Synthesis and applications of nano-TiO2: a review

Construction of BaTiO3-TiO2 hollow sphere heterojunctions for enhanced microwave dynamic therapy in cancer treatment

Cancer is one of the primary health concerns among humans due to its high incidence rate and lack of effective treatment. Currently, medical techniques to achieve the precise elimination of local cancer lesions with negligible damage to normal tissues are still intensely desired. Herein, we synthesized BaTiO3-TiO2 hollow spheres (BTHSs) for use in microwave dynamic therapy (MWDT) for cancer. Under UV irradiation, BTHSs can mediate the production of multiple reactive oxygen species (ROS), mainly 1O2, which results in a rapid photocatalytic degradation rate (97%), 1.6-fold that of commercial P25. Importantly, the ROS production process can be triggered by microwaves to effectively execute MWDT for cancer. Under microwave irradiation, BTHSs exhibit a remarkable therapeutic effect and slight cytotoxicity. In terms of mechanism, the enhanced ROS production efficiency of BTHSs can be attributed to their unique hollow structure and the formation of a type-II heterojunction by the incorporation of BaTiO3. The hollow structure increases the availability of active sites and enhances light scattering, while the BaTiO3-TiO2 heterojunction enhances the photocatalytic activity of TiO2 through charge transfer and electron-hole separation. Overall, this study provides important insights into the design and optimization of sensitizers for MWDT applications.

Less is more: The hormetic effect of titanium dioxide nanoparticles on plants

Titanium dioxide nanoparticles have attracted considerable attention due to their extensive applications; however, their multifaceted influence on plant physiology and the broader environment remains a complex subject. This review systematically synthesizes recent studies on the hormetic effects of TiO2 nanoparticles on plants - a phenomenon characterized by dual dose-response behavior that impacts various plant functions. It provides crucial insights into the molecular mechanisms underlying these hormetic effects, encompassing their effects on photosynthesis, oxidative stress response and gene regulation. The significance of this article consists in its emphasis on the necessity to establish clear regulatory frameworks and promote international collaboration to standardize the responsible adoption of nano-TiO2 technology within the agricultural sector. The findings are presented with the intention of stimulating interdisciplinary research and serving as an inspiration for further exploration and investigation within this vital and continually evolving field.

Antibacterial Hydrophilic ZnO Microstructure Film with Underwater Oleophobic and Self-Cleaning Antifouling Properties

Super-hydrophilic and oleophobic functional materials can prevent pollution or adsorption by repelling oil, and have good circulation. However, traditional strategies for preparing these functional materials either use expensive fabrication machines or contain possibly toxic organic polymers, which may prohibit the practical application. The research of multifunctional ZnO microstructures or nanoarrays thin films with super-hydrophilic, antifouling, and antibacterial properties has not been reported yet. Moreover, the exploration of underwater oleophobic and self-cleaning antifouling properties in ZnO micro/nanostructures is still in its infancy. Here, we prepared ZnO microstructured films on fluorine-doped tin oxide substrates (F-ZMF) for the development of advanced self-cleaning type super-hydrophilic and oleophobic materials. With the increase of the accelerators, the average size of the F-ZMF microstructures decreased. The F-ZMF shows excellent self-cleaning performance and hydrophilic (water contact angle ≤ 10°) and oleophobic characteristics in the underwater antifouling experiment. Under a dark condition, F-ZMF-4 showed good antibacterial effects against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) with inhibition rates of 99.1% and 99.9%, respectively. This study broadens the application scope of ZnO-based material and provides a novel prospect for the development of self-cleaning super-hydrophilic and oleophobic materials.

Nanoscaled Titanium Oxide Layer Provokes Quick Osseointegration on 3D-Printed Dental Implants: A Domino Effect Induced by Hydrophilic Surface

Three-dimensional printing is a revolutionary strategy to fabricate dental implants. Especially, 3D-printed dental implants modified with nanoscaled titanium oxide layer (H-SLM) have impressively shown quick osseointegration, but the accurate mechanism remains elusive. Herein, we unmask a domino effect that the hydrophilic surface of the H-SLM facilitates blood wetting, enhances the blood shear rate, promotes blood clotting, and changes clot features for quick osseointegration. Combining computational fluid dynamic simulation and biological verification, we find a blood shear rate during blood wetting of the hydrophilic H-SLM 1.2-fold higher than that of the raw 3D-printed implant, which activates blood clot formation. Blood clots formed on the hydrophilic H-SLM demonstrate anti-inflammatory and pro-osteogenesis effects, leading to a 1.5-fold higher bone-to-implant contact and a 1.8-fold higher mechanical anchorage at the early stage of osseointegration. This mechanism deepens current knowledge between osseointegration speed and implant surface characteristics, which is instructive in surface nanoscaled modification of multiple 3D-printed intrabony implants.

Synthesis and characterization of titanium dioxide nanoparticles from Bacillus subtilis MTCC 8322 and its application for the removal of methylene blue and orange G dyes under UV light and visible light

Over the last decade there has been a huge increase in the green synthesis of nanoparticles. Moreover, there is a continuous increase in harnessing the potential of microorganisms for the development of efficient and biocompatible nanoparticles around the globe. In the present research work, investigators have synthesized TiO2 NPs by harnessing the potential of Bacillus subtilis MTCC 8322 (Gram-positive) bacteria. The formation and confirmation of the TiO2 NPs synthesized by bacteria were carried out by using UV-Vis spectroscopy, Fourier transforms infrared (FT-IR), X-ray diffraction (XRD), scanning electron microscope (SEM), and energy dispersive X-ray spectroscopy (EDX/EDS). The size of the synthesized TiO2 NPs was 80-120 nm which was spherical to irregular in shape as revealed by SEM. FTIR showed the characteristic bands of Ti-O in the range of 400-550 cm-1 and 924 cm-1 while the band at 2930 cm-1 confirmed the association of bacterial biomolecules with the synthesized TiO2 NPs. XRD showed two major peaks; 27.5° (rutile phase) and 45.6° (anatase phase) for the synthesized TiO2 NPs. Finally, the potential of the synthesized TiO2 NPs was assessed as an antibacterial agent and photocatalyst. The remediation of Methylene blue (MB) and Orange G (OG) dyes was carried out under UV- light and visible light for a contact time of 150-240 min respectively. The removal efficiency for 100 ppm MB dye was 25.75% and for OG dye was 72.24% under UV light, while in visible light, the maximum removal percentage for MB and OG dye was 98.85% and 80.43% respectively at 90 min. Moreover, a kinetic study and adsorption isotherm study were carried out for the removal of both dyes, where the pseudo-first-order for MB dye is 263.269 and 475554.176 mg/g for OG dye. The pseudo-second-order kinetics for MB and OG dye were 188.679 and 1666.667 mg/g respectively. In addition to this, the antibacterial activity of TiO2 NPs was assessed against Bacillus subtilis MTCC 8322 (Gram-positive) and Escherichia coli MTCC 8933 (Gram-negative) where the maximum zone of inhibition in Bacillus subtilis MTCC 8322 was about 12 mm, and for E. coli 16 mm.

Self-Assembled Core-Shell Structure MgO@TiO2 as a K2CO3 Support with Superior Performance for Direct Air Capture CO2

Traditional carbon capture and storage technologies for large point sources can at best slow the rate of increase in atmospheric CO2 concentrations. In contrast, direct capture of CO2 from ambient air, or "direct air capture" (DAC), offers the potential to become a truly carbon-negative technology. Composite solid adsorbents fabricated by impregnating a porous matrix with K2CO3 are promising adsorbents for the adsorption capture of CO2 from ambient air. Nevertheless, the adsorbent can be rapidly deactivated during continuous adsorption/desorption cycles. In this study, MgO-supported, TiO2-stabilized MgO@TiO2 core-shell structures were prepared as supports using a novel self-assembled (SA) method and then impregnated with 50 wt % K2CO3 (K2CO3/MgO@TiO2, denoted as SA-KM@T). The adsorbent exhibits a high CO2 capture capacity of ∼126.6 mg CO2/g sorbent in direct air adsorption and maintained a performance of 20 adsorption/desorption cycles at 300 °C mid-temperature, which was much better than that of K2CO3/MgO. Analysis proved that the core-shell structure of the support effectively inhibited the reaction between the active component (K2CO3) and the main support (MgO) by the addition of TiO2, resulting in higher reactivity, thermal stability, and antiagglomeration properties. This work provides an alternative strategy for DAC applications using adsorbents.

Iodine-doped TiO2 nanotube coatings: a technique for enhancing the antimicrobial properties of titanium surfaces against Staphylococcus aureus

BACKGROUND

Implant-related infections are a challenging complication of orthopedic surgery, primarily due to the formation of bacterial biofilms on the implant surface. An antibacterial coating for titanium implants was developed to provide novel insights into the prevention and treatment of implant-related infections.

METHODS

Titanium plates were coated with TiO2 nanotubes by anodization, and iodine was doped onto the coating via electrophoretic deposition. The obtained plates were characterized using a range of analytical techniques. Subsequently, Staphylococcus aureus was inoculated onto the surfaces of untreated titanium plates (control group), TiO2-nanocoated titanium plates (TiO2 group), and iodine-doped TiO2-nanocoated titanium plates (I-TiO2 group) to compare their antibacterial properties.

RESULTS

Twenty-four hour in vitro antimicrobial activity test of the I-TiO2 group against Staphylococcus aureus was superior to those of the other groups, and this difference was statistically significant (P < 0.05).

CONCLUSIONS

This coating technology provides a new theoretical basis for the development of anti-infective implants against Staphylococcus aureus in orthopedics.

Selectivity of Sol-Gel and Hydrothermal TiO2 Nanoparticles towards Photocatalytic Degradation of Cationic and Anionic Dyes

Titanium dioxide (TiO2) nanoparticles have been extensively studied for catalyzing the photo-degradation of organic pollutants, the photocatalyst being nonselective to the substrate. We, however, found that TiO2 nanoparticles prepared via the sol-gel and hydrothermal synthetic routes each possess a definite specificity to the charge of the substrate for photodegradation. The nanoparticles were characterized by SEM, FTIR, XRD, TGA, and UV-visible spectra, and the photocatalytic degradation under UV-B (285 nm) irradiation of two model compounds, anionic methyl Orange (MO) and cationic methylene blue (MB) was monitored by a UV-visible spectrophotometer. Untreated sol-gel TiO2 nanoparticles (Tsg) preferentially degraded MO over MB (90% versus 40% in two hours), while after calcination at 400 °C for two hours (Tsgc) they showed reversed specificity (50% MO versus 90% MB in one hour). The as-prepared hydrothermal TiO2 nanoparticles (Tht) behaved in the opposite sense of Tsg (41% MO versus 91% MB degraded in one and a half hours); calcination at 400 °C (Thtc) did not reverse the trend but enhanced the efficiency of degradation. The study indicates that TiO2 nanoparticles can be made to degrade a specific class of organic pollutants from an effluent facilitating the recycling of a specific class of pollutants for cost-effective effluent management.

"Photovoltaic response of Carissa spinarum berry extract in dye-sensitized solar cell"

The presented work deals with the titanium dioxide semiconductor-based dye-sensitized solar cell (DSSC) performance analysis. The DSSC is sensitized with natural dye extracted from Carissa spinarum fruit with iodide-Tri-iodide as an electrolyte and graphite coated transparent conducting oxide as back electrode. The dye characteristics were investigated by Fourier transform infrared, ultraviolet-visible, and photoluminescence spectroscopy to study the associated functional groups, optical band gap, and emission, respectively. The understudied dye showed an absorption edge at 530nm with an optical band gap around 2.2eV and a broad emission band from 630 to 820nm and with a sharp peak at 741nm. Cyclic voltammograms were employed to estimate the energy levels of the understudy sensitizer. This well-characterized dye has been successfully used in DSSC, and its photovoltaic response was studied under-stimulated AM 1.5 solar illumination using 100mWcm-2 light intensity. For this cell, the short circuit current density (JSC) was 4.17mAcm-2 and the open circuit voltage was 0.423V leading to the power conversion efficiency of 0.956%. Furthermore, this device was also subjected to an open-circuit voltage decay study. We also calculated the lifetime of decay, series resistance (RS), saturation current (IS), shunt resistance (RSh), and the ideality factor (n). Also, an in-depth investigation related to recombination phenomena and how these associated parameters influence the cell's photovoltaic (PV) properties was carried out. The PV performance was also tested in different wavelengths (red, green, blue, etc.) and various useful parameters were calculated.

Synergistic Effect of Y Doping and Reduction of TiO2 on the Improvement of Photocatalytic Performance

Pure TiO2 and 3% Y-doped TiO2 (3% Y-TiO2) were prepared by a one-step hydrothermal method. Reduced TiO2 (TiO2-H2) and 3% Y-TiO2 (3% Y-TiO2-H2) were obtained through the thermal conversion treatment of Ar-H2 atmosphere at 500 °C for 3 h. By systematically comparing the crystalline phase, structure, morphological features, and photocatalytic properties of 3% Y-TiO2-H2 with pure TiO2, 3% Y-TiO2, and TiO2-H2, the synergistic effect of Y doping and reduction of TiO2 was obtained. All samples show the single anatase phase, and no diffraction peak shift is observed. Compared with single-doped TiO2 and single-reduced TiO2, 3% Y-TiO2-H2 exhibits the best photocatalytic performance for the degradation of RhB, which can be totally degraded in 20 min. The improvement of photocatalytic performance was attributed to the synergistic effect of Y doping and reduction treatment. Y doping broadened the range of light absorption and reduced the charge recombination rates, and the reduction treatment caused TiO2 to be enveloped by disordered shells. The remarkable feature of reduced TiO2 by H2 is its disordered shell filled with a limited amount of oxygen vacancies (OVs) or Ti3+, which significantly reduces the Eg of TiO2 and remarkably increases the absorption of visible light. The synergistic effect of Y doping, Ti3+ species, and OVs play an important role in the improvement of photocatalytic performances. The discovery of this work provides a new perspective for the improvement of other photocatalysts by combining doping and reduction to modify traditional photocatalytic materials and further improve their performance.

Advances in the catalyzed photo-fermentative biohydrogen production through photo nanocatalysts with the potential of selectivity, and customization

Photo nanocatalyst have shownpromise in a variety of fields, including biohydrogen production where their catalytic efficiency is related to size, surface-to-volume ratio, and increasing the number of atoms on the surface. They can harvest solar light to create electron-hole pairs which is the key mechanism to define its catalytic efficiency, thus requiring suitable excitation wavelength, band energy, and crystal imperfections. In this review, a discussion on the role of photo nanocatalysts to catalyze biohydrogen production has been carried out. Photo nanocatalysts feature a large bandgap, andhigh defect concentration, thus having the ability to be tuned for their characteristics. Customization of the photo nanocatalyst has been addressed. Mechanism of the photo nanocatalysts in catalyzing biohydrogen has been discussed. Limiting factors of photo nanocatalysts were highlighted and several recommendations have been made to enhance the effective utilization of these photo nanocatalysts to enhance photo-fermentative biohydrogen production from biomass wastes.

Toxic effects of titanium dioxide nanoparticles on reproduction in mammals

Titanium dioxide nanoparticles (nano-TiO₂) are widely used in food, textiles, coatings and personal care products; however, they cause environmental and health concerns. Nano-TiO₂ can accumulate in the reproductive organs of mammals in different ways, affect the development of the ovum and sperm, damage reproductive organs and harm the growth and development of offspring. The oxidative stress response in germ cells, irregular cell apoptosis, inflammation, genotoxicity and hormone synthesis disorder are the main mechanisms of nano-TiO₂ toxicity. Possible measures to reduce the harmful effects of nano-TiO₂ on humans and nontarget organisms have emerged as an underexplored topic requiring further investigation.

Preparation of a Hybrid TiO2 and 1T/2H-MoS2 Photocatalyst for the Degradation of Tetracycline Hydrochloride

Water pollution caused by antibiotics is a growing problem. Semiconductor photocatalysis is an environmentally friendly technology that can effectively degrade organic pollutants in water. Therefore, the development of efficient photocatalysts is of great significance to solve the environmental pollution problem. In this paper, mixed-phase TiO₂ and 1T/2H-MoS₂ composite (1T/2H-MoS₂/TiO₂) were synthesized by the in situ growth method. The prepared compounds were characterized and applied to the visible-light degradation of tetracycline hydrochloride. The photocatalytic effect of 1T/2H-MoS₂/TiO₂ on tetracycline hydrochloride is significantly enhanced under visible light and has good stability. It has potential applications in the treatment of organic pollutants in water.

The Boom in Nanomaterials for Built Heritage Conservation: Why Does Size Matter?

There is no doubt that nanotechnology and nanoscience open new doors to new applications and products that can potentially revolutionize the practice field and how we conserve built heritage materials. However, we are living at the beginning of this era and the potential benefits of nanotechnology to specific conservation practice needs are not always fully understood. This opinion/review paper aims to present reflections and answer a question that we are often asked when working directly with stone field conservators: why should we use a nanomaterial instead of a conventional product? Why does size matter? To answer this question, we revise the basic concepts of nanoscience with implications for the built heritage conservation field.

Room-temperature ammonia gas sensing via Au nanoparticle-decorated TiO2 nanosheets

A high-performance gas sensor operating at room temperature is always favourable since it simplifies the device fabrication and lowers the operating power by eliminating a heater. Herein, we fabricated the ammonia (NH₃) gas sensor by using Au nanoparticle-decorated TiO₂ nanosheets, which were synthesized via two distinct processes: (1) preparation of monolayer TiO₂ nanosheets through flux growth and a subsequent chemical exfoliation and (2) decoration of Au nanoparticles on the TiO₂ nanosheets via hydrothermal method. Based on the morphological, compositional, crystallographic, and surface characteristics of this low-dimensional nano-heterostructured material, its temperature- and concentration-dependent NH₃ gas-sensing properties were investigated. A high response of ~ 2.8 was obtained at room temperature under 20 ppm NH₃ gas concentration by decorating Au nanoparticles onto the surface of TiO₂ nanosheets, which generated oxygen defects and induced spillover effect as well.

Composites of Montmorillonite and Titania Nanoparticles Prepared by Inverse Microemulsion Method: Physico-Chemical Characterization

TiO₂/montmorillonite composites were synthesized using inverse micellar route for the preparation of titania nanoparticles (4-6 nm diameter) in 1-hexanol and for the dispersion of one of the clay components. Two series of composites were obtained: one derived from cetyltrimethylammonium organomontmorillonite (CTA-Mt), exfoliated in 1-hexanol, and the other from sodium form of montmorillonite (Na-Mt) dispersed by formation of an inverse microemulsion in 1-hexanol. The TiO₂ content ranged from 16 to 64 wt.%. The composites were characterized with X-ray diffraction, scanning/transmission electron microscopy/energy dispersive X-ray spectroscopy, thermal analysis, and N₂ adsorption-desorption isotherms. The Na-Mt-derived component was shown to undergo transformation to CTA-Mt, as indicated by basal spacing of 17.5 nm, due to the interaction with the CTABr surfactant in inverse microemulsion. It was also better dispersed and intermixed with TiO₂ nanoparticles. As a result, the TiO₂/Na-Mt series displayed superior textural properties, with specific surface area up to 256 m²g^-1 and pore volume up to 0.247 cm³g^-1 compared with 208 m²g^-1 and 0.231 cm³g^-1, respectively, for the TiO₂/CTA-Mt counterpart. Members of both series were uniformly mesoporous, with the dominant pore size around 5 nm, i.e., comparable with the dimensions of titania nanoparticles. The advantage of the adopted synthesis method is discussed in the context of other preparative procedures used for manufacturing of titania-clay composites.

Aerosol-assisted synthesis of titania-based spherical and fibrous materials with a rational design of mesopores using PS-b-PEO

Surfactant-assisted synthesis is a promising technique for the tailor-made design of highly porous metal oxide based nanomaterials. There has been a demand for the comprehensive design of their morphology, porous structure and crystallinity to extend potential applications using metal oxide based materials such as titania (TiO₂). However, the porous structure is often deformed and/or destroyed during the process of crystallizing metal oxide frameworks. Herein, the aerosol-assisted synthesis of mesoporous TiO₂ powders was conducted in the presence of high-molecular-weight poly(styrene)-block-poly(ethylene oxide) (PS-b-PEO), which improved the stability of the derivative mesoporous structure with an increase in the thickness of the TiO₂ frameworks. To propose a rational synthetic route for stable and porous metal oxides, the resultant mesoporous structure and the textural morphology of the mesoporous TiO₂ powders were surveyed using PS-b-PEO with different lengths of PS and PEO chains. By a judicious choice of the molecular structure of PS-b-PEO, the morphological design of the fully crystallized anatase phase of TiO₂ from spherical to fibrous ones was achieved with control over the mesopore diameter.

The environmental remediation capacity of Ulva lactuca: the potential of macroalgae to reduce the threats caused by Titanium in marine invertebrate species

As a result of the wide use of Titanium (Ti) compounds in various products, Ti and Ti nanoparticles (nTi) are released into aquatic environments, inducing varying degrees of toxicity on aquatic fauna. Ulva lactuca, green macroalgae commonly found in coastal areas, has been extensively studied due to its worldwide distribution and capacity to accumulate trace elements under toxic conditions, which makes it a good universal sorbent. The present study aimed to establish the remediation properties of U. lactuca by evaluating the toxicity of Ti and nTi in bivalves, in the presence and absence of algae. Using the bivalve species Mytilus galloprovincialis, Ti toxicity was evaluated by assessing changes in mussel's metabolic capacity and oxidative status. Results evidenced cellular damage in M. galloprovincialis exposed to Ti and nTi. This was a result of the inactivation of antioxidant defences. The presence of U. lactuca limited cellular damage, however, this was not a result of the previously demonstrated bioremediation capacity, as no accumulation of Ti was verified in algal tissues. As a metabolic depression was verified for mussels exposed to Ti/nTi in the presence of algae, we hypothesise that U. lactuca may have been responsible for changes to the water quality which induced this response.

Polymorphic control in titanium dioxide particles

The hydrolysis-condensation reaction of TiO₂ was adapted to the phase inversion temperature (PIT)-nano-emulsion method as a low energy approach to gain control over the size and phase purity of the resulting metal oxide particles. Three different PIT-nano-emulsion syntheses were designed, each one intended to isolate high purity rutile, anatase, and brookite phase particles. Three different emulsion systems were prepared, with a pH of either strongly acidic (H₂O : HNO₃, pH ∼0.5), moderately acidic (H₂O : isopropanol, pH ∼4.5), or alkaline (H₂O : NaOH, pH ∼12). PIT-nano-emulsion syntheses of the amorphous TiO₂ particles were conducted under these conditions, resulting in average particle diameter distributions of ∼140 d nm (strongly acidic), ∼60 d nm (moderately acidic), and ∼460 d nm (alkaline). Different thermal treatments were performed on the amorphous particles obtained from the PIT-nano-emulsion syntheses. Raman spectroscopy and powder X-ray diffraction (PXRD) were employed to corroborate that the thermally treated particles under H₂O : HNO₃ (at 850 °C), H₂O : NaOH (at 400 °C), and H₂O : isopropanol (at 200 °C) yielded highly-pure rutile, anatase, and brookite phases, respectively. Herein, an experimental approach based on the PIT-nano-emulsion method is demonstrated to synthesize phase-controlled TiO₂ particles with high purity employing fewer toxic compounds, reducing the quantity of starting materials, and with a minimum energy input, particularly for the almost elusive brookite phase.

Construction of Z-Scheme TiO2/Au/BDD Electrodes for an Enhanced Electrocatalytic Performance

TiO₂/Au/BDD composites with a Z-scheme structure was prepared by orderly depositing gold (Au) and titanium dioxide (TiO₂) on the surface of a boron-doped diamond (BDD) film using sputtering and electrophoretic deposition methods. It was found that the introduction of Au between TiO₂ and the BDD, not only could reduce their contact resistance, to increase the carrier transport efficiency, but also could improve the surface Hall mobility of the BDD electrode. Meanwhile, the designed Z-scheme structure provided a fast channel for the electrons and holes combination, to promote the effective separation of the electrons and holes produced in TiO₂ and the BDD under photoirradiation. The electrochemical characterization elucidated that these modifications of the structure obviously enhanced the electrocatalytic performance of the electrode, which was further verified by the simulated wastewater degradation experiments with reactive brilliant red X-3B. In addition, it was also found that the photoirradiation effectively enhanced the pollution degradation efficiency of the modified electrode, especially for the TiO₂/Au/BDD-30 electrode.

Three-dimensional imaging performance of photoelectrochemical cells

A photoelectrochemical (PEC) cell produces hydrogen energy using solar energy and an electrochemical reaction. In the hydrogen production process with water decomposition, electrons move from the anode to the cathode, and by measuring the current value at this time, the PEC cell can generate hydrogen and function as an image sensor at the same time. Due to the characteristics of the PEC cell that can perform both functions simultaneously, it can be applied as a device that can detect and respond to the surrounding environment without the need for an observation system such as a camera. We present the imaging performance of PEC cells. The effectiveness of the experiment was confirmed by applying the PEC cells to integral imaging, one of the three-dimensional (3D) imaging techniques.

Innovative strategies for photodynamic therapy against hypoxic tumor

Photodynamic therapy (PDT) is applied as a robust therapeutic option for tumor, which exhibits some advantages of unique selectivity and irreversible damage to tumor cells. Among which, photosensitizer (PS), appropriate laser irradiation and oxygen (O₂) are three essential components for PDT, but the hypoxic tumor microenvironment (TME) restricts the O₂ supply in tumor tissues. Even worse, tumor metastasis and drug resistance frequently happen under hypoxic condition, which further deteriorate the antitumor effect of PDT. To enhance the PDT efficiency, critical attention has been received by relieving tumor hypoxia, and innovative strategies on this topic continue to emerge. Traditionally, the O₂ supplement strategy is considered as a direct and effective strategy to relieve TME, whereas it is confronted with great challenges for continuous O₂ supply. Recently, O₂-independent PDT provides a brand new strategy to enhance the antitumor efficiency, which can avoid the influence of TME. In addition, PDT can synergize with other antitumor strategies, such as chemotherapy, immunotherapy, photothermal therapy (PTT) and starvation therapy, to remedy the inadequate PDT effect under hypoxia conditions. In this paper, we summarized the latest progresses in the development of innovative strategies to improve PDT efficacy against hypoxic tumor, which were classified into O₂-dependent PDT, O₂-independent PDT and synergistic therapy. Furthermore, the advantages and deficiencies of various strategies were also discussed to envisage the prospects and challenges in future study.

Amino-Alkylphosphonate-Grafted TiO2: How the Alkyl Chain Length Impacts the Surface Properties and the Adsorption Efficiency for Pd

Amino-alkylphosphonic acid-grafted TiO₂ materials are of increasing interest in a variety of applications such as metal sorption, heterogeneous catalysis, CO₂ capture, and enzyme immobilization. To date, systematic insights into the synthesis-properties-performance correlation are missing for such materials, albeit giving important know-how towards their applicability and limitations. In this work, the impact of the chain length and modification conditions (concentration and temperature) of amino-alkylphosphonic acid-grafted TiO₂ on the surface properties and adsorption performance of palladium is studied. Via grafting with aminomethyl-, 3-aminopropyl-, and 6-aminohexylphosphonic acid, combined with the spectroscopic techniques (DRIFT, ³¹P NMR, XPS) and zeta potential measurements, differences in surface properties between the C1, C3, and C6 chains are revealed. The modification degree decreases with increasing chain length under the same synthesis conditions, indicative of folded grafted groups that sterically shield an increasing area of binding sites with increasing chain length. Next, all techniques confirm the different surface interactions of a C1 chain compared to a C3 or C6 chain. This is in line with palladium adsorption experiments, where only for a C1 chain, the adsorption efficiency is affected by the precursor concentration used for modification. The absence of a straightforward correlation between the number of free NH₂ groups and the adsorption capacity for the different chain lengths indicates that other chain-length-specific surface interactions are controlling the adsorption performance. The increasing pH stability in the order of C1 < C3 < C6 can possibly be associated to a higher fraction of inaccessible hydrophilic sites due to the presence of folded structures. Lastly, the comparison of adsorption performance and pH stability with 3-aminopropyl(triethoxysilane)-grafted TiO₂ reveals the applicability of both grafting methods depending on the envisaged pH during sorption.

Effect of oxidative and non-oxidative conditions on molecular size fractionation of humic acids: TiO2 and Cu-doped TiO2 photocatalysis

Natural waters contain some carbonaceous materials referred to as dissolved organic matter, which is mainly composed of humic acids (HA). Owing to its polydispersed character related to the presence of diverse molecular size fractions (< 450 kDa to even < 1 kDa), HA displays curious reactivity in natural waters and during water treatment train. In this study, a system-based stepwise approach was tracked by characterizing HA following photolysis, adsorptive interactions, and solar photocatalysis using bare TiO₂, sol-gel prepared TiO₂, and their respective Cu-doped specimens complementary to kinetic evaluation on this respect. For this purpose, prior to and following each treatment, HA was monitored by dissolved organic carbon content, UV-vis parameters, and fluorescence features. Attenuated total reflection Fourier transform infrared (FTIR), surface-enhanced Raman scattering spectroscopy (SERS), XRD, SEM, EDAX XPS, and DRS were used to characterize the materials and solutions reported in this study. Most significant quantitative variations were attained in UV-vis spectroscopic parameters along with fluorescence characteristics; however, infrared and Raman profiles displayed slight deviations in qualitative measures. Differentiation between the selected photocatalyst specimens could be visualized through molecular size effects pointing out the significance of HA 10 kDa fraction. For the first time, this study reports the degradation of specific fractions of HA as a function of their molecular size fraction. Cu-TiO₂ seems to photocatalyze more effectively the degradation of the diverse HA fractions due to their more extended absorption of solar light by this photocatalyst.

Role of RNA m6A modification in titanium dioxide nanoparticle-induced acute pulmonary injury: An in vitro and in vivo study

RNA N⁶-methyladenosine (m⁶A) modification regulates the cell stress response and homeostasis, but whether titanium dioxide nanoparticle (nTiO₂)-induced acute pulmonary injury is associated with the m⁶A epitranscriptome and the underlying mechanisms remain unclear. Here, the potential association between m⁶A modification and the bioeffects of several engineered nanoparticles (nTiO₂, nAg, nZnO, nFe₂O₃, and nCuO) were verified thorough in vitro experiments. nFe₂O₃, nZnO, and nTiO₂ exposure significantly increased the global m⁶A level in A549 cells. Our study further revealed that nTiO₂ can induce m⁶A-mediated acute pulmonary injury. Mechanistically, nTiO₂ exposure promoted methyltransferase-like 3 (METTL3)-mediated m⁶A signal activation and thus mediated the inflammatory response and IL-8 release through the degeneration of anti-Mullerian hormone (AMH) and Mucin5B (MUC5B) mRNAs in a YTH m⁶A RNA-binding protein 2 (YTHDF2)-dependent manner. Moreover, nTiO₂ exposure stabilized METTL3 protein by the lipid reactive oxygen species (ROS)-activated ERK1/2 pathway. The scavenging of ROS with ferrostatin-1 (Fer-1) alleviates the ERK1/2 activation, m⁶A upregulation, and the inflammatory response caused by nTiO₂ both in vitro and in vivo. In conclusion, our study demonstrates that m⁶A is a potential intervention target for alleviating the adverse effects of nTiO₂-induced acute pulmonary injury in vitro and in vivo, which has far-reaching implications for protecting human health and improving the sustainability of nanotechnology.

TiO2 Nanoparticles and Their Effects on Eukaryotic Cells: A Double-Edged Sword

Nanoparticulate TiO₂ (TiO₂ NPs) is a widely used material, whose potential toxicity towards eukaryotic cells has been addressed by multiple studies. TiO₂ NPs are considered toxic due to their production of reactive oxygen species (ROS), which can, among others, lead to cellular damage, inflammatory responses, and differences in gene expression. TiO₂ NPs exhibited toxicity in multiple organs in animals, generating potential health risks also in humans, such as developing tumors or progress of preexisting cancer processes. On the other hand, the capability of TiO₂ NPs to induce cell death has found application in photodynamic therapy of cancers. In aquatic environments, much has been done in understanding the impact of TiO₂ on bivalves, in which an effect on hemocytes, among others, is reported. Adversities are also reported from other aquatic organisms, including primary producers. These are affected also on land and though some potential benefit might exist when it comes to agricultural plants, TiO₂ can also lead to cellular damage and should be considered when it comes to transfer along the food chain towards human consumers. In general, much work still needs to be done to unravel the delicate balance between beneficial and detrimental effects of TiO₂ NPs on eukaryotic cells.

Preparation and modification methods of defective titanium dioxide-based nanoparticles for photocatalytic wastewater treatment-a comprehensive review

The rapid population growth and industrial expansion worldwide have created serious water contamination concerns. To curb the pollution issue, it has become imperative to use a versatile material for the treatment. Titanium dioxide (TiO₂) has been recognized as the most-studied nanoparticle in various fields of science and engineering due to its availability, low cost, efficiency, and other fascinating properties with a wide range of applications in modern technology. Recent studies revealed the photocatalytic activity of the material for the treatment of industrial effluents to promote environmental sustainability. With the wide band gap energy of 3.2 eV, TiO₂ can be activated under UV light; thus, many strategies have been proposed to extend its photoabsorption to the visible light region. In what follows, this has generated increasing attention to study its characteristics and structural modifications in different forms for photocatalytic applications. The present review provides an insight into the understanding of the synthesis methods of TiO₂, the current progress in the treatment techniques for the degradation of wide environmental pollutants employing modified TiO₂ nanoparticles, and the factors affecting its photocatalytic activities. Further, recent developments in using titania for practical applications, the approach for designing novel nanomaterials, and the prospects and opportunities in this exciting area have been discussed.

Enhancement in Photocatalytic Efficiency of Commercial TiO2 Nanoparticles by Calcination: A Case of Doxycycline Removal

In this study, the pure and calcined forms of Degussa TiO2 were applied for photocatalytic removal of doxycycline - a broad-spectrum tetracycline antibiotic. The calcination of TiO2 at 500 °C enhanced the photocatalytic efficiency of the TiO2 under optimal operational conditions of 5 ppm of doxycycline, 0.25 g/L of TiO2, pH 6.5, 120 min, and room temperature. In addition, the changes in morphology, crystal structure, and optical properties of the materials before and after calcination were observed by scanning electron microscopy, X-ray diffraction, and UV-Visible spectroscopy. The reaction kinetics of the doxycycline removal was also investigated based on the Langmuir-Hinshelwood model with a correlation coefficient R2 of >80%. Results showed that the photocatalytic ability of TiO2 is stable and enhanced after being calcined at a suitable temperature of 500 °C. This opens up the potential application of TiO2 in the treatment of emerging organic pollutants in water. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Efficient One-Pot Synthesis of TiO2/ZrO2/SiO2 Ternary Nanocomposites Using Prunus × Yedoensis Leaf Extract for Enhanced Photocatalytic Dye Degradation

A simple, efficient, and ecofriendly method was employed to synthesize TiO2/ZrO2/SiO2 ternary nanocomposites using Prunus × yedoensis leaf extract (PYLE) that shows improved photocatalytic and antibacterial properties. The characterization of the obtained nanocomposites was done by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, field-emission scanning electron microscopy (FE-SEM), and energy-dispersive X-ray spectroscopic (EDS) analysis. The synthesized ternary nanocomposites with nanoscale pore diameters were investigated for the elimination of Reactive Red 120 (RR120) dye. The obtained results showed about 96.2% removal of RR120 dye from aqueous solution under sunlight irradiation. Furthermore, it shows promising antibacterial activity against Staphylococcus aureus and Escherichia coli. The improved photocatalytic and antibacterial activity of TiO2/ZrO2/SiO2 may bring unique insights into the production of ternary nanocomposites and their applications in the environment and biomedical field.

Sulfate radicals induced from peroxymonosulfate on electrochemically synthesized TiO2-MoO3 heterostructure with Ti-O-Mo bond charge transfer pathway for potential organic pollutant removal under solar light irradiation

Here, a novel method for synthesis of heterostructured TiO₂-MoO₃ (MT) nanosheets photocatalyst by utilizing a facile electrochemical method and examined it's photocatalytic activity by the degradation of tetracycline hydrochloride (TCH), a model of organic pollutants, in the presence of peroxymonosulfate (PMS) under solar light irradiation (SL) was reported for the first time. The influence of several factors on the degradation efficiency including the initial concentration of TCH, solution pH, catalyst dosage, PMS concentration, and the existence of inorganic anions was explored. The MT-15/PMS system displayed a promising photocatalytic performance and up to 97% of TCH was degraded in 90 min the rate of the degradation reaction of MT-15/PMS was the highest (0.05299 min^-1) compared to 0.00251, 0.00337, 0.00546, 0.00735, 0.01337min^-1of TiO₂-P25, TiO₂-P25/PMS, MoO₃, MoO₃/PMS, and MT-15 respectively. The enhancement can be attributed to several reasons. First, the 2D morphology of the optimized heterostructure photocatalyst plays a significant role in providing much more active sites on its surface. Next, the boosted light absorption efficiency and higher photoproduced electron-hole pair separation ability, induced by the unique direct transformation of photogenerated electrons from the valance band of TiO₂ to the conduction band of MoO₃ via the Ti-O-Mo bond formed at the interface of MT heterostructure. Finally, the appropriate accessible reactive sites for the activation of PMS together with the synergistic effect between activation of PMS and photocatalytic processes eased the production of active species for the degradation of pollutants. Based on the scavenger experiments and EPR analysis, hydroxide and sulfate radicals were found to be the dominant free radical active species in the degradation process. Furthermore, the synergistic degradation reaction mechanism was proposed.

Neurotoxicity of nanoparticles: Insight from studies in zebrafish

Nanoparticles are widely used in industry and personal care, and they inevitably end up in people's bodies and the environment. The widespread use of nanoparticles has raised new concerns about their neurotoxicity, as nanoparticles can enter the nervous system by blood-brain barrier. In neurotoxicity testing, the zebrafish provides powerful tools to overcome the limitations of other models. This paper will provide a comprehensive review of the power of zebrafish in neurotoxicity tests and the neurotoxic effects of nanoparticles, including inorganic, organic, and metal-based nanoparticles, on zebrafish from different perspectives. Such information can be used to predict not only the effects of nanoparticles on other species exposed to the aquatic environment but also the neurotoxicity of nanoparticles in humans.

Dye decomposition and air de-pollution performance of TiO2/SiO2 and N-TiO2/SiO2 photocatalysts coated on Portland cement mortar substates

In this study, the newly synthesized TiO₂ and N doped TiO₂ clusters were added to silica sol to synthesize N-TiO₂/SiO₂ composites via the sol-gel method. Afterwards, the prepared sols were applied by brushing on portland cement. Doping with nitrogen significantly increased the absorption of TiO₂ towards the visible region, thus, increasing the photocatalytic activity. SEM characterization of the treated samples showed that the clusters were distributed in form of aggregates on the samples' surface. The self-cleaning and air de-polluting performances were assessed through methylene blue degradation and the oxidation of nitrogen oxide, resulting in methylene blue (MB) removal of 85% and 78% after 60 min of irradiation for SN10TiO₂ and STiO₂, respectively. Regarding air de-pollution performance, the newly synthesized photocatalysts showed the ability of NOx reduction. However, their efficiency was somewhat lower, in which 23.81% of NO has been oxidized by the sample SN10TiO₂, while SP25 showed a total NO conversion of 38.98%. The powdered xerogels of the newly synthesized nanoparticles revealed high photocatalytic efficiency concerning NO oxidation, resulting in a higher performance compared to those obtained by the xerogel containing P25.

Preparation, Characterization, and Photocatalytic Performance of Ag/BiOBr0.85I0.15 Nanocomposites

In the present paper, a series of Ag/BiOBr_0.85I_0.15 composite nanoparticles with different silver loading were prepared by a combined solvothermal and photocatalytic reduction method. The composite samples have been characterized by XRD, XPS, SEM, EDX, TEM, UV-Vis, and N₂ adsorption/desorption techniques. The characterization results showed that BiOBr_0.85I_0.15 composite nanoparticles have a tetragonal phase structure. Silver nanoparticles are uniformly distributed on the BiOBr_0.85I_0.15, which results in surface plasmon resonance absorption, effectively increasing the visible light absorption ability of BiOBr_0.85I_0.15. The photocatalytic activity of the samples was evaluated by photocatalytic degradation of ammonia nitrogen in circulating aquaculture water under simulated sunlight irradiation. The effect of the Ag loading amount on the photocatalytic degradation of ammonia nitrogen was investigated. Silver loading of 1% (molar ratio) can effectively improve the degradation capacity of the catalyst for ammonia nitrogen in water. The recycling experiments show that 1%Ag/BiOBr_0.85I_0.15 has good photocatalytic stability. ESR characterization and oxidation species scavenging experimental results suggest that h⁺, ¹O₂, and ·O_2^- are the main oxidizing species in the photocatalytic system.

Catalytic Metasurfaces Empowered by Bound States in the Continuum

Photocatalytic platforms based on ultrathin reactive materials facilitate carrier transport and extraction but are typically restricted to a narrow set of materials and spectral operating ranges due to limited absorption and poor energy-tuning possibilities. Metasurfaces, a class of 2D artificial materials based on the electromagnetic design of nanophotonic resonators, allow optical absorption engineering for a wide range of materials. Moreover, tailored resonances in nanostructured materials enable strong absorption enhancement and thus carrier multiplication. Here, we develop an ultrathin catalytic metasurface platform that leverages the combination of loss-engineered substoichiometric titanium oxide (TiO_2-x) and the emerging physical concept of optical bound states in the continuum (BICs) to boost photocatalytic activity and provide broad spectral tunability. We demonstrate that our platform reaches the condition of critical light coupling in a TiO_2-x BIC metasurface, thus providing a general framework for maximizing light-matter interactions in diverse photocatalytic materials. This approach can avoid the long-standing drawbacks of many naturally occurring semiconductor-based ultrathin films applied in photocatalysis, such as poor spectral tunability and limited absorption manipulation. Our results are broadly applicable to fields beyond photocatalysis, including photovoltaics and photodetectors.

Fabrication of TiO2 ̶ KH550 ̶ PEG Super-Hydrophilic Coating on Glass Surface without UV/Plasma Treatment for Self-Cleaning and Anti-Fogging Applications

In this study, we have developed a self-cleaning transparent coating on a glass substrate by dip coating a TiO₂ – KH550 – PEG mixed solution with super-hydrophilicity and good antifogging properties. The fabrication of the thin-film-coated glass is a one-step solution blending method that is performed by depositing only one layer of modified TiO₂ nanoparticles at room temperature. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to determine the structure and morphology of the nanoparticles and the thin-film-coated glass. The surface functional groups were investigated using Fourier-transform infrared spectroscopy (FT-IR), and the optical properties of the glass coating were measured using a UV/Vis spectrometer. The results revealed that the KH-500-modified TiO₂ film coating was in an anatase crystalline form. The hydrophilicity of the coated and uncoated glass substrates was observed by measuring their water contact angle (WCA) using a contact angle instrument. The maximum transparency of the coated glass measured in the visible region (380–780 nm) was approximately 70%, and it possessed excellent super-hydrophilic properties (WCA ~0°) at an annealing temperature of 350 °C without further need of UV or plasma treatment. These results demonstrate the super-hydrophilic coated glass surface has potential for use in self-cleaning and anti-fogging applications.

Unveiling the distinctive role of titanium dioxide nanoparticles in aerobic sludge digestion

Aerobic digestion is considered to be a common process for the stabilization of waste activated sludge (WAS) in the small-sized wastewater treatment systems, while the broad application of titanium dioxide nanoparticles (TiO₂ NPs) results in their unavoidable existence in WAS aerobic digestion, with its role in aerobic sludge digestion being never documented. This study set up a series of aerobic sludge digesters to evaluate the previously unknown role of TiO₂ NPs on the performance of the digesters. The volatile solids (VS) degradation percentage increased from 21.9 ± 0.6% to 26.9 ± 0.1% - 30.0 ± 0.3% with the different contents of TiO₂ NPs (0, 1, 20 and 50 mg/L). Similarly, the total inorganic nitrogen production increased from 23.1 ± 0.3 to 31.0 ± 0.1 mg N/g VS with the rising TiO₂ NPs concentrations from 0 to 50 mg/L. The microbial analysis suggested that TiO₂ NPs contributed to the accumulation of specific microbes correlated with the degradation of organic substances and the conversion of nitrogen compounds. Model-based analysis showed the higher biodegradability and hydrolysis rate of sludge with TiO₂ NPs. Further mechanistic studies indicated that the enhancement of WAS solubilization and the degradation of recalcitrant substances (e.g., humic acid and cellulose) contributed to the better performance of experimental aerobic digesters, which was confirmed by the fourier transformation infrared spectroscopy (FTIR) indicating the converting of these materials into biodegradable substrates for digestion with TiO₂ NPs. It could be inferred from this investigation that aerobic digestion rather than anaerobic digestion would be a more suitable treatment method for sludge containing TiO₂ NPs.

Use of an Artificial Neural Network for Tensile Strength Prediction of Nano Titanium Dioxide Coated Cotton

In this study, an artificial neural network (ANN) is used for the prediction of tensile strength of nano titanium dioxide (TiO₂) coated cotton. The coating process was performed by ultraviolet (UV) radiations. Later on, a backpropagation ANN algorithm trained with Bayesian regularization was applied to predict the tensile strength. For a comparative study, ANN results were compared with traditional methods including multiple linear regression (MLR) and polynomial regression analysis (PRA). The input conditions for the experiment were dosage of TiO₂, UV irradiation time and temperature of the system. Simulation results elucidated that ANN model provides high performance accuracy than MLR and PRA. In addition, statistical analysis was also performed to check the significance of this study. The results show a strong correlation between predicted and measured tensile strength of nano TiO2-coated cotton with small error values.

Underestimated Properties of Nanosized Amorphous Titanium Dioxide

Titanium dioxide is one of the best described photosensitive materials used in photocatalysis, solar cells, self-cleaning coatings, and sunscreens. The scientific and industrial attention has been focused on the highly photoactive crystalline phase of titanium dioxide (TiO₂). It is commonly accepted that the smaller TiO₂ particles, the higher photoactivity they present. Therefore, titanium dioxide nanoparticles are massively produced and widely used in everyday products. The amorphous phase of titanium dioxide has been treated with neglect, as the lack of its photocatalytic properties is assumed in advance. In this work, the complex experimental proof of the UV-protective properties of the nano-sized amorphous TiO₂ phase is reported. Amorphous n-TiO₂ is characterized by photocatalytic inactivity and, as a consequence, low cytotoxicity to fibroblast cells. When exposed to UV radiation, cells with amorphous TiO₂ better survive under stress conditions. Thus, we postulate that amorphous n-TiO₂ will be more beneficial and completely safe for cosmetic applications. Moreover, the results from in situ FTIR studies let us correlate the low toxicity of amorphous samples with low ability to form hydroperoxo surface species.

Advances in preparation, mechanism and applications of graphene quantum dots/semiconductor composite photocatalysts: A review

Due to the low efficiency of single-component nano materials, there are more and more studies on high-efficiency composites. As zero dimensional (0D) non-metallic semiconductor material, the emergence of graphene quantum dots (GQDs) overcomes the shortcomings of traditional photocatalysts (rapid rate of electron-hole recombination and narrow range of optical response). Their uniqueness is that they can combine the advantages of quantum dots (rich functional groups at edge) and sp² carbon materials (large specific surface area). The inherent inert carbon stabilizes chemical and physical properties, and brings new breakthroughs to the development of benchmark photocatalysts. The photocatalytic efficiency of GQDs composite with semiconductor materials (SCs) can be improved by the following three points: (1) accelerating charge transfer, (2) extending light absorption range, (3) increasing active sites. The methods of preparation (bottom-up and top-down), types of heterojunctions, mechanisms of photocatalysis, and applications of GQDs/SCs (wastewater treatment, energy storage, gas sensing, UV detection, antibiosis and biomedicine) are comprehensively discussed. And it is hoped that this review can provide some guidance for the future research on of GQDs/SCs on photocatalysis.

TGF-β1/SMADs signaling involved in alleviating inflammation induced by nanoparticulate titanium dioxide in BV2 cells

There are increasing safety concerns accompanying the widespread use of nanoparticulate titanium dioxide (nano-TiO₂). It has been demonstrated that nano-TiO₂ can cross the blood-brain barrier and enter the brain, causing damage to the nervous system, consisting mainly of neuroinflammation and neuronal apoptosis. Several studies have linked the TGF-β1/SMADs signaling to the development of inflammatory response in various organs. However, no studies have connected the induction of microglial inflammation by nano-TiO₂ to this signaling. Therefore, this study aimed to investigate the role of TGF-β1/SMADs signaling in microglia inflammatory response induced by nano-TiO₂. The results showed that nano-TiO₂ increased the secretions of pro-inflammatory cytokines (IL-1α, IL-6, and TNF-α) and decreased the expressions of TGF-β1 and SMAD1/2/3 proteins in BV2 cells. When TGF-β1/SMADs signaling was inhibited, the inflammatory effect induced by nano-TiO₂ increased, suggesting a suppressive effect of this signaling on the inflammation. In addition, exogenous TGF-β1 upregulated the expressions of TGF-β1 and SMADs1/2/3 proteins as well as decreased the secretions of pro-inflammatory cytokines (IL-1α, IL-6, and TNF-α) compared to BV2 cells treated with only nano-TiO₂. Our results suggest that nano-TiO₂ may inhibit the TGF-β1/SMADs signaling by suppressing the intracellular secretion of active TGF-β1, leading to microglial activation and the induction or exacerbation of inflammatory responses.

Aerogels for Biomedical, Energy and Sensing Applications

The term aerogel is used for unique solid-state structures composed of three-dimensional (3D) interconnected networks filled with a huge amount of air. These air-filled pores enhance the physicochemical properties and the structural characteristics in macroscale as well as integrate typical characteristics of aerogels, e.g., low density, high porosity and some specific properties of their constituents. These characteristics equip aerogels for highly sensitive and highly selective sensing and energy materials, e.g., biosensors, gas sensors, pressure and strain sensors, supercapacitors, catalysts and ion batteries, etc. In recent years, considerable research efforts are devoted towards the applications of aerogels and promising results have been achieved and reported. In this thematic issue, ground-breaking and recent advances in the field of biomedical, energy and sensing are presented and discussed in detail. In addition, some other perspectives and recent challenges for the synthesis of high performance and low-cost aerogels and their applications are also summarized.

Robust Heterogeneous Photocatalyst for Visible-Light-Driven Hydrogen Evolution Promotion: Immobilization of a Fluorescein Dye-Encapsulated Metal-Organic Cage on TiO2

The design of artificial photocatalytic devices that simulates the ingenious and efficient photosynthetic systems in nature is promising. Herein, a metal-organic cage [Pd₆(NPyCzPF)₁₂]¹²⁺ (MOC-PC6) integrating 12 organic ligands NPyCzBP and 6 Pd²⁺ catalytic centers is designed, which is well defined to include organic dye fluorescein (FL) for constructing a supramolecular photochemical molecular device (SPMD) FL@MOC-PC6. Photoinduced electron transfer (PET) between MOC-PC6 and the encapsulated FL has been observed by steady-state and time-resolved emission spectroscopy. FL@MOC-PC6 is successfully heterogenized with TiO₂ by a facile sol-gel method to achieve a robust heterogeneous FL@MOC-PC6-TiO₂. The close proximity between the Pd²⁺ catalytic site and FL included in the cage enables PET from the photoexcited FL to Pd²⁺ sites through a powerful intramolecular pathway. The photocatalytic hydrogen production assessments of the optimized 4 wt % FL@MOC-PC6-TiO₂ demonstrate an initial H₂ production rate of 2402 μmol g^-1 h^-1 and a turnover number of 4356 within 40 h, enhanced by 15-fold over that of a homogeneous FL@MOC-PC6. The effect of the MOC content on photocatalytic H₂ evolution (PHE) is investigated and the inefficient comparison systems, such as MOC-PC6, MOC-PC6-TiO₂, FL-sensitized MOC-PC6/FL-TiO₂, and analogue FL/MOC-PC6-TiO₂ with free FL, are evaluated. This study provides a creative and distinctive approach for the design and preparation of novel heterogeneous SPMD catalysts based on MOCs.