Liquid chromatography/multi-stage mass spectrometry of bisphenol A and its halogenated derivatives

Teaching mass spectrometry: A compilation of approaches to teaching theory and practice of mass spectrometry

The areas of mass spectrometry applications seem to be much larger than those of any other analytical techniques. They extend from the determination of molecular mass in organic chemistry, through the analytical applications in forensic, environmental and omics sciences, the application in extra-terrestrial exploration and many others. Mass spectrometry, usually coupled with chromatographic techniques, has also found wide application in the pharmaceutical industry, forensic laboratories, laboratories of sanitary inspection or environmental inspection, etc. The growing areas of applications give rise to the demand for the comprehensive mass spectrometry education of undergraduates. This overview covers the body of literature describing various interesting ideas that can be successfully used for teaching mass spectrometry. Since mass spectrometry is a multidisciplinary field, old but dynamically developing, teaching mass spectrometry may be more problematic in comparison to teaching other analytical techniques, for example, there is the problem of position of mass spectrometry in the chemistry curriculum. On the other hand, it is obvious that the mass spectrometry community, besides difficult scientific work, does great and admirable teaching work, in order to perfectly educate undergraduates in the field of mass spectrometry and to make learning mass spectrometry as attractive as possible.

Multiphase Ozonolysis of Bisphenol A: Chemical Transformations on Surfaces in the Environment

High global plastic production volumes have led to the widespread presence of bisphenol compounds in human living and working environments. The most common bisphenol, bisphenol A (BPA), despite being endocrine disruptive and estrogenic, is still not fully banned worldwide, leading to continued human exposure via particles in air, dust, and surfaces in both outdoor and indoor environments. While its abundance is well documented, few studies have addressed the chemical transformations of BPA, the properties of its reactive products, and their toxicity. Here, the first gas-surface multiphase ozonolysis experiment of BPA thin films, at a constant ozone mixing ratio of 100 ppb, was performed in a flow tube for periods up to 24 h. Three transformation products involving the addition of 1, 2, and 3 oxygen atoms to the molecule were identified by LC-ESI-HRMS analyses. Exposure of indoor air to thin BPA surface films and BPA-containing thermal paper over periods of days validated the flow tube experiments, demonstrating the rapid nature of this multiphase ozonolysis reaction at atmospherically relevant ozone levels. Multiple transformation pathways are proposed that are likely applicable to not only BPA but also emerging commercial bisphenol products.

Review of the environmental occurrence, analytical techniques, degradation and toxicity of TBBPA and its derivatives

BFRs (brominated flame retardants) are a class of compounds that are added to or applied to polymeric materials to avoid or reduce the spread of fire. Tetrabromobisphenol A (TBBPA) is one of the known BFR used many in industries today. Due to its wide application as an additive flame retardant in commodities, TBBPA has become a common indoor contaminant. Recent researches have raised concerns about the possible hazardous effect of exposure to TBBPA and its derivatives in humans and wildlife. This review gives a thorough assessment of the literature on TBBPA and its derivatives, as well as environmental levels and human exposure. Several analytical techniques/methods have been developed for sensitive and accurate analysis of TBBPA and its derivatives in different compartments. These chemicals have been detected in practically every environmental compartment globally, making them a ubiquitous pollutant. TBBPA may be subject to adsorption, biological degradation or photolysis, photolysis after being released into the environment. Treatment of TBBPA-containing waste, as well as manufacturing and usage regulations, can limit the release of these chemicals to the environment and the health hazards associated with its exposure. Several methods have been successfully employed for the treatment of TBBPA including but not limited to adsorption, ozonation, oxidation and anaerobic degradation. Previous studies have shown that TBBPA and its derivative cause a lot of toxic effects. Diet and dust ingestion and have been identified as the main routes of TBBPA exposure in the general population, according to human exposure studies. Toddlers are more vulnerable than adults to be exposed to indoor dust through inadvertent ingestion. Furthermore, TBBP-A exposure can occur during pregnancy and through breast milk. This review will go a long way in closing up the knowledge gap on the silent and over ignored deadly effects of TBBPA and its derivatives and their attendant consequences.

Determination and occurrence of bisphenol A and thirteen structural analogs in soil

Bisphenol A is a phenolic plasticizer used in the production of various plastic products. Its endocrine-disrupting effects on ecological and human health lead to replacement with its structural analogs. The occurrence of these analogs in the soil environment, which is an important sink for bisphenols, has been rarely reported. In this study, a robust method was developed to determine bisphenol A and 13 analogs in soil using accelerated solvent extraction combined with in-line purification for fast and efficient extraction and ultra-performance liquid chromatography-tandem mass spectrometry for simultaneous and accurate quantification. The method detection limits of 14 bisphenols were between 0.01 and 0.39 ng g^-1, and the recoveries were in the range of 80%-120%. The developed method was applied to 29 agricultural and urban soil samples from 21 provinces in China, and 12 bisphenols were detected. Among them, the contents of bisphenol A, F, and P were up to 166.0, 212.9, and 78.2 ng g^-1 dry weight, respectively. The maximum concentration of bisphenol P was at least ten times higher than literature values in food and other environmental matrices. The results of this study showed that "hot spots" existed for bisphenol pollution in soil and that further investigations were necessary to avoid regrettable substitutions.

Comprehensive supramolecular solvent-based sample treatment platform for evaluation of combined exposure to mixtures of bisphenols and derivatives by liquid chromatography-tandem mass spectrometry

The growing demand for a better understanding of the effects of chemical mixtures on human health has fostered the need for extensive estimation of uptake rates from identified sources and/or biomonitoring, which has encouraged the development of analyte- and matrix-independent analytical methods. In this paper, we report a comprehensive sample treatment platform for the efficient extraction and interference removal in the determination of twenty-one bisphenols and derivatives (log K_ow from 1.254 to 6.564) in a variety of human exposure sources and biological fluids. Treatment of both liquid (canned beverages, urine and serum) and solid (canned food, dust) samples was based on the use of low volumes (190-200 μL) of a hexanol-based supramolecular solvent having properties of restricted access materials. The efficient extraction of bisphenol and derivatives (absolute recoveries 70-114%) was due to the mixed-mode mechanisms (hydrogen bonding, polar and dispersion interactions) and the huge number of binding sites offered by the supramolecular solvent with properties of restricted access materials for solute solubilization. Signal suppression or enhancement (SSE) values kept in the range 78-116% for samples encompassing a wide range of macromolecules content (e.g. protein, fat, carbohydrates, etc.). Quantification was carried out by liquid chromatography, electrospray tandem mass spectrometry using external calibration. Method quantitation limits for bisphenols in liquid and solid samples were in the interval 0.019-0.19 μg L^-1 and 0.06-0.81 μg kg^-1. The method was applied to the determination of bisphenols and derivatives in thirteen human exposure sources and biological fluids. Only four bisphenols out of twenty-one were not found in the analyzed samples. This supramolecular solvent-based bisphenol- and matrix-independent method constitutes a valuable strategy in terms of analytical and operational characteristics for the assessment of human exposure to mixtures of bisphenols and derivatives.

Comparison of DAD and FLD Detection for Identification of Selected Bisphenols in Human Breast Milk Samples and Their Quantitative Analysis by LC-MS/MS

BACKGROUND

Determination of bisphenols released from packaging material is undoubtedly a difficult and tricky task, requiring the chemical analyst to develop an individual approach to obtain reliable analytical information.

OBJECTIVE

QuECHERS (Quick, Easy, Cheap, Effective, Rugged, and Safe)/dispersive solid-phase extraction (d-SPE) technique and high performance liquid chromatography (HPLC) coupled with modern detection techniques such as diode-array detector (DAD), fluorescence detector (FLD) or tandem mass spectrometry (MS/MS) for the determination of bisphenols such as bisphenol A (BPA), bisphenol S (BPS), bisphenol F (BPF), bisphenol B (BPB), 2-[[4-[2-[4-(Oxiran-2-ylmethoxy)phenyl]propan-2yl]phenoxy] methyl]oxirane (BADGE), 3-[4-[2-[4-(Oxiran-2-ylmethoxy)phenyl]propan-2-yl]phenoxy]propane-1,2-diol (BADGE*H2O), 3-[4-[2-[4-(2,3-Dihydroxypropoxy)phenyl]propan-2-yl]phenoxy]propane-1,2-diol (BADGE*2H2O), 1-Chloro-3-[4-[2-[4-(3-chloro-2-hydroxypropoxy)phenyl] propan-2-yl]phenoxy]propan-2-ol (BADGE*2HCl) in human breast milk samples have been performed.

METHODS

For the analysis of total analytes, prior to the extraction with acetonitrile, a deconjugation step was implemented in a tube by adding 1 mL of the enzymatic solution with the β-Glucuronidase to 5 mL of sample. The mix was homogenized and incubated for 17 h at 37°C. Ten milliliters of acetonitrile, and a QuEChERS salt packet with 4 g anhydrous MgSO4 and 1 g NaCl were added. During the d-SPE step the extract was transferred into tube with 30 mg Z-Sep and 50 mg PSA (and also 150 mg MgSO4 for LC-MS/MS analysis). MeOH-water (20:80, v/v) were added to the dry residue and the extract was reconstituted in 150 µL (25-fold analytes pre-concentration is achieved). Next bisphenols were identified by HPLC-DAD-FLD and quantified by LC-MS/MS equipment.

CONCLUSIONS

During the bisphenols HPLC-DAD-FLD analysis, from 6 min a reinforcement of 15 was used, which allowed analytes to be identified at 750 pg/mL. Application of LC-MS/MS allowed quantification of bisphenols in the range from 2.12 to 116.22 ng/mL in a total 27 human breast milk samples.

HIGHLIGHTS

First QuEChERS/d-SPE coupled with HPLC-DAD-FLD or LC-MS/MS method for the quantification of bisphenols and its analogues in breast milk Faster and cheaper alternative to traditional extraction methods The method was applied for the first biomonitoring of bisphenols and its analogues in breast milk.

MS-Based Molecular Networking of Designer Drugs as an Approach for the Detection of Unknown Derivatives for Forensic and Doping Applications: A Case of NBOMe Derivatives

The NBOMe family is a group of new psychoactive substances (NPSs). In this study, the fragmentation patterns of NBOMe derivatives were analyzed using liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QTOF/MS). The MS/MS spectral data was used to establish a molecular networking map for NBOMe derivatives. The fragmentation patterns of nine NBOMe derivatives were interpreted on the basis of their product ion spectral data. NBOMe derivatives generally showed similar product ion spectral patterns; among them, the halogen-substituted methoxybenzyl ethanamine type derivatives showed a characteristic product ion of a radical cation. Molecular network analysis of the MS/MS data revealed that all NBOMe derivatives formed one integrated networking cluster that discriminated them from other types of NPSs. NBOMe derivatives were spiked into human urine and identified by connection to the NBOMe database network. Furthermore, the NBOMe compounds that were not registered in the database were also recognized as an NBOMe-related substance by molecular networking. These results demonstrate the potential of using molecular networking-based screening methods for designer drugs, and the proposed method would be useful in forensic or doping analysis.

Mass Spectrometric Analysis of Bisphenol A Desorption from Titania Nanoparticles: Ammonium Acetate, Fluoride, Formate, and Hydroxide as Chemical Desorption Agents

Bisphenol A (BPA) is a widely used chemical in several consumer products and a well-studied environmental toxicant, and therefore, its accurate measurement is highly demanded. However, the co-presence of nanoparticles as an emerging class of contaminants could result in inaccurate determination of BPA due to binding of BPA onto nanoparticle surface. In this study, mass spectrometry (MS) was used to investigate desorption of BPA bound on the surface of titania (TiO₂) nanoparticles in water. Ammonium acetate, fluoride, formate, and hydroxide were evaluated as chemical agents for their desorption capabilities. The percentages of recovery, adsorption, and desorption were determined by this new method without requiring any prior separation of nanoparticles from BPA. MS analysis demonstrated the desorption of BPA by 10–20 mM of ammonium hydroxide for a mixture of 5 µg/mL BPA and 10 µg/mL TiO₂ nanoparticles, with a desorption efficiency of 72 ± 1%. Due to adsorption of BPA onto the nanoparticle surface that was inefficient for electrospray ionization, the resulting abundance of target ions could be reduced in the detection of BPA by mass spectrometry. As such, these findings collectively promise an accurate determination of the total BPA concentration in water whether it exists in the free or bound form. Efficient desorption of contaminants from the surface of nanoparticles would improve the accuracy of the contaminant analysis by mass spectrometry.

In Situ Determination of Bisphenol A in Beverage Using a Molybdenum Selenide/Reduced Graphene Oxide Nanoparticle Composite Modified Glassy Carbon Electrode

Due to the endocrine disturbing effects of bisphenol A (BPA) on organisms, rapid detection has become one of the most important techniques for monitoring its levels in the aqueous solutions associated with plastics and human beings. In this paper, a glassy carbon electrode (GCE) modified with molybdenum selenide/reduced graphene oxide (MoSe₂/rGO) was fabricated for in situ determination of bisphenol A in several beverages. The surface area of the electrode dramatically increases due to the existence of ultra-thin nanosheets in a flower-like structure of MoSe₂. Adding phosphotungstic acid in the electrolyte can significantly enhance the repeatability (RSD = 0.4%) and reproducibility (RSD = 2.2%) of the electrode. Under the optimized condition (pH = 6.5), the linear range of BPA was from 0.1 μM⁻100 μM and the detection limit was 0.015 μM (S/N = 3). When using the as-prepared electrode for analyzing BPA in beverage samples without any pretreatments, the recoveries ranged from 98⁻107%, and the concentrations were from below the detection limit to 1.7 μM, indicating its potential prospect for routine analysis of BPA.

Sensitive analysis of steroid estrogens and bisphenol a in small volumes of water using isotope-dilution ultra-performance liquid chromatography-tandem mass spectrometry

An isotope-dilution ultra-performance liquid chromatography-electrospray tandem mass spectrometry method combined with dansylation was established to sensitively quantify four steroid estrogens (estrone, 17α-estradiol, 17β-estradiol and 17α-ethynylestradiol) and bisphenol A in sewage influent and effluent. A simple hexane extraction was performed from a small volume (10 mL), followed by dansyl chloride derivatization and purification with a silica cartridge. The method effectively reduced the matrix effects in sample extract and permitted the selective and sensitive determination of target compounds from complicated matrices. The detection limits of the method for steroid estrogens were 0.20-0.90 ng L^-1 in influent and 0.10-0.20 ng L^-1 in effluent samples. For bisphenol A, the limits detection of the method were 20 and 0.80 for influent and effluent samples, respectively. Recoveries of 85%-96% were observed in all matrices. The method was applied to analyze residual estrogens and bisphenol A in sewage influent and effluent samples from Beijing, China. The concentrations of bisphenol A (636-1200 ng L^-1) were up to 250 times higher than those of steroid estrogens. Estrone was the dominant estrogen in influent and effluent samples, while similar concentrations of 17α-estradiol and 17β-estradiol were detected in all samples.

(-)ESI/CAD MSn Procedure for Sequencing Lignin Oligomers Based on a Study of Synthetic Model Compounds with β-O-4 and 5-5 Linkages

Seven synthesized G-lignin oligomer model compounds (ranging in size from dimers to an octamer) with 5-5 and/or β-O-4 linkages, and three synthesized S-lignin model compounds (a dimer, trimer, and tetramer) with β-O-4 linkages, were evaporated and deprotonated using negative-ion mode ESI in a linear quadrupole ion trap/Fourier transform ion cyclotron resonance mass spectrometer. The collision-activated dissociation (CAD) fragmentation patterns (obtained in MS² and MS³ experiments, respectively) for the negative ions were studied to develop a procedure for sequencing unknown lignin oligomers. On the basis of the observed fragmentation patterns, the measured elemental compositions of the most abundant fragment ions, and quantum chemical calculations, the most important reaction pathways and likely mechanisms were delineated. Many of these reactions occur via charge-remote fragmentation mechanisms. Deprotonated compounds with only β-O-4 linkages, or both 5-5 and β-O-4 linkages, showed major 1,2-eliminations of neutral compounds containing one, two, or three aromatic rings. The most likely mechanisms for these reactions are charge-remote Maccoll and retro-ene eliminations resulting in the cleavage of a β-O-4 linkage. Facile losses of H₂O and CH₂O were also observed for all deprotonated model compounds, which involve a previously published charge-driven mechanism. Characteristic "ion groups" and "key ions" were identified that, when combined with their CAD products (MS³ experiments), can be used to sequence unknown oligomers.

Investigation on fragmentation pathways of bisphenols by using electrospray ionization Orbitrap mass spectrometry

RATIONALE

Bisphenols, such as bisphenol A (BPA) and bisphenol S (BPS), are widely used in industrial products, although they have been demonstrated to be environmental contaminants with toxicity. However, few studies on the mass spectrometric fragmentation pathway of these compounds have been reported using high-resolution mass spectrometry (HRMS).

METHODS

The MS/MS fragmentations of nine bisphenols, together with several corresponding isotope-labeled compounds, were studied by Orbitrap MS using electrospray ionization (ESI) in negative ion mode and higher energy collisional-dissociation (HCD). The [M - H](-) ions of the compounds formed by ESI were selected as the precursor ions for MS/MS. The accurate m/z values for product ions were acquired to deduce the elemental compositions and fragmentation pathways.

RESULTS

The elemental compositions of the ions were calculated from the accurate mass data. Common MS/MS product ions and characteristic neutral losses were summarized. Six bisphenols formed the common product ion at m/z 93 (C6 H5 O). The [M - H](-) ions of five bisphenols were found to lose a phenol group (C6 H5 OH). Four bisphenols formed the [M - H - CH4 ](-) ion. The proposed fragmentation pathways of representative compounds of BPA and BPS were verified from the analysis of isotope-labeled compounds.

CONCLUSIONS

The MS/MS fragmentation pathways of nine bisphenols were, for the first time, systematically investigated with HRMS. The obtained data could be valuable for the identification of a variety of bisphenols in environmental and biological samples.

Determination and human exposure assessment of polybrominated diphenyl ethers and tetrabromobisphenol A in indoor dust in South Africa

The concentration of TBBPA in dust samples from automobiles (n = 14), computer laboratories (n = 8), homes (n = 7), and offices (n = 7), and, also, PBDE concentrations in the indoor dust of 19 personal and previously owned automobiles in Durban, South Africa, were determined. Gas chromatography coupled with mass spectrometry was applied for the separation, identification, and quantitation of TBBPA and PBDEs. The median concentrations of TBBPA were 1156, 269, 120, and 492 ng g(-1) in automobiles, computer laboratories, homes, and offices, respectively. The ∑ n = 8 PBDE in 19 automobile samples ranged from 573 to 11,833 ng g(-1). BDE-209 accounted for approximately 42% of ∑ n = 8 PBDE in the samples. Household characteristics influenced the distribution of TBBPA in the various microenvironments. By assuming an average dust ingestion rate, and a median TBBPA concentration, the ∑DED (in ng kg(-1) bw day(-1)) of TBBPA is 0.08, 0.08, and 0.60, for an adult, teenager, and toddler, respectively. These doses are similar to dust ingestion intakes reported for Asian countries where there is a high demand for TBBPA as a flame retardant. Similarly, automobiles provide ample opportunity for human exposure to PBDEs via dust ingestion, particularly for toddlers and occupationally exposed adults.

Biomonitoring of human exposures to chlorinated derivatives and structural analogs of bisphenol A

The high reactivity of bisphenol A (BPA) with disinfectant chlorine is evident in the instantaneous formation of chlorinated BPA derivatives (ClxBPA) in various environmental media that show increased estrogen-activity when compared with that of BPA. The documented health risks associated with BPA exposures have led to the gradual market entry of BPA structural analogs, such as bisphenol S (BPS), bisphenol F (BPF), bisphenol B (BPB), etc. A suite of exposure sources to ClxBPA and BPA analogs in the domestic environment is anticipated to drive the nature and range of halogenated BPA derivatives that can form when residual BPA comes in contact with disinfectant in tap water and/or consumer products. The primary objective of this review was to survey all available studies reporting biomonitoring protocols of ClxBPA and structural BPA analogs (BPS, BPF, BPB, etc.) in human matrices. Focus was paid on describing the analytical methodologies practiced for the analysis of ClxBPA and BPA analogs using hyphenated chromatography and mass spectrometry techniques, because current methodologies for human matrices are complex. During the last decade, an increasing number of ecotoxicological, cell-culture and animal-based and human studies dealing with ClxBPA exposure sources and routes of exposure, metabolism and toxicity have been published. Up to date findings indicated the association of ClxBPA with metabolic conditions, such as obesity, lipid accumulation, and type 2 diabetes mellitus, particularly in in-vitro and in-vivo studies. We critically discuss the limitations, research needs and future opportunities linked with the inclusion of ClxBPA and BPA analogs into exposure assessment protocols of relevant epidemiological studies.

Silver ion post-column derivatization electrospray ionization mass spectrometry for determination of tetrabromobisphenol A derivatives in water samples

Six TBBPA derivatives in water samples were sensitively electrospray ionized by Ag⁺ post-column derivatization and directly analyzed with HPLC-MS/MS.

Identification of two novel brominated contaminants in water samples by ultra-high performance liquid chromatography-Orbitrap Fusion Tribrid mass spectrometer

Tetrabromobisphenol A mono(2-hydroxyethyl ether) (TBBPA-MHEE) and TBBPA mono(glycidyl ether) (TBBPA-MGE), two impurities of TBBPA derivatives, were hypothesized to be novel brominated contaminants with potential toxicity. However, due to lacking of analytical method and pure standards, their environmental behavior and toxicity have not been studied. Herein we developed a sensitive method based on ultra-high performance liquid chromatography-Orbitrap Fusion Tribrid mass spectrometer (UHPLC-Orbitrap Fusion TMS) for simultaneous detection of TBBPA-MHEE and TBBPA-MGE in water samples. The sample pretreatment method and the experimental conditions of UHPLC and Orbitrap Fusion TMS, were optimized in detail. The instrument detection limits (IDLs) for TBBPA-MHEE and TBBPA-MGE were 0.5pg and 0.6pg, respectively. The method detection limits (MDLs) for TBBPA-MHEE and TBBPA-MGE in river water samples were 0.9 and 0.8ng/L. With the proposed method, we were able to detect TBBPA-MHEE and TBBPA-MGE for the first time in water samples and technical products of TBBPA derivatives. Therefore, UHPLC-Orbitrap Fusion TMS is a simple and effective tool for identification and quantification of novel contaminants in the environment.

Influence of household cleaning practices on the magnitude and variability of urinary monochlorinated bisphenol A

Low-dose health effects of BPA have not been adequately explored in the presence of BPA metabolites of chlorinated structure that may exert larger estrogenic effects than those of their parent compound. We hypothesized that chlorine-containing cleaning products used in household cleaning activities could modify the magnitude of total urinary BPA concentration measurements via the production of chlorinated BPA (ClBPA) derivatives. Our objective was to investigate the influence of typical household cleaning activities (dishwashing, toilet cleaning, mopping, laundry, etc.) on the magnitude and variability of urinary total BPA and mono-ClBPA levels in the general adult population. A cross-sectional study (n=224) included an adult (≥18 years) pool of participants from the general population of Nicosia, Cyprus. First morning urine voids were collected, and administered questionnaires included items about household cleaning habits, demographics, drinking water consumption rates and water source/usage patterns. Urinary concentrations of total BPA (range: 0.2-82 μg L(-1)), mono-ClBPA (16-340 ng L(-1)), and total trihalomethanes (0.1-5.0 μg L(-1)) were measured using gas chromatography coupled with triple quadrupole mass spectrometry and large volume injection. Linear multiple regression analysis revealed that dishwashing along with age and gender (females) were able to predict urinary mono-ClBPA levels (ng g(-1)), even after adjusting for covariates; this was not the case for urinary total BPA levels (ng g(-1)). Significant (p<0.001) association was observed between urinary mono-ClBPA and THM levels, underlying the important role of disinfectant (chlorine) in promoting formation of both ClBPA and THM. Urinary mono-ClBPA levels were measured for the first time using an appreciable sample size, highlighting the co-occurring patterns of both total BPA and mono-ClBPA. Epidemiological studies and probabilistic BPA risk assessment exercises should consider assessing daily intake estimates for chlorinated BPA compounds, as well.

Improved sample treatment for the determination of bisphenol A and its chlorinated derivatives in sewage sludge samples by pressurized liquid extraction and liquid chromatography-tandem mass spectrometry

A selective, sensitive, robust and accurate method for the determination of bisphenol A (BPA) and its chlorinated derivatives in sewage sludge samples using liquid chromatography-tandem mass spectrometry (LC-MS/MS) is presented. Prior to instrumental analysis, an extraction procedure using pressurized liquid extraction (PLE) was carried out in order to obtain the highest recoveries and improve sensitivity. After LC separation, the MS conditions, in negative atmospheric pressurized chemical ionization (APCI) mode, were individually optimized for each analyte to obtain maximum sensitivity in the selected reaction monitoring (SRM) mode. The use of two reactions for each compound allowed simultaneous quantification and identification in one run. The analytes were separated in less than 6 min. BPA-d(16) was used as internal standard. The limits of detection of the method ranged from 4 to 8 ng g(-1) and the limits of quantification from 14 to 26 ng g(-1), while inter- and intra-day variability was under 6% in all cases. Due to the absence of certified materials, the method was validated using matrix-matched calibration and a recovery assay with spiked samples. Recovery rates ranged from 97.7% to 100.6%. The method was satisfactorily applied for the determination BPA and its chlorinated derivatives in sewage sludge samples collected from wastewater treatment plants (WWTPs) located in the province of Granada (Spain). The sludge samples came from a conventional activated sludge (AS) plant and from a membrane bioreactor (MBR) pilot plant.

Identification and quantification of the migration of chemicals from plastic baby bottles used as substitutes for polycarbonate

The results of a study on the analytical identification and quantification of migration of chemicals from plastics baby bottles found in the European Union market made of materials that are now present as substitutes for polycarbonate (PC) are reported. A total of 449 baby bottles with a focus on first age or sets of bottles were purchased from 26 European Union countries, Canada, Switzerland and the USA. From this collection, which contained several duplicates, a total of 277 baby bottles were analysed. The materials included different types of plastic such as PC, polyamide (PA), polyethersulphone (PES), polypropylene (PP), but also silicone, and from the United States a co-polyester marketed under the trade name Tritan™. The bottles were subjected to the conventional migration test for hot fill conditions, i.e. 2 h at 70°C. The simulant used was that specified in European Union legislation (2007/19/EC) for milk, i.e. 50% ethanol. In a first phase 1, migration was conducted since the scope of this investigation was a screening rather than a true compliance testing check. Second and third migrations were performed on selected articles when migrated substances exceeded limits specified in the legislation. In order to verify some materials, a portion of the bottle was cut to run an FT-IR fingerprint to confirm the nature of the polymer. The migration solutions in general showed a low release of substances. Results showed that bottles made of PP and silicones showed a greater number of substances in the migration solutions and in greater quantity. Chemicals from PP included alkanes, which could be found in >65% of the bottles at levels up to 3500 µg kg⁻¹; and benzene derivatives in 17% of the baby bottles and found at levels up to 113 µg kg⁻¹. Some substances were found on a regular basis such as plasticisers, esters and antioxidants (e.g. tris(2,4-di-tert-butylphenyl)phosphate, known as Irgafos 168. Some substances found were not included in the Community positive list, which means that those should not be found even in the first migration. Such substances included 2,6-di-isopropylnaphthalene (DIPN), found in 4% of the bottles at levels up to 25 µg kg⁻¹, 2,4-di-tert-butyl phenol (in 90% of the bottles at levels up 400 µg kg⁻¹). Moreover, bisphenol A (BPA) was detected and quantified in baby bottles made of PA, but limited to one brand and model specific (but labelled BPA free). Results for baby bottles made of silicone also indicated the presence of components, e.g. potentially coming from inks (benzophenone, diisopropyl naphtahalene - DIPN, which could come for example from the presence of instruction leaflets in the bottles). In the case of silicone, phthalates were also found in relevant concentrations, with levels for DiBP and DBP from the first migration test of 50-150 µg kg⁻¹ and DEHP at levels 25-50 µg kg⁻¹.

Determination of bisphenol-A levels in human amniotic fluid samples by liquid chromatography coupled with mass spectrometry

Bisphenol A (BPA) is one of the environmental endocrine-disrupting chemicals used widely in common consumer products. There is an increasing concern about human exposure to BPA, particularly in fetuses, due to the potential adverse effects related to the estrogenic activity of BPA. In assessing environmental exposure to BPA, it is essential to have a sensitive, accurate, and specific analytical method, particularly for low BPA levels in complex sample matrices. In this study, we developed and validated an accurate, sensitive, and robust liquid chromatography-mass spectrometry (LC-MS) method for determining the BPA concentrations in human amniotic fluid (AF). In this method, BPA and the internal standards (13)C(12) -BPA were extracted from 500 μL of human AF using solid-phase extraction. Calibration curves were linear over a concentration range of 0.3-100 ng/mL for BPA. The analytes were quantitatively determined using LC-MS operated in a negative electrospray ionization selected ion monitoring mode. This validated method has been used successfully in the clinical sample analysis of BPA in second-trimester AF specimens.

Identification of tetrabromobisphenol A diallyl ether as an emerging neurotoxicant in environmental samples by bioassay-directed fractionation and HPLC-APCI-MS/MS

Brominated flame retardants (BFRs) have been widely used as additives in products to reduce their flammability. Recent findings suggested that some BFRs exhibit neurotoxicity and thus might pose a threat to human health. In this work, a neurotoxicity assay-directed analysis was developed, combining sample cleanup, fractionation, chemical identification, and bioassay. Viability of primary cultured cerebellar granule neurons (CGNs) was used to evaluate the neurotoxicity of extracts or separated fractions from environmental samples. Tetrabromobisphenol A diallyl ether (TBBPA DAE) was identified as the causative toxicant in sediment samples collected from a river near a brominated flame retardant (BFR) manufacturing plant in South China. Liquid chromatography atmospheric pressure chemical ionization tandem mass spectrometry (LC-APCI-MS/MS) was optimized to determine TBBPA DAE levels in the potent fractions and to confirm TBBPA DAE as the key neurotoxicant. On the basis of comparison with the structure of other TBBPA derivatives, the 1-propenyl group in TBBPA DAE appears to be the cause for the neurotoxic potency. The levels of TBBPA DAE in samples along the river were found at up to 49 ng/L for river water, 10,183 ng/g dry weight (dw) in surface sediments, and 42 ng/g dw in soils. According to the distribution of TBBPA DAE in the environmental samples, the manufacturing plant was identified as the release source of TBBPA DAE. To our knowledge, this study is the first to demonstrate potential neurotoxicity induced by TBBPA DAE in real environmental samples.

Quantitation of free and total bisphenol A in human urine using liquid chromatography-tandem mass spectrometry

Bisphenol A (BPA) is employed in the synthesis of polycarbonate plastics and epoxy resins and is widely used in consumer products including as a coating for the inside of almost all food and beverage containers and thermal-imaging paper. Bisphenol A is considered to have important health implications because it possesses weak estrogenic activity and can leach from storage containers resulting in its consumption by both humans and animals. It is metabolized in the body and excreted into urine as a glucuronide derivative. In this report, we present an accurate, selective, sensitive, and reproducible high-performance liquid chromatography/tandem mass spectrometry (HPLC/MS/MS) method for the quantitation of BPA in human urine, which is not prone to exogenous contamination. BPA-glucuronide is hydrolyzed enzymatically, extracted with toluene, derivatized with dansyl chloride, and the BPA-(dansyl)(2) derivative is analyzed using reversed-phase HPLC/MS/MS. Calibration was linear to 50 ng/mL with a limit of quantitation of 50 pg/mL and a limit of detection of 5 pg/mL.

Multiple-stage mass spectrometry analysis of bisphenol A diglycidyl ether, bisphenol F diglycidyl ether and their derivatives

The fragmentation of bisphenol A diglycidyl ether (BADGE), bisphenol F diglycidyl ether (BFDGE) and their derivatives was studied by electrospray ionization tandem mass spectrometry. Multiple-stage mass spectrometry and accurate mass measurements were combined to establish the fragmentation pathways. BADGEs and BFDGEs tend to form ammonium adducts under electrospray conditions which fragmented easily. The fragmentation of [M+NH(4)](+) for BADGEs started with the cleavage of the phenyl-alkyl bond, which was followed by the α-cleavage of the ether group to generate the characteristic product ions at m/z 135, [C(9)H(11)O](+), and m/z 107, [C(7)H(7)O](+). The fragmentation of the BFDGE isomer mixtures was studied by on-line reversed-phase liquid chromatography coupled to multiple-stage mass spectrometry (LC/MS(n)). Information obtained from product ion spectra for each BFDGE isomer and its comparison with the fragmentation pathway of BADGE allowed each isomer and the chromatographic elution order to be identified.

Advances in structure elucidation of small molecules using mass spectrometry

The structural elucidation of small molecules using mass spectrometry plays an important role in modern life sciences and bioanalytical approaches. This review covers different soft and hard ionization techniques and figures of merit for modern mass spectrometers, such as mass resolving power, mass accuracy, isotopic abundance accuracy, accurate mass multiple-stage MS(n) capability, as well as hybrid mass spectrometric and orthogonal chromatographic approaches. The latter part discusses mass spectral data handling strategies, which includes background and noise subtraction, adduct formation and detection, charge state determination, accurate mass measurements, elemental composition determinations, and complex data-dependent setups with ion maps and ion trees. The importance of mass spectral library search algorithms for tandem mass spectra and multiple-stage MS(n) mass spectra as well as mass spectral tree libraries that combine multiple-stage mass spectra are outlined. The successive chapter discusses mass spectral fragmentation pathways, biotransformation reactions and drug metabolism studies, the mass spectral simulation and generation of in silico mass spectra, expert systems for mass spectral interpretation, and the use of computational chemistry to explain gas-phase phenomena. A single chapter discusses data handling for hyphenated approaches including mass spectral deconvolution for clean mass spectra, cheminformatics approaches and structure retention relationships, and retention index predictions for gas and liquid chromatography. The last section reviews the current state of electronic data sharing of mass spectra and discusses the importance of software development for the advancement of structure elucidation of small molecules. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s12566-010-0015-9) contains supplementary material, which is available to authorized users.

Recent advances in mass spectrometry analysis of phenolic endocrine disruptors and related compounds

This article reviews recent literature on current methodologies based on chromatography coupled to mass spectrometry to analyze phenolic compounds with endocrine-disrupting capabilities. For this review we chose alkylphenol ethoxylates, bisphenol A, bisphenol F, and their degradation products and halogenated derivatives, which are considered important environmental contaminants. Additionally, some related compounds such as bisphenol diglycidylethers were included. Growing attention has been paid to the mass spectrometric characterization of these compounds and the instrumentation and strategies used for their quantification and confirmation. The current use of gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS) methodologies with different mass spectrometers and ionization and monitoring modes is discussed. Practical aspects with regards to the use of these analytical techniques, such as derivatizing reagents in GC-MS, ion suppression in LC-MS, and the most problematic aspects of quantification, are included in the discussion.

Simultaneous determination of hexabromocyclododecane, tetrabromobisphenol A, and related compounds in sewage sludge and sediment samples from Ebro River basin (Spain)

This paper describes the development of a methodology for the simultaneous determination and quantification of hexabromocyclododecane (HBCD), tetrabromobisphenol A (TBBPA), and related compounds (bisphenol A, monobromobisphenol A, dibromobisphenol A, and tribromobisphenol A) in sludge and sediment samples. The selected method is based on an extraction with dichloromethane: methanol followed by purification via SPE C(18) cartridges. Instrumental determination was carried out by liquid chromatography-quadrupole linear ion trap mass spectrometry (LC-QqLIT-MS), with quantification based on isotopic dilution method. Analyte recoveries were in the range of 39-120% and 88-126% for spiked sewage and sediment, respectively. Repeatability of replicate extractions was better than 13% relative standard deviation. Linearity was checked in the range of 0.05 and 25 injected nanograms. Limits of detection (LODs) and limits of quantification (LOQs) were in the range of 0.6 and 2.7 ng/g and 1.4 and 66 ng/g for sediment and sludge samples, respectively. The developed method was applied to sewage sludge and sediment samples collected along the Ebro River and Cinca River, one of its tributaries (northeast of Spain). TBBPA levels in sewage sludge ranged from not quantified to 1,329 ng/g dw, whereas levels in sediment samples were lower, between not detected and 15 ng/g dw. As regards HBCD, concentrations were between not detected and 375 ng/g for sludge samples and 0.8 and 1850 ng/g for sediments.