Highly Conductive Ti3 C2 Tx MXene Hybrid Fibers for Flexible and Elastic Fiber-Shaped Supercapacitors

Boron Quantum Dots Pillared Ti3 C2 Tx Membrane Electrode with High Rate Performance for Supercapacitor

A sonication-assisted liquid-phase preparation technique is developed to prepare boron quantum dots (BQDs) with a lateral size of 3 nm in a solution of NMP and NBA; it shows a direct bandgap semiconductor with a bandgap of 3 eV and a specific capacitance of 41 F g-1 . A BQDs(10)-Ti3 C2 Tx membrane electrode with excellent capacitance and high flexibility is prepared by using Ti3 C2 Tx nanosheets (NSs) as assembled units and BQDs as pillar; it gives a specific capacitance of 524 F g-1 at 1 A g-1 in 6 m H2 SO4 electrolyte, a high capacity retention of 75%, and a minimum relaxation time of 0.51 s. An all-solid-state BQDs(10)-Ti3 C2 Tx flexibility supercapacitor is assembled by using a BQDs(10)-Ti3 C2 Tx membrane as electrodes and PVA/H2 SO4 hydrogel as electrolyte; it not only shows an area specific capacitance of 552 mF cm-2 at 1.25 mA cm-2 , a retention rate of 75%, a capacity retention of 93% after 5000 cycles, and an energy density of 40.4 Wh cm-3 at a volume power density of 416 W cm-3 , but also provides superior flexibility and can be bent to different degrees, showing that the assembled BQDs(10)-Ti3 C2 Tx membrane electrode and BQDs(10)-Ti3 C2 Tx flexible supercapacitor display broad application prospects in field of portable/wearable electronic devices.

Wide Temperature All-Solid-State Ti3 C2 Tx Quantum Dots/L-Ti3 C2 Tx Fiber Supercapacitor with High Capacitance and Excellent Flexibility

Ti3 C2 Tx Quantum dots (QDs)/L-Ti3 C2 Tx fiber electrode (Q3 M7 ) with high capacitance and excellent flexibility is prepared by a wet spinning method. The assembled units Ti3 C2 Tx nanosheets (NSs) with large size (denoted as L-Ti3 C2 Tx ) is obtained by natural sedimentation screen raw Ti3 AlC2 , etching, and mechanical delamination. The pillar agent Ti3 C2 Tx QDs is fabricated by an ultrasound method. Q3 M7 fiber electrode gave a specific capacitance of 1560 F cm-3 , with a capacity retention rate of 79% at 20 A cm-3 , and excellent mechanical strength of 130 Mpa. A wide temperature all-solid-state the delaminated montmorillonite (F-MMT)/Polyvinyl alcohol (PVA) dimethyl sulfoxide (DMSO) flexible hydrogel (DHGE) (F-MMT/PVA DHGE) Q3 M7 fiber supercapacitor is assembled by using Q3 M7 fiber as electrodes and F-MMT/PVA DHGE as electrolyte and separator. It showed a volume specific capacitance of 413 F cm-3 at 0.5 A cm-3 , a capacity retention of 97% after 10 000 cycles, an energy density of 36.7 mWh cm-3 at a power density of 311 mW cm-3 , and impressive capacitance and flexibility over a wide temperature range of -40 to 60 °C. This work provides an effective strategy for designing and assembling wide temperature all-solid-state fiber supercapacitors with optimal balance of capacitive performance and flexibility.

Unleashing the Potential of MXene-Based Flexible Materials for High-Performance Energy Storage Devices

Since the initial discovery of Ti3 C2 a decade ago, there has been a significant surge of interest in 2D MXenes and MXene-based composites. This can be attributed to the remarkable intrinsic properties exhibited by MXenes, including metallic conductivity, abundant functional groups, unique layered microstructure, and the ability to control interlayer spacing. These properties contribute to the exceptional electrical and mechanical performance of MXenes, rendering them highly suitable for implementation as candidate materials in flexible and wearable energy storage devices. Recently, a substantial number of novel research has been dedicated to exploring MXene-based flexible materials with diverse functionalities and specifically designed structures, aiming to enhance the efficiency of energy storage systems. In this review, a comprehensive overview of the synthesis and fabrication strategies employed in the development of these diverse MXene-based materials is provided. Furthermore, an in-depth analysis of the energy storage applications exhibited by these innovative flexible materials, encompassing supercapacitors, Li-ion batteries, Li-S batteries, and other potential avenues, is conducted. In addition to presenting the current state of the field, the challenges encountered in the implementation of MXene-based flexible materials are also highlighted and insights are provided into future research directions and prospects.

Interfacial Modulation of Ti3 C2 Tx MXene by Cellulose Nanofibrils to Construct Hybrid Fibers with High Volumetric Specific Capacitance

The intrinsic poor rheological properties of MXene inks result in the MXene nanosheets in dried MXene microfibers prone to self-stacking, which is not conducive to ion transport and diffusion, thus affecting the electrochemical performance of fiber-based supercapacitors. Herein, robust cellulose nanofibrils (CNF)/MXene hybrid fibers with high electrical conductivity (916.0 S cm-1 ) and narrowly distributed mesopores are developed by wet spinning. The interfacial interaction between CNF and MXene can be enhanced by hydrogen bonding and electrostatic interaction due to their rich surface functional groups. The interfacial modulation of MXene by CNF can not only regulate the rheology of MXene spinning dispersion, but also enhance the mechanical strength. Furthermore, the interlayer distance and self-stacking effect of MXene nanosheets are also regulated. Thus, the ion transport path within the fiber material is optimized and ion transport is accelerated. In H2 SO4 electrolyte, a volumetric specific capacitance of up to 1457.0 F cm-3 (1.5 A cm-3 ) and reversible charge/discharge stability are demonstrated. Intriguingly, the assembled supercapacitors exhibit a high-volume energy density of 30.1 mWh cm-3 at 40.0 mW cm-3 . Moreover, the device shows excellent flexibility and cycling stability, maintaining 83% of its initial capacitance after 10 000 charge/discharge cycles. Practical energy supply applications (Power for LED and electronic watch) can be realized.

Interlocking-Governed Ultra-Strong and Highly Conductive MXene Fibers Through Fluidics-Assisted Thermal Drawing

High-performance MXene fibers are always of significant interest for flexible textile-based devices. However, achieving high mechanical property and electrical conductivity remains challenging due to the uncontrolled loose microstructures of MXene (Ti3 C2 Tx and Ti3 CNTx ) nanosheets. Herein, high-performance MXene fibers directly obtained through fluidics-assisted thermal drawing are demonstrated. Tablet interlocks are formed at the interface layer between the outer cyclic olefin copolymer and inner MXene nanosheets due to the thermal drawing induced stresses, resulting in thousands of meters long macroscopic compact MXene fibers with ultra-high tensile strength, toughness, and outstanding electrical conductivity. Further, large-scale woven textiles constructed by these fibers offer exceptional electromagnetic interference shielding performance with excellent durability and stability. Such an effective and sustainable approach can be applied to produce functional fibers for applications in both daily life and aerospace.

Microfluidic-Assembled Covalent Organic Frameworks@Ti3 C2 Tx MXene Vertical Fibers for High-Performance Electrochemical Supercapacitors

The delicate design of innovative and sophisticated fibers with vertical porous skeleton and eminent electrochemical activity to generate directional ionic pathways and good faradic charge accessibility is pivotal but challenging for realizing high-performance fiber-shaped supercapacitors (FSCs). Here, hierarchically ordered hybrid fiber combined vertical-aligned and conductive Ti3 C2 Tx MXene (VA-Ti3 C2 Tx ) with interstratified electroactive covalent organic frameworks LZU1 (COF-LZU1) by one-step microfluidic synthesis is developed. Due to the incorporation of vertical channels, abundant redox active sites and large accessible surface area throughout the electrode, the VA-Ti3 C2 Tx @COF-LZU1 fibers express exceptional gravimetric capacitance of 787 F g-1 in a three-electrode system. Additionally, the solid-state asymmetric FSCs deliver a prominent energy density of 27 Wh kg-1 , capacitance of 398 F g-1 and cycling life of 20 000 cycles. The key to high energy storage ability originates from the decreased ions adsorption energy and ameliorative charge density distribution in vertically aligned and active hybrid fiber, accelerating ions transportation/accommodation and interfacial electrons transfer. Benefiting from excellent electrochemical performance, the FSCs offer sufficient energy supply to power watches, flags, and digital display tubes as well as be integrated with sensors to detect pulse signals, which opens a promising route for architecting advanced fiber toward the carbon neutrality market beyond energy-storage technology.

Rheology Engineering for Dry-Spinning Robust N-Doped MXene Sediment Fibers toward Efficient Charge Storage

MXene nanosheets are believed to be an ideal candidate for fabricating fiber supercapacitors (FSCs) due to their metallic conductivity and superior volumetric capacitance, while challenges remain in continuously collecting bare MXene fibers (MFs) via the commonly used wet-spinning technique due to the intercalation of water molecules and a weak interaction between Ti3 C2 TX nanosheets in aqueous coagulation bath that ultimately leads to a loosely packed structure. To address this issue, for the first time, a dry-spinning strategy is proposed by engineering the rheological behavior of Ti3 C2 TX sediment and extruding the highly viscose stock directly through a spinneret followed by a solvent evaperation induced solidification. The dry-spun Ti3 C2 TX fibers show an optimal conductivity of 2295 S cm-1 , a tensile strength of 64 MPa and a specific capacitance of 948 F cm-3 . Nitrogen (N) doping further improves the capacitance of MFs to 1302 F cm-3 without compromising their mechanical and electrical properties. Moreover, the FSC based on N-doped MFs exhibits a high volumetric capacitance of 293 F cm-3 , good stability over 10 000 cycles, excellent flexibility upon bending-unbending, superior energy/power densities and anti-self-discharging property. The excellent electrochemical and mechanical properties endow the dry-spun MFs great potential for future applications in wearable electronics.

Recent Advances in MXene-Based Fibers: Fabrication, Performance, and Application

Two-dimensional transition metal carbide/nitrides (MXenes) have recently received extensive attention due to their diverse material types and versatile structures, large-scale production, and excellent properties. MXene sheets possess abundant hydrophilic functional groups on their surface, which enable them to be assembled into macroscopic fibers or compounded with other functional materials to produce composite fibers. This review aims to provide a comprehensive analysis of MXene fibers in terms of their fabrication, structure, properties, and recent applications as flexible and wearable electronics. The review will discuss the principles of different methods used to synthesize MXene fibers and analyze the characteristics of the as-synthesized fibers, with a particular focus on the wet spinning method. The fundamental relationships between the microstructure of MXene fibers and their resulting mechanical and electrical properties will be explored. Furthermore, the review will elaborate on the progress made in MXene-based fibers in the rapidly growing field of wearable electronics applications, provide insights into future development of MXene fiber materials and propose solutions to the challenges facing practical applications.

Robust PANI@MXene/GQDs-Based Fiber Fabric Electrodes via Microfluidic Wet-Fusing Spinning Chemistry

Two-dimensional transition metal titanium carbide (Ti3 C2 Tx ) as a promising candidate material for batteries and supercapacitors has shown excellent electrochemical performance, but it is difficult to meet practical applications because of its poor morphology structure, low mechanical properties, and expensive process. Here, an applied and efficient method based on microfluidic wet-fusing spinning chemistry (MWSC) is proposed to construct hierarchical structure of MXene-based fiber fabrics (MFFs), allowing the availability of MFF electrodes with ultrastrong toughness, high conductivity, and easily machinable properties. First, a dot-sheet structure constructed by graphene quantum dots (GQDs) and MXene nanosheets with multianchor interaction in the microchannel of a microfluidic device enhances the mechanical strength of MXene fibers; next, the interfused fiber network structure of Ti3 C2 Tx /GQDs fabrics assembled by the MWSC process enhances the deformability of the whole fabrics; finally, the core-shell structure of PANI@Ti3 C2 Tx /GQDs architected by in-situ polymerization growth of polyaniline (PANI) nanofibers provides more ion-accessible pathways and sites for kinetic migration and ion accumulation. Through the morphology and microstructure design, this strategy has directive significance to the large-scale preparation of conductive fabric electrodes and provides a viable solution for simultaneously enhancing mechanical strength and electrochemical performance of conductive fabric electrodes.

Fibrous wearable and implantable bioelectronics

Fibrous wearable and implantable devices have emerged as a promising technology, offering a range of new solutions for minimally invasive monitoring of human health. Compared to traditional biomedical devices, fibers offer a possibility for a modular design compatible with large-scale manufacturing and a plethora of advantages including mechanical compliance, breathability, and biocompatibility. The new generation of fibrous biomedical devices can revolutionize easy-to-use and accessible health monitoring systems by serving as building blocks for most common wearables such as fabrics and clothes. Despite significant progress in the fabrication, materials, and application of fibrous biomedical devices, there is still a notable absence of a comprehensive and systematic review on the subject. This review paper provides an overview of recent advancements in the development of fibrous wearable and implantable electronics. We categorized these advancements into three main areas: manufacturing processes, platforms, and applications, outlining their respective merits and limitations. The paper concludes by discussing the outlook and challenges that lie ahead for fiber bioelectronics, providing a holistic view of its current stage of development.

Carbonized Syndiotactic Polystyrene/Carbon Nanotube/MXene Hybrid Aerogels with Egg-Box Structure: A Platform for Electromagnetic Interference Shielding and Solar Thermal Energy Management

Functional materials for electromagnetic interference (EMI) shielding are a consistently hot topic in the booming communication engineering, proceeding the development that tends to the multifunctional EMI shielding materials. Herein, a series of carbonized syndiotactic polystyrene/carbon nanotube/MXene (CsPS/CNT/MXene) hybrid aerogels were fabricated for EMI shielding and solar thermal energy conversion purposes. To fabricate the hybrid aerogels, a porous CNT/MXene framework was initially prepared using freeze-casting. Subsequently, sPS was infused into the porous structure, followed by hyper-cross-linking and carbonization of sPS under an inert atmosphere. The resulting aerogels exhibited a distinctive egg-box structure, comprising numerous nanofibrous carbon microspheres embedded within the lamellar framework. The mass ratio between CNT and MXene was regulated to identify an optimum aerogel, that is, the CCM-4-6, which exhibited impressive properties including Young's compression modulus of 0.67 MPa, a water contact angle of 137.6 ± 4.1°, a specific surface area of 110 m2 g-1, an electrical conductivity of 43.0 S m-1, and an EMI SE value of 40 dB. Meanwhile, phase-change composites were fabricated through encapsulating paraffin wax within the hybrid aerogels. For the CCM-4-6 aerogel, a noteworthy encapsulation ratio was achieved at about 76.7%, along with remarkable latent heat, good thermal reliability, and commendable solar thermal energy conversion capacity. This study presents a facile route to prepare multifunctional EMI shielding materials.

Enable Multi-Stimuli-Responsive Biomimetic Actuation with Asymmetric Design of Graphene-Conjugated Conductive Polymer Gradient Film

In this paper, multiresponsive actuators based on asymmetric design of graphene-conjugated poly(3,4-ethylene dioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) gradient films have been developed by a simple drop casting method. The biomimetic actuation is attributed to the hygroscopic expansion property of PEDOT:PSS and the gradient distribution of graphene sheets within the film, which resembles the hierarchical swelling tissues of some plants in nature. Graphene-conjugated PEDOT:PSS (GCP) actuators exhibit reversible bending behavior under multistimuli such as moisture, organic vapor, electrothermal, and photothermal heating. Noticeably, the bending curvature reaches 2.15 cm-1 under applied voltage as low as 1.5 V owing to the high electrical conductivity of GCP actuator. To mimic the motions of nyctinastic plants, a GCP artificial flower that spreads its petals under sunlight illumination has been fabricated. GCP actuators have been also demonstrated as intelligent light-controlled switches for light-emitting diodes and smart curtains for thermal management. Not only do the GCP gradient films exhibit potential applications in flexible electronics and energy harvesting/storage devices but also the facile fabrication of multiresponsive GCP actuators may shed light on the development of soft robotics, artificial muscles, wearable electronics, and smart sensors.

MXene Fibers for Flexible and Wearable Electronics: Recent Progress and Future Perspectives

With the impetus of flexible electronics and micro-nano fabrication technology, the human demand for flexible intelligent wearable devices is on an upsurge. In recent years, new functional fibers have undergone rapid development and emerged as an indispensable carrier of flexible wearable e-textiles. However, to achieve their functional applications and durability, new functional fibers must possess good electrical and mechanical properties. As an emerging two-dimensional material, MXenes have attracted immense attention for their high electrical conductivity, mechanical strength, specific surface area, adjustable surface properties, and exceptional processability. As such, MXenes have become an ideal candidate for the primary functional component of functional fibers. This paper presents a comprehensive review of research progress on MXene-based fibers in the construction of flexible wearable electronic textiles. Firstly, we briefly outline the preparation methods of MXenes materials. Next, we summarize the processing types of MXene-based fibers and highlight their performance parameters. Lastly, we summarize the primary application scenarios of MXene-based fibers and anticipate the future development of flexible wearable e-textiles.

Applications of X-Ray-Based Characterization in MXene Research

X-rays are a penetrating form of high-energy electromagnetic radiation with wavelengths ranging from 10 pm to 10 nm. Similar to visible light, X-rays provide a powerful tool to study the atoms and elemental information of objects. Different characterization methods based on X-rays are established, such as X-ray diffraction, small- and wide-angle X-ray scattering, and X-ray-based spectroscopies, to explore the structural and elemental information of varied materials including low-dimensional nanomaterials. This review summarizes the recent progress of using X-ray related characterization methods in MXenes, a new family of 2D nanomaterials. These methods provide key information on the nanomaterials, covering synthesis, elemental composition, and the assembly of MXene sheets and their composites. Additionally, new characterization methods are proposed as future research directions in the outlook section to enhance understanding of MXene surface and chemical properties. This review is expected to provide a guideline for characterization method selection and aid in precise interpretation of the experimental data in MXene research.

How Practical Are Fiber Supercapacitors for Wearable Energy Storage Applications?

Future wearable electronics and smart textiles face a major challenge in the development of energy storage devices that are high-performing while still being flexible, lightweight, and safe. Fiber supercapacitors are one of the most promising energy storage technologies for such applications due to their excellent electrochemical characteristics and mechanical flexibility. Over the past decade, researchers have put in tremendous effort and made significant progress on fiber supercapacitors. It is now the time to assess the outcomes to ensure that this kind of energy storage device will be practical for future wearable electronics and smart textiles. While the materials, fabrication methods, and energy storage performance of fiber supercapacitors have been summarized and evaluated in many previous publications, this review paper focuses on two practical questions: Are the reported devices providing sufficient energy and power densities to wearable electronics? Are the reported devices flexible and durable enough to be integrated into smart textiles? To answer the first question, we not only review the electrochemical performance of the reported fiber supercapacitors but also compare them to the power needs of a variety of commercial electronics. To answer the second question, we review the general approaches to assess the flexibility of wearable textiles and suggest standard methods to evaluate the mechanical flexibility and stability of fiber supercapacitors for future studies. Lastly, this article summarizes the challenges for the practical application of fiber supercapacitors and proposes possible solutions.

Nacre-Inspired Strong MXene/Cellulose Fiber with Superior Supercapacitive Performance via Synergizing the Interfacial Bonding and Interlayer Spacing

MXene fibers are promising candidates for weaveable and wearable energy storage devices because of their good electrical conductivity and high theoretical capacitance. Herein, we propose a nacre-inspired strategy for simultaneously improving the mechanical strength, volumetric capacitance, and rate performance of MXene-based fibers through synergizing the interfacial interaction and interlayer spacing between Ti₃C₂T_X nanosheets. The optimized hybrid fibers (M-CMC-1.0%) with 99 wt % MXene loading exhibit an improved tensile strength of ∼81 MPa and a high specific capacitance of 885.0 F cm^-3 at 1 A cm^-3 together with an outstanding rate performance of 83.6% retention at 10 A cm^-3 (740.0 F cm^-3). As a consequence, the fiber supercapacitor (FSC) based on the M-CMC-1.0% hybrid delivers an output capacitance of 199.5 F cm^-3, a power density of 1186.9 mW cm^-3, and an energy density of 17.7 mWh cm^-3, respectively, implying its promising applications as portable energy storage devices for future wearable electronics.

Research progress of two-dimensional antimonene in energy storage and conversion

Since the first proposal of antimonene in 2015, extensive research attention has been drawn to its application in energy storage and conversion because of its excellent layered structure and fast ion diffusion properties. However, in contrast to the revolutionary expansion of antimonene-based energy devices, reviews on this topic that summarize and further guide the design of 2D antimonene for energy storage and conversion are rare. In this review, the structure, physicochemical properties, and popular synthesis approaches of antimonene are first summarised. Specifically, the rational design and application of antimonene in energy storage and conversion such as electrochemical batteries and supercapacitors, electrocatalytic hydrogen evolution reaction, electrocatalytic oxygen evolution reaction, electrocatalytic carbon dioxide reduction, photocatalytic reduction of organic pollution, photocatalytic reduction of carbon dioxide (CO₂), solar cells and photovoltaic devices are outlined. Finally, opportunities and challenges are presented to further advance the development and application of antimonene in energy conversion and storage.

A review on accelerated development of skin-like MXene electrodes: from experimental to machine learning

Foreshadowing future needs has catapulted the progress of skin-like electronic devices for human-machine interactions. These devices possess human skin-like properties such as stretchability, self-healability, transparency, biocompatibility, and wearability. This review highlights the recent progress in a promising material, MXenes, to realize soft, deformable, skin-like electrodes. Various structural designs, fabrication strategies, and rational guidelines adopted to realize MXene-based skin-like electrodes are outlined. We explicitly discussed machine learning-based material informatics to understand and predict the properties of MXenes. Finally, an outlook on the existing challenges and the future roadmap to realize soft skin-like MXene electrodes to facilitate technological advances in the next-generation human-machine interactions has been described.

Compression-tolerant supercapacitor based on NiCo2O4/Ti3C2Tx MXene/reduced graphene oxide composite aerogel with insights from density functional theory simulations

Compression-tolerant electrodes are critical for developing next-generation wearable energy storage devices. However, most of previous studies on compressible electrodes focus on carbon-based materials, whereas metal-based materials such as spinel metal oxide with faradaic nature have been rarely studied due to their lack of compressibility. Herein, NiCo₂O₄ (NCO) microtubes assembled by ultrathin and mesoporous nanosheets, are deposited on/into Ti₃C₂T_x MXene/reduced graphene oxide aerogel (MGA), an intrinsically compressible host template with high conductivity and specific surface areas. The optimized NCO/MGA-300 sample shows a reversible compressive strain of 60% and a superior durability. Density functional theory (DFT) calculations reveal that the NCO/MGA-300 heterojunction has high electronic conductivity, fast electron transfer ability, and low adsorption energy for OH^- ions. As a result, the NCO/MGA-300 electrode exhibits superb electrochemical performance in terms of its high gravimetric capacitance (1633F g^-1 at 1 A g^-1), rate performance (1492F g^-1 at 10 A g^-1), and remarkable cycling stability of 86.6% after 10,000 charge-discharging cycles. Moreover, an assembled asymmetric supercapacitor based on compressible NCO/MGA-300 shows stable electrochemical performances under different compressive strains (20%. 40% and 60%), or after 100 compression-release cycles. This research finding demonstrates the possibility of metal-based electrode for wearable devices with high energy storage capability and good compressibility.

All-solid-state Ti3C2Tx neutral symmetric fiber supercapacitors with high energy density and wide temperature range

All-solid-state Ti₃C₂T_x neutral symmetric fiber supercapacitors (PVA EGHG Ti₃C₂T_x FSCs) with high energy density and wide temperature range are constructed by using polyvinyl alcohol (PVA)-ethylene glycol hydrogel (EGHG)-sodium perchlorate (NaClO₄) as electrolyte and separator, and Ti₃C₂T_x fiber as electrodes. Ti₃C₂T_x fiber is prepared using 130 mg mL^-1 Ti₃C₂T_x nanosheet ink as an assembly unit in a coagulation bath of isopropyl alcohol (IPA) and distilled water with 5 wt% CaCl₂ by a wet spinning method. The prepared Ti₃C₂T_x fiber exhibits a specific capacity of 385 F cm^-3 and a capacitance retention of 94 % after 10,000 cycles in 1 M NaClO₄ electrolyte. The assembled PVA EGHG Ti₃C₂T_x FSCs deliver a specific capacitance of 41 F cm^-3, a volumetric energy density of 5 mWh cm^-3, and a capacitance retention of 92 % after 500 times continuous bending. Furthermore, it shows good flexibility and excellent capacitance over a wide temperature range of -40 to 40 °C and maintains its electrochemical performance under varying degrees of bending. This study provides a viable strategy for designing and assembling all-solid-state neutral symmetric fiber supercapacitors with high energy density and wide temperature range.

Extremely Robust and Multifunctional Nanocomposite Fibers for Strain-Unperturbed Textile Electronics

Textile electronics are needed that can achieve strain-unaltered performance when they undergo irregular and repeated strain deformation. Such strain-unaltered textile electronics require advanced fibers that simultaneously have high functionalities and extreme robustness as fabric materials. Current synthetic nanocomposite fibers based on inorganic matrix have remarkable functionalities but often suffer from low robustness and poor tolerance against crack formation. Here, we present a design for a high-performance multifunctional nanocomposite fiber that is mechanically and electrically robust, which was realized by crosslinking titanium carbide (MXene) nanosheets with a slide-ring polyrotaxane to form an internal mechanically-interlocked network. This inorganic matrix nanocomposite fiber featured distinct strain-hardening mechanical behavior and exceptional load-bearing capability (toughness approaching 60 MJ m^-3 and ductility over 27%). It retained 100% of its ductility after cyclic strain loading. Moreover, the high electrical conductivity (>1.1 × 10⁵ S m^-1 ) and electrochemical performance (>360 F cm^-3 ) of the nanocomposite fiber can be well retained after subjecting the fiber to extensive (>25% strain) and long-term repeated (10 000 cycles) dimensional changes. Such superior robustness allowed for the fabrication of the nanocomposite fibers into various robust wearable devices, such as textile-based electromechanical sensors with strain-unalterable sensing performance and fiber-shaped supercapacitors with invariant electrochemical performance for 10 000 strain loading cycles.

Nanostructured Conducting Polymers and Their Applications in Energy Storage Devices

Due to the energy requirements for various human activities, and the need for a substantial change in the energy matrix, it is important to research and design new materials that allow the availability of appropriate technologies. In this sense, together with proposals that advocate a reduction in the conversion, storage, and feeding of clean energies, such as fuel cells and electrochemical capacitors energy consumption, there is an approach that is based on the development of better applications for and batteries. An alternative to commonly used inorganic materials is conducting polymers (CP). Strategies based on the formation of composite materials and nanostructures allow outstanding performances in electrochemical energy storage devices such as those mentioned. Particularly, the nanostructuring of CP stands out because, in the last two decades, there has been an important evolution in the design of various types of nanostructures, with a strong focus on their synergistic combination with other types of materials. This bibliographic compilation reviews state of the art in this area, with a special focus on how nanostructured CP would contribute to the search for new materials for the development of energy storage devices, based mainly on the morphology they present and on their versatility to be combined with other materials, which allows notable improvements in aspects such as reduction in ionic diffusion trajectories and electronic transport, optimization of spaces for ion penetration, a greater number of electrochemically active sites and better stability in charge/discharge cycles.

A Novel Aqueous Asymmetric Supercapacitor based on Pyrene-4,5,9,10-Tetraone Functionalized Graphene as the Cathode and Annealed Ti3 C2 Tx MXene as the Anode

Asymmetric supercapacitors (ASCs), employing two dissimilar electrode materials with a large redox peak position difference as cathode and anode, have been designed to further broaden the voltage window and improve the energy density of supercapacitors. Organic molecule based electrodes can be constructed by combining redox-active organic molecules with conductive carbon-based materials such as graphene. Herein, pyrene-4,5,9,10-tetraone (PYT), a redox-active molecule with four carbonyl groups, exhibits a four-electron transfer process and can potentially deliver a high capacity. PYT is noncovalently combined with two different kinds of graphene (Graphenea [GN] and LayerOne [LO]) at different mass ratios. The PYT-functionalized GN electrode (PYT/GN 4-5) possesses a high capacity of 711 F g^-1 at 1 A g^-1 in 1 M H₂ SO₄ . To match with the PYT/GN 4-5 cathode, an annealed-Ti₃ C₂ T_x (A-Ti₃ C₂ T_x ) MXene anode with a pseudocapacitive character is prepared by pyrolysis of pure Ti₃ C₂ T_x . The assembled PYT/GN 4-5//A-Ti₃ C₂ T_x ASC delivers an outstanding energy density of 18.4 Wh kg^-1 at a power density of 700 W kg^-1 . The PYT-functionalized graphene holds great potential for high-performance energy storage devices.

Scalable Fabrication of an MXene/Cotton/Spandex Yarn for Intelligent Wearable Applications

Wearable sensors based on MXene have attracted attention, but the large-scale production of MXene-based textile materials is still a huge challenge. Hereby, we report a facile way of incorporating MXene into the traditional yarn manufacturing process by dipping and drying MXene into cotton rovings followed by fabricating an MXene/cotton/spandex yarn (MCSY) using friction spinning. The MXene in the MCSY brings electrical conductivity to the MCSY with well-preserved mechanical properties. Due to its wide sensing range from 408 Pa to 10.2 kPa, the MCSY can be used to monitor human motions in real time, such as writing, walking, and wrist bending. In addition, the MCSY exhibits a stable compression sensing performance even under different strains. Furthermore, the MCSY can be sewn into clothing or onto a mask as an embroidery pattern to develop sensing device prototypes capable of detecting touching or breathing. The reported manufacturing technology of the MCSY will lead to an industrial-scale development of MXene-based e-textiles for wearable applications.

Soft Fiber Electronics Based on Semiconducting Polymer

Fibers, originating from nature and mastered by human, have woven their way throughout the entire history of human civilization. Recent developments in semiconducting polymer materials have further endowed fibers and textiles with various electronic functions, which are attractive in applications such as information interfacing, personalized medicine, and clean energy. Owing to their ability to be easily integrated into daily life, soft fiber electronics based on semiconducting polymers have gained popularity recently for wearable and implantable applications. Herein, we present a review of the previous and current progress in semiconducting polymer-based fiber electronics, particularly focusing on smart-wearable and implantable areas. First, we provide a brief overview of semiconducting polymers from the viewpoint of materials based on the basic concepts and functionality requirements of different devices. Then we analyze the existing applications and associated devices such as information interfaces, healthcare and medicine, and energy conversion and storage. The working principle and performance of semiconducting polymer-based fiber devices are summarized. Furthermore, we focus on the fabrication techniques of fiber devices. Based on the continuous fabrication of one-dimensional fiber and yarn, we introduce two- and three-dimensional fabric fabricating methods. Finally, we review challenges and relevant perspectives and potential solutions to address the related problems.

Functional Fiber Materials to Smart Fiber Devices

The development of fiber materials has accompanied the evolution of human civilization for centuries. Recent advances in materials science and chemistry offered fibers new applications with various functions, including energy harvesting, energy storing, displaying, health monitoring and treating, and computing. The unique one-dimensional shape of fiber devices endows them advantages to work as human-interfaced electronics due to the small size, lightweight, flexibility, and feasibility for integration into large-scale textile systems. In this review, we first present a discussion of the basics of fiber materials and the design principles of fiber devices, followed by a comprehensive analysis on recently developed fiber devices. Finally, we provide the current challenges facing this field and give an outlook on future research directions. With novel fiber devices and new applications continuing to be discovered after two decades of research, we envision that new fiber devices could have an important impact on our life in the near future.

Molecular Modification of Lignin-Based Carbon Materials: Influence of Supramolecular Bonds on the Properties

For the application of lignin-based materials, it is necessary to develop simple and efficient chemical modification strategies for lignin. In this work, the iodization modification strategy is selected to improve the specific surface area and graphitization degree of lignin-based carbon fibers. The introduction of an iodine atom can effectively increase the π electron cloud density of the lignin aromatic hydrocarbon structure. High π electron cloud density can effectively enhance the π-π interaction force between lignin molecules (the supramolecular bonds). The biomass precursors with this intermolecular microstructure exhibit good thermal stability and can maintain the original fibrous morphology during high-temperature treatment, which is beneficial for increasing the specific surface area of biomass-based carbon materials. Furthermore, this intermolecular microstructure also contributes to the graphitization of biomass precursor materials and reduces the spacing of graphite micro-lamellae. The obtained lignin-based carbon fibers with iodization modification exhibit a specific capacitance of 333 F/g at a current density of 1 A/g in the three-electrode tests in 6 M KOH solution. As the assembled supercapacitor, the specific capacitance of lignin-based carbon fibers reaches 87 F/g in 1 M Na₂SO₄ solution. Compared to other modification processes for raw materials, this strategy is simple and efficient and has reference value for the synthesis of other high-performance biomass-based materials.

Stretchable One-Dimensional Conductors for Wearable Applications

Continuous, one-dimensional (1D) stretchable conductors have attracted significant attention for the development of wearables and soft-matter electronics. Through the use of advanced spinning, printing, and textile technologies, 1D stretchable conductors in the forms of fibers, wires, and yarns can be designed and engineered to meet the demanding requirements for different wearable applications. Several crucial parameters, such as microarchitecture, conductivity, stretchability, and scalability, play essential roles in designing and developing wearable devices and intelligent textiles. Methodologies and fabrication processes have successfully realized 1D conductors that are highly conductive, strong, lightweight, stretchable, and conformable and can be readily integrated with common fabrics and soft matter. This review summarizes the latest advances in continuous, 1D stretchable conductors and emphasizes recent developments in materials, methodologies, fabrication processes, and strategies geared toward applications in electrical interconnects, mechanical sensors, actuators, and heaters. This review classifies 1D conductors into three categories on the basis of their electrical responses: (1) rigid 1D conductors, (2) piezoresistive 1D conductors, and (3) resistance-stable 1D conductors. This review also evaluates the present challenges in these areas and presents perspectives for improving the performance of stretchable 1D conductors for wearable textile and flexible electronic applications.

Smart Electronic Textile-Based Wearable Supercapacitors

Electronic textiles (e-textiles) have drawn significant attention from the scientific and engineering community as lightweight and comfortable next-generation wearable devices due to their ability to interface with the human body, and continuously monitor, collect, and communicate various physiological parameters. However, one of the major challenges for the commercialization and further growth of e-textiles is the lack of compatible power supply units. Thin and flexible supercapacitors (SCs), among various energy storage systems, are gaining consideration due to their salient features including excellent lifetime, lightweight, and high-power density. Textile-based SCs are thus an exciting energy storage solution to power smart gadgets integrated into clothing. Here, materials, fabrications, and characterization strategies for textile-based SCs are reviewed. The recent progress of textile-based SCs is then summarized in terms of their electrochemical performances, followed by the discussion on key parameters for their wearable electronics applications, including washability, flexibility, and scalability. Finally, the perspectives on their research and technological prospects to facilitate an essential step towards moving from laboratory-based flexible and wearable SCs to industrial-scale mass production are presented.

Femtosecond Laser Bessel Beam Fabrication of a Supercapacitor with a Nanoscale Electrode Gap for High Specific Volumetric Capacitance

Supercapacitors are widely used in electronic systems as energy storage devices. The fabrication of a miniaturized supercapacitor with high specific capacitance has attracted much attention in recent years. Here, we propose a new method to fabricate supercapacitors with a nanoscale electrode gap by using a femtosecond laser. The original femtosecond laser was converted to a nondiffraction Bessel light field with nanoscale beam width and microscale focal depth. Nanoscale processing precision was achieved by regulating the Bessel beam. We fabricated graphene supercapacitors with different electrode gap widths (varying from the microscale to the nanoscale) using this method. Supercapacitors fabricated by this method have advantages in both size miniaturization (electrode gap width down to ∼500 nm) and electrochemical performance improvement (a specific volumetric capacitance of 195 F/cm³). This work demonstrates that the femtosecond laser Bessel beam processing method provides a reliable pathway to fabricate miniaturized supercapacitors with high specific capacitance and other nanoscale electronic devices.

C. D, Karki B, Samatha K, Kim AA, Park M, Pant B. Advancements in MXene-Polymer Nanocomposites in Energy Storage and Biomedical Applications

MXenes are 2D ceramic materials, especially carbides, nitrides, and carbonitrides derived from their parent ‘MAX’ phases by the etching out of ‘A’ and are famous due to their conducting, hydrophilic, biocompatible, and tunable properties. However, they are hardly stable in the outer environment, have low biodegradability, and have difficulty in drug release, etc., which are overcome by MXene/Polymer nanocomposites. The MXenes terminations on MXene transferred to the polymer after composite formation makes it more functional. With this, there is an increment in photothermal conversion efficiency for cancer therapy, higher antibacterial activity, biosensors, selectivity, bone regeneration, etc. The hydrophilic surfaces become conducting in the metallic range after the composite formation. MXenes can effectively be mixed with other materials like ceramics, metals, and polymers in the form of nanocomposites to get improved properties suitable for advanced applications. In this paper, we review different properties like electrical and mechanical, including capacitances, dielectric losses, etc., of nanocomposites more than those like Ti₃C₂T_x/polymer, Ti₃C₂/UHMWPE, MXene/PVA-KOH, Ti₃C₂T_x/PVA, etc. along with their applications mainly in energy storing and biomedical fields. Further, we have tried to enlist the MXene-based nanocomposites and compare them with conducting polymers and other nanocomposites. The performance under the NIR absorption seems more effective. The MXene-based nanocomposites are more significant in most cases than other nanocomposites for the antimicrobial agent, anticancer activity, drug delivery, bio-imaging, biosensors, micro-supercapacitors, etc. The limitations of the nanocomposites, along with possible solutions, are mentioned.

Ultra-compact MXene fibers by continuous and controllable synergy of interfacial interactions and thermal drawing-induced stresses

Recent advances in MXene (Ti₃C₂T_x) fibers, prepared from electrically conductive and mechanically strong MXene nanosheets, address the increasing demand of emerging yet promising electrode materials for the development of textile-based devices and beyond. However, to reveal the full potential of MXene fibers, reaching a balance between electrical conductivity and mechanical property is still the fundamental challenge, mainly due to the difficulties to further compact the loose MXene nanosheets. In this work, we demonstrate a continuous and controllable route to fabricate ultra-compact MXene fibers with an in-situ generated protective layer via the synergy of interfacial interactions and thermal drawing-induced stresses. The resulting ultra-compact MXene fibers with high orientation and low porosity exhibit not only excellent tensile strength and ultra-high toughness, but also high electrical conductivity. Then, we construct meter-scale MXene textiles using these ultra-compact fibers to achieve high-performance electromagnetic interference shielding and personal thermal management, accompanied by the high mechanical durability and stability even after multiple washing cycles. The demonstrated generic strategy can be applied to a broad range of nanostructured materials to construct functional fibers for large-scale applications in both space and daily lives.

Two-Dimensional Hybrid Nanosheet-Based Supercapacitors: From Building Block Architecture, Fiber Assembly, and Fabric Construction to Wearable Applications

Fiber-based supercapacitors (F-SCs) have inspired widespread interest in the fields of wearable technology, energy, and carbon neutralization due to their highly deformable flexibility, fast charging/discharging capability, long-term stability, and energy conservation ability. In this review, we summarize the latest developments for fabricating fibrous electrodes of F-SCs where advanced micro two-dimensional (2D) building blocks (e.g., MXene and graphene) are chemically assembled and constructed into ordered mesofibers and multifunctional macrofabrics. Diverse fundamental principles of 2D hybrid nanosheets with respect to surface controls, pseudocapacitive modifications, and microstructural manipulations, promoting rapid electron transfer and charge conduction, are introduced. Additionally, various spinning methods for assembling and fabricating sophisticated fibers with advanced nano/microstructures, including hierarchical skeletons, anisotropic backbones, surface/entire porous frameworks, and vertical-aligned networks, for boosting ionic kinetic transport/storage are presented. Likewise, the structure-activity relationships between the porous structure and electrochemical performance are clarified. Moreover, multifunctional fabrics in terms of high flexibilities/strengths, superior electrical conductivities, and stabilized operations, which realize large energy density, deformable capability, and robust stability under harsh conditions, are emphasized. In particular, the potential power-supply applications, including flexible electronic devices, self-powered functions, and energy-sensor systems, are highlighted. Finally, a short conclusion and outlook, along with the current challenges and future opportunities of next-generation F-SCs, are proposed.

Ascorbic acid-induced fiber-scrolling of titanium carbide Ti3C2T x MXene

Changing the morphology of two-dimensional materials often offers an efficient and effective means to exploit their electronic and mechanical properties. Two-dimensional materials such as graphene can be scrolled into one-dimensional fibers via simple sonication. Unfortunately, scrolling MXene nanosheets into fibers is quite challenging, especially Ti₃C₂T _x composed of three layers of titanium atoms and two layers of carbon atoms. Herein, we report a new method to fabricate MXene fibers via ascorbic acid (AA) induced scrolling of Ti₃C₂T _x nanosheets. An unusual AA-Ti₃C₂T _x interaction is discovered in that intercalated AA molecules bind to and interact with the Ti₃C₂T _x surface in the form of a hydrogen bonding-bonded assembly instead of as individual molecules, and a sheet-scrolling mechanism is proposed based on this interaction. The as-obtained MXene fibers exhibit a compact cross-section, and the diameter can be tailored from hundreds of nanometers to several micrometers through tuning the MXene/AA ratio. Moreover, the storage modulus of the MXene-fiber sponge attains its maximum value of ∼1 MPa when a unique morphology comprising both fibers and not-yet-scrolled sheets is presented. This work offers a new strategy of fiber-shaping MXenes for applications in structural composites and flexible electronics.

Construction of hierarchical polypyrrole coated copper-catecholate grown on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) fibers for high-performance supercapacitors

Fiber-shaped supercapacitors (FSCs) are considered as the optimal candidate for wearable energy devices, due to their high safety, excellent electrochemical stability, workability and body adaptability. However, the specific capacitances of today's FSCs such as carbon nanotube fibers and graphene fibers, are still not high enough for practical applications due to the limitation of their energy storage mode. So, we design a ternary composite fiber-shaped electrode: First, a kind of metal organic framework (MOF), copper-catecholate (Cu-CAT) nanorods, are in-situ grown on a wet-spun poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) fiber at the ambient temperature. Second, polypyrrole (PPy) is electrodeposited on the surface of the Cu-CAT/PEDOT:PSS fiber to obtain PPy@Cu-CAT@PEDOT:PSS fiber (PPy@Cu-CAT@PF). The growing Cu-CAT with high porosity anchored on the fiber surface provides electrochemical activate sites and the encapsulation of PPy effectively provides a continuous charge transfer path and improve its cycling stability. Notably, the PPy@Cu-CAT@PF electrode exhibits a satisfactory areal capacitance of 669.93 mF cm^-2 at 2 mA cm^-2, which remains 61.66% even at a high current density of 20 mA cm^-2. Furthermore, the assembled symmetric FSC displays excellent electrochemical properties and outstanding mechanical flexibility, demonstrating its feasibility as a wearable supercapacitor.

The Emergence of 2D MXenes Based Zn-Ion Batteries: Recent Development and Prospects

Rechargeable zinc-ion batteries (ZIBs) with exceptional theoretical capacity have garnered significant interest in large-scale electrochemical energy storage devices due to their low cost, abundant material, inherent safety, high specific energy, and ecofriendly nature. Metal carbides/nitrides, known as MXenes, have emerged as a large family of 2D transition metal carbides or carbonitrides with excellent properties, e.g., high electrical conductivity, large surface functional groups (e.g., F, O, and OH), low energy barriers for the diffusion of electrolyte ions with wide interlayer spaces. After a decade of effort, significant development has been achieved in the synthesis, properties, and applications of MXenes. Thus, it has opened up various exciting opportunities to construct advanced MXene-based nanostructures for ZIBs with excellent specific energy and power. Herein, this review summarizes the advances across multiple synthesis routes, related properties, morphological and structural characteristics, and chemistries of MXenes for ZIBs. The recent development of MXene-based electrodes is introduced, and electrolytes for ZIBs are elucidated in detail. MXene-based rocking chair ZIBs, strategies to enhance the performance of MXene-based cathodes, suppress the dendrites in MXene-based anodes, and MXene-based flexible ZIBs are pointed out. A rational design and modification of the MXenes as well as the production of composites with metal oxides exhibits promise in solving issues and enhancing the electrochemical performance of ZIBs. Finally, the present challenges and future prospects for MXene-based ZIBs are discussed.

Understanding the Effect of Pore Size on Electrochemical Capacitive Performance of MXene Foams

Wearable electronics demand energy storage devices with high energy density and fast charging-discharging rates. Although various porous electrodes have been constructed, the effect of pore size on the capacitive performance of 2D nanomaterials has been rarely studied. Herein, flexible MXene foams with significantly different pore structures are fabricated using varying diameter polystyrene (PS) spheres (80, 310, and 570 nm), which shows uniform pores and interconnected pores providing enough active sites and a good electrical connection for electron transfer. Noteworthy, when MXene flakes and templates (310 nm) have a similar size, the foam delivers the highest gravimetric capacitance of 474 ± 12 F g^-1 at 2 mV s^-1 than others. Additionally, the mass ratio between MXene and PS controls the packing density of foams influencing the inner resistance of foam electrodes. A carbon nanotube is introduced to further improve the electrical conductivity of foams to achieve a capacitance of 462 ± 8 F g^-1 at 2 mV s^-1 and retains 205 ± 10 F g^-1 at 1000 mV s^-1 , demonstrating promises in energy storage applications and providing an insightful guidance for designing 2D nanomaterials-based porous electrodes for supercapacitors.

Sophisticated Structural Tuning of NiMoO4@MnCo2O4 Nanomaterials for High Performance Hybrid Capacitors

NiMoO₄ is an excellent candidate for supercapacitor electrodes, but poor cycle life, low electrical conductivity, and small practical capacitance limit its further development. Therefore, in this paper, we fabricate NiMoO₄@MnCo₂O₄ composites based on a two-step hydrothermal method. As a supercapacitor electrode, the sample can reach 3000 mF/cm² at 1 mA/cm². The asymmetric supercapacitor (ASC), NiMoO₄@MnCo₂O₄//AC, can be constructed with activated carbon (AC) as the negative electrode, the device can reach a maximum energy density of 90.89 mWh/cm³ at a power density of 3726.7 mW/cm³ and the capacitance retention can achieve 78.4% after 10,000 cycles.

Environmentally stable MXene ink for direct writing flexible electronics

MXene inks are promising candidates for fabricating conductive circuits and flexible devices. Here, MXene inks prepared from solvent mixtures demonstrate long-term stability and can be employed in commercial rollerball pens to write electronic circuits on flexible substrates. Such circuits exhibit a fast and accurate capacitive response for touch-boards and water level measurement, indicating the excellent potential of these MXene inks in electrical device fabrication.

Ultralow-Voltage-Drivable Artificial Muscles Based on a 3D Structure MXene-PEDOT:PSS/AgNWs Electrode

The main challenge in manufacturing an ionic actuator of large bending displacement and great response sensitivity is to design a flexible electrode with great electrochemical characteristics and conductivity. This research reports the MXene-PEDOT:PSS/AgNWs (MPA) electrode with a three-dimensional (3D) network structure formed by a hybrid method of the one-dimensional (1D) silver nanowires (AgNWs) and the two-dimensional (2D) Ti₃C₂T_x MXene. Here, a soft actuator based on the ionic cross-linked hybrid electrode was designed. The results show that the MPA electrode-based soft actuator achieves a large bending strain (0.48%, ±0.5 V sine voltage), wide frequency (0.1-10 Hz), 5 h durability (91.9% retention), fast response time (≈5 s), great power density (7.53 kW m^-3), and great energy density (18.83 kJ m^-3). These excellent performances contribute to the 3D structure of electrodes formed by MXene and AgNWs creating an unhindered ion channel, which facilitates short diffusion and rapid injection of ions and provides higher capacitance and mechanical integrity. This 3D network layered structure hybrid electrode provides an opportunity for the development of ultralow-voltage-drivable artificial muscles.

Super-Tough and Environmentally Stable Aramid. Nanofiber@MXene Coaxial Fibers with Outstanding Electromagnetic Interference Shielding Efficiency

Although electrically conductive and hydrophilic MXene sheets are promising for multifunctional fibers and electronic textiles, it is still a challenge to simultaneously enhance both conductivity and mechanical properties of MXene fibers because of the high rigidity of MXene sheets and insufficient inter-sheet interactions. Herein, we demonstrate a core-shell wet-spinning methodology for fabricating highly conductive, super-tough, ultra-strong, and environmentally stable Ti₃C₂T_x MXene-based core-shell fibers with conductive MXene cores and tough aramid nanofiber (ANF) shells. The highly orientated and low-defect structure endows the ANF@MXene core-shell fiber with super-toughness of ~ 48.1 MJ m^-3, high strength of ~ 502.9 MPa, and high conductivity of ~ 3.0 × 10⁵ S m^-1. The super-tough and conductive ANF@MXene fibers can be woven into textiles, exhibiting an excellent electromagnetic interference (EMI) shielding efficiency of 83.4 dB at a small thickness of 213 μm. Importantly, the protection of the ANF shells provides the fibers with satisfactory cyclic stability under dynamic stretching and bending, and excellent resistance to acid, alkali, seawater, cryogenic and high temperatures, and fire. The oxidation resistance of the fibers is demonstrated by their well-maintained EMI shielding performances. The multifunctional core-shell fibers would be highly promising in the fields of EMI shielding textiles, wearable electronics and aerospace.

Microfluidic Fabrication of Hierarchical-Ordered ZIF-L(Zn)@Ti3 C2 Tx Core-Sheath Fibers for High-Performance Asymmetric Supercapacitors

We report hierarchical-ordered ZIF-L(Zn)@Ti₃ C₂ T_x MXene core-sheath fibers, in which a ZIF-L(Zn) nanowall array sheath is grown vertically on an anisotropic Ti₃ C₂ T_x core by Ti-O-Zn/Ti-F-Zn chemical bonds. Through highly efficient microfluidic assembly and microchannel reactions, ZIF-L(Zn)@Ti₃ C₂ T_x exhibits well-developed micro-/mesoporosity, ordered ionic pathways, fast interfacial electron conduction and large-scale fabrication, significantly boosting charges dynamic transport and intercalation. The resultant ZIF-L(Zn)@Ti₃ C₂ T_x fiber presents large capacitance (1700 F cm^-3 ) and outstanding rate performance in a 1 M H₂ SO₄ electrolyte. Additionally, ZIF-L(Zn)@Ti₃ C₂ T_x fiber-based solid-state asymmetric supercapacitors deliver high energy density (19.0 mWh cm^-3 ), excellent capacitance (854 F cm^-3 ), large deformable/wearable capabilities and long-time cyclic stability (20 000 cycles), which realize natural sunlight-induced self-powered applications to drive water level/earthquake alarm devices.

High-Performance Coaxial Asymmetry Fibrous Supercapacitors with a Poly(vinyl alcohol)-Montmorillonite Separator

Fibrous supercapacitors have garnered great interest from researchers because of their large electrode/electrolyte interface area, short ion transport path, and high flexibility. However, obtaining a thin gel electrolyte interlayer with a high ion transport rate and uniform thickness is still challenging. Here, we proposed an efficient wet-spinning technique to fabricate uniform polyvinyl-montmorillonite tubular layers for the preparation of a high-performance coaxial asymmetry fibrous supercapacitor (AFSC). The coaxial AFSC shows ultrahigh energy densities in the range of 2.86-4.04 μW h cm^-2 at power densities of 0.16-1.61 mW cm^-2 while maintaining a long cycling life (94% retention even after 20 000 cycles). After charging at a constant voltage of 2.4 V for 30 s, the flexible watchband which is composed of three series-connected AFSCs could power a commercial electronic watch for more than 2 min. This work provides a universal strategy to fabricate high-performance and wearable energy storage devices.

Scalable Fabrication of Ti3C2Tx MXene/RGO/Carbon Hybrid Aerogel for Organics Absorption and Energy Conversion

High aspect ratio two-dimensional Ti₃C₂T_x MXene flakes with extraordinary mechanical, electrical, and thermal properties are ideal candidates for assembling elastic and conductive aerogels. However, the scalable fabrication of large MXene-based aerogels remains a challenge because the traditional preparation method relies on supercritical drying techniques such as freeze drying, resulting in poor scalability and high cost. Herein, the use of porous melamine foam as a robust template for MXene/reduced graphene oxide aerogel circumvents the volume shrinkage during its natural drying process. Through this approach, we were able to produce large size (up to 600 cm³) MXene-based aerogel with controllable shape. In addition, the aerogels possess an interconnected cellular structure and display resilience up to 70% of compressive strain. Some key features also include high solvent absorption capacity (∼50-90 g g^-1), good photothermal conversion ability (an average evaporation rate of 1.48 kg m^-2 h^-1 for steam generation), and an excellent electrothermal conversion rate (1.8 kg m^-2 h^-1 at 1 V). More importantly, this passive drying process provides a scalable, convenient, and cost-effective approach to produce high-performance MXene-based aerogels, demonstrating the feasibility of commercial production of MXene-based aerogels toward practical applications.

Organic/Inorganic Hybrid Fibers: Controllable Architectures for Electrochemical Energy Applications

Organic/inorganic hybrid fibers (OIHFs) are intriguing materials, possessing an intrinsic high specific surface area and flexibility coupled to unique anisotropic properties, diverse chemical compositions, and controllable hybrid architectures. During the last decade, advanced OIHFs with exceptional properties for electrochemical energy applications, including possessing interconnected networks, abundant active sites, and short ion diffusion length have emerged. Here, a comprehensive overview of the controllable architectures and electrochemical energy applications of OIHFs is presented. After a brief introduction, the controllable construction of OIHFs is described in detail through precise tailoring of the overall, interior, and interface structures. Additionally, several important electrochemical energy applications including rechargeable batteries (lithium-ion batteries, sodium-ion batteries, and lithium-sulfur batteries), supercapacitors (sandwich-shaped supercapacitors and fiber-shaped supercapacitors), and electrocatalysts (oxygen reduction reaction, oxygen evolution reaction, and hydrogen evolution reaction) are presented. The current state of the field and challenges are discussed, and a vision of the future directions to exploit OIHFs for electrochemical energy devices is provided.