexible solar panels, and foldable displays that are more ecologically benign, low-cost, and sustainable. The prerequisites for materials employed in transient devices and disposables include biodegradability, biocompatibility, and the inherent ability to mineralize or dissipate in target environments (e.g., body fluids) in a short lifetime with net-zero impact. Biomaterials such as lignin and keratin are well-known to be among the most promising environmentally benign, functional, sustainable, and industrially applicable resources for transient devices and disposables. Consequently, considering the current environmental concerns, this work focuses on the advances in applying lignin and keratin-based materials in short-life electronics and single-use consumables, current limitations, future research outlook toward materials, and environmental sustainability.

Towards a Complete Exploitation of Brewers’ Spent Grain from a Circular Economy Perspective

In the present work, brewers’ spent grain (BSG), which represents the major by-product of the brewing industry, was recovered from a regional brewery and fractionated in order to obtain a complete valorization. In particular, the whole process was divided in two main parts. A first pretreatment with hot water in an autoclave allowed the separation of a solution containing the soluble proteins and sugars, which accounted for 25% of the total starting biomass. This first step allowed the preparation of a medium that was successfully employed as a valuable growing medium for different microbial fermentations, leading to valuable fungal biomass as well as triglycerides with a high content of linear or branched fatty acids, depending on the microorganism used. The solid water-insoluble residue was then submitted to a lignocellulose deep eutectic solvent-mediated fractionation, which allowed the recovery of two important main fractions: BSG cellulose and BSG lignin. The latter product was tested as potential precursor for the development of cement water reducers with encouraging results. This combination of treatments of the waste biomass appeared to be a promising sustainable strategy for the development of the full exploitation of BSG from a circular economy perspective.

Lignin-Supported Heterogeneous Photocatalyst for the Direct Generation of H2O2 from Seawater

The development of smart and sustainable photocatalysts is in high priority for the synthesis of H₂O₂ because the global demand for H₂O₂ is sharply rising. Currently, the global market share for H₂O₂ is around 4 billion US$ and is expected to grow by about 5.2 billion US$ by 2026. Traditional synthesis of H₂O₂ via the anthraquinone method is associated with the generation of substantial chemical waste as well as the requirement of a high energy input. In this respect, the oxidative transformation of pure water is a sustainable solution to meet the global demand. In fact, several photocatalysts have been developed to achieve this chemistry. However, 97% of the water on our planet is seawater, and it contains 3.0-5.0% of salts. The presence of salts in water deactivates the existing photocatalysts, and therefore, the existing photocatalysts have rarely shown reactivity toward seawater. Considering this, a sustainable heterogeneous photocatalyst, derived from hydrolysis lignin, has been developed, showing an excellent reactivity toward generating H₂O₂ directly from seawater under air. In fact, in the presence of this catalyst, we have been able to achieve 4085 μM of H₂O₂. Expediently, the catalyst has shown longer durability and can be recycled more than five times to generate H₂O₂ from seawater. Finally, full characterizations of this smart photocatalyst and a detailed mechanism have been proposed on the basis of the experimental evidence and multiscale/level calculations.

Removed heavy metal ions from wastewater reuse for chemiluminescence: Successive application of lignin-based composite hydrogels

The novel sulfomethylated lignin-grafted-polyacrylic acid (SL-g-PAA) hydrogel was fabricated in this work via a facile and green synthetic strategy for the efficient removal of heavy metal ions from wastewater, and then successively reused for chemiluminescence (CL). The sulfomethylation of lignin was first performed to improve its water solubility and introduce numerous active sites for adsorption of heavy metal ions. The as-synthesized SL-g-PAA hydrogel with high content of lignin exhibited the highly efficient and rapid removal of various metal ions from simulated wastewater. More importantly, the spent hydrogel (M²⁺@SL-g-PAA) after adsorption was reused for the first time to develop a new CL system by an ingenious strategy, in which these metal ions adsorbed on M²⁺@SL-g-PAA act as heterogeneous catalytic sites to catalyze the CL reaction between N-(4-aminobutyl)-N-ethylisoluminol (ABEI) and H₂O₂. The resultant CL system displayed high CL intensity and long duration time, which could be observed by naked eye in the dark and lasted for > 24 h. The combination of facile fabrication process, renewable raw materials, and ingenious strategy for successive application in adsorption and CL endows this lignin-based composite hydrogel with a great potential for application in wastewater treatment, biological imaging and cold light sources.

Construction of Biomass-Derived Hybrid Organogel Electrodes with a Cross-Linking Conductive Network for High-Performance All-Solid-State Supercapacitors

The biomass-based inter-transmission network architecture is expected to act on all-solid-state supercapacitors (ASSSCs) by building excellent conductive paths and achieving high ionic conductivity to promote their development as future electronic devices. Here, biomass-derived hybrid organogel electrodes constructed by incorporating polyaniline (PANI) into cellulose/dealkaline lignin (C/DL) film architectures exhibit an impressive specific capacitance (582 F g^-1 at 1 A g^-1) due to the effective dispersion and doping of PANI. Moreover, the specific capacitance of the best C/DL-PANI electrode is nearly 19 times higher than that of a cellulose-PANI electrode, which is attributed to the contribution of DL to the pseudocapacitance. ASSSCs assembled using the C/DL-PANI electrodes and the DL gel electrolyte exhibit excellent specific capacitance (344 F g^-1 at 1 A g^-1), Coulombic efficiency (∼100% for 5000 cycles), cycle stability (85.7% for 5000 cycles at 1 A g^-1), and energy density (58.1 W h kg^-1 at 0.5 kW kg^-1). The ASSSCs showed a comparable or even higher electrochemical performance than the reported PANI-based or biomass-based ASSSCs, which can be due to the conductive network of the biomass-derived electrodes, the migration of ions between the electrodes through the gel electrolyte ion pathway, and the interfacial synergy. This innovative work paves the way for the development of ASSSC applications based on biomass materials.

Multifunctional lignin-based nanocomposites and nanohybrids

Significant progress in lignins valorization and development of high-performance sustainable materials have been achieved in recent years. Reports related to lignin utilization indicate excellent prospects considering green chemistry, chemical engineering, energy, materials and polymer science, physical chemistry, biochemistry, among others. To fully realize such potential, one of the most promising routes involves lignin uses in nanocomposites and nanohybrid assemblies, where synergistic interactions are highly beneficial. This review first discusses the interfacial assembly of lignins with polysaccharides, proteins and other biopolymers, for instance, in the synthesis of nanocomposites. To give a wide perspective, we consider the subject of hybridization with metal and metal oxide nanoparticles, as well as uses as precursor of carbon materials and the assembly with other biobased nanoparticles, for instance to form nanohybrids. We provide cues to understand the fundamental aspects related to lignins, their self-assembly and supramolecular organization, all of which are critical in nanocomposites and nanohybrids. We highlight the possibilities of lignin in the fields of flame retardancy, food packaging, plant protection, electroactive materials, energy storage and health sciences. The most recent outcomes are evaluated given the importance of lignin extraction, within established and emerging biorefineries. We consider the benefit of lignin compared to synthetic counterparts. Bridging the gap between fundamental and application-driven research, this account offers critical insights as far as the potential of lignin as one of the frontrunners in the uptake of bioeconomy concepts and its application in value-added products.

Unravelling the Hydration Barrier of Lignin Oleate Nanoparticles for Acid- and Base-Catalyzed Functionalization in Dispersion State

Lignin nanoparticles (LNPs) are promising renewable nanomaterials with applications ranging from biomedicine to water purification. However, the instability of LNPs under acidic and basic conditions severely limits their functionalization for improved performance. Here, we show that controlling the degree of esterification can significantly improve the stability of lignin oleate nanoparticles (OLNPs) in acidic and basic aqueous dispersions. The high stability of OLNPs is attributed to the alkyl chains accumulated in the shell of the particle, which delays protonation/deprotonation of carboxylic acid and phenolic hydroxyl groups. Owing to the enhanced stability, acid‐ and base‐catalyzed functionalization of OLNPs at pH 2.0 and pH 12.0 via oxirane ring‐opening reactions were successfully performed. We also demonstrated these new functionalized particles as efficient pH‐switchable dye adsorbents and anticorrosive particulate coatings.

LignoPhot: Conversion of hydrolysis lignin into the photoactive hybrid lignin/Bi4O5Br2/BiOBr composite for simultaneous dyes oxidation and Co2+ and Ni2+ recycling

Valorization of lignin is still an open question and lignin has therefore remained an underutilized biomaterial. This situation is even more pronounced for hydrolysis lignin, which is characterized by a highly condensed and excessively cross-linked structure. We demonstrate the synthesis of photoactive lignin/Bi₄O₅Br₂/BiOBr bio-inorganic composites consisting of a lignin substrate that is coated by semiconducting nanosheets. The XPS analysis reveals that growing these nanosheets on lignin instead on cellulose prevents the formation of Bi⁵⁺ ions at the surface region, yielding thus a modified heterojunction Bi₄O₅Br₂/BiOBr. The material contains 18.9% of Bi₄O₅Br₂/BiOBr and is effective for the photocatalytic degradation of cationic methylene blue (MB) and zwitterionic rhodamine B (RhB) dyes under light irradiation. Lignin/Bi₄O₅Br₂/BiOBr decreases the dye concentration from 80 mg L^-1 to 12.3 mg L^-1 for RhB (85%) and from 80 mg L^-1 to 4.4 mg L^-1 for MB (95%). Complementary to the dye degradation, the lignin as a main component of the composite, was found to be efficient and rapid biosorbent for nickel, lead, and cobalt ions. The low cost, stability and ability to simultaneously photo-oxidize organic dyes and adsorb metal ions, make the photoactive lignin/Bi₄O₅Br₂/BiOBr composite a prospective material for textile wastewaters remediation and metal ions recycling.

Recent advances and challenges on removal and recycling of phosphate from wastewater using biomass-derived adsorbents

As the severe damage of phosphate enrichment in the water ecosystem and the supply shortage of phosphate rock, developing an efficient method for the removal and recycling of phosphate from wastewater is of great significance. To achieve this goal, adsorption technology has been widely investigated, and various adsorbents were developed. Among them, the biomass-derived adsorbents including biomass-derived carbon-based materials, biomass-based anion exchangers and metal-biomass composites have attracted increasing attention over the past years due to the low cost, abundant renewable raw materials and environmental friendliness. However, different adsorbents usually exhibit variable adsorption performances for phosphate, which highly depends on their design strategies, preparation methods and potential adsorption mechanisms. Thus, this review comprehensively summarizes the recent researches on the removal and recycling of phosphate from wastewater using the biomass-derived adsorbents. Especially, the design strategies, preparation methods, adsorption performances and mechanisms of these reported biomass-derived adsorbents are discussed in detail. Moreover, as the significant strategies to recover and recycling phosphate, the elution and direct use of phosphate-loaded adsorbents as fertilizers are also presented. Although the excellent adsorption performance has been obtained, some challenges are still existing, which should be given more attention in the following researches to facilitate the development and industrial application of biomass-derived adsorbents.

Lignin Nanoparticles and Their Nanocomposites

Lignin nanomaterials have emerged as a promising alternative to fossil-based chemicals and products for some potential added-value applications, which benefits from their structural diversity and biodegradability. This review elucidates a perspective in recent research on nanolignins and their nanocomposites. It summarizes the different nanolignin preparation methods, emphasizing anti-solvent precipitation, self-assembly and interfacial crosslinking. Also described are the preparation of various nanocomposites by the chemical modification of nanolignin and compounds with inorganic materials or polymers. Additionally, advances in numerous potential high-value applications, such as use in food packaging, biomedical, chemical engineering and biorefineries, are described.

Electrospun lignin-PVP nanofibers and their ability for structuring oil

This work explores the electrospinnability of low-sulfonate Kraft lignin (LSL)/polyvinylpyrrolidone (PVP) solutions in N,N-dimethylformamide (DMF) and the ability of the different micro- and nano-architectures generated to structure castor oil. LSL/PVP solutions were prepared at different concentrations (8-15 wt%) and LSL:PVP ratios (90:10-0:100) and physico-chemically and rheologically characterized. The morphology of electrospun nanostructures mainly depends on the rheological properties of the solution. Electrosprayed nanoparticles or micro-sized particles connected by thin filaments were obtained from solutions with low LSL/PVP concentrations and/or high LSL:PVP ratios, whereas beaded or bead-free nanofibers were produced by increasing concentration and/or decreasing LSL:PVP ratio, due to enhanced extensional viscoelastic properties and non-Newtonian characteristics. Electrospun LSL/PVP nanofibers are able to form oleogels by simply dispersing them into castor oil at concentrations between 10 and 30 wt%. The rheological properties of the oleogels may be tailored by modifying the LSL:PVP ratio and nanofibers content. The potential application of these oleogels as bio-based lubricants was also explored in a tribological cell. Satisfactory friction and wear results are achieved when using oleogels structured by nanofibers mats with enhanced gel-like properties as lubricants. Overall, electrospinning of lignin/PVP solutions can be proposed as a simple and effective method to produce nanofibers for oil structuring.

Emerging Potassium-ion Hybrid Capacitors

As a new type of capacitor-battery hybrid energy storage device, metal-ion capacitors have attracted widespread attention because of their high-power density while ensuring energy density and long lifespan. Potassium-ion capacitors (KICs) featuring the merits of abundant potassium resources, lower standard electrode potential, and low cost have been considered as potential alternatives to lithium-/sodium-ion capacitors. However, KICs still face issues including unsatisfactory reaction kinetics, low energy density, and poor lifetime owing to the large radius of the potassium ion. In this Review, the importance of emerging potassium-ion capacitor is addressed. The Review offers a brief discussion of the fundamental working principle of KICs, along with an overview of recent advances and achievements of a variety of electrode materials for dual carbon and non-dual carbon KICs. Furthermore, electrolyte chemistry, binders as well as electrode/electrolyte interface, are summarized. Finally, existing challenges and perspectives on further development of KICs are also presented.

CelluPhot: Hybrid Cellulose-Bismuth Oxybromide Membrane for Pollutant Removal

The simultaneous removal of organic and inorganic pollutants from wastewater is a complex challenge and requires usually several sequential processes. Here, we demonstrate the fabrication of a hybrid material that can fulfill both tasks: (i) the adsorption of metal ions due to the negative surface charge, and (ii) photocatalytic decomposition of organic compounds. The bioinorganic hybrid membrane consists of cellulose fibers to ensure mechanical stability and of Bi₄O₅Br₂/BiOBr nanosheets. The composite is synthesized at low temperature of 115 °C directly on the cellulose membrane (CM) in order to maintain the carboxylic and hydroxyl groups on the surface that are responsible for the adsorption of metal ions. The composite can adsorb both Co(II) and Ni(II) ions and the kinetic study confirmed a good agreement of experimental data with the pseudo-second-order equation kinetic model. CM/Bi₄O₅Br₂/BiOBr showed higher affinity to Co(II) ions than to Ni(II) ions from diluted aqueous solutions. The bioinorganic composite demonstrates a synergistic effect in the photocatalytic degradation of rhodamine B (RhB) by exceeding the removal efficiency of single components. The fabrication of the biologic-inorganic interface was confirmed by various analytical techniques including scanning electron microscopy (SEM), scanning transmission electron microscopy with energy dispersive X-ray spectroscopy (STEM EDX) mapping, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The presented approach for controlled formation of the bioinorganic interface between natural material (cellulose) and nanoscopic inorganic materials of tailored morphology (Bi-O-Br system) enables the significant enhancement of materials functionality.