BSA-PLGA-based core-shell nanoparticles as carrier system for water-soluble drugs

The assessment of pharmacokinetics and neuroprotective effect of berberine hydrochloride-embedded albumin nanoparticles via various administration routes: comparative in-vivo studies in rats

The current study aimed to evaluate the pharmacokinetics and neuroprotective effect of well-characterised berberine-bovine serum albumin (BBR-BSA) nanoparticles. BBR-BSA nanoparticles were generated by desolvation method. Entrapment efficiency, loading capacity, particle size, polydispersity index, surface morphology, thermal stability, and in-vitro release were estimated. In-vitro pharmacokinetic and tissue distribution were conducted. Their neuroprotection was evaluated against lipopolysaccharides-induced neurodegeneration. BBR-BSA nanoparticles showed satisfactory particle size (202.60 ± 1.20 nm) and entrapment efficiency (57.00 ± 1.56%). Results confirmed the formation of spheroid-thermal stable nanoparticles with a sustained drug release over 48 h. Sublingual and intranasal routes had higher pharmacokinetic plasma profiles than other routes, with Cmax values at 0.75 h (444 ± 77.79 and 259 ± 42.41 ng/mL, respectively). BBR and its metabolite distribution in the liver and kidney were higher than in plasma. Intranasal and sublingual treatment improves antioxidants, proinflammatory, amyloidogenic biomarkers, and brain architecture, protecting the brain. In conclusion, neuroinflammation and neurodegeneration may be prevented by intranasal and sublingual BBR-BSA nanoparticles.

Design and In Vitro Evaluation of Fluorescent MOF-Core CaCO₃-PEI-FA Shell Nanoparticles for Targeted Therapy of Laryngeal Cancer Cells

Laryngeal cancer, a common malignant respiratory tumor, is primarily treated through surgery. However, challenges such as recurrence, metastasis, and drug resistance persist. In recent years, multifunctional drug delivery systems (DDS) based on nanoparticles have shown great potential in improving drug loading and release. We developed a biocompatible core-shell nanoparticle system with a zinc-based metal-organic framework (MOF) as the core, named CP1. The shell, composed of polyethyleneimine (PEI), folic acid, and calcium carbonate, forms a composite called CaCO3-PEI-FA. This system enhances biocompatibility and increases the efficacy of biomedical applications. Encapsulating CP1 within the CaCO3-PEI-FA shell allows for the targeted delivery of the anticancer drug doxorubicin (DOX) to laryngeal cancer cells (Hep-2), resulting in the CaCO3-PEI-FA@CP1@DOX system. The CaCO3-PEI-FA composite exhibits strong fluorescence with a peak around 350 nm, confirming successful synthesis and demonstrating its potential as a bioimaging probe. Importantly, the nanoparticle system without DOX showed low toxicity to normal human skin fibroblasts (HSF). In vitro cytology experiments revealed a 38% inhibition rate of Hep-2 cells after 24 h, highlighting the nanocomposite's significant potential in inhibiting laryngeal cancer cell proliferation and inducing apoptosis, underscoring its promise in targeted laryngeal cancer therapy.

Controlled release of doxorubicin from Poly-(D,L-lactide-co-glycolide) (PLGA) nanoparticles prepared by coaxial electrospraying

Enhancing the efficacy and reducing the toxicity of chemotherapeutic agents like doxorubicin (DOX) is crucial in cancer treatment. Core-shell nanoparticles (NPs) fabricated by coaxial electrospraying offer controlled release of anticancer agents with the polymer shell protecting drug molecules from rapid degradation, prolonging therapeutic effect. This study developed DOX-loaded poly(lactic-co-glycolic acid) (PLGA) NPs. NPs were fabricated with matrix or core-shell structure via single needle or coaxial electrospraying, respectively. Core-shell NPs exhibited high encapsulation efficiency (>80 %) with controlled DOX distribution. Compared to matrix NPs, core-shell NPs demonstrated slower sustained release (69 % in 144 h) after reduced initial burst (22 % in 8 h). Release kinetics followed a diffusion mechanism when compared to free drug and matrix DOX-loaded NPs. In vitro assays showed core-shell NPs' enhanced cytotoxicity against breast cancer cells MCF-7, with higher uptake observed by fluorescence microscopy and flow cytometry. The IC50 for core-shell NPs displayed a significant drop (0.115 μg/mL) compared to matrix NPs (0.235 μg/mL) and free DOX (1.482 μg/mL) after 72 h. Coaxial electrospraying enables the production of therapeutically advantageous core-shell NPs, offering controlled drug release with high encapsulation efficiency, potentially improving clinical anticancer chemotherapy.

Nebulised delivery of RNA formulations to the lungs: From aerosol to cytosol

In the past decade RNA-based therapies such as small interfering RNA (siRNA) and messenger RNA (mRNA) have emerged as new and ground-breaking therapeutic agents for the treatment and prevention of many conditions from viral infection to cancer. Most clinically approved RNA therapies are parenterally administered which impacts patient compliance and adds to healthcare costs. Pulmonary administration via inhalation is a non-invasive means to deliver RNA and offers an attractive alternative to injection. Nebulisation is a particularly appealing method due to the capacity to deliver large RNA doses during tidal breathing. In this review, we discuss the unique physiological barriers presented by the lung to efficient nebulised RNA delivery and approaches adopted to circumvent this problem. Additionally, the different types of nebulisers are evaluated from the perspective of their suitability for RNA delivery. Furthermore, we discuss recent preclinical studies involving nebulisation of RNA and analysis in in vitro and in vivo settings. Several studies have also demonstrated the importance of an effective delivery vector in RNA nebulisation therefore we assess the variety of lipid, polymeric and hybrid-based delivery systems utilised to date. We also consider the outlook for nebulised RNA medicinal products and the hurdles which must be overcome for successful clinical translation. In summary, nebulised RNA delivery has demonstrated promising potential for the treatment of several lung-related conditions such as asthma, COPD and cystic fibrosis, to which the mode of delivery is of crucial importance for clinical success.

Green synthesis of bovine serum albumin/oxidized gum Arabic nanocomposite as pH-responsive carrier for controlled release of piperine and the molecular docking study

A safe drug carrier was synthesized by albumin (BSA) and oxidized gum arabic (OGA). Piperine (PIP) was loaded into BSA/OGA nanobiocomposites by desolvation method. A set of experiments were designed by considering different contents of OGA (5, 7.5 and 10 mg) and PIP (1 and 2 mg). The presence of the band at 1600-1660 cm^-1 in FTIR spectra revealed the successful interaction between OGA and BSA. PIP2-BSA/OGA5 was selected as a suitable carrier due to its smaller size (<300 nm) and higher loading efficiency (1.5 ± 0.2 %). The encapsulation efficiency of PIP into BSA/OGA5 was 57.6 ± 2 %. The average size, polydispersity index and zeta potential of PIP2-BSA/OGA5 were 292 ± 4.4 nm, 0.185 ± 0.03 and - 24.4 ± 1.7 mV, respectively. SEM and TEM images proved the formation of spherical-shaped nanoparticles. The disappearance of endothermic peak belonging to free PIP in DSC thermogram of PIP2-BSA/OGA5 evidenced its encapsulation into carrier. PIP2-BSA/OGA5 exhibited the sustained drug release. The cell viability of MCF-7 cells after 48 h exposure to BSA/OGA5, PIP2-BSA/OGA5 and free PIP was reported 90 %, 40.1 % and 30.6 %, respectively. The molecular docking study reported that the binding affinity of PIP for BSA/OGA nanocomposite was -8.7 kcal/mol indicating the acceptable stability of the prepared drug carrier.

PLGA Core-Shell Nano/Microparticle Delivery System for Biomedical Application

Core-shell particles are very well known for their unique features. Their distinctive inner core and outer shell structure allowed promising biomedical applications at both nanometer and micrometer scales. The primary role of core-shell particles is to deliver the loaded drugs as they are capable of sequence-controlled release and provide protection of drugs. Among other biomedical polymers, poly (lactic-co-glycolic acid) (PLGA), a food and drug administration (FDA)-approved polymer, has been recognized for the vehicle material. This review introduces PLGA core-shell nano/microparticles and summarizes various drug-delivery systems based on these particles for cancer therapy and tissue regeneration. Tissue regeneration mainly includes bone, cartilage, and periodontal regeneration.

Distinct endocytosis and immune activation of poly(lactic-co-glycolic) acid nanoparticles prepared by single- and double-emulsion evaporation

Background: Poly(lactic-co-glycolic) acid (PLGA) nanoparticles can be prepared by emulsion-solvent-evaporation from o/w and w₁/o/w₂ emulsions. Aims: To elaborate similarities and differences regarding mechanical, morphological and physicochemical properties, as well as endocytosis and dose-dependent immune responses by primary human leukocytes between nanoparticles prepared by these two methods. Methods: Fluorescently labeled as well as TLR agonist (R848)-loaded PLGA nanoparticles were prepared via both single- and double-emulsion solvent evaporation. Results: Particles prepared by both methods were similar in chemical composition and surface charge but exhibited slight differences in size and morphology. Pronounced differences were found for loading, dissolution and mechanical properties. The particles were differently endocytosed by monocytes and induced qualitatively and quantitatively different immune responses. Conclusions: Variations in nanoparticle preparation can affect particle-derived immunological characteristics.

PLGA/PLA-Based Long-Acting Injectable Depot Microspheres in Clinical Use: Production and Characterization Overview for Protein/Peptide Delivery

Over the past few decades, long acting injectable (LAI) depots of polylactide-co-glycolide (PLGA) or polylactic acid (PLA) based microspheres have been developed for controlled drug delivery to reduce dosing frequency and to improve the therapeutic effects. Biopharmaceuticals such as proteins and peptides are encapsulated in the microspheres to increase their bioavailability and provide a long release period (days or months) with constant drug plasma concentration. The biodegradable and biocompatible properties of PLGA/PLA polymers, including but not limited to molecular weight, end group, lactide to glycolide ratio, and minor manufacturing changes, could greatly affect the quality attributes of microsphere formulations such as release profile, size, encapsulation efficiency, and bioactivity of biopharmaceuticals. Besides, the encapsulated proteins/peptides are susceptible to harsh processing conditions associated with microsphere fabrication methods, including exposure to organic solvent, shear stress, and temperature fluctuations. The protein/peptide containing LAI microspheres in clinical use is typically prepared by double emulsion, coacervation, and spray drying techniques. The purpose of this review is to provide an overview of the formulation attributes and conventional manufacturing techniques of LAI microspheres that are currently in clinical use for protein/peptides. Furthermore, the physicochemical characteristics of the microsphere formulations are deliberated.

Polymer coated gold nanoshells for combinational photochemotherapy of pancreatic cancer with gemcitabine

Pancreatic cancer is one of the most lethal malignancies with limited therapeutic options and dismal prognosis. Gemcitabine is the front-line drug against pancreatic cancer however with limited improvement of therapeutic outcomes. In this study we envisaged the integration of GEM with gold nanoshells which constitute an interesting class of nanomaterials with excellent photothermal conversion properties. Nanoshells were coated with thiol-capped poly(ethylene glycol) methacrylate polymers of different molecular weight via Au-S attachment. It was found that the molecular weight of the polymers affects the in vitro performance of the formulations; more importantly we demonstrate that the EC50 of nanoshell loaded GEM can be suppressed but fully restored and even improved upon laser irradiation. Our proposed nanoformulations outperformed the cytotoxicity of the parent drug and showed confined synergism under the tested in vitro conditions.

Curcumin-loaded core-shell biopolymer nanoparticles produced by the pH-driven method: Physicochemical and release properties

In this study, core-shell biopolymer nanoparticles were fabricated for the encapsulation and delivery of curcumin using a pH-driven method. The influences of the coating composition on the physicochemical properties and curcumin release characteristics of the core-shell nanoparticles were studied. Fourier transform infrared spectroscopy and X-ray diffraction analyses indicated that curcumin was encapsulated in an amorphous state inside the nanoparticles. Particle size and ζ-potential measurements indicated that the biopolymer nanoparticles were relatively stable under different environmental conditions: long term storage, heating, pH changes and salt. The DPPH radical scavenging activity of the curcumin was increased after encapsulation within the nanoparticles, whereas the gastrointestinal release of curcumin was prolonged. These results were attributed to the ability of alginate and NaCas to form a thick layer around the nanoparticles, which increased the steric and electrostatic repulsion between them, as well as inhibiting the release of curcumin.

Interfacial tension effects on the properties of PLGA microparticles

Many types of long-acting injectables, including in situ forming implants, preformed implants, and polymeric microparticles, have been developed and ultimately benefited numerous patients. The advantages of using long-acting injectables include greater patient compliance and more steady state drug plasma levels for weeks and months. However, the development of long-acting polymeric microparticles has been hampered by the lack of understanding of the microparticle formation process, and thus, control of the process. Of the many parameters critical to the reproducible preparation of microparticles, the interfacial tension (IFT) effect is an important factor throughout the process. It may influence the droplet formation, solvent extraction, and drug distribution in the polymer matrix, and ultimately drug release kinetics from the microparticles. This mini-review is focused on the IFT effects on drug-loaded poly(lactic-co-glycolic acid) (PLGA) microparticles.

Targeted drug delivery systems: synthesis and in vitro bioactivity and apoptosis studies of gemcitabine-carbon dot conjugates

Gemcitabine (GEM) is used to treat various cancers such as breast, pancreatic, non-small lung, ovarian, bladder, and cervical cancers. GEM, however, has the problem of non-selectivity. Water-soluble, fluorescent, and mono-dispersed carbon dots (CDs) were fabricated by ultrasonication of sucrose. The CDs were further conjugated with GEM through amide linkage. The physical and morphological properties of these carbon dot-gemcitabine (CD-GEM) conjugates were determined using different analytical techniques. In vitro cytotoxicity and apoptosis studies of CD-GEM conjugates were evaluated by various bioactivity assays on human cell lines, MCF-7 (human breast adenocarcinoma), and HeLa (cervical cancer) cell lines. The results of kinetic studies have shown a maximum drug loading efficacy of 17.0 mg of GEM per 50.0 mg of CDs. The CDs were found biocompatible, and the CD-GEM conjugates exhibited excellent bioactivity and exerted potent cytotoxicity against tumor cells with an IC50 value of 19.50 μg ml-1 in HeLa cells, which is lower than the IC50 value of pure GEM (∼20.10 μg ml-1). In vitro studies on CD-GEM conjugates demonstrated the potential to replace the conventional administration of GEM. CD-GEM conjugates are more stable, have a higher aqueous solubility, and are more cytotoxic as compared to GEM alone. The CD-GEM conjugates show reduced side effects in the normal cells along with excellent cellular uptake. Hence, CD-GEM conjugates are more selective toward cancerous cell lines as compared to non-cancerous cells. Also, the CD-GEM conjugates successfully induced early and late apoptosis in cancer cell lines and might be effective and safe to use for in vivo applications.

Assessment of CafA Targeted BAR-Encapsulated Nanoparticles against Oral Biofilms

Porphyromonas gingivalis adherence to Streptococcus gordonii is a crucial initial event that facilitates the colonization of P. gingivalis, a key pathogen in periodontal disease. As such, blocking these early interactions may present a potential avenue to limit P. gingivalis colonization. Nanoparticles encapsulating a synthetic peptide BAR (BAR-encapsulated NPs) inhibit P. gingivalis/S. gordonii biofilm formation 1.8-fold more potently relative to free BAR. However, BAR-encapsulated NPs, like many orally delivered formulations, may benefit from a strategy that improves their retention in an open flow environment. Here, we sought to enhance the efficacy of BAR-encapsulated NPs by modifying their surfaces with coaggregation factor A (CafA), a fimbrial protein expressed by the early colonizer, Actinomyces oris. We demonstrate that the targeting moiety, CafA, enhances NP binding and exhibits specificity of adherence to S. gordonii, relative to other oral bacterial species. Furthermore, CafA-modified NPs release inhibitory concentrations of BAR for 12 h, a time frame relevant to oral dosage form delivery. Lastly, CafA-modified NPs potently inhibit P. gingivalis/S. gordonii biofilm formation for up to 12 h and are non-toxic at therapeutically-relevant concentrations. These results suggest that CafA-modified NPs represent a novel and efficacious delivery vehicle for localized, targeted delivery of BAR to P. gingivalis preferred niches.

Development of High-Drug-Loading Nanoparticles

Formulating drugs into nanoparticles offers many attractive advantages over free drugs including improved bioavailability, minimized toxic side effects, enhanced drug delivery, feasibility of incorporating other functions such as controlled release, imaging agents for imaging, targeting delivery, and loading more than one drug for combination therapies. One of the key parameters is drug loading, which is defined as the mass ratio of drug to drug-loaded nanoparticles. Currently, most nanoparticle systems have relatively low drug loading (<10 wt%), and developing methods to increase drug loading remains a challenge. This Minireview presents an overview of recent research on developing nanoparticles with high drug loading (>10 wt%) from the perspective of synthesis strategies, including post-loading, co-loading, and pre-loading. Based on these three different strategies, various nanoparticle systems with different materials and drugs are summarized and discussed in terms of their synthesis methods, drug loadings, encapsulation efficiencies, release profiles, stabilities, and their applications in drug delivery. The advantages and disadvantages of these strategies are presented with an objective of providing useful design rules for future development of high-drug-loading nanoparticles.

Core-shell nanoparticles used in drug delivery-microfluidics: a review

Developments in the fields of lab-on-a-chip and microfluidic technology have benefited nanomaterial production processes due to fluid miniaturization. The ability to acquire, manage, create, and modify structures on a nanoscale is of great interest in scientific and technological fields. Recently, more attention has been paid to the production of core-shell nanomaterials because of their use in various fields, such as drug delivery. Heterostructured nanomaterials have more reliable performance than the individual core or shell materials. Nanoparticle synthesis is a complex process; therefore, various techniques exist for the production of different types of nanoparticles. Among these techniques, microfluidic methods are unique and reliable routes, which can be used to produce nanoparticles for drug delivery applications.

One-step assembly of zein/caseinate/alginate nanoparticles for encapsulation and improved bioaccessibility of propolis

Propolis loaded zein/caseinate/alginate nanoparticles were fabricated using a facile one-step procedure without using organic solvents and sophisticated equipment.

A new therapeutic combination for osteosarcoma: Gemcitabine and Clofazimine co-loaded liposomal formulation

Osteosarcoma is the most common cancer in bone. Drug resistance is a challenge of current treatments that needs to be improved with novel treatment strategies. In this research, a new dual drug delivery system was developed with Gemcitabine (GEM) and Clofazimine (CLF) co-loaded liposome formulations. GEM is a well-known anticancer agent and CLF is a leprostatic and anti-inflammatory drug recently recognized as effective on cancer. GEM and CLF co-loaded liposomal formulation was achieved with compartmentalization as hydrophilic GEM being in core and lipophilic CLF sequestering in lipid-bilayer. Liposomes had high encapsulation efficiency (above 90%, GEM and above 80%, CLF). CLF release was enhanced while GEM release was slowed down in co-loaded liposomes compared to single cases. GEM/CLF co-loaded liposomes significantly enhanced cytotoxicity than GEM or CLF loaded liposomes on osteosarcoma cell line. CLF and GEM had synergistic effect (CI < 1). Results of flow cytometry showed higher apoptotic cell ratio, caspase-3 activity, mitochondrial membrane depolarized cells' ratio for GEM/CLF co-loaded liposome treatments than other liposomes. Cytotoxicity of CLF on bone cancer cells and also its synergistic effect with GEM on osteosarcoma is reported for the first time with this study. CLF's loading with GEM into liposome was also a new approach for enhancement of anticancer effect on Saos-2 cells. Therefore, GEM/CLF co-loaded liposomal delivery system is proposed as a novel approach for treatment of osteosarcoma.

Antibody conjugated nanoparticles as a novel form of antibody drug conjugate chemotherapy

Antibody conjugated nanoparticles (ACNPs) represent a novel strategy for the development of therapies exploiting antibodies to augment the delivery of chemotherapy payloads. Following in the footsteps of the success of antibody drug conjugates (ADCs), ACNPs are only now reaching clinical evaluation. In this review we discuss the success of ADCs and explore the opportunities ACNPs offer, such as broad chemotherapy payload selection, high drug to antibody ratios and the ability to finely tailor drug release in comparison to ADCs. The ability of ACNPs to elicit increased avidity due to multivalent effects and the potential to use these modular platforms in immunotherapeutic approaches is also explored. Through addressing challenges that still remain in bringing these complex formulations to the clinic, ACNPs hold obvious potential for the treatment of a wide range of cancers and other diseases where selective targeting of drug agents is essential.

Effects of Compositional Tailoring on Drug Delivery Behaviours of Silica Xerogel/Polymer Core-shell Composite Nanoparticles

Conventional core-shell polymer nanoparticles usually exhibit a rapid release rate with their release kinetics mainly adjusted through changing composition of the polymer shells, limiting their applications for prolonged drug delivery. As a solution to these problems, silica xerogel/polymer core-shell-structured composite nanoparticles have been proposed. Different with our previous work centring on studying process variables, we here focused on investigating the effects of key compositional variables on essential properties of the composite nanoparticles. The drug release profiles (in vitro) were well interpreted by the Baker and Lonsdale model on a predicted two-stage basis. The first stage (<1 day) was well controlled from 18.6% to 45.9%; the second stage (1-14 days) was tailored in a range from 28.7 to 58.2% by changing the composition of the silica xerogel cores and polymeric shells. A substantial achievement was reducing the release rate by more than 40 times compared with that of conventional polymer nanoparticles by virtue of the silica xerogel cores. A semi-empirical model was also established in the first attempt to describe the effects of polymer concentration and drug loading capacity on the size of the composite nanoparticles. All these results indicated that the composite nanoparticles are promising candidates for prolonged drug delivery applications.

Nanoencapsulation of phase change materials for advanced thermal energy storage systems

Phase change materials (PCMs) allow the storage of large amounts of latent heat during phase transition. They have the potential to both increase the efficiency of renewable energies such as solar power through storage of excess energy, which can be used at times of peak demand; and to reduce overall energy demand through passive thermal regulation. 198.3 million tons of oil equivalent were used in the EU in 2013 for heating. However, bulk PCMs are not suitable for use without prior encapsulation. Encapsulation in a shell material provides benefits such as protection of the PCM from the external environment and increased specific surface area to improve heat transfer. This review highlights techniques for the encapsulation of both organic and inorganic PCMs, paying particular attention to nanoencapsulation (capsules with sizes <1 μm). We also provide insight on future research, which should focus on (i) the development of multifunctional shell materials to improve lifespan and thermal properties and (ii) advanced mass manufacturing techniques for the economically viable production of PCM capsules, making it possible to utilize waste heat in intelligent passive thermal regulation systems, employing controlled, "on demand" energy release/uptake.

Microbubble-Triggered Spontaneous Separation of Transparent Thin Films from Substrates Using Evaporable Core-Shell Nanocapsules

The spontaneous separation of a polymer thin film from a substrate is an innovative technology that will enable material recycling and reduce manufacturing cost in the film industry, and this can be applied in a wide range of applications, from optical films to wearable devices. Here, we present an unprecedented spontaneous strategy for separating transparent polymer films from substrates on the basis of microbubble generation using nanocapsules containing an evaporable material. The core-shell nanocapsules are prepared from poly(methyl methacrylate)-polyethyleneimine nanoparticles via the encapsulation of methylcyclohexane (MCH). A spherical nanostructure with a vaporizable core is obtained, with the heat-triggered gas release ability leading to the formation of microbubbles. Our separation method applied to transparent polymer films doped with a small amount of the nanocapsules encapsulating evaporable MCH enables spontaneous detachment of thin films from substrates via vacuum-assisted rapid vaporization of MCH over a short separation time, and clear detachment of the film is achieved with no deterioration of the inherent optical transparency and adhesive property compared to a pristine film.

Zein Microneedles for Localized Delivery of Chemotherapeutic Agents to Treat Breast Cancer: Drug Loading, Release Behavior, and Skin Permeation Studies

Localized delivery of chemotherapeutic agents to treat breast cancer could limit their adverse drug reactions. The aim of this study was to investigate the influence of physico-chemical properties of chemotherapeutic agents in their loading, release behavior, and skin permeation using microneedles. Zein microneedles were fabricated using the micromolding technique containing 36 microneedles in a 1-cm² area. These microneedles were loaded with two anti-breast cancer drugs, tamoxifen and gemcitabine, having different water solubilities. Entrapment or surface coating of chemotherapeutic agents in zein microneedles was optimized to achieve greater loading efficiency. The greatest loading achieved was 607 ± 21 and 1459 ± 74 μg for tamoxifen and gemcitabine using the entrapment approach, respectively. Skin permeation studies in excised porcine skin showed that the coating on microneedles approach results in greater skin deposition for tamoxifen; while the poke-and-patch approach would provide greater skin permeation for gemcitabine. Taken together, it can be concluded that different loading strategies and skin penetration approaches have to be studied for delivery of small molecules using polymeric microneedles.

Latent, Immunosuppressive Nature of Poly(lactic-co-glycolic acid) Microparticles

Use of biomaterials to spatiotemporally control the activation of immune cells is at the forefront of biomedical engineering research. As more biomaterial strategies are employed for immunomodulation, understanding the immunogenicity of biodegradable materials and their byproducts is paramount in tailoring systems for immune activation or suppression. Poly(D,L-lactic-co-glycolic acid) (PLGA), one of the most commonly studied polymers in tissue engineering and drug delivery, has been previously described on one hand as an immune adjuvant, and on the other as a nonactivating material. In this study, the effect of PLGA microparticles (MPs) on the maturation status of murine bone marrow-derived dendritic cells (DCs), the primary initiators of adaptive immunity, was investigated to decipher the immunomodulatory properties of this biomaterial. Treatment of bone marrow-derived DCs from C57BL/6 mice with PLGA MPs led to a time dependent decrease in the maturation level of these cells, as quantified by decreased expression of the positive stimulatory molecules MHCII, CD80, and CD86 as well as the ability to resist maturation following challenge with lipopolysaccharide (LPS). Moreover, this immunosuppression was dependent on the molecular weight of the PLGA used to fabricate the MPs, as higher molecular weight polymers required longer incubation to produce comparable dampening of maturation molecules. These phenomena were correlated to an increase in lactic acid both intracellularly and extracellularly during DC/PLGA MP coculture, which is postulated to be the primary agent behind the observed immune inhibition. This hypothesis is supported by our results demonstrating that resistance to LPS stimulation may be due to the ability of PLGA MP-derived lactic acid to inhibit the phosphorylation of TAK1 and therefore prevent NF-κB activation. This work is significant as it begins to elucidate how PLGA, a prominent biomaterial with broad applications ranging from tissue engineering to pharmaceutics, could modulate the local immune environment and offers insight on engineering PLGA to exploit its evolving immunogenicity.

Sarcoma-Targeting Peptide-Decorated Polypeptide Nanogel Intracellularly Delivers Shikonin for Upregulated Osteosarcoma Necroptosis and Diminished Pulmonary Metastasis

Purpose: Osteosarcoma is the most common primary bone cancer and is notorious for pulmonary metastasis, representing a major threat to pediatric patients. An effective drug targeting osteosarcoma and its lung metastasis is urgently needed.

Design: In this study, a sarcoma-targeting peptide-decorated disulfide-crosslinked polypeptide nanogel (STP-NG) was exploited for enhanced intracellular delivery of shikonin (SHK), an extract of a medicinal herb, to inhibit osteosarcoma progression with minimal systemic toxicity.

Results: The targeted, loaded nanogel, STP-NG/SHK, killed osteosarcoma cells by inducing RIP1- and RIP3-dependent necroptosis in vitro. Necroptosis is a novel cell death form that could be well adapted as an efficient antitumor strategy, the main obstacle of which is its high toxicity. After intravenous injection, STP-NG/SHK efficiently suppressed tumor growth and reduced pulmonary metastasis, offering greater tumor necrosis and higher RIP1 and RIP3 upregulation compared to free SHK or untargeted NG/SHK in vivo. Additionally, the treatment with NG/SHK or STP-NG/SHK showed minimal toxicity to normal organs, suggesting low systemic toxicity compared to free SHK. Conclusion: The STP-guided intracellular drug delivery system using the necroptosis mechanism showed profound anti-osteosarcoma activity, especially eliminated lung metastasis in vivo. This drug formulation may have great potential for treatment of osteosarcoma.

Formulation and Pharmacokinetics of HSA-core and PLGA-shell Nanoparticles for Delivering Gemcitabine

Gemcitabine-loaded core-shell nanoparticles (CSNPs), comprised of a cross-linked HSA-core and PLGA-shell, were prepared through a modified double emulsification method, and the processing parameters were systematically investigated. The optimized CSNPs had a particle size of 241 ± 36.2 nm and an encapsulation efficiency of 41.52%. The core-shell structure was characterized by optical microscope (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The amorphous nature of the encapsulated drug was confirmed by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). An in vitro release study demonstrated that the CSNPs had an improved sustained release profile controlled by erosion of materials in combination with drug diffusion. In vivo pharmacokinetics of CSNPs obtained a bigger area under concentration-time curve (AUC), t _1/2, and C _max compared to free drug solution. The results suggest that HSA-PLGA-based CSNPs can be a promising carrier for the sustained release of gemcitabine.

Redox responsive albumin autogenic nanoparticles for the delivery of cancer drugs

The present study explores preparation and characterization of redox sensitive albumin autogenic nanoparticles (ANPs) for drug delivery applications. Human serum albumin nanoparticles are prepared by desolvation method. The particles are stabilized through self-crosslinking and no external stabilizers are involved in the preparation. ANPs are then subjected to Camptothecin (CPT) drug loading. Experiments on in vitro and in vivo release profile, cytotoxic and cytocompatability, hemocompatability, blood clearance, tracking and bio imaging are studied in detail. The redox sensitive and drug release properties of ANPs studied in the presence of glutathione. Results on the physical, chemical and instrumental characterization warrant the property of the nanoparticles. ANPs obtained in the present study is biocompatible, biodegradable, effectively entangle the chosen drug, release the drug in the controlled manner, sensitive to reducing environment, nil toxicity and appreciable uptake by cells. In the current scenario on the requirement of a drug carrier with redox sensitive property to encounter cancer cells, the results of the present study on albumin nanoparticles with redox sensitivity is smart and pave the way in the cancer therapeutics.

Enhanced and Extended Anti-Hypertensive Effect of VP5 Nanoparticles

Hypertension has become a significant global public health concern and is also one of the most common risk factors of cardiovascular disease. Recent studies have shown the promising result of peptides inhibiting angiotensin converting enzyme (ACE) in lowering the blood pressure in both animal models and humans. However, the oral bioavailability and continuous antihypertensive effectiveness require further optimization. Novel nanoparticle-based drug delivery systems are helpful to overcome these barriers. Therefore, a poly-(lactic-co-glycolic) acid nanoparticle (PLGANPs) oral delivery system, of the antihypertensive small peptides Val-Leu-Pro-Val-Pro (VLPVP, VP5) model, was developed in this study and its antihypertensive effect was investigated in spontaneously hypertensive rats (SHRs) for the first time. The obtained VP5 nanoparticles (VP5-NPs) showed a small particle size of 223.7 ± 2.3 nm and high entrapment efficiency (EE%) of 87.37% ± 0.92%. Transmission electronic microscopy (TEM) analysis showed that the nanoparticles were spherical and homogeneous. The optimal preparation of VP5-NPs exhibited sustained release of VP5 in vitro and a 96 h long-term antihypertensive effect with enhanced efficacy in vivo. This study illustrated that PLGANPs might be an optimal formulation for oral delivery of antihypertensive small peptides and VP5-NPs might be worthy of further development and use as a potential therapeutic strategy for hypertension in the future.

Recent advances in drug delivery strategies for improved therapeutic efficacy of gemcitabine

Gemcitabine (2',2'-difluoro-2'-deoxycytidine; dFdC) is an efficacious anticancer agent acting against a wide range of solid tumors, including pancreatic, non-small cell lung, bladder, breast, ovarian, thyroid and multiple myelomas. However, short plasma half-life due to metabolism by cytidine deaminase necessitates administration of high dose, which limits its medical applicability. Further, due to its hydrophilic nature, it cannot traverse cell membranes by passive diffusion and, therefore, enters via nucleoside transporters that may lead to drug resistance. To circumvent these limitations, macromolecular prodrugs and nanocarrier-based formulations of Gemcitabine are gaining wide recognition. The nanoformulations based approaches by virtue of their controlled release and targeted delivery have proved to improve bioavailability, increase therapeutic efficacy and reduce adverse effects of the drug. Furthermore, the combination of Gemcitabine with other anticancer agents as well as siRNAs using nanocarriers has also been investigated in order to enhance its therapeutic potential. This review deals with challenges and recent advances in the delivery of Gemcitabine with particular emphasis on macromolecular prodrugs and nanomedicines.

Optimization of protein loaded PLGA nanoparticle manufacturing parameters following a quality-by-design approach

This paper explores the development of a multivariate-based regression model for estimating the critical attributes to establish a design-space for poly(lactic-co-glycolic acid) nanoparticles prepared by a double emulsion–solvent evaporation method.

Melatonin releasing PLGA micro/nanoparticles and their effect on osteosarcoma cells

Melatonin loaded poly(D,L-lactide-co-glycolide) (PLGA) nanoparticles and microparticles in the diameter of ∼200 nm and 3.5 μm, respectively, were prepared by emulsion-diffusion-evaporation method. Melatonin entrapment into the particles was significantly improved with the addition of 0.2% (w/v) melatonin into the aqueous phase and encapsulation efficiencies were found as 14 and 27% for nanoparticles and microparticles, respectively. At the end of 40 days, ∼70% of melatonin was released from both of particles, with high burst release. Both blank and melatonin loaded PLGA nanoparticles caused toxic effect on the MG-63 cells due to their uptake by the cells. However, when 0.05 mg microparticle that is carrying ∼1.7 μg melatonin was added to the cm(2) of culture, inhibitory effect of melatonin on the cells were obviously observed. The results would provide an expectation about the usage of melatonin as an adjunct to the routine chemotherapy of osteosarcoma by encapsulating it into a polymeric carrier system.

An in vitro and in vivo study of gemcitabine-loaded albumin nanoparticles in a pancreatic cancer cell line

BACKGROUND AND OBJECTIVES

Gemcitabine (Gem) is far from satisfactory as the first-line regimen for pancreatic cancer, and the emergence of albumin nanoparticles offers new hope for the delivery of Gem. In this study, Gem-loaded human serum albumin nanoparticles (Gem-HSA-NPs) were successfully synthesized, characterized, and tested on a BxPC-3 cell line both in vitro and in vivo.

MATERIALS AND METHODS

4-N-myristoyl-gemcitabine (Gem-C14) was obtained first by coupling myristoyl with the 4-amino group of Gem. The Gem-HSA-NPs were then prepared by nanoparticle albumin-bound technology and characterized for particle size, zeta potential, morphology, encapsulation efficiency, drug-loading efficiency, and release characteristics. Using both in vitro and in vivo studies, Gem-C14 and Gem-HSA-NPs were tested on the human pancreatic cancer cell line BxPC-3.

RESULTS

Gem-HSA-NPs showed an average particle size of 150±27 nm, and with an encapsulation rate of 82.99%±3.5% and a drug-loading rate of 10.42%±3.5%, they exhibited a favorable controlled- and sustained-release nature. In in vitro, Gem-C14 was equivalent in cytotoxicity to Gem. In in vivo, the Gem-HSA-NPs exhibited the strongest inhibitory effect on tumor growth but the lowest toxicity among the four groups.

CONCLUSION

The enhanced in vivo efficacy of Gem-HSA-NPs toward the pancreatic cancer cell line suggests their potential role for use in the clinical field.

Preparation, characterization, and safety evaluation of poly(lactide-co-glycolide) nanoparticles for protein delivery into macrophages

Following infection, HIV establishes reservoirs within tissues that are inaccessible to optimal levels of antiviral drugs or within cells where HIV lies latent, thus escaping the action of anti-HIV drugs. Macrophages are a persistent reservoir for HIV and may contribute to the rebound viremia observed after antiretroviral treatment is stopped. In this study, we further investigate the potential of poly(lactic-co-glycolic) acid (PLGA)-based nanocarriers as a new strategy to enhance penetration of therapeutic molecules into macrophages. We have prepared stable PLGA nanoparticles (NPs) and evaluated their capacity to transport an active molecule into the human monocyte/macrophage cell line THP-1 using bovine serum albumin (BSA) as a proof-of-concept compound. Intracellular localization of fluorescent BSA molecules encapsulated into PLGA NPs was monitored in live cells using confocal microscopy, and cellular uptake was quantified by flow cytometry. In vitro and in vivo toxicological studies were performed to further determine the safety profile of PLGA NPs including inflammatory effects. The size of the PLGA NPs carrying BSA (PLGA-BSA) in culture medium containing 10% serum was ~126 nm in diameter, and they were negatively charged at their surface (zeta potential =−5.6 mV). Our confocal microscopy studies and flow cytometry data showed that these PLGA-BSA NPs are rapidly and efficiently taken up by THP-1 monocyte-derived macrophages (MDMs) at low doses. We found that PLGA-BSA NPs increased cellular uptake and internalization of the protein in vitro. PLGA NPs were not cytotoxic for THP-1 MDM cells, did not modulate neutrophil apoptosis in vitro, and did not show inflammatory effect in vivo in the murine air pouch model of acute inflammation. In contrast to BSA alone, BSA encapsulated into PLGA NPs increased leukocyte infiltration in vivo, suggesting the in vivo enhanced delivery and protection of the protein by the polymer nanocarrier. We demonstrated that PLGA-based nanopolymer carriers are good candidates to efficiently and safely enhance the transport of active molecules into human MDMs. In addition, we further investigated their inflammatory profile and showed that PLGA NPs have low inflammatory effects in vitro and in vivo. Thus, PLGA nanocarriers are promising as a drug delivery strategy in macrophages for prevention and eradication of intracellular pathogens such as HIV and Mycobacterium tuberculosis.

Hybrid poly(lactic-co-glycolic acid) nanoparticles: design and delivery prospectives

Poly(lactic-co-glycolic acid) (PLGA), a US Food and Drug Administration (FDA)-approved copolymer, has been exploited widely in the design of nanoparticles because it is biodegradable, biocompatible, protects the drug molecules from degradation, and aids in producing sustained and targeted delivery. However, certain constraints associated with PLGA nanoparticles, such as poor drug encapsulation, polymer degradation, and scale-up issues, have led to the development of emerging hybrid PLGA delivery systems. These hybrid nanoparticles are core-shell nanostructures comprising either a PLGA core or a PLGA shell combining multiple functionalities within one system and, thus, exhibiting the complementary characteristics of two different platforms used for the delivery of a wide range of therapeutics and imaging.

Discovery and in vivo evaluation of novel RGD-modified lipid-polymer hybrid nanoparticles for targeted drug delivery

In the current study, the lipid-shell and polymer-core hybrid nanoparticles (lpNPs) modified by Arg–Gly–Asp(RGD) peptide, loaded with curcumin (Cur), were developed by emulsification-solvent volatilization method. The RGD-modified hybrid nanoparticles (RGD–lpNPs) could overcome the poor water solubility of Cur to meet the requirement of intravenous administration and tumor active targeting. The obtained optimal RGD-lpNPs, composed of PLGA (poly(lactic-co-glycolic acid))–mPEG (methoxyl poly(ethylene- glycol)), RGD–polyethylene glycol (PEG)–cholesterol (Chol) copolymers and lipids, had good entrapment efficiency, submicron size and negatively neutral surface charge. The core-shell structure of RGD–lpNPs was verified by TEM. Cytotoxicity analysis demonstrated that the RGD–lpNPs encapsulated Cur retained potent anti-tumor effects. Flow cytometry analysis revealed the cellular uptake of Cur encapsulated in the RGD–lpNPs was increased for human umbilical vein endothelial cells (HUVEC). Furthermore, Cur loaded RGD–lpNPs were more effective in inhibiting tumor growth in a subcutaneous B16 melanoma tumor model. The results of immunofluorescent and immunohistochemical studies by Cur loaded RGD–lpNPs therapies indicated that more apoptotic cells, fewer microvessels, and fewer proliferation-positive cells were observed. In conclusion, RGD–lpNPs encapsulating Cur were developed with enhanced anti-tumor activity in melanoma, and Cur loaded RGD–lpNPs represent an excellent tumor targeted formulation of Cur which might be an attractive candidate for cancer therapy.

Immunosafety and chronic toxicity evaluation of monomethoxypoly(ethylene glycol)-b-poly(lactic acid) polymer micelles for paclitaxel delivery

To investigate the physicochemical properties, immunosafety and chronic toxicity of monomethoxypoly(ethylene glycol)-b-poly(lactic acid) (mPEG-PLA), a copolymer used as a carrier for paclitaxel (PTX) delivery. The H-Nuclear Magnetic Resonance (H-NMR), dynamic light scattering and fluorescence probe technique were conducted to determine the physicochemical properties of mPEG-PLA copolymer. PTX-loaded polymeric micelles were characterized regarding their particle size, entrapment efficiency (EE), drug loading (DL), in vitro drug release and hemolysis rate. The complement activation in human serum and mast cells degranulation were performed by ELISA and RBL-2H3 cell line in vitro, respectively. The chronic toxicity study was carried out on beagle dogs. The optimized PTX-loaded mPEG-PLA (40/60) micelles showed a particle size of 37 nm and EE of 98.0% with a DL of 17.0% w/w. Transmission electron microscopy (TEM) analyses showed that mPEG-PLA (40/60) micelles have spherical shape with dense core. In vitro release study showed a sustained release for 24 h, and the hemolysis study revealed that mPEG-PLA (40/60) was a safe nanocarrier for intravenous administration. mPEG-PLA (40/60) showed a lower complement activation ability compared to mPEG-PLA (50/50) and Cremophor® EL (Cr EL). Furthermore, the chronic toxicity of PTX-loaded mPEG-PLA (40/60) micelles was significantly lower than those of mPEG-PLA (50/50) and Cr EL.

Characterization of lysosome-destabilizing DOPE/PLGA nanoparticles designed for cytoplasmic drug release

Polymeric nanoparticles (NPs) offer a promising approach for therapeutic intracellular delivery of proteins, conventionally hampered by short half-lives, instability and immunogenicity. Remarkably, NPs uptake occurs via endocytic internalization leading to NPs content's release within lysosomes. To overcome lysosomal degradation and achieve NPs and/or loaded proteins release into cytosol, we propose the formulation of hybrid NPs by adding 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) as pH sensitive component in the formulation of poly-lactide-co-glycolide (PLGA) NPs. Hybrid NPs, featured by different DOPE/PLGA ratios, were characterized in terms of structure, stability and lipid organization within the polymeric matrix. Experiments on NIH cells and rat primary neuronal cultures highlighted the safety profile of hybrid NPs. Moreover, after internalization, NPs are able to transiently destabilize the integrity of lysosomes in which they are taken up, speeding their escape and favoring cytoplasmatic localization. Thus, these DOPE/PLGA-NPs configure themselves as promising carriers for intracellular protein delivery.

Development of lipid-shell and polymer core nanoparticles with water-soluble salidroside for anti-cancer therapy

Salidroside (Sal) is a potent antitumor drug with high water-solubility. The clinic application of Sal in cancer therapy has been significantly restricted by poor oral absorption and low tumor cell uptake. To solve this problem, lipid-shell and polymer-core nanoparticles (Sal-LPNPs) loaded with Sal were developed by a double emulsification method. The processing parameters including the polymer types, organic phase, PVA types and amount were systemically investigated. The obtained optimal Sal-LPNPs, composed of PLGA-PEG-PLGA triblock copolymers and lipids, had high entrapment efficiency (65%), submicron size (150 nm) and negatively charged surface (−23 mV). DSC analysis demonstrated the successful encapsulation of Sal into LPNPs. The core-shell structure of Sal-LPNPs was verified by TEM. Sal released slowly from the LPNPs without apparent burst release. MTT assay revealed that 4T1 and PANC-1 cancer cell lines were sensitive to Sal treatment. Sal-LPNPs had significantly higher antitumor activities than free Sal in 4T1 and PANC-1 cells. The data indicate that LPNPs are a promising Sal vehicle for anti-cancer therapy and worthy of further investigation.