Ionic Liquids in Catalysis

Unlocking the Fluorine-Free Buoy Effect: Surface-Enriched Ruthenium Polypyridine Complexes in Ionic Liquids

Controlling the local concentration of metal complexes at the surface of ionic liquids (ILs) is a highly sought-after objective due to its pivotal implications in supported ionic liquid phase (SILP) catalysis. Equally important is to avoid per- and polyfluorinated substances due to environmental concerns. Herein, we investigate the surface enrichment of Ru polypyridyl complexes with fluorine-free alkylic side groups of varying lengths and shapes, using the hydrophilic IL [C2C1Im][OAc] as solvent. Additional charged carboxylate groups are included into the polypyridyl ligands to increase the solubility of the complex in the IL. When the ligand system is functionalized with long and hydrophobic alkyl side chains, the complex predominantly localizes at the IL/vacuum interface, as deduced from angle-resolved X-ray photoelectron spectroscopy. Conversely, in the presence of short or more bulky substituents, no surface enrichment is observed. This buoy-like behaviour with fluorine-free side groups is explored for 0.05 %mol to 1 %mol solutions. Intriguingly, surface saturation occurs at approximately 0.5 %mol, which is beneficial to the efficient operation of catalytic systems featuring high surface areas, such as SILP catalysts.

Surface Chemistry of a [C2C1Im][OTf] (Sub)Wetting Layer on Pt(111): A Combined XPS, IRAS, and STM Study

The concept of a solid catalyst with an ionic liquid layer (SCILL) is a promising approach to improve the selectivity of noble metal catalysts in heterogeneous reactions. In order to understand the origins of this selectivity control, we investigated the growth and thermal stability of ultrathin 1-ethyl-3-methylimidazolium trifluormethanesulfonate [C2C1Im][OTf] films on Pt(111) by infrared reflection absorption spectroscopy (IRAS) and X-ray photoelectron spectroscopy (XPS) in time-resolved and temperature-programmed experiments. We combined these spectroscopy experiments with scanning tunneling microscopy (STM) to obtain detailed insights into the orientation and adsorption geometry of the ions in the first IL layer. Furthermore, we propose a mechanism for the thermal evolution of [C2C1Im][OTf] on Pt(111). We observe an intact IL layer on the surface at temperatures below 200 K. Adsorbed [C2C1Im][OTf] forms islands, which are evenly distributed over the surface. The [OTf]- anion adsorbs via the SO3 group, with the molecular axis perpendicular to the surface. Anions and cations are arranged next to each other, alternating on the Pt(111) surface. Upon heating to 250 K, we observe changes in geometry and structural distribution. Whereas at low temperature, the ions are arranged alternately for electrostatic reasons, this driving force is no longer decisive at 250 K. Here, a phase separation of two different species is discernible in STM. We propose that this effect is due to a surface reaction, which changes the charge of the adsorbates. We assume that the IL starts to decompose at around 250 K, and thus, pristine IL and decomposition products coexist on the surface. Also, IRAS and XPS show indication of IL decomposition. Further heating leads to increased IL decomposition. The reaction products associated with the anions are volatile and leave the surface. In contrast, the cation fragments remain on the surface up to temperatures above 420 K.

Polymerized and Colloidal Ionic Liquids─Syntheses and Applications

The breadth and importance of polymerized ionic liquids (PILs) are steadily expanding, and this review updates advances and trends in syntheses, properties, and applications over the past five to six years. We begin with an historical overview of the genesis and growth of the PIL field as a subset of materials science. The genesis of ionic liquids (ILs) over nano to meso length-scales exhibiting 0D, 1D, 2D, and 3D topologies defines colloidal ionic liquids, CILs, which compose a subclass of PILs and provide a synthetic bridge between IL monomers (ILMs) and micro to macro-scale PIL materials. The second focus of this review addresses design and syntheses of ILMs and their polymerization reactions to yield PILs and PIL-based materials. A burgeoning diversity of ILMs reflects increasing use of nonimidazolium nuclei and an expanding use of step-growth chemistries in synthesizing PIL materials. Radical chain polymerization remains a primary method of making PILs and reflects an increasing use of controlled polymerization methods. Step-growth chemistries used in creating some CILs utilize extensive cross-linking. This cross-linking is enabled by incorporating reactive functionalities in CILs and PILs, and some of these CILs and PILs may be viewed as exotic cross-linking agents. The third part of this update focuses upon some advances in key properties, including molecular weight, thermal properties, rheology, ion transport, self-healing, and stimuli-responsiveness. Glass transitions, critical solution temperatures, and liquidity are key thermal properties that tie to PIL rheology and viscoelasticity. These properties in turn modulate mechanical properties and ion transport, which are foundational in increasing applications of PILs. Cross-linking in gelation and ionogels and reversible step-growth chemistries are essential for self-healing PILs. Stimuli-responsiveness distinguishes PILs from many other classes of polymers, and it emphasizes the importance of segmentally controlling and tuning solvation in CILs and PILs. The fourth part of this review addresses development of applications, and the diverse scope of such applications supports the increasing importance of PILs in materials science. Adhesion applications are supported by ionogel properties, especially cross-linking and solvation tunable interactions with adjacent phases. Antimicrobial and antifouling applications are consequences of the cationic nature of PILs. Similarly, emulsion and dispersion applications rely on tunable solvation of functional groups and on how such groups interact with continuous phases and substrates. Catalysis is another significant application, and this is an historical tie between ILs and PILs. This component also provides a connection to diverse and porous carbon phases templated by PILs that are catalysts or serve as supports for catalysts. Devices, including sensors and actuators, also rely on solvation tuning and stimuli-responsiveness that include photo and electrochemical stimuli. We conclude our view of applications with 3D printing. The largest components of these applications are energy related and include developments for supercapacitors, batteries, fuel cells, and solar cells. We conclude with our vision of how PIL development will evolve over the next decade.

Exploring the interfacial behavior of ruthenium complexes in ionic liquids: implications for supported ionic liquid phase catalysts

The interaction of metal complexes with ionic liquids, with a particular focus on the stability and surface concentration of the metal centers, is crucial in applications involving catalysts based on supported ionic liquids. In this study, we synthesized the complexes [Ru(tpy)(bpy)Cl][PF6] and [Ru(tpy)(dcb)Cl][PF6] (tpy = 2,2',2''-terpyridine, bpy = 2,2'-bipyridine, dcb = 4,4'-dicarboxy-2,2'-bipyridine) and we prepared solutions using the ionic liquids (ILs) 1-ethyl-3-methylimidazolium acetate [C2C1Im][OAc] and 1-butyl-3-methylimidazolium hexafluorophosphate [C4C1Im][PF6]. The chemical environment of the Ru(II) metal center and the interfacial behavior of the complexes in the different IL solutions were determined using angle-resolved X-ray photoelectron spectroscopy (ARXPS). In [C4C1Im][PF6], [Ru(tpy)(bpy)Cl][PF6] maintains its chemical structure, while in [C2C1Im][OAc], partial changes in the chemical environment of the Ru center are indicated by XPS, likely due to ligand exchange. The presence of carboxylic acid functional groups in the bipyridyl ligand seems to inhibit this ligand exchange. The investigated complexes do not exhibit surface activity but are depleted from the IL/gas interface. These findings hold significance for the design of new supported ionic liquid phase catalysts based on Ru complexes.

Silicon Oxycarbide (SiOC)-Supported Ionic Liquids: Heterogeneous Catalysts for Cyclic Carbonate Formation

Silicon oxycarbides (SiOCs) impregnated with tetrabutylammonium halides (TBAX) were investigated as an alternative to silica-based supported ionic liquid phases for the production of bio-based cyclic carbonates derived from limonene and linseed oil. The support materials and the supported ionic liquid phases (SILPs) were characterized via Fourier transform infrared spectroscopy, thermogravimetric analysis, nitrogen adsorption, X-ray photoelectron spectroscopy, microscopy, and solvent adsorption. The silicon oxycarbide supports were pyrolyzed at 300-900 °C prior to being coated with different tetrabutylammonium halides and further used as heterogeneous catalysts for the formation of cyclic carbonates in batch mode. Excellent selectivities of 97-100% and yields of 53-62% were obtained with tetrabutylammonium chloride supported on the silicon oxycarbides. For comparison, the catalytic performance of commonly employed silica-supported ionic liquids was investigated under the same conditions. The silica-supported species triggered the formation of a diol as a byproduct, leading to a lower selectivity of 87% and a lower yield of 48%. Ultimately, macroporous monolithic SiOC-SILPs with suitable permeability characteristics (k1 = 10-11 m2) were produced via photopolymerization-assisted solidification templating and applied for the selective and continuous production of limonene carbonate with supercritical carbon dioxide as the reagent and sole solvent. Constant product output over 48 h without concurrent catalyst leaching was achieved.

Tailoring Electrochemical CO2 Reduction on Copper by Reactive Ionic Liquid and Native Hydrogen Bond Donors

Electrochemical CO2 reduction (CO2 RR) on copper (Cu) shows promise for higher-value products beyond CO. However, challenges such as the limited CO2 solubility, high overpotentials, and the competing hydrogen evolution reaction (HER) in aqueous electrolytes hinder the practical realization. We propose a functionalized ionic liquid (IL) which generates ion-CO2 adducts and a hydrogen bond donor (HBD) upon CO2 absorption to modulate CO2 RR on Cu in a non-aqueous electrolyte. As revealed by transient voltammetry, electrochemical impedance spectroscopy (EIS), and in situ surface-enhanced Raman spectroscopy (SERS) complemented with image charge augmented quantum-mechanical/molecular mechanics (IC-QM/MM) computations, a unique microenvironment is constructed. In this microenvironment, the catalytic activity is primarily governed by the IL and HBD concentrations; former controlling the double layer thickness and the latter modulating the local proton availability. This translates to ample CO2 availability, reduced overpotential, and suppressed HER where C4 products are obtained. This study deepens the understanding of electrolyte effects in CO2 RR and the role of IL ions towards electrocatalytic microenvironment design.

Adsorption and thermal evolution of [C1C1Im][Tf2N] on Pt(111)

In the context of ionic liquid (IL)-assisted catalysis, we have investigated the adsorption and thermal evolution of the IL 1,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide ([C1C1Im][Tf2N]) on Pt(111) between 100 and 800 K by angle-resolved X-ray photoelectron spectroscopy and scanning tunneling microscopy. Defined amounts of IL in the coverage range of a complete first wetting layer were deposited at low temperature (100-200 K), and subsequently heated to 300 K, or directly at 300 K. At 100 K, the IL adsorbs as an intact disordered layer. Upon heating to 200 K, the IL stays intact, but forms an ordered and well-oriented structure. Upon heating to 250 K, the surface order increases, but at the same time STM and XPS indicate the onset of decomposition. Upon heating to 300 K, decomposition progresses, such that 50-60% of the IL is decomposed. The anion-related reaction products desorb instantaneously, and the cation-related products remain on the surface. Thereby, the surface is partly passivated, enabling the remaining IL to still be adsorbed intact at 300 K. For IL deposition directly at 300 K, a fraction of the IL instantaneously decomposes, with the anion-related products desorbing, opening free space for further deposition of IL. Hence, cation-related species accumulate at the expense of anions, until one fully closed wetting layer is formed. As a consequence, a higher dose is required to reach this coverage at 300 K, compared to 100-200 K.

A kinetics study of copper-catalysed click reactions in ionic liquids

Copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reactions are of extensive interest in chemical synthesis. While the use of ionic liquids (ILs) as solvents for synthesis has been widely explored in recent years, the understanding of their influence on the mechanism and reactivity of CuAAC reactions remains poorly understood. Here, we investigate the kinetics of a phenylacetylene-benzylazide and acetylene-benzylazide CuAAC reaction to probe the influence of IL structure, including the role of the base used to promote the reaction and the importance of water content. The use of 'wet' ILs led to remarkable changes in the kinetic profile of the reaction by eliminating the initial induction period. The reaction rate was found to be dependent on the copper(I) source. The effect of an added base was also studied, with the use of a tertiary amine-bearing IL leading to high conversions in under 5 min at ambient temperature. The results of this study highlight the nature and complexity of CuAAC reactions in ILs. As more ILs are getting involved in industrial processes, the data obtained from this study are valuable for better understanding processes that affect the CuAAC reaction in IL media and for creating customized systems for organic synthesis, thus improving the efficiency and sustainability of such processes.

Understanding the Buoy Effect of Surface-Enriched Pt Complexes in Ionic Liquids: A Combined ARXPS and Pendant Drop Study

Recently, we demonstrated that Pt catalyst complexes dissolved in the ionic liquid (IL) [C4 C1 Im][PF6 ] can be deliberately enriched at the IL surface by introducing perfluorinated substituents, which act like buoys dragging the metal complex towards the surface. Herein, we extend our previous angle-resolved X-ray photoelectron spectroscopy (ARXPS) studies at complex concentrations between 30 and 5 %mol down to 1 %mol and present complementary surface tension pendant drop (PD) measurements under ultraclean vacuum conditions. This combination allows for connecting the microscopic information on the IL/gas interface derived from ARXPS with the macroscopic property surface tension. The surface enrichment of the Pt complexes is found to be most pronounced at 1 %mol . It also displays a strong temperature dependence, which was not observed for 5 %mol and above, where the surface is already saturated with the complex. The surface enrichment deduced from ARXPS is also reflected by the pronounced decrease in surface tension with increasing concentration of the catalyst. We furthermore observe by ARXPS and PD a much stronger surface affinity of the buoy-complex as compared to the free ligands in solution. Our results are highly interesting for an optimum design of IL-based catalyst systems with large contact areas to the surrounding reactant/product phase, such as in supported IL phase (SILP) catalysis.

In-situ synthesis of ionic liquid-based-carbon quantum dots as fluorescence probe for hemoglobin detection

Carbon quantum dots (CQDs) have emerged as a potential fluorescent probe in bio/analytical chemistry in the present decade. The optical characteristics of CQDs may be tuned by their functional groups, which can also be used to selectively produce stable bonds with target molecules. Along with them, ionic liquids (ILs) are now demonstrating their important relevance in the field of pharmaceuticals for the creation of potent therapeutics. In the article, we have discussed the use of high fluorescent ILs-decorated-CQDs (CQDs-IM@OTf) as a straightforward and quick-acting fluorescence probe for sensitive and precise hemoglobin (Hb) determination with minimum detectability of 6.7 nM. The proposed mechanism behind this involves static mode of quenching which leads to the formation of a ground state complex [CQDs-IM@OTf-Hb complex] between the Hb protein and the drug. Despite the fact that Hb can quench the fluorescence of CQDs due to the inner filter effect (IFE) of the protein, which effects both the excitation and emission spectra of the CQDs, the addition of H₂O₂ improved the sensitivity of Hb detection. The present assay predicated on Hb interaction with H₂O₂, which produces reactive oxygen species such as hydroxyl (OH^.) and superoxide (O₂^.-) radicals under heme degradation and/or iron release from Hb. The subsequent reaction of hydroxyl radicals with CQDs, which acts as a strong oxidising agent, causes a high fluorescence quenching. The designed fluorescence probe was used to measure Hb in the concentration range of 3-90 nM with a precise detection limit of 0.33 nM. The quantification of hemoglobin (Hb) in diluted human blood samples is done using this observation.

Understanding the Liquid Structure in Mixtures of Ionic Liquids with Semiperfluoroalkyl or Alkyl Chains

By mixing ionic liquids (ILs), it is possible to fine-tune their bulk and interfacial structure. This alters their physical properties and solvation behavior and is a simple way to prepare a collection of ILs whose properties can be tuned to optimize a specific application. In this study, mixtures of perfluorinated and alkylated ILs have been prepared, and links between composition, properties, and nanostructure have been investigated. These different classes of ILs vary substantially in the flexibility and polarizability of their chains. Thus, a range of useful structural and physical property variations are accessible through mixing that will expand the library of IL mixtures available in an area that to this point has received relatively little attention. In the experiments presented herein, the physical properties and bulk structure of mixtures of 1-methyl-3-octylimidazolium bis(trifluoromethylsulfonyl)imide [C8MIM][Tf2N] and 1-(1H,1H,2H,2H-perfluorooctyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [C8MIM-F13][Tf2N] have been prepared. The bulk liquid structure was investigated using a combination of small-angle X-ray and neutron scattering (SAXS and SANS, respectively) experiments in combination with atomistic molecular dynamics simulations and the measurement of density and viscosity. We observed that the addition of [C8MIM-F13][Tf2N] to [C8MIM][Tf2N] causes changes in the nanostructure of the IL mixtures that are dependent on composition so that variation in the characteristic short-range correlations is observed as a function of composition. Thus, while the length scales associated with the apolar regions (polar non-polar peak─PNPP) increase with the proportion of [C8MIM-F13][Tf2N] in the mixtures, perhaps surprisingly given the greater volume of the fluorocarbon chains, the length scale of the charge-ordering peak decreases. Interestingly, consideration of the contact peak shows that its origins are both in the direct anion···cation contact length scale and the nature (and hence volume) of the chains appended to the imidazolium cation.

Ionic-Liquid-Mediated Deconstruction of Polymers for Advanced Recycling and Upcycling

Ionic liquids (ILs) are a promising medium to assist in the advanced (chemical and biological) recycling of polymers, owing to their tunable catalytic activity, tailorable chemical functionality, low vapor pressures, and thermal stability. These unique physicochemical properties, combined with ILs' capacity to solubilize plastics waste and biopolymers, offer routes to deconstruct polymers at reduced temperatures (and lower energy inputs) versus conventional bulk and solvent-based methods, while also minimizing unwanted side reactions. In this Viewpoint, we discuss the use of ILs as catalysts and mediators in advanced recycling, with an emphasis on chemical recycling, by examining the interplay between IL chemistry and deconstruction thermodynamics, deconstruction kinetics, IL recovery, and product recovery. We also consider several potential environmental benefits and concerns associated with employing ILs for advanced recycling over bulk- or solvent-mediated deconstruction techniques, such as reduced chemical escape by volatilization, decreased energy demands, toxicity, and environmental persistence. By analyzing IL-mediated polymer deconstruction across a breadth of macromolecular systems, we identify recent innovations, current challenges, and future opportunities in IL application toward circular polymer economies.

Structure Formation in an Ionic Liquid Wetting Layer: A Combined STM, IRAS, DFT and MD Study of [C2 C1 Im][OTf] on Au(111)

In a solid catalyst with ionic liquid layer (SCILL), ionic liquid (IL) coatings are used to improve the selectivity of noble metal catalysts. To understand the origins of this selectivity control, we performed model studies by surface science methods in ultrahigh vacuum (UHV). We investigated the growth and thermal stability of ultrathin IL films by infrared reflection absorption spectroscopy (IRAS). We combined these experiments with scanning tunneling microscopy (STM) to obtain information on the orientation of the ions, the interactions with the surface, the intermolecular interactions, and the structure formation. Additionally, we performed DFT calculations and molecular dynamics (MD) simulations to interpret the experimental data. We studied the IL 1-ethyl-3-methylimidazolium trifluoromethanesulfonate [C2 C1 Im][OTf] on Au(111) surfaces. We observe a weakly bound multilayer of [C2 C1 Im][OTf], which is stable up to 390 K, while the monolayer desorbs at ∼450 K. [C2 C1 Im][OTf] preferentially adsorbs at the step edges and elbows of the herringbone reconstruction of Au(111). The anion adsorbs via the SO3 group with the molecular axis perpendicular to the surface. At low coverage, the [C2 C1 Im][OTf] crystallizes in a glass-like 2D phase with short-range order. At higher coverage, we observe a phase transition to a 6-membered ring structure with long-range order.

Electrocatalyst Fabrication Using Metal Nanoparticles Prepared in Ionic Liquids

Metal nanoparticle-based electrocatalysts are widely used in electronic devices, which serve for electrochemical reactions like oxygen reduction reaction, alcohol oxidation and CO2 reduction reaction. These catalyst-dependent reactions are the key of the emerging clean energy systems. Catalyst design and synthesis therefore have received keen attention in past decades. We are motivated to study synthesis approaches of metal nanoparticle-based electrocatalysts using ionic liquids (ILs), which are promising solvents for the nanoparticle preparation because of their unique physicochemical properties. In this personal account, we review our previous and present works on nanoparticle preparation in IL and utilization of the obtained nanoparticles as electrocatalysts.

Thermal Stability and CO Permeability of [C4C1Pyr][NTf2]/Pd(111) Model SCILLs: from UHV to Ambient Pressure

Solid catalysts with ionic liquid layers (SCILLs) are heterogeneous catalysts which benefit significantly in terms of selectivity from a thin coating of an ionic liquid (IL). In the present work, we study the interaction of CO with a Pd model SCILL consisting of a 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)-imide ([C4C1Pyr][NTf2]) film deposited on Pd(111). We investigate the CO permeability and stability of the IL film via pressure modulation experiments by infrared reflection absorption spectroscopy (IRAS) in ultrahigh vacuum (UHV) and at ambient pressure conditions by time-resolved, temperature-programmed, and polarization-modulated (PM) IRAS experiments. In addition, we performed molecular dynamics (MD) simulations to identify adsorption motifs, their abundance, and the influence of CO. We find a strongly bound IL wetting monolayer (ML) and a potentially dewetting multilayer. Molecular reorientation of the IL at the interface and multilayer dewetting allow for the accumulation of CO at the metal/IL interface. Our results confirm that co-adsorption of CO changes the molecular structure of the IL wetting layer which confirms the importance to study model SCILL systems under in situ conditions.

Graphical abstract

Supported Ionic Liquid Phase Catalysts Dedicated for Continuous Flow Synthesis

Heterogeneous catalysis, although known for over a century, is constantly improved and plays a key role in solving the present problems in chemical technology. Thanks to the development of modern materials engineering, solid supports for catalytic phases having a highly developed surface are available. Recently, continuous-flow synthesis started to be a key technology in the synthesis of high added value chemicals. These processes are more efficient, sustainable, safer and cheaper to operate. The most promising is the use of heterogeneous catalyst with column-type fixed-bed reactors. The advantages of the use of heterogeneous catalyst in continuous flow reactors are the physical separation of product and catalyst, as well as the reduction in inactivation and loss of the catalyst. However, the state-of-the-art use of heterogeneous catalysts in flow systems compared to homogenous ones remains still open. The lifetime of heterogeneous catalysts remains a significant hurdle to realise sustainable flow synthesis. The goal of this review article was to present a state of knowledge concerning the application of Supported Ionic Liquid Phase (SILP) catalysts dedicated for continuous flow synthesis.

Molecular Resolution Nanostructure and Dynamics of the Deep Eutectic Solvent-Graphite Interface as a Function of Potential

Interest in deep eutectic solvents (DESs), particularly for electrochemical applications, has boomed in the past decade because they are more versatile than conventional electrolyte solutions and are low cost, renewable, and non-toxic. The molecular scale lateral nanostructures as a function of potential at the solid-liquid interface-critical design parameters for the use of DESs as electrochemical solvents-are yet to be revealed. In this work, in situ amplitude modulated atomic force microscopy complemented by molecular dynamics simulations is used to probe the Stern and near-surface layers of the archetypal and by far most studied DES, 1:2 choline chloride:urea (reline), at the highly orientated pyrolytic graphite surface as a function of potential, to reveal highly ordered lateral nanostructures with unprecedented molecular resolution. This detail allows identification of choline, chloride, and urea in the Stern layer on graphite, and in some cases their orientations. Images obtained after the potential is switched from negative to positive show the dynamics of the Stern layer response, revealing that several minutes are required to reach equilibrium. These results provide valuable insight into the nanostructure and dynamics of DESs at the solid-liquid interface, with implications for the rational design of DESs for interfacial applications.

Friedel-Crafts acylation of benzene derivatives in tunable aryl alkyl ionic liquids (TAAILs)

An iron(III) chloride hexahydrate-catalyzed Friedel-Crafts acylation of benzene derivatives in tunable aryl alkyl ionic liquids (TAAILs) has been developed. Through optimization of the metal salt, reaction conditions and ionic liquids, we were able to design a robust catalyst system that tolerates different electron-rich substrates under ambient atmosphere and allows for a multigram scale.

Formation and Surface Behavior of Pt and Pd Complexes with Ligand Systems Derived from Nitrile-functionalized Ionic Liquids Studied by XPS

We studied the formation and surface behavior of Pt(II) and Pd(II) complexes with ligand systems derived from two nitrile-functionalized ionic liquids (ILs) in solution using angle-resolved X-ray photoelectron spectroscopy (ARXPS). These ligand systems enabled a high solubility of the metal complexes in IL solution. The complexes were prepared by simple ligand substitution under vacuum conditions in defined excess of the coordinating ILs, [C₃ CNC₁ Im][Tf₂ N] and [C₁ CNC₁ Pip][Tf₂ N], to immediately yield solutions of the final products. The ILs differ in the cationic head group and the chain length of the functionalized substituent. Our XPS measurements on the neat ILs gave insights in the electronic properties of the coordinating substituents revealing differences in donation capability and stability of the complexes. Investigations on the composition of the outermost surface layers using ARXPS revealed no surface affinity of the nitrile-functionalized chains in the neat ILs. Solutions of the formed complexes in the nitrile ILs showed homogeneous distribution of the solute at the surface with the heterocyclic moieties preferentially orientated towards the vacuum, while the metal centers are rather located further away from the IL/vacuum interface.

The Buoy Effect: Surface Enrichment of a Pt Complex in IL Solution by Ligand Design

The targeted enrichment of a Pt complex with an ionic liquid (IL)-derived ligand system in IL solution is demonstrated by using angle-resolved X-ray photoelectron spectroscopy. When the ligand system is complemented with fluorinated side chains, the complex accumulates strongly at the IL/gas interface, while in an equivalent solution of a complex without these substituents no such effect could be observed. This buoy-like behavior induces strong population of the complex at the outermost molecular layer close to surface saturation, which was studied over a range from 5 to 30 %_mol . The surface enrichment was found to be most efficient at the lowest concentration, which is particularly favorable for catalytic applications such as supported ionic-liquid-phase (SILP) catalysis.

Understanding X-ray Photoelectron Spectra of Ionic Liquids: Experiments and Simulations of 1-Butyl-3-methylimidazolium Thiocyanate

We demonstrate a combined experimental and computational approach to probe the electronic structure and atomic environment of an ionic liquid, based on core level binding energies. The 1-butyl-3-methylimidazolium thiocyanate [C₄C₁Im][SCN] ionic liquid was studied using ab initio molecular dynamics, and results were compared against previously published and new experimental X-ray photoelectron spectroscopy (XPS) data. The long-held assumption that initial-state effects in XPS dominate the measured binding energies is proven correct, which validates the established premise that the ground state electronic structure of the ionic liquid can be inferred directly from XPS measurements. A regression model based upon site electrostatic potentials and intramolecular bond lengths is shown to account accurately for variations in core-level binding energies within the ionic liquid, demonstrating the important effect of long-range interactions on the core levels and throwing into question the validity of traditional single ion pair ionic liquid calculations for interpreting XPS data.

Direct Correlation of Surface Tension and Surface Composition of Ionic Liquid Mixtures-A Combined Vacuum Pendant Drop and Angle-Resolved X-ray Photoelectron Spectroscopy Study

We investigated the surface tension and surface composition of various mixtures of the two ionic liquids (ILs) 1-methyl-3-octyl-imidazolium hexafluorophosphate [C₈C₁Im][PF₆] and 1,3-bis(polyethylene glycol)imidazolium iodide [(mPEG₂)₂Im]I in the temperature range from 230 to 370 K under ultraclean vacuum conditions. The surface tension was measured using a newly developed apparatus, and the surface composition was determined by angle-resolved X-ray photoelectron spectroscopy (ARXPS). In the pure ILs, the alkyl chains of [C₈C₁Im][PF₆] and the PEG chains of [(mPEG₂)₂Im]I are enriched at the IL/vacuum interface. In the mixtures, a strong selective surface enrichment of the alkyl chains occurs, which is most pronounced at low [C₈C₁Im][PF₆] contents. For the surface tension, strong deviations from an ideal mixing behaviour take place. By applying a simple approach based on the surface composition of the mixtures as deduced from ARXPS, we are able to predict and reproduce the experimentally measured temperature-dependent surface tension values with astonishingly high accuracy.

Effect of the Alkyl Chain Length on Assessment as Thermo-Responsive Draw Solutes for Forward Osmosis

A series of thermo-responsive tetrabutylphosphonium 1-alkanesulfonates (abbreviated as [P₄₄₄₄][C _n S], n = 6, 8, 10, and 12), where n is the number of carbon atoms in the alkyl group on the 1-alkanesulfonate anion, were prepared by an ion-exchange reaction to investigate their potential ability toward the application of draw solutes in forward osmosis (FO). We systematically studied the recovery properties and FO performance of [P₄₄₄₄][C _n S]. This series exhibited lower critical solution temperature (LCST) characteristics, which offer a clear advantage of being energy-efficient for recovering draw solutes; however, [P₄₄₄₄][C₆S] was only observed at 20 wt %. The LCSTs of the 20 wt % [P₄₄₄₄][C₆S], [P₄₄₄₄][C₈S], [P₄₄₄₄][C₁₀S], and [P₄₄₄₄][C₁₂S] draw solutions were approximately 83, 54, 49, and 56 °C, respectively. Moreover, when the orientation of the active layer was heading toward the draw solution (AL-DS mode), the water and reverse solute flux of [P₄₄₄₄][C₁₀S] were about 1.58 LMH and 0.81 gMH, respectively, at 20 wt % aqueous solutions. When the membrane was used in the active layer facing the feed solution (AL-FS) system, the water and reverse solute flux of [P₄₄₄₄][C₁₀S] were approximately 0.71 LMH and 0.38 gMH, respectively, at 20 wt % aqueous solutions. Thus, this study is the first to examine the structural transformations of the bulkier alkyl group on the sulfonate anion moiety and its feasibility as the new draw solute for the FO system.

Catalytic Behavior of Au Confined in Ionic Liquid Film: A Kinetics Study for the Hydrochlorination of Acetylene

A systematic study of the kinetics of supported-ionic-liquid-phase (SILP) Au catalysis (Au-IL/AC) has been established in the continuous gas-phase hydrochlorination of acetylene. We reveal that the effect of ionic liquid (IL) film on substrate diffusion can be eliminated. The reaction order of the catalyst indicates that Au is confirmed to exist as a monomer in the IL film of the Au-IL/AC system, which is different from the fast equilibrium of the “Au dimer and monomer” for the classical Au/AC catalyst. The homogeneous reaction micro-environment is confirmed for Au-IL/AC since the activation energy was little changed under both heterogeneous and homogeneous catalysis, further verifying the monatomic characteristics of Au in Au-IL/AC. Due to the supported IL film, the reaction order of hydrogen chloride was decreased from 1 to 0.5 while creating a hydrogen chloride enrichment system around Au, which provides the possibility of producing vinyl chloride with an equal substrates feed ratio. This kinetic-perspective-based revelation of the catalytic behavior of the metal active sites confined in IL film enriches and expands the SILP catalytic system for acetylene hydrochlorination.

Imperative persistent interaction analysis of anticancer noscapine-ionic liquid with calf thymus DNA

In this study, we have shown the interaction between opium poppy alkaloid noscapine-based ionic liquid [Pip-Nos]OTf and ct-DNA using UV-visible absorption spectroscopy, fluorescence spectroscopy, CD, and computational studies. The absorption spectra showed a hypochromic shift with no shift in the absorption maxima suggesting groove or electrostatic binding. Fluorescence spectra showed an enhancement in fluorescence emission suggesting that the probable mode of binding should be groove binding. Ethidium bromide (EB) competitive and Ionic strength study showed the absence of intercalative and electrostatic modes of interaction. Further, CD analysis of ct-DNA suggested a groove binding mode of interaction of [Pip-Nos]OTf with ct-DNA. [Pip-Nos]OTf displayed a strong binding with the target ct-DNA with a molecular docking score of -41.47 kJ/mol with all 3D coordinates and full conformation. Also, molecular binding contact analyses depicted the stable binding of drug and ct-DNA with potential hydrogen bonds and hydrophobic interactions. The structural superimposition dynamics analysis showed the stable binding of [Pip-Nos]OTf with the ct-DNA model through RMSD statistics. Moreover, the ligand interaction calculations revealed the involvement of large binding energy along with a high static number of molecular forces including the hydrogen bonds and hydrophobic interactions in their complexation. These significant results report the potency of [Pip-Nos]OTf and its important futuristic role in cancer therapeutics.

The Potential Application of Starch and Walnut Shells as Biofillers for Natural Rubber (NR) Composites

The goal of this study was application of corn starch and ground walnut shells in various amounts by weight as biofillers of natural rubber (NR) biocomposites. Additionally, ionic liquid 1-butyl-3-methylimidazolium chloride (BmiCl) and (3-aminopropyl)-triethoxysilane (APTES) were used to increase the activity of biofillers and to improve the curing characteristics of NR composites. The effect of biofillers used and their modification with aminosilane or ionic liquid on the curing characteristics of NR composites and their functional properties, including crosslink density, mechanical properties in static and dynamic conditions, hardness, thermal stability and resistance to thermo-oxidative aging were investigated. Starch and ground walnut shells were classified as inactive fillers, which can be used alternatively to commercial inactive fillers, e.g., chalk. BmiCl and APTES were successfully used to support the vulcanization and to improve the dispersion of biofillers in NR elastomer matrix. Vulcanizates with starch, especially those containing APTES and BmiCl, exhibited improved tensile properties due to the higher crosslink density and homogenous dispersion of starch, which resulted from BmiCl addition. NR filled with ground walnut shells demonstrated improved resistance to thermo-oxidative aging. It resulted from lignin present in walnut shells, the components of which belong to polyphenols, that have an antioxidant activity.

Machine Learning Quantitative Structure–Property Relationships as a Function of Ionic Liquid Cations for the Gas-Ionic Liquid Partition Coefficient of Hydrocarbons

Ionic liquids (ILs) are known for their unique characteristics as solvents and electrolytes. Therefore, new ILs are being developed and adapted as innovative chemical environments for different applications in which their properties need to be understood on a molecular level. Computational data-driven methods provide means for understanding of properties at molecular level, and quantitative structure–property relationships (QSPRs) provide the framework for this. This framework is commonly used to study the properties of molecules in ILs as an environment. The opposite situation where the property is considered as a function of the ionic liquid does not exist. The aim of the present study was to supplement this perspective with new knowledge and to develop QSPRs that would allow the understanding of molecular interactions in ionic liquids based on the structure of the cationic moiety. A wide range of applications in electrochemistry, separation and extraction chemistry depends on the partitioning of solutes between the ionic liquid and the surrounding environment that is characterized by the gas-ionic liquid partition coefficient. To model this property as a function of the structure of a cationic counterpart, a series of ionic liquids was selected with a common bis-(trifluoromethylsulfonyl)-imide anion, [Tf2N]⁻, for benzene, hexane and cyclohexane. MLR, SVR and GPR machine learning approaches were used to derive data-driven models and their performance was compared. The cross-validation coefficients of determination in the range 0.71–0.93 along with other performance statistics indicated a strong accuracy of models for all data series and machine learning methods. The analysis and interpretation of descriptors revealed that generally higher lipophilicity and dispersion interaction capability, and lower polarity in the cations induces a higher partition coefficient for benzene, hexane, cyclohexane and hydrocarbons in general. The applicability domain analysis of models concluded that there were no highly influential outliers and the models are applicable to a wide selection of cation families with variable size, polarity and aliphatic or aromatic nature.

Small-angle neutron scattering from mixtures of long- and short-chain 3-alkyl-1-methyl imidazolium bistriflimides

The preparation of mixtures of ionic liquids (ILs) represents an attractive strategy to tune their properties, an important aspect of which is to understand how the structure of the bulk varies with composition. In this study, small-angle neutron scattering (SANS) was used to probe mixtures of methylimidazolium-based ionic liquids [C_nmim][Tf₂N] with [C₂mim][Tf₂N]) (n = 4, 6, 8 and 10) and of [C_mmim][Tf₂N] with [C₁₂mim][Tf₂N] (m = 2, 4, 6 and 8). Mixtures were prepared in both contrasts, which is to say that one component would be fully hydrogenated while the other was fully deuterated, and vice versa. Data were fitted using a range of appropriate models, of which the Teubner-Strey model provided most useful information and the pure materials showed a nascent Polar Non-polar Peak (PNPP) for n = 6, which became more evident as n increased. In the mixtures [C_nmim]_x[C₂mim]_1-x[Tf₂N], the PNPP was evident for n = 10 and 8, nascent for n = 6 and absent for n = 4, with percolation showing a very strong dependence on the chain length of the added IL, [C_nmim][Tf₂N]. In contrast, while the ability of [C₁₂mim][Tf₂N] to form percolated structures was damped when mixed with [C_mmim][Tf₂N], as m increased from 2 to 6, this effect was less strong. However, data obtained for mixtures of [C₁₂mim][Tf₂N] and [C₈mim][Tf₂N], both of which percolate as pure materials, did not fit easily in any of the models applied to the previous systems and gave results that depended on the contrast used. Complementary small-angle X-ray scattering (SAXS) data, however, showed the expected evolution and behaviour of the PNPP, COP and CP, revealing that the unexpected observations were due to an adventitious matching out of isotopic contrasts. As well as revealing details of the structures of these IL mixtures, the results also point to complementary strategies for generating bulk percolated structures as a function of cation chain length.

Bromide and Chloride Ionic Liquids Applied to Enhance the Vulcanization and Performance of Natural Rubber Biocomposites Filled with Nanosized Silica

In this study, the possibility of using ionic liquids (ILs) as auxiliary substances improving the vulcanization and physicochemical properties of natural rubber (NR) biocomposites filled with nanosized silica was investigated. Hence, the influence of ILs with bromide and chloride anions and various cations, i.e., alkylimidazolium, alkylpyrrolidinium and alkylpiperidinium cation, on the curing characteristics and crosslink density of NR compounds was determined. Furthermore, the effect of nanosized silica and ILs on the functional properties of the obtained vulcanizates, including mechanical properties under static and dynamic conditions, hardness, thermal stability and resistance to thermo-oxidative aging, were explored. Applying nanosized silica improved the processing safety of NR compounds but significantly increased the optimal vulcanization time compared to the unfilled rubber. ILs significantly improved the cure characteristics of NR compounds by increasing the rate of vulcanization and the crosslink density of NR biocomposites. Consequently, the tensile strength and hardness of the vulcanizates significantly increased compared to that without ILs. Moreover, the use of nanosized silica and ILs had a favorable impact on the thermal stability of the vulcanizates and their resistance to prolonged thermo-oxidation.

Insights into Ionic Liquids: From Z-Bonds to Quasi-Liquids

Ionic liquids (ILs) hold great promise in the fields of green chemistry, environmental science, and sustainable technology due to their unique properties, such as a tailorable structure, the various types available, and their environmentally friendly features. On the basis of multiscale simulations and experimental characterizations, two unique features of ILs are as follows: (1) strong coupling interactions between the electrostatic forces and hydrogen bonds, namely in the Z-bond, and (2) the unique semiordered structure and properties of ultrathin films, specifically regarding the quasi-liquid. In accordance with the aforementioned theoretical findings, many cutting-edge applications have been proposed: for example, CO₂ capture and conversion, biomass conversion and utilization, and energy storage materials. Although substantial progress has been made recently in the field of ILs, considerable challenges remain in understanding the nature of and devising applications for ILs, especially in terms of e.g. in situ/real-time observation and highly precise multiscale simulations of the Z-bond and quasi-liquid. In this Perspective, we review recent developments and challenges for the IL research community and provide insights into the nature and function of ILs, which will facilitate future applications.

Ionic liquids on oxide surfaces

Ionic liquids (ILs) supported on oxide surfaces are being investigated for numerous applications including catalysis, batteries, capacitors, transistors, lubricants, solar cells, corrosion inhibitors, nanoparticle synthesis and biomedical applications. The study of ILs with oxide surfaces presents challenges both experimentally and computationally. The interaction between ILs and oxide surfaces can be rather complex, with defects in the oxide surface playing a key role in the adsorption behaviour and resulting electronic properties. The choice of the cation/anion pair is also important and can influence molecular ordering and electronic properties at the interface. These controllable interfacial behaviours make ionic liquid/oxide systems desirable for a number of different technological applications as well as being utilised for nanoparticle synthesis. This topical review aims to bring together recent experimental and theoretical work on the interaction of ILs with oxide surfaces, including TiO₂, ZnO, Al₂O₃, SnO₂and transition metal oxides. It focusses on the behaviour of ILs at model single crystal surfaces, the interaction between ILs and nanoparticulate oxides, and their performance in prototype devices.

The Prospects of Clay Minerals from the Baltic States for Industrial-Scale Carbon Capture: A Review

Carbon capture is among the most sustainable strategies to limit carbon dioxide emissions, which account for a large share of human impact on climate change and ecosystem destruction. This growing threat calls for novel solutions to reduce emissions on an industrial level. Carbon capture by amorphous solids is among the most reasonable options as it requires less energy when compared to other techniques and has comparatively lower development and maintenance costs. In this respect, the method of carbon dioxide adsorption by solids can be used in the long-term and on an industrial scale. Furthermore, certain sorbents are reusable, which makes their use for carbon capture economically justified and acquisition of natural resources full and sustainable. Clay minerals, which are a universally available and versatile material, are amidst such sorbents. These materials are capable of interlayer and surface adsorption of carbon dioxide. In addition, their modification allows to improve carbon dioxide adsorption capabilities even more. The aim of the review is to discuss the prospective of the most widely available clay minerals in the Baltic States for large-scale carbon dioxide emission reduction and to suggest suitable approaches for clay modification to improve carbon dioxide adsorption capacity.

Mixed Oxime-Functionalized IL/16-s-16 Gemini Surfactants System: Physicochemical Study and Structural Transitions in the Presence of Promethazine as a Potential Chiral Pollutant

The increasing concern about chiral pharmaceutical pollutants is connected to environmental contamination causing both chronic and acute harmful effects on living organisms. The design and application of sustainable surfactants in the remediation of polluted sites require knowledge of partitioning between surfactants and potential pollutants. The interfacial and thermodynamic properties of two gemini surfactants, namely, alkanediyi-α,ω-bis(dimethylhexadecyl ammonium bromide) (16-s-16, where s = 10, 12), were studied in the presence of the inherently biodegradable oxime-functionalized ionic liquid (IL) 4-((hydroxyimino)methyl)-1-(2-(octylamino)-2-oxoethyl)pyridin-1-ium bromide (4-PyC8) in an aqueous solution using surface tension, conductivity, fluorescence, FTIR and 1H NMR spectroscopic techniques. The conductivity, surface tension and fluorescence measurements indicated that the presence of the IL 4-PyC8 resulted in decreasing CMC and facilitated the aggregation process. The various thermodynamic parameters, interfacial properties, aggregation number and Stern–Volmer constant were also evaluated. The IL 4-PyC8-gemini interactions were studied using DLS, FTIR and NMR spectroscopic techniques. The hydrodynamic diameter of the gemini aggregates in the presence of promethazine (PMZ) as a potential chiral pollutant and the IL 4-PyC8 underwent a transition when the drug was added, from large aggregates (270 nm) to small micelles, which supported the gemini:IL 4-PyC8:promethazine interaction. The structural transitions in the presence of promethazine may be used for designing systems that are responsive to changes in size and shape of the aggregates as an analytical signal for selective detection and binding pollutants.

Mixed Oxime-Functionalized IL/16-s-16 Gemini Surfactants System: Physicochemical Study and Structural Transitions in the Presence of Promethazine as a Potential Chiral Pollutant

The increasing concern about chiral pharmaceutical pollutants is connected to environmental contamination causing both chronic and acute harmful effects on living organisms. The design and application of sustainable surfactants in the remediation of polluted sites require knowledge of partitioning between surfactants and potential pollutants. The interfacial and thermodynamic properties of two gemini surfactants, namely, alkanediyi-α,ω-bis(dimethylhexadecyl ammonium bromide) (16-s-16, where s = 10, 12), were studied in the presence of the inherently biodegradable oxime-functionalized ionic liquid (IL) 4-((hydroxyimino)methyl)-1-(2-(octylamino)-2-oxoethyl)pyridin-1-ium bromide (4-PyC8) in an aqueous solution using surface tension, conductivity, fluorescence, FTIR and 1H NMR spectroscopic techniques. The conductivity, surface tension and fluorescence measurements indicated that the presence of the IL 4-PyC8 resulted in decreasing CMC and facilitated the aggregation process. The various thermodynamic parameters, interfacial properties, aggregation number and Stern–Volmer constant were also evaluated. The IL 4-PyC8-gemini interactions were studied using DLS, FTIR and NMR spectroscopic techniques. The hydrodynamic diameter of the gemini aggregates in the presence of promethazine (PMZ) as a potential chiral pollutant and the IL 4-PyC8 underwent a transition when the drug was added, from large aggregates (270 nm) to small micelles, which supported the gemini:IL 4-PyC8:promethazine interaction. The structural transitions in the presence of promethazine may be used for designing systems that are responsive to changes in size and shape of the aggregates as an analytical signal for selective detection and binding pollutants.

In situ nanoscale evaluation of pressure-induced changes in structural morphology of phosphonium phosphate ionic liquid at single-asperity contacts

In this work, we perform atomic force microscopy (AFM) experiments to evaluate in situ the dependence of the structural morphology of trihexyltetradecylphosphonium bis(2-ethylhexyl) phosphate ([P_6,6,6,14][DEHP]) ionic liquid (IL) on applied pressure. The experimental results obtained upon sliding a diamond-like-carbon-coated silicon AFM tip on mechanically polished steel at an applied pressure up to 5.5 ± 0.3 GPa indicate a structural transition of confined [P_6,6,6,14][DEHP] molecules. This pressure-induced morphological change of [P_6,6,6,14][DEHP] IL leads to the generation of a lubricious, solid-like interfacial layer, whose growth rate increases with applied pressure and temperature. The structural variation of [P_6,6,6,14][DEHP] IL is proposed to derive from the well-ordered layering of the polar groups of ions separated by the apolar tails. These results not only shed new light on the structural organization of phosphonium-based ILs under elevated pressure, but also provide novel insights into the normal pressure-dependent lubrication mechanisms of ILs in general.

n-Butane, iso-Butane and 1-Butene Adsorption on Imidazolium-Based Ionic Liquids Studied with Molecular Beam Techniques

The interaction of molecules, especially hydrocarbons, at the gas/ionic liquid (IL) surface plays a crucial role in supported IL catalysis. The dynamics of this process is investigated by measuring the trapping probabilities of n‐butane, iso‐butane and 1‐butene on a set of frozen 1‐alkyl‐3‐methylimidazolium‐based ILs [C_nC₁Im]X, where n=4, 8 and X⁻=Cl⁻, Br⁻, [PF₆]⁻ and [Tf₂N]⁻. The decrease of the initial trapping probability with increasing surface temperature is used to determine the desorption energy of the hydrocarbons at the IL surfaces. It increases with increasing alkyl chain length n and decreasing anion size for the ILs studied. We attribute these effects to different degrees of alkyl chain surface enrichment, while interactions between the adsorbate and the anion do not play a significant role. The adsorption energy also depends on the adsorbing molecule: It decreases in the order n‐butane>1‐butene>iso‐butane, which can be explained by different dispersion interactions.