Design and in-situ biomimetic fabrication of a high-density strain sensor array for parachute canopy fabric

In-situ monitoring of non-uniform strains in spacecraft parachute canopies is essential to ensure safe landings. Traditional wearable strain sensors struggle to meet high-resolution measurement requirements due to their low density. In-situ inkjet printing offers a promising solution for fabricating high-density strain sensor arrays directly on the fabric surface. However, capillary effects in the canopy fabric cause droplet leakage, hindering stable printing. To address this, we drew inspiration from nature, using modified silane to mimic the wax layer of coconut husk for modifying the canopy fabric, which enabled the in-situ fabrication of a strain sensor array via inkjet printing. This modification overcame capillary effects and balanced the fabric's wettability, essential for stable printing. Furthermore, a layered printing strategy was designed to increase sensor density to 4 units·cm-2, facilitating high-resolution measurement of non-uniform strains in the canopy. This study offers a feasible approach for developing sensors for large-scale parachute strain measurements.

Electrostatic Tailoring of Freestanding Polymeric Films for Multifunctional Thermoelectrics, Hydrogels, and Actuators

Organic conducting polymer poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) has garnered enormous attention in organic electronics due to its low-cost solution processability, highly tunable conductivity, superior mechanical flexibility, and good biocompatibility together with excellent atmospheric stability. Nevertheless, limited electrical properties and unfavorable water instability of pristine PEDOT:PSS film impede its further implementation in a broad spectrum of practical applications. In this work, the successful tailoring of the intrinsic electrostatic interaction within PEDOT:PSS and consequent optimized electrical properties are enabled by a simple yet effective ionic salt post-treatment strategy. The choice of zinc di[bis(trifluoromethylsulfonyl)imide] (Zn(TFSI)2) not only endows the post-treated PEDOT:PSS film with high electrical properties but also other compelling characteristics, including superior water stability, excellent mechanical flexibility, and fast humidity responsiveness. Multidimensional characterizations are conducted to gain in-depth insights into the mechanisms underlying such improved performance, ranging from intermolecular interactions, polymer conformations, and doping levels to microstructural characteristics. Benefiting from these versatile properties, the as-prepared freestanding Zn(TFSI)2-post-treated PEDOT:PSS films can serve as promising candidates for high-performance polymeric materials integrated into multifunctional flexible electronics, including thermoelectric power generators, conductive hydrogels, and humidity-responsive actuators. This study demonstrates a facile methodology for the exploration of multifunctional conducting polymers, whose implications can extend across a wide range of next-generation wearable devices, bioelectronics, and soft robotics.

Highly conductive broadband transparent DMSO-doped PEDOT: PSS electrodes

The conductive polymer poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT: PSS) is considered as a flexible electrode material that can replace traditional electrodes. However, its performance optimization, practical application, and related research are primarily focused on a single band. In this study, we designed and prepared a broadband transparent electrode with a conductivity of up to 1300 S cm-1 based on dimethyl sulfoxide (DMSO)-doped PEDOT: PSS. The as-fabricated PEDOT: PSS electrode achieved high transmittance in a wide range from a visible to terahertz band. The physical mechanism of its high conductivity and broadband transparency is studied by using a first-principle calculation. Furthermore, the transparent electrode exhibited excellent stability after 100,000 cycles of electrical cycling and 200°C of heating. Based on the transparent electrode, we fabricated a liquid crystal phase shifter with an extended operating range, showing its efficient driving performance as an electrode. The characterization and optimization of the properties of PEDOT: PSS in this work provide guidance for the application of PEDOT: PSS in broadband optical devices.

Highly Electrically Conductive PEDOT:PSS Films via Layer-By-Layer Electrostatic Self-Assembly

Electrically conductive films of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid) (PEDOT:PSS) are usually formed by spin coating of aqueous dispersions with PEDOT:PSS nanoparticles. To better understand the film formation, the adsorption conditions are investigated using dip coating and a flow cell with different flow rates. Multilayer films are formed by sequential adsorption of oppositely charged macromolecules or nanoparticles. PEDOT:PSS serves as polyanion, and PDADMA is the polycation. In the dip coating process, the first layer consists of a ≈70 nm thick PEDOT:PSS nanoparticle monolayer. Subsequent PDADMA/PEDOT:PSS bilayers have a constant thickness (9.5 nm). Using the flow cell (0.2 mL/min) for film preparation led to constant PDADMA/PEDOT:PSS bilayer thickness (7.5 nm). PEDOT:PSS nanoparticle monolayers were only observed after PEDOT:PSS adsorption when the washing step was omitted. The electrical conductivity is independent of the number of deposition cycles for both preparation methods. Films prepared by dip coating show low conductivity (26 kS/m) and high surface roughness, whereas films prepared by flow cell show high conductivity (230 kS/m) and low roughness (2-4 nm). We propose that the adsorption in a flow cell leads to a flat orientation of the PEDOT molecules, which increases charge carrier mobility. It is hoped that a better understanding of the relationship between adsorption conditions and carrier mobility will further improve electrical conductivity.

Nanostructured Thin Films Enhancing the Performance of New Organic Electronic Devices: Does It Make Sense?

Electronics have evolved significantly with the development of semiconductor materials and devices, with emerging areas such as organic and flexible electronics showing great promise, particularly in applications such as wearable devices and environmental sensors. Since the discovery of conducting polymers in the late 1970s, organic electronics have paved the way for innovations such as organic field-effect transistors (OFETs), organic light-emitting diodes (OLEDs), and organic solar cells (OPVs). Recent advances have focused on nanostructuring techniques to enhance device properties, such as charge mobility and luminescence efficiency. The growing concern for sustainability has also led to the exploration of biodegradable organic electronics as a potential solution to electronic waste. This perspective briefly discusses the impact of nanostructuring on the performance of both conventional and biodegradable organic devices, exploring the challenges and opportunities associated with using alternative substrates like paper. This perspective emphasizes the importance of understanding molecular organization at the nanoscale to optimize device performance and ensure stability under practical conditions.

PEDOT-based stretchable optoelectronic materials and devices for bioelectronic interfaces

The rapid development of wearable and implantable electronics has enabled the real-time transmission of electrophysiological signals in situ, thus allowing the precise monitoring and regulation of biological functions. Devices based on organic materials tend to have low moduli and intrinsic stretchability, making them ideal choices for the construction of seamless bioelectronic interfaces. In this case, as an organic ionic-electronic conductor, poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) has low impedance to offer a high signal-to-noise ratio for monitoring bioelectrical signals, which has become one of the most promising conductive polymers. However, the initial conductivity and stretchability of pristine PEDOT:PSS are insufficient to meet the application requirements, and there is a trade-off between their improvement. In addition, PEDOT:PSS has poor stability in aqueous environments due to the hygroscopicity of the PSS chains, which severely limits its long-term applications in water-rich bioelectronic interfaces. Considering the growing demands of multi-function integration, the high-resolution fabrication of electronic devices is urgent. It is a great challenge to maintain both electrical and mechanical performance after miniaturization, particularly at feature sizes below 100 μm. In this review, we focus on the combined improvement in the conductivity and stretchability of PEDOT:PSS, as well as the corresponding mechanisms in detail. Also, we summarize the effective strategies to improve the stability of PEDOT:PSS in aqueous environments, which plays a vital role in long-term applications. Finally, we introduce the reliable micropatterning technologies and PEDOT:PSS-based stretchable optoelectronic devices applied at bio-interfaces.

Multi-Channel Microscale Nerve Cuffs for Spatially Selective Neuromodulation

Peripheral nerve modulation via electrical stimulation shows promise for treating several diseases, but current approaches lack selectivity, leading to side effects. Exploring selective neuromodulation with commercially available nerve cuffs is impractical due to their high cost and limited spatial resolution. While custom cuffs reported in the literature achieve high spatial resolutions, they require specialized microfabrication equipment and significant effort to produce even a single design. This inability to rapidly and cost-effectively prototype novel cuff designs impedes research into selective neuromodulation therapies in acute studies. To address this, we developed a reproducible method to easily create multi-channel epineural nerve cuffs for selective fascicular neuromodulation. Leveraging commercial flexible printed circuit (FPC) technology, we created cuffs with high spatial resolution (50 μm) and customizable parameters like electrode size, channel count, and cuff diameter. We designed cuffs to accommodate adult mouse or rat sciatic nerves (300-1500 μm diameter). We coated the electrodes with PEDOT:PSS to improve the charge injection capacity. We demonstrated selective neuromodulation in both rats and mice, achieving preferential activation of the tibialis anterior (TA) and lateral gastrocnemius (LG) muscles. Selectivity was confirmed through micro-computed tomography (μCT) and quantified through a selectivity index. These results demonstrate the potential of this fabrication method for enabling selective neuromodulation studies while significantly reducing production time and costs compared to traditional approaches.

Comparative Study of Electrochromic Supercapacitor Electrodes Based on PEDOT:PSS/ITO Fabricated via Spray and Electrospray Methods

PEDOT

PSS stands out as a leading commercial conducting polymer due to its excellent water dispersibility, controllable miscibility, adjustable conductivity, and ability to form films through various techniques. This study investigates the electrochemical and electrochromic performance of electrodes prepared by depositing PEDOT:PSS onto ITO surfaces by using two distinct methods: conventional spray coating and electrospray deposition. Detailed characterization of the prepared electrodes was performed by using atomic force microscopy, scanning electron microscopy, Fourier-transform infrared, and Raman spectroscopy techniques. Our findings reveal that electrodes fabricated via electrospray deposition (PEDOT:PSS/ITO electrode_2) significantly outperform those made by spray coating (PEDOT:PSS/ITO electrode_1). Specifically, electrode_2 exhibits a capacitance of 1678.60 μF cm-2, compared to 826.14 μF cm-2 for electrode_1, at a current density of 10 μA cm-2.

PEDOT

PSS electrodes exhibit areal energy densities of 0.41 and 0.84 mW h cm-2, along with power densities of 4.96 and 4.97 μW cm-2, respectively. Moreover, electrode_2 demonstrates a high coloration efficiency of 84.32 cm2 C-1 and fast response times of 1.36 s for coloration and 0.98 s for bleaching. This study highlights the advantages of electrospray deposition over traditional methods, showcasing the potential of electrospray-prepared PEDOT:PSS electrodes for use in multifunctional energy storage devices.

Flexible electronics for heavy metal ion detection in water: a comprehensive review

Flexible electronics offer a versatile, rapid, cost-effective and portable solution to monitor water contamination, which poses serious threat to the environment and human health. This review paper presents a comprehensive exploration of the versatile platforms of flexible electronics in the context of heavy metal ion detection in water systems. The review overviews of the fundamental principles of heavy metal ion detection, surveys the state-of-the-art materials and fabrication techniques for flexible sensors, analyses key performance metrics and limitations, and discusses future opportunities and challenges. By highlighting recent advances in nanomaterials, polymers, wireless integration, and sustainability, this review aims to serve as an essential resource for researchers, engineers, and policy makers seeking to address the critical challenge of heavy metal contamination in water resources. The versatile promise of flexible electronics is thoroughly elucidated to inspire continued innovation in this emerging technology arena.

Electromagnetic Interference Shielding Properties of Highly Flexible Poly(styrene-co-butyl acrylate)/PEDOT:PSS Films Fabricated by Latex Technology

As the use of stretchable electronic devices increases, the importance of flexible electromagnetic interference (EMI) shielding films is emerging. In this study, a highly flexible shielding film was fabricated using poly(styrene-co-butyl acrylate) (p(St-co-BA)) latex as a matrix and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as a conductive filler, and then the mechanical properties and EMI shielding performance of the film were examined. Styrene and butyl acrylate were copolymerized to lower the high glass transition temperature and increase the ductility of brittle polystyrene. The latex blending technique was used to produce a shielding film in which the aqueous filler dispersion was uniformly dispersed in the emulsion polymerized resin. To determine the phase change in the copolymer matrix with temperature, the storage modulus was measured, and a time-temperature superposition master curve was constructed. The drying temperature of water-based copolymer resin suitable for film fabrication was set based on this curve. The glass transition temperature and flexibility of the blends were determined by evaluating the thermomechanical analysis and tensile tests. The EMI shielding effectiveness (SE) of the films was analyzed at frequencies from 50 MHz to 1.5 GHz, covering the VHF and UHF ranges. As the filler content increased, the SE of the blend film increased, but the elongation increased until a certain content and then decreased. The optimal content of PEDOT:PSS that satisfied both the ductility and shielding performance of the film was found to be 10 wt%. In this case, the elongation at break reached 300%, and the SE of a 1.6 mm thick film was about 35 dB. The film developed in this study can be used as an EMI shielding material that requires high flexibility.

Thermally Induced Phase Separation of the PEDOT:PSS Layer for Highly Efficient Laminated Polymer Light-Emitting Diodes

Among various conductive polymers, the poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) film has been studied as a promising material for use as a transparent electrode and a hole-injecting layer in organic optoelectronic devices. Due to the increasing demand for the low-cost fabrication of organic light-emitting diodes (OLEDs), PEDOT:PSS has been employed as the top electrode by using the coating or lamination method. Herein, a facile method is reported for the fabrication of highly efficient polymer light-emitting diodes (PLEDs) based on a laminated transparent electrode (LTE) consisting of successive PEDOT:PSS and silver-nanowire (AgNW) layers. In particular, thermally induced phase separation (TIPS) of the PEDOT:PSS film is found to depend on the annealing temperature (Tanneal) during preparation of the LTE. At Tanneal close to the glass transition temperature of the PSS chains, a PSS-rich phase with a large number of PSS- molecules enhances the work function of the PEDOT:PSS on the glass-side surface relative to the air side. By using the optimized LTEs, bidirectional laminated PLEDs are obtained with a total external quantum efficiency of 2.9% and a turn-on voltage of 2.6 V, giving a comparable performance to that of the reference bottom-emitting PLED based on a costly evaporated metal electrode. In addition, an analysis of the angular characteristics, including the variation in the electroluminescence spectra and the change in luminance according to the emission angle, indicates that the laminated PLED with the LTE provides a more uniform angular distribution regardless of the direction of emission. Detailed optical and electrical analyses are also performed to evaluate the suitability of LTEs for the low-cost fabrication of efficient PLEDs.

Spin coated ultrathin PEDOT:PSS/SWCNT film with high electronic conductivity

Conductive Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has been extensively used as non-metallic electrodes. However, the relatively low electrical conductivity of pristine PEDOT:PSS film restricts its further application. Although doping high content conductive filler or increasing the film thickness are effective for enhancing the electrical property, the transparency is sacrificed, which limits the application of PEDOT:PSS films. In this study, preparing PEDOT:PSS composite film with highly conductive and transparent property was the primary purpose. To achieve this goal, single-walled carbon nanotubes (SWCNTs) and dimethyl sulfoxide (DMSO) was chosen to composite with PEDOT:PSS. The spin-coated SWCNT/PEDOT:PSS composite film exhibited excellent electrical conductivity and transparency. The electrical conductivity of composite film with desired transmittance property (78%) reached the highest value (1060.96 S cm-1) at the SWCNTs content was 6 wt%. Under the modification process applied in this work, the non-conductive PSS was partially removed by incorporated DMSO and SWCNTs. Then, the molecular chains of PEDOT stretched and adsorbed onto the surface of SWCNTs, forming a highly efficient three-dimensional conductive structure, which contributed to the enhancement of electrical conductivity and transparency. Additionally, the spin-coating process allowed for the reduction of film thickness, ensuring better transparency. This research contributed to expanding the further applications of PEDOT:PSS films in high-performance transparent film electrodes.

PEDOT:Nafion for Highly Efficient Supercapacitors

Supercapacitors offer notable properties as energy storage devices, providing high power density and fast charging and discharging while maintaining a long cycling lifetime. Although poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate) (PEDOT/PSS) has become a gold standard among organic electronics materials, researchers are still investigating ways to further improve its capacitive characteristics. In this work, we introduced Nafion as an alternative polymeric counterion to PSS to form highly capacitive PEDOT/Nafion; its advantageous supercapacitive properties were further improved by treatment with either dimethyl sulfoxide or ethylene glycol. Accordingly, electrochemical characterization of PEDOT/Nafion films revealed their high areal capacitance (22 mF cm-2 at 10 mV/s) and low charge transfer resistance (∼380 Ω), together with excellent volumetric capacitance (74 F cm-3), Coulombic efficiency (99%), and an energy density of 23.1 ± 1.5 mWh cm-3 at a power density of 0.5 W cm-3, resulting from a more effective ion diffusion inside the conductive film, as confirmed by the results of spectroscopic studies. A proof-of-concept symmetric supercapacitor based on PEDOT/Nafion was characterized with a specific capacitance of approximately 15.7 F g-1 and impressive long-term stability (Coulombic efficiency ∼99% and capacitance ∼98.7% after 1000 charging/discharging cycles), overperforming the device based on PEDOT/PSS.

Advanced Functionalized Materials Based on Layer-by-Layer Assembled Natural Cellulose Nanofiber for Electrodes: A Review

The depletion of fossil fuel resources and its impact on the environment provide a compelling motivation for the development of sustainable energy sources to meet the increasing demand for energy. Accordingly, research and development of energy storage devices have emerged as a critical area of focus. The electrode materials are critical in the electrochemical performance of energy storage devices, such as energy storage capacity and cycle life. Cellulose nanofiber (CNF) represents an important substrate with potentials in the applications of green electrode materials due to their environmental sustainability and excellent compatibility. By utilizing the layer-by layer (LbL) process, well-defined nanoscale multilayer structure is prepared on a variety of substrates. In recent years, increasing attention has focused on electrode materials produced from LbL process on CNFs to yield electrodes with exceptional properties, such as high specific surface area, outstanding electrical conductivity, superior electrochemical activity, and exceptional mechanical stability. This review provides a comprehensive overview on the development of functional CNF via the LbL approach as electrode materials.

Counterion Engineering toward High-Performance and pH-Neutral Polyoxometalates-Based Hole-Transporting Materials for Efficient Organic Optoelectronic Devices

Although protonated polyoxometalates (POMs) are promising hole-transporting layer (HTL) materials for optoelectronic devices owing to their excellent hole collection/injection property, pH neutrality, and noncorrosiveness, POMs are seldom used as high-performance HTL materials. Herein, we designed and synthesized a series of mixed-additive POMs with pH-neutral counterions (NH4+, K+, and Na+) as HTL materials. X-ray photoelectron spectroscopy and single-crystal X-ray analyses indicated that the use of the lacunary heteropolyanion [P2W15O56]12- as an intermediate ensured successful incorporation of the counterions into the mixed-addenda POMs without causing deterioration of the POM frameworks. The hole-transporting layer performance of POM-NH4, which was characterized by a high work function and good conductivity and could be prepared using a low-cost method surpassed those of its protonated counterpart POM-4 and many classic HTL materials. An organic solar cell (OSC) modified with POM-NH4 delivered a power conversion efficiency of 18.0%, which was the highest photovoltaic efficiency achieved by POM-based OSCs to date. Moreover, an HTL material based on POM-NH4 reduced the turn-on voltage of an organic light-emitting diode from 4.2 to 3.2 V. The results of this study suggest that POMs are promising alternatives to the classic HTL materials owing to their excellent hole-collection ability, low costs, neutral nature, and high-chemical stability.

Detection of SARS-CoV-2 Spike Protein Using Micropatterned 3D Poly(3,4-Ethylenedioxythiophene) Nanorods Decorated with Gold Nanoparticles

The sensitivity and fabrication process of the detection platform are important for developing viral disease diagnosis. Recently, the outbreak of SARS-CoV-2 compelled us to develop a new detection platform to control such diseases in the future. We present an electrochemical-based assay that employs the unique properties of gold nanoparticles (AuNPs) deposited on 3D carboxyl-functionalized poly(3,4-ethylenedioxythiophene) (PEDOTAc) nanorods for specific and sensitive detection of SARS-CoV-2 spike protein (S1). The 3D-shaped PEDOTAc nanorods offer an ample surface area for receptor immobilization grown on indium-tin oxide surfaces through transfer-printing technology. Characterization via electrochemical, fluorescence, X-ray photoelectron spectroscopy, and scanning electron microscopy techniques confirmed the structural and morphological properties of the AuNPs-decorated PEDOTAc. In contrast to antibody-based assays, our platform employs ACE2 receptors for spike protein binding. Differential pulse voltammetry records current responses, showing linear sensitivity from 100 ng to 10 pg/mL of S1. In addition, the SARS-CoV-2 assay (CoVPNs) also exhibited excellent selectivity against nonspecific target proteins (H9N2, IL-6, and Escherichia coli). Furthermore, the developed surface maintained good stability for up to 7 consecutive days without losing performance. The results provide new insight into effective 3D conductive nanostructure formation, which is promising in the development of versatile sensory devices.

Recent advances in metal-organic framework (MOF)-based agricultural sensors for metal ions: a review

Metal ions have great significance for agricultural development, food safety, and human health. In turn, there exists an imperative need for the development of novel, sensitive, and reliable sensing techniques for various metal ions. Agricultural sensors for the diagnosis of both agricultural safety and nutritional health can establish quality and safety traceability systems of both agro-products and food to guarantee human health, even life safety. Metal-organic frameworks (MOFs) are utilized widely for the design of diversified sensors due to their distinctive structural characteristics and extraordinary optical and electrical properties. To serve agricultural sensors better, this review is dedicated to providing a brief overview of the synthesis of MOFs, the modification of MOFs, the fabrication of MOF-based film electrodes, the applications of MOF-based agricultural sensors for metal ions, which are centered on electrochemical sensors and optical sensors, and current challenges of MOF-based agricultural sensors. In addition, this review also provides potential future opportunities for the development and practical application of agricultural sensors.

Advancements in tailoring PEDOT: PSS properties for bioelectronic applications: A comprehensive review

In the field of bioelectronics, the demand for biocompatible, stable, and electroactive materials for functional biological interfaces, sensors, and stimulators, is drastically increasing. Conductive polymers (CPs) are synthetic materials, which are gaining increasing interest mainly due to their outstanding electrical, chemical, mechanical, and optical properties. Since its discovery in the late 1980s, the CP Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonic acid) (PEDOT:PSS) has become extremely attractive, being considered as one of the most capable organic electrode materials for several bioelectronic applications in the field of tissue engineering and regenerative medicine. Main examples refer to thin, flexible films, electrodes, hydrogels, scaffolds, and biosensors. Within this context, the authors contend that PEDOT:PSS properties should be customized to encompass: i) biocompatibility, ii) conductivity, iii) stability in wet environment, iv) adhesion to the substrate, and, when necessary, v) (bio-)degradability. However, consolidating all these properties into a single functional solution is not always straightforward. Therefore, the objective of this review paper is to present various methods for acquiring and improving PEDOT:PSS properties, with the primary focus on ensuring its biocompatibility, and simultaneously addressing the other functional features. The last section highlights a collection of designated studies, with a particular emphasis on PEDOT:PSS/carbon filler composites due to their exceptional characteristics.

Conducting Polymer Coatings Prepared by Mixed Emulsions Are Highly Conductive and Stable in Water

An aqueous emulsion of conducting polymer is commonly applied on a substrate to form a coating after drying. The coating, however, disintegrates in water. This paper reports a coating prepared using a mixture of two emulsions: an aqueous emulsion of conducting polymer, and an aqueous emulsion of hydrophobic and rubbery chains copolymerized with silane coupling agents. When applied on a substrate and dried, particles of the mixed emulsion merge into a continuous film. While the conducting polymer forms percolated nanocrystals, the silane groups crosslink the rubbery chains and interlink the rubbery chains to the substrate. The percolated nanocrystals make the coating highly conductive. The covalent network of hydrophobic polymer chains stabilizes the coating in water. The high conductivity and stability in water may enable broad applications.

Oriented Antibody-Assembled Metal-Organic Frameworks for Persistent Wearable Sweat Cortisol Detection

The level of cortisol can reflect people's psychological stress, help diagnose adrenal gland diseases, and is also related to several mental diseases. In this study, we developed a cortisol monoclonal antibody-oriented approach to modify an immunosensor for wearable label-free and persistent sweat cortisol detection. On such an antibody-oriented immunosensor, the fragment crystallizable (Fc) region is partially inserted within the metal-organic framework (MOF), and antibody-binding regions of the cortisol monoclonal antibody (Cmab) were exposed on the MOF surface via selective growth and self-assembly. Such ordered and oriented embedding of antibodies in the MOF resulted in excellent antibody activity and improved stability and antigen-binding capacity. We also engineered the full integrated system for on-body sweat cortisol biosensing performance in several volunteers, and the results indicated that this wearable sensor is suitable for practical cortisol detection with a good linear detection range from 1 pg/mL to 1 μg/mL with a lower limit of detection of 0.26 pg/mL. Moreover, the wearable sensor demonstrated good persistence in detecting cortisol, with only 4.1% decay after 9 days of storage. The present work represents a simple oriented antibody assembling approach to improve the stability of antibodies, providing an important step toward long-term continuous sweat biomarker detection.

Electrospray Deposition of PEDOT:PSS on Carbon Yarn Electrodes for Solid-State Flexible Supercapacitors

The increasing demand for flexible electronic devices has risen due to the high interest in electronic textiles (e-textiles). Consequently, the urge to power e-textiles has sparked enormous interest in flexible energy storage devices. One-dimensional (1D) configuration supercapacitors are the most promising technology for textile applications, but often their production involves complex synthesis techniques and expensive materials. This work unveils the use of the novel electrospray deposition (ESD) technique for the deposition of poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT:PSS). This deposition methodology on conductive carbon yarns creates flexible electrodes with a high surface area. The deposition conditions of PEDOT:PSS were optimized, and their influence on the electrochemical performance of a 1D symmetric supercapacitor with a cellulose-based gel as an electrolyte and a separator was evaluated. The tests herein reported show that these capacitors exhibited a high specific capacitance of 72 mF g^-1, an excellent cyclability of more than 85% capacitance retention after 1500 cycles, and an outstanding capability of bending.

Different Roles between PEDOT:PSS as Counter Electrode and PEDOT:Carrageenan as Electrolyte in Dye-Sensitized Solar Cell Applications: A Systematic Literature Review

Poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) has been mostly used as a counter electrode to give a high performance of dye-sensitized solar cell (DSSC). Recently, PEDOT doped by carrageenan, namely PEDOT:Carrageenan, was introduced as a new material to be applied on DSSC as an electrolyte. PEDOT:Carrageenan has a similar synthesis process as PEDOT:PSS, owing to their similar ester sulphate (-SO₃H) groups in both PSS and carrageenan. This review provides an overview of the different roles between PEDOT:PSS as a counter electrode and PEDOT:Carrageenan as an electrolyte for DSSC applications. The synthesis process and characteristics of PEDOT:PSS and PEDOT:Carrageenan were also described in this review. In conclusion, we found that the primary role of PEDOT:PSS as a counter electrode is to transfer electrons back to cell and accelerate redox reaction with its superior electrical conductivity and high electrocatalytic activity. PEDOT:Carrageenan as an electrolyte has not shown the main role for regenerating the dye sensitized at the oxidized state, probably due to its low ionic conductivity. Therefore, PEDOT:Carrageenan still obtained a low performance of DSSC. Additionally, the future perspective and challenges of using PEDOT:Carrageenan as both electrolyte and counter electrode are described in detail.

Hofmeister Series for Conducting Polymers: The Road to Better Electrochemical Activity?

Poly-3,4-ethylenedioxythiophene:polystyrene sulfonate (PEDOT:PSS) is a widely used conducting polymer with versatile applications in organic electronics. The addition of various salts during the preparation of PEDOT:PSS films can significantly influence their electrochemical properties. In this study, we systematically investigated the effects of different salt additives on the electrochemical properties, morphology, and structure of PEDOT:PSS films using a variety of experimental techniques, including cyclic voltammetry, electrochemical impedance spectroscopy, operando conductance measurements and in situ UV-VIS spectroelectrochemistry. Our results showed that the electrochemical properties of the films are closely related to the nature of the additives used and allowed us to establish a probable relationship with the Hofmeister series. The correlation coefficients obtained for the capacitance and Hofmeister series descriptors indicate a strong relationship between the salt additives and the electrochemical activity of PEDOT:PSS films. The work allows us to better understand the processes occurring within PEDOT:PSS films during modification with different salts. It also demonstrates the potential for fine-tuning the properties of PEDOT:PSS films by selecting appropriate salt additives. Our findings can contribute to the development of more efficient and tailored PEDOT:PSS-based devices for a wide range of applications, including supercapacitors, batteries, electrochemical transistors, and sensors.

Micro/Nano-Fabrication of Flexible Poly(3,4-Ethylenedioxythiophene)-Based Conductive Films for High-Performance Microdevices

With the increasing demands for novel flexible organic electronic devices, conductive polymers are now becoming the rising star for reaching such targets, which has witnessed significant breakthroughs in the fields of thermoelectric devices, solar cells, sensors, and hydrogels during the past decade due to their outstanding conductivity, solution-processing ability, as well as tailorability. However, the commercialization of those devices still lags markedly behind the corresponding research advances, arising from the not high enough performance and limited manufacturing techniques. The conductivity and micro/nano-structure of conductive polymer films are two critical factors for achieving high-performance microdevices. In this review, the state-of-the-art technologies for developing organic devices by using conductive polymers are comprehensively summarized, which will begin with a description of the commonly used synthesis methods and mechanisms for conductive polymers. Next, the current techniques for the fabrication of conductive polymer films will be proffered and discussed. Subsequently, approaches for tailoring the nanostructures and microstructures of conductive polymer films are summarized and discussed. Then, the applications of micro/nano-fabricated conductive films-based devices in various fields are given and the role of the micro/nano-structures on the device performances is highlighted. Finally, the perspectives on future directions in this exciting field are presented.

Light-Responsive Conductive Surface Coatings on the Basis of Azidomethyl-PEDOT Electropolymer Films

The design of responsive coatings has gained increasing attention recently, with light-responsive interfaces receiving particular appreciation, as their surface properties can be modulated with excellent spatiotemporal control. In this article, we present light-responsive conductive coatings acquired through a copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction between electropolymerized azide-functionalized poly(3,4-ethylenedioxythiophene) (PEDOT-N₃) and arylazopyrazole (AAP)-bearing alkynes. The UV/vis and X-ray photoelectron spectroscopy (XPS) data indicate a successful post-modification, supporting a covalent attachment of AAP moieties to PEDOT-N₃. The thickness and degree of PEDOT-N₃ modification are accessible by varying the amount of passed charge during electropolymerization and time of reaction, respectively, providing a degree of synthetic control over the physicochemical material properties. The produced substrates demonstrate a reversible and stable light-driven switching of photochromic properties in both "dry" and swelled states, as well as efficient electrocatalytic Z → E switching. The AAP-modified polymer substrates exhibit a light-controlled wetting behavior, demonstrating a consistently reversible switching of the static water contact angle with a difference up to 10.0° for CF₃-AAP@PEDOT-N₃. The results highlight the application of conducting PEDOT-N₃ for the covalent immobilization of molecular switches while preserving their stimuli-responsive features.

Conductive bacterial cellulose: From drug delivery to flexible electronics

Bacterial cellulose (BC) is a chemically pure, non-toxic, and non-pyrogenic natural polymer with high mechanical strength and a complex fibrillar porous structure. Due to these unique biological and physical properties, BC has been amply used in the food industry and, to a somewhat lesser extent, in medicine and cosmetology. To expand its application the BC structure can be modified. This review presented some recent developments in electrically conductive BC-based composites. The as-synthesized BC is an excellent dielectric. Conductive polymers, graphene oxide, nanoparticles and other materials are used to provide it with conductive properties. Conductive bacterial cellulose (CBC) is currently investigated in numerous areas including electrically conductive scaffolds for tissue regeneration, implantable and wearable biointerfaces, flexible batteries, sensors, EMI shielding composites. However, there are several issues to be addressed before CBC composites can enter the market, namely, composite mechanical strength reduction, porosity decrease, change in chemical characteristics. Some of them can be addressed both at the stage of synthesis, biologically, or by adding (nano)materials with the required properties to the BC structure. We propose several solutions to meet the challenges and suggest some promising BC applications.

Tailoring inkjet-printed PEDOT:PSS composition toward green, wearable device fabrication

Inkjet printing remains one of the most cost-efficient techniques for device prototyping and manufacturing, offering considerable freedom of digital design, non-contact, and additive fabrication. When developing novel wearable devices, a balanced approach is required between functional, user-safe materials and scalable manufacturing processes. Here, we propose a tailor-made ink formulation, based on non-hazardous materials, to develop green electronic devices aimed at interfacing with humans. We demonstrate that developed ink exhibits high-resolution inkjet printability, in line with theoretical prediction, on multiple wearable substrates. The ink's chemical composition ensures the pattern's enhanced electrical properties, mechanical flexibility, and stability in water. The cytocompatibility evaluations show no noxious effects from printed films in contact with human mesenchymal stem cells. Finally, we fabricated a printed wearable touch sensor on a non-woven fabric substrate, capable of tracking human steps. This is a step toward the development of green wearable electronics manufacturing, demonstrating a viable combination of materials and processes for biocompatible devices.

Gradual Morphological Change in PEDOT:PSS Thin Films Immersed in an Aqueous Solution

The poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) film is a promising material for electrodes, biomolecular sensor channels, and probes for physiological signals because the electrical conduction of PEDOT:PSS is tuned simply through the electrochemical reaction with the target analyte. However, forming a specific morphology or nanostructure on PEDOT:PSS thin films immersed in an aqueous solution is still a challenge. Herein, we report the mechanism for the stepwise morphological change in the highly conductive PEDOT:PSS layer that successfully explains the electrical and structural modulations that occur after a soaking test in various pH conditions. The change in PEDOT:PSS begins with the rapid swelling and dissolution of PSS-rich domains and the simultaneous structural rearrangement of the remaining PEDOT chains within 1 s of dipping. Analysis confirms that the pH conditions of an aqueous solution govern the oxidation state and the form of the PEDOT chains. After removing the water molecules, additional PEDOT-rich grains were generated and accumulated on the surface of the film, which exhibited hydrophobic barrier characteristics. With the help of this intrinsic barrier on the PEDOT:PSS surface, the sheet resistance slightly increased from 72 to 144 Ω/sq even after dipping in a water bath for 350 h. We also demonstrate the usability of the proposed approach on a sensor to detect vitamin C in an aqueous medium. Utilizing the electrochemical reaction of PEDOT:PSS films, the simple resistor sensor showed a response time of less than 150 s, which is 10 times faster than that observed in a previous report. The soaked samples also showed a more reliable linear correlation between the current change and the amount of ascorbic acid compared with pristine PEDOT:PSS. Both the proposed mechanism and the role of accumulated PEDOT-rich regions illustrate the versatile potential of highly conductive PEDOT:PSS films in the field of bioelectronic applications, owing to the increased design architecture.

Enhanced electrical conductivity and stretchability of ionic-liquid PEDOT:PSS air-cathodes for aluminium-air batteries with long lifetime and high specific energy

A hydrogel film, poly-3,4-ethylenedioxythiophene (PEDOT):polystyrenesulfonate (PSS), containing an ionic liquid, is used as an air-cathode for a metal-air battery and its performance is investigated. This work presents the development of the air-cathode and the characterization of its physical, chemical and mechanical properties. Moreover, in view of wearable batteries, these air-cathodes are implemented within a flexible aluminium-air battery. It contains an aluminium anode, an electrolyte made of cellulose paper imbibed with an aqueous sodium chloride solution and the PEDOT:PSS air-cathode. Characterisation tests showed that the ionic liquid did not change the air-cathode chemically, while the electric conductivity increased considerably. The anode has an acceptable purity and was found to be resistant against self-corrosion. Discharge tests showed operating voltages up to 0.65 V, whereas two batteries in series could deliver up to 1.3 V at a current density of 0.9 mA cm^-2 for almost a day, sufficient for monitoring and medical devices. Several discharge tests with current densities from 0.25 up to 2.5 mA cm^-2 have presented operating lifetimes from 10 h up until over a day. At a current density of 2.8 mA cm^-2, the operating voltage and lifetime dropped considerably, explained by approaching the limiting current density of about 3 mA cm^-2, as evidenced by linear sweep voltammetry. The batteries showed high specific energies up to about 3140 Wh kg^-1. Mechanical tests revealed a sufficient stretchability of the air-cathode, even after battery discharge, implying an acceptable degree of wearability. Together with the reusability of the air-cathode, the battery is a promising route towards a low-cost viable way for wearable power supply for monitoring medical devices with long lifetimes and high specific energies. Optimization of the air-cathode could even lead to higher power applications.

Effect of Oxidants on Properties of Electroactive Ultrathin Polyazulene Films Synthesized by Vapor Phase Polymerization at Atmospheric Pressure

A non-benzenoid aromatic hydrocarbon azulene, naturally found in plants and mushrooms, is known for its derivatives applications in medicines. However, the processability of its chemically synthesized high-capacitance polymer is constrained by the sparingly soluble nature of its polymeric form. Oxidative chemical synthesis on a desirable substrate overcomes this difficulty. In this report, polyazulene (PAz) thin films are synthesized by vapor phase polymerization at atmospheric pressure using oxidants, such as CuCl₂, CuBr₂, FeCl₃, and FeTOS. The effect of oxidants on morphologies of PAz films is studied using atomic force microscopy and microscope imaging. Each oxidant produced distinct microstructures in the films. The films synthesized using Cu(II) salts showed organized and knitted structures, whereas Fe(III) salts formed casted sheet-like disordered arrangements. The films synthesized using CuCl₂ created uniform porous film assemblies. The pre-peak formations and their splitting observed in the cyclic voltammograms revealed phase segregations in the films. Oxidant-dependent structural and chemical differences such as charge carrier formation, doping levels, and polymer chain length in the PAz films are studied by using UV-Vis and FTIR spectroscopy. The results indicated that 240 and 180 mM are the optimum concentration of CuCl₂ to produce high capacitance and well-organized single- and triple-layered PAz films, respectively.

Recent Advances in Graphene-Based Nanocomposites for Ammonia Detection

The increasing demand to mitigate the alarming effects of the emission of ammonia (NH3) on human health and the environment has highlighted the growing attention to the design of reliable and effective sensing technologies using novel materials and unique nanocomposites with tunable functionalities. Among the state-of-the-art ammonia detection materials, graphene-based polymeric nanocomposites have gained significant attention. Despite the ever-increasing number of publications on graphene-based polymeric nanocomposites for ammonia detection, various understandings and information regarding the process, mechanisms, and new material components have not been fully explored. Therefore, this review summarises the recent progress of graphene-based polymeric nanocomposites for ammonia detection. A comprehensive discussion is provided on the various gas sensor designs, including chemiresistive, Quartz Crystal Microbalance (QCM), and Field-Effect Transistor (FET), as well as gas sensors utilising the graphene-based polymer nanocomposites, in addition to highlighting the pros and cons of graphene to enhance the performance of gas sensors. Moreover, the various techniques used to fabricate graphene-based nanocomposites and the numerous polymer electrolytes (e.g., conductive polymeric electrolytes), the ion transport models, and the fabrication and detection mechanisms of ammonia are critically addressed. Finally, a brief outlook on the significant progress, future opportunities, and challenges of graphene-based polymer nanocomposites for the application of ammonia detection are presented.

Nanofiber Based on Electrically Conductive Materials for Biosensor Applications

Biosensors are analytical tools that enable the transmission of different signals produced from the target analyte to a transducer for the production of real-time clinical diagnostic devices by obtaining meaningful results. Recent research demonstrates that the production of structured nanofiber through various methods has come to light as a potential platform for enhancing the functionality of biosensing devices. The general trend is towards the use of nanofibers for electrochemical biosensors. However, optical and mechanical biosensors are being developed by functionalization of nanofibers. Such nanofibers exhibit a high surface area to volume ratio, surface porosity, electroconductivity and variable morphology. In addition, nanosized structures have shown to be effective as membranes for immobilizing bioanalytes, offering physiologically active molecules a favorable microenvironment that improves the efficiency of biosensing. Cost effective, wearable biosensors are crucial for point of care diagnostics. This review aims to examine the electrically conductive materials, potential forming methods, and wide-ranging applications of nanofiber-based biosensing platforms, with an emphasis on transducers incorporating mechanical, electrochemical and optical and bioreceptors involving cancer biomarker, urea, DNA, microorganisms, primarily in the last decade. The appealing properties of nanofibers mats and the attributes of the biorecognition components are also stated and explored. Finally, consideration is given to the difficulties now affecting the design of nanofiber-based biosensing platforms as well as their future potential.

Gd(III) metal-organic framework as an effective humidity sensor and its hydrogen adsorption properties

Metal-organic frameworks (MOFs) represent a class of nanoporous materials built up by metal ions and organic linkers with several interesting potential applications. The present study described the synthesis and characterization of Gd(III)-based MOF with the chemical composition [Gd(BTC)(H₂O)]·DMF (BTC - trimesate, DMF = N,N'-dimethylformamide), known as MOF-76(Gd) for hydrogen adsorption/desorption capacity and humidity sensing applications. The structure and morphology of as-synthesized material were studied using powder X-ray diffraction, scanning and transmission electron microscopy. The crystal structure of MOF-76(Gd) consists of gadolinium (III) and benzene-1,3,5-tricarboxylate ions, one coordinated aqua ligand and one crystallization DMF molecule. The polymeric framework of MOF-76(Gd) contains 1D sinusoidally shaped channels with sizes of 6.7 × 6.7 Å propagating along c crystallographic axis. The thermogravimetric analysis, heating infrared spectroscopy and in-situ heating powder X-ray diffraction experiments of the prepared framework exhibited thermal stability up to 550 °C. Nitrogen adsorption/desorption measurement at -196 °C showed a BET surface area of 605 m² g^-1 and pore volume of 0.24 cm³ g^-1. The maximal hydrogen storage capacity of MOF-76(Gd) was 1.66 wt % and 1.34 wt % -196 °C and -186 °C and pressure up to 1 bar, respectively. Finally, the humidity sensing measurements (water adsorption experiments) were performed, and the results indicate that MOF-76(Gd) is a suitable material for moisture sensing application with a fast response (11 s) and recovery time (2 s) in the relative humidity range of 11-98%.

Conformally Adhesive, Large-Area, Solidlike, yet Transient Liquid Metal Thin Films and Patterns via Gelatin-Regulated Droplet Deposition and Sintering

Adhesion and spreading of liquid metals (LMs) on substrates are essential steps for the generation of flexible electronics and thermal management devices. However, the controlled deposition is limited by the high surface tension and peculiar wetting and adhesion behavior of LMs. Herein, we introduce gelatin-regulated LM droplet deposition and sintering (GLMDDS), for the upscalable production of conformally adhesive, solidlike, yet transient LM thin films and patterns on diverse substrates. This method involves four steps: homogeneous deposition of LM microdroplets, gelation of the LM-gelatin solution, toughening of the gelatin hydrogel by solvent displacement, and peeling-induced sintering of LM microdroplets. The LM thin film exhibits a three-layer structure, comprising an LM microdroplet-embedded tough organohydrogel adhesion layer, a continuous LM layer, and an oxide skin. The composite exhibits high stretchability and mechanical robustness, conformal adhesion to various substrates, high conductivity (4.35 × 10⁵ S·m^-1), and transience (86% LM recycled). Large-scale deposition (i.e., 5.6 dm²) and the potential for patterns on diverse substrates demonstrate its upscalability and broad suitability. Finally, the LM thin films and patterns are applied for flexible and wearable devices, i.e., pressure sensors, heaters, human motion tracking devices, and thermal management devices, illustrating the broad applicability of this strategy.

Recent Developments and Implementations of Conductive Polymer-Based Flexible Devices in Sensing Applications

Flexible sensing devices have attracted significant attention for various applications, such as medical devices, environmental monitoring, and healthcare. Numerous materials have been used to fabricate flexible sensing devices and improve their sensing performance in terms of their electrical and mechanical properties. Among the studied materials, conductive polymers are promising candidates for next-generation flexible, stretchable, and wearable electronic devices because of their outstanding characteristics, such as flexibility, light weight, and non-toxicity. Understanding the interesting properties of conductive polymers and the solution-based deposition processes and patterning technologies used for conductive polymer device fabrication is necessary to develop appropriate and highly effective flexible sensors. The present review provides scientific evidence for promising strategies for fabricating conductive polymer-based flexible sensors. Specifically, the outstanding nature of the structures, conductivity, and synthesis methods of some of the main conductive polymers are discussed. Furthermore, conventional and innovative technologies for preparing conductive polymer thin films in flexible sensors are identified and evaluated, as are the potential applications of these sensors in environmental and human health monitoring.

Electron-Rich EDOT Linkers in Tetracationic bis-Triarylborane Chromophores: Influence on Water Stability, Biomacromolecule Sensing, and Photoinduced Cytotoxicity

Three novel tetracationic bis-triarylboranes with 3,4-ethylenedioxythiophene (EDOT) linkers, and their neutral precursors, showed significant red-shifted absorption and emission compared to their thiophene-containing analogues, with one of the EDOT-derivatives emitting in the NIR region. Only the EDOT-linked trixylylborane tetracation was stable in aqueous solution, indicating that direct attachment of a thiophene or even 3-methylthiophene to the boron atom is insufficient to provide hydrolytic stability in aqueous solution. Further comparative analysis of the EDOT-linked trixylylborane tetracation and its bis-thiophene analogue revealed efficient photo-induced singlet oxygen production, with the consequent biological implications. Thus, both analogues bind strongly to ds-DNA and BSA, very efficiently enter living human cells, accumulate in several different cytoplasmic organelles with no toxic effect but, under intense visible light irradiation, they exhibit almost instantaneous and very strong cytotoxic effects, presumably attributed to singlet oxygen production. Thus, both compounds are intriguing theranostic agents, whose intracellular and probably intra-tissue location can be monitored by strong fluorescence, allowing switching on of the strong bioactivity by well-focused visible light.

Micropatterned Poly(3,4-ethylenedioxythiophene) Thin Films with Improved Color-Switching Rates and Coloration Efficiency

Electrochromic materials carry out redox reactions and change their colors upon external bias. These materials are the primary component in constructing smart windows for energy saving in buildings or vehicles. Enhancing the electrochromic performances of the materials is crucial for their practical applications. Micropatterned poly(3,4-ethylenedioxythiophene) (mPEDOT) thin films are electrodeposited on indium tin oxide conducting glass in this study. Their electrochromic properties, including transmittance modulation ability, color-switching rates, and coloration efficiency, are investigated and compared with nonpatterned PEDOT thin films. The mPEDOT thin films exhibited faster coloring and bleaching speeds and higher coloration efficiency than the PEDOT thin films while keeping similar transmittance modulation ability. The results suggest that micropatterning an electrochromic material thin film might enhance its electrochromic performances. This research demonstrates the possibility of promoting the color-switching rate of a PEDOT thin film by micropatterning it.

Printable inks and deformable electronic array devices

Deformable printed electronic array devices are expected to revolutionize next-generation electronics. However, although remarkable technological advances in printable inks and deformable electronic array devices have recently been achieved, technical challenges remain to commercialize these technologies. In this review article a brief introduction to printing methods highlighting significant research studies on ink formation for conductors, semiconductors, and insulators is provided, and the structural design and successful printing strategies of deformable electronic array devices are described. Successful device demonstrations are presented in the applications of passive- and active-matrix array devices. Finally, perspectives and technological challenges to be achieved are pointed out to print practically available deformable devices.

Overview of the Influence of Silver, Gold, and Titanium Nanoparticles on the Physical Properties of PEDOT:PSS-Coated Cotton Fabrics

Metallic nanoparticles have been of interest to scientists, and they are now widely used in biomedical and engineering applications. The importance, categorization, and characterization of silver nanoparticles, gold nanoparticles, and titanium nanoparticles have been discussed. Poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) is the most practical and reliable conductive polymer used in the manufacturing of conductive textiles. The effects of metallic nanoparticles on the performance of PEDOT:PSS thin films are discussed. The results indicated that the properties of PEDOT:PSS significantly depended on the synthesis technique, doping, post-treatment, and composite material. Further, electronic textiles known as smart textiles have recently gained popularity, and they offer a wide range of applications. This review provides an overview of the effects of nanoparticles on the physical properties of PEDOT:PSS-coated cotton fabrics.

Water Washable and Flexible Light-Emitting Fibers Based on Electrochemiluminescent Gels

Herein, a new concept of device architecture to fabricate fibrous light-emitting devices is demonstrated based on an electrochemiluminescence (ECL) material for an electronic textile system. A unique feature of this work is that instead of conventional semiconductor materials, such as organics, perovskites, and quantum dots for fibrous light emitting devices, a solid-state ECL electrolyte gel is employed as a light-emitting layer. The solid-state ECL gel is prepared from a precursor solution composed of matrix polymer, ionic liquid, and ECL luminophore. From this, we successfully realize light-emitting fibers through a simple and cost-effective single-step dip-coating method in ambient air, without complicated multistep vacuum processes. The resulting fiber devices reliably operated under applied AC bias of ±2.5 V and showed luminance of 47 cd m^-2. More importantly, the light-emitting fibers exhibited outstanding water resistance without any passivation layers, owing to the water immiscible and hydrophobic nature of the ECL gel. In addition, because of their simple structure, the fiber devices can be easily deformed and woven together with commercial knitwear by hand. Therefore, these results suggest a promising strategy for the development of practical fiber displays and contribute to progress in electronic textile technology.

Method Matters: Exploring Alkoxysulfonate-Functionalized Poly(3,4-ethylenedioxythiophene) and Its Unintentional Self-Aggregating Copolymer toward Injectable Bioelectronics

Injectable bioelectronics could become an alternative or a complement to traditional drug treatments. To this end, a new self-doped p-type conducting PEDOT-S copolymer (A5) was synthesized. This copolymer formed highly water-dispersed nanoparticles and aggregated into a mixed ion-electron conducting hydrogel when injected into a tissue model. First, we synthetically repeated most of the published methods for PEDOT-S at the lab scale. Surprisingly, analysis using high-resolution matrix-assisted laser desorption ionization-mass spectroscopy showed that almost all the methods generated PEDOT-S derivatives with the same polymer lengths (i.e., oligomers, seven to eight monomers in average); thus, the polymer length cannot account for the differences in the conductivities reported earlier. The main difference, however, was that some methods generated an unintentional copolymer P(EDOT-S/EDOT-OH) that is more prone to aggregate and display higher conductivities in general than the PEDOT-S homopolymer. Based on this, we synthesized the PEDOT-S derivative A5, that displayed the highest film conductivity (33 S cm^-1) among all PEDOT-S derivatives synthesized. Injecting A5 nanoparticles into the agarose gel cast with a physiological buffer generated a stable and highly conductive hydrogel (1-5 S cm^-1), where no conductive structures were seen in agarose with the other PEDOT-S derivatives. Furthermore, the ion-treated A5 hydrogel remained stable and maintained initial conductivities for 7 months (the longest period tested) in pure water, and A5 mixed with Fe₃O₄ nanoparticles generated a magnetoconductive relay device in water. Thus, we have successfully synthesized a water-processable, syringe-injectable, and self-doped PEDOT-S polymer capable of forming a conductive hydrogel in tissue mimics, thereby paving a way for future applications within in vivo electronics.

PEDOT-AuNPs-based impedimetric immunosensor for the detection of SARS-CoV-2 antibodies

Electrochemical sensors and biosensors are useful techniques for fast, inexpensive, sensitive, and easy detection of innumerous specimen. In face of COVID-19 pandemic, it became evident the necessity of a rapid and accurate diagnostic test, so the impedimetric immunosensor approach can be a good alternative to replace the conventional tests due to the specific antibody-antigen binding interaction and the fast response in comparison to traditional methods. In this work, a modified electrode with electrosynthesized PEDOT and gold nanoparticles followed by the immobilization of truncated nucleoprotein (N aa160-406aa) was used for a fast and reliable detection of antibodies against COVID-19 in human serum sample. The method consists in analyzing the charge-transfer resistance (R_CT) variation before and after the modified electrode comes into contact with the positive and negative serum sample for COVID-19, using [Fe(CN)₆]^3-/4- as a probe. The results show a linear and selective response for serum samples diluted in a range of 2.5 × 10³ to 20 × 10³. Also, the electrode material was fully characterized by Raman spectroscopy, transmission electron microscopy and scanning electron microscopy coupled with EDS, indicating that the gold nanoparticles were well distributed around the polymer matrix and the presence of the biological sample was confirmed by EDS analysis. EIS measurements allowed to differentiate the negative and positive samples by the difference in the R_CT magnitude, proving that the material developed here has potential properties to be applied in impedimetric immunosensors for the detection of SARS-CoV-2 antibodies in about 30 min.

Improving the Conductivity of the PEDOT:PSS Layers in Photovoltaic Cells Based on Organometallic Halide Perovskites

Among conductive polymers, PEDOT films find the widest application in electronics. For photovoltaic applications, studies of their optical properties, stability, and electrical conductivity are of greatest interest. However, the PEDOT:PSS transport layers, when used in photovoltaic cells, have a high electrical resistance, which prevents solar cells from increasing their efficiency. One of the promising ways to improve their electrical properties is the use of composite materials based on them, in which the conductivity can be increased by introducing various additives. In this work, conductive polymer films PEDOT:PSS (poly (3,4-ethylenedioxythiophene):polystyrene sulfonate acid) doped with a number of amines (Pentylamine, Octylamine, Diethylamine, Aniline with carbon nanotubes) were obtained and studied. It is shown that, depending on the concentration of dopants, the electrical conductivity of PEDOT:PSS films can be significantly improved. In this case, the light transmission of the films practically does not change. The process of improving the conductivity by treating the surface of the finished film with amines, followed by heat treatment, was studied. It is assumed that the improvement in conductivity is the result of the self-assembly of monolayers of organic molecules on the surface of the PEDOT:PSS film leading to its p-doping due to intermolecular interaction.