Monitoring arsenic in the environment: a review of science and technologies with the potential for field measurements

Imparting As(III) Responsiveness to the Choline Response Transcriptional Regulator BetI

The development of a low-cost and user-friendly sensor using microorganisms to monitor the presence of As(III) on earth has garnered significant attention. In conventional research on microbial As(III) sensors, the focus has been on transcription factor ArsR, which plays a role in As(III) metabolism. However, we recently discovered that LuxR, a quorum-sensing control factor in Vibrio fischeri that contains multiple cysteine residues, acted as an As(III) sensor despite having no role in As(III) metabolism. This finding suggested that any protein could be an As(III) sensor if cysteine residues were incorporated. In this study, we aimed to confer As(III) responsiveness to BetI, a transcriptional repressor of the TetR family involved in osmotic regulation of the choline response, unrelated to As(III) metabolism. Based on the BetI structure constructed using molecular dynamics calculations, we generated a series of mutants in which each of the three amino acids not critical for function was substituted with cysteine. Subsequent examination of their response to As(III) revealed that the cysteine-substituted mutant, incorporating all three substitutions, demonstrated As(III) responsiveness. This was evidenced by the fluorescence intensity of the downstream reporter superfolder green fluorescent protein expression regulated by the operator region. Intriguingly, the BetI cysteine mutant maintained its binding responsiveness to the natural ligand choline. We successfully engineered an OR logic gate capable of responding to two orthogonal ligands using a single protein.

Nanomaterial-based optical colorimetric sensors for rapid monitoring of inorganic arsenic species: a review

Health concerns about the toxicity of arsenic compounds have therefore encouraged the development of new analytical tools for quick monitoring of arsenic in real samples with improved sensitivity, selectivity, and reliability. An overview of advanced optical colorimetric sensor techniques for real-time monitoring of inorganic arsenic species in the environment is given in this review paper. Herein, several advanced optical colorimetric sensor techniques for arsenite (As+3) and arsenate (As+5) based on doping chromogenic dyes/reagents, biomolecule-modified nanomaterials, and arsenic-binding ligand tethered nanomaterials are introduced and discussed. This review also highlights the benefits and limitations of the colorimetric sensor for arsenic species. Finally, prospects and future developments of an optical colorimetric sensor for arsenic species are also proposed. For future study in this sector, particularly for field application, authors recommend this review paper will be helpful for readers to understand the design principles and their corresponding sensing mechanisms of various arsenic optical colorimetric sensors.

Race/ethnicity and sex differences in the association between area-level arsenic exposure concentration and hepatocellular carcinoma (HCC) incidence rates in Texas. An ecological study

INTRODUCTION

Texas has the highest rates of hepatocellular carcinoma (HCC) in the United States. Exposure to toxicants may play a role in liver disease. Several mechanisms of arsenic carcinogenesis have been proposed, however, the evidence in human populations is limited to associations between HCC and ingestion of arsenic-contaminated drinking water. Through an ecological study, we examined associations between ambient arsenic and HCC incidence rates.

METHODS

Primary outcome was HCC incidence rates based on Texas Cancer Registry (TCR) data. Primary exposure of interest was the simulated census-tract level estimate of arsenic exposure concentration (EC) from the U.S. Environmental Protection Agency 2011 National Air Toxics Assessment (NATA). We analyzed the association between the arsenic EC and HCC using the negative binomial Poisson regression model separately for six study groups that were based on race/ethnicity and sex. We adjusted the main analyses for selected characteristics.

RESULTS

Texas has 5265 census tracts and TCR reported 18,235 new ≥20 years old HCC diagnoses between 2007 and 2015. We observed significant differences along racial-ethnic and sex groups while accounting for socioeconomic deprivation, urban/rural residency, and senior residents' health insurance status. Census tracts with the highest arsenic EC had elevated rates of HCC among NH black men (Quintile 5 vs. Quintile 1: IRR = 2.18, 95% CI: 1.66-2.86), NH black women (Quintile 5 vs. Quintile 1: IRR = 1.72, 95% CI: 1.33-2.22) and NH white men (Quintile 5 vs. Quintile 1: IRR = 1.38, 95% CI: 1.24-1.54). The associations in the remaining study groups were either inconsistent or attenuated.

CONCLUSIONS

Our finding suggests a potential inhalation pathway for the Arsenic-HCC association; however, the ecological nature of our study precludes the interpretation of a causal link between exposure to aerial arsenic and HCC. This finding needs to be further examined in cohort studies.

Application of surface-enhanced Raman scattering to qualitative and quantitative analysis of arsenic species

Given the toxicity of arsenic, there is an urgent need for the development of efficient and reliable detection systems. Raman spectroscopy, a powerful tool for material characterization and analysis, can be used to explore the properties of a wide range of different materials. Surface-enhanced Raman spectroscopy (SERS) can detect low concentrations of chemicals. This review focuses on the progress of qualitative and quantitative studies of the adsorption processes of inorganic arsenic and organic arsenic in aqueous media using Raman spectroscopy in recent years and discusses the application of Raman spectroscopy theory simulations to arsenic adsorption processes. Sliver nanoparticles are generally used as the SERS substrate to detect arsenic. Inorganic arsenic is chemisorbed onto the silver surface by forming As-O-Ag bonds, and the Raman shift difference in the As-O stretching (∼60 cm-1) between As(V) and As(III) allows SERS to detect and distinguish between As(V) and As(III) in groundwater samples. For organic arsenicals, specific compounds can be identified based on spectral differences in the vibration modes of the chemical bonds. Under the same laser excitation, the intensity of the Raman spectra for different arsenic concentrations is linearly related to the concentration, thus allowing quantitative analysis of arsenic. Molecular modeling of adsorbed analytes via density functional theory calculation (DFT) can predict the Raman shifts of analytes in different laser wavelengths.

BODIPY as a Multifunctional Theranostic Reagent in Biomedicine: Self-Assembly, Properties, and Applications

The use of boron dipyrromethene (BODIPY) in biomedicine is reviewed. To open, its synthesis and regulatory strategies are summarized, and inspiring cutting-edge work in post-functionalization strategies is highlighted. A brief overview of assembly model of BODIPY is then provided: BODIPY is introduced as a promising building block for the formation of single- and multicomponent self-assembled systems, including nanostructures suitable for aqueous environments, thereby showing the great development potential of supramolecular assembly in biomedicine applications. The frontier progress of BODIPY in biomedical application is thereafter described, supported by examples of the frontiers of biomedical applications of BODIPY-containing smart materials: it mainly involves the application of materials based on BODIPY building blocks and their assemblies in fluorescence bioimaging, photoacoustic imaging, disease treatment including photodynamic therapy, photothermal therapy, and immunotherapy. Lastly, not only the current status of the BODIPY family in the biomedical field but also the challenges worth considering are summarized. At the same time, insights into the future development prospects of biomedically applicable BODIPY are provided.

How heavy metal stress affects the growth and development of pulse crops: insights into germination and physiological processes

The current work is an extensive review addressing the effects of heavy metals in major pulse crops such as Chickpea (Cicer arietinum L.), Pea (Pisum sativum L.), Pigeonpea (Cajanus cajan L.), Mung bean (Vigna radiata L.), Black gram (Vigna mungo L.) and Lentil (Lens culinaris Medik.). Pulses are important contributors to the global food supply in the world, due to their vast beneficial properties in providing protein, nutritional value and health benefits to the human population. Several studies have reported that heavy metals are injurious to plants causing inhibition in plant germination, a decrease in the root and shoot length, reduction in respiration rate and photosynthesis. Properly disposing of heavy metal wastes has become an increasingly difficult task to solve in developed countries. Heavy metals pose one of the substantial constraints to pulse crops growth and productivity even at low concentrations. This article attempts to present the morphological, biochemical and various physiological changes induced on the pulse crops grown under various heavy metal stress such as As, Cd, Cr, Cu, Pb, and Ni.

A critical review of on-site inorganic arsenic screening methods

Approximately 94 to 220 million people worldwide are at risk of drinking well water containing arsenic > 10 µg/L, the WHO guideline value. To identify non-compliant domestic wells, assess health risks and reduce exposure, accurate and rapid on-site inorganic arsenic screening methods are desirable because all domestic wells worldwide need to be tested. Here, the principles, advantages and limitations of commonly used colorimetry, electrochemistry, and biosensing methods are critically reviewed, with the performance compared with laboratory-based benchmark methods. Most commercial kits are based on the classic Gutzeit reaction. Despite being semi-quantitative, the more recent and more expensive products display improved and acceptable accuracy and shorter testing time (∼10 min). Carried out by trained professionals, electrochemical methods are also feasible for on-site analysis, although miniaturization is desirable yet challenging. Biosensing using whole bacterial cells or bio-engineered materials such as aptamers is promising, if incorporated with function specific nanomaterials and biomaterials. Since arsenic is frequently found as arsenite in reducing groundwater and subject to oxidation during sampling, transportation and storage, on-site separation and sample preservation are feasible but the specific methods should be chosen based on sample matrix and tested before use. To eliminate arsenic exposure among hundreds of millions of mostly rural residents worldwide, we call for concerted efforts in research community and regulatory authority to develop accurate, rapid, and affordable tests for on-site screening and monitoring of arsenic in drinking water. Access to affordable testing will benefit people who are socioeconomically disadvantaged.

Detection of Phenylarsine Oxide in Drinking Water Using an Impedimetric Electrochemical Sensor with Gelatin-Based Solid Electrolyte Enriched with Mercaptoethanol: A Novel Prospective Green Biosensor Methodology

A simple, inexpensive, rapid, and label-free detection of phenylarsine oxide (PAO) in the field is a significant and unmet need because of its fatally acute and chronic effects on human health. A simple, fast, sensitive, and relatively low-cost arsenic detection system with an eco-friendly sensor could fill this gap. To monitor arsenic in situ, a reliable, portable impedimetric electrochemical sensor is the most suitable platform, which is real-time, fast, low-cost, and easy to design and use and has high sensitivity at low detection limits in the nanogram per mL range. The detection system in this study has a patent-applied green sensor with minimum harm to nature and the potential to dissolve in nature. The electrode containing 15 mL of distilled water (DIW) + 2 g gelatin + 1.75 g glycerol was determined to be the most suitable for determining the amount of inorganic arsenic in the range of 1-100 ng/mL using a gelatin-based solid electrochemical sensor enriched with 2-mercaptoethanol. Impedance measurements were performed to analyze the stability of the sensor in both deionized water and drinking water, as well as for arsenic detection. Among the procedures examined, the procedure prepared with 15 mL DIW + 2 g glycerol + 1.75 g gelatin resulted in the best stability in aqueous medium and in sensitivity with resistance changes (-ΔR _ct (%)) of 12% (±0.62%), 26% (±2.3%), and 40% (±3.8%) for the concentrations of 1, 10, and 100 ng/mL PAO in drinking water, respectively. With this detection methodology, there is the potential to detect not only arsenic but also other heavy metals in waters and different biomarkers in human fluids.

A Green Approach Based on Micro-X-ray Fluorescence for Arsenic, Micro- and Macronutrients Detection in Pteris vittata

In this study, benchtop micro-X-ray fluorescence spectrometry (µXRF) was evaluated as a green and cost-effective multielemental analytical technique for P. vittata. Here, we compare the arsenic (As) content values obtained from the same samples by µXRF and inductively coupled plasma-optical emissions spectrometry (ICP–OES). To obtain samples with different As concentrations, fronds at different growth time points were collected from P. vittata plants grown on two natural As-rich soils with either high or moderate As (750 and 58 mg/kg). Dried samples were evaluated using multielement-µXRF analysis and processed by PCA. The same samples were then analysed for multielement concentrations by ICP–OES. We show that As concentrations detected by ICP–OES, ranging from 0 to 3300 mg/kg, were comparable to those obtained by µXRF. Similar reliability was obtained for micro- and macronutrient concentrations. A positive correlation between As and potassium (K) contents and a negative correlation between As and iron (Fe), calcium (Ca) and manganese (Mn) contents were found at both high and moderate As. In conclusion, we demonstrate that this methodological approach based on μXRF analysis is suitable for monitoring the As and element contents in dried plant tissues without any chemical treatment of samples and that changes in most nutrient concentrations can be strictly related to the As content in plant tissue.

Rapid ultrasensitive detection of hexavalent chromium in soil and groundwater by a microProbing imaging platform

Rapid detection methods are needed to investigate the environmental quality risk of soil and groundwater in contaminated lands. Currently there is lack of rapid detection methods to sensitively and accurately analyze contaminations of hexavalent chromium in soil due to the challenge of complex sample pretreatment or expensive instrumentation. Here we report a rapid accurate detection platform for quantifying hexavalent chromium in soil and groundwater with ultrasensitivity. The platform consists of a novel sensor of microProbing beads and a portable microscope. Each microProbing bead was a nanoliter reactor to selectively sequestrate Cr (VI) with the enrichment factor up to 150 ×. The microProbing beads presented the signal uniformity of ~97% for the statistical colorimetric imaging analysis. Combined with a miniaturized microscope, the microProbing beads allowed for detecting aqueous Cr (VI) and soluble Cr (VI) in soil within 45 min. The platform achieved high sensitivity with the detection limits of 0.003 ppb for aqueous Cr (VI) and 0.07 ppm for soil Cr (VI). It accurately detected soil and groundwater samples from a chromium contaminated land in Yangtze River Basin of China. The consistency to the laboratory standard methods was achieved with the low cost of ~0.20 US dollar per test. The microProbing imaging platform with the operational simplicity and device portability is highly promising for the field analysis of Cr (VI) in contaminated lands.

Effect of O-substitution in imidazole based Zn(II) dual fluorescent probes in the light of arsenate detection in potable water: a combined experimental and theoretical approach

Efficient detection of arsenate (AsO₄^3-) from contaminated drinking water extracted from underground has become a matter of utmost necessity and an exquisite challenge owing to the growing public health issue due to arsenicosis. In order to combat this we planned to detect arsenate with the naked eye under UV light using a novel chemosensor material whose structure and functioning as a sensor could be certified mechanistically. Hence we were encouraged to synthesize two differently O-substituted imidazole based homologous ligands: C1 (HL¹ = 2-((E)-(3-(1H-imidazole-1-yl)propylimino)methyl)-6-ethoxyphenol) and C2 (HL² = 2-((E)-(3-(1H-imidazole-1-yl)propylimino)methyl)-6-methoxyphenol). To accomplish the purposeful exploration of the luminescent sensor, we considered Chelation Enhanced Fluorescence (CHEF) and kept on searching for a metal cation that would be able to turn on the fluorescence of the ligands. Considering Zn(II) as the most suitable candidate, luminescent complexes D1 and D2 ({[Zn₂(L¹)₂(I)₂](DMF)} and [Zn₂(L²)₂(I)₂](DMF), respectively) were synthesized and characterized by SXRD, UV-Vis, FT-IR, and photoluminescence spectroscopy. In spite of the resemblance in the solid state structures of D1 and D2, the selective response of D1 towards arsenate with high quenching constants (2.13 × 10⁶), unlike D2, has been demonstrated mechanistically with steady state and time resolved fluorescence titration, solution phase ESI-MS spectral analysis and DFT studies. The selectivity and sensitivity of the sensor D1 explicitly make this material a potent candidate for arsenate detection due to its very low detection limit (8.2 ppb), low cost and user friendly characteristics. Real life implementation of this work in a test strip is expected to prove beneficial for public health to identify arsenate polluted water.

Improved On-Site Characterization of Arsenic in Gypsum from Waste Plasterboards Using Smart Devices

The impurities in waste plasterboards, a product of ethical demolition, are a serious problem for their recycling. Plasterboards, the wall materials used in old buildings, are often recycled into gypsum powder for various applications, including ground stabilization. However, this powder contains various chemical impurities from the original production process of the gypsum itself, and such impurities pose a risk of polluting the surrounding soil. Here, we present a simple method for verifying the presence of arsenic, a harmful element in recycled gypsum that is suitable for use at demolition sites. First, we developed a simple pretreatment method using a cation-exchange resin to dissolve insoluble gypsum suspended in water by exploiting a chemical equilibrium shift, and we estimated the quantity suitable for releasing the arsenic from arsenic-containing gypsum. This pretreated solution could then be tested with a conventional arsenic test kit by observing the color changes in the test paper using the image sensor of a smart device. This simple method could determine a wide range of arsenic quantities in the gypsum, which would be helpful for monitoring arsenic in recycled gypsum powder, thereby supporting the development of a safe circular economy for waste plasterboards.

Determination of Arsenic Content in Water Using a Silver Coordination Polymer

In this report, we describe a practical method for the colorimetric determination of dissolved inorganic arsenic content in water samples, using a silver coordination polymer as the sensing material. We demonstrate that a crystalline polymer framework can be used to stabilize silver(I) ions, greatly reducing both photosensitivity and water solubility, while still affording sufficient reactivity to detect arsenic in water samples at low parts-per-billion (ppb) levels. Test strips fabricated with the silver-based polymer are shown to be effective for field tests of groundwater under real-world operating conditions and display performance that is competitive with commercially available mercury-based test strips. Spectroscopic methods are also used to probe the reaction products formed, in order to better understand the sensing mechanism. Thus, our work provides the foundation for an improved field test that could be deployed to help manage groundwater usage in regions where arsenic contamination is problematic but sophisticated lab testing is not readily available.

Low-cost electrochemical detection of arsenic in the groundwater of Guanajuato state, central Mexico using an open-source potentiostat

Arsenic is a carcinogenic groundwater contaminant that is toxic even at the parts-per-billion (ppb) level and its on-site determination remains challenging. Colorimetric test strips, though cheap and widely used, often fail to give reliable quantitative data. On the other hand, electrochemical detection is sensitive and accurate but considerably more expensive at the onset. Here, we present a study on arsenic detection in groundwater using a low-cost, open-source potentiostat based on Arduino technology. We tested different types of gold electrodes (screen-printed and microwire) with anodic stripping voltammetry (ASV), achieving low detection limits (0.7 μg L^-1). In a study of arsenic contaminated groundwaters in Mexico, the microwire technique provides greater accuracy than test strips (reducing the median error from -50% to +2.9%) and greater precision (reducing uncertainties from ±25% to ±4.9%). Most importantly, the rate of false negatives versus the World Health Organisation’s 10 μg L^-1 limit was reduced from 50% to 0% (N = 13 samples). Arsenic determination using open-source potentiostats may offer a low-cost option for research groups and NGOs wishing to perform arsenic analysis in-house, yielding superior quantitative data than the more widely used colorimetric test strips.

Probe decorated porous silica and polymer monoliths as solid-state optical sensors and preconcentrators for the selective and fast recognition of ultra-trace arsenic ions

In this work, we manifested a new approach in designing solid-state colorimetric sensors for the selective optical sensing of As³⁺. The sensor fabrication is modulated using, (i) a cubic mesopores of ordered silica monolith, and (ii) a bimodal macro-/meso-porous polymer monolith, as hosting templates that are immobilized with a tailor-made chromoionophoric probe (DFBEP). The surface morphology and structural dimensions of the monolith templates and the sensor materials are characterized using p-XRD, XPS, FE-SEM-EDAX, HR-TEM-SAED, FT-IR, TGA, and BET/BJH analysis. The sensing components such as pH, probe content, sensor dosage, kinetics, temperature, analyte concentration, linear response range, selectivity, and sensitivity are optimized to arrive at the best sensing conditions. The silica and polymer-based monolithic sensors show a linear spectral response in the concentration range of 2-300 and 2-200 ppb, with a detection limit of 0.87 and 0.75 ppb for As³⁺, respectively. The real-time ion-monitoring propensity of the sensors is tested with spiked synthetic and real water samples, with a recovery efficiency of ≥99.1% (RSD ≤1.57%). The sensors act as both naked-eye optical sensors and preconcentrators, with a response time of ≤2.5 min. The molecular and photophysical properties of the DFBEP-As³⁺ complex are studied by TD-DFT calculations, using the B3LYP/6-31G (d,p) method.

A review on sources, identification and treatment strategies for the removal of toxic Arsenic from water system

Arsenic liberation and accumulation in the groundwater environment are both affected by the presence of primary ions and soluble organic matter. The most important influencing role in the co-occurrence is caused by human activity, which includes logging, agricultural runoff stream, food, tobacco, and fertilizers. Furthermore, it covers a wide range of developed and emerging technologies for removing arsenic impurities from the ecosystem, including adsorption, ion exchangers, bio sorption, coagulation and flocculation, membrane technology and electrochemical methods. This review thoroughly explores various arsenic toxicity to the atmosphere and the removal methods involved with them. To begin, the analysis focuses on the general context of arsenic outbreaks in the area, health risks associated with arsenic, and measuring techniques. The utilization of innovative functional substances such as graphite oxides, metal organic structures, carbon nanotubes, and other emerging types of composite materials, as well as the ease, reduced price, and simple operating method of the adsorbent material, are better potential alternatives for arsenic removal. The aim of this article is to examine the origins of arsenic, as well as identification and treatment methods. It also addressed recent advancements in Arsenic removal using graphite oxides, carbon nanotubes, metal organic structures, magnetic nano composites, and other novel types of usable materials. Under ideal conditions for the above methods, the arsenic removal will achieve nearly 99% in lab scale.

Preparation of GO/Fe3O4@PMDA/AuNPs nanocomposite for simultaneous determination of As3+ and Cu2+ by stripping voltammetry

One of the critical challenges in the simultaneous determination of As³⁺ and Cu²⁺ by stripping voltammetry is the overlapping of their oxidation peaks. Therefore, the engineering of nanostructured sensors in order to uplift their electrochemical performance is a significant issue for the codetection of As³⁺ and Cu²⁺. Herein, we modified a glassy carbon electrode with a new nanocomposite based on poly methyldopa along with gold nanoparticles immobilized on the surface of magnetic graphene oxide (GCE/GO/Fe₃O₄@PMDA/AuNPs) that can determine As³⁺ and Cu²⁺ with great sensitivity. Optimization of the measurement conditions by square wave stripping voltammetry (SWSV) caused the oxidation peaks of As³⁺ and Cu²⁺ to be distinguished significantly from each other, while the peak currents of As³⁺ and Cu²⁺ increased 9-12 fold, respectively, compared to the bare electrode. The proposed electrode exhibits low detection limits (S/N ≥ 3): 0.15 ppb for As³⁺ and 0.11 ppb for Cu²⁺. The GCE/GO/Fe₃O₄@PMDA/AuNPs also has good linearity over a wide concentration range from 5 to 500 ppb for As³⁺ and 0.5-750 ppb for Cu²⁺. The good recovery values were obtained for the analysis of As³⁺ and Cu²⁺ in pool and drinking water samples.

Recent development of chromogenic and fluorogenic chemosensors for the detection of arsenic species: Environmental and biological applications

Due to biological and environmental significance of highly toxic arsenic species, the design, synthesis and development of chemosensors for arsenic species has been a very active research field in recent times. In this review, we summarize recent works on the sensing mechanisms employed by fluorometric/colorimetric chemosensors and their applications in arsenic detection. Various types of sensing strategies can be categorized into six types including (i) chemosensors based on hydrogen bonding interactions; (ii) aggregation induced emission (AIE) based chemosensors; (iii) chemodosimetric approach (reaction-based chemosensors); (iv) metal coordination-based sensing strategy; (v) chemosensors based on metal complex displacement approach and (vi) metal complex as chemosensor. All these sensing strategies are very much simple and sensitive for use in the design of arsenic selective chromogenic and fluorogenic probes.

Linker-Free Magnetite-Decorated Gold Nanoparticles (Fe3O4-Au): Synthesis, Characterization, and Application for Electrochemical Detection of Arsenic (III)

Linker-free magnetite nanoparticles (Fe3O4NPs)-decorated gold nanoparticles (AuNPs) were grown using a new protocol that can be used as a new platform for synthesis of other intact metal-metal oxide nanocomposites without the need for linkers. This minimizes the distance between the metal and metal oxide nanoparticles and ensures the optimum combined effects between the two material interfaces. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy confirmed the successful synthesis of the Fe3O4-Au nanocomposite, without any change in the magnetite phase. Characterization, using transmission electron microscopy (TEM), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy, revealed the composite to consist of AuNPs of 70 ± 10 nm diameter decorated with tiny 10 ± 3 nm diameter Fe3O4NPs in Au:Fe mass ratio of 5:1. The prepared Fe3O4-Au nanocomposite was embedded in ionic liquid (IL) and applied for the modification of glassy carbon electrode (GCE) for the electrochemical detection of As(III) in water. By combining the excellent catalytic properties of the AuNPs with the high adsorption capacity of the tiny Fe3O4NPs towards As(III), as well as the good conductivity of IL, the Fe3O4-Au-IL nanocomposite showed excellent performance in the square wave anodic stripping voltammetry detection of As(III). Under the optimized conditions, a linear range of 1 to 100 μg/L was achieved with a detection limit of 0.22 μg/L (S/N = 3), and no interference from 100-fold higher concentrations of a wide variety of cations and anions found in water. A very low residual standard deviation of 1.16% confirmed the high precision/reproducibility of As(III) analysis and the reliability of the Fe3O4-Au-IL sensing interface. Finally, this proposed sensing interface was successfully applied to analyzing synthetic river and wastewater samples with a 95-101% recovery, demonstrating excellent accuracy, even in complex synthetic river and wastewater samples containing high concentrations of humic acid without any sample pretreatments.

Plant Nanobionic Sensors for Arsenic Detection

Arsenic is a highly toxic heavy-metal pollutant which poses a significant health risk to humans and other ecosystems. In this work, the natural ability of wild-type plants to pre-concentrate and extract arsenic from the belowground environment is exploited to engineer plant nanobionic sensors for real-time arsenic detection. Near-infrared fluorescent nanosensors are specifically designed for sensitive and selective detection of arsenite. These optical nanosensors are embedded in plant tissues to non-destructively access and monitor the internal dynamics of arsenic taken up by the plants via the roots. The integration of optical nanosensors with living plants enables the conversion of plants into self-powered autosamplers of arsenic from their environment. Arsenite detection is demonstrated with three different plant species as nanobionic sensors. Based on an experimentally validated kinetic model, the nanobionic sensor could detect 0.6 and 0.2 ppb levels of arsenic after 7 and 14 days respectively by exploiting the natural ability of Pteris cretica ferns to hyperaccumulate and tolerate exceptionally high level of arsenic. The sensor readout could also be interfaced with portable electronics at a standoff distance, potentially enabling applications in environmental monitoring and agronomic research.

Nano-Enabled sensors for detection of arsenic in water

The elevated cases of arsenic contamination reported across the globe have made its early detection and remediation an active area of research. Although, the World Health Organisation has set the maximum provisional value for arsenic in drinking water at 10 parts per billion, yet concentrations as high as 5000 parts per billion are still reported. In human beings, chronic arsenic exposure can culminate into lethal diseases such as cancer. Thus, there is a need for urgent emergence of efficient and reliable detection system. This paper offers an overview of the state-of-art knowledge on current arsenic detection mechanisms. The central agenda of this paper is to develop an understanding into the nano-enabled methods for arsenic detection with an emphasis on strategic fabrication of nanostructures and the modulation of nanomaterial chemistry in order to strengthen the knowledge into novel nano-enabled solutions for arsenic contamination. Towards the end prospects for arsenic detection in water are also prompted.

A Sensitive Magnetic Arsenite-Specific Biosensor Hosted in Magnetotactic Bacteria

According to the World Health Organization, arsenic is the water contaminant that affects the largest number of people worldwide. To limit its impact on the population, inexpensive, quick, and easy-to-use systems of detection are required. One promising solution could be the use of whole-cell biosensors, which have been extensively studied and could meet all these criteria even though they often lack sensitivity. Here, we investigated the benefit of using magnetotactic bacteria as cellular chassis to design and build sensitive magnetic bacterial biosensors. Promoters potentially inducible by arsenic were first identified in silico within the genomes of two magnetotactic bacteria strains, Magnetospirillum magneticum AMB-1 and Magnetospirillum gryphiswaldense MSR-1. The ArsR-dependent regulation was confirmed by reverse transcription-PCR experiments. Biosensors built by transcriptional fusion between the arsenic-inducible promoters and the bacterial luciferase luxCDABE operon gave an element-specific response in 30 min with an arsenite detection limit of 0.5 μM. After magnetic concentration, we improved the sensitivity of the biosensor by a factor of 50 to reach 10 nM, more than 1 order of magnitude below the recommended guidelines for arsenic in drinking water (0.13 μM). Finally, we demonstrated the successful preservation of the magnetic bacterium biosensors by freeze-drying.IMPORTANCE Whole-cell biosensors based on reporter genes can be designed for heavy metal detection but often require the optimization of their sensitivity and specific adaptations for practical use in the field. Magnetotactic bacteria as cellular hosts for biosensors are interesting models, as their intrinsic magnetism permits them to be easily concentrated and entrapped to increase the arsenic-response signal. This paves the way for the development of sensitive and immobilized whole-cell biosensors tailored for use in the field.

Difluoroboron-Curcumin Doped Starch Film and Digital Image Colorimetry for Semi-Quantitative Analysis of Arsenic

This work presents a novel, simple, rapid, and cost effective method for semi-quantitative analysis of arsenic(III) in water sample. The method was based on the digital image colorimetry (DIC) of difluoroboron-curcumin doped starch film (BF₂-cur-film) and arsenic ion in water. A red BF₂-cur-film (9.4 μm) was fabricated by entrapped difluoroboron-curcumin (BF₂-curcumin, particle size of 60 - 113 nm) in tapioca starch film. When the standard solution of arsenic (1 mL) was added into small plastic tube containing BF₂-cur-film on its inner lid, blue solution (λ_max at 610 nm) was observed instead of orange color in blank solution (λ_max at 495 nm). When BF₂-cur-film was used in conjunction with DIC, a wide linear range of 0 - 10 mg L^-1 with good linearity (R² > 0.99) was obtained from green channel with low detection limit of 0.04 mg L^-1. Moreover, good precision (0.9 - 1.2%RSD, n = 4 days) and accuracy (0.03% relative error) were also achieved.

The in situ technique of aqueous binding concentration and diffusion for measurements of arsenate concentrations in lake waters

Arsenic contaminations in waters are concerned worldwide. This research was to examine an in situ method of aqueous binding concentration and diffusion (ABCD) technique with an aqueous solution of metal immobilized polycationic polymer (MIP) as a binding phase and a dialysis membrane as a diffusive layer to pre-concentrate trace arsenate in lake waters. Although the maximum binding capacity of arsenate to MIP was influenced by the presence of anions in water, the binding phase was capable of pre-concentrating arsenate in lake water. This in situ pre-concentration technique was combined with light emitting diodes (LED) for semi-on line detection of trace arsenate in waters. The system was eventually validated in lake waters in lab and in natural lake waters in China. In this work, new colorimetric method for detection of arsenate in the binding phase has been developed to minimize the potential spectra interferences of silicates, phosphates and other oxyanions. Potassium iodide was used to reduce arsenate to arsenite before the solution was mixed with the colour generation reagent of RhodamineB.

Evaluation of arsenic field test kits for drinking water: Recommendations for improvement and implications for arsenic affected regions such as Bangladesh

Arsenic field test kits are widely used to measure arsenic levels in drinking water sources, especially in countries like Bangladesh, where water supply is highly decentralized and water quality testing infrastructure is limited. From a public health perspective, the ability of a measurement technique to distinguish samples above and below relevant and actionable drinking water standards is paramount. In this study, the performance of eight commercially available field test kits was assessed by comparing kit estimates to hydride generation atomic absorption spectroscopy (HG-AAS) analyses. The results of tests that control for user-dependent color matching errors showed that two kits (LaMotte and Quick II kits) provided accurate and precise estimates of arsenic, four kits (Econo-Quick, Quick, Wagtech and Merck kits) were either accurate or precise, but not both, and two kits (Hach and Econo-Quick II kits) were neither accurate nor precise. Tests were performed for arsenic concentration ranges commonly found in natural waters and treated waters (such as community drinking water filter systems), and also on laboratory generated arsenic standards in DI water. For those kits that did not perform well, test strips often produced colors too light compared to manufacturer-provided arsenic color calibration charts. Based on these results, we recommend stakeholders carefully re-consider the use of poorly performing field test kits until better quality control of components of these kits is implemented. In addition, we recommend that field test kit manufacturers provide suitable internal standards in every kit box for users to verify the veracity of manufacturer provided color charts.

Development of a Highly Sensitive Whole-Cell Biosensor for Arsenite Detection through Engineered Promoter Modifications

Whole-cell biosensors have attracted considerable interests because they are robust, eco-friendly, and cost-effective. However, most of the biosensors harness the naturally occurring wild-type promoter, which often suffers from high background noise and low sensitivity. In this study, we demonstrate how to design the core elements (i.e., RNA polymerase binding site and transcription factor binding site) of the promoters to obtain a significant gain in the signal-to-noise output ratio of the whole-cell biosensor circuits. As a proof of concept, we modified the arsenite-regulated promoter from Escherichia coli K-12 genome, such that it has a lower background and higher expression. This was achieved by balancing the relationship between the number of ArsR binding sites (ABS) and the activity of the promoter and adjusting the location of the auxiliary ABS. A promoter variant ParsD-ABS-8 was obtained with an induction ratio of 179 (11-fold increase over the wild-type promoter) when induced with 1 μM arsenite. Importantly, the developed biosensor exhibited good dose-response in the range of 0.1 to 4 μM (R² = 0.9928) of arsenite with a detection limit of ca. 10 nM. These results indicated that the engineered promoter modification approach could be used to improve the performance of whole-cell biosensors, thereby facilitating their practical application.

Nanomaterial-based aptamer sensors for arsenic detection

Arsenic (As) is a highly toxic contaminant in the environment and a serious carcinogen for the human being. The toxicity of arsenic significantly threatens environmental and human health. The effective removing technology for arsenic remains challenging, and one of the reasons is due to the lack of powerful detection method in the complex environmental matrix. There is thus an urgent need to develop novel analytical methods for arsenic, preferably with the potential for the field-testing. To combat arsenic pollution and maintain a healthy environment and eco-system, many analytical methods have been developed for arsenic detection in various samples. Among these strategies, biosensors hold great promise for rapid detection of arsenic, in particular, nanomaterials-based aptamer sensors have attracted significant attention due to their simplicity, high sensitivity and rapidness. In this paper, we reviewed the recent development and applications of aptamer sensors (aptasensors) based-on nanomaterial for arsenic detection, in particular with emphasis on the works using optical and electrochemical technologies. We also discussed the recent novel technology in aptasensors development for arsenic detection, including nucleic acid amplification for signal enhancement and device integration for the portability of arsenic sensors. We are hoping this review could inspire further researches in developing novel nanotechnologies based aptasensors for possible on-site detection of arsenic.

A disposable acetylcholine esterase sensor for As(III) determination in groundwater matrix based on 4-acetoxyphenol hydrolysis

There is a lack of field compatible analytical method for the speciation of As(III) to characterize groundwater pollution at anthropogenic sites. To address this issue, an inhibition-based acetylcholine esterase (AchE) sensor was developed to determine As(III) in groundwater. 4-Acetoxyphenol was employed to develop an amperometric assay for AchE activity. This assay was used to guide the fabrication of an AchE sensor with screen-printed carbon electrode. An As(III) determination protocol was developed based on the pseudo-irreversible inhibition mechanism. The analysis has a dynamic range of 2-500 μM (150 - 37,500 μg L^-1) for As(III). The sensor exhibited the same dynamic range and sensitivity in a synthetic groundwater matrix. The electrode was stable for at least 150 days at 22 ± 2 °C.

Sequential Fluorescence Recognition of Molybdenum(VI), Arsenite, and Phosphate Ions in a Ratiometric Manner: A Facile Approach for Discrimination of AsO2 - and H2PO4. ACS OMEGA 2019;4:10877-10890. [PMID: 31460185 PMCID: PMC6648501 DOI: 10.1021/acsomega.9b00377]

An amide-based smart probe (L) is explored for nanomolar detection of Mo(VI) ion in a ratiometric manner, involving hydrogen-bond-assisted chelation-enhanced fluorescence process through inhibition of photoinduced electron transfer process. The recognition of Mo(VI) is associated with a 17-fold fluorescence enhancement and confirmed by single-crystal X-ray diffraction of the resulting Mo(VI) complex (M1). Further, M1 selectively recognizes arsenite through green emission of their adduct (C1) with an 81-fold fluorescence enhancement. Interestingly, dihydrogen phosphate causes dissociation of C1 back to free L having weak fluorescence. The methods are fast, highly selective, and allow their bare eye visualization at physiological pH. All of the interactions have been substantiated by time-dependent density functional theory calculations to rationalize their spectroscopic properties. The corresponding lowest detection limits are 1.5 × 10-8 M for Mo(VI), 1.2 × 10-10 M for AsO2 -, and 3.2 × 10-6 M for H2PO4 -, whereas the respective association constants are 4.21 × 105 M-1 for Mo(VI), 6.49 × 104 M-1 for AsO2 -, and 2.11 × 105 M-1 for H2PO4 -. The L is useful for efficient enrichment of Mo(VI) from aqueous solution, while M1 efficiently removes AsO2 - from environmental samples by solid-phase extraction.

CeO2 Nanowire-BODIPY-Adenosine Triphosphate Fluorescent Sensing Platform for Highly Specific and Sensitive Detection of Arsenate

Effective and sensitive monitoring of arsenate in drinking water is significant for risk management of public health. Here, we demonstrated that a CeO₂ nanowire acted as an efficient quencher for small fluorescent molecules with a phosphate group, BODIPY-adenosine triphosphate (BODIPY-ATP) and riboflavin-5'-phosphate (Rf-P), and developed a CeO₂ nanowire-BODIPY-ATP platform for highly selective and sensitive detection of arsenate. The response strategy was based on the competitive coordination chemistry of CeO₂ nanowire between arsenate and phosphate group of BODIPY-ATP. Arsenate displaced adsorbed BODIPY-ATP to enhance fluorescence, allowing detection of arsenate down to 7.8 nM, which is lower than the WHO-defined limit of 130 nM. An excellent linear range of 20-150 and 150-1000 nM was obtained. Importantly, this system was simple in design and convenient in operation. Also, the platform exhibited excellent selectivity for arsenate without the interference of phosphate ions. Finally, the proposed method had been successfully employed for determination of arsenate in real water samples.

Insights Into Arsenite and Arsenate Uptake Pathways Using a Whole Cell Biosensor

Despite its high toxicity and widespread occurrence in many parts of the world, arsenic (As) concentrations in decentralized water supplies such as domestic wells remain often unquantified. One limitation to effective monitoring is the high cost and lack of portability of current arsenic speciation techniques. Here, we present an arsenic biosensor assay capable of quantifying and determining the bioavailable fraction of arsenic species at environmentally relevant concentrations. First, we found that inorganic phosphate, a buffering agent and nutrient commonly found in most bioassay exposure media, was in fact limiting As(V) uptake, possibly explaining the variability in As(V) detection reported so far. Second, we show that the nature of the carbon source used in the bioassay differentially affects the response of the biosensor to As(III). Finally, our data support the existence of non-specific reduction pathways (non-ars encoded) that are responsible for the reduction of As(V) to As(III), allowing its detection by the biosensor. To validate our laboratory approach using field samples, we performed As(III) and As(V) standard additions on natural water samples collected from 17 lakes surrounding Giant Mine in Yellowknife (NWT), Canada. We found that legacy arsenic contamination in these lake water samples was accurately quantified by the biosensor. Interestingly, bioavailability of freshly added standards showed signs of matrix interference, indicative of dynamic interactions between As(III), As(V) and environmental constituents that have yet to be identified. Our results point toward dissolved organic carbon as possibly controlling these interactions, thus altering As bioavailability.

Engineering metal (hydr)oxide sorbents for removal of arsenate and similar weak-acid oxyanion contaminants: A critical review with emphasis on factors governing sorption processes

To create an integrative foundation for engineering of the next generation inexpensive sorbent systems, this critical review addresses the existing knowledge gap in factor/performance relationships between weak-acid oxyanion contaminants and metal (hydr)oxide sorbents. In-depth understanding of fundamental thermodynamics and kinetics mechanisms, material fabrication, and analytical and characterization techniques, is necessary to engineer sorbent that exhibit high capacity, selectivity, stability, durability and mass transport of contaminants under a wide range of operating and water matrix conditions requirements. From the perspective of thermodynamics and kinetics, this critical review examines the factors affecting sorbent performances and analyzes the existing research to elucidate future directions aimed at developing novel sorbents for removal of weak-acid oxyanion contaminants from water. Only sorbents that allow construction of simple and inexpensive water treatment systems adapted to overcome fiscal and technological barriers burdening small communities could pave the road for providing inexpensive potable water to millions of people. Novel sorbents, which exhibit (1) poor performances in realistic operating and water matrix conditions and/or (2) do not comply with the purely driven economics factors of production scalability or cost expectations, are predestined to never be commercialized.

Reactivity, vibrational spectroscopy, internal rotation and thermochemical aspects of methylarsine

The aim of this investigation was to perform a characterization of the spectroscopic and thermodynamic properties of methylarsine (CH₃AsH₂). Post-Hartree-Fock, 29 DFT methods and eight different composite methodologies were employed in these analyses. A comparison between harmonic and anharmonic frequency accuracies in reproducing the observable frequencies was performed here. In addition, the CH₃AsH₂→CH₂AsH₃ isomerization barrier energy was estimated in 100kcalmol^-1, whereas the H₂-release routes barrier heights were in the 45-107kcalmol^-1 range. A rate constant of 10^-66s^-1 was predicted regarding the isomerization route, while the CH₂AsH₃ hydrogen elimination mechanism is faster than the methylarsine one. The transition state structure of the CH₃AsH₂ internal rotational barrier energy varied between 1.0 and 1.4kcalmol^-1. For the CH₂AsH₃ internal rotation the estimated barrier heights varied 0.6-2.5kcalmol^-1. The adiabatic ionization energy and the heat of formation each structure was also calculated here.

The concentration and chemical speciation of arsenic in the Nanpan River, the upstream of the Pearl River, China

The concentration and chemical speciation of arsenic (As) in different environmental matrixes (water, sediment, agricultural soils, and non-agricultural soils) were investigated in the Nanpan River area, the upstream of Pearl River, China. The results did not show any obvious transport of As along the flow direction of the river (from upstream to downstream). Total As concentrations in sediment were significantly different from those in agricultural soil. According to the comparison to quality standards, the As in sediments of the studied area have potential ecological risks and a minority of the sampling sites of agricultural soils in the studied area were polluted with As. As speciations were analyzed using sequential extraction and the percentage of non-residual fraction in sediment predominated over residual fraction. We thus believe that As in the studied area was with low mobility and bioavailability in sediment, agricultural soils, and non-agricultural soils. However, the bioavailability and mobility of As in sediment were higher than in both agricultural and non-agricultural soils, and thus, special attention should be paid for the risk assessment of As in the river in future studies.

Remediation of arsenic contaminated soil by coupling oxalate washing with subsequent ZVI/Air treatment

The application of a novel coupled process with oxalate washing and subsequent zero-valent iron (ZVI)/Air treatment for remediation of arsenic contaminated soil was investigated in the present study. Oxalate is biodegradable and widely present in the environment. With addition of 0.1 mol L(-1) oxalate under circumneutral condition, 83.7% and 52.6% of arsenic could be removed from a spiked kaolin and an actual contaminated soil respectively. Much more oxalate adsorption on the actual soil was attributed to the higher soil organic matter and clay content. Interestingly, oxalate retained in the washing effluent could act as an organic ligand to promote the oxidation efficiency of ZVI/Air at near neutral pH. Compared with the absence of oxalate, much more As(III) was oxidized. Arsenic was effectively adsorbed on iron (hydr)oxides as the consumption of oxalate and the increase of pH value. For the actual soil washing effluent, about 94.9% of total arsenic was removed after 120 min's treatment without pH adjustment. It has been demonstrated that As(V) was the dominant arsenic speciation adsorbed on iron (hydr)oxides. This study provides a promising alternative for remediation of arsenic contaminated soil in view of its low cost and environmental benign.