Measurements of volatile organic compounds in the earth's atmosphere using proton-transfer-reaction mass spectrometry

Recent advances in mass spectrometry techniques for atmospheric chemistry research on molecular-level

The Earth's atmosphere is composed of an enormous variety of chemical species associated with trace gases and aerosol particles whose composition and chemistry have critical impacts on the Earth's climate, air quality, and human health. Mass spectrometry analysis as a powerful and popular analytical technique has been widely developed and applied in atmospheric chemistry for decades. Mass spectrometry allows for effective detection, identification, and quantification of a broad range of organic and inorganic chemical species with high sensitivity and resolution. In this review, we summarize recently developed mass spectrometry techniques, methods, and applications in atmospheric chemistry research in the past several years on molecular-level. Specifically, new developments of ion-molecule reactors, various soft ionization methods, and unique coupling with separation techniques are highlighted. The new mass spectrometry applications in laboratory studies and field measurements focused on improving the detection limits for traditional and emerging volatile organic compounds, characterizing multiphase highly oxygenated molecules, and monitoring particle bulk and surface compositions.

Near real-time quantification of microbial volatile organic compounds from mycoparasitic fungi: Potential for advanced monitoring and pest control

Microbial volatile organic compounds (MVOCs) are thought to play a key role in the interactions between mycoparasitic fungi, such as the biocontrol agent Trichoderma atroviride (T. atroviride), and their environment. However, the analysis of MVOC emissions from fungal samples is challenging because of low analyte concentrations, typically in the ppbV-range, and the complex chemical nature of biological samples. In a recent study using proton transfer reaction-time of flight-mass spectrometry (PTR-ToF-MS) to determine MVOC emissions from T. atroviride, many product ions were unspecific, as they could arise from a large number of possible analytes. The aim of the present study was to determine whether fast gas chromatography (fast-GC) coupled to PTR-ToF-MS could be used to overcome this issue and constitute a suitable on-line, near real-time method to identify and quantify fungal MVOC emissions in the ppbV-to-ppmV regime. Using gas standards of eleven MVOCs known to be emitted by T. atroviride such as 6-amyl-α-pyrone (6-PP), 2-pentylfuran, 1-octen-3-ol, 2-heptanone, 3-octanone, 2-methyl-1-propanol, 2-pentanone, 3-methyl-1-butanol, 3-methylbutanal, acetone and ethanol, we developed a fast-GC method with a total runtime of 180 s which significantly enhances the analytical specificity of PTR-ToF-MS compared to conventional PTR-ToF-MS without fast-GC separation. Limits of detection were on the order of 0.1-4 ppbV. The increased analytical specificity demonstrated notable benefits, especially for MVOCs having partially overlapping distributions of product ions when analyzed directly using PTR-ToF-MS. In order to demonstrate the applicability of the analytical method, we analysed T. atroviride samples in four biological replicates twice daily over a duration of five days. Using the fast-GC method, nine out of the eleven MVOC species considered in this study in the headspace of T. atroviride could be identified and quantified and their time evolution over the five-day incubation period determined. The measured volume mixing ratios (VMRs) ranged from single-digit ppbV (2-pentylfuran) up to few ppmV (6-PP and ethanol), with the other compounds in the 10-to-100-ppbV range (1-octen-3-ol, 2-heptanone, 2-methyl-1-propanol, 3-methyl-1-butanol, 3-methylbutanal and acetone). Our results suggest that fast-GC-PTR-ToF-MS is a method well-suited for the analysis of gas-phase samples of biological origin, including but not limited to (mycoparasitic) fungi, in a wide range of VMRs from sub-ppbV to few-ppmV.

The UCI Fluxtron: a versatile dynamic chamber and software system for biosphere-atmosphere exchange research

Here we present the UCI Fluxtron, a cost-effective multi-enclosure dynamic gas exchange system that provides an adequate level of control of the experimental conditions for investigating biosphere-atmosphere exchange of trace gases. We focus on the hardware and software used to monitor, control, and record the air flows, temperatures, and valve switching, and on the software that processes the collected data to calculate the exchange flux of trace gases. We provide the detailed list of commercial materials used and also the software code developed for the Fluxtron, so that similar dynamic enclosure systems can be quickly adopted by interested researchers. Furthermore, the two software components -Fluxtron Control and Fluxtron Process- work independently of each other, thus being highly adaptable for other experimental designs. Beyond plants, the same experimental setup can be applied to the study of trace gas exchange by animals, microbes, soil, or any materials that can be enclosed in a suitable container.

Low-Cost Alternative for Online Analysis of Volatile Organic Compounds

The use of online mass spectrometry for detecting volatile organic compounds (VOCs) has proven to be a powerful technique, allowing for real-time analysis of many chemical and biochemical processes. Unfortunately, online mass spectrometry has had limited application due to high instrument costs and limited availability. Here, we detail the design, construction, and performance characteristics of a custom ion-molecule reactor retrofitted to a commonly used single quadrupole mass spectrometer to operate as an online chemical ionization mass spectrometer (CIMS). This low-cost modified CIMS is capable of limits of detection below 10 parts per trillion for select VOCs including dimethyl sulfide, dimethylamine, and trimethylamine.

Chemical Analysis of Exhaled Vape Emissions: Unraveling the Complexities of Humectant Fragmentation in a Human Trial Study

Electronic cigarette smoking (or vaping) is on the rise, presenting questions about the effects of secondhand exposure. The chemical composition of vape emissions was examined in the exhaled breath of eight human volunteers with the high chemical specificity of complementary online and offline techniques. Our study is the first to take multiple exhaled puff measurements from human participants and compare volatile organic compound (VOC) concentrations between two commonly used methods, proton-transfer-reaction time-of-flight mass spectrometry (PTR-ToF-MS) and gas chromatography (GC). Five flavor profile groups were selected for this study, but flavor compounds were not observed as the main contributors to the PTR-ToF-MS signal. Instead, the PTR-ToF-MS mass spectra were overwhelmed by e-liquid thermal decomposition and fragmentation products, which masked other observations regarding flavorings and other potentially toxic species associated with secondhand vape exposure. Compared to the PTR-ToF-MS, GC measurements reported significantly different VOC concentrations, usually below those from PTR-ToF-MS. Consequently, PTR-ToF-MS mass spectra should be interpreted with caution when reporting quantitative results in vaping studies, such as doses of inhaled VOCs. Nevertheless, the online PTR-ToF-MS analysis can provide valuable qualitative information by comparing relative VOCs in back-to-back trials. For example, by comparing the mass spectra of exhaled air with those of direct puffs, we can conclude that harmful VOCs present in the vape emissions are largely absorbed by the participants, including large fractions of nicotine.

Investigating the industrial origin of terpenoids in a coastal city in northern France: A source apportionment combining anthropogenic, biogenic, and oxygenated VOC

Terpenoids have long been known to originate from natural sources. However, there is growing evidence for emissions from anthropogenic activities in cities, in particular from the production, manufacturing, and use of household solvents. Here, as part of the DATAbASE (Do Anthropogenic Terpenoids mAtter in AtmoSpheric chEmistry?) project, we investigate for the first time the potential role of industrial activities on the terpenoid burden in the urban atmosphere. This study is based on continuous VOC observations from an intensive field campaign conducted in July 2014 at an industrial-urban background site located in Dunkirk, Northern France. More than 80 VOCs including oxygenated and terpenoid compounds were measured by on-line Thermal Desorption Gas Chromatography with a Flame Ionization Detection (TD-GC-FID) and Proton Transfer Reaction-Time of Flight Mass Spectrometry (PTR-ToFMS). Isoprene, α-pinene, limonene and the sum of monoterpenes were the terpenoids detected at average mixing ratios of 0.02 ± 0.02 ppbv, 0.02 ± 0.02 ppbv, 0.01 ± 0.01 ppbv and 0.03 ± 0.05 ppbv, respectively. Like other anthropogenic VOCs, the mixing ratios of terpenoids significantly increase downwind the industrial plumes by one order of magnitude. Positive Matrix Factorization (PMF) was performed to identify the different emission sources of VOCs and their contribution. Six factors out of the eight factors extracted (r2 = 0.95) are related to industrial emissions such as solvent use, chemical and agrochemical storage, metallurgy, petrochemical, and coal-fired industrial activities. From the correlations between the industrial-type PMF factors, sulfur dioxide, and terpenoids, we determined their emissions ratios and we quantified for the first time their industrial emissions. The highest emission ratio is related to the alkene-dominated factor and is related to petrochemical, metallurgical and coal-fired industrial activities. The industrial emissions of monoterpenes equal 8.1 ± 4.3 tons/year. Those emissions are as significant as the non-industrialized anthropogenic ones estimated for the Paris megacity.

Light oxygenated volatile organic compound concentrations in an Eastern Mediterranean urban atmosphere rivalling those in megacities

Highly resolved measurements of primary and secondary oxygenated volatile organic compounds (OVOCs) by proton-transfer-reaction mass spectrometry (PTR-MS) and the AMOVOC sampler (Airborne Measurements Of VOC) were performed in Beirut, Lebanon, during the ECOCEM (Emissions and Chemistry of Organic Carbon in the East Mediterranean) experiments. The OVOC concentrations (0.15-7.0 ppb) rival those reported for international megacities like Paris, Tokyo, or São Paulo (0.3-6.5 ppb). This study highlights the seasonal variability of OVOCs, the potential role of background pollution on OVOC concentrations, traffic emissions of OVOCs, and the secondary production of OVOCs during both summer and winter. The primary and secondary OVOC fractions were estimated using two methods based on the night-time emission ratio and photochemical age. Our calculations coupled with a correlation analysis revealed the following: firstly, background concentrations contributed significantly, especially for longer-lived OVOCs, such as methanol and acetone (30%-80%). Secondly, secondary production in summer increased up to 60%, except for methanol and isoprene oxidation products, i.e., for methacrolein and methyl vinyl ketone. Thirdly, the secondary production in the Eastern Mediterranean persisted in winter, and finally, strong primary traffic emissions dominated the primary biogenic emissions. Finally, the emission ratios were used to evaluate the global anthropogenic emission inventories downscaled to Lebanon. Although limited to two individual non-lumped species (formaldehyde and acetone), the emission ratios compared well, within a factor of 2. However, the emissions of aldehydes and ketones from the CAMS, Edgar, and MACCITY inventories showed discrepancies of up to three orders of magnitude. This demonstrates a need for improved OVOC representation in emission inventories, considering the atmospheric relevance and abundance of OVOCs and their use in volatile chemical products.

Simultaneous time-resolved inorganic haloamine measurements enable analysis of disinfectant degradation kinetics and by-product formation

We demonstrate the application of proton transfer time-of-flight mass spectrometry (PTR-TOF-MS) in monitoring the kinetics of disinfectant decay in water with a sensitivity one to three orders of magnitude greater than other analytical methods. Chemical disinfection inactivates pathogens during water treatment and prevents regrowth as water is conveyed in distribution system pipes, but it also causes formation of toxic disinfection by-products. Analytical limits have hindered kinetic models, which aid in ensuring water quality and protecting public health by predicting disinfection by-products formation. PTR-TOF-MS, designed for measuring gas phase concentrations of organic compounds, was able to simultaneously monitor aqueous concentrations of five inorganic haloamines relevant to chloramine disinfection under drinking water relevant concentrations. This novel application to aqueous analytes opens a new range of applications for PTR-TOF-MS.

Pollution characteristics, source appointment and environmental effect of oxygenated volatile organic compounds in Guangdong-Hong Kong-Macao Greater Bay Area: Implication for air quality management

Same as other bay areas, the Guangdong-Hong Kong-Macao Greater Bay Area (GBA) is also suffering atmospheric composite pollution. Even a series of atmospheric environment management policies have been conducted to win the "blue sky defense battle", the atmospheric secondary pollutants (e.g., O3) originated from oxygenated volatile organic compounds (OVOCs) still threaten the air quality in GBA. However, there lacks a systematic summary on the emission, formation, pollution and environmental effects of OVOCs in this region for further air quality management. This review focused on the researches related to OVOCs in GBA, including their pollution characteristics, detection methods, source distributions, secondary formations, and impacts on the atmosphere. Pollution profile of OVOCs in GBA revealed that the concentration percentage among total VOCs from Guangzhou and Dongguan cities exceeded 50 %, while methanol, formaldehyde, acetone, and acetaldehyde were the top four highest concentrated OVOCs. The detection technique on regional atmospheric OVOCs (e.g., oxygenated organic molecules (OOMs)) underwent an evolution of off-line derivatization method, on-line spectroscopic method and on-line mass spectrometry method. The OVOCs in GBA were mainly from primary emissions (up to 80 %), including vehicle emissions and biomass combustion. The anthropogenic alkenes and aromatics in urban area, and natural isoprene in rural area also made a significant contribution to the secondary emission (e.g., photochemical formation) of OVOCs. About 20 % in average of ROx radicals was produced from photolysis of formaldehyde in comparison with O3, nitrous acid and rest OVOCs, while the reaction between OVOCs and free radical accelerated the NOx-O3 cycle, contributing to 15 %-60 % cumulative formation of O3 in GBA. Besides, the heterogeneous reactions of dicarbonyls generated 21 %-53 % of SOA. This review also provided suggestions for future research on OVOCs in terms of regional observation, analytical method and mechanistic study to support the development of a control and management strategy on OVOCs in GBA and China.

Emissions of Volatile Organic Compounds from Human Occupants in a Student Office: Dependence on Ozone Concentration

Human occupants themselves constitute an important source of volatile organic compounds (VOCs) in indoor environments through breath and dermal emissions. In order to quantify VOC emissions from occupants under real-world settings, previous indoor observational studies often determined emission factors (i.e., average emission rates per person). However, the values obtained across these studies exhibited large variability, and the causes of this variability still need to be understood. Herein we report 10-day real-time VOC measurements in a university student office, using a proton transfer reaction-quadrupole interface-time-of-flight mass spectrometer. A method was developed to identify VOCs of primary human origin and to quantify the corresponding emission factors, accounting for the dynamically changing occupancy level and ventilation rate in the assessed office. We found that the emission factors of many dermally emitted VOCs strongly increased as the ozone concentration increased from <3 to 10-15 ppb. These VOCs include geranyl acetone, 6-methyl-5-hepten-2-one (6-MHO), and C10-C12 saturated aldehydes, which align with characteristic first-generation ozonolysis products of skin oil. The strongest increase occurred for 6-MHO, from 113 to 337 μg/h/p. In comparison, acetone and isoprene, which are primarily emitted from human breath, varied little with the ozone level. In light of this finding, we conducted an integrated analysis of emission factors reported in the literature for two frequently reported species, namely, 6-MHO and decanal. Ozone concentration alone can explain 94-97% of the variation in their emission factors across previous studies, and the best-estimated ozone dependence obtained using the literature data is consistent with those obtained in the current study. These results suggest that the ozone concentration is a key factor regulating emission factors of many dermally emitted VOCs in real indoor environments, which has to be considered when reporting or using the emission factors.

Synthesizing evidence for the external cycling of NOx in high- to low-NOx atmospheres

External cycling regenerating nitrogen oxides (NOx ≡ NO + NO2) from their oxidative reservoir, NOz, is proposed to reshape the temporal-spatial distribution of NOx and consequently hydroxyl radical (OH), the most important oxidant in the atmosphere. Here we verify the in situ external cycling of NOx in various environments with nitrous acid (HONO) as an intermediate based on synthesized field evidence collected onboard aircraft platform at daytime. External cycling helps to reconcile stubborn underestimation on observed ratios of HONO/NO2 and NO2/NOz by current chemical model schemes and rationalize atypical diurnal concentration profiles of HONO and NO2 lacking noontime valleys specially observed in low-NOx atmospheres. Perturbation on the budget of HONO and NOx by external cycling is also found to increase as NOx concentration decreases. Consequently, model underestimation of OH observations by up to 41% in low NOx atmospheres is attributed to the omission of external cycling in models.

Prediction of the Response of a Photoionization Detector to a Complex Gaseous Mixture of Volatile Organic Compounds Produced by α-Pinene Oxidation

Photoionization detectors (PIDs) are lightweight and respond in real time to the concentrations of volatile organic compounds (VOCs), making them suitable for environmental measurements on many platforms. However, the nonselective sensing mechanism of PIDs challenges data interpretation, particularly when exposed to the complex VOC mixtures prevalent in the Earth's atmosphere. Herein, two approaches to this challenge are investigated. In the first, quantum-chemistry calculations are used to estimate photoionization cross sections and ionization potentials of individual species. In the second, machine learning models are trained on these calculated values, as well as empirical PID response factors, and then used for prediction. For both approaches, the resulting information for individual species is used to model the overall PID response to a complex VOC mixture. In complement, laboratory experiments in the Harvard Environmental Chamber are carried out to measure the PID response to the complex molecular mixture produced by α-pinene oxidation under various conditions. The observations show that the measured PID response is 15% to 30% smaller than the PID response modeled by quantum-chemistry calculations of the photoionization cross section for the photo-oxidation experiments and 15% to 20% for the ozonolysis experiments. By comparison, the measured PID response is captured within a 95% confidence interval by the use of machine learning to model the PID response based on the empirical response factor in all experiments. Taken together, the results of this study demonstrate the application of machine learning to augment the performance of a nonselective chemical sensor. The approach can be generalized to other reactive species, oxidants, and reaction mechanisms, thus enhancing the utility and interpretability of PID measurements for studying atmospheric VOCs.

Direct mass spectrometry analysis of exhaled human breath in real-time

The molecular composition of exhaled human breath can reflect various physiological and pathological conditions. Considerable progress has been achieved over the past decade in real-time analysis of exhaled human breath using direct mass spectrometry methods, including selected ion flow tube mass spectrometry, proton transfer reaction mass spectrometry, extractive electrospray ionization mass spectrometry, secondary electrospray ionization mass spectrometry, acetone-assisted negative photoionization mass spectrometry, atmospheric pressure photoionization mass spectrometry, and low-pressure photoionization mass spectrometry. Here, recent developments in direct mass spectrometry analysis of exhaled human breath are reviewed with regard to analytical performance (chemical sensitivity, selectivity, quantitative capabilities) and applications of the developed methods in disease diagnosis, targeted molecular detection, and real-time metabolic monitoring.

Sweat and odor in sportswear - A review

Sportswear worn next to the skin is easily soaked by sweat and may become a breeding ground for the microbiome, thus a source of malodor. Malodor can cause social embarrassment and discomfort to both wearer and others. Given the risks current deodorant products pose to nature and human life, the development of sustainable textiles for odor control comes to the forefront. This review introduces the odor-generating mechanism in clothing from the perspectives of perspiration composition and cutaneous microbiome. With the knowledge of the significant role of sweat in odor formation, the sweat distribution of the human body, measurement techniques, and advanced technologies developed for quick-dry function are presented in the second part. Lastly, odor management in sportswear is evaluated, covering the odor-assessing techniques, the effects of various textile materials, and emerging solutions in terms of antibacterial treatment, adsorbent materials, and photocatalytic degradations of odorous compounds. Overall, it is of both personal and social value to develop novel textile materials with odor-control functions by making use of natural materials and fabric designs.

Effect of anaerobic digestion on odor and ammonia emission from land-applied cattle manure

High ammonia (NH₃) and odor emission can occur after land application of liquid animal manure. This study was aimed at evaluating NH₃ loss and odor nuisance after field application of cattle manure and how it is affected by two anaerobic digestion strategies: i) digestion of cattle manure alone and ii) digestion with catch crops and dilution by water. A system of dynamic chambers with online measurements of NH₃ and odorous compounds (summarized as odor activity value, OAV) was used. Two experiments were conducted under different temperature conditions. The results demonstrated that anaerobic digestion did not affect NH₃ loss but did decrease OAV. Addition of catch crops and water to the digestion process reduced both NH₃ loss and OAV. Cool temperature in one of the experiments had a large effect on both NH₃ and odor emissions, and at high temperature the differences between treatments increased.

Policy-Related Gains in Urban Air Quality May Be Offset by Increased Emissions in a Warming Climate

Air quality policies have made substantial gains by reducing pollutant emissions from the transportation sector. In March 2020, New York City's activities were severely curtailed in response to the COVID-19 pandemic, resulting in 60-90% reductions in human activity. We continuously measured major volatile organic compounds (VOCs) during January-April 2020 and 2021 in Manhattan. Concentrations of many VOCs decreased significantly during the shutdown with variations in daily patterns reflective of human activity perturbations, resulting in a temporary ∼28% reduction in chemical reactivity. However, the limited effect of these dramatic measures was outweighed by larger increases in VOC-related reactivity during the anomalously warm spring 2021. This emphasizes the diminishing returns from transportation-focused policies alone and the risk of increased temperature-dependent emissions undermining policy-related gains in a warming climate.

Proton-transfer rate constants for the determination of organic indoor air pollutants by online mass spectrometry

Proton transfer reaction mass spectrometry (PTR-MS) has become an indispensable analytical tool for indoor related sciences. With high-resolution techniques not only is the online monitoring of the selected ions in the gas phase possible, but also, with some limitations, the identification of substance mixtures without chromatographic separation. The quantification is carried out with the help of kinetic laws, which require knowledge of the conditions in the reaction chamber, the reduced ion moblilities and the reaction rate constant k_PT under these conditions. Ion-dipole collision theory can be used to calculate k_PT. One approach is an extension of Langevin's equation and is known as average dipole orientation (ADO). In a further development, the analytical solution of ADO was replaced by trajectory analysis, which resulted in capture theory. The calculations according to ADO and capture theory require precise knowledge of the dipole moment and the polarizability of the respective target molecule. However, for many relevant indoor related substances, these data are insufficiently known or not known at all. Consequently, the dipole moment μ_D and polarizability α of 114 organic compounds that are frequently found in indoor air had to be determined using advanced quantum mechanical methods. This required the development of an automated workflow that performs conformer analysis before computing μ_D and α using density functional theory (DFT). Then the reaction rate constants with the H₃O⁺ ion are calculated according to the ADO theory (k_ADO), capture theory (k_cap) and advanced capture theory for different conditions in the reaction chamber. The kinetic parameters are evaluated with regard to their plausibility and critically discussed for their applicability in PTR-MS measurements.

Highly Sensitive and Selective Real-Time Breath Isoprene Detection using the Gas Reforming Reaction of MOF-Derived Nanoreactors

Real-time breath isoprene sensing provides noninvasive methods for monitoring human metabolism and early diagnosis of cardiovascular diseases. Nonetheless, the stable alkene structure and high humidity of the breath hinder sensitive and selective isoprene detection. In this work, we derived well-defined Co₃O₄@polyoxometalate yolk-shell structures using a metal-organic framework template. The inner space, including highly catalytic Co₃O₄ yolks surrounded by a semipermeable polyoxometalate shell, enables stable isoprene to be reformed to reactive intermediate species by increasing the gas residence time and the reaction with the inner catalyst. This sensor exhibited selective isoprene detection with an extremely high chemiresistive response (180.6) and low detection limit (0.58 ppb). The high sensing performance can be attributed to electronic sensitization and catalytic promotion effects. In addition, the reforming reaction of isoprene is further confirmed by the proton transfer reaction-quadrupole mass spectrometry analysis. The practical feasibility of this sensor in smart healthcare applications is exhibited by monitoring muscle activity during the workout.

Environmental and human health impacts of volatile organic compounds: A perspective review

Volatile organic compounds (VOCs) are synthetic chemicals that are broadly used in the production of numerous day-to-day products for residential and commercial-based applications. VOCs are naturally occurring in the environment; however, average annual emissions of man-made volatile organic compounds may have increased dramatically in recent decades. Although many factors were attributed to influencing volatile compounds' emission, only mankind's activities are mainly proclaimed. Since vehicle and industrial pollution are mounting for years and years, urban areas are highly prone to the impacts of VOCs. Generally, volatile compounds are highly spontaneous and readily react with the particles of ambiance and produce a polluted atmosphere through several physical and chemical reactions. Though the volatile compounds play an indispensable role in the manufacture and maintaining the stability of many products, the health impacts associated with their prolonged exposure are gaining attention as recent research reports underline the influence of a wide range of diseases and disorders. Likewise, since the modern way of life applies a lot of day-to-day chemicals, it is imperative to spread a wide knowledge and safety aspects about these chemicals so that people of a wide category can implement preventive measures according to their exposure and living style. In this context, the review article attempts to shed light on past and current updates concerning the relationship between VOCs exposure and environmental and human health impacts.

New particle formation at a peri-urban agricultural site

New Particle Formation (NPF) is a major source of ultrafine particles that affect both air quality and climate. Despite emissions from agricultural activities having a strong potential to lead to NPF, little is known about NPF within agricultural environments. The aim of the present study was to investigate the occurrence of NPF events at an agricultural site, and any potential relationship between agricultural emissions and NPF events. A field campaign was conducted for 3 months at the FR-Gri-ICOS site (France), at an experimental farm 25 km west of Paris city centre. 16 NPF events have been identified from the analysis of particle number size distributions; 8 during the daytime, and 8 during the night-time. High solar radiation and ozone mixing ratios were observed during the days NPF occurred, suggesting photochemistry plays a key role in daytime NPF. These events were also associated with higher levels of VOCs such as isoprene, methanol, or toluene compared to non-event days. However, ammonia levels were lower during daytime NPF events, contributing to the hypothesis that daytime NPF events were not related to agricultural activities. On the other hand, temperature and ozone were lower during the nights when NPF events were observed, whereas relative humidity was higher. During these nights, higher concentrations of NO₂ and ammonia were observed. As a result, agricultural activities, in particular the spreading of fertiliser on surrounding crops, are suspected to contribute to night-time NPF events. Finally, all the identified NPF events were also observed at SIRTA monitoring station 20 km from the FR-Gri ICOS site, showing that both night-time and daytime NPF events were regional processes. We hypothesise that night-time NPF may be related to fertiliser spreading over a regional scale, as opposed to the local activities at the farm. To our knowledge, this is the first time night-time NPF has been observed in the agricultural context.

Elevated ozone inhibits isoprene emission of a diploid and a triploid genotype of Populus tomentosa by different mechanisms

Ozone (O3) pollution affects plant growth and isoprene (ISO) emission. However, the response mechanism of isoprene emission rate (ISOrate) to elevated O3 (EO3) remains poorly understood. ISOrate was investigated in two genotypes (diploid and triploid) of Chinese white poplar (Populus tomentosa Carr.) exposed to EO3 in an open top chamber system. The triploid genotype had higher photosynthetic rate (A) and stomatal conductance (gs) than the diploid one. EO3 significantly decreased A, gs, and ISOrate of middle and lower leaves in both genotypes. In the diploid genotype, the reduction of ISOrate was caused by a systematic decrease related to ISO synthesis capacity, as indicated by decreased contents of the isoprene precursor dimethylallyl diphosphate and decreased isoprene synthase protein and activity. On the other hand, the negative effect of O3 on ISOrate of the triploid genotype did not result from inhibited ISO synthesis capacity, but from increased ISO oxidative loss within the leaf. Our findings will be useful for breeding poplar genotypes with high yield and lower ISOrate, depending on local atmospheric volatile organic compound/NOx ratio, to cope with both the rising O3 concentrations and increasing biomass demand. They can also inform the incorporation of O3 effects into process-based models of isoprene emission.

Volatile Organic Compound Fragmentation in the Afterglow of Pulsed Glow Discharge in Ambient Air

Glow discharge (GD) source gained an increased level of attention in relation to the analysis of volatile organic compounds (VOCs) since past work showed that this soft ionization method allowed direct analysis of VOCs with minimal fragmentation, however, the issue of fragmentation was not previously studied in detail. The aim of the present work was to investigate the effect of discharge conditions on VOC fragmentation in the system consisting of the cell with pulsed glow discharge and a time-of-flight mass spectrometer. Ionization of VOCs of different classes (hydrocarbons, alcohols, esters, and carboxylic acids) was investigated. A copper cathode with flat geometry was used. VOCs were ionized in the afterglow of short pulse glow discharge in the air. The use of discharge afterglow significantly reduces or eliminates the effects of ionization mechanisms other than Penning process, in particular, electron ionization. This significantly reduced VOC fragmentation and provided rather low limits of detection. Specific cluster formation was observed for alcohols and esters, which may facilitate their identification.

Strong isoprene emission response to temperature in tundra vegetation

Emissions of biogenic volatile organic compounds (BVOCs) are a crucial component of biosphere-atmosphere interactions. In northern latitudes, climate change is amplified by feedback processes in which BVOCs have a recognized, yet poorly quantified role, mainly due to a lack of measurements and concomitant modeling gaps. Hence, current Earth system models mostly rely on temperature responses measured on vegetation from lower latitudes, rendering their predictions highly uncertain. Here, we show how tundra isoprene emissions respond vigorously to temperature increases, compared to model results. Our unique dataset of direct eddy covariance ecosystem-level isoprene measurements in two contrasting ecosystems exhibited Q₁₀ (the factor by which the emission rate increases with a 10 °C rise in temperature) temperature coefficients of up to 20.8, that is, 3.5 times the Q₁₀ of 5.9 derived from the equivalent model calculations. Crude estimates using the observed temperature responses indicate that tundra vegetation could enhance their isoprene emissions by up to 41% (87%)-that is, 46% (55%) more than estimated by models-with a 2 °C (4 °C) warming. Our results demonstrate that tundra vegetation possesses the potential to substantially boost its isoprene emissions in response to future rising temperatures, at rates that exceed the current Earth system model predictions.

Traffic, transport, and vegetation drive VOC concentrations in a major urban area in Texas

The population of Texas has increased rapidly in the past decade. The San Antonio Field Study (SAFS) was designed to investigate ozone (O₃) production and precursors in this rapidly changing, sprawling metropolitan area. There are still many questions regarding the sources and chemistry of volatile organic compounds (VOCs) in urban areas like San Antonio which are affected by a complex mixture of industry, traffic, biogenic sources and transported pollutants. The goal of the SAFS campaign in May 2017 was to measure inorganic trace gases, VOCs, methane (CH₄), and ethane (C₂H₆). The SAFS field design included two sites to better assess air quality across the metro area: an urban site (Traveler's World; TW) and a downwind/suburban site (University of Texas at San Antonio; UTSA). The results indicated that acetone (2.52 ± 1.17 and 2.39 ± 1.27 ppbv), acetaldehyde (1.45 ± 1.02 and 0.93 ± 0.45 ppbv) and isoprene (0.64 ± 0.49 and 1.21 ± 0.85 ppbv; TW and UTSA, respectively) were the VOCs with the highest concentrations. Additionally, positive matrix factorization showed three dominant factors of VOC emissions: biogenic, aged urban mixed source, and acetone. Methyl vinyl ketone and methacrolein (MVK + MACR) exhibited contributions from both secondary photooxidation of isoprene and direct emissions from traffic. The C₂H₆:CH₄ demonstrated potential influence of oil and gas activities in San Antonio. Moreover, the high O₃ days during the campaign were in the NO_x-limited O₃ formation regime and were preceded by evening peaks in select VOCs, NO_x and CO. Overall, quantification of the concentration and trends of VOCs and trace gases in a major city in Texas offers vital information for general air quality management and supports strategies for reducing O₃ pollution. The SAFS campaign VOC results will also add to the growing body of literature on urban sources and concentrations of VOCs in major urban areas.

Global review of source apportionment of volatile organic compounds based on highly time-resolved data from 2015 to 2021

Highly time-resolved data for volatile organic compounds (VOCs) can now be monitored. Source analyses of such high time-resolved concentrations provides key information for controlling VOC emissions. This work reviewed the literature on VOCs source analyses published from 2015 to 2021, and assesses the state-of-the-art and the existing issues with these studies. Gas chromatography system and direct-inlet mass spectrometry are the main monitoring tools. Quality control (QC) of the monitoring process is critical prior to analysis. QC includes inspection and replacement of instrument consumables, calibration curve corrections, and reviewing the data. Approximately 54% published papers lacked details on the quantitative evaluation of the effectiveness of QC measures. Among the reviewed works, the number of monitored species varied from 5 to 119, and fraction of papers with more than 90 monitored species increased yearly. US EPA PMF v5.0 was the most commonly used (∼86%) for VOC source analyses. However, conventional source apportionment directly uses the measured VOCs and may be problematic given the impacts of dispersion and photochemical losses, uncertainty setting of VOCs data, factor resolution, and factor identification. Excluding species with high-reactivity or estimation of corrected concentrations were often applied to reduce the influence of photochemical reactions on the results. However, most reports did not specify the selection criteria or the specific error fraction values in the uncertainty estimation. Model diagnostic indexes were used in 99% of the reports for PMF analysis to determine the factor resolution. Due to lack of known local source profiles, factor identification was mainly achieved using marker species and characteristic species ratios. However, multiple sources had high-collinearity and the same species were often used to identify different sources. Vehicle emissions and fuel evaporation were the primary contributors to VOCs around the world. Contribution of coal combustion in China was substantially higher than in other countries.

Qualitative and quantitative determination of butanol in latex paint by fast gas chromatography proton transfer reaction mass spectrometry

Butanol is a common organic solvent used in latex paint, and one of its isomers, tert-butanol, is toxic and can cause potential harm to the human body. Therefore, it is of great significance to develop a qualitative and quantitative detection method for butanol isomers. In this study, we combined the advantages of rapid detection of proton transfer reaction mass spectrometry (PTR-MS) with the separation and qualitative capabilities of gas chromatography-mass spectrometry (GC-MS) to achieve the detection of isomers, building a fast gas chromatography proton transfer reaction mass spectrometry (FastGC-PTR-MS) equipment. Firstly, the developed technology was optimized using standard samples of several common volatile organic compounds. The retention times of acetonitrile, acetone, and alcohols were less than 50 s, and the retention times of the benzene series were less than 110 s, on the premise that these isomers could be basically separated (resolution R > 1.0). Compared with a commercial GC-MS equipment, the detection times were shortened by 5-6 times and 2-4 times, respectively. Then the FastGC-PTR-MS was applied to detect the isomers of butanol in latex paint. The results showed that the headspace of brand D latex paint mainly contained five substances: tert-butanol, n-butanol, acetaldehyde, methanol, and acetone. Tert-butanol and n-butanol could be completely separated (R > 1.5). The concentration of tert-butanol was 4.41 ppmv, far below the 100 ppmv maximum allowable workplace concentration. The developed FastGC-PTR-MS can be used for rapid qualitative and quantitative detection of butanol isomers in latex paint. The new equipment has the potential to play an important role in indoor environmental safety applications.

The need for multicomponent gas standards for breath biomarker analysis

Exhaled breath is a non-invasive, information-rich matrix with the potential to diagnose or monitor disease, including infectious disease. Despite significant effort dedicated to biomarker identification in case control studies, very few breath tests are established in practice. In this topical review, we identify how gas standards support breath analysis today and what is needed to support further expansion and translation to practice. We examine forensic and clinical breath tests and discuss how confidence has been built through unambiguous biomarker identification and quantitation supported by gas calibration standards. Based on this discussion, we identify a need for multicomponent gas standards with part-per-trillion to part-per-million concentrations. We highlight National Institute of Standards and Technology (NIST) gas standards developed for atmospheric measurements that are also relevant to breath analysis and describe investigations of long-term stability, chemical reactions, and interactions with gas cylinder wall treatments. An overview of emerging online instruments and their need for gas standards is also presented. This review concludes with a discussion of our ongoing research to examine the feasibility of producing multicomponent gas standards at breath-relevant concentrations. Such standards could be used to investigate interference from ubiquitous endogenous compounds and as a starting point for standards tailored to specific breath tests.

Evaluation of a New DC-Ion Funnel Drift Tube for Use in Proton Transfer Reaction Mass Spectrometry

We have developed and characterized a novel drift tube called the direct current-ion funnel (DC-ion funnel) drift tube, consisting of 20 traditional ring electrodes and 5 new DC-focusing electrodes (DC-FEs) for use in proton transfer reaction mass spectrometry (PTR-MS). Ion trajectory simulations demonstrate the ion focusing effect of the DC-FE and DC-ion funnel drift tube. Further comparative experiments show that the PTR-MS with the novel DC-ion funnel drift tube has a higher sensitivity (3.8-7.3 times for the volatile organic compounds considered in this work) than the PTR-MS with a traditional drift tube. Different from conventional radiofrequency (rf) focusing methods, the DC-ion funnel drift tube can realize ion focusing with only a DC electric field and no additional rf power supply, which makes it especially suitable for instruments requiring miniaturization and low power consumption to improve detection sensitivity. In addition, the DC-ion funnel drift tube can easily be coupled to other types of mass spectrometers to increase their detection sensitivity.

Mass spectrometry in food authentication and origin traceability

Food authentication and origin traceability are popular research topics, especially as concerns about food quality continue to increase. Mass spectrometry (MS) plays an indispensable role in food authentication and origin traceability. In this review, the applications of MS in food authentication and origin traceability by analyzing the main components and chemical fingerprints or profiles are summarized. In addition, the characteristic markers for food authentication are also reviewed, and the advantages and disadvantages of MS-based techniques for food authentication, as well as the current trends and challenges, are discussed. The fingerprinting and profiling methods, in combination with multivariate statistical analysis, are more suitable for the authentication of high-value foods, while characteristic marker-based methods are more suitable for adulteration detection. Several new techniques have been introduced to the field, such as proton transfer reaction mass spectrometry, ambient ionization mass spectrometry (AIMS), and ion mobility mass spectrometry, for the determination of food adulteration due to their fast and convenient analysis. As an important trend, the miniaturization of MS offers advantages, such as small and portable instrumentation and fast and nondestructive analysis. Moreover, many applications in food authentication are using AIMS, which can help food authentication in food inspection/field analysis. This review provides a reference and guide for food authentication and traceability based on MS.

Multisize particulate matter and volatile organic compounds in arid and semiarid areas of Northwest China

To investigate the chemical components, sources, and interactions of particulate matter (PM) and volatile organic compounds (VOCs), a field campaign was implemented during the spring of 2018 in nine cities in northwestern (NW) China. PM was mainly contributed by organic matter and water-soluble inorganic ions (41% for PM₁₀ and approximately 60% for PM_2.5 and PM₁). Two typical haze patterns were observed: anthropogenic pollution type (AP-type), wherein contributions of sulfate, nitrate, and ammonium (SNA) increased, and dust pollution type (DP-type), wherein contributions of Ca²⁺ increased and SNA decreased. Source appointment suggested that regional sources contributed close to half to PM_2.5 pollution (40% for AP-type and 50% for DP-type). Thus, sources from regional transport are also important for haze and dust pollution. The ranking of VOC concentrations was methanol > acetaldehyde > formic acid + ethanol > acetone. Compared with other cities, there are higher oxygenated VOCs (OVOCs) and lower aromatics in NW China. The relationships between VOCs and PM were discussed. The dominating secondary organic aerosols (SOA) formation potential precursors were C₁₀-aromatics, xylene, and styrene under low-nitrogen oxide (NOx) conditions, and benzene, C₁₀-aromatics, and toluene dominated under high-NOx conditions. The quadratic polynomial was the most suitable fitting model for their correlation, and the results suggested that VOC oxidations explained 6.1-10.8% and 9.9-20.7% of SOA formation under high-NOx and low-NOx conditions, respectively.

Real-Time Visualization of Scent Accumulation Reveals the Frequency of Floral Scent Emissions

Flowers emit a bouquet of volatiles to attract pollinators or to protect flowers from pathogen and herbivore attacks. Most floral volatiles are synthesized in the cytoplasm of petals and released into the headspace at a specific time of day. Various floral scent sampling methods coupled with gas chromatography-mass spectrometry have been used to measure the quality and quantity of floral volatiles. However, little is known about the emission patterns of floral scents. In most cases, it is still unclear whether floral scents emit continuously or discontinuously. Here we measured the frequency with which lily flowers emit scents using optical interferometry. By analyzing the refractive index difference between volatile organic compounds and ambient air, we were able to visualize the accumulation of the volatile vapors. The frequency of volatile emission was calculated from the unique footprint of temporal power spectrum maps. Based on these real-time measurements, we found that lily flowers emit the volatile compounds discontinuously, with pulses observed around every 10-50 min.

Breath chemical markers of sexual arousal in humans

The chemical composition of exhaled breath was examined for volatile organic compound (VOC) indicators of sexual arousal in human beings. Participants (12-male, 12-female) were shown a randomized series of three emotion-inducing 10-min film clips interspersed with 3-min neutral film clips. The films caused different arousals: sports film (positive-nonsexual); horror film (negative-nonsexual); and erotic (sexual) that were monitored with physiological measurements including genital response and temperature. Simultaneously the breath was monitored for VOC and CO₂. While some breath compounds (methanol and acetone) changed uniformly irrespective of the film order, several compounds did show significant arousal associated changes. For both genders CO₂ and isoprene decreased in the sex clip. Some male individuals showed particularly strong increases of indole, phenol and cresol coincident with sexual arousal that decreased rapidly afterwards. These VOCs are degradation products of tyrosine and tryptophan, precursors for dopamine, noradrenalin, and serotonin, and therefore represent potential breath markers of sexual arousal.

Detailed Speciation of Non-Methane Volatile Organic Compounds in Exhaust Emissions from Diesel and Gasoline Euro 5 Vehicles Using Online and Offline Measurements

The characterization of vehicle exhaust emissions of volatile organic compounds (VOCs) is essential to estimate their impact on the formation of secondary organic aerosol (SOA) and, more generally, air quality. This paper revises and updates non-methane volatile organic compounds (NMVOCs) tailpipe emissions of three Euro 5 vehicles during Artemis cold urban (CU) and motorway (MW) cycles. Positive matrix factorization (PMF) analysis is carried out for the first time on proton transfer reaction time-of-flight mass spectrometer (PTR-ToF-MS) datasets of vehicular emission. Statistical analysis helped to associate the emitted VOCs to specific driving conditions, such as the start of the vehicles, the activation of the catalysts, or to specific engine combustion regimes. Merged PTR-ToF-MS and automated thermal desorption gas chromatography mass spectrometer (ATD-GC-MS) datasets provided an exhaustive description of the NMVOC emission factors (EFs) of the vehicles, thus helping to identify and quantify up to 147 individual compounds. In general, emissions during the CU cycle exceed those during the MW cycle. The gasoline direct injection (GDI) vehicle exhibits the highest EF during both CU and MW cycles (252 and 15 mg/km), followed by the port-fuel injection (PFI) vehicle (24 and 0.4 mg/km), and finally the diesel vehicle (15 and 3 mg/km). For all vehicles, emissions are dominated by unburnt fuel and incomplete combustion products. Diesel emissions are mostly represented by oxygenated compounds (65%) and aliphatic hydrocarbons (23%) up to C₂₂, while GDI and PFI exhaust emissions are composed of monoaromatics (68%) and alkanes (15%). Intermediate volatility organic compounds (IVOCs) range from 2.7 to 13% of the emissions, comprising essentially linear alkanes for the diesel vehicle, while naphthalene accounts up to 42% of the IVOC fraction for the gasoline vehicles. This work demonstrates that PMF analysis of PTR-ToF-MS datasets and GC-MS analysis of vehicular emissions provide a revised and deep characterization of vehicular emissions to enrich current emission inventories.

Long-chain alkanes in the atmosphere: A review

As a representative species of intermediate volatile organic compounds (IVOCs), long-chain alkanes are considered to be important precursors of secondary organic aerosols (SOA) in the atmosphere. This work reviews the previous studies on long-chain alkanes in the atmosphere: (1) the detection methods and filed observations of long-chain alkanes in both gas and particle phases are summarized briefly; (2) the laboratory studies of long chain alkanes are reviewed, the kinetic data, reaction mechanism, SOA yields, and physicochemical properties of SOA are included in detail; (3) the research progress related to model simulations of long-chain alkanes are also discussed. In addition, based on available research results, several perspective contents are proposed that can be used as a guideline for future research plans.

Tracer-based characterization of source variations of ambient isoprene mixing ratios in a hillocky megacity, India, influenced by the local meteorology

The ambient biogenic volatile organic compounds (BVOCs), mainly isoprene, are potentially involved in the formation of secondary pollutants, hence, they are significant in terms of air quality and climate. Although the largest sources of BVOCs are tropical regions, the measurements of isoprene in the Indian subcontinent are limited. We conducted the measurements of isoprene, benzene, and toluene at an urban site in a hillocky megacity of India using a high-sensitivity proton transfer reaction quadrupole mass spectrometer (PTR-QMS). The mixing ratios of isoprene were compared with those of aromatic compounds like benzene and toluene, which represent typical anthropogenic VOCs. Isoprene and isoprene/benzene (>5 ppbv ppbv^-1) showed higher levels in the pre-monsoon months, most likely due to large emissions by urban vegetation during physiological activities in plants which was enhanced by the high ambient temperatures and solar radiation. While Benzene and toluene showed higher mixing ratios during winter, which were due to shallower boundary layer depths and transport of air masses from polluted Indo-Gangetic Plain during this season. The mixing ratios of VOCs show significant diurnal variation as a result of their different origins and the role of different meteorological parameters. The robust emission ratios of isoprene/benzene obtained from nighttime data were used to separate the non-anthropogenic and anthropogenic isoprene emissions. ∼30% enhancement observed in non-anthropogenic emissions to isoprene from winter to pre-monsoon season when temperatures and solar radiation were stronger, although traffic in the city. Isoprene/benzene ratio at lower temperatures (<25 °C) and solar radiation (<100 W m^-2) was predominantly controlled by anthropogenic sources. Overall, toluene and isoprene are the most frequent species in terms of having the highest ozone-forming potential (OFP) values but biogenic isoprene became more important to ozone formation during the afternoon hours in the pre-monsoon months with high air temperatures (>25 °C).

Highly Selective and Sensitive Detection of Breath Isoprene by Tailored Gas Reforming: A Synergistic Combination of Macroporous WO3 Spheres and Au Catalysts

Precise detection of breath isoprene can provide valuable information for monitoring the physical and physiological status of human beings or for the early diagnosis of cardiovascular diseases. However, the extremely low concentration and low chemical reactivity of breath isoprene hamper the selective and sensitive detection of isoprene using oxide semiconductor chemiresistors. Herein, we report that macroporous WO₃ microspheres whose inner macropores are surrounded by Au nanoparticles exhibit a high response (resistance ratio = 11.3) to 0.1 ppm isoprene under highly humid conditions at 275 °C and an extremely low detection limit (0.2 ppb). Furthermore, the sensor showed excellent selectivity to isoprene over five interferants that could be exhaled by humans. Notably, the selectivity to isoprene is critically dependent on the location of Au nanocatalysts and macroporosity. The mechanism underlying the selective isoprene detection is investigated in relation to the reforming of less reactive isoprene into more reactive intermediate species promoted by macroporous catalytic reactors, which is confirmed by the analysis using a proton transfer reaction quadrupole mass spectrometer. The sensor for breath analysis has high potential for simple physical and physiological monitoring as well as disease diagnosis.

Atmospheric gaseous organic acids in winter in a rural site of the North China Plain

Organic acids are important contributors to the acidity of atmospheric precipitation, but their existence in the Chinese atmosphere is largely unclear. In this study, twelve atmospheric gaseous organic acids, including C₁-C₉ alkanoic acids, methacrylic acid, pyruvic acid, and benzoic acid, were observed in the suburb of Wangdu, Hebei Province, a typical rural site in the northern China plain from 16^th December, 2018 to 22^nd January, 2019, using a Vocus® Proton-Transfer-Reaction time-of-flight mass spectrometer (Vocus PTR-ToF). The quantification of C₂-C₄ alkanoic acids by the Vocus PTR-ToF was calibrated according to the titration of a NaOH solution by C₂-C₄ alkanoic acids from home-made permeation sources, and the other organic acids except for formic acid were quantified based on the k_cap-sensitivity linearity in the Vocus PTR-ToF, whereas formic acid was not quantified because our instrument setting led to a significant underestimation in its concentration. The average total concentration of eleven gaseous organic acids was 6.96 ± 5.20 ppbv (parts per billion by volume). The average concentration of acetic acid was the highest (3.86 ± 3.00 ppbv), followed by propanoic acid, butyric acid, and methacrylic acid. Domestic straw burning was likely the dominant source of the observed gaseous organic acids according to the good correlations between acetonitrile and organic acids and between particulate K⁺ and organic acids, and traffic emissions could also have contributed. During episodes with continuously high concentrations of organic acids, short-distance transport dominated in Wangdu according to the backward trajectory analysis. Baoding, Shijiazhuang, and Hengshui areas were the main source areas based on potential source contribution function and concentration weighing track analysis.

Emission Ratios and Source Identification of VOCs in Moscow in 2019–2020

Measurements of CO and 15 volatile organic compounds (VOCs) at the IAP-RAS (A.M. Obukhov Institute of Atmospheric Physics) site located in the center of Moscow were analyzed. Acetaldehyde, ethanol, 1.3-butadiene, isoprene, toluene and C-8 aromatics were established to be the main ozone precursors in the observed area, providing up to 82% of the total ozone formation potential of the VOCs measured. Diurnal and seasonal variations of the compounds are discussed. The concentrations of anthropogenic VOCs (acetaldehyde, benzene, 1.3-butadiene, toluene, and C-8 aromatics) did not exceed their maximum permissible levels, reaching their maxima in summer and autumn in the morning and evening hours. Biogenic ethanol and isoprene were the highest in summer midday but their concentrations were low enough (up to 4 and 0.4 ppbv, respectively) due to small vegetation area around the site. Emission ratios (ERs) for the main ozone precursors—acetaldehyde, ethanol, 1.3-butadiene, isoprene, toluene, and C-8 aromatics—were estimated from two-sided linear regression fits using benzene and CO as tracers for anthropogenic emissions, with spatial and temporal filters being applied to account for the influence of chemistry and local emission sources. The best estimates of ERs were obtained using benzene as a reference species. Anthropogenic fractions of VOCs (AFs) were then estimated. As expected, acetaldehyde, toluene, 1.3-butadiene, and C8aromatics were entirely anthropogenic and emitted mainly from urban vehicle exhausts throughout the day, both in summer and in winter. AFs of isoprene and ethanol did not exceed 30% and 50% in summer, respectively, during both daytime and nighttime hours. In winter, the anthropogenic fractions of isoprene and ethanol were slightly higher (up to 35% and 60%, respectively).

Nitrous acid production and uptake by Zea mays plants in growth chambers in the presence of nitrogen dioxide

Nitrous acid (HONO) photolysis is an important atmospheric reaction that leads to the formation of hydroxyl radicals (OH), the main diurnal atmospheric oxidants. The process of HONO formation remains unclear, and comparisons between field measurements and model results have highlighted the presence of unknown HONO sources. HONO production on plant surfaces was recently suggested to contribute to atmospheric HONO formation, but there is limited information on the quantification of HONO production and uptake by plants. To address this gap in the existing knowledge, the current study investigated HONO exchange on living Zea mays plants. Experiments were conducted in growth chambers under controlled experimental conditions (temperature, relative humidity, NO₂ mixing ratio, light intensity, CO₂ mixing ratio) at temperatures ranging between 283 and 299 K. To investigate the effect of drought on HONO plant-atmosphere exchanges, experiments were carried out on two sets of Zea mays plants exposed to two different water supply conditions during their growth: optimal watering (70% of the field capacity) and water stress (30% of the field capacity). Results indicated that the uptake of HONO by control Zea mays plants increased linearly with ambient temperature, and was correlated with CO₂ assimilation for temperatures ranging from 283 to 299 K. At 299 K, HONO production on the leaves offset this uptake and Zea mays plants were a source of HONO, with a net production rate of 27 ± 7 ppt h^-1. Deposition velocities were higher for HONO than CO₂, suggesting a higher mesophyll resistance for CO₂ than HONO. As water stress reduced the stomatal opening, it also decreased plant-atmosphere gas exchange. Thus, climate change, which may limit the availability of water, will have an impact on HONO exchange between plants and the atmosphere.

The potential of NO+ and O2 +• in switchable reagent ion proton transfer reaction time-of-flight mass spectrometry

Selected ion flow tube mass spectrometry (SIFT-MS) and proton transfer reaction mass spectrometry with switchable reagent ion capability (PTR+SRI-MS) are analytical techniques for real-time qualification and quantification of compounds in gas samples with trace level concentrations. In the detection process, neutral compounds-mainly volatile organic compounds-are ionized via chemical ionization with ionic reagents or primary ions. The most common reagent ions are H₃ O⁺ , NO⁺ and O₂ ^+• . While ionization with H₃ O⁺ occurs by means of proton transfer, the ionization via NO⁺ and O₂ ^+• offers a larger variety on ionization pathways, as charge transfer, hydride abstraction and so on are possible. The distribution of the reactant into various reaction channels depends not only on the usage of either NO⁺ or O₂ ^+• , but also on the class of analyte compounds. Furthermore, the choice of the reaction conditions as well as the choice of either SIFT-MS or PTR+SRI-MS might have a large impact on the resulting products. Therefore, an overview of both NO⁺ and O₂ ^+• as reagent ions is given, showing differences between SIFT-MS and PTR+SRI-MS as used analytical methods revealing the potential how the knowledge obtained with H₃ O⁺ for different classes of compounds can be extended with the usage of NO⁺ and O₂ ^+• .

Ecosystem fluxes during drought and recovery in an experimental forest

[Figure: see text].

Clair JM, Tanner DJ, Ullmann K, Veres PR, Walega J, Warneke C, Washenfelder RA, Weibring P, Wisthaler A, Wolfe GM, Womack CC, Yokelson RJ. Ozone chemistry in western U.S. wildfire plumes

Wildfires are a substantial but poorly quantified source of tropospheric ozone (O₃). Here, to investigate the highly variable O₃ chemistry in wildfire plumes, we exploit the in situ chemical characterization of western wildfires during the FIREX-AQ flight campaign and show that O₃ production can be predicted as a function of experimentally constrained OH exposure, volatile organic compound (VOC) reactivity, and the fate of peroxy radicals. The O₃ chemistry exhibits rapid transition in chemical regimes. Within a few daylight hours, the O₃ formation substantially slows and is largely limited by the abundance of nitrogen oxides (NO_x). This finding supports previous observations that O₃ formation is enhanced when VOC-rich wildfire smoke mixes into NO_x-rich urban plumes, thereby deteriorating urban air quality. Last, we relate O₃ chemistry to the underlying fire characteristics, enabling a more accurate representation of wildfire chemistry in atmospheric models that are used to study air quality and predict climate.

Chemistry of Functionalized Reactive Organic Intermediates in the Earth's Atmosphere: Impact, Challenges, and Progress

The gas-phase oxidation of organic compounds is an important chemical process in the Earth's atmosphere. It governs oxidant levels and controls the production of key secondary pollutants, and hence has major implications for air quality and climate. Organic oxidation is largely controlled by the chemistry of a few reactive intermediates, namely, alkyl (R) radicals, alkoxy (RO) radicals, peroxy (RO₂) radicals, and carbonyl oxides (R₁R₂COO), which may undergo a number of unimolecular and bimolecular reactions. Our understanding of these intermediates, and the reaction pathways available to them, is based largely on studies of unfunctionalized intermediates, formed in the first steps of hydrocarbon oxidation. However, it has become increasingly clear that intermediates with functional groups, which are generally formed later in the oxidation process, can exhibit fundamentally different reactivity than unfunctionalized ones. In this Perspective, we explore the unique chemistry available to functionalized organic intermediates in the Earth's atmosphere. After a brief review of the canonical chemistry available to unfunctionalized intermediates, we discuss how the addition of functional groups can introduce new reactions, either by changing the energetics or kinetics of a given reaction or by opening up new chemical pathways. We then provide examples of atmospheric reaction classes that are available only to functionalized intermediates. Some of these, such as unimolecular H-shift reactions of RO₂ radicals, have been elucidated only relatively recently, and can have important impacts on atmospheric chemistry (e.g., on radical cycling or organic aerosol formation); it seems likely that other, as-yet undiscovered reactions of (multi)functional intermediates may also exist. We discuss the challenges associated with the study of the chemistry of such intermediates and review novel experimental and theoretical approaches that have recently provided (or hold promise for providing) new insights into their atmospheric chemistry. The continued use and development of such techniques and the close collaboration between experimentalists and theoreticians are necessary for a complete, detailed understanding of the chemistry of functionalized intermediates and their impact on major atmospheric chemical processes.

Measurement and minutely-resolved source apportionment of ambient VOCs in a corridor city during 2019 China International Import Expo episode

In this study, real-time measurement of Volatile Organic Compounds (VOCs) was conducted at an urban site in Changzhou, a typical corridor city in the Yangtze River Delta (YRD) region in China, by Proton-Transfer-Reaction Time-of-Flight Mass Spectrometry (PTR-ToF-MS) during 2019 China International Import Expo (CIIE) episode. An improved method based on Air Quality Index (AQI) value is applied to identify polluted and clean periods. Diurnal pattern of VOC levels revealed elevated photochemical reactivity during polluted periods. Five VOC sources were identified by Positive Matrix Factorization (PMF) model, including secondary formation (22.71 ± 12.33%), biogenic (21.50% ± 11.76%), solvent usage (20.50 ± 10.07%), vehicle exhaust (18.32 ± 8.32%), and industrial process and fuel usage (16.96 ± 13.21%). The mean contribution of vehicular exhaust was 10.84% higher during the nighttime than the daytime under polluted days. The biogenic source contributed more during clean periods, while the secondary formation presented the opposite. Spatial analysis displayed that the VOC concentration was higher in the S and SSE. In terms of the regional transport, short-distance air masses from the northeast and the south within the YRD region led to high VOC levels and biogenic VOC derived from the ocean might affect the entire region. Stringent emission control policies enforced over the YRD for 2019 CIIE provided an excellent opportunity to determine the source-receptor response. As joint control area, the VOC level of Changzhou exhibited a substantial reduction and the VOC amounts emitted by solvent usage showed the biggest decrease (-58%). The findings of this study highlight the superiority of high time-resolved data in identifying the dynamic variation pattern (with the change of time and wind) of VOC levels and emission intensities.

Ethanol-based disinfectant sprays drive rapid changes in the chemical composition of indoor air in residential buildings

The COVID-19 pandemic has resulted in increased usage of ethanol-based disinfectants for surface inactivation of SARS-CoV-2 in buildings. Emissions of volatile organic compounds (VOCs) and particles from ethanol-based disinfectant sprays were characterized in real-time (1 Hz) via a proton transfer reaction time-of-flight mass spectrometer (PTR-TOF-MS) and a high-resolution electrical low-pressure impactor (HR-ELPI+), respectively. Ethanol-based disinfectants drove sudden changes in the chemical composition of indoor air. VOC and particle concentrations increased immediately after application of the disinfectants, remained elevated during surface contact time, and gradually decreased after wiping. The disinfectants produced a broad spectrum of VOCs with mixing ratios spanning the sub-ppb to ppm range. Ethanol was the dominant VOC emitted by mass, with concentrations exceeding 103 μg m-3 and emission factors ranging from 101 to 102 mg g-1. Listed and unlisted diols, monoterpenes, and monoterpenoids were also abundant. The pressurized sprays released significant quantities (104-105 cm-3) of nano-sized particles smaller than 100 nm, resulting in large deposited doses in the tracheobronchial and pulmonary regions of the respiratory system. Inhalation exposure to VOCs varied with time during the building disinfection events. Much of the VOC inhalation intake (>60 %) occurred after the disinfectant was sprayed and wiped off the surface. Routine building disinfection with ethanol-based sprays during the COVID-19 pandemic may present a human health risk given the elevated production of volatile chemicals and nano-sized particles.

Measurements of Volatile Organic Compounds During the COVID-19 Lockdown in Changzhou, China

The COVID-19 outbreak in 2020 prompted strict lockdowns, reduced human activity, and reduced emissions of air pollutants. We measured volatile organic compounds (VOCs) using a proton-transfer-reaction mass spectrometry instrument in Changzhou, China from 8 January through 27 March, including periods of pre-lockdown, strict measures (level 1), and more relaxed measures (level 2). We analyze the data using positive matrix factorization and resolve four factors: textile industrial emissions (62 ± 10% average reduction during level 1 relative to pre-lockdown), pharmaceutical industrial emissions (40 ± 20%), traffic emissions (71 ± 10%), and secondary chemistry (20 ± 20%). The two industrial sources showed different responses to the lockdown, so emissions from the industrial sector should not be scaled uniformly. The quantified changes in VOCs due to the lockdowns constrain emission inventories and inform chemistry-transport models, particularly for sectors where activity data are sparse, as the effects of lockdowns on air quality are explored.

Fugitive Emissions of Volatile Organic Compounds from a Tailings Pond in the Oil Sands Region of Alberta

Tailings ponds in the oil sands (OS) region in Alberta, Canada, have been associated with fugitive emissions of volatile organic compounds (VOCs) and other pollutants to the atmosphere. However, the contribution of tailings ponds to the total fugitive emissions of VOCs from OS operations remains uncertain. To address this knowledge gap, a field study was conducted in the summer of 2017 at Suncor's Pond 2/3 to estimate emissions of a suite of pollutants including 68 VOCs using a combination of micrometeorological methods and measurements from a flux tower. The results indicate that in 2017, Pond 2/3 was an emission source of 3322 ± 727 tons of VOCs including alkanes, aromatics, and oxygenated and sulfur-containing organics. While the total VOC emissions were approximately a factor of 2 higher than those reported by Suncor, the individual VOC species emissions varied by up to a factor of 12. A chemical mass balance (CMB) receptor model was used to estimate the contribution of the tailings pond to VOC pollution events in a nearby First Nations and Metis community in Fort McKay. CMB results indicate that Suncor Pond 2/3 contributed up to 57% to the total mass of VOCs measured at Fort McKay, reinforcing the importance of accurate VOC emission estimation methods for tailings ponds.