Compartmental absorption modeling and site of absorption studies to determine feasibility of an extended-release formulation of an HIV-1 attachment inhibitor phosphate ester prodrug

Current status of the small molecule anti-HIV drugs in the pipeline or recently approved

Human Immunodeficiency Virus (HIV) is the causative agent of Acquired Immunodeficiency Syndrome (AIDS) with high morbidity and mortality rates. Treatment of AIDS/HIV is being complicated by increasing resistance to currently used antiretroviral (ARV) drugs, mainly in low- and middle-income countries (LMICs) due to drug misuse, poor drug supply and poor treatment monitoring. However, progress has been made in the development of new ARV drugs, targeting different HIV components (Fig. 1). This review aims at presenting and discussing the progress made towards the discovery of new ARVs that are at different stages of clinical trials as of July 2024. For each compound, the mechanism of action, target biomolecule, genes associated with resistance, efficacy and safety, class, and phase of clinical trial are discussed. These compounds include analogues of nucleoside reverse transcriptase inhibitors (NRTIs) - islatravir and censavudine; non-nucleoside reverse transcriptase inhibitors (NNRTIs) - Rilpivirine, elsulfavirine and doravirine; integrase inhibitors namely cabotegravir and dolutegravir and chemokine coreceptors 5 and 2 (CC5/CCR2) antagonists for example cenicriviroc. Also, fostemsavir is being developed as an attachment inhibitor while lenacapavir, VH4004280 and VH4011499 are capsid inhibitors. Others are maturation inhibitors such as GSK-254, GSK3532795, GSK3739937, GSK2838232, and other compounds labelled as miscellaneous (do not belong to the classical groups of anti-HIV drugs or to the newer classes) such as obefazimod and BIT225. There is a considerable progress in the development of new anti-HIV drugs and the effort will continue since HIV infections has no cure or vaccine till now. Efforts are needed to reduce the toxicity of available drugs or discover new drugs with new classes which can delay the development of resistance.

No dose adjustment of metformin or substrates of organic cation transporters (OCT)1 and OCT2 and multidrug and toxin extrusion protein (MATE)1/2K with fostemsavir coadministration based on modeling approaches

Fostemsavir is an approved gp120-directed attachment inhibitor and prodrug for the treatment of human immunodeficiency virus type 1 infection in combination with other antiretrovirals (ARVs) in heavily treatment-experienced adults with multi-drug resistance, intolerance, or safety concerns with their current ARV regimen. Initial in vitro studies indicated that temsavir, the active moiety of fostemsavir, and its metabolites, inhibited organic cation transporter (OCT)1, OCT2, and multidrug and toxin extrusion transporters (MATEs) at tested concentration of 100 uM, although risk assessment based on the current Food and Drug Administration in vitro drug-drug interaction (DDI) guidance using the mechanistic static model did not reveal any clinically relevant inhibition on OCTs and MATEs. However, a DDI risk was flagged with EMA static model predictions. Hence, a physiologically based pharmacokinetic (PBPK) model of fostemsavir/temsavir was developed to further assess the DDI risk potential of OCT and MATEs inhibition by temsavir and predict changes in metformin (a sensitive OCT and MATEs substrate) exposure. No clinically relevant impact on metformin concentrations across a wide range of temsavir concentrations was predicted; therefore, no dose adjustment is recommended for metformin when co-administered with fostemsavir.

Development of an extended action fostemsavir lipid nanoparticle

An extended action fostemsavir (FTR) lipid nanoparticle (LNP) formulation prevents human immunodeficiency virus type one (HIV-1) infection. This FTR formulation establishes a drug depot in monocyte-derived macrophages that extend the drug's plasma residence time. The LNP's physicochemical properties improve FTR's antiretroviral activities, which are linked to the drug's ability to withstand fluid flow forces and levels of drug cellular internalization. Each is, in measure, dependent on PEGylated lipid composition and flow rate ratios affecting the size, polydispersity, shape, zeta potential, stability, biodistribution, and antiretroviral efficacy. The FTR LNP physicochemical properties enable the drug-particle's extended actions.

Development of a physiologically based pharmacokinetic model of fostemsavir and its pivotal application to support dosing in pregnancy

It is critical to understand the impact of significant physiological changes during pregnancy on the extent of maternal and fetal drug exposure. Fostemsavir (FTR) is a prodrug of temsavir (TMR) and is approved in combination with other antiretrovirals for multi-drug-resistant human immunodeficiency virus (HIV) infections. This physiologically based pharmacokinetic model (PBPK) study was used to estimate TMR PK in pregnant populations during each trimester of pregnancy to inform FTR dosing. A PBPK model was developed and validated for TMR using PK data collected following intravenous TMR and oral FTR dosing (immediate-release and extended-release tablets) in healthy volunteers. Predicted TMR concentration-time profiles accurately predicted the reported clinical data and variability in healthy (dense data) and pregnant (sparse data) populations. Predicted versus observed TMR geometric mean (CV%) clearance following intravenous administration was 18.01 (29) versus 17 (21) (L/h). Predicted versus observed TMR AUC0-inf (ng.h/mL) in healthy volunteers following FTR administration of the extended-release tablet were 9542 (66) versus 7339 (33). The validated TMR PBPK model was then applied to predict TMR PK in a population of pregnant individuals during each trimester. Simulations showed TMR AUC in pregnant individuals receiving FTR 600 mg twice daily was decreased by 25% and 38% in the second and third trimesters, respectively. However, TMR exposure remained within the range observed in nonpregnant adults with no need for dose adjustment. The current PBPK model can also be applied for the prediction of local tissue concentrations and drug-drug interactions in pregnancy.

Mechanism of action, resistance, interaction, pharmacokinetics, pharmacodynamics, and safety of fostemsavir

The Food and Drug Administration (FDA) has licensed many antiretroviral medications to treat human immunodeficiency virus type 1 (HIV-1), however, treatment options for people with multi-drug resistant HIV remain limited. Medication resistance, undesirable effects, prior tolerance, and previous interlacement incapacity to deliver new drug classes all lead to the requirement for new medication classes and drug combination therapy. Fostemsavir (FTR) is a new CD-4 attachment inhibitor medicine that was recently authorized by the United States FDA to treat HIV-1. In individuals with multidrug-resistant (MDR) HIV-1, FTR is well tolerated and virologically active. According to recent investigations, drug combination therapy can positively affect MDR-HIV. The mechanism of action, resistance, interaction, pharmacokinetics, pharmacodynamics, and safety of FTR has been highlighted in this review.

Model-Based Dose Selection of Fostemsavir for Pediatric Populations With Multidrug-Resistant HIV-1 and Relative Bioavailability Assessment in Healthy Adults

Fostemsavir, a prodrug of the first-in-class HIV-1 attachment inhibitor temsavir, is approved for the treatment of multidrug-resistant HIV-1 in adults; its use in pediatric populations is currently being studied. Population pharmacokinetic modeling across pediatric weight bands was used to guide pediatric fostemsavir dose selection. Dosing simulations demonstrated that twice-daily fostemsavir 600-mg (adult dose) and 400-mg doses met safety and efficacy criteria for 35 kg or greater and 20 or greater to less than 35 kg pediatric weight bands, respectively. Temsavir relative bioavailability of 2 low-dose fostemsavir extended-release formulations (3 × 200 mg; formulations A and B) and reference formulation (600 mg extended release) was assessed in a 2-part, open-label, randomized, crossover study in healthy adults. Part 1 (N = 32) compared single-dose temsavir relative bioavailability, and Part 2 (N = 16) evaluated the impact of fed versus fasted conditions using the selected low-dose formulation. Temsavir geometric mean ratios for the area under the plasma concentration-time curve from time zero to infinity and maximum concentration for formulation B were bioequivalent to the reference formulation. Temsavir maximum concentration for formulation B was similar in fed and fasted states, but area under the plasma concentration-time curve from time zero to infinity geometric mean ratio was increased under fed conditions, consistent with previous results in adults. These analyses demonstrated efficient pediatric dose selection using a model-based approach.

Physiologically Based Biopharmaceutics Modeling of regional and colon absorption in humans

Colon absorption is a key determinant for successful development of extended release and colon targeted drug products. This is the first systematic evaluation of the ability to predict in vivo regional differences in absorption and the extent of colon absorption in humans using mechanistic physiologically based biopharmaceutics modeling (PBBM). A new dataset, consisting of 19 drugs with a wide range of biopharmaceutics properties and extent of colon absorption in humans, was established. Mechanistic predictions of the extent of absorption and plasma exposure after oral, or jejunal and direct colon administration were performed in GastroPlus and GI-Sim using an a priori approach. Two new colon models developed in GI-Sim, were also evaluated to assess if the prediction performance could be improved. Both GastroPlus and GI-Sim met the pre-defined criteria for accurate predictions of regional and colon absorption for high permeability drugs irrespective of formulation type, while the prediction performance was poor for low permeability drugs. For solutions, the two new GI-Sim colon models improved the colon absorption prediction performance for the low permeability drugs while maintaining the accurate prediction performance for the high permeability drugs. In contrast, the prediction performance decreased for non-solutions using the two new colon models. In conclusion, PBBM can be used with sufficient accuracy to predict regional and colon absorption in humans for high permeability drugs in candidate selection as well as early design and development of extended release or colon targeted drug products. The prediction performance of the current models needs to be improved to allow high accuracy predictions for commercial drug product applications including highly accurate predictions of the entire plasma concentration-time profiles as well as for low permeability drugs.

Development and validation of a liquid chromatography coupled to tandem mass spectrometry method for the monitoring of temsavir plasma concentrations in people living with HIV

A majority of people living with HIV (PLWH) now have access to HIV treatment with high antiviral potency and favorable tolerability profile. However, in some treatment experienced PLWH viral strains resistant to major current classes of antiretrovirals have emerged, usually due to periods with continued virus replication in the presence of failing drug regimens and thus selection pressure. In such context, new treatment options are therefore needed. Fostemsavir (RUKOBIA®) is the prodrug of temsavir, a first-in-class oral attachment inhibitor approved for the treatment of heavily treatment-experienced adults with multidrug-resistant HIV-1 infection. In this case RUKOBIA® is part of a complex regimen of antiretroviral drugs, often in addition to other drugs for chronic co-morbidities (e.g., heart disease, diabetes mellitus, hepatic and renal impairment, etc). In such a multi-drug regimen context, therapeutic drug monitoring (TDM) of temsavir can be necessary to exclude or adjust for relevant drug-drug interactions. A highly selective assay by liquid chromatography method coupled to tandem mass spectrometry (LC-MS/MS) was therefore developed for the quantification of temsavir in human plasma. A convenient sample preparation using protein precipitation with acetonitrile followed by supernatant dilution was carried out. Temsavir and fostemsavir were separated in less than 2 min using a multi-step UPLC gradient, thus ensuring adequate quantification of temsavir. The assay for the quantification of temsavir was extensively validated over the large range of clinically relevant concentrations from 1 to 10,000 ng/mL, in accordance with international bioanalytical method guidelines. The method achieves excellent performance in terms of trueness (99.7 - 105.3%), repeatability and intermediate precision (both from 1.6% to 5.8%). This LC-MS/MS method is now part of the routine analyses of the Laboratory of the Service of Clinical Pharmacology of Lausanne (CHUV), Switzerland, as an integrated part of our general TDM Service for antiretrovirals.

Fostemsavir and ethinyl estradiol drug interaction: Clinical recommendations for co‐administration

OBJECTIVES

Fostemsavir, a prodrug of temsavir, is indicated for heavily treatment-experienced adults with multidrug-resistant HIV-1 infection, antiretroviral (ARV) intolerance, or safety considerations. Understanding drug-drug interactions (DDIs) is important in individuals taking fostemsavir with hormonal contraceptives or menopausal or gender-affirming hormonal therapies.

METHODS

Effect of temsavir (active moiety) on the pharmacokinetics of ethinyl estradiol (EE) and norethindrone (NET) was evaluated in an open-label, single-sequence, four-cycle, four-treatment study in 26 healthy female participants (study 206279, NCT02480881). Relevant ARV-contraceptive interaction studies and guideline recommendations were reviewed; that information was then applied to other contraceptive methods and hormone-based therapies to predict the impact of fostemsavir co-administration.

RESULTS

Temsavir increased EE concentrations by 40% and had no effect on NET concentrations. Fostemsavir co-administration with hormone therapy is not expected to impact hormone treatment efficacy. Fostemsavir did not impact progestin; therefore, progestin-only and non-hormonal contraceptives will not be impacted by fostemsavir. Recommendations for co-administration of fostemsavir and hormonal contraceptives or menopausal or gender-affirming hormone therapies are based upon known and predicted DDIs, ensuring adequate hormonal concentrations to maintain the target effect.

CONCLUSIONS

Applying the results of Study 206279 and other relevant ARV-contraceptive studies, we recommend that when co-administering fostemsavir with combined oral contraceptives (COCs) and other oestrogen-based therapies, EE dose should not exceed 30 μg or equivalent, and caution is advised in the case of individuals with risk factors for thromboembolic events. Other oestrogen-based therapies may be co-administered with fostemsavir, with monitoring of oestrogen concentrations and appropriate dose adjustments. No impact of fostemsavir on COC efficacy is expected.

The Use of Physiologically Based Pharmacokinetic Analyses-in Biopharmaceutics Applications -Regulatory and Industry Perspectives

The use of physiologically based pharmacokinetic (PBPK) modeling to support the drug product quality attributes, also known as physiologically based biopharmaceutics modeling (PBBM) is an evolving field and the interest in using PBBM is increasing. The US-FDA has emphasized on the use of patient centric quality standards and clinically relevant drug product specifications over the years. Establishing an in vitro in vivo link is an important step towards achieving the goal of patient centric quality standard. Such a link can aid in constructing a bioequivalence safe space and establishing clinically relevant drug product specifications. PBBM is an important tool to construct a safe space which can be used during the drug product development and lifecycle management. There are several advantages of using the PBBM approach, though there are also a few challenges, both with in vitro methods and in vivo understanding of drug absorption and disposition, that preclude using this approach and therefore further improvements are needed. In this review we have provided an overview of experience gained so far and the current perspective from regulatory and industry point of view. Collaboration between scientists from regulatory, industry and academic fields can further help to advance this field and deliver on promises that PBBM can offer towards establishing patient centric quality standards.

Re-writing Oral Pharmacokinetics Using Physiologically Based Finite Time Pharmacokinetic (PBFTPK) Models

PURPOSE

To develop physiologically based finite time pharmacokinetic (PBFTPK) models for the analysis of oral pharmacokinetic data.

METHODS

The models are based on the passive drug diffusion mechanism under the sink conditions principle. Up to three drug successive input functions of constant rate operating for a total time τ are considered. Differential equations were written for all these models assuming linear one- or two-compartment-model disposition. The differential equations were solved and functions describing the concentration of drug as a function of time for the central and the peripheral compartment were derived. The equations were used to generate simulated data and they were also fitted to a variety of experimental literature oral pharmacokinetic data.

RESULTS

The simulated curves resemble real life data. The end of the absorption processes τ is either equal to t_max or longer than t_max at the descending portion of the concentration time curve. Literature oral pharmacokinetic data of paracetamol, ibuprofen, almotriptan, cyclosporine (a total of four sets of data), and niraparib were analyzed using the PBFTPK models. Estimates for τ corresponding to a single or two or three different in magnitude input rates were derived along with the other model parameters for all data analyzed.

CONCLUSIONS

The PBFTPK models are a powerful tool for the analysis of oral pharmacokinetic data since they rely on the physiologically sound concept of finite absorption time.

Pharmacokinetics of Temsavir, the Active Moiety of the HIV-1 Attachment Inhibitor Prodrug, Fostemsavir, Coadministered with Cobicistat, Etravirine, Darunavir/Cobicistat, or Darunavir/Ritonavir with or without Etravirine in Healthy Participants

Fostemsavir is a prodrug of temsavir, a first-in-class attachment inhibitor that binds directly to HIV-1 gp120, preventing initial viral attachment and entry into host CD4⁺ T cells with demonstrated efficacy in phase 2 and 3. Temsavir is a P-glycoprotein and breast cancer resistance protein (BCRP) substrate; its metabolism is mediated by esterase and CYP3A4 enzymes. Drugs that induce or inhibit CYP3A, P-glycoprotein, and BCRP may affect temsavir concentrations. Understanding potential drug-drug interactions (DDIs) following fostemsavir coadministration with antiretrovirals approved for HIV-1-infected treatment-experienced patients, including darunavir plus cobicistat (DRV/c) or DRV plus low-dose ritonavir (DRV/r) and etravirine, is clinically relevant. Open-label, single-sequence, multiple-dose, multicohort DDI studies were conducted in healthy participants (n = 46; n = 32). The primary objective was to assess the effects of DRV/r, etravirine, DRV/r plus etravirine, cobicistat, and DRV/c on temsavir systemic exposures; safety was a secondary objective. Compared with fostemsavir alone, coadministration with DRV/r increased the temsavir maximum observed plasma concentration (C_max), area under the concentration-time curve in one dosing interval (AUC_tau), and plasma trough concentration (C_tau) by 52%, 63%, and 88%, respectively, while etravirine decreased the temsavir C_max, AUC_tau, and C_tau by ∼50% each. DRV/r plus etravirine increased the temsavir C_max, AUC_tau, and C_tau by 53%, 34%, and 33%, respectively. Compared with fostemsavir alone, coadministration with cobicistat increased the temsavir C_max, AUC_tau, and C_tau by 71%, 93%, and 136%, respectively; DRV/c increased the temsavir C_max, AUC_tau, and C_tau by 79%, 97%, and 124%, respectively. Fostemsavir with all combinations was generally well tolerated. No dose adjustment is required for fostemsavir when coadministered with strong CYP3A inhibitors, P-glycoprotein inhibitors, and modest inducers, including regimens with DRV/r, DRV/c, cobicistat, etravirine, and DRV/r plus etravirine based on the therapeutic margin for temsavir (ClinicalTrials.gov registration no. NCT02063360 and NCT02277600).

Innovation in the discovery of the HIV-1 attachment inhibitor temsavir and its phosphonooxymethyl prodrug fostemsavir

The discovery and development of fostemsavir (2), the tromethamine salt of the phosphonooxymethyl prodrug of temsavir (1), encountered significant challenges at many points in the preclinical and clinical development program that, in many cases, stimulated the implementation of innovative solutions in order to enable further progression. In the preclinical program, a range of novel chemistry methodologies were developed during the course of the discovery effort that enabled a thorough examination and definition of the HIV-1 attachment inhibitor (AI) pharmacophore. These discoveries helped to address the challenges associated with realizing a molecule with all of the properties necessary to successfully advance through development and this aspect of the program is the major focus of this retrospective. Although challenges and innovation are not unusual in drug discovery and development programs, the HIV-1 AI program is noteworthy not only because of the serial nature of the challenges encountered along the development path, but also because it resulted in a compound that remains the first and only example of a mechanistically novel class of HIV-1 inhibitor that is proving to be very beneficial for controlling virus levels in highly treatment-experienced HIV-1 infected patients.

Revising Pharmacokinetics of Oral Drug Absorption: II Bioavailability-Bioequivalence Considerations

PURPOSE

To explore the application of the parameters of the physiologically based finite time pharmacokinetic (PBFTPK) models subdivided in first-order (PBFTPK)₁ and zero-order (PBFTPK)₀ models to bioavailability and bioequivalence. To develop a methodology for the estimation of absolute bioavailability, F, from oral data exclusively.

METHODS

Simulated concentration time data were generated from the Bateman equation and compared with data generated from the (PBFTPK)₁ and (PBFTPK)₀ models. The blood concentration C_b(τ) at the end of the absorption process τ, was compared to C_max; the utility of [Formula: see text] and [Formula: see text] in bioequivalence assessment was also explored. Equations for the calculation of F from oral data were derived for the (PBFTPK)₁ and (PBFTPK)₀ models. An estimate for F was also derived from an areas proportionality using oral data exclusively.

RESULTS

The simulated data of the (PBFTPK)₀ models exhibit rich dynamics encountered in complex drug absorption phenomena. Both (PBFTPK)₁ and (PBFTPK)₀ models result either in C_max = C_b(τ) or C_max > C_b(τ) for rapidly- and not rapidly-absorbed drugs, respectively; in the latter case, C_b(τ) and τ are meaningful parameters for drug's rate of exposure. For both (PBFTPK)₁ and (PBFTPK)₀ models, [Formula: see text] or portions of it cannot be used as early exposure rate indicators. [Formula: see text] is a useful parameter for the assessment of extent of absorption for very rapidly absorbed drugs. An estimate for F for theophylline formulations was found close to unity.

CONCLUSION

The (PBFTPK)₁ and (PBFTPK)₀ models are more akin to in vivo conditions. Estimates for F can be derived from oral data exclusively.

Patient-Reported Outcomes in the Phase III BRIGHTE Trial of the HIV-1 Attachment Inhibitor Prodrug Fostemsavir in Heavily Treatment-Experienced Individuals

Introduction

Heavily treatment-experienced (HTE) people living with HIV-1 (PLWH) have limited viable antiretroviral regimens available because of multidrug resistance and safety concerns. The first-in-class HIV-1 attachment inhibitor fostemsavir demonstrated efficacy and safety in HTE participants in the ongoing phase III BRIGHTE trial.

Objectives

We describe patient-reported outcomes (PROs) through week 48.

Methods

Eligible participants for whom their current regimen was failing were assigned to the randomized cohort (RC; one to two fully active agents remaining) or the nonrandomized cohort (NRC; no fully active agents remaining). PRO assessments included the EQ-5D-3L, EQ-VAS, and Functional Assessment of HIV Infection (FAHI) instruments.

Results

Both cohorts achieved increases in EQ-5D-3L US- and UK-referenced utility score from baseline at week 24. Mean visual analog scale (VAS) scores in the RC and NRC increased from baseline by 8.7 (95% CI 6.2–11.2) and 5.6 points (95% CI 1.5–9.7) at week 24 and increased from baseline by 9.8 (95% CI 7.0–12.6) and 4.9 points (95% CI 0.6–9.2) at week 48, respectively. Mean increases in FAHI total score from baseline to weeks 24 and 48 in the RC were 6.9 (95% CI 4.2–9.7) and 5.8 (95% CI 2.7–9.0), respectively, whereas mean increases in physical and emotional well-being subscale scores were 2.7 (95% CI 1.9–3.6) and 2.4 (95% CI 1.3–3.4) and 3.2 (95% CI 2.2–4.2) and 2.6 (95% CI 1.6–3.7), respectively, with little to no change in other subscales.

Conclusions

Improvements in major domains of the EQ-VAS and FAHI through week 48, combined with efficacy and safety results, support the use of fostemsavir for HTE PLWH.

Trial Registration Number and Date

NCT02362503; February 13, 2015.

Current challenges and future perspectives in oral absorption research: An opinion of the UNGAP network

Although oral drug delivery is the preferred administration route and has been used for centuries, modern drug discovery and development pipelines challenge conventional formulation approaches and highlight the insufficient mechanistic understanding of processes critical to oral drug absorption. This review presents the opinion of UNGAP scientists on four key themes across the oral absorption landscape: (1) specific patient populations, (2) regional differences in the gastrointestinal tract, (3) advanced formulations and (4) food-drug interactions. The differences of oral absorption in pediatric and geriatric populations, the specific issues in colonic absorption, the formulation approaches for poorly water-soluble (small molecules) and poorly permeable (peptides, RNA etc.) drugs, as well as the vast realm of food effects, are some of the topics discussed in detail. The identified controversies and gaps in the current understanding of gastrointestinal absorption-related processes are used to create a roadmap for the future of oral drug absorption research.

Physiologically Based Biopharmaceutics Modeling of Regional and Colon Absorption in Dogs

Colon absorption is a key determinant for the successful development of modified-release (MR) formulations, and the risk that colon absorption may limit the in vivo performance of an MR product can be assessed early by various in vitro tests or by preclinical in vivo regional absorption studies in dogs. Mechanistic physiologically based biopharmaceutics modeling (PBBM) is becoming increasingly accepted to predict in vivo performance and guide formulation development; however, no evaluation of the ability to predict colon absorption has been performed. The purpose of this study was to investigate if regional and colon absorption of drugs in dogs could be predicted with sufficient accuracy using PBBM to enable the replacement of in vivo dog studies in the early assessment of colon absorption limitation risks. This was done by predicting the regional and colon absorption and plasma exposure of 14 drugs after administration to the dog colon according to an a priori approach using the in silico absorption models GI-Sim and GastroPlus. Predictive performance was primarily assessed by comparing observed and predicted plasma concentration-time profiles, AUC_0-t, and the relative bioavailability in the colon (F_rel,colon) as compared to an oral/duodenal reference. Trends in dependency of prediction performance on predicted fraction absorbed, permeability, and solubility/dissolution rate were also investigated. For GI-Sim, the absolute average fold error (AAFE) values for AUC_0-t and F_rel,colon were within a 2-fold prediction error for both solutions (1.88 and 1.51, respectively) and suspensions (1.58 and 1.99, respectively). For GastroPlus, the AAFE values for AUC_0-t and F_rel,colon were outside the set 2-fold prediction error limit for accurate predictions for both solutions (3.63 and 2.98, respectively) and suspensions (2.94 and 2.09, respectively). No trends for over- or underprediction were observed for GI-Sim, whereas GastroPlus showed a slight trend for underprediction of both AUC_0-t and F_rel,colon for compounds with low permeability. In addition, regional differences in the plasma profiles were qualitatively predicted in the majority of cases for both software. Despite the differences in prediction performance, both models can be considered to predict regional differences in absorption as well as AUC_0-t and F_rel,colon with acceptable accuracy in an early development setting. The results of this study indicate that it is acceptable to replace in vivo regional absorption studies in dogs with the evaluated models as a method for the early assessment of the risk for colon absorption limitation of MR drug product candidates.

Effect of Renal and Hepatic Impairment on the Pharmacokinetics of Temsavir, the Active Moiety of Fostemsavir

The oral prodrug fostemsavir (GSK3684394, formerly BMS-663068) is an antiretroviral treatment for HIV-1. Fostemsavir is metabolized to its active moiety, temsavir, a first-in-class HIV-1 attachment inhibitor that binds to the viral envelope glycoprotein 120. Long-term antiretroviral therapy, the resulting longer life expectancy, and/or certain coinfections can increase the risk of chronic liver and kidney disease in HIV-1-infected individuals. Two studies were conducted to collectively evaluate the impact of renal and hepatic impairment on temsavir pharmacokinetics (PK) and safety following a single dose of a 600-mg extended-release fostemsavir tablet. There was no clinically meaningful effect of renal or hepatic impairment on temsavir PK, although renal clearance decreased with increasing renal impairment from moderate to severe, and exposure (maximum concentration and area under the plasma concentration-time curve from time 0 to infinity) tended to increase with increasing severity of hepatic impairment. No clinically meaningful effect of hemodialysis on temsavir PK parameters was observed. Fostemsavir was generally safe and well tolerated by treated subjects. Most adverse events (AEs) were mild, with the exception of 1 patient in the renal impairment study who discontinued due to 2 serious AEs unrelated to the study drug. No other treatment-emergent serious AEs occurred, and no other AEs leading to discontinuation were reported. Overall, these results suggest that fostemsavir can be used without dose modification in subjects with mild to severe renal impairment, including those with end-stage renal disease on hemodialysis, and in subjects with mild to severe hepatic impairment.

Fostemsavir for the treatment of HIV

Introduction: For those with heavily treatment experienced (HTE) HIV-1 and virologic failure, therapeutic options are limited. A variety of barriers such as drug resistance, side effects, past intolerance, and administration inability contribute to the need for novel drug classes in this population.Areas Covered: Herein, we review the pharmacology, clinical efficacy, and safety profile of fostemsavir, a first in its class attachment inhibitor recently FDA approved for use.Expert Opinion: Fostemsavir is a well-tolerated oral medication with relatively few drug-drug interactions. Clinical trial data demonstrates virologic and notable immunologic response in conjunction with optimal background therapy in HTE persons living with HIV. Fostemsavir exhibits no cross-resistance with other ARV classes and thus is an important advancement for patients harboring drug-resistant HIV. Further study will be needed to determine outstanding clinical questions such as the role of drug resistance testing and fostemsavir use outside of the HTE population.

Effects of Temsavir, Active Moiety of Antiretroviral Agent Fostemsavir, on QT Interval: Results From a Phase I Study and an Exposure-Response Analysis

Fostemsavir, a prodrug of human immunodeficiency virus attachment inhibitor temsavir (TMR), is in phase III development in combination with other antiretroviral agents for the treatment of human immunodeficiency virus type I (HIV-1) infection in heavily treatment-experienced adults with multidrug-resistant HIV-1 infection for whom it is otherwise not possible to construct a suppressive antiviral regimen due to resistance, intolerance, or safety considerations. The proarrhythmic potential of fostemsavir was studied in a thorough QT study and exposure-response modeling was performed at therapeutic and supratherapeutic concentrations of TMR. Fostemsavir 1,200 mg b.i.d. did not result in a clinically meaningful change from placebo in baseline-adjusted Fridericia-corrected QTc (ddQTcF); however, at a supratherapeutic dose of 2,400 mg b.i.d., the upper bound of the two-sided 90% confidence interval (CI) of ddQTcF was 13.2 msec, exceeding the clinically important 10 msec threshold. A linear model of ddQTcF as a function of TMR plasma concentrations described these observations. Based on simulations with this model, TMR concentrations up to 7,500 ng/mL are expected to have an upper 90% CI bound for QTcF ≤ 10 msec. This concentration is 4.2-fold higher than the geometric mean TMR peak plasma concentration (Cmax ) of 1,770 ng/mL in heavily treatment-experienced HIV-1 infected patients administered fostemsavir 600 mg b.i.d. in the phase III BRIGHTE study (NCT02362503).

Fostemsavir in Adults with Multidrug-Resistant HIV-1 Infection

BACKGROUND

Among some patients with human immunodeficiency virus type 1 (HIV-1) infection who have undergone multiple antiretroviral therapies and have limited options for treatment, new classes of antiretroviral drugs with novel mechanisms of action are needed. Fostemsavir is the prodrug of temsavir, a first-in-class investigational HIV-1 attachment inhibitor.

METHODS

In this ongoing phase 3 trial in 23 countries, we enrolled patients with multidrug-resistant HIV-1 infection in two cohorts, according to their remaining treatment options. In the first cohort, we assigned (in a 3:1 ratio) patients who had the option of using at least one fully active, approved antiretroviral drug in at least one but no more than two antiretroviral classes to add either fostemsavir (at a dose of 600 mg twice daily) or placebo to their failing regimen for 8 days, followed by open-label fostemsavir plus optimized background therapy (randomized cohort). In the second cohort, patients who had no remaining antiretroviral options were started on open-label fostemsavir plus optimized background therapy on day 1 (nonrandomized cohort). The primary end point was the mean change in the HIV-1 RNA level from day 1 through day 8 in the randomized cohort.

RESULTS

A total of 371 patients were treated, including 272 in the randomized cohort and 99 in the nonrandomized cohort. At day 8, the mean decrease in the HIV-1 RNA level was 0.79 log₁₀ copies per milliliter in the fostemsavir group and 0.17 log₁₀ copies in the placebo group (P<0.001). At week 48, a virologic response (HIV-1 RNA level, <40 copies per milliliter) had occurred in 54% of the patients in the randomized cohort and in 38% of those in the nonrandomized cohort; the mean increase in the CD4+ T-cell count was 139 cells per cubic millimeter and 64 cells per cubic millimeter, respectively. Adverse events led to the discontinuation of fostemsavir in 7% of the patients. In the randomized cohort, glycoprotein 120 (gp120) substitutions were found in 20 of 47 patients (43%) with virologic failure.

CONCLUSIONS

In patients with multidrug-resistant HIV-1 infection with limited therapy options, those who received fostemsavir had a significantly greater decrease in the HIV-1 RNA level than those who received placebo during the first 8 days. Efficacy was sustained through 48 weeks. (Funded by Bristol-Myers Squibb and GSK/ViiV Healthcare; BRIGHTE ClinicalTrials.gov number, NCT02362503.).

Methadone and buprenorphine pharmacokinetics and pharmacodynamics when coadministered with fostemsavir to opioid-dependent, human immunodeficiency virus seronegative participants

AIMS

Regional human immunodeficiency virus (HIV) prevalence rates are high in people with history of injection drug use, including those managed with maintenance opioids. Fostemsavir (FTR) is an oral prodrug of temsavir, a first-in-class attachment inhibitor that binds HIV-1 gp120, preventing initial HIV attachment and entry into host immune cells. Here we determine the impact of FTR on the pharmacokinetics of opioids methadone (MET: R-, S- and total) or buprenorphine and norbuprenorphine (BUP and norBUP) when coadministered.

METHODS

Study 206216 (NCT02666001) was a Phase I, open-label study, assessing the effect of FTR 600 mg (extended-release formulation) twice daily on pharmacokinetics of MET or BUP and norBUP, in non-HIV-infected participants on stable maintenance therapy with MET (40-120 mg; n = 16) or BUP plus naloxone (8-24 mg plus 2-6 mg; n = 16); pharmacodynamic response was assessed using standard opioid rating scales.

RESULTS

Following coadministration with FTR, dose-normalized MET (R-, S- and total) exposures (maximum concentration in plasma, area under the plasma concentration-time curve over the dosing interval and concentration in plasma at 24 hours) increased 9-15% and BUP and norBUP exposures increased 24-39%. The 90% confidence interval ranges for MET (1.01-1.21) and BUP and norBUP (1.03-1.69) were within respective no-effect ranges (0.7-1.43 and 0.5-2.0). Opioid pharmacodynamic scores were similar with and without MET/BUP with no symptoms of withdrawal/overdose; no new safety signal for FTR when combined with a stable opioid regimen.

CONCLUSIONS

FTR did not impact MET and had no clinically significant impact on BUP pharmacokinetics. Standardized assessments of opioid pharmacodynamics were unchanged throughout FTR administration with MET or BUP. FTR can be administered with MET or BUP without dose adjustment.

Discovery of the Human Immunodeficiency Virus Type 1 (HIV-1) Attachment Inhibitor Temsavir and Its Phosphonooxymethyl Prodrug Fostemsavir

The optimization of the 4-methoxy-6-azaindole series of HIV-1 attachment inhibitors (AIs) that originated with 1 to deliver temsavir (3, BMS-626529) is described. The most beneficial increases in potency and pharmacokinetic (PK) properties were attained by incorporating N-linked, sp²-hybridized heteroaryl rings at the 7-position of the heterocyclic nucleus. Compounds that adhered to a coplanarity model afforded targeted antiviral potency, leading to the identification of 3 with characteristics that provided for targeted exposure and PK properties in three preclinical species. However, the physical properties of 3 limited plasma exposure at higher doses, both in preclinical studies and in clinical trials as the result of dissolution- and/or solubility-limited absorption, a deficiency addressed by the preparation of the phosphonooxymethyl prodrug 4 (BMS-663068, fostemsavir). An extended-release formulation of 4 is currently in phase III clinical trials where it has shown promise as part of a drug combination therapy in highly treatment-experienced HIV-1 infected patients.

Inhibitors of HIV-1 Attachment: The Discovery and Development of Temsavir and its Prodrug Fostemsavir

Human immunodeficiency virus-1 (HIV-1) infection currently requires lifelong therapy with drugs that are used in combination to control viremia. The indole-3-glyoxamide 6 was discovered as an inhibitor of HIV-1 infectivity using a phenotypic screen and derivatives of this compound were found to interfere with the HIV-1 entry process by stabilizing a conformation of the virus gp120 protein not recognized by the host cell CD4 receptor. An extensive optimization program led to the identification of temsavir (31), which exhibited an improved antiviral and pharmacokinetic profile compared to 6 and was explored in phase 3 clinical trials as the phosphonooxymethyl derivative fostemsavir (35), a prodrug designed to address dissolution- and solubility-limited absorption issues. In this drug annotation, we summarize the structure-activity and structure-liability studies leading to the discovery of 31 and the clinical studies conducted with 35 that entailed the development of an extended release formulation suitable for phase 3 clinical trials.

Crystal structures of trimeric HIV envelope with entry inhibitors BMS-378806 and BMS-626529

The HIV-1 envelope (Env) spike is a conformational machine that transitions between prefusion (closed, CD4- and CCR5-bound) and postfusion states to facilitate HIV-1 entry into cells. Although the prefusion closed conformation is a potential target for inhibition, development of small-molecule leads has been stymied by difficulties in obtaining structural information. Here, we report crystal structures at 3.8-Å resolution of an HIV-1-Env trimer with BMS-378806 and a derivative BMS-626529 for which a prodrug version is currently in Phase III clinical trials. Both lead candidates recognized an induced binding pocket that was mostly excluded from solvent and comprised of Env elements from a conserved helix and the β20-21 hairpin. In both structures, the β20-21 region assumed a conformation distinct from prefusion-closed and CD4-bound states. Together with biophysical and antigenicity characterizations, the structures illuminate the allosteric and competitive mechanisms by which these small-molecule leads inhibit CD4-induced structural changes in Env.

Absorption sites of orally administered drugs in the small intestine

INTRODUCTION

In pharmacotherapy, drugs are mostly taken orally to be absorbed systemically from the small intestine, and some drugs are known to have preferential absorption sites in the small intestine. It would therefore be valuable to know the absorption sites of orally administered drugs and the influencing factors. Areas covered:In this review, the author summarizes the reported absorption sites of orally administered drugs, as well as, influencing factors and experimental techniques. Information on the main absorption sites and influencing factors can help to develop ideal drug delivery systems and more effective pharmacotherapies. Expert opinion: Various factors including: the solubility, lipophilicity, luminal concentration, pKa value, transporter substrate specificity, transporter expression, luminal fluid pH, gastrointestinal transit time, and intestinal metabolism determine the site-dependent intestinal absorption. However, most of the dissolved fraction of orally administered drugs including substrates for ABC and SLC transporters, except for some weakly basic drugs with higher pKa values, are considered to be absorbed sequentially from the proximal small intestine. Securing the solubility and stability of drugs prior to reaching to the main absorption sites and appropriate delivery rates of drugs at absorption sites are important goals for achieving effective pharmacotherapy.

Advances in mechanistic understanding of release rate control mechanisms of extended-release hydrophilic matrix tablets

Approaches to characterizing and developing understanding around the mechanisms that control the release of drugs from hydrophilic matrix tablets are reviewed. While historical context is provided and direct physical characterization methods are described, recent advances including the role of percolation thresholds, the application on magnetic resonance and other spectroscopic imaging techniques are considered. The influence of polymer and dosage form characteristics are reviewed. The utility of mathematical modeling is described. Finally, how all the information derived from applying the developed mechanistic understanding from all of these tools can be brought together to develop a robust and reliable hydrophilic matrix extended-release tablet formulation is proposed.

Model-Based Phase 3 Dose Selection for HIV-1 Attachment Inhibitor Prodrug BMS-663068 in HIV-1-Infected Patients: Population Pharmacokinetics/Pharmacodynamics of the Active Moiety, BMS-626529

BMS-663068 is an oral prodrug of the HIV-1 attachment inhibitor BMS-626529, which prevents viral attachment to host CD4(+) T cells by binding to HIV-1 gp120. To guide dose selection for the phase 3 program, pharmacokinetic/pharmacodynamic modeling was performed using data from two phase 2 studies with HIV-1-infected subjects (n = 244). BMS-626529 population pharmacokinetics were described by a two-compartment model with first-order elimination from the central compartment, zero-order release of prodrug from the extended-release formulation into a hypothetical absorption compartment, and first-order absorption into the central compartment. The covariates of BMS-663068 formulation type, lean body mass, baseline CD8(+) T-cell percentage, and ritonavir coadministration were found to be significant contributors to intersubject variability. Exposure-response analyses showed a relationship between the loge-transformed concentration at the end of a dosing interval (Ctau) normalized for the protein binding-adjusted BMS-626529 half-maximal (50%) inhibitory concentration (PBAIC50) and the change in the HIV-1 RNA level from the baseline level after 7 days of BMS-663068 monotherapy. The probability of achieving a decline in HIV-1 RNA level of >0.5 or >1.0 log10 copies/ml as a function of the loge-transformed PBAIC50-adjusted Ctau after 7 days of monotherapy was 99 to 100% and 57 to 73%, respectively, for proposed BMS-663068 doses of 400 mg twice daily (BID), 600 mg BID (not studied in the phase 2b study), 800 mg BID, 600 mg once daily (QD), and 1,200 mg QD. On the basis of a slight advantage in efficacy of BID dosing over QD dosing, similar responses for the 600- and 800-mg BID doses, and prior clinical observations, BMS-663068 at 600 mg BID was predicted to have the optimal benefit-risk profile and selected for further clinical investigation. (The phase 2a proof-of-concept study AI438006 and the phase 2b study AI438011 are registered at ClinicalTrials.gov under numbers NCT01009814 and NCT01384734, respectively.).

Comparison of Deconvolution-Based and Absorption Modeling IVIVC for Extended Release Formulations of a BCS III Drug Development Candidate

In vitro-in vivo correlations (IVIVC) are predictive mathematical models describing the relationship between dissolution and plasma concentration for a given drug compound. The traditional deconvolution/convolution-based approach is the most common methodology to establish a level A IVIVC that provides point to point relationship between the in vitro dissolution and the in vivo input rate. The increasing application of absorption physiologically based pharmacokinetic model (PBPK) has provided an alternative IVIVC approach. The current work established and compared two IVIVC models, via the traditional deconvolution/convolution method and via absorption PBPK modeling, for two types of modified release (MR) formulations (matrix and multi-particulate tablets) of MK-0941, a BCS III drug development candidate. Three batches with distinct release rates were studied for each formulation technology. A two-stage linear regression model was used for the deconvolution/convolution approach while optimization of the absorption scaling factors (a model parameter that relates permeability and input rate) in Gastroplus(TM) Advanced Compartmental Absorption and Transit model was used for the absorption PBPK approach. For both types of IVIVC models established, and for either the matrix or the multiparticulate formulations, the average absolute prediction errors for AUC and C max were below 10% and 15%, respectively. Both the traditional deconvolution/convolution-based and the absorption/PBPK-based level A IVIVC model adequately described the compound pharmacokinetics to guide future formulation development. This case study highlights the potential utility of absorption PBPK model to complement the traditional IVIVC approaches for MR products.

Double Variational Binding--(SMILES) Conformational Analysis by Docking Mechanisms for Anti-HIV Pyrimidine Ligands

Variational quantitative binding–conformational analysis for a series of anti-HIV pyrimidine-based ligands is advanced at the individual molecular level. This was achieved by employing ligand-receptor docking algorithms for each molecule in the 1,3-disubstituted uracil derivative series that was studied. Such computational algorithms were employed for analyzing both genuine molecular cases and their simplified molecular input line entry system (SMILES) transformations, which were created via the controlled breaking of chemical bonds, so as to generate the longest SMILES molecular chain (LoSMoC) and Branching SMILES (BraS) conformations. The study identified the most active anti-HIV molecules, and analyzed their special and relevant bonding fragments (chemical alerts), and the recorded energetic and geometric docking results (i.e., binding and affinity energies, and the surface area and volume of bonding, respectively). Clear computational evidence was also produced concerning the ligand-receptor pocket binding efficacies of the LoSMoc and BraS conformation types, thus confirming their earlier presence (as suggested by variational quantitative structure-activity relationship, variational-QSAR) as active intermediates for the molecule-to-cell transduction process.

Pharmacokinetic interactions between BMS-626529, the active moiety of the HIV-1 attachment inhibitor prodrug BMS-663068, and ritonavir or ritonavir-boosted atazanavir in healthy subjects

BMS-663068 is a prodrug of BMS-626529, a first-in-class attachment inhibitor that binds directly to HIV-1 gp120, preventing initial viral attachment and entry into host CD4(+) T cells. This open-label, multiple-dose, four-sequence, crossover study addressed potential two-way drug-drug interactions following coadministration of BMS-663068 (BMS-626529 is a CYP3A4 substrate), atazanavir (ATV), and ritonavir (RTV) (ATV and RTV are CYP3A4 inhibitors). Thirty-six healthy subjects were randomized 1:1:1:1 to receive one of four treatment sequences with three consecutive treatments: BMS-663068 at 600 mg twice daily (BID), BMS-663068 at 600 mg BID plus RTV at 100 mg once daily (QD), ATV at 300 mg QD plus RTV at 100 mg QD (RTV-boosted ATV [ATV/r]), or BMS-663068 at 600 mg BID plus ATV at 300 mg QD plus RTV at 100 mg QD. Compared with the results obtained by administration of BMS-663068 alone, coadministration of BMS-663068 with ATV/r increased the BMS-626529 maximum concentration in plasma (Cmax) and the area under the concentration-time curve in one dosing interval (AUCtau) by 68% and 54%, respectively. Similarly, coadministration of BMS-663068 with RTV increased the BMS-626529 Cmax and AUCtau by 53% and 45%, respectively. Compared with the results obtained by administration of ATV/r alone, ATV and RTV systemic exposures remained similar following coadministration of BMS-663068 with ATV/r. BMS-663068 was generally well tolerated, and there were no adverse events (AEs) leading to discontinuation, serious AEs, or deaths. Moderate increases in BMS-626529 systemic exposure were observed following coadministration of BMS-663068 with ATV/r or RTV. However, the addition of ATV to BMS-663068 plus RTV did not further increase BMS-626529 systemic exposure. ATV and RTV exposures remained similar following coadministration of BMS-663068 with either ATV/r or RTV. BMS-663068 was generally well tolerated alone or in combination with either RTV or ATV/r.

Homology models of the HIV-1 attachment inhibitor BMS-626529 bound to gp120 suggest a unique mechanism of action

HIV-1 gp120 undergoes multiple conformational changes both before and after binding to the host CD4 receptor. BMS-626529 is an attachment inhibitor (AI) in clinical development (administered as prodrug BMS-663068) that binds to HIV-1 gp120. To investigate the mechanism of action of this new class of antiretroviral compounds, we constructed homology models of unliganded HIV-1 gp120 (UNLIG), a pre-CD4 binding-intermediate conformation (pCD4), a CD4 bound-intermediate conformation (bCD4), and a CD4/co-receptor-bound gp120 (LIG) from a series of partial structures. We also describe a simple pathway illustrating the transition between these four states. Guided by the positions of BMS-626529 resistance substitutions and structure-activity relationship data for the AI series, putative binding sites for BMS-626529 were identified, supported by biochemical and biophysical data. BMS-626529 was docked into the UNLIG model and molecular dynamics simulations were used to demonstrate the thermodynamic stability of the different gp120 UNLIG/BMS-626529 models. We propose that BMS-626529 binds to the UNLIG conformation of gp120 within the structurally conserved outer domain, under the antiparallel β20-β21 sheet, and adjacent to the CD4 binding loop. Through this binding mode, BMS-626529 can inhibit both CD4-induced and CD4-independent formation of the "open state" four-stranded gp120 bridging sheet, and the subsequent formation and exposure of the chemokine co-receptor binding site. This unique mechanism of action prevents the initial interaction of HIV-1 with the host CD4+ T cell, and subsequent HIV-1 binding and entry. Our findings clarify the novel mechanism of BMS-626529, supporting its ongoing clinical development.