A review of the application of sea material shells as low cost and effective bio-adsorbent for removal of heavy metals from wastewater

Animal waste as a valuable biosorbent in the removal of heavy metals from aquatic ecosystem-an eco-friendly approach

Toxic pollutants in the form of heavy metals are added through various anthropogenic activities daily into the aquatic ecosystem beyond their permissible limits, and their bioaccumulation capacity makes them hazardous substances for the survival of all organisms. Thus, their removal from aquatic ecosystems is the need of the hour. Treatment of wastewater containing heavy metals through biosorption is gaining popularity and is being explored all around the world due to its various advantages over conventional methods of treatment. Utilization of animal waste as a biomaterial could be the best solution to remove it from the ecosystem. Such treatment methods are a blessing for developing and underdeveloped countries due to their low cost. This paper provides in-depth details about heavy metals, their health implications, mechanisms of toxicity, modes of transportation, and conventional treatment approaches. A comprehensive understanding of the biosorption process, encompassing its world scenario, evolution, mechanisms, factors affecting the process, and advantages, will also be covered. Finally, animal wastes and their applicability in the removal of heavy metal pollutants from wastewater shall also be thoroughly reviewed, followed by their future utility and recommendations.

Biogenic calcium improved Cd2+ and Pb2+ immobilization in soil using the ureolytic bacteria Bacillus pasteurii

Bioremediation based on microbial-induced carbonate precipitation (MICP) was conducted in cadmium and lead contaminated soil to investigate the effects of MICP on Cd and Pb in soil. In this study, soil indigenous nitrogen was shown to induce MICP to stabilize heavy metals without inputting exogenous urea. The results showed that applying Bacillus pasteurii coupled with CaCl2 reduced Cd and Pb bioavailability, which could be clarified through the proportion of exchangeable Cd and Pb in soil decreasing by 23.65 % and 12.76 %, respectively. Moreover, B. pasteurii was combined separately with hydroxyapatite (HAP), eggshells (ES), and oyster shells (OS) to investigate their effects on soil heavy metals' chemical fractions, toxicity characteristic leaching procedure (TCLP)-extractable Cd and Pb as well as enzymatic activity. Results showed that applying B. pasteurii in soil significantly decreased the heavy metals in the exchangeable fraction and increased them in the carbonate phase fraction. When B. pasteurii was combined with ES and OS, the content of carbonate-bound Cd increased by 114.72 % and 118.81 %, respectively, significantly higher than when B. pasteurii was combined with HAP, wherein the fraction of carbonate-bound Cd increased by 86 %. The combination of B. pasteurii and biogenic calcium effectively reduced the leached contents of Cd and Pb in soil, and the TCLP-extractable Cd and Pb fractions decreased by 43.88 % and 30.66 %, respectively, in the BP + ES group and by 52.60 % and 41.77 %, respectively, in the BP + OS group. This proved that MICP reduced heavy metal bioavailability in the soil. Meanwhile, applying B. pasteurii and calcium materials significantly increased the soil urease enzyme activity. The microstructure and chemical composition of the soil samples were studied, and the results from scanning electron microscope, Fourier transform infra-red spectroscopy, and X-ray diffraction demonstrated the MICP process and identified the formation of CaCO3, Ca0.67Cd0.33CO3, and PbCO3 in heavy metal-contaminated soil.

Emerging environmentally friendly bio-based nanocomposites for the efficient removal of dyes and micropollutants from wastewater by adsorption: a comprehensive review

Water scarcity will worsen due to population growth, urbanization, and climate change. Addressing this issue requires developing energy-efficient and cost-effective water purification technologies. One approach is to use biomass to make bio-based materials (BBMs) with valuable attributes. This aligns with the goal of environmental conservation and waste management. Furthermore, the use of biomass is advantageous because it is readily available, economical, and has minimal secondary environmental impact. Biomass materials are ideal for water purification because they are abundant and contain important functional groups like hydroxyl, carboxyl, and amino groups. Functional groups are important for modifying and absorbing contaminants in water. Single-sourced biomass has limitations such as weak mechanical strength, limited adsorption capacity, and chemical instability. Investing in research and development is crucial for the development of efficient methods to produce BBMs and establish suitable water purification application models. This review covers BBM production, modification, functionalization, and their applications in wastewater treatment. These applications include oil-water separation, membrane filtration, micropollutant removal, and organic pollutant elimination. This review explores the production processes and properties of BBMs from biopolymers, highlighting their potential for water treatment applications. Furthermore, this review discusses the future prospects and challenges of developing BBMs for water treatment and usage. Finally, this review highlights the importance of BBMs in solving water purification challenges and encourages innovative solutions in this field.

Sponge-like biodegradable polypyrrole-modified biopolymers for selective adsorption of basic red 46 and crystal violet dyes from single and binary component systems

Recently, several researchers have been trying to reduce the ecological effects of water pollution by considering the use of biodegradable materials that prevent the generation of secondary pollution in our environment and enable water reuse. Here, new biodegradable hydrogels based on alginate (Alg), gelatin (Gel) and polypyrrole (PPy) were successfully implemented to remove two known highly toxic cationic dyes from wastewater. The design process was performed in two steps: in-situ polymerization of polypyrrole within the Alg/Gel mixture, followed by hydrogel formation. Biocomposites showed promising efficacy for the removal of both basic red 46 (BR46) and crystal violet (CV) dyes from real and demineralized water samples. However, Alg-Gel-PPy hydrogel showed better selectivity for BR46 than for CV as compared to the pristine Alg-Gel hydrogel. Adsorption of both pollutants on biocomposite hydrogel beads followed the Langmuir isotherm and pseudo-second order kinetic models. Besides, the highest adsorption capacities (125 mg g-1 for BR46 and 88.5 mg g-1 for CV) were obtained for the Alg-Gel-PPy hydrogel, compared with those determined for PPy-free hydrogel (103.09 mg g-1 for BR46 and 86.96 mg g-1 for CV) and remained at a satisfactory level for five adsorption-desorption cycles. Finally, the obtained hydrogels showed excellent biodegradability by natural soil microorganisms, with 91 % decomposition.

Photocatalytic evaluation of synthesized MnO2/Fe3O4 NCs by Q. infectoria extract for removal Ni(II) and phenol: Study phytochemical, kinetics, thermodynamics, and antibioactivity

In the present study, the plant extract of the Quercus infectoria galls was used as a reducing, capping, and stabilizer agent for green synthesized MnO2 nanoparticles (NPs) and MnO2/Fe3O4 nanocomposites (NCs) due to its reduction ability from polyphenol and antioxidant content. The green synthesized nanomaterials have been characterized by various techniques such as FTIR, UV-vis, XRD, SEM, EDS, and TEM. The average size of about 7.4 and 6.88 nm was estimated for the NCs crystals of SEM images and XRD analysis by the Scherrer and Williamson-Hall methods. The green synthesized MnO2/Fe3O4 NCs (dosage: 0.1 g) have shown high photocatalytic activity for the removal of Ni(II) in acidic and basic solutions under visible irradiation (220 V lamp). The removal efficiency for the Ni(II) solution (3.6 × 10-3 M) at pH = 3 was increased to pH = 12 from 56 % to 98 %. The oxidase-like activity of MnO2/Fe3O4 NCs at different dosages (0.05, 0.1, and 0.15 g) for the removal and colorimetric of phenol (1 g/40 mL) in the presence 4-AAp (1 g) was seen after only 28, 13, and 5 s, respectively. The kinetic evaluation results showed the pseudo-second-order kinetics model closely matched the adsorption capacity theoretical values qe,cal (578.03, 854.70, 892.85, and 917.43 mg.g-1) and experimental values qe,exp (521.84, 839.74, 887.86, and 913.22 mg.g-1) at different initial pH solution (3-12) for Ni(II) removal. In addition, the investigation of isotherm models revealed that the Langmuir model (R2 = 0.9955) explains a better estimate for a monolayer and favorable removal of Ni(II) ions onto NCs. Also, the low Temkin constant, BT < 0 (0.0200 kJ.mol-1), and positive ∆H° value (0.103 kJ.mol-1.K-1) illustrated that Ni(II) removal is physical sorption and endothermic process. However, the obtained thermodynamic results showed the negative values ΔG° with the increase in temperature (303-318 K) toward a spontaneous removal process of Ni(II). Finally, the plant antioxidant (200 to 3200 μg/mL) and antimicrobial activities (0.001 to 0.1 g/mL) for plant extract, MnO2 NPs, and MnO2/Fe3O4 NCs were evaluated against Gram-positive and Gram-negative bacteria species.

A critical review on selenium removal capacity from water using emerging non-conventional biosorbents

Anthropogenic-driven selenium (Se) contamination of natural waters has emerged as severe health and environmental concern. Lowering Se levels to safe limits of 40 μg-L-1 (recommended by WHO) presents a critical challenge for the scientific community, necessitating reliable and effective methods for Se removal. The primary obectives of this review are to evaluate the efficiency of different biosorbents in removing Se, understand the mechanism of adsorption, and identify the factors influencing the biosorption process. A comprehensive literature review is conducted to analyze various studies that have explored the use of modified biochars, iron oxides, and other non-conventional biosorbents for selenium removal. The assessed biosorbents include biomass, microalgae-based, alginate compounds, peats, chitosan, and biochar/modified biochar-based adsorbents. Quantitative data from the selected studies analyzed Se adsorption capacities of biosorbents, were collected considering pH, temperature, and environmental conditions, while highlighting advantages and limitations. The role of iron impregnation in enhancing the biosorption efficiency is investigated, and the mechanisms of Se adsorption on these biosorbents at different pH levels are discussed. A critical literature assessment reveals a robust understanding of the current state of Se biosorption and the effectiveness of non-conventional biosorbents for Se removal, providing crucial information for further research and practical applications in water treatment processes. By understanding the strengths and limitations of various biosorbents, this review is expected to scale-up targeted research on Se removal, promoting the development of innovative and cost-effective adsorbents, efficient and sustainable approaches for Se removal from water.

Amino-carboxyl cellulose for adsorption of Cd2+ and Pb2

An amino-carboxyl cellulose was synthesized using the grafting of glycine on the aldehyde cellulose through a Schiff base reaction for the adsorption of heavy metals with Cd2+ and Pb2+ as the representative. Higher affinity of the amino-carboxyl cellulose was found at pH 4.5-5.0 for Cd2+ and 4.0-5.5 for Pb2+. The equilibrium was achieved within 30 min. The adsorption capacities of amino-carboxyl cellulose (Cd2+: 85.7 mg g-1, Pb2+: 115.1 mg g-1, Cu2+: 68.2 mg g-1, Co2+: 60.1 mg g-1, Ni2+ 48.5 mg g-1 and Zn2+: 52.8 mg g-1) at 30 °C were observed. A mild increase in the adsorption capacities of Cd2+ and Pb2+ from 15 to 45 °C was observed. Adsorption data correlated well with the Langmuir and pseudo-second order equations, illustrating chemisorption of Cd2+ and Pb2+ by the amino-carboxyl cellulose. The adsorption of the amino-carboxyl cellulose for Cd2+ and Pb2+ was a spontaneous and endothermic. The amino-carboxyl cellulose owned a high reusability after 4 cycles.

Understanding Snail Mucus Biosynthesis and Shell Biomineralisation through Genomic Data Mining of the Reconstructed Carbohydrate and Glycan Metabolic Pathways of the Giant African Snail (Achatina fulica)

The giant African snail (Order Stylommatophora: Family Achatinidae), Achatina fulica (Bowdich, 1822), is the most significant and invasive land snail pest. The ecological adaptability of this snail involves high growth rate, reproductive capacity, and shell and mucus production, driven by several biochemical processes and metabolism. The available genomic information for A. fulica provides excellent opportunities to hinder the underlying processes of adaptation, mainly carbohydrate and glycan metabolic pathways toward the shell and mucus formation. The authors analysed the 1.78 Gb draft genomic contigs of A. fulica to identify enzyme-coding genes and reconstruct biochemical pathways related to the carbohydrate and glycan metabolism using a designed bioinformatic workflow. Three hundred and seventy-seven enzymes involved in the carbohydrate and glycan metabolic pathways were identified based on the KEGG pathway reference in combination with protein sequence comparison, structural analysis, and manual curation. Fourteen complete pathways of carbohydrate metabolism and seven complete pathways of glycan metabolism supported the nutrient acquisition and production of the mucus proteoglycans. Increased copy numbers of amylases, cellulases, and chitinases highlighted the snail advantage in food consumption and fast growth rate. The ascorbate biosynthesis pathway identified from the carbohydrate metabolic pathways of A. fulica was involved in the shell biomineralisation process in association with the collagen protein network, carbonic anhydrases, tyrosinases, and several ion transporters. Thus, our bioinformatic workflow was able to reconstruct carbohydrate metabolism, mucus biosynthesis, and shell biomineralisation pathways from the A. fulica genome and transcriptome data. These findings could reveal several evolutionary advantages of the A. fulica snail, and will benefit the discovery of valuable enzymes for industrial and medical applications.

Overview of structure, function and integrated utilization of marine shell

Marine shell resources have received great attention from researchers owing to their unique merits such as high hardness, good toughness, corrosion resistance, high adsorption, and bioactivity. Restricted by the level of comprehensive utilization technology, the utilization rate of shells is extremely low, resulting in serious waste and pollution. The research shows that the unique brick-mud structure of shells makes them have diverse and good functional characteristics, which guides them to have great utilization potential in different fields. Hence, this review highlights the constitutive relationship between microstructure-function-application of shells (e.g., gastropods, cephalopods, and amniotes), and the comprehensive applications and development ideas in the fields of biomedicine, adsorption enrichment, pHotocatalysis, marine carbon sink, and environmental deicer. It is worth mentioning that marine shells are currently well developed in three areas: bone repair, health care and medicinal value, and drug carrier, which together promote the progress of biomedical field. In addition, an in-depth summary of the application of marine shells in the adsorption and purification of various impurities such as crude oil, heavy metal ions and dyes at low-cost and high efficiency is presented. Finally, by integrating thoughts and approaches from different applications, we are committed to providing new pathways for the excavation and future high-value of shell resources, clarifying the existing development stages and bottlenecks, promoting the development of related technology industries, and achieving the synergistic win-win situation of economic and environmental benefits.

Simultaneous removal of multiple heavy metals using single chamber microbial electrolysis cells with biocathode in the micro-aerobic environment

The simultaneous and efficient removal of various heavy metals from wastewater to satisfy the requirements of zero discharge has been a research hotspot and difficult point. In the laboratory scale (0.5 L), the biocathode microbial electrolytic cells (BCMECs) were constructed with the pre-screened heavy metal-tolerant electroactive bacterial, mainly of the Sphingomonas, Azospira and Cupriavidus. The BCMECs system showed a more satisfactory removal effect for multiple heavy metals and organic pollutants. At the auxiliary voltage of 0.9 V and initial concentration of 20 mg L^-1, the removal efficiency of Cu, Pb, Zn, Cd and COD were 98.76 ± 0.32%, 98.01 ± 0.76%, 73.58 ± 4.83%, 84.39 ± 5.95%, 77.55 ± 1.51%, respectively. It was found by various characterization techniques (CV, EIS, XPS et al.) that the constructed biocathode has the function of electrocatalytic reduction of heavy metal ions in a micro-aerobic, film-free environment. The positive shift (0.030-0.229 V) of the initial potential for heavy metal reduction and the absence of a significant increase (＜ 10 Ω) in the interfacial resistance indicated a reduction in the total free energy of the reduction reaction, which promotes the reaction and improves the efficiency of heavy metal removal. Bacterial community analysis revealed that the Proteobacteria has been dominant in different heavy metal environments. With the increase of heavy metal concentration, Sphingomonas, Azospira and Cupriavidus showed stronger tolerance and became the dominant genus. This study emphasized the important performance of biocathodes and the effective treatment of heavy metal wastewaters by BCMECs and provided a reasonable way for industrial and mining enterprises to innovate the water treatment process.

Characterization of the cross-lamellar structure of Olivancillaria urceus (Gastropoda: Olividae) and its dissolution pattern

In this work, we sought to characterize the cross-lamellar microstructure of the gastropod Olivancillaria urceus (Röding, 1798) and its profile after immersion in acid medium. For crystallographic analysis, segments of the valve were removed and crushed. The powder obtained was analyzed using Fourier Transform Infrared Spectroscopy with Attenuated Total Reflectance (FTIR-ATR) and X-ray Diffractometry (XRD) techniques. For microstructural analysis, eight sections were taken from the shell using a rotary saw. The face of interest of each section was polished with Saint Gobain silicon carbide abrasive powder with mesh sizes of 320, 500, 600, and 1000. The eight sections were divided into four groups of two samples. Three groups were left in 4 % glacial acetic acid solution diluted in water for intervals of 20, 40, and 60 min, respectively, and the control group was not degraded. All wafers were then analyzed in Scanning Electron Microscopy to ascertain the microstructure. The angle and thickness of the layers were determined by Image J software. As a result of the FTIR-ATR technique, a transmittance spectrum was obtained whose valleys represent the vibrational modes of the carbonate ion. The diffractogram peaks and their respective Miller indices, are characteristic of the aragonite crystallographic structure and a small fraction of calcite. The micrographs obtained exposed 3 layers of cross-lamellar microstructure, however, the third and innermost layer showed discontinuity. The angle and average thickness were (105 ± 2)° and (727 ± 5)µm for the outermost layer and (116 ± 3)° and (668 ± 6)µm for the middle layer. The tablets immersed in acid medium showed loss of orientation of the calcium carbonate grains after 40 min and 60 min. Thus, the O. urceus shell exhibits orthorhombic calcium carbonate crystallography. Three layers of cross-lamellar microstructure were identified, as well as the configuration of the structure after contact with corrosive media. These results contribute to the characterization of natural materials and serve as a basis for analysis of the preservation potential in the fossil record.

A novel and capable supported phenylazophenylenediamine-based nano-adsorbent for removal of the Pb, Cd, and Ni ions from aqueous solutions

Herein, we report the synthesis and characterization of chrysoidine (4-phenylazo-m-phenylenediamine) grafted on magnetic nanoparticles (Fe₃O₄@SiO₂@CPTMS@PhAzPhDA = FeSiPAPDA) as a novel and versatile adsorbent used for the satisfactory removal of Pb, Ni, and Cd ions from contaminated water via the formation of their complexes. The Freundlich, Langmuir, Temkin, and Redlich-Patterson isotherm models were studied to reveal the adsorption capability of the adsorbent and were found out that the Langmuir model is more compatible with the nano-adsorbent behavior. Moreover, according to the ICP tests as well as based on the Langmuir isotherm, the maximum adsorption capacity of the FeSiPAPDA-based adsorbent for the Pb ions (97.58) is more than that of Cd (78.59) and Ni ions (64.03).

The effective removal of Ni2+, Cd2+, and Pb2+ from aqueous solution by adenine-based nano-adsorbent

The presence of heavy metal ions in drinking and wastewater generates environmental and human health concerns as they are known as cumulative poisons. Therefore, the purification of contaminated waters is an important ecological issue. Various techniques have been developed to address this issue, where adsorption has received widespread attention. The facile synthesis of effective adenine-based nano-adsorbents is reported and adsorptive removal of Ni²⁺, Cd²⁺, and Pb²⁺ from aqueous media was investigated by inductively-coupled plasma analyses, adsorption isotherms, kinetics, and thermodynamic studies. The effects of pH, adsorbent dose, contact time, and temperature were optimized. The maximum adsorption capacity was achieved at pH = 7, an adsorbent dose of 25 mg, and an initial concentration of 50 mg L^-1 at 25 °C. A thermodynamic study showed that adsorption is an endothermic process, and the Langmuir model fitted well to the ion adsorption data to reveal that the maximum adsorption capacities for Ni²⁺, Cd²⁺, and Pb²⁺ were 273.7, 252.4, and 249.8 mg g^-1, respectively.

Fabrication of sodium alginate-melamine@ZIF-67 composite hydrogel and its adsorption application for Pb(II) in wastewater

A low-cost and environmental-friendly sodium alginate-melamine@zeolitic imidazolate framework-67 (SA-ME@ZIF-67) adsorbent was fabricated by chemical grafting and in situ growth for the removal of lead ions in wastewater. Firstly, melamine (ME) was grafted onto sodium alginate (SA) by amide reaction, and then SA-ME was dropped into a solution of calcium chloride to form hydrogel bead, and ZIF-67 was grown on the SA-ME hydrogel bead by the in situ growth method. The SA-ME@ZIF-67 adsorbent was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The SA-ME@ZIF-67 adsorbent was used to effectively adsorb Pb(II) from aqueous solutions. The initial concentrations of lead ions, adsorbent dose, initial pH of lead ion solution, temperature, and adsorption time for the material were optimized. The adsorption isotherms and kinetics fitted to Langmuir isotherm model (R² = 0.9281, 0.9420, and 0.9623 at the temperatures of 288.15 K, 298.15 K, and 308.15 K, respectively) and pseudo-second-order kinetic model (R² = 0.9901) respectively. According to the Langmuir model at 308.15 K, the maximum adsorption capacity of the adsorbent for Pb(II) was 634.99 mg/g. The recycling application of the adsorbent was possible as it was easily collected and reused after five adsorption-regeneration cycles. In addition, the Pb(II) in real wastewater samples has been efficiently removed using the fabricated hydrogel. The results showed that the SA-ME@ZIF-67 adsorbent had high adsorption capacity, removal efficiency, and easy recyclability for Pb(II).

A Critical Review of Snail Shell Material Modification for Applications in Wastewater Treatment

Sea material is becoming increasingly popular and widely used as an adsorbent in wastewater treatment. Snail shell, a low-cost and natural animal waste material, has been shown to have a high calcium content (>99%) and a large potential surface area for the development of sustainable adsorbents. This paper presents a novel synthesis of methods for using snail shell absorbent materials in the treatment of wastewater containing heavy metals, textile dyes, and other organic substances. Modified biochar made from snail shells has gained popularity in recent years due to its numerous benefits. This paper discusses and analyzes modification methods, including impregnating with supplements, combining other adsorbents, synthesis of hydroxyapatite, co-precipitation, and the sol-gel method. The analysis of factors influencing adsorption efficiency revealed that pH, contact time, temperature, initial concentration, and adsorbent dose all have a significant impact on the adsorption process. Future research directions are also discussed in this paper as a result of presenting challenges for current snail adsorbents.

Experimental Study on the Tridacna squamosa Shell: Distinctive Structure and Mechanical Behavior

Tridacna squamosa, Lamarck, 1819 (Bivalvia Cardiida Cardiidae, known as the fluted giant clam) is one of the largest-sized bivalve shells, which is equipped with a strong and tough bioceramic shell to effectively protect itself from the attack of predators. To better understand the mechanical defense mechanism, the relationship between the microstructure, composition, and mechanical properties of the Tridacna squamosa shell was investigated. We find that the Tridacna squamosa shell is composed of aragonite CaCO₃ and a small portion of organic matter, which are well-arranged, assembling a multiscale, inhomogeneous, and anisotropic structure. Three levels of microstructure units are identified, including the smallest aragonite rods, medium sheets, and block-like lamellae. Such multiscale structures are the main contributor to creating abundant fracture surfaces much larger than the case for single mineral components, leading to multiple toughening mechanisms observed in Vickers indentation experiments, such as pulled-out of mineral platelet and crack deflection. The material inhomogeneity in the cross-sectional direction indicates that the material is stronger at the inner layer than that at the outer layer, which also facilitates an effective defense against the predator attack. This study may provide insights into the design of biomaterials with the desired mechanical properties.

Design of biomass-based renewable materials for environmental remediation

Various materials have been used to remove environmental contaminants for decades and have been an effective strategy for environmental cleanups. The current nonrenewable materials used for this purpose could impose secondary hazards and challenges in further downstream treatments. Biomass-based materials present viable, renewable, and sustainable solutions for environmental remediation. Recent biotechnology advances have developed biomaterials with new capacities, such as highly efficient biodegradation and treatment train integration. This review systemically discusses how biotechnology has empowered biomass-derived and bioinspired materials for environmental remediation sustainably and cost-effectively.

A review of the application of fungi as an effective and attractive bio-adsorbent for biosorption of heavy metals from wastewater

One of the most hazardous environmental pollutants is the pollution risen by heavy metal ions in effluents, which is increasing due to the increasing human activity and the development of urbanization. Notwithstanding the economic challenges to control the pollution of effluent treatment processes, it seems necessary to provide effective approaches. The sorption method is widely used due to low-cost, flexibility in design and operation, repeatability, and significant performance. Hence, the need for more environmentally friendly sorbents to eliminate metal ions is greater than ever. Due to the unique features such as the presence of chitin and chitosan in the cell wall, high absorption capacity, environmental friendliness, availability, and cheapness, the use of fungi as adsorbent has received much attention. Therefore, this work tries to address the use of fungi as biosorbents to remove these metals, the dangers of heavy metals, and their sources. Moreover, equilibrium, kinetic, and thermodynamic behaviors of the heavy metal ion adsorption process in the literature are briefly studied.

Remediation of heavy metal polluted waters using activated carbon from lignocellulosic biomass: An update of recent trends

The use of a cheap and effective adsorption approach based on biomass-activated carbon (AC) to remediate heavy metal contamination is clearly desirable for developing countries that are economically disadvantaged yet have abundant biomass. Therefore, this review provides an update of recent works utilizing biomass waste-AC to adsorb commonly-encountered adsorbates like Cr, Pb, Cu, Cd, Hg, and As. Various biomass wastes were employed in synthesizing AC via two-steps processing; oxygen-free carbonization followed by activation. In recent works related to the activation step, the microwave technique is growing in popularity compared to the more conventional physical/chemical activation method because the microwave technique can ensure a more uniform energy distribution in the solid adsorbent, resulting in enhanced surface area. Nonetheless, chemical activation is still generally preferred for its ease of operation, lower cost, and shorter preparation time. Several mechanisms related to heavy metal adsorption on biomass wastes-AC were also discussed in detail, such as (i) - physical adsorption/deposition of metals, (ii) - ion-exchange between protonated oxygen-containing functional groups (-OH, -COOH) and divalent metal cations (M²⁺), (iii) - electrostatic interaction between oppositely-charged ions, (iv) - surface complexation between functional groups (-OH, O^2-, -CO-NH-, and -COOH) and heavy metal ions/complexes, and (v) - precipitation/co-precipitation technique. Additionally, key parameters affecting the adsorption performance were scrutinized. In general, this review offers a comprehensive insight into the production of AC from lignocellulosic biomass and its application in treating heavy metals-polluted water, showing that biomass-originated AC could bring great benefits to the environment, economy, and sustainability.

Sustainable environmental remediation via biomimetic multifunctional lignocellulosic nano-framework

Chemical pollution threatens human health and ecosystem sustainability. Persistent organic pollutants (POPs) like per- and polyfluoroalkyl substances (PFAS) are expensive to clean up once emitted. Innovative and synergistic strategies are urgently needed, yet process integration and cost-effectiveness remain challenging. An in-situ PFAS remediation system is developed to employ a plant-derived biomimetic nano-framework to achieve highly efficient adsorption and subsequent fungal biotransformation synergistically. The multiple component framework is presented as Renewable Artificial Plant for In-situ Microbial Environmental Remediation (RAPIMER). RAPIMER exhibits high adsorption capacity for the PFAS compounds and diverse adsorption capability toward co-contaminants. Subsequently, RAPIMER provides the substrates and contaminants for in situ bioremediation via fungus Irpex lacteus and promotes PFAS detoxification. RAPIMER arises from cheap lignocellulosic sources, enabling a broader impact on sustainability and a means for low-cost pollutant remediation.

Persistent organic pollutant (POP) remediation is important for protecting the environment and human health but can be expensive. Here, the authors report on the creation of a plant-based remediation material which can absorb high levels of POPs and then provide the nutrients needed for fungal degradation and detoxification.

Facile preparation of sisal-Fe/Zn layered double hydroxide bio-nanocomposites for the efficient removal of rifampin from aqueous solution: kinetic, equilibrium, and thermodynamic studies

In the present study, sisal-Fe/Zn LDH bio-nanocomposite for efficiently removing rifampin was synthesized using a simple co-precipitation method. SEM, XRD, and FTIR analyses were applied to characterize the prepared composite. In the following, different factors that are affecting the adsorption of rifampin, including contact time, initial rifampin concentration, adsorbent dosage, and temperature were evaluated. Also, the kinetic, isotherm, and thermodynamic studies were investigated. The results indicated that Freundlich (R² = 0.9976) was a suitable model for describing the adsorption equilibrium and adsorption kinetic showed that the data are in maximum agreement with the pseudo-second-order kinetic model (R² = 0.9931). According to the Langmuir isotherm model, the maximum adsorption capacity of rifampin was found to be 40.00 mg/g. The main mechanisms for rifampin elimination were introduced as electrostatic attraction and physical adsorption. Moreover, the spontaneity and nature of the reaction were analyzed by elucidating thermodynamic factors that indicated the adsorption process was exothermic and spontaneous. Also, the batch process design indicated that for treating 10 L wastewater containing 100 mg/L rifampin with a removal efficiency of 96%, the needed amount of sisal-Fe/Zn LDH is 51.6 g. This study revealed that the sisal-Fe/Zn LDH bio-nanocomposites as a low-cost adsorbent have promising adsorption potential.

Low-Cost RSAC and Adsorption Characteristics in the Removal of Copper Ions from Wastewater

Adsorption is a typical method for treating copper-containing wastewater. Fly ash and steel slag both have a good adsorption performance, and activated clay is added in this study, too. In this study, the performance of residue and soil adsorption composite (RSAC) particles for copper ion adsorption was discussed through the substrate ratio and the influence mechanism, to achieve the win–win effect of industrial waste reuse and copper ion wastewater treatment. The results indicated that adsorption time, dosage, initial copper ion concentration, coexisting ions, and temperature showed different effects on the adsorption, respectively. Additionally, the adsorption kinetic study showed the removal of copper ions by adsorption of RSAC particles was in accordance with quasi-primary kinetic model and quasi-secondary kinetic model. The adsorption thermodynamics study shows the adsorption process of ΔG0 < 0, ΔH0 > 0 and ΔS0 > 0, indicating that the process of copper ion adsorption by RSAC particles was spontaneous, heat-absorbing, and entropy-increasing. The research demonstrates that RSAC particles have a certain adsorption capacity for copper ion.

Adsorption kinetics and isotherms of binary metal ion aqueous solution using untreated venus shell

Among available technologies to remove heavy metals from wastewater, biosorption has gained more attention due to its high removal efficiency, friendly operation, and inexpensive cost. Despite many studies on metal adsorption from single ion solutions, kinetics and isotherms of binary metal ions simultaneously adsorbed onto biosorbents have not been thoroughly investigated to provide insight on involving mechanisms. This study explored the adsorption potential of untreated venus shells (UVS) that can be utilized in economical and environmentally-friendly ways. In this work, UVS of different sizes were prepared without chemical treatment as a biosorbent. Characterization of UVS was accomplished using nitrogen adsorption isotherm, FTIR, and SEM-EDX. Batch adsorption was carried out to study the effect of initial metal ion concentration, adsorbent dosage, and size on removing Cu(II) and Zn(II) from a binary solution of both metal ions using UVS. The experimental values of maximum adsorption capacities of Cu(II) and Zn(II) were 0.446 and 0.465 mg/g, respectively. The adsorption data were analyzed using the pseudo-first order, pseudo-second order, Elovich, and intraparticle diffusion rate equations. The pseudo-second order and the intraparticle diffusion model yielded the best fit to the experimental data for Cu(II) and Zn(II) ions, respectively. The equilibrium isotherm was examined using the Langmuir, Freundlich, Temkin, Dubinin–Radushkevich (D–R), and Elovich models. The Freundlich model best fits the Cu(II) and Zn(II) equilibrium adsorption data. The results indicated that the adsorption of Cu(II) and Zn(II) onto UVS-600 adsorbent could undergo a chemisorption mechanism. Both metal ions in an aqueous solution were competitively adsorbed onto the heterogeneous active sites available on the shell surfaces. Cu(II) and Zn(II) ions in the binary system could result in ionic interference between the adsorbed ions and the active sites.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Design, Synthesis and Adsorption Evaluation of Bio-Based Lignin/Chitosan Beads for Congo Red Removal

The morphology and intermolecular interaction are two of the most important factors in the design of highly efficient dye adsorbent in the industry. Millimeter-sized, bead-type, bio-based lignin/chitosan (Lig/CS) adsorbent was designed for the removal of Congo red (CR), based on the electrostatic attraction, π-π stacking, and hydrogen bonding, which were synthesized through the emulsification of the chitosan/lignin mixture followed by chemical cross-linking. The effects of the lignin/chitosan mass ratio, initial pH, temperature, concentration, and contact time on the adsorption were thoroughly investigated. The highest adsorption capacity (173 mg/g) was obtained for the 20 wt% Lig/CS beads, with a removal rate of 86.5%. To investigate the adsorption mechanism and recyclability, an evaluation of the kinetic model and an adsorption/desorption experiment were conducted. The adsorption of CR on Lig/CS beads followed the type 1 pseudo-second-order model, and the removal rate for CR was still above 90% at five cycles.

Assessment of Corrosion Performance of Steel Rebar in Snail Shell Ash Blended Cements under Marine Environments

An attempt has been made on a constructive approach to evaluate the performance of snail shell ash (SSA) for its corrosion performance under marine environments. Corrosion performance of steel rebar in chloride-contaminated SSA with (0% to 50%) replacement levels of cement extract medium was examined through electrochemical and weight loss techniques. Initially, snail shell powder (SSP) is made by pulverizing and subsequently SSA is by thermal decomposition methods. Both SSP and SSA were characterized by X-ray diffraction, Fourier transforms infrared spectroscopy, scanning electron microscopy, and energy dispersion X-ray spectroscopy. Concrete cubes with 0% to 50% replacement levels of cement by SSA were evaluated for their mechanical properties. A critical level of 20 to 30% SSA improved both corrosion resistance and strength of concrete. Extrapolation modeling for the strength and corrosion rate with respect to later age were made. SSA is a suitable replacement material for natural limestone in cement productions.

Attapulgite and processed oyster shell powder effectively reduce cadmium accumulation in grains of rice growing in a contaminated acidic paddy field

Heavy-metal contamination is widespread in agricultural soils worldwide, especially paddy soils contaminated by Cd. Amendment-induced immobilization of heavy metals is an attractive and effective technique, provided that cost-effective materials are used. This field experiment compared three alkaline passivators (attapulgite, processed oyster shell powder, and mixed soil conditioner) at a rate of 2.25 t ha^-1 for their effectiveness in decreasing Cd bioavailability in soils and accumulation in rice plants in a paddy field contaminated by Cd (0.38 Cd mg kg^-1). The utilization of attapulgite and processed oyster shell powder decreased labile fractions but increased stable fractions of Cd in soils through ion exchange, precipitation and complexation. The addition of attapulgite decreased the concentration of bioavailable Cd in both bulk and rhizosphere soils, whereas the amendment of processed oyster shell powder decreased it only in bulk soil. The Cd accumulation in rice plants correlated significantly with acid-soluble and residual Cd fractions in the rhizosphere soil but not in the bulk soil. The addition of attapulgite and processed oyster shell powder decreased Cd accumulation in rice grains from 0.26 mg kg^-1 to 0.14 and 0.19 mg kg^-1, respectively, meeting the National Food Safety Standard (< 0.20 mg kg^-1). However, the mixed soil conditioner did not decrease the Cd accumulation in rice shoots or grains. This study demonstrated that attapulgite and processed oyster shell powder were economic agents in reducing Cd accumulation in rice grains.

Aminophosphonic Acid Functionalized Cellulose Nanofibers for Efficient Extraction of Trace Metal Ions

Cellulose nanofibers were covalently functionalized using diethylenetriamine penta (methylene phosphonic acid) and studied for the extraction of heavy metal ions. The surface-functionalized nanofibers showed a high adsorption capacity towards heavy metal ions as compared to bare nanofibers. The elemental composition and surface morphology of the prepared bio-adsorbent was characterized by X-ray photoelectron spectroscopy, attenuated total reflectance infrared spectroscopy, field emission scanning electron microscopy, and energy dispersive spectroscopy. The prepared material was studied to develop a column-based solid phase extraction method for the preconcentration of trace metal ions and their determination by inductively coupled plasma optical emission spectroscopy. The batch experimental data was well fitted to Langmuir adsorption isotherms (R2 > 0.99) and follows pseudo-second-order kinetics. The experimental variables such as sample pH, equilibrium time, column breakthrough, sorption flow rate, the effect of coexisting ions, and eluent type were systematically studied and optimized accordingly. The detection limit of the proposed method was found to be 0.03, 0.05, and 0.04 µg L-1 for Cu(II), Pb(II), and Cd(II), respectively. Certified Reference Materials were analyzed to validate the proposed method against systematic and constant errors. At a 95% confidence level, the Student's t-test values were less than the critical Student's t value (4.302). The developed method was successfully employed for the preconcentration and determination of trace metal ions from real water samples such as river water and industrial effluent.

Microstructure Analysis and Chemical and Mechanical Characterization of the Shells of Three Freshwater Snails

The shells of freshwater snails are discarded as waste, which qualify as biological materials with prospective multiple uses. To substantiate this proposition, an attempt was made to elucidate the physical and chemical properties of the shells of three freshwater snails, namely, Bellamya bengalensis, Pila globosa, and Brotia costula. The shells were prepared for electron microscopy and assessment of the calcium carbonate content, apart from the Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), and nanoindentation studies. The results indicated that the calcium carbonate content (y) of the shells ranged between 87 and 96% of the total weight (x) and complied with a power regression equation: y = 0.801x 1.016; R 2 = 0.994; r = +0.998; P < 0.001. Observations through SEM depicted different snail species-specific arrangement patterns of calcium carbonate crystals in the diverse layers of shells. The XRD, FTIR, and EDS observations revealed the dominance of the aragonite form of the calcium carbonate crystal in the microstructures of each snail shell with the occurrence of different shell surface functional groups. The Brunauer-Emmett-Teller analysis elucidated the surface textures of shell dust taken from each snail species; in addition, the nanohardness properties indicate the shells as a tough biocomposite exoskeleton. Species-specific variations in the shell morphology, microstructure, and calcium carbonate content were prominent for the three freshwater snails considered for the study. Nonetheless, the physical and chemical properties substantiate that the shells of B. bengalensis, P. globosa, and B. costula qualify as biological materials for sustainable use in various fields including bioremediation, biocatalyst, biomedical applications, and a source of lime. Since the shells of the freshwater snails are discarded as aquaculture waste, subsequent use as a biological material will support the "waste made useful" paradigm in sustainability, both from ecological and economic perspectives.

An insight into the structure, composition and hardness of a biological material: the shell of freshwater mussels

The shell of the freshwater mussel (Mollusca: Bivalvia) is a composite biological material linked with multifunctional roles in sustaining ecosystem services. Apart from providing mechanical strength and support, the shell is an important site for adherence and growth of multiple types of algae and periphyton. Variations in the shell architecture are observed in the mussels both within a species and among different species. Considering the prospective utility of the shell of the freshwater mussels as a biological material, an assessment of the shell characteristics was accomplished using Corbicula bensoni and Lamellidens marginalis as model species. The calcium carbonate (CaCO₃) content of the shells, physical features and mechanical strength were assessed along with the morphometric analysis. The CaCO₃ content of the shell (upto 95% to 96% of the shell weight) of both the mussels was positively correlated with the shell length, suggesting increased deposition of CaCO₃ in shells with the growth of the species. The cross sectioned views of FE-SEM images of the shells exhibited distinct layered structure with external periostracum and inner nacreous layer varying distinctly. In the growing region, the growth line was prominent in the mussel shells revealed through the FESEM images. In addition XRD, FTIR and EDS studies on the mussel shells confirmed the existence of both aragonite and calcite forms of the calcium carbonate crystals with the incidence of various functional groups. The mechanical strength of the mussel shells was explored through nanoindentation experiments, revealed significant strength at the nanoparticle level of the shells. It was apparent from the results that the shell of the freshwater mussel L. marginalis and C. bensoni qualify as a biological material with prospective multiple applications for human well-being and sustaining environmental quality.

Freshwater mussel shells: prospects as multifunctional biological material.