Modulation of endochondral development of the distal femoral condyle by mechanical loading

Effect of hip dysplasia on the development of the femoral head growth plate

Purpose

The purpose of this study was to observe whether developmental dysplasia of the hip (DDH) affects the development of the femoral head growth plate and to analyze the risk factors.

Methods

We selected female patients aged between 11 and 20 years with unilateral DDH and unclosed femoral head growth plate (s). The selected patients underwent anteroposterior radiography of the hip joint to compare the degree of development of the femoral head growth plate on both sides and to identify risk factors that affect the development of the growth plate in the femoral head.

Results

We included 48 female patients with unilateral DDH, with an average age of 14 years (range: 11.1-18.5 years) and an average BMI of 20.4 kg/m² (range: 15.5 kg/m²-27.9 kg/m²). Among them, 23 patients had earlier development of the femoral head growth plate on the affected side than on the healthy side, while the degree of development of the femoral head growth plate in 25 patients was the same as that on the contralateral side. When the Tönnis angle was greater than 29.5°C and/or the Reimers migration index was greater than 48.5%, there was a statistically significant difference in the acceleration of femoral head growth plate development.

Conclusion

An abnormal relative position of the acetabulum-femoral head caused by DDH can accelerate closure of the femoral head growth plate in immature female patients. The risk factors are a Tönnis angle greater than 29.5°C and/or Reimers migration index greater than 48.5%.

Computational model of endochondral ossification: Simulating growth of a long bone

Mechanical loading is a crucial factor in joint and bone development. Using a computational model, we investigated the role of mechanics on cartilage growth rate, ossification of the secondary center, formation of the growth plate, and overall bone shape. A computational algorithm was developed and implemented into finite element models to simulate the endochondral ossification for symmetric and asymmetric motion in a generic diarthrodial joint. Under asymmetric loading condition the secondary center ossifies asymmetrically leaning toward the external load and results in tilted growth plate. Also the mechanics seems to have greater influence in the early onset of the ossification of the secondary center rather than later progression of the center. While previous models have simulated select stages of skeletal development, our model can simulate growth and ossification during the entirety of post-natal development. Such computational models of skeletal development may provide insight into specific loading conditions that cause bone and joint deformities, and the required timing for rehabilitative repair.

Axial mechanical loading to ex vivo mouse long bone regulates endochondral ossification and endosteal mineralization through activation of the BMP-Smad pathway during postnatal growth

Mechanical loading contributes to bone development, growth, and metabolism. However, the mechanisms underlying long bone mineralization via changes in loading during the growth period are unclear. The aim of the present study was to investigate the regulatory mechanisms underlying endochondral ossification and endosteal mineralization by developing an ex vivo organ culture model with cyclic axial mechanical loads. The metacarpal bones of 3-week-old C57BL/6 mice were exposed to mechanical loading (0, 7.8, and 78 mN) for 1 h/day for 4 days. Histomorphometry revealed that axial mechanical loading regulated the thickness of the calcified zone in the growth plate and endosteal mineralization in the diaphysis in a load-dependent manner. Mechanical loading also resulted in load-dependent upregulation of endochondral ossification and bone mineralization-related genes, including bone morphogenetic protein 2 (Bmp2). Recombinant human BMP-2 administration caused similar changes in tissue structures. Conversely, inhibition of the BMP-Smad pathway diminished the stimulatory effects of mechanical loading and BMP-2 administration, suggesting that the effects of mechanical loading may be exerted through activation of the BMP-Smad pathway with the results of gene ontology and pathway analyses. Mechanical loading increased alkaline phosphatase activity and decreased carbonic anhydrase IX (Car9) mRNA expression, resulting in a significant pH increase in the culture supernatant. We hypothesize that, through activation of the BMP-Smad pathway, mechanical loading downregulates Car9, which may alkalize the local milieu, thereby inducing bone formation and long bone mineralization. Our results showed that cyclic axial mechanical loading increased endochondral ossification and endosteal mineralization in developing mouse long bones, which may have resulted from changes in the pH, ALP activity, and Pi/PPi of the extracellular environment. These findings advance our understanding of the regulation of mineralization mechanisms by mechanical loading mediated through activation of the BMP-Smad pathway.

The epiphyseal secondary ossification center: Evolution, development and function

Bone age is used widely by pediatricians to assess the skeletal maturity of a child and predict growth potential. This entails measuring the size of secondary ossification centers (SOCs), which develop with age in the ends of long bones, which are initially cartilaginous. However, little is presently known about the developmental biology, evolution and functional role of these skeletal elements. Here, we summarize the knowledge currently available in this area and discuss potential primary functions of the SOC.

Secondary ossification center induces and protects growth plate structure

Growth plate and articular cartilage constitute a single anatomical entity early in development but later separate into two distinct structures by the secondary ossification center (SOC). The reason for such separation remains unknown. We found that evolutionarily SOC appears in animals conquering the land - amniotes. Analysis of the ossification pattern in mammals with specialized extremities (whales, bats, jerboa) revealed that SOC development correlates with the extent of mechanical loads. Mathematical modeling revealed that SOC reduces mechanical stress within the growth plate. Functional experiments revealed the high vulnerability of hypertrophic chondrocytes to mechanical stress and showed that SOC protects these cells from apoptosis caused by extensive loading. Atomic force microscopy showed that hypertrophic chondrocytes are the least mechanically stiff cells within the growth plate. Altogether, these findings suggest that SOC has evolved to protect the hypertrophic chondrocytes from the high mechanical stress encountered in the terrestrial environment.

Regeneration of Osteochondral Defects Using Developmentally Inspired Cartilaginous Templates

IMPACT STATEMENT

Successfully treating osteochondral defects involves regenerating both the damaged articular cartilage and the underlying subchondral bone, in addition to the complex interface that separates these tissues. In this study, we demonstrate that a cartilage template, engineered using bone marrow-derived mesenchymal stem cells, can enhance the regeneration of such defects and promote the development of a more mechanically functional repair tissue. We also use a computational mechanobiological model to understand how joint-specific environmental factors, specifically oxygen levels and tissue strains, regulate the conversion of the engineered template into cartilage and bone in vivo.

Periodontal ligament stem/progenitor cells with protein-releasing scaffolds for cementum formation and integration on dentin surface

Purpose/Aim: Cementogenesis is a critical step in periodontal tissue regeneration given the essential role of cementum in anchoring teeth to the alveolar bone. This study is designed to achieve integrated cementum formation on the root surfaces of human teeth using growth factor-releasing scaffolds with periodontal ligament stem/progenitor cells (PDLSCs).

MATERIALS AND METHODS

Human PDLSCs were sorted by CD146 expression, and characterized using CFU-F assay and induced multi-lineage differentiation. Polycaprolactone scaffolds were fabricated using 3D printing, embedded with poly(lactic-co-glycolic acids) (PLGA) microspheres encapsulating connective tissue growth factor (CTGF), bone morphogenetic protein-2 (BMP-2), or bone morphogenetic protein-7 (BMP-7). After removing cementum on human tooth roots, PDLSC-seeded scaffolds were placed on the exposed dentin surface. After 6-week culture with cementogenic/osteogenic medium, cementum formation and integration were evaluated by histomorphometric analysis, immunofluorescence, and qRT-PCR.

RESULTS

Periodontal ligament (PDL) cells sorted by CD146 and single-cell clones show a superior clonogenecity and multipotency as compared with heterogeneous populations. After 6 weeks, all the growth factor-delivered groups showed resurfacing of dentin with a newly formed cementum-like layer as compared with control. BMP-2 and BMP-7 showed de novo formation of tissue layers significantly thicker than all the other groups, whereas CTGF and BMP-7 resulted in significantly improved integration on the dentin surface. The de novo mineralized tissue layer seen in BMP-7-treated samples expressed cementum matrix protein 1 (CEMP1). Consistently, BMP-7 showed a significant increase in CEMP1 mRNA expression.

CONCLUSION

Our findings represent important progress in stem cell-based cementum regeneration as an essential part of periodontium regeneration.

Growth plate stress distribution implications during bone development: a simple framework computational approach

Mechanical stimuli play a significant role in the process of long bone development as evidenced by clinical observations and in vivo studies. Up to now approaches to understand stimuli characteristics have been limited to the first stages of epiphyseal development. Furthermore, growth plate mechanical behavior has not been widely studied. In order to better understand mechanical influences on bone growth, we used Carter and Wong biomechanical approximation to analyze growth plate mechanical behavior, and explore stress patterns for different morphological stages of the growth plate. To the best of our knowledge this work is the first attempt to study stress distribution on growth plate during different possible stages of bone development, from gestation to adolescence. Stress distribution analysis on the epiphysis and growth plate was performed using axisymmetric (3D) finite element analysis in a simplified generic epiphyseal geometry using a linear elastic model as the first approximation. We took into account different growth plate locations, morphologies and widths, as well as different epiphyseal developmental stages. We found stress distribution during bone development established osteogenic index patterns that seem to influence locally epiphyseal structures growth and coincide with growth plate histological arrangement.

Three-dimensional printed multiphase scaffolds for regeneration of periodontium complex

Tooth-supporting periodontium forms a complex with multiple tissues, including cementum, periodontal ligament (PDL), and alveolar bone. In this study, we developed multiphase region-specific microscaffolds with spatiotemporal delivery of bioactive cues for integrated periodontium regeneration. Polycarprolactione-hydroxylapatite (90:10 wt%) scaffolds were fabricated using three-dimensional printing seamlessly in three phases: 100-μm microchannels in Phase A designed for cementum/dentin interface, 600-μm microchannels in Phase B designed for the PDL, and 300-μm microchannels in Phase C designed for alveolar bone. Recombinant human amelogenin, connective tissue growth factor, and bone morphogenetic protein-2 were spatially delivered and time-released in Phases A, B, and C, respectively. Upon 4-week in vitro incubation separately with dental pulp stem/progenitor cells (DPSCs), PDL stem/progenitor cells (PDLSCs), or alveolar bone stem/progenitor cells (ABSCs), distinctive tissue phenotypes were formed with collagen I-rich fibers especially by PDLSCs and mineralized tissues by DPSCs, PDLSCs, and ABSCs. DPSC-seeded multiphase scaffolds upon in vivo implantation yielded aligned PDL-like collagen fibers that inserted into bone sialoprotein-positive bone-like tissue and putative cementum matrix protein 1-positive/dentin sialophosphoprotein-positive dentin/cementum tissues. These findings illustrate a strategy for the regeneration of multiphase periodontal tissues by spatiotemporal delivery of multiple proteins. A single stem/progenitor cell population appears to differentiate into putative dentin/cementum, PDL, and alveolar bone complex by scaffold's biophysical properties and spatially released bioactive cues.

Regulation of PTHrP expression by cyclic mechanical strain in postnatal growth plate chondrocytes

Mechanical loading has been widely considered to be a crucial regulatory factor for growth plate development, but the exact mechanisms of this regulation are still not completely understood. In the growth plate, parathyroid hormone-related protein (PTHrP) regulates chondrocyte differentiation and longitudinal growth. Cyclic mechanical strain has been demonstrated to influence growth plate chondrocyte differentiation and metabolism, whereas the relationship between cyclic mechanical strain and PTHrP expression is not clear. The objective of this study was to investigate whether short-term cyclic tensile strain regulates PTHrP expression in postnatal growth plate chondrocytes in vitro and to explore whether the organization of cytoskeletal F-actin microfilaments is involved in this process. To this end, we obtained growth plate chondrocytes from 2-week-old Sprague-Dawley rats and sorted prehypertrophic and hypertrophic chondrocytes using immunomagnetic beads coated with anti-CD200 antibody. The sorted chondrocytes were subjected to cyclic tensile strain of varying magnitude and duration at a frequency of 0.5 Hz. We found that cyclic strain regulates PTHrP expression in a magnitude- and time-dependent manner. Incubation of chondrocytes with cytochalasin D, an actin microfilament-disrupting reagent, blocked the induction of PTHrP expression in response to strain. The results suggest that short-term cyclic tensile strain induces PTHrP expression in postnatal growth plate prehypertrophic and hypertrophic chondrocytes and that PTHrP expression by these chondrocytes may subsequently affect growth plate development. The results also support the idea that the organization of cytoskeletal F-actin microfilaments plays an important role in mechanotransduction.

Forward mandibular positioning enhances the expression of Ang-1 and Ang-2 in rabbit condylar chondrocytes

Functional appliances correct dental malocclusion, partly by exerting an indirect mechanical stimulus on the condylar cartilage, initiating novel bone formation in the condyle. Angiopoietin is involved in the angiogenesis associated with novel bone formation. This study aimed to determine the expression of angiopoietin (Ang)‑1 and ‑2 following forward mandibular positioning (FMP) in the condylar chondrocytes of rabbits. Sixty rabbits (age, 8 weeks) were randomly allocated to the experimental and control groups (n=30 per group). In the experimental group, FMP was induced by a functional appliance. Five rabbits from the experimental group and the control group were sacrificed following 3 days and 1, 2, 4, 8 and 12 weeks, respectively. The right temporomandibular joints (TMJs) were collected and the expression of Ang‑1 and -2 was evaluated by immunohistochemical staining. The expression of Ang-1 increased at day 3 and reached a peak at 2 weeks, whereas Ang‑2 reached maximal expression 4 weeks after FMP. Subsequently, the expression of Ang‑1 and ‑2 gradually decreased. Thus, FMP enhanced the expression of Ang‑1 and Ang‑2 in condylar cartilage, which is related to angiogenesis in the process of endochondral ossification.

Mechanical control of tissue-engineered bone

Bone is a load-bearing tissue and physical forces play key roles in the development and maintenance of its structure. Mechanical cues can stimulate the expression of an osteogenic phenotype, enhance matrix and mineral deposition, and influence tissue organization to improve the functional outcome of engineered bone grafts. In recent years, a number of studies have investigated the effects of biophysical forces on the bone formation properties of osteoprogenitor cells. The application of physiologically relevant stimuli to tissue-engineered bone may be determined through observation and understanding of forces to which osteoblasts, osteoclasts, and osteocytes are exposed in native bone. Subsequently, these cues may be parameterized and their effects studied in well-defined in vitro systems. The osteo-inductive effects of three specific mechanical cues - shear stress, substrate rigidity, and nanotopography - on cells cultured in monolayer or in three-dimensional biomaterial scaffolds in vitro are reviewed. Additionally, we address the time-dependent effects of mechanical cues on vascular infiltration and de novo bone formation in acellular scaffolds implanted into load-bearing sites in vivo. Recent studies employing cutting-edge advances in biomaterial fabrication and bioreactor design have provided key insights into the role of mechanical cues on cellular fate and tissue properties of engineered bone grafts. By providing mechanistic understanding, future studies may go beyond empirical approaches to rational design of engineering systems to control tissue development.

Skeletal biology over the life span: a view from the surfaces

The biocultural interpretation of skeletal remains is based upon the foundation of skeletal biology. In this review we examine the current state of skeletal biology research outside of the mainstream anthropology literature. The focus is on the structural changes of bone development and growth, and modeling and repair in the four bone surfaces: periosteal, Haversian, endosteal, and trabecular. The pattern of skeletal changes is placed within the framework of the human life span. New perspectives and direction of research on the environmental, biological, and genetic influences on modeling and remodeling processes are discussed chronologically at each bone surface. Implications for biological anthropologists are considered. This approach emphasizes variation in skeletal biology as a dynamic record of development, maturity, and aging.

Biophysical stimuli induced by passive movements compensate for lack of skeletal muscle during embryonic skeletogenesis

In genetically modified mice with abnormal skeletal muscle development, bones and joints are differentially affected by the lack of skeletal muscle. We hypothesise that unequal levels of biophysical stimuli in the developing humerus and femur can explain the differential effects on these rudiments when muscle is absent. We find that the expression patterns of four mechanosensitive genes important for endochondral ossification are differentially affected in muscleless limb mutants, with more extreme changes in the expression in the humerus than in the femur. Using finite element analysis, we show that the biophysical stimuli induced by muscle forces are similar in the humerus and femur, implying that the removal of muscle contractile forces should, in theory, affect the rudiments equally. However, simulations in which a displacement was applied to the end of the limb, such as could be caused in muscleless mice by movements of the mother or normal littermates, predicted higher biophysical stimuli in the femur than in the humerus. Stimuli induced by limb movement were much higher than those induced by the direct application of muscle forces, and we propose that movements of limbs caused by muscle contractions, rather than the direct application of muscle forces, provide the main mechanical stimuli for normal skeletal development. In muscleless mice, passive movement induces unequal biophysical stimuli in the humerus and femur, providing an explanation for the differential effects seen in these mice. The significance of these results is that forces originating external to the embryo may contribute to the initiation and progression of skeletal development when muscle development is abnormal.

A mechanobiological model of epiphysis structures formation

Developing bone consists of epiphysis, metaphysis and diaphysis. The secondary ossification centre (SOC) appears and grows within the epiphysis, involving two histological stages. Firstly, cartilage canals appear; they carry hypertrophy factors towards the central area of the epiphysis. Canal growth and expansion is modulated by stress on the epiphysis. Secondly, the diffusion of hypertrophy factors causes SOC growth. Hypertrophy is regulated by biological and mechanical factors present within the epiphysis. The finite element method has been used for solving a coupled system of differential equations for modelling these histological stages of epiphyseal development. Cartilage canal spatial-temporal growth patterns were obtained as well as the SOC formation pattern. This model qualitatively agreed with experimental results reported by other authors.

Modulating endochondral ossification of multipotent stromal cells for bone regeneration

For years it has been recognized that engineering of large bone constructs will be feasible only if the hurdle of vascularization is overcome. Attempts to engineer bone tissue have predominantly focused on intramembranous (direct) bone formation. A relatively new and most likely more physiological approach in this line is endochondral bone formation, comprising an intermediate cartilaginous stage. Cartilage in nature is an avascular tissue and its cells are equipped to survive the poor oxygenation and nutritional conditions inherent to implanted tissues. Subsequent terminal differentiation (hypertrophy) of the chondrocytes initiates the formation of a mineralized matrix that will then be converted into bone. Through this mechanism, our long bones grow and most fractures heal through the process of secondary fracture healing. The feasibility of the attractive concept of endochondral bone tissue engineering has already been shown. Most emphasis has gone to the multipotent stromal cells because of their great potential for expansion and differentiation and immunoprivileged nature. This review will focus on the promises and current status of this new field. Further, potent modulators of endochondral bone tissue engineering, including oxygen tension and mechanical stimuli, will be discussed.

Use of a bioactive scaffold for the repair of bone defects in a novel reproducible vertebral body defect model

Bone defects in vertebral bodies (VB) usually occur after the reduction of fractures or are caused by bone disease. Besides the treatment of original disease, repair of the bone defect can restore the structure of VB and improve stabilization of the spine to protect the spinal cord nerves. To aid studies of the efficacy of bioengineering techniques for repair of VB, we developed a rat model with a critical size bone defect in VB. Air-motivated burrs were used to create two sizes of bone defect (2 x 3 x 1.5 mm; 2 x 3 x 3 mm) in the anterior part of VB in 6-month-old Fischer 344 rats. Quantitative CT analyses and histological assays demonstrated that neither defects self-repaired by 8 weeks post surgery. Moreover, the tendency of bone formation was monitored in the same animal by serial CT image evaluations, allowing us to demonstrate that there was significant bone growth during the 4- to 6-week period after the creation of the bone defect. We then implanted sintered poly(lactic-co-glycolic acid) (PLGA) microsphere scaffolds loaded with Matrigel with or without recombinant human bone morphogenetic protein 2 (rhBMP2; 2.0 microg rhBMP2/10 microL Matrigel/scaffold) into the bone defect (2 x 3 x 3 mm) in the VB. Bone formation was detected by quantitative analyses of serial CT images, which demonstrated bone growth in rats that received the rhBMP2 implant, in both surrounding areas and inside area of the scaffold. In addition to a rapid increase within 2 weeks of the operation, another significant bone formation period was found between 4 and 8 weeks after the implantation. By contrast, the control group that received the implant without rhBMP2 did not show similar bone formation tendencies. The results of CT analyses were confirmed by histological studies. This study suggests that a critical size bone defect of the anterior VB can be developed in a rat model. Characterization of this model demonstrated that 4 to 6 weeks after creation of the defect was a significant bone growth period for VB bone repair in rats. This animal model has further utility for the study of different biomaterials for VB bone repair. Implantation of a bioactive PLGA scaffold carrying rhBMP2 allowed more successful repair of the VB defect. Although further characterization studies are needed, the bioactive PLGA scaffold developed in this study will likely adapt easily to other in vivo osteogenesis applications.

Functional scoliosis caused by leg length discrepancy

INTRODUCTION

Leg length discrepancy (LLD) causes pelvic obliquity in the frontal plane and lumbar scoliosis with convexity towards the shorter extremity. Leg length discrepancy is observed in 3-15% of the population. Unequalized lower limb length discrepancy leads to posture deformation, gait asymmetry, low back pain and discopathy.

MATERIAL AND METHODS

In the years 1998-2006, 369 children, aged 5 to 17 years (209 girls, 160 boys) with LLD-related functional scoliosis were treated. An external or internal shoe lift was applied.

RESULTS

Among 369 children the discrepancy of 0.5 cm was observed in 27, 1 cm in 329, 1.5 cm in 9 and 2 cm in 4 children. During the first follow-up examination, within 2 weeks, the adjustment of the spine to new static conditions was noted and correction of the curve in 316 examined children (83.7%). In 53 children (14.7%) the correction was observed later and was accompanied by slight low back pain. The time needed for real equalization of limbs was 3 to 24 months. The time needed for real equalization of the discrepancy was 11.3 months.

CONCLUSIONS

Leg length discrepancy equalization results in elimination of scoliosis. Leg length discrepancy < 2 cm is a static disorder; that is why measurements should be performed in a standing position using blocks of adequate thickness and the position of the posterior superior iliac spine should be estimated.

A mathematical model of epiphyseal development: hypothesis on the cartilage canals growth

The role of cartilage canals is to transport nutrients and biological factors that cause the appearance of the secondary ossification centre (SOC). The SOC appears in the centre of the epiphysis of long bones. The canal development is a complex interaction between mechanical and biological factors that guide its expansion into the centre of the epiphysis. This article introduces the 'Hypothesis on the growth of cartilage canals'. Here, we have considered that the development of these canals is an essential event for the appearance of SOC. Moreover, it is also considered to be important for the transport of molecular factors (RUNX2 and MMP9) at the ends of such canals. Once the canals are merged in the centre of the epiphysis, these factors are released causing hypertrophy of adjacent cells. This RUNX2 and MMP9 release occurs due to the action of mechanical loads that supports the epiphysis. In order to test this hypothesis, we use a hybrid approach using the finite element method to simulate the mechanical stresses present in the epiphysis and the cellular automata to simulate the expansion of the canals and the hypertrophy factors pathway. By using this hybrid approach, we have obtained as a result the spatial-temporal patterns for the growth of cartilage canals and hypertrophy factors within the epiphysis. The model is in qualitative agreement with experimental results previously reported by other authors. Thus, we conclude that this model may be used as a methodological basis to present a complete mathematical model of the processes involved in epiphyseal development.

Tissue formation and vascularization in anatomically shaped human joint condyle ectopically in vivo

Scale-up of bioengineered grafts toward clinical applications is a challenge in regenerative medicine. Here, we report tissue formation and vascularization of anatomically shaped human tibial condyles ectopically with a dimension of 20 x 15 x 15 mm(3). A composite of poly-epsilon-caprolactone and hydroxyapatite was fabricated using layer deposition of three-dimensional interlaid strands with interconnecting microchannels (400 microm) and seeded with human bone marrow stem cells (hMSCs) with or without osteogenic differentiation. An overlaying layer (1 mm deep) of poly(ethylene glycol)-based hydrogel encapsulating hMSCs or hMSC-derived chondrocytes was molded into anatomic shape and anchored into microchannels by gel infusion. After 6 weeks of subcutaneous implantation in athymic rats, hMSCs generated not only significantly more blood vessels, but also significantly larger-diameter vessels than hMSC-derived osteoblasts, although hMSC-derived osteoblasts yielded mineralized tissue in microchannels. Chondrocytes in safranin-O-positive glycosaminoglycan matrix were present in the cartilage layer seeded with hMSC-derived chondrogenic cells, although significantly more cells were present in the cartilage layer seeded with hMSCs than hMSC-derived chondrocytes. Together, MSCs elaborate substantially more angiogenesis, whereas their progenies yield corresponding differentiated tissue phenotypes. Scale up is probable by incorporating a combination of stem cells and their progenies in repeating modules of internal microchannels.

Mechanically induced osteogenic differentiation--the role of RhoA, ROCKII and cytoskeletal dynamics

Many biochemical factors regulating progenitor cell differentiation have been examined in detail; however, the role of the local mechanical environment on stem cell fate has only recently been investigated. In this study, we examined whether oscillatory fluid flow, an exogenous mechanical signal within bone, regulates osteogenic, adipogenic or chondrogenic differentiation of C3H10T1/2 murine mesenchymal stem cells by measuring Runx2, PPARgamma and SOX9 gene expression, respectively. Furthermore, we hypothesized that the small GTPase RhoA and isometric tension within the actin cytoskeleton are essential in flow-induced differentiation. We found that oscillatory fluid flow induces the upregulation of Runx2, Sox9 and PPARgamma, indicating that it has the potential to regulate transcription factors involved in multiple unique lineage pathways. Furthermore, we demonstrate that the small GTPase RhoA and its effector protein ROCKII regulate fluid-flow-induced osteogenic differentiation. Additionally, activated RhoA and fluid flow have an additive effect on Runx2 expression. Finally, we show RhoA activation and actin tension are negative regulators of both adipogenic and chondrogenic differentiation. However, an intact, dynamic actin cytoskeleton under tension is necessary for flow-induced gene expression.

Identification of mechanosensitive genes during embryonic bone formation

Although it is known that mechanical forces are needed for normal bone development, the current understanding of how biophysical stimuli are interpreted by and integrated with genetic regulatory mechanisms is limited. Mechanical forces are thought to be mediated in cells by “mechanosensitive” genes, but it is a challenge to demonstrate that the genetic regulation of the biological system is dependant on particular mechanical forces in vivo. We propose a new means of selecting candidate mechanosensitive genes by comparing in vivo gene expression patterns with patterns of biophysical stimuli, computed using finite element analysis. In this study, finite element analyses of the avian embryonic limb were performed using anatomically realistic rudiment and muscle morphologies, and patterns of biophysical stimuli were compared with the expression patterns of four candidate mechanosensitive genes integral to bone development. The expression patterns of two genes, Collagen X (ColX) and Indian hedgehog (Ihh), were shown to colocalise with biophysical stimuli induced by embryonic muscle contractions, identifying them as potentially being involved in the mechanoregulation of bone formation. An altered mechanical environment was induced in the embryonic chick, where a neuromuscular blocking agent was administered in ovo to modify skeletal muscle contractions. Finite element analyses predicted dramatic changes in levels and patterns of biophysical stimuli, and a number of immobilised specimens exhibited differences in ColX and Ihh expression. The results obtained indicate that computationally derived patterns of biophysical stimuli can be used to inform a directed search for genes that may play a mechanoregulatory role in particular in vivo events or processes. Furthermore, the experimental data demonstrate that ColX and Ihh are involved in mechanoregulatory pathways and may be key mediators in translating information from the mechanical environment to the molecular regulation of bone formation in the embryo.

While mechanical forces are known to be critical to adult bone maintenance and repair, the importance of mechanobiology in embryonic bone formation is less widely accepted. The influence of mechanical forces on cells is thought to be mediated by “mechanosensitive genes,” genes which respond to mechanical stimulation. In this research, we examined the situation in the developing embryo. Using finite element analysis, we simulated the biophysical stimuli in the developing bone resulting from spontaneous muscle contractions, incorporating detailed morphology of the developing chick limb. We compared patterns of stimuli with expression patterns of a number of genes involved in bone formation and demonstrated a clear colocalisation in the case of two genes (Ihh and ColX). We then altered the mechanical environment of the growing chick embryo by blocking muscle contractions and demonstrated changes in the magnitudes and patterns of biophysical stimuli and in the expression patterns of both Ihh and ColX. We have demonstrated the value of combining computational techniques with in vivo gene expression analysis to identify genes that may play a mechanoregulatory role and have identified genes that respond to mechanical stimulation during bone formation in vivo.

The destruction evaluation in different foot joints: new ideas in collagen-induced arthritis rat model

Collagen-induced arthritis (CIA) has been widely used as the animal model of rheumatoid arthritis since 1977, while till now, no paper has depicted the destruction characteristics in different foot joints. In this study, we observed the differences among the foot joint destruction process of CIA to elucidate further the pathological process of this model. CIA was induced in male Wistar rat immunized with bovine type II collagen and Freund's incomplete adjuvant. Radiological studies were performed 1, 2, 4, 6, and 8 months after the second immunization to follow the development of disease. At last, all the animals were killed and histological research was performed. In the histological observation, three main types of joint destructions such as subchondral side erosion, external joint erosion and the cartilaginous fusion of articular cartilage were identified. All these destruction forms exist in one joint or several different joints. Furthermore, we found that tartrate-resistant acid phosphatase (TRAP) stain-positive cells participated in the destruction of articular cartilage. These new findings showed that in the disease process of the CIA model, different foot joints show different destruction characteristics and cartilaginous fusion of foot joints is another typical pathological characteristic.

Age and pattern of the onset of differential growth among growth plates in rats

Differential growth is the phenomenon whereby growth plates in the same individual at the same time all have uniquely different axial growth velocities. Differential growth is clearly present in the adolescent skeleton. In this study we ask two questions. When and by what pattern does the phenomenon of differential growth begin? Second, to what extent are the development of differential growth velocities correlated with changes in hypertrophic chondrocyte volume and/or with changes in chondrocytic production/turnover? Four growth plates (proximal and distal radial; proximal and distal tibial) were studied at 24 different time points in Long-Evans rats between the 17th gestational day (when differential growth does not exist) and postnatal day 27 (when differential growth is well established). Growth velocities were measured using fluorochrome labeling. Using stereological methodology, multiple chondrocytic kinetic parameters were measured for all growth plates. Elongation of the proximal radial growth plate decreases relative to elongation in the other three growth plates in the late fetal phase. Differential growth is fully expressed at postnatal day 13 when the other three growth plates start to decrease daily elongation at different rates. Differential growth is primarily associated with differences in hypertrophic cell volume manifested when growth deceleration occurs. This study also illustrates that differential growth is superimposed on systemic regulators that affect all growth plates simultaneously. The most dramatic illustration of this is the sharp decline in growth velocity in all four growth plates that occurs perinatally.

Cartilage matrix changes in the developing epiphysis: early events on the pathway to equine osteochondrosis?

REASONS FOR PERFORMING STUDY

The earliest osteochondrosis (OC) microscopic lesion reported in the literature was present in the femorotibial joint of a 2-day-old foal suggesting that OC lesions and factors initiating them may arise prior to birth.

OBJECTIVE

To examine the developing equine epiphysis to detect histological changes that could be precursors to OC lesions.

METHODS

Osteochondral samples from 21 equine fetuses and 13 foals were harvested from selected sites in the scapulohumeral, humeroradial, metacarpophalangeal, femoropatellar, femorotibial, tarsocrural and metatarsophalangeal joints. Sections were stained with safranin O and picrosiruis red to assess cartilage changes and structural arrangement of the collagen matrix.

RESULTS

Extracellular matrix changes observed included perivascular areas of paleness of the proteoglycan matrix associated with hypocellularity and, sometimes, necrotic chondrocytes. These changes were most abundant in the youngest fetuses and in the femoropatellar/femorotibial (FP/FT) joints. Indentations of the ossification front were also observed in most specimens, but, most frequently, in scapulohumeral and FP/FT joints. A cartilage canal was almost always present in these indentations. The vascular density of the cartilage was higher in the youngest fetuses. In these fetuses, the most vascularised joints were the metacarpo- and metatarsophalangeal joints but their cartilage canals regressed quickly. After birth, the most vascularised cartilage was present in the FP/FT joint. Articular cartilage differentiated into 4 zones early in fetal life and the epiphyseal cartilage also had a distinct zonal cartilage structure. A striking difference was observed in the collagen structure at the junction of the proliferative and hypertrophic zones where OCD lesions occur.

CONCLUSION

Matrix and ossification front changes were frequently observed and significantly associated with cartilage canals suggesting that they may be physiological changes associated with matrix remodelling and development. The collagen structure was variable through the growing epiphysis and a differential in biomechanical properties at focal sites may predispose them to injury.

Vascularized adipose tissue grafts from human mesenchymal stem cells with bioactive cues and microchannel conduits

Vascularization is critical to the survival of engineered tissues. This study combined biophysical and bioactive approaches to induce neovascularization in vivo. Further, we tested the effects of engineered vascularization on adipose tissue grafts. Hydrogel cylinders were fabricated from poly(ethylene glycol) diacrylate (PEG) in four configurations: PEG alone, PEG with basic fibroblast growth factor (bFGF), microchanneled PEG, or both bFGF-adsorbed and microchanneled PEG. In vivo implantation revealed no neovascularization in PEG, but substantial angiogenesis in bFGF-adsorbed and/or microchanneled PEG. The infiltrating host tissue consisted of erythrocyte-filled blood vessels lined by endothelial cells, and immunolocalized to vascular endothelial growth factor (VEGF). Human mesenchymal stem cells were differentiated into adipogenic cells, and encapsulated in PEG with both microchanneled and adsorbed bFGF. Upon in vivo implantation subcutaneously in immunodeficient mice, oil red O positive adipose tissue was present and interspersed with interstitial fibrous (IF) capsules. VEGF was immunolocalized in the IF capsules surrounding the engineered adipose tissue. These findings suggest that bioactive cues and/or microchannels promote the genesis of vascularized tissue phenotypes such as the tested adipose tissue grafts. Especially, engineered microchannels may provide a generic approach for modifying existing biomaterials by providing conduits for vascularization and/or diffusion.

Tissue engineering and developmental biology: going biomimetic

This article contains the collective views expressed at the first session of the workshop "Tissue Engineering--The Next Generation," which was devoted to the interactions between developmental biology and tissue engineering. Donald Ingber discussed the chasms between developmental biology and tissue engineering from the perspective of a cell biologist who has had interest in tissue engineering since its early days. Van C. Mow shared a historical perspective on the development of tissue engineering as one of the first engineers involved in the field. David Butler offered an assessment of functional tissue engineering, a new area he helped establish and promote. Laura Niklason discussed how to be more effective in developing cellular therapies for large numbers of patients. Johnny Huard described his approach to tissue engineering, based on the use of muscle-derived cells. Jeremy Mao focused on cell homing and cell density in the context of native development and relevance to tissue engineering. Ioannis Yannas proposed a set of "rules" in organ regeneration. Collectively, the faculty expressed a remarkable level of enthusiasm for bridging the gaps between developmental biology and tissue engineering and offered new ideas on how to facilitate the interaction between the two fields.

Modulation of neonatal growth plate development by ex vivo intermittent mechanical stress

Although growth plate response to mechanical stress has been increasingly studied, our understanding of mechanical modulation of neonatal growth plate is incomplete, especially concerning biochemical changes. This study was designed to explore the cellular and biochemical responses of the cranial base growth plate (CBGP) explant upon cyclic loading. The growth plate with subchondral bone was aseptically isolated from each of 24 neonatal rabbits and fixated in an organ culture system. Cyclic loading was applied to growth plate explants at 200 mN and 1 Hz for 60 min (N=12), whereas control explants were immersed in organ culture for 60 min without mechanical loading (N=12). Computerized image analysis revealed that cyclic loading induced significantly more proliferating chondrocytes than unloaded controls (p<0.001), as well as significantly higher growth plate height at 856+/-30 microm than the unloaded controls at 830+/-36 microm (p<0.05). Immunoblotting with monoclonal antibodies (mAb) disclosed that the average mAb binding area for chondroitin sulfate was significantly higher in the loaded specimens than the unloaded controls at (p<0.001). The average mAb binding area for keratan sulfate was also significantly higher in the loaded specimens than the unloaded controls (p<0.01). Biochemical analysis showed that the average total hyaluronan content of loaded specimens at 0.25+/-0.06 microg/microg DNA was significantly higher than the unloaded controls at 0.09+/-0.05 microg/microg DNA (p<0.01). Taken together, these data suggest that brief doses of cyclic, intermittent forces activate cellular and molecular responses in the CBGP ex vivo. Whether hyaluronan-mediated pathway is involved in the biological responses of growth plate to mechanical loading warrants additional investigations.

Mechanobiology of embryonic limb development

Considerable evidence exists to support the hypothesis that mechanical forces have an essential role in healthy embryonic skeletal development. Clinical observations and experimental data indicate the importance of muscle contractions for limb development. However, the influence of these forces is seldom referred to in biological descriptions of bone development, and perhaps this is due to the fact that the hypothesis that mechanical forces are essential for normal embryonic skeletal development is difficult to test and elaborate experimentally in vivo, particularly in humans. Computational modeling has the potential to address this issue by simulating embryonic growth under a range of loading conditions but the potential of such models has yet to be fully exploited. In this article, we review the literature on mechanobiology of limb development in three main sections: (a) experimental alteration of the mechanical environment, (b) mechanical properties of embryonic tissues, and (c) the use of computational models. Then we analyze the main issues, and suggest how experimental and computational fields could work closer together to enhance our understanding of mechanobiology of the embryonic skeleton.

Microvascular adaptation to growth in rat humeral head

The aim of this work is to investigate the growth of the vasculature in the rat humeral head cartilage after the initial development of the secondary ossification centre until the adult organization. Rats aging from 5 weeks to 12 months were used. Histological observations on humeral heads were implemented with morphometrical analysis. Subsequently, vascular corrosion cast, that permits a three-dimensional observation of the vasculature, were prepared and observed by scanning electron microscopy. In young animals the epiphysis contains thin bone trabeculae and most of the epiphysis is occupied by bone marrow spaces. With age, the bone trabeculae progressively enlarge up to double their thickness. The percentage of bone tissue increases from 33.6 to 58.6% of the entire epiphysis, while the bone marrow spaces tend to increase very little in their mean dimension. Vascular corrosion casts show that the epiphyseal microcirculation is well distinguished from that of the diaphysis, and arises from the vessels present in the capsule and the periosteal networks. In young animals the only capillaries are bone marrow sinusoids and few subchondral capillaries. In adult animals small vessels run between the clusters of sinusoids forming the trabecular circulation. Capillary sprouts from sinusoids are always observed both in the young and adult animals. Thus, in adult rats different proper microcirculatory districts can be distinguished in the epiphysis: (a) the sinusoidal network, that supplies the hematopoiesis of the bone marrow and the adjacent osteogenic tissue; (b) the bone tissue microcirculation, limited to small vessels that supply the metabolism and the remodelling of the bone tissue. The reported microvascular organization and its adaptation to the epiphyseal growth represent the morphological basis for understanding the reciprocal interaction among the different tissues in developing and adult rat epiphysis.

Matrix and gene expression in the rat cranial base growth plate

Recent data have shown that the proliferation and differentiation of the cranial base growth plate (CBGP) chondrocytes are modulated by mechanical stresses. However, little is known about the expression of genes and matrix molecules in the CBGP during development or under mechanical stresses. The objective of the present study was to determine whether several cartilage- and bone-related molecules are expressed in the CBGP and whether their expression is modulated by cyclic loading. The CBGP of normal 8-day-old rats (n=8) were isolated immediately after death, followed by extraction of total RNA and reverse transcription/polymerase chain reaction (RT-PCR) analysis. All studied genes, including type II and X collagens, biglycan, versican, osteocalcin, osteopontin, and fetal liver kinase 1, were expressed in the CBGP with a reproducible absence of decorin mRNA. In age- and sex-matched rats (n=10), exogenous cyclic forces were applied to the maxilla at 500 mN and 4 Hz for 20 min/day over 2 days, followed by RNA isolation and RT-PCR analysis. This exogenous cyclic loading consistently induced the expression of the decorin gene, which was non-detectable, by the current RT-PCR approach, in control neonatal CBGPs without loading. Immunolocalization of several of the above-studied gene products demonstrated their remarkable site-specific expression. Decorin proteoglycan was primarily expressed in the perichondrium instead of various cartilage growth zones, especially upon mechanical loading. These findings serve as baseline data for the expression of several genes and gene products in the neonatal CBGP. Mechanical modulation of decorin expression is consistent with recent reports of its susceptibility to mechanical loading in several connective tissues.