Performance of different Dixon-based methods for MR liver iron assessment in comparison to a biopsy-validated R2* relaxometry method

Application of the magnetic resonance 3D multiecho Dixon sequence for quantifying hepatic iron overload and steatosis in patients with thalassemia

OBJECTIVE

To investigate the feasibility and diagnostic efficacy of a 3D multiecho Dixon (qDixon) research application for simultaneously quantifying the liver iron concentration (LIC) and steatosis in thalassemia patients.

MATERIALS AND METHODS

This prospective study enrolled participants with thalassemia who underwent 3 T MRI of the liver for the evaluation of hepatic iron overload. The imaging protocol including qDixon and conventional T2* mapping based on 2D multiecho gradient echo (ME GRE) sequences respectively. Regions of interest (ROIs) were drawn in the liver on the qDixon maps to obtain R2* and proton density fat fraction (PDFF). The reference R2* value was measured and calculated on conventional T2* mapping using the CMRtools software. Correlation analysis, Linear regression analysis, and Bland-Altman analysis were performed.

RESULTS

84 patients were finally included in this study. The median R2*-ME-GRE was 366.97 (1/s), range [206.68 (1/s), 522.20 (1/s)]. 8 patients had normal hepatic iron deposition, 16 had Insignificant, 42 had mild, 18 had moderate. The median of R2*-qDixon was 376.88 (1/s) [219.33 (1/s), 491.75 (1/s)]. A strong correlation was found between the liver R2*-qDixon and the R2*-ME-GRE (r = 0.959, P < 0.001). The median value of PDFF was 1.76% (1.10%, 2.95%). 8 patients had mild fatty liver, and 1 had severe fatty liver.

CONCLUSION

MR qDixon research sequence can rapidly and accurately quantify liver iron overload, that highly consistent with the measured via conventional GRE sequence, and it can also simultaneously detect hepatic steatosis, this has great potential for clinical evaluation of thalassemia patients.

Genetic Determined Iron Starvation Signature in Friedreich's Ataxia

BACKGROUND

Early studies in cellular models suggested an iron accumulation in Friedreich's ataxia (FA), yet findings from patients are lacking.

OBJECTIVES

The objective is to characterize systemic iron metabolism, body iron storages, and intracellular iron regulation in FA patients.

METHODS

In FA patients and matched healthy controls, we assessed serum iron parameters, regulatory hormones as well as the expression of regulatory proteins and iron distribution in peripheral blood mononuclear cells (PBMCs). We applied magnetic resonance imaging with R2*-relaxometry to quantify iron storages in the liver, spleen, and pancreas. Across all evaluations, we assessed the influence of the genetic severity as expressed by the length of the shorter GAA-expansion (GAA1).

RESULTS

We recruited 40 FA patients (19 women). Compared to controls, FA patients displayed lower serum iron and transferrin saturation. Serum ferritin, hepcidin, mean corpuscular hemoglobin and mean corpuscular volume in FA inversely correlated with the GAA1-repeat length, indicating iron deficiency and restricted availability for erythropoiesis with increasing genetic severity. R2*-relaxometry revealed a reduction of splenic and hepatic iron stores in FA. Liver and spleen R2* values inversely correlated with the GAA1-repeat length. FA PBMCs displayed downregulation of ferritin and upregulation of transferrin receptor and divalent metal transporter-1 mRNA, particularly in patients with >500 GAA1-repeats. In FA PBMCs, intracellular iron was not increased, but shifted toward mitochondria.

CONCLUSIONS

We provide evidence for a previously unrecognized iron starvation signature at systemic and cellular levels in FA patients, which is related to the underlying genetic severity. These findings challenge the use of systemic iron lowering therapies in FA. © 2024 The Authors. Movement Disorders published by Wiley Periodicals LLC on behalf of International Parkinson and Movement Disorder Society.

Non-invasive mapping of brown adipose tissue activity with magnetic resonance imaging

Thermogenic brown adipose tissue (BAT) has a positive impact on whole-body metabolism. However, in vivo mapping of BAT activity typically relies on techniques involving ionizing radiation, such as [18F]fluorodeoxyglucose ([18F]FDG) positron emission tomography (PET) and computed tomography (CT). Here we report a noninvasive metabolic magnetic resonance imaging (MRI) approach based on creatine chemical exchange saturation transfer (Cr-CEST) contrast to assess in vivo BAT activity in rodents and humans. In male rats, a single dose of the β3-adrenoceptor agonist (CL 316,243) or norepinephrine, as well as cold exposure, triggered a robust elevation of the Cr-CEST MRI signal, which was consistent with the [18F]FDG PET and CT data and 1H nuclear magnetic resonance measurements of creatine concentration in BAT. We further show that Cr-CEST MRI detects cold-stimulated BAT activation in humans (both males and females) using a 3T clinical scanner, with data-matching results from [18F]FDG PET and CT measurements. This study establishes Cr-CEST MRI as a promising noninvasive and radiation-free approach for in vivo mapping of BAT activity.

Can Automated 3-Dimensional Dixon-Based Methods Be Used in Patients With Liver Iron Overload?

PURPOSE

Accurate quantification of liver iron concentration (LIC) can be achieved via magnetic resonance imaging (MRI). Maps of liver T2*/R2* are provided by commercially available, vendor-provided, 3-dimensional (3D) multiecho Dixon sequences and allow automated, inline postprocessing, which removes the need for manual curve fitting associated with conventional 2-dimensional (2D) gradient echo (GRE)-based postprocessing. The main goal of our study was to investigate the relationship among LIC estimates generated by 3D multiecho Dixon sequence to values generated by 2D GRE-based R2* relaxometry as the reference standard.

METHODS

A retrospective review of patients who had undergone MRI scans for estimation of LIC with conventional T2* relaxometry and 3D multiecho Dixon sequences was performed. A 1.5 T scanner was used to acquire the magnetic resonance studies. Acquisition of standard multislice multiecho T2*-based sequences was performed, and R2* values with corresponding LIC were estimated. The comparison between R2* and corresponding LIC estimates obtained by the 2 methods was analyzed via the correlation coefficients and Bland-Altman difference plots.

RESULTS

This study included 104 patients (51 male and 53 female patients) with 158 MRI scans. The mean age of the patients at the time of scan was 15.2 (SD, 8.8) years. There was a very strong correlation between the 2 LIC estimation methods for LIC values up to 3.2 mg/g (LIC quantitative multiecho Dixon [qDixon; from region of interest R2*] vs LIC GRE [in-house]: r = 0.83, P < 0.01; LIC qDixon [from segmentation volume R2*] vs LIC GRE [in-house]: r = 0.92, P < 0.01); and very weak correlation between the 2 methods at liver iron levels >7 mg/g.

CONCLUSION

Three-dimensional-based multiecho Dixon technique can accurately measure LIC up to 7 mg/g and has the potential to replace 2D GRE-based relaxometry methods.

The application of quantitative perfusion analysis of golden-angle radial sparse parallel MRI and R2∗ value for predicting pathological prognostic factors in rectal cancer

AIM

To investigate the diagnostic value of golden-angle radial sparse parallel magnetic resonance imaging (MRI) (GRASP) and R2∗ in predicting the prognostic factors of resectable rectal cancer.

MATERIALS AND METHODS

A total of 108 patients with rectal adenocarcinoma were included in this retrospective study. The volume transfer constant (Ktrans), rate constant (Kep), plasma volume fraction (Ve), and R2∗ were obtained. Univariate and multivariate logistic regression were conducted. Receiver operating characteristic (ROC) curve analysis was performed to evaluate the diagnostic performance of the imaging parameters.

RESULTS

The Ktrans was found to be significantly higher in rectal cancers with positive lymph node metastasis (LNM), higher tumour grade, positive lymphovascular invasion (LVI), and higher ki-67 (all p<0.05). The Kep was also significantly higher in the LNM-positive group (p<0.001), while the R2∗ was higher in rectal cancers with LNM-positive, higher tumour grade, LVI-positive, and higher ki-67 (all p<0.05). Combining the Ktrans and R2∗ provided the highest area under the ROC curve (AUC) for LNM-positive and higher ki-67 tumours differentiation (0.790 and 0.823, respectively).

DISCUSSION

Combining quantitative parameters of the Ktrans and R2∗ could be used to non-invasively predict pathological prognostic factors preoperatively.

Simulation of Image-Guided Microwave Ablation Therapy Using a Digital Twin Computational Model

Emerging computational tools such as healthcare digital twin modeling are enabling the creation of patient-specific surgical planning, including microwave ablation to treat primary and secondary liver cancers. Healthcare digital twins (DTs) are anatomically one-to-one biophysical models constructed from structural, functional, and biomarker-based imaging data to simulate patient-specific therapies and guide clinical decision-making. In microwave ablation (MWA), tissue-specific factors including tissue perfusion, hepatic steatosis, and fibrosis affect therapeutic extent, but current thermal dosing guidelines do not account for these parameters. This study establishes an MR imaging framework to construct three-dimensional biophysical digital twins to predict ablation delivery in livers with 5 levels of fat content in the presence of a tumor. Four microwave antenna placement strategies were considered, and simulated microwave ablations were then performed using 915 MHz and 2450 MHz antennae in Tumor Naïve DTs (control), and Tumor Informed DTs at five grades of steatosis. Across the range of fatty liver steatosis grades, fat content was found to significantly increase ablation volumes by approximately 29-l42% in the Tumor Naïve and 55-60% in the Tumor Informed DTs in 915 MHz and 2450 MHz antenna simulations. The presence of tumor did not significantly affect ablation volumes within the same steatosis grade in 915 MHz simulations, but did significantly increase ablation volumes within mild-, moderate-, and high-fat steatosis grades in 2450 MHz simulations. An analysis of signed distance to agreement for placement strategies suggests that accounting for patient-specific tumor tissue properties significantly impacts ablation forecasting for the preoperative evaluation of ablation zone coverage.

Magnetic resonance imaging assessment of the changes of cardiac and hepatic iron load in thalassemia patients before and after hematopoietic stem cell transplantation

To investigate the value of T2* technique on 3.0 T magnetic resonance imaging (MRI) in evaluating the changes of cardiac and hepatic iron load before and after hematopoietic stem cell transplantation (HSCT) in patients with thalassemia (TM), the 141 TM patients were divided into 6 group for subgroup analysis: 6, 12, 18, 24 and > 24 months group, according to the postoperative interval. The T2* values of heart and liver (H-T2*, L-T2*) were quantified in TM patients before and after HSCT using 3.0 T MRI T2* technology, and the corresponding serum ferritin (SF) was collected at the same time, and the changes of the three before and after HSCT were compared. The overall H-T2* (P = 0.001) and L-T2* (P = 0.041) of patients after HSCT were higher than those before HSCT (mean relative changes = 19.63%, 7.19%). The H-T2* (P < 0.001) and L-T2* (P < 0.001) > 24 months after HSCT were significantly higher than those before HSCT (mean relative changes = 69.19%, 93.73%). The SF of 6 months (P < 0.001), 12 months (P = 0.008), 18 months (P = 0.002) and > 24 months (P = 0.001) were significantly higher than those before HSCT (mean relative changes = 57.93%, 73.84%, 128.51%, 85.47%). There was no significant improvement in cardiac and liver iron content in TM patients within 24 months after HSCT, while the reduction of cardiac and liver iron content in patients is obvious when > 24 months after HSCT.

MRI Assessment of Renal Lipid Deposition and Abnormal Oxygen Metabolism of Type 2 diabetes Mellitus Based on mDixon-Quant

BACKGROUND

Diabetic nephropathy (DN) is the main cause of end-stage renal failure. Multiecho Dixon-based imaging utilizes chemical shift for water-fat separation that may be valuable in detecting changes both fat and oxygen content of the kidney from a single dataset.

PURPOSE

To investigate whether multiecho Dixon-based imaging can assess fat and oxygen metabolism of the kidney in a single breath-hold acquisition for patients with type 2 diabetes mellitus (DM).

STUDY TYPE

Prospective.

SUBJECTS

A total of 40 DM patients with laboratory examination of biochemical parameters and 20 age- and body mass index (BMI)-matched healthy volunteers (controls).

FIELD STRENGTH/SEQUENCE

3D multiecho Dixon gradient-echo sequence at 3.0 T.

ASSESSMENT

The DM patients were divided into two groups based on urine albumin-to-creatinine ratio (ACR): type 2 diabetes mellitus (DM, 20 patients, ACR < 30 mg/g) and diabetic nephropathy (DN, 20 patients, ACR ≥ 30 mg/g). In all subjects, fat fraction (FF) and relaxation rate (R2*) maps were derived from the Dixon-based imaging dataset, and mean values in manually drawn regions of interest in the cortex and medulla compared among groups. Associations between MRI and biochemical parameters, including β2-microglobulin, were investigated.

STATISTICAL TESTS

Kruskal-Wallis tests, Spearman correlation analysis, and receiver operating characteristic (ROC) curve analysis.

RESULTS

FF and R2* values of the renal cortex and medulla were significantly different among the three groups with control group < DM < DN (FF: control, 1.11± 0.30, 1.10 ± 0.39; DM, 1.52 ± 0.32, 1.57 ± 0.35; DN, 1.99 ± 0.66, 2.21 ± 0.59. R2*: Control, 16.88 ± 0.77, 20.70 ± 0.86; DM, 17.94 ± 0.75, 22.10 ± 1.12; DN, 19.20 ± 1.24, 23.63 ± 1.33). The highest correlation between MRI and biochemical parameters was that between cortex R2* and β2-microglobulin (r = 0.674). A medulla R2* cutoff of 21.41 seconds-1 resulted in a sensitivity of 80%, a specificity of 85% and achieved the largest area under the ROC curve (AUC) of 0.83 for discriminating DM from the controls. A cortex FF of 1.81% resulted in a sensitivity of 80%, a specificity of 100% and achieved the largest AUC of 0.83 for discriminating DM from DN.

DATA CONCLUSION

Multiecho Dixon-based imaging is feasible for noninvasively distinguishing DN, DM and healthy controls by measuring FF and R2* values.

EVIDENCE LEVEL

2.

TECHNICAL EFFICACY

Stage 2.

Intra-examination agreement between multi-echo gradient echo and confounder-corrected chemical shift-encoded MR sequences for R2* estimation as a biomarker of liver iron content in patients with a wide range of T2*/R2* and proton density fat fraction values

PURPOSE

To investigate the intra-examination agreement between multi-echo gradient echo (MEGE) and confounder-corrected chemical shift-encoded (CSE) sequences for liver T2*/R2* estimations in a wide range of T2*/R2* and proton density fat fraction (PDFF) values. Exploratorily, to search for the T2*/R2* value where the agreement line breaks and examine differences between regions of low and high agreement.

METHODS

Consecutive patients at risk for liver iron overload who underwent MEGE and CSE sequences within the same exam at 1.5 T were retrospectively selected. Regions of interest were drawn in the right and one in the left liver lobes on post-processed images for R2*(sec-1) and PDFF (%) estimation. Agreement between MEGE-R2* and CSE-R2* was evaluated using intra-class correlation coefficient (ICC) and Bland-Altman analysis. 95% confidence intervals (CI) were computed. Segment-and-regression analysis was performed to find the point where the agreement between sequences is interrupted. Regions of low and high agreement were examined using tree-based partitioning analyses.

RESULTS

49 patients were included. Mean MEGE-R2* was 94.2 s-1 (range: 31.0-737.1) and mean CSE-R2* 87.7 (29.7-748.1). Mean CSE-PDFF was 9.12% (0.1-43.3). Agreement was strong for R2* estimations (ICC: 0.992,95%CI 0.987,0.996), but the relation was nonlinear and possibly heteroskedastic. Lower agreement occurred when MEGE-R2* > 235 s-1, with MEGE-R2* values consistently lower than CSE-R2*. Higher agreement was observed when PDFF < 14%.

CONCLUSION

MEGE-R2* and CSE-R2* strongly agree, though at higher iron content, MEGE-R2* is consistently lower than CSE-R2*. In this preliminary dataset, a breaking point for agreement was found at R2* > 235. Lower agreement was observed in patients with moderate to severe liver steatosis.

1.5-T MR relaxometry in quantifying splenic and pancreatic iron: retrospective comparison of a commercial 3D-Dixon sequence and an established 2D multi-gradient echo sequence

OBJECTIVES

To compare the quantitative measurement of splenic and pancreatic iron content using a commercial 3D-Dixon sequence (qDixon) versus an established fat-saturated R2* relaxometry method (ME-GRE).

METHODS

We analyzed splenic and pancreatic iron levels in 143 MR examinations (1.5 T) using the qDixon and a ME-GRE sequence (108 patients: 65 males, 43 females, mean age 61.31 years). Splenic and pancreatic R2* values were compared between both methods using Bland-Altman plots, concordance correlation coefficients (CCC), and linear regression analyses. Iron overload (R2* > 50 1/s) was defined for both organs and compared using contingency tables, overall agreement, and Gwet's AC1 coefficient.

RESULTS

Of all analyzable examinations, the median splenic R2* using the qDixon sequence was 25.75 1/s (range: 5.6-433) and for the ME-GRE sequence 35.35 1/s (range: 10.9-400.8) respectively. Concerning the pancreas, a median R2* of 29.93 1/s (range: 14-111.45) for the qDixon and 31.25 1/s (range: 14-97) for the ME-GRE sequence was found. Bland-Altman analysis showed a mean R2* difference of 2.12 1/s with a CCC of 0.934 for the spleen and of 0.29 1/s with a CCC of 0.714 for the pancreas. Linear regression for the spleen/pancreas resulted in a correlation coefficient of 0.94 (p < 0.001)/0.725 (p < 0.001). Concerning iron overload, the proportion of overall agreement between the two methods was 91.43% for the spleen and 93.18% for the pancreas.

CONCLUSIONS

Our data show good concordance between R2* values obtained with a commercial qDixon sequence and a validated ME-GRE relaxometry method. The 3D-qDixon sequence, originally intended for liver assessment, seems to be a reliable tool for non-invasive evaluation of iron content also in the spleen and the pancreas.

KEY POINTS

• A 3D chemical shift imaging sequence and 2D multi-gradient echo sequence show good conformity quantifying splenic and pancreatic R2* values. • The 3D chemical shift imaging sequence allows a reliable analysis also of splenic and pancreatic iron status. • In addition to the liver, the analysis of the spleen and pancreas is often helpful for further differential diagnostic clarification and patient guidance regarding the iron status.

A multicenter study on the quantification of liver iron concentration in thalassemia patients by means of the MRI T2* technique

Objective

To investigate the feasibility and accuracy of quantifying liver iron concentration (LIC) in patients with thalassemia (TM) using 1.5T and 3T T₂^* MRI.

Methods

1.5T MRI T₂^* values were measured in 391 TM patients from three medical centers: the T₂^* values of the test group were combined with the LIC (LIC_F) provided by FerriScan to construct the curve equation. In addition, the liver 3T MRI liver T₂^* data of 55 TM patients were measured as the 3T group: the curve equation of 3T T₂^* value and LIC_F was constructed.

Results

Based on the test group LIC_F (0.6-43 mg/g dw) and the corresponding 1.5T T₂^* value, the equation was LIC_F = 37.393T2*∧(-1.22) (R² = 0.971; P < 0.001). There was no significant difference between LIC_{e - 1.5T} and LIC_F in each validation group (Z = -1.269, -0.977, -1.197; P = 0.204, 0.328, 0.231). There was significant consistency (Kendall's W = 0.991, 0.985, 0.980; all P < 0.001) and high correlation (r_s = 0.983, 0.971, 0.960; all P < 0.001) between the two methods. There was no significant difference between the clinical grading results of LIC_{e - 1.5T} and LIC_F in each validation group (χ² = 3.0, 4.0, 2.0; P = 0.083, 0.135, 0.157), and there was significant consistency between the clinical grading results (Kappa's K = 0.943, 0.891, 0.953; P < 0.001). There was no statistical correlation between the LIC_F (≥14 mg/g dw) and the 3T T₂^* value of severe iron overload (P = 0.085). The LIC_F (2-14 mg/g dw) in mild and moderate iron overload was significantly correlated with the corresponding T₂^* value (r_s = -0.940; P < 0.001). The curve equation constructed from LIC_F and corresponding 3T T₂^* values in this range is LIC_F = 18.463T₂^*∧^(-1.142) (R² = 0.889; P < 0.001). There was no significant difference between LIC_F and LIC_{e - 3T} in the mild to moderate range (Z = -0.523; P = 0.601), and there was a significant correlation (r_s = 0.940; P < 0.001) and significant consistency (Kendall's W = 0.970; P = 0.008) between them. LIC_{e - 3T} had high diagnostic efficiency in the diagnosis of severe, moderate, and mild liver iron overload (specificity = 1.000, 0.909; sensitivity = 0.972, 1.000).

Conclusion

The liver iron concentration can be accurately quantified based on the 1.5T T₂^* value of the liver and the specific LIC-T₂^* curve equation. 3T T₂^* technology can accurately quantify mild-to-moderate LIC, but it is not recommended to use 3T T₂^* technology to quantify higher iron concentrations.

Quantification of cardiac iron in patients with thalassemia with 3-T MRI calibrated by 1.5-T MRI

BACKGROUND

Due to the small sample size of many studies, it remained unclear what standardized reference range the T2* cutoff at 3 T would be used to assess the severity of cardiac iron load. In addition, the number of patients with moderate to severe cardiac iron load was small in some studies, especially the sample of patients with severe cardiac iron load.

PURPOSE

To explore the feasibility, reproducibility, and reliability of using T2* values in quantifying cardiac iron load in patients with thalassemia at 3 T.

MATERIAL AND METHODS

A total of 122 patients with thalassemia underwent cardiac T2* imaging at both 1.5 T and 3 T. Cardiac R2* (1000/T2*) values of the 100 patients at 3 T were fitted against the values at 1.5 T using linear regression and the prediction equation was derived. The remaining 22 cases were used to test the prediction accuracy of the equation.

RESULTS

The combined R2* values exhibited a strong linear relationship between 1.5 T and 3 T (r = 0.830，P<0.001). At the center, it had a slope of 1.348 and an intercept of 37.279. According to the equation, the truncated T2* values of cardiac iron overload and cardiac heavy iron overload at 3 T were <10 ms and <6 ms, respectively. The two truncated T2* values were used to diagnose different levels of cardiac iron overloaded of 22 patients at 3 T; the accuracy rates were 95.5% and 100.0%, respectively.

CONCLUSION

T2* quantification of cardiac iron load at 3 T MRI resulted to be feasible, reproducible, and reliable.

Quantification of Liver Iron Overload with MRI: Review and Guidelines from the ESGAR and SAR

Accumulation of excess iron in the body, or systemic iron overload, results from a variety of causes. The concentration of iron in the liver is linearly related to the total body iron stores and, for this reason, quantification of liver iron concentration (LIC) is widely regarded as the best surrogate to assess total body iron. Historically assessed using biopsy, there is a clear need for noninvasive quantitative imaging biomarkers of LIC. MRI is highly sensitive to the presence of tissue iron and has been increasingly adopted as a noninvasive alternative to biopsy for detection, severity grading, and treatment monitoring in patients with known or suspected iron overload. Multiple MRI strategies have been developed in the past 2 decades, based on both gradient-echo and spin-echo imaging, including signal intensity ratio and relaxometry strategies. However, there is a general lack of consensus regarding the appropriate use of these methods. The overall goal of this article is to summarize the current state of the art in the clinical use of MRI to quantify liver iron content and to assess the overall level of evidence of these various methods. Based on this summary, expert consensus panel recommendations on best practices for MRI-based quantification of liver iron are provided.

α- and β-Genotyping of Thalassemia Patients Based on a Multimodal Liver MRI Radiomics Model: A Preliminary Study in Two Centers

BACKGROUND

So far, there is no non-invasive method that can popularize the genetic testing of thalassemia (TM) patients on a large scale. The purpose of the study was to investigate the value of predicting the α- and β- genotypes of TM patients based on a liver MRI radiomics model.

METHODS

Radiomics features of liver MRI image data and clinical data of 175 TM patients were extracted using Analysis Kinetics (AK) software. The radiomics model with optimal predictive performance was combined with the clinical model to construct a joint model. The predictive performance of the model was evaluated in terms of AUC, accuracy, sensitivity, and specificity.

RESULTS

The T2 model showed the best predictive performance: the AUC, accuracy, sensitivity, and specificity of the validation group were 0.88, 0.865, 0.875, and 0.833, respectively. The joint model constructed from T2 image features and clinical features showed higher predictive performance: the AUC, accuracy, sensitivity, and specificity of the validation group were 0.91, 0.846, 0.9, and 0.667, respectively.

CONCLUSION

The liver MRI radiomics model is feasible and reliable for predicting α- and β-genotypes in TM patients.

Volumetric Evaluation of 3D Multi-Gradient-Echo MRI Data to Assess Whole Liver Iron Distribution by Segmental R2* Analysis: First Experience

PURPOSE

MR transverse relaxation rate R₂* has been shown to be useful for monitoring liver iron overload. A sequence enabling acquisition of the whole liver in a single breath hold is now available, thus allowing volumetric hepatic R₂* distribution studies. We evaluated the feasibility of computer-assisted whole liver segmentation of 3 D multi-gradient-echo MRI data, and compared whole liver R₂* determination to analyzing only a single slice. Also, segmental R₂* differences were studied.

MATERIALS AND METHODS

The liver of 44 patients, investigated by multi-gradient echo MRI at 1.5 T, was segmented and divided into nine segments. Segmental R₂* values were examined for all patients together and with respect to two criteria: average R₂* values, and reason for iron overload. Correlation of single-slice and volumetric data was tested with Spearman's rank test, segmental and group differences were evaluated by analysis of variance.

RESULTS

Whole-liver R₂* values correlated excellent to single slice data (p < 0.001). The lowest R₂* occurred in segment 1 (S1), differences of S1 with regard to other segments were significant in five cases and highly significant in two cases. Patients with high average R₂* showed significant differences between S1 and segments 2, 6, and 7. Disease-related differences with respect to S1 were significant in segments 3 to 5 and 7.

CONCLUSION

Our results suggest inhomogeneous hepatic iron distribution. Low R₂* in S1 may be explained by its special vascularization.

KEY POINTS

· Hepatic R2* distribution is not as homogeneous as previously thought.. · Liver segments might have a functional relevance.. · Segmental and total liver R2* values coincide best in segment 8..

CITATION FORMAT

· Wunderlich AP, Cario H, Kannengießer S et al. Volumetric Evaluation of 3D Multi-Gradient-Echo MRI Data to Assess Whole Liver Iron Distribution by Segmental R2* Analysis: First Experience. Fortschr Röntgenstr 2023; 195: 224 - 233.

Artifact-free fat-water separation in Dixon MRI using deep learning

Chemical-shift encoded MRI (CSE-MRI) is a widely used technique for the study of body composition and metabolic disorders, where derived fat and water signals enable the quantification of adipose tissue and muscle. The UK Biobank is acquiring whole-body Dixon MRI (a specific implementation of CSE-MRI) for over 100,000 participants. Current processing methods associated with large whole-body volumes are time intensive and prone to artifacts during fat-water separation performed by the scanner, making quantitative analysis challenging. The most common artifacts are fat-water swaps, where the labels are inverted at the voxel level. It is common for researchers to discard swapped data (generally around 10%), which is wasteful and may lead to unintended biases. Given the large number of whole-body Dixon MRI acquisitions in the UK Biobank, thousands of swaps are expected to be present in the fat and water volumes from image reconstruction performed on the scanner. If they go undetected, errors will propagate into processes such as organ segmentation, and dilute the results in population-based analyses. There is a clear need for a robust method to accurately separate fat and water volumes in big data collections like the UK Biobank. We formulate fat-water separation as a style transfer problem, where swap-free fat and water volumes are predicted from the acquired Dixon MRI data using a conditional generative adversarial network, and introduce a new loss function for the generator model. Our method is able to predict highly accurate fat and water volumes free from artifacts in the UK Biobank. We show that our model separates fat and water volumes using either single input (in-phase only) or dual input (in-phase and opposed-phase) data, with the latter producing superior results. Our proposed method enables faster and more accurate downstream analysis of body composition from Dixon MRI in population studies by eliminating the need for visual inspection or discarding data due to fat-water swaps.

Supplementary Information

The online version contains supplementary material available at 10.1186/s40537-022-00677-1.

Magnetic resonance spectroscopy for quantification of liver iron deposition in hereditary hemochromatosis of a Chinese family: Four case reports

RATIONALE

Hereditary hemochromatosis (HH) is a major cause of liver iron overload. The gold standard for the diagnosis of liver iron overload is the histopathological analysis of a liver sample collected by biopsy. The biopsy procedure is both invasive and painful and carries some risks of complications. The multi-echo single-voxel magnetic resonance spectroscopy (HISTO) technique can be used for noninvasive, quantitative assessment of liver iron overload.

PATIENT CONCERNS

We report 4 Chinese Han men, who were relatives. Patient A was admitted with diabetes and presented with thrombocytopenia and skin hyperpigmentation. The other patients had no specific clinical presentation.

DIAGNOSES

Patient A was suspected of having iron in the liver on routine magnetic resonance imaging, therefore, further HISTO, laboratory testing, and liver biopsy were performed, which confirmed iron metabolic abnormalities. Furthermore, we identified hepatic iron deposition using HISTO and laboratory testing of his son and 2 brothers. Combined with symptoms, auxiliary examinations, and liver biopsy, HH was considered.

INTERVENTIONS

As the 4 patients had no other discomfort other than patient A who had diabetes, patient A was placed on therapy comprising the insulin pump, acarbose, and platelet booster capsule.

OUTCOMES

After treatment, the diabetic symptoms of patient A improved. The patient and his relatives were regularly followed-up for HH.

LESSONS

HH should be considered when hepatic iron deposition is suspected by routine magnetic resonance, as the HISTO sequence can quantitate liver iron deposition and leads to a promising diagnosis. HISTO is of great value in familial cases, especially in young patients requiring long-term follow-up.

How to select the quantitative magnetic resonance technique for subjects with fatty liver: A systematic review

BACKGROUND

Early quantitative assessment of liver fat content is essential for patients with fatty liver disease. Mounting evidence has shown that magnetic resonance (MR) technique has high accuracy in the quantitative analysis of fatty liver, and is suitable for monitoring the therapeutic effect on fatty liver. However, many packaging methods and postprocessing functions have puzzled radiologists in clinical applications. Therefore, selecting a quantitative MR imaging technique for patients with fatty liver disease remains challenging.

AIM

To provide information for the proper selection of commonly used quantitative MR techniques to quantify fatty liver.

METHODS

We completed a systematic literature review of quantitative MR techniques for detecting fatty liver, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses protocol. Studies were retrieved from PubMed, Embase, and Cochrane Library databases, and their quality was assessed using the Quality Assessment of Diagnostic Studies criteria. The Reference Citation Analysis database (https://www.referencecitationanalysis.com) was used to analyze citation of articles which were included in this review.

RESULTS

Forty studies were included for spectroscopy, two-point Dixon imaging, and multiple-point Dixon imaging comparing liver biopsy to other imaging methods. The advantages and disadvantages of each of the three techniques and their clinical diagnostic performances were analyzed.

CONCLUSION

The proton density fat fraction derived from multiple-point Dixon imaging is a noninvasive method for accurate quantitative measurement of hepatic fat content in the diagnosis and monitoring of fatty liver progression.

Liver iron quantification in children and young adults: comparison of a volumetric multi-echo 3-D Dixon sequence with conventional 2-D T2* relaxometry

BACKGROUND

Magnetic resonance imaging (MRI)-based liver iron quantification is the standard of care to guide chelation therapy in children at risk of hemochromatosis. T2* relaxometry is the most widely used technique but requires third-party software for post-processing. Vendor-provided three-dimensional (3-D) multi-echo Dixon techniques are now available that allow inline/automated post-processing.

OBJECTIVE

The purpose of our study was to evaluate the diagnostic accuracy of a volumetric multi-echo Dixon technique using conventional T2* relaxometry as the reference standard in a pediatric and young adult population.

MATERIALS AND METHODS

In this retrospective study, we queried the radiology information system to identify all MRIs performed for liver iron quantification from July 2015 to January 2020. All patients had undergone T2* relaxometry on a 1.5-tesla (T) scanner for liver iron concentration (LIC) estimation. In addition, a 3-D multi-echo Dixon was performed using Siemens Healthineers LiverLab (Erlangen, Germany). Two readers independently estimated liver R2* and T2* on the multi-echo Dixon by drawing free-hand regions of interest on the scanner-generated R2* and T2* maps. Conventional T2*-relaxometry-based LIC was the reference standard. We estimated interobserver agreement by concordance correlation coefficient (CCC). We used Bland-Altman analysis and Pearson correlation coefficient (r) to compare LIC by the two methods.

RESULTS

Fifty-four MRIs on 38 patients (22 females) were available for analysis. Mean patient age was 11.8 years (standard deviation [SD] 5.3 years). Reference standard LIC ranged 1.1-21.1 (median 6.8) mg/g dry weight of liver. The concordance between readers for T2* estimation using 3-D multi-echo Dixon was substantial (CCC 0.99, confidence interval 0.99-1.00). Bland-Altman plot showed that all observations were clustered around the zero bias line if the LIC average was ≤8 mg/g, and r was very strong (reader 1 r=0.93, reader 2 r=0.92, both P-values <0.001). With increasing LIC, there was a pattern of poor agreement on the Bland-Altman plot, with observations crossing the lower limits of agreement, and r was very weak (reader 1 r=0.05, P-value 0.84; reader 2 r=0.17, P-value 0.44).

CONCLUSION

Vendor-based 3-D multi-echo Dixon allows for excellent interobserver correlation in liver T2* estimation. LIC estimated by this method has a very strong correlation with conventional T2* relaxometry if liver iron overload is mild-moderate (LIC ≤8 mg/g).

Hepatic Iron Quantification Using a Free-Breathing 3D Radial Gradient Echo Technique and Validation With a 2D Biopsy-Calibrated R2* Relaxometry Method

BACKGROUND

Hepatic iron content (HIC) is an important parameter for the management of iron overload. Non-invasive HIC assessment is often performed using biopsy-calibrated two-dimensional breath-hold Cartesian gradient echo (2D BH GRE) R2* -MRI. However, breath-holding is not possible in most pediatric patients or those with respiratory problems, and three-dimensional free-breathing radial GRE (3D FB rGRE) has emerged as a viable alternative.

PURPOSE

To evaluate the performance of a 3D FB rGRE and validate its R2* and fat fraction (FF) quantification with 3D breath-hold Cartesian GRE (3D BH cGRE) and biopsy-calibrated 2D BH GRE across a wide range of HICs.

STUDY TYPE

Retrospective.

SUBJECTS

Twenty-nine patients with hepatic iron overload (22 females, median age: 15 [5-25] years).

FIELD STRENGTH/SEQUENCE

Three-dimensional radial and 2D and 3D Cartesian multi-echo GRE at 1.5 T.

ASSESSMENT

R2* and FF maps were computed for 3D GREs using a multi-spectral fat model and 2D GRE R2* maps were calculated using a mono-exponential model. Mean R2* and FF values were calculated via whole-liver contouring and T2* -thresholding by three operators.

STATISTICAL TESTS

Inter- and intra-observer reproducibility was assessed using Bland-Altman and intraclass correlation coefficient (ICC). Linear regression and Bland-Altman analysis were performed to compare R2* and FF values among the three acquisitions. One-way repeated-measures ANOVA and Wilcoxon signed-rank tests, respectively, were used to test for significant differences between R2* and FF values obtained with different acquisitions. Statistical significance was assumed at P < 0.05.

RESULTS

The mean biases and ICC for inter- and intra-observer reproducibility were close to 0% and >0.99, respectively for both R2* and FF. The 3D FB rGRE R2* and FF values were not significantly different (P > 0.44) and highly correlated (R2  ≥ 0.98) with breath-hold Cartesian GREs, with mean biases ≤ ±2.5% and slopes 0.90-1.12. In non-breath-holding patients, Cartesian GREs showed motion artifacts, whereas 3D FB rGRE exhibited only minimal streaking artifacts.

DATA CONCLUSION

Free-breathing 3D radial GRE is a viable alternative in non-breath-hold patients for accurate HIC estimation.

LEVEL OF EVIDENCE

3 TECHNICAL EFFICACY: Stage 2.

Noninvasive imaging of hepatic dysfunction: A state-of-the-art review

Hepatic dysfunction represents a wide spectrum of pathological changes, which can be frequently found in hepatitis, cholestasis, metabolic diseases, and focal liver lesions. As hepatic dysfunction is often clinically silent until advanced stages, there remains an unmet need to identify affected patients at early stages to enable individualized intervention which can improve prognosis. Passive liver function tests include biochemical parameters and clinical grading systems (e.g., the Child-Pugh score and Model for End-Stage Liver Disease score). Despite widely used and readily available, these approaches provide indirect and limited information regarding hepatic function. Dynamic quantitative tests of liver function are based on clearance capacity tests such as the indocyanine green (ICG) clearance test. However, controversial results have been reported for the ICG clearance test in relation with clinical outcome and the accuracy is easily affected by various factors. Imaging techniques, including ultrasound, computed tomography, and magnetic resonance imaging, allow morphological and functional assessment of the entire hepatobiliary system, hence demonstrating great potential in evaluating hepatic dysfunction noninvasively. In this article, we provide a state-of-the-art summary of noninvasive imaging modalities for hepatic dysfunction assessment along the pathophysiological track, with special emphasis on the imaging modality comparison and selection for each clinical scenario.

Fat Quantification Imaging and Biophysical Modeling for Patient-Specific Forecasting of Microwave Ablation Therapy

Computational tools are beginning to enable patient-specific surgical planning to localize and prescribe thermal dosing for liver cancer ablation therapy. Tissue-specific factors (e.g., tissue perfusion, material properties, disease state, etc.) have been found to affect ablative therapies, but current thermal dosing guidance practices do not account for these differences. Computational modeling of ablation procedures can integrate these sources of patient specificity to guide therapy planning and delivery. This paper establishes an imaging-data-driven framework for patient-specific biophysical modeling to predict ablation extents in livers with varying fat content in the context of microwave ablation (MWA) therapy. Patient anatomic scans were segmented to develop customized three-dimensional computational biophysical models and mDIXON fat-quantification images were acquired and analyzed to establish fat content and determine biophysical properties. Simulated patient-specific microwave ablations of tumor and healthy tissue were performed at four levels of fatty liver disease. Ablation models with greater fat content demonstrated significantly larger treatment volumes compared to livers with less severe disease states. More specifically, the results indicated an eightfold larger difference in necrotic volumes with fatty livers vs. the effects from the presence of more conductive tumor tissue. Additionally, the evolution of necrotic volume formation as a function of the thermal dose was influenced by the presence of a tumor. Fat quantification imaging showed multi-valued spatially heterogeneous distributions of fat deposition, even within their respective disease classifications (e.g., low, mild, moderate, high-fat). Altogether, the results suggest that clinical fatty liver disease levels can affect MWA, and that fat-quantitative imaging data may improve patient specificity for this treatment modality.

Multi-echo Dixon and breath-hold T2-corrected multi-echo single-voxel MRS for quantifying hepatic iron overload in rabbits

BACKGROUND

Three-dimensional (3D) multi-echo-Dixon (ME-Dixon) and breath-hold T2-corrected multi-echo single-voxel MR spectroscopy (HISTO) can simultaneously quantify liver fat and liver iron. However, their diagnostic efficacy and application scope for quantitative iron in co-existing fatty liver have not been adequately evaluated.

PURPOSE

To evaluate the accuracy of ME-Dixon and HISTO for quantitative analysis of hepatic iron in rabbits with iron deposition and fatty liver using liver-iron concentration (LIC) as a reference standard.

MATERIAL AND METHODS

ME-Dixon, HISTO, and conventional two-dimensional multi-echo gradient echo (GRE) sequences were performed on 42 rabbits. The following parameters were calculated: R2* from ME-Dixon and GRE; proton density fat fraction (PDFF) from the ME-Dixon, HISTO (normal TE range), and HISTO-H (extended TE range); and R2_water from HISTO and HISTO-H. The LIC and liver-fat concentration (LFC) were measured through chemical analysis, and their relationship with the MRI parameters were assessed. Receiver operating characteristic (ROC) curves and the area under the curve (AUC) were used to evaluate the diagnostic efficiency.

RESULTS

LIC was significantly correlated with R2_HISTO-H, R2*_Dixon, and R2*_GRE (r = 0.858, 0.910, 0.931, respectively; P < 0.001) and weakly with R2_HISTO (r = 0.424; P = 0.008). A strong correlation was also observed between the LFC and PDFF obtained from HISTO, HISTO-H, and ME-Dixon (r = 0.776, 0.811, 0.888, respectively; P < 0.001). ME-Dixon showed the best performance with moderate iron overload (AUC = 0.983).

CONCLUSION

3D ME-Dixon is useful for quantifying the LIC, especially with co-existing fatty liver. Its diagnostic performance is also superior to that of the HISTO sequence.

Magnetic Resonance Spectroscopy of Hepatic Fat from Fundamental to Clinical Applications

The number of individuals suffering from fatty liver is increasing worldwide, leading to interest in the noninvasive study of liver fat. Magnetic resonance spectroscopy (MRS) is a powerful tool that allows direct quantification of metabolites in tissue or areas of interest. MRS has been applied in both research and clinical studies to assess liver fat noninvasively in vivo. MRS has also demonstrated excellent performance in liver fat assessment with high sensitivity and specificity compared to biopsy and other imaging modalities. Because of these qualities, MRS has been generally accepted as the reference standard for the noninvasive measurement of liver steatosis. MRS is an evolving technique with high potential as a diagnostic tool in the clinical setting. This review aims to provide a brief overview of the MRS principle for liver fat assessment and its application, and to summarize the current state of MRS study in comparison to other techniques.