A review of biodegradation of synthetic plastic and foams

Biodegradation of four polyolefin plastics in superworms (Larvae of Zophobas atratus) and effects on the gut microbiome

Recent studies have demonstrated superworms (larvae of Zophobas atratus) ability to degrade polyethylene (PE), polystyrene (PS), polyvinyl chloride (PVC), and polypropylene (PP) within their digestive system. This study aimed to compare the ability of superworms to degrade the above four polyolefin plastics over a duration of 30 days. In this study, the degradation rate of PE was the highest, and the final average weight of superworms, as well as the final plastic mass loss consumed by them, significantly increased (73.38 % and 52.33 %, respectively) when PE was fed with wheat bran (1:1 [w/w]). FTIR and TGA indicated the occurrence of oxidation and biodegradation processes in the four polyolefin plastics when exposed to superworms. In addition, the molecular weights (Mw and Mn) of excreted polymer residues decreased by 3.1 % and 2.87 % in PE-fed superworms, suggesting that the depolymerization of PE was not entirely dependent on the gut microbial community. The analysis of the gut microbial communities revealed that the dominant microbial community were different for each type of plastic. The results indicate that the gut microbiome of superworms exhibited remarkable adaptability in degrading various types of plastics, and the intake preferences and efficiency of different plastics are associated with different dominant microbial community species.

Metagenomic investigations into the microbial consortia, degradation pathways, and enzyme systems involved in the biodegradation of plastics in a tropical lentic pond sediment

The exploitation of exciting features of plastics for diverse applications has resulted in significant plastic waste generation, which negatively impacts environmental compartments, metabolic processes, and the well-being of aquatic ecosystems biota. A shotgun metagenomic approach was deployed to investigate the microbial consortia, degradation pathways, and enzyme systems involved in the degradation of plastics in a tropical lentic pond sediment (APS). Functional annotation of the APS proteome (ORFs) using the PlasticDB database revealed annotation of 1015 proteins of enzymes such as depolymerase, esterase, lipase, hydrolase, nitrobenzylesterase, chitinase, carboxylesterase, polyesterase, oxidoreductase, polyamidase, PETase, MHETase, laccase, alkane monooxygenase, among others involved in the depolymerization of the plastic polymers. It also revealed that polyethylene glycol (PEG), polyhydroxyalkanoates (PHA), polyhydroxybutyrate (PHB), polylactic acid (PLA), polybutylene adipate terephthalate (PBAT), polyethylene terephthalate (PET), and nylon have the highest number of annotated enzymes. Further annotation using the KEGG GhostKOALA revealed that except for terephthalate, all the other degradation products of the plastic polymers depolymerization such as glyoxylate, adipate, succinate, 1,4-butanediol, ethylene glycol, lactate, and acetaldehyde were further metabolized to intermediates of the tricarboxylic acid cycle. Taxonomic characterization of the annotated proteins using the AAI Profiler and BLASTP revealed that Pseudomonadota members dominate most plastic types, followed by Actinomycetota and Acidobacteriota. The study reveals novel plastic degraders from diverse phyla hitherto not reported to be involved in plastic degradation. This suggests that plastic pollution in aquatic environments is prevalent with well-adapted degrading communities and could be the silver lining in mitigating the impacts of plastic pollution in aquatic environments.

Biodegradation of polyethylene and polystyrene by Zophobas atratus larvae from Bangladeshi source and isolation of two plastic-degrading gut bacteria

Plastic pollution has become a major environmental concern globally, and novel and eco-friendly approaches like bioremediation are essential to mitigate the impact. Low-density polyethylene (LDPE), linear low-density polyethylene (LLDPE), and expanded polystyrene (EPS) are three of the most frequently used plastic types. This study examined biodegradation of these using Zophobas atratus larvae, followed by isolation and whole genome sequencing of gut bacteria collected from larvae frass. Over 36 days, 24.04 % LDPE, 20.01 % EPS, and 15.12 % LLDPE were consumed on average by the larvae, with survival rates of 85 %, 90 %, and 87 %, respectively. Fourier transform infrared spectroscopy (FTIR) analysis of fresh plastic types, consumed plastics, and larvae frass showed proof of plastic oxidation in the gut. Frass bacteria were isolated and cultured in minimal salt media supplemented with plastics as the sole carbon source. Two isolates of bacteria were sampled from these cultures, designated PDB-1 and PDB-2. PDB-1 could survive on LDPE and LLDPE as carbon sources, whereas PDB-2 could survive on EPS. Scanning Electron Microscopy (SEM) provided proof of degradation in both cases. Both isolates were identified as strains of Pseudomonas aeruginosa, followed by sequencing, assembly, and annotation of their genomes. LDPE- and LLDPE-degrading enzymes e.g., P450 monooxygenase, alkane monooxygenase, alcohol dehydrogenase, etc. were identified in PDB-1. Similarly, phenylacetaldehyde dehydrogenase and other enzymes involved in EPS degradation were identified in PDB-2. Genes of both isolates were compared with genomes of known plastic-degrading P. aeruginosa strains. Virulence factors, antibiotic-resistance genes, and rhamnolipid biosurfactant biosynthesis genes were also identified in both isolates. This study indicated Zophobas atratus larvae as potential LDPE, LLDPE, and EPS biodegradation agent. Additionally, the isolated strains of Pseudomonas aeruginosa provide a more direct and eco-friendly solution for plastic degradation. Confirmation and modification of the plastic-degrading pathways in the bacteria may create scope for metabolic engineering in the future.

Analysis of the gut microbiome associated to PVC biodegradation in yellow mealworms

The potential of invertebrates in the biodegradation of plastic polymers such as polyvinyl chloride (PVC) is receiving increasing attention. The present study is aimed to identify the gut microbiome involved in this degradation in yellow mealworms, i.e., the larvae of Tenebrio molitor Linnaeus. The egested PVC polymer experienced a dramatic reduction in both number average molecular weight (Mn) and weight average molecular weight (Mw) of 99.3% and 99.6%, respectively, whereas FTIR analysis revealed chemical alterations. Mass spectrometry analysis identified two potential degradation products: phthalic acid, di(2-propylpentyl) ester and 2-Propenoic acid, tridecyl ester. Further, we used metagenomic sequencing to elucidate the response of the gut microbiome when transitioning from bran to PVC as a food source, identifying four microorganisms actively involved in PVC degradation. Additionally, metagenomic functional analysis of the gut microbiome identified 111 key gene modules that were significantly enriched. In summary, our findings suggest that yellow mealworms adapt to PVC degradation by modifying their gut microbiome both structurally and functionally.

Hydrogels: An overview of its classifications, properties, and applications

The review paper starts with the introduction to hydrogels along with broad literature survey covering different modes of synthesis including high energy radiation methods. After that, paper covered broad classification of the hydrogels depending upon the basis of their source of origin, method of synthesis, type of cross-linking present and ionic charges on bound groups. Another advanced category response triggered hydrogels, which includes pH, temperature, electro, and light and substrate responsive hydrogels was also studied. Presented paper summarises chemical structure, properties, and synthesis of different kinds of hydrogels. Main focus was given to the preparation super absorbents such as: Semi-interpenetrating networks (semi-IPNs), Interpenetrating networks (IPNs) and cross-linked binary graft copolymers (BGCPs). The weak mechanical properties and easy degradation limit the uses of bio-based -hydrogels in biomedical field. Their properties can be improved through different chemical and physical methods. These methods were also discussed in the current research paper. Also, it includes development of hydrogels as controlled drug delivery devices, as implants and biomaterials to replace malfunctioned body parts along with their use in several other applications listed in the literature. Literature survey on the application of hydrogels in different fields like biomedical, nano-biotechnology, tissue engineering, drug delivery and agriculture was also carried out.

Plastic debris, persistent organic pollutants and their toxicity impacts in coastal areas in Central Chile

The chemical components of plastic wastes have made their disposal a major economic, social, and environmental problem worldwide. This study evaluated the acute toxicity and genotoxicity of marine plastic debris on the beaches of Concepción Bay, Central Chile, taken during three periods (spring, summer, and winter). An integrated approach was used, including chemical and toxicological data, using the Microtox® test with Vibrio fischeri and SOS chromotest with Escherichia coli and concentrations of polychlorinated biphenyls (PCBs), Organochlorine Pesticides (OCPs) and polybrominated diphenyl ethers (PBDEs). The results presented here exclusively include the novel data obtained from the winter campaign, revealing high concentrations of PBDEs (238 ± 521 ng g-1). In addition, the genotoxicity and acute toxicity tests were sensitive for most of the samples studied. This investigation is the first attempt to analyse the toxicity of plastic debris in coastal areas along the Chilean coast.

Adsorbents obtained from recycled polymeric materials for retention of different pollutants: A review

Polymeric waste is an environmental problem, with an annual world production of approximately 368 million metric tons, and increasing every year. Therefore, different strategies for polymer waste treatment have been developed, and the most common are (1) redesign, (2) reusing and (3) recycling. The latter strategy represents a useful option to generate new materials. This work reviews the emerging trends in the development of adsorbent materials obtained from polymer wastes. Adsorbents are used in filtration systems or in extraction techniques for the removal of contaminants such as heavy metals, dyes, polycyclic aromatic hydrocarbons and other organic compounds from air, biological and water samples. The methods used to obtain different adsorbents are detailed, as well as the interaction mechanisms with the compounds of interest (contaminants). The adsorbents obtained are an alternative to recycle polymeric and they are competitive with other materials applied in the removal and extraction of contaminants.

Physicochemical and Structural Evidence that Bacillus cereus Isolated from the Gut of Waxworms (Galleria mellonella Larvae) Biodegrades Polypropylene Efficiently In Vitro

Biodegradation of plastic waste using microorganisms has been proposed as one of the solutions to the increasing worldwide plastic waste. Polypropylene (PP) is the second most used plastic used in various industries, and it has been widely used in the production of personal protective equipment such as masks due to the COVID-19 pandemic. Therefore, biodegradation of PP becomes very important. Here, we present results on the physicochemical and structural studies of PP biodegradation by Bacillus cereus isolated from the gut of the waxworms, Galleria mellonella larvae. We also studied the biodegradability of PP by the gut microbiota compared with Bacillus cereus. We analyzed the microbial degradation of the PP surface using scanning electron microscopy and energy - dispersive X-ray spectroscopy and confirmed that the physical and chemical changes were caused by Bacillus cereus and the gut microbiota. The chemical structural changes were further investigated using X-ray photoelectron microscopy and Fourier - transform - infrared spectroscopy, and it was confirmed that the oxidation of the PP surface proceeded with the formation of carbonyl groups (C=O), ester groups (C-O), and hydroxyl groups (-OH) by Bacillus cereus. Additionally, the gut microbiota composed of diverse microbial species showed equal oxidation of PP compared to Bacillus cereus. More importantly, high temperature gel permeation chromatography (HT-GPC) analysis showed that Bacillus cereus exhibited quantitatively a higher biodegradability of PP compared to the gut microbiota. Our results suggest that Bacillus cereus possesses a complete set of enzymes required to initiate the oxidation of the carbon chain of PP and will be used to discover new enzymes and genes that are involved in degrading PP.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10924-023-02878-y.

Microbial Enzyme Biotechnology to Reach Plastic Waste Circularity: Current Status, Problems and Perspectives

The accumulation of synthetic plastic waste in the environment has become a global concern. Microbial enzymes (purified or as whole-cell biocatalysts) represent emerging biotechnological tools for waste circularity; they can depolymerize materials into reusable building blocks, but their contribution must be considered within the context of present waste management practices. This review reports on the prospective of biotechnological tools for plastic bio-recycling within the framework of plastic waste management in Europe. Available biotechnology tools can support polyethylene terephthalate (PET) recycling. However, PET represents only ≈7% of unrecycled plastic waste. Polyurethanes, the principal unrecycled waste fraction, together with other thermosets and more recalcitrant thermoplastics (e.g., polyolefins) are the next plausible target for enzyme-based depolymerization, even if this process is currently effective only on ideal polyester-based polymers. To extend the contribution of biotechnology to plastic circularity, optimization of collection and sorting systems should be considered to feed chemoenzymatic technologies for the treatment of more recalcitrant and mixed polymers. In addition, new bio-based technologies with a lower environmental impact in comparison with the present approaches should be developed to depolymerize (available or new) plastic materials, that should be designed for the required durability and for being susceptible to the action of enzymes.

Unraveling the potential human health risks from used disposable face mask-derived micro/nanoplastics during the COVID-19 pandemic scenario: A critical review

With the global spread of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2), disposable face masks (DFMs) have caused negative environmental impacts. DFMs will release microplastics (MPs) and nanoplastics (NPs) during environmental degradation. However, few studies reveal the release process of MPs/NPs from masks in the natural environment. This review presents the current knowledge on the abiotic and biotic degradation of DFMs. Though MPs and NPs have raised serious concerns about their potentially detrimental effects on human health, little attention was paid to their impacts on human health from DFM-derived MPs and NPs. The potential toxicity of mask-derived MPs/NPs, such as gastrointestinal toxicity, pneumotoxicity, neurotoxicity, hepatotoxicity, reproductive and transgenerational toxicity, and the underlying mechanism will be discussed in the present study. MPs/NPs serve as carriers of toxic chemicals and pathogens, leading to their bioaccumulation and adverse effects of biomagnification by food chains. Given human experiments are facing ethical issues and animal studies cannot completely reveal human characteristics, advanced human organoids will provide promising models for MP/NP risk assessment. Moreover, in-depth investigations are required to identify the release of MPs/NPs from discarded face masks and characterize their transportation through the food chains. More importantly, innovative approaches and eco-friendly strategies are urgently demanded to reduce DFM-derived MP/NP pollution.

The Bacterial and Fungal Gut Microbiota of the Greater Wax Moth, Galleria mellonella L. Consuming Polyethylene and Polystyrene

Plastic production has been increasing exponentially in the last 60 years, but plastic disposal is out of control, resulting in the pollution of all ecosystems on Earth. Finding alternative environmentally sustainable choices, such as biodegradation by insects and their associated gut microbiota, is crucial, however we have only begun to characterize these ecosystems. Some bacteria and one fungus have been previously identified in the gut of Greater Wax Moth larvae (Galleria mellonella L., Lepidoptera, Pyralidae) located mainly in the Northern hemisphere. The aim of this study was to describe changes in the gut microbiota associated with the consumption of polyethylene and polystyrene by the Greater Wax Moth in Argentina, considering both bacteria and fungi. Larvae were fed polyethylene, polystyrene and beeswax as control for 7 days. Next generation sequencing revealed changes in the bacterial gut microbiome of the wax moth larvae at the phyla and genus levels, with an increase in two Pseudomonas strains. The fungal communities showed no differences in composition between diets, only changing in relative abundance. This is the first report of both bacterial and fungal communities associated with a plastivore insect. The results are promising and call for more studies concerning a potential multi-kingdom synergy in the plastic biodegradation process.

Investigating kitchen sponge-derived microplastics and nanoplastics with Raman imaging and multivariate analysis

Microplastics can be found almost everywhere, including in our kitchens. The challenge is how to characterise them, particularly for the small ones (<1 μm), referred to as nanoplastics, when they are mixed with larger particles and other components. Herewith we advance Raman imaging to characterise microplastics and nanoplastics released from a dish sponge that we use every day to clean our cookware and eating utensils. The scanning electron microscopy result shows significantly different structures of the soft and hard layers of the sponge, with the hard layer being more likely to shed particles. By scanning the sample surface to generate a spectrum matrix, Raman imaging can significantly improve signal-noise-ratio, compared with individual Raman spectra. Through mapping the characteristic peaks from the matrix that contains hundreds, even thousands of Raman spectra, it is confirmed that the particles released from the soft and hard layers of the sponge are mainly Nylon PA6 and polyethylene terephthalate, respectively. Using principal component analysis (PCA) to decode the spectrum matrix further enhances the signal-noise ratio, which enables mapping the whole set of the spectrum, rather than the selected peaks. By optimising the Raman scanning parameters, the PCA-Raman imaging is able to reliably capture and visualise microplastics and nanoplastics released from both sides of the dish sponge, including a plastic-surrounding-sand composite structure. Overall, PCA-Raman imaging is a holistic and effective approach to characterising miniature plastic particles.

Fungal Enzymes Involved in Plastics Biodegradation

Plastic pollution is a growing environmental problem, in part due to the extremely stable and durable nature of this polymer. As recycling does not provide a complete solution, research has been focusing on alternative ways of degrading plastic. Fungi provide a wide array of enzymes specialized in the degradation of recalcitrant substances and are very promising candidates in the field of plastic degradation. This review examines the present literature for different fungal enzymes involved in plastic degradation, describing their characteristics, efficacy and biotechnological applications. Fungal laccases and peroxidases, generally used by fungi to degrade lignin, show good results in degrading polyethylene (PE) and polyvinyl chloride (PVC), while esterases such as cutinases and lipases were successfully used to degrade polyethylene terephthalate (PET) and polyurethane (PUR). Good results were also obtained on PUR by fungal proteases and ureases. All these enzymes were isolated from many different fungi, from both Basidiomycetes and Ascomycetes, and have shown remarkable efficiency in plastic biodegradation under laboratory conditions. Therefore, future research should focus on the interactions between the genes, proteins, metabolites and environmental conditions involved in the processes. Further steps such as the improvement in catalytic efficiency and genetic engineering could lead these enzymes to become biotechnological applications in the field of plastic degradation.

Closing the Carbon Loop in the Circular Plastics Economy

Today, plastics are ubiquitous in everyday life, problem solvers of modern technologies, and crucial for sustainable development. Yet the surge in global demand for plastics of the growing world population has triggered a tidal wave of plastic debris in the environment. Moving from a linear to a zero-waste and carbon-neutral circular plastic economy is vital for the future of the planet. Taming the plastic waste flood requires closing the carbon loop through plastic reuse, mechanical and molecular recycling, carbon capture, and use of the greenhouse gas carbon dioxide. In the quest for eco-friendly products, plastics do not need to be reinvented but tuned for reuse and recycling. Their full potential must be exploited regarding energy, resource, and eco efficiency, waste prevention, circular economy, climate change mitigation, and lowering environmental pollution. Biodegradation holds promise for composting and bio-feedstock recovery, but it is neither the Holy Grail of circular plastics economy nor a panacea for plastic littering. As an alternative to mechanical downcycling, molecular recycling enables both closed-loop recovery of virgin plastics and open-loop valorization, producing hydrogen, fuels, refinery feeds, lubricants, chemicals, and carbonaceous materials. Closing the carbon loop does not create a Perpetuum Mobile and requires renewable energy to achieve sustainability. This article is protected by copyright. All rights reserved.

Subacute Oral Toxicity Evaluation of Expanded-Polystyrene-Fed Tenebrio molitor (Yellow Mealworm) Larvae Powder in Sprague-Dawley Rats

Tenebrio molitor larvae, as known as edible insects, has advantages of being rich in protein, and has been recognized as a suitable alternate protein source for broiler and pig feed. Moreover, given their ability to biodegrade polystyrene, a major pollutant, Tenebrio molitor larvae has been proposed as an innovative solution to environmental problems. In the present study, we investigated the toxicity of Tenebrio molitor larvae powder (TMlp) ingested with expanded-polystyrene (W/ eps) through in vitro and in vivo experiments. The objective of this study was to determine whether TMlp W/ eps can be applied as livestock alternative protein source. For in vitro experiments, cytotoxicity test was performed to investigate the effects of TMlp-extract on the viability of estrogen-dependent MCF-7 cells. The possibility of estrogen response was investigated in two groups: Expanded-polystyrene-fed (W/ eps) TMlp group and without expanded-polystyrene-fed (W/o eps) TMlp group. For in vivo experiments, The male Sprague-Dawley rats were divided based on the dosage of TMlp administered and oral administration was performed to every day for 5 weeks. A toxicological assessments were performed, which included clinical signs, food consumption, body and organ weights, hematology, serum chemistry, and hematoxylin and eosin staining of liver and kidney. There were no specific adverse effect of TMlp W/ eps-related findings under the experimental conditions of this study, but further studies on both sexes and animal species differences should be investigated. In conclusion, TMlp W/ eps was considered non-toxic and observed to be applicable as an alternative protein source for livestock feed.

Hydrocarbon-based plastics: Progress and perspectives on consumption and biodegradation by insect larvae

The obvious contrast between the remarkable durability and the high consumption of plastic products leads to the deposition of at least 100 million tons of plastics per year in nature. Since 2010, several studies have shown the potential of insect larvae to biodegrade different types of plastics, at higher rates than those reported for microorganisms. This review discusses a compilation of studies about the consumption and biodegradation of hydrocarbon-based plastics, particularly PE, PS, PP and PVC, by lepidopteran and coleopteran larvae. Insects of the Coleoptera order seem to have a better adaptation for PS biodegradation, while those of the Lepidoptera order can better biodegrade PE. Tenebrio molitor biomineralize PE and PS into CO₂, and PVC into HCl; while Tenebrio obscurus and Zophobas atratus converts PE and PS into CO₂, respectively. Plastic biodegradation by T. molitor has been shown to be dependent on microbiota, exception for PE. Similar PS and PE biodegradation profile has been shown for T. obscurus. PS, PP and PE biodegradation by Z. atratus is also reported to be microbial-dependent. For Galleria mellonella, microbial role on PE biodegradation is still controversial, but the PS metabolism was proved to be microbiota-independent. Advances in this field has stimulated new studies with other insect species, which need to be better explored. Uncovering and understanding the chemical processes behind the innate plastic biodegradation by insect larvae will open the perspective to new eco-friendly innovative biotechnological solutions for the challenge of plastic waste.

Generation patterns and consumer behavior of single-use plastic towards plastic-free university campuses

This study was conducted to estimate the generation of single-use plastics (SUPs) and elucidate consumer behavior towards a plastic-free university. The results show that the consumption rate of plastic bottles was the highest at 1.39 g per student per day (g.s^-1.d^-1), followed by plastic cups (0.20 g s^-1.d^-1), and plastic bags (0.14 g s^-1.d^-1). Approximately 94.41% of students were highly aware of the negative impacts of SUPs. More than four-fifths of the students (82.32%) assumed that they were responsible for the SUP pollution issue, whereas 59.52% considered SUP reduction (or lack thereof) by individuals, governments, and producers/businesses be important factors. Approximately 19.03% of the students supported implementing a high fine, one-tenth agreed for a total ban on SUPs, while nearly one-fifth believed reducing SUP consumption was unnecessary. Strategies for plastic-free universities was initiated by establishing the goal of "plastic-free university" and implementing integrated actions including a ban (plastic cups and bags) awareness-raising, and suitable alternatives.

A Critical Review of the Performance and Soil Biodegradability Profiles of Biobased Natural and Chemically Synthesized Polymers in Industrial Applications

This review explores biobased polymers for industrial applications, their end fate, and most importantly, origin and key aspects enabling soil biodegradation. The physicochemical properties of biobased synthetic and natural polymers and the primary factors governing degradation are explored. Current and future biobased systems and factors allowing for equivalent comparisons of degradation and possible sources for engineering improved biodegradation are reviewed. Factors impacting ultraviolet (UV) stability of biopolymers have been described including methods to enhance photoresistance and impact on biodegradation. It discusses end-fate of biopolymers in soil and impact of residues on soil health. A limited number of studies examine side effects (e.g., microbial toxicity) from soil biodegradation of composites and biopolymers. Currently available standards for biodegradation and composting have been described with limitations and scope for improvements. Finally, design considerations and implications for sustainable polymers used, under consideration, and to be considered within the context of a rational biodegradable strategy are elaborated.

Marine bacteria-based polyvinyl chloride (PVC) degradation by-products: Toxicity analysis on Vigna radiata and edible seaweed Ulva lactuca

Biodegradation of polyvinyl chloride (PVC) by marine bacteria is a sustainable approach that leads to the production of different by-products but their toxicity needs to be evaluated. In the present study, polyvinyl chloride degradation products (PVCDP) produced by three marine bacterial isolates (T-1.3, BP-4.3 and S-237) in the culture supernatant were evaluated for toxicity on the germination of Vigna radiata and growth of Ulva lactuca. A total of 24 compounds comprising of benzene, fatty acid, ether, ester and plastic stabilizer (tris (2, 4-di-tert-butylphenyl) phosphate) were identified by GC-MS using diethyl ether solvent extraction from the supernatant. The per cent germination rate of the seed treated with PVCDP showed no significant effect but germination index and elongation inhibition rate were influenced significantly by PVCDP treatments. In seaweed (U. lactuca), PVCDP showed improvement in the daily growth rate. After ten days of treatment with PVCDP, pigment contents were improved in seaweed and PVCDP (2%) of isolate T-1.3 recorded the highest chlorophyll-a and chlorophyll-b.

Extrapolation of design strategies for lignocellulosic biomass conversion to the challenge of plastic waste

The goal of cost-effective production of fuels and chemicals from biomass has been a substantial driver of the development of the field of Metabolic Engineering. The resulting design principles and procedures provide a guide for the development of cost-effective methods for degradation, and possibly even valorization, of plastic wastes. Here we highlight these parallels, using the creative work of Lonnie O'Neal (Neal) Ingram in enabling production of fuels and chemicals from lignocellulosic biomass, with a focus on ethanol production as an exemplar process.

Microbial biodegradation of plastics: Challenges, opportunities, and a critical perspective

The abundance of synthetic polymers has increased due to their uncontrolled utilization and disposal in the environment. The recalcitrant nature of plastics leads to accumulation and saturation in the environment, which is a matter of great concern. An exponential rise has been reported in plastic pollution during the corona pandemic because of PPE kits, gloves, and face masks made up of single-use plastics. The physicochemical methods have been employed to degrade synthetic polymers, but these methods have limited efficiency and cause the release of hazardous metabolites or by-products in the environment. Microbial species, isolated from landfills and dumpsites, have utilized plastics as the sole source of carbon, energy, and biomass production. The involvement of microbial strains in plastic degradation is evident as a substantial amount of mineralization has been observed. However, the complete removal of plastic could not be achieved, but it is still effective compared to the preexisting traditional methods. Therefore, microbial species and the enzymes involved in plastic waste degradation could be utilized as eco-friendly alternatives. Thus, microbial biodegradation approaches have a profound scope to cope with the plastic waste problem in a cost-effective and environmental-friendly manner. Further, microbial degradation can be optimized and combined with physicochemical methods to achieve substantial results. This review summarizes the different microbial species, their genes, biochemical pathways, and enzymes involved in plastic biodegradation.

Biodegradation of foam plastics by Zophobas atratus larvae (Coleoptera: Tenebrionidae) associated with changes of gut digestive enzymes activities and microbiome

In order to uncover the plastic types that superworm Zophobas atratus can degrade and the underlying changes associated with plastics consumption, three types of plastics including polystyrene (PS), polyethylene (PE) and polyurethane (PU) foam were used as sole feedstock to feed the superworm larvae for 35 days with bran as control. Compared to the control, PS- or PU-fed larvae showed 100% survival rates, the PE-fed and starvation larvae had decreased survival rates of 81.67% and 65%, respectively. Both plastics-fed and starvation groups showed decreased larvae weight. The consumption rates of PS, PE, and PU were 1.41, 0.30, and 0.74 mg/d/larva, respectively. The attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and differential scanning calorimeter and thermogravimetric (DSC-TGA) analyses demonstrated the changes of functional groups and thermostability in frass compared to plastic feedstocks, indicating the partial oxidation and degradation of plastics. Among the gut digestive enzymes tested, protease showed increased activities in all plastics-fed groups. Gut microbial communities displayed significant relative abundance changes such as increased abundances of Enterococcus in all plastic-fed groups, Citrobacter in PE-fed group, Dysgonomonas and Sphingobacterium in PS-fed group, and Mangrovibacter in PU-fed group. The latter 3 genera were reported for the first time. In summary, the results demonstrated that Z. atratus could efficiently degrade both PS and PU foam plastics, and the plastic degradation was associated with changes of gut microbial communities and digestive enzyme activities.

Confirmation of biodegradation of low-density polyethylene in dark- versus yellow- mealworms (larvae of Tenebrio obscurus versus Tenebrio molitor) via. gut microbe-independent depolymerization

Tenebrio obscurus (Coleoptera: Tenebrionidae) larvae are capable of biodegrading polystyrene (PS) but their capacity for polyethylene (PE) degradation and pattern of depolymerization remains unknown. This study fed the larvae of T. obscurus and Tenebrio molitor, which have PE degrading capacity, two commercial low-density PE (LDPE) foams i.e., PE-1 and PE-2, with respective number-average molecular weights (M_n) of 28.9 and 27.3 kDa and weight-average molecular weights (M_w) of 342.0 and 264.1 kDa, over a 36-day period at ambient temperature. The M_w of residual PE in frass (excrement) of T. obscurus, fed with PE-1 and PE-2, decreased by 45.4 ± 0.4% and 34.8 ± 0.3%, respectively, while the respective decrease in frass of T. molitor was 43.3 ± 0.5% and 31.7 ± 0.5%. Data analysis showed that low molecular weight PE (<5.0 kDa) was rapidly digested while longer chain portions (>10.0 kDa) were broken down or cleaved, indicating a broad depolymerization pattern. Mass balance analysis indicated nearly 40% of ingested LDPE was digested to CO₂. Antibiotic suppression of gut microbes in T. molitor and T. obscurus larvae with gentamicin obviously reduced their gut microbes on day 15 but did not stop depolymerization because the M_n, Mw and size- average molecular weight (M_z) decreased. This confirmed that LDPE biodegradation in T. obscurus was independent of gut microbes as observed during previous PS degradation in T. molitor, suggesting that the intestinal digestive system could perform LDPE depolymerization. High-throughput sequencing revealed significant shifts in the gut microbial community during bran-fed and unfed conditions in response to LDPE feeding in both Tenebrio species. The respective predominant gut genera of Spiroplasma sp. and Enterococcus sp. were observed in LDPE-fed T. molitor and T. obscurus larvae.

Highly Sensitive, Flexible, Stable, and Hydrophobic Biofoam Based on Wheat Flour for Multifunctional Sensor and Adjustable EMI Shielding Applications

Biofoam materials are attractive alternatives for petroleum-based foams to be used to solve environmental problems. Inspired by steamed bread, we report herein a novel utilization of wheat flour (WF) with the introduction of carbon nanotubes (CNTs) to form an environmentally friendly WF/CNT composite foam. This foam displayed a high elasticity (nearly 100% shape recovery), recyclable (5000 cycles), fast (100 ms), and superstability pressure-sensing response. It could serve as a new pressure sensor to detect the tiny pressure (1.76 Pa) and acoustic vibrations from piano notes. As an acoustic sensor, WF/CNT foam detected and recognized different volumes and frequencies of piano sounds. As an electromagnetic interference (EMI) shielding switch, the EMI shielding effectiveness (SE) of the foam could be easily regulated under self-fixable compression-recovery cycles. In addition, the WF/CNT foam could be converted into the WF/CNT film by a hot-compress process. This flexible film was applied as a multifunctional sensing device for detecting various motions. Therefore, wheat flour as a renewable resource could be designed into various WF-based biofoams with new functionalities and outstanding mechanical properties through a simple process.

Studies of Resistance of PP/Natural Filler Polymer Composites to Decomposition Caused by Fungi

The article discusses the grain morphology of the natural filler from hazelnut and walnut shell flour. It was observed that the geometry of both meals is similar to each other and resembles uneven balls in shape. The heterogeneity and well-developed outer surface of the flour grains allow for filling the voids with the polymer matrix. The analysis of the surface of the SEM images allowed to observe the presence of natural filler flour grains in the entire volume of the produced polymer composites, uneven distribution and small agglomerates, as well as the presence of voids, distributed in the matrix and in the matrix/filler interface. As a result of the visual evaluation of the activity of microorganisms (mycelium) on the surface of the produced polymer composite materials PP/hazelnut and walnut shell flour with a different % share, different fraction, it was found that the best fungistatic effect was shown by the samples marked with the symbol hazelnut at the fraction 315-443 µm. The least fungistatic material was found to be the samples with walnut shell meal filler at the fraction 315-443 µm (F2 and F4), on which the microorganisms achieved significant growth (more than 50% of the test area). The highest value of contact angle was obtained for samples with hazelnut filler fraction 315-443 (C2 and C4), which also confirms its best fungistatic effect.

Changes in Intestinal Microbiota Due to the Expanded Polystyrene Diet of Mealworms (Tenebrio molitor)

Expanded polystyrene (EPS), which is difficult to decompose, is usually buried or incinerated, causing the natural environment to be contaminated with microplastics and environmental hormones. Digestion of EPS by mealworms has been identified as a possible biological solution to the problem of pollution, but the complete degradation mechanism of EPS is not yet known. Intestinal microorganisms play a significant role in the degradation of EPS by mealworms, and relatively few other EPS degradation microorganisms are currently known. This study observed significant differences in the intestinal microbiota of mealworms according to the dietary results of metagenomics analysis and biodiversity indices. We have proposed two new candidates of EPS-degrading bacteria, Cronobacter sakazakii and Lactococcus garvieae, which increased significantly in the EPS feeding group population. The population change and the new two bacteria will help us understand the biological mechanism of EPS degradation and develop practical EPS degradation methods.

Testing and Assessing Method for the Resistance of Wood-Plastic Composites to the Action of Destroying Fungi

Durability tests against fungi action for wood-plastic composites are carried out in accordance with European standard ENV 12038, but the authors of the manuscript try to prove that the assessment of the results done according to these methods is imprecise and suffers from a significant error. Fungi exposure is always accompanied by high humidity, so the result of tests made by such method is always burdened with the influence of moisture, which can lead to a wrong assessment of the negative effects of action fungus itself. The manuscript has shown a modification of such a method that separates the destructive effect of fungi from moisture accompanying the test's destructive effect. The functional properties selected to prove the proposed modification are changes in the mass and bending strength after subsequent environmental exposure. It was found that intensive action of moisture measured in the culture chamber of about (70 ± 5)%, i.e., for 16 weeks, at (22 ± 2) °C, which was the fungi culture, which was accompanying period, led to changes in the mass of the wood-plastic composites, amounting to 50% of the final result of the fungi resistance test, and changes in the bending strength amounting to 30-46% of the final test result. As a result of the research, the correction for assessing the durability of wood-polymer composites to biological corrosion has been proposed. The laboratory tests were compared with the products' test results following three years of exposure to the natural environment.

Enhanced Bioavailability and Microbial Biodegradation of Polystyrene in an Enrichment Derived from the Gut Microbiome of Tenebrio molitor (Mealworm Larvae)

As the global threat of plastic pollution has grown in scale and urgency, so have efforts to find sustainable and efficient solutions. Research conducted over the past few years has identified gut environments within insect larvae, including Tenebrio molitor (yellow mealworms), as microenvironments uniquely suited to rapid plastic biodegradation. However, there is currently limited understanding of how the insect host and its gut microbiome collaborate to create an environment conducive to plastic biodegradation. In this work, we provide evidence that T. molitor secretes one or more emulsifying factor(s) (30-100 kDa) that mediate plastic bioavailability. We also demonstrate that the insect gut microbiome secretes factor(s) (<30 kDa) that enhance respiration on polystyrene (PS). We apply these insights to culture PS-fed gut microbiome enrichments, with elevated rates of respiration and degradation compared to the unenriched gut microbiome. Within the enrichment, we identified eight unique gut microorganisms associated with PS biodegradation including Citrobacter freundii, Serratia marcescens, and Klebsiella aerogenes. Our results demonstrate that both the mealworm itself and its gut microbiome contribute to accelerated plastic biodegradation. This work provides new insights into insect-mediated mechanisms of plastic degradation and potential strategies for cultivation of plastic-degrading microorganisms in future investigations and scale-up.

Critical evaluation of biodegradation studies on synthetic plastics through a systematic literature review

Increasing amounts of plastic waste in the environment and their fragmentation into smaller particles known as microplastics (particles, <5mm) have raised global concerns due to their persistency in the environment and their potential to act as vectors for harmful substances or pathogenic microorganisms. One possible solution to this problem is biodegradation of plastics by microorganisms. However, the scientific information on plastic-degrading microorganisms is scattered across different scientific publications. We conducted a systematic literature review (SLR) with predefined criteria using the online databases of Scopus and Web of Science to find papers on bacterial biodegradation of synthetic petroleum-based polymers. The aims of this SLR were to provide an updated list of all of the currently known bacteria claimed to biodegrade synthetic plastics, to determine and define the best methods to assess biodegradation, to critically evaluate the existing studies, and to propose directions for future research on polymer biodegradation in support of more rapid development of biodegradation technologies. Most of the bacteria identified here from the 145 reviewed papers belong to the phyla Proteobacteria, Firmicutes and Actinobacteria, and most were isolated from contaminated sites, such as landfill sites. Just under a half of the studies (44%) investigated the biodegradability of polyethylenes and derivates, particularly low-density polyethylenes. The methods used to monitor the biodegradation were mainly scanning electron microscopy and Fourier-transform infrared spectroscopy. We propose that: (1) future research should focus on biodegradation of microplastics arising from the most common pollutants (e.g. polyethylenes); (2) bacteria should be isolated from environments that are permanently contaminated with plastics; and (3) a combination of different observational methods should be used to confirm bacterial biodegradation of these plastics. Finally, when reporting, researchers need to follow standard protocols and include all essential information needed for repetition of the experiments by other research groups.

Greater Biofilm Formation and Increased Biodegradation of Polyethylene Film by a Microbial Consortium of Arthrobacter sp. and Streptomyces sp

The widespread use of polyethylene (PE) mulch films has led to a significant accumulation of plastic waste in agricultural soils. The biodegradation of plastic waste by microorganisms promises to provide a cost-effective and environmentally-friendly alternative for mitigating soil plastic pollution. A large number of microorganisms capable of degrading PE have been reported, but degradation may be further enhanced by the cooperative activity of multiple microbial species. Here, two novel strains of Arthrobacter sp. and Streptomyces sp. were isolated from agricultural soils and shown to grow with PE film as a sole carbon source. Arthrobacter sp. mainly grew in the suspension phase of the culture, and Streptomyces sp. formed substantial biofilms on the surface of the PE film, indicating that these strains were of different metabolic types and occupied different microenvironments with contrasting nutritional access. Individual strains were able to degrade the PE film to some extent in a 90-day inoculation experiment, as indicated by decreased hydrophobicity, increased carbonyl index and CO₂ evolution, and the formation of biofilms on the film surface. However, a consortium of both strains had a much greater effect on these degradation properties. Together, these results provide new insights into the mechanisms of PE biodegradation by a microbial consortium composed of different types of microbes with possible metabolic complementarities.

Biodegradation of Polyvinyl Chloride (PVC) in Tenebrio molitor (Coleoptera: Tenebrionidae) larvae

Tenebrio molitor larvae (Coleoptera: Tenebrionidae) are capable of depolymerizing and biodegrading polystyrene and polyethylene. We tested for biodegradation of Polyvinyl Chloride (PVC) in T. molitor larvae using rigid PVC microplastic powders (MPs) (70-150 μm) with weight-, number-, and size-average molecular weights (M_w, M_n and M_z) of 143,800, 82,200 and 244,900 Da, respectively, as sole diet at 25 °C. The ingestion rate was 36.62 ± 6.79 mg MPs 100 larvae^-1 d^-1 during a 16-day period. The egested frass contained about 34.6% of residual PVC polymer, and chlorinated organic carbons. Gel permeation chromatography (GPC) analysis indicated a decrease in the M_w, M_n and M_z by 33.4%, 32.8%, and 36.4%, respectively, demonstrating broad depolymerization. Biodegradation and oxidation of the PVC MPs was supported by the formation of OC and OC functional groups using frontier transform infrared spectroscopy (FTIR) and ¹H nuclear magnetic resonance (¹H NMR), and by significant changes in the thermal characteristics using thermo-gravimetric analysis (TGA). Chloride released was counted as about 2.9% of the PVC ingested, indicating limited mineralization of the PVC MPs. T. molitor larvae survived with PVC as sole diet at up to 80% over 5 weeks but did not complete their life cycle with a low survival rate of 39% in three months. With PVC plus co-diet wheat bran (1:5, w/w), they completed growth and pupation as same as bran only in 91 days. Suppression of gut microbes with the antibiotic gentamicin severely inhibited PVC depolymerization, indicating that the PVC depolymerization/biodegradation was gut microbe-dependent. Significant population shifts and clustering in the gut microbiome and unique OTUs were observed after PVC MPs consumption. The results indicated that T. molitor larvae are capable of performing broad depolymerization/biodegradation but limited mineralization of PVC MPs.

Fungal mycelia functionalization with halloysite nanotubes for hyphal spreading and sorption behavior regulation: A new bio-ceramic hybrid for enhanced water treatment

Filamentous fungi are believed to remove a wide range of environmental xenobiotics due to their characteristically non-specific catabolic metabolisms. Nonetheless, irregular hyphal spreading can lead to clogging problems in treatment facilities and the dependence of pollutant bioavailability on hyphal surface features severely limits their applicability in water treatment. Here, we propose a scalable and facile methodology to structurally modify fungal hyphae, allowing for both the maximization of pollutant sorption and fungal pellet morphology self-regulation. Halloysite-doped mycelium architectures were efficiently constructed by dipping Aspergillus fumigatus pellets in halloysite nanotube-dispersed water. Ultrastructure analyses using scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy revealed that the nanotubes were mainly attached to the outer surface of the pellets. Fungal viability and exoenzyme production were hardly affected by the halloysites. Notably, nanotube doping appeared to be extremely robust given that detachments rarely occurred even in high concentrations of organic solvents and salt. It was also demonstrated that the doped halloysites weakened hyphal growth-driven gelation, thus maintaining sphere-like pellet structures. The water treatment potential of the hybrid fungal mycelia was assessed through both cationic toxic organic/inorganic-contaminated water and real dye industry wastewater clean-ups. Aided by the mesoporous halloysite sites on their surface, the removal abilities of the hybrid structures were significantly enhanced. Moreover, inherent low sorption ability of HNT for heavy metals was found to be overcome by the aid of fungal mycelia. Finally, universal feature of the dipping-based doping way was confirmed by using different filamentous fungi. Given that traditional approaches to effectively implement fungus-based water treatment are based mostly on polymer-based immobilization techniques, our proposed approach provides a novel and effective alternative via simple doping of living fungi with environmentally-benign clays such as halloysite nanotubes.

Compostable, fully biobased foams using PLA and micro cellulose for zero energy buildings

Ecological, health and environmental concerns are driving the need for bio-resourced foams for the building industry. In this paper, we examine foams made from polylactic acid (PLA) and micro cellulose fibrils (MCF). To ensure no volatile organic compounds in the foam, supercritical CO₂ (sc-CO₂) physical foaming of melt mixed systems was conducted. Mechanical and thermal conductivity properties were determined and applied to a net zero energy model house. The results showed that MCF had a concentration dependent impact on the foams. First structurally, the presence of MCF led to an initial increase followed by a decrease of open porosity, higher bulk density, lower expansion ratios and cell size. Differential Scanning Calorimetry and Scanning Electron Microscopy revealed that MCF decreased the glass transition of PLA allowing for a decrease in cell wall thickness when MCF was added. The mechanical performance initially increased with MCF and then decreased. This trend was mimicked by thermal insulation which initially improved. Biodegradation tests showed that the presence of cellulose in PLA improved the compostability of the foams. A maximum comparative mineralization of 95% was obtained for the PLA foam with 3 wt.% MCF when expressed as a fractional percentage of the pure cellulose reference. Energy simulations run on a model house showed that relative to an insulation of polyurethane, the bio-resourced foams led to no more than a 12% increase in heating and cooling. The energy efficiency of the foams was best at low MCF fractions.

Effects of Tensile Stress and Soil Burial on Mechanical and Chemical Degradation Potential of Agricultural Plastic Films

Plastic film mulching is widely practiced in arid and semiarid farming systems, but the accumulation of plastic residues in soils can negatively affect soil properties. Therefore, efficient means of plastic film degradation are urgently needed to mitigate its unfriendly environmental impacts for sustainable land use. Here, we characterized the effects of tensile stress (TS) and soil burial (SB) on potential degradation properties of three film types: Polyethylene film (PEF), oxo-biodegradable film (OBDF), and biodegradable film (BDF). Weight loss, mechanical properties, hydrophilicity, functional groups, and crystallinity were recorded after TS and SB treatments. The results indicated that: (1) Weight loss of plastic films was associated with SB, although the extent of weight loss depended on film type and was highest in BDF, (2) application of TS before SB weakened the mechanical properties of the films and increased their hydrophilicity, creating favorable conditions for the settlement of microorganisms on the film surface, (3) PEF treated with TS and SB had higher functional group indices and lower crystallinity. Our results highlighted that the combination of TS and SB has the potential to accelerate plastic film degradation.

Biodegradation of Polystyrene by Pseudomonas sp. Isolated from the Gut of Superworms (Larvae of Zophobas atratus)

Recently, various attempts have been made to solve plastic waste problems, such as development of biodegradation without producing pollution. Polystyrene (PS) is the fifth most used plastic in many industries; therefore, degrading PS becomes a critical global issue. Here, we reported Pseudomonas aeruginosa strain DSM 50071, initially isolated from the gut of the superworms, Zophobas atratus, and the PS degradation by Pseudomonas sp. DSM 50071. We examined PS degradation using electronic microscopy and measured changes in atomic composition and contact angles with water droplets on the PS surface that represents a chemical change from hydrophobicity to hydrophilicity. We have further examined chemical structural changes using X-ray photoelectron spectroscopy, Fourier-transform-infrared spectroscopy, and nuclear magnetic resonance (NMR) to confirm the formation of carbonyl groups (C═O) in the oxidation pathway during PS biodegradation. In reverse transcription quantitative polymerase chain reaction analysis, the gene expression level of serine hydrolase (SH) in Pseudomonas sp. DSM 50071 was highly increased during PS degradation, and the enzyme-mediated biodegradation of PS was further confirmed by the SH inhibitor treatment test. Thus, the significance of these findings goes beyond the discovery of a novel function of Pseudomonas sp. DSM 50071 in the gut of superworms, highlighting a potential solution for PS biodegradation.

Characterization and Preparation of Furanic-Glyoxal Foams

Synthetic foams have become an essential industrial product for a great variety of applications. Furfuryl alcohol, as a biomass chemical, was reacted with glyoxal at room temperature to prepare furanic-glyoxal rigid foams, and p-toluenesulfonic acid was used as a catalyst to initiate the reaction. Foams with different molar ratios (furfuryl alcohol/glyoxal) were prepared in this work, and uniform cells foams have been obtained. Their compression resistance, 24-h water absorption, density, and other basic properties were tested. Scanning electron microscopy (SEM) was used to observe the cellular morphology of the foams prepared, thermogravimetric analysis (TGA) helped to understand their thermal and combustion properties, and FTIR and Matrix Assisted Laser Desorption Ionisation Time of Flight (MALDI ToF) mass spectroscopy to explain the structure of the resulting foams to clarify the reactions occurring during foaming. The results show that the compression resistance of furanic-glyoxal foams declined as the furfuryl alcohol/glyoxal ratio decreases also. SEM observations revealed that foams with open-cell were obtained when furfuryl alcohol was added in greater amounts, and more closed cell structures were formed as the proportion of glyoxal increased. TGA results showed that the initial ignition temperature of furanic-glyoxal foams is ~200 °C higher than that of wood, and the smaller comprehensive combustion index S (about 0.15 × 10⁻⁷ (%² K⁻³ min⁻²)) indicates that the foam burns slowly and has poor flammability, that is, it is not easy to burn.

Fate of Hexabromocyclododecane (HBCD), A Common Flame Retardant, In Polystyrene-Degrading Mealworms: Elevated HBCD Levels in Egested Polymer but No Bioaccumulation

As awareness of the ubiquity and magnitude of plastic pollution has increased, so has interest in the long term fate of plastics. To date, however, the fate of potentially toxic plastic additives has received comparatively little attention. In this study, we investigated the fate of the flame retardant hexabromocyclododecane (HBCD) in polystyrene (PS)-degrading mealworms and in mealworm-fed shrimp. Most of the commercial HBCD consumed by the mealworms was egested in frass within 24 h (1-log removal) with nearly a 3-log removal after 48 h. In mealworms fed PS containing high HBCD levels, only 0.27 ± 0.10%, of the ingested HBCD remained in the mealworm body tissue. This value did not increase over the course of the experiment, indicating little or no bioaccumulation. Additionally, no evidence of higher trophic level bioaccumulation or toxicity was observed when L. vannamei (Pacific whiteleg shrimp) were fed mealworm biomass grown with PS containing HBCD. Differences in shrimp survival were attributable to the fraction of mealworm biomass incorporated into the diet, not HBCD. We conclude that the environmental effects of PS ingestion need further evaluation as the generation of smaller, more contaminated particles is possible, and may contribute to toxicity at nanoscale.

Microplastics in a freshwater mussel (Anodonta anatina) in Northern Europe

Alarming amounts of microplastics have recently been shown to accumulate in the environment. Recent focus has been on synthetic material contaminating the marine environment, while effects on freshwater habitats and organisms have received less attention. We here confirm and analyse occurrence of microplastics in the duck mussel, Anodonta anatina, in a Swedish river. All analysed mussels contained microplastics, and the number of microplastic debris found in the mussels increased with mussel size. In addition, we demonstrate higher concentrations of microplastics downstream urban areas with wastewater treatment plants compared to a rural upstream location. Both fibres and particles were found in the mussels, indicating that the emissions of these pollutants may have varying origin. Our study indicates that microplastics can be suspended in the water column in streams and that concentrations are higher downstream anthropogenic activity. We discuss our results in light of potential pathways in rural versus surrounding arable land, and highlight a number of required research directions in the aquatic system.

Cellulose Nanostructure-Based Biodegradable Nanocomposite Foams: A Brief Overview on the Recent Advancements and Perspectives

The interest in designing new environmentally friendly materials has led to the development of biodegradable foams as a potential substitute to most currently used fossil fuel-derived polymer foams. Despite the possibility of developing biodegradable and environmentally friendly polymer foams, the challenge of foaming biopolymers still persists as they have very low melt strength and viscosity as well as low crystallisation kinetics. Studies have shown that the incorporation of cellulose nanostructure (CN) particles into biopolymers can enhance the foamability of these materials. In addition, the final properties and performance of the foamed products can be improved with the addition of these nanoparticles. They not only aid in foamability but also act as nucleating agents by controlling the morphological properties of the foamed material. Here, we provide a critical and accessible overview of the influence of CN particles on the properties of biodegradable foams; in particular, their rheological, thermal, mechanical, and flammability and thermal insulating properties and biodegradability.

Determination of adhesive acrylates in recycled polyethylene terephthalate by fabric phase sorptive extraction coupled to ultra performance liquid chromatography - mass spectrometry

This article presents fabric phase sorptive extraction (FPSE) as a simple and effective pre-concentration method for the enrichment of acrylate compounds in different food simulants and subsequent analysis of the extracts by ultra-high-performance liquid chromatography with mass spectrometric detection (UPLC-MS). Acrylate compounds come from acrylic adhesives used commonly for sticking the paper labels on polyethylene terephthalate (PET) bottles and therefore, they may exist in recycled polyethylene terephthalate (rPET). Four acrylates were studied: ethylene glycol dimethacrylate (EGDM), pentaerythritol triacrylate (PETA), triethylene glycol diacrylate (TEGDA) and trimethylolpropane triacrylate (TMPTA). Five different types of FPSE media coated with different sol-gel sorbents were studied and finally sol-gel polyethylene glycol- polypropylene glycol-polyethylene glycol triblock copolymer (PEG-PPG-PEG) coated FPSE media was chosen for its satisfactory results. The optimal conditions affecting the extraction efficiency of compounds were determined in three different food simulants. Statistical evaluation of this method reveals good linearity and precision. Under the optimized conditions, the method provided limits of detection of the compounds in the range of (0.1-1.9 ng g^-1, 0.1-1.2 ng g^-1, 0.2-2.3 ng g^-1) in EtOH 10%, HAc 3% and EtOH 20% and the enrichment factor values (EFs) after applying N₂ were in the range of 11.1-25.0, 13.8-26.3, 8.3-21.9, in simulants A, B and C respectively. The optimized method was applied successfully to analyze thirteen types of recycled PET samples. Acrylates were found in some of the samples at ng g^-1 levels.

Biodegradation of Polystyrene by Dark ( Tenebrio obscurus) and Yellow ( Tenebrio molitor) Mealworms (Coleoptera: Tenebrionidae)

Yellow mealworms (larvae of Tenebrio molitor, Coleoptera: Tenebrionidae) have been proven to be capable of biodegrading polystyrene (PS) products. Using four geographic sources, we found that dark mealworms (larvae of Tenebrio obscurus) ate PS as well. We subsequently tested T. obscurus from Shandong, China for PS degradation capability. Our results demonstrated the ability for PS degradation within the gut of T. obscurus at greater rates than T. molitor. With expanded PS foam as the sole diet, the specific PS consumption rates for T. obscurus and T. molitor at similar sizes (2.0 cm, 62-64 mg per larva) were 32.44 ± 0.51 and 24.30 ± 1.34 mg 100 larvae^-1 d^-1, respectively. After 31 days, the molecular weight ( M_n) of residual PS in frass (excrement) of T. obscurus decreased by 26.03%, remarkably higher than that of T. molitor (11.67%). Fourier transform infrared spectroscopy (FTIR) indicated formation of functional groups of intermediates and chemical modification. Thermo gravimetric analysis (TGA) suggested that T. obscurus larvae degraded PS effectively based on the proportion of PS residue. Co-fed corn flour to T. obscurus and wheat bran to T. molitor increased total PS consumption by 11.6% and 15.2%, respectively. Antibiotic gentamicin almost completely inhibited PS depolymerization. High-throughput sequencing revealed significant shifts in the gut microbial community in both Tenebrio species that were associated with the PS diet and PS biodegradation, with changes in three predominant families (Enterobacteriaceae, Spiroplasmataceae, and Enterococcaceae). The results indicate that PS biodegradability may be ubiquitous within the Tenebrio genus which could provide a bioresource for plastic waste biodegradation.

Recyclability of four types of plastics exposed to UV irradiation in a marine environment

Plastics are the most abundant products in the world and therefore also represent the largest volume of materials found in the sea. Their resistance to degradation makes them dangerous for the marine environment. In this study, the degradation of the four main plastics (Nylon, Polyethylene (PE), Polypropylene (PP), Polyethylene terephthalate (PET)) found in the sea was observed for 6.5 months as they were exposed to UV irradiation in a marine environment. Data on changes in the physical and chemical properties of each of them were collected in order to evaluate the possibilities of material (mechanical) recycling. A thermobalance was used to look for differences in the thermal decomposition of the plastics during this time. In addition, the mechanical properties of each plastic were studied. Results showed that both thermal and mechanical properties were affected, causing a weakening of the material which became less elastic and more rigid. Furthermore, SEM and AFM images were obtained: they showed cracks, flakes and granular oxidation as well as a loss of homogeneity on the surface of the samples. These changes make mechanical recycling unfeasible, since the quality of the recycled material is insufficient to ensure a high virgin material substitution rate.

Biodegradation of Polyethylene and Plastic Mixtures in Mealworms (Larvae of Tenebrio molitor) and Effects on the Gut Microbiome

Recent studies have demonstrated the ability for polystyrene (PS) degradation within the gut of mealworms ( Tenebrio molitor). To determine whether plastics may be broadly susceptible to biodegradation within mealworms, we evaluated the fate of polyethylene (PE) and mixtures (PE + PS). We find that PE biodegrades at comparable rates to PS. Mass balances indicate conversion of up 49.0 ± 1.4% of the ingested PE into a putative gas fraction (CO₂). The molecular weights ( M_n) of egested polymer residues decreased by 40.1 ± 8.5% in PE-fed mealworms and by 12.8 ± 3.1% in PS-fed mealworms. NMR and FTIR analyses revealed chemical modifications consistent with degradation and partial oxidation of the polymer. Mixtures likewise degraded. Our results are consistent with a nonspecific degradation mechanism. Analysis of the gut microbiome by next-generation sequencing revealed two OTUs ( Citrobacter sp. and Kosakonia sp.) strongly associated with both PE and PS as well as OTUs unique to each plastic. Our results suggest that adaptability of the mealworm gut microbiome enables degradation of chemically dissimilar plastics.